You are on page 1of 323

Mechanical

Hangers and
Supports for
Plumbing,
HVAC and Fire
Protection

Ph: 1-800-333-0852
www.erico.com

CADDY Mechanical Hangers


and Supports for
Plumbing, HVAC and
Fire Protection

Ph: 1-800-333-0852
www.erico.com

DESIGNS
All dimensions are 5% and product design and specifications are subject to change without notice.
DESIGN AND MANUFACTURING
Supports and hangers may be manufactured in conformance with one or more of the following:
Manufacturers Standardization Society MSS-SP-58
Federal Specification WW-H-171
Factory Mutual Research Corporation
Underwriters Laboratories, Inc.
National Fire Protection Association NFPA-13 , NFPA 24
ANSI Code for Pressure Piping
TERMS AND CONDITIONS OF SALE
For ordering, terms and conditions of sale, please consult our current price guide.
WARNING
ERICO products shall be installed and used only as indicated in ERICOs product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICOs
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of
shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE
SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities
ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products.
All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport.
Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance
with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection.
Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no
event be responsible if the products have not been stored or used in accordance with its specifications and
recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective
products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES
BUYERS EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF
ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence
of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase
price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR
CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.
ANSI is a registered trademark of American National Standards Institute
ASTM is a registered trademark of ASTM International
UL is a is a registered trademark of Underwriters Laboratories, Inc.
ASME is a is a registered trademark of American Society of Mechanical Engineers
NFPA is a registered trademark of National Fire Protection Association

Ph: 1-800-333-0852
www.erico.com

TABLE OF CONTENTS
Product Picture Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages I-XXVI
1 Clevis Hangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
2 Split Ring Hangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13
3 Loop Hangers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
4 Riser Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31
5 Pipe Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 43
6 Universal Support System - CADDY SPEED LINK. . . . . . . . . . Page 65
7 Pipe and Equipment Supports - CADDY PYRAMID . . . . . . . . Page 69
8 Perforated Pipe Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 73
9 Strut Pipe Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 77
10 CPVC Pipe Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 89
11 Beam Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 93
12 Structural Attachments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 119
13 Supports, Guides & Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . Page 139
14 Shields & Saddles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 161
15 Strut, Fittings & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . Page 173
16 Stainless Steel Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 215
17 Rods, Plates & Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 223
18 Slotted Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 245
19 Sway Bracing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 249
20 Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 255

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

NEW

Page 4

Page 5

Page 6

401

CADDY SLOT LOCK

410

Page 7

Page 8

Page 9

402

420

401RO

Page 10

Page 11

403

405

Ph: 1-800-333-0852
www.erico.com

SPLIT RING HANGERS

NEW

NEW

Page 14

Page 15

Page 15

CADDY SUPERFIX 454

BH

111

Page 16

Page 17

455

456

LOOP HANGERS

3
NEW

NEW

Page 20

Page 21

Page 21

100

LHSR6

115

Page 22

Page 23

Page 24

101

100FL

102

Ph: 1-800-333-0852
www.erico.com

II

LOOP HANGERS

Page 25

Page 26

Page 27

102A

103

104

Page 27

Page 28

Page 29

VTR

418

418FL

RISER CLAMPS

NEW

Page 32

Page 33

Page 34

CADDY EZ RISER

510RO

511

Page 35

Page 36

Page 37

520

450

451

III

Ph: 1-800-333-0852
www.erico.com

RISER CLAMPS

Page 38

Page 39

Page 40

452

453

700

Page 41

Page 42

Page 42

705

517

516

PIPE FIXINGS

Page 45

Page 45

Page 46

007

STR

008

Page 47

Page 47

Page 48

STR2

470

008CP

Ph: 1-800-333-0852
www.erico.com

IV

PIPE FIXINGS

5
NEW

Page 49

Page 50

Page 51

008CU

135 U-Hanger

DWV

NEW

NEW

NEW

Page 52

Page 53

Page 54

WH

TPC

CADDY SUPERKLIP

Page 55

Page 55

Page 55

SMS8

SGB

TSGB

Page 56

Page 57

Page 57

150M

M-Series

MCP-Series

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

Page 58

Page 59

Page 60

M-Series

MCP-Series

CD-Series

Page 61

Page 62

Page 63

CDCP-Series

801

800

Page 64

Page 64

802

EPS

UNIVERSAL SUPPORT SYSTEM


CADDY SPEED LINK
NEW

NEW

Page 66

Page 67

Page 68

CADDY SPEED LINK

CADDY SPEED LINK LD

SLADCP

Ph: 1-800-333-0852
www.erico.com

VI

UNIVERSAL SUPPORT SYSTEM

CADDY SPEED LINK

Page 68

Page 68

Page 68

SLADS

SLWC

SLWPT

Page 68

SLEB

PIPE & EQUIPMENT SUPPORTS

CADDY PYRAMID
NEW

NEW

NEW

Page 70

Page 71

CADDY PYRAMID 25

CADDY PYRAMID 50

VII

Page 72

CADDY PYRAMID 150


CADDY PYRAMID 300
CADDY PYRAMID 600

Ph: 1-800-333-0852
www.erico.com

PERFORATED PIPE STRAPS

Page 74

Page 74

Page 75

009EG

009CP

009CU

Page 75

Page 76

MSR

MSS

STRUT PIPE CLAMPS

NEW

Page 78

Page 79

Page 80

RIGD

OD

PCC

Page 81

Page 82

Page 82

TCC

COPC

EMTC

Ph: 1-800-333-0852
www.erico.com

VIII

STRUT PIPE CLAMPS

9
NEW

NEW

NEW

Page 83

Page 83

Page 84

TSM

TSMI

SCH

Page 85

Page 86

Page 86

SK

STR

STR2

Page 87

Page 87

UNIV

VS-20

NEW

IX

Ph: 1-800-333-0852
www.erico.com

CPVC PIPE FIXINGS

10

Page 90

Page 90

Page 91

107

108

109

NEW

Page 91

SO

BEAM CLAMPS

11

Page 95

Page 96

Page 97

280

300

310

Page 98

Page 99

Page 100

255

255L

BC26

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

Page 101

Page 102

Page 103

200

200RS

547/548

Page 104

Page 105

Page 106

PH

PHSW

BC13

RS

Page 107

Page 108

Page 109

BC14

BC10

BC15

Page 109

Page 110

Page 111

BC09

315

PAR

XI

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

Page 111

Page 112

Page 113

ET

RA

300C

Page 114

Page 114

Page 115

35RS

34SL

255C

Page 115

Page 116

Page 117

356

360

361

Page 118

363

Ph: 1-800-333-0852
www.erico.com

XII

STRUCTURAL ATTACHMENTS

Page 121

Page 121

Page 122

365M

365

355

Page 123

Page 124

Page 125

355N

370A

37

Page 126

Page 127

Page 128

38

325

326

Page 129

Page 130

Page 131

327

328

319

XIII

12

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

Page 131

Page 132

Page 133

340

320L / 320W

348

Page 134

Page 134

Page 135

350

351

352

Page 136

Page 137

Page 137

353

4TI / 6TI

AF

Page 138

Page 138

VF

VAFT

Ph: 1-800-333-0852
www.erico.com

XIV

12

SUPPORTS, GUIDES & ROLLERS 13

Page 141

Page 142

Page 143

605

610

615

RS

Page 144

Page 145

Page 146

617

619

620

Page 147-149

Page 147-149

Page 150

ROL12

ROL13

ROL14

Page 151

Page 152-153

Page 154-155

ROL15

650

651

XV

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13

Page 156

Page 157

Page 158

721

722

723

Page 159

724

SHIELDS & SADDLES

14

Page 162

Page 163

Page 164

125

121

126

Page 165

Page 166

Page 167

127

630

631

Ph: 1-800-333-0852
www.erico.com

XVI

SHIELDS & SADDLES

14

Page 168

Page 169

Page 170

632

633

634

Page 171

635

STRUT, FITTINGS, & ACCESSORIES 15

Page 179

Page 180

Page 180

A12

A14

B12

Page 181

Page 182

Page 182

C12

C14

D12

XVII

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


NEW

Page 183

Page 183

Page 184

E12

CONC

CADDY SLICK

Page 185

Page 186

Page 186

STS

NUT

NUTC

Page 187

Page 187

Page 188

SPRA

SPRC

SPRD

Page 188

Page 189

Page 190

SPRM

TSNT

SQNT

N EW

NEW

Page 190

Page 191

Page 192

VS

STCB

BC16

Ph: 1-800-333-0852
www.erico.com

XVIII

STRUT, FITTINGS, & ACCESSORIES 15

Page 192

Page 193

Page 193

BC17

BR22

Strut Cover

Page 194

Page 194

Page 195

ENDC

F09

F10-F12

Page 195

Page 196

Page 196

F13-F18

F20

F22

Page 197

Page 197

Page 198

F23

F25

F36

XIX

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15

Page 198

Page 199

Page 199

F37

L10

L11

Page 200

Page 200

Page 201

L12

L15

L16-L17

Page 201

Page 202

Page 202

L18

L19-L20

L22

Page 203

Page 203

Page 204

L23

L24

L25

Page 204

Page 205

Page 205

L26

L27

L44

Ph: 1-800-333-0852
www.erico.com

XX

STRUT, FITTINGS, & ACCESSORIES 15

Page 206

Page 206

Page 207

L46

L47

P09

Page 207

Page 208

Page 208

P10

P11

P13

Page 209

Page 209

Page 210

ROL10

ROL11

U10A

Page 210

Page 211

Page 211

U24

W10

W12

XXI

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15

Page 212

Page 212

Page 213

W13

W17

W18

Page 213

Page 214

Page 214

W19

W20

W23

STAINLESS STEEL PRODUCTS

Page 216

Page 217

Page 218

105

406

305

Page 219

Page 220

Page 221

150

OD

RIGD

Ph: 1-800-333-0852
www.erico.com

XXII

16

RODS, PLATES & HARDWARE

Page 226

Page 226

Page 227

304B2

005

10

Page 227

Page 228

Page 228

10H

11

12

Page 229

Page 230

Page 230

50

51

25

Page 231

Page 231

Page 232

25S

25R

41

XXIII

17

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

Page 232

Page 233

Page 233

42

43

100A

Page 233

Page 234

Page 235

145

Hardware Anchors HMZ

345R

Page 235

Page 236

Page 236

RAWL

26

30

Page 237

Page 237

Page 238

31

SWF

35

Page 238

Page 239

Page 239

SWFF

40

SWM

Ph: 1-800-333-0852
www.erico.com

XXIV

17

RODS, PLATES & HARDWARE

Page 240

Page 240

Page 241

47

SWMF

HSCR

Page 241

Page 242

Page 242

85

80

15

Page 243

Page 243

Page 244

740

4H

ESGP

17

Page 244

MSP

XXV

Ph: 1-800-333-0852
www.erico.com

SLOTTED ANGLE

18

Page 246

Page 246

Page 247

SAA

SAD

SAE

SWAY BRACING

19

Page 250

Page 251

Page 251

TP220

TP225

TP225A

Page 252

Page 253

Page 253

TP230

TP235

TP240

Page 254

TP280

Ph: 1-800-333-0852
www.erico.com

XXVI

XXVII

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

NEW

Page 4

Page 5

Page 6

401

CADDY SLOT LOCK

410

Page 7

Page 8

Page 9

402

420

401RO

Page 10

Page 11

403

405

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

CLEVIS HANGER 401


Standard Duty
Size Range: 1/2 through 24
Surface Finish: Electro-zinc plated
Recommended for the suspension of
stationary non-insulated pipe lines
Standard electro-zinc plated finish is
cleaner, provides superior corrosion
protection

RS

Conforms with Federal Specification


WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)

B
A

2-1/2 - 8

Part
Number

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

4010050EG
4010075EG
4010100EG
4010125EG
4010150EG
4010200EG
4010250EG
4010300EG
4010350EG
4010400EG
4010500EG
4010600EG
4010800EG
4011000EG
4011200EG
4011400EG
4011600EG
4011800EG
4012000EG
4012400EG

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"

3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1
1
1-1/8
1-1/4
1-1/4

2-1/8"
2-3/8"
2-3/4"
3-5/16"
3-15/16"
4-1/2"
5-1/4"
6"
6-1/2"
7-3/4"
9-3/4"
11-3/4"
14"
16-1/2"
18-5/8"
21-3/4"
24"
26-3/4"
30"
34-1/8"

1-5/8"
1-3/4"
2-1/16"
2-3/8"
2-15/16"
3-1/4"
3-3/4"
4-1/8"
4-7/16"
5-3/8"
6-13/16"
8-1/4"
9-1/2"
10-7/8"
12"
14-1/2"
15-3/4"
17-1/2"
19-5/8"
21-3/4"

610
610
610
610
610
610
1130
1130
1130
1130
1430
1940
2000
3600
3800
4200
4600
4800
4800
4800

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS
CADDY SLOT LOCK
Standard Duty

NEW

Size Range: 2 and 4


Surface Finish: Electro-zinc plated
Slotted crossbeam design is easier
to assemble than conventional nut
and bolt style clevis hangers
Eliminates the need to install
additional parts to control deflection
Recommended for the suspension of
stationary non-insulated pipe lines
Standard electro-zinc plated finish is cleaner,
provides superior corrosion protection

Conforms with Federal Specification


WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)

Patent Pending
Part
Number

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

4270200EG

2"

3/8

4-11/16

3-3/8"

610

4270400EG

4"

5/8

7-3/4

5-3/8

1130

Features
UL Listed and FM approved
Each assembly comes individually bagged, ready to assemble
Patent-pending slotted crossbeam design is easier and faster to
assemble than conventional nut and bolt style hangers
Notches in the crossbeam capture the top and bottom legs under load,
minimizing deflection
Meets FM deflection requirements without the need to install
additional parts
Has successfully passed the rigorous vibration testing requirements
for both UL and FM
The CADDY SLOT LOCK Hanger is UL Listed
under UL 203 for fire protection applications

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

CLEVIS HANGER 410


Light Duty
Size Range: 1/2 through 8
Surface Finish: Electro-zinc plated
Recommended for the suspension
of light stationary non-insulated
pipe or conduit lines
Conforms with Federal Specification
WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)

RS

Standard electro-zinc plated finish is


cleaner, provides superior corrosion
protection

B
A

3/4 - 8

Part
Number
4100050EG
4100075EG
4100100EG
4100125EG
4100150EG
4100200EG
4100250EG
4100300EG
4100350EG
4100400EG
4100500EG
4100600EG
4100800EG

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"

3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4

2-1/8"
2-3/8"
2-3/4"
3-5/16"
4"
4-1/2"
5-1/4"
6"
6-1/2"
7-3/4"
9-3/4"
11-3/4"
14"

1-5/8"
1-3/4"
2-1/16"
2-3/8"
2-15/16"
3-3/16"
3-11/16"
4-3/16"
4-3/8"
5-3/8"
6-13/16"
8-1/4"
9-1/2"

150
150
250
250
250
250
350
350
400
500
600
800
1200

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

CLEVIS HANGER 402


Light Duty for Copper Tubing
Size Range: 1/2 through 8
Surface Finish: Copper-colored
coating (for identification
purposes only)
Recommended for the suspension
of stationary non-insulated copper
tubing lines
Conforms with Federal Specification
WW-H-171 (Type 12), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)

RS

B
A

Part
Number
4020050CP
4020075CP
4020100CP
4020125CP
4020150CP
4020200CP
4020250CP
4020300CP
4020350CP
4020400CP
4020500CP
4020600CP
4020800CP

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"

3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
3/4

2-1/16
2-5/16
3
2-3/4
3-5/16
4-1/16
4-13/16
5-1/2
6-1/8
6-3/4
9-1/8
11-1/16
14-7/8

1-11/16
1-13/16
2-3/8
2
2-7/16
2-7/8
3-5/16
3-3/4
4-1/8
4-1/2
6-3/8
7-7/8
10-9/16

215
215
215
215
215
215
250
300
360
440
600
760
1160

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

CLEVIS HANGER 420


Standard Duty Epoxy Coated
Size Range: 1/2 through 8
Surface Finish: Epoxy Coated
Recommended for the suspension
of stationary non-insulated pipe lines
where it is undesirable to have the
steel of the hanger in direct contact
with the pipe
Conforms with Federal Specification
WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)

RS

B
A

2-1/2 - 8

Part
Number
4200050EP
4200075EP
4200100EP
4200125EP
4200150EP
4200200EP
4200250EP
4200300EP
4200400EP
4200500EP
4200600EP
4200800EP

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"

3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2

2-1/8"
2-3/8"
2-3/4"
3-5/16"
3-15/16"
4-1/2"
5-1/4"
6"
7-3/4"
9-3/4"
11-3/4"
14"

1-5/8"
1-3/4"
2-1/16"
2-3/8"
2-15/16"
3-1/4"
3-3/4"
4-1/8"
5-3/8"
6-13/16"
8-1/4"
9-1/2"

610
610
610
610
610
610
1130
1130
1130
1430
1940
2000

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

CLEVIS HANGER 401RO


Standard Duty
Size Range: 1/2 through 24
Surface Finish: Red-oxide primer
coating
Recommended for the suspension
of stationary non-insulated pipe lines
Conforms with Federal Specification
WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)

RS

B
A

2-1/2 - 8

Part
Number
4010050RO
4010075RO
4010100RO
4010125RO
4010150RO
4010200RO
4010250RO
4010300RO
4010350RO
4010400RO
4010500RO
4010600RO
4010800RO
4011000RO
4011200RO
4011400RO
4011600RO
4011800RO
4012000RO
4012400RO

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"

3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1
1
1-1/8
1-1/4
1-1/4

2-1/8"
2-3/8"
2-3/4"
3-5/16"
3-15/16"
4-1/2"
5-1/4"
6"
6-1/2"
7-3/4"
9-3/4"
11-3/4"
14"
16-1/2"
18-5/8"
21-3/4"
24"
26-3/4"
30"
34-1/8"

1-5/8"
1-3/4"
2-1/16"
2-3/8"
2-15/16"
3-1/4"
3-3/4"
4-1/8"
4-7/16"
5-3/8"
6-13/16"
8-1/4"
9-1/2"
10-7/8"
12"
14-1/2"
15-3/4"
17-1/2"
19-5/8"
21-3/4"

610
610
610
610
610
610
1130
1130
1130
1130
1430
1940
2000
3600
3800
4200
4600
4800
4800
4800

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

CLEVIS HANGER 403


Standard Duty with
Insulation Shield
Size Range: 1-1/2 through 22
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary non-insulated pipe lines
Conforms with Federal Specification
WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)
NOTE: Please see page 268
Flared edges on
for sizing chart

RS
B

shield sizes thru


4 only
C
A

Part
Number
4030150EG
4030200EG
4030250EG
4030300EG
4030350EG
4030400EG
4030450EG
4030500EG
4030600EG
4030700EG
4030800EG
4030900EG
4031000EG
4031100EG
4031200EG
4031400EG
4031500EG
4031600EG
4031700EG
4031800EG
4031900EG
4032000EG
4032100EG
4032200EG

Nominal
Pipe Size

RS

1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4-1/2"
5"
6"
7"
8"
9"
10"
11"
12"
14"
15"
16"
17"
18"
19"
20"
21"
22"

3/8
3/8
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4

5"
5-5/16"
6-3/16"
6-3/4"
7-1/4"
7-1/4"
9-9/16"
10"
11-1/16"
12-15/16"
13-13/16"
14-3/8"
16-5/16"
18-3/8"
19-5/8"
20-1/2"
20-5/8"
22-1/2"
23-3/4"
25-13/16"
27-1/2"
29"
29-1/4"
30-1/4"

10

B
3-13/16"
3-15/16"
4-7/16"
4-11/16"
4-15/16"
4-11/16"
6-7/8"
6-15/16"
7-7/16"
8-7/8"
9-5/16"
8-7/8"
10-5/16"
11-7/8"
12-5/8"
13"
12-3/8"
14"
14-3/4"
16-3/4"
17-3/4"
18-3/8"
18-1/4"
18-5/8"

Max. Rec.
Load (lbs)

3
3
4
4
4
6
6
6
6
6
6
6
6
8
8
8
8
8
10
10
10
10
10
10

610
610
1130
1130
1130
1130
1430
1430
1940
1940
2000
2000
3600
3600
3800
4200
4200
4600
4600
4800
4800
4800
4800
4800

Ph: 1-800-333-0852
www.erico.com

CLEVIS HANGERS

CLEVIS HANGER 405


Standard Duty AWWA Cast
Iron Pipe
Size Range: 3 through 14
Surface Finish: Black (Plain)
Recommended for the suspension
of stationary non-insulated cast
iron pipe lines
Conforms with Federal Specification
WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)

RS

B
A

Part
Number

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

3"
4"
6"
8"
10"
12"
14"

1/2
5/8
3/4
7/8
7/8
7/8
1

6-11/16
8-3/8
10-5/8
13-1/4
15-7/8
17-3/8
21-5/8

4-1/2"
5-11/16
7
8-3/8
10-1/8
10-1/8"
13-1/2"

1130
1430
1940
2000
3600
3800
4200

4050300PL
4050400PL
4050600PL
4050800PL
4051000PL
4051200PL
4051400PL

Ph: 1-800-333-0852
www.erico.com

11

ucts
NEW Prod
CADDY SUPERFIX 454
SPLIT RING HANGER
Recommended for the suspension
of stationary non-insulated pipe
lines
EPDM rubber insulation for sound
reduction compliant with DIN 4109
Comes with a welded 3/8 cap nut,
allowing easy attachment to
threaded rod

See page 14

Bell Hanger
Mounting screw is recessed and has
a pierce-point to penetrate metal
studs
Provides 13/16 standoff

See page 15

12

Ph: 1-800-333-0852
www.erico.com

SPLIT RING HANGERS

NEW

NEW

Page 14

Page 15

Page 15

CADDY SUPERFIX 454

BH

111

Page 16

Page 17

455

456

Ph: 1-800-333-0852
www.erico.com

13

SPLIT RING HANGERS


CADDY SUPERFIX 454
SPLIT RING HANGER

NEW

Light Duty
Size Range: 1/4 through 4
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary non-insulated pipe lines
EPDM rubber insulation for sound
reduction compliant with DIN 4109

3/8

Temperature range from


-58F to 230F

Conforms with Manufacturers


Standardization Society (MSS)
SP-58 and SP-69 (Type 12)
Part
Number
454001
454002
454003
454004
454005
454006
454007
454008
454009
454010
454011
454012
454013
454014
454015
454016
454017

Nominal Pipe
A
Size
IP
CT
1/4"
3/8"
15/32 - 9/16
3/8"
1/2"
19/32 - 3/4
5/8"
19/32 - 3/4
1/2"
3/4"
13/16 - 29/32
3/4"
1"
1-1/32 1-3/32
1"
1-1/4"
1-1/4 1-3/8
1-1/4" 1-1/2" 1-9/16 1-11/16
1-1/2
1-3/4 1-15/16
2"
2-1/8 2-9/32
2"
2-1/4 2-13/32
2-1/2"
2-1/2 2-5/8
2-1/2"
2-3/4 2-7/8
3"
2-29/32 3-5/32
3"
3-9/32 3-9/16
3-1/2" 3-5/8 3-15/16
3-1/2"
4"
3-31/32 4-3/16
4"
4-1/4 4-1/2

Max. Rec.
Load (lbs)

29/32
29/32
29/32
29/32
29/32
29/32
29/32
29/32
15/16
29/32
29/32
15/16
15/16
15/16
29/32
1-1/8
1-1/8

M6x25
M6x25
M6x25
M6x25
M6x25
M6x30
M6x30
M6x30
M6x30
M6x30
M6x30
M6x30
M6x35
M6x35
M6x35
M6x35
M6x40

180
180
180
180
180
180
180
180
180
180
300
300
300
300
300
300
300

Features
Comes with a welded 3/8 cap nut, allowing easy attachment to threaded rod
Equipped with an EPDM rubber sleeve that serves to minimize noise
Has a fire rating DIN EN 13501-1:E

14

Ph: 1-800-333-0852
www.erico.com

SPLIT RING HANGERS

BELL HANGER BH

NEW

Light Duty
Size Range: 1/2 through 1
Surface Finish: Copper plated
Provides 13/16 standoff
Mounting screw is recessed and has a
pierce-point to penetrate metal studs
Part
Number
BH0050CP
BH0075CP
BH0100CP

Nominal
Pipe Size
1/2
3/4"
1"

SPLIT RING HANGER 111


Malleable Iron Swivel Split Ring
Size Range: 3/4 through 6
Surface Finish: Black
Recommended for the suspension of
stationary non-insulated pipe lines
Conforms with Federal Specification
WW-H-171 (Type 6), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 6)
Offset hinge design allows for installation
or removal of pipe after the hanger is installed
Swivel insert allows for vertical adjustment
during installation
Locking clip allows for arm to be opened
and closed without the use of tools
Max. temperature service 450F
Locking clip and rivet are carbon steel
Part
Number
1110075PL
1110100PL
1110125PL
1110150PL
1110200PL
1110250PL
1110300PL
1110350PL
1110400PL
1110500PL
1110600PL

RS

B
A

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"

3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"

3
3-1/4
3-1/2
3-7/8
4-1/2
6-3/8
7
7-7/8
9-1/8
10-3/4
12

1-5/16
1-5/16
1-5/16
1-5/16
1-5/16
2-1/4
2-1/4
2-1/4
3-1/8
3-1/8
3-3/8

300
300
300
300
300
500
500
500
900
900
1300

Ph: 1-800-333-0852
www.erico.com

15

SPLIT RING HANGERS

SPLIT RING HANGER 455


Malleable Iron Split Ring
Stand-Off Hanger
Size Range: 3/8 through 4
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary non-insulated pipe lines
Allows for piping runs close to
ceiling or walls

RS

Conforms with Federal Specification


WW-H-171 (Type 25), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 12)

B
A

Bolt and rivet are carbon steel

Part
Number

Nominal
Pipe Size

Plain Finish
4550037PL
3/8"
4550050PL
1/2"
4550075PL
3/4"
4550100PL
1"
4550125PL
1-1/4"
4550150PL
1-1/2"
4550200PL
2"
4550250PL
2-1/2"
4550300PL
3"
4550400PL
4"
Electro-zinc Plated Finish
4550037EG
3/8"
4550050EG
1/2"
4550075EG
3/4"
4550100EG
1"
4550125EG
1-1/4"
4550150EG
1-1/2"
4550200EG
2"
4550250EG
2-1/2"
4550300EG
3"
4550400EG
4"

RS

Max. Rec.
Load (lbs)

3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2

1-5/16
1-1/2
1-3/4
2
2-3/8
2-5/8
3-1/8
3-3/4
4-3/8
5-3/8

3/8
3/8
7/16
7/16
1/2
1/2
1/2
5/8
5/8
11/16

180
180
180
180
180
180
180
300
300
300

3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2

1-5/16
1-1/2
1-3/4
2
2-3/8
2-5/8
3-1/8
3-3/4
4-3/8
5-3/8

3/8
3/8
7/16
7/16
1/2
1/2
1/2
5/8
5/8
11/16

180
180
180
180
180
180
180
300
300
300

16

Ph: 1-800-333-0852
www.erico.com

SPLIT RING HANGERS

SPLIT RING HANGER 456


Malleable Iron Split Ring Standoff Hanger for Copper Tubing
Size Range: 3/8 through 3
Surface Finish: Copper-colored
coating (for identification purposes
only)
Recommended for the suspension
of stationary non-insulated copper
tubing lines

RS

Allows for piping runs close to ceiling


or walls

Conforms with Federal Specification


WW-H-171 (Type 25), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 12)

Bolt and rivet are carbon steel


Part
Number
4560037CP
4560050CP
4560075CP
4560100CP
4560125CP
4560150CP
4560200CP
4560250CP
4560300CP

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

3/8"
1/2
3/4
1"
1-1/4
1-1/2
2"
2-1/2"
3"

3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2

15/16
1-1/8
1-3/8
1-5/8
1-7/8
2-1/8
2-5/8
3-3/8
3-7/8

5/16
3/8
3/8
3/8
3/8
3/8
3/8
5/8
5/8

180
180
180
180
180
180
180
180
180

Ph: 1-800-333-0852
www.erico.com

17

ucts
NEW Prod
SWIVEL LOOP
HANGER 100
Recommended for the suspension
of stationary non-insulated pipe
lines
Features a retained insert nut to
ensure that the loop hanger and
insert nut stay together

See page 20

LOOP HANGER SURGE


RESTRAINT LHSR6
Grips the loop hanger not the
nut allowing fine tuning for
height adjustment
Installs without tools
Restricts the upward surge
movement of activated fire
sprinkler systems

See page 21

18

Ph: 1-800-333-0852
www.erico.com

LOOP HANGERS

3
NEW

NEW

Page 20

Page 21

Page 21

100

LHSR6

115

Page 22

Page 23

Page 24

101

100FL

102

Page 25

Page 26

Page 27

102A

103

104

Page 27

Page 28

Page 29

VTR

418

418FL

Ph: 1-800-333-0852
www.erico.com

19

LOOP HANGERS

SWIVEL LOOP HANGER 100


Heavy Duty Adjustable
Band Hanger
Size Range: 1/2 through 8

NEW

Surface Finish: Electro-zinc plated


Recommended for the suspension
of stationary non-insulated pipe lines
Features a retained insert nut to
ensure that the loop hanger and
insert nut stay together
Conforms with Federal Specification
WW-H-171 (Type 10), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 10)

Part
Number
1000050EG
1000075EG
1000100EG
1000125EG
1000150EG
1000200EG
1000250EG
1000300EG
1000350EG
1000400EG
1000500EG
1000600EG
1000800EG

3/4 - 8

1/2 - 8

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"

3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
7/8

2-3/4
3-1/16
3-5/16
3-9/16
3-13/16
4-1/4
5-5/8
6-9/16
7
7-3/4
9-1/8
10-5/8
13-1/8

1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-5/16
1-5/16
1-9/16
1-5/8

300
300
300
300
300
300
1000
1000
1000
1100
1100
1250
1250

RS

20

Ph: 1-800-333-0852
www.erico.com

LOOP HANGERS

LOOP HANGER SURGE


RESTRAINT LHSR6

NEW

Heavy Duty Adjustable


Band Hanger
Size Range: fits 1/2 through 2
model 100 loop hangers

Surface Finish: CADDY COAT Black


Restricts the upward surge
movement of activated fire
sprinkler systems
Meets NFPA 13 requirements
One size fits 1/2 thru 2 sizes of
the model 100 loop hanger
Grips the loop hanger not the
nut allowing fine tuning for
height adjustment
Installs without tools

SWIVEL LOOP HANGER 115


Adjustable Band Hanger with
NFPA Rod Sizes
Size Range: 2-1/2 through 8
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary non-insulated pipe lines
Manufactured to use the minimum
rod size permitted by NFPA for fire
sprinkler piping

RS

Conforms with Federal Specification


WW-H-171 (Type 10), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 10)

Part
Number
1150250EG
1150300EG
1150350EG
1150400EG
1150500EG
1150600EG
1150800EG

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

2-1/2"
3"
3-1/2"
4"
5"
6"
8"

3/8
3/8
3/8
3/8
1/2
1/2
1/2

5-9/16
6-9/16
7-1/16
7-9/16
9-3/16
11-5/16
12-7/8

1
1
1
1
1-1/4
1-1/4
1-1/4

525
525
585
650
1000
1000
1000

Ph: 1-800-333-0852
www.erico.com

21

LOOP HANGERS

SWIVEL LOOP HANGER 101


Adjustable Band Hanger for
Copper Tubing
Size Range: 1/2 through 6
Surface Finish: Copper-colored coating
(for identification purposes only)
Recommended for the suspension
of stationary non-insulated copper
tubing lines
Conforms with Federal Specification
WW-H-171 (Type 10), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 10)
Part
Number
1010050CP
1010075CP
1010100CP
1010125CP
1010150CP
1010200CP
1010250CP
1010300CP
1010350CP
1010400CP
1010500CP
1010600CP

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"

3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8"
3/4"

3-3/16
3-1/8
3-1/8
3-3/16
3-5/8
3-13/16
4-7/16
5-11/16
6-7/16
7-1/8
9-1/4
11-3/16

1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-5/16
1-9/16

180
180
180
180
180
180
200
250
300
360
480
630

RS

22

Ph: 1-800-333-0852
www.erico.com

LOOP HANGERS

SWIVEL LOOP
HANGER 100FL
Felt-lined Adjustable Band Hanger
Size Range: 1/2 through 4
Surface Finish: Electro-zinc plated
Recommended for the suspension of
stationary non-insulated copper tubing
lines to prevent electrolysis
Felt lining also acts to reduce noise
in pipes

3/4 - 8

1/2 - 8

Conforms with Federal Specification


WW-H-171 (Type 10), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 10)
Part
Number
1000050FL
1000075FL
1000100FL
1000125FL
1000150FL
1000200FL
1000250FL
1000300FL
1000350FL
1000400FL

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"

3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"

2-3/4
3-1/16
3-5/16
3-9/16
3-13/16
4-1/4
5-5/8
6-9/16
7
7-3/4

1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-5/16

300
300
300
300
300
300
1000
1000
1000
1100

RS

Ph: 1-800-333-0852
www.erico.com

23

LOOP HANGERS

SWIVEL LOOP HANGER 102


PVC Coated Adjustable
Band Hanger
Size Range: 1/2 through 8
Surface Finish: Electro-zinc plated
with a vinyl top coat
Recommended for the suspension
of stationary non-insulated pipe lines
Conforms with Federal Specification
WW-H-171 (Type 10), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 10)
Part
Number
1020050VC
1020075VC
1020100VC
1020125VC
1020150VC
1020200VC
1020250VC
1020300VC
1020350VC
1020400VC
1020500VC
1020600VC
1020800VC

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"

3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
7/8"

3-1/8
3-1/16
3-3/16
3-1/2
3-15/16
4-1/2
5-5/8
6-9/16
7
7-3/4
9-1/8
10-5/8
13-1/8

1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-5/16
1-5/16
1-9/16
1-5/8

300
300
300
300
300
300
1000
1000
1000
1100
1100
1250
1250

RS

24

Ph: 1-800-333-0852
www.erico.com

LOOP HANGERS

SWIVEL LOOP HANGER 102A


PVC Coated Adjustable Band
Hanger for Copper Tubing
Size Range: 1/2 through 6
Surface Finish: Copper colored coating
with a vinyl top coat
Recommended for the suspension
of stationary non-insulated copper
tubing lines where it is undesirable
to have the steel of the hanger in
direct contact with the copper tubing
Conforms with Federal Specification
WW-H-171 (Type 10), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 10)
Part
Number

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

102A0050VC
102A0075VC
102A0100VC
102A0125VC
102A0150VC
102A0200VC
102A0250VC
102A0300VC
102A0350VC
102A0400VC
102A0500VC
102A0600VC

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"

3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
3/4"

3-3/16
3-1/8
3-1/8
3-3/16
3-5/8
3-13/16
4-7/16
5-11/16
6-7/16
7-1/8
9-1/4
11-3/16

1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-5/16
1-9/16

180
180
180
180
180
180
200
250
300
360
480
630

RS

Ph: 1-800-333-0852
www.erico.com

25

LOOP HANGERS

SWIVEL LOOP HANGER 103


Adjustable Band Hanger with
Insulation Shield
Size Range: 1-1/2 through 6
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary low or high temperature
piping where crush resistant material
is installed at the point of support
Protection shield is welded to loop
before plating
Flared edges on sizes through 4 only
For sizes larger than 6 see Model 403
Clevis Hanger
NOTE: Please see page 268 for sizing chart
Part
Number

Nominal
Pipe Size

RS

1030150EG
1030200EG
1030250EG
1030300EG
1030350EG
1030400EG
1030500EG
1030600EG

1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"

3/8"
3/8
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"

A
3-13/16
4-1/4
5-5/8
6-9/16
7
7-3/4
9-1/8
10-5/8

Max. Rec.
Load (lbs)

1
1
1-1/4
1-1/4
1-1/4
1-5/16
1-5/16
1-9/16

3
3
4
4
4
6
6
6

300
300
1000
1000
1000
1100
1100
1250

RS
B

A
C

Flared edges on sizes


thru 4 only.
Insulation not included.

26

Ph: 1-800-333-0852
www.erico.com

LOOP HANGERS

SWIVEL LOOP HANGER 104


Adjustable Band Hanger for
Plastic Pipe
Size Range: 1/2 through 4
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary flexible EPDM or
Polypropylene plastic piping

RS

Use hanger with V-trough


(model VTR) for continuous support
of flexible or hot piping services

Part
Number

Size
No.

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1040100EG
1040100EG
1040100EG
1040100EG
1040100EG
1040100EG
1040200EG
1040200EG
1040200EG
1040200EG

1
1
1
1
1
1
2
2
2
2

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"

3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"

5-7/8
5-7/8
5-7/8
5-7/8
5-7/8
5-7/8
9-1/4
9-1/4
9-1/4
9-1/4

7/8
7/8
7/8
7/8
7/8
7/8
1-1/8
1-1/8
1-1/8
1-1/8

175
175
175
175
175
175
175
175
175
175

CONTINUOUS SUPPORT VTR


V-trough Support for Flexible
or Hot Piping Services
Surface Finish: Electro-zinc plated
Used with the model 104 Hanger for
continuous support of flexible or hot
piping services
#104

Part
Number
VTR#11000
VTR#21000

Nominal
Pipe Size

Size

1/2 thru 2
2-1/2 thru 4

#1
#2

#VTR

10

Ph: 1-800-333-0852
www.erico.com

27

.0'

V-T

RO

UG

LOOP HANGERS

J-HANGER 418
Galvanized J-hanger
Size Range: 1/2 through 8
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary non-insulated pipe lines
T-slot hole for bolt head permits
disengagement of side bolt without
removing the nut (sizes 1/2
thru 4 only)

RS

Side hole permits wall mounting


(sizes 1/2 thru 4 only)
Conforms Manufacturers
Standardization Society (MSS)
SP-58 and SP-69 (Type 5)

Part
Number
4180050EG
4180075EG
4180100EG
4180125EG
4180150EG
4180200EG
4180250EG
4180300EG
4180350EG
4180400EG
4180500EG
4180600EG
4180800EG

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"

3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
3/4"

3
3-3/8
3-11/16
4-1/2
4-13/16
5-11/16
6-3/4
7-11/16
8-3/8
9-3/16
10
11-5/8
14-1/16

9/16
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
13/16
13/16
15/16
1-1/16

400
400
400
400
400
400
800
800
800
800
800
1000
1200

28

Ph: 1-800-333-0852
www.erico.com

LOOP HANGERS

J-HANGER 418FL
Galvanized Felt-lined J-hanger
Size Range: 1/2 through 4
Surface Finish: Electro-zinc plated
Recommended for the suspension
of stationary non-insulated pipe lines
Felt lining also acts to reduce noise
in pipes

T-slot hole for bolt head permits


disengagement of side bolt without
removing the nut

RS

Side hole permits wall mounting


Conforms Manufacturers
Standardization Society (MSS)
SP-58 and SP-69 (Type 5)

Part
Number
4180050FL
4180075FL
4180100FL
4180125FL
4180150FL
4180200FL
4180250FL
4180300FL
4180350FL
4180400FL

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"

3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
5/8"

3
3-3/8
3-11/16
4-1/2
4-13/16
5-1/16
6-3/4
7-11/16
8-9/16
9-3/16

9/16
9/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
13/16

400
400
400
400
400
400
800
800
800
800

Ph: 1-800-333-0852
www.erico.com

29

ucts
NEW Prod
CADDY EZ RISER
Recommended for suspending
vertical steel pipe risers
Slotted holes make assembly a
snap no fumbling with loose
hardware
Bolts are accessible from the front,
serrated washer head design means
no wrench required on back side
for tightening

See page 32

30

Ph: 1-800-333-0852
www.erico.com

RISER CLAMPS

NEW

Page 32

Page 33

Page 34

CADDY EZ RISER

510RO

511

Page 35

Page 36

Page 37

520

450

451

Page 38

Page 39

Page 40

452

453

700

Page 41

Page 42

Page 42

705

517

516

Ph: 1-800-333-0852
www.erico.com

31

RISER CLAMPS

CADDY EZ RISER

NEW

Vertical Pipe Support


Size Range: 1/2 through 24
Surface Finish: Electro-zinc plated
Recommended for suspending
vertical steel pipe risers
Slotted holes make assembly a snap
no fumbling with loose hardware*

Bolts are accessible from the front,


serrated washer head design means no
wrench required on back side for tightening*

2 - 8

Standard electro-zinc plated finish is


cleaner, provides superior corrosion protection
Conforms with Federal Specification
WW-H-171 (Type 8), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 8)
NOTE: Clamp is fitted for steel pipe and

should be installed below a coupling or shear


lug, with bolts torqued to recommended value
*1/2 - 12 only
Part
Number
5100050EG
5100075EG
5100100EG
5100125EG
5100150EG
5100200EG
5100250EG
5100300EG
5100350EG
5100400EG
5100500EG
5100600EG
5100800EG
5101000EG
5101200EG
5101400EG
5101600EG
5101800EG
5102000EG
5102400EG

Nominal
Pipe Size

HS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"

8-1/2"
9"
9"
9-7/16"
9-7/8"
10-1/4"
11"
11-3/4"
12-5/8"
13"
14-1/2"
16"
18-1/4"
20-5/8"
22-3/8"
24-1/8"
27-7/8"
29-13/16"
32-1/4"
36-1/8"

1
1
1
1
1
1-3/16
1-3/16
1-3/16
1-3/16
1-1/2
1-1/2
2
2
2
2
2
2-1/2
2-1/2
2-1/2
3

7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
11/16
13/16
13/16
13/16
15/16

255
255
255
255
255
255
390
530
670
810
1160
1570
2500
2500
2700
2700
2900
2900
2900
2900
HS

B
A

32

Ph: 1-800-333-0852
www.erico.com

RISER CLAMPS

RISER CLAMP 510RO


Vertical Pipe Support with
Red Oxide Coating
Size Range: 1/2 through 12
Surface Finish: Red-oxide
primer coating
Recommended for suspending
vertical steel pipe risers
Conforms with Federal Specification
WW-H-171 (Type 8), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 8)
NOTE: Clamp is fitted for steel pipe and should be installed
below a coupling or shear lug, with bolts torqued to
recommended value
Part
Number
5100050RO
5100075RO
5100100RO
5100125RO
5100150RO
5100200RO
5100250RO
5100300RO
5100350RO
5100400RO
5100500RO
5100600RO
5100800RO
5101000RO
5101200RO

Nominal
Pipe Size

HS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"
10"
12"

8-1/2"
9"
9"
9-7/16"
9-7/8"
10-1/4"
11"
11-3/4"
12-5/8"
13"
14-1/2"
16"
18-1/4"
20-5/8"
22-3/8"

1
1
1
1
1
1-3/16
1-3/16
1-3/16
1-3/16
1-1/2
1-1/2
2
2
2
2

7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16

255
255
255
255
255
255
390
530
670
810
1160
1570
2500
2500
2700

HS
B
A

Ph: 1-800-333-0852
www.erico.com

33

RISER CLAMPS

RISER CLAMP 511


Vertical Support for
Copper Tubing
Size Range: 1/2 through 6
Surface Finish: Copper-colored coating
(for identification purposes only)
Recommended for suspending vertical
type K or L copper tubing risers
Conforms with Federal Specification
WW-H-171 (Type 8), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 8)

2 - 6

NOTE: Clamp is fitted for steel pipe and should be installed


below a coupling or shear lug, with bolts torqued to
recommended value
Part
Number
5110050CP
5110075CP
5110100CP
5110125CP
5110150CP
5110200CP
5110250CP
5110300CP
5110400CP
5110500CP
5110600CP

Nominal
Pipe Size

HS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"

8-1/2"
9-1/4"
9-1/4"
9-1/2"
9-1/2"
10-3/8"
11"
12"
12-1/2"
14-5/8"
15"

1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/2
2

7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
7/16
9/16
9/16

75
75
120
150
150
150
300
300
300
500
600

HS
B
A

34

Ph: 1-800-333-0852
www.erico.com

RISER CLAMPS

RISER CLAMP 520


Vertical Pipe Support with
Epoxy Coating
Size Range: 1/2 through 8
Surface Finish: Epoxy Coated
Recommended for suspending
vertical steel pipe risers where it is
undesirable to have the steel of
the hanger in direct contact with
the pipe
Conforms with Federal Specification
WW-H-171 (Type 8), Manufacturers
Standardization Society (MSS)
SP-58 and SP-69 (Type 8)
NOTE: Clamp is fitted for steel pipe and should be installed
below a coupling or shear lug, with bolts torqued to
recommended value
Part
Number
5200050EP
5200075EP
5200100EP
5200125EP
5200150EP
5200200EP
5200250EP
5200300EP
5200400EP
5200500EP
5200600EP
5200800EP

Nominal
Pipe Size

HS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"

8-1/2"
9"
9"
9-7/16"
9-7/8"
10-1/4"
11"
11-3/4"
13"
14-1/2"
16"
18-1/4"

1"
1"
1"
1"
1"
1-3/16"
1-3/16"
1-3/16"
1-1/2"
1-1/2"
2"
2"

7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
9/16"
9/16"
9/16"
11/16"

255
255
255
255
255
255
390
530
810
1160
1570
2500

HS
B
A

Ph: 1-800-333-0852
www.erico.com

35

RISER CLAMPS

STANDARD PIPE CLAMP 450


Standard Duty
Size Range: 1/2 through 30
Surface Finish: Black
Industrial pipe hanger for hot or
cold service where no insulation
is required
Normally used in conjunction with
a #40 Eye Rod or a #35 Forged
Steel Eye Nut
Conforms with Federal Specification
WW-H-171 (Type 4), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 4)
Part
Number
4500050PL
4500075PL
4500100PL
4500125PL
4500150PL
4500200PL
4500250PL
4500300PL
4500350PL
4500400PL
4500500PL
4500600PL
4500800PL
4501000PL
4501200PL
4501400PL
4501600PL
4501800PL
4502000PL
4502400PL
4503000PL

Nominal
Pipe Size

BS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"
30"

3-1/16"
3-5/16"
3-11/16"
3-15/16"
4-7/16"
5-3/8"
6-3/8"
7-1/8"
7-1/2"
8-3/4"
9-11/16"
11-5/8"
13-7/8"
17-1/8"
19-1/8"
21-1/4"
23-1/4"
26"
28-1/4"
33-3/4"
42"

7/16
7/16
7/16
7/16
5/8
5/8
5/8
5/8
5/8
5/8
5/8
7/8
1
1
1
1-1/8
1-1/8
1-1/4
1-3/8
1-5/8
2

5/16
5/16
5/16
5/16
5/16
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
7/8
7/8
1
1-1/8
1-1/4
1-3/4

500
500
500
500
800
1040
1040
1040
1040
1040
1040
1615
1615
2490
2490
2490
2490
3060
3060
3060
3500

BS

36

Ph: 1-800-333-0852
www.erico.com

RISER CLAMPS

STANDARD PIPE CLAMP 451


Heavy Duty
Size Range: 3 through 24
Surface Finish: Black
Industrial pipe hanger for hot or
cold service where no insulation
is required
Normally used in conjunction with
a #40 Eye Rod or a #35 Forged
Steel Eye Nut
Conforms with Federal Specification
WW-H-171 (Type 4), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 4)
Part
Number
4510300PL
4510400PL
4510500PL
4510600PL
4510800PL
4511000PL
4511200PL
4511400PL
4511600PL
4511800PL
4512000PL
4512400PL

Nominal
Pipe Size

BS

Max. Rec.
Load (lbs)

3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"

8"
9-3/4"
11"
13-1/4"
15-1/4"
18-1/8"
21-3/4"
23-3/4"
25-3/4"
38-1/2"
42-1/8"
48-1/4"

1
1
1
1-1/8
1-1/8
1-1/4
1-5/8
1-5/8
1-5/8
3
3
3-1/4

3/4
7/8
7/8
1
1
1-1/4
1-1/2
1-1/2
1-1/2
2
2
2-1/4

3370
3515
3515
4865
4865
6010
8675
9120
9120
13800
15300
16300

BS

Ph: 1-800-333-0852
www.erico.com

37

RISER CLAMPS

STANDARD PIPE CLAMP 452


Double Bolt Pipe Clamp
Size Range: 1/2 through 24
Surface Finish: Black
Industrial pipe hanger for hot
service with up to 4 of insulation
and where flexibility at rod
attachment is desired

Load bolt will extend past 4 of


insulation on pipe sizes 6 and larger

BS

Normally used in conjunction with a


#40 Eye Rod or a #35 Forged Steel
Eye Nut

Conforms with Federal Specification


WW-H-171 (Type 3), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 3)
Part
Number
4520050PL
4520075PL
4520100PL
4520125PL
4520150PL
4520200PL
4520250PL
4520300PL
4520400PL
4520500PL
4520600PL
4520800PL
4521000PL
4521200PL
4521400PL
4521600PL
4521800PL
4522000PL
4522400PL

Nominal
Pipe Size

BS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
20"
24"

4-1/2"
5-7/16"
5-1/2"
5-5/8"
7-7/8"
8-1/8"
8-3/4"
9-3/8"
12-1/8"
13-1/8"
16"
18-1/16"
20-7/8"
22-7/8"
25-5/16"
27-5/16"
29-5/16"
31-15/16"
35-15/16"

5/8"
5/8"
5/8"
5/8"
1"
1"
1"
1"
1-1/16
1-1/16
1-7/16
1-7/16
1-7/16
1-7/16
2
2
2
2
2

3/8
3/8
3/8
3/8
5/8
5/8
5/8
5/8
3/4
3/4
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2

850
850
850
850
1380
1380
1380
1380
2230
2230
2555
2555
2890
2890
3835
3835
3835
4015
4900

38

Ph: 1-800-333-0852
www.erico.com

RISER CLAMPS

STANDARD PIPE CLAMP 453


Heavy Duty Double Bolt
Pipe Clamp
Size Range: 6 through 24
Surface Finish: Black
Industrial heavy load pipe hanger
for hot service with up to 4 of
insulation and where flexibility at
rod attachment is desired
Load bolt will extend past 4 of insulation
Normally used in conjunction with a
#40 Eye Rod or a #35 Forged Steel Eye Nut
Conforms with Federal Specification
WW-H-171 (Type 3), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 3)
Part
Number
4530600PL
4530800PL
4531000PL
4531200PL
4531400PL
4531600PL
4531800PL
4532000PL
4532400PL

Nominal
Pipe Size

BS

Max. Rec.
Load (lbs)

6"
8"
10"
12"
14"
16"
18"
20"
24"

16-1/4
18-5/8
22-1/8
25-3/4
27-5/8
30-1/4
34-3/4
36-3/4
42-1/4

1-3/4
2
2-1/4
2-1/2
2-1/2
3
3-1/2
3-1/2
3-1/2

1
1-1/8
1-1/4
1-1/2
1-1/2
1-3/4
2
2
2

3125
4285
4910
6250
8485
8930
12325
13665
14555

B
BS

Ph: 1-800-333-0852
www.erico.com

39

RISER CLAMPS

STANDARD PIPE CLAMP 700


Offset Pipe Clamp
Size Range: 1/2 through 8
Surface Finish: Black
Industrial pipe hanger to support
piping away from wall or floor

Part
Number
7000050PL
7000075PL
7000100PL
7000125PL
7000150PL
7000200PL
7000250PL
7000300PL
7000400PL
7000500PL
7000600PL
7000800PL

Nominal
Pipe Size

HS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"

9-3/4
8-7/16
9-1/16"
9-3/8"
9-3/4"
10-5/8"
11-5/8"
12-7/8"
14-1/2"
15-3/4"
18-1/4"
20-5/8"

3-3/8
3-5/16
3-9/16"
3-15/16"
4-1/8"
4-5/8"
5-1/8"
5-3/4"
6-3/4"
7-13/16"
9"
11"

3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"

190
200
200
200
200
410
410
410
600
600
850
850

HS

40

Ph: 1-800-333-0852
www.erico.com

RISER CLAMPS

STANDARD PIPE CLAMP 705


Extended Pipe Clamp
Size Range: 1/2 through 8
Surface Finish: Black
Industrial pipe hanger for field
fabrication during installation of
pipe, when specific center line
distances are unknown
Legs may also be welded to the structure

Part
Number
7050050PL
7050075PL
7050100PL
7050125PL
7050150PL
7050200PL
7050250PL
7050300PL
7050350PL
7050400PL
7050500PL
7050600PL
7050800PL

Nominal
Pipe Size

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"

4-3/16"
4-15/16"
5-3/16"
5-1/2"
5-3/4"
6-1/2"
7-3/4"
8-3/8"
8-7/8"
9-3/4"
11"
13-1/4"
15-3/8"

12-9/16"
12-11/16"
12-7/8"
13"
13-1/8"
13-7/16"
13-11/16"
14"
14-1/4"
14-1/2"
15"
15-11/16"
16-1/16"

Ph: 1-800-333-0852
www.erico.com

41

RISER CLAMPS

SOCKET CLAMP 517


Size Range: 3 through 24
Surface Finish: Black
Industrial pipe hanger used to
prevent separation of caulked or
rubber joints on AWWA cast iron
water main pipes
One clamp is used on each side of
the joint being restrained

Must use threaded rod with hex


nuts to connect the two clamps
utilizing model #516 Socket Clamp
Washers
Part
Number
5170300PL
5170400PL
5170600PL
5170800PL
5171000PL
5171200PL
5171400PL
5171600PL
5171800PL
5172000PL
5172400PL

Nominal
Pipe Size

HS

3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
24"

10-7/8"
12-1/8"
14-3/8"
16-5/8"
18-7/8"
21-1/4"
25-1/2"
28"
31-1/2"
33-3/4"
39-3/4"

3/4"
3/4"
3/4"
3/4"
3/4"
3/4"
1-1/4"
1-1/4"
1-1/4"
1-3/8"
1-1/2"

HS

SOCKET CLAMP WASHER 516


Surface Finish: Black
Used with model #517 Socket Clamp
Part
Number
5160075PL
5160125PL
5160137PL
5160150PL

HS
7/8"
1-3/8"
1-1/2"
1-5/8"

HS

42

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

Page 45

Page 45

Page 46

007

STR

008

Page 47

Page 47

Page 48

STR2

470

008CP

NEW

Page 49

Page 50

Page 51

008CU

U-Hanger

DWV

NE W

NE W

NE W

Page 52

Page 53

Page 54

WH

TPC

CADDY SUPERKLIP

Page 55

Page 55

Page 55

SMS8

SGB

TSGB

Ph: 1-800-333-0852
www.erico.com

43

PIPE FIXINGS

Page 56

Page 57

Page 57

150M

M-Series

MCP-Series

Page 58

Page 59

Page 60

M-Series

MCP-Series

CD-Series

Page 61

Page 62

Page 63

CDCP-Series

801

800

Page 64

Page 64

802

EPS

44

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

PIPE FIXINGS 007


One-hole Strap
Size Range: 1/2 through 2
Surface Finish: Electro-zinc plated
Recommended for supporting
horizontal runs of piping from the
face of a structural member
Fastening hole in strap may be
above or below pipe
B
HS

Part
Number
0070050EG
0070075EG
0070100EG
0070125EG
0070150EG
0070200EG

Nominal
Pipe Size

HS

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"

1-1/8"
1-1/4"
1-3/8"
1-9/16"
1-11/16"
1-15/16"

5/8
5/8
5/8
7/8
7/8
7/8

1/4"
1/4"
1/4"
1/4"
1/4"
1/4"

PIPE FIXINGS STR


One-hole Strap for Strut
Size Range: 1/4 through 1
Surface Finish: Electro-zinc plated
Recommended for supporting
horizontal runs of piping from
CADDY ERISTRUT channel
Part
Number
STR0025EG
STR0037EG
STR0050EG
STR0062EG
STR0075EG
STR0087EG
STR0100EG

Nominal
Pipe Size

HS

1/4
3/8
1/2
5/8
3/4
7/8
1

11/16
3/4
13/16
7/8
15/16
1
1-1/8

9/32
9/32
9/32
9/32
9/32
9/32
9/32

Ph: 1-800-333-0852
www.erico.com

45

B
HS

PIPE FIXINGS

PIPE FIXINGS 008


Two-hole Strap
Size Range: 1/4 through 4
Surface Finish: Electro-zinc plated
Light duty support of pipe
Attaches directly to the face of a
horizontal or vertical structural
member
Conforms with Federal Specification
WW-H-171 (Type 26), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 26)
Part
Number
0080025EG
0080037EG
0080050EG
0080075EG
0080100EG
0080125EG
0080150EG
0080200EG
0080250EG
0080300EG
0080400EG

Nominal
Pipe Size

HS

1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"

15/16"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-7/8"
2-1/8"
3-3/16"
3-1/2"

5/8
5/8
5/8
3/4
3/4
7/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4

1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"

B
HS

46

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

PIPE FIXINGS STR2


Two-hole Strap for Strut
Size Range: 1/2 through 6
Surface Finish: Electro-zinc plated
Recommended for supporting
horizontal runs of piping from
CADDY ERISTRUT channel
Conforms with Federal Specification
WW-H-171 (Type 26), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 26)
Part
Number
STR20050EG
STR20075EG
STR20100EG
STR20125EG
STR20150EG
STR20200EG
STR20250EG
STR20300EG
STR20350EG
STR20400EG
STR20500EG
STR20600EG

Nominal
Pipe Size

HS

1/2"
3/4"
1"
1-1/4
1-1/2
2"
2-1/2"
3"
3-1/2"
4"
5"
6

1-1/16"
1-3/16"
1-3/8"
1-7/16
1-1/2
2-11/16"
2-7/8"
3-5/16"
3-11/16"
3-13/16"
4-7/16"
5-1/16

9/32"
9/32"
9/32"
9/32"
9/32"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"

HS

PIPE FIXINGS 470


Short Clip
Size Range: 1/2 through 4
Surface Finish: Black
Recommended for supporting pipe
runs close to a ceiling or wall
Conforms with Federal Specification
WW-H-171 (Type 26), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 26)

Part
Number

Nominal
Pipe Size

HS

Max. Rec.
Load (lbs)

4700050PL
4700075PL
4700100PL
4700125PL
4700150PL
4700200PL
4700250PL
4700300PL
4700400PL

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"

1-7/16"
1-9/16"
1-11/16"
1-7/8"
2"
2-1/4"
2-1/2"
2-13/16"
3-9/16"

1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/4"
1-1/2"

7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
7/16"
9/16"

300
300
300
300
300
300
500
500
500

Ph: 1-800-333-0852
www.erico.com

47

HS

PIPE FIXINGS

PIPE FIXINGS 008CP


Two-hole Strap for Copper
Tubing
Size Range: 1/4 through 2
Surface Finish: Copper colored coating
(for identification purposes only)
Light duty support of copper tubing
Attaches directly to the face of a
horizontal or vertical structural member
Conforms with Federal Specification
WW-H-171 (Type 26), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 26)
Part
Number
0080025CP
0080037CP
0080050CP
0080075CP
0080100CP
0080125CP
0080150CP
0080200CP

Nominal
Pipe Size

HS

1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"

15/16"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-5/8"
1-7/8"

5/8"
5/8"
5/8"
3/4"
3/4"
7/8"
1-1/4"
1-1/4"

1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"

B
HS

48

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

PIPE FIXINGS 008CU


Two-hole Copper Strap for
Copper Tubing Solid Copper
Size Range: 1/4 through 2
Surface Finish: Plain
Light duty solid copper strap support
for copper tubing
Attaches directly to the face of a
horizontal or vertical structural member
Conforms with Federal Specification
WW-H-171 (Type 26), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 26)
Part
Number

Nominal
Pipe Size

HS

008CU0025PL
008CU0037PL
008CU0050PL
008CU0075PL
008CU0100PL
008CU0125PL
008CU0150PL
008CU0200PL

1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"

7/8"
15/16"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
1-3/4"

5/8
5/8
5/8"
3/4"
3/4"
7/8"
1-1/4"
1-1/4"

1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"

B
HS

Ph: 1-800-333-0852
www.erico.com

49

PIPE FIXINGS

PIPE FIXINGS YOOK


Yook U-type Hanger
Size Range: 1 through 4
Surface Finish: Electro-zinc plated
Use in place of U-hook
Use with Model #43, size #16 x 2 L
Wood Drive Screws
For 2-1/2 thru 4 pipe sizes, use
two drive screws per leg
Part
Number
1351204EG
1351206EG
1351208EG
1351210EG
1351212EG
1352004EG
1352006EG
1352008EG
1352010EG
1352012EG
1353008EG
1353010EG
1353012EG
1354008EG
1354010EG
1354012EG

Nominal
Pipe Size

Max. Rec.
Load (lbs)

1 & 1-1/4"
1 & 1-1/4"
1 & 1-1/4"
1 & 1-1/4"
1 & 1-1/4"
1-1/2 & 2"
1-1/2 & 2"
1-1/2 & 2"
1-1/2 & 2"
1-1/2 & 2"
2-1/2 & 3"
2-1/2 & 3"
2-1/2 & 3"
3-1/2 & 4"
3-1/2 & 4"
3-1/2 & 4"

2-13/16"
2-13/16"
2-13/16"
2-13/16"
2-13/16"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
3-1/2"
4-13/16"
4-13/16"
4-13/16"
5-15/16"
5-15/16"
5-15/16"

4-13/16
6-7/8
8-7/8
10-7/8
12-7/8
4-13/16
6-7/8
8-7/8
10-7/8
12-7/8
8-7/8
10-7/8
12-7/8
8-7/8
10-7/8
12-7/8

250
250
250
250
250
250
250
250
250
250
320
320
320
560
560
560

50

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

PIPE FIXINGS DWV

NEW

DWV Insulated Hanger


Size Range: 1-1/2 through 4
Surface Finish: Electro-zinc plated
with Vinyl Coat
Use in place of U-hook
When hanging steel or cast iron pipe,
install with 1-1/2, #10 wood screws
For 2-1/2 thru 4 pipe sizes, use
two drive screws per leg
Part
Number

Nominal
Pipe Size

1390150EG
1390200EG
1390250EG
1390300EG
1390400EG

1-1/2
2
2-1/2
3
4

1
1
1
1
1

14-3/4
15-1/4
15-1/2
16-3/4
17-1/2

H
W
1/4" DIA.

3/16" DIA.
VINYL
COATED

Ph: 1-800-333-0852
www.erico.com

51

PIPE FIXINGS

NEW

PIPE FIXINGS WH
Wire Pipe Hook PL
Size Range: 1/2 through 2
Surface Finish: Black, Copper-plated,
Vinyl-coated

Part
Number

Nominal
Pipe Size

Plain Finish
WH04050PL
WH06050PL
WH04075PL
WH06075PL
WH08075PL
WH06100PL
WH06125PL
WH06150PL
WH08200PL
WH10200PL
Copper-plated Finish
WH02050CP
WH04050CP
WH06050CP
WH02075CP
WH04075CP
WH06075CP
WH08075CP
WH06100CP
Vinyl-coated Finish
WH04050VC
WH06050VC
WH04075VC
WH06075VC
WH08075VC
WH06100VC
WH06125VC
WH06150VC
WH08200VC

GA

1/2
1/2
3/4
3/4
3/4
1
1-1/4
1-1/2
2
2

10
10
10
10
10
10
10
10
10
10

4
6
4
6
8
6
6
6
8
10

1/2
1/2
1/2
3/4
3/4
3/4
3/4
1

10
10
10
10
10
10
10
10

2-1/2
4
6
2-1/2
4
6
8
6

1/2
1/2
3/4
3/4
3/4
1
1-1/4
1-1/2
2

10
10
10
10
10
10
10
10
10

4
6
4
6
8
6
6
6
8

52

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS
PIPE FIXINGS TPC
Tube and Pipe Clamp

NEW

Size Range: 3/8 through 2-3/8


Positions pipe or tube in stud
wall applications
May be used with the CADDY TSGB
for an adjustable pipe bracket and
clamping system
Part
Number
TPC112
TPC238
TSGB16112
TSGB24112

Description
Tube and pipe clamp 3/8" thru 1-1/8"
Tube and pipe clamp 5/8" thru 2-3/8"
Kit -- includes TPC112 and 16" TSGB
(adjustable screw gun bracket)
Kit -- includes TPC112 and 24" TSGB
(adjustable screw gun bracket)

Ph: 1-800-333-0852
www.erico.com

53

PIPE FIXINGS

PIPE FIXINGS
CADDY SUPERKLIP

NEW

Tube and Pipe Clamp


Size Range: 3/8 through 2
Pushing the tube into the clamp
closes and locks the pipe clamp
Fasten with either wood screw,
dual threaded screw with or without
collar, nail with collar or 1/4
threaded rod
Age resistant, UV resistant, suitable
for outdoor applications
Color: White
Part
Number
389001
389002
389003
389004
389005
389006
389007
389008
389011
389012
389013
389014

Nominal Pipe
Size
IP
CT
3/8"
1/2"
3/8
5/8"
1/2"
3/4
3/4
1"
1
1-1/4
1-1/4 1-1/2
1-1/2
2"
2"
-

A
7/16 9/16
9/16 11/16
11/16 3/4
3/4 7/8
7/8 31/32
31/32 1-3/32
1-3/32 1-7/32
1-7/32 1-13/32
1-9/16 1-23/32
1-27/32 2
2 2-3/16
2-5/16 2-1/2

9/16 1-3/16
9/16 1-3/16
5/8 1-13/32
5/8
1-9/16
21/32 1-5/8
11/16 1-3/4
11/16 1-15/16
11/16 2-1/8
3/4
2-1/2
3/4
2-7/8
25/32 3-3/32
13/16 3-15/32
A

Max. Rec.
Load (lbs)
40
45
50
50
55
60
65
75
85
100
105
120

54

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

PIPE FIXINGS SMS8


Self-tapping Screw
Suitable for screw gun use
#8 x 1/2 long
Part
Number
SMS8

Description
#8 x 1/2 Self-tapping screw

PIPE FIXINGS SGB


Preset Screw Gun Bracket
for Between Studs
Preset for studs 16 or 24 on center
Can mount multiple pipe or tubes
Notched and marked for easy
bending and installation
Requires only a screw gun to install
Can be mounted to face or inside of stud
Can be preassembled by the contractor
to allow for greater productivity at the job site
Part
Number
SGB16A
SGB24A

Stud
Spacing
16 OC
24 OC

PIPE FIXINGS TSGB


Adjustable Screw Gun Bracket
for Between Studs
Can mount multiple pipe or tubes
Notched and marked for easy
bending and installation
Requires only a screw gun to install
Can be mounted to face or inside
of stud
Adjustable for non-standard stud spacing
Unique, one-piece break apart design
Interlocking tab prevents accidental disassembly
Part
Number
TSGB16
TSGB24

Stud
Spacing
16 OC
24 OC

Ph: 1-800-333-0852
www.erico.com

55

PIPE FIXINGS

PIPE FIXINGS 150M


Standard U-bolt
Size Range: 1/2 through 18
Surface Finish: Black, Electro-zinc plated
Pipe support for general piping
applications
Comes with two nuts installed on
each end of U-bolt
Part
Number
Plain Finish
150M0050PL
150M0075PL
150M0100PL
150M0125PL
150M0150PL
150M0200PL
150M0250PL
150M0300PL
150M0400PL
150M0500PL
150M0600PL
150M0800PL
150M1000PL
150M1200PL
150M1400PL
150M1600PL
150M1800PL
Electro-zinc Plated
150M0050EG
150M0075EG
150M0100EG
150M0125EG
150M0150EG
150M0200EG
150M0250EG
150M0300EG
150M0400EG
150M0500EG
150M0600EG
150M0800EG
150M1000EG
150M1200EG
150M1400EG
150M1600EG
150M1800EG

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"
Finish
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"

3-1/2"
3-9/16"
3-11/16"
4-1/8"
4-5/16"
4-13/16"
5-3/4"
6-5/16"
7-5/16"
8-5/16"
10-1/8"
12-1/8"
14-9/16"
16-15/16"
18-3/16"
20-5/16"
22-11/16"

1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
7/8"
7/8"
7/8"
1"

435
435
435
1090
1090
1090
2020
2020
2020
2020
3230
3230
4830
6730
6730
6730
8850

3-1/2"
3-9/16"
3-11/16"
4-1/8"
4-5/16"
4-13/16"
5-3/4"
6-5/16"
7-5/16"
8-5/16"
10-1/8"
12-1/8"
14-9/16"
16-15/16"
18-3/16"
20-5/16"
22-11/16"

1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
7/8"
7/8"
7/8"
1"

435
435
435
1090
1090
1090
2020
2020
2020
2020
3230
3230
4830
6730
6730
6730
8850

56

RS

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

STRUCTURAL
ATTACHMENT M-SERIES
Finger Close Pipe Clamp
Size Range: 1/2 through 2
Surface Finish: CADDY COAT
May be used for either vertical
or horizontal installations
Mounting hole for 1/4 bolt or rod
Part
Number
812M
16M
20M
24M
32M

Nominal
Pipe Size

Max. Rec.
Load (lbs)

1/2" - 3/4"
1"
1-1/4"
1-1/2"
2"

100
100
100
100
100

STRUCTURAL
ATTACHMENT MCP-SERIES
Finger Close Pipe Coppertubing Clamp
Size Range: 1/2 through 2
Surface Finish: Copper-colored coating
(for identification purposes only)
May be used for either vertical
or horizontal installations
Mounting hole for 1/4 bolt or rod
Part
Number
812MCP
16MCP
20MCP
24MCP
32MCP

Nominal
Pipe Size

Max. Rec.
Load (lbs)

1/2" - 3/4"
1"
1-1/4"
1-1/2"
2"

100
100
100
100
100

Ph: 1-800-333-0852
www.erico.com

57

PIPE FIXINGS

STRUCTURAL
ATTACHMENT M-SERIES
Hammer-on, Finger Close
Pipe Clamp
Size Range: 1/2 through 2
Surface Finish: CADDY COAT
Used to support pipe from beam
flanges 1/8 to 3/4 thick
Pipe/tube clip pivots a full 360
Part
Number
812M24
812M58
812M912
16M24
16M58
16M912
20M24
20M58
20M912
24M24
24M58
24M912
32M24
32M58
32M912

Flange
Thickness

Nominal
Pipe Size

Max. Rec.
Load (lbs)

1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"

1/2" - 3/4"
1/2"
1/2"
1"
1"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
1-1/2"
2"
2"
2"

75
75
75
75
75
75
75
75
75
75
75
75
75
75
75

58

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

STRUCTURAL
ATTACHMENT MCP-SERIES
Hammer-on, Finger Close
Copper Tubing Clamp
Size Range: 1/2 through 2
Surface Finish: Copper colored coating
(for identification purposes only)
Used to support copper tubing from
beam flanges 1/8 to 3/4 thick
Pipe/tube clip pivots a full 360
Part
Number
6MCP24
6MCP58
6MCP912
812MCP24
812MCP58
812MCP912
16MCP24
16MCP58
16MCP912
20MCP24
20MCP58
20MCP912
24MCP24
24MCP58
24MCP912
32MCP24
32MCP58
32MCP912

Flange
Thickness

Nominal
Pipe Size

Max. Rec.
Load (lbs)

1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"
1/8" - 1/4"
5/16" - 1/2"
9/16" - 3/4"

1/2
1/2
1/2
1/2" - 3/4"
1/2"
1/2"
1"
1"
1"
1-1/4"
1-1/4"
1-1/4"
1-1/2"
1-1/2"
1-1/2"
2"
2"
2"

75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75

Ph: 1-800-333-0852
www.erico.com

59

PIPE FIXINGS

STRUCTURAL
ATTACHMENT CD-SERIES
One-piece Pipe Clip
Size Range: 1/2 through 2
Surface Finish: Electro-zinc plated
May be used for either vertical or
horizontal installations

Part
Number
CD0B
CD1B
CD2B
CD3B
CD4B
CD5B
CD6B
CD7B
CD8B
CD9B
CD0B37
CD1B37
CD2B37
CD3B37
CD4B37
CD5B37

Flange
Thickness

Bolt
Size

Max. Rec.
Load (lbs)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"

1/4"
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"

250
250
250
250
350
350
350
350
350
350
250
250
250
250
350
350

60

BS

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

STRUCTURAL
ATTACHMENT CDCP-SERIES
One-piece Pipe Clip for
Copper Tubing
Size Range: 1/2 through 2
Surface Finish: Copper colored coating
(for identification purposes only)
May be used for either vertical or
horizontal installations

Part
Number

Flange
Thickness

Bolt
Size

Max. Rec.
Load (lbs)

CD0BCP
CD1BCP
CD2BCP
CD2.5BCP
CD3BCP
CD5BCP
CD0B37CP
CD1B37CP
CD2B37CP
CD2.53B37CP
CD3B37CP
CD5B37CP

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"

1/4"
1/4"
1/4"
1/4"
1/4"
5/16"
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"

250
250
250
250
350
350
250
250
250
250
350
350

Ph: 1-800-333-0852
www.erico.com

61

BS

PIPE FIXINGS

PIPE FIXINGS 801


Standard Pipe Stay
Size Range: 1/2 through 2
(Copper) 3/8 through 2 (Iron)
Surface Finish: Black epoxy coat
Used for water, heat or gas lines
Sized for copper or iron pipe sizes

Part
Number

Nominal Iron
Pipe Size

Nominal Copper
Pipe Size

801037050EP
801050075EP
801075100EP
801100125EP
801125150EP
801150000EP
801000200EP
801200000EP

3/8
1/2
3/4"
1"
1-1/4
1-1/2
2

1/2
3/4"
1"
1-1/4"
1-1/2
2
-

2-1/4"
2-1/4"
2-9/16"
2-9/16"
4-1/4"
4-1/4"
4-3/8"
4-3/8"

62

Ph: 1-800-333-0852
www.erico.com

PIPE FIXINGS

PIPE FIXINGS 800


Extended Pipe Stay
Size Range: 1/2 through 1-1/4
(Copper) 3/8 through 1 (Iron)
Surface Finish: Black epoxy coat
Used for water, heat or gas lines
Sized for copper or iron pipe sizes

Part
Number

Nominal Iron
Pipe Size

Nominal Copper
Pipe Size

800037050EP
800050075EP
800075100EP
800100125EP

3/8"
1/2"
3/4"
1"

1/2"
3/4"
1"
1-1/4"

3-5/16"
3-5/16"
3-11/16"
3-13/16"

Ph: 1-800-333-0852
www.erico.com

63

PIPE FIXINGS

PIPE FIXINGS 802


Double Pipe Stay
Size Range: 1/2 through 1
(Copper) 3/8 through 3/4 (Iron)
Surface Finish: Black epoxy coat
Used for water, heat or gas lines
Sized for copper or iron pipe sizes
Part
Number
802037050EP
802050075EP
802075100EP

Nominal Iron Nominal Copper


Pipe Size
Pipe Size
3/8
1/2
3/4

1/2
3/4
1"

A
2-3/16"
2-3/16"
2-9/16"

PIPE FIXINGS EPS


One-hole Strap for
Thin-walled Conduit
Size Range: 1/2 thru 2
EMT conduit
Surface Finish: Electro-zinc plated

Part
Number
EPS0050EG
EPS0075EG
EPS0100EG
EPS0125EG
EPS0150EG
EPS0200EG

Nominal
Pipe Size

HS

1/2
3/4
1
1-1/4
1-1/2
2

3/4
7/8
1
1-1/4
1
1-1/4"

9/32
9/32
9/32
9/32
11/32
11/32

HS

64

Ph: 1-800-333-0852
www.erico.com

UNIVERSAL SUPPORT SYSTEM


CADDY SPEED LINK
NEW

NE W

Page 66

Page 67

Page 68

CADDY SPEED LINK

CADDY SPEED LINK LD

SLADCP

Page 68

Page 68

Page 68

SLADS

SLWC

SLWPT

Page 68

SLEB

Ph: 1-800-333-0852
www.erico.com

65

UNIVERSAL SUPPORT SYSTEM


CADDY SPEED LINK

NEW

Hanging System
Size Range: 0.079 and 0.118
wire rope
Surface Finish: Stainless Steel/
Galvanized Steel

Universal support system


recommended for the suspension of
ductwork, piping or equipment
Tested and found to be acceptable
alternative to the duct hanger
systems prescribed in the SMACNASM
HVAC Duct Construction Standards
(HVAC-DCS), 2nd Edition, Chapter 4,
Tables 4-1, 4-1M, 4-2 and 4-2M
Meets the fire rating requirements for
DIN 4102-2 for 30 minutes at 30%
of rated load
5:1 Safety Factor
Part
Wire Rope Dimensions
Number Wire Rope Size
Length
SLD2L1
0.079 in (2 mm)
SLD2L2
0.079 in (2 mm)
SLD2L3
0.079 in (2 mm)
SLD2L5
0.079 in (2 mm)
SLD2L10 0.079 in (2 mm)
SLD3L1
0.118 in (3 mm)
SLD3L2
0.118 in (3 mm)
SLD3L3
0.118 in (3 mm)
SLD3L5
0.118 in (3 mm)
SLD3L10 0.118 in (3 mm)
Individually Packaged
SLD2L1BP 0.079 in (2 mm)
SLD2L2BP 0.079 in (2 mm)
SLD2L3BP 0.079 in (2 mm)
SLD3L2BP 0.118 in (3 mm)
SLD3L3BP 0.118 in (3 mm)
Stainless Steel
SLD3L2SS 0.118 in (3 mm)
SLD3L3SS 0.118 in (3 mm)

Qty. per Max. Working The ERICO website


contains an aid to
Box
Load (lbs)
determine the length

3.3 ft (1 m)
6.6 ft (2 m)
9.9 ft (3 m)
16.4 ft (5 m)
32.8 (10 m)
3.3 ft (1 m)
6.6 ft (2 m)
9.9 ft (3 m)
16.4 ft (5 m)
32.8 (10 m)

100
100
100
50
25
100
100
50
50
25

100 lbs (45 kg) of the CADDY SPEED


LINK necessary for a
100 lbs (45 kg) specific application.
100 lbs (45 kg)
100 lbs (45 kg)
100 lbs (45 kg)
200 lbs (90 kg)
200 lbs (90 kg)
200 lbs (90 kg)
200 lbs (90 kg)
200 lbs (90 kg)

3.3 ft (1 m)
6.6 ft (2 m)
9.9 ft (3 m)
6.6 ft (2 m)
9.9 ft (3 m)

100
100
100
100
50

100 lbs (45 kg)


100 lbs (45 kg)
100 lbs (45 kg)
200 lbs (90 kg)
200 lbs (90 kg)

6.6 ft (2 m)
9.9 ft (3 m)

100
50

200 lbs (90 kg)


200 lbs (90 kg)

Features
Eliminates threaded rod and associated hardware
Reduces installation time
Quickly installs as a stand-alone hanging system without drilling into
the building structure
Increases installation versatility
Allows for easy adjustments of supported objects during and after
installation with a unique locking device

66

Ph: 1-800-333-0852
www.erico.com

UNIVERSAL SUPPORT SYSTEM


CADDY SPEED LINK LD
Light Duty Hanging System

NEW

Size Range: 0.059 wire rope


Surface Finish: Stainless Steel/
Galvanized Steel
Universal support system
recommended for the suspension
of ductwork, piping or equipment
Meets the fire rating requirements
for DIN 4102-2 for 30 minutes at
30% of rated load
5:1 Safety Factor
Part
Number

Wire Rope Dimensions


Wire Rope Size
Length

SLD15L2
0.059 in (1.5 mm)
SLD15L5
0.059 in (1.5 mm)
SLD15L10 0.059 in (1.5 mm)
Stainless Steel
SLD15L2S 0.059 in (1.5 mm)
SLD15L5S 0.059 in (1.5 mm)
SLD15L10S 0.059 in (1.5 mm)

Qty. per
Box

Max. Working
Load (lbs)

6.6 ft (2 m)
16.4 ft (5 m)
32.8 ft (10 m)

20
20
20

44 lbs (20 kg)


44 lbs (20 kg)
44 lbs (20 kg)

6.6 ft (2 m)
16.4 ft (5 m)
32.8 ft (10 m)

2
2
2

44 lbs (20 kg)


44 lbs (20 kg)
44 lbs (20 kg)

Features
Cost-effective alternative to jack chain, threaded rod
and associated hardware
Safe working load of 20 kg (44 lb)
Adjustable after installation
Works with a variety of CADDY Fasteners
The ERICO website contains an aid to determine the length of
the CADDY SPEED LINK necessary for a specific application.

Ph: 1-800-333-0852
www.erico.com

67

UNIVERSAL SUPPORT SYSTEM

CADDY SPEED LINK


TOOLS AND ACCESSORIES

VAFT

Part
Number
SLADCP
SLADS
SLWC
SLWPT
SL1214
SL1518
SLLC250*
SLEB250
SLEB375
SLEBWS
VAFT

Description

Qty.
per Box

Air Duct Corner Protector


Air Duct Support Attachment
Wire Cutter
Wire Insulation Protection Tube
Cable Clip .468-.562 MC/AC Cable
Cable Clip .500-.718 MC/AC Cable
Lighting Clip, 1/4
Eye Bolt M6; 1/4; 1-1/4 long
Eye Bolt M8; 3/8; 1-1/2 long
Eye Bolt for Wood; H6, 60 mm long
Installation tool for VF & AF assemblies

10
100
1
82 ft
100
100
200
100
100
100
1

* 22,5 kg ultimate static load limit

SLADCP

SLADS

SLWPT

SLEB250/SLEB375/SLEBWS

68

SLWC

Ph: 1-800-333-0852
www.erico.com

PIPE & EQUIPMENT SUPPORTS

CADDY PYRAMID

Page 70

Page 71

CADDY PYRAMID 25

CADDY PYRAMID 50

Ph: 1-800-333-0852
www.erico.com

NEW

NEW

NEW

69

Page 72

CADDY PYRAMID 150


CADDY PYRAMID 300
CADDY PYRAMID 600

PIPE & EQUIPMENT SUPPORTS


CADDY PYRAMID 25
Tested for outdoor use

NEW

Small 4 x 5 footprint
Innovative designs wont
damage roof membranes

Part
Number

Fig.
No.

PPRPS25H4
PPRPS25H6

1
2

Description

Max. Rec.
Load (lbs)

3-5/8 High Rooftop Pipe Support


5-5/8 High Rooftop Pipe Support

25
25

Features
Lightweight Less than 1/3 lb.
Protective Sled design distributes the load evenly and protects
the roof membrane
Durable UV-Resistant
Capable Handles up to three 1/2 or two 3/4 or 1 pipes/conduit
Easy to Install No tools or fasteners needed
Available in both 3-5/8 in. high and 5-5/8 in. high models

1
13/16

3-5/8

4-11/16

5-11/16

Fig. 1
1
13/16

5-5/8

4-11/16

5-11/16

Fig. 2

70

Ph: 1-800-333-0852
www.erico.com

PIPE & EQUIPMENT SUPPORTS


CADDY PYRAMID 50
Eliminates need to field-fabricate
rooftop pipe supports

NEW

Large footprints of foam bases


distribute loads over wider area
Tested for outdoor use
Innovative designs wont damage
roof membranes
The RPS50AHSV is a support for pipes
and equipment in plenum areas below
raised floors
Surface Finish: Electro-zinc
plated, CADDY COAT Silver
14 gauge steel top accepts standard
strut fittings
Part
Number

Fig.
No.

RPS50AHSV
RPS50H4EG
RPS50H6EG

3
4
5

10-3/8
10-3/8
10-3/8

W
3-5/16
4
5

Max. Rec.

2-5/16
4
6

Load (lbs)
50
50
50

2-5/16

10-3/8

3-5/16

Fig. 3

CADDY COAT Silver

4 RPS50H4
6 RPS50H6

4 RPS50H4
5 RPS50H6

10-3/8

Electro-zinc plated

Fig. 4 & 5

Ph: 1-800-333-0852
www.erico.com

71

PIPE & EQUIPMENT SUPPORTS


CADDY PYRAMID 150
CADDY PYRAMID 300
CADDY PYRAMID 600

NEW

Surface Finish: Electro-zinc plated


Tested for outdoor use
Each base includes a total of six (6)
3/8-16 threaded inserts to facilitate
attachment of threaded hardware
Eliminates need to field-fabricate
rooftop pipe supports
Large footprints of bases distribute
loads over wider area
Innovative designs wont damage
roof membranes
Available as an assembly with and
without CADDY ERISTRUT channel
attached for use as a pipe or
equipment support
May also be used with the P10, P11
and P12 post bases
Part
Number
RPS150T1
RPS150T2
RPS300T1
RPS300T2
RPS600T2
RPSCSEG

Fig.
No.

With
Strut

Max. Rec.
Load (lbs)

6
7
6
7
8
Not
shown

16
16
16
16
32
-

12
12
12
12
12
-

3-3/16
4
3-3/16
4
4
-

X
X
X
-

150
150
300
300
600
600

12.0

12.0

3-3/16

3-3/16

4.0

16.0

16.0

Fig. 6

Fig. 7

12.0

3-3/16

4.0

32-5/16

Fig. 8

72

Ph: 1-800-333-0852
www.erico.com

PERFORATED PIPE STRAPS

Page 74

Page 74

Page 75

EG

CP

CU

Page 75

Page 76

MSR

MSS

Ph: 1-800-333-0852
www.erico.com

73

PERFORATED PIPE STRAPS

PIPE FIXINGS 009


Perforated Hanger Strap EG
Size Range: 3/4 x 10 L
Surface Finish: Electro-zinc plated
Light duty, residential pipe support
Follow fastener manufacturers
recommended shear and pull-out
strength guidelines when fastening
to the structure
Part
Number
0097524EG

Strap
Gauge

Max. Rec.
Load (lbs)

24

10' - 0"

10
L
3/4"

3/4"

1/4" DIA.

Ga.

PIPE FIXINGS 009


Perforated Hanger Strap CP
Size Range: 3/4 x 10 L
Surface Finish: Copper-colored coating
(for identification purposes only)
Light duty, residential pipe support
Follow fastener manufacturers
recommended shear and pull-out
strength guidelines when fastening
to the structure
Part
Number
0097524CP

Strap
Gauge

Max. Rec.
Load (lbs)

24

10' - 0"

10
L
3/4"

3/4"

1/4" DIA.

Ga.

74

Ph: 1-800-333-0852
www.erico.com

PERFORATED PIPE STRAPS

PIPE FIXINGS 009


Perforated Hanger Strap CU
Size Range: 3/4 x 10 L
Surface Finish: Solid Copper
Light duty, residential pipe support
Follow fastener manufacturers
recommended shear and pull-out
strength guidelines when fastening
to the structure
Part
Number
0097524CU

Strap
Gauge

Max. Rec.
Load (lbs)

24

10' - 0"

10
L
3/4"

3/4"

1/4" DIA.

Ga.

STRUCTURAL
ATTACHMENTS MSR
Hammer-On Strap Hanger Clip
Size Range: 1/8 3/4 Flange
Thickness
Surface Finish: Electro-zinc plated,
CADDY COAT
Supports pipe or duct from flange
with banding or strapping
Note: Pre-measure length of strap,
hammer clip onto flange, then
trapeze pipe or duct. Accepts strap
up to 1-1/4 wide
Part
Number
MSR24
MSR58
MSR912

Flange
Thickness

Max. Rec.
Load (lbs)

1/8 1/4
5/16 1/2
9/16 3/4

200
200
200

Ph: 1-800-333-0852
www.erico.com

75

PERFORATED PIPE STRAPS

STRUCTURAL
ATTACHMENTS MSS
Hammer-On Strap Hanger Clip
Size Range: 1/8 3/4 Flange
Thickness
Surface Finish: Electro-zinc plated,
CADDY COAT
Supports pipe or duct from flange
with banding or strapping
Note: Pre-measure length of strap, hammer
clip on to flange, then trapeze pipe or duct.
Accepts strap up to 1-1/4 wide
Part
Number
MSS24
MSS58
MSS912

Flange
Thickness

Max. Rec.
Load (lbs)

1/8 1/4
5/16 1/2
9/16 3/4

200
200
200

76

Ph: 1-800-333-0852
www.erico.com

STRUT PIPE CLAMPS

NEW

Page 78

Page 79

Page 80

RIGD

OD

PCC

Page 81

Page 82

Page 82

TCC

COPC

EMTC

NEW

NEW

NEW

Page 83

Page 83

Page 84

TSM

TSMI

SCH

Page 85

Page 86

Page 86

SK

STR

STR2

Page 87

Page 87

UNIV

VS-20

NEW

Ph: 1-800-333-0852
www.erico.com

77

STRUT PIPE CLAMPS


STRUT PIPE CLAMPS RIGD
Heavy Duty Strut Clamps

NEW

Size Range: 3/8 thru 8


Surface Finish: Electro-zinc plated
One piece break apart design
(1/2 thru 4 pipe size) includes
captive combo head machine screw
and built in nut (thread impression)
Part
Number
RIGD0037EG
RIGD0050EG
RIGD0075EG
RIGD0100EG
RIGD0125EG
RIGD0150EG
RIGD0200EG
RIGD0250EG
RIGD0300EG
RIGD0350EG
RIGD0400EG
RIGD0500EG
RIGD0600EG
RIGD0800EG

Nominal
Pipe Size

OD

Strap GA

3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8

.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625

17
14
14
14
14
12
12
12
12
11
11
12
10
10

GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA

Max. Rec.
Load (lbs)
400
400
600
600
600
800
800
800
800
1000
1000
1000
1000
1000

OD

1-1/4"

78

Ph: 1-800-333-0852
www.erico.com

STRUT PIPE CLAMPS

STRUT PIPE CLAMPS OD


Four piece Strut Clamps for Tubing
Size Range: 1/4 thru 8-5/8
Surface Finish: Electro-zinc plated
Other sizes available upon request
Four piece design includes hex head
machine screw and square nut
Part
Number

OD
(in)

OD0025EG
OD0037EG
OD0050EG
OD0062EG
OD0075EG
OD0087EG
OD0100EG
OD0112EG
OD0125EG
OD0137EG
OD0150EG
OD0162EG
OD0175EG
OD0187EG
OD0200EG
OD0212EG
OD0225EG
OD0237EG
OD0250EG
OD0262EG
OD0275EG
OD0287EG
OD0300EG
OD0312EG
OD0325EG
OD0337EG
OD0350EG
OD0362EG
OD0375EG
OD0387EG
OD0400EG
OD0412EG
OD0425EG
OD0437EG
OD0450EG
OD0462EG
OD0475EG
OD0487EG
OD0500EG
OD0512EG

1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2 3/4
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8
5
5-1/8

Strap
GA
17
17
17
17
17
17
15
15
15
15
15
15
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
12
12
12
12
12
12
12
12
12
12
12
12
12

Ph: 1-800-333-0852
www.erico.com

GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA

Max. Rec.
Load (lbs)

Part
Number

OD
(in)

400
400
400
400
400
400
600
600
600
600
600
600
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000

OD0525EG
OD0537EG
OD0550EG
OD0562EG
OD0575EG
OD0587EG
OD0600EG
OD0612EG
OD0625EG
OD0637EG
OD0650EG
OD0662EG
OD0675EG
OD0687EG
OD0700EG
OD0712EG
OD0725EG
OD0737EG
OD0750EG
OD0762EG
OD0775EG
OD0787EG
OD0800EG
OD0812EG
OD0825EG
OD0837EG
OD0850EG
OD0862EG

5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
6-1/2
6-5/8
6-3/4
6-7/8
7
7-1/8
7-1/4
7-3/8
7-1/2
7-5/8
7-3/4
7-7/8
8
8-1/8
8-1/4
8-3/8
8-1/2
8-5/8

Strap
GA
12
12
12
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA

Max. Rec.
Load (lbs)
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000

OD

1-1/4"

79

STRUT PIPE CLAMPS

CADDY CUSHION
CLAMP PCC
Pipe Cushion Clamps
Size Range: 1/4 thru 6
Surface Finish: Yellow di-chromate
Ideal for multiple runs while
absorbing shock and vibration,
reducing unwanted noise and
preventing galvanic corrosion
Fits any standard 1-5/8 wide
strut channel
Interlock edges and channel locator
legs help ensure that the cushion
remains in place
Part
Number

Nominal
Pipe Size

ID

PCC0025EG
PCC0037EG
PCC0050EG
PCC0075EG
PCC0100EG
PCC0125EG
PCC0150EG
PCC0200EG
PCC0250EG
PCC0300EG
PCC0350EG
PCC0400EG
PCC0500EG
PCC0600EG

1/4"
3/8"
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"

.54
.67
.84
1.05
1.31
1.66
1.90
2.37
2.87
3.50
4.00
4.50
5.56
6.62

.98
1.13
1.29
1.57
1.76
2.17
2.35
2.82
3.32
3.95
4.45
4.95
6.01
7.07

1.34
1.54
1.82
2.08
2.34
2.73
2.86
3.67
4.17
4.79
5.42
5.92
6.92
8.23

Controlled Squeeze
Shoulder Bolt

1-9/16"

ID

Elastic
Stopnut

Plated or
Stainless Steel
Clamp

Elastomer
Cushion
Living Hinge

80

Ph: 1-800-333-0852
www.erico.com

STRUT PIPE CLAMPS

CADDY CUSHION
CLAMP TCC
Tubing Cushion Clamps
Size Range: 1/4 thru 6
Surface Finish: Yellow di-chromate
Ideal for multiple runs while
absorbing shock and vibration,
reducing unwanted noise and
preventing galvanic corrosion
Fits any standard 1-5/8 wide
strut channel
Interlock edges and channel locator
legs help ensure that the cushion
remains in place
Part
Number

TCC0025CP
TCC0037CP
TCC0050CP
TCC0062CP
TCC0075CP
TCC0087CP
TCC0100CP
TCC0112CP
TCC0125CP
TCC0137CP
TCC0150CP
TCC0162CP
TCC0175CP
TCC0187CP
TCC0200CP
TCC0212CP
TCC0250CP
TCC0262CP
TCC0300CP
TCC0312CP
TCC0331CP
TCC0362CP
TCC0412CP
TCC0431CP
TCC0512CP
TCC0612CP

Nominal Pipe Size


Copper Copper
& Steel Water Pipe
Tubing (Nominal)
1/4
3/8
1/4
1/2
3/8
5/8
1/2
3/4
5/8
7/8
3/4
1
7/8
1-1/8
1
1-1/4
1-1/8
1-3/8
1-1/4
1-1/2
1-3/8
1-5/8
1-1/2
1-3/4
1-7/8
2
2-1/8
2
2-1/2
2-5/8
2-1/2
3
3-1/8
3
3-5/16
3-5/8
4-1/8
4
4-5/16
5-1/8
5
6-1/8
6

Ph: 1-800-333-0852
www.erico.com

ID

B
1-9/16"

.25
.37
.50
.62
.75
.87
1.00
1.12
1.25
1.37
1.50
1.62
1.75
1.87
2.00
2.12
2.50
2.62
3.00
3.12
3.31
3.62
4.12
4.34
5.12
6.12

.62
.82
.94
1.06
1.20
1.31
1.44
1.57
1.70
1.82
1.95
2.07
2.20
2.32
2.45
2.57
2.94
3.07
3.57
3.57
3.96
4.20
4.57
4.96
5.57
6.57

81

.98
1.13
1.34
1.54
1.68
1.82
1.95
2.08
2.21
2.34
2.47
2.60
2.73
2.86
3.04
3.23
3.79
3.92
4.29
4.42
4.75
5.11
5.54
5.84
6.54
7.54

ID

A
Controlled Squeeze
Shoulder Bolt
Elastic
Stopnut

Living
Hinge
Plated or
Stainless Steel
Clamp

Elastomer
Cushion

STRUT PIPE CLAMPS

STRUT PIPE CLAMPS COPC


One piece Strut Clamps for
Copper Tubing
Size Range: 1/4 thru 6
Surface Finish: Copper-colored coating
(for identification purposes only)
One piece break apart design
(1/2 thru 4 pipe size)
includes captive combo head
machine screw and built
in nut (thread impression)
Part
Number

Nominal
Pipe Size

OD

Max. Rec.
Load (lbs)

COPC0025CP
COPC0037CP
COPC0050CP
COPC0075CP
COPC0100CP
COPC0125CP
COPC0150CP
COPC0200CP
COPC0250CP
COPC0300CP
COPC0350CP
COPC0400CP
COPC0500CP
COPC0600CP

1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6

3/8
1/2
5/8
7/8
1-1/8
1-3/8
1-5/8
2-1/8
2-5/8
3-1/8
3-5/8
4-1/8
5-1/8
6-1/8

400
400
400
400
600
600
600
800
800
800
1000
1000
1000
1000

1-1/4"

OD

STRUT PIPE CLAMPS EMTC


Four piece Strut Clamps for
EMT Conduit
Size Range: 1/2 thru 2 EMT conduit
Surface Finish: Electro-zinc plated
Four piece design includes slotted head
machine screw and square nut
Part
Number

Nominal
Pipe Size

Max. Rec.
Load (lbs)

EMTC0050EG
EMTC0075EG
EMTC0100EG
EMTC0125EG
EMTC0150EG
EMTC0200EG

1/2
3/4
1
1-1/4
1-1/2
2

400
600
600
600
800
800
1-1/4"

82

Ph: 1-800-333-0852
www.erico.com

STRUT PIPE CLAMPS


PIPE FIXINGS TSM
TSM Non-metallic Tubing
Channel Clip

NEW

Size Range: 1/4 thru 1-1/2 CT sizes


Use for installation of refrigeration,
A/C tubing and PEX piping in
horizontal and vertical channels
Requires no tools for installation
Fits any standard 1-5/8 wide
strut channel
Part
Number
TSM0037
TSM0050
TSM0062
TSM0075
TSM0087
TSM0112
TSM0137
TSM0162

Nominal
CT Size

PEX
Piping

CPVC
Drain Pipe

1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2

1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2

1/2
3/4
1
-

PIPE FIXINGS TSMI

NEW

TSMI Non-metallic Tubing


Channel Clip for Insulated Lines

Size Range: 1/4 thru 1-1/2 CT sizes


Use for installation of refrigeration,
A/C tubing and PEX piping in
horizontal and vertical channels
Requires no tools for installation
Fits any standard 1-5/8 wide
strut channel
Allows installation of copper tubing
together with insulation of either
3/8 (9 mm) or 1/2 (13 mm) thickness
Part
Number
TSMI0037
TSMI0050
TSMI0062
TSMI0075
TSMI0087
TSMI0112
TSMI0137
TSMI0162

Nominal
CT Size

PEX
Piping

CPVC
Drain Pipe

1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2

1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2

1/2
3/4
1
-

Ph: 1-800-333-0852
www.erico.com

83

STRUT PIPE CLAMPS


STRUT PIPE CLAMPS SCH

NEW

One-piece Strut Clips for


MC/AC Cable and EMT Conduit
Size Range: 1/2 thru 4
Surface Finish: Electro-zinc plated
One-piece installation no screws
or bolts to drop
Requires only a screwdriver or
nutdriver for installation
Fits any standard 1-5/8 wide
strut channel
Part
Number
SCH8
SCH12
SCH16
SCH20
SCH6B
SCH8B
SCH12B
SCH16B
SCH20B
SCH24B
SCH32B
SCH40B
SCH48B
SCH56B
SCH64B
SCH72B

Fig.
No.

EMT

RIGID

Cable OD
Range

Max. Rec.
Load (lbs)

1
1
1
1
2
2
2
2
2
2
2
3
3
3
3
3

1/2
3/4
1
1-1/4
3/8 MC/AC
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4

1/2
3/4
1
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4

.10 - .63
.34 - .71
.57 - .92
.72 1.16
1.00 1.51
1.25 1.74
1.74 2.20
2.00 2.38
2.38 2.88
2.72 3.50
3.25 4.00
3.85 4.50

200
200
200
200
200
200
200
200
200
350
350
350
350
350
350
350

Fig. 1

Fig. 2

84

Fig. 3

Ph: 1-800-333-0852
www.erico.com

STRUT PIPE CLAMPS


STRUT PIPE CLAMPS SK

NEW

One-piece Universal Strut Clips


Size Range: 1/2 thru 4
Surface Finish Electro-zinc plated
One-piece break apart design
includes captive combo head
machine screw and built-in nut
(thread impression)
Fits any standard 1-5/8 wide
strut channel
One size fits both EMT conduit and
Rigid pipe sizes
Part
Number

Fig.
No.

EMT
RIGID

Max. Rec.
Load (lbs)

1
1
1
1
1
1
2
2
2
2

1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4

200
200
200
200
200
200
350
350
350
350

SK85I
SK125I
SK165I
SK205I
SK245I
SK325I
SK405I
SK485I
SK565I
SK645I

1-1/4"

1-1/4"

Fig. 1

Fig. 2

Ph: 1-800-333-0852
www.erico.com

85

STRUT PIPE CLAMPS

PIPE FIXINGS STR


One-hole Pipe Strap for Strut
Size Range: 1/4 thru 1
Surface Finish: Electro-zinc plated
Fits any standard 1-5/8 wide
strut channel

Part
Number
STR0025EG
STR0037EG
STR0050EG
STR0062EG
STR0075EG
STR0087EG
STR0100EG

Nominal
Pipe Size

HS

1/4
3/8
1/2
5/8
3/4
7/8
1

11/16
3/4
13/16
7/8
15/16
1
1-1/8

9/32
9/32
9/32
9/32
9/32
9/32
9/32

HS

1-5/8"

PIPE FIXINGS STR2


Two-hole Pipe Strap for Strut
Size Range: 1/2 thru 6
Surface Finish: Electro-zinc plated
Fits any standard 1-5/8 wide
strut channel

Part
Number
STR20050EG
STR20075EG
STR20100EG
STR20125EG
STR20150EG
STR20200EG
STR20250EG
STR20300EG
STR20350EG
STR20400EG
STR20500EG
STR20600EG

Nominal
Pipe Size

HS

Max. Rec.
Load (lbs)

1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6

1-1/16
1-3/16
1-3/8
1-7/16
1-5/8
2-3/16
2-7/16
2-13/16
3-1/4
3-5/16
3-7/8
4-1/2

9/32
9/32
9/32
9/32
9/32
7/16
7/16
7/16
7/16
7/16
7/16
7/16

600
600
600
600
600
1200
1200
1200
1200
1500
1500
1500

86

HS

1-5/8"

Ph: 1-800-333-0852
www.erico.com

STRUT PIPE CLAMPS


STRUT PIPE CLAMPS UNIV
One-piece Strut Clip for Rigid
or EMT Conduit
Size Range: 1/2 thru 2 Rigid
or EMT conduit
Surface Finish: Electro-zinc plated
One-piece break apart design
includes captive combo head
machine screw and built-in nut
(thread impression)
Part
Number

Nominal
Pipe Size

Max. Rec.
Load (lbs)

1/2
3/4
1
1-1/4
1-1/2
2

400
600
600
600
800
800

UNIV0050EG
UNIV0075EG
UNIV0100EG
UNIV0125EG
UNIV0150EG
UNIV0200EG

PIPE FIXINGS VS-20


Vibra-strip Cushion Strip
for Strut Clamps
Isolation material for use with
strut clamps
Inhibits galvanic corrosion
Dampens sound and vibration
Service temperature range of
-75F to +375F
P/N: VS200000

Ph: 1-800-333-0852
www.erico.com

87

ucts
NEW Prod
CPVC PIPE FIXING SO
Two-hole strap for CPVC pipe
Support CPVC pipe off of the
vertical face of structural
or composite wood joists with a
minimum of 3/8 web thickness

See page 91

88

Ph: 1-800-333-0852
www.erico.com

CPVC PIPE FIXINGS

10

Page 90

Page 90

Page 91

107

108

109

NEW

Page 91

SO

Ph: 1-800-333-0852
www.erico.com

89

CPVC PIPE FIXINGS

10

CPVC PIPE FIXINGS 107


One-hole Wrap Around Strap
for CPVC Pipe
Size Range: 3/4 thru 2 CPVC pipe
Surface Finish: Electro-zinc plated
Support CPVC pipe horizontally
from top or side of beam
Flared edges protect the CPVC piping
Part
Number

1070075EG
1070100EG
1070125EG
1070150EG
1070200EG

Nominal
Pipe Size

3/4
1
1-1/4
1-1/2
2

1-1/4
2-3/8
1-7/16 2-11/16
1-5/8
3-1/16
1-3/4
3-5/16
1-7/8 3-11/16

Max. Hanger
Spacing

5-1/2
6'
6-1/2
7
8

1-3/16"

.230 DIA.

A
B

CPVC PIPE FIXINGS 108


Two-hole Strap for CPVC Pipe
Size Range: 3/4 thru 2 CPVC pipe
Surface Finish: Electro-zinc plated
Support CPVC pipe horizontally from
top, bottom or side of beam
Retainer dimples secure hanger to
pipe during installation
Flared edges protect the CPVC piping
Part
Nominal
Number Pipe Size
1080075EG
1080100EG
1080125EG
1080150EG
1080200EG

3/4
1
1-1/4
1-1/2
2

Max. Hanger
Spacing

3-1/4
3-1/2
4-1/4
4-7/16
4-15/16

2-1/4
2-1/2
3-1/4
3-7/16
3-15/16

5-1/2
6'
6-1/2
7
8

90

.230 DIA.

1-3/16"

Ph: 1-800-333-0852
www.erico.com

CPVC PIPE FIXINGS

10

CPVC PIPE FIXINGS 109


Side Mount Strap for CPVC Pipe
Size Range: 3/4 thru 2 CPVC pipe
Surface Finish: Electro-zinc plated
Support CPVC pipe horizontally from
top or bottom of beam
Retainer dimples secure hanger to
pipe during installation

Flared edges protect the CPVC piping


Part
Number

Nominal
Pipe Size

1090075EG
1090100EG
1090125EG
1090150EG
1090200EG

3/4
1
1-1/4
1-1/2
2

Max. Hanger
Spacing

2-5/16 1-11/16
2-5/8 1-15/16
2-15/16 2-5/16
3-3/16 2-1/2
3-5/8
3

CPVC PIPE FIXINGS SO

.230 DIA.

5-1/2
6'
6-1/2
7
8

1-3/16"

NEW

Stand-off Two-hole Strap


for CPVC Pipe
Size Range: 3/4 thru 2 CPVC pipe
Surface Finish: Electro-zinc plated

Support CPVC pipe off of the vertical


face of structural or composite wood
joists with a minimum of 3/8 web
thickness
Flared edges protect the CPVC piping
NOTE: DO NOT install on the bottom of a beam or under

other horizontal surfaces. For those applications see ERICO


Model #108 2-hole strap for CPVC pipe.
Part
Nominal
Number Pipe Size
SO12A
SO16A
SO20A
SO24A
SO32A

3/4
1
1-1/4
1-1/2
2

Max. Hanger
Spacing

2-11/16
2-15/16
3-5/16
3-9/16
4-1/16

3-1/4
3-1/4
3-1/4
4-1/2
5

5-1/2
6'
6-1/2
7
8

1.00

.200 DIA.

Ph: 1-800-333-0852
www.erico.com

91

92

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

Page 95

Page 96

Page 97

280

300

310

Page 98

Page 99

Page 100

255

255L

BC26

Page 101

Page 102

Page 103

200

200RS

547/548

Page 104

Page 105

Page 106

PH

PHSW

BC13

RS

Page 107

Page 108

Page 109

BC14

BC10

BC15

Ph: 1-800-333-0852
www.erico.com

93

BEAM CLAMPS

11

Page 109

Page 110

Page 111

BC09

315

PAR

Page 111

Page 112

Page 113

ET

RA

300C

Page 114

Page 114

Page 115

35RS

34SL

255C

Page 115

Page 116

Page 117

356

360

361

Page 118

363

94

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP 280


Universal Malleable Iron
Beam Clamp
Size Range: 3/8, 1/2, 5/8 and
3/4 rod sizes
Surface Finish: Black, Electro-zinc plated
Structural attachment to top or
bottom of metal beams, purlins,
channel, or angle iron

3/8, 1/2 rod sizes

Setscrew made of hardened steel


For retainer straps see Models 300C
and 035RS

Available with a HD finish by


special order
Conforms with Federal Specification
WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 19 & 23), install in accordance with
ANSI/MSS-SP-69

RS

Setscrew must be tightened and torqued


onto the sloped side of the I-beam
Part
Number

RS

Plain Finish
2800037PL
3/8
2800050PL
1/2
2800062PL
5/8
2800075PL
3/4
Electro-zinc Plated Finish
2800037EG
3/8
2800050EG
1/2
2800062EG
5/8
2800075EG
3/4

Set
Screw

Max. Rec.
Load (lbs)

3/4
3/4
3/4
3/4

7/8
7/8
7/8
1

3/8
3/8
1/2
1/2

500
950
950
950

3/4
3/4
3/4
3/4

7/8
7/8
7/8
1

3/8
3/8
1/2
1/2

500
950
950
950

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

Ph: 1-800-333-0852
www.erico.com

95

BEAM CLAMPS

11

BEAM CLAMP 300


Universal Ductile Iron Beam Clamp
Size Range: 3/8, 1/2, 5/8, 3/4
and 7/8 rod sizes
Surface Finish: Black, Electro-zinc plated
Structural attachment to top or
bottom of metal beams, purlins,
channel, or angle iron
Setscrew made of hardened steel
For retainer straps see Models
300C and 035RS

Available with a HD finish by


special order
A

Conforms with Federal Specification


WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 19 & 23), install in accordance
with ANSI/MSS-SP-69

RS

TOP

Setscrew must be tightened and


torqued onto the sloped side
of the I-beam
Part
Number

RS

Plain Finish
3000037PL*
3/8
3/4
3000050PL*
1/2
3/4
3000062PL
5/8
3/4
3000075PL
3/4
3/4
3000087PL
7/8
3/4
Electro-zinc Plated Finish
3000037EG* 3/8
3/4
3000050EG* 1/2
3/4
3000062EG
5/8
3/4
3000075EG
3/4
3/4
3000087EG
7/8
3/4

May be mounted
in either position

Set
Screw

Max. Rec.
Load (lbs)

1-1/8
1-1/8
1-1/8
1-1/8
1-1/8

3/8
7/16
3/8
3/8
3/8

Top
500
950
950
950
950

Bottom
250
760
760
760
760

1-1/8
1-1/8
1-1/8
1-1/8
1-1/8

3/8
7/16
3/8
3/8
3/8

500
950
950
950
950

250
760
760
760
760

BOTTOM

*Theses sizes are FM approved

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

7/16-14

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

8
(11)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

96

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP 310


Universal Ductile Iron Large
Opening Beam Clamp
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Black, Electro-zinc plated
Structural attachment to top or
bottom of metal beams, purlins,
channel, or angle iron
Setscrew made of hardened steel

For retainer straps see Models 300C


and 035RS

Available with a HD finish by


special order
RS

Conforms with Federal Specification


WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 19 & 23), install in accordance
with ANSI/MSS-SP-69

TOP

May be mounted
in either position

Setscrew must be tightened and


torqued onto the sloped side of the I-beam

BOTTOM
Part
Number
Plain Finish
3100037PL
3100050PL
Electro-zinc Plated
3100037EG
3100050EG

RS

Set
Screw

Max. Rec.
Load (lbs)

3/8
1/2
Finish
3/8
1/2

1-1/4
1-1/4

1
1

3/8
1/2

Top
500
950

Bottom
250
760

1-1/4
1-1/4

1
1

3/8
1/2

500
950

250
760

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

Ph: 1-800-333-0852
www.erico.com

97

BEAM CLAMPS

11

BEAM CLAMP 255


Malleable Iron Beam Clamp,
Non-adjustable
Size Range: 3/8, 1/2 and
5/8 rod sizes
Surface Finish: Black, Electro-zinc plated
Structural attachment to top or
bottom of metal beams, purlins,
channel, or angle iron
Setscrew made of hardened steel
For retainer straps see Models 255C
Conforms with Federal Specification
WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 23), install in accordance with
ANSI/MSS-SP-69

Setscrew must be tightened and


torqued onto the sloped side of
the I-beam
Part
Number

RS

Plain Finish
2550037PL
3/8
2550050PL
1/2
2550062PL
5/8
Electro-zinc Plated Finish
2550037EG
3/8
2550050EG
1/2
2550062EG
5/8

RS

Set
Screw

Max. Pipe Max. Rec.


Size
Load (lbs)

3/4
7/8
3/4
7/8
3/4 1-1/16

3/8
3/8
3/8

2
3-1/2
5

400
400
400

3/4
7/8
3/4
7/8
3/4 1-1/16

3/8
3/8
3/8

2
3-1/2
5

400
400
400

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

98

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP 255L


Malleable Iron Beam Clamp
with Locknut, Non-adjustable
Size Range: 3/8, 1/2 and 5/8
rod sizes
Surface Finish: Black, Electro-zinc plated
Structural attachment to top or
bottom of metal beams, purlins,
channel, or angle iron
Setscrew made of hardened steel
For retainer straps see Models 255C
Conforms with Federal Specification
WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 23), install in accordance with
ANSI/MSS-SP-69
Setscrew must be tightened and
torqued onto the sloped side of
the I-beam
Part
Number

RS

Plain Finish
255L0037PL
3/8
255L0050PL
1/2
255L0062PL
5/8
Electro-zinc Plated Finish
255L0037EG
3/8
255L0050EG
1/2
255L0062EG
5/8

RS

Set
Screw

Max. Pipe Max. Rec.


Size
Load (lbs)

3/4
7/8
3/4
7/8
3/4 1-1/16

3/8
3/8
3/8

2
3-1/2
5

400
400
400

3/4
7/8
3/4
7/8
3/4 1-1/16

3/8
3/8
3/8

2
3-1/2
5

400
400
400

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

Ph: 1-800-333-0852
www.erico.com

99

BEAM CLAMPS

11

BEAM CLAMP BC26


Universal Malleable Iron
Beam Clamp
Size Range: 1/4 rod size
Surface Finish: Electro-zinc plated
Structural attachment to top or
bottom of metal beams, purlins,
channel, or angle iron
Setscrew made of hardened steel
Includes a 1/4 threaded opening in
the back side of body
Setscrew must be tightened and
torqued onto the sloped side of
the I-beam
Part
Number

RS

Set
Screw

Max. Rec.
Load (lbs)

Electro-zinc Plated Finish


BC260025EG

1/4

15/16 13/16

1/4

Top

Bottom

250

100

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS
TOP

TOP

May be mounted
in either position

100

BOTTOM

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP 200


Steel C-clamp, Non-adjustable
Size Range: 3/8 rod size
Surface Finish: Black, Electro-zinc plated
Structural attachment to top or
bottom of metal beams, purlins,
channel, or angle iron
Setscrew made of hardened steel
For retainer straps see Models 255
and 255C
Conforms with Federal Specification
WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 23), install in accordance with
ANSI/MSS-SP-69

Setscrew must be tightened and


torqued onto the sloped side of
the I-beam
Part
Number

RS

Plain Finish
2000037PL
3/8
Electro-zinc Plated Finish
2000037EG
3/8

RS
B

Set
Screw

Max. Pipe Max. Rec.


Size
Load (lbs)

3/4

1-1/8

3/8

250

3/4

1-1/8

3/8

250

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

Ph: 1-800-333-0852
www.erico.com

101

BEAM CLAMPS

11

BEAM CLAMP 200RS


Steel Dual Purpose Strut/Beam
C-clamp, Non-adjustable
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Pre-galvanized Steel
Structural attachment to metal beams
and flanges to support strut and/or rod
Setscrew made of hardened steel
Setscrew must be tightened and
torqued onto the sloped side of
the I-beam
Part
Number

RS

Pre-galvanized Steel Finish


200RS375
3/8
200RS500
1/2

Set
Screw

5/8
5/8

1-1/2
1-1/2

3/8
1/2

Max. Pipe Max. Rec.


Size
Load (lbs)*
3-1/2
8

250
360

*NOTE: Load rating is per fastener with a 3X safety factor. Actual


installation must be evaluated to determine load on the individual fastener.
Recommended Torque** (for setscrews):
Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

102

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP 547/548


Steel C-clamp, Non-adjustable
Size Range: 3/8and 1/2 rod sizes
Surface Finish: Black
Designed for use with large-lip rolled
steel purlins to eliminate the need to
modify purlins for the standard
C-clamp
Setscrew made of hardened steel
Setscrew must be tightened and
torqued onto the sloped side of
the I-beam
NOTE: Designed for Z Purlins.
Part
Number
Plain Finish
5470037PL
5480050PL

Model
Number

RS

Set
Screw

Max. Rec.
Load (lbs)

547
548

3/8
1/2

1
1-1/8

1-5/16
1-1/4

3/8
1/2

250
250

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

Ph: 1-800-333-0852
www.erico.com

103

BEAM CLAMPS

11

PURLIN HANGER PH
Steel Purlin Clamp EG
Size Range: 1/4 and 3/8 rod sizes
Surface Finish: Electro-zinc plated
Structural attachment to bottom of
purlins and beams to support
threaded rod
Setscrew made of hardened steel
Installation screw torque: 30-inch pounds
UL Listed* for fire protection applications
(max. 3 Sch40 steel pipe)

*507P

**8N13

NOTE: Maximum flange thickness: 1/4

Maximum recommended load: C & Z purlins: 200 lbs.,


flat flange: 160 lbs.
Part
Number

RS

Electro-zinc Plated Finish


PH4**
1/4
PH6**
3/8
PH6FP*
3/8

B
(Min.)

Max. Rec.
Load (lbs)

3/8
3/8
3/8

3/4
3/4
3/4

See Note
See Note
200

* Includes jam nut for fire protection applications, UL Listed for


fire protection pipe (up to 3 Sch. 40 steel pipe) on purlin
**UL Listed as conduit and cable support, jam nut not included

Recommended Torque (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

B (FLANGE ENGAGEMENT)

104

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

PURLIN CLAMP PHSW


Steel Purlin Clamp with
Swivel EG
Size Range: 1/4 and 3/8 rod sizes
Surface Finish: Electro-zinc plated
Structural attachment to bottom of
purlins and beams to support
threaded rod
Swivel feature option for attachment
to purlins under sloped roofs
Setscrew made of hardened steel

*507P

Installation screw torque: 30-inch pounds

**8N13

UL Listed* for fire protection applications


(max. 3 Sch40 steel pipe)
NOTE: Maximum flange thickness: 1/4

Maximum recommended load: C & Z purlins:


200 lbs., flat flange: 160 lbs.
Part
Number

RS

Electro-zinc Plated Finish


PHSW4**
1/4
PHSW6**
3/8
PHSW6FP*
3/8

B
(Min.)

Max. Rec.
Load (lbs)

3/8
3/8
3/8

3/4
3/4
3/4

See Note
See Note
200

* Includes jam nut for fire protection applications, UL Listed for


fire protection pipe (up to 3 Sch. 40 steel pipe) on purlin
**UL Listed as conduit and cable support, jam nut not included

Recommended Torque (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

Ph: 1-800-333-0852
www.erico.com

105

B (FLANGE ENGAGEMENT)

BEAM CLAMPS

11

BEAM CLAMP BC13


Steel Beam Clamp, Non-adjustable
Size Range: 1/4, 5/16, 3/8, 1/2,
5/8, and 3/4 rod sizes
Surface Finish: Electro-zinc plated
Structural attachment to beams to
support threaded rod
Setscrew made of hardened steel
Setscrew must be tightened and
torqued onto the sloped side of
the I-beam
Part
Number

RS

Electro-zinc Plated Finish


BC130025EG
1/4
BC130031EG
5/16
BC130037EG
3/8
BC130050EG
1/2
BC130062EG
5/8
BC130075EG
3/4

Set
Screw

Max. Rec.
Load (lbs)

7/8
7/8
7/8
7/8
7/8
7/8

1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8

3/8
3/8
3/8
1/2
1/2
5/8

650
650
650
1100
1600
2400

Recommended Torque* (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

*Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

106

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP BC14


Steel Beam Clamp, Non-adjustable
Size Range: 1/4, 3/8, 1/2 and
5/8 rod sizes
Surface Finish: Electro-zinc plated
Structural attachment to beams to
support threaded rod
Setscrew made of hardened steel
Setscrew must be tightened and
torqued onto the sloped side of
the I-beam
Part
Number

RS

Electro-zinc Plated Finish


BC140025EG
1/4
1-21/32
BC140037EG
3/8
1-21/32
BC140050EG
1/2
1-21/32
BC140062EG
5/8
1-21/32

Set
Screw

Max. Rec.
Load (lbs)

1-5/8
1-5/8
1-5/8
1-5/8

3/8
3/8
1/2
1/2

800
800
1300
1900

Recommended Torque* (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

*Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

Ph: 1-800-333-0852
www.erico.com

107

BEAM CLAMPS

11

BEAM CLAMP BC10


Steel Beam Clamp, Adjustable
Size Range: 1/4, 5/16, 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Structural attachment to beams to support threaded rod
Setscrew made of hardened steel
Setscrew must be tightened and torqued onto the sloped
side of the I-beam
Part
Number

RS

Electro-zinc Plated Finish


BC100000EG 1/4, 5/16,
3/8, or 1/2

Set
Screw

Max. Rec.
Load (lbs)

3/4

3/8

See Note*

*Maximum recommended load: Position A 500 lbs


Position B 300 lbs

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

Position A

Position B

108

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP SWIVEL BC15


Beam Clamp Swivel for BC10
Size Range: 1/4, 3/8, and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Swivel attachment for use with BC10
Beam Clamp
Setscrew made of hardened steel
Setscrew must be tightened and
torqued onto the sloped side of
the I-beam
Part
Number

RS

Electro-zinc Plated Finish


BC101500EG 1/4, 3/8, 3/4
& 1/2

Set
Screw

Max. Rec.
Load (lbs)

3/8

500

Recommended Torque* (for setscrews):


Setscrew 1/4-20
Size
Foot-lbs
Nm

3/8-16

1/2-13

5/8-11

3/4-10

5
(7)

11
(15)

21
(28)

34
(46)

4
(5)

*Recognizing that torque wrenches are generally not used or


available on many job sites, the setscrew should be tightened so it
contacts the I-beam and then an additional 1/4 to 1/2 turn added.

RETAINER STRAP BC09


Beam Clamp Retainer Strap
for BC Series
Size Range: 9, 12, and 15 lengths
Surface Finish: Electro-zinc plated
Retainer strap for BC13 / BC14
beam clamps
Part
Number

Flange
Width

BC090900EG
BC091200EG
BC091500EG

9
12
15

6
9
12

#14 GA.

1 1/4"

FLANGE WIDTH

Ph: 1-800-333-0852
www.erico.com

109

RS

BEAM CLAMPS

11

PURLIN HANGER 315


Malleable Iron Purlin
Clamp Black
Size Range: 3/8 rod size
Surface Finish: Black, Electro-zinc plated
Structural attachment to lower flange
of metal beams or purlins with 45
flanges up to 2 long and 90 flanges
up to 1-1/2 high
Set screw made of hardened steel
Conforms with Federal Specification
WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 23); install in accordance with
ANSI/MSS-SP-69
Setscrew must be tightened and torqued
onto the sloped side of the I-beam
Part
Number

RS

Plain Finish
3150037PL
3/8
2
Electro-zinc Plated Finish
3150037EG
3/8
2

Set
Max.
Screw Pipe Size

Max. Rec.
Load (lbs)

1-1/2

3/8

400

1-1/2

3/8

400

Recommended Torque** (for setscrews):


Setscrew
Size
Foot-lbs
Nm

1/4-20

3/8-16

1/2-13

5/8-11

3/4-10

4
(5)

5
(7)

11
(15)

21
(28)

34
(46)

**Recognizing that torque wrenches are generally not used or available on


many job sites, the setscrew should be tightened so it contacts the I-beam
and then an additional 1/4 to 1/2 turn added.

RS

110

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

PARALLEL PIPE CLAMP PAR


Malleable Iron, HD
Size Range: 3/8 4
Surface Finish: Hot-dip galvanized
Structural attachments of pipe sizes
from 3/8 - 4 to beams with up to
3/4 flange thickness
Part
Number

Nominal
Pipe Size

PAR0037HD
PAR0050HD
PAR0075HD
PAR0100HD
PAR0125HD
PAR0150HD
PAR0200HD
PAR0250HD
PAR0300HD
PAR0350HD
PAR0400HD

3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4

3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4

A (MAX.)

EDGE TYPE PIPE CLAMP ET


Malleable Iron, HD
Size Range: 1/2 3
Surface Finish: Hot-dip galvanized
Structural attachments of pipe sizes
from 1/2 - 3 to beams with up to
3/4 flange thickness
Part
Number
ET0050HD
ET0075HD
ET0100HD
ET0125HD
ET0150HD
ET0200HD
ET0250HD
ET0300HD

Nominal
Pipe Size

1/2
3/4
1
1-1/4
1-1/4
2
2-1/2
3

3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4

Ph: 1-800-333-0852
www.erico.com

A (MAX.)

111

BEAM CLAMPS

11

RIGHT ANGLE PIPE


SUPPORT RA
Malleable Iron, HD
Size Range: 3/8 4
Surface Finish: Hot-dip galvanized
Structural attachments of pipe sizes
from 3/8 - 4 to beams with up to
3/4 flange thickness

Part
Number
RA0037HD
RA0050HD
RA0075HD
RA0100HD
RA0125HD
RA0150HD
RA0200HD
RA0250HD
RA0300HD
RA0350HD
RA0400HD

Nominal
Pipe Size

Max. Rec.
Load (lbs)

3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4

3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4

200
250
300
400
400
500
600
700
800
900
1000

A(MAX)

Pipe Size

112

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

RETAINER STRAP 300C


Beam Clamp Retainer Strap for
300 / 310 Series
Size Range: 3/8, 1/2, 5/8, 3/4
and 7/8 rod sizes
Surface Finish: Electro-zinc plated
Retainer strap for Model 300 / 310
beam clamps
Available in a HD finish by special order
NOTE: Field bend and use jam nut over hanger
rod to secure.

NOTE: Add 2 to width of flange to determine minimum


length strap required. Specify rod size and length.
Part
Number

RS

300C3706EG
300C3708EG
300C3710EG
300C3712EG
300C3714EG
300C3716EG
300C3718EG
300C5008EG
300C5010EG
300C5012EG
300C5014EG
300C5016EG
300C6206EG
300C6208EG
300C6210EG
300C6212EG
300C6214EG
300C7506EG
300C7508EG
300C7510EG
300C7514EG
300C8706EG
300C8708EG
300C8710EG
300C8714EG

3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8

6
8
10
12
14
16
18
8
10
12
14
16
6
8
10
12
14
6
8
10
14
6
8
10
14

15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
2
2
2
2

Ph: 1-800-333-0852
www.erico.com

113

BEAM CLAMPS

11

RETAINER STRAP 35RS


Beam Clamp Retainer Strap for
300 / 310 Series
Size Range: 3/8 or 1/2 rod sizes
Surface Finish: Electro-zinc plated
Retainer strap for Model 300 / 310
beam clamps
Available in a HD finish by special order
NOTE: Field bend and use jam nut over hanger
rod to secure.

NOTE: Add 2 to width of flange to determine minimum


length strap required. Specify rod size and length.
Part
Number
035RS0600EG
035RS0800EG
035RS1000EG
035RS1200EG
035RS1400EG
035RS1600EG
035RS1800EG
035RS2000EG

3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8

RS

or
or
or
or
or
or
or
or

6
8
10
12
14
16
18
20

15/16
15/16
15/16
15/16
15/16
15/16
15/16
15/16

1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2

RETAINER STRAP 34SL


Retrofit Beam Clamp Retainer
Strap for 300 / 310 Series
Size Range: 3/8 rod size
Surface Finish: Electro-zinc plated
Retrofit retainer strap for Model
300 / 310 beam clamps
NOTE: Field bend and use jam nut over
hanger rod to secure.

NOTE: Add 2 to width of flange to determine


minimum length strap required. Specify rod size
and length.
Part
Number

RS

034SL0600EG
034SL0800EG
034SL1000EG
034SL1200EG
034SL1400EG

3/8
3/8
3/8
3/8
3/8

6
8
10
12
14

1-3/8
1-3/8
1-3/8
1-3/8
1-3/8

B
A

FIELD
BEND

RSS

114

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

RETAINER STRAP 255C


Beam Clamp Retainer Strap
for 255 Series
Size Range: 3/8, 1/2, and 5/8
rod sizes
Surface Finish: Electro-zinc plated
Utilized when a retainer strap is
specified with Model #255 or #255L
beam clamps
NOTE: Field bend and use jam nut over hanger
rod to secure.
NOTE: Add 2 to width of flange to determine minimum length
strap required. Specify rod size and length.
Part
Number

RS

255C3706EG
255C3708EG
255C3710EG
255C3714EG
255C5006EG
255C5008EG
255C6210EG
255C6214EG

3/8
3/8
3/8
3/8
1/2
1/2
5/8
5/8

6
8
10
14
6
8
10
14

1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4

WOOD BEAM CLAMP 356


Steel Clamp for Wood Beams
Size Range: B x D joist sizes
Surface Finish: Black
Structural attachment for hanging
from a Truss Joist type of
wood beam
For use with Models #40 Eye Rod or
#37 Eye Socket

NOTE: B x C dimensions equal the joist size


B

Part
Number
3560100PL
3560200PL
3560300PL
3560400PL
3560500PL

Size

Max. Rec.
Load (lbs)

1
2
3
4
5

3-5/16
3-9/16
3-5/16
3-5/16
4-5/16

1-1/2
1-3/4
1-1/2
1-1/2
2-1/2

2-5/16
2-1/2
1-3/4
3-1/2
3-1/2

250
250
250
250
250

Ph: 1-800-333-0852
www.erico.com

115

BEAM CLAMPS

11

BEAM CLAMP 360


Malleable Iron Adjustable
Center-Load Beam Clamp
Size Range: 3/8, 1/2, 5/8, 3/4,
and 7/8 rod sizes
Surface Finish: Black
Structural attachment to support
hanger rod beneath the center of
a beam
Accommodates 2-3/8 thru 7 wide
beams with a maximum 0.60-inch flange thickness
Use with Model #26 extension piece (not included)
Conforms with Federal Specification WW-H-171 (Type 30),
Manufacturers Standardization Society ANSI/MSS-SP-58
(Type 30); install in accordance with ANSI/MSS-SP-69
NOTE: Available with an EG finish by special order
RS
3/8
1/2
5/8
3/4
7/8
RS
3/8
1/2
5/8
3/4
7/8

P/N 3600000PL
A=4
A=5
B
B

A=2-3/8
B

A=3
B

4-3/4
4-7/8
4-15/16
5-3/16
5-1/4

4-3/4
4-3/4
4-7/8
5-1/8
5-1/4

4-1/2
4-3/4
4-3/4
5
5-1/16

Max.
Pipe Size

Max. Rec.
Load (lbs)

7/8
15/16
1-3/8
1-3/8
1-1/4

2
3-1/2
5
6
12*

610
1130
1365
1365
1365

4-1/8
4-1/4
4-3/8
4-5/8
4-3/4

A=6
B

A=7
B

3-7/8
4
4
4-1/4
4-3/8

3-1/8
3-1/4
3-15/16
3-9/16
3-5/8

*Reduced hanger spacing is required when supporting 10 and 12 pipe


A

B
C

RS

116

Ph: 1-800-333-0852
www.erico.com

BEAM CLAMPS

11

BEAM CLAMP 361


Steel Center-Load Beam Clamp
Size Range: 4 thru 8 wide beam
Surface Finish: Black
Structural attachment to support
hanger rod beneath the center of a
beam using Models #40 Eye Rod or
#35 Eye Nut
Conforms with Federal Specification
WW-H-171 (Type 21), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 21); install in accordance with
ANSI/MSS-SP-69
Part
Number*
361024050PL
361025062PL
361026075PL
361027087PL
361028087PL
361054050PL
361055062PL
361056075PL
361057087PL
361058087PL

BS

1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4

x
x
x
x
x
x
x
x
x
x

1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4

A Rec.
Flange
Thickness

Max. Rec.
Load (lbs)

1/2
5/8
3/4
7/8
7/8
1/2
5/8
3/4
7/8
7/8

4
5
6
7
8
4
5
6
7
8

5/8
5/8
5/8
5/8
5/8
7/8
7/8
7/8
7/8
7/8

700
700
700
700
700
1500
1500
1500
1500
1500

*These part numbers encompass only types 2 and 5 of this product offering

B
A

BS

Ph: 1-800-333-0852
www.erico.com

117

BEAM CLAMPS

11

BEAM CLAMP 363


Adjustable Steel Center-Load
Beam Clamp
Size Range: 3/8, 1/2, 5/8, and
3/4 rod sizes
Surface Finish: Black
Structural attachment to support
hanger rod under beams of various
flange width
Conforms with Federal Specification WW-H-171 (Type 54),
Manufacturers Standardization Society ANSI/MSS-SP-58
(Type 27), install in accordance with ANSI/MSS-SP-69
NOTE: Available with an EG finish by special order
Part
Number

RS

3630037PL
3630050PL
3630062PL
3630075PL

3/8
1/2
5/8
3/4

2-3/4
2-3/4
2-3/4
2-3/4

5/8
5/8
5/8
5/8

C
3-1/2
3-1/2
3-1/2
3-1/2

D
-

8
8
8
8

11/16
13/16
15/16
15/16

Max
Max. Rec.
Pipe Size Load (lbs)
2
4
8
8

300
700
1000
1000

A
D

RS

118

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

Page 121

Page 121

Page 122

365M

365

355

Page 123

Page 124

Page 125

355N

370A

37

Page 126

Page 127

Page 128

38

325

326

Page 129

Page 130

Page 131

327

328

319

Ph: 1-800-333-0852
www.erico.com

119

12

STRUCTURAL ATTACHMENTS

Page 131

Page 132

Page 133

340

320L / 320W

348

Page 134

Page 134

Page 135

350

351

352

Page 136

Page 137

Page 137

353

4TI / 6TI

AF

Page 138

Page 138

VF

VAFT

120

12

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

CEILING OR WALL
PLATE 365M
Malleable Iron Ceiling or
Wall Plate
Size Range: 3/8 or 1/2 rod size
Surface Finish: Electro-zinc plated,
Black, Copper-colored coating
(for identification purposes only)
Structural attachment to support
hanger rod from a ceiling or a wall

NOTE: Follow fastener manufacturers recommended


shear and pull-out strength when fastening to the structure.
Part
Number

RS

Plain Finish
365M0037PL
3/8
365M0050PL
1/2
Electro-zinc Plated
365M0037EG
3/8
365M0050EG
1/2
Copper-colored
365M0037CP
3/8
365M0050CP
1/2

Max.
Pipe Size

Max. Rec.
Load (lbs)

15/32
15/32

2
3-1/2

180
180

15/32
15/32

2
3-1/2

180
180

15/32
15/32

2
3-1/2

180
180

RS

1-15/16"

5/16" DIA.

CEILING OR WALL
PLATE 365
Steel Ceiling or Wall Plate
Size Range: 3/8 rod size
Surface Finish: Electro-zinc plated,
Black, Copper-colored coating
(for identification purposes only)
Structural attachment to support
hanger rod from a ceiling or a wall
NOTE: Follow fastener manufacturers recommended
shear and pull-out strength when fastening to the structure.
Part
Number

RS

Plain Finish
3650037PL
3/8
Electro-zinc Plated
3650037EG
3/8
Copper-colored
3650037CP
3/8

Ph: 1-800-333-0852
www.erico.com

Max.
Pipe Size

Max. Rec.
Load (lbs)

5/16

100

5/16

100

5/16

100

121

2-1/4"
11/32" DIA.

RS

STRUCTURAL ATTACHMENTS

12

CONCRETE INSERT 355


Steel Insert Plate
Size Range: Maximum 7/8 rod size
Surface Finish: Electro-zinc plated, Black
Structural attachment in all grades
of concrete
Knockout keeps interior empty
during pour

3/8, 1/2, 5/8, 3/4 in.


rod for pipe size 6 in. max.

Allows for horizontal rod adjustment


up to 1-1/4

Installation: Place knockout side down


on concrete form and nail in place.
Wire 12 piece of #4 reinforcing rod on both sides.
After concrete pour, knockout can be removed with
a screwdriver.
Use with Model #355N Insert Nut (for UL Listing) or
Models: #Nut, #SPRA, #SPRC strut nuts. Rod should
be threaded through the nut until it tightens against
the top of the insert
Conforms with Federal Specification WW-H-171
(Type 19), Manufacturers Standardization Society
ANSI/MSS-SP-58 (Type 18); install in accordance with
ANSI/MSS-SP-69
Part
Number

Max.
RS

Plain Finish
3550000PL
7/8
Electro-zinc Plated
3550000EG
7/8

Max.
Pipe Size

Max. Rec.
Load (lbs)

1-5/8

3-9/16

10

1200

1-5/8

3-9/16

10

1200

"Re" rod here

Nail Holes (4)

Knock Out

122

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

CONCRETE INSERT NUT 355N


Steel Insert Nut
Size Range: 1/4, 3/8, 1/2, 5/8,
3/4, and 7/8 rod sizes
Surface Finish: Electro-zinc plated, Black
Hanger rod attachment to be installed
inside of the Model #355 Concrete
Insert
Installation: See Model #355
Conforms with Federal Specification
WW-H-171 (Type 19), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 18); install in accordance with
ANSI/MSS-SP-69
Part
Number
Plain Finish
355N0025PL
355N0037PL
355N0050PL
355N0062PL
355N0075PL
355N0087PL*
Electro-zinc Plated
355N0025EG
355N0037EG
355N0050EG
355N0062EG
355N0075EG
355N0087EG*

RS

Max.
Pipe Size

Max. Rec.
Load (lbs)

1/4
3/8
1/2
5/8
3/4
7/8

N/A
4
8
8
8
10

240
610
1130
1200
1200
1200

1/4
3/8
1/2
5/8
3/4
7/8

N/A
4
8
8
8
10

240
610
1130
1200
1200
1200

1 41 "

*Reduced support spacing is required

Ph: 1-800-333-0852
www.erico.com

1 41 "

123

RS

STRUCTURAL ATTACHMENTS

12

CONCRETE INSERT 370A


Steel Insert Plate and Rod
Size Range: 3/8, 1/2, 5/8, 3/4,
and 7/8 rod sizes
Surface Finish: Black
Structural attachment to support
hanger rod from metal deck-poured
concrete ceiling where adjustment
for concrete thickness is needed
Threaded rod supplied with an EG finish
NOTE: Maximum load ratings are dependent on many factors, which
include, but are not limited to: type of concrete, depth of slab, location
of anchor in slab, and depth of anchor in slab. Consult a professional
engineer regarding anchor positioning.
Part
Number
370A0037PL
370A0050PL
370A0062PL
370A0075PL
370A0087PL

RS

Plate
Size

Max. Rec.
Load (lbs)

3/8 x 8
1/2 x 8
5/8 x 8
3/4 x 12
7/8 x 12

1-1/4 x 10
1-1/4 x 10
1-1/4 x 10
2 x 5
3 x 8

240
240
610
610
1130

3/4" thru 7/8"


3/8" thru 5/8"

5.0" MIN.

7.0"

8-3/8"

RS

Appropriate size
UNC-2B Jam Nut
recommended, but
not supplied

RS

Bottom plate is threaded to


allow vertical adjustment of
the anchor rod.

124

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

ROD HANGER 37
Steel Eye Socket
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Structural attachment used to join
hanger rod to a structure

NOTE:
1. Fastener sizes for 3/8 rod size
a. Thru 2 pipe, two Model #43
Wood Drive Screws
b. Thru 4 pipe, one Model #42
1/2 x 3 Lag Screw
2. Fastener size for 1/2 rod size: thru 8
pipe, one Model #42 5/8 x 3 Lag Screw
3/4 thru 4 pipe

2-1/2 thru 6 pipe

E
B

RS

RS
3/8"

1/2"

Part
Number

RS

0370037EG
0370050EG

3/8
1/2

2-1/4
2-3/4

1/2
11/16

1/4
None

1-1/8
1-3/16

1-1/8
1-1/2

*Load rating dependent on wood structure strength

Ph: 1-800-333-0852
www.erico.com

125

Max.
Max.
Pipe Rec. Load
Size
(lbs)*
4
250
8
760

STRUCTURAL ATTACHMENTS

12

ROD HANGER 38
Offset Steel Eye Socket
Size Range: 3/8 rod size
Surface Finish: Electro-zinc plated
Structural attachment used to join
hanger rod to a structure
Provides full vertical rod adjustment
NOTE:
1. Fastener sizes for 3/8 rod size
a. Thru 2 pipe, two Model #43 Wood Drive Screws
b. Thru 4 pipe, one Model #42 1/2 x 3 Lag Screw
Part
Number

RS

0380037EG 3/8

3-1/4

1/2

1/4 1-3/16 1-1/8

Max.
Pipe Size
4

Max. Rec.
Load (lbs)
250

*Load rating dependent on wood structure strength


3/4 thru 4 pipe

C
B
A

3/4"

RS

126

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

ROD HANGER 325


Steel Side Beam Attachment
Size Range: 3/8, 1/2, 5/8, 3/4,
7/8, and 1 rod sizes
Surface Finish: Electro-zinc plated, Black
Structural attachment fastened to
the wall or the side of a joist to
support hanger rod
Conforms with Federal Specification
WW-H-171 (Type 35), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 34); install in accordance with
ANSI/MSS-SP-69
NOTE: Follow fastener manufacturers recommended

shear and pull-out strength when fastening to the structure.

Part
Number

RS

Plain Finish
3250037PL
3/8
3250050PL
1/2
3250062PL
5/8
3250075PL
3/4
3250087PL
7/8
3250100PL
1
Electro-zinc Plated
3250037EG
3/8
3250050EG
1/2
3250062EG
5/8
3250075EG
3/4
3250087EG
7/8
3250100EG
1

Max. Rec. Load (lbs)


w/ Lag Screw w/ Bolt to Steel

1-5/32
1-5/32
1-3/8
1-3/4
2-1/2
2-1/2

7/16
9/16
11/16
13/16
15/16
1-1/16

650
650
850
900
900
900

1150
1150
2000
3500
3600
3700

1-5/32
1-5/32
1-3/8
1-3/4
2-1/2
2-1/2

7/16
9/16
11/16
13/16
15/16
1-1/16

650
650
850
900
900
900

1150
1150
2000
3500
3600
3700

A
A

Ph: 1-800-333-0852
www.erico.com

127

STRUCTURAL ATTACHMENTS

12

ROD HANGER 326


Universal Steel Side Beam
Attachment
Size Range: 3/8 rod size
Surface Finish: Electro-zinc plated, Black
Structural attachment fastened to
the wall or the side of a joist to
support hanger rod, where either
3/8 or 1/2 fasteners can be used
to reduce inventories
Conforms with Federal Specification
WW-H-171 (Type 35), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 34); install in accordance with
ANSI/MSS-SP-69
NOTE: Follow fastener manufacturers recommended
shear and pull-out strength when fastening to the structure.
Part

RS

Max. Rec. Load (lbs)

Number

w/ Lag Screw

w/ Bolt to Steel

Plain Finish
3260037PL
3/8
Electro-zinc Plated
3260037EG
3/8

1-5/32

7/16

560

620

1-5/32

7/16

560

620

9/32" DIA.
(4 places)
B
9/16" DIA.

A
A

128

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

ROD HANGER 327


Malleable Iron Side Beam
Connector
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated, Black
Pre-threaded structural attachment
fastened to wall or the side of a joist
to support hanger rod where two
#43 Wood Drive Screws are necessary
for proper support
NOTE: Follow fastener manufacturers recommended
shear and pull-out strength when fastening to the structure.
Part
Number

RS

Plain Finish
3270037PL
3/8
3270050PL
1/2
Electro-zinc Plated
3270037EG
3/8
3270050EG
1/2

Max. Rec.
Load (lbs)*

2-3/8
2-3/4

15/16
1-5/16

#14
#16

250
480

2-3/8
2-3/4

15/16
1-5/16

#14
#16

250
480

*Load rating dependent on wood structure strength

C
Drive Screw

A
B

RS

Ph: 1-800-333-0852
www.erico.com

129

STRUCTURAL ATTACHMENTS

12

ROD HANGER 328


Threaded Steel Side Beam
Connector
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated, Black
Pre-threaded structural attachment
fastened to wall or the side of a joist
to support hanger rod
1 thru 4 pipe

Conforms with Federal Specification


WW-H-171 (Type 35), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 34); install in accordance with
ANSI/MSS-SP-69

NOTE: Follow fastener manufacturers recommended


shear and pull-out strength when fastening to the structure.
Part

RS

Number
Plain Finish
3280037PL
3280050PL
Electro-zinc Plated
3280037EG

Max. Rec. Load (lbs)


w/ Lag Screw

w/ Bolt to Steel

3/8
1/2

560
560

620
620

3/8

560

620

1"
13/32" DIA.
17/32" DIA.

2-9/16"

Threaded hole

1-1/4"

RS

130

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

ROD HANGER 319


Steel Return Line Angle Bracket
Size Range: 2-5/8 thru 3-5/8
from wall
Surface Finish: Black
Structural wall attachment to support
hanger rod designed to keep the
centerline of the pipe either 2, 3,
or 4 away from the wall
NOTE: Follow fastener manufacturers recommended shear
and pull-out strength when fastening to the structure
Part
Number
3190100PL
3190200PL

2-5/8
3-5/8

Max. Rec.
Load (lbs)

3-5/8
4-5/8

B
9/16" DIA.

180
180
A

WASHER PLATE 340


Square Steel Washer
Size Range: 3/8, 1/2, 5/8, 3/4,
and 7/8 rod sizes
Surface Finish: Electro-zinc plated
Square steel washer plate used on
top of channel or angle for hanger
rod or U-bolt attachment
Part
Number
340A2503PL
340B2503PL
340C3703PL
340D3704PL
340E5004PL

RS

3/8
1/2
5/8
3/4
7/8

7/16
9/16
11/16
13/16
15/16

1/4
1/4
3/8
3/8
1/2

3
3
3
4
4

C
B

C
Ph: 1-800-333-0852
www.erico.com

131

STRUCTURAL ATTACHMENTS

12

ROD HANGER 320L / 320W


Welded Beam Attachment
Size Range: 3/8 thru 2-1/2 rod sizes
Surface Finish: Black
Hanger rod attachment to be welded
to the bottom of a beam where large
rod sizes and substantial loads exist
Install in position A if rigid hanger
rod and vertical adjustment are necessary
Install in position B when a rod attachment is desired, such as
Model #40 Eye Rod or #35 Welded Eye Nut
Based on the allowable stresses shown in ANSI Code for Pressure Piping
Conforms with Federal Specification WW-H-171 (Type 22), Manufacturers
Standardization Society ANSI/MSS-SP-58 (Type 22); install in accordance
with ANSI/MSS-SP-69
Position A
Part
Number

RS

Max. Rec.
Load (lbs) 650 F

320L0037PL
320L0050PL
320L0062PL
320L0075PL
320L0087PL
320L0100PL
320L0125PL
320L0150PL
320L0175PL
320L0200PL
320L0225PL
320L0250PL

3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2 *
2-1/4
2-1/2

3/4
7/8
1
1-1/4
1-3/8
1-5/8
2
2-7/16
2-5/16
3-1/4
3-1/2
3-3/4

2-1/8
2
2
1-7/8
2-7/8
2-7/8
3
4-1/16
4-13/16
5
6
6

1-9/16
1-5/8
1-5/8
1-7/8
2
2
2-1/2
3
3-3/4
3-3/4
4-1/4
4-1/2

610
1130
1810
2710
3770
4960
8000
11630
15700
20700
27200
33500

*
*
*
*
*

C
B

A
RS
POSITION A

*1-1/4 and larger are weldments

Position B
Part
Number

320W0037PL
320W0050PL
320W0062PL
320W0075PL
320W0087PL
320W0100PL
320W0112PL
320W0150PL
320W0175PL
320W0200PL
320W0225PL
320W0250PL

RS

3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/2 *
1-3/4 *
2 *
2-1/4 *
2-1/2 *

2
2
2
2
3
3
3
4
5
5
6
6

B
1/2 x 2-1/2
5/8 x 2-1/2
5/8 x 2-3/4
7/8 x 4
1 x 4
1-1/8 x 5
1-1/4 x 5
1-5/8 x 5-3/4
1-7/8 x 6-7/8
2-1/4 x 6-7/8
2-1/2 x 7-3/8
2-3/4 x 7-5/8

C
1-9/16
1-5/8
1-5/8
1-7/8
2
2
2-1/4
3
3-3/4
3-3/4
4-1/4
4-1/2

Max. Rec.
Load (lbs) 650 F
610
1130
1810
2710
3770
4960
6480
11630
15700
20700
27200
33500

C
POSITION B

*1-1/4 and larger are weldments

132

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

WELDED BRACKET 348


Light Duty Welded
Wall Bracket
Size Range: Maximum 1/2 rod size
Surface Finish: Black
Wall attachment to suspend 2
or smaller static piping
NOTE: Follow fastener manufacturers recommended shear
and pull-out strength when fastening to the structure
Part
Number

Size

RS

3480100PL
3480200PL
3480300PL

1
2
3

1/2
1/2
1/2

9
13
19

8
12
18

6-1/2 9/16
10-1/2 9/16
16-1/2 9/16

Max. Rec.
Load (lbs)

2
2
2

750
750
750

E
C
D
RS

Ph: 1-800-333-0852
www.erico.com

133

STRUCTURAL ATTACHMENTS

12

ROD CLIP 350


Threaded Rod Clip for
Welded Brackets
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Black
Allows hanger rod to be adjusted
further from or closer to the
structural member
Clip size determined by pipe size
NOTE: If using bracket with clip, slip clip over

upper arm of bracket and run a rod through the


two plates.

B
RS

Part
Number

Pipe
Size

RS

3500037PL
3500050PL

3/4 to 2
2-1/2 to 3-1/2

3/8
1/2

3-13/16
4-1/16

1-3/16
1-7/16

21/32
23/32

WELDED BRACKET 351


Light Duty Welded Wall Bracket
Size Range: Maximum 1/2 rod size
Surface Finish: Black
Designed to suspend hanger rod for
support of light loads under 750 lbs.
and normally used in conjunction with
Model #350 Rod Clip
Determine bracket size by dimension
of standard bracket most suitable to
the installation

Conforms with Federal Specification


WW-H-171 (Type 31), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 31); install in accordance with
ANSI/MSS-SP-69

2"

B
A

D
RS

NOTE: Follow fastener manufacturers

recommended shear and pull-out strength


when fastening to the structure
Part
Number

RS

3510100PL
3510200PL
3510300PL

1/2
1/2
1/2

9
13
19

6-1/2
10-1/2
16-1/2

8
12
18

13/16
13/16
13/16

134

Max. Pipe Max. Rec.


Size
Load (lbs)
3-1/2
3-1/2
3-1/2

600
600
600

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS

12

WELDED BRACKET 352


Medium Duty Welded
Wall Bracket
Surface Finish: Black
Wall attachment to support or
suspend static piping
Recommended to support loads no
greater than 1500 lbs.
Conforms with Federal Specification
WW-H-171 (Type 32), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 32); install in accordance with
ANSI/MSS-SP-69
NOTE: Follow fastener manufacturers recommended shear
and pull-out strength when fastening to the structure
Part
Number

Size

Max. Rec.
Load (lbs)

3520100PL
3520200PL
3520300PL

1
2
3

18
24
30

15-1/2
21-1/2
27-1/2

12
18
24

13/16
13/16
13/16

4
4-1/2
5

1500
1500
1500

C
1-1/4"

2-1/2"

1"

Ph: 1-800-333-0852
www.erico.com

135

STRUCTURAL ATTACHMENTS

12

WELDED BRACKET 353


Heavy Duty Welded
Wall Bracket
Surface Finish: Black
Wall attachment to support or
suspend static piping
Recommended to support loads no
greater than 3000 lbs.
Conforms with Federal Specification
WW-H-171 (Type 33), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 33); install in accordance with
ANSI/MSS-SP-69
NOTE: Follow fastener manufacturers recommended shear
and pull-out strength when fastening to the structure
Part
Size
Number
3530100PL
3530200PL
3530300PL
3530400PL
3530500PL
3530600PL

1
2
3
4
5
6

Max. Rec.
Load (lbs)

18
24
30
36
42
50

1-1/2
1-3/8
1-1/4
1-1/2
1-1/2
2

7/8
1
1-1/8
1-1/2
1-1/2
1-1/2

15-1/4
21-3/8
27-1/2
33-1/4
39
46

12
18
24
30
36
42

13/16
15/16
1-1/16
1-1/16
1-1/16
1-1/16

4
5
5
5
6
6

3000
3000
3000
3000
3000
3000

B
C

D
A

136

1"

Ph: 1-800-333-0852
www.erico.com

STRUCTURAL ATTACHMENTS
ROD CLIP 4TI/6TI
Hammer-on Rod Clip
Size Range: 1/4 and 3/8 rod sizes
Surface Finish: CADDY COAT Black
Used to support 1/4 and 3/8
threaded rod from beam flanges
1/8 thru 3/4 thick
Installation: Hammer over the flange,
insert rod, and adjust to desired length
Part
Number
4TI24
4TI58
4TI912
6TI24
6TI58
6TI912

Flange
Thickness

RS

1/8 - 1/4
5/16 - 1/2
9/16 - 3/4
1/8 - 1/4
5/16 - 1/2
9/16 - 3/4

1/4-20
1/4-20
1/4-20
3/8-16
3/8-16
3/8-16

Finish
CC
CC
CC
CC
CC
CC

Black
Black
Black
Black
Black
Black

Load
Limit (lbs.)
200
200
200
200
200
200

RS

ROD CLIP AF
(ANGLED FLANGE)
Hammer-on Z Purlin Rod Clip
Size Range: 1/4 and 3/8 rod sizes
Surface Finish: CADDY COAT Black
Used to support 1/4 and 3/8
threaded rod from purlin beam
flanges 1/16 thru 1/4 thick
Installation: Hammer-on or install
from the floor with the VAFT tool
Part
Number
AF144TI
AF146TI

Flange
Thickness

RS

Finish

Load
Limit (lbs.)

1/16 - 1/4
1/16 - 1/4

1/4-20
3/8-16

CC Black
CC Black

100
100

RS

Ph: 1-800-333-0852
www.erico.com

137

12

STRUCTURAL ATTACHMENTS

12

ROD CLIP VF
(VERTICAL FLANGE)
Hammer-on C Purlin Rod Clip
Size Range: 1/4 and 3/8 rod sizes
Surface Finish: CADDY COAT Black
Used to support 1/4 and 3/8
threaded rod from purlin beam
flanges 1/16 thru 1/4 thick
Installation: Hammer-on or install
from the floor with the VAFT tool
Part
Number
VF144TI
VF146TI

Flange
Thickness

RS

Finish

Load
Limit (lbs.)

1/16 - 1/4
1/16 - 1/4

1/4-20
3/8-16

CC Black
CC Black

160
160

RS

INSTALLATION TOOL VAFT


AF & VF Installation Tool
Installation tool for VF & AF assemblies
Used to install the AF or VF rod clips
from the floor

138

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13

Page 141

Page 142

Page 143

605

610

615

RS

Page 144

Page 145

Page 146

617

619

620

Page 147-149

Page 147-149

Page 150

ROL12

ROL13

ROL14

Page 151

Page 152-153

Page 154-155

ROL15

650

651

Ph: 1-800-333-0852
www.erico.com

139

SUPPORTS, GUIDES & ROLLERS 13

Page 156

Page 157

Page 158

721

722

723

Page 159

724

140

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


PIPE ROLLER 605
Two Rod Roller Hanger
Size Range: 2-1/2 thru 30
Surface Finish: Black
Suspends pipe from two rods where
longitudinal movement in pipe may
occur due to expansion or contraction
Conforms with Federal Specification
WW-H-171 (Type 42), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 41); install in accordance with
ANSI/MSS-SP-69
NOTE: Roll and sockets are cast iron and axle is carbon steel,
available with Electro-zinc plated finish by special order
Part
Number
6050250PL
6050300PL
6050350PL
6050400PL
6050500PL
6050600PL
6050800PL
6051000PL
6051200PL
6051400PL
6051600PL
6051800PL
6052000PL
6052400PL
6053000PL

Pipe
Size

RS

Max. Rec.
Load (lbs)

2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30

1/2
1/2
1/2
5/8
5/8
3/4
7/8
7/8
7/8
1
1
1
1-1/4
1-1/2
1-1/2

3-1/4
3-9/16
3-7/8
4-3/8
5
5-13/16
7-3/16
8-7/16
9-5/8
10-7/8
12
13-1/16
14-9/16
17-3/8
20-15/16

4-7/8
5-5/8
6-1/8
6-11/16
7-15/16
9-9/16
12
14
15-3/4
17-5/8
19-5/16
21-5/8
24-1/8
28-3/8
35-3/8

1-13/16
1-13/16
1-13/16
2-1/4
2-1/4
2-5/8
3-1/16
3-1/16
3-3/16
3-1/2
3-9/16
3-9/16
4-5/16
4-15/16
5-9/16

660
700
750
750
750
1070
1350
1730
2400
3130
3970
4200
4550
6160
7290

RS

A
C

Ph: 1-800-333-0852
www.erico.com

141

SUPPORTS, GUIDES & ROLLERS 13


PIPE ROLLER 610
One Rod Roller Hanger
Size Range: 2-1/2 thru 24
Surface Finish: Black
Suspend pipe from a single hanger
rod where longitudinal movement
may occur in the pipe due to
expansion or contraction
Conforms with Federal Specification
WW-H-171 (Type 44), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 43); install in accordance with
ANSI/MSS-SP-69
NOTE: Yoke and axle are carbon steel and roll is cast iron,
available with Electro-zinc plated finish by special order
Part
Number
6100250PL
6100300PL
6100350PL
6100400PL
6100500PL
6100600PL
6100800PL
6101000PL
6101200PL
6101400PL
6101600PL
6101800PL
6102000PL
6102400PL

Pipe
Size

RS

Max. Rec.
Load (lbs.)

2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24

1/2
1/2
1/2
5/8
5/8
3/4
7/8
7/8
7/8
1
1
1
1-1/4
1-1/4

6-3/8
7
7-11/16
8-7/16
10-3/16
11-7/16
13-15/16
16-3/8
18-7/8
20-7/8
22-7/16
25-3/4
27
32-7/16

225
310
390
475
685
780
780
965
1200
1200
1200
1400
1600
1600

RS

142

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


PIPE ROLLER 615
Pipe Roller Support
Size Range: 2-1/2 thru 24
Surface Finish: Black
Support pipe from a substructure or
structural member where longitudinal
movement may occur due to
expansion or contraction
Conforms with Federal Specification
WW-H-171 (Type 45), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 44); install in accordance with
ANSI/MSS-SP-69
NOTE: Chair and axle are carbon steel and roll is cast iron,
available with Electro-zinc plated finish by special order
Part
Number

Pipe
Size

6150250PL
6150300PL
6150350PL
6150400PL
6150500PL
6150600PL
6150800PL
6151000PL
6151200PL
6151400PL
6151600PL
6151800PL
6152000PL
6152400PL

2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24

A
3-1/2
4
4-5/8
5-3/16
6
6-3/4
8-1/4
9-15/16
11-5/8
13
14-9/16
15-15/16
17-1/8
20-9/16

Max. Rec.
Load (lbs)

1-1/4
4
1-7/8 3/8 x 1-1/4
2
4-5/8
2-1/4 3/8 x 1-1/4
2
5-3/8
2-5/8 3/8 x 1-1/4
2
5-7/8
2-7/8 1/2 x 1-1/2
3
6-15/16 3-1/2 1/2 x 1-1/2
3-1/8
8
4
1/2 x 1-1/2
3-3/8
10
5-1/4 5/8 x 1-3/4
5-1/4 12-1/2 6-5/16 5/8 x 1-3/4
5-1/2
14
7-1/2 5/8 x 1-3/4
5-3/4 15-7/8
8-3/8 5/8 x 1-3/4
8
17-7/8 9-7/16
5/8 x 2
9-1/2
20
10-7/16
5/8 x 2
10
22
11-1/2 3/4 x 2-1/4
12
26-1/8 13-15/16 3/4 x 2-1/4

600
600
600
700
700
1000
1300
1300
2300
3000
4000
4000
4000
4000

Ph: 1-800-333-0852
www.erico.com

143

SUPPORTS, GUIDES & ROLLERS 13


PIPE ROLLER 617
Pipe Roll Stand with Steel Frame
Size Range: 3-1/2 thru 42
Surface Finish: Black
Support pipe from a substructure or
structural member where longitudinal
movement may occur due to
expansion or contraction
Conforms with Federal Specification
WW-H-171 (Type 45), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 44); install in accordance with
ANSI/MSS-SP-69
NOTE: Frame and axle are carbon steel and roll is cast iron
Part
Number
6170350PL
6170600PL
6171000PL
6171400PL
6172000PL
6172400PL
6173000PL
6174200PL

Pipe
Size

3-1/2
6
10
14
20
24
30
42

4-3/8
6-1/16
9-13/16
12
15-5/8
17-3/4
21-7/8
28-7/8

2-5/8
4-1/2
1-1/2
4
5-3/4
2-1/4
6-3/8
8-1/4
4
8-1/8 10-9/16 5-3/4
11-3/8 11-3/4
7
13-3/8 12-3/4 7-5/8
16-3/4 16-1/4
10
23-1/8 19-1/2
12

Max. Rec.
Load (lbs)

9/16
9/16
11/16
13/16
13/16
13/16
1-1/16
1-5/16

390
950
2100
3075
4980
6100
7500
12000

E
C

144

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


PIPE ROLLER 619
Adjustable Pipe Roll Stand
with Steel Frame
Size Range: 3-1/2 thru 42
Surface Finish: Black
Support pipe from a substructure or
structural member where longitudinal
movement may occur due to
expansion or contraction
Vertical adjustment is provided by
adjusting bolts on each corner
Conforms with Federal Specification
WW-H-171 (Type 47), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 46); install in accordance with
ANSI/MSS-SP-69
NOTE: Frame and axle are carbon steel and roll is cast iron
Part
Number

Pipe
Size

6190350PL 3-1/2 5-1/16 2-5/8


5
1-1/2 9/16
6190600PL
6
6-3/4
4
6-1/4 2-1/4 9/16
6191000PL 10 10-11/16 6-3/8 8-3/4
4
11/16
6191400PL 14 12-15/16 8-1/8
11 5-3/4 13/16
6192000PL 20 16-11/16 11-3/8 12-1/4 7
13/16
6192400PL 24 18-13/16 13-3/8 13-1/4 7-5/8 13/16
6193000PL 30 23-1/16 16-3/4 16-3/4 10 1-1/16
6194200PL 42 30-1/4 23-1/8 20
12 1-5/16

Max. Rec.
Load (lbs)

1-3/8
1-3/8
2-1/2
2-7/8
3-1/8
3-1/8
3-7/8
4-1/2

390
950
2100
3075
4980
6100
7500
12000

A
F

D
C

Ph: 1-800-333-0852
www.erico.com

145

SUPPORTS, GUIDES & ROLLERS 13


PIPE ROLLER 620

RS

Adjustable Pipe Roll Support


Size Range: 2-1/2 thru 30

Surface Finish: Black

Support pipe from a


substructure or structural
member where longitudinal
movement may occur due
to expansion or contraction
and where vertical adjustment
of up to 6 may be necessary

Conforms with Federal Specification


WW-H-171 (Type 42), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 41); install in accordance with
ANSI/MSS-SP-69
NOTE: Roll and sockets are cast iron and axle is carbon steel, available
with Electro-zinc plated finish by special order
Part
Number
6200250PL
6200300PL
6200350PL
6200400PL
6200500PL
6200600PL
6200800PL
6201000PL
6201200PL
6201400PL
6201600PL
6201800PL
6202000PL
6202400PL
6203000PL

Pipe
Size

RS

Max. Rec.
Load (lbs)

2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24
30

1/2
1/2
1/2
5/8
5/8
3/4
7/8
7/8
7/8
1
1
1
1-1/4
1-1/2
1-1/2

12
12
12
12
12
12
12
12
12
12
18
18
18
24
24

1-7/8
2-1/4
2-5/8
2-7/8
3-1/2
4
5-1/4
6-5/16
7-7/16
8-3/8
9-7/16
10-7/16
11-1/2
13-15/16
17-1/4

4-7/8
5-5/8
6-1/8
6-11/16
7-15/16
9-9/16
12
14
15-3/4
17-5/8
19-5/16
21-5/8
24-1/8
28-3/8
35-3/8

660
700
750
750
750
1070
1350
1730
2400
3130
3970
4200
4550
6060
7290

146

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


STRUT PIPE ROLLER ROL12
Pipe Roller for 1 thru 4 Pipe
Size Range: 1 thru 4 pipe
Surface Finish: Electro-zinc plated
Pipe rollers which mount to strut
for applications where there is
longitudinal pipe movement

See chart on pages 148-149

STRUT PIPE ROLLER ROL13


Pipe Roller for 4 thru 8 Pipe
Size Range: 4 thru 8 pipe
Surface Finish: Electro-zinc plated
Pipe rollers which mount to strut
for applications where there is
longitudinal pipe movement

See chart on pages 148-149

Fitting specifications for strut-mounted rollers


ROL12-ROL15 (unless noted otherwise):
Hole Sizes: 9/16, Spacing 13/16 from edge and
1-7/8 on center
Width: 1-5/8
Thickness 1/4
Surface Finish: Electro-zinc plated

Ph: 1-800-333-0852
www.erico.com

147

SUPPORTS, GUIDES & ROLLERS 13


ROL12 & ROL13 Sizing Chart

Pipe
Size

3/4

1-1/4

1-1/2

2-1/2

Saddle
Number

Actual
Covering
Thickness

Actual
O.D.

Actual
Radius

None
630
631
632
None
630
631
632
None
630
631
632
633
None
630
631
632
633
None
630
631
632
633
634
None
630
631
632
633
634
None
630
631
632
633
634

0
7/8
1-7/16
1-7/8
0
11/16
1-9/16
2-1/8
0
7/8
1-5/8
1-15/16
2-7/16
0
1
1-1/2
2-5/16
2-13/16
0
1-1/16
1-9/16
2-1/8
2-5/8
3-1/8
0
1-1/16
1-7/16
2-5/16
2-7/8
3-3/8
0
1
1-9/16
2-1/16
2-9/16
3-1/16

11/16
3-1/4
4-3/8
5-1/16
15/16
3-5/8
4-5/8
5-3/4
1-11/16
3-7/8
5-1/8
6
6-7/8
1-7/8
4-1/4
5-1/4
6-7/8
7-3/4
2-3/8
4-3/4
5-3/4
7-1/8
8-1/8
9-1/8
2-7/8
5-3/8
6-1/8
7-7/8
9
10
3-1/2
5-7/8
7
8
9
10

17/32
1-5/8
2-3/16
2-17/32
21/32
1-13/16
2-5/16
2-7/8
27/32
1-15/16
2-9/16
3
3-7/16
15/16
2-1/8
2-5/8
3-7/16
3-7/8
1-3/16
2-3/8
2-7/8
3-9/16
4-1/16
4-9/16
1-7/16
2-11/16
3-1/16
3-15/16
4-1/2
5
1-3/4
2-15/16
3-1/2
4
4-1/2
5

6-1/2
6-1/2
8-1/4
8-1/4
6-1/2
7-1/4
8-1/4
8-1/4
6-1/2
7-1/4
8-1/4
8-1/4
9-1/4
6-1/2
8-1/4
8-1/4
9-1/4
9-1/4
6-1/2
8-1/4
8-1/4
9-1/4
10-1/8
10-1/8
6-1/2
8-1/4
9-1/4
9-1/4
9-1/4
9-1/4
7-1/4
8-1/4
9-1/4
10-1/8
10-1/8
10-7/8

2-15/16
4-1/8
4-7/16
4-13/16
3-1/8
4-1/4
4-9/16
5-1/8
3-5/16
4-5/16
4-13/16
5-1/4
5-5/8
3-3/8
4-3/8
4-7/8
5-9/16
6
3-11/16
4-5/8
5-1/8
5-11/16
6-1/16
6-5/8
3-15/16
4-15/16
5-1/4
6-1/8
6-3/4
7-1/4
4-1/8
5-1/4
5-5/8
6-1/16
6-5/8
7

148

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


ROL12 & ROL13 Sizing Chart

Pipe
Size

3-1/2

Saddle
Number

Actual
Covering
Thickness

Actual
O.D.

Actual
Radius

None
630
631
632
633
634
None
630
631
632
633
634
635
None
630
631
632
633
634
635
None
630
631
632
633
634
635
None
631
632
633
634
635

0
1-1/4
1-13/16
2-1/4
2-3/4
3-5/16
0
1-1/16
1-9/16
2-1/16
2-9/16
3-1/16
4-1/16
0
1
1-1/2
2
2-9/16
3-1/16
4-3/16
0
1
1-1/2
2
2-1/2
3
4-1/8
0
1-1/2
2
2-11/16
3-1/8
4-1/8

4
6-7/8
8
8-7/8
9-7/8
11
4-1/2
7-1/8
8-1/8
9-1/8
10
11-1/4
13
5-5/8
8-1/4
9-3/8
10-3/8
11-1/4
12-3/8
14-1/4
6-5/8
9
10-1/8
11
12-3/8
13-1/2
15-1/8
8-5/8
12
13
14-1/2
15-3/8
17-3/8

2
3-7/16
4
4-7/16
4-15/16
5-1/2
2-1/4
3-9/16
4-1/16
4-9/16
5
5-5/8
6-1/2
2-13/16
4-1/8
4-11/16
5-3/16
5-5/8
6-3/16
7-1/8
3-5/16
4-1/2
5-1/16
5-1/2
6-3/16
6-3/4
7-9/16
4-5/16
6
6-1/2
7-1/4
7-11/16
8-11/16

7-1/4
9-1/4
9-1/4
10-1/8
10-1/8
10-7/8
8-1/4
9-1/4
10-1/8
10-1/8
10-1/8
10-7/8
10-7/8
8-1/4
10-1/8
10-1/8
10-7/8
10-7/8
10-7/8
10-7/8
9-1/4
10-1/8
10-7/8
10-7/8
10-7/8
10-7/8
10-7/8
10-1/8
10-7/8
10-7/8
10-7/8
10-7/8
10-7/8

4-3/8
5-1/2
6-1/8
6-9/16
7
7-7/16
4-1/2
5-11/16
6-1/16
6-5/8
7-1/16
7-5/8
8-9/16
5-1/16
6-1/8
6-11/16
7
7-5/8
8-1/8
9-3/16
5-7/16
6-9/16
7
7-1/2
8-3/16
8-5/8
9-11/16
6-3/8
8
8-9/16
9-5/16
9-13/16
10-7/8

Ph: 1-800-333-0852
www.erico.com

149

SUPPORTS, GUIDES & ROLLERS 13


STRUT PIPE ROLLER ROL14
Pipe Roller for 6 thru 16 Pipe
Size Range: 6 thru 16 pipe
Surface Finish: Electro-zinc plated
Pipe rollers which mount to strut
for applications where there is
longitudinal pipe movement
ROL14 Sizing Chart
Pipe
Size

10

12

14

16

Saddle
Number

Actual
Covering
Thickness

Actual
O.D.

Actual
Radius

None
630
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635
None
631
632
633
634
635

0
1
1-1/2
2
2-1/2
3
4-1/8
0
1-1/2
2
2-11/16
3-1/8
4-1/8
0
1-1/2
2-1/16
2-9/16
3-1/16
4-1/16
0
1-9/16
2-1/16
2-5/8
3-1/16
4-1/8
0
1-1/2
2
2-1/2
3
4
0
1-1/2
2
2-1/2
3
4

6-5/8
9
10
11
12
13
15-1/4
8-5/8
12
13
14-3/8
15-1/4
17-1/4
10-3/4
14-1/4
15-1/4
16-1/4
17-1/4
19-1/4
12-3/4
16-1/8
17-1/4
18-1/4
19-1/4
21-3/8
14
17-1/2
18-3/8
19-3/8
20-3/8
22-3/8
16
19-5/8
20-3/8
21-5/8
22-1/8
24-3/8

3-5/16
4-1/8
5
5-1/2
6
6-1/2
7-5/8
4-5/16
6
6-1/2
7-3/16
7-5/8
8-5/8
5-3/8
7-1/8
7-5/8
8-1/8
8-5/8
9-3/4
6-3/8
8-1/16
8-5/8
9-1/8
9-5/8
10-11/16
7
8-3/4
9-3/16
9-11/16
10-3/16
11-3/16
8
9-13/16
10-3/16
10-13/16
11-1/16
12-3/16

9-9/16
10-3/16
10-5/8
11
11-3/8
11-3/4
12-1/2
10-1/4
11-3/8
11-3/4
12-3/16
12-1/2
13-1/4
11
12-1/8
12-1/2
12-13/16
13-1/8
13-7/8
11-11/16
12-7/8
13-1/4
13-9/16
13-7/8
14-5/8
12-1/16
13-3/16
13-9/16
13-7/8
14-1/4
14-7/8
12-3/4
13-7/8
14-13/16
14-1/2
14-7/8
15-1/2

6-7/8
7-7/8
8-3/8
8-7/8
9-3/8
9-7/8
10-15/16
7-13/16
9-3/8
9-7/8
10-7/16
10-15/16
11-7/8
8-13/16
10-7/16
10-15/16
11-3/8
11-7/8
12-13/16
9-3/4
11-3/8
11-7/8
12-5/16
12-13/16
13-3/4
10-5/16
11-7/8
12-5/16
12-13/16
13-1/4
14-1/4
11-5/16
12-13/16
13-1/4
13-3/4
14-1/4
15-1/8

150

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


STRUT PIPE ROLLER ROL15
Pipe Roller for 16 thru 24 Pipe
Size Range: 16 thru 24 pipe
Surface Finish: Electro-zinc plated
Pipe rollers which mount to strut for
applications where there is
longitudinal pipe movement

Pipe
Size

18

20

24

30

ROL15 Sizing Chart


Actual
Actual
Actual
Covering
O.D.
Radius
Thickness
None
0
18
9
631
1-1/2
21-3/8 10-11/16
632
2
22-3/8
11-3/16
633
2-1/2
23-3/8 11-11/16
634
3
24-3/8
12-3/16
635
4
26-3/8
13-3/16
None
0
20
10
631
1-1/2
23-3/8 11-11/16
632
2
24-3/8
12-3/16
633
2-1/2
25-3/8 12-11/16
634
3
26-3/8
13-3/16
635
4
28-3/8
14-3/16
None
0
24
12
631
1-1/2
27-1/2
13-3/4
632
2
28-1/2
14-1/4
633
2-1/2
29-1/2
14-3/4
634
3
30-1/2
15-1/4
635
4
32-1/2
16-1/4
special order
0
30
15
Saddle
Number

Ph: 1-800-333-0852
www.erico.com

151

15-1/2
16-3/16
16-3/8
16-9/16
16-3/4
17-3/16
16
16-9/16
16-7/8
16-15/16
17-3/16
17-1/2
16-13/16
17-1/2
17-1/2
17-11/16
17-7/8
18-1/8
17-13/16

11-7/8
13-7/16
13-15/16
14-7/16
14-15/16
15-15/16
12-3/16
14-7/16
14-7/8
15-7/16
15-7/8
16-15/16
14-13/16
16-3/8
16-7/8
17-3/8
17-7/8
18-7/8
17-13/16

SUPPORTS, GUIDES & ROLLERS 13


PIPE GUIDE 650
Pipe Alignment Guide
Size Range: 1/2 thru 24
Surface Finish: Painted, color
may vary
Maintaining pipe alignment during
longitudinal expansion or
contraction cycles of hot systems
Available in HD finish by special
order, when ordering must specify:
1. Pipe Size
2. Insulation Thickness
NOTE:
1. Pipe alignment guides are not designed to be load bearing
2. Maximum Pipe Movement:
1 thru 6 pipe:
6 movement
8 thru 16 pipe:
8 movement
18 thru 24 pipe:
10 movement
3. Use minimum of two guides per run and locate first guide
4 pipe diameters from expansion joint or loop
4. One half of internal spider pipe clamp assembly remains inside guide housing
at installation. Protruding portion of clamp assembly must be toward anchored
end of pipe or toward direction from which pipe movement will occur
5. Special guides with longer travels are available upon request
GUIDE SIZE SELECTION CHART
Pipe
Size

1-1/2

1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
14
16
18
20
**24

1
1
1
1
2
2
3
3
4
5
5
6
8
9
10
11
12
13
14

1
2
2
2
2
3
3
4
4
5
5
6
8
9
10
11
12
13
14

Insulation Thickness
2
2-1/2
3
2
3
3
3
3
4
4
4
5
5
6
7
8
9
10
11
12
13
14

3
4
4
4
4
4
4
5
5
6
6
8
9
10
10
11
12
13
14

4
4
4
4
4
5
5
5
6
6
7
8
9
10
11
12
13
14
-

3-1/2

4
5
5
5
5
5
5
6
6
7
8
9
10
11
11
12
13
14
-

5
5
5
5
5
6
6
6
7
8
8
9
10
12
12
13
14
14
-

** Max. 2-1/2 insulation

152

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


PIPE GUIDE 650 (Cont.)
Part
Number*

Guide
Size

6500100XXPT
6500200XXPT
6500300XXPT
6500400XXPT
6500500XXPT
6500600XXPT
6500700XXPT
6500800XXPT
6500900XXPT
6501000XXPT
6501100XXPT
6501200XXPT
6501300XXPT
6501400XXPT

1
2
3
4
5
6
7
8
9
10
11
12
13
14

5-3/4
6-3/4
7-5/8
9-1/2
11-3/4
13-3/8
15
17
18-3/4
21-1/8
23-1/8
25
27-3/4
31-1/2

3-1/2
4
4-3/8
5-1/4
6-1/4
7-1/4
8
9
9-3/4
11-1/8
12-1/8
13
14-3/4
16-1/2

6-1/8
7-1/8
8-1/8
10-1/8
12-1/8
14-1/8
16-1/8
18-1/8
20-1/8
22-1/8
24-1/8
26-1/8
28-1/8
32-1/8

4-1/4 5/8
4-1/2 5/8
5-1/4 5/8
6-1/4 5/8
7-1/4 5/8
8-1/4 5/8
10
3/4
11
3/4
12
3/4
13-1/2 7/8
14-1/2 7/8
15-1/2 7/8
17-1/2 1-1/8
19-1/2 1-1/8

1-3/4
1-3/4
1-3/4
1-3/4
2-3/4
2-3/4
4
4
4
6
6
6
6
6

3
3
3
3
4
4
6
6
6
8
8
8
8
8

Max.
Allowable
Movement
6
6
6
6
6
6
8
8
8
8
8
8
10
10

*XX in part number indicates insulation thickness:


10 = 1 insulation
15 = 1-1/2 insulation
20 = 2 insulation
25 = 2-1/2 insulation
30 = 3 insulation
35 = 3-1/2 insulation
40 = 4 insulation

A
E

DIRECTION
OF PIPE
MOVEMENT

E
F
G

INSULATION NOT INCLUDED

Ph: 1-800-333-0852
www.erico.com

153

SUPPORTS, GUIDES & ROLLERS 13


PIPE GUIDE 651
Pre-Insulated Pipe
Alignment Guide
Size Range: 1/2 thru 18
Surface Finish: Painted, color
may vary
Maintaining pipe alignment during
longitudinal expansion or contraction
cycles of vapor barrier covered
insulated pipe
Carbon steel with painted finish,
calcium silicate insulation
NOTE:
1. Pipe alignment guides are not designed to be load bearing
2. Maximum Pipe Movement:
1 thru 6 pipe:
6 movement
8 thru 16 pipe:
8 movement
18 thru 24 pipe:
10 movement
3. Use minimum of two guides per run and locate first guide
4 pipe diameters from expansion joint or loop
4. One half of internal spider pipe clamp assembly remains
inside guide housing at installation. Protruding portion of
clamp assembly must be toward anchored end of pipe or
toward direction from which pipe movement will occur
5. Special guides with longer travels are available upon request
GUIDE SIZE SELECTION CHART
Pipe
Size

1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
12
14
16
18

1
1
1
2
2
2
2
3
3
4
4
5
7
8
8
9
10

Insulation Thickness
1-1/2
2
2-1/2
3
2
2
2
2
2
3
2
3
4
4
5
6
7
8
9
10
11

2
2
2
3
3
3
2
4
4
5
5
6
7
8
9
10
11

3
3
3
3
3
4
4
4
5
5
6
7
8
9
10
11
12

154

3
3
3
4
4
4
4
5
5
6
6
7
8
9
10
11
12

3-1/2
4
4
4
4
4
4
5
5
6
6
7
8
9
10
11
12
12

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


PIPE GUIDE 651 (Cont.)
Part
Number*

Guide
Size

6510100XXPT
6510200XXPT
6510300XXPT
6510400XXPT
6510500XXPT
6510600XXPT
6510700XXPT
6510800XXPT
6510900XXPT
6511000XXPT
6511100XXPT
6511200XXPT

1
2
3
4
5
6
7
8
9
10
11
12

7-5/8
9-1/2
11-5/8
13-5/8
15
17
18-3/4
21-1/8
23-1/2
25
27-3/4
31-1/2

4-3/8
5-1/4
6-1/4
7-1/4
8
9
9-3/4
11-1/8
12-1/8
13
14-3/4
16-1/2

8
10-3/8
12-1/2
14-1/2
15-3/4
17-3/4
20-1/8
22-1/8
24-1/8
26-5/8
28-5/8
32-5/8

5-1/2
5/8
6-1/4
5/8
7-1/4
5/8
8-1/4
5/8
10
3/4
11
3/4
12
3/4
13-1/2 3/4
14-1/2 7/8
15-1/2 7/8
17-1/2 1-1/8
19-1/2 1-1/8

1-3/4
1-3/4
2-3/4
2-3/4
4
4
4
4
6
6
6
6

3
3
4
4
6
6
6
6
8
8
8
8

Max.
Allowable
Movement
6
6
6
6
6
8
8
8
8
8
8
10

*XX in part number indicates insulation thickness:


10 = 1 insulation
15 = 1-1/2 insulation
20 = 2 insulation
25 = 2-1/2 insulation
30 = 3 insulation
35 = 3-1/2 insulation
40 = 4 insulation

DIRECTION
OF PIPE
MOVEMENT

F
G

Ph: 1-800-333-0852
www.erico.com

155

SUPPORTS, GUIDES & ROLLERS 13


PIPE SUPPORT 721
Saddle Support with U-bolt
Size Range: 2-1/2 thru 36
Surface Finish: Black
Stanchion type support where
vertical adjustment is not needed
U-bolt provides additional stability
Conforms with Federal Specification
WW-H-171 (Type 37, 38),
Manufacturers Standardization
Society ANSI/MSS-SP-58
(Type 37); install in accordance with
ANSI/MSS-SP-69
NOTE: Base not included
Part
Number
7210250PL
7210300PL
7210400PL
7210500PL
7210600PL
7210800PL
7211000PL
7211200PL
7211400PL
7211600PL
7211800PL
7212000PL
7212400PL
7212600PL
7213000PL
7213200PL
7213600PL

Pipe
Size

C
(NPS)

2-1/2
3
4
5
6
8
10
12
14
16
18
20
24
26
30
32
36

3-1/8
3-7/16
4-1/4
4-9/16
5-1/2
7
8
9-3/16
10-9/16
11-9/16
13-9/16
14-9/16
16-9/16
17-9/16
20-11/16
21-11/16
23-11/16

4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4

1-1/2
1-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
3
3
4
4
4
4
4
4
4

156

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


PIPE SUPPORT 722
Adjustable Pipe Support
Size Range: 4, 6, 8, and 10
Surface Finish: Black
N.P.T. pipe welded to pipe saddle
with a N.P.T. pipe lock nut allowing
for vertical adjustment in the
pipe stanchion
Conforms with Federal Specification
WW-H-171 (Type 39), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 38); install in accordance with
ANSI/MSS-SP-69
Part
Number
7220400PL
7220600PL
7220800PL
7221000PL

Ph: 1-800-333-0852
www.erico.com

Pipe
Size
4
6
8
10

A
10-5/8
11-11/16
12-11/16
13-3/4

157

SUPPORTS, GUIDES & ROLLERS 13


PIPE SUPPORT 723
Adjustable Pipe Support
Assembly
Size Range: 2-1/2 thru 36
Surface Finish: Black
Supports horizontal pipe from
stanchions where vertical adjustment
is needed
Conforms with Federal Specification
WW-H-171 (Type 38, 39),
Manufacturers Standardization
Society ANSI/MSS-SP-58 (Type 38);
install in accordance with
ANSI/MSS-SP-69
Part
Number

Pipe
Size

RS

7230250PL 2-1/2 1-1/2


7230300PL
3
1-1/2
7230350PL 3-1/2 1-1/2
7230400PL
4
2-1/2
7230500PL
5
2-1/2
7230600PL
6
2-1/2
7230800PL
8
2-1/2
7231000PL 10 2-1/2
7231200PL 12 2-1/2
7231400PL 14
3
7231600PL 16
3
7231800PL 18
4
7232000PL 20
4
7232400PL 24
4
7232600PL 26
4
7233000PL 30
4
7233200PL 32
4
7233600PL 36
4

Adjustment B
Min.
Max.

2-11/16
2-7/8
3-1/8
3-3/4
4-1/16
4-3/4
6-11/16
7-3/4
8-3/4
10-3/4
11-3/4
13-1/2
14-1/2
17-3/4
18-3/4
20-7/8
21-7/8
23-7/8

7-15/16
8-1/8
8-3/8
9-7/16
9-3/4
10-7/16
12-3/8
13-7/16
14-7/16
18-3/16
19-3/16
21-1/2
22-1/2
25-3/4
26-3/4
28-7/8
29-7/8
31-7/8

12-7/16
12-5/8
12-7/8
13-15/16
14-1/4
14-15/16
16-7/8
17-15/16
18-15/16
22-11/16
23-11/16
26
27
30-1/4
31-1/4
33-7/8
34-7/8
36-3/8

Gussets furnished
on 8" and larger

158

RS

Ph: 1-800-333-0852
www.erico.com

SUPPORTS, GUIDES & ROLLERS 13


PIPE SUPPORT 724
Adjustable Pipe Support
Assembly with U-bolt
Size Range: 2-1/2 thru 36
Surface Finish: Black
Supports horizontal pipe from
stanchions where vertical adjustment
is needed
Conforms with Federal Specification
WW-H-171 (Type 38, 39),
Manufacturers Standardization Society
ANSI/MSS-SP-58 (Type 37, 38); install
in accordance with ANSI/MSS-SP-69
Part
Number

Part
Size

RS

Adjustment B
Min.
Max.

8-3/8
7240250PL 2-1/2 1-1/2 3-1/8
3 1-1/2 3-7/16 8-11/16
7240300PL
7240350PL 3-1/2 1-1/2 3-11/16 8-15/16
4 2-1/2 4-1/4
9-15/16
7240400PL
5 2-1/2 4-9/16
10-1/4
7240500PL
6 2-1/2 5-1/2
11-3/16
7240600PL
8 2-1/2
7
12-11/16
7240800PL
8
13-11/16
7241000PL 10 2-1/2
14-7/8
7241200PL 12 2-1/2 9-3/16
3
10-9/16
18
7241400PL 14
3
11-9/16
19
7241600PL 16
4
13-9/16 21-9/16
7241800PL 18
4
14-9/16 22-9/16
7242000PL 20
4
16-9/16 24-9/16
7242400PL 24
4
17-9/16 25-9/16
7242600PL 26
4 20-11/16 28-11/16
7243000PL 30
4 21-11/16 29-11/16
7243200PL 32
4
23-1/16 31-11/16
7243600PL 36

12-7/8
13-3/16
13-7/16
14-7/16
14-3/4
15-11/16
17-3/16
18-3/16
19-3/8
22-1/2
23-1/2
26-1/16
27-1/16
29-1/16
30-1/16
33-3/16
34-3/16
36-3/16

Gussets
Gussetsfurnished
furnished
onon8"8"and
and larger
larger
Ph: 1-800-333-0852
www.erico.com

159

RS

160

Ph: 1-800-333-0852
www.erico.com

SHIELDS & SADDLES

14

Page 162

Page 163

Page 164

125

121

126

Page 165

Page 166

Page 167

127

630

631

Page 168

Page 169

Page 170

632

633

634

Page 171

635

Ph: 1-800-333-0852
www.erico.com

161

SHIELDS & SADDLES

14

INSULATION SHIELD 125


Low Compression Insulation
Shield
Size Range: 1-1/2 thru 28
Surface Finish: Electro-zinc plated
Resists crushing insulation at the
point of support when the insulation
has more than 5% deformation
at 30 psi
Conforms with Federal Specification
WW-H-171 (Type 41), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 40); install in accordance with
ANSI/MSS-SP-69

NOTE: Shield size directly corresponds to hanger

size into which it will nest, see Models 126 and 127
for pre-insulated pipe support systems
NOTE: Please see page 268 for sizing chart
Part
Number
1250150EG
1250200EG
1250250EG
1250300EG
1250350EG
1250400EG
1250450EG
1250500EG
1250600EG
1250700EG
1250701EG
1250800EG
1250801EG
1250900EG
1251000EG
1251100EG
1251200EG
1251400EG
1251500EG
1251600EG
1251800EG
1251900EG
1252000EG
1252200EG
1252400EG
1252800EG

Shield
Size

Gauge

1-1/2
2
2-1/2
3
3-1/2
4
4-1/2
5
6
7
7A
8
8A
9
10
11
12
14
15
16
18
19
20
22
24
28

2-1/8
2-1/2
3
3-5/8
4-1/8
4-5/8
5
5-9/16
6-5/8
7-5/8
7-5/8
8-3/8
8-5/8
9-5/8
10-3/4
11-3/4
12-3/4
14
15
16
18
19
20
22
24
28

12
12
12
12
12
12
12
12
12
12
18
12
18
18
18
24
24
24
24
24
24
24
24
24
24
24

18
18
18
18
18
16
18
18
16
16
16
16
16
16
16
14
14
14
14
14
12
12
12
12
12
12

162

Ph: 1-800-333-0852
www.erico.com

SHIELDS & SADDLES

14

INSULATION SHIELD 121


High Density Insulation Shield
Size Range: 1-1/2 thru 10
Surface Finish: Black
Use with high density pipe covering
or where hard block at the point of
support is needed
NOTE: Shield size directly corresponds to hanger size into which it
will nest. Available in Electro-zinc plated finish by special order
for pre-insulated pipe support systems
NOTE: Please see page 268 for sizing chart
Part
Number
1210150PL
1210200PL
1210250PL
1210300PL
1210350PL
1210400PL
1210500PL
1210600PL
1210800PL
1211000PL

Shield
Size

Gauge

1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10

1-7/8
2-3/8
3-1/8
3-5/8
4
4-1/2
5-9/16
6-5/8
8-5/8
10-3/4

3
3
4
4
4
6
6
6
6
6

19
19
19
19
19
19
19
19
19
19

Ph: 1-800-333-0852
www.erico.com

163

SHIELDS & SADDLES

14

INSULATION SHIELD 126


360 Shield and Insulation
Hot Piping
Size Range: 1/2 thru 18 pipe, 1
thru 4 insulation thickness
Prevents crushed insulation at the
point of support
For use with hot services
140 psi minimum compressive strength, -20F to 1200F
working temperature, and detailed insulation specifications
available on request
When ordering specify pipe or tubing size, insulation
thickness, model number, and name
Construction:
360, 2 piece pre-galvanized metal jacket encasing asbestos
free, hydrous calcium silicate, treated for water resistance.
Insulation is affixed inside top and bottom halves of the metal
jacket where bottom jacket overlaps top and is assembled by
sliding together

Pipe or
Tubing Size
1/2 thru 1-1/2
2 thru 5
6 thru 10
12 thru 14
16 thru 24

A Insulation Length
Based on Insulation
Thickness of*
1
1-1/2
2
2-1/2
3

6
6
9
9
12

6
9
9
9
12

6
6
9
9
12

6
6
9
9
12

6
6
9
9
12

6
9
9
9
12

*Cold water inserts have a minimum insulation length of 6

Pipe or
Tubing Size
1/2 thru 1-1/2
2 thru 5
6 thru 10
12 thru 14
16 thru 24

Sheet Metal Gauge


Based on Insulation
Thickness of**
1
1-1/2
2
2-1/2

22
20
16
16
14

20
20
16
16
14

20
20
16
16
14

22
20
16
16
14

22
20
16
16
14

20
20
16
16
14

**A double thickness of sheet metal is recommended


on the lower half when used with rollers or when
hanger span exceeds 10

164

Ph: 1-800-333-0852
www.erico.com

SHIELDS & SADDLES

14

INSULATION SHIELD 127


360 Shield and Insulation
Cold Piping
Size Range: 1/2 thru 18 pipe, 1
thru 4 insulation thickness
Prevents crushed insulation at the
point of support
For use with hot services
140 psi minimum compressive strength, -20F to 1200F
working temperature, and detailed insulation specifications
available on request
When ordering specify pipe or tubing size, insulation
thickness, model number, and name
Construction:
360, 2 piece pre-galvanized metal jacket encasing asbestos free,
hydrous calcium silicate, treated for water resistance. Insulation has
vapor barrier and extends 1 beyond metal jacket so joint may be
taped to make complete vapor barrier between insert and line
insulation
Pipe or
Tubing Size
1/2 thru 1-1/2
2 thru 5
6 thru 14
16 thru 24

A Insulation Length
Based on Insulation
Thickness of*
1
1-1/2
2
2-1/2
3

6
6
9
12

6
9
9
12

6
6
9
12

6
6
9
12

6
6
6
12

6
9
9
12

*Cold water inserts have a minimum insulation length of 6

Pipe or
Tubing Size
1/2 thru 1-1/2
2 thru 5
6 thru 14
16 thru 24

Sheet Metal Gauge


Based on Insulation
Thickness of**
1
1-1/2
2
2-1/2

22
20
16
16

20
20
16
16

20
20
16
16

22
20
16
16

22
20
16
16

20
20
16
16

**A double thickness of sheet metal is recommended


on the lower half when used with rollers or when
hanger span exceeds 10

Metal Shield

Vapor Barrier

Ph: 1-800-333-0852
www.erico.com

165

SHIELDS & SADDLES

14

PIPE SADDLE 630


Protection Saddle for 1 Pipe
Insulation
Size Range: 3/4 thru 8
Surface Finish: Black
Designed for high temperature
service or where heat losses are to
be kept at a minimum and to protect
insulation against damage at the
point of support
Conforms with Federal Specification
WW-H-171 (Type 40A or 40B), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 39A or 39B); install in accordance
with ANSI/MSS-SP-69
NOTE: Larger sizes available upon request
Size of Pipe Roll for
Model #
Part
Number

6300150PL

6300350PL

6300500PL
6300600PL
6300800PL

Actual
Pipe Thick- 600,605 610
617
Size ness of 615,620 612
619
Cover
3/4
7/8
2-1/2 2-1/2 2 to 3-1/2
1 1-1/16 2-1/2
3 2 to 3-1/2
1-1/4 7/8
2-1/2
3 2 to 3-1/2
1-1/2
1
3
3-1/2 2 to 3-1/2
2 1-1/16 3-1/2
4 2 to 3-1/2
2-1/2 1-1/16 3-1/2
5 2 to 3-1/2
3
1
4
5 2 to 3-1/2
3-1/2 1-1/4
5
6
4 to 6
4 1-1/16
5
6
4 to 6
5
1
6
8
4 to 6
6
1
8
8
4 to 6
8
1-1/2
10
12 8 to 10

Center
Line
of Pipe
to Outside of
Saddle
1-3/4
1-15/16
2-1/8
2-1/4
2-7/16
2-3/4
3-1/16
3-3/8
3-7/16
4-1/16
4-9/16
6

Center Line of Pipe


to Center Line of Roll
for Model #
600,605
610
617
615,620
612
619

Max.
Rec.
Load
(lbs)*

2-3/16 2-1/4
2-7/16 2-3/8
2-11/16 2-5/8
2-3/4
2-3/4
3-1/16
3
3-5/16 3-5/16
3-5/8
3-5/8
4-1/16 4-1/16
4-1/8
4-1/8
4-3/4
4-3/4
5-3/8
5-3/8
7-1/16 7-1/16

1200
1200
1200
1200
1200
1200
1200
1200
1800
1800
1800
1800

2-3/8
3
2-3/4
2-1/4
3
3-3/8
3-11/16
4
4-1/16
4-11/16
5-1/4
7-1/16

*Maximum recommended loads are applicable only when the saddle is used on a flat
bearing surface and tack welded to the pipe. When a saddle is used with a pipe roll,
the maximum load given for the pipe roll applies to the saddle

166

Ph: 1-800-333-0852
www.erico.com

SHIELDS & SADDLES

14

PIPE SADDLE 631


Protection Saddle for 1-1/2 Pipe
Insulation

Size Range: 3/4 thru 24


Surface Finish: Black
Designed for high temperature
service or where heat losses are to be
kept at a minimum and to protect
insulation against damage at the
point of support
Conforms with Federal Specification
WW-H-171 (Type 40A or 40B), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 39A or 39B); install in accordance
with ANSI/MSS-SP-69
NOTE: Larger sizes available upon request.
Saddles have a welded-in center plate for pipe
sizes 12 and larger, see Type A

Part
Number

6310150PL

6310350PL

6310500PL
6310800PL
6311000PL
6311200PL
6311400PL
6311600PL
6311800PL
6312000PL
6312400PL

Actual
Pipe ThickSize ness of
Cover
3/4 1-7/16
1 1-9/16
1-1/4 1-5/8
1-1/2 1-1/2
2 1-9/16
2-1/2 1-7/16
3 1-9/16
3-1/2 1-13/16
4 1-9/16
5 1-1/2
6 1-1/2
8 1-1/2
10 1-9/16
12 1-1/2
14 1-1/2
16 1-1/2
18 1-1/2
20 1-1/2
24 1-1/2

Size of Pipe Roll for


Model #
600,605 610
615,620 612
3
3
3-1/2
3-1/2
4
5
5
6
6
8
8
10
12
14
16
18
20
24
30

3-1/2
4
5
5
5
6
6
8
8
8
10
12
14
16
18
20
N/A
N/A
N/A

617
619
2 to 3-1/2
2 to 3-1/2
2 to 3-1/2
2 to 3-1/2
2 to 3-1/2
2 to 3-1/2
2 to 3-1/2
4 to 6
4 to 6
4 to 6
8 to 10
8 to 10
8 to 10
12 to 14
12 to 14
16 to 20
16 to 20
24 to 26
22 to 30

12"

(120)

Center
Line
of Pipe
to Outside of
Saddle
2-1/8
2-7/16
2-9/16
2-11/16
3
3-1/4
3-5/8
3-7/8
3-7/8
4-1/2
5-3/16
6-5/16
7-1/4
8-1/16
8-7/8
9-7/8
10-7/8
11-3/4
13-5/8

Center Line of Pipe


to Center Line of Roll
for Model #
600,605
610
617
615,620
612
619
2-11/16
3
3-1/16
3-5/16
3-5/8
3-15/16
4-5/16
4-3/4
4-11/16
5-5/16
6
7-3/8
8-5/16
8-1/16
8-7/8
11-5/16
12-3/8
13-11/16
16-7/16

2-11/16
3
3-1/16
3-5/16
3-5/8
3-15/16
4-5/16
4-3/4
4-11/16
5-5/16
5-13/16
7-3/8
8-1/2
9-1/2
10-1/2
11-5/16
N/A
N/A
N/A

3-13/16
3-1/8
3-3/16
3-5/16
3-5/8
3-7/8
4-1/4
4-11/16
4-9/16
5-3/16
6-1/8
7-3/8
8-5/16
9-1/4
10-3/16
11-3/16
12-1/4
13-3/16
15-3/8

*Maximum recommended loads are applicable only


when the saddle is used on a flat bearing surface
and tack welded to the pipe. When a saddle is used
with a pipe roll, the maximum load given for the
pipe roll applies to the saddle
Type A

Ph: 1-800-333-0852
www.erico.com

167

Type B

Max.
Rec.
Load
(lbs)*
1200
1200
1200
1200
1200
1200
1800
1800
1800
1800
1800
1800
1800
5000
5000
5000
5000
7200
7200

SHIELDS & SADDLES

14

PIPE SADDLE 632


Protection Saddle for
2 Pipe Insulation
Size Range: 3/4 thru 24
Surface Finish: Black
Designed for high temperature
service or where heat losses are to
be kept at a minimum and to protect
insulation against damage at the
point of support
Conforms with Federal Specification
WW-H-171 (Type 40A or 40B),
Manufacturers Standardization Society
ANSI/MSS-SP-58 (Type 39A or 39B); install
in accordance with ANSI/MSS-SP-69

12"

NOTE: Larger sizes available upon request.

(120)

Saddles have a welded-in center plate for pipe


sizes 12 and larger, see Type A
Size of Pipe Roll for
Model #
Part
Number

6320150PL

Actual
Pipe Thick- 600,605 610
Size ness of 615,620 612
Cover
621

Max.
Rec.
Load
(lbs)*

3/4

1-7/8

2 to 3-1/2 2-3/4

3-3/8

3-3/8

3-7/16 1200

2-1/8

2 to 3-1/2 2-15/16 3-9/16

3-9/16

3-9/16 1200

2 to 3-1/2 3-1/8

3-13/16 1200

1-1/4 1-15/16

3-3/4

3-3/4

1-1/2 2-5/16

4 to 6

3-1/4

4-1/8

4-1/8

4-1/8

2-1/8

4 to 6

3-1/2

4-3/16

4-3/16

4-3/16 1800

2-1/2 2-5/16

4-3/8

4-1/2

4-3/8

2
6320350PL

617
619

Center
Center Line of Pipe
Line
to Center Line of Roll
of Pipe
for Model #
to Out- 600,605
610
617
side of 615,620
612
619
Saddle
621

1800

4 to 6

3-3/4

2-1/16

4 to 6

4-1/8

4-13/16 4-13/16 4-11/16 1800

3-1/2 2-1/4

1800

4 to 6

4-3/8

5-3/16

5-3/16

2-1/16

4 to 6

4-11/16

5-1/2

5-1/2

5-3/8

1800

10

8 to 10 4-15/16

5-3/4

5-13/16

5-7/8

1800

10

10

8 to 10 5-11/16

6-5/8

6-5/8

10

12

8 to 10 6-13/16

7-7/8

7-7/8

6321000PL 10 2-1/16

14

16

12 to 14

9-1/16

6321200PL 12 2-1/16

16

18

16 to 20 8-13/16 8-3/16

10-1/4 10-3/16 5000

6321400PL 14

16

18

16 to 20

10-3/4

6321600PL 16

18

20

16 to 20 10-1/4 11-13/16 11-13/16 11-5/8 5000

6321800PL 18

20

N/A

22 to 24 11-1/2 13-1/16

N/A

12-7/8 7200

6322000PL 20

24

N/A

22 to 24 12-5/16 14-3/16

N/A

13-11/16 7200

6322400PL 24

30

N/A

26 to 30 14-3/16 17-1/16

N/A

15-15/16 7200

6320500PL
6320800PL

7-5/8
9-1/4

9-1/4

*Maximum recommended loads are applicable


only when the saddle is used on a flat bearing
surface and tack welded to the pipe. When a
saddle is used with a pipe roll, the maximum
load given for the pipe roll applies to the saddle

168

Type A

5-1/16 1800

6-11/16 1800
7-7/8

1800

8-13/16 1800
10-5/8 5000

Type B

Ph: 1-800-333-0852
www.erico.com

SHIELDS & SADDLES

14

PIPE SADDLE 633


Protection Saddle for 2-1/2
Pipe Insulation
Size Range: 1-1/4 thru 24
Surface Finish: Black
Designed for high temperature service
or where heat losses are to be kept at
a minimum and to protect insulation
against damage at the point of support
Conforms with Federal Specification
WW-H-171 (Type 40A or 40B),
Manufacturers Standardization Society
ANSI/MSS-SP-58 (Type 39A or 39B); install
in accordance with ANSI/MSS-SP-69
NOTE: Larger sizes available upon request.
Saddles have a welded-in center plate for
pipe sizes 12 and larger, see Type A
Size of Pipe Roll for
Model #
Part
Number
6330150PL
6330200PL
6330250PL
6330300PL
6330350PL
6330500PL
6330800PL
6331000PL
6331600PL
6331800PL
6332000PL
6332400PL

Actual
Pipe Thick- 600,605 610
617
Size ness of 615,620 612
619
Cover
621
1-1/4 2-7/16
5
6
4 to 6
1-1/2 2-13/16
6
5
4 to 6
2
2-5/8
6
8
4 to 6
2-1/2 2-7/8
8
8
4 to 6
3 2-9/16
8
8
4 to 6
3-1/2 2-3/4
8
10 8 to 10
4 2-9/16
8
10 8 to 10
5 2-9/16
10
10 8 to 10
6
2-1/2
10
12 8 to 10
8 2-11/16
12
14 8 to 10
10 2-9/16
14
16 12 to 14
16 2-1/2
20
N/A 16 to 20
18 2-1/2
24
N/A 22 to 24
20 2-1/2
24
N/A 22 to 24
20 2-1/2
30
N/A 26 to 30

12"

(120)

Center
Center Line of Pipe
Line
to Center Line of Roll
of Pipe
for Model #
to Out- 600,605
610
617
side of 615,620
612
619
Saddle
621
3-3/4 4-3/8
4-3/8
4-3/8
3-13/16 4-7/16 4-7/16 4-9/16
3-15/16 4-5/8 4-11/16 4-11/16
4-7/16 5-5/16 5-5/16 5-3/16
4-11/16 5-7/16 5-7/16 5-5/16
4-13/16 5-3/4
5-3/4 5-13/16
5-1/8 6-1/16 6-1/16 6-3/4
5-9/16 6-1/2
6-1/2 6-9/16
6-3/16 7-1/8 7-13/16 7-1/4
7-5/16 8-3/8 8-9/16 8-3/8
8-3/16 9-5/8
9-5/8
9-3/8
10-7/8 12-3/8
N/A
12-7/8
12 13-15/16
N/A
13-7/16
12-7/8 14-13/16
N/A
14-5/16
14-3/4 17-5/8
N/A
16-9/16

*Maximum recommended loads are applicable only


when the saddle is used on a flat bearing surface and
tack welded to the pipe. When a saddle is used with a
pipe roll, the maximum load given for the pipe roll
applies to the saddle
Type A

Ph: 1-800-333-0852
www.erico.com

169

Type B

Max.
Rec.
Load
(lbs)*
1200
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
7200
7200
7200
7200

SHIELDS & SADDLES

14

PIPE SADDLE 634


Protection Saddle for 3 Pipe
Insulation
Size Range: 2 thru 24
Surface Finish: Black
Designed for high temperature
service or where heat losses are to
be kept at a minimum and to protect
insulation against damage at the point
of support
Conforms with Federal Specification
WW-H-171 (Type 40A or 40B),
Manufacturers Standardization Society
ANSI/MSS-SP-58 (Type 39A or 39B);
install in accordance
with ANSI/MSS-SP-69

12"

(120)

NOTE: Larger sizes available upon request. Saddles have a


welded-in center plate for pipe sizes 12 and larger, see Type A
Size of Pipe Roll for
Model #
Part
Number

Pipe
Size

6340200PL 2
6340250PL 2-1/2
6340300PL 3
6340350PL 3-1/2
4
6340500PL
5
6
6340800PL
8
6341000PL 10
6341200PL 12
6341400PL 14
6341600PL 16
6341800PL 18
6342000PL 20
6342400PL 24

Actual
Thick- 600,605 610
617
ness of 615,620 612
619
Cover
621
3-1/8
8
8
4 to 6
3-3/8
8
10
4 to 6
3-1/16
8
10 8 to 10
3-5/16
10
10 8 to 10
3-1/16
10
10 8 to 10
3-1/16
10
12 8 to 10
3
12
12 8 to 10
3-1/8
14
16 12 to 14
3-1/16
16
18 16 to 20
3-1/16
18
20 16 to 20
3
18
20 16 to 20
3
24
N/A 22 to 24
3
24
N/A 22 to 24
3
24
N/A 22 to 24
3
30
N/A 26 to 30

Center
Line
of Pipe
to Outside of
Saddle
4-11/16
4-15/16
5
5-1/2
5-9/16
6-1/8
6-9/16
7-5/8
8-7/8
9-11/16
10-1/4
11-3/16
12-5/16
13-1/2
15-3/8

Center Line of Pipe


to Center Line of Roll
for Model #
600,605
610
617
615,620
612
619
621
5-1/2
5-1/2
5-1/2
5-11/16 5-13/16 5-9/16
5-15/16 5-15/16
6
6-7/16 6-7/16 6-1/2
6-1/2
6-1/2
7-1/2
7-1/16 7-3/16 7-3/16
7-5/8
7-5/8
7-5/8
8-15/16 8-15/16 8-11/16
10-5/16 10-7/8 10-3/16
9-11/16 11-3/16 11-1/16
10-1/4 11-11/16 11-1/8
13
N/A
12-9/16
14-1/4
N/A
13-11/16
15-7/16
N/A
14-15/16
18-3/16
N/A
17-1/8

Max.
Rec.
Load
(lbs)*
1800
1800
1800
1800
1800
1800
1800
1800
1800
5000
5000
7200
7200
7200
7200

*Maximum recommended loads are applicable only


when the saddle is used on a flat bearing surface
and tack welded to the pipe. When a saddle is
used with a pipe roll, the maximum load given for
the pipe roll applies to the saddle
Type A

170

Type B

Ph: 1-800-333-0852
www.erico.com

SHIELDS & SADDLES

14

PIPE SADDLE 635


Protection Saddle for 4 Pipe
Insulation
Size Range: 4 thru 24
Surface Finish: Black
Designed for high temperature service
or where heat losses are to be kept at
a minimum and to protect insulation
against damage at the point of support
Conforms with Federal Specification
WW-H-171 (Type 40A or 40B),
Manufacturers Standardization Society
ANSI/MSS-SP-58 (Type 39A or 39B);
install in accordance
with ANSI/MSS-SP-69
NOTE: Larger sizes available upon request.
Saddles have a welded-in center plate for
pipe sizes 12 and larger, see Type A
Size of Pipe Roll for
Model #
Part
Number

Actual
Pipe Thick- 600,605 610
Size ness of 615,620 612
Cover
621

617
619

12"

(120)

Center
Center Line of Pipe
Line
to Center Line of Roll
of Pipe
for Model #
to Out- 600,605
610
617
side of 615,620
612
619
Saddle
621

Max.
Rec.
Load
(lbs)*

6350400PL

4-1/16

10

12

8 to 10

6-9/16 7-11/16 7-11/16

7-5/8

1800

6350500PL

4-3/16

12

14

8 to 10

7-3/16

8-1/4

8-7/16

8-1/4

1800

4-1/8

14

16

12 to 14

7-5/8

9-1/16

9-1/16 8-13/16 1800

6350800PL

4-1/8

16

18

12 to 14 8-11/16 10-1/8

6351000PL 10

4-1/16

18

20

16 to 20 9-11/16 11-3/16 11-3/16 11-1/16 1800

10-1/8

6351200PL 12

4-1/8

20

N/A 16 to 20 10-13/16

6351600PL 16

24

N/A 22 to 24 12-5/16 14-1/4

N/A

13-3/4 7200

6351800PL 18

24

N/A 22 to 24

N/A

14-15/16 7200

6352000PL 20

30

N/A 26 to 30 14-3/16 17-1/16

N/A

15-15/16 7200

6352400PL 24

30

N/A 26 to 30 16-9/16 19-3/8

N/A

18-5/16 7200

13

N/A

13-1/2 15-7/16

9-7/8

12-13/16 5000

*Maximum recommended loads are applicable


only when the saddle is used on a flat bearing
surface and tack welded to the pipe. When a
saddle is used with a pipe roll, the maximum
load given for the pipe roll applies to the saddle
Type A

Ph: 1-800-333-0852
www.erico.com

171

1800

Type B

ucts
NEW Prod
CADDY SLICK STRUT NUT
Reduce installation time and
inventory by over 75%
Integral plastic strip provides tension
to grip the strut, even vertically
Allows for easy repositioning or
removal

See page 184

CADDY CHANNEL CLAMP


STS (STRUT-TO-STRUT)
Provides fast assembly of back-toback half-slot strut as an alternative
to welded strut
Unique one-piece assembly
eliminates the need for washers,
bolts and nuts
For new or retrofit applications

See page 185

STRUT BEAM CLAMP STCB


Structural attachment to beams to
support threaded rod and/or strut
Maximum flange thickness: 3/4
when used with 1-5/8 strut and
1-5/8 when used with 13/16 strut

See page 191

STRUT PIPE CLAMPS - Refer to Chapter 9, page 78

STRUT ROLLERS - Refer to Chapter 13, page 147

172

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15

Page 179

Page 180

Page 180

A12

A14

B12

Page 181

Page 182

Page 182

C12

C14

D12

NEW

Page 183

Page 183

Page 184

E12

CONC

CADDY SLICK

Page 185

Page 186

Page 186

STS

NUT

NUTC

Page 187

Page 187

Page 188

SPRA

SPRC

SPRD

NEW

Ph: 1-800-333-0852
www.erico.com

173

STRUT, FITTINGS, & ACCESSORIES 15

Page 188

Page 189

Page 190

SPRM

TSNT

SQNT

NEW

Page 190

Page 191

Page 192

VS

STCB

BC16

Page 192

Page 193

Page 193

BC17

BR22

Strut Cover

Page 194

Page 194

Page 195

ENDC

F09

F10-F12

174

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15

Page 195

Page 196

Page 196

F13-F18

F20

F22

Page 197

Page 197

Page 198

F23

F25

F36

Page 198

Page 199

Page 199

F37

L10

L11

Page 200

Page 200

L12

L15

L16-L17

Page 201

Page 202

Page 202

L18

L19-L20

L22

Ph: 1-800-333-0852
www.erico.com

175

Page 201

STRUT, FITTINGS, & ACCESSORIES 15

Page 203

Page 203

Page 204

L23

L24

L25

Page 204

Page 205

Page 205

L26

L27

L44

Page 206

Page 206

Page 207

L46

L47

P09

Page 207

Page 208

Page 208

P10

P11

P13

176

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15

Page 209

Page 209

Page 210

ROL10

ROL11

U10A

Page 210

Page 211

Page 211

U24

W10

W12

Page 212

Page 212

Page 213

W13

W17

W18

Page 213

Page 214

Page 214

W19

W20

W23

Ph: 1-800-333-0852
www.erico.com

177

STRUT, FITTINGS, & ACCESSORIES 15


CADDY ERISTRUT CHANNEL
Model
Number
A12
A14
B12
C12
C14
D12
E12

Width

Height

Gauge

1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8

1-5/8
1-5/8
1-3/8
13/16
13/16
2-7/16
3-1/4

12
14
12
12
14
12
12

Complete CADDY ERISTRUT channel specifications, including Finish, Fittings,


Hardware, Load Applications and Beam and Column Loads Data information is
available in chapter 20 at the end of this catalog.

2"

1-7/8"

4"

HALF SLOT (H)


1-1/8" x 9/16" slots
punched on 2" centers

PUNCH (P)
9/16" holes
punched on 1-7/8" centers

6"

SLOT (S)
3" x 7/16" slots
punched on 4" centers

KNOCKOUT (K)
1/2" knockouts (7/8")
on 6" centers

WELDED
Two or more lengths
tack welded together
("A" configuration shown)

178

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


CADDY ERISTRUT
CHANNEL A12
12 GA Strut
1-5/8 x 1-5/8
For heavy applications
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Surface Finish(es): Pre-galvanized,
painted green, gold chromate, plain
Part
Number

Welded
Configuration

Pre-galvanized Finish
A121000PG
A122000PG
A12A2000PG
A12AH1000PG
A12AH2000PG
A12H1000PG
A12H2000PG
Painted Green Finish
A122000GN
A12A2000GN
A12AH2000GN
A12H1000GN
A12H2000GN
Plain Finish
A122000PL
Gold Chromate Finish
A12H1000CG
A12H2000CG
304 Stainless Steel
A12H1000S4

Ph: 1-800-333-0852
www.erico.com

Hole/Slot
Configuration

Length
(ft)

A
A
A
-

Solid
Solid
Solid
Half Slot
Half Slot
Half Slot
Half Slot

10
20
20
10
20
10
20

A
A
-

Solid
Solid
Half Slot
Half Slot
Half Slot

20
20
20
10
20

Solid

20

Half Slot
Half Slot

10
20

Half Slot

10

179

STRUT, FITTINGS, & ACCESSORIES 15


CADDY ERISTRUT
CHANNEL A14
14 GA Strut
1-5/8 x 1-5/8
For light medium applications
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Surface Finish(es): Pre-galvanized,
painted green
Part
Number

Hole/Slot
Configuration

Pre-galvanized Finish
A14H1000PG
Half
A14H2000PG
Half
Painted Green Finish
A14H1000GN
Half
A14H2000GN
Half

Length
(ft)

Slot
Slot

10
20

Slot
Slot

10
20

CADDY ERISTRUT
CHANNEL B12
12 GA Strut
1-5/8 x 1-3/8
For heavy applications
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Surface Finish(es): Pre-galvanized,
painted green
Part
Number

Hole/Slot
Configuration

Pre-galvanized Finish
B122000PG
Solid
B12H1000PG
Half Slot
B12H2000PG
Half Slot
Painted Green Finish
B122000GN
Solid
B12H2000GN
Half Slot

Length
(ft)
20
10
20
20
20

180

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


CADDY ERISTRUT
CHANNEL C12
12 GA Strut
1-5/8 x 13/16
For medium heavy applications
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Surface Finish(es): Pre-galvanized,
painted green, gold chromate
Part
Number

Hole/Slot
Configuration

Pre-galvanized Finish
C121000PG
C12H1000PG
C12H2000PG
Painted Green Finish
C122000GN
C12H1000GN
C12H2000GN
Gold Chromate Finish
C12H1000CG
Aluminum
C121000AL
C122000AL

Ph: 1-800-333-0852
www.erico.com

Length
(ft)

Solid
Half Slot
Half Slot

10
10
20

Solid
Half Slot
Half Slot

20
10
20

Half Slot

10

Solid
Solid

10
20

181

STRUT, FITTINGS, & ACCESSORIES 15


CADDY ERISTRUT
CHANNEL C14
14 GA Strut
1-5/8 x 13/16
For light medium applications
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Surface Finish(es): Pre-galvanized,
painted green, gold chromate
Part
Number

Hole/Slot
Configuration

Length
(ft)

Pre-galvanized Finish
C141000PG
Solid
C14H1000PG
Half Slot
C14H2000PG
Half Slot
Painted Green Finish
C14H1000GN
Half Slot
C14H2000GN
Half Slot
C14S2000GN
Full Slot
Gold Chromate Finish
C14H1000CG
Half Slot
C14H2000CG
Half Slot
304 Stainless Steel
C141000S4
Solid
C142000S4
Solid
C14H1000S4
Half Slot

10
10
20
10
20
20
10
20
10
20
10

CADDY ERISTRUT
CHANNEL D12
12 GA Strut
1-5/8 x 2-7/16
For heavy applications
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Surface Finish(es):
Pre-galvanized,
painted green

Part
Number

Hole/Slot
Configuration

Pre-galvanized Finish
D122000PG
D12H1000PG
D12H2000PG
Painted Green Finish
D12H1000GN
D12H2000GN
D12S2000GN

182

Length
(ft)

Solid
Half Slot
Half Slot

20
10
20

Half Slot
Half Slot
Full Slot

10
20
20

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


CADDY ERISTRUT
CHANNEL E12
12 GA Strut
1-5/8 x 3-1/4
For heavy applications
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Surface Finish(es): Pre-galvanized,
painted green
Part
Number

Hole/Slot
Configuration

Pre-galvanized Finish
E12H1000PG
E12H2000PG
Painted Green Finish
E122000GN
E12H1000GN
E12H2000GN

Length
(ft)

Half Slot
Half Slot

10
20

Solid
Half Slot
Half Slot

20
10
20

CADDY ERISTRUT
CHANNEL CONC
12 GA Continuous Concrete
Insert Channel
For individual fastening or for
efficiently constructing pipe or
tube routes
Standard lengths: 10, 20
Standard Surface Finish: Pre-galvanized
Part
Number

Hole/Slot
Configuration

Pre-galvanized Finish
CONA122000PG
Half Slot
CONB122000PG
Half Slot
CONC122000PG
Half Slot

Ph: 1-800-333-0852
www.erico.com

Length
(ft)
20
20
20

183

STRUT, FITTINGS, & ACCESSORIES 15


CADDY SLICK STRUT NUT

NEW

One-piece Strut Nut


Size Range: 1/4, 3/8 and 1/2
thread sizes
Surface Finish: Dacromet 320
Provides fast, universal attachment
of threaded rod and hardware to
standard strut profiles
Unique 1-piece design
Eliminates the need for a washer
Fits all standard strut depths
For use in indoor, outdoor and mildly
corrosive environments
Part
Number

Thread
Size

SLICK250 1/4 - 20 1-11/16 1-1/8


SLICK375 3/8 - 16 1-11/16 1-1/8
SLICK500 1/2 - 13 1-11/16 1-1/8

C
7/8
7/8
7/8

F1 Max. Rec. F2 Max. Rec. Recommended


Load (lbs)
Load (lbs)
Torque
200
450
550

800
1100
1250

5 ft. lbs.
15 ft. lbs.
20 ft. lbs.

F1
LOAD

F2
LOAD

Features
Installs with one hand
No more hard-to-handle spring nuts
Reduce installation time and inventory by over 75%
Integral plastic strip provides tension to grip the strut, even vertically
Allows for easy repositioning or removal

184

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


CADDY CHANNEL CLAMP
STS (STRUT-TO-STRUT)

NEW

Strut-to-Strut Clamp
Surface Finish: Electro-zinc plated
Provides fast assembly of back-to-back
half-slot strut as an alternative to
welded strut
Unique one-piece assembly eliminates
the need for washers, bolts and nuts
For new or retrofit applications
Allows joining of dissimilar half-slot
channel, regardless of profile size or finish
Easy installation with a 1/2 nut driver
Part
Number

Max. Working
Load (lbs)

Recommended
Torque

STS

1.00

1/2

1-1/4

1000

5 ft. lbs.

*1000 lbs working load per total assembly (5:1 safety factor). Not to exceed 1000 lbs.
Half-slot dimensions vary by manufacturer. Minimum half-slot dimensions 9/16 x 7/8.
Strut type and structure need to be evaluated to establish load for assembly. Use 1 STS
per 1 ft. of strut, minimum of 2 required.

1/2 nut
driver
or socket

Ph: 1-800-333-0852
www.erico.com

185

STRUT, FITTINGS, & ACCESSORIES 15


CHANNEL NUT NUT
Without Spring
Size Range: #8, #10, 1/4, 5/16,
3/8, 1/2, 5/8, 3/4 and 7/8
thread sizes
Surface Finish: Electro-zinc plated
Fits A, B, D, E and M channels
Also available in 304 Stainless Steel
for 1/4, 3/8 and 1/2 sizes
Part
Number
NUT0008EG
NUT0010EG
NUT0025EG
NUT0031EG
NUT0037EG
NUT0050EG
NUT0062EG
NUT0075EG
NUT0087EG

Thread
Size

#8 32
#10 24
1/4- 20
5/16 18
3/8 16
1/2 - 13
5/8 11
3/4 - 10
7/8 9

1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8

3/4
3/4
3/4
3/4
3/4
3/4
1-1/8
1-1/8
1-1/8

1/4
1/4
1/4
1/4
3/8
1/2
1/2
1/2
1/2

A
C

CHANNEL NUT NUTC


Without Spring
Size Range: 1/2, 5/8, 3/4 and 7/8
thread sizes
Surface Finish: Electro-zinc plated
Fits C channel
Also available in 304 Stainless Steel
for 1/4, 3/8 and 1/2 sizes
Part
Number
NUTC0050EG
NUTC0062EG
NUTC0075EG
NUTC0087EG

Thread
Size

1/2 - 13
5/8 11
3/4 - 10
7/8 9

1-3/8
1-3/8
1-3/8
1-3/8

3/4
1-1/8
1-1/8
1-1/8

C
3/8
3/8
3/8
3/8

186

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


CHANNEL NUT SPRA
Spring Nut
Size Range: #8, #10, 1/4, 5/16,
3/8, 1/2, 5/8, 3/4 and 7/8
thread sizes
Surface Finish: Electro-zinc plated
Fits A, B, and M channels
Also available in 304 Stainless Steel
for 1/4, 3/8 and 1/2 sizes
Part
Number

Thread
Size

SPRA0008EG #8 32
SPRA0010EG #10 24
SPRA0025EG 1/4 - 20
SPRA0031EG 5/16 18
SPRA0037EG 3/8 16
SPRA0050EG 1/2 - 13
SPRA0062EG 5/8 11
SPRA0075EG 3/4 - 10
SPRA0087EG 7/8 9

1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8

3/4
3/4
3/4
3/4
3/4
3/4
1-1/8
1-1/8
1-1/8

1/4
1/4
1/4
1/4
3/8
1/2
1/2
1/2
1/2

(1 1" )
2

CHANNEL NUT SPRC


Spring Nut
Size Range: #8, #10, 1/4, 5/16,
3/8, 1/2, 5/8, 3/4
and 7/8 thread sizes
Surface Finish: Electro-zinc plated
Fits C & M channels
Also available in 304 Stainless Steel
for 1/4, 3/8 and 1/2 sizes
Part
Number
SPRC0008EG
SPRC0010EG
SPRC0025EG
SPRC0031EG
SPRC0037EG
SPRC0050EG
SPRC0062EG
SPRC0075EG
SPRC0087EG

Thread
Size

#8 32
#10 24
1/4 - 20
5/16 18
3/8 16
1/2 - 13
5/8 11
3/4 - 10
7/8 9

1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8

3/4
3/4
3/4
3/4
3/4
3/4
1-1/8
1-1/8
1-1/8

1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8

Ph: 1-800-333-0852
www.erico.com

187

21"
( 32
)

STRUT, FITTINGS, & ACCESSORIES 15


CHANNEL NUT SPRD
Spring Nut
Size Range: #8, #10, 1/4, 5/16,
3/8, 1/2, 5/8 and 3/4
thread sizes
Surface Finish: Electro-zinc plated
Fits D and E channels
Part
Number

Thread
Size

SPRD0025EG

1/4 - 20

1-3/8

3/4

1/4

SPRD0037EG

3/8 16

1-3/8

3/4

3/8

SPRD0050EG

1/2 - 13

1-3/8

1-1/8

1/2

SPRD0062EG

5/8 11

1-3/8

1-1/8

1/2

SPRD0075EG

3/4 - 10

1-3/8

1-1/8

1/2

1"

(2 2 )

CHANNEL NUT SPRM


Spring Nut with Stud
Size Range: 1/4, 5/16, 3/8, 1/2
and 5/8 thread sizes
Surface Finish: Electro-zinc plated
Fits A, B, and M channels

Part
Number

Thread
Size

Stud
Length

SPRM2508EG
SPRM2511EG
SPRM2515EG
SPRM3708EG
SPRM3711EG
SPRM3716EG
SPRM3718EG
SPRM3721EG
SPRM5011EG
SPRM5013EG

1/4 - 20
1/4 - 20
1/4 - 20
3/8 16
3/8 16
3/8 16
3/8 16
3/8 16
1/2 - 13
1/2 - 13

7/8
1-1/8
1-1/2
7/8
1-1/8
1-5/8
1-7/8
2-1/8
1-1/8
1-3/8

1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8

3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4

1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2

188

STUD
LENGTH
C

(1 1"
)
2

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


CHANNEL NUT TSNT
Top Spring Nut
Size Range: 1/4, 3/8 and 1/2
thread sizes
Surface Finish: Electro-zinc plated
Fits A, B, C, D, E and
M channels
Part
Number

Thread
Size

TSNT0025EG

1/4 - 20

1-3/8

3/4

1/4

TSNT0037EG

3/8 16

1-3/8

3/4

3/8

TSNT0050EG

1/2 - 13

1-3/8

3/4

1/2

Fastener
Size

1/4-20

5/16-18

3/8-16

32

1/2-13

Foot-lbs

11

19

50

Nm

(8)

(15)

(26)

(68)

(5")
A

RESISTANCE TO SLIP
Thread
Size

Part
Number

Channel
Size

#8 32

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, D, E, M

50

50

50

#10 24

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, D, E, M

100

100

100

NUT, NUTC, SPRA, SPRC, SPRD, TSNT A, B, C, D, E, M

300

1/4 - 20

12 GA
(lbs)

14 GA
(lbs)

16 GA
(lbs)

300

300

A, B, C, D, E, M

450

450

450

3/8 16

NUT, NUTC, SPRA, SPRC, SPRD, TSNT A, B, C, D, E, M

800

800

800

1/2 - 13

NUT, NUTC, SPRA, SPRC, SPRD, TSNT

A, B, C, M

1500

1000

1000

5/8 11

NUT, NUTC, SPRA, SPRC, SPRD

D, E

1500

1000

1000

3/4 - 10

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, M

1500

1000

1000

7/8 9

NUT, NUTC, SPRA, SPRC, SPRD

D, E

1500

1000

1000

5/16 18

NUT, NUTC, SPRA, SPRC, SPRD

PULL OUT STRENGTH


Thread
Size

Part
Number

Channel
Size

12 GA
(lbs)

14 GA
(lbs)

16 GA
(lbs)

#8 32

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, D, E, M

200

200

200

#10 24

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, D, E, M

250

250

250

NUT, NUTC, SPRA, SPRC, SPRD, TSNT A, B, C, D, E, M

450

450

450

1/4 - 20
5/16 18

A, B, C, D, E, M

750

750

750

3/8 16

NUT, NUTC, SPRA, SPRC, SPRD, TSNT A, B, C, D, E, M

NUT, NUTC, SPRA, SPRC, SPRD

1100

1000

1000

1/2 - 13

NUT, NUTC, SPRA, SPRC, SPRD, TSNT

A, B, C, M

2000

1400

1000

1/2 - 13

NUT, NUTC, SPRA, SPRC, SPRD, TSNT

D, E

1500

1400

1000

5/8 11

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, M

2000

1400

1000

5/8 11

NUT, NUTC, SPRA, SPRC, SPRD

D, E

1500

1400

1000

3/4 - 10

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, M

2000

1400

1000

3/4 - 10

NUT, NUTC, SPRA, SPRC, SPRD

D, E

1500

1400

1000

7/8 9

NUT, NUTC, SPRA, SPRC, SPRD

A, B, C, M

2000

1400

1000

7/8 9

NUT, NUTC, SPRA, SPRC, SPRD

D, E

1500

1400

1000

Ph: 1-800-333-0852
www.erico.com

189

STRUT, FITTINGS, & ACCESSORIES 15


HARDWARE NUT SQNT
Square Nut
Size Range: 1/4, 3/8, 1/2 and
5/8 thread sizes
Surface Finish: Electro-zinc plated
Part
Number

Thread
Size

SQNT0025EG
SQNT0037EG
SQNT0050EG
SQNT0062EG

1/4 - 20
3/8 16
1/2 - 13
5/8 - 11

VERTICAL ROD
STIFFENER VS
Threaded Rod Support
Size Range: 1/2 rod size
Surface Finish: Electro-zinc plated
Fits A, B, D, and E channels

Part
Number
VS0050EG

Thread
Size

1/2 - 13

1-3/8

13/16

1-5/8

B
A

190

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT BEAM CLAMP STCB
Channel to Beam Clamp STCB
Size Range: 3/8 rod size

NEW

Surface Finish: Electro-zinc plated


Structural attachment to beams to
support threaded rod and/or strut
Maximum flange thickness: 3/4
when used with 1-5/8 strut and
1-5/8 when used with 13/16 strut
Part
Number
STCB6

RS

Max. Rec.
Load (lbs.)*

3/8-16

3-13/16

1-15/16

1-5/32

400

* Load rating is per fastener

Finishes available:

Ph: 1-800-333-0852
www.erico.com

191

STRUT, FITTINGS, & ACCESSORIES 15


STRUT BEAM CLAMP BC16
Channel to Beam Clamp
Surface Finish: Electro-zinc plated
Structural attachment to beams to
support strut
Fits A and D channels

Part
Number

BC16A000EG
BC16C000EG

3-1/2
2-11/16

3-1/2
3-1/2

1-3/4
15/16

Max. Rec.
Load (lbs.)*
900
900

* When used in pairs

C
B

STRUT BEAM CLAMP BC17


Channel to Beam Clamp
Surface Finish: Electro-zinc plated
Structural attachment to beams to
support strut
Fits A and D channels

Part
Number

Max. Rec.
Load (lbs.)*

BC17A000EG
BC17D000EG

3-3/8
5

3
3

1200
1200

* When used in pairs

B
A

192

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


CHANNEL BRACKET BR22
Strut Bracket
Surface Finish: Electro-zinc plated
Strut bracket that attaches to strut
Fits all standard strut depths

Part
Number

Max. Rec.
Uniform
Load (lbs.)

BR220600EG
BR221200EG
BR221800EG
BR222400EG
BR223000EG
BR223600EG

4-5/8
4-5/8
4-5/8
4-5/8
4-5/8
4-5/8

6
12
18
24
30
36

1800
1000
700
500
350
300
B

STRUT COVER
Closure Strip for Channels
Fits all standard strut profiles
Available in plastic, EG, Green
and Cal-Gold color
Part
Number

Color

CL100000EG
CL100000PS
CL100000GN
CL100000CG

EG
Plastic
Green
Cal-Gold

Ph: 1-800-333-0852
www.erico.com

193

STRUT, FITTINGS, & ACCESSORIES 15


STRUT END CAPS ENDC
Fits A, B, C, D, E and M
strut profiles
Surface Finish: Electro-zinc plated
Part
Number

Strut
GA

ENDCA120EG
ENDCA140EG
ENDCB120EG
ENDCC140EG
ENDCE120EG

A12
A14
B12
C14
E12

1-5/8
1-5/8
1-3/8
13/16
3-1/4

STRUT SPLICE PLATE F09


Two-hole Splice Plate
Surface Finish: Electro-zinc plated

Part
Number
F090000EG

3-1/2

1-5/8

9/16" DIA.

B
A

194

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT WASHER F10 F12
Notched Channel Washer
Surface Finish: Electro-zinc plated

Part
Number
F100000EG
F110000EG
F120000EG
F120062EG
F120075EG

HS

Bolt
Size

3/8
7/16
9/16
11/16
13/16

5/16
3/8
1/2
5/8
3/4

5"
18

5"
18

HS

STRUT WASHER F13 F18


Square Channel Washer
Surface Finish: Electro-zinc plated

Part
Number
F130000EG
F140000EG
F150000EG
F160000EG
F170000EG
F180000EG

HS

Bolt
Size

3/8
7/16
9/16
11/16
13/16
15/16

5/16
3/8
1/2
5/8
3/4
7/8

5"
18

5"
18

HS

Ph: 1-800-333-0852
www.erico.com

195

STRUT, FITTINGS, & ACCESSORIES 15


STRUT SPLICE PLATE F20
Three-hole Splice Plate
Surface Finish: Electro-zinc plated

Part
Number
F200000EG

5-3/8

1-5/8

9/16" DIA.

STRUT SPLICE PLATE F22


Two-hole Splice Plate
Surface Finish: Electro-zinc plated

Part
Number
F220000EG

3-1/4

1-5/8

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

196

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT SPLICE PLATE F23
Four-hole Splice Plate
Surface Finish: Electro-zinc plated

Part
Number
F230000EG

7-1/4

1-5/8

9/16" DIA.

A
B

STRUT GUSSET PLATE F25


Four-hole Tee Gusset Plate
Surface Finish: Electro-zinc plated

Part
Number
F250000EG

5-3/8

3-1/2

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

197

STRUT, FITTINGS, & ACCESSORIES 15


STRUT HALF TEE PLATE F36
Three-hole Half Tee Plate
Surface Finish: Electro-zinc plated

Part
Number
F360000EG

A
3-1/2

B
3-1/2

9/16" DIA.

STRUT HALF TEE PLATE F37


Four-hole Half Tee Plate
Surface Finish: Electro-zinc plated

Part
Number
F370000EG

3-1/2

5-3/8

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

198

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L10
Two-hole Corner Angle
Surface Finish: Electro-zinc plated

Part
Number
L100000EG

2-1/4

1-5/8

9/16" DIA.

A
B

STRUT ANGLE L11


Two-hole Corner Angle
Surface Finish: Electro-zinc plated

Part
Number
L110000EG

1-7/8

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

199

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L12
Two-hole Corner Angle
Surface Finish: Electro-zinc plated
Part
Number
L120300EG
L120350EG
L120400EG

3
3-1/2
4

1-7/8
1-7/8
1-7/8
B

9/16" DIA.
9/16"

STRUT ANGLE L15


One-slot / One-hole Angle
Surface Finish: Electro-zinc plated

Part
Number
L150000EG

2-5/8

1-5/8

9/16" W x 1-1/2" Slot

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

200

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L16 - L17
One-slot / One-hole Angle
Surface Finish: Electro-zinc plated

Part
Number
L160000EG
L170000EG

4-7/8
6-7/8

1-7/8
1-7/8

2-1/2
4-1/4

B
C

9/16" DIA.
9/16" W x 2-1/2" Slot

STRUT ANGLE L18


Three-hole Corner Angle
Surface Finish: Electro-zinc plated

Part
Number
L180000EG

3-1/2

2-1/2

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

201

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L19 - L20
Three-hole Corner Angle
Surface Finish: Electro-zinc plated
Part
Number
L190000EG
L200000EG

3-7/8
4-1/8

1-7/8
1-5/8

9/16" DIA.

STRUT ANGLE L22


Four-hole Corner Angle
Surface Finish: Electro-zinc plated

Part
Number
L220000EG

4-1/8

3-1/2

9/16" DIA.

B
FITTING SPECIFICATIONS (unless noted otherwise):
Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

202

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L23
Seven-hole Corner Angle
Surface Finish: Electro-zinc plated

Part
Number
L23U0000EG

4-1/8

4-1/8

B
9/16" DIA.

STRUT ANGLE L24


Six-hole Corner Angle
Surface Finish: Electro-zinc plated
Available for left or right hand use
(right hand shown)

Part
Number
L24L0000EG
L24R0000EG

5-3/8
5-3/8

4-1/8
4-1/8

3-1/2
3-1/2

C
B
9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

203

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L25
Four-hole Offset Corner Angle
Surface Finish: Electro-zinc plated
Available for left or right hand use
(right hand shown)

Part
Number
L25L0000EG
L25R0000EG

3-3/4
3-3/4

3-1/2
3-1/2

1-7/8
1-7/8

9/16" DIA.

STRUT ANGLE L26


Three-hole Offset Corner Angle
Surface Finish: Electro-zinc plated
Available for left or right hand use
(right hand shown)

Part
Number

L26L0000EG
L26R0000EG

3-1/2
3-1/2

2
2

A
B

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

204

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L27
Four-hole Offset Corner Angle
Surface Finish: Electro-zinc plated

Part
Number
L270000EG

5-3/8

1-15/16

9/16" DIA.

STRUT ANGLE L44


Two-hole 45 Angle
Surface Finish: Electro-zinc plated

Part
Number
L441200EG
L441600EG
L441800EG

12
16
18

10-1/2
13-5/16
14-3/4

9/16" DIA.

B
A

B
FITTING SPECIFICATIONS (unless noted otherwise):
Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

205

STRUT, FITTINGS, & ACCESSORIES 15


STRUT ANGLE L46
Two-hole Open Angle
Surface Finish: Electro-zinc plated
May be ordered with A angle of
30, 45 or 60

Part
Number
L460300EG
L460450EG
L460600EG

30
45
60

3-3/16
3-5/32
3-3/32

2-5/32
2-1/4
2-9/32

B
A
C

9/16" DIA.

STRUT ANGLE L47


Two-hole Closed Angle
Surface Finish: Electro-zinc plated
May be ordered with A angle of
30, 45, 60 or 82.5

Part
Number
L470300EG
L470450EG
L470600EG
L470825EG

30
45
60
82.5

3-1/2
3-1/2
3-1/2
3-1/2

2-1/2
2-1/2
2-1/2
2-1/2
A

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

206

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT POST BASE P09
Post Base for A Channel
Surface Finish: Electro-zinc plated

Part
Number

P090000EG

3-1/2

3-1/2

3/4" DIA.

STRUT POST BASE P10


Post Base for A Channel
Surface Finish: Electro-zinc plated

Part
Number

P100000EG

1-5/8
C

3/4" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

207

STRUT, FITTINGS, & ACCESSORIES 15


STRUT POST BASE P11
Post Base for A Channel
Surface Finish: Electro-zinc plated

Part
Number

P110000EG

C
3-1/2

3/4" DIA.

STRUT POST BASE P13


Post Base for Welded Channel
Surface Finish: Electro-zinc plated

Part
Number
P130000EG

3-1/2
C

3/4" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

208

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT TROLLEY ROL10
Single Trolley
Surface Finish: Electro-zinc plated
For use with A12, A14, D12 or
E12 channels
Wheels: 1-3/8 diameter
Part
Number
ROL10000EG

3-1/2

1-5/8

9/16" DIA.

STRUT TROLLEY ROL11


Double Trolley
Surface Finish: Electro-zinc plated
For use with A12, A14, D12 or
E12 channels
Wheels: 1-3/8 diameter
Part
Number
ROL11000EG

3-11/16

3-1/2

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

209

STRUT, FITTINGS, & ACCESSORIES 15


STRUT SUPPORT U10A
Three-hole Channel Support
Surface Finish: Electro-zinc plated
For use with A channels

Part
Number
U10A0000EG

5-3/8

1-5/8

1-3/4

A
C

9/16" DIA.

STRUT SPLICE U24


Four-hole Splice
Surface Finish: Electro-zinc plated
For use with A, C and D channels

Part
Number
U24A0000EG
U24C0000EG
U24D0000EG

Channel
Type

1-5/8
13/16
2-7/16

7-1/4
7-1/4
7-1/4

A
C
D

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

210

9/16" DIA.

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT CORNER
CONNECTOR W10
2-hole Single Corner Connector
Surface Finish: Electro-zinc plated
Available for left or right hand
use (right hand shown)

Part
Number
W10L0000EG
W10R0000EG

1-3/4
1-3/4

3-1/2
3-1/2

1-7/8
1-7/8
B
9/16" DIA.

STRUT CORNER
CONNECTOR W12
4-hole Double Corner
Connector
Surface Finish: Electro-zinc plated

Part
Number

W120000EG

3-1/2

3-1/2

1-7/8

B
A

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

211

STRUT, FITTINGS, & ACCESSORIES 15


STRUT CORNER
CONNECTOR W13
Six-hole Double Corner
Connector
Surface Finish: Electro-zinc plated

Part
Number

W130000EG

3-3/4

3-3/4

3-7/8

9/16" DIA.
B

STRUT CORNER
CONNECTOR W17
Eight-hole Double Corner
Connector
Surface Finish: Electro-zinc plated

Part
Number
W170000EG

1-3/4

5-13/32

3-3/4
A

9/16" DIA.

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

212

Ph: 1-800-333-0852
www.erico.com

STRUT, FITTINGS, & ACCESSORIES 15


STRUT CORNER
CONNECTOR W18
Ten-hole Double Corner
Connector
Surface Finish: Electro-zinc plated

Part
Number
W180000EG

1-3/4

9-5/32

3-3/4

A
B
9/16" DIA.

STRUT WING
CONNECTOR W19
Six-hole Triple Wing Connector
Surface Finish: Electro-zinc plated

Part
Number
W190000EG

3-1/2

5-7/16

9/16" DIA.
B

C
FITTING SPECIFICATIONS (unless noted otherwise):
Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

Ph: 1-800-333-0852
www.erico.com

213

STRUT, FITTINGS, & ACCESSORIES 15


STRUT WING
CONNECTOR W20
Nine-hole Triple Wing
Connector
Surface Finish: Electro-zinc plated

Part
Number
W200000EG

3-1/2

5-7/16

3-3/4

9/16" DIA.

STRUT GUSSET
CONNECTOR W23
Eight-hole Double Gusset
Connector
Surface Finish: Electro-zinc plated

Part
Number
W230000EG

5-3/8

5-3/8

3-3/4
9/16" DIA.

A
B
C

FITTING SPECIFICATIONS (unless noted otherwise):


Hole sizes 9/16, Spacing 13/16 from edge and 1-7/8 on center
Width 1-5/8, Thickness 1/4, Standard Finish: EG

214

Ph: 1-800-333-0852
www.erico.com

STAINLESS STEEL PRODUCTS

Page 216

Page 217

Page 218

105

406

305

Page 219

Page 220

Page 221

150

OD

RIGD

Ph: 1-800-333-0852
www.erico.com

215

16

STAINLESS STEEL PRODUCTS

16

SWIVEL LOOP HANGER 105


304 Stainless Steel Band Hanger
Size Range: 1/2 through 8
Recommended for the suspension of
stationary stainless steel pipe lines
Conforms with Federal Specification
WW-H-171 (Type 10), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 10)
NOTE: Swivel nut not furnished with hanger.

Stainless steel hex nuts recommended for use with hanger


Part
Number
1050050S4
1050075S4
1050100S4
1050125S4
1050150S4
1050200S4
1050250S4
1050300S4
1050350S4
1050400S4
1050500S4
1050600S4
1050800S4

Nominal
Pipe Size

Max. Rec.
Load (lbs.)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"

7/16
7/16
7/16
7/16
7/16
7/16
9/16
9/16
9/16
11/16
11/16
13/16
13/16

2-3/16
3-1/16
3-5/16
3-5/8
4
4-3/8
4-7/8
5-1/2
6
6-1/2
7-9/16
8-5/8
10-5/8

610
610
610
610
610
610
970
970
970
1250
1250
1600
1800

216

Ph: 1-800-333-0852
www.erico.com

STAINLESS STEEL PRODUCTS

16

CLEVIS HANGER 406


Standard Duty 304 Stainless Steel
Size Range: 1/2 through 18
Recommended for the suspension of
stationary non-insulated stainless steel
pipe lines
Conforms with Federal Specification
WW-H-171 (Type 1), Manufacturers
Standardization Society (MSS) SP-58
and SP-69 (Type 1)
Part
Number
4060050S4
4060075S4
4060100S4
4060125S4
4060150S4
4060200S4
4060250S4
4060300S4
4060350S4
4060400S4
4060500S4
4060600S4
4060800S4
4061000S4
4061200S4
4061400S4
4061600S4
4061800S4

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs.)

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
5"
6"
8"
10"
12"
14"
16"
18"

3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
7/8
1
1
1-1/8

2-1/8"
2-3/8"
2-3/4"
3-5/16"
3-15/16"
4-1/2"
5-1/4"
6"
6-1/2"
7-3/4"
9-3/4"
11-3/4"
14"
16-1/2"
18-5/8"
21-3/4"
24"
26-3/4"

1-5/8"
1-3/4"
2-1/16"
2-3/8"
2-15/16"
3-1/4"
3-1/4"
4-1/8"
4-7/16"
5-3/8"
6-13/16"
8-1/4"
9-1/2"
10-7/8"
12"
14-1/2"
15-3/4"
17-1/2"

610
610
610
610
610
610
1130
1130
1130
1130
1430
1940
2000
3600
3800
4200
4600
4800

RS

B
A

Ph: 1-800-333-0852
www.erico.com

217

STAINLESS STEEL PRODUCTS

16

BEAM CLAMP 305


304 Stainless Steel Top Mount
Beam Clamp
Size Range: 3/8 and 1/2 rod sizes
Structural attachment to top flange
of metal beams, purlins, channel, or
angle iron where the flange thickness
does not exceed 5/8
Conforms with Federal Specification
WW-H-171 (Type 23), Manufacturers
Standardization Society ANSI/MSS-SP-58
(Type 19 & 23), install in accordance with
ANSI/MSS-SP-69
NOTE: Set screw must be tightened and
torqued to 60-inch pounds onto the sloped side
of the I-beam, channel, or angle iron flange.
Part
Number
3050037S4
3050050S4

RS

Set
Screw

Max. Rec.
Load (lbs.)

3/8
1/2

3/4
3/4

7/8
7/8

3/8
3/8

500
1130

B
A

RS
SET SCREW

218

Ph: 1-800-333-0852
www.erico.com

STAINLESS STEEL PRODUCTS

16

PIPE FIXINGS 150


304 Stainless Steel Standard
U-bolt
Size Range: 1/2 through 18
Pipe support for general piping
applications
Comes with two nuts installed on
each end of U-bolt
Part
Number

Nominal
Pipe Size

RS

Max. Rec.
Load (lbs.)

150M0050S4
150M0075S4
150M0100S4
150M0125S4
150M0150S4
150M0200S4
150M0250S4
150M0300S4
150M0400S4
150M0500S4
150M0600S4
150M0800S4
150M1000S4
150M1200S4
150M1400S4
150M1600S4
150M1800S4

1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
2-1/2"
3"
4"
5"
6"
8"
10"
12"
14"
16"
18"

1/4"
1/4"
1/4"
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
5/8"
5/8"
3/4"
7/8"
7/8"
7/8"
1"

3-1/2"
3-9/16"
3-11/16"
4-1/8"
4-5/16"
4-13/16"
5-3/4"
6-5/16"
7-5/16"
8-5/16"
10-1/8"
12-1/8"
14-9/16"
16-15/16"
18-3/16"
20-3/16"
22-11/16"

435
435
435
1090
1090
1090
2020
2020
2020
2020
3230
3230
4830
6730
6730
6730
8850

RS

Ph: 1-800-333-0852
www.erico.com

219

STAINLESS STEEL PRODUCTS

16

STRUT PIPE CLAMPS OD


304 Stainless Steel Four-piece
Strut Clamps
Size Range: 1/4 thru 8-5/8
Other sizes available upon request
Four-piece design includes slotted
hex head machine screw and
square nut
Part
Number
OD0025S4
OD0037S4
OD0050S4
OD0062S4
OD0075S4
OD0087S4
OD0100S4
OD0112S4
OD0125S4
OD0137S4
OD0150S4
OD0162S4
OD0175S4
OD0187S4
OD0200S4
OD0212S4
OD0225S4
OD0237S4
OD0250S4
OD0262S4
OD0275S4
OD0287S4
OD0300S4
OD0312S4
OD0325S4
OD0337S4
OD0350S4
OD0362S4
OD0375S4
OD0387S4
OD0400S4
OD0412S4
OD0425S4
OD0437S4
OD0450S4
OD0462S4
OD0475S4
OD0487S4

OD Size Strap
(in)
GA
1/4
3/8
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
2-3/8
2-1/2
2-5/8
2-3/4
2-7/8
3
3-1/8
3-1/4
3-3/8
3-1/2
3-5/8
3-3/4
3-7/8
4
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
4-3/4
4-7/8

17GA
17GA
17GA
17GA
17GA
17GA
15GA
15GA
15GA
15GA
15GA
15GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
13GA
12GA
12GA
12GA
12GA
12GA
12GA
12GA
12GA
12GA
12GA
12GA

Max. Rec.
Load (lbs.)

Part
Number

OD Size
(in)

Strap
GA

Max. Rec.
Load (lbs.)

400
400
400
400
400
400
600
600
600
600
600
600
800
800
800
800
800
800
800
800
800
800
800
800
800
800
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000

OD0500S4
OD0512S4
OD0525S4
OD0537S4
OD0550S4
OD0562S4
OD0575S4
OD0587S4
OD0600S4
OD0612S4
OD0625S4
OD0637S4
OD0650S4
OD0662S4
OD0675S4
OD0687S4
OD0700S4
OD0712S4
OD0725S4
OD0737S4
OD0750S4
OD0762S4
OD0775S4
OD0787S4
OD0800S4
OD0812S4
OD0825S4
OD0837S4
OD0850S4
OD0862S4

5
5-1/8
5-1/4
5-3/8
5-1/2
5-5/8
5-3/4
5-7/8
6
6-1/8
6-1/4
6-3/8
6-1/2
6-5/8
6-3/4
6-7/8
7
7-1/8
7-1/4
7-3/8
7-1/2
7-5/8
7-3/4
7-7/8
8
8-1/8
8-1/4
8-3/8
8-1/2
8-5/8

12GA
12GA
12GA
12GA
12GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA
10GA

1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000

1-1/4"

220

Ph: 1-800-333-0852
www.erico.com

STAINLESS STEEL PRODUCTS

16

STRUT PIPE CLAMPS RIGD


304 Stainless Steel Heavy Duty
Strut Clamps
Size Range: 3/8 thru 8
1-piece break apart design (1/2 thru
4 pipe size) includes captive combo
head machine screw and built in nut
(thread impression)
Part
Number
RIGD0037S4
RIGD0050S4
RIGD0075S4
RIGD0100S4
RIGD0125S4
RIGD0150S4
RIGD0200S4
RIGD0250S4
RIGD0300S4
RIGD0350S4
RIGD0400S4
RIGD0500S4
RIGD0600S4
RIGD0800S4

Nominal
Pipe Size

O.D.

3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8

.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625

Screw
GA
17
14
14
14
14
12
12
12
12
11
11
12
10
10

GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA
GA

Max. Rec.
Load (lbs.)
400
400
600
600
600
800
800
800
800
1000
1000
1000
1000
1000

OD

1-1/4"

Ph: 1-800-333-0852
www.erico.com

221

222

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

Page 226

Page 226

Page 227

304B2

005

10

Page 227

Page 228

Page 228

10H

11

12

Page 229

Page 230

Page 230

50

51

25

Page 231

Page 231

Page 232

25S

25R

41

Page 232

Page 233

Page 233

42

43

100A

Ph: 1-800-333-0852
www.erico.com

223

17

RODS, PLATES & HARDWARE

Page 233

Page 234

Page 235

145

Hardware Anchors HMZ

345R

Page 235

Page 236

Page 236

RAWL

26

30

Page 237

Page 237

Page 238

31

SWF

35

Page 238

Page 239

Page 239

SWFF

40

SWM

224

17

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

Page 240

Page 240

Page 241

47

SWMF

HSCR

Page 241

Page 242

Page 242

85

80

15

Page 243

Page 243

Page 244

740

4H

ESGP

Page 244

MSP

Ph: 1-800-333-0852
www.erico.com

225

17

RODS, PLATES & HARDWARE

17

PROTECTION PLATE 304B2


Press-on Nail Plate for Wood
or Metal Studs
Size Range: 3-1/8 x 1-1/2
Surface Finish: Zinc phosphate
For wood or metal studs
Press-on installation; no tools required
Protects plumbing and fire protection
piping
Breakable tabs permit multiple plates
to be ganged together
NOTE: Holes on legs and surface of plate
are provided to secure with nail or screw
Part
Number
304B2

Material

3/16" DIA.

16 gauge steel
3-1/8"

1-1/2"

PROTECTION PLATE 005


Hammer-on Nail Plate for
Wood Studs
Surface Finish: Plain
Protects plumbing and fire protection
piping in wood studs

Part
Number

Size

Material

005275150PL 2-3/4 x 1-1/2 16 gauge steel


005325275PL 3-1/4 x 2-3/4 16 gauge steel
005550150PL 5-1/2 x 1-1/2 16 gauge steel

226

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE


HARDWARE NUT 10
Steel Hex Nut
Size Range: 1/4 thru 7/8
Surface Finish: Plain and
Electro-zinc plated
Part
Number

Size

Plain Finish
0100025PL
1/4 UNC
0100037PL
3/8 UNC
0100050PL
1/2 UNC
0100062PL
5/8 UNC
0100075PL
3/4 UNC
0100087PL
7/8 UNC
Electro-zinc Plated Finish
0100025EG
1/4 UNC
0100037EG
3/8 UNC
0100050EG
1/2 UNC
0100062EG
5/8 UNC
0100075EG
3/4 UNC
0100087EG
7/8 UNC

HARDWARE NUT 10H


Heavy Duty Steel Hex Nut
Size Range: 1/4 thru 7/8
Surface Finish: Plain and
Electro-zinc plated
Part
Number

Size

Plain Finish
010H0025PL
1/4 UNC
010H0037PL
3/8 UNC
010H0050PL
1/2 UNC
010H0062PL
5/8 UNC
010H0075PL
3/4 UNC
010H0087PL
7/8 UNC
Electro-zinc Plated Finish
010H0025EG 1/4 UNC
010H0037EG 3/8 UNC
010H0050EG 1/2 UNC
010H0062EG 5/8 UNC
010H0075EG 3/4 UNC
010H0087EG 7/8 UNC

Ph: 1-800-333-0852
www.erico.com

227

17

RODS, PLATES & HARDWARE

17

HARDWARE WASHER 11
Round Steel Flat Washer
Size Range: 1/4 thru 7/8
Surface Finish: Plain and
Electro-zinc plated

Part
Number
Plain Finish
0110025PL
0110037PL
0110050PL
0110062PL
0110075PL
0110087PL
Electro-zinc Plated
0110025EG
0110037EG
0110050EG
0110062EG
0110075EG
0110087EG

Size

ID

OD

1/4
3/8
1/2
5/8
3/4
7/8
Finish
1/4
3/8
1/2
5/8
3/4
7/8

5/16
7/16
9/16
11/16
13/16
15/16

3/4
1
1-3/8
1-3/4
2
2-1/4

5/16
7/16
9/16
11/16
13/16
15/16

3/4
1
1-3/8
1-3/4
2
2-1/4

OD

ID

OD

ID

HARDWARE WASHER 12
Steel Fender Washer
Size Range: 1/4, 3/8 and 1/2
Surface Finish: Electro-zinc plated

Part
Number

Size

ID

OD

0120025EG
0120037EG
0120050EG

1/4
3/8
1/2

5/16
7/16
9/16

1-1/16
1-1/2
2

228

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

17

HARDWARE THREADED
ROD 50
All Thread Rod
Size Range: 1/4 thru 7/8
Surface Finish: Plain and
Electro-zinc plated
Attaches hangers to structural
attachments without threading the
rod, UNC Thread Form
NOTE: Low carbon: tensile: 58,000 psi; yield: 36,000 psi,
available in Stainless Steel for 3/8 and 1/2 rod size
Part
Number

RS

Plain Finish
0502506PL
1/4
0502510PL
1/4
0502512PL
1/4
0503706PL
3/8
0503710PL
3/8
0503712PL
3/8
0505006PL
1/2
0505010PL
1/2
0505012PL
1/2
0506206PL
5/8
0506210PL
5/8
0506212PL
5/8
0507506PL
3/4
0507510PL
3/4
0507512PL
3/4
0508706PL
7/8
0508710PL
7/8
0508712PL
7/8
Electro-zinc Plated Finish
0502506EG
1/4
0502510EG
1/4
0502512EG
1/4
0503706EG
3/8
0503710EG
3/8
0503712EG
3/8
0505006EG
1/2
0505010EG
1/2
0505012EG
1/2
0506206EG
5/8
0506210EG
5/8
0506212EG
5/8
0507506EG
3/4
0507510EG
3/4
0507512EG
3/4
0508706EG
7/8
0508710EG
7/8
0508712EG
7/8

Max. Rec.
Load (lbs)*

6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12

240
240
240
610
610
610
1130
1130
1130
1810
1810
1810
2710
2710
2710
3770
3770
3770

6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12

240
240
240
610
610
610
1130
1130
1130
1810
1810
1810
2710
2710
2710
3770
3770
3770

*Load based on Max. 650 F

Ph: 1-800-333-0852
www.erico.com

229

RS

RODS, PLATES & HARDWARE

17

HARDWARE THREADED
STUD 51
Threaded Studs
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Plain
Attaches hangers to structural
attachments without threading or
cutting the rod, UNC Thread Form
NOTE: Low carbon: tensile: 58,000 psi; yield: 36,000 psi
Part
Number
0513702PL
0513703PL
0513704PL
0513705PL
0513706PL
0515004PL
0515005PL
0515006PL
0515010PL
0515012PL

RS

Max. Rec.
Load (lbs)*

3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2

2
3
4
5
6
4
5
6
10
12

610
610
610
610
610
1130
1130
1130
1130
1130

RS

*Load based on Max. 650 F

HARDWARE ROD
COUPLING 25
Steel Rod Coupling
Size Range: 1/4 thru 7/8 rod sizes
Surface Finish: Electro-zinc plated
Intermediate accessory designed to
join two lengths of similar UNC
threaded rod
Part
Number
0250025EG
0250037EG
0250050EG
0250062EG
0250075EG
0250087EG

RS

Max. Rec.
Load (lbs)

1/4
3/8
1/2
5/8
3/4
7/8

7/8
1-3/4
1-3/4
2-1/8
2-1/4
2-1/2

240
610
1130
1810
2710
3770

230

RS

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

17

HARDWARE ROD
COUPLING 25S
Short Steel Rod Coupling
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Intermediate accessory designed to
join two lengths of similar UNC
threaded rod
Part
Number
025S0037EG
025S0050EG

RS

Max. Rec.
Load (lbs)

3/8
1/2

1-1/8
1-1/4

N/A
N/A

RS

HARDWARE ROD
COUPLING 25R
Reducing Steel Rod Coupling
Size Range: 3/8, 1/2 and 5/8
rod sizes
Surface Finish: Electro-zinc plated
Intermediate accessory designed to
join dissimilar sizes of UNC rod
NOTE: Never use smaller rod sizes than the minimum
rod sizes noted in MSS-SP-69
Part
Number
025R3725EG
025R5037EG
025R6250EG

RS

RS1

3/8
1/2
5/8

1/4
3/8
1/2

1
1-1/4
1-1/4

Max.
Max. Rec.
Pipe Size Load (lbs)
3/8
2
3-1/2

240
610
1130

RS

RS1

Ph: 1-800-333-0852
www.erico.com

231

RODS, PLATES & HARDWARE

17

HARDWARE COACH
SCREW 41
Coach Screw Rod
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Plain
Light duty hanger rod for
wood structures
Part
Number
0413704PL
0413706PL
0413708PL
0413710PL
0413712PL
0415004PL
0415006PL
0415008PL
0415010PL
0415012PL

RS

L1

L2

Max.
Pipe Size

Max. Rec.
Load (lbs)

3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2

4
6
8
10
12
4
6
8
10
12

1-1/8
1-1/2
1-1/2
2
1-5/8
2
2
2-1/4
2-3/8
2-3/8

2
2-3/4
2-1/2
2-1/2
2-1/2
2
2
2-1/2
2-1/4
2-1/4

2
2
2
2
2
3
3
3
3
3

390
390
390
390
390
640
640
640
640
640

RS

L1

L2

HARDWARE LAG
SCREW 42
Lag Screw
Size Range: 1/4, 3/8 and 1/2
Surface Finish: Electro-zinc plated
Fastener for mounting various
structural attachments onto wood
Part
Number
0422515EG
0422520EG
0423710EG
0423715EG
0423720EG
0423725EG
0423730EG
0423740EG
0425015EG
0425020EG
0425025EG
0425030EG
0425040EG

BS

1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2

1-1/2
2
1
1-1/2
2
2-1/2
3
4
1-1/2
2
2-1/2
3
4

232

BS

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

17

HARDWARE DRIVE
SCREW 43
Wood Drive Screw
Size Range: #14 and #16
Surface Finish: Electro-zinc plated
Light duty fastener for mounting
various structural attachments
onto wood
NOTE: Install only in shear, never use under
pull-out configuration
Part
Number

Size

0431402EG
0431602EG

#14
#16

#14 or #16
2"
2

HARDWARE NUT 100A


Swivel Loop Insert Nut
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Insert nut used to attach loop
hanger to threaded rod
NOTE: Used with Model numbers 100, 101,
102 and 102A loop hangers
Part
Number

Size

100A0037EGP100
100A0050EGP100

3/8
1/2

HARDWARE TOGGLE
NUT 145
Spring Toggle Wing Nut
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Used with threaded rod in hollow
wall applications
Part
Number

Rod
Size

Drill Hole
Size

1450037EG
1450050EG

3/8
1/2

1
1-1/4

3
4-7/16

Ph: 1-800-333-0852
www.erico.com

233

RODS, PLATES & HARDWARE

17

HARDWARE ANCHORS HMZ


HangerMate Anchors
Used for supporting/anchoring
threaded rod in wood, steel or
concrete structural members
NOTE: For use on horizontal and vertical
surfaces

Part
Number

RS

Description

Steel Applications Vertical Mount (End-drilled Head)


HMZG471

3/8-16

3/8 rod anchor for steel and purlin

HMZG550

3/8-16

Self drilling anchor for steel 16 ga. - 1/4

Steel Applications Horizontal Mount (Cross-drilled Head)


HMZH455

3/8-16

3/8 rod anchor for sidewall (.125 max)

HMZH475

3/8-16

3/8 rod anchor for steel (.25 max)

HMZH476

3/8-16

3/8 rod anchor sidewall, steel and purlin

Wood Applications Vertical Mount (End-drilled Head)


HMZG660

3/8-16

Self drilling 3/8 rod anchor for wood

Wood Applications Horizontal Mount (Cross-drilled Head)


HMZH665

3/8-16

3/8 rod anchor for sidewall/wood

Concrete Applications Vertical Mount (End-drilled Head)


HMZG730

3/8-16

3/8 rod anchor for concrete

Concrete Applications Horizontal Mount (Cross-drilled Head)


HMZG735

3/8-16

Part
Number

5/16 x 2-1/4 HangerMate Anchor

Description

Installation Tools
HMZE215

Vertical recessed drive socket for metal and wood


vertical-mount applications

HMZE220

Concrete recessed drive socket sleeve

HMZE230

Carbide countersink tool use with HMZG730 for


concrete/masonry applications

HMZE380

SDS Hex Shank Drill Bit

234

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

17

HARDWARE ANCHORS
345R
Concrete Drop-in Anchor
Size Range: 3/8, 1/2 and 5/8
rod sizes
Surface Finish: Electro-zinc plated
Special anchor design offers fast and
easy installation and provides
maximum holding power
May be installed flush with masonry surface
NOTE: Furnished with a pre-assembled internal expander plug.
Part
Number

RS

MRI

Concrete Tension
Shear
Material
Drill Size Load (lbs) Load (lbs)

345R0037EG 3/8 1-9/16


5/8
345R0050EG 1/2
2
13/16
345R0062EG 5/8 2-1/2 1-3/16

1/2
5/8
7/8

6400
9000
15218

4220
6640
10380

Steel
Steel
Steel

RS

MRI

HARDWARE ANCHOR
RAWL
RAWL Concrete Pipe Spike
Size Range: 3/8 rod size
Use in concrete with threaded rod
Vibration-resistant

Part
Number
RAWL3758

Size

Drill
Diameter

Min.
Depth

3/8

1/4

1-1/4

Ph: 1-800-333-0852
www.erico.com

235

RODS, PLATES & HARDWARE

17

HARDWARE EXTENSION 26
Malleable Iron Extension Piece
Size Range: 3/8 thru 7/8 rod sizes
Surface Finish: Black
Intermediate accessory that may
attach to the side of a structural
member or to a beam clamp
Extension may be used in conjunction
with Model #360
Part
Number
0260037PL
0260050PL
0260062PL
0260075PL
0260087PL

RS

MRI

Max. Rec.
Load (lbs)

3/8 5/8 2-1/16


5/8
1/2
1/2 11/16 2-5/16 11/16 1/2
5/8 7/8 2-7/16
5/8
1/2
3/4
1
2-7/8
3/4
1/2
7/8 1-1/16
3
13/16 9/16

610
1130
1550
2100
2350

B
MRI

RS

HARDWARE TURNBUCKLE 30
Forged Steel Turnbuckle
Size Range: 3/8 thru 7/8 rod sizes
Surface Finish: Plain
Intermediate accessory that provides
up to 5-1/2 of vertical adjustment
for heavy loads
Conforms with Federal Specification
WW-H-171 (Type 13), Manufacturers
Standardization Society MSS-SP-58
(Type 13); install in accordance with
ANSI/MSS-SP-69
NOTE: Ends are threaded in opposite directions
Part
Number
0300037PL
0300050PL
0300062PL
0300075PL
0300087PL

RS

MRI

Max. Rec.
Load (lbs)

3/8
1/2
5/8
3/4
7/8

11/16
7/8
1-1/8
1-7/16
1-9/16

5-3/4
5-3/4
5-5/8
5-3/8
5-1/2

7-1/8
7-1/2
7-7/8
8-1/4
8-5/8

1200
2200
3500
5200
7200

B
MRI

MRI
RS

LEFT HAND
UNC THREAD

RIGHT HAND
UNC THREAD

236

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

17

HARDWARE CLEVIS 31
Forged Steel Rod Clevis
Size Range: 3/8 thru 2 rod sizes
Surface Finish: Plain
Intermediate accessory designed to
attach to vertical plates that have
been welded to structure or pipe
Conforms with Federal Specification
WW-H-171 (Type 14), Manufacturers
Standardization Society MSS-SP-58
(Type 14); install in accordance with
ANSI/MSS-SP-69
Part
Number

RS

0310037PL
0310050PL
0310062PL
0310075PL
0310087PL
0310100PL
0310125PL
0310150PL
0310175PL
0310200PL

3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2

Body
No.

MRI

2
15/16
2
15/16
2
1-1/16
2-1/2 1-3/16
2-1/2 1-3/16
3
1-7/16
3
1-1/2
3-1/2 2-1/16
4
2-9/16
5
2-11/16

Max. Rec.
Load (lbs)

3-5/8
3-5/8
3-5/8
4
4
4-15/16
4-15/16
6
6
7

1/2
5/8
3/4
7/8
1
1-1/8
1-1/2
1-3/4
2
2-1/4

3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
1-3/4
2

610
1130
1810
2710
3770
4960
8000
11630
15700
20700

HARDWARE SWIVEL SWF


Swivel Female
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Threaded rod attachment with the
capability to swivel

Part
Number
SWF0037EG
SWF0050EG

RS

3/8 1-3/4
1/2
2

B
1/2
3/4

Max. Rec.
Load (lbs)
1000
1800

RS
A

Ph: 1-800-333-0852
www.erico.com

237

RODS, PLATES & HARDWARE

17

HARDWARE EYE NUT 35


Forged Steel Eye Nut
Size Range: 3/8 thru 7/8 rod sizes
Surface Finish: Plain
Intermediate accessory for high
temperature piping used in
conjunction with Models: #320, #360,
#361, #450, #451, #452 and #453
Conforms with Federal Specification
WW-H-171 (Type 17), Manufacturers
Standardization Society MSS-SP-58
(Type 17); install in accordance with
ANSI/MSS-SP-69
Part
Number
0350037PL
0350050PL
0350062PL
0350075PL
0350087PL

RS

MRI

Max. Rec.
Load (lbs)

3/8
1/2
5/8
3/4
7/8

1-3/4
1-11/16
1-11/16
1-11/16
2-1/4

3-1/8
3-1/8
3-1/8
3-1/8
4-3/8

1
1-1/2
1-1/2
1-1/2
2

5/8
3/4
3/4
3/4
1-1/8

1250
2250
3600
5200
7200

RS

HARDWARE SWIVEL SWFF


Swivel Female-Female
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Threaded rod attachment with the
capability to swivel

Part
Number

RS

SWFF0037EG
SWFF0050EG

3/8
1/2

Max. Rec.
Load (lbs)

2-3/4
3

RS

1000
1800

RS

238

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

17

HARDWARE EYE ROD 40


Steel Eye Rod
Size Range: 3/8 rod size
Surface Finish: Plain
Structural attachment with Model #42
lag screw or as a hanger rod from
other structural attachments
Capable of being used in connection
with Models: #360, #361, etc.
Part
Number

RS

Max. Rec.
Load (lbs)

0403704PL
0403706PL
0403708PL

3/8
3/8
3/8

4
6
8

2-1/2
2-1/2
2-1/2

1/2
1/2
1/2

240
240
240

C
A

RS

HARDWARE SWIVEL SWM


Swivel Male
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Threaded rod attachment with the
capability to swivel

Part
Number

RS

Max. Rec.
Load (lbs)

SWM0037EG
SWM0050EG

3/8
1/2

1-3/4
2

1/2
3/4

1000
1800
RS

Ph: 1-800-333-0852
www.erico.com

239

RODS, PLATES & HARDWARE

17

HARDWARE EYE NUT 47


Malleable Iron Eye Nut
Size Range: 1/4 thru 7/8 rod sizes
Surface Finish: Black
Intermediate attachment for various
types of pipe supports and structural
attachments
Conforms with Federal Specification
WW-H-171 (Type 16), Manufacturers
Standardization Society MSS-SP-58
(Type 16); install in accordance with
ANSI/MSS-SP-69
Part
Number
0470025PL
0470037PL
0470050PL
0470062PL
0470075PL
0470087PL

RS

MRI

Max. Rec.
Load (lbs)

1/4
3/8
1/2
5/8
3/4
7/8

5/8
3/4
3/4
15/16
1-3/16
1-1/4

1-3/4
1-5/8
1-7/8
2-1/8
2-1/2
2-7/8

5/16
3/8
3/8
5/8
5/8
5/8

1/2
5/8
3/4
3/4
7/8
1-1/16

230
610
1130
1400
1900
2200

RS

HARDWARE SWIVEL SWMF


Swivel Male-Female
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Electro-zinc plated
Threaded rod attachment with the
capability to swivel

Part
Number

RS

Max. Rec.
Load (lbs)

SWMF0037EG
SWMF0050EG

3/8
1/2

2-3/4
3

1000
1800

1"

RS
A

RS

240

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE

17

HARDWARE HEX BOLT HSCR


Steel Hex Cap Bolts
Size Range: 3/8 and 1/2 sizes
Surface Finish: Plain and Electro-zinc
plated
Part
Number

Thread
Size

Plain Finish
HSCR3710PL
3/8 - 16
HSCR3712PL
3/8 - 16
HSCR3715PL
3/8 - 16
HSCR3720PL
3/8 - 16
Electro-zinc Plated Finish
HSCR3707EG
3/8 - 16
HSCR3710EG
3/8 - 16
HSCR3712EG
3/8 - 16
HSCR3715EG
3/8 - 16
HSCR3720EG
3/8 - 16
HSCR5007EG
1/2 - 13
HSCR5010EG
1/2 - 13
HSCR5012EG
1/2 - 13
HSCR5015EG
1/2 - 13
HSCR5020EG
1/2 - 13

1
1-1/4
1-1/2
2

3/4
1
1-1/4
1-1/2
2
3/4
1
1-1/4
1-1/2
2

3/8" or 1/2"
UNC Thread

HARDWARE J-BOLT 85
Steel J-bolt
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: Plain
Allows bolt to be hooked or hung
from beam flange or purlin

Part
Number
085370400PL
085370500PL
085370600PL
085370700PL
085370800PL
085370900PL
085371000PL
085500600PL
085500700PL
085500800PL
085500900PL
085501000PL

RS

Max. Rec.
Load (lbs)

3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2

4
5
6
7
8
9
10
6
7
8
9
10

240
240
240
240
240
240
240
440
440
440
440
440

Ph: 1-800-333-0852
www.erico.com

241

RS

RODS, PLATES & HARDWARE

17

HARDWARE TIE BOLT 80


Steel Tie Bolt
Size Range: 3/4 x 4-1/2
Surface Finish: Black
Used to secure connection of
installation of private fire service
mains
NOTE: Conforms to NFPA pamphlet
#2, 4 12 pipe size

Part
Number

Material

080750450PL

3/4 x 4-1/2

HARDWARE ROD
BUTTON 15
Threaded Rod Ceiling Buttons
Size Range: 3/8 and 1/2 rod sizes
Surface Finish: White or Chrome
Recommended for giving a finished
appearance where rod enters ceiling
Part
Number

Size

Material

0150037W
0150037PC
0150050W

3/8
3/8
1/2

White
Chrome
White

242

Ph: 1-800-333-0852
www.erico.com

RODS, PLATES & HARDWARE


HARDWARE PIPE SLEEVE
POSITIONER 740
Hammer-on Pipe Sleeve
Positioner Clips
Size Range: Less than 5/16 wall
thickness
Surface Finish: CADDY COAT
Used to position pipe sleeves and
prevent movement during concrete pours
NOTE: No load rating, for positioning only
Part
Number
740
740

Sleeve
Diameter

Wall
Thickness

All
2 6

5/16" and under


Sch. 40 pipe

HARDWARE SLEEVE
POSITIONER 4H
Hammer-on Pipe Sleeve
Positioner Clips
Size Range: 6 thru 14 Schedule
80 pipe
Surface Finish: CADDY COAT
Used to position pipe sleeves and
prevent movement during concrete pours
NOTE: No load rating, for positioning only
Part
Number
4H24
4H58

4H912

Sleeve
Diameter

Wall
Thickness

1 4
1/2 2
5 6
8 10
9 14

Schedule
Schedule
Schedule
Schedule
Schedule

Ph: 1-800-333-0852
www.erico.com

40
80
80
40
80

243

17

RODS, PLATES & HARDWARE

17

HARDWARE GROMMET
ESGP
Easy Snap/Anti Rattle Pipe
Grommet
Size Range: 1/2 thru 1 copper
tubing
Yellow plastic pipe grommet provides
360 protection of plumbing and fire
sprinkler plumbing in metal studs
NOTE: Snap one grommet into standard

1-11/32 field punched hole, or snap two


together into any shape factory punched hole;
anti-rattle tabs in ESGP allow grommet to
accommodate copper tubing from 1/2 to 1
Part
Number
ESGP

Size
1/2 1 CT

HARDWARE TOOLS MSP


Metal Stud Punch
Used in the field for punching
standard sized 1-11/32 holes in
metal studs
Cushioned handles mean less
operator fatigue and more
comfortable handling
Tool design with offset handles
allows punch to work in confined
locations and near perpendicular walls
Lightweight punch makes accurate
location of holes easier
Hardened steel components keep tool
sharp longer less replacement
Plastic grommets (ESGP) snap easily
into 1-11/32 hole
Part
Number
MSP20

244

Ph: 1-800-333-0852
www.erico.com

SLOTTED ANGLE

18

Page 246

Page 246

Page 247

SAA

SAD

SAE

Ph: 1-800-333-0852
www.erico.com

245

SLOTTED ANGLE

18

SLOTTED ANGLE
FRAMING SAA
Size Range: 1-5/8 x 1-5/8,
14 gauge
Surface Finish: Electro-zinc plated
Part
Number
SAA1400EG

L
10
3/8" DIA.
3/4"

3/4"

3/4"

9/16 "

1-1/2 "

3"

LONGITUDINAL SLOTS
11/32" x 9/16"

TRANSVERSE SLOTS
11/32" x 1/2"
LONGITUDINAL SLOTS
11/32" x 9/16"

3/8" DIA.
3"

1-1/2 "

9/16 "

FRAMING SAD
Size Range: 1-5/8 x 2-7/16,
14 gauge
Surface Finish: Electro-zinc plated
Part
Number
SAD1400EG

L
10
3/8" DIA.
3/4 "

3/4 "

3/4 "

3/4 "

1-11/16"

3"

LONGITUDINAL SLOTS
11/32" x 9/16"

3"

3/8" DIA.

TRANSVERSE SLOTS
11/32" x 1/2"
LONGITUDINAL SLOTS
11/32" x 9/16"

3/4 "
2 - 7/16 "

TRANSVERSE SLOTS
11/32" x 1/2"

246

3/4 "

Ph: 1-800-333-0852
www.erico.com

SLOTTED ANGLE

18

SLOTTED ANGLE
FRAMING SAE
Size Range: 1-5/8 x 3-1/8,
12 gauge
Surface Finish: Electro-zinc plated
Part
Number
SAE1200EG

L
10

3/8" DIA.
3/4 "

3/4 "

3/4 "

3/4 "

1-11/16 "

3"

LONGITUDINAL SLOTS
11/32" x 9/16"

3"

3/8" DIA.

TRANSVERSE SLOTS
11/32" x 1/2"
LONGITUDINAL SLOTS
11/32" x 9/16"

3/4 "

3 - 3/16 "
3/4 "

TRANSVERSE SLOTS
11/32" x 1/2"

Ph: 1-800-333-0852
www.erico.com

247

3/4 "

248

Ph: 1-800-333-0852
www.erico.com

SWAY BRACING

19

Page 250

Page 251

Page 251

TP220

TP225

TP225A

Page 252

Page 253

Page 253

TP230

TP235

TP240

Page 254

TP280

Ph: 1-800-333-0852
www.erico.com

249

SWAY BRACING

19

SWAY BRACING TP220


Quick Clamp Sway Brace Pipe
Attachment
Size Range: 1-1/4 thru 8 braced pipe
Surface Finish: Black
Used for laterally bracing pipe
against sway disturbances
NOTE: Also available in EG finish
Part
Number

A (Braced
Pipe Size)

B (Bracing
Pipe Size)

TP2201000125PL
TP2201000150PL
TP2201000200PL
TP2201000250PL
TP2201000300PL
TP2201000400PL
TP2201000500PL
TP2201000600PL
TP2201000800PL
TP2201250125PL
TP2201250150PL
TP2201250200PL
TP2201250250PL
TP2201250300PL
TP2201250400PL
TP2201250500PL
TP2201250600PL
TP2201250800PL

1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8

1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4

4-13/16
5-1/8
5-5/16
6-1/2
7-1/4
8-1/8
8-5/8
10
11-3/4
5-1/4
5-1/2
6
6-1/2
7-1/4
8-5/16
9-1/4
10-1/2
12

250

Ph: 1-800-333-0852
www.erico.com

SWAY BRACING

19

SWAY BRACING TP225


Quick End Threadless Brace Fitting
Size Range: 1 and 1-1/4 bracing pipe
Surface Finish: Black
Used to ease the installation of
transverse and/or longitudinal
sway bracing
NOTE: Also available in EG finish
Part
Number

Fig.
No.

TP225G100PL*
TP225G125PL*
TP225100PL
TP225125PL

1
1
2
2

Pipe
Size

A (Bracing
Pipe Size)

1
1-1/4
1
1-1/4

1-3/8
1-5/8
1-3/8
1-5/8

1-1/4
1-1/4
1-3/8
1-3/8

1-1/4
1-1/4
1-1/8
1-1/8

5
5
4
4

*Heavy Duty Assembly

17/32" DIA.

C
9/16" DIA.

C
B
A

A
Fig. 1

Fig. 2

SWAY BRACING TP225A


Quick Loader Adapter Plate
Surface Finish: Black
Allows TP225 to be attached with
two or three attachment bolts
NOTE: Also available in EG finish
1-1/2"
1-1/2"

Part
Number
TP225A000PL

4-3/4"

Ph: 1-800-333-0852
www.erico.com

251

SWAY BRACING

19

SWAY BRACING TP230


Quick In-line Longitudinal &
Lateral Sway Brace Clamp
Size Range: 1 thru 8 braced pipe
Surface Finish: Black or Electro-zinc
plated
Used for longitudinally bracing
piping against sway
NOTE: Also available in EG finish
Part
Number

Fig.
No.

A (Braced
Pipe Size)

B (Bracing
Pipe Size)

TP2301000100PL
TP2301000125PL
TP2301000150PL
TP2301000200PL
TP2301000250PL
TP2301000300PL
TP2301000400PL
TP2301000500PL
TP2301000600PL
TP2301000800PL
TP2301250125PL
TP2301250150PL
TP2301250200PL
TP2301250250PL
TP2301250300PL
TP2301250400PL
TP2301250500PL
TP2301250600PL
TP2301250800PL
TP230G1000400PL*
TP230G1000600PL*
TP230G1000800PL*
TP230G1250400PL*
TP230G1250600PL*
TP230G1250800PL*

1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
2
2
2

1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
4
6
8
4
6
8

1
1
1
1
1
1
1
1
1
1
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1
1
1
1-1/4
1-1/4
1-1/4

3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
3/16
3/16
1/4
3/16
3/16
1/4

1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
2
2
2
1
2
2
1
2
2

*Heavy Duty Assembly

Fig. 2

Fig. 1

252

Ph: 1-800-333-0852
www.erico.com

SWAY BRACING

19

SWAY BRACING TP235


Quick Tab Longitudinal Sway
Brace Fitting
Size Range: 1 and 1-1/4 bracing pipe
Surface Finish: Black
Used for longitudinally bracing piping
against sway when welding is an
option
Part
Number

A (Bracing
Pipe Size)

TP235100PL
TP235125PL

1
1-1/4

3/16
3/16

1
1

A
C

SWAY BRACING TP240


Quick 4-way Longitudinal Sway
Brace Clamp
Size Range: 1 and 1-1/4 bracing pipe
Surface Finish: Black, Electro-zinc plated
Used for longitudinally bracing lateral
sway bracing against sway disturbance
Also used for riser bracing
Part
Number

A (Bracing
Pipe Size)
A x A1
Electro-zinc Plated Finish
TP240100100EG
1 x 1
TP240100125EG 1 x 1-1/4
Plain Finish
TP240100100PL
1 x 1
TP240100125PL
1 x 1-1/4

B1

1-3/8
1-3/8

1-3/8
1-5/8

1-3/8
1-3/8

1-3/8
1-5/8

B1

A1

Ph: 1-800-333-0852
www.erico.com

253

SWAY BRACING

19

SWAY BRACING TP280


Threaded Sway Brace Fitting
Size Range: 1 pipe
Surface Finish: Black or Electro-zinc
plated
Used with Models: #400, #450,
#610, and any length of 1 pipe to
restrain pipe from swaying during
an earthquake
NOTE: Electro-zinc plated available
by special order
Part
Number

Pipe Size

Style

1
1

AB
A

Plain Finish
TP2800100PL
TP280P0100PL

Style AB

Style A

UL LISTED LOAD CHART FOR ERICO SWAY BRACES

Pipe
Size
2
2-1/2
3
3-1/2
4
5
6
8

Test Load
Per
U.L. 203A
380
395
435
540
655
935
1265
2015

Model
TP220

Model
TP225

LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
NOT LISTED NOT LISTED
NOT LISTED NOT LISTED

Model
TP225G

Model
TP230

LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED

LISTED
LISTED
LISTED
LISTED
NOT LISTED
NOT LISTED
NOT LISTED
NOT LISTED

Model
TP230G

Model
TP235

Model
TP240

NOT LISTED
LISTED
LISTED
NOT LISTED
LISTED
LISTED
NOT LISTED
LISTED
LISTED
NOT LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
LISTED
NOT LISTED NOT LISTED
LISTED
NOT LISTED NOT LISTED

NOTES:
1. ERICO Sway Braces are UL tested and Listed for use with ASTM schedule 10
through 40 brace pipe
2. ERICO Sway Braces meet the full UL rated load when used with 1 or 1-1/4 schedule
40 brace pipe
3. ERICO Sway Braces meet the UL requirement that lateral braces must support a load
equal to 1-1/2 times the rated load without slippage

254

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION
DIMENSIONAL LEGEND
A
CL
HS
L
OD
R
T

Adjustment
Center Line
Hole Size
Length
Outside Diameter
Radius
Thickness

FINISHES
BS
H
ID
MRI
PS
RS
W

Bolt Size
Height
Inside Diameter
Minimum Rod
Insertion
Pipe Size
Rod Size
Width

Standard Finish on all products is plain without


coating unless noted. Alternative finishes may
be available upon request.

CADDY COAT:
Electrostatic coating.

COPPER:
CP Copper electroplate (no corrosion
protection; for identification
purposes only).
(Alternative finish is CADDY COAT.)

MATERIAL USED
CAST IRON:

EPOXY: EP

Grey Cast Iron, ANSI/ASTM A 48-76,


Class #20

LAMINATE:
FL Felt Lined

MALLEABLE IRON:
ANSI/ASTM A 47-77, Grade Number 32510

PAINTED:
RO Red Oxide Primer
PT Painted (Color may vary)

SPRING STEEL:
High Carbon Steel, tempered.

PLAIN:

STAINLESS STEEL:
(S4) ANSI Type 304 Stainless Steel: (S6) ANSI
Type 316, ASTM A240

PL Plain without coating

POLYMER: (normally applied by fluidized bed


process, 5 mil minimum thickness)
PVC (VC) Polyvinyl Chloride

STEEL:
M1020 Merchant Bar Quality,
ANSI/ASTM A 36
Prime Quality, Low Carbon, Hot Rolled
Sheet, (may be Pickled and Oiled)
ANSI/ASTM A 569
Commercial Quality, Low Carbon,
Cold Rolled, ANSI/ASTM A 366

ZINC:

INSTALLATION
1.

All pipe supports, hangers, intermediate


components and structural attachments
must ONLY be used to support pipe, tubing
or conduit as stated herein and are NEVER
to be used for any other purpose.

2.

All pipe supports and hangers are designed


ONLY for STATIONARY piping unless
otherwise noted.

3.

All supports, hangers, clamps and


accessories shown to use two nuts on
the hanger rod or a jam nut must have
nuts tightened securely to assure proper
performance.

EG Zinc electroplate (ANSI/ASTM B 633)


PRE-GAL (PG) Continuous mill annealed
and galvanized. Cut edges and welded
areas are not zinc coated. Zinc near the
uncoated metal becomes a sacrificial
anode which protects the bare areas after
exposure (ANSI/ASTM A 525 and 526).
HDG (HD) Hot Dipped Galvanization after
fabrication; submerged in a bath of molten
zinc; forms a metallurgical bond covering
all surfaces (ANSI/ASTM A 123).
ZP Zinc and Phosphate coatings combined
to provide a corrosion resistant barrier to
resist rusting in accordance with ASTM
B117-61 Federal Test Number QQM-151.

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

Ph: 1-800-333-0852
www.erico.com

20

255

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


This specification has been compiled from generally accepted engineering principles and
standards from the American National Standards Institute (ANSI), Manufacturers
Standardization Society (MSS), Factory Mutual (FM), Underwriters Laboratories (UL) and
other pertinent documents. The specification is intended as a guide only and it is the
design engineers responsibility to use it in conjunction with the data found in this
catalog to determine the best product or products for the user's application. The Model
numbers are those of ERICO.

I. MATERIAL DESIGN AND MANUFACTURE


All pipe hanger and supports shall be manufactured to comply with the latest
edition of MSS-SP-58. Where applicable, design and manufacture of these products
must also conform to ANSI/ASME Code for Pressure Piping, B31.1; UL203 Standard
for Pipe Hanger Equipment and Fire Protection Service; Factory Mutual FM1551
Approval Standard for Pipe Hanger Components for Automatic Sprinkler Systems;
Metal Framing Manufacturers Association, MFMA-2 and Local Building Codes. Pipe
hangers and supports shall be supplied by ERICO.

II. SELECTION
A. STANDARDS
All selection and installation of pipe supports shall conform to MSS-SP-69 and
other specifications that may apply which are listed in this document.
B. LOAD CALCULATIONS
Hangers, supports, anchors and restraints must be selected to withstand all
static and dynamic loading conditions which act upon the piping system and
associated equipment. Piping supports and equipment must be considered as a
total system and appropriate balance calculations made to determine load
forces at critical stress points. Loading conditions to be considered may include
but are not limited to:
1. The total load of pipe, fittings, valves, insulation and any expected contents
of the pipe.
2. Thermal expansion and contraction.
3. Stress from cycling of equipment or process.
4. Vibration transmitted to or from equipment or terminal connection.
5. Wind, snow or ice loading on outdoor piping.
6. Loading due to seismic forces if required by code or specification.
C. STRUCTURAL LOADS
Static and dynamic forces at points of attachment must be considered to help
ensure structural integrity of buildings or equipment. Hanger and supports
must be selected so as to minimize the effect of piping system loading on the
structure.
D. MATERIALS
1. Appropriate materials and protective coatings shall be used to prevent
failure from environmental and galvanic corrosion.
2. Material that comes in contact with pipe shall be compatible with piping
material so that neither has a deteriorating effect on the other.
E. HANGER SPACING
The maximum allowable spacing for pipe hangers shall be in accordance with
Hanger Locations and Spacing Table on page 260. Where concentrated loads
of flanges, valves, fittings, etc. occur, or there are building structural loading
limitations, close spacing will be necessary and shall be based on the weight
to be supported and the maximum recommended loads for the pipe hangers.

256

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


F. PIPE ATTACHMENTSHOT SYSTEMS
1. Hot systems are classified as those piping systems that have operating
temperatures over 120F (49C).
2. Systems with operating temperatures over 450F (232C) require special designs
for any hanger or support that is in direct contact with pipe. This is important
in determining the raw materials needed as required by MSS SP-58. Maximum
operating temperatures should be specified to the support manufacturer.
3. If piping is insulated, the connection of the pipe attachments to the hanger
rod shall be outside the insulation so that movement of the line will not cause
damage to the insulation.
4. Horizontal hot piping shall allow for expansion and contraction. If pipe
movement is negligible, an ERICO Model #1031 shall be used for pipe up
thru 3". If pipe is supported from above and the movement is less than 4,
hanger components shall be selected to allow for swing using ERICO Models
#450, #452 or #453 Pipe Clamps in conjunction with a Model #35 Forged Steel
Eye Nut or Model #40W Welded Eye Rod. If the swing is greater than 4, a
traveling device should be provided for horizontal movement. If pipe is
supported from above, ERICO Models # 605, #610, #612, or #620 Roller Hangers
are to be used. For piping supported below, use ERICO #615, #617, #619 or
#621 Roller Supports. ERICO Model #640 Pipe Slide Assembly may be utilized
if low coefficients of friction are required on support piping. Models #630
thru #635 Protection Saddles should be tack welded to the pipe to protect
the insulation from damage due to pipe movement and then filled with the
specified insulating material.
5. Vertical hot piping requires a resilient support if significant movement occurs
due to expansion and contraction of the pipe. Selection of the supports
depends on the permissible load variation and effects on adjacent equipment.
If vertical movement is negligible an ERICO Model #510 shall be used for steel
pipe or a Model #511 shall be used for copper pipe. Use ERICO Variable Spring
Hangers if supporting force must be limited to 6 percent and cannot be
accommodated by a Variable Spring Hanger, Constant Support Hangers
should be specified.
G. PIPE ATTACHMENTSAMBIENT SYSTEMS
1. Ambient systems are classified as those piping systems that have operating
temperatures between 60F (16C) and 119F (48C).
2. Horizontal piping systems shall be supported by ERICO Model #100 Swivel Loop
Hanger for 1/2"-8" steel pipe and Model #400 Clevis Hanger for steel pipe 8"
and larger. Copper pipe shall be supported by Model #102A PVC Coated Swivel
Loop Hanger.
3. Vertical piping requires support at each floor by ERICO Model #510 Riser Clamp
for steel pipe and Model #511 Riser Clamp for copper pipe. Also acceptable are
U-bolts, ERICO Model #150 used with steel plates bolted securely to building
structure or equipment framing.
H. PIPE ATTACHMENTSCOLD SYSTEMS
1. Cold systems are classified as those piping systems that have operating
temperature below 60F (16C).
2. Hangers exposed to temperatures below -40F (-40C) require special design by
the design engineer.
3. Horizontal piping requiring insulation shall be provided with vapor barriers.
Under no circumstances shall supports or guides be applied directly to
horizontal pipe or tubing on vapor barriered lines. Pipe shall be supported by
ERICO Model #1031 Pre-Insulated Swivel Loop Hangers for pipe up to 3" and
Model #4031 Pre-Insulated Clevis Hangers for pipe larger than 3". Pipe not
requiring insulation shall be supported in the same manner as required for
ambient temperature piping.
4. Vertical piping requirements are the same as required for ambient piping
systems except that any penetration thru the vapor barrier will be covered by
an approved method.

Ph: 1-800-333-0852
www.erico.com

257

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


I.

PIPE ATTACHMENTS Plastic Pipe


1. Rigid plastic pipe (ABS, PVC, CPVC etc.) shall be supported by hangers with a
welded-in support shield to spread the load bearing surface, ERICO Model
#103 for sizes through 6" pipe and ERICO Model #403 on 8" pipe and larger.
2. Flexible plastic (polyethylene, etc.) shall be supported continuously by an 18
gauge sheet metal through ERICO Model #104 and #VTR.

J.

PIPE ATTACHMENTS Glass Pipe


Glass pipe shall be supported with a PVC cushioned wrought steel swivel loop
hanger, ERICO Model #102.

K.

SPECIALTY PIPING
Asbestos Cement, Reinforced Fiberglass or any other specialty piping shall be
supported per the pipe manufacturer's recommendations.

L.

INTERMEDIATE ATTACHMENTS
1. Where negligible movement of pipe occurs at hanger locations, the below
listed minimum hanger rod sizes shall be used.
Nominal Pipe
or Tubing Size

Minimum
Rod Size

1/4" - 2"
2-1/2" - 3-1/2"
4" - 5"
6"
8" - 12"
14" - 18"
20" - 24"

3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"

2.

Where significant vertical movement of the pipe occurs at the support


location, a resilient support shall be used. Selection of resilient supports shall
be based on permissible variation and effects on adjacent equipment. Use
ERICO Variable Spring Hangers or if supporting force must be limited to
percent and cannot be accommodated by a Variable Spring Hanger, a
Constant Support Spring Hanger should be specified.

3.

The contractor shall furnish all miscellaneous hardware items designed to


be utilized with various support components such as bolts, nuts, washers,
turnbuckles, etc. All threads must use lock nuts or vibration resistant nuts
where potential vibration may cause failure.

258

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


M.

STRUCTURAL ATTACHMENTS
1.

In general, piping shall be supported from walls, beams, columns and slabs
using approved structural attachments. In situations where approved
attachments cannot be used, alternative attachments or substructure
assemblies must receive approval prior to installation. Prior approval must
be given for any cutting or drilling of building structural steel. Damage to
the structure through welding, cutting or drilling will not be permitted if
it reduces the structures strength to a point below the established safety
factor for said structure. Approvals may only be granted by a qualified
structural engineer.

2.

BUILDING STEEL HORIZONTAL:


For eccentric loading applications, utilize the ERICO Model #300 Universal
Beam attachments . For concentric loading, utilize the ERICO Model # 360
or #361 Center Load Beam Clamps.

3.

BUILDING STEEL VERTICAL:


Use ERICO Models: #352 or #353 Steel Wall Brackets where horizontal
piping adjustment is necessary; where vertical piping adjustment is
necessary use strut, ERICO Models: #A12, #B12 or #C14 with strut pipe
clamps; Model #RIGD, or strut tubing clamps; Model #COPC.

4.

POURED CONCRETE CEILING, AND WALLS:


Use accurately located spot inserts, ERICO Model #355 or Continuous Inserts
Model # CONCT and place on forms before concrete is poured.

5.

Where pre-set spot inserts cannot be in place before the pour, use
expansions shields, ERICO Model #345 series, or as approved. No drilling
of precast, pre-stressed concrete will be permitted. Special types of clamps
which attach to the precast slab ribbing shall be provided as structural
attachments.

6.

Expansion loops and expansion joints shall have pipe guides, ERICO Models:
#650 and #651 on each side of the loop or joint to maintain alignment.
Each line that has this expansion potential shall be anchored to the
structure at each change of direction.

7.

Any additional structural steel required to properly support piping or


equipment shall be furnished and installed under this contract.

Ph: 1-800-333-0852
www.erico.com

259

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


N.

HANGER LOCATIONS AND SPACING


1.

Nom.
Copper Tube
Standard Weight
Pipe or
Steel Pipe
Tube
Water Service Vapor Service Water Service Vapor Service
Dia.
Ft
M*
Ft
M*
Ft
M*
Ft
M*
1/4"
7
2.1
8
2.4
5
1.5
5
1.5
3/8"
7
2.1
8
2.4
5
1.5
6
1.8
1/2"
7
2.1
8
2.4
5
1.5
6
1.8
3/4"
7
2.1
9
2.7
5
1.5
7
2.1
1"
7
2.1
9
2.7
6
1.8
8
2.4
1-1/4"
7
2.1
9
2.7
7
2.1
9
2.7
1-1/2"
9
2.7
12
3.7
8
2.4
10
3.0
2"
10
3.0
13
4.0
8
2.4
11
3.4
2-1/2"
11
3.4
14
4.3
9
2.7
13
4.0
3"
12
3.7
15
4.6
10
3.0
14
4.3
3-1/2"
13
4.0
16
4.9
11
3.4
15
4.6
4"
14
4.3
17
5.2
12
3.7
16
4.9
5"
16
4.9
19
5.8
13
4.0
18
5.5
6"
17
5.2
21
6.4
14
4.3
20
6.1
8"
19
5.8
24
7.3
16
4.9
23
7.0
10"
20
6.1
26
7.9
18
5.5
25
7.6
12"
23
7.0
30
9.1
19
5.8
28
8.5
14"
25
7.6
32
9.8
N/A N/A N/A
N/A
16"
27
8.2
35
10.7 N/A N/A N/A
N/A
18"
28
8.5
37
11.3 N/A N/A N/A
N/A
20"
30
9.1
39
11.9 N/A N/A N/A
N/A
24"
32
9.8
42
12.8 N/A N/A N/A
N/A
30"
33
10.4
44
13.4 N/A N/A N/A
N/A
*Meters

NOTE: These spacings do not apply where span calculations are made or where there are concentrated
loads between supports such as flanges, valves, specialties, etc. or changes in direction requiring
additional supports.

2. FIRE PROTECTION: follow requirements of National Fire Protection Assoc.


NFPA pamphlets 11, 12, 13, 14, 15, 16, 17.
3. CAST IRON PRESSURE: 12 feet (3.7 m) maximum spacing with a minimum of one
(1) hanger per pipe section close to the joint on the barrel. Also at all change of
directions and branch connections.
4. CAST IRON SOIL: 10 feet (3.0 m) maximum spacing with a minimum of one (1)
hanger per section close to joint on the barrel. Also at change of direction and
branch connection.
5. GLASS: 8 feet (2.4 m) maximum spacing, follow manufacturer's
recommendations.
6. PLASTIC: follow pipe manufacturer's recommendations for material and service
temperature.
7. FIBERGLASS REINFORCED: follow pipe manufacturer's recommendations for
spacing and service condition.
8. NO SUB SOIL PIPE: horizontal piping shall be hung at every other joint except
when the developed length between the hangers exceeds four (4) feet, the pipe
shall be hung at each joint. Hangers shall be provided at each horizontal branch
connection, on each water closet bend or elbow and at each trap. Where piping
and fittings are suspended on hangers more than 18 inches long and on each
water closet bend or elbow, rigid hangers or sway bracing shall be provided at
every other hanger and hung piping and closet bends shall not have any
horizontal movement in any direction. Hangers shall be placed within one inch
of the coupling at each joint requiring a hanger. Vertical piping shall be
supported at each floor level including slabs on grade with riser clamps.
9. In general, a hanger shall be used within one foot of each change of direction
and at each valve or equipment connection.

260

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


O.

P.

SPECIAL SITUATIONS
1.

Under Slab On Grade and Below Ground, if it is known at time of design that soil
conditions at the job site are suitable for the support of underground piping, or if
no information is available as to soil conditions, all piping shall be supported as
specified under maximum pipe hanger and support spacing. Each support shall be
constructed of masonry units, a minimum of two bricks wide by the diameter of
the pipe, with the bottoms of the supports bearing on firm undisturbed soil.

2.

In general, all special situations not specifically covered herein must be approved
prior to installation.

ATTACHMENTS MADE BY WELDING


All welded type support components shall be in accordance with MSS-SP-58. All
attachments welded to the pipe shall be in accordance with MSS-SP-58 and Pipe
Fabrication Institute, Standard ES-26. Welded and bolted attachments to the building
structural steel shall be in accordance with the requirements of AISC Specification for
the Design, Fabrication and Erection of Structural Steel Buildings.

Q.

THE FOLLOWING ARE NOT ACCEPTABLE OR PERMITTED


1.
2.
3.
4.
5.
6.

Wire hangers
Perforated strap
Hanging from unreinforced metal roof deck
Hanging from cellular roof deck
Wood plugs
Soft insulation at point of support on cold lines

(Sections N through Q were extracted from MSS SP-69, 1991, with permission of the
publisher, The Manufacturer's Standardization Society).
Visit www.erico.com for the most current specifications.

Ph: 1-800-333-0852
www.erico.com

261

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


CROSS REFERENCE
MSS SPECIFICATION
TO
ERICO
MSS
Type No.

ERICO
Model No.

MSS
Type No.

ERICO
Model No.

400, 401, 402, 410


404, 405, 406, 420, 427
N/A
452, 453
450, 451
418
111
105, 106
510, 511, 515, 520
1, 2, 3
100, 101, 102, 102A,
115, 130
N/A
455, 456, CADDY SUPERFIX 454
30
31
N/A
47
35
355
300, 301, 310
N/A
361
320
200, 255, 315
150, 151
367
470
363
N/A

29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58

N/A
360
351
352
353
325, 326, 327
640
720
721, 724
722, 723
630-635
125
605, 620
N/A
610, 612
615, 617
N/A
619
*
*
625
*
*
*
*
*
*
*
371
*

2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28

*Contact ERICO for corresponding part number.

262

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


CROSS REFERENCE
FEDERAL SPECIFICATION
WW-H-171 TO
ERICO
WW-H-171
No.

ERICO
Model No.

WW-H-171
No.

ERICO
Model No.

400, 400FL, 401, 405


406, 415, 420, 427
N/A
452, 453
450, 451
N/A
111
105, 106
510, 511, 515, 520
1, 2, 3
100, 100FL, 100JR, 101,
102, 102A, 115, 130
N/A
410, 410FL, 402
30
31
N/A
46
35
N/A
355
N/A
361, 364
320L
200, 255, 315, 300/300I, 310
150, 151
455, 456
470
N/A
N/A
N/A

30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59

N/A
N/A
351
352
354
325, 326, 328
720, 723
720
721, 724
722, 723
630-635
125
605, 620
N/A
610, 612
615, 617
N/A
619
N/A
*
625
*
*
367
363
*
*
371
*
*

2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29

*Contact ERICO for corresponding part number.

Ph: 1-800-333-0852
www.erico.com

263

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


STEEL PIPE DATA
(Schedule 40 & 80)
Nominal Pipe
Size (Inches)
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
14
16
18
20
24

Sched.
Number
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80

OD of Pipe
(Inches)

Wall Thickness
(Inches)

Weight
(lbs/ft)

Weight of Pipe filled


w/Water (lbs/ft)

.091
.126
.109
.147
.113
.154
.133
.179
.140
.191
.145
.200
.154
.218
.203
.276
.216
.300
.226
.318
.237
.337
.258
.375
.280
.432
.322
.500
.365
.593
.406
.687
.437
.750
.500
.843
.563
.937
.593
1.031
.687
1.218

.567
.738
.850
1.09
1.13
1.47
1.68
2.17
2.27
3.00
2.72
3.63
3.65
5.02
5.79
7.66
7.58
10.25
9.11
12.51
10.79
14.98
14.62
20.78
18.98
28.57
25.55
43.40
40.50
64.74
53.60
88.60
63.37
107.00
83.00
137.00
105.00
171.00
123.00
209.00
171.00
297.00

.647
.798
.980
1.19
1.36
1.66
1.99
2.54
2.92
3.56
3.60
4.40
5.10
6.30
7.86
9.49
10.78
13.11
13.39
16.36
16.30
19.96
23.28
28.65
31.49
39.86
47.15
63.20
74.60
95.84
102.10
132.60
121.87
158.20
159.50
206.70
202.20
259.50
243.40
318.40
345.20
455.20

.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
14.000
16.000
18.000
20.000
24.000

264

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


STANDARD COPPER TUBING DATA
TYPE K

Nom. Size
OD
ID
(Inches) (Inches) (Inches)
1/4
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12

.375
.500
.625
.750
.875
1.125
1.375
1.625
2.125
2.625
3.125
3.625
4.125
5.125
6.125
8.125
10.125
12.125

.305
.402
.527
.652
.745
.995
1.245
1.481
1.959
2.435
2.907
3.385
3.857
4.805
5.741
7.583
9.449
11.315

TYPE L

Weight
(lbs/ft)

Wt. Filled
With Water
(lbs/ft)

ID
(Inches)

.145
.269
.344
.418
.641
.839
1.040
1.360
2.060
2.930
4.000
5.120
6.510
9.670
13.900
25.900
40.300
57.800

.177
.275
.438
.563
.829
1.176
1.570
2.109
3.364
4.927
6.870
9.051
11.564
17.532
25.132
45.494
70.689
101.355

.315
.430
.545
.666
.785
1.025
1.265
1.505
1.985
2.465
2.945
3.425
3.905
4.875
5.845
7.725
9.625
11.565

Weight Wt. Filled


(lbs/ft) With Water
(lbs/ft)
.126
.198
.285
.362
.455
.655
.884
1.140
1.750
2.480
3.330
4.290
5.380
7.610
10.200
19.300
30.100
40.400

.160
.261
.385
.512
.667
1.011
1.427
1.889
3.092
4.539
6.263
8.284
10.559
15.697
21.806
39.580
61.612
85.890

AWWA CAST IRON PIPE


(Class 150)
Nominal Pipe Size
(Inches)

OD of Pipe
(Inches)

Wall Thickness
(Inches)

3
4
6
8
10
12
14
16
18
20
24
30
36
42
48

3.96
4.80
6.90
9.05
11.10
13.20
15.30
17.40
19.50
21.60
25.80
32.00
38.30
44.50
50.80

.32
.35
.38
.41
.44
.48
.51
.54
.58
.62
.73
.85
.94
1.05
1.14

Ph: 1-800-333-0852
www.erico.com

265

Weight of Pipe Weight of Pipe


(lbs/ft)
Filled w/Water
(lbs/ft)
12.19
16.25
25.63
36.56
48.44
62.82
78.75
95.00
114.69
135.94
190.31
277.19
365.90
475.30
589.60

15.92
21.97
38.43
59.66
73.94
113.82
148.05
185.30
228.69
277.44
391.31
589.19
814.90
1087.30
1392.60

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


SERVICE WEIGHT CAST IRON SOIL PIPE
(Bell & Spigot Type)
Nominal Pipe Size
(Inches)

OD of Pipe
(Inches)

Wall Thickness
(Inches)

Weight of Pipe
(lbs/ft)

Weight of Pipe
Filled w/Water
(lbs/ft)

2
3
4
5
6
8
10
12
15
Based on ASTM A74

2.25
3.25
4.25
5.25
6.25
8.38
10.5
12.5
15.62

.17
.17
.18
.18
.18
.23
.28
.28
.31

4.0
6.0
8.0
10.4
13.0
20.0
29.0
38.0
51.0

5.5
9.4
14.2
22.7
26.9
45.7
69.6
96.2
147.6

EXTRA WEIGHT CAST IRON SOIL PIPE


(Bell & Spigot Type)
Nominal Pipe Size
(Inches)
2
3
4
5
6
8
10
12
15
Based on ASTM A74

OD of Pipe
(Inches)

Wall Thickness
(Inches)

2.38
3.50
4.50
5.50
6.50
8.62
10.75
12.75
15.88

.19
.25
.25
.25
.25
.31
.37
.38
.44

Weight of Pipe Weight of Pipe


(lbs/ft)
Filled w/Water
(lbs/ft)
5.0
9.0
12.0
15.0
19.0
30.0
43.0
54.0
75.0

6.6
12.7
18.5
25.2
33.7
56.1
83.8
112.8
166.8

NO HUB CAST IRON SOIL PIPE


Nominal Pipe Size
(Inches)

OD of Pipe
(Inches)

Wall Thickness
(Inches)

Weight of Pipe
(lbs/ft)

Weight of Pipe
Filled w/Water
(lbs/ft)

1-1/2
2
3
4
5
6
8
Based on ASTM A74

1.90
2.35
3.35
4.38
5.30
6.30
8.38

.16
.16
.16
.19
.19
.19
.23

2.7
3.6
5.2
7.4
9.6
11.0
18.0

6.2
8.6
13.5
20.2
27.5
34.0
57.5

266

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


PVC PLASTIC PIPE
Nominal Pipe Size
(Inches)

Schedule
Number

1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12

OD of Pipe
(Inches)

40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80
40
80

Wall Thickness
(Inches)

Weight
(lbs/ft)

Weight of Pipe
Filled w/Water
(lbs/ft)

.068
.095
.088
.119
.091
.126
.109
.147
.113
.154
.133
.179
.140
.191
.145
.200
.154
.218
.203
.276
.216
.300
.226
.318
.237
.337
.258
.375
.280
.432
.322
.500
.366
.593
.406
.687

.043
.055
.074
.094
.100
.129
.150
.150
.199
.295
.295
.382
.400
.527
.478
.639
.643
.884
1.020
1.350
1.333
1.804
1.598
2.195
1.899
2.636
2.770
4.126
3.339
5.028
5.280
8.023
7.505
11.894
10.023
16.365

.068
.071
.119
.125
.183
.190
.282
.251
.429
.481
.669
.693
1.047
1.082
1.360
1.404
2.095
2.163
3.092
3.184
4.533
4.664
5.878
6.045
7.409
7.616
11.430
11.996
15.489
16.318
26.880
27.823
41.605
42.994
58.523
60.365

.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750

GLASS PIPE DATA


REGULAR SCHEDULE
Nominal Pipe Size
(Inches)
1-1/2
2
3
4
6
HEAVY SCHEDULE
1
1-1/2
2
3
4
6

Ph: 1-800-333-0852
www.erico.com

OD of Pipe
(Inches)

Wall Thickness
(Inches)

Weight of Pipe
(lbs/ft)

1.84
2.34
3.41
4.53
6.66

.12
.14
.17
.20
.24

.64
.94
1.60
2.60
4.70

Weight of Pipe
Filled w/Water
(lbs/ft)
.89
1.45
3.19
5.79
12.78

1.31
1.84
2.34
3.41
4.53
6.66

.16
.17
.17
.20
.26
.33

.60
.87
1.10
2.00
3.40
6.30

.95
1.63
2.46
5.06
N/A
N/A

267

TECHNICAL INFORMATION

20

PIPE HANGER & SUPPORT RECOMMENDED SPECIFICATIONS


SIZING CHARTS
FOR INSULATION SHIELDS AND HANGERS
for Model #: 103, 121, 125, 403
FOR IRON PIPE
Nominal Pipe
(Inches)
Size
OD
1/2
0.840
3/4
1.050
1
1.315
1-1/4 1.660
1-1/2 1.900
2
2.375
2-1/2 2.875
3
3.500
3-1/2 4.000
4
4.500
5
5.562
6
6.625
8
8.625
10 10.750
12 12.750

Insulation Thickness
1/2
2
2
2
2-1/2
2-1/2
3
3-1/2
4
4-1/2
5
6
7
9
11
14

3/4
2
2-1/2
2-1/2
3
3
3-1/2
4
4-1/2
5
6
7
8
10
12
14

1
2-1/2
2-1/2
3
3
3-1/2
4
4-1/2
5
6
6
7
8
10
12
14

1-1/2
3-1/2
3-1/2
4
4-1/2
4-1/2
5
6
7
7
7
8
9
11
14
16

2
2-1/2
4-1/2
6
4-1/2
6
5
6
5
6
6
7
6
7
7
8
8
9
8
9
8
9
9
10
10
12
12
14
15
16
17
18

3
7
7
7
7
8
8
9
10
10
10
11
12
15
17
19

3-1/2

9
10
10
11
11
12
14
16
18
20

11
12
12
14
16
18
20
22

4-1/2

18
20
22

FOR COPPER TUBING


Nominal Tubing
(Inches)
Size
1/2
3/4
7/8
1
1-1/4
1-1/2
2

Insulation Thickness

OD
0.625
0.875
1.000
1.125
1.375
1.625
2.125

1/2
1-1/2
2
2
2
2
2-1/2
3

2-1/2

2.625

3-1/2

3.125

4-1/2

3-1/2

3.625

4-1/2

4-1/2

4.125

5.125

6.125

268

3/4
1-1/2
2
2-1/2
2-1/2
2-1/2
3
3-1/2

1
2-1/2
2-1/2
3
3
3
3-1/2
4

1-1/2
3-1/2
3-1/2
3-1/2
3-1/2
4
4-1/2
5

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

CADDY ERISTRUT LOAD APPLICATIONS


CHANNEL FRAMING

ALUMINUM (AL)

CADDY ERISTRUT channel and continuous


inserts are cold roll-formed from high quality
carbon steel. The raw steel used conforms to
the following ASTM specifications:

Aluminum channel offers low installation costs


through ease of handling and field cutting,
while providing excellent corrosion resistance.
All aluminum channels are extruded from
aluminum alloy 6063-T6. Strut fittings are
made from aluminum alloy 5052-H32.

GAGE

FINISH

ASTM NO.

12

GR; HDG; PG A570 GR33


A446 GRA

14

GR; HDG; PG A570 GR33


A446 GRA

PLAIN (PL)
The plain finish designation means that the
channel retains the oiled surface applied to the
steel prior to the rolling process. This channel
offers no protection from corrosion.

FINISHES
GREEN POWDER COATED (GN)
CADDY ERISTRUT green polyurethane powder
coating is electrostatically applied after
fabrication. Once the channel is pre-treated
and cleaned, it is coated with the powder. It
proceeds through a baking process creating a
chemical bond, resulting in a 1.5 mil thickness
of polyurethane coating. This coating provides
excellent resistance to chipping, peeling, and
corrosion.

PRE-GALVANIZED (PG)
The zinc coating on this channel is produced
by hot dipping the steel coil or sheet at the
mill prior to fabrication. This process is also
known as mill galvanized. The steel is then
rolled and processed to produce various sizes
and configurations of channel. During the
fabrication of this product, the cut edges and
welded areas are no longer zinc coated.
However, the zinc near the uncoated metal
provides sufficient protection to any bare
areas. Pre-galvanized channel is suitable for
use in dry or mildly corrosive atmospheres.
HOT DIP GALVANIZED (HD)
The zinc coating in this finish is applied after
rolling and fabrication. The bond formed by
dipping the finished product in molten zinc,
completely covers all surfaces, including edges
and welds. This zinc coating is recommended
for prolonged outdoor exposure and will
normally protect steel for up to 20 years or
more. For best results, any field cuts should
be treated with a zinc-rich paint to ensure
the integrity of the finish.

FITTINGS
CADDY ERISTRUT fittings, unless otherwise
noted, are punch pressed from hot rolled,
pickled and oiled steel plates, strip or coil, and
conform to ASTM specifications A575, A576,
A635 and A36. The pickling of the steel
provides a smooth scale-free surface.
HARDWARE
CADDY ERISTRUTs Channel nuts are designed
to provide gripping power and ease during
installation. Channel nuts are press formed,
machined and hardened from steel that meets
the requirements of ASTM A576, ASTM A675
and ASTM A108. Standard finish is electoplated zinc (ASTM B663).
Channel nuts are rectangular with beveled end
to permit quarter turn in the channel after
insertion through the rolled opening. Toothed
grooves engage the rolled edges of the
channel and prevent movement of the nut
after tightening of the bolt and nut. All
bolts, screws and nuts meet the physical and
chemical requirements of ASTM A307, SAE
J429 and ASTM A563, as well as having
unified inch screw threads (course, UNC).
Metric threads are also available.
ELECTRO-PLATED ZINC (EG)
The Electro-plated Zinc process deposits a
coating of zinc over the steel by electrolysis
from a bath of zinc sales. EG finish is usually
recommended for indoor use in relatively dry
areas. Unless otherwise noted, the standard
finish for all CADDY ERISTRUT fittings and
accessories is EG. This finish conforms with ASTM
B633 SC1.

STAINLESS STEEL (S4 OR S6)


CADDY ERISTRUT offers channel and
accessories in AISI Type 304 of Type 316
stainless steel. Both are non magnetic.
Stainless steel reduces long term maintenance
costs, is ideal for use in extreme ambient
temperatures and is resistant to corrosion.

Ph: 1-800-333-0852
www.erico.com

269

TECHNICAL INFORMATION

20

CADDY ERISTRUT LOAD APPLICATIONS


USING CADDY ERISTRUT LOAD TABLES
The calculation for beam loading on a piece of
strut or a beam supported on both ends with
a uniformly distributed load is based on the
following equations taken from Machinerys
Handbook, 26th edition:
Stress at center (worst case) =

WL [eq. 1]
8Z

Maximum deflection at center =


3

WL
5
[eq. 2]
*
EI
384

W = Load value evenly distributed over the


strut (maximum supplied by the
manufacturer)
Z = Section modulus (calculated or supplied
by the manufacturer)
E = Modulus of elasticity of the material
(29,000,000 psi for commercial grade
steel)

AL * FS 250 lb. * 3 = 1667 lb.


=
LF * HF
0.5 * 0.9

L = Length of strut

Selecting the CADDY ERISTRUT Profile


Typically the capacity ratings for strut are listed
for an evenly distributed load as shown above.
Although this case may be rare for pipe
support applications, it does provide a baseline
from which the acceptable load for a given
piping layout can be obtained. The figures
listed in the load tables are based on a yield
stress rating for steel. CADDY ERISTRUT uses
25,000 psi as the maximum stress allowed in
the strut member.
The most commonly asked question
concerning beam design for strut is how are
the loads calculated if a point load or several
point loads are applied instead of a uniformly
distributed load. This can be derived from the
supplied information using simple conversion
numbers derived from the formulas in
Machinerys Handbook
. A sample of the
calculation used for the listed, evenly
distributed load and a single-point load is
shown in the next equation.

WL
4Z

Evenly distributed load stress =


Evenly distributed load stress =
Point load stress

Consider an applied load of 250 lb. (AL) as a


point load to the center of a 24-in. section of
strut. Assume that the strut has half slots and
the required factor of safety (FS) is 3. First,
determine the appropriate hole factor (HF) and
load factor (LF) from the Load Application
Table. Then calculate the design load.
Design load =

I = Moment of inertia of the cross section


of the strut (calculated or supplied by
the manufacturer)

Point load stress =

The comparison formula shows the stress is


doubled and the allowable load cut in half
when applying a point load instead of an
evenly distributed load. This is case 2 on the
Loading Application Tables. Other load factors
are also shown. Simply apply the load factor
for the appropriate case to the maximum
loads shown in the catalog to obtain the
maximum load for the situation. The load
used in the calculation should include a factor
of safety appropriate for the application in
which the strut is being used.

Next, in the load tables, find the strut section


which has a uniform load rating higher than
the design load for a 24 inch section. Note
that A12 allows 1692 lb. for a 24 inch section.
If no strut sections will support the design
load, a different support configuration may
need to be selected.

Deflection Calculations
The maximum allowable deflection is based
on an industry standard of the length of the
member divided by 240. For a 24-in. section
of channel, this would yield an allowable
deflection of 0.10-in. These values are listed in
the load tables. (For A12 strut, the deflection
for a simply supported beam with uniform
load of 250 lb. using equation 2 is:)
Uniform Load Deflection (ULD) =
3

5
WL
=
384 * EI
5 * 250 lb. * (24 in)3
384 * 29,000,000 lb. in.-2 * 0.188 in.4
=

0.008 in.

WL
8Z

1 = 0.50
2

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

270

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

CADDY ERISTRUT LOAD APPLICATIONS


In order to determine the deflection for other
loading cases, multiply the deflection amount for
the uniform loading case by the deflection factor
found in the Load Application Chart. An
allowance must be made for channel that is
punched with slots or holes. For a simply
supported beam with full slots and a
concentrated load in the center of the
span, where:
Deflection =

ULD * DF HF = 0.008 in. * 1.6 = 0.014 in.


.90
Allowable Deflection =

24 in.
L
= 0.10 in.
=
240
240

Factor of Safety Calculations


CADDY ERISTRUT uses 25,000 psi as the
maximum stress allowed in the strut member.
Considering a 1-5/8 X 1-5/8 piece of 12
gauge channel (CADDY ERISTRUT Model A12)
two (2) feet in length with an applied load of
250 lb. Using Equation 1 we find the values of:
Stress =

WL
8Z

=-

250 lb. * 24 in.


8 * 0.203 in.3

3695 psi.

Since our example is for a point load, the stress


will be doubled per the Load Application Chart.
Factor of safety =

LF * HF * 25,000 psi. = 0.5 * 0.9 * 25,000 = 3


3695
Actual Stress

Note that this deflection is within the


recommended range. If it is not, another
beam or another support configuration
should be selected.

ULD = Uniform Load Deflection (see calculation pg. 270)


DF = Deflection Factor (see Table pg. 271-272)
HF = Hole Factor (see Table pg. 272)
LF = Load Factor (see Table pg. 271-272)
The figures on these pages illustrate the load applications and the derived conversion factors. These
factors multiplied by the load ratings listed on pages 274-280 will give the maximum recommended
load in that application for the type of CADDY ERISTRUT being used.

Loading Application
Simple beam with a uniformly applied load and supported at each end.

Load Factor (LF) Deflection Factor (DF)

1.00

1.00

0.50

1.60

1.00

1.10

1.50

0.20

1.00

0.40

Simple beam with a concentrated load at center and supported at each end.

Simple beam with 2 equal concentrated loads at 1/4


total length from ends and supported at each end.

Beam fixed at both ends with a uniformly applied load

Beam fixed at both ends with a concentrated load at center

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

Ph: 1-800-333-0852
www.erico.com

271

TECHNICAL INFORMATION

20

CADDY ERISTRUT LOAD APPLICATIONS


Loading Application
Cantilever Beam with a uniform load.

Load Factor (LF)

Deflection Factor (DF)

0.25

9.60

0.12

25.60

1.30

0.71

1.00

0.42

0.67

0.72

L2
8*A*B

Contact
ERICO

2*L
8*A

Contact
ERICO

Cantilever beam with a concentrated load at the end


or at any point along the length.

Continuous beam over 2 equal spans with a uniform


load on one span.

Continuous beam over 2 equal spans with a uniform


load on both spans.

Continuous beam over 2 equal spans with a


concentrated load at the center of both spans.

A beam supported at both ends with 2 symmetrical


loads at the same distance from the end.

A beam supported at both ends with 2 symmetrical


loads each the same distance from each end.

Hole Type

Sample

Hole Factor (HF)

None
or
Solid

1.00

Full
Slot

0.90

Hole Type

Sample

Half
Slot

Punched

Hole Factor (HF)

0.92

0.92

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

272

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

CADDY ERISTRUT CHANNEL

Selection Chart
Model No.
A12
A14
B12
C12
C14
D12
E12
M12

Width
(Inches)
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8
1-5/8

HALF SLOT (H)


1-1/8" x 9/16" slots,
punched 2" on center

Height
(Inches)
1-5/8
1-5/8
1-3/8
13/16
13/16
2-7/16
3-1/4
1

Gauge
12
14
12
12
14
12
12
12

PUNCH (P)
SLOT (S)
KNOCKOUT (K)
9/16" holes, punched 1/2" knockout (7/8"),
3" x 7/16" slots,
punched 4" on center 1-7/8" on center
located 6" on center

1-7/8

WELDED

WELDED Configurations

Two or more lengths


spot welded together.
(A configuration shown.)

(Special configurations available upon request.)

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

Ph: 1-800-333-0852
www.erico.com

273

TECHNICAL INFORMATION

20

CADDY ERISTRUT A12 CHANNEL


ELEMENTS OF SECTION
Channel Weight
Part No. lbs/ft
A12
A12A

1.890
3.780

Area of
Section
in2
.583
1.166

I = moment of inertia

Axis x-x

Axis y-y

I (in4) Z (in3) r (in)

I (in4) Z (in3) r (in)

.188
.920

.257
.514

.203
.566

.581
.910

Z = section modulus

.316 .680
.634 .680

r = radius of gyration

BEAM AND COLUMN LOADS DATA


Channel
Part No.

A12
UL Listed

A12A

BEAM SPAN
or Unbraced
Column Height
(inches)

UNIFORM LOAD
at Stress of
25,000 psi (lbs.)

DEFLECTION UNIFORM LOAD (lbs.)


Maximum
at Stress of
when Maximum
Allowable Load
of Column (lbs.)
25,000 psi (lbs.)
Deflection = span

18
24
30
36
42
48
54
60
72
84
96
108
120

2256
1692
1353
1128
967
846
752
677
564
483
423
376
338

.031
.056
.087
.126
.171
.223
.283
.349
.503
.684
.894
1.131
1.396

2256
1692
1353
1128
967
757
598
485
337
247
189
150
121

9481
8582
7601
6595
5595
4718
4090
3616
2936
2461
2101
1816
1583 **

18
24
30
36
42
48
54
60
72
84
96
108
120

6289
4717
3773
3144
2695
2358
2096
1887
1572
1348
1179
1048
943

.018
.032
.050
.072
.097
.127
.161
.199
.286
.390
.509
.644
.796

6289
4717
3773
3144
2695
2358
2096
1887
1572
1210
926
732
593

21239
20819
20279
19619
18840
17940
16920
15781
13141
10076
7715
6096
4937

240

BEAM LOADS Loads listed are uniformly distributed.


When deflection is not a factor, use stress of 25,000 psi
When deflection is a factor, use deflection of span

** KL exceeds 200
r

240

COLUMN LOADS Loads listed are for unbraced height, K = 1.0


Modules of elasticity = 29,000,000 psi.
NOTE: Must specify length, finish, and hole configuration when ordering

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

274

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

CADDY ERISTRUT A14 CHANNEL


ELEMENTS OF SECTION
Channel Weight Area of
Axis x-x
Part No. lbs/ft Section
I (in4) Z (in3) r (in)
in2
A14
A14A

1.350
2.700

.398
.796

I = moment of inertia

.142
.685

.155
.421

Axis y-y
I (in4) Z (in3) r (in)

.597
.927

Z = section modulus

.177
.354

.215
.430

.655
.655

r= radius of gyration

BEAM AND COLUMN LOADS DATA


Channel
Part No.

A14
UL Listed

A14A

BEAM SPAN
UNIFORM LOAD
DEFLECTION UNIFORM LOAD (lbs.)
Maximum
or Unbraced
at Stress of
at Stress of
when Maximum
Allowable Load
span of Column (lbs.)
Column Height 25,000 psi (lbs.) 25,000 psi (lbs.) Deflection = span
240
(inches)
18
24
30
36
42
48
54
60
72
84
96
108
120

1722
1292
1033
861
738
646
574
517
431
369
323
287
258

.032
.056
.088
.127
.173
.226
.286
.353
.506
.692
.903
1.143
1.411

1722
1292
1033
861
738
572
452
366
254
187
143
113
92

6058
5483
4958
4302
3571
3008
2488
2200
1740
1444
1236
1078
953 **

18
24
30
36
42
48
54
60
72
84
96
108
120

4678
3508
2807
2339
2005
1754
1559
1403
1169
1002
877
780
702

.018
.032
.050
.072
.097
.127
.161
.199
.286
.389
.509
.644
.796

4678
3508
2807
2339
2005
1754
1559
1403
1169
901
690
545
441

13085
12828
12667
12256
12031
11456
11179
10427
9169
7683
6024
4760
3856

BEAM LOADS Loads listed are uniformly distributed.


When deflection is not a factor, use stress of 25,000 psi.
When deflection is a factor, use deflection of span
240

COLUMN LOADS Loads listed are for unbraced height, K = 1.0


Modules of elasticity = 29,000,000 psi.
NOTE: Must specify length, finish, and hole configuration when ordering

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

Ph: 1-800-333-0852
www.erico.com

275

** KL exceeds 200
r

TECHNICAL INFORMATION

20

CADDY ERISTRUT B12 CHANNEL


ELEMENTS OF SECTION
Channel Weight Area of
Axis x-x
Axis y-y
Part No. lbs/ft Section
in2
I (in4) Z (in3) r (in) I (in4) Z (in3) r (in)
B12
B12A

1.704 .500 .134 .168 .517 .219 .269 .662


3.408 1.000 .602 .438 .775 .438 .538 .662

I = moment of inertia

Z = section modulus

r = radius of gyration

BEAM AND COLUMN LOADS DATA


Channel
Part No.

BEAM SPAN UNIFORM LOAD


DEFLECTION UNIFORM LOAD (lbs.)
Maximum
or Unbraced
at Stress of
at Stress of
when Maximum
Allowable Load
span of Column (lbs.)
Column Height 25,000 psi (lbs.) 25,000 psi (lbs.) Deflection = span
240
(inches)

B12
UL Listed

B12A

18
24
30
36
42
48
54
60
72
84
96
108
120

1867
1400
1120
933
800
700
622
560
467
400
350
311
280

.036
.065
.101
.146
.199
.259
.328
.405
.584
.794
1.038
1.313
1.621

1867
1400
1120
933
705
540
426
345
240
176
135
107
86

9266
8387
7514
6520
5672
4778
4177
3693
2994
2489
1993
1574 **
1275 **

18
24
30
36
42
48
54
60
72
84
96
108
120

4867
3650
2920
2433
2086
1825
1622
1460
1217
1043
913
811
730

.021
.038
.059
.085
.115
.151
.191
.235
.339
.461
.602
.762
.941

4867
3650
2920
2433
2086
1825
1622
1460
1078
792
606
479
388

20831
20421
19724
19083
18073
17210
15869
14801
11858
8798
6736
5322
4311

BEAM LOADS Loads listed are uniformly distributed.


When deflection is not a factor, use stress of 25,000 psi.
When deflection is a factor, use deflection of span

** KL exceeds 200
r

240

COLUMN LOADS Loads listed are for unbraced height, K = 1.0


Modules of elasticity = 29,000,000 psi.
NOTE: Must specify length, finish, and hole configuration when ordering

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

276

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

CADDY ERISTRUT C12 CHANNEL


ELEMENTS OF SECTION
Channel Weight Area of
Axis x-x
Axis y-y
Part No. lbs/ft Section
in2
I (in4) Z (in3) r (in) I (in4) Z (in3) R (in)
C12
C12A

1.350
2.700

.389
.766

I = moment of inertia

.030
.142

.061
.175

.278 .145
.431 .290

Z = section modulus

.179
.357

.616
.616

r = radius of gyration

BEAM AND COLUMN LOADS DATA


Channel
Part No.

C12

C12A

BEAM SPAN UNIFORM LOAD DEFLECTION UNIFORM LOAD (lbs.)


Maximum
or Unbraced
at Stress of
at Stress of
when Maximum Allowable Load
span of Column (lbs.)
Column Height 25,000 psi (lbs.) 25,000 psi (lbs.) Deflection = span
240
(inches)
18
24
30
36
42
48
54
60
72
84
96
108
120

678
508
407
339
290
254
226
203
169
145
127
113
102

.059
.105
.164
.237
.322
.421
.532
.657
.947
1.288
1.683
2.130
2.629

678
483
309
215
158
121
95
77
54
39
30
24
19

7204
6521
4167
3616
2415
2034
1473
1302 **
904 **
664 **

18
24
30
36
42
48
54
60
72
84
96
108
120

1944
1458
1167
972
833
729
648
583
486
417
365
324
292

.036
.064
.100
.143
.195
.255
.323
.398
.574
.781
1.020
1.291
1.594

1944
1458
1167
972
747
572
452
366
254
187
143
113
92

16741
16412
13825
13376
10169
9683
6699
6248
4339
3188
2441 **
1928 **
1562 **

BEAM LOADS Loads listed are uniformly distributed.


When deflection is not a factor, use stress of 25,000 psi.
When deflection is a factor, use deflection of span
240

COLUMN LOADS Loads listed are for unbraced height, K = 1.0


Modules of elasticity = 29,000,000 psi.
NOTE: Must specify length, finish, and hole configuration when ordering

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

Ph: 1-800-333-0852
www.erico.com

277

** KL exceeds 200
r

TECHNICAL INFORMATION

20

CADDY ERISTRUT C14 CHANNEL


ELEMENTS OF SECTION
Channel Weight Area of
Axis x-x
Axis y-y
Part No. lbs/ft Section
2
4
3
4
I (in ) Z (in ) r (in) I (in ) Z (in3) r (in)
in
C14
C14A

1.000
2.000

.275
.550

I = moment of inertia

.028
.121

.060
.149

.319 .116
.469 .232

Z = section modulus

.142 .649
.284 .649

r = radius of gyration

BEAM AND COLUMN LOADS DATA


Channel
Part No.

C14

C14A

BEAM SPAN UNIFORM LOAD DEFLECTION UNIFORM LOAD (lbs.)


Maximum
or Unbraced
at Stress of
at Stress of
when Maximum
Allowable Load
span of Column (lbs.)
Column Height 25,000 psi (lbs.) 25,000 psi (lbs.) Deflection = span
(inches)
240
18
24
30
36
42
48
54
60
72
84
96
108
120

667
500
400
333
286
250
222
200
167
143
125
111
100

.062
.111
.173
.249
.339
.443
.561
.693
.998
1.358
1.773
2.244
2.771

667
451
289
200
147
113
59
72
50
37
28
22
18

5488
4968
3545
3076
2053
1730
1252
1107 **
769 **
565 **

18
24
30
36
42
48
54
60
72
84
96
108
120

1656
1242
993
828
710
621
552
497
414
355
310
276
248

.036
.064
.100
.143
.195
.255
.322
.398
.573
.780
1.019
1.290
1.592

1656
1242
993
828
637
487
385
312
217
159
122
96
78

11897
11663
10362
10026
8122
7734
5504
5134
3566
2620
2006 **
1585 **
1284 **

BEAM LOADS Loads listed are uniformly distributed.


When deflection is not a factor, use stress of 25,000 psi.
When deflection is a factor, use deflection of span

** KL exceeds 200
r

240

COLUMN LOADS Loads listed are for unbraced height, K = 1.0


Modules of elasticity = 29,000,000 psi.
NOTE: Must specify length, finish, and hole configuration when ordering

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

278

Ph: 1-800-333-0852
www.erico.com

TECHNICAL INFORMATION

20

CADDY ERISTRUT D12 CHANNEL


ELEMENTS OF SECTION
Channel Weight Area of
Axis x-x
Axis y-y
Part No. lbs/ft Section
in2
I (in4) Z (in3) r (in) I (in4) Z (in3) r (in)
D12
D12A

2.470 .725 .520 .395 .847 .337 .415


4.940 1.450 2.865 1.175 1.405 .674 .830

I = moment of inertia

Z = section modulus

.682
.682

r = radius of gyration

1-5/8
2-7/16

2-7/16
Y

BEAM AND COLUMN LOADS DATA


Channel
Part No.

D12

D12A

BEAM SPAN UNIFORM LOAD DEFLECTION UNIFORM LOAD (lbs.)


Maximum
or Unbraced
at Stress of
at Stress of
when Maximum
Allowable Load
span of Column (lbs.)
Column Height 25,000 psi (lbs.) 25,000 psi (lbs.) Deflection = span
240
(inches)
18
24
30
36
42
48
54
60
72
84
96
108
120

4389
3292
2633
2194
1881
1646
1463
1317
1097
940
823
731
658

.022
.039
.061
.088
.120
.157
.199
.246
.354
.481
.629
.796
.982

4389
3292
2633
2194
1881
1646
1463
1317
931
684
524
414
335

9533
8629
7821
6786
5680
4785
3984
3523
2806
2345
2019
1773
1577

18
24
30
36
42
48
54
60
72
84
96
108
120

13056
9792
7833
6528
5595
4896
4352
3917
3264
2798
2448
2176
1958

.012
.021
.033
.048
.065
.085
.107
.133
.191
.260
.339
.430
.530

13056
9792
7833
6528
5595
4896
4352
3917
3264
2798
2448
2176
1846

20500
20293
19801
19509
18860
18412
17607
17002
15278
13240
10889
8610
6974

BEAM LOADS Loads listed are uniformly distributed.


When deflection is not a factor, use stress of 25,000 psi.
When deflection is a factor, use deflection of span
240

COLUMN LOADS Loads listed are for unbraced height, K = 1.0


NOTE: Must specify length, finish, and hole configuration when ordering

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

Ph: 1-800-333-0852
www.erico.com

279

TECHNICAL INFORMATION

20

CADDY ERISTRUT E12 CHANNEL


ELEMENTS OF SECTION
Channel Weight
Part No. lbs/ft
E12
E12A

3.060
6.120

Area of
Section
in2
.898
1.796

I = moment of inertia

Axis x-x
I (in4) Z (in3)

Axis y-y
r (in)

I (in4)

Z (in3)

r (in)

1.111 .640 1.112


6.344 1.920 1.879

.438
.876

.539
1.078

.698
.698

Z = section modulus

r = radius of gyration

1-5/8
3-1/4

3-1/4
Y

BEAM AND COLUMN LOADS DATA


Channel
Part No.

E12

E12A

BEAM SPAN
UNIFORM LOAD
or Unbraced
at Stress of
Column Height 25,000 psi (lbs.)
(inches)

DEFLECTION UNIFORM LOAD (lbs.)


Maximum
at Stress of
when Maximum
Allowable Load
span of Column (lbs.)
25,000 psi (lbs.) Deflection = span
240

18
24
30
36
42
48
54
60
72
84
96
108
120

7111
5333
4267
3556
3048
2667
2370
2133
1778
1524
1333
1185
1067

.017
.030
.047
.067
.091
.119
.151
.186
.268
.365
.477
.603
.745

7111
5333
4267
3556
3048
2667
2370
2133
1778
1461
1119
884
716

8598
7783
7495
6503
5921
4988
4066
3595
2790
2291
1953
1708
1522

18
24
30
36
42
48
54
60
72
84
96
108
120

21333
16000
12800
10667
9143
8000
7111
6400
5333
4571
4000
3556
3200

.009
.016
.024
.035
.048
.063
.079
.098
.141
.192
.250
.317
.391

21333
16000
12800
10667
9143
8000
7111
6400
5333
4571
4000
3556
3200

17925
17572
17331
17127
16715
16503
16102
15701
14721
13563
12226
10712
9019

BEAM LOADS Loads listed are uniformly distributed.


When deflection is not a factor, use stress of 25,000 psi.
When deflection is a factor, use deflection of span
240

COLUMN LOADS Loads listed are for unbraced height, K = 1.0


NOTE: Must specify length, finish, and hole configuration when ordering

All dimensions are in inches unless otherwise noted.


See page 269 for finish and material descriptions.
All material is Electro-Galvanized Steel unless otherwise noted.

280

Ph: 1-800-333-0852
www.erico.com

INDEX
Part No.
005275150PL
005325275PL
005550150PL
0070050EG
0070075EG
0070100EG
0070125EG
0070150EG
0070200EG
0080025CP
0080025EG
0080037CP
0080037EG
0080050CP
0080050EG
0080075CP
0080075EG
0080100CP
0080100EG
0080125CP
0080125EG
0080150CP
0080150EG
0080200CP
0080200EG
0080250EG
0080300EG
0080400EG
008CU0025PL
008CU0037PL
008CU0050PL
008CU0075PL
008CU0100PL
008CU0125PL
008CU0150PL
008CU0200PL
0097524CP
0097524CU
0097524EG
0100025EG
0100025PL
0100037EG
0100037PL
0100050EG
0100050PL
0100062EG
0100062PL
0100075EG
0100075PL
0100087EG
0100087PL
010H0025EG
010H0025PL
010H0037EG
010H0037PL
010H0050EG
010H0050PL
010H0062EG
010H0062PL
010H0075EG
010H0075PL
010H0087EG
010H0087PL
0110025EG
0110025PL
0110037EG
0110037PL

Page
226
226
226
45
45
45
45
45
45
48
46
48
46
48
46
48
46
48
46
48
46
48
46
48
46
46
46
46
49
49
49
49
49
49
49
49
74
75
74
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
227
228
228
228
228

Ph: 1-800-333-0852
www.erico.com

Part No.

Page

0110050EG
0110050PL
0110062EG
0110062PL
0110075EG
0110075PL
0110087EG
0110087PL
0120025EG
0120037EG
0120050EG
0150037PC
0150037W
0150050W
0250025EG
0250037EG
0250050EG
0250062EG
0250075EG
0250087EG
025R3725EG
025R5037EG
025R6250EG
025S0037EG
025S0050EG
0260037PL
0260050PL
0260062PL
0260075PL
0260087PL
0300037PL
0300050PL
0300062PL
0300075PL
0300087PL
0310037PL
0310050PL
0310062PL
0310075PL
0310087PL
0310100PL
0310125PL
0310150PL
0310175PL
0310200PL
034SL0600EG
034SL0800EG
034SL1000EG
034SL1200EG
034SL1400EG
0350037PL
0350050PL
0350062PL
0350075PL
0350087PL
035RS0600EG
035RS0800EG
035RS1000EG
035RS1200EG
035RS1400EG
035RS1600EG
035RS1800EG
035RS2000EG
0370037EG
0370050EG
0380037EG
0403704PL

281

228
228
228
228
228
228
228
228
228
228
228
242
242
242
230
230
230
230
230
230
231
231
231
231
231
236
236
236
236
236
236
236
236
236
236
237
237
237
237
237
237
237
237
237
237
114
114
114
114
114
238
238
238
238
238
114
114
114
114
114
114
114
114
125
125
126
239

Part No.
0403706PL
0403708PL
0413704PL
0413706PL
0413708PL
0413710PL
0413712PL
0415004PL
0415006PL
0415008PL
0415010PL
0415012PL
0422515EG
0422520EG
0423710EG
0423715EG
0423720EG
0423725EG
0423730EG
0423740EG
0425015EG
0425020EG
0425025EG
0425030EG
0425040EG
0431402EG
0431602EG
0470025PL
0470037PL
0470050PL
0470062PL
0470075PL
0470087PL
0502506EG
0502506PL
0502510EG
0502510PL
0502512EG
0502512PL
0503706EG
0503706PL
0503710EG
0503710PL
0503712EG
0503712PL
0505006EG
0505006PL
0505010EG
0505010PL
0505012EG
0505012PL
0506206EG
0506206PL
0506210EG
0506210PL
0506212EG
0506212PL
0507506EG
0507506PL
0507510EG
0507510PL
0507512EG
0507512PL
0508706EG
0508706PL
0508710EG
0508710PL

Page
239
239
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
232
233
233
240
240
240
240
240
240
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229
229

INDEX
Part No.
0508712EG
0508712PL
0513702PL
0513703PL
0513704PL
0513705PL
0513706PL
0515004PL
0515005PL
0515006PL
0515010PL
0515012PL
080750450PL
085370400PL
085370500PL
085370600PL
085370700PL
085370800PL
085370900PL
085371000PL
085500600PL
085500700PL
085500800PL
085500900PL
085501000PL
1000050EG
1000050FL
1000075EG
1000075FL
1000100EG
1000100FL
1000125EG
1000125FL
1000150EG
1000150FL
1000200EG
1000200FL
1000250EG
1000250FL
1000300EG
1000300FL
1000350EG
1000350FL
1000400EG
1000400FL
1000500EG
1000600EG
1000800EG
100A0037EGP100
100A0050EGP100
1010050CP
1010075CP
1010100CP
1010125CP
1010150CP
1010200CP
1010250CP
1010300CP
1010350CP
1010400CP
1010500CP
1010600CP

Page
229
229
230
230
230
230
230
230
230
230
230
230
242
241
241
241
241
241
241
241
241
241
241
241
241
20
23
20
23
20
23
20
23
20
23
20
23
20
23
20
23
20
23
20
23
20
20
20
233
233
22
22
22
22
22
22
22
22
22
22
22
22

Part No.
1020050VC
1020075VC
1020100VC
1020125VC
1020150VC
1020200VC
1020250VC
1020300VC
1020350VC
1020400VC
1020500VC
1020600VC
1020800VC
102A0050VC
102A0075VC
102A0100VC
102A0125VC
102A0150VC
102A0200VC
102A0250VC
102A0300VC
102A0350VC
102A0400VC
102A0500VC
102A0600VC
1030150EG
1030200EG
1030250EG
1030300EG
1030350EG
1030400EG
1030500EG
1030600EG
1040100EG
1040100EG
1040100EG
1040100EG
1040100EG
1040100EG
1040200EG
1040200EG
1040200EG
1040200EG
1050050S4
1050075S4
1050100S4
1050125S4
1050150S4
1050200S4
1050250S4
1050300S4
1050350S4
1050400S4
1050500S4
1050600S4
1050800S4
1070075EG
1070100EG
1070125EG
1070150EG
1070200EG
1080075EG

282

Page
24
24
24
24
24
24
24
24
24
24
24
24
24
25
25
25
25
25
25
25
25
25
25
25
25
26
26
26
26
26
26
26
26
27
27
27
27
27
27
27
27
27
27
216
216
216
216
216
216
216
216
216
216
216
216
216
90
90
90
90
90
90

Part No.
1080100EG
1080125EG
1080150EG
1080200EG
1090075EG
1090100EG
1090125EG
1090150EG
1090200EG
1110075PL
1110100PL
1110125PL
1110150PL
1110200PL
1110250PL
1110300PL
1110350PL
1110400PL
1110500PL
1110600PL
1150250EG
1150300EG
1150350EG
1150400EG
1150500EG
1150600EG
1150800EG
1210150PL
1210200PL
1210250PL
1210300PL
1210350PL
1210400PL
1210500PL
1210600PL
1210800PL
1211000PL
1250150EG
1250200EG
1250250EG
1250300EG
1250350EG
1250400EG
1250450EG
1250500EG
1250600EG
1250700EG
1250701EG
1250800EG
1250801EG
1250900EG
1251000EG
1251100EG
1251200EG
1251400EG
1251500EG
1251600EG
1251800EG
1251900EG
1252000EG
1252200EG
1252400EG

Page
90
90
90
90
91
91
91
91
91
15
15
15
15
15
15
15
15
15
15
15
21
21
21
21
21
21
21
163
163
163
163
163
163
163
163
163
163
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162
162

Ph: 1-800-333-0852
www.erico.com

INDEX
Part No.
1252800EG
1351204EG
1351206EG
1351208EG
1351210EG
1351212EG
1352004EG
1352006EG
1352008EG
1352010EG
1352012EG
1353008EG
1353010EG
1353012EG
1354008EG
1354010EG
1354012EG
1390150EG
1390200EG
1390250EG
1390300EG
1390400EG
1450037EG
1450050EG
150M0050EG
150M0050PL
150M0050S4
150M0075EG
150M0075PL
150M0075S4
150M0100EG
150M0100PL
150M0100S4
150M0125EG
150M0125PL
150M0125S4
150M0150EG
150M0150PL
150M0150S4
150M0200EG
150M0200PL
150M0200S4
150M0250EG
150M0250PL
150M0250S4
150M0300EG
150M0300PL
150M0300S4
150M0400EG
150M0400PL
150M0400S4
150M0500EG
150M0500PL
150M0500S4
150M0600EG
150M0600PL
150M0600S4
150M0800EG
150M0800PL
150M0800S4
150M1000EG
150M1000PL
150M1000S4
150M1200EG
150M1200PL
150M1200S4
150M1400EG

Page
162
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
51
51
51
51
51
233
233
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56
56
219
56

Ph: 1-800-333-0852
www.erico.com

Part No.

Page

150M1400PL
150M1400S4
150M1600EG
150M1600PL
150M1600S4
150M1800EG
150M1800PL
150M1800S4
16M
16M24
16M58
16M912
16MCP
16MCP24
16MCP58
16MCP912
2000037EG
2000037PL
200RS375
200RS500
20M
20M24
20M58
20M912
20MCP
20MCP24
20MCP58
20MCP912
24M
24M24
24M58
24M912
24MCP
24MCP24
24MCP58
24MCP912
2550037EG
2550037PL
2550050EG
2550050PL
2550062EG
2550062PL
255C3706EG
255C3708EG
255C3710EG
255C3714EG
255C5006EG
255C5008EG
255C6210EG
255C6214EG
255L0037EG
255L0037PL
255L0050EG
255L0050PL
255L0062EG
255L0062PL
2800037EG
2800037PL
2800050EG
2800050PL
2800062EG
2800062PL
2800075EG
2800075PL
3000037EG
3000037PL
3000050EG

283

56
219
56
56
219
56
56
219
57
58
58
58
57
59
59
59
101
101
102
102
57
58
58
58
57
59
59
59
57
58
58
58
57
59
59
59
98
98
98
98
98
98
115
115
115
115
115
115
115
115
99
99
99
99
99
99
95
95
95
95
95
95
95
95
96
96
96

Part No.
3000050PL
3000062EG
3000062PL
3000075EG
3000075PL
3000087EG
3000087PL
300C3706EG
300C3708EG
300C3710EG
300C3712EG
300C3714EG
300C3716EG
300C3718EG
300C5008EG
300C5010EG
300C5012EG
300C5014EG
300C5016EG
300C6206EG
300C6208EG
300C6210EG
300C6212EG
300C6214EG
300C7506EG
300C7508EG
300C7510EG
300C7514EG
300C8706EG
300C8708EG
300C8710EG
300C8714EG
304B2
3050037S4
3050050S4
3100037EG
3100037PL
3100050EG
3100050PL
3150037EG
3150037PL
3190100PL
3190200PL
320L0037PL
320L0050PL
320L0062PL
320L0075PL
320L0087PL
320L0100PL
320L0125PL
320L0150PL
320L0175PL
320L0200PL
320L0225PL
320L0250PL
320W0037PL
320W0050PL
320W0062PL
320W0075PL
320W0087PL
320W0100PL
320W0112PL
320W0150PL
320W0175PL
320W0200PL
320W0225PL
320W0250PL

Page
96
96
96
96
96
96
96
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
113
226
218
218
97
97
97
97
110
110
131
131
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132

INDEX
Part No.
3250037EG
3250037PL
3250050EG
3250050PL
3250062EG
3250062PL
3250075EG
3250075PL
3250087EG
3250087PL
3250100EG
3250100PL
3260037EG
3260037PL
3270037EG
3270037PL
3270050EG
3270050PL
3280037EG
3280037PL
3280050PL
32M
32M24
32M58
32M912
32MCP
32MCP24
32MCP58
32MCP912
340A2503PL
340B2503PL
340C3703PL
340D3704PL
340E5004PL
345R0037EG
345R0050EG
345R0062EG
3480100PL
3480200PL
3480300PL
3500037PL
3500050PL
3510100PL
3510200PL
3510300PL
3520100PL
3520200PL
3520300PL
3530100PL
3530200PL
3530300PL
3530400PL
3530500PL
3530600PL
3550000EG
3550000PL
355N0025EG
355N0025PL
355N0037EG
355N0037PL
355N0050EG
355N0050PL

Page
127
127
127
127
127
127
127
127
127
127
127
127
128
128
129
129
129
129
130
130
130
57
58
58
58
57
59
59
59
131
131
131
131
131
235
235
235
133
133
133
134
134
134
134
134
135
135
135
136
136
136
136
136
136
122
122
123
123
123
123
123
123

Part No.
355N0062EG
355N0062PL
355N0075EG
355N0075PL
355N0087EG
355N0087PL
3560100PL
3560200PL
3560300PL
3560400PL
3560500PL
3600000PL
361024050PL
361025062PL
361026075PL
361027087PL
361028087PL
361054050PL
361055062PL
361056075PL
361057087PL
361058087PL
3630037PL
3630050PL
3630062PL
3630075PL
3650037CP
3650037EG
3650037PL
365M0037CP
365M0037EG
365M0037PL
365M0050CP
365M0050EG
365M0050PL
370A0037PL
370A0050PL
370A0062PL
370A0075PL
370A0087PL
389001
389002
389003
389004
389005
389006
389007
389008
389011
389012
389013
389014
4010050EG
4010050RO
4010075EG
4010075RO
4010100EG
4010100RO
4010125EG
4010125RO
4010150EG
4010150RO

284

Page
123
123
123
123
123
123
115
115
115
115
115
116
117
117
117
117
117
117
117
117
117
117
118
118
118
118
121
121
121
121
121
121
121
121
121
124
124
124
124
124
54
54
54
54
54
54
54
54
54
54
54
54
4
9
4
9
4
9
4
9
4
9

Part No.
4010200EG
4010200RO
4010250EG
4010250RO
4010300EG
4010300RO
4010350EG
4010350RO
4010400EG
4010400RO
4010500EG
4010500RO
4010600EG
4010600RO
4010800EG
4010800RO
4011000EG
4011000RO
4011200EG
4011200RO
4011400EG
4011400RO
4011600EG
4011600RO
4011800EG
4011800RO
4012000EG
4012000RO
4012400EG
4012400RO
4020050CP
4020075CP
4020100CP
4020125CP
4020150CP
4020200CP
4020250CP
4020300CP
4020350CP
4020400CP
4020500CP
4020600CP
4020800CP
4030150EG
4030200EG
4030250EG
4030300EG
4030350EG
4030400EG
4030450EG
4030500EG
4030600EG
4030700EG
4030800EG
4030900EG
4031000EG
4031100EG
4031200EG
4031400EG
4031500EG
4031600EG
4031700EG

Page
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
4
9
7
7
7
7
7
7
7
7
7
7
7
7
7
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10

Ph: 1-800-333-0852
www.erico.com

INDEX
Part No.
4031800EG
4031900EG
4032000EG
4032100EG
4032200EG
4050300PL
4050400PL
4050600PL
4050800PL
4051000PL
4051200PL
4051400PL
4060050S4
4060075S4
4060100S4
4060125S4
4060150S4
4060200S4
4060250S4
4060300S4
4060350S4
4060400S4
4060500S4
4060600S4
4060800S4
4061000S4
4061200S4
4061400S4
4061600S4
4061800S4
4100050EG
4100075EG
4100100EG
4100125EG
4100150EG
4100200EG
4100250EG
4100300EG
4100350EG
4100400EG
4100500EG
4100600EG
4100800EG
4180050EG
4180050FL
4180075EG
4180075FL
4180100EG
4180100FL
4180125EG
4180125FL
4180150EG
4180150FL
4180200EG
4180200FL
4180250EG
4180250FL
4180300EG
4180300FL
4180350EG
4180350FL
4180400EG
4180400FL
4180500EG
4180600EG
4180800EG
4200050EP

Page
10
10
10
10
10
11
11
11
11
11
11
11
217
217
217
217
217
217
217
217
217
217
217
217
217
217
217
217
217
217
6
6
6
6
6
6
6
6
6
6
6
6
6
28
29
28
29
28
29
28
29
28
29
28
29
28
29
28
29
28
29
28
29
28
28
28
8

Ph: 1-800-333-0852
www.erico.com

Part No.

Page

4200075EP
4200100EP
4200125EP
4200150EP
4200200EP
4200250EP
4200300EP
4200400EP
4200500EP
4200600EP
4200800EP
4270200EG
4270400EG
4500050PL
4500075PL
4500100PL
4500125PL
4500150PL
4500200PL
4500250PL
4500300PL
4500350PL
4500400PL
4500500PL
4500600PL
4500800PL
4501000PL
4501200PL
4501400PL
4501600PL
4501800PL
4502000PL
4502400PL
4503000PL
4510300PL
4510400PL
4510500PL
4510600PL
4510800PL
4511000PL
4511200PL
4511400PL
4511600PL
4511800PL
4512000PL
4512400PL
4520050PL
4520075PL
4520100PL
4520125PL
4520150PL
4520200PL
4520250PL
4520300PL
4520400PL
4520500PL
4520600PL
4520800PL
4521000PL
4521200PL
4521400PL
4521600PL
4521800PL
4522000PL
4522400PL
4530600PL
4530800PL

8
8
8
8
8
8
8
8
8
8
8
5
5
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
36
37
37
37
37
37
37
37
37
37
37
37
37
37
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
38
39
39

285

Part No.
4531000PL
4531200PL
4531400PL
4531600PL
4531800PL
4532000PL
4532400PL
454001
454002
454003
454004
454005
454006
454007
454008
454009
454010
454011
454012
454013
454014
454015
454016
454017
4550037EG
4550037PL
4550050EG
4550050PL
4550075EG
4550075PL
4550100EG
4550100PL
4550125EG
4550125PL
4550150EG
4550150PL
4550200EG
4550200PL
4550250EG
4550250PL
4550300EG
4550300PL
4550400EG
4550400PL
4560037CP
4560050CP
4560075CP
4560100CP
4560125CP
4560150CP
4560200CP
4560250CP
4560300CP
4700050PL
4700075PL
4700100PL
4700125PL
4700150PL
4700200PL
4700250PL
4700300PL
4700400PL
4H24
4H58
4H912
4TI24
4TI58

Page
39
39
39
39
39
39
39
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
17
17
17
17
17
17
17
17
17
47
47
47
47
47
47
47
47
47
243
243
243
137
137

INDEX
Part No.
4TI912
5100050EG
5100050RO
5100075EG
5100075RO
5100100EG
5100100RO
5100125EG
5100125RO
5100150EG
5100150RO
5100200EG
5100200RO
5100250EG
5100250RO
5100300EG
5100300RO
5100350EG
5100350RO
5100400EG
5100400RO
5100500EG
5100500RO
5100600EG
5100600RO
5100800EG
5100800RO
5101000EG
5101000RO
5101200EG
5101200RO
5101400EG
5101600EG
5101800EG
5102000EG
5102400EG
5110050CP
5110075CP
5110100CP
5110125CP
5110150CP
5110200CP
5110250CP
5110300CP
5110400CP
5110500CP
5110600CP
5160075PL
5160125PL
5160137PL
5160150PL
5170300PL
5170400PL
5170600PL
5170800PL
5171000PL
5171200PL
5171400PL
5171600PL
5171800PL
5172000PL
5172400PL

Page

Part No.

Page

Part No.

Page

137
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
33
32
32
32
32
32
34
34
34
34
34
34
34
34
34
34
34
42
42
42
42
42
42
42
42
42
42
42
42
42
42
42

5200050EP
5200075EP
5200100EP
5200125EP
5200150EP
5200200EP
5200250EP
5200300EP
5200400EP
5200500EP
5200600EP
5200800EP
5470037PL
5480050PL
6050250PL
6050300PL
6050350PL
6050400PL
6050500PL
6050600PL
6050800PL
6051000PL
6051200PL
6051400PL
6051600PL
6051800PL
6052000PL
6052400PL
6053000PL
6100250PL
6100300PL
6100350PL
6100400PL
6100500PL
6100600PL
6100800PL
6101000PL
6101200PL
6101400PL
6101600PL
6101800PL
6102000PL
6102400PL
6150250PL
6150300PL
6150350PL
6150400PL
6150500PL
6150600PL
6150800PL
6151000PL
6151200PL
6151400PL
6151600PL
6151800PL
6152000PL
6152400PL
6170350PL
6170600PL
6171000PL
6171400PL
6172000PL

35
35
35
35
35
35
35
35
35
35
35
35
103
103
141
141
141
141
141
141
141
141
141
141
141
141
141
141
141
142
142
142
142
142
142
142
142
142
142
142
142
142
142
143
143
143
143
143
143
143
143
143
143
143
143
143
143
144
144
144
144
144

6172400PL
6173000PL
6174200PL
6190350PL
6190600PL
6191000PL
6191400PL
6192000PL
6192400PL
6193000PL
6194200PL
6200250PL
6200300PL
6200350PL
6200400PL
6200500PL
6200600PL
6200800PL
6201000PL
6201200PL
6201400PL
6201600PL
6201800PL
6202000PL
6202400PL
6203000PL
6300150PL
6300350PL
6300500PL
6300600PL
6300800PL
6310150PL
6310350PL
6310500PL
6310800PL
6311000PL
6311200PL
6311400PL
6311600PL
6311800PL
6312000PL
6312400PL
6320150PL
6320350PL
6320500PL
6320800PL
6321000PL
6321200PL
6321400PL
6321600PL
6321800PL
6322000PL
6322400PL
6330150PL
6330200PL
6330250PL
6330300PL
6330350PL
6330500PL
6330800PL
6331000PL
6331600PL

144
144
144
145
145
145
145
145
145
145
145
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
166
166
166
166
166
167
167
167
167
167
167
167
167
167
167
167
168
168
168
168
168
168
168
168
168
168
168
169
169
169
169
169
169
169
169
169

286

Ph: 1-800-333-0852
www.erico.com

INDEX
Part No.
6331800PL
6332000PL
6332400PL
6340200PL
6340250PL
6340300PL
6340350PL
6340500PL
6340800PL
6341000PL
6341200PL
6341400PL
6341600PL
6341800PL
6342000PL
6342400PL
6350400PL
6350500PL
6350800PL
6351000PL
6351200PL
6351600PL
6351800PL
6352000PL
6352400PL
6500100PT
6500200PT
6500300PT
6500400PT
6500500PT
6500600PT
6500700PT
6500800PT
6500900PT
6501000PT
6501100PT
6501200PT
6501300PT
6501400PT
6510100PT
6510200PT
6510300PT
6510400PT
6510500PT
6510600PT
6510700PT
6510800PT
6510900PT
6511000PT
6511100PT
6511200PT
6MCP24
6MCP58
6MCP912
6TI24
6TI58
6TI912
7000050PL
7000075PL
7000100PL
7000125PL
7000150PL
7000200PL
7000250PL
7000300PL
7000400PL
7000500PL

Page

Part No.

Page

169
169
169
170
170
170
170
170
170
170
170
170
170
170
170
170
171
171
171
171
171
171
171
171
171
153
153
153
153
153
153
153
153
153
153
153
153
153
153
155
155
155
155
155
155
155
155
155
155
155
155
59
59
59
137
137
137
40
40
40
40
40
40
40
40
40
40

7000600PL
7000800PL
7050050PL
7050075PL
7050100PL
7050125PL
7050150PL
7050200PL
7050250PL
7050300PL
7050350PL
7050400PL
7050500PL
7050600PL
7050800PL
7210250PL
7210300PL
7210400PL
7210500PL
7210600PL
7210800PL
7211000PL
7211200PL
7211400PL
7211600PL
7211800PL
7212000PL
7212400PL
7212600PL
7213000PL
7213200PL
7213600PL
7220400PL
7220600PL
7220800PL
7221000PL
7230250PL
7230300PL
7230350PL
7230400PL
7230500PL
7230600PL
7230800PL
7231000PL
7231200PL
7231400PL
7231600PL
7231800PL
7232000PL
7232400PL
7232600PL
7233000PL
7233200PL
7233600PL
7240250PL
7240300PL
7240350PL
7240400PL
7240500PL
7240600PL
7240800PL
7241000PL
7241200PL
7241400PL
7241600PL
7241800PL
7242000PL

40
40
41
41
41
41
41
41
41
41
41
41
41
41
41
156
156
156
156
156
156
156
156
156
156
156
156
156
156
156
156
156
157
157
157
157
158
158
158
158
158
158
158
158
158
158
158
158
158
158
158
158
158
158
159
159
159
159
159
159
159
159
159
159
159
159
159

Ph: 1-800-333-0852
www.erico.com

287

Part No.
7242400PL
7242600PL
7243000PL
7243200PL
7243600PL
740
800037050EP
800050075EP
800075100EP
800100125EP
801000200EP
801037050EP
801050075EP
801075100EP
801100125EP
801125150EP
801150000EP
801200000EP
802037050EP
802050075EP
802075100EP
812M
812M24
812M58
812M912
812MCP
812MCP24
812MCP58
812MCP912
A121000PG
A122000GN
A122000PG
A122000PL
A12A2000GN
A12A2000PG
A12AH1000PG
A12AH2000GN
A12AH2000PG
A12H1000CG
A12H1000GN
A12H1000PG
A12H1000S4
A12H2000CG
A12H2000GN
A12H2000PG
A14H1000GN
A14H1000PG
A14H2000GN
A14H2000PG
AF144TI
AF146TI
B122000GN
B122000PG
B12H1000PG
B12H2000GN
B12H2000PG
BC090900EG
BC091200EG
BC091500EG
BC100000EG
BC101500EG
BC130025EG
BC130031EG
BC130037EG
BC130050EG
BC130062EG
BC130075EG

Page
159
159
159
159
159
243
63
63
63
63
62
62
62
62
62
62
62
62
64
64
64
57
58
58
58
57
59
59
59
179
179
179
179
179
179
179
179
179
179
179
179
179
179
179
179
180
180
180
180
137
137
180
180
180
180
180
109
109
109
108
109
106
106
106
106
106
106

INDEX
Part No.
BC140025EG
BC140037EG
BC140050EG
BC140062EG
BC16A000EG
BC16C000EG
BC17A000EG
BC17D000EG
BC260025EG
BH0050CP
BH0075CP
BH0100CP
BR220600EG
BR221200EG
BR221800EG
BR222400EG
BR223000EG
BR223600EG
C121000AL
C121000PG
C122000AL
C122000GN
C12H1000CG
C12H1000GN
C12H1000PG
C12H2000GN
C12H2000PG
C141000PG
C141000S4
C142000S4
C14H1000CG
C14H1000GN
C14H1000PG
C14H1000S4
C14H2000CG
C14H2000GN
C14H2000PG
C14S2000GN
CD0B
CD0B37
CD0B37CP
CD0BCP
CD1B
CD1B37
CD1B37CP
CD1BCP
CD2.53B37CP
CD2.5BCP
CD2B
CD2B37
CD2B37CP
CD2BCP
CD3B
CD3B37
CD3B37CP
CD3BCP
CD4B
CD4B37
CD5B
CD5B37
CD5B37CP
CD5BCP

Page
107
107
107
107
192
192
192
192
100
15
15
15
193
193
193
193
193
193
181
181
181
181
181
181
181
181
181
182
182
182
182
182
182
182
182
182
182
182
60
60
61
61
60
60
61
61
61
61
60
60
60
60
60
60
61
61
60
60
60
60
61
61

Part No.
CD6B
CD7B
CD8B
CD9B
CL100000CG
CL100000EG
CL100000GN
CL100000PS
CONA122000PG
CONB122000PG
CONC122000PG
COPC0025CP
COPC0037CP
COPC0050CP
COPC0075CP
COPC0100CP
COPC0125CP
COPC0150CP
COPC0200CP
COPC0250CP
COPC0300CP
COPC0350CP
COPC0400CP
COPC0500CP
COPC0600CP
D122000PG
D12H1000GN
D12H1000PG
D12H2000GN
D12H2000PG
D12S2000GN
E122000GN
E12H1000GN
E12H1000PG
E12H2000GN
E12H2000PG
EMTC0050EG
EMTC0075EG
EMTC0100EG
EMTC0125EG
EMTC0150EG
EMTC0200EG
ENDCA120EG
ENDCA140EG
ENDCB120EG
ENDCC140EG
ENDCE120EG
EPS0050EG
EPS0075EG
EPS0100EG
EPS0125EG
EPS0150EG
EPS0200EG
ESGP
ET0050HD
ET0075HD
ET0100HD
ET0125HD
ET0150HD
ET0200HD
ET0250HD
ET0300HD

288

Page
60
60
60
60
193
193
193
193
183
183
183
82
82
82
82
82
82
82
82
82
82
82
82
82
82
182
182
182
182
182
182
183
183
183
183
183
82
82
82
82
82
82
194
194
194
194
194
64
64
64
64
64
64
244
111
111
111
111
111
111
111
111

Part No.
F090000EG
F100000EG
F110000EG
F120000EG
F120062EG
F120075EG
F130000EG
F140000EG
F150000EG
F160000EG
F170000EG
F180000EG
F200000EG
F220000EG
F230000EG
F250000EG
F360000EG
F370000EG
HMZE215
HMZE220
HMZE230
HMZE380
HMZG471
HMZG550
HMZG660
HMZG730
HMZG735
HMZH455
HMZH475
HMZH476
HMZH665
HSCR3707EG
HSCR3710EG
HSCR3710PL
HSCR3712EG
HSCR3712PL
HSCR3715EG
HSCR3715PL
HSCR3720EG
HSCR3720PL
HSCR5007EG
HSCR5010EG
HSCR5012EG
HSCR5015EG
HSCR5020EG
L100000EG
L110000EG
L120300EG
L120350EG
L120400EG
L150000EG
L160000EG
L170000EG
L180000EG
L190000EG
L200000EG
L220000EG
L23U0000EG
L24L0000EG
L24R0000EG
L25L0000EG
L25R0000EG

Page
194
195
195
195
195
195
195
195
195
195
195
195
196
196
197
197
198
198
234
234
234
234
234
234
234
234
234
234
234
234
234
241
241
241
241
241
241
241
241
241
241
241
241
241
241
199
199
200
200
200
200
201
201
201
202
202
202
203
203
203
204
204

Ph: 1-800-333-0852
www.erico.com

INDEX
Part No.
L26L0000EG
L26R0000EG
L270000EG
L441200EG
L441600EG
L441800EG
L460300EG
L460450EG
L460600EG
L470300EG
L470450EG
L470600EG
L470825EG
LHSR6
MSP20
MSR24
MSR58
MSR912
MSS24
MSS58
MSS912
NUT0008EG
NUT0010EG
NUT0025EG
NUT0031EG
NUT0037EG
NUT0050EG
NUT0062EG
NUT0075EG
NUT0087EG
NUTC0050EG
NUTC0062EG
NUTC0075EG
NUTC0087EG
OD0025EG
OD0025S4
OD0037EG
OD0037S4
OD0050EG
OD0050S4
OD0062EG
OD0062S4
OD0075EG
OD0075S4
OD0087EG
OD0087S4
OD0100EG
OD0100S4
OD0112EG
OD0112S4
OD0125EG
OD0125S4
OD0137EG
OD0137S4
OD0150EG
OD0150S4
OD0162EG
OD0162S4
OD0175EG
OD0175S4
OD0187EG
OD0187S4
OD0200EG
OD0200S4
OD0212EG
OD0212S4
OD0225EG

Page

Part No.

Page

204
204
205
205
205
205
206
206
206
206
206
206
206
21
244
75
75
75
76
76
76
186
186
186
186
186
186
186
186
186
186
186
186
186
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79

OD0225S4
OD0237EG
OD0237S4
OD0250EG
OD0250S4
OD0262EG
OD0262S4
OD0275EG
OD0275S4
OD0287EG
OD0287S4
OD0300EG
OD0300S4
OD0312EG
OD0312S4
OD0325EG
OD0325S4
OD0337EG
OD0337S4
OD0350EG
OD0350S4
OD0362EG
OD0362S4
OD0375EG
OD0375S4
OD0387EG
OD0387S4
OD0400EG
OD0400S4
OD0412EG
OD0412S4
OD0425EG
OD0425S4
OD0437EG
OD0437S4
OD0450EG
OD0450S4
OD0462EG
OD0462S4
OD0475EG
OD0475S4
OD0487EG
OD0487S4
OD0500EG
OD0500S4
OD0512EG
OD0512S4
OD0525EG
OD0525S4
OD0537EG
OD0537S4
OD0550EG
OD0550S4
OD0562EG
OD0562S4
OD0575EG
OD0575S4
OD0587EG
OD0587S4
OD0600EG
OD0600S4
OD0612EG
OD0612S4
OD0625EG
OD0625S4
OD0637EG
OD0637S4

220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220

Ph: 1-800-333-0852
www.erico.com

289

Part No.
OD0650EG
OD0650S4
OD0662EG
OD0662S4
OD0675EG
OD0675S4
OD0687EG
OD0687S4
OD0700EG
OD0700S4
OD0712EG
OD0712S4
OD0725EG
OD0725S4
OD0737EG
OD0737S4
OD0750EG
OD0750S4
OD0762EG
OD0762S4
OD0775EG
OD0775S4
OD0787EG
OD0787S4
OD0800EG
OD0800S4
OD0812EG
OD0812S4
OD0825EG
OD0825S4
OD0837EG
OD0837S4
OD0850EG
OD0850S4
OD0862EG
OD0862S4
P090000EG
P100000EG
P110000EG
P130000EG
PAR0037HD
PAR0050HD
PAR0075HD
PAR0100HD
PAR0125HD
PAR0150HD
PAR0200HD
PAR0250HD
PAR0300HD
PAR0350HD
PAR0400HD
PCC0025EG
PCC0037EG
PCC0050EG
PCC0075EG
PCC0100EG
PCC0125EG
PCC0150EG
PCC0200EG
PCC0250EG
PCC0300EG
PCC0350EG
PCC0400EG
PCC0500EG
PCC0600EG
PH4
PH6

Page
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
79
220
207
207
208
208
111
111
111
111
111
111
111
111
111
111
111
80
80
80
80
80
80
80
80
80
80
80
80
80
80
104
104

INDEX
Part No.
PH6FP
PHSW4
PHSW6
PHSW6FP
PPRPS25H4
PPRPS25H6
RA0037HD
RA0050HD
RA0075HD
RA0100HD
RA0125HD
RA0150HD
RA0200HD
RA0250HD
RA0300HD
RA0350HD
RA0400HD
RAWL3758
RIGD0037EG
RIGD0037S4
RIGD0050EG
RIGD0050S4
RIGD0075EG
RIGD0075S4
RIGD0100EG
RIGD0100S4
RIGD0125EG
RIGD0125S4
RIGD0150EG
RIGD0150S4
RIGD0200EG
RIGD0200S4
RIGD0250EG
RIGD0250S4
RIGD0300EG
RIGD0300S4
RIGD0350EG
RIGD0350S4
RIGD0400EG
RIGD0400S4
RIGD0500EG
RIGD0500S4
RIGD0600EG
RIGD0600S4
RIGD0800EG
RIGD0800S4
ROL10000EG
ROL11000EG
ROL12000EG
ROL13034EG
ROL13046EG
ROL13068EG
ROL14000EG
ROL15000EG
RPS150T1
RPS150T2
RPS300T1
RPS300T2
RPS50AHSV
RPS50H4EG
RPS50H6EG
RPS600T2

Page
104
105
105
105
70
70
112
112
112
112
112
112
112
112
112
112
112
235
78
221
78
221
78
221
78
221
78
221
78
221
78
221
78
221
78
221
78
221
78
221
78
221
78
221
78
221
209
209
147
147
147
147
150
151
72
72
72
72
71
71
71
72

Part No.
RPSCSEG
SAA1400EG
SAD1400EG
SAE1200EG
SCH12
SCH12B
SCH16
SCH16B
SCH20
SCH20B
SCH24B
SCH32B
SCH40B
SCH48B
SCH56B
SCH64B
SCH6B
SCH72B
SCH8
SCH8B
SGB16A
SGB24A
SK125I
SK165I
SK205I
SK245I
SK325I
SK405I
SK485I
SK565I
SK645I
SK85I
SL1214
SL1518
SLADCP
SLADS
SLD15L10
SLD15L10S
SLD15L2
SLD15L2S
SLD15L5
SLD15L5S
SLD2L1
SLD2L10
SLD2L1BP
SLD2L2
SLD2L2BP
SLD2L3
SLD2L3BP
SLD2L5
SLD3L1
SLD3L10
SLD3L2
SLD3L2BP
SLD3L2SS
SLD3L3
SLD3L3BP
SLD3L3SS
SLD3L5
SLEB250
SLEB375
SLEBWS

290

Page
72
246
246
247
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
84
55
55
85
85
85
85
85
85
85
85
85
85
68
68
68
68
67
67
67
67
67
67
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
66
68
68
68

Part No.
SLICK250
SLICK375
SLICK500
SLLC250
SLWC
SLWPT
SMS8
SO12A
SO16A
SO20A
SO24A
SO32A
SPRA0008EG
SPRA0010EG
SPRA0025EG
SPRA0031EG
SPRA0037EG
SPRA0050EG
SPRA0062EG
SPRA0075EG
SPRA0087EG
SPRC0008EG
SPRC0010EG
SPRC0025EG
SPRC0031EG
SPRC0037EG
SPRC0050EG
SPRC0062EG
SPRC0075EG
SPRC0087EG
SPRD0025EG
SPRD0037EG
SPRD0050EG
SPRD0062EG
SPRD0075EG
SPRM2508EG
SPRM2511EG
SPRM2515EG
SPRM3708EG
SPRM3711EG
SPRM3716EG
SPRM3718EG
SPRM3721EG
SPRM5011EG
SPRM5013EG
SQNT0025EG
SQNT0037EG
SQNT0050EG
SQNT0062EG
STCB6
STR0025EG
STR0025EG
STR0037EG
STR0037EG
STR0050EG
STR0050EG
STR0062EG
STR0062EG
STR0075EG
STR0075EG
STR0087EG
STR0087EG

Page
184
184
184
68
68
68
55
91
91
91
91
91
187
187
187
187
187
187
187
187
187
187
187
187
187
187
187
187
187
187
188
188
188
188
188
188
188
188
188
188
188
188
188
188
188
190
190
190
190
191
45
86
45
86
45
86
45
86
45
86
45
86

Ph: 1-800-333-0852
www.erico.com

INDEX
Part No.
STR0100EG
STR0100EG
STR20050EG
STR20050EG
STR20075EG
STR20075EG
STR20100EG
STR20100EG
STR20125EG
STR20125EG
STR20150EG
STR20150EG
STR20200EG
STR20200EG
STR20250EG
STR20250EG
STR20300EG
STR20300EG
STR20350EG
STR20350EG
STR20400EG
STR20400EG
STR20500EG
STR20500EG
STR20600EG
STR20600EG
STS
SWF0037EG
SWF0050EG
SWFF0037EG
SWFF0050EG
SWM0037EG
SWM0050EG
SWMF0037EG
SWMF0050EG
TCC0025CP
TCC0037CP
TCC0050CP
TCC0062CP
TCC0075CP
TCC0087CP
TCC0100CP
TCC0112CP
TCC0125CP
TCC0137CP
TCC0150CP
TCC0162CP
TCC0175CP
TCC0187CP
TCC0200CP
TCC0212CP
TCC0250CP
TCC0262CP
TCC0300CP
TCC0312CP
TCC0331CP
TCC0362CP
TCC0412CP
TCC0431CP
TCC0512CP
TCC0612CP
TP2201000125PL
TP2201000150PL
TP2201000200PL
TP2201000250PL
TP2201000300PL
TP2201000400PL

Page
45
86
47
86
47
86
47
86
47
86
47
86
47
86
47
86
47
86
47
86
47
86
47
86
47
86
185
237
237
238
238
239
239
240
240
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
81
250
250
250
250
250
250

Ph: 1-800-333-0852
www.erico.com

Part No.

Page

TP2201000500PL
TP2201000600PL
TP2201000800PL
TP2201250125PL
TP2201250150PL
TP2201250200PL
TP2201250250PL
TP2201250300PL
TP2201250400PL
TP2201250500PL
TP2201250600PL
TP2201250800PL
TP225100PL
TP225125PL
TP225A000PL
TP225G100PL
TP225G125PL
TP2301000100PL
TP2301000125PL
TP2301000150PL
TP2301000200PL
TP2301000250PL
TP2301000300PL
TP2301000400PL
TP2301000500PL
TP2301000600PL
TP2301000800PL
TP2301250125PL
TP2301250150PL
TP2301250200PL
TP2301250250PL
TP2301250300PL
TP2301250400PL
TP2301250500PL
TP2301250600PL
TP2301250800PL
TP230G1000400PL
TP230G1000600PL
TP230G1000800PL
TP230G1250400PL
TP230G1250600PL
TP230G1250800PL
TP235100PL
TP235125PL
TP240100100EG
TP240100100PL
TP240100125EG
TP240100125PL
TP2800100PL
TP280P0100PL
TPC112
TPC238
TSGB16
TSGB16112
TSGB24
TSGB24112
TSM0037
TSM0050
TSM0062
TSM0075
TSM0087
TSM0112
TSM0137
TSM0162
TSMI0037
TSMI0050
TSMI0062

291

250
250
250
250
250
250
250
250
250
250
250
250
251
251
251
251
251
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
252
253
253
253
253
253
253
254
254
53
53
55
53
55
53
83
83
83
83
83
83
83
83
83
83
83

Part No.
TSMI0075
TSMI0087
TSMI0112
TSMI0137
TSMI0162
TSNT0025EG
TSNT0037EG
TSNT0050EG
U10A0000EG
U24A0000EG
U24C0000EG
U24D0000EG
UNIV0050EG
UNIV0075EG
UNIV0100EG
UNIV0125EG
UNIV0150EG
UNIV0200EG
VAFT
VF144TI
VF146TI
VS0050EG
VS200000
VTR#11000
VTR#21000
W10L0000EG
W10R0000EG
W120000EG
W130000EG
W170000EG
W180000EG
W190000EG
W200000EG
W230000EG
WH02050CP
WH02075CP
WH04050CP
WH04050PL
WH04050VC
WH04075CP
WH04075PL
WH04075VC
WH06050CP
WH06050PL
WH06050VC
WH06075CP
WH06075PL
WH06075VC
WH06100CP
WH06100PL
WH06100VC
WH06125PL
WH06125VC
WH06150PL
WH06150VC
WH08075CP
WH08075PL
WH08075VC
WH08200PL
WH08200VC
WH10200PL

Page
83
83
83
83
83
189
189
189
210
210
210
210
87
87
87
87
87
87
68, 138
138
138
190
87
27
27
211
211
211
212
212
213
213
214
214
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52
52

ERICO Online
Visit the ERICO website at www.erico.com for new
product information, up-to-date product specifications
and applications, a list of upcoming events and industry
tradeshow participation and more.
An electronic library provides pertinent product
literature in an easy-to-download PDF format. This
is a great way to stay informed on all the current
publications. New product brochures and datasheets
are posted as soon as they are produced.
In the News & Events section, customers can find new
product updates, press releases and lists of seminars.
Locations and contact information is listed for ERICO
offices around the world.
www.erico.com provides a convenient way to get the
answers you need day or night. Visit ERICO online.

292

Ph: 1-800-333-0852
www.erico.com

www.erico.com
AUSTRALIA

GERMANY

POLAND

6 Chilvers Road
P.O. Box 148
Thornleigh (Sydney)
NSW 2120
Australia
Phone 61-2-9479-8500
Fax 61-2-9484-9188

66851 Schwanenmhle
Germany
Phone 49-6307-918-10
Fax 49-6307-918-150

ul. Krzemieniecka 17
54-613 Wroclaw
Poland
Phone 48-71-374-40-22
Fax 48-71-374-40-43

BELGIUM

HONG KONG

SINGAPORE

Postbus 33
3110 Rotselaar
Belgium
Phone 32-14-69-96-88
Fax 32-14-69-96-90

Unit 1, 2nd Floor, Block A


Po Yip Building
62-70 Texaco Road
Tsuen Wan, New Territories
Hong Kong
Phone 852-2764-8808
Fax 852-2764-4486

Jurong Industrial Estate


16 Wan Lee Road
Singapore 627 946
Phone 65-6-268-3433
Fax 65-6-268-1389

BRAZIL

HUNGARY

SPAIN

R. Dom Pedro Henrique


de Orleans
e Braganca, 276
Vila Jaguara CEP 05117-000
So Paulo, Brazil
Phone 55-11-3621-4111
Fax 55-11-3621-4066

P.f. 184
1476 Budapest
Hungary
Phone 31-13-58-34-547
Fax 31-13-58-35-499

C/Provenza 288, Pral.


08008 Barcelona
Spain
Phone 34-93- 467-7726
Fax 34-93- 467-7725

CANADA

INDONESIA

SWEDEN

P.O. Box 170


Mississauga, Ontario
Canada L5M 2B8
Phone 1-800-677-9089
Fax 1-800-677-8131

Sampoerna Strategic Square,


Tower B 19th Fl.
Jalan Jend. Sudirman Kav. 45-46
Jakarta 12930
Indonesia
Phone 62-21-575-0941
Fax 62-21-575-0942

Box 211
201 22 Malm
Sweden
Phone 46-40-611-13-60
Fax 46-40-611-94-15

CHILE

ITALY

SWITZERLAND

Alcantara 200,
piso 6 Of. 17
Las Condes, Santiago
Chile
Phone 56-2-370-2908
Fax 56-2-370-2914

A&B Business Center


Via Valla 16, nr. 17
20141 Milano
Italy
Phone 39-02-8474-2250
Fax 39-02-8474-2251

Postfach 54
3280 Murten
Switzerland
Phone 00-800-5000-1090
Fax 00-800-6000-1090

CHINA

MEXICO

THAILAND

Rm 1204, Tomson
Financial Building
No. 710 Dongfang Road
Pudong, Shanghai
P.R. China 200122
Phone 86-21-5081-3900
Fax 86-21-5831-8177

Melchor Ocampo 193


Torre A piso 13
Col. Veronica Anzures
11300 Mexico D.F.
Mexico
Phone 52-55-5260-5991
Fax 52-55-5260-3310

163 Ocean Insurance Bldg.,


16th Fl., Unit B
Surawongse Road
Bangrak Bangkok 10500
Thailand
Phone 66-2-634-1692
Fax 66-2-634-1694

DENMARK

NETHERLANDS

UNITED KINGDOM

Box 211
201 22 Malm
Sweden
Phone 46-40-611-13-60
Fax 46-40-611-94-15

Jules Verneweg 75
5015 BG Tilburg
Netherlands
Phone 31-13-58-35-400
Fax 31-13-58-35-499

52 Milford Road
Reading, Berkshire RG1 8L J
United Kingdom
Phone 44-118-955-0900
Fax 44-118-955-0925

FRANCE

NORWAY

UNITED STATES

rue Charles Dallire, BP 31


42161 Andrezieux
Bouthon Cedex
France
Phone 33-4-77-36-54-32
Fax 33-4-77-55-20-10

Postboks 148
1366 Lysaker
Norway
Phone 47-67-53-12-00
Fax 47-67-12-42-68

34600 Solon Road


Solon, Ohio 44139
U.S.A.
Phone 1-440-248-0100
Fax 1-440-248-0723

Copyright 2006 ERICO International Corporation.


All rights reserved. CADDY, CADWELD, CRITEC,
ERICO, ERITECH, ERIFLEX, and LENTON are registered
trademarks of ERICO International Corporation.

M621C

M1195CT06ENNA

012150M6

You might also like