You are on page 1of 3

Security printing is the field of the printing industry that deals with the printing of items such as

banknotes, passports, tamper-evident labels, stock certificates, postage stamps and identity cards.
The main goal of security printing is to prevent forgery, tampering, or counterfeiting.

A number of technical methods are used in the security printing industry.

Special paper
Most banknotes are made of heavy paper, almost always from cotton fibres for strength and
durability, in some cases linen or speciality coloured or forensic fibres are added to give the
paper added individuality and protect against counterfeiting. Some countries including Romania,
Mexico, New Zealand, Israel, Singapore and Australia produce banknotes made from polymer,
in order to improve wear and tear, and permit the inclusion of a small transparent window a few
millimeters in size as a security feature that is very difficult to reproduce using common
counterfeiting techniques.

[edit] Watermarks
A watermark is a recognizable image or pattern in paper that appears lighter or darker than
surrounding paper when viewed with a light from behind the paper, due to paper density
variations. A watermark is made by impressing a water coated metal stamp or dandy roll onto the
paper during manufacturing. Watermarks were first introduced in Bologna, Italy in 1282; as well
as their use in security printing, they have also been used by papermakers to identify their
product.

[edit] Intaglio printing


Intaglio is a printing technique in which the image is incised into a surface. Normally, copper or
zinc plates are used, and the incisions are created by etching or engraving the image, but one
may also use mezzotint. In printing, the surface is covered in ink, and then rubbed vigorously
with tarlatan cloth or newspaper to remove the ink from the surface, leaving it in the incisions. A
damp piece of paper is placed on top, and the plate and paper are run through a printing press
that, through pressure, transfers the ink to the paper.

The very sharp printing obtained from the intaglio process is hard to imitate by other means.
Intaglio also allows for the creation of latent images which are only visible when the document
is viewed at a very shallow angle.

[edit] Geometric lathe work


A guilloché is an ornamental pattern formed of two or more curved bands that interlace to repeat
a circular design. They are made with a geometric lathe.

[edit] Microprinting
This involves the use of extremely small text, and is most often used on currency and bank
checks. The text is generally small enough to be undiscernable to the naked eye. Cheques, for
example, use microprint as the signature line.

[edit] Color-changing inks


Color changing inks are chemicals that change color when viewed at a different angle. The color
of the ink does not actually change, but the angle of the light to the viewer's eye changes and
thus creates the change in color. Currently there are only three types, green to purple, gold to
green and green to lilac.

[edit] Holograms
A hologram may be embedded either via holographic paper, or onto the laminate of a card itself.

[edit] Security threads


There are two kinds of security threads. One is a thin aluminum coated and partly demetalized
Polyester film thread with Micro printing which is embedded in the security paper as banknote
or passport paper.

The other kind of security thread is the single or multicolor sewing thread made from cotton or
synthetic fibers, mostly UV fluorescent, for the bookbinding of passport booklets.

[edit] Magnetic ink


Because of the difficulties in forging magnetic ink characters, and the speed with which they can
be read by computer systems, magnetic ink character recognition is used extensively in banking,
primarily for personal checks. The ink used in Magnetic ink character recognition (MICR)
technology is also used to greatly reduce errors in automated (or computerized) reading.

[edit] Serial numbers


Serial numbers are not difficult to forge, but make legitimate documents easier to track and audit.

[edit] Anti-copying marks


In the late twentieth century advances in computer and photocopy technology made it possible
for people without sophisticated training to easily copy currency. In an attempt to prevent this,
banks have sought to add filtering features to the software and hardware available to the public
that senses features of currency, and then locks out the reproduction of any material with these
marks. One known example of such a system is the EURion constellation.

[edit] Copy-evident paper


Many secure documents have the feature which causes a photocopy of the document to appear
obviously different from the original. For example, when photocopied, most cheques will display
the word "VOID" (or the equivalent in another language) on the copy, even though it is absent
from the original.

[edit] Fluorescent dyes


Dyes which fluoresce under ultraviolet light or other unusual lighting. These show up as words,
patterns or pictures and may be visible or invisible under normal lighting. This feature is also
incorporated into many banknotes and other documents - eg Northern Ireland NHS prescriptions
show a picture of local '8th wonder' the Giant's Causeway in UV light. Some producers include
multi-frequency fluorescence, such that different elements fluoresce under specific frequencies
of light.

[edit] Registration of features on both sides


Banknotes are typically printed with fine alignment between the printing on each side of the
note. This allows the note to be examined for this feature, and provides opportunities to
unambiguously align other features of the note to the printing. Again, this is difficult to imitate
accurately enough in most print shops.

[edit] Electronic devices


With the advent of RFID, it is possible to insert extremely small RF-active devices into the
printed product. A documented example is the "Breeze" [1] electronic card system used to
control fare collection for MARTA in Atlanta.

[edit] Thermochromatic ink


Security ink with a normal "trigger" temperature of 88 degrees F, which will either disappear or
change colors when the ink is rubbed, usually by the fingertips.

You might also like