You are on page 1of 21

Stellaris Family

Product Selector Guide


Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S)
P P P P P P P P P P P P P P P P P P

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

External Voltage Reference Internal Temp Sensor Analog/Digital Comparators

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature


I/E I/E I I/E I/E I I I/E I I/E I/E I I I I/E I I/E I

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S101 LM3S102 LM3S300 LM3S301 LM3S308 LM3S310 LM3S315 LM3S316 LM3S317 LM3S328 LM3S600 LM3S601 LM3S608 LM3S610 LM3S611 LM3S612 LM3S613 LM3S615

8 8 16 16 16 16 16 16 16 16 32 32 32 32 32 32 32 32

2 2 4 2 4 4 4 4 4 4 8 8 8 8 8 8 8 8

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

20 20 25 20 25 25 25 25 25 25 50 50 50 50 50 50 50 50

2 2 3 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1

2 6 2 4 6 6 6 6 2 4 6

1 2 6 2 6 6 6 6 6 6 6 6 6 6 6 6 6 6

1 1 2 1 2 2 2 2 1 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2/0 18 1/0 18 3/0 36

48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP

1 10 1 10

3 250K 2/0 33 8 500K 1/0 28 3/0 36

1 1 1 1

1 10 1 10 1 10 1 10

4 250K 1/0 32 4 250K 1/0 32 6 250K 1/0 30 8 500K 0/0 28 3/0 36 3/0 36

1 10 1 10 1 10 1 10 1 10 1 10

8 500K 1/0 28 2 500K 0/0 34 4 500K 0/0 32 2 500K 1/0 34 4 500K 1/0 32 2 500K 3/0 34

1 1 1 1 1

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S)
P P P P P P P P P P P P

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

External Voltage Reference Internal Temp Sensor Analog/Digital Comparators

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature


I/E I/E I I/E I/E I I I I I I/E I I I

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S617 LM3S618 LM3S628 LM3S800 LM3S801 LM3S808 LM3S811 LM3S812 LM3S815 LM3S817 LM3S818 LM3S828 LM3S1110 LM3S1133 LM3S1138 LM3S1150

32 32 32 64 64 64 64 64 64 64 64 64 64 64 64 64

8 8 8 8 8 8 8 8 8 8 8 8 16 16 16 16

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50 50 50 50 50 50 50 50 50 50 50 50 25 50 50 50

3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1

6 6 6 6 2 6 6 6 2 6

1 1

6 4 4 6 6 6 6 6 6 6 4 6 2 8 6 6

1 1 1 1

2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3

1 1 1 1 1 1 1 1 1 2 1

1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2

1 10 1 10 1 10

6 500K 1/0 30 6 500K 1/0 30 8 1M 0/0 28 3/0 36 3/0 36

48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP 48QFP

1 10 1 10 1 10 1 10 1 10 1 10 1 10

8 500K 1/0 28 4 500K 1/0 32 2 250K 1/0 34 2 500K 3/0 34 6 6 8 1M 1M 1M 1/0 30 1/0 30 0/0 28

1 1 1 1 1

2/0 41

100LQFP I P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

1 10 1 10

2 250K 1/0 44 8 1M

3/0 46 I/E 3/0 52

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S1162 LM3S1165 LM3S1332 LM3S1435 LM3S1439 LM3S1512 LM3S1538 LM3S1601 LM3S1607 LM3S1608 LM3S1620

64 64 96 96 96 96 96

16 16 16 32 32 64 64

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50 50 50 50 50 25 50 50 50 50 25

4 4 4 3 3 4 4 4 4 4 3

1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1

6 6 2 6 6

1 1

6 8 8 4 6 8 8 8 6 8 4

1 1 1 1

3 3 2 2 2 3 3 3 3 2 2

1 1 1 1 2 2 2 2 2 1

2 2 1 1 2 2 2 2 1 2 2

1 10 1 10 1 10 1 10 1 10 1 10 1 10

2 500K 3/0 46 I/E 4 500K 1/0 43 3 250K 3/0 57 2 500K 1/0 46 4 500K 1/0 52 2 250K 3/0 58 8 500K 0/0 43 2/0 60

100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P

1 1

128 32 128 32 128 32 128 32

1 10 1 10

8 500K 0/0 33 8 500K 2/0 52 3/0 52

100LQFP I P 108BGA 100LQFP P 108BGA

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S1621 LM3S1625 LM3S1626 LM3S1627 LM3S1635 LM3S1637 LM3S1651 LM3S1751 LM3S1776 LM3S1811 LM3S1816 LM3S1850 LM3S1911

128 32 128 32 128 32 128 32 128 32 128 32 128 32 128 64 128 64 256 32 256 32 256 32 256 64

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

80 50 50 50 50 50

4 4 4 4 4 4 4 3 3 4 4 3 4

2 1 1 1 1 1 2 1 1 2 2 1 1

1 1 1 1 1 1 1 1 1

4 4 6 6 6 6 4 8 6

8 4 4 4 8 6 8 6 2 8 8 6 8

1 1 1 2

3 2 1 2 2 3 3 2 1 1 2 1

2 1 1 1 2 1 2 2 1 2 2 1 2

1 10 1 10 1 10 1 10 1 10 1 10

1M

2/8 67

100LQFP P 108BGA 64LQFP P 64LQFP P 64LQFP P

1 1 1 1 1 4 1 3

6 500K 1/0 33 6 500K 0/0 33 4 500K 0/0 33

4 500K 2/0 56 4 1M 1M 1/0 43 2/16 67

100LQFP I P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P

80 50 50

3 2 3 1 1 1

2 10 16 1 10 1 10 1 10 1 10

4 500K 1/0 56 6 8 8 1M 1M 1M 0/0 33 2/8 67 2/8 33 3/0 56 2/0 60

50 50 50 50

3 2 3 2 3 2 1 2

100LQFP I P 108BGA 64LQFP P

100LQFP I P 108BGA 100LQFP P 108BGA

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S1918 LM3S1937 LM3S1958 LM3S1960 LM3S1968 LM3S1B21 LM3S1C21 LM3S1C26 LM3S1D21 LM3S1D26 LM3S1F11 LM3S1F16

256 64 256 64 256 64 256 64 256 64 256 96 512 64 512 64 512 96 512 96 384 48 384 48

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50 50 50 50 50

4 3 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 2 2 2 2 2 2 2

1 1 1

6 6 6

8 4 8 8 4 8 8 8 8 8 8 8

2 2

2 2 3 3 3

2 1 2 2 2

2 1 2 2 2 2 2 2 2 2 2 2

1 10 1 10 1 10

8 500K 2/0 52 I/E 4 8 8 8 8 8 8 8 8 8 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1/0 56 0/0 52 3/0 60

100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P

1 1

1 10 1 10 1 12 1 12 1 12 1 12 1 12 1 12

3/0 52 2/8 67 2/8 67 2/8 33 2/8 67 2/8 33 2/8 67 2/8 33

80 80 80 80 80 80 80

3 2 3 2 3 2

3 2 3 2

100LQFP I P 108BGA 64LQFP P 100LQFP P 108BGA 64LQFP P

3 2 3 2

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S1G21 LM3S1H11 LM3S1H16 LM3S1J11 LM3S1J16 LM3S1N11 LM3S1N16 LM3S1P51 LM3S1R21 LM3S1R26 LM3S1W16 LM3S1Z16 LM3S2110

384 64 512 48 512 48 128 20 128 20 64 64 64 12 12 24

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

80 80 80 50 50 50 50 80 80 80 50 50 25

4 4 4 3 3 3 3 4 4 4 3 3 3

2 2 2 2 2 2 2 2 2 2 2 2 1

1 1

6 2

8 8 8 6 6 6 6 8 8 8 6 6 4

3 2 3 2 3 2

2 2 2 2 2 2 2 2 2 2 2 2 1

1 12 1 12 1 12 1 10 1 10 1 10 1 10

8 8 8 8 8 8 8

1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M

2/8 67 2/8 67 2/8 33 2/8 67 2/8 33 2/8 67 2/8 33 2/16 67 2/8 67 2/8 33 2/8 33 2/8 33 3/0 40

100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P

3 2 3 2

100LQFP I P 108BGA 64LQFP P

3 2 3 2

100LQFP I P 108BGA 64LQFP P

3 2 3 2 3 3 3 1 2 2 2 1

2 10 16 1 10 1 10 1 10 1 10 8 8 8 8

100LQFP I P 108BGA 100LQFP P 108BGA 64LQFP P 64LQFP P 64LQFP P

256 48 256 48 32 16 64 8 6 16

100LQFP I/E P 108BGA

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S2139 LM3S2276 LM3S2410 LM3S2412 LM3S2432 LM3S2533 LM3S2601 LM3S2608 LM3S2616 LM3S2620 LM3S2637 LM3S2651

64 64 96 96 96 96

16 32 32 32 32 64

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

25 50 25 25 50 50 50 50 50 25 50 50

3 3 3 3 3 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1

8 2 2 6 6 4 4

6 1 4 4 4 6 8 8 6 6 6

1 1

1 1 1 1 1 1 1 1 1 2 1 1

2 1 1 2 2 2 3 2 1 1 2 3

1 1 1 1 1 2 2 1 1 1 1

1 1 1 1 1 1 2 2 1 1 2

1 10 1 10

4 250K 3/0 56 6 1M

100LQFP P 108BGA 64LQFP P

0/0 33 2/0 60

100LQFP I P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P

1 1 1

1 10 1 10 1 10

3 250K 2/0 49 3 250K 2/0 34

3 250K 3/0 48 2/0 60

128 32 128 32 128 16 128 32 128 32 128 32

1 10 1 10

8 500K 2/0 52 6 1M 2/0 33

1 1

1 1 1

100LQFP 3/0 52 I/E P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

1 10 1 10

4 500K 3/0 46 4 500K 1/0 53

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S2671 LM3S2678 LM3S2730 LM3S2739 LM3S2776 LM3S2793 LM3S2911 LM3S2918 LM3S2939 LM3S2948 LM3S2950 LM3S2965

128 32 128 32 128 64 128 64 128 64 128 64 256 64 256 64 256 64 256 64 256 64 256 64

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50 50 50 50 50

4 4 3 3 3 4 4 4 3 4 4 4

1 1 1 1 1 2 1 1 1 1 1 1

1 1 1 1 1 1 1 1

2 4 6 8 8 4 6 6

1 2

2 2 4 6 1 8 8 8 4 8 6 6

1 1

1 1 1 1 1 2 1 1 1 2 2 2

1 1 1 2 1

1 1 1

1 1 1 1 1 2 2 2 1 2 2 2

1 10 1 10

4 500K 3/0 33 8 500K 0/0 33 2/0 60

64LQFP P 64LQFP P

100LQFP I P 108BGA 100LQFP P 108BGA 64LQFP P

1 3 4

1 10 1 10

4 500K 1/0 56 6 1M 1M 0/0 33 3/16 67 2/0 60

80 50 50 50 50 50 50

2 1 1 2

3 2 3 2 3 3 3 3 2 2 1 1 1 2

2 10 16

100LQFP I P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

1 10 1 10 1 10

8 500K 2/0 52 3 500K 3/0 57 8 4 1M 1M

3/0 52 I/E 3/0 60

1 1

1 10

3/0 56 I/E

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S2B93 LM3S2D93 LM3S2U93 LM3S3634 LM3S3651 LM3S3654 LM3S3739 LM3S3748 LM3S3749 LM3S3826 LM3S3J26 LM3S3N26 LM3S3W26 LM3S3Z26 LM3S5632 LM3S5651

256 96 512 96 384 96 128 32 128 32 128 48 128 64 128 64 128 64 256 32 128 20 64 32 16 12 8 6

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

80 80 80 50 50

4 4 4 3 4 4 4 4 4 3 3 3 3 3 3 4

2 2 2 1 1 2 1 1 1 2 2 2 2 2 1 2

1 1 1 1 1 1

8 8 8 8 8 6

4 4 4

8 8 8 5 8 8 8 8 7 6 6 6 6 6 5 8

2 2 2 1 1 2

2 2 2

3 2 3 2 3 2 2 1 1 2 2 2 2 2 2 2 2 2

2 2 2 1 1 1 2 2 2 2 2 2 2 2 1 2

1 1 1 1

2 10 16 2 12 16 2 12 16 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10

1M 1M 1M

3/16 67 3/16 67 3/16 67

100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P 64LQFP P 64LQFP P

H 2 O 1 O 1 H 3 H 2 H 3 D 3 D 3 D 3 D 3 D 3 1 H 2

8 500K 0/0 33 4 500K 2/0 33 8 500K 2/8 33 8 500K 2/0 61 8 8 8 8 8 8 8 1M 1M 1M 1M 1M 1M 1M 2/0 61 2/0 61 2/8 33 2/8 33 2/8 33 2/8 33 2/8 33

50 50 50 50

I 100LQFP P I 100LQFP P I 100LQFP P 64LQFP P 64LQFP P 64LQFP P 64LQFP P 64LQFP P 64LQFP P

4 4

50 50 50 50 50 50

128 32 128 32

6 500K 0/0 33 1M 2/16 67

80

2 O 3 2

2 10 16

100LQFP I P 108BGA

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S5652 LM3S5656 LM3S5662 LM3S5732 LM3S5737 LM3S5739 LM3S5747 LM3S5749 LM3S5752 LM3S5762 LM3S5791 LM3S5951 LM3S5956 LM3S5B91 LM3S5C31 LM3S5C36

128 32 128 32 128 32 128 64 128 64 128 64 128 64 128 64 128 64 128 64 128 64 256 64 256 64 256 96 512 64 512 64

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50

3 4 3 3 3 4 3 4 3 3 4 4 4 4 3 4

1 2 1 1 1 1 1 1 1 1 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

6 6 6 8 6 8 6 6 8 6 8

6 8 5 5 3 8 2 5 6 5 8 8 8 8 6 8

1 1

1 O 1 1 O 3 1 O 1 1 H 2 1 H 1 1 H 3 1 H 1 2 H 2 1 O 1 1 O 1

1 2 2 2 2 1 2 1

1 2 1 1 2 2 1 2 1 1 2 2 2 2 2 2

1 1 1

1 10 2 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10 1 10

6 500K 1/0 33 8 1M 2/16 33

64LQFP P 64LQFP P 64LQFP P 64LQFP P

80 50 50 50 50 50 50 50 50

4 1

4 500K 0/0 33 6 500K 0/0 33 8 500K 0/0 61 8 500K 2/0 61 8 500K 0/0 61 8 1M 2/0 61

I 100LQFP P I 100LQFP P I 100LQFP P I 100LQFP P 64LQFP P 64LQFP P 100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P

1 4

6 500K 1/0 33 4 500K 0/0 33 1M 1M 1M 1M 1M 1M 3/16 72

1 4 4 4 4 4 4

80 80 80 80 80 80

2 2 1

2 O 3 2 2 O 3 2 1 O 3 2

2 10 16 2 10 16 2 10 8

2/16 67 2/16 33 3/16 72

2 2 1

2 O 3 2 1 D 3 2 1 D 3 2

2 10 16 2 12 16 2 12 8

100LQFP I P 108BGA 100LQFP P 108BGA 64LQFP P

2/16 67 2/16 33

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

10

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S5C51 LM3S5C56 LM3S5D51 LM3S5D56 LM3S5D91 LM3S5G31 LM3S5G36 LM3S5G51 LM3S5G56 LM3S5K31 LM3S5K36 LM3S5P31 LM3S5P36

512 64 512 64 512 96 512 96 512 96 384 64 384 64 384 64 384 64 128 24 128 24 64 64 24 24

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

80 80 80 80 80 80 80 80 80 80 80 80 80

4 4 4 4 4 3 4 4 4 3 3 3 3

2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1

6 6 6 6 8 6 8 6 6 6 6 6 6

4 4 4 4 4 4 4 4 4 4 4 4 4

8 8 8 8 8 6 8 8 8 6 6 6 6

2 1 2 1

2 O 3 2 1 O 3 2

2 2 2 2 2 2 2 2 2 2 2 2 2

1 1 1 1

2 12 16 2 12 8

1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M

2/16 67 2/16 33 2/16 67 2/16 33 3/16 72

100LQFP P 108BGA 64LQFP P

2 O 3 2 1 O 3 2

2 12 16 2 12 8

100LQFP I P 108BGA 64LQFP P

2 2 1 2 1 2 1 2 1

2 O 3 2 1 D 3 2 1 D 3 2

2 12 16 2 12 16 2 12 8

100LQFP I P 108BGA 100LQFP P 108BGA 64LQFP P

2/16 67 2/16 33 2/16 67 2/16 33 2/16 67 2/16 33 2/16 67 2/16 33

2 O 3 2 1 O 3 2

2 12 16 2 12 8

100LQFP I P 108BGA 64LQFP P

1 D 3 2 1 D 3 2

2 10 16 2 10 8

100LQFP I P 108BGA 64LQFP P

1 D 3 2 1 D 3 2

2 10 16 2 10 8

100LQFP I P 108BGA 64LQFP P

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

11

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S5P3B LM3S5P51 LM3S5P56 LM3S5R31 LM3S5R36 LM3S5T36 LM3S5U91 LM3S5Y36 LM3S6100 LM3S6110 LM3S6420 LM3S6422

64 64 64

24 24 24

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

80 80 80 80 80 80 80 80 25 25 25 25

3 4 4 4 4 3 4 3 3 3 3 3

2 2 2 2 2 2 2 2 1 1 1 1

1 1 1 1 1 1 1 1 1

6 6 6 8 8 6 8 6 2

4 4 4 4 4 4 4 4

6 8 8 8 8 6 8 6 4 4 4 4

2 2 1

1 D 3 2 2 O 3 2 1 O 3 2

2 2 2 2 2 2 2 2 1 1 1 1

1 1 1 1

2 10 16 2 10 16 2 10 8

1M 1M 1M 1M 1M 1M 1M 1M

2/16 67 2/16 67 2/16 33 2/16 67 2/16 33 2/16 33 3/16 72

100LQFP P 108BGA 100LQFP P 108BGA 64LQFP P

256 48 256 48 32 12

2 1 1

1 D 3 2 1 D 3 1 D 3 2 2

2 10 16 2 10 2 10 8 8

100LQFP I P 108BGA 64LQFP P 64LQFP P

384 96 16 64 64 96 96 8 16 16 32 32

2 1

2 O 3 2 1 D 3 1 1 1 1 2

2 12 16 2 10 8

100LQFP I P 108BGA 64LQFP P

2/16 33 1/0 30 3/0 35 2/0 46

100LQFP I P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

1 10

2 250K 2/0 34

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

12

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I/E I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S6432 LM3S6537 LM3S6610 LM3S6611 LM3S6618 LM3S6633 LM3S6637 LM3S6730 LM3S6753 LM3S6911 LM3S6918

96 96

32 64

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50 50 25 50 50 50 50 50 50 50 50

3 4 4 4 4 3 4 3 4 4 4

1 1 1 1 1 1 1 1 1 1 1

1 1 1 1

2 6 4 6

1 1 1

4 6 6 6 6 6 6 4 4 6 6

1 1

2 2 3 3 2 2 2 1 2 3 2

1 1 1 2 2 1 1 1 2 2

1 1 1 2 2 1 1 1 1 2 2

1 10 1 10

3 250K 2/0 43

100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

4 500K 2/0 41 3/0 46 2/0 46

128 32 128 32 128 32 128 32 128 32 128 64 128 64 256 64 256 64

1 10 1 10 1 10

8 500K 2/0 38 3 500K 1/0 41 4 1M 3/0 41 2/0 46

1 10

4 500K 2/0 41

2/0 46 I/E

1 10

8 500K 2/0 38 I/E

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

13

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S6938 LM3S6950 LM3S6952 LM3S6965 LM3S8530 LM3S8538 LM3S8630 LM3S8730 LM3S8733 LM3S8738 LM3S8930

256 64 256 64 256 64 256 64 96 96 64 64

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50 50 50 50 50 50 50 50 50 50 50

4 4 3 4 4 4 4 4 4 4 4

1 1 1 1 1 1 1 1 1 1 1

1 1 1

6 4 6

6 6 4 4 2 4 2 2 4 6 2

1 1 2

3 3 3 3 1 2 2 2 2 3 1

1 1 1 2 1 1 1 1 1 1 1

1 2 1 1 2 1 1 1 1 2 1

1 10

1M

3/0 38 3/0 46

100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

1 1 1

1 10 1 10

3 500K 3/0 43 4 8 1M 1M

2/0 42 I/E 0/0 35

1 1

1 10

3/0 36

128 32 128 64 128 64 128 64 256 64

0/0 31 0/0 32

1 1 1 2

1 10 1 10

4 500K 3/0 35 8 500K 1/0 38 0/0 34

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

14

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S8933 LM3S8938 LM3S8962 LM3S8970 LM3S8971 LM3S9781 LM3S9790 LM3S9792 LM3S9971 LM3S9997 LM3S9B81

256 64 256 64 256 64 256 64 256 64 128 64 128 64 128 64 256 64 256 64 256 96

M3 M3 M3 M3 M3 M3 M3 M3 M3 M3 M3

50 50 50 50 50

4 4 4 4 4 4 4 4 4 4 4

1 1 1 1 1 2 2 2 2 2 2

1 1 1 1 1

6 6 8 6 6

4 6 2 2 6 8 8 8 8 8 8

2 1

1 1 1 3 1

2 3 2 2 1

1 2 1 1

1 1 1 2 1 2 2 2 2 2 2

1 1 1 1 1 1

1 10 1 10 1 10

4 8

1M 1M

3/0 36

100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

3/0 38 I/E

4 500K 1/0 42 8 1M 1M 1M 1M 1M 1M 1M 0/0 46

1 10

1/0 38 3/16 65

80 80 80 80 80 80

2 2 2

3 O 3 2 2 O 3 2 2 O 3 2

2 10 16 2 10 16 2 10 16 2 10 16 2 10 16 2 10 16

3/16 60 3/16 65 2/16 72

4 4 4

2 O 3 2

2 O 3 2 3 O 3 2

2/16 60 3/16 65

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

15

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S9B90 LM3S9B92 LM3S9B95 LM3S9B96 LM3S9BN2 LM3S9BN5 LM3S9BN6 LM3S9C97 LM3S9D81 LM3S9D90 LM3S9D92

256 96 256 96 256 96 256 96 256 96 256 96 256 96 512 64 512 96 512 96 512 96

M3 M3 M3

80 80 80 80 80 80 80 80 80 80 80

4 4 4 4 4 4 4 4 4 4 4

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1

8 8 8 8 8 8 6 8

8 8 8 8 8 8 8 8 8 8 8

2 O 3 2 2 O 3 2

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

2 10 16 2 10 16 2 10 16 2 10 16 2 10 16 2 10 16 2 10 16 2 12 16 2 12 16 2 12 16 2 12 16

1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M

3/16 60 3/16 65 3/16 65 3/16 65 3/16 72 3/16 72 3/16 72

100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

4 4 4 4 4 4 4

2 2 O 3 2 2 2 O 3 2 2 2 O 3 2

M3 M3 M3

2 2 O 3 2 2 2 O 3 2 2 2 O 3 2 3 O 3 2 2 O 3 2

M3 M3 M3 M3 M3

2/16 60 3/16 65

3/16 60 3/16 65

2 2 O 3 2

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

16

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM3S9D96 LM3S9DN5 LM3S9DN6 LM3S9G97 LM3S9GN5 LM3S9L71 LM3S9L97 LM3S9U81 LM3S9U90 LM3S9U92 LM3S9U96

512 96 512 96 512 96 384 64 384 64 128 48 128 48 384 96 384 96 384 96 384 96

M3 M3

80 80 80 80 80 80 80 80 80 80 80

4 4 4 4 4 4 4 4 4 4 4

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1

8 8 8 6 8 6 6 8 8

4 4 4 4 4 4 4

8 8 8 8 8 8 8 8 8 8 8

2 2 O 3 2 2 2 O 3 2 2 2 O 3 2 2 2 O 3 2

2 2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1

2 12 16 2 12 16 2 12 16 2 12 16 2 12 16 2 10 16 2 10 16 2 12 16 2 12 16 2 12 16 2 12 16

1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M

3/16 65 3/16 72 3/16 72

100LQFP P 108BGA 100LQFP X 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA 100LQFP P 108BGA

M3 M3 M3 M3 M3 M3 M3 M3

2/16 60 3/16 72 2/16 72

2 2 O 3 2 2 2 2 O 3 2

2 O 3 2 3 O 3 2 2 O 3 2

2/16 60 3/16 65

3/16 60 3/16 65 3/16 65

4 4

2 2 O 3 2 2 2 O 3 2

M3

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

17

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM4F110B2QR LM4F110C4QR LM4F110E5QR LM4F110H5QR LM4F111B2QR LM4F111C4QR LM4F111E5QR LM4F111H5QR LM4F112C4QC LM4F112E5QC LM4F112H5QC LM4F112H5QD LM4F120B2QR LM4F120C4QR LM4F120E5QR LM4F120H5QR LM4F121B2QR LM4F121C4QR

32 64

12 24

2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2

24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12

1 1 1 1 1 1 1 1 1 1 1 1

8 4 8 4 8 4 8 4 8 6 8 6 8 6 8 6 8 6 8 6 8 6 8 6

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2 12 12 2 12 12 2 12 12 2 12 12 2 12 12 2 12 12 2 12 12 2 12 12 2 12 22 2 12 22 2 12 22 2 12 24 2 12 12 2 12 12 2 12 12 2 12 12 2 12 12 2 12 12

1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M

2/16 43 2/16 43 2/16 43 2/16 43 2/16 49 2/16 49 2/16 49 2/16 49

64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S

128 32 256 32 32 64 12 24

128 32 256 32 64 24

3/16 69 3/16 69 3/16 69 3/16 105 2/16 43 2/16 43 2/16 43 2/16 43 2/16 49 2/16 49

I 100LQFP S I 100LQFP S I 100LQFP S I 144LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S

128 32 256 32 256 32 32 64 12 24

1 D 8 4 1 D 8 4 1 D 8 4 1 D 8 4 1 D 8 6 1 D 8 6

128 32 256 32 32 64 12 24

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

18

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM4F121E5QR LM4F121H5QR LM4F122C4QC LM4F122E5QC LM4F122H5QC LM4F122H5QD LM4F130C4QR LM4F130E5QR LM4F130H5QR LM4F131C4QR LM4F131E5QR LM4F131H5QR LM4F132C4QC LM4F132E5QC LM4F132H5QC LM4F132H5QD LM4F210E5QR LM4F210H5QR

128 32 256 32 64 24

2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2

24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12 24 12

1 D 8 6 1 D 8 6 1 D 8 6 1 D 8 6 1 D 8 6 1 D 8 6 1 O 8 4 1 O 8 4 1 O 8 4 1 O 8 6 1 O 8 6 1 O 8 6 1 O 8 6 1 O 8 6 1 O 8 6 1 O 8 6 2 2 8 4 8 4

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

2 12 12 2 12 12 2 12 22 2 12 22 2 12 22 2 12 24 2 12 12 2 12 12 2 12 12 2 12 12 2 12 12 2 12 12 2 12 22 2 12 22 2 12 22 2 12 24 2 12 12 2 12 12

1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M

2/16 49 2/16 49

64LQFP S 64LQFP S

3/16 69 3/16 69 3/16 69 3/16 105 2/16 43 2/16 43 2/16 43 2/16 49 2/16 49 2/16 49

I 100LQFP S I 100LQFP S I 100LQFP S I 144LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S

128 32 256 32 256 32 64 24

128 32 256 32 64 24

128 32 256 32 64 24

3/16 69 3/16 69 3/16 69 3/16 105 2/16 43 2/16 43

I 100LQFP S I 100LQFP S I 100LQFP S I 144LQFP S 64LQFP S 64LQFP S

128 32 256 32 256 32 128 32 256 32

2 16 2 24 12 2 2 16 2 24 12 2

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

19

Stellaris Family
Product Selector Guide (Continued)
Memory Core Timers Motion Control Internal Precision Oscillator MPU SysTick (24-Bit) General-Purpose (Total) Serial Interfaces Ethernet UART Analog ADC Production (P) or Sampling (S) External Voltage Reference Internal Temp Sensor Analog/Digital Comparators Battery-Backed Hibernation LDO Voltage Regulator b Operating Temperature
I I I I I I I I
f

64-Bit Wide CCP QEI Channels External Peripheral Interface 10/100 MAC+PHY 10/100 MAC with MII Interface IEEE 1588 CAN MAC c USB D, H, or O UART e UART Modem Status I2C SSI/SPI I2S Units Resolution (10- or 12-bit)

ROM Software Libraries DMA SAFERTOS

64-Bit Wide Real-Time Clock (RTC) Watchdog PWM Units d PWM Outputs PWM Fault Dead-Band Generator CCP (Total)

Part Number CONFIGMEM (KB) CODESRAM (KB) EEPROM (bytes)

Speed (samples/sec)

ARM Cortex CPU

Max Speed (MHz)

SRAM (KB)

Flash (KB)

Channels

LM4F211E5QR LM4F211H5QR LM4F212E5QC LM4F212H5BB LM4F212H5QC LM4F212H5QD LM4F230E5QR LM4F230H5QR LM4F231E5QR LM4F231H5QR LM4F232E5QC LM4F232H5BB LM4F232H5QC LM4F232H5QD

128 32 256 32 128 32 256 32 256 32 256 32 128 32 256 32 128 32 256 32 128 32 256 32 256 32 256 32

2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2 2K M4F 80 12 6 2

2 16 6 24 12 2 2 16 6 24 12 2 2 16 8 24 12 2 2 16 8 24 12 2 2 16 8 24 12 2 2 16 8 24 12 2 2 16 2 24 12 2 2 16 2 24 12 2 2 16 6 24 12 2 2 16 6 24 12 2 2 16 8 24 12 2 2 16 8 24 12 2 2 16 8 24 12 2 2 16 8 24 12 2

2 2 2 2 2 2

8 6 8 6 8 6 8 6 8 6 8 6

4 4 4 4 4 4 4 4 4 4 4 4 4 4

2 12 12 2 12 12 2 12 22 2 12 24 2 12 22 2 12 24 2 12 12 2 12 12 2 12 12 2 12 12 2 12 22 2 12 24 2 12 22 2 12 24

1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M 1M

2/16 49 2/16 49

64LQFP S 64LQFP S

3/16 69 3/16 120 3/16 69 3/16 105 2/16 43 2/16 43 2/16 49 2/16 49

I 100LQFP S 157BGA S

I 100LQFP S I 144LQFP S 64LQFP S 64LQFP S 64LQFP S 64LQFP S

2 O 8 4 2 O 8 4 2 O 8 6 2 O 8 6 2 O 8 6 2 O 8 6 2 O 8 6 2 O 8 6

3/16 69 3/16 120 3/16 69 3/16 105

I 100LQFP S 157BGA S

I 100LQFP S I 144LQFP S

a. GPIOs are 5-V tolerant in input configuration. Number of GPIOs depends on the peripherals used. See the corresponding Stellaris microcontroller data sheet for details. b. Industrial (I) temperature is -40 to +85 C and Extended (E) temperature is -40 to +105 C. c. USB options for Stellaris microcontrollers include Device Only (D) capability, Host/Device (H) capability, and On-The-Go/Host/Device (O) capability. d. PWM motion-control functionality can be achieved through dedicated motion control hardware (these PWM output pins) or through the motion control features of the general-purpose timers (the CCP pins). See the Stellaris Data Sheet for details. e. 64-pin parts with UART Modem Status only include the RTS and CTS flow control signals. f. All devices with ADC also have an Internal Voltage Reference.

August 01, 2012

Package

GPIOs

20

Stellaris Family

Texas Instruments, Inc. 108 Wild Basin, Suite 350 Austin, TX 78746 http://www.ti.com/stellaris
Copyright 2006-2012 Texas Instruments, Inc.Texas Instruments Incorporated All rights reserved. Stellaris and StellarisWare are registered trademarks of Texas Instruments Incorporated. ARM and Thumb are registered trademarks and Cortex is a trademark of ARM Limited. Other names and brands may be claimed as the property of others. PSG-STELLARIS-11 / SPMC001

You might also like