Professional Documents
Culture Documents
Expanda-Seal
To reduce emissions, Shand & Jurs designed and patented a high performance valve sealing technology called Expanda-Seal, which offers reduced tank emissions and odors for every process environment imaginable. This innovative design actually uses the internal vessel pressure to create a tighter seal the closer the pressure gets to the set point. Expanda-Seal ensures less than 0.5 SCFH air at 95% of the set point; the end result is a nearly bubble-tight seal.
When pressure inside the tank is below the set point, the deflated diaphragm rests on the seat ring in a typical manner, as with any normal valve, retaining internal pressure.
As the pressure approaches set point, the Expanda-Seal, diaphragm inflates and wraps around the mating seat to achieve this unique sealing effect.
When the pressure in the tank is at or above set point, the valve lifts to relieve the overpressure.
Conservation Vents
94020 Weight Loaded Conservation Vent
Sizes 2 through 12 Provides Pressure and Vacuum Relief Options: Open Vent, Closed Vent, Flame Snuffer, Cryogenic Hood, Steam Jacketed, Limit Switch, Insulation Jackets All Weather Option Innovative Expanda-Seal ANSI, DIN, and JIS Flanges Available CE/ATEX Approved
Shand & Jurs provides standard or custom engineered products and systems to meet all your requirements to assure you that all your tanking needs are fulfilled. The latest advances in technology and proven field experience are taken into consideration by the product development team. Installation, operations and maintenance are all available from the L&J Technologies Service Group.
Proximity Switch
Sends Signal to Control Room to Indicate Pallet Opened
Visual Indicator
Typical Configurations
B A C D
E F I
H
Fixed Roof Tank
A. 95021 Gauge Hatch B. 94570 Combination Conservation Vent & Flame Arrester C. 94221 Emergency Vent-Manhole Cover Pressure & Vacuum D. 95500 Cable Sheave E. F. G. H. I.
G
95600 Cable Winches 96311 Internal Safety Valve 95661 Swing Joints 96181 Water Drain Valve 92021/ 92500 Mechanical Tape Gauge & MCG 2000MAX Transmitter
Pressure Vents
94130 Pressure Vent
Sizes 2 through 12 Relieves Excessive Pressure Provides High Flow Capacity at Low Overpressures and Low Leakage Options: Closed Vent, Open Vent, Steam Jacketed CE/ATEX Approved
Vacuum Vents
94100 Vacuum Vent
Sizes 6 or 10 125 PSI Operating Pressure Rating Low Temperature Service of -20F
ATEX Approved
AT E X
Deflagration Arresters
Shand & Jurs offers four models of deflagration arresters: the 94450 Combination Deflagration Flame Arrester & Free Vent, 94470 Combination Conservation Vent & Deflagration Flame Arrester, 94406 Deflagration Flame Arrester and 94407 Horizontal Inline Model Deflagration Arrester. Each model has been approved to meet EN 12874 and ISO 16852 test standards and comply with directive ATEX 94/4/ EC.
Gauge Hatches
FRP Equipment
Shand & Jurs provides FRP equipment that is: Used in H2SO4, HCL, EDC, Nitric, caustic and other severe services Designed for superior corrosion resistance in oxidizing environments Available in several materials to met exact requirements including 470 Derakane, 411 Derakane & Furan Made to provide a wide range of chemical compatibilities to corrosive fluids that previously required expensive exotic metal construction
94065 FRP Emergency Vent & Manhole Cover (Pressure & Vacuum)
Sizes 18, 20 and 24 470 Derakane Std., 411 Derakane and Furan Available Acids & Caustic Services API 650, ANSI 150 or DIN Flange Drilling Leakage Rate of 1 SCFH at 90% of Set Point
Tank Gauges
92021 Mechanical Tape Gauge
Acutrak 90 Cartridge Kit Atmospheric or Low Pressure Tanks (1-90) Digital Ground Reading Display Cast Aluminum Body and Parts Checker Knob Installation Kits for All Tank Types Accepts Any Transmitter ATEX Approved
10
Tank Valves
96181 Water Drain Valve
Sizes: 2, 3, 4
Drains Water from Storage Tanks Double Valve Construction Prevents Freezing Nitronic 60 Stem Flushing Action Keeps Valve Seat Clean Serviceable without Draining Tank Options: Threaded or Flange Mounted
Swingline Equipment
S&J Swinglines provide great operating and maintenance convenience by permitting servicing or replacement of valves and changes in piping without having to 95661 empty the tank. Swing Joints Swinglines allow for withdrawal of product from any level in the tank from top to bottom. They also offer an additional margin of tank safety. Placed in the up position, they can prevent loss or acciden tally opened valves and also prevent uncontrolled release of product.
96330I Internal Safety Shutoff and Operating Valve with Integral Position Indicator
Sizes 2 through 10 Mounted in Tank or Pipeline Closes Automatically when Operating Pressure Removed Type of Service: LP-Gas, Most Liquid Hydrocarbons, or Ammonia Tight Shutoff Less than 1.0 SCFM Air Leakage at 100 PSI between Tank and Line Positive Position Indicator 375 PSIG Service Pressure
Typical Application
A
LPG Bullet Tank
A. 96330I Internal Safety & Operating Valve
11
L&J Technologies offers a complete line of products that provide solutions for hundreds of Industrial and commercial applications. Visit us online at www.ljtechnologies.com
Tank Vents, Flame and Detonation Arresters, Fittings & FRP Equipment
Mold Level & Strip Guiding Measurement & Control Systems for Metals/Steel Industries
Locations
World Headquarters
5911 Butterfield Road Hillside, IL 60162 Phone: 708-236-6000 Fax: 708-236-6006
Houston Office
Singapore Office
www.ljtechnologies.com