You are on page 1of 5

OptiX OSN 7500 Product Description

Contents

Contents
A Compliant Standards.............................................................................................................. A-1
A.1 ITU-T Recommendations............................................................................................................................A-1 A.2 IEEE Standards............................................................................................................................................A-3 A.3 IETF Standards............................................................................................................................................A-3 A.4 Environment Related Standards ..................................................................................................................A-3

Issue 04 (2007-12-10)

Huawei Technologies Proprietary

OptiX OSN 7500 Product Description

A Compliant Standards

A
A.1 ITU-T Recommendations
Recommendation G.692 G.694.1 G.694.2 G.702 G.703 G.704 G.707 G.775 G.773 G.774 15 G.783 G.784 G.803 G.813 G.823 Description

Compliant Standards

This chapter lists the standards that OptiX OSN 7500 conforms to.

Optical interfaces for multi-channel systems with optical amplifiers Spectral grids for WDM applications: DWDM frequency grid Spectral grids for WDM applications: CWDM wavelength grid Digital hierarchy bit rates Physical/Electrical characteristic of hierarchical digital interfaces Synchronous frame structures used at 1544, 6312, 2048, 8448 and 44736kbit/s hierarchical levels Network node interface for the synchronous digital hierarchy (SDH) Loss of signal (LOS) and alarm indication signal (AIS) defect detection and clearance criteria Protocol suites for Q-interfaces for management of transmission systems Synchronous digital hierarchy (SDH) management information model for the network element view Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks Synchronous digital hierarchy (SDH) management Architectures of transport networks based on the synchronous digital hierarchy (SDH) Timing characteristics of SDH equipment slave clocks (SEC) The control of jitter and wander within digital networks which are based on the 2048 kbit/s hierarchy.

Issue 04 (2007-12-10)

Huawei Technologies Proprietary

A-1

A Compliant Standards

OptiX OSN 7500 Product Description

Recommendation G.824 G.825 G.826 G.831 G.841 G.842 G.957 G.958 Q.811 Q.812 M.3010 G.661 G.662 G.663 X.86 G.7041 G.7042 I.610 I.630

Description The control of jitter and wander within digital networks which are based on the 1544 kbit/s hierarchy. The control of jitter and wander within digital networks which are based on the synchronous digital hierarchy (SDH). Error performance parameters and objectives for international, constant bit rate digital paths at or above the primary rate. Management capabilities of transport networks based on the synchronous digital hierarchy (SDH). Types and characteristics of SDH network protection architectures Cooperation of the SDH network protection structures Optical interfaces of equipments and systems relating to the synchronous digital hierarchy Digital line systems based on the synchronous digital hierarchy for use on optical fiber cables Lower layer protocol profiles for the Q3-interface Upper layer protocol profiles for the Q3-interface Principles for a telecommunications management network Definition and test methods for the relevant generic parameters of optical fiber amplifiers Generic characteristics of optical fiber amplifier devices and sub-systems Application-related aspects of optical fiber amplifier devices and sub-systems Ethernet over LAPS Generic framing procedure (GFP) Link capacity adjustment scheme (LCAS) B-ISDN operation and maintenance principles and functions ATM protection switching

A-2

Huawei Technologies Proprietary

Issue 04 (2007-12-10)

OptiX OSN 7500 Product Description

A Compliant Standards

A.2 IEEE Standards


Standard IEEE802.3 IEEE802.3u IEEE 802.3z IEEE802.1 q IEEE802.3ad IEEE802.1D IEEE802.17 Description Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specification Media access control (MAC) parameters, physical Layer, medium attachment units, and repeater for 100 Mb/s operation, type 100Base-T Media access control (MAC) parameters, physical layer, repeater and management parameters for 1000 Mb/s operation Virtual bridged local area networks Aggregation of multiple link segments Media access control (MAC) Bridges Resilient packet ring access method and physical layer specifications

A.3 IETF Standards


Standard RFC2615(1999) RFC1662(1994) RFC1661(1994) RFC2514 Description Point-to-point protocol (PPP) over SONET/SDH PPP in HDLC-like framing The point-to-point protocol (PPP) Definitions of textual conventions and OBJECT-IDENTITIES for ATM management

A.4 Environment Related Standards


Standard IEC 61000 ETS 300 019-1-3 NEBS GR-63-CORE Description Electromagnetic compatibility (EMC) Class 3.2 partly temperature-controlled location Network equipment-building system (NEBS) requirements: physical protection

Issue 04 (2007-12-10)

Huawei Technologies Proprietary

A-3

You might also like