You are on page 1of 138

Tariff Description ===========================================================================

8479.10 PIPELINE INSERTION MACHINES, which fragment underground pipes and insert replacement pipes in a simultaneous operation Op. 12.11.1984 Dec. 15.05.1985 - TC 8433747 ROAD SURFACING MACHINES, self-propelled, being ANY of the following: (a) laying and finishing machines; (b) compacting and finishing machines; (c) finishing machines Op. 02.11.1984 Dec. 01.04.1985 - TC 8433933 INSPECTION AND SEALING SYSTEMS, sewer, remote controlled, mounted in enclosed trailers or imported separately Op. 05.06.1984 Dec. 05.06.1984 - TC 8439128 CUTTING OR MILLING MACHINES, pavement, self-propelled Op. 23.07.1990 Dec. 16.10.1990 - TC 9007751 SPREADERS, CHIP, ROAD WORK, forward control, self propelled Op. 08.11.2010 Dec. 31.01.2011 - TC 1049414 SOIL MIXER-STABILISERS, hydraulic Op. 06.02.2009 Dec. 01.05.2009 - TC 0904149

8479.10

8479.10

8479.10 8479.10.00 8479.10.00 8479.10.00

PLANT, WASTEWATER TREATMENT, comprising ALL the following: (a) pumps; (b) tanks; (c) chemical distributors; (d) valves; (e) piping and/or fittings; (f) cranes and/or hoists; (g) thickener coagulation mixers and/or reactors; (h) thickener flocculation mixers and/or reactors; (i) slewing rings; (j) conveyors; (k) centrifuges; (l) cabling; (m) transmitters; (n) sensors; (o) switches; (p) electrical transformers; (q) polyelectrolyte batchers Op. 21.03.2006 Dec. 09.06.2006 - TC 0605457 COLLECTORS, LITTER, self propelled, pedestrian operated Op. 30.05.2006 Dec. 11.08.2006 - TC 0609331 SPREADERS, CHIP, ROAD MAKING, forward control, self propelled Op. 09.01.2008 Dec. 25.03.2008 - TC 0800381 TROWELS, CONCRETE, self-propelled, ride on, having ALL of the following features: (a) concrete retardent sprayer; (b) convertible non overlapping to overlapping blade configuration Op. 08.06.2001 Dec. 24.08.2001 - TC 0104715 LASERS, CONCRETE, SCREED, self-propelled with a self-levelling screed NOT less than 2 m long mounted on a telescopic boom NOT less than 5 m long Op. 28.02.2003 Dec. 23.05.2003 - TC 0302125 ROBOTICS, LABORATORY, MICRO ORGANISM PICKERS, having BOTH of the following:

8479.10.00 8479.10.00 8479.10.00

8479.10.00

8479.50.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(a) image analyser; (b) single picking head containing NOT less than 96 picking pins Op. 01.03.2006 Dec. 19.05.2006 - TC 0604625 8479.50.90 ROBOTICS, LABORATORY, MICRO ORGANISM PICKERS, having BOTH of the following: (a) image analyser; (b) single picking head containing NOT less than 96 picking pins Op. 01.03.2006 Dec. 19.05.2006 - TC 0604625 COOLERS, EVAPORATIVE, programmable logic controlled, comprising BOTH of the following: (a) primary panel filters NOT less than 50 mm thick; (b) cooling towers Op. 18.01.2007 Dec. 10.04.2007 - TC 0701043 COOLERS, EVAPORATIVE, GAS TURBINE INTAKE, having ALL of the following: (a) maximum air inlet temperature NOT greater than 50 degrees C; (b) maximum water evaporation rate NOT greater than 16.65 m3/h; (c) maximum water bleed rate NOT greater than 25 m3/h; (d) maximum pressure drop NOT greater than 2.0 mbar Op. 07.08.2008 Dec. 31.10.2008 - TC 0825491 COOLERS, EVAPORATIVE, having a water tank capacity NOT exceeding 10 litres Op. 11.10.2001 Dec. 21.12.2001 - TC 0109275 COOLERS, VEHICLE, EVAPORATIVE Op. 25.06.2004 Dec. 03.09.2004 - TC 0406331

8479.60.00

8479.60.00

8479.60.00

8479.60.00 8479.71.00

PASSENGER BOARDING BRIDGES, AEROPLANE, including ALL of the following: (a) control console; (b) auto-leveller; (c) electrical cabinets Op. 01.01.2012 Dec. 22.02.2012 - TC 1205270 MIXING MACHINES, laboratory, capacity NOT exceeding 25 L, mixing tool speed NOT exceeding 50 r/s Op. 12.06.1984 Dec. 12.06.1984 - TC 8439017 MILLS, colloid, having annular OR conical toothed rotor and stator, with product contact parts of stainless steel Op. 25.07.1985 Dec. 23.09.1986 - TC 8533353 ICE-CREAM MAKERS, domestic Op. 05.08.1985 Dec. 08.10.1985 - TC 8533710

8479.82

8479.82

8479.82 8479.82

MILLS, wet comminution, comprising a rotor and stator, capable of water displacement exceeding 1.6 m3/h Op. 22.07.1987 Dec. 14.10.1987 - TC 8734078 GRINDING MILLS, salt, being tableware Op. 08.12.1987 Dec. 08.12.1989 MILLS, grinding, pepper and salt mills, in sets Op. 16.06.1989 Dec. 08.12.1989 GRINDING MILLS, herb, being tableware Op. 22.08.1990 Dec. 21.02.1991 - TC 8801101 - TC 8904038 - TC 9007329

8479.82 8479.82 8479.82

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.82 SHAKERS, test sieve, electromagnetic, laboratory type, incorporating variable amplitude vibration control Op. 29.06.1992 Dec. 19.01.1993 - TC 9207458

8479.82.00

MIIXING STATIONS, gravimetric, having ALL of the following: (a) production module; (b) neckpiece; (c) sensors; (d) mixing insert; (e) hoppers; (f) hose connector Op. 01.03.2013 Dec. 08.07.2013 - TC 1307529
VACUUM PROCESSING PLANT, FOOD AND/OR COSMETICS AND/OR PHARMACEUTICALS, programmable logic controlled, including ALL of the following: (a) mixing vessel capacity NOT less than 1 000 litres and NOT greater than 5 000 litres; (b) homogeniser; (c) melting vessel; (d) supply control modules being ALL of the following: (i) pressure control module; (ii) pneumatic control module; (iii) temperature control module, (e) barrier and flushing fluid system; (f) clean in place system; (g) dry in place system Op. 10.12.2012 Dec. 13.03.2013 - TC 1247252 COMPACTORS, RADIOACTIVE WASTE, press force capacity NOT less than 5 000 kN and NOT greater than 20 000 kN, having electrical cabinets Op. 03.09.2012 Dec. 26.11.2012 - TC 1233096 GRINDING AND/OR PULVERISING MILL SYSTEM, unassembled, having ALL of the following: (a) rotary attrition mill; (b) rotary airlock valves; (c) blower; (d) ducting; (e) dust collector; (f) magnetic filter Op. 20.08.2012 Dec. 12.11.2012 - TC 1230813 ELUTRIATOR MODULES, having ALL of the following: (a) separation cyclone with rotary valve; (b) aerodynamic separator; (c) pneumatic transporter Op. 18.07.2012 Dec. 03.10.2012

8479.82.00

8479.82.00

8479.82.00

8479.82.00

- TC 1225573

8479.82.00

MACERATORS, programmable logic controlled, having ALL of the following: (a) a foot sensor; (b) rotating angled twin cutting blades; (c) NOT greater than 3 minute closed drum operating cycles; (d) NOT more than four disposable products per cycle Op. 19.07.2012 Dec. 10.10.2012 - TC 1225786

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.82.00 SCREENERS AND SEPARATORS, diesel powered, mobile, including ALL of the following: (a) feeder; (b) conveyors; (c) rotary drum Op. 05.04.2012 Dec. 25.06.2012 - TC 1211474 MIXER MACHINES, DRY AND LIQUID MATERIAL, programmable logic controlled, having ALL of the following: (a) hoppers; (b) dosing modules; (c) dry substance dosing output NOT less than 500 litres per hour and NOT greater than 4 680 litres per hour Op. 22.03.2012 Dec. 15.06.2012 - TC 1209515 MIXERS (BLENDERS), COFFEE BEAN, steel ribbon Op. 13.03.2012 Dec. 15.06.2012 - TC 1208277

8479.82.00

8479.82.00 8479.82.00

MIXERS, BATTERY ACID, continuous operation, programmable logic controlled, including ALL of the following: (a) density meters; (b) centrifugal pumps; (c) flow meters; (d) static mixers; (e) graphite plate heat exchangers; (f) distribution valves; (g) reclaim tanks; (h) internal tubes AND pipes; (i) stainless steel support stand Op. 23.12.2011 Dec. 14.03.2012 - TC 1142428 SETS, SALT SHAKER AND PEPPER GRINDING MILL, incorporating ceramic grinding mechanism Op. 11.01.2012 Dec. 12.04.2012 - TC 1201192 WASTE MATERIAL SCREENING MACHINES, including ALL of the following: (a) screens; (b) diesel engine; (c) hopper belt; (d) collection belt; (e) discharge conveyors Op. 20.09.2011 Dec. 12.12.2011 - TC 1132153 SCREENERS, having ALL of the following: a) hopper; b) screen deck; c) conveyors; d) diesel engine; e) hydraulic pumps; f) diesel fuel tank; g) wheels OR tracks Op. 25.08.2011 Dec. 21.11.2011

8479.82.00

8479.82.00

8479.82.00

- TC 1129154

8479.82.00 8479.82.00

BITUMEN AND POLYMER MIXING AND SHREDDING MACHINES, rotary Op. 26.08.2011 Dec. 07.11.2011 - TC 1129193 BATCH MIXERS, SLURRY, having ALL of the following: (a) dual mixing tanks; (b) centrifugal pumps; (c) densometer Op. 31.12.2010 Dec. 21.03.2011 - TC 1056479

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.82.00 BATCH MIXERS, SLURRY, skid mounted, having ALL of the following: (a) twin mixing tanks; (b) centrifugal pumps; (c) hydraulic power pack; (d) weight NOT less than 14 500 kg Op. 07.05.2010 Dec. 19.07.2010 - TC 1020868 CONTINUOUS BLENDING MIXERS, LIQUID AND DRY ADDITIVE, having ALL of the following: (a) pre-mixing stations; (b) eccentric screw pumps; (c) screw conveyors; (d) mixing heads Op. 07.04.2010 Dec. 25.06.2010 - TC 1016150 MUD DESILTING AND DESANDING PLANT, comprising of ALL of the following: (a) tanks; (b) shakers; (c) screens; (d) desanders; (e) desilters; (f) motors; (g) couplings; (h) transfers; (i) switch panels having emergency stop relay; (j) mud guns; (k) mud hoppers and hopper baskets; (l) pumps; (m) hydraulic crane; (n) electrically actuated valving; (o) integrated float level system; (p) single level working deck Op. 26.03.2010 Dec. 18.06.2010 - TC 1014886 MIXERS, DRY AND MOIST AND VISCOUS MATERIAL, vertical twin shaft, stainless steel, having BOTH of the following: (a) three dimensional spiral upward flow and horizontal cross flows; (b) capacity NOT greater than 5 000 litres Op. 18.12.2009 Dec. 12.03.2010 - TC 0949437 MIXERS, PLANT, TRAILER OR SKID MOUNTED, programmable logic controlled, having BOTH of the following: (a) hydration tanks; (b) liquid additive tanks Op. 16.12.2009 Dec. 05.03.2010 - TC 0949040 JET MILL SYSTEM, comprising All of the following: (a) compressor; (b) dryer; (c) jet mill; (d) storage bin; (e) feeder; (f) collectors; (g) valves; (h) fan Op. 18.09.2009 Dec. 27.11.2009

8479.82.00

8479.82.00

8479.82.00

8479.82.00

8479.82.00

- TC 0935302

8479.82.00

MILLS, GRINDING, COMBINED SALT AND PEPPER, having stainless steel panels Op. 30.06.2009 Dec. 18.09.2009 - TC 0922442

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.82.00 MIXERS, DELTA BLADE, stainless steel, having a maximum mixing capacity NOT less than 1 950 litres Op. 09.06.2009 Dec. 28.08.2009 - TC 0919311 GRINDING MILLS, PEPPER AND/OR SEASONING, being tableware Op. 01.05.2009 Dec. 24.07.2009 - TC 0914674 SCREENING MACHINES, inclined, having NOT less than two fractions Op. 19.12.2008 Dec. 13.03.2009 - TC 0844695 MIXERS AND GRANULATORS, continuous, horizontal drum, rotating shovel action Op. 26.04.2005 Dec. 09.09.2005 - TC 0504710 MIXERS, PHARMACEUTICAL Op. 22.07.2005 Dec. 07.10.2005 - TC 0509750

8479.82.00 8479.82.00 8479.82.00

8479.82.00 8479.82.00

MIXERS, comprising BOTH of the following: (a) mixing shafts; (b) deflocculators Op. 06.09.2005 Dec. 25.11.2005

- TC 0511816

8479.82.00

PLANT, MANUFACTURING, PAINT, comprising ALL of the following: (a) mixers; (b) mills; (c) dispersers; (d) motors; (e) tanks; (f) filters; (g) conveyors Op. 16.11.2005 Dec. 20.02.2006 - TC 0516046 AGITATORS, LEACHING PLANT, motor and gear reducer driven Op. 01.01.2007 Dec. 11.01.2007 - TC 0614818 TANKS, PRECIPITATION PLANT, being EITHER of the following: (a) agglomerator; (b) precipitator Op. 01.01.2007 Dec. 11.01.2007 - TC 0614819 COMPACTORS, GARBAGE, having a height NOT greater than 1 metre Op. 09.11.2006 Dec. 02.02.2007 - TC 0618829 MILLS, CONICAL, PHARMACEUTICAL Op. 18.12.2006 Dec. 09.03.2007 HOMOGENISERS Op. 09.07.2007 Dec. 02.10.2007 - TC 0619948 - TC 0710736 - TC 0712311

8479.82.00 8479.82.00

8479.82.00 8479.82.00 8479.82.00 8479.82.00 8479.82.00

MACHINES, SPHERICAL TABLET MAKING Op. 31.07.2007 Dec. 08.10.2007

MILLS, HAMMER, PLANT AND/OR FOOD AND/OR CHEMICAL, vibrating screen Op. 16.04.2008 Dec. 04.07.2008 - TC 0804329 BLENDERS, GRAVEL PACK, skid mounted, with or without hoppers, having BOTH of the following: (a) power packs; (b) mixing tanks Op. 15.05.2008 Dec. 04.08.2008 COLUMNS, PULSED, fibre reinforced plastic Op. 17.03.2008 Dec. 01.07.2008

8479.82.00

- TC 0808249 - TC 0814479

8479.82.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.82.00 MIXERS, PUMPING AND BLENDING, TRAILER OR SKID MOUNTED, having ALL of the following: (a) slurry gel tank; (b) one OR more hydration tanks; (c) one OR more liquid additive tanks Op. 27.09.1999 Dec. 23.10.2008 - TC 0836460 CULLET PROCESSING LINE, including BOTH of the following: (a) steel conveyors; (b) crushing rolls Op. 18.11.2008 Dec. 27.02.2009 - TC 0840254 SOIL SCREENING LINE, comprising ALL of the following: (a) horticultural turning and emptying machine; (b) soil sieve; (c) soil mixer; (d) hoppers Op. 19.11.2008 Dec. 06.02.2009 - TC 0840334 SCREENING MACHINES, inclined, having NOT less than two fractions Op. 19.12.2008 Dec. 13.03.2009 - TC 0844695 HOMOGENISERS, comprising BOTH of the following: (a) high pressure pump; (b) homogenising valve which creates a shearing action with the product being homogenised Op. 23.12.1993 Dec. 22.04.1994 - TC 9401059 STIRRERS, overhead, electronic, laboratory, with variable speed Op. 17.02.1994 Dec. 21.06.1994 - TC 9402297 DISPERSING MACHINES, laboratory, operating at a rotational speed from 8 000 rpm to 24 000 rpm, infinite speed control, effective volume from 0.2 mL to 2 500 mL, comprising ALL of the following: (a) dispersing machine; (b) sterilizable tools; (c) stand and clamp; (d) vessel holding bracket Op. 20.06.1994 Dec. 14.10.1994 - TC 9405249 STIRRERS, HOTPLATE, MAGNETIC, capable of heating to 350 degrees Celsius, temperature setting accuracy +/- 15 degree K or less, speed setting accuracy +/- 3% or less Op. 06.09.1994 Dec. 05.01.1995 - TC 9407361 MACERATOR, two stage, having BOTH of the following: (a) rotating impeller; (b) stationary cutting ring Op. 11.08.1995 Dec. 24.11.1995 - TC 9509635 SIEVE SHAKER, LABORATORY, with 3 dimensional electromagnetic drive, 3 000 vibrations per minute, vibration height infinitely adjustable from 0 mm to 3 mm, maximum operating noise level 65 dB, having operator controlled vibration, level, time and interval Op. 30.11.1995 Dec. 22.03.1996 - TC 9512968 SCREENING MACHINE, bulk material, three fractions, horizontal, circular oscillating Op. 30.05.1996 Dec. 20.09.1996 - TC 9608207 MIXING MACHINES, AUTOMOTIVE REFINISHING PAINT, with multiple impeller shafts powered by a drive motor Op. 29.01.1998 Dec. 17.04.1998 - TC 9800302

8479.82.00

8479.82.00

8479.82.00 8479.82.00

8479.82.00 8479.82.00

8479.82.00

8479.82.00

8479.82.00

8479.82.00

8479.82.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.82.00 BLENDING MACHINES, THERMOPLASTIC MATERIALS, gravimetric, having a maximum throughput NOT exceeding 400 kg/hour of proportioned and mixed product Op. 09.03.1998 Dec. 15.05.1998 - TC 9802055 PAINT MIXING MACHINES, GYROSCOPIC ACTION, capable of mixing canisters up to 30 L Op. 01.07.1998 Dec. 11.09.1998 - TC 9805746 BLENDERS, BATCH, HOMOGENOUS MIX, maximum capacity 2500 kgs Op. 17.05.2001 Dec. 27.07.2001 - TC 0104145 SHREDDING MACHINES, SCRAP MATERIALS, rotary Op. 23.07.2001 Dec. 26.10.2001 GRANULATORS, WASTE DISPOSAL Op. 07.08.2001 Dec. 19.10.2001 MIXING AND HOMOGENISING AND DISPERSING MACHINES Op. 22.03.2002 Dec. 14.06.2002 GRINDER AND SHREDDER, ROTARY Op. 31.03.2003 Dec. 27.06.2003 - TC 0106196 - TC 0106808 - TC 0202493 - TC 0303395

8479.82.00

8479.82.00 8479.82.00 8479.82.00 8479.82.00 8479.82.00 8479.89

SCRUBBER/POLISHERS, vacuum, battery powered, pedestrian operated, capable of sucking up wet solutions Op. 01.06.1984 Dec. 01.06.1984 - TC 8431759 RELOADING MACHINES, ammunition, being shot shell reloading presses, hand operated, single stage or progressive, capable of loading 250 shot shells/h Op. 23.07.1984 Dec. 17.12.1984 - TC 8432664 RELOADING MACHINES, ammunition, progressive, capable of producing 400 loaded rounds/h, when imported in EITHER of the following configurations: (a) without dies; (b) with dies fitted in actual operating positions Op. 29.01.1985 Dec. 24.05.1985 - TC 8433995 ANCHORS OR BLOCKS, safety, being devices for automatically paying in and out a safety line, as required, and which will lock in the event of a sudden pull on the safety line Op. 24.04.1984 Dec. 24.04.1984 - TC 8437622 BUBBLE BLOWING MACHINES Op. 24.04.1984 Dec. 24.04.1984 - TC 8437674

8479.89

8479.89

8479.89

8479.89 8479.89 8479.89 8479.89 8479.89 8479.89

TESTERS, tablet, pharmaceutical, hardness or disintegration Op. 05.06.1984 Dec. 05.06.1984 - TC 8438172 CLEANING MACHINES, magnetic tape type Op. 24.04.1984 Dec. 24.04.1984 DISPENSING MACHINES, continuous cloth towelling Op. 12.06.1984 Dec. 12.06.1984 DRIVES, marine, inboard/outboard Op. 12.06.1984 Dec. 12.06.1984 ENGRAVING MACHINES, computer controlled Op. 22.05.1984 Dec. 22.05.1984 - TC 8438792 - TC 8438854 - TC 8438860 - TC 8438873

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89 EXTRACTING MACHINES, chain rivet Op. 22.05.1984 Dec. 22.05.1984 - TC 8438879

8479.89 8479.89 8479.89 8479.89 8479.89

INSERTING MACHINES, printed circuit board component Op. 08.05.1984 Dec. 08.05.1984 - TC 8438956 REMOVERS, solder, non-electric Op. 19.06.1984 Dec. 19.06.1984 SAMPLING MACHINES, air pollution Op. 22.05.1984 Dec. 22.05.1984 SAMPLING MACHINES, airborne particle Op. 22.05.1984 Dec. 22.05.1984 - TC 8439097 - TC 8439110 - TC 8439111

SCRUBBING MACHINES, floor, capable of scrubbing a path having a width of 1.1 m, but NOT including combination sweeper/scrubber units Op. 05.06.1984 Dec. 05.06.1984 - TC 8439123 TYRE BEAD PUSH OFF TOOLS, hydraulic Op. 05.06.1984 Dec. 05.06.1984 WATCH GLASS FITTING APPARATUS Op. 05.06.1984 Dec. 05.06.1984 PLUGGING MACHINES, pipeline isolation Op. 05.03.1985 Dec. 11.11.1985 LUBRICATORS, mechanical, multi-line, direct feed Op. 20.03.1985 Dec. 04.08.1986 STARTERS, rewind, outboard motor Op. 30.05.1985 Dec. 18.11.1985 TRIM/TILTS, outboard motor, power operated Op. 30.05.1985 Dec. 16.09.1985 - TC 8439303 - TC 8439326 - TC 8530332 - TC 8530927 - TC 8532235 - TC 8532243

8479.89 8479.89 8479.89 8479.89 8479.89 8479.89 8479.89

TOILETS, portable, hand carried, water flushing type, self-contained, with a fresh water capacity NOT exceeding 20 L and a holding tank capacity NOT exceeding 24 L Op. 16.06.1985 Dec. 08.11.1985 - TC 8532458 WRENCHES, hydraulic torque Op. 11.07.1985 Dec. 23.09.1985 - TC 8533018

8479.89 8479.89

INSPECTION MACHINES, fault or contamination, glass or plastic container, but NOT including plastic container leak detection machines Op. 24.07.1985 Dec. 24.07.1985 - TC 8533292 STABILIZERS, roll, marine Op. 30.08.1985 Dec. 18.11.1985 - TC 8534103

8479.89 8479.89

WARNING DEVICES, whistle type, which indicate imminent expiry of air supply in self-contained breathing apparatus Op. 03.09.1985 Dec. 11.12.1985 - TC 8534137 COATING MACHINES, lens, ophthalmic or photographic, capable of BOTH of the following functions: (a) colour coating (tinting) the lens; (b) hardening the lens using a quartz coating Op. 20.09.1985 Dec. 20.01.1986 - TC 8534375

8479.89

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89 8479.89 8479.89 WELDERS, cold pressure, which join nonferrous metals and alloys by upset compressive loading Op. 27.06.1985 Dec. 21.03.1986 - TC 8632592 PLUNGER CONTAINERS, flammable liquid dispensing, hand operated Op. 27.03.1986 Dec. 16.02.1987 - TC 8632984 TOOLS, wire line positioning, running or pulling, capable of installation and retrieval of valves in oil or gas wells Op. 28.08.1986 Dec. 26.02.1987 - TC 8634910 WINDING MACHINES, spiral wound gasket Op. 07.08.1987 Dec. 20.06.1988 BLOCKING MACHINES, lens, prism type Op. 14.09.1987 Dec. 03.05.1988 LINE UP CLAMPS, internal, pipe line Op. 05.11.1987 Dec. 24.11.1988 - TC 8734485 - TC 8734992 - TC 8735726

8479.89 8479.89 8479.89 8479.89

CONTROLS, marine, being EITHER throttle or forward and/or reverse gear, but NOT including ANY of the following: (a) side mount controls; (b) controls incorporating engine start key; (c) steering controls; (d) control cable assemblies; (e) control cabling; (f) control linkages Op. 27.09.1988 Dec. 20.04.1990 - TC 8735975 STRIPPING MACHINES, wire, cable or conductor, whether or not capable of measuring AND/OR cutting Op. 01.01.1988 Dec. 09.06.1988 - TC 8800725 BRUSHMAKING MACHINES Op. 08.02.1988 Dec. 08.04.1988 - TC 8801175

8479.89

8479.89 8479.89

PRESSES, tabletting, captive die, NOT being EITHER of the following: (a) tablet presses when imported with granulators or vibratory feeders; (b) machines capable of the production of tablets or pellets by means of ANY type of extrusion process, and NOT including replacement tooling being punches or dies Op. 20.02.1987 Dec. 20.05.1988 - TC 8803476 ACTUATORS, brake, being electro-hydraulic thrusters Op. 15.03.1988 Dec. 05.09.1990 - TC 8803638 BLIND MAKING MACHINES Op. 14.04.1988 SPINDLES, nutrunner Op. 06.04.1988 Dec. 29.09.1988 Dec. 15.09.1988 - TC 8803728 - TC 8804310 - TC 8804783 - TC 8805813

8479.89 8479.89 8479.89 8479.89 8479.89 8479.89

SIMULATION MACHINES, weather effect Op. 20.05.1988 Dec. 08.09.1988 FOOT LIFTERS, industrial sewing machine Op. 02.06.1988 Dec. 01.09.1988

TRACTORS, portable, welding or cutting, complete with guide tracks or rails Op. 06.11.1989 Dec. 11.01.1991 - TC 8806059

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89 8479.89 8479.89 8479.89 TUBING HANGERS, sub-sea Op. 22.06.1988 Dec. 01.12.1988 - TC 8808427 - TC 8809594 - TC 8810538

MAKE UP TABLES, cinematographic film Op. 08.11.1988 Dec. 01.08.1989 SCREENS, clear view, rotary, marine Op. 03.01.1989 Dec. 03.01.1989

LENS MANUFACTURING OR PROCESSING EQUIPMENT, being ANY of the following: (a) grinding and/or polishing machines; (b) coating and/or curing machines; (c) centreing and/or marking machines Op. 18.11.1988 Dec. 25.05.1989 - TC 8810600 WASHING MACHINES, laboratory plate wells Op. 13.12.1988 Dec. 06.07.1989 - TC 8900071

8479.89 8479.89 8479.89 8479.89

BUFFERS, spring return oil, strike load capacity exceeding 1 100 kg Op. 13.04.1989 Dec. 04.01.1990 - TC 8903037 DUSTERS, bowling lane Op. 20.12.1989 Dec. 02.05.1990 - TC 8903670

TOILETS, marine free standing NOT including toilets designed or capable of being integrated into a system incorporating more than one toilet and NOT including toilets fitted with electric motors 24 V or greater Op. 25.08.1989 Dec. 02.09.1992 - TC 8906957 DISPENSING AND DISTRIBUTING SYSTEMS, chemicals and colourants, automatic, comprising ALL of the following: (a) control system; (b) metering tank for receiving dye/chemicals for dissolution; (c) outlet tank for distribution, but NOT including EITHER of the following: (a) systems imported with barrels; (b) systems imported with agitators Op. 20.09.1989 Dec. 27.02.1990 - TC 8907464 WIPER SYSTEMS, windscreen, marine, providing linear movement of wiper blades Op. 23.02.1989 Dec. 04.01.1990 - TC 8907764 DISPENSERS, aerosol, automated time release, battery operated Op. 12.06.1990 Dec. 07.01.1991 - TC 9005323 CUTTING MACHINES, plasma arc, being ioniser generators having a maximum rated output exceeding 35 A Op. 07.08.1990 Dec. 19.06.1991 - TC 9006948 CONTROLS, marine, side mount, being throttle, forward and/or reverse gear or ANY combination of those functions, whether or not incorporating engine key start Op. 19.10.1990 Dec. 21.02.1991 - TC 9009136 VIBRATORS, piston, pneumatically operated Op. 25.10.1990 Dec. 07.08.1991 RELEASE DEVICES, life raft, hydrostatic Op. 01.01.1988 Dec. 22.02.1993 - TC 9009277 - TC 9105682

8479.89

8479.89

8479.89 8479.89

8479.89

8479.89 8479.89

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89 8479.89 HOOKS, self-releasing, being automatic release mechanisms for rescue boats Op. 01.01.1988 Dec. 01.01.1988 - TC 9200332 MICROPIPETTE, hand held, battery operated, electronic, multifunctional, capable of performing various microlitre range handling operations including pipetting, reverse pipetting, multiple dispensing and diluting Op. 20.01.1992 Dec. 07.01.1993 - TC 9201318 VIBRATORY MOTORS, electric, having counter weights generating rotational vibrations Op. 02.03.1992 Dec. 07.07.1992 - TC 9202704

8479.89

8479.89

CLEANERS, watch movement, rotary, automatic or manual, providing separate immersions for cleaning, rinsing, lubricating and drying for assembled movements and parts Op. 06.07.1992 Dec. 28.01.1993 - TC 9206347 CUTTING TOOLS, ultrathermic, using metal alloy cutting rods, capable of burning at temperatures in excess of 5 500 degrees C Op. 08.09.1992 Dec. 09.02.1993 - TC 9208079 BOW THRUSTER, marine, yacht, retractable, complete with water proof housing and controls Op. 10.09.1992 Dec. 28.01.1993 - TC 9209009 SWEEPING MACHINES, self propelled, pedestrian controlled, internal combustion engine or battery powered electric motor driven, having all of the following: (a) a sweep path of 815 mm or more when operated with one side brush; (b) a dust and debris hopper capacity of 50 L or more Op. 25.09.1992 Dec. 28.01.1993 - TC 9209081 HEAD ASSEMBLIES, camera, geared, pan/tilt or scanner, incorporating separately controlled wheels for pan and tilt functions. Op. 23.01.1995 Dec. 21.04.1995 - TC 9504564 FOOD WASTE PULPERS, including ALL of the following: (a) electro-mechanical controls; (b) grinding wheel with tungsten carbide cutters; (c) dewatering press incorporating water self-flushing system; (d) single point drain connection; (e) water circulation pumps; (f) waste volume reduction up to 85%; (g) grinder motor power capacity NOT greater than 6.6 kW Op. 26.06.2013 Dec. 16.09.2013 - TC 1321514 LUBRICATORS, GREASE, RAILWAY TRACK, having ALL of the following: (a) digital control box; (b) double gear pump with electric motor; (c) wheel sensor; (d) tank; (e) rail wiping bars and rail clamp Op. 18.06.2013 Dec. 16.09.2013 - TC 1320326 PLASTIC MONOFILAMENT WINDING AND BUNDLING AND CUTTING AND PLASTIC WRAPPING MACHINES, including ALL of the following: (a) winders; (b) wrappers;

8479.89

8479.89

8479.89

8479.89

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) cutters Op. 20.06.2013 8479.89.90 Dec. 09.09.2013 - TC 1320731

SET DOWN SERVICE TOOLS, DOWNHOLE, modular, whether OR not assembled Op. 19.06.2013 Dec. 09.09.2013 - TC 1320419 INCUBATORS, LABORATORY, CELL CULTIVATION, having ALL of the following: (a) temperature range NOT less than minus 20 degrees C and NOT greater than 65 degrees C; (b) incubation chamber volume NOT greater than 200 L; (c) touch controller Op. 31.05.2013 Dec. 02.09.2013 - TC 1317989 HYDRAULIC HAMMER STATIONS, CARBON ANODE CLEANING, single hammer OR twin hammer, programmable logic controlled, including ALL of the following: (a) steel mounting frames AND bases; (b) hammer mount steel rails; (c) greasers with reservoirs AND valves; (d) hydraulic power modules with air-to-oil coolers Op. 29.05.2013 Dec. 26.08.2013 - TC 1317554 PACKAGING SEPARATORS, including ALL of the following: (a) tubular separation chamber with adjustable paddles; (b) access doors; (c) separator screens; (d) liquid addition points; (e) electrical controls AND starter panel Op. 16.05.2013 Dec. 12.08.2013 - TC 1316320 COMPOST AERATION SYSTEM, programmable logic controlled, having ALL of the following: (a) woven polyester AND polytetrafluoroethylene laminate covers; (b) temperature AND oxygen probes; (c) cover winders; (d) water traps; (e) blowers; (f) aeration channels Op. 06.05.2013 Dec. 05.08.2013 - TC 1314739

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

HEIGHT SAFETY HARNESS AND HOIST MACHINES, having ALL of the following: (a) maximum weight carrying capacity greater than 130 kg; (b) total machine weight less than 90 kg; (c) cabled AND wireless remote controls; (d) aramid safety line length NOT greater than 130 m; (e) clips; (f) manual override controls; (g) cable messaging module; (h) maximum hoist speed NOT less than 0.3 m per second with a carry weight of 140 kg Op. 26.04.2013 Dec. 22.07.2013 - TC 1313845 TOOLS, SETTING OR RETRIEVING, DOWNHOLE, having two OR more of ANY of the following: (a) hydraulic power module; (b) anchors; (c) plug setting module Op. 24.04.2013 Dec. 22.07.2013 - TC 1313698

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 FRUIT CLEANING AND WAXING AND POLISHING MACHINES, programmable logic controlled, including ALL of the following: (a) stainless steel guides AND water basins; (b) motorized horsehair brushes; (c) fruit transporters AND unloaders; (d) waxers; (e) safety photocell sensors; (f) control panels AND speed controllers Op. 18.04.2013 Dec. 15.07.2013 - TC 1313228 STABILISERS, BOTTOM HOLE ASSEMBLY, OIL AND/OR GAS WELL, mandrel, whether OR not assembled Op. 08.04.2013 Dec. 24.06.2013 - TC 1312089 METAL STRIP WRAPPERS, STEEL COLD ROLLING MILL Op. 18.03.2013 Dec. 12.06.2013 - TC 1309606

8479.89.90

8479.89.90 8479.89.90

ENGINE EXHAUST GAS MODULES, POWER GENERATION SET, including ALL of the following: (a) charge air silencer; (b) expansion tank; (c) oil mist separator; (d) piping; (e) purge fan module Op. 13.03.2013 Dec. 12.06.2013 - TC 1309202 ALUMINIUM EXTRUSION THERMAL INSULATION BARRIER ASSEMBLY MACHINES, programmable logic controlled, including ALL of the following: (a) knurling wheels; (b) polyamide insulation strip inserter; (c) polyamide insulation strip to aluminium extrusion crimping rolling discs Op. 07.02.2013 Dec. 02.05.2013 - TC 1304576 PARTS, GRAVEL PACK SYSTEM, OIL AND/OR GAS WELL, being circulating housing extensions Op. 16.05.2013 Dec. 05.08.2013 - TC 1316147
PARTS, GRAVEL PACK SYSTEM, OIL AND/OR GAS WELL, being downhole anti-swab extensions Op. 15.02.2013 Dec. 02.05.2013 - TC 1306129

8479.89.90

8479.90.00

8479.90.00

8479.89.90

TAKE-UP MACHINES, CABLE, having a drum diameter NOT greater than 2 400 mm Op. 08.02.2013 Dec. 22.04.2013 - TC 1304972 DISTRIBUTION MODULES, SUBSEA, having ALL of the following: (a) electrical module; (b) optical module; (c) hydraulic module; (d) chemical module Op. 06.02.2013 Dec. 15.04.2013 - TC 1304574
CONTROL MODULE MOUNTING BASES, SUBSEA, whether OR not assembled, having ALL of the following: (a) frame structures; (b) baseplates; (c) hydraulic tubing;

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(d) connectors; (e) return compensation system Op. 20.12.2012 Dec. 18.03.2013 8479.89.90 - TC 1248602

WHEEL FLANGE LUBRICATION SYSTEM, TRAM, including ALL of the following: (a) casing AND/OR base support with flange to wheel housing; (b) compressed air supply module AND control module; (c) grease tank combination AND dosing system; (d) pipe AND hose lines; (e) spraying nozzles Op. 21.12.2012 Dec. 18.03.2013 - TC 1300437 CENTRIFUGES, BODY TISSUE AND/OR BODY FLUID, programmable logic controlled, including ALL of the following: (a) centrifuge; (b) raw material and sample handling robotic arms; (c) LCD screen Op. 05.11.2012 Dec. 21.01.2013 - TC 1242273 WASTE PAPER EXTRACTION PLANT, programmable logic controlled, including NOT less than three of the following categories: (a) shredder; (b) separator; (c) jet filter; (d) channelling; (e) ducting Op. 12.10.2012 Dec. 07.01.2013 - TC 1238879 CUTTERS, SUBSEA, WIRELINE AND/OR COILED TUBING Op. 12.10.2012 Dec. 02.01.2013

8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90

- TC 1239254

ROPE PLACING MACHINES, LAMINATED GLASS SHEET SEPARATION Op. 16.10.2012 Dec. 07.01.2013 - TC 1239577 BULK FERTILISER AND POTTING MIX PRODUCTION LINE, including ALL of the following: (a) granulator; (b) coating machine; (c) dryer; (d) cooler; (e) sifter; (f) tanks; (g) elevators; (h) washing towers; (i) crushers; (j) double twisted mixer; (k) reverse osmosis water treatment module; (l) gas boiler; (m) pulping module; (n) recycled water module; (o) dusting module; (p) conveyors; (q) instrument control room Op. 02.10.2012 Dec. 27.12.2012 - TC 1237185 GLASS HANDLING MACHINES, LAMINATED GLASS ASSEMBLY LINE, being EITHER of the following: (a) assembly carriage station; (b) polyvinyl butyral film application station Op. 11.09.2012 Dec. 03.12.2012 - TC 1234591 VERTICAL CONNECTION SYSTEM, SUBSEA, including ALL of the

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


following: (a) actuators; (b) locking rings; (c) male hubs Op. 14.09.2012 8479.89.90 8479.89.90

Dec. 10.12.2012

- TC 1235264 - TC 1235265

PRESSURE CAPS, VERTICAL CONNECTION SYSTEM, SUBSEA Op. 14.09.2012 Dec. 10.12.2012

RUNNING AND RETRIEVAL TOOLS, VERTICAL CONNECTION SYSTEM, SUBSEA, having BOTH of the following: (a) tool envelope diameter NOT less than 1 412 mm; (b) weight NOT less than 4 536 kg Op. 14.09.2012 Dec. 10.12.2012 - TC 1235266 SUBSEA ACCUMULATOR MODULES, having ALL of the following: (a) working pressure NOT less than 65 MPa (9 500 psi); (b) maximum working temperature NOT less than 115 degrees Celsius; (c) reservoir capacity NOT greater than 16.5 L Op. 19.09.2012 Dec. 10.12.2012 - TC 1235722 OIL STORAGE TANK CLEANING AND OIL RECOVERY SYSTEM, programmable logic controlled, including ALL of the following: (a) decanters; (b) electrical instrumentation modules; (c) heat exchangers; (d) nozzle sweepers; (e) oil distributors; (f) piping AND/OR pipe fittings; (g) pumps; (h) separator; (i) vacuum tank Op. 19.09.2012 Dec. 10.12.2012 - TC 1235801 PRESSURE CONTROL EQUIPMENT STRINGS, OIL AND/OR GAS WELL, including NOT less than ANY 3 of the following categories: (a) frame; (b) injection control; (c) tool catcher; (d) lubricator section; (e) clamps; (f) lifting beam; (g) tool trap; (h) pumps; (i) valves; (j) wellhead adaptor flange; (k) slings; (l) unions; (m) hoses; (n) seals; (o) cutters; (p) cages; (q) cable cutter sub; (r) pump-in sub; (s) test sub Op. 10.08.2012 Dec. 29.10.2012 - TC 1229365 TRIMMING KNIVES, CONVEYOR BELT MANUFACTURING LINE, having ALL of the following: (a) support structures; (b) cutting assemblies with DC drive; (c) belt support rollers Op. 13.08.2012 Dec. 29.10.2012 - TC 1229642

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 HIGH DENSITY POLYETHYLENE FLAKE IMPURITY REMOVAL PLANT, including ALL of the following: (a) centrifuge washer; (b) drying centrifuge; (c) vibrating screen; (d) wash reactor; (e) conveyor; (f) sand classifier; (g) filters; (h) blowers; (i) separation tanks; (j) re-cycling tanks; (k) pneumatic transporter; (l) fluid bed dryer; (m) elutriator; (n) hopper; (o) screw conveyor; (p) feeding cyclone; (q) doser; (r) pumps AND valves; (s) electrical control cabinets Op. 02.07.2012 Dec. 03.10.2012 - TC 1223012 TABLES, HOT SUCTION, CONSERVATION, including ALL of the following: (a) aluminium perforated work surfaces; (b) edge heating; (c) work surface heating; (d) vacuum AND airflow cooling; (e) external inlet valves Op. 05.07.2012 Dec. 26.09.2012 - TC 1223545 PLASTIC CUP THERMOFORMING LINE MACHINES, being EITHER of the following: (a) film roll payoff, having ALL of the following: (i) dual roll positions; (ii) welding table; (iii) frame controller, (b) vertical tower film accumulator Op. 06.07.2012 Dec. 26.09.2012 - TC 1223656 SWEEPERS, SUCTION, ride in, having ALL of the following: (a) two wheel OR four wheel steering; (b) sweeping width NOT greater than 3 130 mm; (c) dirt hopper capacity NOT greater than 1.85 m3; (d) transport mode NOT greater than 50 km per hour; (e) outer turning radius NOT greater than 3 200 mm; (f) width NOT greater than 1 320 mm; (g) height NOT greater than 1 995 mm Op. 16.05.2012 Dec. 19.09.2012 - TC 1216162 CEMENTING HEADS, OIL AND GAS WELL, including ALL of the following: (a) safety valves; (b) plug launcher; (c) swivel assembly Op. 06.07.2012 Dec. 19.09.2012 - TC 1223655 WINDERS, CONVEYOR BELT MANUFACTURING LINE Op. 31.07.2012 Dec. 15.10.2012 - TC 1227482

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90

COMPLETION DEFLECTORS, MULTILATERAL OIL AND/OR GAS WELL, downhole Op. 02.08.2012 Dec. 15.10.2012 - TC 1227985

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 8479.89.90 CREELS, MOTORISED, CONVEYOR BELT MANUFACTURING LINE Op. 03.08.2012 Dec. 15.10.2012 - TC 1228137 CLAMPING AND TENSIONING DEVICES, CONVEYOR BELT MANUFACTURING LINE Op. 03.08.2012 Dec. 15.10.2012 - TC 1228139 ROLLER AND SPREADER COMBS, CONVEYOR BELT MANUFACTURING LINE, including supports Op. 03.08.2012 Dec. 15.10.2012 - TC 1228140 DISPENERS, PLASTIC FILM, programmable logic controlled, having BOTH of the following: (a) film roller, having a width NOT less than 3 500 mm; (b) film cutter Op. 27.06.2012 Dec. 10.09.2012 - TC 1222260 POLYETHYLENE TEREPHTHALATE (PET) CONTAINER AND/OR PACKAGING RECYCLING PREPARATION MODULE, having ALL of the following: (a) prewash centrifuge; (b) disk label separator; (c) waste conveyor screw; (d) waste screw compactor; (e) metal detector; (f) electro-pneumatic materials diverter Op. 21.06.2012 Dec. 12.09.2012 - TC 1221561 POLYETHYLENE TEREPHTHALATE FLAKES SANITISING PLANT, including ALL of all the following: (a) washing reactors; (b) centrifuges; (c) vibrating screens; (d) conveyors; (e) sand classifiers; (f) silos; (g) filters; (h) blowers; (i) recirculation tanks; (j) recycling tanks; (k) stirrers; (l) fluid bed dryer; (m) rinsing reactors; (n) dosing screw; (o) pumps AND valves; (p) electrical AND control cabinets Op. 07.05.2012 Dec. 12.09.2012 - TC 1214799 BELT CHANGERS, DOUBLE BELT PRESS Op. 04.06.2012 Dec. 03.09.2012

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90

- TC 1218933

PRESSURE CUSHION CHANGING CARRIAGES, DOUBLE BELT PRESS Op. 04.06.2012 Dec. 03.09.2012 - TC 1218945 OIL SPILL CONTAINMENT BOOMS, having BOTH of the following: (a) constant ambient inflation boom air pressure controls; (b) continuous sea wave action boom air re-inflator Op. 30.05.2012 Dec. 20.08.2012 - TC 1218356 PLASTIC BOTTLE SORTING PLANT, including ALL the following: (a) ballistic waste AND bottle separators; (b) conveyors; (c) magnetic separators; (d) eddy current metal separators; (e) drum screener;

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(f) vibrating table; (g) bale opener; (h) electrical AND control cabinets; (i) framework supports AND walkways Op. 02.03.2012 Dec. 30.07.2012 8479.89.90

- TC 1207339

PIPE CONNECTOR FITTING INTERNAL CARTRIDGE ASSEMBLY MACHINES, programmable logical controlled Op. 24.04.2012 Dec. 16.07.2012 - TC 1213114 ASSEMBLIES, PIPE AND TUBE, OIL AND GAS WELL, being ALL of the following: (a) Y shaped branched steel tubes; (b) threaded bore well connection steel pipes; (c) steel pipes, having variable aperture sizes Op. 24.04.2012 Dec. 16.07.2012 - TC 1213238 TENSIONER RINGS, OIL AND GAS WELL Op. 30.04.2012 Dec. 16.07.2012 - TC 1213879

8479.89.90

8479.89.90 8479.89.90

GAS MIXING MACHINES, including ALL of the following: (a) gas mixing cabinet; (b) gas pressure controllers; (c) gas filters Op. 16.04.2012 Dec. 09.07.2012 - TC 1212072 STREET AND PAVEMENT SWEEPERS, suction operated, self propelled, having ALL of the following: (a) sweeping width NOT greater than 2 050 mm; (b) dirt hopper capacity NOT greater than 1 m3; (c) transport speed NOT greater than 40 km/h; (d) outer turning radius NOT greater than 6 800 mm; (e) width NOT greater than 1 200 mm; (f) height NOT greater than 2 180 mm Op. 12.04.2012 Dec. 02.07.2012 - TC 1211760 FOAMING MACHINES, stainless steel, programmable logic controlled, having ALL of the following: (a) centrifugal pumps; (b) NOT less than two mixing heads; (c) foam generation NOT less than 800 kg per hour and NOT greater than 6 000 kg per hour Op. 22.03.2012 Dec. 15.06.2012 - TC 1209516 TEST AND/OR HANDLING CAPS, OIL AND/OR GAS WELL EQUIPMENT Op. 02.03.2012 Dec. 28.05.2012 - TC 1207388 TILLERS, SNOW GROOMER Op. 24.02.2012

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90

Dec. 14.05.2012

- TC 1206621

SUBSEA CONTROL MODULES, OIL AND GAS WELL, having ALL of the following: (a) mandrel assembly; (b) accumulators; (c) subsea electronics module; (d) hydraulic valve; (e) manifold pod Op. 23.01.2012 Dec. 16.04.2012 - TC 1202624 ABATTOIR ANIMAL OESOPHAGUS PLUG SYSTEM, including ALL of the following: (a) control cabinet; (b) spring balance hose holder;

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) vacuum pump; (d) air AND water pressure regulators; (e) air AND water hoses; (f) plastic oesophagus plugs Op. 19.01.2012 Dec. 02.04.2012 8479.89.90 8479.89.90 8479.89.90 BRASS PUSH-FIT PIPE FITTINGS ASSEMBLY MACHINES Op. 12.01.2012 Dec. 02.04.2012

- TC 1202344 - TC 1201383

PIPELINE PIG SIGNALLERS, intrusive, bi-directional Op. 12.01.2012 Dec. 26.03.2012 - TC 1201364 SAND DISTRIBUTION SYSTEM, TRAM OR TRAIN, including ALL of the following: (a) hopper; (b) dosing piston; (c) air compressor Op. 06.12.2011 Dec. 06.03.2012 - TC 1140594 CYCLONES, SEPARATING, AIR AND POLYPROPYLENE RESIN Op. 11.01.2012 Dec. 19.03.2012 - TC 1201362

8479.89.90 8479.89.90

CRUSHING MILLS, LEAD ACID BATTERY, including ALL of the following: (a) hammermill crusher; (b) separators; (c) screw conveyors Op. 21.11.2011 Dec. 06.02.2012 - TC 1138786 ALIGNMENT MACHINES, TRUCK CHASSIS OR BUS CHASSIS, having BOTH of the following: (a) platform length NOT less than 6 m; (b) platform width NOT less than 2 m Op. 28.10.2011 Dec. 17.01.2012 - TC 1136080 VACUUM TOILETS, electronic Op. 24.10.2011 Dec. 16.01.2012 - TC 1135485

8479.89.90

8479.89.90 8479.89.90

CLEAN IN PLACE SKID MACHINES, ELECTRODEIONIZATION SYSTEM, including ALL of the following: (a) tanks; (b) control panel; (c) pumps; (d) pipes; (e) welded steel frame Op. 12.10.2011 Dec. 04.01.2012 - TC 1135188 PRESSES, ALUMUNIUM DROSS Op. 13.10.2011

8479.89.90 8479.89.90

Dec. 04.01.2012

- TC 1134471

TRACTORS, WIRELINE, OIL AND GAS EXPLORATION, whether or not assembled, downhole conveyance, gauge size NOT less than 5 cm but NOT greater than 30 cm Op. 07.10.2011 Dec. 04.01.2012 - TC 1134132 PRESSES, ISOSTATIC Op. 19.09.2011 Dec. 12.12.2011 - TC 1132150

8479.89.90 8479.89.90

DRY MORTAR MIXING PLANT, programmable logic controlled, including ALL of the following: (a) feeders and conveyors; (b) inverters; (c) reducers;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(d) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r) (s) (t) (u) (v) (w) (x) (y) Op. 8479.89.90 hoppers; gas burners; burner frame; dryers; filters; bucket elevators; chutes; screens; dust collectors; valves; indicators and sensors; powder storage; silos; connecting pipes and cloths; vibrators and vibration hammer; mixers; collectors; cutters; compressors; cables; camera; frames 29.08.2011 Dec. 21.11.2011

- TC 1129281

SWEEPERS, SUCTION, ride in, having ALL of the following: (a) two wheel OR four wheel steering; (b) sweeping width NOT greater than 3 120 mm; (c) dirt hopper capacity NOT greater than 1.85 m3; (d) transport speed NOT greater than 50 km per hour; (e) outer turning radius NOT greater than 3 900 mm; (f) width NOT greater than 1 320 mm; (g) height NOT greater than 1 950 mm Op. 10.08.2011 Dec. 10.11.2011 - TC 1127069 PRESSES, HYDRAULIC MOULDING, automotive carpet, programmable logic controlled Op. 10.08.2011 Dec. 02.11.2011 - TC 1126916 ANODE CLEANING MACHINES, ROLLER CONVEYOR INTEGRATED, CARBON BAKE FURNACE, being ANY of the following: (a) anode deburrers; (b) anode stub hole cleaners, with OR without photoelectric sensors; (c) anode scrapers Op. 03.08.2011 Dec. 28.10.2011 - TC 1126039 CASING HANGERS, OIL AND/OR GAS WELL Op. 28.06.2011 Dec. 19.09.2011 - TC 1121083

8479.89.90

8479.89.90

8479.89.90 8479.89.90

AIR HANDLING MACHINES, COMPUTER SERVER, DATA CENTRE, including ALL of the following: (a) cooling coil; (b) outside air particulate filtration system; (c) indoor room air particulate filtration system; (d) variable speed fans; (e) digital controls; (f) electrical cabinets; (g) ultrasonic humidification system; (h) capacity NOT less than 90 kW Note: TC 1113719 does not include packaged air conditioning system with rotary heat exchanger Op. 28.04.2011 Dec. 19.09.2011 - TC 1113719

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 SOLAR REFLECTOR ASSEMBLY LINE, programmable logic controlled, including ALL of the following: (a) clinching station; (b) glue line dispenser; (c) mirror shaping and joining station; (d) conveyors; (e) handlers; (f) cleaning brushes; (g) photogrammetric quality measurement station; (h) destackers Op. 23.05.2011 Dec. 22.08.2011 - TC 1116117 PIPE REHABILITATION WINDING MACHINES Op. 19.05.2011 Dec. 08.08.2011 - TC 1116105

8479.89.90 8479.89.90

REELERS, OIL AND GAS WELL, hydraulic, trailer mounted, having remote spooling controls Op. 11.05.2011 Dec. 01.08.2011 - TC 1114829 WIRE FEED MACHINES, STEEL LADLE INJECTION SYSTEM, twin feed Op. 20.04.2011 Dec. 11.07.2011 - TC 1113295 PIPELINE CLEARING AND REPAIRING ROBOT SYSTEM, remote controlled, including ALL of the following: (a) control panel; (b) cutting AND grinding AND laminating robot with cameras; (c) cable drum Op. 18.04.2011 Dec. 11.07.2011 - TC 1112959 BURNER HEADS, OIL AND/OR GAS, including support booms, having ALL of the following: (a) oil AND/OR gas burning guns; (b) atomisers; (c) integrated lines Op. 07.04.2011 Dec. 04.07.2011 - TC 1111840 ADHESIVE FILM LAMINATORS, SHEET METAL Op. 04.04.2011 Dec. 20.06.2011 - TC 1111259

8479.89.90 8479.89.90

8479.89.90

8479.89.90 8479.89.90

DISPLAY BOARDS, POSTER, scrolling, single sided OR double sided, illuminated, electrically powered Op. 15.03.2011 Dec. 06.06.2011 - TC 1109094 GAS RECOVERING MACHINES, including BOTH of the following: (a) gas chiller; (b) carbon dioxide gas compressor Op. 22.02.2011 Dec. 09.05.2011 - TC 1106938 POWDER FEEDERS, COAXIAL LASER THERMAL SPRAY CLADDING MACHINE Op. 13.01.2011 Dec. 11.04.2011 - TC 1101645 MAGNETIC DRUMS, FERROUS MATERIAL REMOVING Op. 13.01.2011 Dec. 11.04.2011 - TC 1101646

8479.89.90

8479.89.90 8479.89.90 8479.89.90

COATING AND LAMINATING MACHINES, solventless, having BOTH of the following: (a) coating width NOT less than 1 600 mm; (b) lamination material thickness capacity NOT greater than 150 mm Op. 11.01.2011 Dec. 04.04.2011 - TC 1101417 KITS, WEDGE, including ALL of the following: (a) wedge;

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(b) stay plates; (c) wedge clip; (d) lubricant; (e) installation instructions Op. 10.01.2011 Dec. 04.04.2011 8479.89.90 8479.89.90 VIBRATORS, FURNACE FEEDER Op. 10.01.2011 Dec. 04.04.2011

- TC 1101030 - TC 1101019

SHREDDING LINE, SCRAP MATERIAL, having ALL of the following: (a) input feeder having a capacity NOT less than 55 tonnes per hour; (b) rotary shredder having a capacity NOT less than 35 tonnes per hour; (c) discharge chain conveyor having a capacity NOT less than 450 cubic metres per hour; (d) hydraulic power pack; (e) power and control cabinets Op. 17.12.2010 Dec. 16.03.2011 - TC 1055016 BIOREACTOR, CELL CULTURE Op. 01.01.2011 Dec. 11.03.2011 - TC 1107381

8479.89.90 8479.89.90

LAMINATING MACHINES, SOLAR PANEL, having ALL of the following; (a) working area length NOT less than 3 300 mm and NOT greater than 4 600 mm; (b) working area width NOT less than 1 700 mm and NOT greater 2 400mm; (c) lamination material thickness NOT greater than 20 mm; (d) NOT less than 15 and NOT greater than 25 temperature control zones; (e) dry pumps; (f) upper release sheet cleaning system Op. 22.11.2010 Dec. 28.02.2011 - TC 1051419 BRAKE PAD MANUFACTURING MACHINES, programmable logic controlled, incorporating ALL of the following: (a) pressing stations; (b) maximum pressing force NOT less than 1 800 kN; (c) hopper storage capacity NOT less than 100 L; (d) maximum moulding temperature NOT less than 45 degrees Celsius; (e) maximum mould filling height NOT less than 20 mm; (f) tooling cleaners; (g) release agent sprayers; (h) weighers Op. 04.11.2010 Dec. 24.01.2011 - TC 1049168 OIL SPILL CONTAINMENT SYSTEM, OCEAN, including BOTH of the following: (a) single point inflation boom; (b) diesel engine powered hydraulic boom reel with integrated air blower Op. 08.10.2010 Dec. 07.01.2011 - TC 1045490 LAMINATING MACHINES, FLAKEBOARD AND/OR MEDIUM DENSITY FIBREBOARD, having a working width NOT less than 300 mm and NOT greater than 2 600 mm Op. 06.10.2010 Dec. 10.01.2011 - TC 1045126 BRIDGE PLUGS, OIL AND GAS WELL, downhole, retrievable, having a pressure rating NOT less than 15 500 kPa Op. 05.10.2010 Dec. 07.01.2011 - TC 1045125

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 HYDROSTATIC SETTING TOOLS, OIL AND GAS WELL, downhole, having a maximum working pressure NOT less than 67 000 kPa Op. 05.10.2010 Dec. 07.01.2011 - TC 1045124 HOSE REELS, OIL AND GAS WELL, sub-sea, offshore OR onshore, comprising BOTH of the following: (a) pneumatically operated reel; (b) multi modal cradle conforming to Det Norske Veritas 2.7-1(DNV 2.7-1) Op. 01.10.2010 Dec. 07.01.2011 - TC 1044904 SUBSEA HYDRAULIC ACCUMULATOR MODULES, having ALL of the following: (a) central mandrel; (b) piston accumulators, each having an operating pressure NOT less than 34 450 kPa; (c) reservoir accumulator Op. 12.08.2010 Dec. 08.11.2010 - TC 1037130 HORSE WALKER EXERCISE AND TRAINING MACHINES, oval track Op. 09.08.2010 Dec. 01.11.2010 - TC 1036527 HORSE WALKER EXERCISE AND TRAINING MACHINES, salt water Op. 09.08.2010 Dec. 01.11.2010 - TC 1036523 PIPE LINING AND SEALING SYSTEM, including ALL of the following: (a) compressor; (b) air supply hoses; (c) control monitor; (d) fibre glass push rod; (e) sealant packer; (f) guidance camera Op. 03.08.2010 Dec. 01.11.2010 - TC 1035607 HANDLERS, MATERIAL, MOBILE AND/OR CRAWLER AND/OR PEDESTAL MOUNTED, without attachments, having ALL of the following: (a) diesel engine or electric drive; (b) action radius NOT less than 7 m; (c) operating weight NOT less than 18 t; (d) boom length (including loading stick) NOT less than 9 m; (e) cabin Op. 15.07.2010 Dec. 01.11.2010 - TC 1032320 ACCUMULATORS, HYDRAULIC PISTON, complying with Australian Standard AS 1210 Supp 1-1990, having ALL of the following: (a) working pressure NOT less than 24 MPa; (b) length NOT less than 2 000 mm; (c) diameter NOT less than 245 mm Op. 02.08.2010 Dec. 25.10.2010 - TC 1035437 SELECTIVE LASER MELTING (SLM) PROCESS MACHINES Op. 29.07.2010 Dec. 25.10.2010 - TC 1034879

8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90

GANGWAYS, SHIP/WHARF ACCESS, hydraulic, telescopic, horizontal and vertical self-adjusting Op. 30.07.2008 Dec. 29.09.2010 - TC 1042368 COLLARS, STAGE CEMENTING, OIL AND GAS WELL CASING Op. 08.07.2010 Dec. 29.09.2010 - TC 1031203

8479.89.90 8479.89.90

AIR BUBBLE AND ALUMINIUM FOIL LAMINATE PRODUCTION LINE, having ALL of the following: (a) winders;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(b) unwinders; (c) extruders; (d) mixers; (e) former and laminators Op. 08.07.2010 Dec. 13.09.2010 8479.89.90

- TC 1031105

LADDERS, FALL PROTECTIVE, incorporating fixed safety rails and removable runners Op. 03.06.2010 Dec. 30.08.2010 - TC 1024804 PIPE THRUSTER MACHINES, having ALL of the following: (a) operating angle 0 degrees to 15 degrees from horizontal; (b) push force NOT less than 500 tonne; (c) pull force NOT less than 500 tonne; (d) pipe diameter NOT less than 600 mm and NOT greater than 1 225 mm Op. 28.05.2010 Dec. 23.08.2010 - TC 1023821 SUBSEA CONTROL MODULES, OIL AND GAS PRODUCTION, having a weight NOT less than 1 500 kg Op. 07.05.2010 Dec. 02.08.2010 - TC 1020869 TEST TREES, SUBSEA OIL AND/OR GAS WELLS, whether or not including flowheads, comprising ALL of the following: (a) ball valves; (b) flapper valves; (c) latch assemblies Op. 11.01.2010 Dec. 22.03.2010 - TC 1001707 DISPENSERS, MIXING AND METERING, GLASS SEALANT Op. 16.04.2010 Dec. 09.07.2010 - TC 1017720

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90

REELER SYSTEM, UMBILICAL, OIL AND GAS WELL, including ALL of the following: (a) electro-hydraulic umbilical cable; (b) reeler; (c) integrated hydraulic power unit; (d) integrated electric power unit Op. 31.03.2010 Dec. 18.06.2010 - TC 1015459 PROCESSING MACHINES, GELATINE, having ALL of the following: (a) dryers; (b) conveyors; (c) pumps; (d) discharge hoppers; (e) maximum capacity NOT greater than 625 kg/h finished gelatine product; (f) maximum drying temperature NOT greater than 60 degrees C Op. 08.01.2010 Dec. 07.04.2010 - TC 1001491 TAMPON MAKING MACHINES Op. 30.12.2009 Dec. 12.03.2010 - TC 0950450

8479.89.90

8479.89.90 8479.89.90

LABORATORY TEST TUBE SORTING AND PROCESSING MACHINES, having ALL of the following: (a) sorting speed NOT less than 750 test tubes per hour and NOT greater than 1 250 test tubes per hour; (b) test tube inspection modules; (c) sample loading draws; (d) bar code readers; (e) centrifuging modules; (f) volume measurers Op. 17.11.2009 Dec. 05.02.2010 - TC 0943498

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 8479.89.90 CLEANERS, FISH FARMING NET, self-propelled, submergible Op. 30.10.2009 Dec. 22.01.2010 - TC 0941082 MOORING HOOKS, QUICK RELEASE Op. 27.10.2009 Dec. 15.01.2010 - TC 0940525

TRANSFORMER EXPLOSION PROTECTION SYSTEM, comprising BOTH of the following: (a) nitrogen cabinet; (b) depressurisation set, having ALL of the following: (i) shutter assembly; (ii) isolation valves; (iii) gaskets; (iv) shock absorbers; (v) control box; (vi) isolation valve connections Op. 31.08.2009 Dec. 20.11.2009 - TC 0932238 PAINTING AND VARNISHING MACHINES, including ALL of the following: (a) coating head; (b) demister; (c) vacuum pumps; (d) separation tower; (e) coating tank and heater; (f) conveyors Op. 19.08.2009 Dec. 06.11.2009 - TC 0930347 PAINT ROLLER HEAD MAKING MACHINES Op. 11.08.2009 Dec. 16.10.2009 - TC 0929263

8479.89.90

8479.89.90 8479.89.90 8479.89.90 8479.89.90

MAKE-UP AND BREAK-OUT MACHINES, hydraulically powered Op. 03.08.2009 Dec. 16.10.2009 - TC 0927984 SUBSEA WELLHEAD PROCESSING UNITS, HYDROCARBON Op. 24.07.2009 Dec. 16.10.2009 - TC 0926753

COOLERS AND WARMERS, FOOD AND BEVERAGE, thermoelectric, portable, having BOTH of the following: (a) power capacity NOT less than 20 W and NOT greater than 40 W; (b) volume NOT greater than 4 litres Op. 30.09.2008 Dec. 08.10.2009 - TC 0932720 DEHUMIDIFIERS, having EITHER of the following: (a) maximum water extraction rate NOT less than 15 L per 24 hours at 30 degrees Celsius with a relative humidity of 60%; (b) defroster Op. 28.07.2009 Dec. 09.10.2009 - TC 0927025 DRAINAGE SYSTEM, SCRAP MOTOR VEHICLE, vacuum pump operation, with or without ANY of the following: (a) fuel tank drilling machines; (b) shock absorber drilling machines; (c) gearbox drilling machines; (d) catalytic converter cutting machines Op. 08.07.2009 Dec. 25.09.2009 - TC 0923933 SECONDARY RELEASE TOOLS, CHRISTMAS TREE, SUBSEA Op. 02.07.2009 Dec. 18.09.2009 - TC 0922726

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 RUNNING TOOLS, CHRISTMAS TREE, SUBSEA Op. 02.07.2009 Dec. 18.09.2009 - TC 0922724

VEHICLES, SUCTION COLLECTION, ride in, having ALL of the following: (a) hopper capacity NOT greater than 2.0 cubic metres; (b) hopper weight capacity NOT greater than 3 000 kg; (c) maximum suction floor nozzle width NOT greater than 2 000 mm; (d) turning radius NOT greater than 5 150 mm; (e) maximum travelling speed NOT greater than 10 km/h; (f) four wheel steering Op. 04.06.2009 Dec. 28.08.2009 - TC 0918988 CARGO HOOK LIFTING CAROUSELS, HELICOPTER, having a drop release controller Op. 20.05.2009 Dec. 14.08.2009 - TC 0917126 CEMENTING MANIFOLDS, DOWNHOLE Op. 19.05.2009 Dec. 07.08.2009 SWIVELS, CEMENTING MANIFOLD, DOWNHOLE Op. 19.05.2009 Dec. 07.08.2009 - TC 0916982 - TC 0916981

8479.89.90

8479.89.90 8479.89.90 8479.89.90

COMPONENTS, WORKOVER SYSTEM, SUBSEA OIL AND GAS WELL, being EITHER of the following: (a) tubing hanger overshot tools; (b) tubing hanger running tools Op. 08.05.2009 Dec. 31.07.2009 - TC 0915619 POSTFORMING MACHINES, programmable logic controlled Op. 20.04.2009 Dec. 10.07.2009 - TC 0913050 TUBING DISCONNECTS, OIL AND GAS WELL, two part, with or without EITHER of the following: (a) wiper dart release; (b) steel ball release Op. 07.04.2009 Dec. 03.07.2009 - TC 0911694 DEFUSING WRENCHES, EXPLOSIVE ORDNANCE, remote manipulation, having BOTH of the following: (a) power cartridges; (b) electronic initiation Op. 02.04.2009 Dec. 26.06.2009 - TC 0911257 PLUGS, ISOLATION, TUBING, OIL AND GAS WELL Op. 02.04.2009 Dec. 29.06.2009 - TC 0911156

8479.89.90 8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90

ROOF SUPPORT MACHINES, LONG WALL MINING, hydraulic Op. 01.04.2009 Dec. 19.06.2009 - TC 0911154 FOAM SKIMMERS, WASTE WATER, programmable logic controlled, including ALL of the following: (a) pump; (b) holding tank; (c) skimmer belt Op. 31.03.2009 Dec. 19.06.2009 - TC 0910797 ELECTRICAL CABLE TRAVERSING PAY OFF MACHINES Op. 30.03.2009 Dec. 19.06.2009 - TC 0910738

8479.89.90 8479.89.90

LINER HANGERS, EXPANDABLE, OIL AND GAS EXPLORATION AND PRODUCTION Op. 27.03.2009 Dec. 19.06.2009 - TC 0910430

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 WASHING PRESSES, consisting of ALL of the following: (a) inlet hoppers; (b) conveyors; (c) washing and press screws; (d) press frames; (e) bearing cages; (f) motors; (g) drain pans; (h) wash water headers Op. 27.03.2009 Dec. 12.06.2009 - TC 0910405 CAROUSELS, ROOF TILE, having BOTH of the following: (a) electronic controllers; (b) tile capacity NOT greater than 4 500 tiles Op. 16.04.2008 Dec. 21.05.2009 - TC 0917087 PRESSES, MOUNTING GEARS, hydraulic Op. 18.02.2009 Dec. 15.05.2009 - TC 0905599

8479.89.90

8479.89.90

8479.89.90

REPLICATION MACHINES, BLU-DISC (BD), including ALL of the following: (a) injection moulder; (b) sputterer; (c) coater; (d) press unit; (e) single AND/OR dual layer unit; (f) conveyor unit; (g) mould; (h) checker Op. 02.02.2009 Dec. 24.04.2009 - TC 0903376 MINE CLEARING MACHINES, track laying, motorised, having ALL of the following: (a) armour plating; (b) remote control; (c) flail and tiller unit or double flail unit Op. 29.01.2009 Dec. 24.04.2009 - TC 0902829 PHOTOVOLTAIC RECEIVERS ASSEMBLY LINE, programmable logic controlled, comprising ALL of the following: (a) roller dowels; (b) control boxes; (c) rotators; (d) flippers; (e) hoists; (f) testing stations; (g) testers; (h) fitters; (i) compressors; (j) clamps; (k) pressers; (l) conveyors; (m) cables; (n) robotic pick and place machines; (o) magazines/trays; (p) unloading machines; (q) loading machines; (r) cleaning machines; (s) feeders; (t) controllers Op. 27.01.2009 Dec. 24.04.2009 - TC 0902573

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 INSULATED GLASS PRODUCTION LINE, comprising ALL of the following: (a) washing machine; (b) tilt and/or transfer tables; (c) assembling press Op. 22.01.2009 Dec. 17.04.2009 - TC 0902213 POUCH DESICCANT INSERTERS Op. 30.12.2008 Dec. 27.03.2009 - TC 0845403

8479.89.90 8479.89.90

MODULES, PNEUMATIC CONVEYOR SYSTEM, being in line ash collection and volumetric feeding apparatus, incorporating ALL of the following: (a) inlet; (b) vent; (c) outlet dome valve; (d) electro-pneumatic control panel Op. 23.12.2008 Dec. 20.03.2009 - TC 0844983 FILTER ROD MAKERS, CIGARETTE Op. 04.05.2005 Dec. 16.09.2005 - TC 0505158

8479.89.90 8479.89.90

SORTERS, RECYCLABLE PACKAGING WASTE, optical, comprising BOTH of the following: (a) near infrared detector; (b) air ejector Op. 23.05.2005 Dec. 30.09.2005 - TC 0506112

8479.89.90

8479.89.90

SORTERS, RECYCLABLE PLASTIC BOTTLES, optical, comprising BOTH of the following: (a) full spectrum colour and near infra-red sensor; (b) air ejectors Op. 23.05.2005 Dec. 07.10.2005 - TC 0506113 PHARMACEUTICAL PLANT, capsule encapsulators and/or capsule sorters Op. 30.06.2005 Dec. 10.10.2005 - TC 0508477 DRYERS AND POLISHERS, CUTLERY, incorporating a UV lamp Op. 04.07.2005 Dec. 07.10.2005 - TC 0508690 WATER TEST BATHS, AEROSOL CONTAINER Op. 20.07.2005 Dec. 30.09.2005 TUMBLE POLISHERS, PHARMACEUTICAL CAPSULE Op. 22.07.2005 Dec. 07.10.2005 - TC 0509611 - TC 0509751

8479.89.90 8479.89.90 8479.89.90 8479.89.90

SECURITY ACCESS ENCLOSURES, plc, having ALL of the following: (a) narcotic and explosive detection and identification spectrometer; (b) electronic weight monitor and/or biometric fingerprint identifier; (c) metal detector and/or voice synthesiser Op. 28.07.2005 Dec. 21.10.2005 - TC 0509993 BRAKES, DISC, INDUSTRIAL, having a braking force of NOT less than 9 500 N per caliper Op. 03.08.2005 Dec. 14.10.2005 - TC 0510202 SEPARATORS, metal Op. 04.08.2005 Dec. 14.10.2005 - TC 0510206

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 GLASS SORTERS AND/OR SEPARATORS, plc, having BOTH of the following: (a) sensors; (b) vibrating feeders Op. 14.09.2005 Dec. 25.11.2005 - TC 0512189 BOTTLE CAP LINERS Op. 29.09.2005 Dec. 23.12.2005 - TC 0513210

8479.89.90 8479.89.90

SEPARATORS, WASTE PAPER FROM CARDBOARD, comprising ALL of the following: (a) feeder conveyors having a width NOT less than 1 800 mm and NOT greater than 2 100 mm; (b) feeder conveyors having a length NOT greater than 3 100 mm; (c) spiked disc dischargers containing NOT less than 6 discs and NOT greater than 12 discs Op. 29.09.2005 Dec. 23.12.2005 - TC 0513211 WASHERS AND DRYERS, PRESSED METALS AND/OR PARTS AND/OR PANELS Op. 23.12.2005 Dec. 17.03.2006 - TC 0513592 COMPENSATORS, HEAVE AND/OR MOTION Op. 14.10.2005 Dec. 06.02.2006 - TC 0514334

8479.89.90 8479.89.90 8479.89.90

SEPARATORS, THREE PHASE, GAS AND/OR SOLID AND/OR LIQUID, HYDROGEN SULFIDE OIL AND GAS WELL Op. 20.10.2005 Dec. 16.01.2006 - TC 0514782 DOOR ASSEMBLY LINE, plc, comprising ALL of the following: (a) transfer conveyor; (b) pressers; (c) formers; (d) assemblers; (e) riveters Op. 31.10.2005 Dec. 30.01.2006 - TC 0515069 ASSEMBLY CORE BUILDERS, TWIN TUBE AUTOMOTIVE EVAPORATORS, plc, comprising ALL of the following: (a) tube dispensers; (b) depressers; (c) tube guides Op. 03.11.2005 Dec. 23.01.2006 - TC 0515322 BUTT SPLICERS AND/OR UNWINDERS, LAMINATOR Op. 02.11.2005 Dec. 16.01.2006 - TC 0515324

8479.89.90

8479.89.90

8479.89.90 8479.89.90

WASHERS AND DRYERS, FLAT GLASS, with or without load and/or unload conveyors Op. 11.11.2005 Dec. 06.02.2006 - TC 0515978 WASTE SEPARATORS, single stream Op. 15.11.2005 Dec. 30.01.2006 - TC 0516024

8479.89.90 8479.89.90

WINDERS, EXTRUDED SEMI-RIGID SHEET, having ALL of the following: (a) accumulator; (b) outside roll diameter NOT greater than 2 m; (c) split roll capacity Op. 15.11.2005 Dec. 30.01.2006 - TC 0516025 FLOWLINE CONNECTION REMOTE OPERATED TOOLS, SUB SEA, having ANY of the following: (a) recovery frames; (b) docking skids; (c) control containers;

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(d) workshop cabins Op. 22.12.2005 8479.89.90 8479.89.90 8479.89.90 Dec. 17.03.2006 - TC 0516331 - TC 0516376 - TC 0516745

RAKES, LEACHING PLANT, THICKENER Op. 14.11.2005 Dec. 30.01.2006 DESCENT CONTROLLERS, FALL PROTECTION Op. 02.12.2005 Dec. 13.02.2006

PAINT PRIMING AND COATING LINES, TIMBER LINEAR PROFILE SHAPES, plc, comprising ALL of the following: (a) extruder primer coaters; (b) conveyors; (c) spray painters; (d) drying ovens Op. 06.12.2005 Dec. 03.03.2006 - TC 0516753 COLLAPSIBLE ALUMINIUM TUBE PRODUCTION LINE, comprising BOTH of the following: (a) polymerization ovens; (b) tube accumulators Op. 08.12.2005 Dec. 03.03.2006 - TC 0516762 SORTERS AND DETECTORS, OPTICAL Op. 08.12.2005 Dec. 03.03.2006 - TC 0516779

8479.89.90

8479.89.90 8479.89.90 8479.89.90

DRINK DISPENSERS, NOVELTY, being imitation petrol pumps Op. 14.12.2005 Dec. 10.03.2006 - TC 0516801 PRODUCTION LINE, GROWING MEDIA, comprising ALL of the following: (a) hoppers; (b) rewinders; (c) fillers; (d) sealers; (e) conveyors; (f) handlers; (g) palletisers Op. 11.01.2006 Dec. 24.03.2006 - TC 0602221 PLANT, PELLET, comprising ALL of the following: (a) valves; (b) blowers; (c) conveyors; (d) cyclones; (e) blenders; (f) tanks; (g) steam drums; (h) palletisers; (i) hoppers; (j) filters Op. 11.01.2006 Dec. 24.03.2006

8479.89.90

- TC 0602224

8479.89.90

WATER TREATERS, INVERSION AERATOR AND AGITATOR AND CIRCULATOR, having BOTH of the following: (a) NOT less than 2 axes; (b) power NOT greater than 250 watts Op. 16.01.2006 Dec. 10.04.2006 - TC 0602273 REEFERS AND/OR FURLERS, YACHT, hydraulic AND/OR electric Op. 01.03.2006 Dec. 12.05.2006 - TC 0604620 REEFERS AND/OR FURLERS, YACHT, manual Op. 01.03.2006 Dec. 19.05.2006 - TC 0604621

8479.89.90 8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 TRAPS, MAGNETIC, PULP MAKING OR RECONSTITUTING Op. 15.03.2006 Dec. 02.06.2006 - TC 0605330

CIRCULATORS, OIL, STEAM TURBINE, comprising ALL of the following: (a) storage tank; (b) centrifugal pumps; (c) control valves; (f) oil filters; (e) oil cooler Op. 23.03.2006 Dec. 16.06.2006 - TC 0605621 SETTERS AND CAPPERS, PLUG, AUTOMOTIVE BATTERY, programmable logic control Op. 28.03.2006 Dec. 23.06.2006 - TC 0605754 FILLERS AND/OR LEVELLERS, BATTERY, programmable logic control, single nozzle and /or multi nozzle, comprising ALL of the following: (a) filling heads; (b) transportation belts; (c) acid holding tanks; (d) pressure manifolds; (e) vacuum pumps and/or air ejectors Op. 28.03.2006 Dec. 23.06.2006 - TC 0605760 PARTS, CONTINUOUS PAINT LINE, STEEL STRIP, being ANY of the following: (a) uncoilers with hold down roll; (b) recoilers; (c) accumulator and accumulator columns; (d) outboard bearings Op. 07.04.2006 Dec. 30.06.2006 - TC 0606252 CARTS, ROLL, SCISSOR TYPE, CONTINUOUS STEEL STRIP PAINT LINE Op. 03.05.2006 Dec. 21.07.2006 - TC 0607766 DISCHARGERS, SCRAP AND/OR SAMPLE, CONTINUOUS PAINT LINE Op. 16.05.2006 Dec. 04.08.2006 - TC 0608556 CUTTERS AND/OR CRUSHERS, DEMOLITION, boom mounted Op. 25.05.2006 Dec. 11.08.2006 WRAPPERS, BELT, continuous steel strip paint line Op. 31.05.2006 Dec. 11.08.2006 CONTAINERS, CAPTURE, RODENT, battery operated Op. 30.06.2006 Dec. 22.09.2006 PRIMERS, AMMUNITION, having ALL of the following: (a) cavity checkers; (b) inserters; (c) crimpers; (d) depth checkers; (e) output of 250 primed shells per minute Op. 19.07.2006 Dec. 06.10.2006 PRESSES, SCREW, OIL, worm assembly Op. 25.07.2006 Dec. 13.10.2006 - TC 0609006 - TC 0609405 - TC 0611083

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90 8479.89.90 8479.89.90 8479.89.90

- TC 0612053 - TC 0612374

8479.89.90 8479.89.90

ASSEMBLERS AND JOINERS AND SEPARATORS AND UNSCREWERS, OIL AND GAS TUBULARS Op. 15.08.2006 Dec. 10.11.2006 - TC 0613542

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 STANDS, UNWIND, PAPER ROLL Op. 29.09.2006 Dec. 22.12.2006 - TC 0615150

SWEEPERS AND/OR CLEANERS AND/OR SCRUBBERS, motorised, ride on AND/OR walk behind Op. 06.09.2006 Dec. 24.11.2006 - TC 0616811 SYSTEMS, WORKOVER CONTROL, SUB SEA OIL AND GAS WELL, comprising ALL of the following: (a) hydraulic power units; (b) sub sea power & communication test units; (c) surface flow trees; (b) umbilicals; (e) riser joints; (f) emergency disconnect packages; (g) lower riser packages; (h) xmas tree running tools Op. 15.09.2006 Dec. 08.12.2006 - TC 0617294 PLATFORMS, VEHICLE LIFTING, comprising BOTH of the following: a) hydraulic lifts; b) hydraulic car body straighteners Op. 27.10.2006 Dec. 12.01.2007 - TC 0617864 SYSTEMS, DIRECT METAL DEPOSITION, comprising ALL of the following: (a) helium neon (HeNe) lasers; (b) closed loop controls; (c) graphical user interfaces; (d) powder feeders Op. 01.11.2006 Dec. 19.01.2007 - TC 0618075 DISPENSERS, INJECTION, comprising ALL of the following: (a) double wall outlet cones; (b) flow valves; (c) gas distributors Op. 08.11.2006 Dec. 19.01.2007 - TC 0618381 GATES AND/OR BOOTHS, SECURITY, pedestrian, electric, incorporating at least one glass panel Op. 10.11.2006 Dec. 02.02.2007 - TC 0618424 OUTLETS, STORAGE SILO, comprising ALL of the following: (a) shut off and maintenance valves; (b) fluidising bottoms; (c) pressure gas feeders Op. 10.11.2006 Dec. 02.02.2007 - TC 0618436 SYSTEMS, SOIL DENSIFICATION AND REINFORCEMENT, comprising ALL of the following: (a) vibroflots; (b) hydraulic power packs; (c) water jetting pumps Op. 21.11.2006 Dec. 02.03.2007 - TC 0618693 FITTERS, PLASTIC HANDLE Op. 28.11.2006 Dec. 02.03.2007 - TC 0618994 - TC 0619978

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90

CABINETS, CYANOACRYLATE FUMING Op. 19.12.2006 Dec. 09.03.2007

PARTS, SYNCHROTRON BEAMLINE, being mirror manipulators Op. 20.12.2006 Dec. 16.03.2007 - TC 0620001

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 SPRAYERS, TIMBER, LINEAR PROFILE SHAPES, programmable logic controlled (plc), comprising ALL the following: (a) scanners; (b) waste disposal conveyors; (c) spray heads; (d) extraction filters Op. 21.12.2006 Dec. 16.03.2007 - TC 0620122 LINES, LACQUER SPRAYING, TIMBER BOARD, programmable logic controlled, comprising ALL of the following: (a) calendar roller coaters; (b) conveyors; (c) curtain coaters; (d) ultra violet (U.V.) curers; (e) flash off tunnels Op. 21.12.2006 Dec. 16.03.2007 - TC 0620123 WINDERS, WIRES AND/OR YARNS Op. 19.01.2007 Dec. 13.04.2007 - TC 0701071

8479.89.90

8479.89.90 8479.89.90

LINE, GAS SUPPLY, C0-GENERATION POWER STATION, comprising ALL of the following: (a) valves; (b) electro welded linepipes; (c) ultrasonic gas meters Op. 02.02.2007 Dec. 30.04.2007 - TC 0701747 DEDUSTERS, TABLET AND/OR CAPSULE Op. 20.02.2007 Dec. 11.05.2007 - TC 0702723

8479.89.90 8479.89.90

LINERS, POT SHELL, ALUMINIUM SMELTING, comprising ALL of the following: (a) longitudinal travel cranes; (b) traverse cross travel trolleys; (c) clamping frames; (d) interchangeable compacting tools; (e) feeders with hoppers Op. 02.03.2007 Dec. 25.05.2007 - TC 0703295 MACHINES, SINGULATION Op. 02.03.2007 Dec. 25.05.2007 - TC 0703430

8479.89.90 8479.89.90

LINE, ORE PREPARATION AND ANALYSIS, computer logic controlled, having ALL of the following: (a) barcode scanners; (b) industrial robots; (c) conveyors; (d) moisture probes; (e) weighers; (f) drying ovens; (g) stainless steel sample trays; (h) jaw crushers; (i) splitters; (j) grinding and/or pulverising mills; (k) storage magazines; (l) dosing machines; (m) cleaning stations; (n) fusion furnaces; (o) labellers Op. 08.03.2007 Dec. 01.06.2007 - TC 0703685 COILERS, CORRUGATED PIPE Op. 26.03.2007 Dec. 15.06.2007 - TC 0704421

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 8479.89.90 AERATORS, TURBINE, submerged Op. 28.03.2007 Dec. 15.06.2007 REGULATORS, WINDOW Op. 30.03.2007 Dec. 15.06.2007 - TC 0704673 - TC 0704735 NOT greater greater than NOT greater than

HANDLERS, MATERIAL, having ALL of the following: (a) diesel engine output NOT less than 95 kW and than 210 kW; (b) action radius NOT less than 7 metres and NOT 20 metres; (c) operating weight NOT less than 20 tonnes and greater than 65 tonnes; (d) compact boom NOT greater than 12 metres; (e) loading stick NOT less than 2 metres and NOT 10 metres; (f) elevated cabin; (g) 4-point outriggers; (h) solid rubber tyres Op. 16.11.2006 Dec. 10.05.2007 HANDLERS, MATERIAL, having ALL of the following: (a) diesel engine output NOT less than 95 kW and than 210 kW; (b) action radius NOT less than 7 metres and NOT than 20 metres; (c) operating weight NOT less than 20 tonnes and greater than 65 tonnes; (d) compact boom NOT greater than 12 metres; (e) loading stick NOT less than 2 metres and NOT 10 metres; (f) elevated cabin; (g) crawler mounted Op. 16.11.2006 Dec. 10.05.2007 PRESSES, HYDRAULIC, WOOD AND/OR PAPER Op. 22.05.2007 Dec. 10.08.2007

- TC 0705893 NOT greater greater NOT greater than

8479.89.90

- TC 0705894 - TC 0707614

8479.89.90 8479.89.90

SCRAPERS, SEWAGE OR WASTEWATER TREATMENT, comprising ALL of the following: (a) scraper flights; (b) chains; (c) sprockets; (d) gear motor drives Op. 13.06.2007 Dec. 31.08.2007 - TC 0709010 AERATORS, SURFACE, WASTEWATER TREATMENT Op. 03.07.2007 Dec. 14.09.2007 - TC 0709464

8479.89.90 8479.89.90

DISPENSING MACHINES, SEMICONDUCTOR FLUID AND/OR ADHESIVE AND/OR PROTECTIVE COATING LIQUID AND/OR PASTE, programmable logic controlled Op. 28.08.2007 Dec. 09.11.2007 - TC 0713585 DISPENSING HEADS, SEMICONDUCTOR FLUID AND/OR ADHESIVE AND/OR PROTECTIVE COATING LIQUID AND/OR PASTE, programmable logic controlled Op. 28.08.2007 Dec. 09.11.2007 - TC 0713587 RIGS, HYDROSTATIC PRESSURE TEST, WATER PIPE Op. 31.08.2007 Dec. 16.11.2007 - TC 0713868

8479.89.90

8479.89.90

8479.89.90

CLEANING MACHINES, FOOD FORMING DRUM, MEAT AND/OR VEGETABLE

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


FORMERS Op. 04.09.2007 8479.89.90 Dec. 09.11.2007 - TC 0714097

SANDER DUST MACHINES, TRANSFER SCREW CONVEYING, comprising ALL of the following: (a) metering screws; (b) motors; (c) metering bins; (d) dust burners; (e) rotary feeders; (f) blowers; (g) cooling fans; (h) burners; (i) venturi Op. 17.09.2007 Dec. 23.11.2007 - TC 0715340 PHARMACEUTICAL MANUFACTURING PROCESSING LINE, programmable logic controlled, comprising ALL of the following (a) fluid bed dryers; (b) coating machines; (c) high shear granulators; (d) conical wet mills; (e) fluidized bed processors; (f) wash water preparers; (g) dry granule handlers Op. 25.09.2007 Dec. 14.12.2007 - TC 0716255 WASHING MACHINES, TROLLEYS AND/OR CARTS, FOOD AND/OR CATERING Op. 06.09.2007 Dec. 30.11.2007 - TC 0716485 LOADERS, DESICCANT Op. 10.10.2007 Dec. 21.12.2007 - TC 0717100

8479.89.90

8479.89.90 8479.89.90 8479.89.90

COATERS, GLASS, CHEMICAL VAPOUR DEPOSITION, comprising ALL of the following: (a) tin compound feeders; (b) gas precursor feeders; (c) pollution controllers and processors; (d) hydrofluoric acid feeders; (e) beam coaters; (f) oil heaters and coolers Op. 10.10.2007 Dec. 29.01.2008 - TC 0717248 ASSEMBLY LINE, MOTOR VEHICLE BATTERY LID, comprising BOTH of the following: (a) flame arresters insertion; (b) battery handles insertion Op. 24.10.2007 Dec. 16.01.2008 - TC 0718128 BOTTLE DRAINAGE MACHINES, SPARKLING WINE, programmable logic controlled Op. 30.10.2007 Dec. 31.01.2008 - TC 0718551 PIPE LINING MACHINES, CEMENT MORTAR, having a pipe lining diameter capacity NOT greater than 2.5 m Op. 09.11.2007 Dec. 13.02.2008 - TC 0719098 WOOD DIPPING MACHINES, FUNGICAL COATING Op. 20.11.2007 Dec. 01.02.2008 - TC 0719754

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90

LENS MANUFACTURING AND/OR PROCESSING LINE, comprising ALL of the following: (a) grinders and/or generators; (b) polishers;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) chillers; (d) blockers (e) engravers; (f) analysers Op. 26.11.2007 8479.89.90

Dec. 08.02.2008

- TC 0720092

TAPING AND/OR REWINDING LINE, comprising ALL of the following: (a) pay-off stands; (b) unwinding dancers; (c) support and/or guiding rollers; (d) taping heads; (e) haul off capstans Op. 27.12.2007 Dec. 14.03.2008 - TC 0721999 MANIPULATORS, WELDING HEAD, COLUMN AND BOOM Op. 18.01.2008 Dec. 04.04.2008 - TC 0801034

8479.89.90 8479.89.90

TEST TREES, SUBSEA OIL AND/OR SUBSEA GAS WELLS, whether or not including flowheads, comprising ALL of the following: (a) hydraulic control systems; (b) lubricator valves; (c) slick joints; (d) gauge carriers; (e) latches Op. 24.01.2008 Dec. 04.04.2008 - TC 0801435 MILLING MACHINES, incorporating three dimensional scanners, with or without scanning sensor Op. 23.04.2007 Dec. 14.02.2008 - TC 0801937 PHARMACEUTICAL DISPENSING MACHINES Op. 13.02.2008 Dec. 18.04.2008 PRESSES, EYELET, pneumatic Op. 08.04.2008 Dec. 20.06.2008 SORTERS, AEROSOL CAP Op. 25.02.2008 Dec. 02.05.2008 - TC 0802471 - TC 0802710 - TC 0803138

8479.89.90

8479.89.90 8479.89.90 8479.89.90 8479.89.90

DISCHARGERS, DEWATERED CONCENTRATES, ORE PROCESSING FILTERS, comprising ALL of the following: (a) top and bottom chambers; (b) top and bottom gates; (c) lifting jacks; (d) support structures Op. 26.02.2008 Dec. 09.05.2008 - TC 0803140 CONTROLLERS, WELLHEAD PRESSURE, OIL OR GAS Op. 16.04.2008 Dec. 04.07.2008 DEBRIS CAPS, SUBSEA, OIL AND GAS WELL Op. 17.04.2008 Dec. 11.07.2008 - TC 0804339 - TC 0804348

8479.89.90 8479.89.90 8479.89.90

SYSTEMS, WORKOVER CONTROL, SUBSEA, OIL AND GAS WELL, electronic controlled, comprising ALL of the following: (a) hydraulic power units; (b) stabplates; (c) umbilicals; (d) umbilical sheaves; (e) umbilical workover reels Op. 17.04.2008 Dec. 11.07.2008 - TC 0804353 DISTRIBUTORS, AIR, EFFLUENT AND/OR WASTEWATER REACTOR, having BOTH of the following: (a) aeration header;

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(b) air lift mixer Op. 21.04.2008 8479.89.90 8479.89.90 8479.89.90 8479.89.90 Dec. 11.07.2008 - TC 0804747 - TC 0804868 - TC 0805148 - TC 0805861

HORNS, AIR, having 12 OR 24 volt air compressors Op. 22.04.2008 Dec. 11.07.2008 TOOLS, RUNNING AND RETRIEVAL, SUBSEA, universal Op. 03.04.2008 Dec. 13.06.2008 RAIL CLAMPS, BRAKE, hydraulic Op. 30.04.2008 Dec. 18.07.2008

TRACTORS, CRAWLER, PIPELINE, comprising ALL of the following: (a) umbilical winches; (b) controllers; (c) cameras Op. 05.05.2008 Dec. 01.08.2008 - TC 0806481 MACHINES, SWEEPING, PEDESTRIAN PUSHED AND CONTROLLED, having BOTH of the following: (a) battery powered motor driven brushes and/or manual drives; (b) removable hopper Op. 22.05.2008 Dec. 08.08.2008 - TC 0809407 SWEEPERS, SUCTION, ride in, having ALL of the following: (a) connectible four-wheel steering; (b) sweeping width NOT greater than 2 500 mm; (c) dirt hopper capacity NOT greater than 1.85 m3; (d) transport mode NOT greater than 50 km per hour; (e) outer turning radius NOT greater than 3 500 mm; (f) width NOT greater than 1 300 mm; (g) height NOT greater than 1 995 mm Op. 06.06.2008 Dec. 01.09.2008 - TC 0811645 MACHINES, CLEANING, GLASS MOULD, programmable logic controlled, comprising ALL of the following: (a) conveyors; (b) immersion tanks and/or spraying tanks and/or acid tanks; (c) baskets; (d) basket feeders; (e) frames; (f) lifters; (g) clean air circulator; (h) drying oven; (i) racks; (j) connection pipes; (k) tank heaters Op. 18.06.2008 Dec. 01.09.2008 - TC 0813299 SYSTEM, IN-LINE WEIGHING AND METAL DETECTION, comprising BOTH of the following: (a) check weigher; (b) metal detector Op. 18.06.2008 Dec. 08.09.2008 - TC 0813445 CEMENT HEADS, OIL AND GAS WELL, single OR double plug, comprising ALL of the following: (a) valves; (b) manifold; (c) seals; (d) pump port; (e) quick coupler Op. 23.06.2008 Dec. 08.09.2008 - TC 0814000

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 DREDGERS, precision, profiling, having BOTH of the following: (a) plate handling frame; (b) grouting module Op. 25.06.2008 Dec. 12.09.2008 - TC 0814430 WASTE RECYCLYING PLANT, having ALL of the following: (a) conveyors; (b) hoppers; (c) lifts; (d) magnets; (e) pumps; (f) separators; (g) shredders; (h) blenders; (i) tanks Op. 16.07.2008 Dec. 10.10.2008 - TC 0819314 LINERS, OPENHOLE, OIL WELL AND GAS WELL, comprising ALL of the following: (a) solid expandable liner joints; (b) launcher assemblies; (c) anchor hanger assemblies; (d) expamsion assemblies; (e) connection sleeves; (f) lift nubbins; (g) bolster frames Op. 28.07.2008 Dec. 17.10.2008 - TC 0823270 MAGNETIC PARTICLE PROCESSING MACHINES, programmable logic controlled, with or without ANY of the following: (a) magnet heads; (b) plates; (c) tip combs Op. 31.07.2008 Dec. 24.10.2008 - TC 0824233 INSULATING GLASS LINE, programmable logic controlled, comprising ALL of the following: (a) loading stations; (b) transport stations; (c) inspection stations; (d) mounting stations; (e) washing and drying stations; (f) sealing robots; (g) robot super spacers; (h) presses; (i) measurers Op. 06.08.2008 Dec. 31.10.2008 - TC 0825245 POWDER COATING LINE, comprising BOTH of the following: (a) spray booth; (b) ultra violet curing oven Op. 14.08.2008 Dec. 07.11.2008 - TC 0826501 ASSEMBLERS, VALVE ACTUATOR, programmable logic controlled, comprising ALL of the following: (a) centrifugal bowls; (b) hopper systems; (c) double feeder tracks; (d) double head pick and place unit; (e) optical inspection unit; (f) vibrating bowl; (g) belt conveyor Op. 04.09.2008 Dec. 28.11.2008 - TC 0829703

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 TRACTORS, WIRELINE, OIL AND GAS EXPLORATION, conveyancing, downhole, gauge size NOT less than 5 cm but NOT greater than 26 cm Op. 03.10.2008 Dec. 12.01.2009 - TC 0834252 COMPARTMENT RACKS, GLASS SHEET STORAGE, moveable Op. 22.10.2008 Dec. 16.01.2009 METALLISERS, vacuum depositor Op. 23.10.2008 Dec. 16.01.2009 - TC 0836601 - TC 0836683

8479.89.90 8479.89.90 8479.89.90

INSULATED GLASS SHEET PRODUCTION LINE, comprising ALL of the following: (a) washing and drying station; (b) frame mounting station; (c) gas filling press; (d) butyl coating machine; (e) spacer feed-in machine; (f) vacuum suction bridge Op. 03.11.2008 Dec. 30.01.2009 - TC 0838132 DESICCANT FILLING MACHINES, BENT SPACER FRAMES, INSULATED GLASS Op. 03.11.2008 Dec. 23.01.2009 - TC 0838256 INSULATED GLASS SHEET PRODUCTION LINE, including ALL of the following: (a) inlet station; (b) washing and drying station; (c) frame mounting station; (d) assembly and press station; (e) storing stations Op. 07.11.2008 Dec. 30.01.2009 - TC 0838999 ANOLYTE AND CATHOLYTE PRODUCTION SYSTEM, including ALL of the following: (a) electricals enclosure; (b) hydraulics enclosure; (c) pumps; (d) monitoring equipment Op. 12.11.2008 Dec. 06.02.2009 - TC 0839573 COOLERS AND/OR WARMERS, FOOD AND BEVERAGE, comprising ALL of the following: (a) insulated; (b) 12 volt DC AND/OR dual voltage; (c) carry handles; (d) volume NOT greater than 34 litres Op. 22.04.2004 Dec. 25.11.2008 - TC 0840537 MOTOR VEHICLE OPERATION SYSTEM, including ALL of the following: (a) steering and/or accelerator and/or brake and/or transmission controls; (b) secondary controls, including horn and/or indicators and/or hazard warning lights and/or wipers and/or high and low beam; (c) vehicle to system interfaces; (d) central processing units; (e) information displays; (f) electric motors Op. 24.11.2008 Dec. 27.02.2009 - TC 0840875 LAMINATED GLASS PRE NIP (ROLL LAMINATOR), programmable logic control, comprising ALL of the following: (a) infeed conveyors;

8479.89.90 8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(b) heating zones; (c) roller presses; (d) off load conveyor with tilt table; (e) switch and control units Op. 10.12.2008 Dec. 06.03.2009 8479.89.90

- TC 0843279

MODULES, PNEUMATIC CONVEYOR SYSTEM, being in line ash collection and volumetric feeding apparatus, incorporating ALL of the following: (a) inlet; (b) vent; (c) outlet dome valve; (d) electro-pneumatic control panel Op. 23.12.2008 Dec. 20.03.2009 - TC 0844983 POUCH DESICCANT INSERTERS Op. 30.12.2008 Dec. 27.03.2009 - TC 0845403

8479.89.90 8479.89.90 8479.89.90

SWIMMING POOL CLEANING MACHINES, underwater, self-propelled Op. 29.08.2007 Dec. 19.02.2009 - TC 0905679 PARKING STATION MANAGEMENT SYSTEM, comprising all of the following: (a) central data station; (b) intercom master stations; (c) data net line driver; (d) level counter; (e) loop detectors; (f) entry and exit control terminals; (g) hand cashier terminals; (h) entry and exit barriers but not including machines or parts when imported separately Op. 26.11.1992 Dec. 23.04.1993 - TC 9210472 CLEANING MACHINES, compact disc (CD) Op. 14.05.1993 Dec. 10.09.1993 - TC 9304880

8479.89.90 8479.89.90 8479.89.90

LAMINATING MACHINES, plastic security and identification cards Op. 02.06.1993 Dec. 24.09.1993 - TC 9305131 ACTUATORS, linear thermo-electric, push or pull types, having a nominal length of stroke NOT exceeding 12 mm Op. 05.05.1993 Dec. 26.08.1993 - TC 9305535 SWEEPING MACHINES, ride on, petrol, diesel or electric powered having BOTH of the following: (a) a sweeping path of in between 120 cm and 160 cm; (b) a hopper capacity of 0.25 cu m or greater but NOT exceeding 0.65 cu m Op. 09.07.1993 Dec. 08.11.1993 - TC 9306863 PRESSES, mechanical cutting, capable of producing shaped components in soft and semi rigid materials, but NOT including metal cutting presses Op. 12.08.1993 Dec. 30.11.1993 - TC 9307384 ACTUATORS, linear, electro-hydraulic, having BOTH of the following: (a) 240 V/50 Hz electric motor, integral hydraulic pump and hydraulic piston ALL housed in an aluminium oil bath casing; (b) key secured by-pass valves Op. 19.01.1993 Dec. 30.04.1993 - TC 9308017 TENSIONING MACHINES, being machines that stretch studs or bolts by the application of hydraulic power Op. 01.02.1993 Dec. 20.05.1993 - TC 9308155

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 BOLT TENSIONERS, hydraulic Op. 03.02.1993 Dec. 17.06.1993 - TC 9308176

SWEEPING MACHINES, self propelled, single seat, ride on, incorporating one or more brushes, having ALL of the following: (a) maximum hopper capacity not exceeding 200 litres; (b) maximum sweeping width with side brushes not exceeding 1.5 metres; (c) maximum travelling speed not exceeding 12 kph; and (d) sweeping capacity not exceeding 10,000 sq metres per hour Op. 08.03.1993 Dec. 16.09.1993 - TC 9308685 BIRD SCARERS, LPG operated Op. 03.09.1993 Dec. 24.12.1993 - TC 9310089

8479.89.90 8479.89.90

PUMP, breast, mains or battery powered, automatic operation with a physiologically natural sucking rhythm Op. 09.09.1993 Dec. 31.12.1993 - TC 9310156 STRINGING MACHINES, tennis racquet, squash racquet or badminton racquet Op. 15.10.1993 Dec. 09.02.1994 - TC 9310962 CRIMPING MACHINES, modular connector Op. 03.11.1993 Dec. 04.03.1994 PULLERS, hydraulic, whether or not in sets Op. 22.11.1993 Dec. 17.03.1994 - TC 9312732 - TC 9313310

8479.89.90

8479.89.90 8479.89.90 8479.89.90

MICROPIPETTES, continuously adjustable, having a capacity of up to 10 ml Op. 07.01.1994 Dec. 29.04.1994 - TC 9401231 CONNECTOR DEVICE, being a metal link between a safety harness, lanyard, and a horizontal safety line, allowing the user to travel the entire length of a safety line and through the supports of that line without having to unclip and reclip to pass the supports Op. 19.01.1994 Dec. 29.04.1994 - TC 9401390 REELING MACHINES, electrical cable, automatic despatch Op. 28.01.1994 Dec. 23.05.1994 - TC 9402077 SWEEPING MACHINES, ride on, LPG powered, having both of the following: (a) a sweeping path of in between 120 cm and 160 cm; (b) a hopper capacity of 0.25 cu m or greater but NOT exceeding 0.65 cu m Op. 14.02.1994 Dec. 09.09.1994 - TC 9402247 SWEEPING MACHINES, self propelled, pedestrian controlled Op. 23.02.1994 Dec. 29.06.1994 - TC 9402424 REPLICATION MACHINES, compact disc, capable of performing ANY combination of the following functions: (a) injection moulding; (b) sputtering (vacuum deposition); (c) coating; (d) checking Op. 05.04.1994 Dec. 27.07.1994 - TC 9403995

8479.89.90

8479.89.90 8479.89.90

8479.89.90 8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 BURNISHERS, pedestrian operated, self propelled, battery operated, units burnish at a speed of 2 000 rpm or greater Op. 28.06.1994 Dec. 21.10.1994 - TC 9405381 DISPENSING MACHINES, LIQUID, fully automatic, capable of dispensing solder paste or viscous liquid epoxies to substrates, circuit boards and flexible circuits incorporating ALL of the following: (a) simultaneous micro processor control of the X, Y and Z axes of the robotic positioning system; (b) a rotary displacement valve; (c) a through conveyor to make the machine compatible to pick and place machines and the flow line production of printed circuit boards Op. 14.11.1994 Dec. 03.03.1995 - TC 9409053 CHLORINE DIOXIDE GENERATOR Op. 07.12.1994 Dec. 22.03.1995 - TC 9500078

8479.89.90

8479.89.90 8479.89.90 8479.89.90

AIR HORNS, compressed air, with rechargeable cannister Op. 26.12.1994 Dec. 31.03.1995 - TC 9500444 CONVERSION KITS, power window, converting manual operation to power system, comprising ALL of the following: (a) 2 or 4 electric window mechanism; (b) 2 to 7 power window switches and/or switch mountings; (c) wiring harnesses; (d) 2 to 4 round caps to cover hole in door trim; (e) grommets and plastic tubes Op. 29.03.1995 Dec. 30.06.1995 - TC 9504625 MASSAGE EQUIPMENT, RECLINER CHAIR AND/OR BED, electro-mechanical, being BOTH of the following: (a) ten (10) motors with backing plate and wiring harness; (b) control unit Op. 04.04.1995 Dec. 29.09.1995 - TC 9504732 DISPENSING MACHINES, ICE AND BEVERAGES, having BOTH of the following: (a) a paddle wheel to transport ice; (b) a cold plate to chill beverages Op. 12.04.1995 Dec. 20.10.1995 - TC 9504896 NEEDLES, inflating, basketball Op. 05.07.1995 Dec. 07.07.1995 - TC 9508004

8479.89.90

8479.89.90

8479.89.90 8479.89.90

DRILLING MACHINES, PAPER AND/OR PLASTIC, electric, having ALL of the following: (a) four OR more drilling heads; (b) the drilling heads driven by a spline shaft; (c) a moveable drilling table Op. 23.08.1995 Dec. 08.12.1995 - TC 9510017 DAMPENERS, pulsation, NOT being gas or air systems dampeners. Op. 01.08.1995 Dec. 26.09.1995 - TC 9510163 ACCUMULATORS, piston type, complying with AS 1210 for working pressure of 21 mPa or 25 mPa capable of working at a compression ratio of above 6:1 between maximum and minimum pressure Op. 11.09.1995 Dec. 12.01.1996 - TC 9510423

8479.89.90 8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 ACCUMULATORS, BLADDER, having a capacity of between 0.5L to 54L inclusive and an operating pressure of 50 000 kPa and above conforming to AS 1210 Op. 22.09.1995 Dec. 12.01.1996 - TC 9510766 DEGREASING, WASHING AND DRYING MACHINES, AUTOMOTIVE GLASS, having ALL of the following: (a) horizontal conveyance of glass sheet; (b) vertically opposed cylindrical brushes; (c) heated air knife drying process; (d) continuous cycle interval NOT slower than 15 s Op. 12.10.1995 Dec. 26.04.1996 - TC 9511202 FILLING MACHINE, CUSHION Op. 18.10.1995 Dec. 29.01.1996 - TC 9511353

8479.89.90

8479.89.90 8479.89.90

COATING AND LAMINATING MACHINE, solventless, with a coating width up to a maximum 1 200 mm Op. 24.11.1995 Dec. 15.03.1996 - TC 9512956 SWEEPING MACHINES, ride-on, powered by petrol or diesel fuel, having BOTH of the following: (a) sweeping path of EITHER of the following: (i) 168 cm with single side broom; (ii) 198 cm with dual side brooms; (b) hopper of 0.765 cu m Op. 04.01.1996 Dec. 29.04.1996 - TC 9601295 STEAM GENERATING HUMIDIFIERS, electric, having an output of 1 kg/h OR greater but NOT exceeding 90 kg/h Op. 16.01.1996 Dec. 29.04.1996 - TC 9601757 WASHING MACHINE, FLEXIBLE SCOPE, having ALL of the following functions: (a) washing; (b) disinfecting by use of concentrated glutaraldehyde solution; (c) connection points to enable internal channels of flexible scopes to be separately irrigated; (d) leakage testing of flexible scopes; (e) sterile water rinse; (f) self disinfection of machine and self cleaning of water filter Op. 08.02.1996 Dec. 24.05.1996 - TC 9603071 AERATORS, subsurface, incorporating EITHER a ceramic OR membrane diffuser Op. 28.02.1996 Dec. 21.06.1996 - TC 9603991 WASHING MACHINES, VEHICLE, having ALL of the following: (a) aluminium gantry; (b) frequency controlled gantry drive motors; (c) fail safe vehicle positioning; (d) activation by either coin, pin pad or combination of both; (e) remote fault monitoring; (f) maximum vehicle washing height of 2.1 m; (g) electrically driven polyethylene bristle filament being one (1) gravity weighted horizontal brush, and, four (4) vertical brushes Op. 19.09.1996 Dec. 22.11.1996 - TC 9610867 SCRUBBING MACHINES, self propelled, single seat, ride on, having two (2) roller or disc brushes and one (1) rubber squeegee Op. 31.01.1997 Dec. 13.05.1997 - TC 9700866

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 8479.89.90 SCRUBBING MACHINES, electric powered, pedestrian operated Op. 04.02.1997 Dec. 11.04.1997 - TC 9700999 SCRUBBERS, FLOOR, having ALL of the following: (a) minimum cleaning path of 67 cm; (b) minimum solution tank capacity of 90 L; (c) minimum recovery tank capacity of 90 L; (d) liquid pick up via squeegee and vacuum fan Op. 06.02.1997 Dec. 15.05.1997

- TC 9701109

8479.89.90

PACKERS, OIL AND GAS WELL, but NOT including inflatable grouting packers Op. 07.02.1997 Dec. 02.05.1997 - TC 9701154 ACCESSORIES, PACKER, OIL AND GAS WELL, being ANY of the following: (a) moulded seal; (b) crossover adaptor; (c) bore seal no-go locator; (d) moulded seal retaining ring; but NOT including accessories for inflatable grouting packers Op. 07.02.1997 Dec. 02.05.1997 - TC 9701155 ACCESSORIES, PACKERS, OIL OR GAS WELL, downhole, being ANY of the following: (a) sealbore and millout extensions; (b) polished bore receptacles and seal stingers; (c) overshot tubing seal dividers; (d) seal stingers, including locators and guides; (e) catcher subs; (f) tubing safety joints; (g) tubing or casing patches; (h) tubing hangers; (i) landing nipple liner hangers; (j) casing nipples; (k) liner hangers Op. 06.03.1997 Dec. 09.05.1997 - TC 9701993 SWEEPING MACHINES, self propelled, single seat, ride on, having ALL of the following: (a) maximum hopper capacity NOT exceeding 200 L; (b) maximum sweeping width with side brushes NOT exceeding 1.6 m; (c) maximum travelling speed NOT exceeding 16 kph; (d) incorporating one or more brushes Op. 11.03.1997 Dec. 16.05.1997 - TC 9702068 REMOTE CONTROL SYSTEMS, VEHICLE, WORK CLASS, UNDERWATER, having ANY of the the following: (a) free swimming remotely operated vehicle; (b) launch and recoverer; (c) surface controller, whether or not housed in a cabin; (d) workshop cabin; (e) tetherer Op. 29.04.1997 Dec. 11.07.1997 - TC 9703411 WASHING MACHINES, VEHICLE, TUNNEL, having ALL of the following: (a) push button or electronic card reader operated; (b) electronic microprocessor control with fault monitor; (c) alignment aid; (d) electronic variable speed controlled conveyor; (e) conveyor chain fitted with frictionless sliding blocks; (f) chemical pre rinse; (g) foam wash; (h) rim spray; (i) electronically controlled wheel wash synchronised with

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


conveyor speed; (j) short wash tunnel with linear roof and side brushes; (k) dry aid; (l) waxer; (m) contour following double dryer Op. 26.05.1997 Dec. 01.08.1997 - TC 9704656 8479.89.90 WASHING MACHINES, VEHICLE, ROLLOVER, having ALL of the following: (a) push button or electronic card reader operated; (b) maximum drive through height 2.75 m; (c) electronic microprocessor control; (d) chemical pre rinse; (e) foam wash; (f) all round pressure wash; (g) under floor wash with side pressure wash; (h) one (1) contour following electronically controlled horizontal brush; (i) two (2) contour following electronically controlled vertical brushes; (j) two (2) infra red controlled wheel wash brushes; (k) diagnostic error analysis AND recording; (l) contour following 2.2 kW roof nozzle blower dryers; (m) angled 3 kW side nozzle blower dryers; (n) waxer For the purposes of this order, ALL measurements have a tolerance of + OR - 5% Op. 06.08.1997 Dec. 16.10.1997 - TC 9706875 TYRE CHANGERS, power operated Op. 16.10.1997 Dec. 12.02.1998 - TC 9709215

8479.89.90 8479.89.90

MOUNTING PLATES, CLOSED CIRCUIT TELEVISION CAMERAS, motorised, remote control operated, pan and tilt OR scanner Op. 30.10.1997 Dec. 12.01.1998 - TC 9709590 WASHING AND/OR POLISHING MACHINES, VEHICLE, with OR without dryers but NOT including hand held machinery Op. 08.12.1997 Dec. 27.02.1998 - TC 9710813 STERILIZATION SYSTEMS, MEDICAL INSTRUMENT, micro processor controlled, having ALL of the following: (a) controlled input of chemical sterilant; (b) audio/visual indication of cycle status; (c) diagnostic and process print-out Op. 18.02.1998 Dec. 24.04.1998 - TC 9801465 LUBRICATORS, GREASE OR OIL, CENTRALISED, having ALL of the following: (a) single outlet; (b) reciprocating output pump; (c) reservoir Op. 19.02.1998 Dec. 24.04.1998 - TC 9801497 PIPETTES, LABORATORY, multi channel, hand held, adjustable volume, graduated in microlitre quantities Op. 25.02.1998 Dec. 15.05.1998 - TC 9801688 AERATORS, AQUACULTURE, paddlewheel, having ALL of the following: (a) stainless steel OR HDPE vertical rotating paddlewheels; (b) horizontal floatation tubes; (c) bi-directional reducing gearbox with speed of 100 rpm; (d) motor power rating NOT greater than 1.5 kW Op. 02.03.1998 Dec. 15.05.1998 - TC 9801815

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 LACING OR JOINING MACHINES, CONVEYOR BELTING, being EITHER pneumatic OR hand cranked OR manual hammer operation Op. 13.03.1998 Dec. 22.05.1998 - TC 9802260 OILWELL DRILLING MUD PLANT, having ALL of the following: (a) mud cleaner; (b) liquid storage silos interconnected by pipes; (c) mixing hoppers; (d) mixing and treatment tanks; (e) centrifugal mixing and transfer pumps; (f) drum decanting pits; (g) storage tanks; (h) electrical distribution and control panel; (i) with OR without generator Op. 21.04.1998 Dec. 03.07.1998 - TC 9803367 DOWN HOLE CEMENTING EQUIPMENT, being EITHER of the following: (a) float shoes; (b) float collars Op. 01.05.1998 Dec. 17.07.1998 - TC 9803641 TOILETS, CARAVAN OR MOTOR HOME, having a removable waste tank Op. 25.05.1998 Dec. 31.07.1998 - TC 9804394 PIPETTES, LABORATORY, HAND HELD, fixed volume, quantity 30 microlitres Op. 05.06.1998 Dec. 14.08.1998 - TC 9804853 LUBRICATORS, ROLLER AND BALL BEARING Op. 16.06.1998 Dec. 28.08.1998 - TC 9805173

8479.89.90

8479.89.90

8479.89.90 8479.89.90

8479.89.90 8479.89.90

DISPENSING MACHINES, PAINT TINT, COMPUTER CONTROLLED, capable of storing up to 32 tint containers Op. 01.07.1998 Dec. 11.09.1998 - TC 9805747 DENTAL HANDPIECE LUBRICATING AND CLEANING MACHINES, PNEUMATIC Op. 02.07.1998 Dec. 11.09.1998 - TC 9805780 CYTOLOGY CELL COLLECTION PREPARATION INSTRUMENT, having ALL of the following: (a) integrated control; (b) liquid crystal display; (c) keyboard operation; (d) monolayer cell presentation Op. 12.08.1998 Dec. 30.10.1998 - TC 9807164 CRUSHING MACHINES, ICE Op. 03.09.1998 Dec. 13.11.1998 - TC 9807846 - TC 9808703 - TC 9808846

8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90 8479.89.90 8479.89.90

LANE MAINTENANCE MACHINES, TENPIN BOWLING Op. 28.09.1998 Dec. 04.12.1998 PLUGS, PRESSURE TEST, OIL AND GAS TUBING Op. 30.09.1998 Dec. 11.12.1998

ENCAPSULATING MACHINES, SOFT ELASTIC GELATIN CAPSULE Op. 13.11.1998 Dec. 22.01.1999 - TC 9810053 DEHUMIDIFIER, ROTATING WHEEL, DRY DESSICANT TYPE, having continuous duty and simultaneous regeneration of the drying rotor Op. 26.11.1998 Dec. 05.02.1999 - TC 9810358 SHAVING MACHINES, ICE

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Op. 22.01.1999 8479.89.90 Dec. 07.04.1999 - TC 9900629 SPIRAL PLATERS, comprising ALL of the following: (a) pipetter; (b) rotating turntable; (c) electronic settings Op. 11.02.1999 Dec. 30.04.1999

- TC 9901061

8479.89.90

SWEEPERS, SELF PROPELLED, having BOTH of the following: (a) hopper capacity greater than 80 L; (b) cleaning path greater than 700 mm but less than 1 600 mm Op. 09.04.1999 Dec. 02.07.1999 - TC 9902464 ASSEMBLY MACHINES, PRINTED CIRCUIT BOARD, having ALL of the following: (a) programmable controller; (b) sequential component placement; (c) surface mounting of components Op. 15.07.1999 Dec. 01.10.1999 - TC 9905293 DRILLING AND BOLTING RIGS, ROCK, hydraulic, self propelled, having ALL of the following: (a) three positional drill steel support; (b) magazine capacity of NOT less than 8 bolts and NOT greater than 12 bolts; (c) boom extension NOT less than 1 200 mm Op. 16.07.1999 Dec. 01.10.1999 - TC 9905321 DRILLING AND BOLTING RIGS, ROCK, hydraulic, self propelled, having BOTH of the following: (a) drill steel support with rod changer; (b) minimum drilling capacity of 36 m Op. 16.07.1999 Dec. 01.10.1999 - TC 9905323 SLIDES, COIN OR TOKEN, PUSH PULL, minimum three coin OR token capacity, non-electrical Op. 23.08.1999 Dec. 29.10.1999 - TC 9906318 PARKING STATION MANAGEMENT SYSTEMS, comprising ALL of the following: (a) car park barriers; (b) parking entry and exit columns; (c) cashier stations; (d) payment machines; (e) door and gate openers; (f) central management computer Op. 15.11.1999 Dec. 04.02.2000 - TC 9908677 SECURITY GATES, PEDESTRIAN, 240 V, comprising BOTH of the following: (a) reverse action; (b) visual and audible alarm signals Op. 17.05.2000 Dec. 04.08.2000 - TC 0004792 BATHS, HYDROTHERAPY, having BOTH of the following: (a) adjustable height; (b) in-built control panel Op. 14.03.2001 Dec. 01.06.2001 - TC 0102348 FILM COATERS, PHARMACEUTICAL TABLET, computer controlled Op. 31.08.2001 Dec. 16.11.2001 - TC 0107721

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.89.90 DEMOLITION MACHINES, HAMMER, wheel OR track mounted, remote controlled Op. 15.11.2001 Dec. 02.02.2002 - TC 0110323 POSTFORMING MACHINES, computer controlled, having a power driven heated pressure bar Op. 27.11.2001 Dec. 01.03.2002 - TC 0110693 STENCIL AND SCREEN PRINTING MACHINES, SURFACE MOUNTED PRINTED CIRCUIT BOARD Op. 13.03.2002 Dec. 07.06.2002 - TC 0202197 APPLICATING MACHINES, DRINKING STRAW, BEVERAGE CARTON Op. 19.03.2002 Dec. 07.06.2002 - TC 0202284 GRIT REMOVERS Op. 18.07.2002 Dec. 11.10.2002 - TC 0206336

8479.89.90

8479.89.90

8479.89.90 8479.89.90 8479.89.90 8479.89.90

WHEEL AND TYRE MOUNTING LINES, computer controlled Op. 12.08.2002 Dec. 25.10.2002 - TC 0207215 REPLICATION MACHINES, DIGITAL VERSATILE DISC (DVD), incorporating ANY of the following: (a) injection moulder; (b) sputterer; (c) coater; (d) bonder; (e) checker Op. 16.08.2002 Dec. 08.11.2002 - TC 0207452 BALING MACHINES, SOLID WASTE COMPACTING, TWIN RAM Op. 09.09.2002 Dec. 06.12.2002 - TC 0208295

8479.89.90 8479.89.90 8479.89.90

RECORDERS, LASER BEAM, DIGITAL VERSATILE DISC (DVD) Op. 08.11.2002 Dec. 31.01.2003 - TC 0210671 SLITTING/REWINDING MACHINES, comprising ALL of the following: (a) rewinder; (b) unwinding station complete with soundproof cover and lifter; (c) core loader; capable of slitting rolls to a maximum width of 1 600 mm Op. 09.12.2002 Dec. 07.03.2003 - TC 0211677 CLEANERS, SWIMMING POOL, self contained, electric, scrubber, sweeper, vacuum, self diagnostic Op. 11.12.2002 Dec. 07.03.2003 - TC 0211730 SCREENS, DISC, METAL AND PAPER SEPARATING Op. 23.12.2002 Dec. 14.03.2003 ASSEMBLERS, POCKET SPRING, MATTRESS Op. 14.08.2003 Dec. 31.10.2003 NUTRUNNERS, having a DC electric motor Op. 15.08.2003 Dec. 24.10.2003 - TC 0212075 - TC 0310084 - TC 0310086

8479.89.90

8479.89.90 8479.89.90 8479.89.90 8479.89.90

VEHICLES, EXPLOSIVE ORDNANCE DISPOSAL (EOD) OR IMPROVISED EXPLOSIVE DEVICE DISPOSAL (IEDD), battery operated, wireless remote OR fibre optic controlled, WHETHER or NOT having ANY of the following: (a) control console OR base station; (b) cameras; (c) firearms or disruptors; (d) water cannon; (e) x-ray apparatus;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(f) magnetic clamps; (g) tearing hooks; (h) gripper jaws; (i) glass breakers; (j) cryogenic freezing Op. 20.08.2003 8479.89.90

Dec. 07.11.2003

- TC 0310309

VACUUM LOADERS, comprising ALL of the following: (a) positive displacement bi-lobe pump; (b) hydraulic drive loading boom; (c) blower exhaust silencer; (d) single mode filtration Op. 11.11.2003 Dec. 11.02.2004

- TC 0314445

8479.89.90

PROCESSING MACHINES, WIRE AND CABLE, MEASURE, CUT AND STRIP, having at least one of the following: (a) crimper; (b) sealer and/or sleeve inserter; (c) solder; (d) flux; (e) twister; (f) marker Op. 22.12.2003 Dec. 31.03.2004 - TC 0315798 WINDER, TANDEM, EXTRUDED POLYETHYLENE MULTI-LAYER BLOWN FILM Op. 16.01.2004 Dec. 02.04.2004 - TC 0400755 RECOVERY SYSTEMS, CARBON DIOXIDE, comprising ALL of the following: (a) scrubber and absorber; (b) filter and cleaner; (c) dryer and purifier; (d) heat exchanger and liquefier; (e) compressor Op. 30.01.2004 Dec. 23.04.2004 - TC 0401305 REWINDERS, ALUMINIUM FOIL OR PLASTIC FILM, having ALL of the following: (a) mother-roll unwinder; (b) core feeder; (c) hot melt glue applicator; (d) rewinder; (e) length measurer; (f) foil AND/OR film cutter; (g) finished coil discharger Op. 27.04.2004 Dec. 19.07.2004 - TC 0404140 SPREADERS, ORGANIC MATERIALS, truck OR trailer mountable, pneumatic delivery by hose Op. 15.06.2004 Dec. 27.08.2004 - TC 0405762 LOADERS, four-wheel drive, having ALL of the following characteristics: (a) engine power exceeding 250 kW; (b) width over standard tyres exceeding 3 350 mm; (c) bucket hinge pin height at maximum lift exceeding 4 450 mm, but NOT including ANY of the following: (a) loaders when imported with buckets; (b) buckets, dippers, sticks, grabs, shovels, blades or similar attachments when imported as initial spares or replacement parts; (c) pins, collets or brake drums, when imported as initial spares or replacement parts; (d) picks, adaptors, points or teeth and similar wear parts

8479.89.90 8479.89.90

8479.89.90

8479.89.90

8479.89.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


when imported as initial spares or replacement parts Op. 28.06.2004 Dec. 07.07.2004 - TC 0406689 8479.89.90 LOADERS, skid steer, having a rated operating capacity of 350 kg or greater, but NOT including loaders imported with buckets, backhoe loader sections or other attachments Op. 28.06.2004 Dec. 07.07.2004 - TC 0406694 SEPARATORS, GAS AND/OR SOLID AND/OR LIQUID, OIL AND GAS WELL, comprising ALL of the following: (a) emergency shut down valve; (b) 3 phase vertical separator; (c) geologic sampler Op. 19.07.2004 Dec. 01.10.2004 - TC 0407289 CLEANERS, HEAT EXCHANGER AND/OR CONDENSER TUBES, on-line, having ALL of the following: (a) NOT less than one strainer screen; (b) ball re-circulation pump; (c) ball collector Op. 17.08.2004 Dec. 29.10.2004 - TC 0408440 ARTICULATED LOADERS, bare, 4 wheel drive, comprising ALL of the following: (a) weight NOT less than 1 400 kg and NOT greater than 3 400 kg; (b) engine power NOT less than 14.7 kW and NOT greater than 43 kW; (c) hydraulic or hydrostatic drive Op. 20.08.2004 Dec. 05.11.2004 - TC 0408576 SLURRY AND/OR LAGOON MIXERS, having a shaft length NOT less than 5 metres Op. 23.08.2004 Dec. 29.10.2004 - TC 0408608 VENDORS, CONFECTIONERY Op. 30.08.2004 Dec. 15.11.2004 - TC 0408869

8479.89.90

8479.89.90

8479.89.90

8479.89.90

8479.89.90 8479.89.90

ARTICULATED LOADERS, 4 wheel drive, comprising ALL of the following: (a) operating weight greater than 4 000 kg; (b) engine flywheel power greater than 36 kW; (c) maximum dump clearance height NOT less than 2.3 m at 45 degree dump angle; but NOT including: (a) underground mine loaders; (b) telescopic boom loaders Op. 08.11.2004 Dec. 04.02.2005 - TC 0411759 CABLE TENSIONERS, marine Op. 29.11.2004 Dec. 04.02.2005 - TC 0413050

8479.89.90 8479.90 8479.90.00

SIEVES, certified to conform to ASTM E11 or BS 410 Op. 05.06.1984 Dec. 05.06.1984 - TC 8439129 PARTS, STABILISER ROLL, STEEL STRIP METAL COATING LINE, being EITHER of the following: (a) stub shafts; (b) journals Op. 12.12.2012 Dec. 13.03.2013 - TC 1247569 PARTS, SUBSEA TEST TREE, OIL AND/OR GAS WELL, being latch mandrels Op. 28.12.2012 Dec. 18.03.2013 - TC 1349360

8479.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.90.00 PARTS, BLAST FURNACE TAPHOLE DRILL, being ANY of the following: (a) rings; (b) tubes; (c) sleeves AND/OR clamping sleeves; (d) control housings; (e) covers AND/OR housing covers; (f) cylinders; (g) discs; (h) pistons; (i) guides; (j) wheels; (k) retainers; (l) protectors; (m) shafts; (n) transition pieces Op. 16.10.2012 Dec. 02.01.2013 - TC 1239392 PARTS, CABLE HANDLING MODULE, CONVEYOR BELT MANUFACTURING LINE, being ANY of the following: (a) tension heads; (b) tensioning station frames; (c) clamping device frames Op. 04.07.2012 Dec. 26.09.2012 - TC 1223387 PARTS, WIND-UP STATION, CONVEYOR BELT MANUFACTURING LINE, being lateral supports Op. 31.07.2012 Dec. 15.10.2012 - TC 1227483 PARTS, METAL COATING LINE, PASSIVATION COATER, being hydraulic coater head locks Op. 06.08.2012 Dec. 22.10.2012 - TC 1228690 PARTS, GASHOLDER PISTON, being ALL of the following: (a) seal support timbers; (b) bulkhead extension plates; (c) fabric seals; (d) angle cleats; (e) packers; (f) clamps; (g) fasteners; (h) tangential guides Op. 25.06.2012 Dec. 10.09.2012 - TC 1221955 PARTS, METAL COATING LINE, being rolls Op. 28.02.2012 Dec. 21.05.2012 - TC 1206682

8479.90.00

8479.90.00

8479.90.00 8479.90.00

8479.90.00 8479.90.00

PARTS, WORKOVER SYSTEM, SUBSEA OIL AND GAS WELL, being ported hydraulic and electrical conduit joints Op. 30.01.2012 Dec. 16.04.2012 - TC 1203267 PARTS, SNOW GROOMER TILLER, being ANY of the following: (a) tooth end replacements; (b) rotor silent blocks; (c) pivot shafts; (d) yoke ends; (e) borders; (f) end plates; (g) snow combs; (h) rotors; (i) stiffener assemblies; (j) wings; (k) snow chambers; (l) bumpers;

8479.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(m) transversal bars; (n) fibreglass bars Op. 13.01.2012 8479.90.00 8479.90.00 Dec. 12.04.2012 - TC 1201500

PARTS, WOOD PARTICLE BOARD MAKING PRESS, being press frames Op. 06.12.2011 Dec. 13.02.2012 - TC 1140600 PARTS, CLAY OR MUD GUN, BLAST FURNACE TAPHOLE, being swivel-joints Op. 26.08.2011 Dec. 07.11.2011 - TC 1129188 PARTS, METAL COATING LINE, being sink rolls OR sink roll bodies, stainless steel Op. 28.07.2011 Dec. 28.10.2011 - TC 1125316 PARTS, STEEL STRIP METAL COATING LINE, being stainless steel stabiliser rolls Op. 20.06.2011 Dec. 05.09.2011 - TC 1119684 PARTS, STABILISER ROLL, STEEL STRIP METAL COATING LINE, being EITHER of the following: (a) journal sleeves; (b) plug OR button washer Op. 20.06.2011 Dec. 05.09.2011 - TC 1119734 HORSE WALKER TRACK, RAMP AND TANK SYSTEM, including ALL of the following: (a) track sections; (b) ramp sections; (c) sump; (d) sump sections; (e) anchors; (f) struts; (g) tanks; (h) tank covers, including retainers and clips; (i) gangplanks Op. 27.10.2010 Dec. 17.01.2011 - TC 1048084 PARTS, UNDERGROUND MINING ROOF SUPPORT MACHINE, being leg cylinders Op. 29.09.2010 Dec. 20.12.2010 - TC 1044228 PARTS, GLUTEN DISINTEGRATOR, being rotors with arms Op. 24.09.2009 Dec. 04.12.2009 - TC 0936044 PARTS, STEEL COATING MILL, being shock absorbers AND/OR strip separators Op. 16.06.2009 Dec. 04.09.2009 - TC 0920262 PARTS, WORKOVER SYSTEM, SUBSEA OIL AND GAS WELL, being ANY of the following: (a) annular slick joints; (b) circulation heads; (c) hang off bushings; (d) lower riser package test and/or handling skids; (e) overshot tool adapters; (f) riser slick joints; (g) riser stress joints; (h) riser tension joints; (i) riser system gaskets; (j) release blocks; (k) shearable joints; (l) landing strings;

8479.90.00

8479.90.00

8479.90.00

8479.90.00

8479.90.00

8479.90.00 8479.90.00

8479.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(m) landing string adapter joints; (n) spacer joints; (o) swivels; (p) tubing hanger orientation joints; (q) umbilical bend restrictors; (r) union nut riser joints Op. 08.05.2009 Dec. 31.07.2009 8479.90.00

- TC 0915620

CONTROLLERS, SCREEDING MACHINE including ALL of the following: (a) starter motors; (b) power elements; (c) touch screen panels; (d) radio remote control panels; (e) wireless master panels; (f) modems; (g) control cards Op. 27.01.2009 Dec. 17.04.2009 - TC 0902636 DRUM SHELLS, DEBARKER Op. 05.01.2009 Dec. 27.03.2009 - TC 0945730

8479.90.00 8479.90.00

PARTS, AUTOMOTIVE REFINISHING PAINT MIXERS, being storage housings Op. 01.01.2007 Dec. 15.11.2006 - TC 0614307 ACTUATORS, PROGRAMMED GREASE LUBRICATOR, being EITHER of the following: (a) electro-mechanically operated; (b) electro-chemical reaction operated Op. 01.01.2007 Dec. 15.11.2006 - TC 0614319 PARTS, WET COMMINUTION MILLS, being ANY of the following: (a) rotors; (b) stators; (c) frames; (d) shafts; (e) sleeves; (f) sealing heads; (g) flanges; (h) plates; (i) plugs; (j) discharge screens; (k) cooling jackets; (l) inner jackets; (m) outer jackets; (n) flange rings; (o) guide rods Op. 01.01.2007 Dec. 15.11.2006 - TC 0614320 PARTS, ANIMAL OIL EXTRACTION HYDRAULIC SCREW PRESS, being ANY of the following: (a) cages; (b) cage bars; (c) cage keys; (d) intermediate rings; (e) scrapers; (f) side bars; (g) spacers; (h) screw shafts; (i) feed quills; (j) flights; (k) end rings; (l) distance sleeves;

8479.90.00

8479.90.00

8479.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(m) chokes; (n) guide flanges; (o) scraper bars; (p) shims Op. 01.01.2007 8479.90.00 8479.90.00

Dec. 15.11.2006

- TC 0614321 - TC 0614322

PULSATION DAMPENER CARTRIDGES Op. 01.01.2007 Dec. 15.11.2006

PARTS OF COMPACT DISC REPLICATION MACHINES, being replication machines forming an integral part of compact disc manufacturing systems Op. 01.01.2007 Dec. 15.11.2006 - TC 0614323 AUTOCLAVABLE MICROPIPETTE TIPS, packed in autoclavable racks Op. 01.01.2007 Dec. 15.11.2006 - TC 0614324 PARTS, PLASMA ARC CUTTING TORCH, being ANY of the following: (a) retaining caps; (b) nozzles; (c) swirl rings; (d) electrodes; (e) shields; (f) shield caps; (g) deflectors; (h) shield adaptors Op. 01.01.2007 Dec. 15.11.2006 - TC 0614325 LEADS, PLASMA ARC TORCH ASSEMBLY Op. 01.01.2007 Dec. 15.11.2006 TIPS for continuously adjustable pipettes Op. 01.01.2007 Dec. 15.11.2006 SIEVES, certified to conform to ISO 565 Op. 01.01.2007 Dec. 15.11.2006 - TC 0614326 - TC 0614327 - TC 0614328

8479.90.00

8479.90.00

8479.90.00 8479.90.00 8479.90.00 8479.90.00

PARTS FOR PELLETING PRESSES, being ANY of the following: (a) ring dies; (b) roll shells Op. 01.01.2007 Dec. 15.11.2006 - TC 0614329 PARTS, AUTOMOTIVE REFINISHING PAINT MIXING MACHINE, with multiple impeller shafts powered by a drive motor, being ANY of the following: (a) mixing lids with agitators; (b) mixing agitators; (c) mixing shelves; (d) slotted shelves Op. 01.01.2007 Dec. 15.11.2006 - TC 0614331 PARTS, (a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) HYDRAULIC TORQUE WRENCH, being ANY of the following: housings; ratchets; ratchet links; drive plates; side plates; uniswivels; reaction arms; square drive housings; square drives; pistons; piston rods;

8479.90.00

8479.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(l) end cap cylinders; (m) hex drives; (n) drive pawls Op. 01.01.2007 8479.90.00

Dec. 15.11.2006

- TC 0614332

PARTS, HYDRO-PNEUMATIC ACCUMULATOR, being ANY of the following: (a) bladder; (b) gas valve; (c) gas valve core; (d) locknut; (e) protective cap; (f) O ring stem; (g) anti-extrusion ring; (h) O ring fluid port; (i) bonded seal; (j) back-up ring; (k) fluid port body; (l) spring; (m) poppet valve; (n) collets; (o) piston; (p) flanged washer; (q) locking ring; (r) bleed adaptor; (s) bleed valve Op. 01.01.2007 Dec. 15.11.2006 - TC 0614334 PIPET TIPS Op. 01.01.2007 Dec. 15.11.2006 - TC 0614335 - TC 0614336

8479.90.00 8479.90.00 8479.90.00

PARTS, ROAD PAVERS, being screeds Op. 01.01.2007 Dec. 15.11.2006

PARTS, DIAPER MAKING MACHINE, being ANY of the following: (a) pulp defribulators (hammermills); (b) forming chambers; (c) forming chamber roll shafts; (d) forming chamber drum seals; (e) forming drums; (f) web guides; (g) transfer rolls; (h) forming insert screens; (i) geometric folders; (j) debulkers; (k) lineshafts; (l) size change debulker rolls; (m) festoons; (n) inner cover unwind servo motors; (o) inner cover unwinds Op. 01.01.2007 Dec. 15.11.2006 - TC 0614337 ROLL BODIES OR SINK ROLLS, GALVANISING LINE Op. 01.01.2007 Dec. 15.11.2006 - TC 0614338

8479.90.00

8479.90.00

PARTS, DIAPER MAKING MACHINE, being ANY of the following: (a) powder meters and conveyors; (b) pulp unwinders; (c) pulp feed trays; (d) tissue unwinders; (e) surge unwinders; (f) surge applicators; (g) lotion applicators; (h) forming-tissue unwinders;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(i) liner unwinders; (j) tissue water cutters; (k) fluff cutters; (l) material tackers; (m) loop material applicators; (n) loop material unwinders; (o) outer cover unwinders; (p) leg elastic applicators and product conveyors; (q) stretch ear applicators; (r) containment flap applicators; (s) waist elastic applicators; (t) stretch ear unwinders; (u) bonded laminate unwinders; (v) diaper profile water cutters; (w) flap formers and gluers; (x) elastic unwinders; (y) flap unwinders; (z) ear folders; (aa) cut-offs and bladefolders; (ab) stretch ear formers; (ac) containment flap inline applicators; (ad) whole diaper imagers; (ae) lineshafts; (af) waist elastic unwinders; (ag) main operator panels; (ah) stack handlers Op. 01.01.2007 Dec. 15.11.2006 - TC 0614339 8479.90.00 8479.90.00 BARRELS, CLAY OR MUD GUN, BLAST FURNACE TAPHOLE Op. 01.01.2007 Dec. 15.11.2006 - TC 0614340

PARTS, LONGWALL MINING ROOF SUPPORT CONTROL SYSTEMS, being ANY of the following: (a) valves and valve packs; (b) intelligent power supply; (c) loop converter incorporating programmable logic controller; (d) transducers; (e) shield interface Op. 01.01.2007 Dec. 15.11.2006 - TC 0614341 MANDRELS, ROLLER, PIVOTING ARM, COIL BOX, HOT STRIP STEEL ROLLING MILL Op. 01.01.2007 Dec. 04.12.2006 - TC 0614746 PARTS, HYDRAULIC SCREW PRESS, EDIBLE OIL EXTRACTION, being ANY of the following: (a) cage frames; (b) cage end rings; (c) choke rings; (d) centre sleeves; (e) distance pieces; (f) gib bars; (g) key bars; (h) knife bars; (i) lining bars; (j) mainshafts; (k) pressure pieces; (l) shims; (m) shoe frame bars; (n) wedging strips; (o) worm assemblies Op. 01.01.2007 Dec. 30.11.2006 - TC 0614762

8479.90.00

8479.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8479.90.00 PARTS, CONTINUOUS STRIP PAINT LINE, being ANY of the following: (a) vapor exhaust; (b) stitch detector; (c) exit sleeves; (d) cable and/or chain trays; (e) load cell amplifiers; (f) detector emitters and receivers, stitch detector Op. 01.01.2007 Dec. 29.11.2006 - TC 0614771 PARTS, TABLET PRESS, PHARMACEUTICAL, being EITHER of the following: (a) dies; (b) punches Op. 01.01.2007 Dec. 29.11.2006 - TC 0614772 PARTS, ACCESS CONTROL, CONTINUOUS PAINT LINE, being ANY of the following: (a) stanchions; (b) mesh panels Op. 01.01.2007 Dec. 07.12.2006 - TC 0614788 PARTS, CONTINUOUS STEEL STRIP PAINT LINE, being ANY of the following: (a) squeegee rolls; (b) solution removers; (c) strip support tables Op. 01.01.2007 Dec. 07.12.2006 - TC 0614789 PARTS, UNDERGROUND MINING ROOF SUPPORTS, being ANY of the following: (a) advancing cylinders; (b) relay bars Op. 01.01.2007 Dec. 16.01.2007 - TC 0700601 PARTS, PLASMA CUTTING MACHINES, being torches Op. 19.12.2007 Dec. 07.03.2008 - TC 0702852

8479.90.00

8479.90.00

8479.90.00

8479.90.00

8479.90.00

8479.90.00

PARTS, PARTICLE BOARD PRESS, being ANY of the following: (a) press cylinder housings; (b) press pistons; (c) flexible piston fasteners; (d) press tables; (e) centre heating platens; (f) distance bars and holders; (g) cross beam heating platens; (h) guide bars; (i) guide blocks; (i) simultaneous closer bearings Op. 01.01.2007 Dec. 04.04.2007 - TC 0704543 CUTTER HEADS, TRIM CUTTER, having BOTH of the following: (a) multiple knives; (b) tapered roller bearings Op. 22.05.2007 Dec. 03.08.2007 - TC 0707615 PARTS, SANITARY PAD MAKING MACHINE, being ANY of the following: (a) rotary die cutting heads; (b) cut and seal rollers; (c) process wheels and moulds; (d) embossing rollers; (e) peripheral sealing rollers; (f) powered non-woven unwinders;

8479.90.00

8479.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(g) edge controllers; (h) ultrasonic welders and rollers; (i) powered release tape unwinders; (j) servo driven pulling rollers and control gears; (k) hot melt applicators including hoses and control cards; (l) cutters and placers; (m) stacker belts; (n) powered material pulling rollers Op. 02.07.2007 Dec. 21.09.2007 - TC 0708197 8479.90.00 PARTS, CONTACT LENS MANUFACTURING LINE, being ANY of the following: (a) injection moulders; (b) robotic arms; (c) conveyor ovens; (d) de-moulders; (e) blister sealers; (f) autoclaves Op. 01.01.2007 Dec. 27.08.2007 - TC 0711123 PARTS, ION EXCHANGE, COUNTER CURRENT SYSTEM, being ANY of the following: (a) turntables; (b) vessels; (c) ion exchange resins; (d) control panels; (e) drives Op. 09.08.2007 Dec. 19.10.2007 - TC 0712696 PARTS, METAL COATING OR GALVANISING LINE, being EITHER of the following: (a) tip snouts; (b) end cheeks Op. 05.11.2007 Dec. 29.01.2008 - TC 0718892 PLASMA ARC TORCH ASSEMBLIES, comprising torch with control switches, and coaxial conduit Op. 26.02.2008 Dec. 09.05.2008 - TC 0803239 PARTS, PRESSURE TRANSFER PUMPS, DESALINATION PLANT, being hydraulic proportioning vessels Op. 20.11.2007 Dec. 22.04.2008 - TC 0803873 PARTS, MEDIUM DENSITY FIBRE BOARD PRODUCTION PLANT, being EITHER of the following: (a) press drums; (b) rollers Op. 31.07.2008 Dec. 24.10.2008 - TC 0824134 DRUM SHELLS, DEBARKER Op. 05.01.2009 MOULDS, bullet Op. 27.11.1984 Dec. 27.03.2009 Dec. 27.11.1984 - TC 0945730 - TC 8434728

8479.90.00

8479.90.00

8479.90.00

8479.90.00

8479.90.00

8479.90.00 8480.49

8480.49.00

MOULDS, CONVEX, BILLET CASTER, including mould tubes and foot rolls Op. 05.09.2008 Dec. 28.11.2008 - TC 0829792 MOULD TUBES, STEEL PRODUCTION, copper alloy, curved and tapered Op. 26.02.1999 Dec. 14.05.1999 - TC 9901448

8480.49.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8480.50.00 8480.50.00 8480.50.00 8480.50.00 8480.60 BAFFLES, GLASS BOTTLE MOULD Op. 03.06.2009 Dec. 28.08.2009 - TC 0918827

MOULDS, NECK RING AND/OR BOTTOM PLATE, GLASS BOTTLE Op. 12.06.2008 Dec. 15.08.2008 - TC 0812464 MOULDS, GLASS BOTTLE, metal Op. 12.06.2008 Dec. 01.09.2008 - TC 0812467

ADAPTORS AND/OR GUIDE PLATES, METAL, GLASS BOTTLE MOULDS Op. 30.06.2008 Dec. 19.09.2008 - TC 0815148 MOULDS, brick paver, one piece non casted steel, with or without tamper heads, grid size 0.75 m2 or greater Op. 13.07.1990 Dec. 27.03.1991 - TC 9006203 MOULDS, CONCRETE BLOCK AND/OR PAVER AND/OR BRICK MAKING Op. 23.11.2011 Dec. 13.02.2012 - TC 1138953 MOULDS, FORMWORK AND FALSEWORK STEEL, being EITHER of the following: (a) section moulds; (b) panel moulds Op. 18.11.2009 Dec. 05.02.2010 - TC 0943633 MOULDERS, DRYCAST CONCRETE, being ANY of the following: (a) steel pit moulds; (b) steel manhole moulds; (c) steel culvert moulds Op. 10.11.2006 Dec. 09.02.2007 - TC 0701951 MOULDS, CONCRETE SEGMENT, steel Op. 14.01.2008 Dec. 28.03.2008 - TC 0800796

8480.60.00 8480.60.00

8480.60.00

8480.60.00 8480.60.00

FORMWORK, STEEL, PRECAST CONCRETE COUNTERFORT, panels and sections complying with BOTH of the following: (a) welding Australian Standard 1554.1:2004 (AS1554.1:2004); (b) Standards Association of Australia (SAA) steel structure code Australian Standard 1250:1981 (AS1250:1981) Op. 08.09.2008 Dec. 28.11.2008 - TC 0830062 MOULDS, BRICK, one piece non cast steel, with or without tamper heads, grid size 0.75 sq m OR greater Op. 02.05.1997 Dec. 11.07.1997 - TC 9703949 MOULDS, SANITARY WARE Op. 30.06.2004 Dec. 10.09.2004 - TC 0406477

8480.60.00

8480.60.00 8480.71.00

MOULDS, CHAIR, nitrogen gas injection, hydraulically operated overflows Op. 17.08.2012 Dec. 12.11.2012 - TC 1230403 MOULDS, INJECTION, EVAPORATIVE AIR COOLER PLASTIC TANK Op. 14.08.2012 Dec. 29.10.2012 - TC 1230092 MOULDS, INJECTION, EVAPORATIVE AIR COOLER PLASTIC GRILLE Op. 23.07.2012 Dec. 10.10.2012 - TC 1226442 MOULDS, SINGLE AND TWIN SCREW INJECTION, robotic removal, having ALL of the following: (a) width NOT less than 2 200 mm; (b) height NOT less than 2 200 mm;

8480.71.00

8480.71.00 8480.71.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) length NOT less than 1 675 mm; (d) weight NOT less than 65 t; (e) hydraulic angular lifters; (f) balanced hot runner system, cycle 120 seconds Op. 30.03.2012 Dec. 25.06.2012 - TC 1210472 8480.71.00 8480.71.00 MOULDS, COMPACT SLIDE ACTUATION Op. 30.06.2011 Dec. 19.09.2011 - TC 1121643

MOULDS, FLOTATION POD, regular hexagonal, having ALL of the following: (a) external dimensions having ALL of the following: (i) length NOT less than 2 500 mm; (ii) width NOT less than 1 500 mm; (iii) height NOT less than 1 250 mm, (b) weight NOT less than 20 t; (c) sequential hot runner gating Op. 26.05.2010 Dec. 17.08.2010 - TC 1023418 INJECTION MOULDS, AUTOMOTIVE BUMPER, having ALL of the following: (a) width NOT less than 2 500 mm; (b) height NOT less than 1 550 mm; (c) length NOT less than 1 600 mm; (d) weight NOT less than 29.5 t; (e) single point lift; (f) hydraulic angular compact slide actuation Op. 24.09.2012 Dec. 17.12.2012 - TC 1236557 INJECTION MOULDS, AUTOMOTIVE BUMPER COMPONENTS, having BOTH of the following: (a) moulded in sensor housings; (b) hydraulic angular compact slide actuation Op. 24.09.2012 Dec. 17.12.2012 - TC 1236558 MOULDS, COMPACT DISC REPLICATION Op. 01.01.2007 Dec. 15.11.2006 - TC 0614312

8480.71.00

8480.71.00

8480.71.00 8480.71.00

MOULDS, boots and shoes, comprising ALL of the following: (a) aluminium side moulds, divided, with steel bite lips; (b) aluminium sole moulds including engraving; (c) aluminium dummy lasts for side contour parting Op. 01.01.2007 Dec. 15.11.2006 - TC 0614313 MOULDS, DIGITAL VERSATILE DISC (DVD) Op. 01.01.2007 Dec. 15.11.2006 - TC 0614314

8480.71.00 8480.71.00

MOULDS, STEEL, single cavity AND/OR dual cavity, motor vehicle battery casing, comprising ALL of the following: (a) mould frames; (b) cores; (c) slide elements Op. 01.01.2007 Dec. 29.11.2006 - TC 0614774 COLD HALF, PREFORM, POLYETHYLENE TEREPHTHALATE INJECTION MOULDING Op. 18.07.2007 Dec. 21.09.2007 - TC 0711640 MOULDS, BATTERY LIDS AND/OR HANDLES, MOTOR VEHICLE, steel, single cavity AND/OR multiple cavity, comprising ALL of the following: (a) mould frames; (b) cores; (c) slide elements Op. 21.09.2007 Dec. 07.12.2007 - TC 0715854

8480.71.00

8480.71.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8480.71.00 MOULDS, FOOTWEAR, aluminium, comprising ANY of the following: (a) side moulds; (b) sole moulds; (c) lasts Op. 11.04.2008 Dec. 04.07.2008 - TC 0803231 MOULDS, BUCKET AND HANDLE, plastic injection Op. 17.10.2008 Dec. 14.01.2009 MOULDS, multi-cavity, teeth Op. 27.11.1984 Dec. 27.11.1984 - TC 0835989 - TC 8434730

8480.71.00 8480.79 8480.79.00 8480.79.00 8480.79.00 8480.79.00

COLLAPSIBLE MANDRELS, with OR without pressure socket Op. 08.03.2012 Dec. 28.05.2012 - TC 1207967 MOULD BLOCKS, CORRUGATED PLASTIC PIPE Op. 26.03.2007 Dec. 15.06.2007 MOULDS, PNEUMATIC TYRES Op. 25.07.1997 Dec. 03.10.1997 - TC 0704422 - TC 9706536

MOULDS, MOTOR VEHICLE DASHBOARDS, being polyvinyl chloride skin forming moulds utilising slush moulding techniques Op. 10.09.1998 Dec. 12.02.1999 - TC 9808057 REGULATORS, helium balloon inflating Op. 12.06.1984 Dec. 12.06.1984 - TC 8438626

8481.10 8481.10

VALVES, PRESSURE REDUCING, hydraulic sliding spool, maximum inlet pressure of 20 000 kPa or greater Op. 12.06.1984 Dec. 01.01.1988 - TC 8439621 VALVES, PRESSURE REDUCING, oil hydraulic system, maximum working pressure NOT less than 35 MPa Op. 20.02.1987 Dec. 22.04.1987 - TC 8732574 REGULATORS, pressure, LP and natural gas, minimum capacity 14 cu m/h or greater with inlet pressure at 15 kPa or greater but NOT including domestic meter regulators Op. 20.02.1988 Dec. 28.12.1990 - TC 8800867 REGULATORS, pressure, gas and/or liquid, normal working inlet AND outlet pressure exceeding 35 MPa Op. 05.12.1990 Dec. 05.12.1990 - TC 9009244 REGULATORS, PRESSURE, NATURAL GAS OR LPG, having BOTH of the following: (a) flow capacity NOT greater than 25 m3/h; (b) inlet pressure NOT greater than 515 kPa Op. 10.01.2012 Dec. 26.03.2012 - TC 1201191 VALVES, GLOBE, 2 stage pressure reducing, motor actuated, having a maximum flow rate greater than 100 000 kg/h Op. 06.04.2011 Dec. 27.06.2011 - TC 1111660 VALVES, PRESSURE REDUCING, PASSENGER TRAIN Op. 01.02.2010 Dec. 23.04.2010

8481.10

8481.10

8481.10

8481.10.00

8481.10.00

8481.10.00 8481.10.00

- TC 1005545

VALVES, PRESSURE REDUCING, hot and cold water, comprising ALL of the following: (a) maximum inlet pressure NOT greater than 2 000 kPa; (b) maximum temperature NOT greater than 65 degrees C;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) factory set outlet pressure NOT greater than 500 kPa; (d) outlet pressure NOT less than 100 kPa and NOT greater than 600 kPa Op. 21.10.2009 Dec. 04.01.2010 - TC 0939654 8481.10.00 8481.10.00 PRESSURE RELIEF VALVES, pilot operated, dual outlet Op. 04.09.2009 Dec. 20.11.2009 - TC 0932809 VALVES, ANTI-SKID, LOCOMOTIVE, pneumatic, programmable logic control Op. 03.04.2006 Dec. 23.06.2006 - TC 0606133 VALVES AND/OR REGULATORS, PACKAGE DEGASSING, polyethylene base Op. 14.09.2007 Dec. 16.11.2007 - TC 0714908 VALVES, adjustable pilot, having four ports including sensing, commanding, venting and pressure, being mini 3-way relay plunger and diaphragm operated valves with glass reinforced body to modulate pressure reducing valves and or pressure sustaining or flow control valves Op. 12.07.1993 Dec. 15.10.1993 - TC 9306882 PRESSURE REGULATORS, irrigation sprinkler head Op. 20.10.1994 Dec. 08.02.1995 - TC 9408367

8481.10.00 8481.10.00

8481.10.00 8481.10.00

8481.10.00

REGULATORS, PRESSURE, ANHYDROUS AMMONIA OR LIQUIFIED PETROLEUM GAS, single, first and second stage, having straight through or right angled inlet and outlet but NOT including domestic meter regulators Op. 14.11.1995 Dec. 08.03.1996 - TC 9512580 REGULATORS, GAS, having a flow capacity NOT less than 4 L/s at 69 kPa inlet pressure Op. 06.11.1997 Dec. 13.03.1998 - TC 9709810 REGULATORS, LIQUIFIED PETROLEUM GAS, changeover, with first and second stage regulators Op. 09.02.1998 Dec. 22.05.1998 - TC 9801194 REGULATORS, PRESSURE, having ALL of the following: (a) sensitivity level of 0.3 mbar OR greater; (b) pressure range 0 kPa to 1 750 kPa; (c) constant bleed Op. 26.03.1998 Dec. 05.06.1998 - TC 9802681 CONNECTORS, SPANNER JOINT, SUBSEA OIL AND/0R GAS WELL EQUIPMENT, incorporating valves, having a maximum working pressure NOT less than 510 bar Op. 18.05.2012 Dec. 06.08.2012 - TC 1216681 VALVES, PASSENGER TRAIN BRAKE SYSTEM, being ANY of the following: (a) two-way valves; (b) levelling valves; (c) magnet valves; (d) ballcocks Op. 15.03.2010 Dec. 04.06.2010 - TC 1012857 VALVES, CHECK, auxiliary reverse flow, to API Specification 6A Op. 01.07.1983 Dec. 01.07.1983 - TC 8430782 VALVES, CHECK, welding hose flashback prevention Op. 12.06.1984 Dec. 12.06.1984 - TC 8438665

8481.10.00

8481.10.00

8481.20.00

8481.20.00

8481.30 8481.30 8481.30

VALVES, CHECK, manifold mounted, sandwich or flange type, capable of pressures of 31.5 MPa or greater Op. 12.06.1984 Dec. 01.01.1988 - TC 8438703

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.30 VALVES, PILOT CHECK, oil, maximum working pressure 35 MPa, maximum flow rate 379 L/min Op. 12.06.1984 Dec. 12.06.1984 - TC 8439623 VALVES, CHECK, diesel engine fuel injector Op. 03.09.1985 Dec. 24.02.1986 - TC 8534616

8481.30 8481.30.00

KITS, URINAL DEODOURISER, consisting of ALL of the following: (a) non-return valve; (b) deodouriser and retainer; (c) sock filter; (d) maintenance and service guide Op. 03.09.2012 Dec. 19.11.2012 - TC 1233052 FLOAT COLLARS OR FLOAT SHOES, OIL AND/OR GAS AND/OR WATER WELLS Op. 23.02.2012 Dec. 14.05.2012 - TC 1206127 VALVES, NON-RETURN, ISOLATING, brass body Op. 07.07.2010 Dec. 29.09.2010 VALVES, CHECK, SPINDLE GREASE PUMP Op. 20.04.2010 Dec. 02.07.2010 - TC 1030735 - TC 1017964

8481.30.00 8481.30.00 8481.30.00 8481.30.00 8481.30.00 8481.30.00 8481.30.00

VALVES, CHECK(NONRETURN), PASSENGER TRAIN BRAKE SYSTEM Op. 08.02.2010 Dec. 07.05.2010 - TC 1007003 BALL VALVES, being freeze protection devices, motor driven Op. 30.11.2009 Dec. 26.02.2010 - TC 0945229 VALVES, CHECK, BACKFLOW PREVENTION Op. 14.10.2009 Dec. 30.12.2009 - TC 0938776

PARTS, TEMPERING VALVE, being plastic spring loaded cartridge nonreturn valves Op. 10.08.2009 Dec. 16.10.2009 - TC 0929074 VALVES, NON-RETURN AND ISOLATING, HOT WATER SYSTEM, having ALL of the following: (a) complying with Australian Standards 1357.1 (AS1357.1) and 1357.2 (AS1357.2); (b) flow rate NOT greater than 0.09 litres per second; (c) operating temperature NOT greater than 80 degrees Celsius Op. 03.07.2009 Dec. 02.10.2009 - TC 0936874 VALVES, SWING CHECK, having ALL of the following: (a) design temperature NOT less than 340 degrees C; (b) design pressure NOT less than 75 bar; (c) inlet diameter NOT less than 850 mm; (d) body material alloy steel complying with American Society for Testing and Material Standards (ASTM) A 217-WC6 Op. 15.06.2006 Dec. 01.09.2006 - TC 0610393 GROUT AND LIFTING SYSTEM, high density polyethylene, assembled or unassembled, comprising ALL of the following: (a) lifting sockets; (b) non-return valves; (c) sealing plugs; (d) sealing rings with OR without sealing collars Op. 16.01.2008 Dec. 11.04.2008 - TC 0800935

8481.30.00

8481.30.00

8481.30.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.30.00 VALVES, CHECK, NON-SLAM, air flow, having BOTH of the following: (a) tested in accordance with American Petroleum Institute Standard 598 (API 598); (b) bore size NOT less than 500 mm Op. 09.04.2008 Dec. 04.07.2008 - TC 0802897 VALVES, CHECK, SUBSEA Op. 02.04.2008 Dec. 20.06.2008 - TC 0805147

8481.30.00 8481.30.00 8481.30.00 8481.30.00 8481.30.00 8481.30.00

VALVES, CHECK, Y, OIL AND GAS WELL, spring controlled flapper Op. 21.05.2008 Dec. 18.08.2008 - TC 0809065 VALVES, NON-RETURN, ISOLATING, cast gunmetal body Op. 27.08.2008 Dec. 21.11.2008 VALVES, STEAM, SCREW DOWN CHECK Op. 03.09.2008 Dec. 21.11.2008 VALVES, CHECK, automotive air brake system Op. 10.05.1993 Dec. 06.08.1993 - TC 0828206 - TC 0829432 - TC 9305583

VALVES, CHECK, MANUALLY OPERATED, stainless steel, having ALL of the the following: (a) capable of operating within the temperature range of -196 degrees C to 816 degrees C; (b) manufactured in accordance with one of the following standards: (i) ANSI B2.1; (ii) ANSI B16.10; (iii) ANSI B16.34; (iv) API 6D; (v) API 597; (vi) API 598; (vii) API 600 (c) having a pressure rating of one of the following classes: (i) ANSI 150; (ii) ANSI 300; (iii) ANSI 600; (iv) ANSI 900; (v) ANSI 1500; (vi) ANSI 2500; (vii) ANSI 4500 Op. 03.02.1993 Dec. 21.05.1993 - TC 9308172 VALVES, check, manifold mounted, sandwich, flange or threaded type capable of pressures of 31.5 MPa or greater Op. 24.02.1994 Dec. 06.06.1994 - TC 9402428 VALVES, CHECK, acrylic Op. 16.03.1993 Dec. 21.04.1995 - TC 9502474

8481.30.00

8481.30.00 8481.30.00

VALVES, CHECK, liquefied petroleum gas regulators, having ALL of the following: (a) air activated; (b) body and cover constructed of glass filled nylon; (c) pressure setting NOT greater than 3.7 kPa, but NOT including automotive cylinder valves or valves incorporating a solenoid shut-off Op. 26.12.1995 Dec. 29.03.1996 - TC 9600815 VALVES, CHECK, steel, forged, being EITHER ball, piston or swing, having a bore of 50 mm or less, complying with ALL of the following: (a) manufactured in accordance with one of the following

8481.30.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


standards: (i) BS 2995; (ii) BS 5352; (iii) API 602; (b) having a pressure rating of one of the following classes: (i) ANSI 150; (ii) ANSI 300; (iii) ANSI 600; (iv) ANSI 800; (v) ANSI 900; (vi) ANSI 1500; (vii) ANSI 2500; (viii) ANSI 4500; (c) end connections EITHER screwed, socket welded, flanged or buttwelded Op. 08.05.1997 Dec. 11.07.1997 - TC 9704105 8481.30.00 8481.30.00 VALVES, CHECK, titanium Op. 09.12.1997 Dec. 27.02.1998 - TC 9710811

COUPLINGS, SCREW, HYDRAULIC LINE PRESSURE TESTING, having BOTH of the following: (a) working pressure exceeding 25 MPa; (b) check valve and caps Op. 10.12.1997 Dec. 27.02.1998 - TC 9710910 VALVES, BACK CHECK, LIQUIFIED PETROLEUM GAS AND ANHYDROUS AMMONIA, having a tank connection size of 19 mm OR greater Op. 09.02.1998 Dec. 24.04.1998 - TC 9801193 VALVES, CHECK being EITHER ball, piston, swing OR nozzle, flange mounted OR buttweld, having ALL of the following: (a) pressure rating to ANY of the following: (i) ANSI 150; (ii) ANSI 300; (iii) ANSI 600; (iv) ANSI 900; (v) ANSI 1 500; (vi) ANSI 2 500; (b) pressure temperature rating to ANSI B16.34; (c) face to face (flange) OR end to end (buttweld) dimensions to ANSI B16.10; (d) in respect to flange mounted valve, having end dimension and gasket face finishes to ANSI B16.5; (e) hydrostatic and air test pressure to API 598; (f) wall thickness to EITHER API 600, API 6D, BS 1868 OR BS 1873; (g) bore size of 40 mm OR greater Op. 04.05.1998 Dec. 17.07.1998 - TC 9803722 VALVES, CHECK, chlorinated PVC, swing OR diverter Op. 22.05.1998 Dec. 31.07.1998 - TC 9804365

8481.30.00

8481.30.00

8481.30.00 8481.30.00

VALVES, BACK FLOW PREVENTION, having BOTH of the following: (a) diameter exceeding 300 mm; (b) elastomeric duckbill sleeve and no moving parts Op. 20.07.1998 Dec. 11.12.1998 - TC 9806359 VALVES, SPILL CONTROL, stainless steel, float actuated Op. 17.09.2001 Dec. 30.11.2001 - TC 0108272 VALVES, CHECK, NON SLAM, having BOTH of the following: (a) pressure temperature rating to ANSI B16.34; (b) bore size NOT less than 40 mm Op. 09.04.2003 Dec. 27.06.2003 - TC 0303914

8481.30.00 8481.30.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.40 VALVES, DIFFERENTIAL RELIEF, maximum pressure 34.50 MPa and maximum flow rate 379 L/min Op. 12.06.1984 Dec. 12.06.1984 - TC 8438694 VALVES, PRESSURE RELIEF, solenoid unloading, subplate or manifold mounted Op. 12.06.1984 Dec. 12.06.1984 - TC 8438717 VALVES, RELIEF, diesel engine cylinder head Op. 26.06.1984 Dec. 26.06.1984 - TC 8439471

8481.40

8481.40

8481.40

VALVES, RELIEF, ventable, oil hydraulic system, pilot operated, solenoid actuated Op. 26.06.1984 Dec. 26.06.1984 - TC 8439643 VALVES, RELIEF, diesel engine fuel pump Op. 03.09.1985 Dec. 24.02.1986 - TC 8534615

8481.40

8481.40

VALVES, PRESSURE CONTROL, airless spray paint system, incorporating a tungsten carbide valve seat and ball Op. 13.03.1986 Dec. 25.07.1986 - TC 8633034 VALVES, excess flow, gas discharge, operating pressure NOT less than 13 kPa and NOT greater than 20 600 kPa Op. 31.01.1989 Dec. 30.01.1991 - TC 8901542 VALVES, oilwell drilling mud control Op. 22.05.1991 Dec. 26.09.1991

8481.40

8481.40 8481.40

- TC 9105642

PRESSURE RELIEF DEVICE, comprising a piston with seal and a rupture pin capable of sensing ANY of the following: (a) upstream pressure; (b) differential pressure; (c) partial differential pressure, the pin buckles when a predetermined pressure is reached thus allowing the piston to move to a fully open position Op. 13.01.1992 Dec. 27.04.1992 - TC 9201109 GAS CONTROL COMBINATION UNIT incorporating a safety soleniod valve and inbuilt gas govenor with servo-system for control of gas/air ratio Op. 19.08.1991 Dec. 10.04.1992 - TC 9202529 GAS SAFETY VALVE, operated by a thermocouple or a thermopile, with a bore size greater than 1/2 inch but less than 1 inch B.S.P. Op. 01.06.1992 Dec. 01.06.1992 - TC 9206331 VALVES, relief, externally adjustable, stainless steel, for end connections NOT exceeding 8 mm outside diameter Op. 07.08.1992 Dec. 27.11.1992 - TC 9207315 VALVES, PRESSURE RELIEF, REFRIGERATION AND AIR CONDITIONING Op. 09.10.2012 Dec. 11.02.2013 - TC 1238194 VALVES, SAFETY SHUT-OFF, DIFFUSION SEAT, nickel alloy, having BOTH of the following: (a) direct coupled actuators; (b) noise attenuators Op. 18.05.2011 Dec. 08.08.2011 - TC 1115624

8481.40

8481.40

8481.40

8481.40.00

8481.40.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.40.00 VALVES, AIR AND VACUUM RELIEF, SOLAR HOT WATER SYSTEM, having ALL of the following: (a) operating temperature NOT greater than 230 degrees C; (b) working pressure NOT greater than 1 400 kPa; (c) chrome plated brass body; (d) fluoroelastomer seals Op. 09.02.2011 Dec. 27.07.2011 - TC 1122477 RELIEF VALVES, PRESSURE AND/OR VACUUM, ATMOSPHERIC VENT Op. 04.05.2011 Dec. 01.08.2011 - TC 1114141 VALVES, PRESSURE RELIEF, certified in accordance with Section VIII of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Op. 01.03.2011 Dec. 16.05.2011 - TC 1107613 VALVES, PRESSURE RELIEF, PUMP UNLOADING Op. 23.03.2010 Dec. 11.06.2010 - TC 1014274

8481.40.00 8481.40.00

8481.40.00 8481.80.90

FORMATION ISOLATION VALVES, DOWNHOLE, OIL AND/OR GAS WELL, whether OR not assembled, having a differential pressure of NOT less than 325 Bar Op. 11.06.2013 Dec. 09.09.2013 - TC 1319330 KITS, TOILET CISTERN, with OR without stopcock, including ALL of the following: (a) bracket; (b) flexible hose; (c) plug set, consisting of ALL of the following: (i) stepped flange; (ii) nut; (iii) plastic stop plug, (d) inlet valve bayonet Op. 28.05.2013 Dec. 26.08.2013 - TC 1317401 AERATING AND CHILLING WATER DISPENSING MACHINES, mains water connected, including ALL of the following: (a) stainless steel cabinet; (b) water chiller; (c) water dispensing taps; (d) water carbonator; (e) CO2 gas connector Op. 24.05.2013 Dec. 19.08.2013 - TC 1317025 SLEEVE VALVES, WATER TREATMENT PLANT, linear flow, multi-jet, submerged, including ALL of the following: (a) electric valve actuators; (b) inlet size NOT less than 900 mm; (c) body size NOT less than 600 mm; (d) flow capacity NOT less than 25 ML/day Op. 16.04.2013 Dec. 08.07.2013 - TC 1312982 ENGINE AUXILIARY MODULES, POWER GENERATION SET, including ALL of the following: (a) pre-heater; (b) valves; (c) gauges; (d) pumps; (e) control panel Op. 13.03.2013 Dec. 12.06.2013 - TC 1309201 PARTS, TEMPERATURE OR PRESSURE RELIEF VALVE, being stainless steel lifting levers

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.90.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Op. 24.04.2013 8481.90.90 Dec. 15.07.2013 - TC 1313772 PARTS, OIL AND/OR GAS WELL BLOWOUT PREVENTER, being ANY of the following: (a) blowout preventer bodies; (b) bonnets; (c) pistons; (d) cylinders; (e) flanges; (f) ram locking screws; (g) ram locking housing; (h) boosters; (i) bore rams; (j) open AND/OR close end caps; (k) ram locking pistons AND/OR sleeves AND/OR cylinders Op. 20.03.2013 Dec. 17.06.2013 - TC 1309982 TUBING HEAD ASSEMBLIES, SUBSEA OIL AND GAS WELL, including BOTH of the following: (a) wellhead connector; (b) wellhead hub Op. 08.11.2012 Dec. 30.01.2013 - TC 1242834 VALVES, REFRIGERATION AND AIR CONDITIONING, being ANY of the following: (a) packless line valves; (b) packed capped valves; (c) capped line valves; (d) service valves; (e) compressor valves Op. 26.10.2012 Dec. 14.01.2013 - TC 1240940 VALVES, BALL, surface, trunnion, actuated, flanged end, split body having a diameter NOT greater than 250 mm Op. 08.10.2012 Dec. 27.12.2012 - TC 1238148 VALVES, INLET AND/OR OUTLET, TOILET CISTERN Op. 09.10.2012 Dec. 27.12.2012 - TC 1238299

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90

VALVES, positive AND/OR negative pressure, being ANY of the following: (a) blow-through airlock; (b) discharge airlock; (c) tangential airlock Op. 15.10.2012 Dec. 07.01.2013 - TC 1239266 VALVES, THERMOSTATIC EXPANSION, AUTOMOTIVE ENGINE COOLING CONTROL Op. 16.10.2012 Dec. 02.01.2013 - TC 1239578 VALVES, butterfly, triple offset, stainless steel OR carbon steel, having BOTH of the following: (a) double flange mounting; (b) bore size NOT less than 75 mm Op. 19.10.2012 Dec. 07.01.2013 - TC 1240132 GATE VALVES, manually operated, having BOTH of the following: (a) working pressure NOT less than 20 MPa and NOT greater than 142 MPa; (b) weight NOT less than 300 kg and NOT greater than 4 000 kg Op. 17.08.2012 Dec. 12.11.2012 - TC 1230420 METERING VALVES, DUST DISCHARGE VALVE, BLAST FURNACE Op. 13.08.2012 Dec. 22.10.2012 - TC 1229635

8481.80.90 8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 8481.80.90 8481.80.90 VALVES, NEEDLE, SUBSEA Op. 05.06.2012 Dec. 03.09.2012 - TC 1219124

TEST PLUGS, TEMPERATURE AND/OR PRESSURE, WATER AND/OR GAS PIPE Op. 14.06.2012 Dec. 03.09.2012 - TC 1220328 VALVE ASSEMBLIES, SUBSEA OIL AND/OR GAS WELL CONTROL, whether OR not assembled, having a working pressure NOT less than 650 bar, incorporating ALL of the following: (a) actuators; (b) hydraulic valves; (c) connectors; (d) piping; (e) protection frame; (f) swivel Op. 11.05.2012 Dec. 23.07.2012 - TC 1215647 VALVES, PIPE SLEEVE, OIL AND/OR GAS PRODUCTION, hydraulic, drillable AND/OR closable, having a ball seat Op. 23.04.2012 Dec. 23.07.2012 - TC 1212955 HYDRAULIC VALVE SYSTEM, incorporating a control valve assembly, including NOT less than three of the following: (a) hose AND fittings; (b) electric joystick; (c) electronic valve controller; (d) pre-set flow control; (e) integrated multi-coupler; (f) accumulator Op. 26.04.2012 Dec. 16.07.2012 - TC 1213383 VALVES, PISTON BOTTOM OUTLET, complying with American Society of Mechanical Engineers B16.34-2009 (ASME B16.34-2009) Class 600 having BOTH of the following: (a) diameter NOT less than 80 mm; (b) operating pressure NOT less than 2.4 MPa Op. 26.04.2012 Dec. 09.07.2012 - TC 1213502 SLIDE VALVES, CATALYST, having BOTH the following: (a) single OR double disc; (b) refractory lining Op. 11.04.2012 Dec. 09.07.2012 - TC 1211600 CHRISTMAS TREES, GEOTHERMAL, on shore, nickel-chromium-based alloy clad, having BOTH of the following: (a) nickel content NOT less than 58%; (b) chromium content NOT less than 20% Op. 15.02.2012 Dec. 07.05.2012 - TC 1205015 VALVES, SUBSEA OIL AND GAS WELL TESTING, being ANY of the following: (a) retainer valves; (b) ball valves; (c) bleed off valves Op. 08.02.2012 Dec. 01.05.2012 - TC 1204371 VALVE ASSEMBLIES, OIL AND/OR GAS WELL PRESSURE TESTING, surface operated, including ALL of the following: (a) lubricator ball valves; (b) centralisers; (c) spacers Op. 08.02.2012 Dec. 01.05.2012 - TC 1204362

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 8481.80.90 VALVES, DOSING, DIESEL EXHAUST Op. 20.12.2011 Dec. 26.03.2012 - TC 1142140

VALVES, BALL, full bore, antistatic controlled, including ALL of the following: (a) floating OR trunnion mounted ball; (b) carbon steel body; (c) split body OR top entry; (d) uni-directional OR bi-directional Op. 06.01.2012 Dec. 19.03.2012 - TC 1200690 VALVES, BUTTERFLY, polyethylene body, spigot ended, having a bore NOT less than 300 mm Op. 06.12.2011 Dec. 07.03.2012 - TC 1140557 VALVES, GATE, water cooled body, with OR without actuators Op. 29.11.2011 Dec. 07.03.2012 - TC 1139707 THROTTLE BODIES, with OR without throttle position sensor Op. 09.12.2011 Dec. 16.02.2012 - TC 1203627 VALVES, single piece cast iron body, stainless steel spindle, having a maximum operating pressure rating NOT less than 2 450 kPa and NOT greater than 5 400 kPa being EITHER of the following: (a) shouldered end connection butterfly valves; (b) screw AND/OR shouldered end connection ball valves Op. 30.11.2011 Dec. 13.02.2012 - TC 1139723 VALVES, THERMOSTATIC, REFRIGERATION AND/OR AIR CONDITIONING Op. 31.10.2011 Dec. 16.01.2012 - TC 1136192 DOUBLE CONE VALVES, SINTER PLANT WASTE GAS MAINS Op. 18.10.2011 Dec. 12.01.2012 VALVE MODULES, MOLECULAR SIEVE, skid mounted Op. 30.09.2011 Dec. 04.01.2012 - TC 1134871 - TC 1133330

8481.80.90

8481.80.90 8481.80.90 8481.80.90

8481.80.90 8481.80.90 8481.80.90 8481.80.90

VALVES, CONICAL, incorporating BOTH of the following: (a) conical discharge valve; (b) conical suction valve Op. 27.09.2011 Dec. 19.12.2011 - TC 1132921 VALVES, incorporating BOTH of the following: (a) conical discharge valve; (b) disc suction valve Op. 27.09.2011 Dec. 19.12.2011 FOOT ACTUATED VALVES Op. 19.09.2011 Dec. 12.12.2011

8481.80.90

- TC 1132920 - TC 1131850

8481.80.90 8481.80.90

DISPENSERS, BEER BOTTLE, consisting of EITHER of the following: (a) bottle top dispensing head with lever operated tap; (b) bottle top closure cap, including ALL of the following: (i) check valve; (ii) pressurized carbon dioxide cartridge; (iii) dispensing tube Op. 16.09.2011 Dec. 05.12.2011 - TC 1131717 CHRISTMAS TREES, OIL AND GAS WELL, SUBSEA Op. 28.07.2011 Dec. 12.10.2011 - TC 1125312

8481.80.90 8481.80.90

VALVES, THERMOSTATIC EXPANSION, AUTOMOTIVE AIR CONDITIONING Op. 26.07.2011 Dec. 17.10.2011 - TC 1124697

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 SUBSEA CONTROL MODULES, OIL AND GAS PRODUCTION, having ALL of the following: (a) filter blocks; (b) valves; (c) dampeners; (d) bladders; (e) water detector; (f) hydraulic couplers; (g) pressure transducers Op. 22.06.2011 Dec. 28.09.2011 - TC 1120362 VALVES, BUTTERFLY, double flanged, ductile iron, including BOTH the following: (a) bore size NOT less than 600 mm and NOT greater than 1 200 mm; (b) pressure rating greater than Pressure Nominal (PN) 25 Op. 01.06.2011 Dec. 22.08.2011 - TC 1117346 VALVES, JET AIR PULSE, BAGHOUSE FILTER, solenoid operated Op. 04.05.2011 Dec. 25.07.2011 - TC 1114139 VALVES, PLUG, pressure balanced, lubricated Op. 27.04.2011 Dec. 18.07.2011 - TC 1113794

8481.80.90

8481.80.90 8481.80.90 8481.80.90

VALVES, STOP, bellows sealed, in-line stop mechanism, manually operated Op. 12.04.2011 Dec. 04.07.2011 - TC 1112268 VALVES, SHUT OFF, hydraulic control, pressure differential activated Op. 12.04.2011 Dec. 04.07.2011 - TC 1112267 GATE VALVES, MATERIAL CHARGING, BLAST FURNACE Op. 09.03.2011 Dec. 30.05.2011 - TC 1108559

8481.80.90

8481.80.90 8481.80.90

VALVES, multi-port, 6-way, having BOTH of the following: (a) sight glass; (b) oil filled pressure gauge Op. 16.02.2011 Dec. 09.05.2011 - TC 1106304 VALVES, EXHAUST GAS RECIRCULATION Op. 04.02.2011 Dec. 29.04.2011 - TC 1104965

8481.80.90 8481.80.90

GATE VALVES, having a diameter NOT less than 1 200 mm Op. 20.09.2010 Dec. 09.03.2011 - TC 1043104 VALVES, SLIDE AND/OR SLIDE GATE, DUST DISCHARGE, BLAST FURNACE Op. 13.12.2010 Dec. 07.03.2011 - TC 1054348 VALVE ASSEMBLIES, ACTUATED, complying with BOTH American Society of Mechanical Engineers standard ASME B16.34a-1998 AND American Petroleum Institute standard API Specification 6FA, July 2006, including ALL of the following: (a) split body trunnion mounted ball valve; (b) pneumatic spring return actuator; (c) limit switch; (d) three way solenoid valve Op. 07.12.2010 Dec. 28.02.2011 - TC 1053513 VALVES, METERING, GAS AND LIQUID FUEL, DC voltage NOT greater than 32 V Op. 24.09.2010 Dec. 20.12.2010 - TC 1043751

8481.80.90 8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 SUBSEA ISOLATION VALVE STATIONS, OIL AND GAS PIPELINE, including ALL of the following: (a) hydraulically actuated subsea ball valve module; (b) retrievable actuator; (c) umbilical controls; (d) umbilical; (e) subsea pipeline connectors Op. 23.09.2010 Dec. 20.12.2010 - TC 1043568 OSCILLATION DAMPERS, FLARE STACK, hydraulic Op. 15.09.2010 Dec. 06.12.2010 - TC 1042410

8481.80.90 8481.80.90

VALVES, BALL, flanged end connection, split body, lockable, lever OR gearbox operated, trunnion mounted ball OR floating ball, having ALL of the following: (a) DN (diameter nominal) NOT less than 15 mm and NOT greater than 250 mm; (b) rating complying with American Society of Mechanical Engineers B16.34a-1998 (ASME B16.34a-1998); (c) inlet pressure NOT less than 1 800 kPA at 38 degrees Celsius Op. 03.09.2010 Dec. 15.11.2010 - TC 1041369 VALVES, FLOW CONTROL, downhole, binary Op. 05.08.2010 Dec. 01.11.2010 - TC 1035948

8481.80.90

8481.80.90

VALVES, SAMPLING, carbon OR alloy steel, forged, manually operated, complying with ALL of the following: (a) manufactured in accordance with American National Standard Institute B16.34-1996 (ANSI B16.34-1996); (b) pressure rating to ANY of the following: (i) ANSI 150; (ii) ANSI 300; (iii) ANSI 600, (c) end connections either screwed or flanged Op. 27.07.2010 Dec. 25.10.2010 - TC 1034333 VALVES, FLOW CONTROL, DOWNHOLE, surface actuated, having a maximum working pressure NOT less than 10 MPa Op. 09.09.2010 Dec. 06.12.2010 - TC 1041726 VALVES, AXIAL FLOW, having a bore diameter NOT less than 140 mm Op. 16.07.2010 Dec. 06.10.2010 - TC 1032533 VALVES, SLOW RETURN, BOOM AND BUCKET HYDRAULIC CYLINDER Op. 13.07.2010 Dec. 11.10.2010 - TC 1031935 VALVES, BUTTERFLY, LUGGED WAFER, lever operated, bi-directional tight shut off, having ALL of the following: (a) DN(Diameter Nominal) NOT less than 50 mm and NOT greater than 200 mm; (b) synthetic rubber seat; (c) cast carbon steel body complying with American Society for Testing and Materials ASTM A216/A 216M-93(Re-approved 2003), WCB Grade; (d) aluminium bronze disc; (e) rating complying with American Society of Mechanical Engineers ASME B16.34a-1998, Class 150 Op. 21.05.2010 Dec. 02.08.2010 - TC 1022969 VALVES, BALL, flanged end connection, split body, lockable, lever OR gearbox operated, trunnion mounted ball OR floating

8481.80.90

8481.80.90 8481.80.90 8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


ball, having ALL of the following: (a) DN(Diameter Nominal) NOT less than 15 mm and NOT greater than 200 mm; (b) rating complying with American Society of Mechanical Engineers ASME B16.34a-1998; (c) inlet pressure NOT less than 1 800 kPA at 38 degrees Celsius Op. 21.05.2010 Dec. 02.08.2010 - TC 1022803 8481.80.90 8481.80.90 8481.80.90 REGULATORS, PRESSURE CONTROLLING, pilot spring actuated Op. 31.12.2009 Dec. 22.03.2010 - TC 0950588 BUTTERFLY SPLIT CONTAINMENT VALVES Op. 27.04.2010 Dec. 19.07.2010 - TC 1019063

VALVES, BALL, cast iron, comprising ALL of the following: (a) working pressures NOT exceeding 3.4 MPa (500 psi); (b) with OR without lockout; (c) bore end dimensions NOT less than 19 mm and NOT greater than 51 mm; (d) end connection types, including ANY of the following: (i) BSPF x BSPF (British Standard Pipe Female); (ii) A-type x A-type (European Air Coupling); (iii) BSPF x A-type; (iv) SL x SL (Surelock); (v) NPT x NPT (National Pipe Thread USA); (vi) Shouldered Coupling x BSPF Op. 15.03.2010 Dec. 11.06.2010 - TC 1012858 VALVES, GAS COOKTOP, having a thermo-electric flame failure safety switch Op. 05.09.2005 Dec. 25.11.2005 - TC 0511815 VALVES, SAFETY, STEAM, pneumatically servo loaded having BOTH of the following: (a) operating pressure NOT less than 9 500 kPA; (b) operating temperature NOT less than 315 degrees centigrade Op. 24.02.2006 Dec. 04.08.2006 - TC 0604352 VALVES, SHUT OFF, LOCOMOTIVE DOORS Op. 19.04.2006 Dec. 07.07.2006 VALVES, GAS COOKER Op. 26.07.2006 Dec. 13.10.2006 - TC 0607165 - TC 0612483

8481.40.00

8481.40.00

8481.40.00 8481.40.00 8481.40.00

VALVES, STEAM, having ALL of the following: (a) inlet size NOT less than 3 cm (1 1/4 inches) and NOT greater than 16 cm (6 inches); (b) inlet pressure rating complying with American National Standards Institute Class 1500 OR 2500 OR 3000 OR 4500; (c) setting and testing in compliance with American Society of Mechanical Engineers Boiler and Pressure Vessel Code Sections I; (d) operating temperature NOT less than minus 30 degrees Celsius and NOT greater than 610 degrees Celsius; (e) flanged OR welded connections; (f) open bonnet construction with exposed spring and ifting lever Op. 15.08.2006 Dec. 08.12.2006 - TC 0613540 VALVES, VENT, BLAST FURNACE Op. 12.04.2007 Dec. 29.06.2007 - TC 0705406

8481.40.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.40.00 VALVES, PRESSURE RELIEF, OIL, safety spring operated, oil tight to oil at 100 degrees centigrade up to pressure 4 bars Op. 17.01.2008 Dec. 04.04.2008 - TC 0801248 VALVES, GAS, BACKPRESSURE REGULATING, manual adjustment, spring loaded, having ALL of the following: (a) relief pressure NOT less than 2 pounds per square inch gauge and NOT greater than 40 pounds per square inch gauge; (b) gas flow NOT less than 83 Standard m3/h and NOT greater than 105 Standard m3/h; (c) stainless steel body; (d) body size NOT less than 15 mm Op. 10.12.2008 Dec. 06.03.2009 - TC 0843452 SAFETY AND SHUT-OFF BLOCK, hydraulic fluid control, having ALL of the following: (a) ball valve shut off; (b) relief valve; (c) discharge valve Op. 14.01.1993 Dec. 19.04.1993 - TC 9300991 VALVES, SAFETY SHUT-OFF, plug, integrated with spring to close pneumatic or hydraulic actuator, maximum body working pressure 68 950 kPa Op. 21.05.1993 Dec. 20.08.1993 - TC 9304942

8481.40.00

8481.40.00

8481.40.00

8481.40.00

VALVES, PRESSURE RELIEF, LIQUEFIED PETROLEUM GAS OR ANHYDROUS AMMONIA, external, hydrostatic, having BOTH of the following: (a) no rated flow capacity; (b) male NPT (National Pipe Taper) connection NOT greater than 12.7 mm Op. 18.09.1995 Dec. 22.12.1995 - TC 9510637 VALVES, excess flow, gas discharge, having BOTH of the following: (a) operating pressure from 13 KPa to 42 000 KPa (both inclusive); (b) spring loaded actuation Op. 30.10.1995 Dec. 02.02.1996 - TC 9511578 VALVES, GAS, SAFETY SHUT OFF, having ALL of the following: (a) bore size NOT exceeding 25 mm; (b) solenoid operated safety circuit Op. 18.02.1997 Dec. 29.04.1997 - TC 9701462 SUB-SURFACE SAFETY VALVES, OIL OR GAS WELL, being EITHER of the following: (a) surface controlled, downhole hydraulic pressure line; OR (b) ambient well-pressure controlled Op. 03.03.1997 Dec. 09.05.1997 - TC 9701860 VALVES, EXCESS FLOW, LIQUIFIED PETROLEUM GAS AND ANHYDROUS AMMONIA, having a tank connection size of 19 mm OR greater Op. 09.02.1998 Dec. 24.04.1998 - TC 9801192 RELIEF VALVE MANIFOLDS, LPG, containing up to four relief valves Op. 30.04.1998 Dec. 17.07.1998 - TC 9803607 VALVES, SAFETY, having BOTH of the following: (a) male by female threads; (b) an operating pressure of 714 MPa (10 000 psi) OR greater Op. 05.11.1998 Dec. 15.01.1999 - TC 9809846

8481.40.00

8481.40.00

8481.40.00

8481.40.00

8481.40.00 8481.40.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.40.00 8481.40.00 8481.40.00 8481.80 8481.80 VALVES, DRILL PIPE FLOAT Op. 20.11.1998 Dec. 01.02.1999 - TC 9810220

VALVES, SAFETY, FUEL, PETROL DISPENSER, emergency shut off Op. 03.02.1999 Dec. 16.04.1999 - TC 9900875 VALVES, HYDRAULIC, anti-cavitation Op. 02.09.1999 Dec. 19.11.1999 VALVES, SUCTION, airless spray painting system Op. 24.01.1984 Dec. 08.05.1984 - TC 9906727 - TC 8430269

VALVES, DOWN-HOLE TOOL TESTING, oil and gas exploration or well development Op. 20.02.1984 Dec. 08.05.1984 - TC 8430549 VALVES, RADIATOR, regulating, hand wheel and lock shield types, orifice 10 mm to 20 mm (both inclusive) Op. 01.07.1983 Dec. 01.07.1983 - TC 8430778 VALVES, MULTI-DIRECTIONAL CONTROL, agricultural sprayer, working pressure 1 400 kPa or greater but NOT exceeding 6 000 kPa Op. 01.07.1983 Dec. 01.01.1988 - TC 8431898 VALVES, PRESSURE DIFFERENTIAL, sensing for diesel engine, safety shut down system, operating on engine lubricating oil Op. 05.07.1984 Dec. 27.05.1985 - TC 8432181 VALVES, RADIATOR, thermostatic, central heating OR hot water systems, but NOT including EITHER of the following: (a) pneumatically operated valves; (b) automotive engine thermostats Op. 02.08.1984 Dec. 02.08.1984 - TC 8432506 CONTROLS, level, refrigeration Op. 12.06.1984 Dec. 12.06.1984 - TC 8437960

8481.80

8481.80

8481.80

8481.80

8481.80 8481.80

DAMPENERS, variable gauge, self-actuated, having a normal working pressure of 20 MPa or greater Op. 12.06.1984 Dec. 12.06.1984 - TC 8437964 FLOW DIVIDERS, inlet to outlet, hydraulic circuit Op. 12.06.1984 Dec. 12.06.1984 - TC 8437968

8481.80 8481.80

SIPHON HEADS, liquid release control, soda water bottle or siphon Op. 12.06.1984 Dec. 12.06.1984 - TC 8437969 BRANCH PIPES, fire hose, incorporating adjustable nozzles Op. 12.06.1984 Dec. 12.06.1984 - TC 8438620 FITTINGS, tube and pipe, pneumatic energy saving, with plated brass bodies, and incorporating a valve to provide two-way control of compressed air Op. 12.06.1984 Dec. 12.06.1984 - TC 8438621 STOPCOCKS, sterile, disposable, intravenous therapy control Op. 12.06.1984 Dec. 12.06.1984 - TC 8438640 VALVES, AEROSOL, metered dose, having a dosage of 25 mL, 50 mL or 50 mg to 100 mg (both inclusive) Op. 12.06.1984 Dec. 12.06.1984 - TC 8438645

8481.80 8481.80

8481.80 8481.80

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80 VALVES, BALL, two-way, having port sizes of less than 8 mm and a working pressure of 50 MPa or greater Op. 12.06.1984 Dec. 12.06.1984 - TC 8438649 VALVES, SUCTION OR DISCHARGE, multi-plate, air or gas compressor Op. 12.06.1984 Dec. 12.06.1984 - TC 8438662 VALVES, REGULATING AND PARKING CONTROL, air operated windscreen-wiper Op. 12.06.1984 Dec. 12.06.1984 - TC 8438671 VALVES, SONIC, compressed air pipeline, constant preset flow rate maintenance Op. 12.06.1984 Dec. 12.06.1984 - TC 8438674 VALVES, OXYGEN DEPLETION PILOT, domestic gas space heater Op. 12.06.1984 Dec. 12.06.1984 - TC 8438677 VALVES, ANTI-FREEZE Op. 12.06.1984 Dec. 12.06.1984 - TC 8438678

8481.80 8481.80

8481.80

8481.80 8481.80 8481.80

VALVES, DELIVERY, diesel engine fuel injection pump Op. 12.06.1984 Dec. 12.06.1984 - TC 8438683 VALVES, FLOW CONTROL, manifold, actuator speed, pressure rating of 20.7 MPa or greater Op. 12.06.1984 Dec. 12.06.1984 - TC 8438697 VALVES, FLOW CONTROL, pressure compensated, two port, pressure rating NOT less than 34.48 MPa Op. 12.06.1984 Dec. 12.06.1984 - TC 8438698 VALVES, DIRECTIONAL CONTROL, hydraulic, having a flow capacity of NOT less than 378.5 L/min and a maximum working pressure of NOT less than 13.8 MPa Op. 12.06.1984 Dec. 12.06.1984 - TC 8438699 VALVES, HYDRAULIC, gauge isolator, shock damage preventive, having NOT less than 6 stations Op. 12.06.1984 Dec. 12.06.1984 - TC 8438700 VALVES, HYDRAULIC, subplate type, roller cam or manually operated, capable of maximum working pressures of 35 MPa or less Op. 12.06.1984 Dec. 12.06.1984 - TC 8438701 VALVES, HYDRAULIC, surge damping, maximum working pressure exceeding 30 MPa Op. 12.06.1984 Dec. 12.06.1984 - TC 8438702 VALVES, PRESSURE SEQUENCING, hydraulic, pilot operated, working pressure 2 000 kPa or greater but NOT exceeding 70 000 kPa Op. 12.06.1984 Dec. 12.06.1984 - TC 8438708 VALVES, OIL FIRING, full flow control, piston type closure member, adjustable to provide exact fuel/air ratio that is maintained over 19 or more settings Op. 26.06.1984 Dec. 26.06.1984 - TC 8438719 VALVES, BALL, hydraulic oil control, three-way, four-way or five-way, manually set, pressure rating exceeding 5 MPa Op. 26.06.1984 Dec. 26.06.1984 - TC 8438720

8481.80

8481.80

8481.80

8481.80

8481.80

8481.80

8481.80

8481.80

8481.80

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80 VALVES, OIL CONTROL, hydraulic spool type directional, heavy duty truck power steering assembly Op. 26.06.1984 Dec. 26.06.1984 - TC 8438721 VALVES, BALL, hydraulic oil control, manually actuated, manifold block mountable, maximum working pressure NOT less than 32 MPa, sizes 10 mm or greater but NOT exceeding 32 mm Op. 26.06.1984 Dec. 26.06.1984 - TC 8438722 VALVES, SINGLE GAUGE ISOLATOR, oil hydraulic system, manually actuated Op. 26.06.1984 Dec. 26.06.1984 - TC 8438727 VALVES, THERMOSTATIC, liquid petroleum gas or natural gas absorption refrigerator Op. 26.06.1984 Dec. 26.06.1984 - TC 8438750 VALVES, TUBE PIERCING, compressor refrigerant charging Op. 26.06.1984 Dec. 26.06.1984 - TC 8438752 VALVES, SEQUENTIAL WATER METERING Op. 26.06.1984 Dec. 26.06.1984 VALVES, SOLENOID, dental chair or dental unit Op. 26.06.1984 Dec. 26.06.1984 - TC 8438755 - TC 8438757

8481.80

8481.80

8481.80

8481.80 8481.80 8481.80 8481.80

VALVES, SUB-SEA PRODUCTION TEST OR SUB-SEA LUBRICATOR, offshore well testing Op. 26.06.1984 Dec. 26.06.1984 - TC 8438766 VALVES, VACUUM, capable of withstanding vacuums to 13.3 pPa or greater and bake out temperature, when open, of 450 degrees C or greater Op. 26.06.1984 Dec. 26.06.1984 - TC 8438769 VALVES, VACUUM, gate, suitable for operating pressures of 0.13 MPa or less Op. 26.06.1984 Dec. 26.06.1984 - TC 8438770 VALVES, CONTROL, commercial vehicle braking system, modulating, hand operated with locking device, having 1 supply port, 2 common delivery ports, 2 common exhaust ports, a working pressure of 550 kPa or greater but NOT exceeding 725 kPa Op. 12.06.1984 Dec. 12.06.1984 - TC 8439566 VALVES, CONTROL, hydraulic power system, maximum operating pressure NOT less than 68.9 MPa Op. 12.06.1984 Dec. 12.06.1984 - TC 8439627 VALVES, HYDRAULIC, directional control, bankable, cast iron and/or steel construction, maximum operating pressure NOT less than 25 MPa, incorporating in each working section EITHER of the following: (a) pressure compensated flow control elements; (b) electro-modulated actuators Op. 03.05.1985 Dec. 21.03.1986 - TC 8531547 VALVES, OIL HYDRAULIC, servo or proportional, electrohydraulic, consisting of a polarised electric force or torque motor, having 1, 2 or 3 stages of hydraulic power amplification, operating pressure of 7 000 kPa or greater Op. 28.05.1985 Dec. 02.10.1985 - TC 8532174

8481.80

8481.80

8481.80

8481.80

8481.80

8481.80

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80 FUEL INJECTION EQUIPMENT, motor vehicle engine, being ANY of the following: (a) pressure dampers; (b) pressure regulators; (c) valves, being ANY of the following: (i) auxiliary air; (ii) cold start; (iii) fuel injection; (iv) throttle Op. 03.06.1985 Dec. 08.10.1985 - TC 8532292 VENTILATING UNITS, roof, thermostatically responsive, non-electric Op. 24.06.1985 Dec. 26.11.1986 - TC 8532844 VALVES, THERMOSTATIC, capable of controlling coolant temperatures in diesel engines rated at 57 kW or greater Op. 07.11.1985 Dec. 07.01.1986 - TC 8532860 VALVES, URINE DRAINAGE BAG OR APPLIANCE, including catheters OR tubing Op. 04.07.1985 Dec. 15.10.1985 - TC 8532873 VALVES, INFLATABLE LIFE JACKET, being ANY of the following AND complying with ANY of the Specifications contained in THE TABLE: (a) oral inflation valves; (b) inflator valves; (c) inflation mechanism valves; (d) automatic inflation mechanism valves; (e) deflation valves; (f) relief valves THE TABLE (a) Air Navigation Orders Part 103; (b) Australian Standards AS 1512; (c) Department of Defence Specifications Op. 26.06.1985 Dec. 21.05.1986 - TC 8533161 THERMOSTATS, outboard motor, having a base and cap of polyphenylene sulphide with 40% glass fibre reinforcement Op. 23.07.1985 Dec. 14.10.1985 - TC 8533258 VALVES FOR VEHICLES which, if imported, would fall within Chapter 87 of the Customs Tariff Act 1987, being parts which are 30 years old or more For the purposes of TC 8533509 it is the importer"s responsibility to establish that the parts were manufactured 30 years or more prior to the date of importation Op. 28.06.1985 Dec. 27.09.1985 - TC 8533509 TAPS, spigot, incorporating a tail pipe to allow air to flow back through the tap into the container whilst pouring Op. 29.07.1985 Dec. 13.01.1986 - TC 8533592 VALVES, NEEDLE, diesel engine fuel injector Op. 03.09.1985 Dec. 24.02.1986 - TC 8534138

8481.80 8481.80

8481.80

8481.80

8481.80

8481.80

8481.80

8481.80 8481.80

NIPPLES, poultry watering system, of plastic covered stainless steel or brass construction Op. 28.08.1985 Dec. 13.02.1986 - TC 8534191 VALVES OR VALVE ASSEMBLIES, EXHALATION, ventilator breathing circuits Op. 30.10.1985 Dec. 01.04.1986 - TC 8535217

8481.80

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80 8481.80 8481.80 REGULATORS, pressure, precision, gas chromatography Op. 02.12.1985 Dec. 01.04.1986 - TC 8535309 NOZZLES, liquid petroleum gas, motor vehicle refuelling Op. 23.12.1985 Dec. 21.03.1986 - TC 8632082 PREVENTERS, blow-out, but NOT including hose assemblies Op. 15.10.1985 Dec. 29.08.1986 - TC 8633972 VALVES, BALL, 1/2", brass bodied, incorporating male copper flare connections, with pressure rating of 6 000 kPa at 25 degrees C temperature rating Op. 25.02.1987 Dec. 26.07.1990 - TC 8732870 VALVES, pulse width modulated, 12 V DC or 24 V DC solenoid actuated, two way or three way, capable of being opened in at least 4 ms Op. 23.07.1987 Dec. 21.12.1989 - TC 8734107 VALVES, VACUUM INTERFACE, being components of vacuum sewerage systems Op. 04.09.1987 Dec. 02.06.1988 - TC 8734551 VALVES, REFRIGERATION OR AIR-CONDITIONING, NOT being manually operated valves, being ANY of the following: (a) expansion valves; (b) pressure or temperature regulating valves, non-aqueous refrigerant; (c) reversing valves, pilot or solenoid, NOT being hot gas defrost or by pass types; (d) straight through type valves, solenoid, orifice 50.8 mm or greater Op. 10.09.1987 Dec. 03.03.1989 - TC 8734614 FLOW CONTROL EQUIPMENT, intravenous or intra-arterial therapy, being ANY of the following: (a) manifolds; (b) stopcocks; (c) valves Op. 27.10.1987 Dec. 28.07.1988 - TC 8735146 VALVES, SPHYGMOMANOMETER Op. 07.12.1987 Dec. 17.05.1988 - TC 8735883 - TC 8801117

8481.80

8481.80

8481.80

8481.80

8481.80

8481.80 8481.80 8481.80

REGULATORS, milking machine vacuum level Op. 04.02.1988 Dec. 20.05.1988

VALVES, EMERGENCY, power station steam turbine, being ANY of the following: (a) governor valves; (b) interceptor valves; (c) stop valves; (d) throttle valves Op. 08.02.1988 Dec. 24.03.1988 - TC 8801174 VALVES, IMPULSE SURGE IRRIGATION Op. 22.02.1988 Dec. 05.05.1988 - TC 8801839

8481.80 8481.80

VALVES, DIAPHRAGM, aseptic, having stainless steel (specs BS970 Grade 316S11) (AISI 316L) forged bodies, less than 25 mm valve size Op. 02.05.1988 Dec. 27.10.1989 - TC 8804723

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80 8481.80 8481.80 8481.80 8481.80 CONTROL PODS, hydraulic, sub-sea Op. 22.06.1988 Dec. 24.11.1988 POST-MIX BAR DISPENSERS, flexible hose type Op. 08.11.1988 Dec. 27.04.1990 - TC 8808428 - TC 8810129

VALVES, carbonated beverage container filling machine Op. 06.03.1989 Dec. 20.06.1989 - TC 8903725 VALVES, post-mix beverage dispensing Op. 16.06.1989 Dec. 27.04.1990 - TC 8904743

VALVES, two stage solenoid controlled, three way pneumatic, capable of increasing, holding, or decreasing pressure in air brake actuators within automotive anti-lock braking systems Op. 23.09.1989 Dec. 25.03.1991 - TC 8907583 FLASHBACK ARRESTORS, gas regulator outlet Op. 08.12.1989 Dec. 17.12.1990 - TC 9000467

8481.80 8481.80 8481.80

NIPPLES, poultry watering system, of stainless steel Op. 29.06.1990 Dec. 19.02.1991 - TC 9004714 VALVES, combination, gas, electrically operated, being EITHER or BOTH of the following: (a) operating on 750 mV; (b) with a maximum stated capacity for natural gas exceeding 10 cu m/h, but NOT including valves with inlet and outlet sizes greater than 25.4 mm Op. 21.04.1988 Dec. 16.07.1990 - TC 9005169 PROPORTIONAL GAS MIXERS Op. 27.06.1990 Dec. 17.12.1990 - TC 9005670 - TC 9007471

8481.80 8481.80 8481.80

VALVES, oilwell drilling, mud control Op. 16.05.1990 Dec. 11.02.1991

ARRESTORS, dry, flashback, gas welding or cutting equipment, having a sintered element NOT exceeding 20 mm in diameter Op. 31.05.1989 Dec. 11.12.1990 - TC 9009354 VALVES, ball, 3/8", BSP and SAE male copper flare inlet and outlet connections Op. 30.10.1990 Dec. 21.02.1991 - TC 9009375 VALVE ASSEMBLIES, row, bio-chemistry analyser Op. 26.06.1989 Dec. 27.06.1991 - TC 9102984

8481.80

8481.80 8481.80

VALVES, double seat, stainless steel complying with ALL of the following: (a) sanitary construction; (b) clean in place (CIP) operation; (c) automatic valve capable of separating the flow of two different fluid systems utilising two seats with atmospheric break resulting in leakages draining directly to atmosphere; (d) part sizes from 25 mm to 153 mm Op. 01.07.1991 Dec. 29.01.1992 - TC 9106170 VALVES, SOLENOID OPERATED, oil hydraulic cartridge style, two, three and four way direction, pressure rating 6.9 MPa or greater Op. 05.08.1991 Dec. 10.02.1992 - TC 9107137 MINIATURE SOLENOID VALVES 2 AND 3 WAY, having ALL of the following: (a) operating pressure to 30 PSI;

8481.80

8481.80

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


operating voltage 5, 9, 12, 24 VDC; power consumption as low as 280 mW; response time as low as 1 milli-second; internal volume 99 uL, port 1.37 mm O.D., 0.79 mm ID; external dimensions NOT more than 34 mm long and 13 mm diameter Op. 19.04.1990 Dec. 12.11.1991 - TC 9107798 8481.80 COUPINGS, steel, quick connect, capable of operating at pressures exceeding 34 000 kPa Op. 14.11.1991 Dec. 20.02.1992 - TC 9109951 COUPLINGS, dry break, breakaway for fluids, but NOT including ANY of the following: (a) quick release camlock couplers or adaptors; (b) quick release vapour recovery camlock couplers or adaptors Op. 14.11.1991 Dec. 20.02.1992 - TC 9109953 VALVES, PLUG, TWIN SEAL, positive shut off, double block and bleed, but NOT including ball valves Op. 02.12.1991 Dec. 20.05.1992 - TC 9200009 COUPLINGS, hydraulic hose, quick connect, being couplings having an internal diameter greater than 25.4 mm at the threaded end where the coupling is connected to the hydraulic hose Op. 20.02.1992 Dec. 26.08.1992 - TC 9202762 GOVERNORS, air brake compressor, adjustable piston type Op. 07.08.1992 Dec. 21.01.1993 - TC 9207313 FLOW CONTROL VALVES, battery operated, complete with motorized linear actuator and controller. Op. 02.10.1992 Dec. 08.02.1993 - TC 9209156 VALVES, CONCENTRIC SUCTION AND DISCHARGE, air or gas compressor, but NOT including valves with ANY non-metallic internal components Op. 07.08.1995 Dec. 07.08.1995 - TC 9508799 VALVES, GATE, brass, manually operated, having BOTH of the following: (a) screwed in bonnet; (b) British Standard Pipe (BSP) diameter NOT less than 12.7 mm and NOT greater than 50.8 mm Op. 26.03.2010 Dec. 18.06.2010 - TC 1014830 VALVES, BALL, nickel plated brass, having ALL of the following: (a) 1/4 turn on/off operation; (b) British Standard Pipe (BSP) diameter NOT less than 6 mm and NOT greater than 100 mm; (c) stainless steel handles and lock nuts Op. 26.03.2010 Dec. 18.06.2010 - TC 1014829 VALVES, BALL, brass, having ALL of the following: (a) 1/4 turn on/off operation; (b) compression fitting NOT less than 12.7 mm and NOT greater than 50.8 mm; (c) diameter NOT less than 15 mm and NOT greater than 54 mm Op. 26.03.2010 Dec. 18.06.2010 - TC 1014827 VALVES, BALL, DEZINCIFICATION (DZR) brass, having ALL of the following: (a) 1/4 turn on/off operation; (b British Standard Pipe (BSP) diameter NOT less than 6 mm and NOT greater than 100 mm; (b) (c) (d) (e) (f)

8481.80

8481.80

8481.80

8481.80 8481.80

8481.80

8481.80.90

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) watermark certification; (d) stainless steel handles and lock nuts Op. 26.03.2010 Dec. 18.06.2010 8481.80.90 - TC 1014828

TRAILERS, MANIFOLD, STIMULATION, FLUID PRESSURE, including ALL of the following: (a) trailer; (b) pump truck connections; (c) blender connections Op. 02.03.2010 Dec. 21.05.2010 - TC 1010647 VALVES, BALL, bore diameter NOT less than 475 mm Op. 18.02.2010 Dec. 14.05.2010 - TC 1008671

8481.80.90 8481.80.90

VALVES, PASSENGER TRAIN BRAKE SYSTEM, being ANY of the following: (a) relay valves; (b) dead man valves; (c) emergency brake valves; (d) solenoid valves Op. 15.02.2010 Dec. 14.05.2010 - TC 1008012 VALVES, ELECTRICAL DIRECTIONAL CONTROL PRESSURE REGULATING, consisting of BOTH of the following: (a) force control solenoids; (b) valve hydraulic module Op. 22.02.2010 Dec. 07.05.2010 - TC 1009368 TEST TREE VALVES, SUBSEA, OIL OR GAS WELL, hydraulic signal, surface control Op. 12.02.2010 Dec. 23.04.2010 - TC 1007910 BALL VALVES, brass, quarter turn, having ALL of the following: (a) integral y-strainer; (b) locking lever; (c) 15 mm (1/2") or 20 mm (3/4") or 25 mm (1") female thread; (d) pressure rating NOT greater than 2 000 kPa Op. 14.12.2009 Dec. 21.11.2012 - TC 1243807 ROTOLOCK VALVES, REFRIGERATION AND/OR AIR-CONDITIONING, having ALL of the following: (a) single rotating lock seal joint; (b) NOT less than two access ports with seal cap; (c) inlet connection NOT less than 12.7 mm (1/2") and NOT greater than 57.15 mm (2 1/4") Op. 04.11.2009 Dec. 29.01.2010 - TC 0941602 MINIMUM FLOW CONTROL VALVES, BOILER FEED PUMP, recirculation Op. 28.10.2009 Dec. 15.01.2010 - TC 0940645 VALVES, COMBINED TEST PLUG AND ISOLATING ANGLE, having ALL of the following: (a) operating pressure NOT less than 20 kPa and NOT greater than 1 600 kPa; (b) maximum test pressure NOT greater than 2 000 kPa; (c) minimum flow NOT greater than 6.5 L/min at an operating pressure of 20 kPa Op. 19.10.2009 Dec. 08.01.2010 - TC 0939172 VALVES, WELDED BALL, bi-directional, comprising ALL of the following: (a) trunnion mounted ball; (b) floating seats; (c) triple barrier sealing stem;

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(d) adaptor plate Op. 08.10.2009 8481.80.90 Dec. 30.12.2009 - TC 0937987

VALVES, SIDE ENTRY BALL, split body, comprising ALL of the following: (a) anti-blowout stem; (b) uni-directional seat and/or bi-directional seat; (c) antistatic control Op. 08.10.2009 Dec. 30.12.2009 - TC 0937986 VALVES, BALL, top-entry, comprising ALL of the following: (a) triple barrier stem seals; (b) anti-blow out stems; (c) metal backed self lubricating sleeves and bearings and thrust washers; (d) trunnion mounted balls; (e) double piston effect seats Op. 08.10.2009 Dec. 30.12.2009 - TC 0937985 NOZZLES, LIQUID FUEL, with OR without built in vapour recovery Op. 15.09.2009 Dec. 27.11.2009 - TC 0934376 BOOSTERS, FIRE MAINS, being connection devices Op. 09.09.2009 Dec. 27.11.2009

8481.80.90

8481.80.90

8481.80.90

- TC 0933526

8481.80.90

VALVES, O-PORT OR THROUGH CONDUIT, being ANY of the following: (a) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore NOT greater than 200 mm; (iii) maximum operating pressure NOT less than 700 kPa (b) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore diameter NOT less than 250 mm and NOT greater than 400 mm; (iii) maximum operating pressure NOT less than 1 650 kPa (c) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore diameter NOT less than 450 mm and NOT greater than 600 mm; (iii) maximum operating pressure NOT less than 1 050 kPa (d) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore diameter NOT less than 700 mm; (iii) maximum operating pressure NOT less than 650 kPa (e) high alloy steel, hastelloy, duplex, inconel, zirconium or titanium construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore size NOT less than 50 mm and NOT greater than 1 800 mm Op. 24.10.2008 Dec. 09.11.2009 - TC 0941425

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 CONNECTORS, OFFSHORE PLATFORM, CHEMICAL INJECTION AND HYDRAULIC FLUID UMBILICAL, comprising ALL of the following: (a) manual fluid isolation valves; (b) pressure gauges; (c) umbilical to platform fluid supply connector Op. 30.07.2009 Dec. 23.10.2009 - TC 0927438 WELLHEAD FLOWBASES, SUBSEA, HYDROCARBON PROCESSING Op. 24.07.2009 Dec. 09.10.2009 - TC 0926752 VALVES, WORKOVER SYSTEM, OIL AND GAS WELL, being ANY of the following: (a) emergency disconnect package; (b) lower riser package; (c) surface flow tree Op. 10.06.2009 Dec. 04.09.2009 - TC 0919562 BAFFLE VALVES, GLASS BOTTLE MOULD Op. 03.06.2009 Dec. 28.08.2009 - TC 0918846

8481.80.90 8481.80.90

8481.80.90 8481.80.90

BALL VALVES, manually actuated, having ALL of the following: (a) nominal bore diameter NOT less than 300 mm and NOT greater than 450 mm; (b) pressure rating at 1 000 degrees F NOT less than 19 bar and at 100 degrees F NOT greater than 150 bar, in accordance with American Society of Mechanical Engineers class 900 (ASME class 900); (c) complying with American Petroleum Institute Standard 6D (API 6D) and American Society of Mechanical Engineers Standard B16.34 (ASME B16.34) Op. 09.04.2009 Dec. 03.07.2009 - TC 0912095 BALL VALVES, hydraulically actuated, having ALL of the following: (a) nominal bore diameter NOT less than 350 mm and NOT greater than 450 mm; (b) pressure rating at 1 000 degrees F NOT less than 19 bar and at 100 degrees F NOT greater than 150 bar, in accordance with American Society of Mechanical Engineers class 900 (ASME class 900); OR pressure rating at 1 000 degrees F NOT less than 29 bar and at 100 degrees F NOT greater than 252 bar, in accordance with American Society of Mechanical Engineers class 1500 (ASME class 1500); (c) complying with American Petroleum Industry Standards 6D and 6FA (API 6D and 6FA) and American Society of Mechanical Engineers Standard B16.34 (ASME B16.34) Op. 09.04.2009 Dec. 03.07.2009 - TC 0912093 VALVES, FIRE HYDRANT, to Australian Standard 2419.2 (AS 2419.2) Op. 25.03.2009 Dec. 05.06.2009 - TC 0909931 INFLATORS AND/OR DEFLATORS, TYRE, incorporating a gauge, having a pressure rating NOT greater than 1 500 kPa Op. 25.03.2009 Dec. 05.06.2009 - TC 0910045 VALVES, FLAPPER, OIL AND GAS EXPLORATION AND PRODUCTION, hydraulically controlled, having a fail-safe spring closure Op. 23.03.2009 Dec. 05.06.2009 - TC 0909915 LINE BLIND, PIPELINE Op. 24.02.2009 Dec. 22.05.2009 - TC 0906324 - TC 0916267

8481.80.90

8481.80.90 8481.80.90

8481.80.90

8481.80.90 8481.80.90

TIMERS, TAP, spring wound with a diaphragm Op. 19.11.2003 Dec. 18.05.2009

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 VALVES, BUTTERFLY, double flanged, cast steel body and disc, comprising ALL of the following: (a) bore NOT less than 1 200 mm; (b) rated PN30 (30 bar, 435 psi); (c) hydraulic actuation; (d) bi-directional flow Op. 06.02.2009 Dec. 08.05.2009 - TC 0904148 VALVES, GATE, bronze, manually operated, having BOTH of the following: (a) screwed-in bonnet; (b) solder joint tubing ends Op. 29.01.2009 Dec. 24.04.2009 - TC 0902828 VALVE ASSEMBLIES, BLAST FURNACE TURBO BLOWER BLOW-OFF, consisting of BOTH of the following: (a) pneumatic butterfly valves; (b) two stage diffusors Op. 20.01.2009 Dec. 14.04.2009 - TC 0901909 FUEL DELIVERY SYSTEM, GAS TURBINE, simple gas, skid mounted, having BOTH of the following: (a) stop and/or ratio valve; (b) gas control valves Op. 07.01.2009 Dec. 03.04.2009 - TC 0946428 VALVES, BUTTERFLY, RECUPERATOR, having BOTH of the following: (a) diameter NOT less than 900 mm; (b) temperature rating NOT less than 390 degrees celsius Op. 21.04.2005 Dec. 02.09.2005 - TC 0504570 VALVES, ULTRA HIGH VACUUM (UHV) Op. 10.05.2005 Dec. 16.09.2005 VALVES, BALL, SUBSEA Op. 02.06.2005 Dec. 21.10.2005 - TC 0505337 - TC 0506584

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90 8481.80.90

CHRISTMAS TREES, SUBSEA WELL, GAS, BIG BORE, having a bore greater than 160 mm Op. 09.08.2005 Dec. 21.10.2005 - TC 0510514 VALVES, WALKING BEAM FURNACE, being EITHER of the following: (a) SAE threaded flange ball valves with a nominal pressure greater than 190 bar; (b) weld type ball valves with a nominal pressure NOT greater than 70 bar Op. 16.08.2005 Dec. 28.10.2005 - TC 0510727 SPINDLE VALVES, COMPRESSOR OR TURBINE Op. 06.10.2005 Dec. 23.12.2005 - TC 0513531

8481.80.90

8481.80.90 8481.80.90

VALVES, HYDRAULIC DIRECTIONAL CONTROL, having BOTH of the following: (a) pressure NOT greater than 300 bar; (b) flow rate NOT greater than 55 litres/minute Op. 26.10.2005 Dec. 16.01.2006 - TC 0514903 VALVES, GOGGLE AND/OR ISOLATING, BLAST FURNACE Op. 02.11.2005 Dec. 16.01.2006 - TC 0515320

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 PROPORTIONAL THROTTLES, HYDRAULIC RECIRCULATOR, WALKING BEAM FURNACE Op. 09.12.2005 Dec. 03.03.2006 - TC 0516782 VALVES, HYDRAULIC CONTROL, POWER STEERING GEAR Op. 10.01.2006 Dec. 31.03.2006 VALVES, HYDRAULIC CONTROL, SNOW MAKING Op. 10.03.2006 Dec. 02.06.2006 - TC 0602089 - TC 0605043

8481.80.90 8481.80.90 8481.80.90

DAMPERS, MOTORISED, PRIME AND/OR FINISH OVEN, CONTINUOUS PAINT LINE Op. 21.03.2006 Dec. 02.06.2006 - TC 0605340 VALVES, BUTTERFLY, hot shell, variable orifice Op. 31.03.2006 Dec. 23.06.2006 - TC 0606051

8481.80.90 8481.80.90

VALVES, CONTROL, ELECTRONIC THROTTLE, incorporating 12 volt DC motor Op. 04.04.2006 Dec. 23.06.2006 - TC 0606243 VALVES, GATE, SIGHT HOLE COVER, BLAST FURNACE Op. 19.04.2006 Dec. 14.07.2006 - TC 0607162

8481.80.90 8481.80.90 8481.80.90

VALVES, DIRECTIONAL PROPORTIONAL, hydraulic control Op. 24.04.2006 Dec. 14.07.2006 - TC 0607261 VALVES, RECIRCULATION, PICKLE LINE TANK, being ANY of the following: (a) pressure gauge isolation ball valves and/or pressure transmitter isolation ball valves; (b) acid drain ball valves; (c) shut-off valves Op. 24.04.2006 Dec. 14.07.2006 - TC 0607299 DIVERTERS, FLOW, AIR GRAVITY CONVEYOR, PNEUMATIC Op. 28.04.2006 Dec. 14.07.2006 - TC 0607586

8481.80.90 8481.80.90

VALVES, COMBINED STOP AND CONTROL, STEAM TURBINE, having gross weight of NOT less than 11 tonnes Op. 31.05.2006 Dec. 11.08.2006 - TC 0609486 VALVES, SHUT-OFF, ABRASIVE POWDER, PADLOCKABLE LOCKOUT ISOLATION, being EITHER of the following: (a) pivoted swing disc valves with a nominal bore (NB) diameter NOT less than 200 mm and NOT greater than 500 mm; (b) slide knife gate valves with a nominal bore (NB) diameter NOT less than 750 mm Op. 09.06.2006 Dec. 06.10.2006 - TC 0610181 MANIFOLDS, SUBSEA, comprising ALL of the following: (a) multi-phase flow meters; (b) production and gaslift choke valves having a pressure rating NOT less than 25 MPa and stepping actuators and retrievable choke inserts; (c) gate valves complying with American Petroleum Institute standard 6A (API 6A) and having a pressure rating NOT less than 25 MPa; (d) subsea control modules Op. 04.09.2006 Dec. 05.01.2007 - TC 0616597 VALVES, INJECTION DISPENSER, comprising ALL of the following: (a) top pressure regulators; (b) fluidising flow rate regulators;

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) conveying flow rate regulators Op. 08.11.2006 Dec. 19.01.2007 8481.80.90 - TC 0618382

VALVES, BLAST FURNACE, MATERIAL CHARGING, parallel bin, being ANY of the following: (a) dust discharge valves; (b) bleeder valves; (c) seal valves Op. 24.01.2007 Dec. 20.04.2007 - TC 0701480 KITS, PNEUMATIC TOOL, comprising ALL of the following: (a) paint spray guns; (b) blow guns; (c) tyre inflators and gauges; (d) air hoses; (e) dust masks; (f) air line fittings; (g) wire brushes; (h) blow gun nozzles Op. 14.03.2007 Dec. 08.06.2007 - TC 0703991 VALVES, AUTOMOTIVE, MANIFOLD TUNING, incorporating a vacuum actuator Op. 15.03.2007 Dec. 08.06.2007 - TC 0704025 VALVES, BLAST FURNACE Op. 19.03.2007 MANIFOLDS, SUBSEA Op. 26.03.2007 Dec. 08.06.2007 Dec. 15.06.2007 - TC 0704132 - TC 0704384

8481.80.90

8481.80.90

8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90

VALVES, ISOLATION GATE, DUST DISCHARGER, BLAST FURNACE Op. 29.03.2007 Dec. 15.06.2007 - TC 0705000 VALVES, SOLENOID, REFRIGERATION Op. 03.04.2007 Dec. 15.06.2007 - TC 0705008

VALVES, BALL, AIR CONDITIONER REFRIGERANT ISOLATION Op. 02.07.2007 Dec. 07.09.2007 - TC 0705643 NOZZLES, FIRE FIGHTING Op. 24.07.2007 Dec. 02.10.2007 - TC 0711894 SUBSEA SYSTEM, OIL CONSOLIDATION AND DELIVERY, comprising ALL of the following: (a) multiphase flowmeters; (b) manifolds (including valving); (c) flowlines; (d) control systems; (e) control umbilicals; (f) risers; (g) riser bases; (h) mid water arches Op. 30.10.2007 Dec. 29.01.2008 - TC 0718575 Y-TOOLS, DOWNHOLE Op. 23.01.2008 Dec. 04.04.2008 - TC 0801271

8481.80.90 8481.80.90

VALVES, SLIDE, single AND/OR double disc, hydraulic operated, comprising ALL of the following: (a) actuators; (b) oil systems; (c) power units; (d) control units Op. 23.01.2008 Dec. 04.04.2008 - TC 0801351

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 VALVES, GATE, SUBSEA, complying with American Petroleum Institute Standard (API) specification 6D Op. 11.02.2008 Dec. 18.04.2008 - TC 0802281 MODULATORS, DOWNLINK, OIL AND GAS, comprising ALL of the following: (a) pipes; (b) isolation valves; (c) modulating valves; (d) choke valves; (e) electronic controls Op. 20.02.2008 Dec. 28.04.2008 - TC 0802941 VALVES, SPHERICAL, HYDRO TURBINE INLET Op. 03.03.2008 Dec. 09.05.2008 VALVES, RELAY, AIR BRAKE, TRUCK AND/OR TRAILER Op. 20.03.2008 Dec. 06.06.2008 VALVES, OIL CONTROL, solenoid operated Op. 07.05.2008 Dec. 01.08.2008 - TC 0803421 - TC 0804437 - TC 0806940

8481.80.90

8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90

COUPLERS AND/OR NIPPLES, having a ball valve OR poppet valve Op. 15.05.2008 Dec. 08.08.2008 - TC 0808302 VALVES, BALL, BRASS (NICKEL-PLATED) actuator driven Op. 30.05.2008 Dec. 22.08.2008 - TC 0810687 TAPS, MIXER, HOT AND COLD WATER Op. 13.06.2008 Dec. 22.08.2008 COUPLINGS, BREAKAWAY, MARINE Op. 25.06.2008 Dec. 12.09.2008 PREVENTERS, BLOWOUT, OIL RIG, annular Op. 15.07.2008 Dec. 10.10.2008 - TC 0812759 - TC 0814431 - TC 0818938

FLOWHEADS, subsea well testing, oil and/or gas, having a minimum working pressure NOT less than 650 bar Op. 16.07.2008 Dec. 10.10.2008 - TC 0819324 FUEL DELIVERY SYSTEM, GAS TURBINE, Dry Low NOx (DNL), skid mounted, having EITHER of the following: (a) stop/ratio valves; (b) gas control valves Op. 18.07.2008 Dec. 10.10.2008 - TC 0820284 TAPS, MIXER, single lever, having ALL of the following: (a) ceramic cartridges; (b) operating temperature NOT greater than 80 degrees Celsius; (c) adjustable anti-scold water stop rings Op. 01.08.2008 Dec. 17.10.2008 - TC 0824440 VALVES, STEAM, PARALLEL SLIDE Op. 03.09.2008 Dec. 21.11.2008 - TC 0829430

8481.80.90

8481.80.90

8481.80.90 8481.80.90

CONNECTORS, STAB, SUBSEA PIPELINE AND/OR MANIFOLD, comprising BOTH of the following: (a) female receptacle incorporating a valve; (b) male stab Op. 16.10.2008 Dec. 14.01.2009 - TC 0835793 VALVES, O-PORT OR THROUGH CONDUIT, being ANY of the following:

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(a) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore NOT greater than 200 mm; (iii) maximum operating pressure NOT less than 700 kPa (b) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore diameter NOT less than 250 mm and NOT greater than 400 mm; (iii) maximum operating pressure NOT less than 1 650 kPa (c) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore diameter NOT less than 450 mm and NOT greater than 600 mm; (iii) maximum operating pressure NOT less than 1 050 kPa (d) steel construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore diameter NOT greater than 700 mm; (iii) maximum operating pressure NOT less than 650 kPa (e) high alloy steel, hastelloy, duplex, inconel, zirconium or titanium construction complying with ALL of the following: (i) pressure temperature rating to American National Standards Institute Specification B16.34 (ANSI B16.34); (ii) bore size NOT less than 50 mm and NOT greater than 1 800 mm Op. 24.10.2008 Dec. 26.03.2009 - TC 0836802 8481.80.90 8481.80.90 8481.80.90 BY-PASS VALVES, NON-ADVANCING, MULTI-CYCLE, OIL AND GAS WELL Op. 06.11.2008 Dec. 30.01.2009 - TC 0838649 REGULATORS, WELDING, GAS Op. 19.11.2008 Dec. 06.02.2009 - TC 0840361

VALVES, CIRCULATING, OIL AND GAS WELL, having activation balls and shut off balls Op. 20.11.2008 Dec. 27.02.2009 - TC 0840697 COUPLINGS, hydraulic, being EITHER of the following: (a) couplers; (b) nipples Op. 04.12.2008 Dec. 27.02.2009 - TC 0842804 VALVE ASSEMBLIES, BLAST FURNACE TURBO BLOWER BLOW-OFF, consisting of BOTH of the following: (a) pneumatic butterfly valves; (b) two stage diffusors Op. 20.01.2009 Dec. 14.04.2009 - TC 0901909 VALVES, BALL, double block AND bleed, having ALL of the following: (a) pressure rating complying to Australian and New Zealand Standard B16.34 (ANSI B16.34); (b) flanged end connections complying to Australian and New Zealand Standard B16.5 (ANSI B16.5) Op. 02.07.2008 Dec. 01.04.2009 - TC 0910777

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 FUEL DELIVERY SYSTEM, GAS TURBINE, simple gas, skid mounted, having BOTH of the following: (a) stop and/or ratio valve; (b) gas control valves Op. 07.01.2009 Dec. 03.04.2009 - TC 0946428 VALVES, ball, brass, having ALL of the following: (a) 1/4 on/off turn operation; (b) 1/4" BSP (6mm) to 4" BSP (100mm) (both inclusive); (c) manufactured from DR (dezincification resistant) brass; (d) with "Watermark" certification Op. 16.12.1992 Dec. 19.04.1993 - TC 9300380 BATH AND BASIN WASTE ASSEMBLIES, having ALL of the following: (a) pop-up waste plug; (b) overflow waste pipe; (c) waste outlet connection; (d) remote pop-up plug control knob Op. 07.01.1993 Dec. 19.04.1993 - TC 9300921 VALVES, BALL, two-way, hydraulic fluid control system, having ALL of the following: (a) port sizes NOT greater than 50 mm; (b) bore sizes NOT less than 93% of port sizes; (c) working pressure of 31.5 MPa or greater at 100 degrees C; (d) manual actuation; (e) NOT of the fire-safe and/or anti-static design Op. 17.06.1993 Dec. 02.12.1993 - TC 9304558 VALVES, PILOT CONTROL UNITS, giving proportional output pressure for the remote control of valves, pumps and motors Op. 18.06.1993 Dec. 24.09.1993 - TC 9304598 VALVES, SOLENOID DIRECTIONAL CONTROL, with explosion proof coils OR intrinsically safe coils Op. 18.06.1993 Dec. 24.09.1993 - TC 9304599 VALVES, tubeless tyre for passenger carrying motor vehicles, type Nos. TR412, TR413, TR414, TR414L, TR415, TR418, TR420, TR423, TR425, TR438 Op. 14.04.1993 Dec. 23.07.1993 - TC 9305216 VALVES, SERVO-PNEUMATIC POSITIONING, having ALL of the following: (a) nominal bore of 6 mm; (b) nominal pressure of 6 bar; (c) flow rate up to 700 l/min; (d) operating voltage of 24 V DC Op. 28.04.1993 Dec. 30.07.1993 - TC 9305438 VALVES, AIR BRAKE, foot operated, graduating directional control Op. 10.05.1993 Dec. 06.08.1993 - TC 9305584 VALVES, solenoid, hydraulic directional control, 20 Mpa or greater but NOT including valves having a mounting interface conforming with ANY of the following: (a) DIN 24340-A6; (b) ISO 4401-AB-03-4-A; (c) CETOP R35H 4.2-4-03; (d) NFPA DO3; (e) CETOP 3; (f) NG 6 Op. 06.08.1993 Dec. 11.08.1993 - TC 9306381 VALVES, SOLENOID, 12 V DC or 24 V AC, 3 way pilot, direct or

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


reverse mode, body made of non-corrosive glass reinforced nylon with built in hydraulic relay which converts electrical signal to hydraulic command Op. 12.07.1993 Dec. 15.10.1993 - TC 9306883 8481.80.90 VALVES, automatic air or gas release, 12 mm to 25 mm nominal diameter, having ALL of the following: (a) maximum operating pressure of 1 200 kPa; (b) polypropylene body; (c) release rate up to 50 cubic metres per hour; (d) mechanism incorporating: (i) non-metallic flexible rolling seal with non-metallic attached stem; and (ii) float of formed polypropylene Op. 12.07.1993 Dec. 29.10.1993 - TC 9306884 VALVES, 50 mm nominal diameter, air or gas relief, having ALL of the following: (a) maximum operating pressure of 1 200 kPa; (b) fibreglass reinforced nylon body; (c) release rate up to 125 cubic metres per hour; (d) mechanism incorporating: (i) non-metallic flexible rolling seal with non-metallic attached stem; and (ii) float of foamed polypropylene; (e) kinetic air release valve and automatic air release valve in a single body; (f) able to admit air during line emptying Op. 12.07.1993 Dec. 29.10.1993 - TC 9306885 VALVES, solenoid, pilot operated, having ALL of the following: (a) 15 mm (half inch) ports; (b) internal parts and body resistant to agricultural spray chemicals; (c) maximum flow rate of 65 litres per minute or greater; (d) maximum pressure rating of 50 bar or greater; (e) 12 V DC operation Op. 20.07.1993 Dec. 29.10.1993 - TC 9307044 VALVES, diesel engine air starter, being pilot operated control valves Op. 05.08.1993 Dec. 05.11.1993 - TC 9307285 VALVES, plug, having a nominal bore size 15 mm to 150 mm (both inclusive) incorporating BOTH of the following: (a) 2 and 3 way design; (b) non-lubricated tapered plug Op. 25.01.1993 Dec. 07.05.1993 - TC 9308068 VALVES, GLOBE, manually operated, stainless steel, having ALL of the following: (a) capable of operating within the temperature range of -196 degrees C to 816 degrees C; (b) manufactured in accordance with one of the following standards: (i) ANSI B2.1; (ii) ANSI B16.10; (iii) ANSI B16.34; (iv) API 6D; (v) API 597; (vi) API 598; (vii) API 600 (c) having a pressure rating of one of the following classes: (i) ANSI 150;

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(ii) ANSI (iii) ANSI (iv) ANSI (v) ANSI (vi) ANSI (vii) ANSI Op. 03.02.1993 300; 600; 900; 1500; 2500; 4500 Dec. 17.06.1993 - TC 9308171

8481.80.90

VALVES, EXPLOSION BARRIER, spring operated, maximum flow velocity 20 m/sec or less Op. 05.02.1993 Dec. 28.05.1993 - TC 9308204 CHUCKS, AIR, AUTOMOTIVE TYRE INFLATION Op. 08.02.1993 Dec. 14.05.1993 - TC 9308224

8481.80.90

8481.80.90

VALVES, single seat, stainless steel, complying with ALL the following: (a) sanitary construction; (b) clean in place (CIP) operation; (c) capable of separating the flow of two different fluid systems; (d) port sizes 25 mm to 153 mm Op. 10.02.1993 Dec. 04.06.1993 - TC 9308248 VALVES, stick on, automotive tyre Op. 16.02.1993 Dec. 21.05.1993 - TC 9308289

8481.80.90 8481.80.90

CHOKE VALVES, adjustable, for control of oil and natural gas flow in producing wells Op. 29.09.1993 Dec. 07.01.1994 - TC 9310355 VALVES, PNEUMATIC, having ALL of the following: (a) stainless steel lapped spool and floating sleeve valve mechanism with no dynamic rubber seals; (b) air bearing spool requiring no pre-lubrication or air line lubrication; (c) equal diameter cross holes in flow galleries of sleeve assembly; (d) self cleaning capability through shearing action of spool edges against the holes in the sleeve; (e) balanced spool construction permitting BOTH of the following: (i) simultaneously a vacuum and pressure to 2067 kPa; and (ii) independent of pilot pressure, full back pressure at any port and no blow-by to exhaust during spool shift Op. 13.10.1993 Dec. 21.01.1994 - TC 9310929 VALVES, directional poppet, with solenoid operation for pressure of 40 MPa or greater and leak free in closed flow direction Op. 27.10.1993 Dec. 11.02.1994 - TC 9312620 VALVES, hydraulic, pilot assisted overcentre, providing cavitation free controlled load lowering, pressure relief function and load holding, 350 bar maximum pressure setting Op. 05.11.1993 Dec. 11.02.1994 - TC 9312774 VALVES, motorcycle tyre, valve hole size 8.3 mm Op. 27.01.1994 Dec. 16.05.1994 - TC 9402063

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90

VALVES, solenoid, hydraulic control, having ALL of the following: (a) maximum flow rate of 146.2 litres per minute; (b) operating pressure of 200 kg/sq cm Op. 22.03.1994 Dec. 04.07.1994 - TC 9403773

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 VALVES, spool, manually operated, multi-directional flow and dual supply, having an operating pressure of 2 bar to 10 bar (both inclusive) Op. 25.03.1994 Dec. 13.07.1994 - TC 9403822 VALVES, diaphragm, chemical resistant body of fibreglass reinforced nylon Op. 25.07.1994 Dec. 28.10.1994 - TC 9406310 VALVES, butterfly, triple offset, metal seated, of stainless steel or carbon steel construction, having ALL of the following: (a) wafer, lugged or double flange mounting; (b) nominal bore size of 76.2 mm or greater; (c) pressure rating to ANY of the following classes: (i) ANSI 150; (ii) ANSI 300; (iii) ANSI 600; (d) capable of manual or actuator operation; (e) laminated metal or solid metal seal Op. 27.01.1995 Dec. 19.05.1995 - TC 9501185 VALVES, TUBELESS TYRE, having ANY of the following: (a) valve core with thread diameter NOT less than VG.8; (b) core housing thread diameter NOT less than 12.70 mm (32 UNF); (c) able to fit tubeless spud threads Op. 30.03.1995 Dec. 15.09.1995 - TC 9504659 VALVES, TUBELESS TYRE, AIR (a) core housing; (b) core housing thread (c) TR nos. 618A, 621A, Op. 30.03.1995 WATER, having ALL of the following: size of 9.50 mm (32 UNEF - 2A); 622A or 623A Dec. 15.09.1995 - TC 9504661

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

VALVES, hydraulic control, having ALL of the following: (a) max flow rate from 130 litres per minute to 400 litres per minute (both inclusive); (b) maximum operating pressure from 300 kg/sq cm to 320 kg/sq cm (both inclusive) Op. 20.04.1995 Dec. 29.05.1995 - TC 9505222 WITHDRAWAL VALVES, liquid or vapour, liquefied petroleum gas, having BOTH of the following: (a) male NGT (National Gas Taper) container connection of 19.05 mm; (b) CGA 510 (Compressed Gas Association) service connection, but NOT including automotive cylinder valves or valves incorporating a solenoid shut-off Op. 25.08.1995 Dec. 01.12.1995 - TC 9505386 VALVES, VACUUM, SOLENOID, having ALL of the following: (a) voltage 12 V DC; (b) power 4 W; (c) endurance pressure NOT exceeding 740 mm Hg/min; (d) operating voltage from a minimum of 8.5 V to a maximum of 14.8 V; (e) air passage NOT exceeding 4 L/min Op. 09.05.1995 Dec. 20.10.1995 - TC 9505406 VALVES, pneumatic, three way flow through, pneumatically operated pressure regulating, having a working pressure NOT exceeding 350 bar Op. 19.05.1995 Dec. 29.08.1995 - TC 9505647

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 VALVES, PIPE SIDE, 3 port, 2 way, regulating, abrasive resistant, having an axially movable unitary plunger Op. 20.07.1995 Dec. 03.11.1995 - TC 9509066 CONTROL SYSTEM, COMPRESSOR AIR INTAKE, comprising ALL of the following: (a) intake controller with inlet valve; (b) actuating piston; (c) pressure lowering non-return valve; (d) with or without solenoid and pressure switch Op. 21.08.1995 Dec. 08.12.1995 - TC 9509865 VALVES, WITHDRAWAL, LIQUID OR VAPOUR, LIQUEFIED PETROLEUM GAS, having ALL of the following: (a) integral excess check valve and shut-off valve; (b) male NGT (National Gas Taper) container connection of 19.05 mm 19.05 mm; (c) male NPT (National Pipe Taper) service connection of 9.525 mm; but NOT including automotive cylinder valves or valves incorporating a solenoid shut-off Op. 28.08.1995 Dec. 08.12.1995 - TC 9510111 VALVES, 1/4 turn ball, having ALL of the following: (a) 8 mm (1/4" BSP) to 100 mm (4" BSP) sizes inclusive; (b) treated with trichloroethylene; (c) individually sealed in plastic Op. 01.09.1995 Dec. 18.12.1995 - TC 9510249 VALVES, FINE METERING, having ALL of the following: (a) orifice diameter NOT exceeding 1.5 mm; (b) stem taper NOT exceeding 3 degrees; (c) requiring from 8 turns to 12 turns (both inclusive) to open; (d) dead space NOT exceeding 460 cu mm; (e) working pressure NOT exceeding 14 MPa Op. 09.11.1995 Dec. 08.03.1996 - TC 9511914 VALVES, VACUUM FLOW CONTROL, liquefied petroleum gas, having ALL of the following: (a) electrically actuated; (b) glass filled nylon and steel construction; (c) maximum flow rating of less than 0.4 cu m/h at 2.49 kPa, but NOT including automotive cylinder valves Op. 22.12.1995 Dec. 16.04.1996 - TC 9600755 VALVES, FLOW CONTROL, pressure compensated, two port, inlet pressure rating 12 300 kPa Op. 15.01.1996 Dec. 03.05.1996 - TC 9601653 VALVES, BRASS, three-way rotating ball, "L" or "T" ported, having ALL of the following: (a) thread sizes from 15 mm (1/2" BSP) to 50 mm (2" BSP) (both inclusive); (b) Australian Gas Association approval AG201; (c) spring-loaded handle with 360 degrees ball rotation; (d) 3 connections fully sealed with 4 self-adjusting ball seals; (e) pressure rating 2 500 kPa Op. 30.01.1996 Dec. 21.05.1996 - TC 9602402 VALVES, COMBINED CHECK AND FOOT, positive pressure and vacuum, having ALL of the following: (a) thread connection sizes from 8 mm (1/4" BSP) to 100 mm (4" BSP) (both inclusive); (b) multi-positional mounting;

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) spring loaded jumper valve; (d) filter provision Op. 01.02.1996 Dec. 17.05.1996 8481.80.90 - TC 9602516

VALVES, BALL, three-way, stainless steel, "L" or "T" ported, 1/4 turn, having female thread sizes from 10 mm (3/8" BSP) to 50 mm (2" BSP) (both inclusive) Op. 02.02.1996 Dec. 17.05.1996 - TC 9602672 NOZZLES, stainless steel Op. 06.02.1996

8481.80.90 8481.80.90

Dec. 24.05.1996

- TC 9602799

MIXERS, CLOSING, TAP AND/OR SHOWER HEAD, SINGLE LEVER, conforming to AS3718, having ALL of the following: (a) hydraulic valve; (b) pressure dampening brass piston; (c) ceramic sealing control discs; (d) pressure operated bottom seals; (e) filter screen; (f) preset water flow and temperature control Op. 21.02.1996 Dec. 31.05.1996 - TC 9603366 VALVE, BRASS BALL, 1/4 turn, 3 way diverting having ALL of the following: (a) "L" port configuration; (b) Australian Gas Association approval; (c) sizes 1/4 inch BSP to 2 inch BSP inclusive, (nominal 8 mm to 50 mm); (d) die-cast aluminium handle Op. 23.08.1996 Dec. 01.11.1996 - TC 9610039 VALVES, TUBELESS TYRE, brass, rim hole sizes 9.7 mm to 16 mm Op. 12.02.1997 Dec. 18.04.1997 - TC 9701255 GATE VALVES, carbon steel, stainless steel or high alloy steel. having ALL of the following: (a) manufactured in accordance with ANY of the following (i) BS 5352; (ii) BS 1873; (iii) BS 1414; (iv) API 600; (v) API 602 (b) pressure rated to ANY of the following: (i) ASME/ANSI 150; (ii) ASME/ANSI 300; (iii) ASME/ANSI 600; (iv) ASME/ANSI 800; (v) ASME/ANSI 900; (vi) ASME/ANSI 1500; (vii) ASME/ANSI 2500; (viii) ASME/ANSI 4500 (c) pressure temperature rating to ANSI B16.34; (d) screwed, socketweld, flanged or buttweld end connections; (e) in respect of flange mounted valves, having BOTH the following: (i) face to face dimensions to ASME/ANSI B16.10; (ii) flange end dimension and gasket face finish to ASME/ANSI B16.5 (f) in respect of buttweld end connection valves, having end to end dimensions to ASME/ANSI B16.10; (g) hydrostatic and air test pressure to API 598; (h) wall thickness to API 600, API 602 or API 603 Op. 27.03.1997 Dec. 01.07.1997 - TC 9702488

8481.80.90

8481.80.90 8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.80.90 8481.80.90 VALVES, emergency relay, air brake Op. 02.04.1997 Dec. 06.06.1997 - TC 9702621

VALVES, GATE OR GLOBE, carbon or alloy steel, forged, manually operated, complying with ALL of the following: (a) manufactured in accordance with standard ANSI B16.34; (b) pressure rating to one of the following: (i) ANSI 600; (ii) ANSI 900; (iii) ANSI 1500; (iv) ANSI 2500; (v) ANSI 4500; (c) end connections either screwed, socket welded, flanged or buttwelded Op. 08.05.1997 Dec. 22.07.1997 - TC 9704223 VALVES, oil hydraulic, load independent, proportional directional Op. 10.06.1997 Dec. 22.08.1997 - TC 9705064 VALVE POSITIONERS, pneumatic or electro-pneumatic Op. 15.07.1997 Dec. 26.09.1997 VALVES, BALL, forged titanium Op. 11.08.1997 Dec. 07.11.1997 - TC 9706326 - TC 9707031

8481.80.90 8481.80.90 8481.80.90 8481.80.90

VALVES, METERING, zinc plated steel OR stainless steel, having ALL of the following: (a) built-in outlet check valves; (b) frequency of 60 or 100 cycles/min; (c) discharge volumes per outlet after one cycle in the range of 0.08 to 88 cu cm Op. 07.11.1997 Dec. 19.01.1998 - TC 9709907 VALVES, NEEDLE, panel mountable, NOT exceeding 27 mm, integral tube end connections, pressure rated to exceed 3 000 kPa Op. 14.11.1997 Dec. 06.02.1998 - TC 9710122 VALVES, double ended, pneumatically actuated, having ALL of the following: (a) 32 mm threaded inlet/outlet ports; (b) pinch ram; (c) failsafe spring closing Op. 04.12.1997 Dec. 27.02.1998 - TC 9710661 VALVES, POSITIVE SEAL OBTURATING ELEMENT, direct solenoid or externally controlled Op. 10.12.1997 Dec. 27.02.1998 - TC 9710911 VALVES, FLOW CONTROL, being EITHER of the following: (a) hydraulic circuit flow control valves, having ALL of the following: (i) manual OR pressure operation; (ii) 2 ports; (iii) threaded connection, manifold mount OR cartridge, whether OR not incorporating a check valve; (iv) steel or stainless steel construction; (v) maximum operating pressure NOT less than 34.5 MPa; OR (b) hydraulic stop OR throttle stop, balanced piston, having ALL of the following: (i) steel OR iron and steel construction; (ii) thread, flange OR gasket mounted, whether OR not incorporating a check valve;

8481.80.90

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(iii) maximum operating pressure NOT less than 21 MPa Op. 10.12.1997 Dec. 27.02.1998 - TC 9710914 8481.80.90 VALVES, DIRECTIONAL CONTROL, iron and steel composition, fluid power hydraulic, having ALL of the following: (a) solenoid actuated pilot flow; (b) pilot operated spool; (c) flow rate NOT less than 45 l/min; (d) maximum working pressure NOT less than 24.132 MPa Op. 10.12.1997 Dec. 27.02.1998 - TC 9710922 VALVES, LOCK MANDREL AND SUBSURFACE FLOW CONTROL EQUALISING, OIL AND GAS WELL, having a pressure rating of NOT less than 34 450 kPa (5 000 psi) Op. 15.12.1997 Dec. 27.02.1998 - TC 9711104 ADAPTORS, RESTRICTION, FILLING AND UNLOADING, including an integral back check Op. 31.12.1997 Dec. 13.03.1998 - TC 9711381 VALVES, INTERNAL, LIQUIFIED PETROLEUM GAS AND ANHYDROUS AMMONIA, incorporating an excess flow valve, operated by ANY of the following means: (a) manually; (b) air actuation; OR (c) melting of a fusable link Op. 31.12.1997 Dec. 13.03.1998 - TC 9711382 DAMPERS, PULSATION, in line Op. 14.01.1998 Dec. 20.03.1998 VALVES, KEG SPEAR, with syphon tube Op. 02.02.1998 Dec. 17.04.1998 - TC 9800369 - TC 9800966

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90 8481.80.90

VALVES, FILLER, LIQUIFIED PETROLEUM GAS, manually operated, internal back check Op. 09.02.1998 Dec. 01.05.1998 - TC 9801191 VALVES, DRAIN, LIQUIFIED PETROLEUM GAS, manually operated, internal excess flow Op. 10.02.1998 Dec. 24.04.1998 - TC 9801232

8481.80.90

8481.80.90

COUPLINGS, VALVE, HYDRAULIC LINE, stainless steel OR brass, coupled pressure rating of 3 400 kPa OR greater, being EITHER of the following: (a) bodies, push connect, incorporating slide spring loaded sleeves; (b) stems, push connect Op. 12.02.1998 Dec. 24.04.1998 - TC 9801293 VALVES, PLUG, pressure rated to 13 500 kPa OR greater, temperature rated from -23 degrees C to 204 degrees C Op. 12.02.1998 Dec. 24.04.1998 - TC 9801294 VALVES, GLOBE, manually operated, having ALL of the following: (a) bore size NOT exceeding 50 mm; (b) bronze construction; (c) flow measure; (d) variable calibration pre-setting; (e) pre-selected flow rate at each setting

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Op. 12.02.1998 8481.80.90 Dec. 24.04.1998 - TC 9801300 VALVES, GLOBE, manually operated, having ALL of the following: (a) bore sizes of between 50 mm and 200 mm; (b) cast iron construction; (c) flow measure; (d) variable calibration pre-setting; (e) pre-selected flow rate at each setting Op. 12.02.1998 Dec. 24.04.1998 - TC 9801301 VALVES, KEG SPEAR COUPLING Op. 18.02.1998 Dec. 24.04.1998 - TC 9801485

8481.80.90 8481.80.90

PRESSURE REGULATORS, having ALL of the following: (a) port connections with OD thread sizes ranging from 3 mm to 51 mm (both inclusive); (b) incorporating a self bleed feature for relieving pressure downstream from the regulator; (c) airline pressure rating NOT exceeding 2 MPa Op. 19.02.1998 Dec. 01.05.1998 - TC 9801487 FILTERS, COMPRESSED AIRLINES, having ALL of the following: (a) regulator; (b) port connections with OD thread sizes ranging from 3 mm to 51 mm (both inclusive); (c) airline pressure rating NOT exceeding 2 MPa Op. 19.02.1998 Dec. 01.05.1998 - TC 9801492 VALVES, DIRECTIONAL CONTROL, sliding spool, hydraulic remote control, having interface mounting surfaces compatible with ANY of the following standards: (a) CETOP 5, RP35H, 7, 8; (b) NG4, 5 Op. 05.03.1998 Dec. 05.06.1998 - TC 9802009 VALVES, INVERSION, AIR BRAKE Op. 06.03.1998 Dec. 11.05.1998 - TC 9802013

8481.80.90

8481.80.90

8481.80.90 8481.80.90

VALVES, DIRECTIONAL CONTROL, piloted, pressure actuated, spring return, having BOTH of the following: (a) thread diameter of 3.175 mm to 12.7 mm (both inclusive); (b) operating pressure of 2 bar to 10 bar (both inclusive) Op. 12.03.1998 Dec. 22.05.1998 - TC 9802207 VALVES, CYLINDER, LPG, VAPOUR SERVICE, manual shut off, incorporating a relief valve Op. 13.03.1998 Dec. 22.05.1998 - TC 9802304 COUPLINGS, VALVE, steel, quick release by retracting the sleeve, with a minimum working pressure of 210 bar and self sealing valves on disconnect Op. 30.03.1998 Dec. 06.08.1998 - TC 9802722 VENTS, FLOAT, having ALL of the following: (a) brass construction; (b) plastic float shut-off; (c) maximum operating temperature of 120 degree C; (d) maximum operating pressure of 10 bar; (e) self operating Op. 02.04.1998 Dec. 19.06.1998 - TC 9802832 COUPLER VALVES (DISPENSING HEADS), HERMETICALLY SEALED CONTAINER,

8481.80.90

8481.80.90

8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


stainless steel Op. 20.04.1998 8481.80.90 Dec. 26.06.1998 - TC 9803278

CONNECTORS, SAFETY CHECK, LPG, 31.75 mm (1 1/4") ACME connection incorporating internal check valve Op. 30.04.1998 Dec. 17.07.1998 - TC 9803365 MULTI VALVE ASSEMBLIES, LPG, having a tank connection size of 19 mm OR greater, containing ANY three of the following: (a) fixed liquid level gauge; (b) male ACME fill valve; (c) male ACME vapour equalising valve complete with excess flow protection; (d) service valve consisting of a shut-off valve and female POL connection; (e) pressure relief valve; (f) plugged pressure gauge port Op. 30.04.1998 Dec. 17.07.1998 - TC 9803594 VALVES, MANIFOLD, stainless steel, block construction, pressure rating of 41 MPa at 38 degrees Celsius Op. 06.05.1998 Dec. 17.07.1998 - TC 9803798 VALVES, BUTTERFLY, having ALL of the following: (a) cast iron construction; (b) manual OR actuator operation; (c) bore size greater than 500 mm; (d) flange pressure rating to ANY of the following: (i) ANSI 125; (ii) ANSI 150; (e) speed controller Op. 07.05.1998 Dec. 17.07.1998 - TC 9803950 VALVES, PNEUMATIC CONTROL, AIR SUSPENSION BELLOW Op. 20.05.1998 Dec. 07.08.1998 - TC 9804304

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90

VALVES, BALL, NICKEL OR COBALT AUTOCLAVE DRAIN, 316 stainless steel, on-off Op. 21.05.1998 Dec. 31.07.1998 - TC 9804353 NOZZLES, LIQUID FUEL, having a built-in check valve and threaded inlets, with an external diameter of 20 mm, 25 mm OR 50 mm Op. 13.07.1998 Dec. 18.09.1998 - TC 9806089 VALVES, DRUM, stainless steel, being a dry disconnect valve with provision for drum suction tube, with OR without the tube Op. 13.07.1998 Dec. 18.09.1998 - TC 9806092 VALVES, COAXIAL TUBE ELEMENT, externally or direct solenoid activated Op. 20.07.1998 Dec. 02.10.1998 - TC 9806374 VALVES, PROPORTIONAL, hydraulic OR electronic control of spool position Op. 27.07.1998 Dec. 09.10.1998 - TC 9806646 AIRCRAFT REFUELLING EQUIPMENT, being ANY of the following: (a) adaptor, aircraft OR ground; (b) coupler, aircraft OR ground; (c) valve, hydrant pit; (d) nozzle, hose Op. 31.07.1998 Dec. 09.10.1998 - TC 9806800 COUPLINGS, VALVE, HYDRAULIC, steel, having retracting sleeve

8481.80.90

8481.80.90

8481.80.90

8481.80.90 8481.80.90

8481.80.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


quick release, in sizes greater than 25.4 mm with working pressures greater than 100 bar Op. 14.10.1998 Dec. 11.11.1998 - TC 9809932 8481.80.90 BALL VALVES, polyethylene OR polyvinylchloride, of a size NOT less than 2 in (5 cm) Op. 18.11.1998 Dec. 26.02.1999 - TC 9810154 VALVES, BALL, SEVERE SERVICE, slurry Op. 08.02.1999 Dec. 07.05.1999 - TC 9900983

8481.80.90 8481.80.90

VALVES, BUTTERFLY, double offset, having ALL of the following: (a) carbon steel body and disc; (b) bore size within the range 50 mm to 700 mm (both inclusive) (c) bidirectional sealing; (d) wafer OR lugged flange mounting; (e) rated to ANSI B 16.5 class 300 Op. 21.05.2001 Dec. 27.07.2001 - TC 0104253 VALVES, BLAST FURNACE, being ANY of the following: (a) hot blast valves; (b) waste OR mixed gas shut off valves; (c) cold blast shut off valves; (d) cold blast valves Op. 27.06.2001 Dec. 07.09.2001 - TC 0105142 GATE VALVES, BLAST FURNACE BACKDRAFT Op. 16.07.2001 Dec. 28.09.2001 SLIDING GATE MACHINES, STEEL LADLE Op. 15.02.2002 Dec. 10.05.2002 VALVES, GAS CYLINDER Op. 10.05.2002 Dec. 26.07.2002 - TC 0105821 - TC 0201393 - TC 0204015 - TC 0205188

8481.80.90

8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90 8481.80.90

CHRISTMAS TREES, HORIZONTAL, SUBSEA WELL Op. 18.06.2002 Dec. 06.09.2002

METERING VALVE ASSEMBLIES, AEROSOL, 11 - 14 mg OR 23 - 28 mg Op. 15.08.2002 Dec. 01.11.2002 - TC 0207427 VALVES, AEROSOL, having a laminated bag attached Op. 15.08.2002 Dec. 01.11.2002 - TC 0207428

VALVES, GLOBE, complying with BOTH of the following: (a) manufactured in accordance with ANY of the following standards: (i) BS 1560; (ii) BS 1873; (iii) BS 5152; (iv) BS 5154; (v) BS 5352; (vi) ANSI B16.34; (vii) API 597; (viii) API 598; (ix) API 6D; (x) API 600; (xi) API 602; (b) pressure rated to ANY of the following: (i) ANSI 150; (ii) ANSI 300; (iii) ANSI 600; (iv) ANSI 800; (v) ANSI 900;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(vi) ANSI 1500; (vii) ANSI 2500; (viii) ANSI 4500 Op. 14.07.2003 Dec. 03.10.2003 8481.80.90

- TC 0308601

VALVES, BALL, full bore, trunnion mounted, to API 6D, having ALL of the following: (a) pressure rating to ANSI 1 500; (b) flanged end connections to ASME B 16.5 or ASME B 16.34; (c) manual gearbox actuator; (d) bore greater than 500 mm Op. 03.02.2004 Dec. 23.04.2004 - TC 0401376 CHRISTMAS TREES, OPEN WATER COMPLETION, SUB-SEA WELL, OIL AND GAS Op. 31.05.2004 Dec. 27.08.2004 - TC 0405194 VALVES, BUTTERFLY, BLAST FURNACE BLEEDER BURNER, having a diameter greater than 50 cm Op. 07.02.2005 Dec. 18.04.2005 - TC 0501478 CORES, tyre valve Op. 15.06.1988 Dec. 12.08.1988 - TC 8805712

8481.80.90 8481.80.90 8481.90

8481.90.90
8481.90.90

PARTS, PRESSURE REDUCING VALVE, being copper alloy valve bodies Op. 13.02.2013 Dec. 22.04.2013 - TC 1305545
PARTS, PRESSURE REGULATOR, aluminium, being ANY of the following: (a) top castings; (b) end cap castings; (c) body castings Op. 22.05.2012 Dec. 13.08.2012 - TC 1217176 PARTS, EQUALISING AND RELIEF VALVE, being valve lid shafts AND/OR valve lid carrying arms Op. 20.04.2012 Dec. 09.07.2012 - TC 1212954 PARTS, REFRIGERATION AND AIR CONDITIONING VALVE, being ANY of the following: (a) pistons; (b) drain plugs; (c) fixed OR vented caps, with OR without gaskets; (d) seats; (e) insert bushes; (f) armatures, with OR without ANY of the following: (i) nuts; (ii) gaskets; (iii) O rings, (g) top AND/OR bottom covers; (h) piston rings; (i) pushrods; (j) valve cartridges; (k) hand wheels; (l) valve orifices, with OR without EITHER of the following: (i) gaskets; (ii) O rings, (m) inlet AND/OR outlet connections; (n) plates; (o) spindles; (p) valve housings; (q) inlet AND outlet plugs; (r) armature tubes, with OR without gaskets; (s) weld nipples Op. 04.04.2012 Dec. 02.07.2012 - TC 1211258

8481.90.90

8481.90.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.90.90 PARTS, BLAST FURNACE SHUT OFF VALVE, being ANY of the following: (a) keys; (b) levers; (c) brackets; (d) shafts Op. 17.02.2012 Dec. 30.04.2012 - TC 1205540 PARTS, CHOKE VALVE, being ANY of the following: (a) seal kits, including ALL of the following: (i) seal body; (ii) seal bonnet; (iii) retaining ring; (iv) flow rings; (v) thrust bearings; (vi) thrust washers; (vii) dowel pins, (b) stem assemblies, including ALL of the following: (i) threaded bottom stem; (ii) screw pin; (iii) top wear stem, (c) flow rings; (d) retaining sleeves; (e) collars; (f) bonnets; (g) interface plates; (h) calibration head assemblies, including ALL of the following: (i) base seal; (ii) grub screw; (iii) grease nipple, (i) seat assemblies, including BOTH of the following: (i) seat outer rings; (ii) seat inner rings Op. 14.02.2012 Dec. 07.05.2012 - TC 1204884 SETS, VALVE PARTS, DUST DISCHARGE VALVE, BLAST FURNACE, consisting of ALL of the following: (a) swivel roller bearings; (b) bushes; (c) felt rings; (d) O-rings; (e) gaskets; (f) distance rings; (g) metering valves (valve paddles) Op. 03.02.2012 Dec. 30.04.2012 - TC 1203848 REPAIRED PARTS, BLAST FURNACE VALVE, being valve bodies For the purposes of this Order, these goods had been sent out of Australia for repair prior to importation Op. 14.09.2011 Dec. 12.12.2011 - TC 1131325 HOUSINGS, PIPELINE CLEANING OR INSPECTION MACHINE, steel Op. 15.09.2011 Dec. 05.12.2011 - TC 1131441 PARTS, CUT OFF VALVE, being pawls Op. 02.09.2011 Dec. 28.11.2011 - TC 1129981

8481.90.90

8481.90.90

8481.90.90

8481.90.90 8481.90.90 8481.90.90

PARTS, VALVE, DOUBLE ACTING PISTON DIAPHRAGM PUMP, being ANY of the following: (a) cones; (b) seats; (c) plates; (d) retaining rings Op. 03.03.2011 Dec. 18.07.2011 - TC 1108056

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.90.90 PARTS, GATE VALVE, MATERIAL CHARGER, BLAST FURNACE, being ANY of the following: (a) material gates; (b) wear liners; (c) bushes Op. 15.04.2011 Dec. 11.07.2011 - TC 1112633 SETS, VALVE PARTS, DUST DISCHARGE VALVE, BLAST FURNACE, consisting of ALL of the following: (a) swivel roller bearings; (b) bushes; (c) felt rings; (d) o-rings; (e) gaskets; (f) distance rings; (g) metering valves AND/OR valve paddles; (h) casing covers; (i) clamping rings; (j) U seals Op. 14.04.2011 Dec. 11.07.2011 - TC 1112568 PARTS, TEMPERING AND/OR MIXING VALVE, being copper alloy valve bodies, whether or not chrome plated Op. 28.01.2011 Dec. 18.04.2011 - TC 1104148 PARTS, THERMOSTATIC MIXING VALVE, being ANY of the following: (a) stainless steel limiting rings; (b) plastic hot seat overmoulds; (c) plastic dielectric rings Op. 05.01.2011 Dec. 28.03.2011 - TC 1100407 PARTS, THERMOSTATIC MIXING VALVE, plastic, being ANY of the following: (a) lower cartridges; (b) upper cartridges; (c) spindle plungers; (d) piston overmoulds Op. 30.08.2010 Dec. 22.11.2010 - TC 1039910 PARTS, JUMPER VALVE, being brass retaining plates Op. 14.01.2010 Dec. 09.04.2010 - TC 1002790

8481.90.90

8481.90.90

8481.90.90

8481.90.90

8481.90.90 8481.90.90

PARTS, NON-RETURN AND PRESSURE RELIEF VALVE, being copper alloy valve bodies Op. 24.07.2009 Dec. 02.10.2009 - TC 0926550 PARTS, TEMPERING VALVE, being brass valve bodies, whether or not chrome plated Op. 21.07.2009 Dec. 02.10.2009 - TC 0925824 PARTS, THERMOSYPHON ARRESTER VALVE, being cast copper alloy bodies Op. 16.07.2009 Dec. 02.10.2009 - TC 0925286 PARTS, PRESSURE LIMITING VALVE, being cast copper alloy bodies Op. 25.03.2009 Dec. 05.06.2009 - TC 0909936 PARTS, VALVE, BLOWOUT PREVENTER, being ANY of the following: (a) bodies; (b) tops; (c) pistons; (d) inner cylinder heads; (e) outer cylinder heads;

8481.90.90

8481.90.90

8481.90.90 8481.90.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(f) pusher plates; (g) lock rings; (h) actuator rings; (i) outer cylinder lock segments; (j) lock segment retaining rings; (k) support plates; (l) lock ring access port plugs; (m) hydraulic port plugs; (n) lifting eyes Op. 27.01.2010 Dec. 09.04.2010 8481.90.90

- TC 1004770

PARTS, HOT BLAST VALVE, BLAST FURNACE, being spindle and nut assembly Op. 28.04.2005 Dec. 16.09.2005 - TC 0504835 VALVE BLOCKS OR VALVE MANIFOLDS, SCARFER Op. 12.10.2005 Dec. 03.01.2006 - TC 0513660

8481.90.90 8481.90.90

PARTS, HOT BLAST VALVE, being EITHER of the following: (a) valve paddles; (b) cooling water stems Op. 08.11.2005 Dec. 23.01.2006 - TC 0515681 PARTS, BLAST FURNACE GOGGLE VALVE, being ANY of the following; (a) hydraulic rams; (b) plate seal rings; (c) rolls or rollers Op. 29.11.2005 Dec. 13.02.2006 - TC 0516883 BODIES, VALVE, HOT BLAST Op. 01.05.2006 HOUSINGS, THROTTLE BODY Op. 28.08.2006 Dec. 21.07.2006 Dec. 24.11.2006 - TC 0607588 - TC 0616186

8481.90.90

8481.90.90 8481.90.90 8481.90.90

PARTS, VALVE, TURBINE, being ANY of the following: (a) spindles; (b) segments; (c) pistons; (d) gland packing; (e) rings; (f) stuffing boxes; (g) guide bushes; (h) couplings Op. 04.01.2007 Dec. 23.03.2007 - TC 0700286 PARTS, ISOLATION GATE VALVE, DUST DISCHARGER, BLAST FURNACE, being ANY of the following: (a) position resolvers; (b) connectors; (c) limit switches; (d) couplings; (e) bushes; (f) seals; (g) cylinders Op. 29.03.2007 Dec. 15.06.2007 - TC 0705109 PARTS, HOT BLAST VALVE, BLAST FURNACE, being ANY of the following: (a) bonnets; (b) paddles; (c) guide rollers; (d) roll holders; (e) cooling ring and/or cover plate refractory fixings;

8481.90.90

8481.90.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(f) lining moulds; (g) crossheads; (h) cooling water pipe packings; (i) shaped sleeves; (j) disengaging levers; (k) universal joints; (l) flange sealings; (m) head flanges; (n) cooling water pipes; (o) valve bodies; (p) anchors; (q) beams; (r) plates; (s) expansion joints; (t) valve seats; (u) roller guards; (v) limit switch fastenings; (w) gearing brackets; (x) split ring packings; (y) valve discs Op. 01.05.2007 Dec. 20.07.2007 8481.90.90

- TC 0706221

PARTS, VALVE, BLAST FURNACE, being ANY of the following: (a) notched pins; (b) rings; (c) plates; (d) shaft seal rings; (e) pipes; (f) stuffing boxes; (g) covers; (h) levers; (i) bearing blocks; (j) discs; (k) valves bodies Op. 02.07.2007 Dec. 07.09.2007 - TC 0708686 PARTS, VALVE, BLAST FURNACE, being ANY of the following: (a) seals; (b) joints; (c) covers; (d) retaining rings; (e) mechanical limiters; (f) suspension eyes Op. 24.10.2007 Dec. 30.01.2008 - TC 0718127 PARTS, TEMPERATURE AND PRESSURE RELIEF VALVE, cast gunmetal body Op. 27.08.2008 Dec. 21.11.2008 - TC 0828209 PARTS, VALVES, STEAM, PARALLEL SLIDE OR CHECK, being ANY of the following: (a) discs; (b) stems; (c) eyes; (d) bonnets; (e) bodies Op. 03.09.2008 Dec. 28.11.2008 - TC 0829304 ADAPTERS, tyre valve Op. 02.06.1993 Dec. 03.09.1993 - TC 9305146 - TC 9308205

8481.90.90

8481.90.90

8481.90.90

8481.90.90 8481.90.90

EXTENSIONS, AUTOMOTIVE TYRE VALVE Op. 08.02.1993 Dec. 14.05.1993

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8481.90.90 8481.90.90 CAPS, AUTOMOTIVE TYRE VALVE Op. 08.02.1993 Dec. 14.05.1993 - TC 9308222

PISTON AND SOLENOID ASSEMBLY, being a component part of an automotive LPG, automatic shut off valve, comprising ALL of the following: (a) solenoid; (b) piston; (c) spring; (d) piston housing Op. 31.05.1994 Dec. 14.09.1994 - TC 9404956 PARTS, VALVES, GLOBE, stainless steel, forged, having ALL of the following: (a) capable of operating within the temperature range of -196 degrees C to 816 degrees C; (b) manufactured in accordance with one of the following standards: (i) ASME/ANSI B1.20.1; (ii) ASME/ANSI B16.10; (iii) ASME/ANSI B16.34; (iv) API 597; (v) API 598; (vi) API 602; (vii) BS 1873; (c) having a pressure rating of one of the following classes: (i) ASME/ANSI 150; (ii) ASME/ANSI 300; (iii) ASME/ANSI 600; (iv) ASME/ANSI 900; (v) ASME/ANSI 1500; (vi) ASME/ANSI 2500; (vii) ASME/ANSI 4500 Op. 12.10.1994 Dec. 31.01.1995 - TC 9408139

8481.90.90

8481.90.90

PARTS, VALVES, being EITHER of the following: (a) core housings with a valve core thread diameter NOT less than VG.8, and an external thread size of 12.70 mm (32 UNF); (b) valve spuds having an internal thread size of 12.70 mm (20 UNF-2A or 32 UNF) Op. 30.03.1995 Dec. 15.09.1995 - TC 9504660 PARTS AND ACCESSORIES, POSITIONERS, VALVE, PNEUMATIC OR ELECTROPNEUMATIC, being ANY of the following: (a) cover; (b) frame; (c) restriction plug; (d) bearing support; (e) spindle; (f) arm; (g) cam; (h) indicator; (i) shaft; (j) coil; (k) body; (l) terminal block; (m) diaphragm; (n) retainer; (o) spool; (p) ball; (q) valve body; (r) middle section;

8481.90.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(s) balance weight; (t) beam; (u) main support; (v) nozzle; (w) polarity mark; (x) housing; (y) bellow; (z) intermediate piece; (aa) flow inverter; (ab) connecting block; (ac) rod; (ad) indicator arrow; (ae) twist stop; (af) pilot valve; (ag) mounting adaptor; (ah) plug; (ai) spindle adaptor; (aj) mounting kit Op. 15.07.1997 Dec. 03.10.1997 8481.90.90

- TC 9706323

PARTS, ABRASIVE METERING VALVE, being ANY of the following: (a) knobs; (b) caps; (c) rings, bump; (d) seals, piston OR plunger; (e) pistons; (f) plungers, tungsten carbide; (g) cylinders; (h) sleeves, urethane OR tungsten carbide; (i) bases; (j) nipples, pipe; (k) inserts; (l) seats Op. 04.12.1997 Dec. 27.02.1998 - TC 9710668

8481.90.90

PARTS, VALVES, DIRECTIONAL CONTROL, fluid power hydraulic, being ANY of the following: (a) pistons; (b) valve cones; (c) valve seats; (d) base rings; (e) support rings; (f) scrappers; (g) cartridges; (h) throttles; (i) membranes; (j) rings; (k) guide bushings; (l) indicator glasses; (m) throttle discs; (n) valve sets, comprising plunger and seals; (o) inserts; (p) sleeves; (q) flow control assemblies, comprising integral needle valve and orifice; (r) plungers; (s) bodies; (t) seals; (u) locknuts; (v) protective covers; (w) spring housings; (x) retainer plates;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(y) discs; (z) spools; (aa) spool assemblies, comprising spool and seals; (ab) spindle assemblies, comprising spindle and seals; (ac) elements; (ad) lifting rams; (ae) spring plates; (af) valve guides; (ag) piston head plates Op. 10.12.1997 Dec. 06.03.1998 - TC 9710913 8481.90.90 PARTS, MULTI-PLATE COMPRESSOR VALVE, being ANY of the following: (a) plates; (b) seats; (c) guards; (d) rings; (e) channels and springs; (f) bushes; (g) suction valve unloaders; (h) finger unloaders; (i) guide bushes; (j) unloader covers Op. 17.12.1997 Dec. 11.03.1998 - TC 9711159 PARTS, FLOW CONTROL BALANCING VALVES, being ANY of the following: (a) stainless steel 80 mm cartridges, with variable ported cup and stainless steel spring with ANY of the following control ranges: (i) 9-138 kPa; (ii) 14-220 kPa; (iii) 35-220 kPa; (iv) 27-393 kPa; (v) 55-880 kPa; (b) valve bodies 50 mm to 800 mm, being of either grey iron OR ductile iron Op. 05.02.1998 Dec. 17.04.1998 - TC 9801321 PARTS, EXPANSION VALVE, being ANY of the following: (a) pistons, brass, teflon OR neoprene seat, being ONE of the following: (i) solid; (ii) tapered orifice; (iii) parallel orifice; and having EITHER three external fins or five external flutes; (b) bodies, brass; (c) sweat assembly, being piston retainer and tube, whether OR NOT including strainer and/or nut; (d) retainers, piston; (e) flare tails, brass Op. 01.05.1998 Dec. 17.07.1998 - TC 9803670 REPAIR KITS, DRILL PIPE FLOAT VALVE, as follows: (a) kit comprising ALL of the following: (i) valves; (ii) valve seal disks; (iii) valve guides; (iv) springs; OR (b) kit comprising ALL of the following: (i) flapper valves; (ii) seal retaining rings; (iii) hinge pins; (iv) springs

8481.90.90

8481.90.90

8481.90.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Op. 20.11.1998 8481.90.90 8481.90.90 Dec. 05.02.1999 - TC 9810221

CARTRIDGES, CERAMIC DISC, SINGLE LEVER MIXER TAP Op. 09.07.1999 Dec. 24.09.1999

- TC 9905135

PARTS, BLAST FURNACE VALVE, being ANY of the following: (a) valve gate seals; (b) seats; (c) bodies; (d) bonnets; (e) paddles; (f) insulation linings OR coverings; (g) seat rings Op. 27.06.2001 Dec. 07.09.2001 - TC 0105144 PARTS, FLOW CONTROL BALANCING VALVES, being ANY of the following: (a) stainless steel cartridges, 15 mm to 80 mm diameter, with variable ported cup, stainless steel spring, rubber o-ring, with or without retaining ring; (b) valve bodies, DN 15 mm to 800 mm; (c) union connection ends, DN 15 mm to 65 mm Op. 14.01.2002 Dec. 25.03.2002 - TC 0200345 PARTS AND ACCESSORIES, GAS CYLINDER VALVES, being ANY of the following: (a) adaptor blocks; (b) bursting disc housings; (c) extender tubes; (d) handwheels; (e) regulator cassettes; (f) residual pressure valves; (g) seats; (h) spindles; (i) stems; (j) valve bodies; (k) valve connectors Op. 15.08.2002 Dec. 01.11.2002 - TC 0207420 DISCS, CHECK VALVE Op. 14.07.2003 Dec. 03.10.2003 - TC 0308599

8481.90.90

8481.90.90

8481.90.90 8481.90.90

PARTS, GATE OR GLOBE VALVE, being EITHER of the following: (a) stems; (b) discs Op. 14.07.2003 Dec. 03.10.2003 - TC 0308600 BEARINGS, ball, precision ground, self aligning Op. 10.07.1990 Dec. 15.10.1990 - TC 9002852

8482.10 8482.10

BEARINGS, linear motion, precision ground track and bearing with recirculating precision ground balls Op. 03.10.1992 Dec. 15.10.1992 - TC 9208075 BALL BEARINGS, WHEEL, PASSENGER MOTOR VEHICLE, with OR without ANY of the following: (a) circlips; (b) seal caps; (c) split pins; (d) nut Op. 30.09.2010 Dec. 20.12.2010 - TC 1044573 WHEEL BEARINGS, PASSENGER MOTOR VEHICLE Op. 25.06.2010 Dec. 06.10.2010 - TC 1028497

8482.10.10

8482.10.10

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8482.10.10 8482.10.10 BEARINGS, THRUST, BALL Op. 17.06.1997 Dec. 29.08.1997 - TC 9705160

BEARINGS, BALL, precision ground, but NOT including any precision ground ball bearing having ANY of the bore and corresponding outer diameter dimensions listed in the TABLE: THE TABLE Bore (+ or - 0.025 mm) Outer Diameter ( + or - 0.025 mm) 30.000 mm 58.000 mm 30.000 mm 63.000 mm 35.000 mm 65.000 mm 38.000 mm 63.000 mm 42.000 mm 62.000 mm 45.000 mm 80.000 mm Op. 17.06.1997 Dec. 29.08.1997 - TC 9705319 BALL BEARINGS, ground Op. 16.12.2010 Dec. 16.03.2011 - TC 1054837

8482.10.90 8482.10.90

BEARINGS, ball, precision ground, but NOT including ANY precision ground ball bearing having ANY of the bore and corresponding outer diameter dimensions listed in the following TABLE: THE TABLE Bore (+ or - 0.025 mm) Outer Diameter (+ or - 0.025 mm) 30 30 35 38 42 45 Op. 25.09.1996 mm mm mm mm mm mm Dec. 09.12.1996 Dec. 09.05.1997 58 63 65 63 62 80 mm mm mm mm mm mm - TC 9611036 - TC 9701557

8482.10.90 8482.99.10

BEARINGS, THRUST, BALL Op. 21.02.1997

PARTS, TAPERED ROLLER BEARING, being EITHER of the following: (a) cups, being the outer ring; (b) cone assemblies, consisting of ALL of the following: (i) inner rings; (ii) cage; (iii) rollers Op. 25.10.2010 Dec. 10.01.2011 - TC 1047613 BEARINGS, tapered roller, double row or greater, comprised of multiple row cups or multiple row cones, but NOT including double cups with OD and width dimensions which correspond to THE TABLE below THE TABLE Cup OD (mm) Width (mm) 63.015 42.000 76.000 35.000 Op. 04.06.1990 Dec. 26.09.1990 - TC 9001767 BEARINGS, TAPERED ROLLER Op. 15.06.2010 Dec. 06.09.2010 - TC 1026590 BEARINGS, TAPERED ROLLER, including tapered roller bearing cone assemblies, but NOT including cone assemblies or bearings that include cone assemblies with bore dimensions (+ or - 0.025 mm) and corresponding cone width dimensions (+ or - 0.025 mm) as listed in the following TABLE: THE TABLE

8482.20

8482.20.10 8482.20.10

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Bore (mm) 17.462 19.050 21.430 21.430 21.986 25.400 26.998 29.000 29.985 30.000 30.162 31.750 31.750 31.750 34.925 34.925 34.925 34.988 35.000 38.000 38.100 41.275 42.000 44.450 45.000 45.242 46.000 50.000 57.150 57.150 61.912 63.500 66.675 66.675 68.262 76.200 79.985 80.962 82.550 82.550 82.550 88.900 90.000 92.075 92.075 95.250 Op. 17.06.1997 8482.20.90 Cone Width (mm) 14.605 16.637 16.637 18.288 16.637 14.732 14.732 14.732 21.000 19.500 21.433 16.764 19.050 20.638 18.288 28.575 25.400 16.764 20.600 17.000 18.288 19.812 19.000 30.302 26.000 19.812 18.000 21.501 21.946 36.678 46.038 38.354 30.162 38.354 46.038 54.229 29.769 29.769 33.338 36.098 41.275 39.688 40.000 36.322 34.925 36.322 Dec. 29.08.1997 - TC 9705320

BEARINGS, tapered roller, including tapered roller bearing cone assemblies, but NOT including cone assemblies or bearings that include cone assemblies with bore dimensions (+ OR - 0.025 mm) and corresponding cone width dimensions (+ OR - 0.025 mm) as listed in the following TABLE: THE TABLE Cone Bore (mm) Cone Width (mm) 17.462 14.605 19.050 16.637 21.430 18.288 21.986 16.637 25.400 14.732 26.998 14.732 28.575 21.433 29.000 14.732

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


29.985 30.000 30.162 31.750 31.750 31.750 34.925 34.925 34.925 34.988 35.000 38.000 38.000 38.100 40.000 40.000 41.275 42.000 45.000 45.242 50.000 50.000 63.500 66.675 82.550 88.900 90.000 92.075 95.250 Op. 20.09.1996 8482.20.90 21.000 19.500 21.433 16.764 19.050 20.638 18.288 25.400 28.575 16.764 20.600 17.000 19.000 18.288 24.700 20.000 19.812 19.000 26.000 19.812 20.000 21.501 38.354 38.354 36.098 39.688 40.000 36.322 36.322 Dec. 22.11.1996 - TC 9610908

BEARINGS, being EITHER of the following: (a) tapered roller; (b) tapered roller bearing cone assemblies, comprising ALL of the following: (i) cone; (ii) cage; (iii) tapered rollers Op. 09.07.1999 Dec. 17.09.1999 - TC 9905133 BEARINGS, roller, spherical Op. 29.05.1985 Dec. 18.07.1985 - TC 8531690

8482.30 8482.40

BEARINGS, needle roller, but NOT including ANY of the following: (a) cage and roller assemblies having a bore size of 9.525 mm or greater but NOT exceeding 44.450 mm; (b) drawn cup bearings having a bore size of 9.525 mm or greater but NOT exceeding 44.450 mm; (c) parts for bearings; (d) thrust bearings Op. 09.03.1988 Dec. 13.07.1988 - TC 8805977 BEARINGS, NEEDLE ROLLER Op. 02.02.2001 Dec. 23.04.2001 - TC 0101092 - TC 8531570 - TC 8732592 - TC 8802503

8482.40.90 8482.50 8482.50 8482.50 8482.80

BEARINGS, roller, cylindrical Op. 29.05.1985 Dec. 18.07.1985 BEARINGS, linear motion, recirculating roller Op. 01.01.1988 Dec. 01.01.1988 BEARINGS, thrust, cylindrical roller Op. 09.03.1988 Dec. 10.03.1988 RINGS, slewing, ungeared

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Op. 10.04.1984 8482.80 Dec. 10.04.1984 - TC 8437896

BEARINGS, (but NOT including thrust bearings) having BOTH of the following: (a) an inner race bore ID either: (i) NOT exceeding 17 mm; (ii) exceeding 96 mm; (b) an outer race OD either: (i) NOT exceeding 39 mm; (ii) exceeding 169 mm Op. 08.03.1988 Dec. 27.04.1988 - TC 8802486 KITS, BEARING, comprised SOLELY of bearings to which, if imported separately, Item 50 in Schedule 4 to the Customs Tariff Act 1987 would apply Op. 05.12.1988 Dec. 01.08.1989 - TC 8810226 BEARINGS, combined radial-axial, having ANY of the following bore sizes: (a) less than 29.90 mm; (b) greater than 30.10 mm but less than 34.90 mm; (c) greater than 35.10 mm but less than 44.90 mm; (d) greater than 45.10 mm Op. 20.03.1991 Dec. 16.09.1991 - TC 9102657 KITS, OVERHAUL OR REBUILD, TRANSMISSION, comprising ALL of the following: (a) bearings; (b) oil seals; (c) snap rings; (d) gaskets Op. 05.08.2005 Dec. 21.11.2005 - TC 0516021 REPAIR KITS, DIESEL ENGINE BLOWER having a free air delivery of more than 25 cubic metres/minute, consisting of ALL of the following: (a) cylindrical roller bearings; (b) ball bearings; (c) lockwasher; (d) seals; (e) spacers; (f) shims Op. 23.12.1993 Dec. 15.04.1994 - TC 9401061 BALLS, metal Op. 15.07.1985 Dec. 04.12.1985 - TC 8533402

8482.80

8482.80

8482.80.00

8482.80.00

8482.91 8482.91 8482.91.90 8482.99

BALLS, bearing, plastic, having a dia less than 6 mm Op. 20.04.1988 Dec. 15.12.1988 - TC 8803849 ROLLERS, tapered roller bearing Op. 17.01.1997 Dec. 24.03.1997 - TC 9700524

8482.99

PARTS, needle roller thrust bearing, being EITHER of the following: (a) inner retainers; (b) outer retainers Op. 09.03.1988 Dec. 10.03.1988 - TC 8802453 PARTS, needle roller-bearing, being EITHER of the following: (a) cages, but NOT including cages fitted with rollers; (b) cups Op. 09.03.1988 Dec. 10.03.1988 - TC 8802454 RACES OR RINGS, inner or outer, needle roller-bearing

8482.99

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Op. 30.09.1988 8482.99.90 8482.99.90 8482.99.90 ADAPTERS, BEARING Op. 22.12.2010 Dec. 29.06.1989 - TC 8808689

Dec. 16.03.2011

- TC 1055724 - TC 0713145

PARTS, ROLLER BEARING, being thrust pads Op. 17.08.2007 Dec. 19.10.2007

PARTS, TAPERED ROLLER BEARING, being ANY of the following: (a) cages; (b) cone spacers; (c) cup spacers; (d) cones, unground, having a cone bore greater than 95 mm; (e) cups, unground, having a cup OD greater than 120 mm; (f) rings, rib Op. 17.01.1997 Dec. 24.03.1997 - TC 9700525 BEARINGS, ECCENTRIC, having ALL of the following: (a) rollers; (b) cage; (c) inner ring Op. 10.12.1997 Dec. 27.02.1998

8482.99.90

- TC 9710835

8482.99.90

PARTS, BEARINGS, linear motion, precision ground track and bearing with recirculating precision ground balls being ANY of the following: (a) guide rails; (b) runner blocks; (c) mounting plugs; (d) guide blocks Op. 05.01.1998 Dec. 20.03.1998 - TC 9800025 CUPS, TAPERED ROLLER BEARING Op. 09.07.1999 Dec. 17.09.1999 - TC 9905134

8482.99.90

8483.50.11

TENSIONERS AND/OR PULLEYS, BELT, whether or not incorporating bearings Op. 15.06.2010 Dec. 06.09.2010 - TC 1026592 ACCESSORY DRIVES, DIESEL ENGINE, including pulley Op. 04.02.2011 Dec. 23.05.2011 FLYWHEELS, dual mass Op. 19.03.2010 - TC 1105086

8483.50.19

8483.50.19 8483.10

Dec. 04.06.2010

- TC 1013710 units and either 8530795

TRAVERSING UNITS, linear motion, friction driven, being which comprise groups of bearings alternately inclined radially spring loaded to a shaft to generate drive in or both axial directions Op. 08.02.1985 Dec. 13.02.1986 - TC

8483.10

PARTS FOR COMPRESSORS having a capacity exceeding 25 cu m/min of free air delivered, being ANY of the following: (a) camshafts; (b) cranks; (c) crankshafts Op. 24.10.1985 Dec. 24.10.1985 - TC 8534657 PROPELLER SHAFT ASSEMBLIES, universal joint type, having a minimum torsional strength capacity exceeding 15 000 N m

8483.10

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


elastic limit Op. 19.12.1986 8483.10 8483.10.91 Dec. 19.12.1986 - TC 8636198

SHAFTS, 4 cycle reciprocating piston, one or two cylinder petrol engine Op. 09.04.1988 Dec. 27.10.1989 - TC 8803198 PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years before the goods are entered for home consumption, or reproductions of these parts, being ANY of the following: (a) crank shafts; (b) cam shafts Op. 10.04.1997 Dec. 20.06.1997 - TC 9702626 SHAFTS, DIESEL ENGINE Op. 17.06.1997 Dec. 29.08.1997 - TC 9705115 - TC 1138791

8483.10.91 8483.10.99 8483.10.99

PARTS, ANODE PASTE KNEADING MACHINE, being shafts Op. 21.11.2011 Dec. 06.02.2012

STUB AXLES, GAS TURBINE AND/OR COMPRESSOR, with spline OR coupling ends Op. 15.11.2010 Dec. 07.02.2011 - TC 1050286 PARTS, EARTHMOVER, being ANY of the following: (a) oil motor shafts; (b) piston pump shafts; (c) engine hydraulic drive pump shafts Op. 22.10.2010 Dec. 10.01.2011 TRANSMISSION SHAFTS, GRINDING ROLL Op. 19.10.2010 Dec. 10.01.2011 SPINDLES, HOT STRIP ROLLING MILL Op. 12.10.2010 Dec. 07.01.2011

8483.10.99

- TC 1047398 - TC 1046809 - TC 1045904

8483.10.99 8483.10.99 8483.10.99

PARTS, DIESEL ENGINE FUEL INJECTION PUMP, being EITHER of the following: (a) camshafts; (b) drive shafts Op. 26.03.2010 Dec. 18.06.2010 - TC 1014877 DOUBLE UNIVERSAL JOINT AND SHAFT ASSEMBLIES, consisting of BOTH of the following: (a) cardan shafts; (b) universal joints Op. 19.01.2010 Dec. 07.04.2010 - TC 1003602 UNIVERSAL JOINT SHAFTS Op. 16.12.2009 Dec. 05.03.2010 - TC 0949036

8483.10.99

8483.10.99 8483.10.99 8483.10.99 8483.10.99

PARTS, HORIZONTAL STIRRED GRINDING MILL, being drive shafts Op. 07.09.2009 Dec. 27.11.2009 - TC 0933064 PARTS, WIND-TURBINE POWERED GENERATOR, being drive shafts Op. 08.09.2005 Dec. 09.01.2006 - TC 0511961 PARTS, WALKING BEAM FURNACE, being EITHER of the following: (a) drive shaft extensions; (b) pinions Op. 25.11.2005 Dec. 13.02.2006 - TC 0516646 DRIVE SHAFTS, COOLING TOWER FAN, COKE OVEN Op. 17.11.2008 Dec. 30.01.2009 - TC 0840067

8483.10.99

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.10.99 8483.10.99 DRIVE SHAFTS AND IMPELLER SHAFTS, WATERSCOOTER Op. 01.07.1993 Dec. 06.09.1993 - TC 9311794

SHAFTS, SEWER, FLEXIBLE, having BOTH of the following: (a) 22 mm or 32 mm diameter; (b) 4 572 mm sectional length Op. 14.04.1995 Dec. 29.09.1995 - TC 9504953 PARTS, POWERHEADS, being ANY of the following: (a) crankshafts; (b) connecting rods Op. 02.06.1995 Dec. 15.09.1995 SHAFTS, diesel engine Op. 05.12.1996 Dec. 28.02.1997

8483.10.99

- TC 9505914 - TC 9612797

8483.10.99 8483.10.99

CRANKSHAFTS, OPEN DRIVE REFRIGERATION OR AIR CONDITIONING COMPRESSOR Op. 18.05.1998 Dec. 24.07.1998 - TC 9804216 DRIVE SHAFT BEARING ASSEMBLIES, comprising ALL of the following: (a) bent housing; (b) radial bearings; (c) thrust bearings; (d) flexible shaft Op. 28.06.2004 Dec. 10.09.2004 - TC 0406382 BEARINGS, disc harrow Op. 06.12.1983 Dec. 06.12.1983 - TC 8342088

8483.10.99

8483.20 8483.20

BEARING CARTRIDGES, sealed ball, comprising a cylindrical bored inner race and an outer race EITHER part spherical on OD or cylindrical OD for resilient mounting in housings, such that the whole assembly provides self-centring and/or shock absorbing characteristics Op. 06.12.1983 Dec. 06.12.1983 - TC 8342091 BEARINGS, linear motion, precision ground track and bearing with recirculating precision ground balls Op. 03.10.1992 Dec. 15.10.1992 - TC 9208076 SPLIT CYLINDRICAL ROLLER BEARINGS, COLD STEEL ROLLING MILL ELECTRIC DRIVE MOTOR, having pedestal housings Op. 19.09.2012 Dec. 10.12.2012 - TC 1235864 SPLIT CYLINDRICAL ROLLER BEARINGS, COLD STEEL ROLLING MILL ELECTRIC DRIVE MOTOR, having pedestal housings Op. 19.09.2012 Dec. 10.12.2012 - TC 1235864 BEARINGS AND BEARING HOUSINGS, ROLL SUPPORT, CONTINUOUS PAINT LINE Op. 08.03.2006 Dec. 26.05.2006 - TC 0604915 BEARINGS, turbocharger Op. 06.12.1983 Dec. 06.12.1983 - TC 8342117

8483.20

8483.20.00

8483.20.00

8483.20.00

8483.30 8483.30 8483.30

BEARINGS, wooden, oil-less Op. 06.12.1983 Dec. 06.12.1983 - TC 8342118 BEARINGS FOR TURBOCHARGERS, being sets consisting of the goods specified in TABLE A and ANY of the goods specified in TABLE B TABLE A bearings TABLE B (a) bolts; (f) seals;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(b) circlips; (c) clamps; (d) lock plates; (e) rings; Op. 11.06.1985 8483.30 8483.30 BEARINGS, pivot shoe type Op. 16.10.1987 (g) shaft nuts; (h) thrust bearings; (i) washers Dec. 05.09.1985 Dec. 15.12.1987 - TC 8532384 - TC 8735032

BEARINGS, engine, having an ID NOT less than 305 mm Op. 04.08.1988 Dec. 22.06.1989 - TC 8806985

8483.30.90 8483.30.90

HYDROSTATIC PLAIN SHAFT BEARINGS, HYDRO-ELECTRIC TURBINE Op. 29.04.2013 Dec. 15.07.2013 - TC 1314031 BEARING HOUSINGS, PILLOW OR PLUMMER BLOCK, grey cast iron OR spheroidal graphite cast iron Op. 17.04.2013 Dec. 15.07.2013 - TC 1313226
REPAIRED BEARINGS, JOURNAL, OIL FILM, COMPRESSOR, having BOTH of the following: (a) outer steel shell; (b) inside white metal lined For the purposes of this Order, these goods had been sent out of Australia for repair prior to importation Op. 14.09.2011 Dec. 12.12.2011 - TC 1131357

8483.30.90

8483.30.90 8483.30.90 8483.30.90

BEARING HOUSING SHELLS, DIESEL ENGINE CRANKSHAFT Op. 04.02.2011 Dec. 29.04.2011

- TC 1105087

BEARING HOUSINGS, BALL MILL, having a weight NOT less than 350 kg Op. 03.12.2009 Dec. 26.02.2010 - TC 0947041 BEARINGS, CRUSHER, being EITHER of the following: (a) spider bearings; (b) eccentric bushings Op. 09.06.2009 Dec. 04.09.2009 TILTING PAD THRUST BEARINGS Op. 15.07.2005 Dec. 23.09.2005 GUIDE VANE BEARINGS, STATOR Op. 17.08.2005 Dec. 28.10.2005

- TC 0919303 - TC 0509437 - TC 0510891

8483.30.90 8483.30.90 8483.30.90

BEARINGS, STEAM TURBINE, being housings incorporating white metal bearing shells Op. 10.02.2006 Dec. 28.04.2006 - TC 0603567 SHELLS, BEARING, TURBINE Op. 28.12.2006 Dec. 09.03.2007 - TC 0620223

8483.30.90 8483.30.90

GEAR BOX BEARING SHELLS, precision, turbine and generator, oil fed, all steel with a cast white metal lining Op. 31.01.1994 Dec. 13.05.1994 - TC 9402112 BEARINGS, plain, dry sliding, incorporating polytetrafluoroethylene (PTFE) or acetal resin layers to provide the sliding and lubricating properties Op. 12.07.1994 Dec. 28.10.1994 - TC 9406059 BEARINGS, precision, steam turbine thrust, oil fed, of steel construction, fitted with white metal inserts Op. 16.08.1994 Dec. 21.11.1994 - TC 9406859

8483.30.90

8483.30.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.30.90 PARTS OF OUTBOARD ENGINES OR INBOARD/OUTBOARD (STERNDRIVE) ENGINES, comprising ANY of the following: (a) bearing housings; (b) bushings Op. 05.01.1995 Dec. 21.04.1995 - TC 9500649 HOUSINGS, BEARING, self aligning, zinc alloy die cast, being pillow blocks or two bolt flange, having maximum weights as per following table: TABLE Shaft Diameter 10 mm 12 mm 15 mm 17 mm 20 mm 25 mm 30 mm 35 mm Op. 17.01.1995 8483.30.90 Pillow block 52 g 60 g 80 g 99 g 131 g 166 g 273 g 352 g Dec. 05.05.1995 Flange unit 35 g 45 g 55 g 72 g 106 g 116 g 172 g 257 g - TC 9500924

8483.30.90

BUSHINGS, spherically seated, self aligning, constructed from degassed bearing steel coated with dry film lubricant but NOT including ball or roller bearings Op. 22.09.1997 Dec. 28.11.1997 - TC 9708338 ROD ENDS, being self aligning bearings with male or female mounting arms Op. 24.11.1997 Dec. 27.02.1998 - TC 9710314 BEARINGS, spherical seated, self aligning consisting of minimum two piece unit and having ANY of the following sliding contact surfaces: (a) steel/steel; (b) steel/bronze; (c) hard chromium/polytetrafluroethylene; (d) hard chromium/polytetrafluroethylene fabric; (e) steel/polytetrafluroethylene; (f) hard chromium//polytetrafluroethylene foil Op. 15.05.1998 Dec. 07.08.1998 - TC 9804136 BEARINGS, OIL FILM, continuous lubrication, white metal coated Op. 28.02.2001 Dec. 04.05.2001 - TC 0102015 COUPLINGS, turbo, variable speed, scoop controlled, transmitting 248 kW or greater Op. 06.12.1983 Dec. 06.12.1983 - TC 8342125 BALL SCREWS Op. 06.12.1983 Dec. 06.12.1983 - TC 8342169 - TC 8530369

8483.30.90

8483.30.90

8483.30.90 8483.40

8483.40 8483.40 8483.40

GEARS, photocopying apparatus Op. 05.02.1985 Dec. 05.02.1985

TRANSMISSIONS, powershift, cycling, hydraulic, being gearboxes incorporating planetary gears and torque converters Op. 29.07.1985 Dec. 10.10.1986 - TC 8534028 GEARBOXES, planetary, decanter centrifuge, having a torque rating of 10 kN m or greater, but NOT including parts therefor Op. 31.12.1985 Dec. 16.02.1988 - TC 8535631

8483.40

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.40 CONVERTERS, torque, having a maximum input torque capacity exceeding 300 N m Op. 26.06.1985 Dec. 21.11.1986 - TC 8632704 TRANSAXLES, having the same number of forward and reverse gears, but NOT including parts therefor Op. 12.03.1986 Dec. 02.10.1987 - TC 8632779 TRANSMISSIONS, powershift, having ALL of the following: (a) hydraulically activated clutch; (b) designed minimum power input capacity exceeding 70 kW; (c) at least one forward and one reverse gear ratio; (d) capable of changing gear ratios under full input power Op. 17.09.1984 Dec. 21.11.1986 - TC 8635315 POWER TAKE-OFF UNITS, engine mounted, incorporating a driving ring type overcentre clutch, having a torque capacity NOT less than 160 N m Op. 10.04.1987 Dec. 19.07.1988 - TC 8734691 GEARHEADS, reduction, having a housing dia NOT exceeding 39 mm For the purposes of TC 8735018 housing dia does NOT include the dimensions of ANY mounting flanges or brackets Op. 22.09.1987 Dec. 16.02.1988 - TC 8735018 BOXES, indexing, loading equipment, but NOT including parts therefor Op. 28.10.1988 Dec. 01.08.1989 - TC 8810004 ROLLER SCREWS Op. 01.07.1996 Dec. 25.06.1996 - TC 9607180

8483.40

8483.40

8483.40

8483.40

8483.40

8483.40 8483.40.11

PARTS, PASSENGER MOTOR VEHICLE, manufactured at least 30 years before the goods are entered for home consumption, or reproductions of these parts, being ANY of the following: (a) gears; (b) gearing; (c) ball screws; (d) torque converters; (e) toothed wheels; (f) chain sprockets Op. 10.04.1997 Dec. 20.06.1997 - TC 9702625 GEARBOXES, HOT STRIP MILL, WATER CIRCULATION, COOLING TOWER, FAN DRIVE, being right angle double reduction Op. 13.11.2012 Dec. 04.02.2013 - TC 1243404 CYCLOIDAL SPEED REDUCERS Op. 30.07.2012 Dec. 15.10.2012 - TC 1227331

8483.40.90

8483.40.90 8483.40.90

TRANSFER CASES, having ALL of the following: (a) maximum input torque NOT greater than 8 000 nm; (b) maximum input shaft speed NOT greater than 3 500 rpm; (c) speed ratio NOT less than 1:2 and NOT greater than 1:1; (d) interaxle differential weight NOT greater than 125 kg; (e) oil capacity with differential NOT greater than 5.5 L; (f) oil capacity without differential NOT greater than 6.4 L; (g) operating temperature NOT greater than 100 degrees Celsius Op. 29.03.2012 Dec. 18.06.2012 - TC 1210471 SLIP ENERGY RECOVERY DRIVE SYSTEM, including ALL of the following: (a) liquid resistance starter; (b) slip energy recovery drive;

8483.40.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) isolation transformer; (d) control instrumentation Op. 30.01.2012 Dec. 31.05.2012 8483.40.90 8483.40.90 GEARBOXES, STEEL STRIP WELDER, METAL COATING LINE Op. 10.08.2011 Dec. 28.10.2011 - TC 1203280 - TC 1127009

GEAR ASSEMBLIES, BLAST FURNACE HOPPER, including BOTH of the following: (a) pinion drive gears; (b) toothed wheels Op. 21.07.2011 Dec. 17.10.2011 - TC 1124302 GEARCASE ASSEMBLIES, ROTARY DRIVE, MINING, including ALL of the following: (a) adapters; (b) keys; (c) shafts; (d) gears; (e) covers; (f) spacers; (g) nuts; (h) plates; (i) bearing carriers; (j) seal housings; (k) cases; (l) screws; (m) washers; (n) bearings; (o) pins; (p) bushings; (q) plugs; (r) snaprings; (s) name plates; (t) seals; (u) oil level windows; (v) shims; (w) tags; (x) fittings Op. 30.05.2011 Dec. 19.08.2011 - TC 1117018 GEARBOXES, SLAB CASTING PLANT COOLING TOWER, right angle worm, base mounted Op. 08.03.2011 Dec. 30.05.2011 - TC 1108447 GEARBOXES, TILT DRIVE, BLAST FURNACE, water cooled Op. 15.12.2010 Dec. 16.03.2011 - TC 1054740 GEARBOXES, COILER, HOT STRIP MILL, WORM DOUBLE REDUCTION Op. 09.03.2010 Dec. 28.05.2010 - TC 1011781 TRANSMISSIONS, PUMP, HYDRAULIC EXCAVATOR Op. 17.02.2010 Dec. 07.05.2010 - TC 1008466

8483.40.90

8483.40.90

8483.40.90 8483.40.90 8483.40.90 8483.40.90 8483.40.90

GEARBOXES, horizontal bevel helical gear, quadruple reduction Op. 03.02.2010 Dec. 23.04.2010 - TC 1006015 PARTS, STACKER AND RECLAIMER MACHINE, being EITHER of the following: (a) gearboxes; (b) slewing gears Op. 23.10.2009 Dec. 15.01.2010 - TC 0940178

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.40.90 GEARBOXES, REDUCTION, STRAND FEED ROLL, having BOTH of the following: (a) output NOT less than 10 kW and NOT greater than 20 kW; (b) speed NOT less than 1 000 rpm and NOT greater than 2 000 rpm Op. 03.09.2009 Dec. 20.11.2009 - TC 0932751 REDUCTION GEARBOXES, MAIN DRIVE, HOT STRIP MILL, comprising ALL of the following: (a) main gear housings; (b) spur gears; (c) pinion shafts and/or pinion gears Op. 24.08.2009 Dec. 13.11.2009 - TC 0931082 GEARBOX AND COUPLINGS, HOT STRIP MILL FINISHING MILL, comprising ALL of the following: (a) heat treated and fabricated main gear with double helical teeth; (b) carburised and case hardened pinion shaft with double helical teeth; (c) intermediate coupling; (d) motor coupling Op. 19.04.2005 Dec. 02.09.2005 - TC 0504554 DRIVES, CONVEYOR Op. 01.07.2005 Dec. 16.09.2005 - TC 0508492

8483.40.90

8483.40.90

8483.40.90 8483.40.90

GEAR SETS, WORM, DOUBLE ENVELOPING, comprising BOTH of the following: (a) cone gears; (b) worm wheels Op. 11.11.2005 Dec. 23.01.2006 - TC 0515956 REDUCERS OR IN-LINE GEARS, double reduction or two stage, comprising BOTH of the following: (a) horizontal right angle shaft; (b) motorised Op. 17.01.2006 Dec. 07.04.2006 - TC 0602456 REDUCERS, HORIZONTAL PARALLEL SHAFT, having ALL of the following: (a) 3 step gears; (b) input torque greater than 120 Kw; (c) output torque greater than 10 000 nM Op. 17.01.2006 Dec. 18.04.2006 - TC 0602457 WHEELS, WORM, consisting of ANY of the following: (a) cone worm rims; (b) cone worms; (c) shafts Op. 08.05.2006 Dec. 21.07.2006 GEARS, CONVEYOR DRIVE Op. 01.06.2006 Dec. 09.09.2006

8483.40.90

8483.40.90

8483.40.90

- TC 0608075 - TC 0616193

8483.40.90 8483.40.90

PARTS, OBSERVATION WHEEL, being EITHER of the following: (a) transmissions and hub modules; (b) tyre friction transmission drives Op. 16.04.2007 Dec. 29.06.2007 - TC 0705487 GEARS, PLANETARY, ROLL GRINDER Op. 24.10.2007 Dec. 30.01.2008 - TC 0718206

8483.40.90 8483.40.90

DRIVES, AERATOR, helical, output NOT less than 30 kW, comprising ANY of the following:

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(a) axle thrust bearings; (b) motor lanterns; (c) output couplings Op. 17.12.2007 Dec. 07.03.2008 8483.40.90

- TC 0721698

GEAR WHEEL SETS, AIR COMPRESSOR, comprising ALL of the following: (a) bull gears; (b) pinions; (c) oil film bearings being pinion radial, wheel and wheel radial/axial types; (d) oil retaining rings Op. 23.01.2008 Dec. 04.04.2008 - TC 0801272 GEARBOXES, COILBOX, HOT STRIP MILL Op. 21.04.2008 Dec. 11.07.2008 - TC 0804751

8483.40.90 8483.40.90 8483.40.90 8483.40.90 8483.40.90 8483.40.90

PARTS, GRINDING MILL, being drivetrains OR gearboxes Op. 08.05.2008 Dec. 04.08.2008 - TC 0807191 PARTS, BALL MILL, being gears Op. 06.06.2006 Dec. 08.08.2008 TRANSMISSIONS, LOCOMOTIVE Op. 28.08.2008 Dec. 14.11.2008 - TC 0825364 - TC 0828507

ASSEMBLIES, GEARBOX AND PINION, STEEL STRIP FINISHING MILL Op. 01.10.2008 Dec. 19.12.2008 - TC 0833618 ASSEMBLIES, PINION GEARBOX, MILL STAND, FINISHING MILL, consisting of ALL of the following; (a) pinion gearboxes; (b) hubs; (c) couplings Op. 09.10.2008 Dec. 14.01.2009 - TC 0834725 PARTS, BOGIE REMOVAL SYSTEM, LOCOMOTIVE AND/OR RAILWAY ROLLING STOCK, programmable logic controlled, electromechanical, being EITHER of the following: (a) gearboxes; (b) couplings Op. 04.12.2008 Dec. 27.02.2009 - TC 0844881 GEAR BOXES, spiroidal, right-angled Op. 11.11.1993 Dec. 21.05.2009 SLEWING RINGS, hydraulic excavator Op. 19.07.1993 Dec. 29.10.1993 - TC 0913318 - TC 9307033

8483.40.90

8483.40.90 8483.40.90 8483.40.90

ROTARY GROUPS, being the assembly of rotating components between the end cover and swashplate that causes the displacement of oil in hydraulic pumps or motors, comprising ALL the following major components: (a) cylinder barrel; (b) pistons; (c) retaining plate Op. 20.06.1994 Dec. 13.10.1994 - TC 9405257 PARTS OF OUTBOARD ENGINES OR INBOARD/OUTBOARD (STERNDRIVE) ENGINES, comprising ANY of the following: (a) gears; (b) gearing; (c) gearboxes; Op. 05.01.1995 Dec. 23.06.1995 - TC 9500650

8483.40.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.40.90 8483.40.90 SWING MACHINERY, 360 degree slewing hydraulic excavator Op. 05.01.1995 Dec. 03.07.1995 - TC 9500666 GEARS, FISHING REEL, brass, titanium and aluminium alloy, having an outside diameter from 5 mm to 48 mm (both inclusive) and number of teeth from 5 to 70 (both inclusive) Op. 09.02.1995 Dec. 23.06.1995 - TC 9501520 GEARBOXES, hardened steel, 3 way drive, power ratio 2:1, contained in a zinc casting having an outer dimension of 40 mm x 50 mm x 33mm Op. 25.05.1995 Dec. 01.09.1995 - TC 9505750 PARTS, COTTON PICKER HEAD, being gears Op. 03.10.1995 Dec. 05.01.1996 GEARS AND GEARING, LONGWALL SHEARERS Op. 01.08.1996 Dec. 18.10.1996 - TC 9511092

8483.40.90

8483.40.90

8483.40.90 8483.40.90

- TC 9609395

RINGS, SLEWING, geared, having enclosed ball OR roller bearings and carburised OR surface hardened raceways Op. 23.02.1998 Dec. 11.05.1998 - TC 9801569 GEARHEADS, REDUCTION, DC ELECTRIC MOTOR, having BOTH of the following: (a) housing diameter NOT exceeding 47 mm; (b) housing length NOT exceeding 107 mm Op. 26.03.1998 Dec. 05.06.1998 - TC 9802586 DRIVES, AUTOMOTIVE STARTER MOTOR, 6 V, 12 V or 24 V, having a power rating of 2 kW or greater Op. 29.07.1998 Dec. 09.10.1998 - TC 9806738 SPEED DRIVES, MECHANICAL ADJUSTABLE Op. 18.02.2000 Dec. 28.04.2000 - TC 0001831

8483.40.90

8483.40.90

8483.40.90 8483.40.90

TRANSMISSIONS, FORKLIFT TRUCK, being EITHER of the following: (a) gearboxes; (b) drive axles (including drive wheels); but NOT including ANY of the following: (a) clutches; (b) propeller shafts; (c) universal joints; (d) pneumatic tyres and tubes Op. 23.06.2000 Dec. 21.07.2000 - TC 0006504 TRANSMISSIONS, AGRICULTURAL EQUIPMENT, being EITHER of the following: (a) gearboxes; (b) drive axles including drive wheels; but not including ANY of the following: (a) clutches; (b) propeller shafts; (c) universal joints; (d) pneumatic tyres and tubes Op. 24.08.2000 Dec. 03.11.2000 - TC 0007393 AXLES, DRIVE OR DRIVE AND STEER, planetary Op. 05.01.2001 Dec. 16.03.2001 - TC 0100118

8483.40.90

8483.40.90 8483.40.90

TRANSMISSIONS, MARINE, having BOTH of the following:

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(a) hydraulically OR mechanically activated clutch; (b) Not less than one forward and one reverse gear ratio Op. 28.02.2002 Dec. 24.05.2002 - TC 0201796 8483.40.90 8483.40.90 SPEED REDUCERS, shaft mounted Op. 25.10.2002 Dec. 21.01.2003 - TC 0210095

GEARBOXES, right angle worm, shaft mounted, having a maximum worm centre size 90 mm Op. 25.10.2002 Dec. 21.01.2003 - TC 0210096 TRANSMISSIONS, TRACK LAYING, SELF PROPELLED MACHINERY, planetary gearing Op. 14.07.2003 Dec. 03.10.2003 - TC 0308602 GEARBOXES, IRRIGATION TOWER WHEEL, right angle worm, having ALL of the following: (a) height and width NOT greater than 381 mm; (b) depth NOT greater than 345 mm; (c) weight NOT greater than 75 kg Op. 12.08.2003 Dec. 24.10.2003 - TC 0309917 CONVERTERS, TORQUE, maximum input torque capacity exceeding 150 N.m Op. 01.01.1998 Dec. 19.02.2004 - TC 0401336 PARTS, PLANETARY GEAR DRIVE, SINGLE SPEED, being ANY of the following: (a) right angle drive reduction gears, fixed ratio; (b) reduction gears having 1, 2, 3 or 4 stages, comprising BOTH of the following: (i) reduction gear planet carrier/sun gear assembly, fixed ratio; (ii) annular gear ring, outside diameter NOT less than 185 mm and NOT greater than 940 mm; (c) pinion gears, having a splined input drive without bearings Op. 14.04.2004 Dec. 09.07.2004 - TC 0403816 BOGIFLEX OR HAFLEX GEARBOXES, SPIKE ROLL CRUSHER, twin pinion, shaft mounted spur gear, diameter of crown rollers greater than 1 700 mm Op. 20.07.2004 Dec. 11.10.2004 - TC 0407407 PINIONS, STEEL STRIP ROLLING MILL, having ALL of the following: (a) outside diameter greater than 550 mm; (b) length greater than 1 480 mm; (c) carburized, hardened and tempered Op. 23.02.2005 Dec. 06.05.2005 - TC 0502546 PULLEYS, being fully enclosed within poultry feeding equipment disc corners Op. 01.07.1983 Dec. 01.07.1983 - TC 8334122 PARTS FOR DIESEL ENGINES, being EITHER of the following: (a) fan hub pulleys having provisions for attaching fan blades; (b) flywheels Op. 08.02.1991 Dec. 08.02.1991 - TC 9100655 STATIONARY ADJUSTABLE PULLEYS Op. 02.08.2012 Dec. 15.10.2012 PULLEYS, STRINGING, ELECTRICAL CONDUCTOR LINE Op. 05.02.2010 Dec. 23.04.2010 - TC 1227978 - TC 1006517

8483.40.90

8483.40.90

8483.40.90

8483.40.90

8483.40.90

8483.40.90

8483.50

8483.50

8483.50.90 8483.50.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.50.90 8483.50.90 ROPE SHEAVES Op. 26.10.2009 Dec. 15.01.2010 - TC 0940330 - TC 0803403

PULLEYS, VENTILATED, COOLING TOWER Op. 22.02.2008 Dec. 09.05.2008

8483.50.90

PARTS OF OUTBOARD ENGINES OR INBOARD/OUTBOARD (STERNDRIVE) ENGINES, comprising ANY of the following: (a) pulleys; (b) flywheels Op. 05.01.1995 Dec. 21.04.1995 - TC 9500652 POWERHEAD, FLY WHEELS Op. 10.07.1995 Dec. 20.10.1995 - TC 9508800

8483.50.90 8483.50.90

IDLERS, track laying excavator, having a 360 degrees revolving superstructure and an operating weight exceeding 12 t Op. 06.02.1997 Dec. 11.04.1997 - TC 9701079 UNIVERSAL JOINT KITS, having a minimum torsional strength capacity exceeding 3 500 N m elastic limit, comprising ANY of the following components: (a) spiders; (b) needle rollers; (c) seals; (d) circlips or lock plates; (e) lubricators Op. 01.07.1983 Dec. 26.05.1986 - TC 8332843 CLUTCHES, air, having a torque exceeding 57 944 N m Op. 06.12.1983 Dec. 06.12.1983 - TC 8342067 CLUTCHES, power take-off, marine, having 1, 2 or 3 independent drives Op. 06.12.1983 Dec. 06.12.1983 - TC 8342071 COUPLINGS, disc type, constant velocity, angle of operation 18 degrees or greater Op. 06.12.1983 Dec. 06.12.1983 - TC 8342121 CLUTCH ELEMENT ASSEMBLIES, having a capacity exceeding 6 775 N m Op. 06.12.1983 Dec. 06.12.1983 - TC 8342129 JOINTS, constant velocity, shaft dia 30 mm or greater, having an ultimate torque capacity exceeding 2 230 N m Op. 06.12.1983 Dec. 06.12.1983 - TC 8342148 ROD ENDS incorporating self aligning bearings Op. 22.09.1987 Dec. 16.11.1987 COUPLINGS, dry laminated diaphragm type Op. 30.09.1991 Dec. 07.01.1992 - TC 8734694 - TC 9108641

8483.60

8483.60 8483.60 8483.60

8483.60 8483.60

8483.60 8483.60 8483.60

CLUTCHES, CAM, capable of operating at shaft speeds 700 rpm or greater, being ANY of the following: (a) direct shaft mounted type; (b) chain coupling type; (c) cam clutch box with input or input/output shafts, but NOT including backstops when imported as initial spares or replacement parts. Op. 03.07.1992 Dec. 14.01.1993 - TC 9206294

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.60.90 8483.60.90 COUPLINGS, HYDRODYNAMIC OR HYDRAULIC FLUID Op. 10.07.2012 Dec. 26.09.2012 - TC 1224114

PARTS, PLANETARY GEARBOX, being EITHER of the following: (a) torque limiters; (b) shrink discs Op. 25.03.2009 Dec. 19.06.2009 - TC 0910068 COUPLINGS, SHAFT, PLANETARY GEARBOX Op. 25.03.2009 Dec. 12.06.2009 - TC 0910069

8483.60.90 8483.60.90

UNIVERSAL SHAFTS, WORM AND SPUR GEARBOX, SPIKE ROLL CRUSHER Op. 15.11.2005 Dec. 13.02.2006 - TC 0516027 PARTS, WALKING BEAM FURNACE, being ANY of the following: (a) drive shaft couplings; (b) pinion couplings; (c) drive shaft extensions Op. 25.11.2005 Dec. 13.02.2006 - TC 0516607 DRIVE SHAFTS, CHARGE ROLLER TABLE, WALKING BEAM FURNACE, having BOTH of the following: (a) length NOT less than 600 mm; (b) diameter NOT less than 220 mm Op. 06.04.2006 Dec. 30.06.2006 - TC 0606251 COUPLINGS, FLUID, TURBO Op. 26.02.2007 Dec. 18.05.2007 - TC 0703038

8483.60.90

8483.60.90

8483.60.90 8483.60.90 8483.60.90

COUPLINGS, MOTOR TO GEARBOX, HOT STRIP STEEL MILL STANDS Op. 27.06.2007 Dec. 07.09.2007 - TC 0710069 PARTS, PLATE MILL, being couplings and coupling halves Op. 08.10.2007 Dec. 14.12.2007 - TC 0716978 CLUTCHES, LAMINAL FRICTION, ROLL GRINDER Op. 04.02.2008 Dec. 11.04.2008

8483.60.90 8483.60.90

- TC 0802002

CLUTCHES, incorporating eccentric cams, being ANY of the following: (a) overrunning; (b) indexing; (c) backstopping Op. 01.07.1994 Dec. 26.10.1994 - TC 9317553 COUPLINGS, flexible, incorporating interchangeable styrene-butadiene rubber elements providing a variation in torsional stiffness, having BOTH of the following: (a) a torque rating of 40kNm to 600kNm inclusive; (b) a torsional stiffness at nominal torque of 1733kNm/RAD to 54600kNm/RAD inclusive Op. 01.07.1994 Dec. 26.10.1994 - TC 9318653 CLUTCHES, torque limiting, spring loaded, having ALL of the following: (a) torque range 1.96 - 49.1 Nm (both inclusive); (b) maximum speed 200 rpm Op. 25.07.1994 Dec. 07.11.1994 - TC 9406294 POWERHEAD, CLUTCHES Op. 10.07.1995 Dec. 20.10.1995 - TC 9508786

8483.60.90

8483.60.90

8483.60.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.60.90 CLUTCHES, FAN, 24 V DC, being EITHER of the following: (a) torque limiting; (b) thermostatic Op. 26.07.1995 Dec. 17.11.1995 - TC 9509278 CLUTCHES, WRAP SPRING Op. 25.08.1999

8483.60.90 8483.60.90 8483.60.90

Dec. 08.11.1999

- TC 9906455 - TC 0003515

CLUTCHES, AGRICULTURAL EQUIPMENT Op. 05.04.2000 Dec. 16.06.2000

COUPLING ASSEMBLIES, AIR COMPRESSOR/TURBINE, consisting of ANY of the following: (a) couplings; (b) coupling hubs; (c) coupling sleeves; (d) spacers Op. 26.03.2002 Dec. 14.06.2002 - TC 0202532 SPROCKETS, VARIABLE VALVE TIMING, MOTOR VEHICLE Op. 16.01.2012 Dec. 02.04.2012 - TC 1201884

8483.90.00 8483.90.00

PARTS, WHEEL MOTOR, DUMP TRUCK, being gear and pinion Op. 14.12.2010 Dec. 07.03.2011 - TC 1054638 REPAIRED PARTS, OIL FILM BEARING, being EITHER of the following: (a) sleeves; (b) bushings For the purposes of this Order, these goods had been sent out of Australia for repair prior to importation Op. 09.08.2010 Dec. 21.01.2011 - TC 1102631 PARTS, MUD MOTOR DRIVESHAFT OR BEARING ASSEMBLY, being ANY of the following: (a) adapters; (b) balancing pistons; (c) bearing mandrels; (d) floating pistons; (e) housing races; (f) housings; (g) protectors; (h) rotors; (i) shaft races; (j) shafts; (k) shims; (l) splined mandrels; (m) stators Op. 12.04.2011 Dec. 14.09.2011 - TC 1112414 PARTS, GEARBOX, STEEL ROLLING MILL STAND, being ANY of the following: (a) wobblers and/or couplings; (b) coupling sleeves; (c) flanges; (d) housings and/or covers Op. 06.11.2009 Dec. 22.01.2010 - TC 0941857 SPROCKETS, EXCAVATOR DRIVE, having a weight NOT less than 1 100 kg Op. 06.10.2009 Dec. 30.12.2009 - TC 0937861

8483.90.00

8483.90.00

8483.90.00

8483.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.90.00 PARTS, TRANSMISSION, EARTH MOVER AND/OR EXCAVATOR, being ANY of the following: (a) carriers; (b) housings; (c) shafts; (d) deflectors; (e) retaining rings; (f) covers; (g) gears; (h) plates; (i) casings; (j) spindles; (k) sprockets; (l) plugs; (m) supports; (n) drums; (o) spacers; (p) pins; (q) cartridges; (r) shims; (s) retainers Op. 28.07.2009 Dec. 16.10.2009 - TC 0927028 PARTS, GEARBOX, SINTER PLANT, being unassembled tension bars comprising ALL of the following: (a) protection caps; (b) packing rings; (c) distance rings; (d) castell nuts; (e) hinge bearings; (f) cup springs; (g) cotter pins; (h) nuts; (i) lubrication nipples; (j) sealing discs; (k) tension bars Op. 25.05.2009 Dec. 25.09.2009 - TC 0917591 GIRTH GEARS, BALL MILL Op. 09.06.2009 Dec. 04.09.2009 - TC 0919305

8483.90.00

8483.90.00 8483.90.00

PARTS, PLANETARY GEARBOX, being EITHER of the following; (a) protective covers; (b) motor plates or motor mounting frames Op. 25.03.2009 Dec. 19.06.2009 - TC 0910066 SPROCKETS, WINCH DRUM, OIL AND GAS EXPLORATION AND PRODUCTION, having NOT less than 29 teeth and NOT greater than 83 teeth Op. 20.03.2009 Dec. 05.06.2009 - TC 0909475 SPROCKET ASSEMBLIES, CONVEYOR, having ALL of the following: (a) single or dual sprockets; (b) fixed or slipping sleeves; (c) precision ground ball bearings; (d) inner bushes; (e) outer seals Op. 17.03.2009 Dec. 12.06.2009 - TC 0909028 PARTS, GEARBOX, SCREEDING MACHINE, being EITHER of the following: (a) toothed wheels; (b) tail wheels Op. 27.01.2009 Dec. 24.04.2009 - TC 0902629

8483.90.00

8483.90.00

8483.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8483.90.00 8483.90.00 INSERTS, RADIAL PAD BEARING Op. 15.07.2005 Dec. 23.09.2005 PARTS, WIND-POWERED GENERATOR, being yaw rings Op. 09.09.2005 Dec. 25.11.2005 - TC 0509436 - TC 0512083

8483.90.00

PARTS, GEAR SETS, WORM, DOUBLE ENVELOPING, being ANY of the following: (a) cone gears; (b) worm wheels; (c) shims; (d) bearing cones; (e) bearing cups; (f) worm bearing carriers; (g) carrier worm bearings Op. 11.11.2005 Dec. 23.01.2006 - TC 0515955 DEFLECTORS, WATER, OIL FILM BEARING Op. 05.06.2006 Dec. 18.08.2006

8483.90.00 8483.90.00

- TC 0609976

PARTS, GEAR SPINDLE, STEEL STRIP ROLLING MILL, being ANY of the following: (a) bushes or bushings; (b) hubs; (c) spindles Op. 11.05.2007 Dec. 13.07.2007 - TC 0701853 BUSHES, BEARING, GRINDING WHEEL SPINDLE Op. 04.02.2008 Dec. 11.04.2008 - TC 0802001

8483.90.00 8483.90.00 8483.90.00 8483.90.00

PINIONS AND/OR PINION SHAFT, GEARBOX, STEEL STRIP FINISHING MILL Op. 01.10.2008 Dec. 19.12.2008 - TC 0833621 PARTS, TRACK LAYING EXCAVATOR, being track pad drive tumblers Op. 07.10.2008 Dec. 12.01.2009 - TC 0834339 PARTS OF OUTBOARD ENGINES OR INBOARD/OUTBOARD (STERNDRIVE) ENGINES Op. 05.01.1995 Dec. 21.04.1995 - TC 9500651 POWERHEAD CLUTCH PARTS, being ANY of the following: (a) clutch carrier or spider; (b) clutch drum; (c) clutch shoe; (d) support; (e) retainer; (f) needle cage; (g) clip; (h) sprocket Op. 10.07.1995 Dec. 20.10.1995 - TC 9508803 PARTS, LONGWALL SHEARER TRANSMISSION SHAFT ASSEMBLIES, being ANY of the following: (a) bearing cylinder roller, including housing; (b) rotary shaft seal; (c) gear coupling; (d) spindle; (e) end plug; (f) splined insert; (g) seal housing; (h) end cover

8483.90.00

8483.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


Op. 31.07.1996 8483.90.00 PARTS, (a) (b) (c) (d) (e) (f) Dec. 18.10.1996 - TC 9609355

BALL SCREW, being ANY of the following: nuts; shafts; spindles; mounting flanges; nut seals; brush wipers whether OR not combined with end caps OR snap rings Op. 05.01.1998 Dec. 16.04.1998

- TC 9800024

8483.90.00

PARTS, BALL MILL CLUTCH, being ANY of the following: (a) driving ring; (b) centre plate; (c) floating plate; (d) adaptor ring; (e) press plate; (f) friction disc; (g) air tube; (h) hub; (i) back plate Op. 01.07.1998 Dec. 25.09.1998 - TC 9805750 PARTS, OIL FILM BEARING, being ANY of the following: (a) sleeves; (b) bushings; (c) end plates or end covers Op. 28.02.2001 Dec. 04.05.2001 - TC 0102016 PARTS, STEEL STRIP ROLLING MILL ROLL END COUPLINGS, being ANY of the following: (a) roll end casings; (b) drive end casings; (c) lip or glyd seal retainer housings; (d) spindles; (e) gear rings; (f) hub gears; (g) thrust buttons; (h) buffer rings; (i) spring stops Op. 14.03.2001 Dec. 25.05.2001 - TC 0102346 PARTS, STEEL STRIP ROLLING MILL ROLL END COUPLINGS, being ANY of the following: (a) thrust plates; (b) spring guides; (c) drive end ring gears; (d) seal retainers and seal housings; (e) spherical bushings and spherical rings; (f) end plates, but NOT including ANY parts for couplings with a motor power rating of less than 4 100 kilowatts Op. 22.05.2001 Dec. 23.10.2001 - TC 0104261 PARTS, (a) (b) (c) (d) (e) (f) (g) OIL FILM BEARING, being ANY of the following: keys; roll necks; bands; chocks and packing; neck seals; pins and lockpins; housings;

8483.90.00

8483.90.00

8483.90.00

8483.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(h) rings Op. 18.02.2002 8484.10.90 8484.20 8484.20 8484.20.00 Dec. 10.05.2002 - TC 0201466 - TC 0610262

GASKETS, CHANNEL COVER, metal jacket Op. 13.06.2006 Dec. 01.09.2006

SEALS, stern tube, marine, oil pollution preventing Op. 01.07.1996 Dec. 25.06.1996 - TC 9607162 RINGS, "O", stainless steel Op. 01.07.1996 Dec. 25.06.1996 - TC 9607163

CONNECTOR ASSEMBLIES, FLOWLINE, whether OR not assembled, having ALL of the following: (a) threaded studs; (b) clamps; (c) butt weld hubs; (d) nuts; (e) seal ring Op. 30.10.2012 Dec. 21.01.2013 - TC 1241372 SEALS, GASHOLDER, including ALL of the following: (a) rubbing bars; (b) bulkhead extension plates; (c) fabric seals; (d) angle cleats; (e) packers; (f) clamps; (g) timber seal supports; (h) fasteners Op. 20.03.2012 Dec. 15.06.2012

8484.20.00

- TC 1209076

8484.20.00

PLUNGER OR PISTON MECHANICAL SEALS, LABYRINTH OR DYNAMIC OR PACKED Op. 24.02.2012 Dec. 14.05.2012 - TC 1206408 MECHANICAL SEALS, LABYRINTH OR DYNAMIC OR PACKED, having BOTH of the following: (a) minimum continuous spray pressure 1 600 bar; (b) maximum continuous spray pressure 3 800 bar Op. 16.09.2011 Dec. 23.01.2012 - TC 1131715 MECHANICAL SEALS, OIL, having an internal diameter NOT less than 630 mm Op. 13.10.2011 Dec. 04.01.2012 - TC 1134549 SEALS, ELECTRODE, ELECTRIC ARC FURNACE, including guide pads Op. 05.11.2010 Dec. 31.01.2011 - TC 1049412 MECHANICAL SEALS, CARBON RING Op. 18.10.2010 Dec. 10.01.2011 - TC 1046698

8484.20.00

8484.20.00

8484.20.00 8484.20.00 8484.20.00

SEALS, NON-CONTACTING, being EITHER of the following: (a) dry running gas seals; (b) gas lubricated dual seals Op. 04.10.2005 Dec. 23.12.2005 - TC 0513456 SEAL (a) (b) (c) (d) (e) SETS, OIL FILM BEARING, consisting of All of the following: neck seal with band; seal end plate; seal inner ring; deflector ring; coolant seal;

8484.20.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(f) screws; (g) round body ring; (h) bumper Op. 10.03.2006 8484.20.00

Dec. 26.05.2006

- TC 0605044

PARTS, GASHOLDER MECHANICAL SEAL, being ANY of the following: (a) rubbing bars; (b) bulkhead extension plates; (c) fabric seals; (d) round bar fenders; (e) cleats; (f) packers; (g) metal canvas holders Op. 22.11.2006 Dec. 02.03.2007 - TC 0618735 PARTS, BLAST FURNACE HOT BLAST VALVE, being ANY of the following: (a) mechanical seals; (b) stuffing boxes; (c) seal rings Op. 28.11.2006 Dec. 02.03.2007 - TC 0618985 SEALS, (a) (b) (c) OIL, being ANY of the following: diaphragm; bellows; two sections steel seal, sealed on the outer surface by two (2) O-rings made of EITHER of the following: (i) toric nitrile silicone; (ii) copolymer of vinylidene fluoride and hexa-fluoropropene Op. 14.05.1996 Dec. 09.09.1996 - TC 9607141

8484.20.00

8484.20.00

8484.20.00

SEAL, PROPELLOR SHAFT, consisting of ALL of the following: (a) stainless steel hose clamps; (b) nylon mesh reinforced rubber bellow; (c) carbon flange; (d) stainless steel rotor; (e) stainless steel set screws; (f) O-rings Op. 01.07.1996 Dec. 25.06.1996 - TC 9607183 SEALS, oil, floating Op. 27.02.1997 Dec. 23.05.1997 - TC 9701735

8484.20.00 8484.20.00

SEALS, LUBRICANT, having ALL of the following: (a) EITHER single lip, dual opposed lip, dual tandem lip OR external lip; (b) shaft diameter between 6 mm and 2 300 mm (both inclusive); (c) sealing capacity at a speed of 300 m/min OR greater; (d) shaft misalignment sealing capacity in the range 0.13 mm to 3.18 mm (both inclusive) at shaft speeds in the range 150 m/min to 2 135 m/min; (e) shaft dynamic run out sealing capacity in the range 0.13 mm to 3.18 mm (both inclusive) at shaft speeds in the range 150 m/min to 2 135 m/min Op. 22.04.1998 Dec. 03.07.1998 - TC 9803361 SEALS, 3.5 t OR GREATER (GVW) VEHICLE DRIVE AXLE, having EITHER of the following: (a) outside diameter of rubber, bonded to the body of the seal; OR (b) inner sealing element of leather impregnated with polysulphide rubber Op. 17.06.1998 Dec. 28.08.1998 - TC 9805235

8484.20.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8484.20.00 SEALS, OIL, consisting of: (a) steel sealing rings; (b) washers of compounded elastomers Op. 09.09.1998 Dec. 13.11.1998

- TC 9808012

8484.20.00

PARTS, OIL FILM BEARING MECHANICAL SEALS, being ANY of the following: (a) coolant seals; (b) inner rings; (c) double sided seals; (d) end plates Op. 06.03.2001 Dec. 11.05.2001 - TC 0102067 MECHANICAL SEALS, OIL FILM BEARING Op. 06.03.2001 Dec. 11.05.2001 STRIPS, SEALING, AIR COMPRESSOR TURBINE BLADES Op. 05.06.2006 Dec. 18.08.2006

8484.20.00

- TC 0102069

8484.90.90 8484.90.90

- TC 0609970

PARTS, ROLL END COUPLING, being ANY of the following: (a) swivel rod seals; (b) piston seals; (c) axial face seals Op. 09.06.2006 Dec. 25.08.2006 - TC 0610076 DIODE POTTING MACHINES, resin mixing, metering and casting, programmable logic controlled, having ALL of the following: (a) dispensing head; (b) vacuum chamber; (c) doser mixer module; (d) resin pre-mixer module; (e) vacuum pumps; (f) control cabinets Op. 08.12.2010 Dec. 07.03.2011 - TC 1053531 PHOTOVOLTAIC MODULE PRODUCTION LINE, having ALL of the following: (a) combined stringer tabbing machine; (b) lay up station; (c) soldering machine; (d) glass loading station; (e) film cutter and loading stations; (f) back-sheet laminate cutting and loading station; (g) laminating stations; (h) trimming stations; (i) aluminium framing station; (j) junction box installation station; (k) inspection and testing stations; (l) buffer stations; (m) conveyors Op. 14.09.2011 Dec. 12.12.2011 - TC 1131510 PHOTOVOLTAIC MODULES PRODUCTION LINE, programmable logic controlled, comprising ALL of the following: (a) testers; (b) robotic pick and place machines; (c) magazines and/or trays; (d) generators; (e) conveyors; (f) ovens; (g) unloading machines; (h) loading machines; (i) traversing machines;

8486.20.30

8486.40.90

8486.40.90

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(j) washing machines; (k) drying machines; (l) cleaning machines; (m) feeders; (n) controllers; (o) graders; (p) carriers; (q) printers; (r) clean room housings; (s) filters; (t) fans; (u) water supply systems; (v) airlocks; (w) gas supply systems; (x) air conditioners; (y) epoxy coating liner; (z) electrical systems; (aa) cooling machines; (ab) lighting; (ac) air compressors; (ad) pipes; (ae) distribution boards Op. 27.01.2009 Dec. 24.04.2009 8487.10.00

- TC 0902572

PROPELLERS, OUTBOARD OR STERNDRIVE ENGINE, being ANY of the following and having ANY of the diameter and pitch combinations specified in the TABLE hereunder: (a) rubber bushed hub; (b) exhaust through hub; (c) pin driven; (d) spline driven, Diameter (cm) 18.8 19.0 20.0 21.5 22.5 22.9 23.0 23.5 24.1 25.4 26.0 28.0 28.3 28.6 28.9 29.2 29.5 33.0 33.7 34.3 35.2 35.6 Op. 31.12.2009 Pitch (cm) 11.5, 12.2, 13.5 15.0, 15.2, 16.5, 17.8 13.0, 15.0, 17.0, 19.0 18.0 20.5, 23.0, 25.5 21.0, 23.5 27.0, 30.0 20.5, 21.6, 25.4, 28.0 24.1 16.5 22.9, 25.4, 28.0, 30.5, 33.0, 35.6, 38.1 43.2 40.6 38.1 35.6 22.9, 25.4, 28.0, 33.0 30.5 45.7, 48.3, 53.3 43.2 38.1 38.1, 58.4 28.0, 58.4 Dec. 26.03.2010 - TC 1000126

8487.10.00

PROPELLERS, OUTBOARD OR STERNDRIVE ENGINE, being EITHER of the following: (a) stainless steel; (b) being ANY of the following and having ANY of the diameter and pitch combinations specified in the TABLE hereunder: (i) rubber-bushed hub; (ii) exhaust-through-hub;

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(iii) pin-driven; or (iv) spline-driven TABLE Diameter (cm) 11.4 14.0 15.6 16.2 18.4 19.1 20.3 20.9 21.6 21.9 22.9 23.5 23.8 24.1 25.4 26.3 26.7 27.3 27.9 28.6 29.2 29.8 30.5 30.8 31.1 31.8 32.4 33.0 33.7 34.3 34.9 35.2 35.6 35.9 36.2 36.8 38.1 39.3 41.9 Op. 01.01.2007 Pitch (cm) 15.9 14.0 15.9 14.0 12.7 16.5 17.8, 18.4, 22.9 22.9 14.0 22.9, 25.4, 16.5, 17.8, 30.5, 33.0 22.9 25.4, 27.9, 12.7, 17.8, 30.5, 33.0, 35.6 27.9, 30.5, 27.9 22.9 17.8, 48.3, 48.3 43.2 20.3 35.6 38.1 33.0, 40.6 58.4 27.9, 35.6 53.3, 58.4 45.7, 50.8, 63.5, 68.6 27.9, 33.0, 43.2, 48.3, 22.9, 27.9, 38.1, 40.6, 50.8, 53.3 53.3 25.4, 48.3, 73.7 43.2, 45.7, 55.9, 60.9, 38.1, 40.6, 33.0, 35.6, 40.6 Dec. 15.11.2006

21.6

27.9 20.3, 22.9, 27.9, 31.8 22.9, 23.5, 27.9, 38.1, 43.2 33.0, 35.6, 40.6 53.3

55.9, 58.4, 60.9, 38.1 53.3 30.5, 33.0, 35.6, 43.2, 45.7, 48.3, 53.3, 58.4, 68.6, 48.3, 50.8, 66.0, 71.1 43.2 38.1 - TC 0614315

8487.90.00

SEALS, RADIAL SHAFT, consisting of ALL of the following: (a) inner rubber OR polytetrafluoroethylene (PTFE) lip; (b) lip garter spring; (c) metal outer layer, with OR without acrylic polymer coating Op. 17.04.2013 Dec. 15.07.2013 - TC 1313054
REPAIRED ROLL CORES AND/OR ROLL BODIES, cylindrical, being ANY of the following: (a) bridle; (b) deflector;

8487.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


(c) (d) (e) (f) (g) (h) (i) (j) (k) pinch; wringer; squeegee; feeder; support; snubber; wiper; oiler; dam

For the purpose of this Order, these goods have been sent out of Australia for repair prior to re-importation Op. 03.10.2012 Dec. 27.12.2012 - TC 1237608 8487.90.00 ROTARY UNIONS, ROTARY JOINTS, ROTARY COUPLINGS AND/OR ROTARY DISTRIBUTORS, hydraulic OR pneumatic Op. 20.05.2011 Dec. 19.08.2011 - TC 1116081 PARTS, TURBINE SHAFT, being labyrinth seals incorporating labyrinth rings and caulking wire Op. 18.10.2010 Dec. 10.01.2011 - TC 1046704 ROLLS, ABSORBING, WRINGER OR OILER Op. 15.12.2009 Dec. 05.03.2010 SEALS, PLANETARY GEARBOX Op. 25.03.2009 Dec. 12.06.2009 - TC 0948896 - TC 0910047 - TC 0614316

8487.90.00

8487.90.00 8487.90.00 8487.90.00 8487.90.00

INDICATORS, pneumatic visual Op. 01.01.2007 Dec. 15.11.2006

LUBRICATORS, grease or oil, being ANY of the following: (a) grease, screw pressure feed; (b) grease, spring pressure feed; (c) oil cups and oilers Op. 01.01.2007 Dec. 15.11.2006 - TC 0614317 COOLERS, oil, air to oil type, steel nested fin type, having BOTH of the following: (a) a working pressure exceeding 830 kPa but NOT exceeding 3 100 kPa; (b) dimensions NOT exceeding 1 200 mm x 1 200 mm x 100 mm Op. 01.01.2007 Dec. 15.11.2006 - TC 0614318 ROLLS, bowed, incorporating rotating swivel worm gear adjustment Op. 01.01.2007 Dec. 15.11.2006 - TC 0614342 CONNECTORS, hub to shaft, being connectors for shaft dia exceeding 300 mm Op. 01.01.2007 Dec. 15.11.2006 - TC 0614343 NIPPLES, GREASE, non corrosive, having ANY of the following: (a) stainless steel body, spring and ball; (b) monel body and ball with inconel spring Op. 01.01.2007 Dec. 15.11.2006 - TC 0614344 NIPPLES, grease or oil, plated steel or brass Op. 01.01.2007 Dec. 15.11.2006 PARTS, PLASMA ARC CUTTING MACHINE Op. 01.01.2007 Dec. 15.11.2006 - TC 0614345 - TC 0614346

8487.90.00

8487.90.00

8487.90.00

8487.90.00

8487.90.00 8487.90.00

Item 50 applies unless otherwise stated.

Tariff Description ===========================================================================


8487.90.00 8487.90.00 8487.90.00 JOINTS, rotary pressure Op. 01.01.2007 Dec. 15.11.2006 - TC 0614347 - TC 0614348

PARTS, rotary pressure joint Op. 01.01.2007 Dec. 15.11.2006

BEARING ISOLATOR, labyrinth pattern, consisting of ALL of the following: (a) stator; (b) rotor; (c) O rings Op. 01.01.2007 Dec. 15.11.2006 - TC 0614349 BUSHES (BUSHINGS), taper lock Op. 01.01.2007 Dec. 15.11.2006 - TC 0614350

8487.90.00 8487.90.00

SEALS, OIL, having EITHER of the following: (a) bonded rubber outside diameter; or (b) leather inner sealing element impregnated with polysulphide rubber Op. 01.01.2007 Dec. 22.11.2006 - TC 0614351 SEALS, LUBRICANT, having ALL of the following: (a) single lip, OR dual opposed lip, OR dual tandem lip OR external lip; (b) shaft diameter between 6 mm and 2 300 mm (both inclusive); (c) sealing capacity at a speed of 300 m/min OR greater; (d) shaft misalignment sealing capacity in the range 0.13 mm to 3.18 mm (both inclusive) at shaft speeds in the range 150 m/min to 2 135 m/min; (e) shaft dynamic run out sealing capacity in the range 0.13 mm to 3.18 mm (both inclusive) at shaft speeds in the range 150 m/min to 2 135 m/min Op. 01.01.2007 Dec. 15.11.2006 - TC 0614352 SEALS, OIL, having BOTH of the following: (a) outside diameter of metal coated with a rubber base paint sealer; (b) synthetic rubber inner sealing element having a sealing lip and two contaminant exclusion lips Op. 01.01.2007 Dec. 15.11.2006 - TC 0614353 PARTS, ROLLING MILL OR ROUGHING MILL, being ANY of the following: (a) shaft seals or shaft seal rings; (b) plain seals Op. 31.10.2007 Dec. 29.01.2008 - TC 0718662

8487.90.00

8487.90.00

8487.90.00

Item 50 applies unless otherwise stated.

You might also like