You are on page 1of 16

Series SDF-AF

Axial Flow Forced Air Turnover System

Indirect-Fired Heating and Cooling


450 to 4,000 MBH (113 to 1,010 Mcal/hr) Output

jchvacglobal.com

Low-Cost Heating/Cooling Solutions


for Commercial and Industrial Applications
The Series SDF-AF is a packaged axial flow forced air turnover system for heating, cooling or ventilation, delivering high volume, low
velocity air for quiet operation in large volume commercial / industrial warehousing and production facilities. It can reduce heating and
cooling costs by up to 40% over traditional conditioning systems and its packaged design installs quickly, requires no ductwork and is
easy to maintain. The SDF-AF energy-efficient axial fans provide air turnover rates of 1 to 4 times each hour mixing the air thoroughly
for uniform temperature and humidity from floor to ceiling.

Traditional Heating Systems


Air stratification is a condition where air, at different temperatures,
form layers within the building space trapping warm air at higher
elevations. The warmer air, therefore, cannot re-circulate throughout
the remainder of the building, creating a greater demand on the
system to maintain space comfort.

Series SDF-AF
The Series SDF-AF draws in the colder air at the ground level,
heating or cooling the air and returning it to the space through a
large supply air discharge plenum to create a highly efficient air
flow pattern. The result is temperature uniformity for greater space
comfort that is both quiet and cost efficient.

Flexible Fuel Burning Options


The SDF-AF incorporates standard fuel burning equipment that utilizes a forced draft combustion
system. Fuel options include natural gas, LPG and CS #2 fuel oil as well as combination fuel
input arrangements. The SDF-AF can also be configured for high elevation operation and low
emission performance applications.

The Most Trusted Name in the Industry


Jackson & Church HVAC Global provides a diverse offering of packaged indirect-fired duct heating
and cooling systems for use in industrial and commercial comfort applications. Throughout the
world, Jackson & Church HVAC Global products provide reliable service at sustained operating
efficiencies meeting or exceeding established industry codes and standards.

Series SDF-AF Design Features


Self-Contained For Easy Installation
Jackson & Church HVAC Global Series SDF-AF packaged axial flow
forced air turnover systems are specifically suited for continuous
air recirculation operation in industrial and commercial space
comfort heating and cooling applications. The SDF-AF conditions
both outside and return air, and can be configured as a completely
self-contained system eliminating the need for ductwork to deliver
tempered air.

Available Options Enhance Performance


The SDF-AF packaged axial flow forced air turnover systems arrive
complete with many standard performance and safety features. An
optional induced draft fan facilitates a negative pressure condition
within the combustion chamber. This assures combustion stability
and aids in preventing escape of flue gases to tempered space in
the event of heat exchanger integrity failure. The flexible design
permits optional steam, hot water and electric coil heating as well
as chilled water and direct expansion coil cooling mediums.

Engineered for Todays Demanding Applications


The SDF-AF includes a high-efficiency stainless steel air heat
exchanger furnace that provides even heat release rates to assure
reduced material stress. Oversized outside/return air inlet and supply
air discharge plenums deliver large volume CFM (m/min) under
low velocity for reduced noise operation. Continuous-operation
design eliminates air stratification in large volume industrial and
commercial spaces preventing thermal barriers of layered stratified
air resulting in uniform temperature and humidity levels.

Meets or Exceeds Stringent Industry Standards


Jackson & Church HVAC Global Series SDF-AF packaged axial
flow forced air turnover systems are designed, constructed and
evaluated to meet or exceed industry standards. The product is an
NFPA classified Category IV appliance and is available as a cETLus
Listed package. Other available compliance standards include
UL, FM Global, GAP and construction suitable for use in NEMA
classified indoor or outdoor non-hazardous locations.

450 to 4,000 MBH (113 to 1,010 Mcal/hr) Output


Heavy-gauge stainless steel
heat exchanger construction

Gas-tight bolted flue


gas exit assembly
Optional induced draft fan

Reversing chamber

Condensate drain
connection
Forced-draft fuel
burning equipment

Liberal volume
combustion chamber
Air Flow

Nomenclature
Series

MBH Output Fuel


CFM (1)

SDF-AF 350/1000
45/75, 50/75
60/125, 75/125
85/170, 100/170
125/250, 150/250
175/340, 175/400
200/340, 200/400
225/500, 225/600
250/500, 250/600
275/600, 300/600

Fuel
Configuration
Burner System

NG

XX- NA
NG- Natural Gas
LP- LPG
O2- CS #2 Fuel Oil
GO- NG / Oil (2)
LO- LPG / Oil (2)
HW- Hot Water Coil (3)
EC- Electric Coil (4)
SC- Steam Coil (3)

FU

Return Air
Plenum (6)
S S S P

FU- Floor Upright

X- NA
2- 2-Stage
3- 3:1 TDR (5)
4- 10:1 TDR (5)

Supply Air
Plenum (7)
S S S P

P- Fixed Panel
S- Screen

P- Fixed Panel
S- Screen
A- Aluminum FIlter
D- Disposable Filter

300/850, 300/1000
325/850, 325/1000
350/850, 350/1000
375/850, 375/1000
400/850, 400/1000

ID Fan
DIscharge

Notes:
(1) May be additionally suffixed to indicate reduced MBH output
(2) Manual fuel changeover
(3) Suffix with MBH capacity
(4) Suffix with kW capacity
(5) Full modulation sequence turn-down ratio / fuel burner option 4 available with NG / LP only

Damper
Options

OAI
Location

X- NA
1- OA Inlet
2- OA Inlet Damper
3- RA Inlet Damper
4- OA & RA Damper
X- NA
1- 45 Left
2- 45 Right
3- 90 Left (8)
4- 90 Right (8)
5- Vertical (8)

Options

X- NA
2- Position
4- Position

X- NA
1- Chilled Water Coil (9)
2- Direct Expansion Coil (9)
3- 5 (1.5m) Extended Plenum
4- 10 (3m) Extended Plenum
5- 15 (4.5m) Extended Plenum
6- 20 (6m) Extended Plenum (10)
7- SA OA Plenum
8- Weather Casing

(6) RA inlet screen SSSS standard


(7) SA discharge screen SSSS standard
(8) Limited to WP construction only
(9) Suffix with ton capacity- SA plenum A coil available, consult factory
(10) (2) 10 (3m) extended plenum section maximum

SUPPLY AIR

SUPPLY AIR
(SA) PLENUM

SUPPLY AIR

N/P

B
S
ID FAN
R

FUEL BURNER

INDIRECT-FIRED
DUCT FURNACE

AXIAL FAN SECTION

RETURN AIR
(RA) PLENUM

RETURN AIR

RETURN AIR

LEFT ELEVATION

FRONT ELEVATION

BREAKPOINT - DISASSEMBLED SECTIONAL SHIPMENT

Nominal Ratings
Sea Level to
2000FT (610m)
Gross Output
Max. Standard
Output
Air Delivery
Temperature Rise
Natural Gas
Fuel Input
LPG
Rate (1)
CS Light Oil
FSHS Total
Furnace Volume
Furnace Heat
Release Rate
Combustion Air
SS HX
Fireside Requirement
ID Fan Fresh Air
Data
Requirement
Flue Gas
Flow Rate (2)
Flue Gas
Flow Velocity (2)

Series SDF-AF Model Number

Units
US-IP

SI

SDF-AF-45/75

SDF-AF-50/75

SDF-AF-60/125

SDF-AF-75/125

SDF-AF-85/170

SDF-AF-100/170

MBH

Mcal/hr

450

113.64

500

126.26

600

151.52

750

189.39

850

214.65

1000

252.53

CFM

m/min

7500

212.40

7500

212.40

12500

354.00

12500

354.00

17000

481.44

17000

481.44

F
CFH
CFH
GPH
SF
CF

C
m/hr
m/hr
l/hr
m
m

55
562
225
4
97.6
8.3

30.56
15.92
6.37
15.14
9.07
0.24

62
625
250
4.5
97.6
8.3

34.44
17.70
7.08
17.03
9.07
0.24

44
750
300
5.3
128.8
11.9

24.44
21.24
8.50
20.06
11.97
0.34

55
937
375
6.7
128.8
11.9

30.56
26.54
10.62
25.36
11.97
0.34

46
1062
425
7.5
152.5
14.5

25.56
30.08
12.04
28.39
14.17
0.41

54
1250
500
8.9
152.5
14.5

30.00
35.40
14.16
33.69
14.17
0.41

MBH/CF

Mcal/m

67.7

604.10

75.3

671.91

63

562.16

78.7

702.25

73.2

653.17

86.2

769.18

CFM/MBH

m/min / Mcal/hr

112.4

12.61

125

14.02

150

16.82

187.4

21.02

212.4

23.82

250

28.04

SCFM

S m/min

54

1.53

60

1.70

72

2.04

90

2.55

102

2.89

120

3.40

ACFM

A m/min

215.4

6.10

239.5

6.78

287.5

8.14

359.2

10.17

407.1

11.53

479.2

13.57

617.1

188.09

686.2

209.15

527.5

160.78

659

200.86

746.9

227.65

879.2

267.97

FPM

m/min

NG/LP Forced
Draft Fuel Burner (3)

HP

kW

O2/GO/LO Forced
Draft Fuel Burner (3)

HP

Electrical Induced Draft Fan


Direct Drive (4)
Axial Fan - Belt Drive

V-PH-Hz
kW
V-PH-Hz
HP

kW
V-PH-Hz
QTY - HP
QTY - kW
V-PH-Hz (5)
SONES

Notes :
(1) Natural Gas - HHV 1,000 BTU-CF (8,916 Kcal/m)
LPG - HHV 2,500 BTU-CF (22,290 Kcal/m)
CS Light Oil - HHV 140,000 BTU-US Gallon (9,340 Kcal/l)
(2) ACFM at 500F (260C)
(3) 120V-1PH-60Hz Control Circuit Transformer Optional
(4) Optional
(5) Other 3-Phase Voltages Available
(6) UL Compliance to 2500 MBH Input
GAP Compliance - Consult Factory
(7) Damper Option 1 - Add 1 (2.5cm) Flange to Dimension E
(8) Damper Option 2 - Add 6 (15cm) to Dimension E
(9) Damper Option 3 - Add 8 (20cm) to Dimension F / G
Less ID Fan - 12 (30.48cm)
Less ID Fan - 14 (35.56cm)

0.25
0.19
120-1-60
0.33
0.25
120-1-60
0.25
0.19
120-1-60
2 - .75
2 - .56
200/230/460-3-60
14

0.25
0.19
120-1-60
0.33
0.25
120-1-60
0.25
0.19
120-1-60
2 - .75
2 - .56
200/230/460-3-60
14

0.33
0.25
120-1-60
0.33
0.25
120-1-60
0.25
0.19
120-1-60
2-1
2 - .75
200/230/460-3-60
13.5

0.33
0.25
120-1-60
0.33
0.25
120-1-60
0.25
0.19
120-1-60
2-1
2 - .75
200/230/460-3-60
13.5

0.33
0.25
120-1-60
0.33
0.25
120-1-60
0.25
0.19
120-1-60
2-2
2 - 1.49
200/230/460-3-60
12

0.33
0.25
120-1-60
0.33
0.25
120-1-60
0.25
0.19
120-1-60
2-2
2 - 1.49
200/230/460-3-60
12

Information contained herein is provided for general information purposes only, not to be relied upon for final
fabrication or arrangement configuration.
Federal, state, local and provincial Jurisdictions Having Authority (JHA) may mandate certain requirements and/or
clearances not incoporated herein.
All dimensions and weights are approximate, subject to change without notice, and typographical error.
AESYS reserves the right, without limitation, to change information contained herein due to product revisions,
manufacturing processes, component technology and/or project specification.

Series SDF-AF: 450 to 1,000 MBH (113 to 252 Mcal/hr)


S8

S7
Q

S6

S5

A
E

RA INLET DRAW-THROUGH
DX COILS (OPTION)

R3

SA OA PLENUM
(OPTION)

R4

R2

R1

RA INLET AND SA
DISCHARGE ORIENTATION
E + 4-1/8"

RA INLET PERIMETER
FILTER RACKS
(OPTION)
Nominal Dimensions
Units
Description
US-IP
SI
Lengths

A
Casing Overall
inch
cm
B
Induced Draft Fan
inch
cm
C
Forced Draft Burner
inch
cm
D
Turbulator Pull
inch
cm
Widths

E
Casing Overall
inch
cm
Heights

F
Casing Overall
inch
cm
G
RA Inlet Plenum
inch
cm
H
Axial Fan Section
inch
cm
J
Duct Furnace Section
inch
cm
K
SA Discharge Plenum
inch
cm
L
Extended Plenum (4)
ft
m
M
SA OA Plenum (4)
inch
cm
Connections

Induced Draft Fan

Min Flue Gas


Breeching

Q
Q (6)

Natural Gas / LPG


Gas Pressure Required
(Min-Max)

inch

SDF-AF-45/75

69.125
175.58
15.875
40.32
26
66.04
24
60.96

30.125
76.52

121.125
307.66
48
121.92
NA
NA
43.125
109.54
30
76.20

A + 4-1/8"

EXTENDED PLENUM
(OPTION)

Physical Dimensions
SDF-AF-50/75
SDF-AF-60/125
SDF-AF-75/125
SDF-AF-85/170

69.125
175.58
69.125
175.58
69.125
175.58
81.125
206.06
15.875
40.32
15.875
40.32
15.875
40.32
15.875
40.32
26
66.04
26
66.04
26
66.04
26
66.04
24
60.96
24
60.96
24
60.96
30
76.20

30.125
76.52
39.125
99.38
39.125
99.38
39.125
99.38

121.125
307.66
133.125
338.14
133.125
338.14
147.125
373.70
48
121.92
50
127.00
50
127.00
47
119.38
NA
NA
NA
NA
NA
NA
10
25.40
43.125
109.54
51.125
129.86
51.125
129.86
51.125
129.86
30
76.20
32
81.28
32
81.28
39
99.06
Maximum (2) 10 (3m) Extended Plenum Sections
16
40.64
18
45.72
18
45.72
20
50.80

16

40.64

cm

6.5 x 8.5

16.51 x
21.59

6.5 x 8.5

16.51 x
21.59

6.5 x 8.5

16.51 x
21.59

6.5 x 8.5

16.51 x
21.59

6.5 x 8.5

SDF-AF-100/170

81.125
206.06
15.875
40.32
26
66.04
30
76.20

39.125
99.38

147.125
373.70
47
119.38
10
25.40
51.125
129.86
39
99.06
20

50.80

16.51 x
21.59

6.5 x 8.5

16.51 x
21.59

inch

cm

20.32

20.32

10

25.40

10

25.40

10

25.40

10

25.40

NPS

DN

25
12.7 68.58

25
12.7 68.58

25
15.24 68.58

25
15.24 68.58

25
22.86 68.58

25
27.94 68.58

wc

cm wc

5 - 27

CS Light Oil Pump

QTY
- NPS

QTY
- DN

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

Condensate Drain

QTY
- NPS

QTY
- DN

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

OA Inlet ID (7) (8)

inch

cm

22.5 x 65

57.15 x
165.1

22.5 x 65

57.15 x
165.1

28 x 65

71.12 x
165.1

28 x 65

71.12 x
165.1

33.5 x 77

83.82 x
195.58

33.5 x 77

83.82 x
195.58

RA Inlet Damper (9)

inch

cm

18 x 45

45.72 x
114.3

18 x 45

45.72 x
114.3

27 x 45

68.58 x
114.3

27 x 45

68.58 x
114.3

27 x 57

68.58 x
144.78

27 x 57

68.58 x
144.78

Ship Weight

Lbs

Kg

1300

589.67

1300

589.67

1775

805.13

1775

805.13

2200

997.90

2200

Shipment

Disassembled
Sectional Shipment

QTY

5 - 27

6 - 27

6 - 27

9 - 27

11 - 27

997.90
3

SUPPLY AIR

SUPPLY AIR
(SA) PLENUM

SUPPLY AIR

N/P

B
S
ID FAN
R

FUEL BURNER

INDIRECT-FIRED
DUCT FURNACE

AXIAL FAN SECTION

RETURN AIR
(RA) PLENUM

RETURN AIR

RETURN AIR

LEFT ELEVATION

FRONT ELEVATION

BREAKPOINT - DISASSEMBLED SECTIONAL SHIPMENT

Nominal Ratings
Sea Level to
2000FT (610m)
Gross Output
Max. Standard
Output
Air Delivery
Temperature Rise
Natural Gas
Fuel Input
LPG
Rate (1)
CS Light Oil
FSHS Total
Furnace Volume
Furnace Heat
Release Rate
Combustion Air
SS HX
Fireside Requirement
ID Fan Fresh Air
Data
Requirement
Flue Gas
Flow Rate (2)
Flue Gas
Flow Velocity (2)
NG/LP Forced
Draft Fuel Burner (3)
O2/GO/LO Forced
Draft Fuel Burner (3)
Electrical Induced Draft Fan
Direct Drive
Axial Fan - Belt Drive

Series SDF-AF Model Number

Units
US-IP

SI

SDF-AF-125/250

SDF-AF-150/250

SDF-AF-175/340

SDF-AF-175/400

SDF-AF-200/340

SDF-AF-200/400

MBH

Mcal/hr

1250

315.66

1500

378.79

1750

441.92

1750

441.92

2000

505.05

2000

505.05

CFM

m/min

25000

708.00

25000

708.00

34000

962.88

40000

1132.80

34000

962.88

40000

1132.80

F
CFH
CFH
GPH
SF
CF

C
m/hr
m/hr
l/hr
m
m

46
1562
625
11.1
217
22.3

25.56
44.24
17.70
42.02
20.16
0.63

55
1875
750
13.4
217
22.3

30.56
53.10
21.24
50.72
20.16
0.63

48
2187
875
15.6
257.9
34.6

26.67
61.94
24.78
59.05
23.96
0.98

40
2187
875
15.6
257.9
34.6

22.22
61.94
24.78
59.05
23.96
0.98

54
2500
1000
17.8
257.9
34.6

30.00
70.80
28.32
67.38
23.96
0.98

46
2500
1000
17.8
257.9
34.6

25.56
70.80
28.32
67.38
23.96
0.98

MBH/CF

Mcal/m

70

624.62

84

749.54

63.2

563.94

63.2

563.94

72.2

644.25

72.2

644.25

CFM/MBH

m/min / Mcal/hr

312.4

35.03

375

42.06

437.4

49.05

437.4

49.05

500

56.07

500

56.07

SCFM

S m/min

120

3.40

144

4.08

168

4.76

168

4.76

192

5.44

192

5.44

ACFM

A m/min

598.7

16.96

718.7

20.35

838.3

23.74

838.3

23.74

958.3

27.14

958.3

27.14

FPM

m/min

762.2

232.31

915

278.88

1067.3

325.30

1067.3

325.30

1220.1

371.87

1220.1

371.87

HP

kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
QTY - HP
QTY - kW
V-PH-Hz (5)
SONES

Notes :
(1) Natural Gas - HHV 1,000 BTU-CF (8,916 Kcal/m)
LPG - HHV 2,500 BTU-CF (22,290 Kcal/m)
CS Light Oil - HHV 140,000 BTU-US Gallon (9,340 Kcal/l)
(2) ACFM at 500F (260C)
(3) 120V-1PH-60Hz Control Circuit Transformer Optional
(4) Optional
(5) Other 3-Phase Voltages Available
(6) UL Compliance to 2500 MBH Input
GAP Compliance - Consult Factory
(7) Damper Option 1 - Add 1 (2.5cm) Flange to Dimension E
(8) Damper Option 2 - Add 6 (15cm) to Dimension E
(9) Damper Option 3 - Add 8 (20cm) to Dimension F / G

0.33
0.25
120-1-60
0.75
0.56
200/230/460-3-60
0.75
0.56
200/230/460-3-60
2-3
2 - 2.24
200/230/460-3-60
13

0.33
0.25
120-1-60
0.75
0.56
200/230/460-3-60
0.75
0.56
200/230/460-3-60
2-3
2 - 2.24
200/230/460-3-60
13

0.5
0.37
200/230/460-3-60
0.75
0.56
200/230/460-3-60
0.75
0.56
200/230/460-3-60
2-3
2 - 2.24
200/230/460-3-60
14

0.5
0.37
200/230/460-3-60
0.75
0.56
200/230/460-3-60
0.75
0.56
200/230/460-3-60
2-5
2 - 3.73
200/230/460-3-60
22

0.75
0.56
200/230/460-3-60
1.5
1.12
200/230/460-3-60
0.75
0.56
200/230/460-3-60
2-3
2 - 3.73
200/230/460-3-60
14

0.75
0.56
200/230/460-3-60
1.5
1.12
200/230/460-3-60
0.75
0.56
200/230/460-3-60
2-5
2 - 3.73
200/230/460-3-60
22

Information contained herein is provided for general information purposes only, not to be relied upon for final
fabrication or arrangement configuration.
Federal, state, local and provincial Jurisdictions Having Authority (JHA) may mandate certain requirements and/or
clearances not incoporated herein.
All dimensions and weights are approximate, subject to change without notice, and typographical error.
AESYS reserves the right, without limitation, to change information contained herein due to product revisions,
manufacturing processes, component technology and/or project specification.

Series SDF-AF: 1,250 to 2,000 MBH (315 to 505 Mcal/hr)


S8

S7
Q

S6

S5

A
E

RA INLET DRAW-THROUGH
DX COILS (OPTION)

R3

SA OA PLENUM
(OPTION)

R4

R2

R1

RA INLET AND SA
DISCHARGE ORIENTATION
E + 4-1/8"

RA INLET PERIMETER
FILTER RACKS
(OPTION)
Nominal Dimensions
Units
Description
US-IP
SI
Lengths

A
Casing Overall
inch
cm
B
Induced Draft Fan
inch
cm
C
Forced Draft Burner
inch
cm
D
Turbulator Pull
inch
cm
Widths

E
Casing Overall
inch
cm
Heights

F
Casing Overall
inch
cm
G
RA Inlet Plenum
inch
cm
H
Axial Fan Section
inch
cm
J
Duct Furnace Section
inch
cm
K
SA Discharge Plenum
inch
cm
L
Extended Plenum (4)
ft
m
M
SA OA Plenum (4)
inch
cm
Connections

Induced Draft Fan

Min Flue Gas


Breeching

Q
Q (6)

Natural Gas / LPG


Gas Pressure Required
(Min-Max)

inch

cm

SDF-AF-125/250

88
223.52
18.25
46.36
30
76.20
30
76.20

50
127.00

162.5
412.75
50
127.00
15
38.10
64
162.56
33.5
85.09
18

45.72

8.5 x 12

21.59 x
30.48

A + 4-1/8"

EXTENDED PLENUM
(OPTION)

Physical Dimensions
SDF-AF-150/250
SDF-AF-175/340
SDF-AF-175/400
SDF-AF-200/340

88
223.52
100
254.00
100
254.00
100
254.00
18.25
46.36
18.25
46.36
18.25
46.36
18.25
46.36
30
76.20
30
76.20
30
76.20
30
76.20
30
76.20
36
91.44
36
91.44
36
91.44

50
127.00
50
127.00
50
127.00
50
127.00

162.5
412.75
162.5
412.75
162.5
412.75
162.5
412.75
50
127.00
50
127.00
50
127.00
50
127.00
15
38.10
15
38.10
15
38.10
15
38.10
64
162.56
64
162.56
64
162.56
64
162.56
33.5
85.09
33.5
85.09
33.5
85.09
33.5
85.09
Maximum (2) 10 (3m) Extended Plenum Sections
18
45.72
18
45.72
18
45.72
18
45.72

8.5 x 12

21.59 x
30.48

8.5 x 12

21.59 x
30.48

8.5 x 12

21.59 x
30.48

8.5 x 12

21.59 x
30.48

SDF-AF-200/400

100
254.00
18.25
46.36
30
76.20
36
91.44

50
127.00

162.5
412.75
50
127.00
15
38.10
64
162.56
33.5
85.09
18

45.72

8.5 x 12

21.59 x
30.48

inch

cm

12

30.48

12

30.48

12

30.48

12

30.48

12

30.48

12

30.48

NPS

DN

1.25

32
20.32 68.58

1.25

32
27.94 68.58

1.25

32
38.1 68.58

1.25

32
38.1 68.58

1.5

40
38.1 68.58

1.5

40
38.1 68.58

wc

cm wc

8 - 27

CS Light Oil Pump

QTY
- NPS

QTY
- DN

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

Condensate Drain

QTY
- NPS

QTY
- DN

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

OA Inlet ID (7) (8)

inch

cm

28 x 84

71.12 x
213.36

28 x 84

71.12 x
213.36

28 x 96

71.12 x
243.84

28 x 96

71.12 x
243.84

28 x 96

71.12 x
243.84

28 x 96

71.12 x
243.84

RA Inlet Damper (9)

inch

cm

38 x 64

96.52 x
162.56

38 x 64

96.52 x
162.56

38 x 76

96.52 x
193.04

38 x 76

96.52 x
193.04

38 x 76

96.52 x
193.04

38 x 76

96.52 x
193.04

Ship Weight

Lbs

Kg

3500

1587.57

3500

1587.57

4225

1916.43

4250

1927.77

4225

1916.43

4250

Shipment

Disassembled
Sectional Shipment

QTY

11 - 27

15 - 27

15 - 27

15 - 27

15 - 27

1927.77
3

SUPPLY AIR

SUPPLY AIR
(SA) PLENUM

SUPPLY AIR

N/P

B
S
ID FAN
R

FUEL BURNER

INDIRECT-FIRED
DUCT FURNACE

AXIAL FAN SECTION

RETURN AIR
(RA) PLENUM

RETURN AIR

RETURN AIR

LEFT ELEVATION

FRONT ELEVATION

BREAKPOINT - DISASSEMBLED SECTIONAL SHIPMENT

Nominal Ratings
Sea Level to
2000FT (610m)
Gross Output
Max. Standard
Output
Air Delivery
Temperature Rise
Natural Gas
Fuel Input
LPG
Rate (1)
CS Light Oil
FSHS Total
Furnace Volume
Furnace Heat
Release Rate
Combustion Air
SS HX
Fireside Requirement
ID Fan Fresh Air
Data
Requirement
Flue Gas
Flow Rate (2)
Flue Gas
Flow Velocity (2)
NG/LP Forced
Draft Fuel Burner (3)
O2/GO/LO Forced
Draft Fuel Burner (3)
Electrical Induced Draft Fan
Direct Drive
Axial Fan - Belt Drive

Series SDF-AF Model Number

Units
US-IP

SI

SDF-AF-225/500

SDF-AF-225/600

SDF-AF-250/500

SDF-AF-250/600

SDF-AF-275/600

SDF-AF-300/600

MBH

Mcal/hr

2250

568.18

2250

568.18

2500

631.31

2500

631.31

2750

694.44

3000

757.58

CFM

m/min

50000

1416.00

60000

1699.20

50000

1416.00

60000

1699.20

60000

1699.20

60000

1699.20

F
CFH
CFH
GPH
SF
CF

C
m/hr
m/hr
l/hr
m
m

42
2812
1128
20
385.1
71.4

23.33
79.64
31.94
75.71
35.78
2.02

35
2812
1125
20
385.1
71.4

19.44
79.64
31.86
75.71
35.78
2.02

55
3125
1250
22.3
385.1
71.4

30.56
88.50
35.40
84.41
35.78
2.02

38
3125
1250
22.3
385.1
71.4

21.11
88.50
35.40
84.41
35.78
2.02

42
3437
1375
24.5
385.1
71.4

23.33
97.34
38.94
92.74
35.78
2.02

46
3750
1500
26.8
385.1
71.4

25.56
106.20
42.48
101.45
35.78
2.02

MBH/CF

Mcal/m

39.4

351.57

39.4

351.57

43.7

389.94

43.7

389.94

48.1

429.20

52.5

468.47

CFM/MBH

m/min / Mcal/hr

562.4

63.07

562.4

63.07

625

70.09

625

70.09

687.4

77.09

750

84.11

SCFM

S m/min

216

6.12

216

6.12

240

6.80

240

6.80

264

7.48

288

8.16

ACFM

A m/min

1077.9

30.53

1077.9

30.53

1197.9

33.92

1197.9

33.92

1317.5

37.31

1437.5

40.71

FPM

m/min

1008.3

307.32

1008.3

307.32

1120.5

341.52

1120.5

341.52

1232.4

375.62

1344.7

409.85

HP

kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
QTY - HP
QTY - kW
V-PH-Hz (5)
SONES

Notes :
(1) Natural Gas - HHV 1,000 BTU-CF (8,916 Kcal/m)
LPG - HHV 2,500 BTU-CF (22,290 Kcal/m)
CS Light Oil - HHV 140,000 BTU-US Gallon (9,340 Kcal/l)
(2) ACFM at 500F (260C)
(3) 120V-1PH-60Hz Control Circuit Transformer Optional
(4) Optional
(5) Other 3-Phase Voltages Available
(6) FM Compliance to 5000 MBH Input
GAP Compliance - Consult Factory
(7) Damper Option 1 - Add 1 (2.5cm) Flange to Dimension E
(8) Damper Option 2 - Add 6 (15cm) to Dimension E
(9) Damper Option 3 - Add 8 (20cm) to Dimension F / G

1
0.75
200/230/460-3-60
1.5
1.12
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2-5
2 - 3.73
200/230/460-3-60
20

1
0.75
200/230/460-3-60
1.5
1.12
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 7.5
2 - 5.59
200/230/460-3-60
22

1
0.75
200/230/460-3-60
1.5
1.12
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2-5
2 - 3.73
200/230/460-3-60
20

1
0.75
200/230/460-3-60
1.5
1.12
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 7.5
2 - 5.59
200/230/460-3-60
22

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 7.5
2 - 5.59
200/230/460-3-60
22

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 7.5
2 - 5.59
200/230/460-3-60
22

Information contained herein is provided for general information purposes only, not to be relied upon for final
fabrication or arrangement configuration.
Federal, state, local and provincial Jurisdictions Having Authority (JHA) may mandate certain requirements and/or
clearances not incoporated herein.
All dimensions and weights are approximate, subject to change without notice, and typographical error.
AESYS reserves the right, without limitation, to change information contained herein due to product revisions,
manufacturing processes, component technology and/or project specification.

Series SDF-AF: 2,250 to 3,000 MBH (568 to 757 Mcal/hr)


S8

S7
Q

S6

S5

A
E

RA INLET DRAW-THROUGH
DX COILS (OPTION)

R3

SA OA PLENUM
(OPTION)

R4

R2

R1

RA INLET AND SA
DISCHARGE ORIENTATION
E + 4-1/8"

RA INLET PERIMETER
FILTER RACKS
(OPTION)
Nominal Dimensions
Units
Description
US-IP
SI
Lengths

A
Casing Overall
inch
cm
B
Induced Draft Fan
inch
cm
C
Forced Draft Burner
inch
cm
D
Turbulator Pull
inch
cm
Widths

E
Casing Overall
inch
cm
Heights

F
Casing Overall
inch
cm
G
RA Inlet Plenum
inch
cm
H
Axial Fan Section
inch
cm
J
Duct Furnace Section
inch
cm
K
SA Discharge Plenum
inch
cm
L
Extended Plenum (4)
ft
m
M
SA OA Plenum (4)
inch
cm
Connections

Induced Draft Fan

Min Flue Gas


Breeching

Q
Q (6)

Natural Gas / LPG


Gas Pressure Required
(Min-Max)

inch

SDF-AF-225/500

135
342.90
21.75
55.25
31.5
80.01
54
137.16

60
152.40

192.125
488.00
40
101.60
40
101.60
72.125
183.20
40
101.60

A + 4-1/8"

EXTENDED PLENUM
(OPTION)

Physical Dimensions
SDF-AF-225/600
SDF-AF-250/500
SDF-AF-250/600
SDF-AF-275/600

135
342.90
135
342.90
135
342.90
135
342.90
21.75
55.25
21.75
55.25
21.75
55.25
21.75
55.25
31.5
80.01
31.5
80.01
31.5
80.01
31.5
80.01
54
137.16
54
137.16
54
137.16
54
137.16

60
152.40
60
152.40
60
152.40
60
152.40

192.125
488.00
192.125
488.00
192.125
488.00
192.125
488.00
40
101.60
40
101.60
40
101.60
40
101.60
40
101.60
40
101.60
40
101.60
40
101.60
72.125
183.20
72.125
183.20
72.125
183.20
72.125
183.20
40
101.60
40
101.60
40
101.60
40
101.60
Maximum (2) 10 (3m) Extended Plenum Sections
20
50.80
20
50.80
20
50.80
20
50.80

20

50.80

cm

9.5 x 13.5

24.13 x
34.29

9.5 x 13.5

24.13 x
34.29

9.5 x 13.5

24.13 x
34.29

9.5 x 13.5

24.13 x
34.29

9.5 x 13.5

SDF-AF-300/600

135
342.90
21.75
55.25
31.5
80.01
54
137.16

60
152.40

192.125
488.00
40
101.60
40
101.60
72.125
183.20
40
101.60
20

50.80

24.13 x
34.29

9.5 x 13.5

24.13 x
34.29

inch

cm

14

35.56

14

35.56

14

35.56

14

35.56

14

35.56

14

35.56

NPS

DN

50
20.32 68.58

50
20.32 68.58

50
20.32 68.58

50
20.32 68.58

50
27.94 68.58

50
27.94 68.58

wc

cm wc

8 - 27

CS Light Oil Pump

QTY
- NPS

QTY
- DN

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

Condensate Drain

QTY
- NPS

QTY
- DN

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

OA Inlet ID (7) (8)

inch

cm

33.5 x
131

85.09 x
332.74

33.5 x
131

85.09 x
332.74

33.5 x
131

85.09 x
332.74

33.5 x
131

85.09 x
332.74

33.5 x
131

85.09 x
332.74

33.5 x
131

85.09 x
332.74

RA Inlet Damper (9)

inch

cm

48 x 111

121.92 x
281.94

48 x 111

121.92 x
281.94

48 x 111

121.92 x
281.94

48 x 111

121.92 x
281.94

48 x 111

121.92 x
281.94

48 x 111

121.92 x
281.94

Ship Weight

Lbs

Kg

7900

3583.38

8100

3674.10

7900

3583.38

8100

3674.10

8100

3674.10

8100

Shipment

Disassembled
Sectional Shipment

QTY

8 - 27

8 - 27

8 - 27

11 - 27

11 - 27

3674.10
4

SUPPLY AIR

SUPPLY AIR
(SA) PLENUM

SUPPLY AIR

N/P

B
S
ID FAN
R

FUEL BURNER

INDIRECT-FIRED
DUCT FURNACE

AXIAL FAN SECTION

RETURN AIR
(RA) PLENUM

RETURN AIR

RETURN AIR

LEFT ELEVATION

FRONT ELEVATION

BREAKPOINT - DISASSEMBLED SECTIONAL SHIPMENT

Nominal Ratings
Sea Level to
2000FT (610m)
Gross Output
Max. Standard
Output
Air Delivery
Temperature Rise
Natural Gas
Fuel Input
LPG
Rate (1)
CS Light Oil
FSHS Total
Furnace Volume
Furnace Heat
Release Rate
Combustion Air
SS HX
Fireside Requirement
ID Fan Fresh Air
Data
Requirement
Flue Gas
Flow Rate (2)
Flue Gas
Flow Velocity (2)
NG/LP Forced
Draft Fuel Burner (3)
O2/GO/LO Forced
Draft Fuel Burner (3)
Electrical Induced Draft Fan
Direct Drive
Axial Fan - Belt Drive

Series SDF-AF Model Number

Units
US-IP

SI

MBH

Mcal/hr

3000

757.58

3000

757.58

3250

820.71

3250

820.71

3500

883.84

3500

883.84

CFM

m/min

85000

2407.20

100000

2832.00

85000

2407.20

100000

2832.00

85000

2407.20

100000

2832.00

F
CFH
CFH
GPH
SF
CF

C
m/hr
m/hr
l/hr
m
m

33
3750
1500
26.8
385.1
71.4

18.33
106.20
42.48
101.45
35.78
2.02

28
3750
1500
26.8
385.1
71.4

15.56
106.20
42.48
101.45
35.78
2.02

35
4062
1625
29
457.4
100.5

19.44
115.04
46.02
109.78
42.49
2.85

30
4062
1625
29
457.4
100.5

16.67
115.04
46.02
109.78
42.49
2.85

38
4375
1750
31.2
457.4
100.5

21.11
123.90
49.56
118.10
42.49
2.85

32
4375
1750
31.2
457.4
100.5

17.78
123.90
49.56
118.10
42.49
2.85

MBH/CF

Mcal/m

52.5

468.47

52.5

468.47

40.4

360.50

40.4

360.50

43.5

388.16

43.5

388.16

CFM/MBH

m/min / Mcal/hr

750

84.11

750

84.11

812.4

91.11

812.4

91.11

875

98.13

875

98.13

SCFM

S m/min

288

8.16

288

8.16

312

8.84

312

8.84

269

7.62

269

7.62

ACFM

A m/min

1437.5

40.71

1437.5

40.71

1557.1

44.10

1557.1

44.10

1677

47.49

1677

47.49

FPM

m/min

1344.7

409.85

1344.7

409.85

1456.5

443.93

1456.5

443.93

1568.7

478.12

1568.7

478.12

HP

kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
QTY - HP
QTY - kW
V-PH-Hz (5)
SONES

Notes :
(1) Natural Gas - HHV 1,000 BTU-CF (8,916 Kcal/m)
LPG - HHV 2,500 BTU-CF (22,290 Kcal/m)
CS Light Oil - HHV 140,000 BTU-US Gallon (9,340 Kcal/l)
(2) ACFM at 500F (260C)
(3) 120V-1PH-60Hz Control Circuit Transformer Optional
(4) Optional
(5) Other 3-Phase Voltages Available
(6) FM Compliance to 5000 MBH Input
GAP Compliance - Consult Factory
(7) Damper Option 1 - Add 1 (2.5cm) Flange to Dimension E
(8) Damper Option 2 - Add 6 (15cm) to Dimension E
(9) Damper Option 3 - Add 8 (20cm) to Dimension F / G

10

SDF-AF-300/850

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

SDF-AF-300/1000

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

SDF-AF-325/850

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

SDF-AF-325/1000

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

SDF-AF-350/850

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

SDF-AF-350/1000

1.5
1.12
200/230/460-3-60
2
1.49
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

Information contained herein is provided for general information purposes only, not to be relied upon for final
fabrication or arrangement configuration.
Federal, state, local and provincial Jurisdictions Having Authority (JHA) may mandate certain requirements and/or
clearances not incoporated herein.
All dimensions and weights are approximate, subject to change without notice, and typographical error.
AESYS reserves the right, without limitation, to change information contained herein due to product revisions,
manufacturing processes, component technology and/or project specification.

Series SDF-AF: 3,000 to 3,500 MBH (757 to 883 Mcal/hr)


S8

S7
Q

S6

S5

A
E

RA INLET DRAW-THROUGH
DX COILS (OPTION)

R3

SA OA PLENUM
(OPTION)

R4

R2

R1

RA INLET AND SA
DISCHARGE ORIENTATION
E + 4-1/8"

RA INLET PERIMETER
FILTER RACKS
(OPTION)
Nominal Dimensions
Units
Description
US-IP
SI
Lengths

A
Casing Overall
inch
cm
B
Induced Draft Fan
inch
cm
C
Forced Draft Burner
inch
cm
D
Turbulator Pull
inch
cm
Widths

E
Casing Overall
inch
cm
Heights

F
Casing Overall
inch
cm
G
RA Inlet Plenum
inch
cm
H
Axial Fan Section
inch
cm
J
Duct Furnace Section
inch
cm
K
SA Discharge Plenum
inch
cm
L
Extended Plenum (4)
ft
m
M
SA OA Plenum (4)
inch
cm
Connections

Induced Draft Fan

Minimum Flue Gas


Breeching

Q
Q (6)

Natural Gas / LPG


Gas Pressure Required
(Min-Max)

inch

SDF-AF-300/850

160
406.40
21.75
55.25
31.5
80.01
54
137.16

78
198.12

212.125
538.80
50
127.00
40
101.60
72.125
183.20
50
127.00

A + 4-1/8"

EXTENDED PLENUM
(OPTION)

Physical Dimensions
SDF-AF-300/1000
SDF-AF-325/850
SDF-AF-325/1000
SDF-AF-350/850

160
406.40
160
406.40
160
406.40
160
406.40
21.75
55.25
21.75
55.25
21.75
55.25
21.75
55.25
31.5
80.01
31.5
80.01
31.5
80.01
31.5
80.01
54
137.16
54
137.16
54
137.16
54
137.16

78
198.12
78
198.12
78
198.12
78
198.12

212.125
538.80
218.125
554.04
218.125
554.04
218.125
554.04
50
127.00
50
127.00
50
127.00
50
127.00
40
101.60
40
101.60
40
101.60
40
101.60
72.125
183.20
78.125
198.44
78.125
198.44
78.125
198.44
50
127.00
50
127.00
50
127.00
50
127.00
Maximum (2) 10 (3m) Extended Plenum Sections
24
60.96
24
60.96
24
60.96
24
60.96

24

60.96

cm

9.5 x 13

24.13 x
34.29

9.5 x 13

24.13 x
34.29

9.5 x 13

24.13 x
34.29

9.5 x 13

24.13 x
34.29

9.5 x 13

24.13 x
34.29

SDF-AF-350/1000

160
406.40
21.75
55.25
31.5
80.01
54
137.16

78
198.12

218.125
554.04
50
127.00
40
101.60
78.125
198.44
50
127.00
24

60.96

9.5 x 13

24.13 x
34.29

inch

cm

14

35.56

14

35.56

14

35.56

14

35.56

14

35.56

14

35.56

NPS

DN

50
27.94 68.58

50
27.94 68.58

2.5

65
20.32 68.58

2.5

65
20.32 68.58

2.5

65
20.32 68.58

2.5

65
20.32 68.58

wc

cm wc

11 - 27

CS Light Oil Pump

QTY
- NPS

QTY
- DN

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

2 - 0.25

2-8

Condensate Drain

QTY
- NPS

QTY
- DN

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

2 - .5

2 - 15

OA Inlet ID (7) (8)

inch

cm

33.5 x
156

85.09 x
396.24

33.5 x
156

85.09 x
396.24

33.5 x
156

85.09 x
396.24

33.5 x
156

85.09 x
396.24

33.5 x
156

85.09 x
396.24

33.5 x
156

85.09 x
396.24

RA Inlet Damper (9)

inch

cm

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

Ship Weight

Lbs

Kg

10200

4626.64

10400

4717.36

10400

4717.36

10600

4808.08

10400

4717.36

10600

Shipment

Disassembled
Sectional Shipment

QTY

11 - 27

8 - 27

8 - 27

8 - 27

8 - 27

4808.08
4

11

SUPPLY AIR

SUPPLY AIR
(SA) PLENUM

SUPPLY AIR

N/P

B
S
ID FAN

INDIRECT-FIRED
DUCT FURNACE

AXIAL FAN SECTION

FUEL BURNER

RETURN AIR
(RA) PLENUM

RETURN AIR

RETURN AIR

LEFT ELEVATION

FRONT ELEVATION

BREAKPOINT - DISASSEMBLED SECTIONAL SHIPMENT

Nominal Ratings
Sea Level to 2000FT (610m)
Gross Output
Output Max Standard Air Delivery
Temperature Rise
Natural Gas
Fuel Input
LPG
Rate (1)
CS Light Oil
FSHS Total
Furnace Volume
Furnace Heat Release Rate
SS HX
Fireside Combustion Air Requirement
Data
ID Fan Fresh Air Requirement
Flue Gas Flow Rate (2)
Flue Gas Flow Velocity (2)
NG/LP Forced Draft
Fuel Burner (3)
O2/GO/LO Forced Draft
Fuel Burner (3)
Electrical Induced Draft Fan
Direct Drive
Axial Fan - Belt Drive

Units
US-IP
SI
MBH
Mcal/hr
CFM
m/min
F
C
CFH
m/hr
CFH
m/hr
GPH
l/hr
SF
m
CF
m
MBH/CF
Mcal/m
CFM/MBH m/min / Mcal/hr
SCFM
S m/min
ACFM
A m/min
FPM
m/min
HP
kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
HP
kW
V-PH-Hz (5)
QTY - HP
QTY - kW
V-PH-Hz (5)
SONES

Notes :
(1) Natural Gas - HHV 1,000 BTU-CF (8,916 Kcal/m)
LPG - HHV 2,500 BTU-CF (22,290 Kcal/m)
CS Light Oil - HHV 140,000 BTU-US Gallon (9,340 Kcal/l)
(2) ACFM at 500F (260C)
(3) 120V-1PH-60Hz Control Circuit Transformer Optional
(4) Optional
(5) Other 3-Phase Voltages Available
(6) FM Compliance to 5000 MBH Input
GAP Compliance - Consult Factory
(7) Damper Option 1 - Add 1 (2.5cm) Flange to Dimension E
(8) Damper Option 2 - Add 6 (15cm) to Dimension E
(9) Damper Option 3 - Add 8 (20cm) to Dimension F / G

12

SDF-AF-375/850
3750
946.97
85000
2407.20
41
22.78
4687
132.74
1875
53.10
33.4
126.43
535.1
49.71
100.5
2.85
46.6
415.82
937.4
105.13
360
10.20
1796.6
50.88
1680.6
512.23
3
2.24
200/230/460-3-60
3
2.24
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

Series SDF-AF Model Number


SDF-AF-375/1000
SDF-AF-400/850
3750
946.97
4000
1010.10
100000
2832.00
85000
2407.20
35
19.44
44
24.44
4687
132.74
5000
141.60
1875
53.10
2000
56.64
33.4
126.43
35.7
135.14
535.1
49.71
535.1
49.71
100.5
2.85
100.5
2.85
46.6
415.82
49.7
443.48
937.4
105.13
1000
112.15
360
10.20
384
10.87
1796.6
50.88
1916.6
54.28
1680.6
512.23
1792.8
546.43
3
2.24
3
2.24
200/230/460-3-60
200/230/460-3-60
3
2.24
3
2.24
200/230/460-3-60
200/230/460-3-60
1.5
1.12
1.5
1.12
200/230/460-3-60
200/230/460-3-60
2 - 10
2 - 7.46
2 - 10
2 - 7.46
200/230/460-3-60
200/230/460-3-60
28
28

SDF-AF-400/1000
4000
1010.10
100000
2832.00
37
20.56
5000
141.60
2000
56.64
35.7
135.14
535.1
49.71
100.5
2.85
49.7
443.48
1000
112.15
384
10.87
1916.6
54.28
1792.8
546.43
3
2.24
200/230/460-3-60
3
2.24
200/230/460-3-60
1.5
1.12
200/230/460-3-60
2 - 10
2 - 7.46
200/230/460-3-60
28

Information contained herein is provided for general information purposes only, not to be relied upon for final
fabrication or arrangement configuration.
Federal, state, local and provincial Jurisdictions Having Authority (JHA) may mandate certain requirements and/or
clearances not incoporated herein.
All dimensions and weights are approximate, subject to change without notice, and typographical error.
AESYS reserves the right, without limitation, to change information contained herein due to product revisions,
manufacturing processes, component technology and/or project specification.

Series SDF-AF: 3,750 to 4,000 MBH (946 to 1,010 Mcal/hr)


S8

S7
Q

S6

S5

A
E

RA INLET DRAW-THROUGH
DX COILS (OPTION)

R3

SA OA PLENUM
(OPTION)

R4

R2

R1

RA INLET AND SA
DISCHARGE ORIENTATION
E + 4-1/8"

RA INLET PERIMETER
FILTER RACKS
(OPTION)
Nominal Dimensions
Description
Lengths

A
Casing Overall
B
Induced Draft Fan
C
Forced Draft Burner
D
Turbulator Pull
Widths

E
Casing Overall
Heights

F
Casing Overall
G
RA Inlet Plenum
H
Axial Fan Section
J
Duct Furnace Section
K
SA Discharge Plenum
L
Extended Plenum (4)
M
SA OA Plenum (4)
Connections
N
Induced Draft Fan
P
Q

Min Flue Gas


Breeching

R
S
T

Natural Gas / LPG


Gas Pressure Required
(Min-Max)
CS Light Oil Pump
Condensate Drain
OA Inlet ID (7) (8)

Q (6)

Shipment

Units
US-IP

inch
inch
inch
inch

inch

inch
inch
inch
inch
inch
ft
inch

inch

SI

cm
cm
cm
cm

cm

cm
cm
cm
cm
cm
m
cm

cm

SDF-AF-375/850

160
406.40
21.75
55.25
36
91.44
54
137.16

78
198.12

218.125
554.04
50
127.00
40
101.60
78.125
198.44
50
127.00
24

9.5 x 13

60.96

24.13 x 34.29

A + 4-1/8"

EXTENDED PLENUM
(OPTION)

Physical Dimensions
SDF-AF-375/1000
SDF-AF-400/850

160
406.40
160
406.40
21.75
55.25
21.75
55.25
36
91.44
36
91.44
54
137.16
54
137.16

78
198.12
78
198.12

218.125
554.04
218.125
554.04
50
127.00
50
127.00
40
101.60
40
101.60
78.125
198.44
78.125
198.44
50
127.00
50
127.00
Maximum (2) 10 (3m) Extended Plenum Sections
24
60.96
24
60.96

9.5 x 13
24.13 x 34.29
9.5 x 13
24.13 x 34.29

SDF-AF-400/1000

160
406.40
21.75
55.25
36
91.44
54
137.16

78
198.12

218.125
554.04
50
127.00
40
101.60
78.125
198.44
50
127.00
24

9.5 x 13

60.96

24.13 x 34.29

inch

cm

14

35.56

14

35.56

14

35.56

14

35.56

NPS

DN

2.5

65

2.5

65

2.5

65

2.5

65

wc

cm wc

8 - 27

20.32 - 68.58

8 - 27

20.32 - 68.58

9 - 27

22.86 - 68.58

9 - 27

22.86 - 68.58

QTY - NPS
QTY - NPS
inch

QTY - DN
QTY - DN
cm

2 - 0.25
2 - .5
33.5 x 156

2-8
2 - 15
85.09 x 396.24

2 - 0.25
2 - .5
33.5 x 156

2-8
2 - 15
85.09 x 396.24

2 - 0.25
2 - .5
33.5 x 156

2-8
2 - 15
85.09 x 396.24

2 - 0.25
2 - .5
33.5 x 156

2-8
2 - 15
85.09 x 396.24

RA Inlet Damper (9)

inch

cm

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

66 x 136

167.64 x
345.44

Ship Weight

Lbs

Kg

10600

4808.08

10800

4898.80

10600

4808.08

10800

4898.80

Disassembled
Sectional Shipment

QTY

13

Series SDF-AF Guidelines


When considering Jackson & Church HVAC Global Series SDF-AF packaged indirect fired axial flow forced air turnover systems, the
following guidelines should be employed.
First, determine the industrial or commercial space CF (m) volume, which shall be tempered and must be ascertained. This volume
should be NET of stored inventory, machinery and confined or segregated space. Secondly, a design professional must determine
the heat loss of the building structure to ascertain MBH (Mcal/hr) requirement.
As a general rule, typical industrial or commercial spaces shall require between 1 to 3 BTU/CF (9 to 27 Kcal/m). For heating only
applications, typically 2 to 3 air changes per hour is utilized. For cooling applications, typically 3 to 4 air changes per hour is utilized.

I. When determining required standard air delivery rate at 70F (21C) CFM (m/min), based on NET building volume and
desired air changes per hour, the following formula is utilized:

US-IP

SI

Net CF Volume x Air Change / Hr


60 Minutes / Hr

Net m3 Volume x Air Change / Hr


60 Minutes / Hr

SCFM =

Sm3/min =

II. When determining standard air delivery rate at 70F (21C) CFM (m/min), based on BTUH (Kcal/hr) output requirement and
desired temperature rise, the following formula is utilized:

US-IP

SI

BTUH Output
TR F x 1.08

Kcal / Hr. Output


TR C x 18

SCFM =

Sm3/min =

In order to eliminate the thermal air barrier stratification effect in large volume spaces, discharge air temperature from
Series SDF-AF should not exceed 120 (48C). Discharge air temperature is generally equivalent to the sum of desired space
temperature and temperature rise capability of the Series SDF-AF.
III. When determining available Series SDF-AF temperature rise capability, the following formula is utilized:

US-IP

SI

BTUH Output
CFM x 1.08

Kcal / Hr Output
m3 / min x 18

Temperature Rise F =

Temperature Rise C =

IV. When determining CF (m3) combustion air requirements, for fuel burning equipment, local jurisdictional mandates shall be
followed. In absence of such requirements, determination can be based on the following:

US-IP

SI

12 CF x 1000 BTUH Input


60 Minutes / Hr

.3398 m3 x Kcal / Hr Input


60 Minutes / Hr

SCFM =

14

Sm3/min =

Series SDF-AF Selector


The table below represents the CFM (m3/min) delivery rate selection of Series SDF-AF.
Simply determine the space net volume and desired air changes per hour, then select the applicable SDF-AF model. As outlined in
formula I on page 14, model selection can be ascertained.
To further refine the selection process, based on a design professionals determination of MBH (Mcal/hr) output requirement, employ
formula II on page 14. This result will yield the SCFM (Sm/min) requirement.
Once determined in this manner, make the applicable model selection and then ascertain the net volume capability, based on the
desired air changes per hour.

Standard Air at 70F (21C) CFM (m/min) - Air Changes, per Hour
2

2.5

Series SDF-AF
Model

3.5

NET Industrial / Commercial Space Volume

SCFM (Sm3/min)

CF

CF

CF

CF

CF

SDF-AF-45/75

7,500 (212.4)

225,000

6,372

180,000

5,098

150,000

4,248

128,500

3,639

112,500

3,186

SDF-AF-50/75

7,500 (212.4)

225,000

6,372

180,000

5,098

150,000

4,248

128,500

3,639

112,500

3,186

SDF-AF-60/125

12,500 (354)

375,000

10,620

300,000

8,496

250,000

7,080

214,200

6,066

187,500

5,310

SDF-AF-75/125

12,500 (354)

375,000

10,620

300,000

8,496

250,000

7,080

214,200

6,066

187,500

5,310

SDF-AF-85/170

17,000 (481.44)

510,000

14,443

408,000

11,555

340,000

9,629

291,400

8,252

255,000

7,222

SDF-AF-100/170

17,000 (481.44)

510,000

14,443

408,000

11,555

340,000

9,629

291,400

8,252

255,000

7,222

750,000

21,240

600,000

16,992

500,000

14,160

428,500

12,135

375,000

10,620

SDF-AF-125/250

25,000 (708)

SDF-AF-150/250

25,000 (708)

750,000

21,240

600,000

16,992

500,000

14,160

428,500

12,135

375,000

10,620

SDF-AF-175/340

34,000 (962.88)

1,020,000

28,886

816,000

23,109

680,000

19,258

582,800

16,505

510,000

14,443

SDF-AF-175/400

40,000 (1,132.8)

1,200,000

33,984

960,000

27,187

800,000

22,656

685,700

19,419

600,000

16,992

SDF-AF-200/340

34,000 (962.88)

1,020,000

28,886

816,000

23,109

680,000

19,258

582,800

16,505

510,000

14,443

SDF-AF-200/400

40,000 (1,132.8)

1,200,000

33,984

960,000

27,187

800,000

22,656

685,700

19,419

600,000

16,992

SDF-AF-225/500

50,000 (1416)

1,500,000

42,480

1,200,000

33,984

1,000,000

28,320

857,000

24,270

750,000

21,240

SDF-AF-225/600

60,000 (1,699.2)

1,800,000

50,976

1,440,000

40,781

1,200,000

33,984

1,028,500

29,127

900,000

25,488

SDF-AF-250/500

50,000 (1,416)

1,500,000

42,480

1,200,000

33,984

1,000,000

28,320

857,000

24,270

750,000

21,240

SDF-AF-250/600

60,000 (1,699.2)

1,800,000

50,976

1,440,000

40,781

1,200,000

33,984

1,028,500

29,127

900,000

25,488

SDF-AF-275/600

60,000 (1,699.2)

1,800,000

50,976

1,440,000

40,781

1,200,000

33,984

1,028,500

29,127

900,000

25,488

SDF-AF-300/600

60,000 (1,699.2)

1,800,000

50,976

1,440,000

40,781

1,200,000

33,984

1,028,500

29,127

900,000

25,488

85,000 (2,407.2)

2,550,000

72,216

2,040,000

57,773

1,700,000

48,144

1,457,000

41,262

1,275,000

36,108

SDF-AF-300/1000

100,000 (2,832)

3,000,000

84,960

2,400,000

67,968

2,000,000

56,640

1,714,200

48,546

1,500,000

42,480

SDF-AF-325/850

85,000 (2,407.2)

2,550,000

72,216

2,040,000

57,773

1,700,000

48,144

1,457,000

41,262

1,275,000

36,108

SDF-AF-325/1000

100,000 (2,832)

3,000,000

84,960

2,400,000

67,968

2,000,000

56,640

1,714,200

48,546

1,500,000

42,480

SDF-AF-350/850

85,000 (2,407.2)

2,550,000

72,216

2,040,000

57,773

1,700,000

48,144

1,457,000

41,262

1,275,000

36,108

SDF-AF-350/1000

100,000 (2,832)

3,000,000

84,960

2,400,000

67,968

2,000,000

56,640

1,714,200

48,546

1,500,000

42,480

85,000 (2,407.2)

2,550,000

72,216

2,040,000

57,773

1,700,000

48,144

1,457,000

41,262

1,275,000

36,108

SDF-AF-375/1000

100,000 (2,832)

3,000,000

84,960

2,400,000

67,968

2,000,000

56,640

1,714,200

48,546

1,500,000

42,480

SDF-AF-400/850

85,000 (2,407.2)

2,550,000

72,216

2,040,000

57,773

1,700,000

48,144

1,457,000

41,262

1,275,000

36,108

SDF-AF-400/1000

100,000 (2,832)

3,000,000

84,960

2,400,000

67,968

2,000,000

56,640

1,714,200

48,546

1,500,000

42,480

SDF-AF-300/850

SDF-AF-375/850

15

Committed to delivering the highest level of product


quality, customer service and satisfaction.
AESYS Technologies, LLC serves North American and International markets with Jackson & Church HVAC
Global heating, ventilating and air conditioning equipment. The company also offers York-Shipley Global
packaged firetube boiler assemblies, ancillary boiler room equipment and pressure vessel products along with
Custom Fabrication capabilities and Educational Services comprising boiler training programs.
Jackson & Church HVAC Global and York-Shipley Global product brands are recognized for high performance,
dependability and utmost quality, providing for long life-cycle service in industrial, commercial and institutional
facilities worldwide.
AESYS strength resides in its commitment and ability to deliver the highest level of product quality, customer
service and satisfaction through its product brand offerings and extensive worldwide network of sales, service
and regional management representatives.
Corporate headquarters and primary manufacturing facility is strategically located in South Central Pennsylvania,
USA - at the crossroads of major highways, rail transportation systems and international shipping ports.
Visit AESYS at aesystech.com for more information.

Jackson & Church HVAC Global


Division of AESYS Technologies, LLC
693 North Hills Road
York, PA 17402-2211 USA
Tel: (+1) 717-755-1081
Fax: (+1) 717-755-0020
Email: jchvac-inquiries@aesystech.com
jchvacglobal.com
2012 AESYS Technologies, LLC

JCG-SDFAF-GNRLDATA-0112-R03

You might also like