Professional Documents
Culture Documents
2013
Existing System:
In the earlier, CAN bus is used for effective wired communication. And Bluetooth is used for effective short range communication. But there is no such a system has been implemented to combine both wired as well as wireless technology to create a highly reliable system. So an effective system is proposed.
Proposed System:
In the proposed system, multi CAN controllers and Bluetooth nodes are implemented. The sensors are connected to the PIC microcontroller. The sensor values are sending to the master node for processing through CAN controller. The master receives the value and process the data; depending on the data it sends the value to the PC through Bluetooth. These values are updated in the PC for later verification. If anything is going abnormal, the user can control the devices in the other end by sending the data from the PC itself. The data path are from PC to Bluetooth, Bluetooth to Bluetooth, Bluetooth to CAN through PIC, and CAN to PIC, then the
skesystems@gmail.com
Vijayawada
Hyderabad
Page 1
2013
devices are controlled. The sensor values are also displayed in the LCD too. By this way we can achieve combined wires/wireless data communication.
skesystems@gmail.com
Vijayawada
Hyderabad
Page 2
2013
Temperature Sensor
Gas Sensor
LDR Sensor
Humidity Sensor
PIC16F877A
PIC16F877A
CAN Controller
Relay
Relay
CAN Controller
DC Motor
Exhaust Fan
CANL
Power Supply
CAN Transceiver
CAN Controller
PIC16F877A
Bluetooth
PIC16F877A LCD
skesystems@gmail.com
Vijayawada
Hyderabad
Page 3
2013
Receiving Section:
Power Supply
Bluetooth
PC
Hardware Requirements:
PIC 16F877A Microcontroller unit Bluetooth Module CAN Controller, Transceiver Temperature, Gas, Humidity, LDR sensor. LCD
Software Requirements:
Embedded C MP Lab or CCS Compiler
Advantages:
skesystems@gmail.com
Vijayawada
Hyderabad
Page 4
2013
skesystems@gmail.com
Vijayawada
Hyderabad
Page 5