You are on page 1of 24

Subtle-Energy Sense: Properly Selecting Subtle-Energy Devices

from Sedona Journal of Emergence, February 1997 Visit their Web Pages at http://www.sedonajo.com. Or subscribe (this is a magazine FULL of esoteric, spiritual, channeled, and new-technology material!) by contacting them at: Sedona Journal of Emergence!, P.O. Box 1526, Sedona, Arizona 86339 USA, Telephone 520-2826523 or 800-450-0985, Fax 520-282-4130 or 800-393-7017. by Michael Thau There are currently almost one thousand different subtle-energy technologies available for purchase. Devices of this kind range from foam-core pyramids (promoted as able to structure water) to complex scalar-wave medical devices to expensive computer-monitored "healing environments." Unknown to most consumers is that most subtle-energy technologies not only overstate their benefits, but also give the impression that other health-promoting activities such as exercise and diet can be reduced. After spending nearly a decade studying many of the subtle-energy devices on the market and discussing their design with their builders/inventors, it became certain that a number of these customers are not getting full value for their money, Selecting a subtle-energy device should be like choosing a primary-care physician. We avoid those health-care providers who have a bad reputation, do not stay on top of their specialty, have questionable motives and promote false or inflated claims regarding the quality of their work. When observing the field of subtle-energy research, I have noted that researchers promote three differing perspectives regarding subtle energies: (1) that these energies exist but do not affect organic life in any way; (2) that subtle energies are a "fifth force," distinctly different from the other four standard forces; or (3) that the variations and complexities of subtle energies manifest the four forces and elements that compose all force and matter. Regardless which perspective one values the most, many technologies are available in the marketplace that promote the idea that subtle energies can be used to improve physical health. Thus, consumers need sufficient information to make smart choices when choosing between subtleenergy devices and to learn how to spot the red flags when examining these devices. CONSTRUCTION CONSTRAINTS Unfortunately, some of the creators of subtle-energy devices are more concerned with selling a product than creating the finest product possible. Shortcuts and mass-produced materials along with design flaws almost always degrade a product's quality. For instance, massproduced molded plastic covers to house a subtle-energy device are, for reasons presented later, less desirable than custom-crafted dense wood housing. In many cases the excellence of one of these devices necessitates using only the best natural materials, which drives up the

price. This describes the real dilemma in producing a subtle-energy device: it must be inexpensive enough to sell well, yet manifest high-quality subtle energy, Thankfully, there are companies building inexpensive devices that produce subtle energies of better quality than some more expensive products. TERMINAL CONFUSION There are many terms for subtle energy, including od, orgone, scalar waves, chi, prana and tachyon and etheric energy. To reduce confusion I will use the terms etheric energy or subtle energy unless a specific term is associated with a particular technology. For example, I use the term orgone when discussing orgone-energy devices and scalar waves in discussing certain other electronic devices. MANIFESTING SUBTLE ENERGY Most builders of subtle-energy devices perceive that our normal physical space is a subset of a multidimensional Hilbert space, a difficult-to-detect matrix of invisible energy that permeates all matter and space. Changes in aspects of this matrix manifest as light, atoms or force in normal physical space. A subtle-energy device is therefore one that allows the subtle energy already present to manifest more easily by attuning the subatomic mass in physical space. I will divide this field, for the sake of discussion, into four approaches to manifesting subtle energies: electronic, sacred geometry, minor ones I will call miscellaneous, and combinations of these. Nearly all electronic subtle-energy tools are designed to collide specially phased electromagnetic [EM] waves, which will create areas of vacuum that release scalar waves. The apparatus can physically connect to the person being treated or can work at a distance; the latter fall under the category of radionics. The devices can be in the form of small black boxes, laptop computers, specially wound caduceus and Tesla coils, ultraviolet-ray probes or electrified-coil patterns such as the multiple-wave oscillator. Each has its advantages and disadvantages, depending upon design quality, use and specific capabilities. Frequency devices are the most prolific of the electronic devices, and the electronics are usually contained in a black box that the user wears or is connected to. The device then emits a healing frequency along with a scalar wave. These are considered less effective than some other electronic devices. One criticism is that although such devices often claim to emit the dominant Earth frequency, they fail to emit additional necessary frequencies, and thus the end result is less than optimal. Those working with sacred geometry believe that certain mathematically precise multidimensional matrices such as pyramids, dodecahedrons, moving spiral vortices and various other shapes generate subtle energies in and around the structure. On a subtle-energy level, properly shaped geometries allow the subatomic mass to act as a coherent unit, which generates more refined etheric energy and higher consciousness. Most sacred-geometry subtle-energy devices are unmoving structures that rest on a table or hang from the ceiling, but some are being marketed that have movement. Movement is not necessarily an

improvement, but if properly designed, it can be. There are many sacred-geometry technologies available for sale and, unfortunately, a significant portion have design and construction flaws that impair their effectiveness. The term miscellaneous technologies refers to a host of subtle-energy products that include inert-gas devices, orgone boxes and blankets, chi lamps, tachyon products, chi-impregnated objects and so forth. These products range in price from several dollars to many thousands. What is interesting is that in some cases the subtle-energy output of an inexpensive device in this category is preferable to that of a far more expensive one. Combination subtle-energy technologies refers to a mixture of several subtle-energy approaches. For example, when an inert-gas device (categorized as a miscellaneous technology) is placed inside a wooden dodecahedron (a sacred-geometry device), they work synergistically, resulting in an output greater than the sum of the output of the two devices operating separately. Another example of this synergistic effect is using computers to attune a patient's etheric and other subtle bodies while the patient is within an icosahedron-shaped enclosure. Combining two or more subtle-energy approaches will often produce powerful synergistic effects. COMPLEMENTING HEALTH People who wish to purchase a subtle-energy device do so occasionally to achieve greater physical health. But for a broad health program, one cannot rely on only one area and neglect all others. Experienced, reputable holistic health-care practitioners will declare that diet, exercise, exposure to air, water, soil and EM pollution, emotional stresses and genetic predispositions all have an impact on health. Therefore, subtle-energy technologies are an adjunct or complement to our attention toward these other areas. In a hypothetical situation, let's assume that Bob's diet, emotions and to some extent the indoor pollution he is exposed to daily allow him to manifest certain viruses in his blood, which then create various physical problems. Bob goes out and purchases the first electronic subtle-energy device he comes across that purportedly kills viruses in the blood over a sixweek period. Bob uses the device religiously, and indeed his health problems seem to vanish. Bob stops using the device and reports to the inventor that the device killed all his viruses and that he is now cured. Four weeks later the symptoms are back worse than ever and he feels miserable. What really happened? The above is an all-too-common scenario. In the above situation, five possible scenarios might have occurred. Scenario one: The technology might have been completely ineffective, but Bob convinced himself that the symptoms were gone due to the well-documented placebo effect, where the mind temporarily causes the body's adverse symptoms to go into remission due to a powerful subconscious belief.

Scenario two: An actual physiological remission unrelated to the placebo effect might have occurred at the same time Bob started using the technology, but the two events were unrelated. Scenario three; The technology might have worked, but caused a temporary rather than permanent change. Scenario four: The technology might have killed the viruses but stressed Bob's etheric body in the process, which then left the viruses able to return. Scenario five: The technology worked effectively to kill the viruses without weakening his etheric body, but Bob received new viruses from polluted tapwater that then replicated more easily due to emotional stress. The point is that subtle-energy technologies should be used as only one of many methods to promote health. The best of the available devices might be able to trigger healing, but we need to realize that proper health requires attention to multiple areas. To summarize, a subtle-energy device should be seen as a complement to our broader efforts on all fronts to restore and maintain our health, not as a crutch or magic bullet. BUYER BEWARE Then there is the issue of adverse effects. Despite what many salespeople say, if subtle energies can cause physiological and emotional change, then it cannot be safely assumed that such change is always for the better, For example, many manufacturers of subtle-energy devices use plastics and other oil-based substances in the housing or glues. These substances subtly affect the quality of the output in various ways. The petrochemical miasms (or other miasms) present in the user might be activated and lower the vibrational output of the subtle energy. The design of the device might be excellent, but a simple plastic. housing or drop of glue can reduce the overall output far lower than intended. When examining subtle-energy devices the consumer must realize that the plastics, glues (especially those containing acetic acid) and other nonnatural compounds not only lower the vibrational output, but can also adversely affect the etheric body and miasms of the user. How can plastics or glue affect the quality of a subtle-energy device? It is a fact that each element and compound has a vibrational frequency. If glues and plastics are in close proximity to a subtle-energy generator, their expression will color the overall output. For example, some people work with orgone technology wherein the layering of certain materials (organic and inorganic) is believed to produce a beneficial subtle-energy effect. Orgonedevice builders are usually aware of subtle-energy toxicity (low etheric vibration and disorganized etheric orientation) and thus avoid using petrochemical derivatives in the

manufacture of their devices. Nonetheless, novice users of orgone devices might well place it on a surface that has some degree of subtle-energy toxicity, after which that surface becomes part of the feedback of the device, drastically lowering the quality of the overall output. Thus not only the device itself but its physical contact with other materials when in use must be considered. ANALYZING SUBTLE-ENERGY OUTPUT There are two ways to gauge the quality of etheric energy that a particular subtle-energy device emits: through physical testing, using scientific apparatus, or through one's own intuition. Each has its merits and drawbacks. Dr. Glen Rein, director of Quantum Biology Research Lab, has discovered and refined three different methods to test the quality and quantity of subtle energy catalyzed by a device. The first is ultraviolet spectroscopy of water, which will absorb the subtle energies; different energies show different patterns of light absorption. Some energies show an increase and others a decrease compared to controls, but these effects are dependent on the wavelength, probably due to an effect on the electrons of the oxygen atoms. The second subtle-energy test relates to conformational changes in human DNA. Different types of energy/information cause DNA to either wind or unwind. This kinetic response can also be used to distinguish the different types of energy; for example, some will cause an immediate effect that will last for two hours, and so on. The third subtle-energy test refers to biological assays that measure the growth of human lymphocytes or other cells. Some information in subtle energy will increase growth and other information will reduce or inhibit further growth. Quantum Biology Research Lab can arrange for scientific testing of selected subtle-energy devices. Dr. Glen Rein's book Quantum Biology: Healing with Subtle Energy is also available through the catalog company, Tools for Exploration. Most of us do not have the luxury of being able to test all of the subtle-energy technologies scientifically, so we examine the device during operation and rely on our intuition to tell us if it is of sufficient quality. Of course, the coherency of our intuition will affect the understanding we obtain. RATING THE QUALITY OF SUBTLE-ENERGY OUTPUT

There are four broad areas to look at when evaluating the quality of energy put out by one of these devices: the light or spiritual consciousness it assists, and its degree and type of complexity, orientation and rarefaction. When working with subtle energy, it is to be noted that the energy is a slower, polarized lower-octave reflection of light, which itself is a lower octave of Source consciousness. Therefore, each subtle-energy field represents a specific bundle or packet of spiritual information for teaching within certain areas of growth. The excellent book The Principles of Energy by Milani and Smith discusses complexity quite nicely. Essentially, complexity refers to the fact that few subtle-energy technologies emit pure energy, but rather a mixture of energy and mass. Mass can be seen as one type of complexity, like the anu or anu combinations explained in Occult Chemistry by Leadbeater and Besant, wherein combinations of anu become subquarks as described in the book Extra-Sensory Perception of Quarks by Stephen M. Phillips, Ph.D. Ideally, a subtle energy would have zero complexity (mass) and be pure energy. Orientation refers to the degree of organization (coherency) the etheric energy manifests. Most subtle-energy devices manifest energies that are not arranged like those of an orderly crystalline matrix. Instead, it is as if the subtle energies within different spaces are doing their own thing, so to speak. There is a lack of focus or connectivity throughout the entire field. If the output of a device is incoherent, you might feel wild swings in the overall quality of the etheric energy or that the energy is not balanced. Any chaotic or random orientation of energy would be extremely difficult to assimilate into the body. Rarefactionis what some call vibration. It refers to the quality and balance of an etheric energy. The more rarefied it is, then the less mass, greater balance and more healing potential it has. Taken together, the optimum subtle-energy device will allow significant spiritual consciousness to manifest, have zero mass output, be approximately 95% or more coherent in its orientation and have exceptional rarefaction. When this occurs, etheric density (the normal etheric incoherence and complexity in the space around us) drops to zero. This means that the orientation and rarefaction of local etheric energy becomes coherent and rarefied and the higher spiritual energies are able to manifest without resistance. At zero etheric density the primary expression of the subtle energy changes from etheric to low-grade astral light. Exceptionally few subtle-energy devices exist today that operate at this level of healing. Those that do are called spiritual technologies. Builders of subtle-energy devices might not often reach this optimum for simple reasons, including the incorporation of low-vibration materials such as plastics and certain glues and the presence of low-rarefaction etheric energy in parts of the device. And sometimes there is a design flaw that blocks the free flow of energy. Although these flaws are often located in the energy-emitting part of the device, it is sometimes due to overall design obstacles.

RED FLAGS A red flag is a danger signal or general caution that should make you pause and become wary when examining a subtle-energy device. A red flag does not always mean that the technology should be avoided, but that the smart shopper ask further questions. Since it affects your health, it pays to be careful when dealing with the salesperson. The most obvious and common red flag is the implication that the device will cure cancer, AIDS or some other specific physical healing. Since many physical afflictions are a result of pollution, miasms and/or negative emotions, any device would have to eliminate those factors to permanently eliminate the physical affliction. Questions to ask include the following: (1) Have the benefits of this device been tested by an independent third party and if so, by whom? (2) Who is the qualified health-care practitioner in charge of the long-term study that proved the medical benefits? (3) When was the device designed and manufactured? It was briefly mentioned that some subtle-energy devices might adversely change the shape of the etheric body or exacerbate one or more miasms in the subtle bodies. Any device that uses plastics, glues or other man-made chemicals has this potential unless the rarefaction of the etheric energy output is inordinately high or something else is done to counteract those coloring energies. There are some computerized devices where this is not a problem because those materials are sufficiently isolated from the user and/or the rarefaction level is sufficient to cancel out any imbalances. When considering the purchase of a device that has a plastic housing or uses glue, ask the seller what specific characteristics are designed to eliminate the potentially disruptive effects of the petrochemicals present and whether the builder feels it important enough not to use those materials in future models. If you do not feel comfortable with the quality of the answer you receive, then walk away. An excellent subtle-energy device might be practically useless if there is insufficient training or instruction. For example, some technologies (like the multiple-wave oscillator) can cause severe dehydration. Others, like some orgone boxes and certain sacred geometries can actually emit unhealthy subtle energies when misused. Analyze the quality of written and verbal instructions, cautions, contraindications and the training that is available with purchase. If you feel that there is insufficient or poor instruction, then consider another technology. Accurate intuitive testing of subtle-energy devices during a conference or expo can be difficult. There are usually a number of subtle-energy technologies and so many people milling about that the quality of accurate intuitive information is reduced. Finding an exhibitor who feels comfortable letting you examine the device away from the other exhibits and people will help you sense more accurately its subtle-energy characteristics. (Some individuals find that washing their hands first in cold water improves the sensitivity of their

impressions.) Another red flag is when the builder or salesperson refers to how well the technology worked when the "original" inventor used it. Naming Tesla, Rife, Reich, Lakhovski and so on is common. Be aware that the device being marketed is undoubtably different from what the above inventors created. The device before you might be technologically better, but the chances are that it is not as effective. You can afford to be critical. Many of the subtle-energy devices you encounter will simply not provide the benefits being promoted, and you can focus on the small number of such technologies that are excellent by comparison. (See below for a list of individuals and companies distributing subtle-energy technologies that meet the basic tests of quality and integrity.) CONSUMER GUIDELINES FOR A SUBTLE-ENERGY DEVICE Define your goal. You first need to define your specific goal when you shop for a subtleenergy device. Is it to improve an aspect of physical health or to increase spiritual consciousness? If it is for physical health, to what extent would a subtle-energy device make a difference? Has research been conducted using that device to treat the problem you have? If it is for spiritual consciousness, will the technology assist the specific kind of growth you are seeking, or is the technology too general in its effects? Know your specific needs and do not compromise them. Research the market. After you define your specific needs, then research the market in subtleenergy products. Do not buy the first device you see. Know what's available and from whom. Contact companies that sell a variety of subtle-energy devices via catalogs such as Tools for Exploration, (800) 456-9887. Go to trade shows and question the speakers and exhibitors at the Whole Life Expos. Call the International Society for the Study of Subtle Energies and Energy-Medicine (303) 278-2228; the International Association for New Science (970) 4823731; the International Tesla Society (7l9) 475-0918; Global Sciences (303) 452-9300; the U.S. Psychotronics Association, 3459 Montrose Avenue, Chicago, IL 60618, or the Advanced Water Sciences Symposium (214} 682-9162. Ask if they know of companies or individuals selling subtle-energy devices for non-medical purposes. Narrow the best to two. By now you might have found a number of subtle-energy devices that appear to meet your needs. Using the information that you have collected, narrow the technologies down to the top two best candidates. If possible, do some additional networking and contact several people familiar with that device and technology and the reputation of its designer and distributor. Identify yourself as a possible purchaser of one of these devices and say that you wish to get further information. You want to know what background technology supports the device(s)

axe where you can get written material about it. Ask whether the inventor/builder has been written about and how to obtain those materials. Ask if there is any written information about the materials used in the device; if not, ask for details they know about. Then ask for testimonials of people who have used these devices, with phone numbers so that you can ask pertinent questions that will help you decide if their experience is relevant to you. Get as much written data as possible, or at least learn how to obtain it. QUESTIONS FOR THE BUILDER OR EXPERT USERS OF A DEVICE Is all of the evidence of the technology's benefits anecdotal, or has there been a long-term research program that monitors users over time? What are the contraindications when using the device? Does it cause dehydration or a healing crisis? Does it adversely affect a pacemaker or lessen the effects of medication? Does it cause drowsiness ? Can it be misused, and what constitutes misuse? Are the instructions available for reading before purchase? Some subtle-energy devices are sold at discounted prices at trade shows or during specials. Ask the manufacturer or distributor if that is the case with the device you are interested in. Also, check pricing among the distributors, their markup can vary. Always ask if the model you are interested in is the latest version, or if it will soon be replaced with an improved version at the same price. Find out if the distributor gives credit for the used model as a tradein when a new version comes out. By now you should have a good sense of which device will best meet your needs, its cost and how to purchase it. Use it carefully and, if possible, keep a journal of your use, describing date and time of use, method of use and perceived effects. In this way, if there is a problem you can communicate your journal information to the manufacturer, who is more likely to assist you or perhaps even give you a refund when warranted.

QUALITY PRODUCT RECOMMENDATIONS Although the field of subtle-energy technology is rife with false advertising and misleading products, there are some excellent devices available. (Neither the writer nor publisher is in any way affiliated with any of the following individuals, companies or product lines.) These devices/technologies were chosen because of (1) the high quality and balance of the subtleenergy output, (2) the reputation of the people who designed and distribute the devices and (3) the presence of another multidimensional Hilbert space even more rarefied than that of the etheric subtle-energy matrix. Of course, 1 recommend these technologies for experimental purposes only. I can neither suggest nor imply any use related to physical health, and I recommend the guidance of a qualified reputable holistic health-care practitioner. Recommendation No. 1: Unidirectional and omnidirectional inert-gas devices. One or more of the five inert gases are compressed inside naval bronze containers and magnetically stimulated. The argon omnidirectional inert-gas device makes an excellent general-use device because it substantially lowers the surrounding etheric density. The xenon omnidirectional inert-gas device also seems to have some amazing effects upon consciousness. Unidirectional inert-gas devices are generally used during sleeping for overnight attunement. Quantum Biology Research Laboratory has tested an earlier inert-gas device and it tested somewhat above average. There is stronger than usual anecdotal support of the devices among users, and prices are quite reasonable, given the cost of construction. Technical information about inert-gas devices is found in the book Einstein Doesn't Work Here Anymore by Maurice B. Cooke (Marcus Books, Toronto, Canada, 1983), which discusses some of the research in inert-gas technology. In addition, Jon Fox's Hilarion Internet home page at http://hilarion.com also discusses inert-gas technologies. For non-medical, amusement purposes only, inert-gas technologies can be purchased from Jon Fox at P.O. Box 2209, Nevada City, CA 95959. His Email address is fox@hilarion.com. Recommendation No. 2: The company Metaforms produces sacred-geometry tools as well as a harmonic circuit. The sacred-geometry tools are beautifully crafted consciousness-raising mixtures of art and science, Favorites include the 3-D Star and the Rare-Gas Resonator. Although all Metaforms devices emit a more balanced subtle energy than most, the Rare-Gas Resonator is one of this technology's most rarefied manifestations of energy readily available. I was also impressed by Metaforms' harmonic circuit, a device that reduces stress and incoherence in the electrical wiring and EM fields throughout the house. Some feel that it is easily one of the best of these devices available. Metaforms produces spiritual technologies aimed at instilling a sense of higher consciousness that has balancing and healing effects. Many Metaforms can be hung from the ceiling, allowing meditation and spiritual work beneath them For more information contact Metaforms, P.O. Box 2262, Boulder, CO 80306; (303) 449-5918.

Recommendation No. 3: Biomagnetic Research, Inc. makes various subtle-energy products. The focus of many of them is to reduce the adverse effects associated with the EM fields of computers and other electrical appliances. Their literature, titled "Tests on Crystal Catalyst Electronic Smog Busters," discusses the product testing to date. Although less expensive than many subtle-energy devices, their output is more balanced and, in some cases, more effective than their more expensive counterparts. For more information contact Biomagnetic Research, Inc., Rt. 1, Box 35-D, Globe, AZ 85501; (520) 425-5051. Recommendation No. 4: The Harmonic Wave Table created by Rita Ward of Natama Institute in Sedona, AZ. The Harmonic Wave Table was developed to assist in healing sessions by promoting relaxation and supplying the essences of many elements needed by the human body to achieve and maintain balance. The table works with the client's EM field, gently moving the energies of their physical and subtle bodies. As a physical body relaxes, energy is able to move at a deeper level within the physical body, allowing deep core issues to be addressed in a safe and contained energy environment. By placing specific elements within reach of the physical body while in a state of open relaxation, the body's innate intelligence retrieves what it needs from its environment. Each table is created site-specific. A table designed for Colorado will have needs different from one used in Arizona. Healing takes place in all subtle bodies but predominantly in the etheric, mental and higher spiritual bodies of the person using the table. Healers will find this custom-designed technology especially useful for their clients. For additional information contact Poseidon Connection, P.O. Box 3095, Winter Park CO 804822 (970)726-8004. Recommendation No. 5: The Bioenergetic Transducer-Aided Resonance (BETAR) invented by Peter Kelly of Dimensional Science utilizes phase-conjugate sound in a special application of time-reversed EM propagation. Research to date suggests that the full BETAR system is currently one of the six best healing technologies available anywhere. The BETAR consists of a geodesic dome surrounding a bed. Transducers are placed along one's spine to coincide with the energy systems of the body. Healing music is emitted through a sophisticated sound system, deeply aligning and attuning all of the subtle bodies. What happens is that the BETAR runs a continuous, fast Fourier transform on the pulse of energy detected from the human structure via the transducers. The changes that your body produces as a result of listening, hearing and feeling the music are looped back to the computer, which then adjusts the transducers. The information returning to the person is 180 degrees out of phase. Neurosurgeon Norman Shealy, M.D., developer of the TENS machine, has done extensive research on the neurochemical effects of the BETAR. Dr. Shealy's research has documented changes in brain chemistry associated with pain control in BETAR sessions. Shealy, among other researchers, continues to research the many beneficial effects of the BETAR. Dimensional Science, like the other groups listed, makes a conscious attempt to heal at levels of refinement above that of simple etheric energy. The BETAR is a spiritual technology that attunes a person at the highest spiritual levels. Trained operators assist each client during their

session. For additional information about the BETAR as well as the many other fields of research that Dimensional Sciences is engaged in, contact Peter Kelly, Dimensional Sciences, Inc., P.O. Box 167, Oasis Road, Lakemont, GA 30552; (706) 782-6301. Recommendation No. 6: The Sound Spectrum Analysis computer system from Sound Energy Research. The Sound Spectrum Analysis system takes a voiceprint from an individual, separates and analyzes the tonal fragments of the voice and converts the tonal fragments into visible graphs of the mineral content or state of balance of the physical, emotional, mental and spiritual bodies of the person. The technology then produces a series of tones or vibrations matching the minerals that are out of balance and resonates them back to the person through a technology called the MiraCoil. The 109 elemental tones mere discovered by placing each element in a tumbler of saline solution and passing a laser beam through the solution, then analyzing the spectra. The wavelengths were then converted into matching sound frequencies of a lower octave. The MiraCoil is a very advanced, customizable subtle-energy device consisting of electrical coil windings based on the shapes of the platonic solids. The shaped coils surround clear quartz-crystal tubes, which can then hold higher-vibrational materials such as flower essences, pure gold and so on. The system works at its highest level of consciousness when available inert-gas containers are placed in the quartz tubes. For additional information contact Robert Lloy, Sound Energy Research, 2101 Bermuda Dr., Oxnard, CA 93030; (805) 278-0233 or via Email at rlloy@aol.com. [Manufacturers of other subtle-energy devices are invited to contact the author so that he might learn about their technologies.] READING LIST The following is an exceptionally short sampling of some of the many excellent books and publications available for laypersons to improve their understanding of subtle energies. 1. Babbitt, Edwin S., The Principles of Light and Color. The Citadel Press, Secaucus, NJ, 1967. 2. Besant, Annie and Charles W. Leadbeater, Occult Chemistry. Health Research, Mokelume Hill, CA, republished in 1967. 3. Burr, Harold Saxon, Blueprint for Immortality. The C.W. Daniel Company Limited, Essex, England, 1972.

4. Cooke, Maurice B, Einstein Doesn't Work Here Anymore. Marcus Books, Toronto, Canada, 1983. 5. Davidson, John, The Secret of the Creative Vacuum. The C.W. Daniel Company Limited, Essex, England, 1989. 6. DeMeo, James, The Orgone Accumulator Handbook. Natural Energy Works, El Cerrito, CA, 1989. 7. Dewey, Barbara, Consciousness and Quantum Behavior. Bartholomew Books, Inverness, CA, 1993. 8. King, Moray B., Tapping the Zero Point Energy. Paraclete Publishing, Provo, UT, 1989. 9. Lakhovsky, Georges, The Secret of Life. Health Research, Mokelume Hill, CA, reprinted in 1970. 10. Leadbeater, C.W., The Chakras. The Theosophical Publishing House, Wheaton, IL, 1927. 11. Milani, Myrna M., and Brian R. Smith, A Primer of Rotational Physics. Fainshaw Press, Westmore-land, NH, 1984. 12. Milani, Myrna M., and Brian R. Smith, The Principles of Energy. Fainshaw Press, Westmore-land, NH, 1985. 13. Oldfield, Harry and Roger Coghill, The Dark Side of the Brain. Element Books Limited, Dorset, England, 1988. l4. Phillips, Stephen M., Extra-Sensory Perception of Quarks. The Theosophical Publishing House, Wheaton, IL, 1980. 15.Russell, Walter, A New Concept of the Universe. The University of Science and Philosophy, Waynesboro, VA, 1989. 16.Von Reichenbach, Baron Carl, Reichenbach's Letters on Od and Magnetism. Health Research, Mokelume Hill, CA, from 1852 original.

17. Whittaker, Sir Edmund, A History of the Theories of Aether and Electricity. Dover Publications, Inc., NY, 1989. Copyright 1997 Michael Thau

THE INERT GASES


ABSTRACT: By exposing compressed inert gases to magnetic and electric stimulation, biological effects have been observed. Some background and review of the subject is presented, and case histories described briefly. Also, be sure to see the Inert Gas Devices F.A.Q. It has been a dream of mine to share publicly the research I've been doing for the last eleven years. This material will cover a wide range of different topics. I'm going to touch on a little bit of the conventional science about inert gases and what we have known about them for many years. And then discuss how I came to work with these things and the interesting effects they produce. I'll get into some unconventional science about the aether, and the relationship between inert gases, the aether and the aetheric body. I'll get into the engineering part: the physical construction of the devices and how I've been using them. Also, some interesting case studies and information on how inert gases have been working with people over the years. Then I'll close with brief responses to a few questions that have been asked. Part of the experience of the devices is a personal one, a way in which you can actually feel them yourself. Whenever possible, I like to provide people with the experience of holding and playing with the inert gas devices. It's a way to know them that's just as good, or better, than hearing or reading about them.

IMPORTANT DISCLAIMER:
I am an engineer, not a medical doctor (MD), so I can't make claims for the devices. I can talk about the experiences that other people have had with them, and I'll be doing that here. But I would emphasize that I am not making any medical or therapeutic claims.

CONVENTIONAL SCIENCE
There are five inert gases. They are, in order of atomic size: Helium, Neon, Argon, Krypton and Xenon. When Krypton is mentioned, many people are reminded of Superman. Jerry Segal and Joe Schuster, who began writing the Superman comics in 1937, simply took the name "Krypton" from the Periodic Table. The following chart will outline some statistics regarding these inert gases:
Name Symbol Approx US$/ltr. Atomic Number Boiling Point(C) Max. Avail. Pressure (PSI) Amt. in the

Atmosphere

Helium 10

He

-268.9

6,000

5.2 PPM

Neon 1.00

Ne

10

-246.07

6,000

18.2 PPM

Argon 10

Ar

18

-185.88

6,000

7600 PPM

Krypton 3.00

Kr

36

-156.6

1,350

1.1 PPM

Xenon $11.00

Xe

54

-108.06

800

0.036 PPM

PPM is parts per million. Approx US$ is approximate cost per liter in US dollars in 1995. In nature, inert gases are found primarily in the atmosphere. We are breathing them right now. The most prevalent of them is the inert gas Argon. Argon's high amount in the air runs to about .76%, or 7600 parts per million. The most rare of the inert gases is Xenon. It is found at an incredibly low level - less than 1 part per ten million in the atmosphere. Inert gases are extracted by cooling air to a very cold temperature. The air liquefies, and then its temperature is slowly raised. Since each of the inert gases has its own unique boiling point, each one can be pulled off and purified. The gases are called inert because they do not combine naturally in nature. That is, you won't find compounds in nature containing the inert gases. Under laboratory conditions of extremely high pressure and high temperature there are many compounds that have been made, particularly with very active substances, such as Xenon Fluoride and Xenon Chloride, which are fairly easy to make. But they don't occur naturally. The costs of inert gases are directly related to how difficult it is to extract them from the air. Xenon is quite expensive. The small quantity that might be used (a few liters in one of my devices) can get fairly expensive. When filling a large device, it can cost many hundreds of dollars just for the gas itself. Inevitably, in building the devices a little gas is wasted, too. It is interesting to me to note that the other planets in our solar system that have atmospheres have much higher levels of inert gases than we have here on Earth - more on that later.

INTUITION
I got interested in all of this by reading of the research done by others, especially Maurice Cooke's, in Canada, which became the book "Einstein Doesn't Work Here Anymore." It covers more about the theory behind inert gas technology - I strongly recommend it. It also covers some aspects one might call intuitive. As I began to investigate the inert gases, I found that I needed to get more intuitive information, so I went to visit a psychic. Her response was that she could not channel the technical information that I wanted - and that I could! Then she asked me if I would like to learn how to do that. That was in 1983. Up to that point, I had built some of the devices and I'd played around with them. And I had lots and lots of questions, but I had never "channeled" per se.

She showed me what to do. I was to get very relaxed, say a prayer of protection and go into a deep trance state to access this energy, which calls itself Hilarion. There are many historical references to Hilarion, as perhaps an earlier incarnation of Plato -- perhaps, Saint John the Apostle. And that's interesting! But my particular contact appears to be from an Atlantean incarnation, when I was aware of things scientific and worked with Hilarion in ways of learning about the science of the time. That's what has come to me intuitively. There's no way, of course, to check that out. Except that I do hold the idea that, "by your fruits you shall know them." For me, the way in which this has borne itself out as valid and useful is when I use the inert gas devices, or as I use some of the channeled information. I have found that it helps other people, helps myself and is valuable in itself. I think channeling is a very interesting way to access information directly. It is something that I think all of us can do. People with scientific ways of seeing are frequently channeling when they get an idea in the middle of the night, or in the shower when they're suddenly inspired. That's certainly one form of it. I think that, as we become more able to access higher and higher levels of information, more and more ways of working with intuition appropriately will show up.

UNCONVENTIONAL SCIENCE
The idea that has been presented is that we are living and working at a level that transcends much more than just the physical body. We're working with the aetheric body, as well, when we're doing any kind of healing or change work. Healing takes place primarily initially in the aetheric body and this is then transmitted to the physical body. Perhaps you've seen drawings that show the physical body surrounded by the subtle bodies, like the emotional body, the mental body, causal body, and so on. All of those are also very important in the healing process, too. When using the devices we visualize creating a new information blueprint in the mental body, that then is transferred to the aetheric body, and then to the physical body. Another way of looking at this is that, surrounding the body at all times is a fluid substance called Aetheric Fluidium. In that substance we have the capacity to impress holographic information that then is brought into the physical. The way in which this occurs, however, is not obviously 3 dimensional. Otherwise, you would have the Aetheric Fluidium dripping off your body all the time. Instead, this is taking place at what I'm considering the 4th dimensional level. There are many different ways to get at the 4th dimension. We all know that we are working in the 4th dimension by accessing information intuitively or telepathically. Some experiments that have been done show telepathy over very long distances has been correlated to occur faster than the speed of light, as if occurring at some other dimensional level. I also see that another way to access and get a handle on how to visualize and understand the 4th-dimension is to take the process the opposite way. And in this I would help you recall, perhaps, something you learned in school about what is called Flatland. Imagine a world that exists only in 2 dimensions, so that beings interacting there have no concept of the 3rd dimension that we have. They have only, say, length and height, they do not have depth. And in such a situation, when two beings might meet, they have only the option of going around each other. They could never go over each other. And, of course, to them the world would seem to be infinite in size. Recognizing this from the 3rd dimension, imagine this very large flat plane was a sphere, connected into itself. Imagine that, if this sphere was large enough, the beings of Flatland would never be aware of its curvature. Now apply this to our own, 3-dimensional space, imagining it somehow curved in the 4th dimension. This is a one way of qualitatively understanding our curved space in the 3rd and 4th dimensions. This helps us understand quantitatively from Einstein's equations how space

and time are essentially curved. Now imagine that vibrations could be set up in Flatland by imparting energy from some outside source. In other words, somebody interacting with the flat world pulls on the space that it exists in. By pulling and pushing one could impart a longitudinal vibration, and by sideways movement a transverse vibration. Now what happens if you begin to move the Flatland plane up and down? Now to our way of thinking we can see that as a 3rd dimensional movement. But the Flatlanders would only be aware of a shadow. There would be an energy that would appear in their reality that Flatlanders would experience as things moving around, or energy that could be experienced in different yet unfamiliar ways. Similarly, we have the existence of what are postulated as Primary Points. These are points of internodal vibrations that are occurring at the 4th dimension, manifesting themselves at the 3rd dimension. And it is the contention of the information that I'm bringing through that these points are present in the nucleus of the atom of the inert gases. These primary points are widely distributed all over the galaxy and here on earth. What are emitted from them are all kinds of interesting effects and energies. However, the creation of matter in the nucleus itself tends to mask those effects, so we don't see very much of that energy in its raw form. This brings us to one of the interesting facts about all of the inert gases. And that is that they are gaseous. For Helium and Neon, that is not so unusual. But certainly for Xenon it is quite unusual, because its atomic size is so large. It's quite a bit larger than Gold, which is quite solid. Yet, conventional science would have us believe that Xenon would should also be solid. And yet, it is gaseous, as is Krypton, also quite large in atomic size. We think now that this is because of a constant, low level emission of some kind of aetheric energy (for lack of a better term). One way to view this is that the nucleus of the inert gas atoms are a doorway to another dimension. Now that gets a little bit more into "Twilight Zone" than I particularly like. But this does bring up the possibility of tapping into that energy. One way to increase this release of inert gas energy, is to subject the inert gases to high pressure. Under high pressure there tends to be some dislodging of that nucleus and of the atomic structures which allows some of that energy to be released. This will naturally take place in all directions at once. So, if we impose various conditions on this high pressure excited gas, then we can get all kinds of interesting effects in a line, or various other shapes. Before going further, I would like to note that there is another part to this. It has to do with our past history and our connection to the other planets. It has been observed that there are larger quantities of inert gases around other planets that have atmospheres than here on earth. It is the contention of the channeled wisdom that we once had 3% Xenon in our atmosphere and it was removed for us to learn particular lessons. Xenon, the most interesting of the inert gases, is supposed to have the property of being able to produce regeneration in the body. By subjecting Xenon to high pressure, magnetic fields, electric fields, and so on, some of its energy is released. This energy is identical in nature to the raw material of which our aetheric body is made. Since our body's DNA has the pattern, we should be able regrow missing body parts and regenerate the physical body. But we do not have the aetheric energy. We don't have enough Aetheric Fluidium, or raw material or substance that's necessary, because we're putting it into

many other things. We're using it to heal stress. We're using it for fighting off viruses, infections, dealing with environmental pollution, and many other things. So, the idea of creating regeneration in the body is just to bring more aetheric energy, from stimulated Xenon, into the physical body.

PRE-HISTORY
From channeled wisdom about Lemuria, which might correspond in biblical times to the Garden of Eden, we had 3% Xenon in our atmosphere. Xenon interacting with Earth's gravitational field and electric field high up in the atmosphere and, of course, Earth's subtle magnetic field nearer the ground, enabled a low level Xenon energy to be released all the time on the planet. We did not have death. We also did not, however, have reincarnation. By removing most of Earth's Xenon we were able to achieve that. I use the word achieve quite correctly, because I now think that death is quite unusual in the galaxy. It has allowed us to really get in touch with love. And that is its purpose. That is to say, by dealing with emotional difficulty and suffering, as well as disease and more importantly, reincarnation, we're able to take the most important lessons about love from one lifetime to the next, in this way perfecting love in ourselves. Without death, humanity's soul was much more of one unit. By removing most of our Xenon, we began to die, and our single soul began to separate into individual souls. At the appropriate time, I imagine, our individual souls will rejoin or come together, a time that seems to be approaching. It is as if we were a research group, studying love. Then in rejoining, we would share these approaches and different lessons with each other. We would find out the very best and fastest ways to love, and know love at the most powerful levels possible. Certainly, there is a risk in such an experiment. And we've seen that, too! There's always the potential that we could "lose it" here. But I think that at the spiritual side, it's important to recognize that we are given the tools to recognize what is. Therefore, it's useful to look from that point of view about Xenon. Another property of Xenon is its ability to protect us from solar radiation. This has not been channeled through me. In the book by Solar Cross called "Star Wards" it is suggested that Xenon has the capacity to protect us from solar radiation, which is essentially damaging, and is the cause of death. That's also an interesting adjunct to my other work with Xenon, and has led to some other applications, including "Sun Elixir" available through Pegasus Products. This is water, exposed to sunlight that has been filtered through the "beam" emitted by a Unidirectional inert gas device containing Xenon. So we see science and spiritual teaching crossing over their usual boundaries. I've not always been comfortable with that. But gradually, a larger context emerges.

CONSTRUCTION OF THE DEVICES


As an engineer, I was faced with some technological requirements. I needed to stimulate these inert gases at high pressures with magnetic fields. The magnetic fields would have to interact with the gas. Containers needed to be made of a material that was non-magnetic. I have chosen naval bronze as it has no lead in it, as most brasses do. We've found that lead tends to block the energy that's emitted from the inert gases. In all the experiments that I've done, since we don't have an empirical way of measuring, what we'll do is put our hands by the devices and see what we feel. We're also experimenting with ways in which inert gases influence plant growth and biological growth in various organisms. There's a lot of variability, because it seems as if the aetheric energy needs to have impressed upon it a visualization or some picture or blueprint as to how it is going to be directed.

One of the best ways to perceive the "inert gas effect" is just by putting your hands near either side of the device. Typical experiences people report are temperature change - hot or cold. Many people will feel a tingling sensation. There are a few people who report a sound inside their head, or they can see a light coming out of the device. Generally, approximately 30% of the people I'll expose these devices to will feel nothing. The explanation for all of this is that, as we're stimulating the aetheric body, the way in which any individual perceives and relates to the energy that comes to their aetheric body is different. Some people will receive it more on one side of the body than the other. Some will perceive it as these different stimulations to their physical senses. I'll typically use high pressures in the devices at many times atmospheric pressure. Atmospheric pressure is about 14.7 P.S.I. (pounds per square inch). Most of the devices are pressurized at about 300 PSI and go up from there. It is possible to obtain the inert gases at pressures as high as 6000 PSI. But then I run into the problem of being able to find adequate valves to contain them, because those are extremely high pressures. It does seem, however, as if there is a stronger effect at higher pressures. This also is true with the stimulation techniques, of which there are many. Permanent magnets are easiest to work with is. You don't have to plug them in, they don't get any weaker with time, and you can just keep on reusing them. They are very convenient, because you can simply remove them from each side of the device in order to "turn it off." In my Unidirectional Device, we've observed that the inert gas effect is emitted parallel to the lines of magnetic flux. When there is a magnet inserted into each end of the device an inert gas energy will be emitted out each end. The inside of the device is a hollow chamber connected to a valve near one end. I can introduce inert gases in various combinations, different pressures and so on, and observe effects by putting a magnet on each side held in with a small thumb-screw. The apparent release or energy occurs in a cone, subtending a 20 degree angle. If you are very close to the device, then you generally would experience it only within a narrow radius of the ends. And as you get further and further away that area of sensation widens, while the intensity diminishes. I've also constructed a completely different type of device: the "Omnidirectional" (see picture on the left). It uses a different kind of magnet that is commonly found in machine work to mount various objects to a lathe or a mill, called a potted magnet (see picture on the right). This type of magnet is cylindrical in shape. On its open end it has 3 annular rings. At the center is the actual magnet. Surrounding this magnet is a non-magnetic ring of metal. And then on the far outside, going all the way around to the bottom, is a shape like a pot - the kind you might use on your stove - a saucepan. This is made of mild steel. The North pole is on the top, and the south pole is at the bottom, in contact with the inside bottom floor of the "pot." Magnetic flux is conducted through the bottom, up to the outer edge and jumps across back to the north pole. This produces essentially a toroidal shaped field like a donut. This type of potted magnet is similar in principle topologically to a horseshoe magnet, rotated on its axis. The Omnidirectional Device is a hollow chamber with a potted magnet standing upright inside it. I introduce inert gas into this volume and it is in contact with the top of the magnet. This design has evolved over a number of years. Initially, I had the magnet outside with its field penetrating through the outside wall. But because the field is so strong very close to the surface, and weaker farther away, I was losing about half of the field in the wall.

In this new design, the magnet is actually inside. This makes the construction a lot harder. When magnets get very hot, they lose their magnetism - the Curie Effect. Typical high brazing temperatures can destroy the magnet. With the Omni, a field results that is circular and extends all around the area. The result, with Argon and Krypton, tends to be meditative in quality. They tend to clear the energy in a room, because of the production of more aetheric substance. This tends to have the effect of what might be termed aether clearing. Improved ability of individuals to communicate with each other telepathically, to work at more psychic levels is usually noticed. But most importantly, we found this very helpful for use with the destruction of negative thought forms. One concept of negative thought forms is that they are ideas or programming, like a tape that runs over and over in us, which form in the aetheric body. As it is held there it tends to be problematic for us. We may do psychological work or other clearing, but we still have those aetheric constructs that we have to deal with. By the use of, particularly, the inert gases Krypton and especially Argon, we're finding we can rapidly clear those negative thought forms in people. Now if somebody is not doing psychological work to help get at the reason they put the thought form there in the first place, the device will simply be a stop-gap measure, a band-aid. The person will usually reconstruct the negative thought form within a short period after using the device - it could be as little as an hour, but typically, it is three days. We've noticed that with Argon the various thought forms from this lifetime are the ones that are generally affected. For thought forms from past lifetimes, Krypton seems to be indicated. It is very easy to determine if Krypton is indicated. If particular physical complaints or difficulties they're having have a very unusual quality, such as if they say "I have this pain only at night and only in my left shoulder right here." To me, the image comes up that they got shot with an arrow in a past life at night or perhaps some similar past-life vision. But whatever the particular ideology, it seems as if Krypton seems to be very helpful in various patterns that don't necessarily relate to things that people are aware of from this lifetime, nor that they have consciousness about. In order to make the Unidirectional devices, I turn the bronze on a lathe, silver braze, and pressure test them, because we certainly don't want to let any Xenon leak out - it is so expensive. It is fairly intense and rigorous work. However, there is an alternate method of using the devices that is lower in cost. With assistance and advice from several homeopaths, I've developed a way to produce "elixirs" homeopathically from the inert gases. We point one of the Unidirectional devices into some pure water for about a half hour. Then we dilute that water to a 3X potency, with succussion, by traditional homeopathic technique. That means you take one drop, mix it with 9 drops of water. Succuss it (hit it on the palm of your hand) 50 times, then repeat. Repeat that entire process a total of three times to arrive at a 3X potency. We found that at that dilution many of the properties that are observable with the devices appear to be directly reproduced into the vibration of the water. The way homeopathy seems to work is that the potentiation by succussing the liquid seems to help bring into form the intent of the energy placed in it in the first place. I've found particular assistance with a number of cases with the inert gases Neon and Krypton. We've not had that much success with Xenon, apparently because the Xenon energy is much more than just vibrational in character. It's the actual raw material of which we are recreating missing body parts. It's difficult to actually bring that into water. Inert gas fields can be both magnetically and electrically stimulated. One way to do both is by wrapping a coil all around the device, thus producing a magnetic field inside it. Down the center is a wire to produce the electric field. What will be noticed with electric stimulation is that the inert gas energy appears to be emitted perpendicular to the lines of electric field. Since the electric field radiates cylindrically from the central wire to the inner wall of the device, the inert gas energy is emitted perpendicularly, out the long ends of the device. Thus

the magnetic and electric field stimulations combine. This tends to bring the energy, as near as we can determine, into a very tightly focused beam that is the same diameter as the inner diameter of the chamber. This would appear to be more laser-like in character. We have used this for the destruction of negative thought forms in the subtle body itself, passing the energy right through the subtle body of the person, but not through their physical body. Another device I want to mention is commonly available these days: light bulbs that contain Krypton. That's the ultimate "poor person's inert gas device." You've probably heard about these in flashlights. They are little tiny bulbs. However, bulbs containing Krypton are commonly used in traffic lights, because the Krypton increases the lifetime of the light bulb. What I've done here is simply taken one of these light bulbs and put a magnet next to it to help stimulate and focus the energy. Then I wrap the entire arrangement with copper foil. We call this a Krypton Concentrator. We initially started using this for stimulation of the Third Eye, because Krypton seems to associate itself quite a bit with psychic abilities and the ability to perceive other dimensions - auric vision, in particular. This has been a lot of fun to play with. A whole program for third eye development has been channeled by Maurice Cooke in Canada in the book, "Other Kingdoms." We've found other uses for Krypton. A number of people with joint pain and interesting physical body complaints have told me that touching the probe to various parts of their body where there was some difficulty improved their condition dramatically. I also know people who use these for clearing crystals, where you actually touch the probe of the Krypton Concentrator to a quartz crystal and clear out any previously stored programs or energies within it. It is important when using this device that you do not actually touch any of the Krypton Concentrator's metallic surfaces with your hand. This will "ground out" the inert gas energy, and keep it from being emitted out the probe tip. This brings me to the next thing that we've discovered. The inert gas energy is apparently mono-polar at the 3rd dimensional level. It seems to be emitted from the device and extend out. If it does eventually come back, completing the circuit, it appears to do so through the 4th dimension. We found with this device that the inert gas energy is conductible by wires. The copper foil captures the energy. The probe is insulated, so you don't touch it with your hand, thus allowing the inert gas field to move through the wire. It is available at the probe tip, which at that point can be touched to the body.

CASE HISTORIES AND APPLICATIONS: HELIUM


We found that if we take one of the Unidirectional Devices and point it into a glass of water, somebody drinking the water will experience very interesting effects. When you seem to be in a normal state, I've observed a lift - like more energy. For people with migraine headaches, or unusual headache symptoms, water charged by Helium in this way will often rapidly clear the headache. The explanation for this is that energy may be trapped in the lower part of the body and cannot be released out the top of the head out the Crown Chakra. The Helium in the water seems to be able to move through the blood and open that up that Chakra. We've had interesting results with that in a number of cases of previously incurable migraines. Another use for the Helium energy is in using the device itself. When pointed directly at the person, many with insomnia have found they can get much more deep and refreshing sleep with the device. However, we've also had to moderate it. If the magnetic field is too strong, or the device is too close to them, they will actually have difficulty waking up or they'll wake up feeling groggy. The idea is to find the right blend. Generally, that is going to be a fairly low

magnetic stimulation on the order of 200 or 300 gauss, and a distance away from the person of about 4 to 8 feet. Deeper, more refreshing sleep can be very helpful in a number of conditions. As the body repairs itself in sleep, Helium in the sleep state appears to accelerate the repair of trauma to the body, like sprains, dislocations, bruises, etc.

NEON
This seems to be extremely helpful for quite a number of people that I've worked with for digestion and energies that have to do with the Root Chakra. Many things that Neon seems to work with is the bringing up of energy, particularly from the Earth or in the lower part of the subtle bodies, into the Base Chakra. This can affect digestion and anything to do with the lower portion of the body. In fact, quite a few people who suggest natural remedies and vibrational remedies have been using Neon. It is probably the most popular of the rare gas essences that Pegasus Products produces. [You can contact Pegasus Products at (800) 5276104, or at (970) 667-3019.] Also, Neon seems to reverse the feeling of being "spaced-out," because of its connection to grounding energy. We've also had several interesting effects with people suffering from various viral complaints, including cytomegalo virus (CMV), and chronic fatigue syndrome (CFIDS). In the past, some of these had other names (like mononucleosis). These are still with us. The names have just changed. With the inert gas Neon there is some beneficial effect by increasing energy to the Root Chakra, which seems to improve the immune system, helping to destroy some of these invading organisms. Also, the reproductive system seems to be helped. We have a few cases of individuals having difficulty with conception using Neon in combination with Xenon for improving the function of various parts of the regenerative system of the body. We've had quite a number of cases here that have been very interesting. This affects both potency for men, and for women the ability to get pregnant. We also have several instances of people who have used these devices for cancer. One of the very first I ever worked with was a woman with cervical cancer. She used a device containing Neon with a little bit of Helium, so that her sleep would go very well. After four months she had a biopsy and they said no more cancer. It was quite nice for her, and great for me to get that kind of physical verification of my work.

ARGON
I've already discussed its use in negative thought form destruction, for which it seems to be quite powerful. You might be quite surprised to see how many people benefit from that. It seems to also assist with energy in the solar plexus and energy having to do with our own understanding of self-empowerment. Some people also report improved sleep. This isn't so much for insomniacs, but people who may perhaps be journeying out-of-the-body so much that they need to be right in their body while they're nourishing themselves in sleep.

KRYPTON
Besides having the negative thought form destruction characteristics I've already observed, Krypton seems to improve psychic abilities. People who use it regularly will generally notice things happening in the Third Eye. Krypton Elixir is especially interesting. Channeled guidance indicated that it might be helpful for epilepsy. I had a chance to try that with several cases. In one case, a female epileptic dropped her level of Dilantin in half. In another case, after the use of one entire bottle of Krypton Elixir, a man was able to go off Dilantin completely, and has had no drugs or seizures since. It has now been two years! That's after just one bottle of Krypton Elixir. That was quite remarkable and unusual, but it shows us some of the potentials available with the inert gases. Krypton seems to improve brain function. It balances what is happening at a psychic level with the conscious level. Since epilepsy appears to be an out-of-phase condition between the different lobes of the brain, Krypton's ability to enhance brain function would certainly seem to help.

XENON
Xenon is most useful for regeneration. Of course this is very controversial. We don't have the ability in traditional science to produce regeneration in human beings very easily. We usually mix Xenon with various other gases to focus on particular parts of the body. We have a Xenon-based combination for regrowing teeth. I have worked with several people who have regrown missing teeth. The combination includes Neon and Helium with the Xenon. Next, we have some cases of people who have regenerated hips and improved their backs. Here we generally use Krypton mixed with the Xenon, as it seems to help bone and skin. But for blood engorged organs, for parts of the body where blood is used, then we usually mix Argon with the Xenon. For the regenerative system, we use Neon mixed with Xenon. Lastly, one I've experimented a lot with is a combination of Xenon with small amounts of Argon and Krypton. This seems to be very helpful for lungs. When I expose myself to it, I experience something very similar to how I feel around a negative ion machine: I have deeper breathing, and a feeling of lightness and increased energy.

GENERAL APPLICATION
The inert gas energy is best emitted in line with magnetic fields. It's usually suggested that the person sleep aligned with the earth's north/ south magnetic field. The device is placed in the north end of the room and points directly at the person's head as they are sleeping. When the moon is in the same astrological sign as the bodily system governed by that sign, we find it generally not useful to use the device. For instance, Scorpio governs the regenerative organs. So, you would not use the device when working with the regenerative organs when the moon is in Scorpio. Working with the inert gases certainly has a lot of potential. Of course, I've touched only briefly on the higher power uses of this, which can get us far afield from medical, therapeutic and other applications and into all kinds of very interesting capacities, some of which I am working with currently. In the meantime I invite others to become aware of and work with the inert gases, as they may see appropriate.

Questions:
Regarding the characteristics of the inert gas energy, what other kinds of energy might be present besides magnetic or electro-magnetic? When looking at the theoretical side of this, it's really controversial! Because who knows what magnetism is? It's the contention of the subtle energy that I work with that magnetic energy is a wind in the aether. And the movement of aetheric, therefore, shows up as what is revealed as magnetic energy. This is actually a more fundamental component of energy than either electric or magnetic, and, in fact, is the basis or building-block of all matter in the universe, having come from these 4th dimensional Primary Points becoming 3rd dimensional and then manifesting, as the matter that we work with. How do I mix the gases? There's almost nothing known about the eutectics of mixed gases and I couldn't find a mixing manifold for gases. Right! No mixing manifold is necessary! It's just a matter of partial pressures. Physically, to mix them is very simple. You just put the pressure gauge on the chamber and bring it up to the partial pressures that are needed for the various mixtures - very simple! There's always the problem that the denser inert gases, like Krypton and Xenon, will liquify at too high a pressure. So, that has to be taken into account.

Have you experimented with mixing any of the noble gases with inert non-noble gases, like Nitrogen? Yes! There have been some very interesting experiments done with Oxygen. Apparently, Oxygen has very interesting vibrational characteristics and has a lot to do with life. So, there seems to be some interesting relationships between the vibrational characteristics of Oxygen and its ability to work with the inert gases. It's something that I'm only just beginning to pursue at this point. With all the other gases, certainly there may be other application out there. In my own experiments, I've not been able to discover any particular usefulness in mixing with Nitrogen or other gases. Have you ever used pulsed fields, either DC or AC with frequencies, and what has been the result? It seems as if pulsed fields can be very useful, particularly the device used for the destruction of negative thought forms. Pulsed fields on the order of 30 to 60 cycles, low frequencies, are very useful. However, where it certainly gets interesting is if you get up into the high frequencies. But the problem with that is the physical construction of the device in order to get adequate penetration. If a metal chamber is used, skin effects and eddy currents can prevent much of the magnetic field from entering into the inert gas inside. When working with inert gases how important is consciousness and your intention? If you visualize where the changes are going to go, that is usually how they show up. And that is usually how the device is used. While you're sleeping, you hold the visualization of where the energy is going to go. However, we do have experience with people in comas, or working with animals and plants, where the intent of the operator - the intent of the person near them is also available and quite useful. Click here for the Inert Gas Devices F.A.Q. Link back to the Hilarion Page http://hilarion.com Reach us at: [ Home | Hilarion Gallery | Sounds | Catalog | Gases FAQ | A Channeling | Uplifting Art | Machu Picchu | Jon | Readings | Other Sites ]

You might also like