Professional Documents
Culture Documents
https://wiki.inf.ed.ac.uk/DICE/LantronixSLCConnections
TWiki > DICE Web > InfrastructureUnit > LantronixSLCConnections (04 Sep 2012, IanDurkacz)
These notes describe how to connect a machine to a Lantronix SLC unit so that its console can be accessed using the School's conserver infrastructure.
1. Cabling
A machine's serial port should be connected to the next available device port of the appropriate SLC using a standard TP cable. You must use the appropriate RJ45<->DB9F adaptor at the machine end to make this connection: the Lantronix part number for the required adaptor is 200.2070A, and its pinout is documented on p233 of the SecureLinx Console Manager User Guide. Such adaptors are available in the Forum server room: we have some 'official' Lantronix adaptors (coloured grey, and labelled '200.2070A'), and also some adaptors which have been made in-house by our technicians: these are coloured green, in order to distinguish them from other 'in-house' adaptors which have been used here for console access in the past. Note that, by default, all incoming serial connections on the SLC are expected to run at 9600,8,n,1. The use of different baud rates etc. is strongly discouraged, but, if necessary, can be accommodated by appropriate reconfiguration of the SLC's device port(s): see How to set up a Lantronix SLC Console Server . The Dothill Evolution SAN boxes require a DB9M adapter, see LantronixEvolutionConfiguration for details.
1 de 2
https://wiki.inf.ed.ac.uk/DICE/LantronixSLCConnections
4. Further information
1. More information on the console command and the School's conserver set-up can be found in the local guide to using (ssh)console and conserver. 2. Information about conserver itself can be found at the conserver website. -- IanDurkacz - 01 Nov 2007
Copyright by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback This Wiki uses Cookies
2 de 2