Professional Documents
Culture Documents
com
Advanced Fuel Additive Technology with Combustion Chamber
Catalyst
Let's face it; the fuels (gasoline and diesel) that we put into our vehicles are dirty.
This means particles are left behind, which together form hard carbon deposits
that harbor poisonous gases such as Carbon Monoxide. When we operate our
vehicles many of these gases are emitted into the air, thus causing air pollution.
Here is the way it works: When EcoTek-1 is added to the fuel tank, the fuel
carries our unique product to the combustion chamber. Its combustion chamber
catalyst agents are used to treat the metal surfaces by forming a Film that is
technically called thermally derived oxidation. The carboxylic metal creates an
oxide residue on the hot surfaces at the time of combustion. This process can be
compared to the scorching of a pan when cooking. When overheated, the food
residue forms a layer on the pan when it is oxidized; leaving a film even after
being scrubbed that discolors the pan and appears to permeate the pores of the
metal.
Inside an engine cylinder, small amounts of material provided by EcoTek-1
oxidize in high temperatures, rapidly producing a thin layer of film on the cylinder
walls, the piston face, and the fire deck, this thin Film layer (thermally derived
oxidation) then provides several benefits.
First; of all, EcoTek-1 enhances the surface heat absorption characteristics of
the metal. The fuel and air mixture produces energy in the form of heat that
creates expansion that drives the piston down, and the film inhibits the transfer of
radiant heat. This directly results in higher combustion temperature, greater
expansion, and more power.
Second; EcoTek-1 film provides is a polished surface effect that allows more
even distribution of the fuel. It can be compared to the beading of water on a
polished paint job. The micro film attracts the liquid fuel resulting in better fuel
distribution that shapes the charge to yield more power.
Third; The film is serving as a catalyst precursor to react with the catalyst
component in EcoTek-1 itself. The active compounds of EcoTek-1 in
combination with the heat in the cylinder cause a catalytic reaction that promotes
better disassociation of chemicals and better burn. The catalytic reaction is also
exothermic and produces heat. Altogether, these three benefits result in a total of
30 to 40% more expansion in the cylinder with an equal amount of fuel.
Additional Benefits:
EcoTek-1’s esters Winter Blend Label Branded products pour-point is - 31
degrees F significantly lower than other competitive fuel additive ester products.
Below is a diagram of a combustion chamber, where as you can see, the areas
around the Piston Tops and Cylinder walls are relatively cooler. These are the
areas where impurities tend to build up and form deposits. EcoTek-1™
combustion chamber catalyst bonds to these impurities and deposits, and as a
catalyst it allows a chemical reaction to happen at a temperature where it
normally wouldn’t happen. This chemical reaction allows the impurities to
completely combust, and the deposits to burn off.
Because EcoTek-1™ combustion chamber catalyst agents clean out the
combustion chamber, there's no need for an Octane Requirement Increase
(ORI), so if you're using a higher octane fuel to get better performance out of
your vehicle you can stop wasting your money and switch to EcoTek-1™.
Technical Discussion
CONTINUED USE: 1-ounce for every 20 - gallons at fill-up, save 15% or more on Fuel; Gas,
Diesel, Bio-Diesel, Ethanol, CNG, LPG.
EcoTek-1 Benefits:
- EcoTek-1 treats twice the fuel than the competition, providing your customer 100% more ROI.
- EcoTek-1 is the perfect additive for all bio-fuels as it contains no petroleum.
- EcoTek-1 is bio-degradable and is 100% ACTIVE esterfied product.
- EcoTek-1’s esters are made from 100% bio-renewable sources.
- EcoTek-1’s esters pour-point Winter Blend Label Branded Product is minimum -31 degrees F
Significantly lower than other ester derived fuel additive products.
In Summary EcoTek-1:
- Improves fuel efficiency 15% or more
- Reduces carbon, NOX, emissions 30% or more
- Reduces engine operating temperature
- Reduces maintenance costs
- Extends equipment wear-life
- Is safe for the environment
Price Example:
(Low volume price matrix per 55 gallon drum $6,875.00 comparison to your customer)
Competitive P. - 1280 - 1 oz - $0.98 per oz / = 10.00 Gallons Fuel = $0.10 cents cost per gallon fuel.
EcoTek-1 (GET) 2500 - 1 oz - $0.98 per oz / = 19.53 Gallons Fuel = $0.05 cents cost per gallon fuel.
GreenEcoTek Additives Division is a Commercial / Industrial supplier of Fuel, Oil, Gear environmentally
friendly products that work beyond industry expectations. EcoTek-1 (Fuel Additive) ET-50 (Oil Additive)
EcoPro-1, EcoPro-2 (Fuel and Oil additive). Our motto is to under promise and over deliver.
Please keep in mind the increased fuel economy and emission reduction claims regarding
EcoTek-1 Mileage and emissions claims are very conservative due to FTC (Federal Trade
Commission) over sight on all fuel additives products. We suggest you buy, try, and decide.
WARNING: Do not exceed suggested use. If you want to save money on fuel costs, clean
abrasive deposits out of your engine and keep them out, extend engine life, reduce your vehicles
emissions, improve your overall performance, and clean the environment you live in, EcoTek-1™
are the easiest way to do it.
EcoTek-1 does not void engine manufacturer warranties by compliance with the federal
Magnuson-Moss Act.