You are on page 1of 6

CURRICULUM VITAE

5, RUE MED.DJLIDI-KEBILI 4200- Tunisia


PHONE (Tunisia) :
Mobile: ++216 20 649 755
Home: ++216 75 490 033
E-mail: lassaad.mokrani@gmail.com

CIVIL STATE
Name: MOKRANI
Forename: Lassaad Ben Mohamed
Date &Place of birth: 06/07/1973 in Kebili-Tunisia.
Family situation: Married [One child in charge].

EXPERIENCE
From 04/24/09 up to 08/24/09
Position: Field Engineer (Quarry Manager)
Company: Poulina BTP Libya
Project: Road Construction

Tasks
• Technical support for quarry units
• Following production of all road material requirements (Quantity and quality)
•Procurement of all quarry spare parts needs

From 03/01/04 up to 04/02/09


Position: Field Engineer (Quarry Superintendent then Quarry & Production Manager)
Company: SNC LAVALIN Intl.
Project: GREAT MAN MADE RIVER PROJECT phase I&II-Libya (690 Millions+1 Billion $)

Tasks
• Management of whole quarry department: 4 pre-screening and 2 screening-crushing units.
• Coordinate all these unit’s supplies from the plant and spare parts requisitions.
• Coordinate all the production order for aggregates.
• Personal daily reports and control of supervisors.
• Assist on the QC/QA inspection and analysis from the quarry.
• Supervising construction projects relative to the quarry department
-Supervising laying water supply pipes
-Supervising civil works of Hard stand Hangar
-Supervision of the repairs within recycling big water pools
• Leading structure repairs of the apron and the parking area of “Elkharrouba Airport Libya”.
1
-Supervising the demolition of the bended concrete structure
-Supervising the leveling and backfilling (Compaction etc...)
-Supervising the steel reinforcement placement (Rebar and joints)
-Supervising the formworks
-Supervising the concrete pouring of the structures

From 01/02/03 to 02/15/04


Position: Senior Engineer
Company: CRC SA. Company.
Project: Construction of an industrial unit of concrete pipes manufacturing (2 Millions $)

Tasks
• Management of all the project components and schedules
• Preparation of the architecture and engineering design
• Preparation and planning all tasks
• Issuance of relative PRs of the whole factory’s components: Steel structure, moulds and vibrating pouring system,
Batch plant 1500l/mixing, hoists 20t and 05t, forklifts 12t and 05t, Electric transformation post of 1000KVA
• Engineer responsible of receiving all the equipments: Moulds (From Colle), Batch plant and conveying system
(From Elle-Erre), hoists (From DEMAG), concrete pumps (From Schwing Stetter)………….
• Supervising the civil and steel structures job
-Supervision the survey implantation of the civil structures
-Supervising the pouring of all concrete structures (Piles foundations, Machinery holding structures
ETC...)
-Supervising the civil construction of the electric main supply unit.
-Supervising the masonry of the project
-Performing the onsite sketch and check up of all the drawings.
• Surveying the safety certification lead by the steel construction company.
• Pricing Engineer within 3-sewage treatment plants (STP) projects.
• Participation as CRC’s representing engineer in many colloquies: Public Projects rules, right of the employee in
the company, PEHD welding techniques, Stress in constructions and road maintenance [reparation techniques….]

From 11/21/01 to 12/31/02


Position: Communal Engineer
Company: Local Community-Medenine
Project: NA

Tasks
• Responsible Engineer:
-Logistic:

2
-Planning the daily tasks of all the Heavy Equipments on hand
- Planning their maintenance following manufacturers standard schedules
HE: Wheel loaders, excavators, tractors, trucks, cars etc...
• Managing all the administrative and employee’s schedules.
• Supervising the mechanic and the welding shops.
• Affording technical assistance within some communal construction:
-Drainage structure inspection
-Road construction conformity inspection
-Communal civil construction masonry inspection

From 11/20/99 to 11/10/01


Position: Construction Inspector
Company: Ministry of High Education
Project: Tunisian science city-Tunis (20 Millions $)

Tasks
• Supervising the civil and hydraulic part of the project
-Supervising the Civil Works: Excavation, Foundations, structure Construction, masonry and water
tightness of two big water recycling reservoirs,
-Supervising the Construction of a Huge water pool with 2 levels, drainage, Fresh water Feeding pipes
laying, Pavement,
-Supervising construction of special civil structures built to protect other main delivery pipes.
• Supervising the steel structure part of the contract
-Supervising the steel structure concrete foundations
-Supervision steel structure placement conformity (Conformity to the approved drawings, Welding quality
to standards etc...)
-Supervising the placement of glass water channel
•Supervising the electromechanical equipments relative civil structures (Water intake reservoirs, holding structure
of Archimedes screw etc...)
• Responsible of hand over of the glass channel set in [Mur en verre] factory in France.
• Owner representative in all the technical meetings relative to the project.
• Reporting Engineer: High, weekly, management meetings with the owner's Project General Manager.

From 06/01/99 to 11/19/99


Position: Civil Engineer
Company: EUROAFRICAINE BREDERO
Project: Construction of two concrete bridges-Kasserine (4 Millions $)

Tasks

3
• Chief Engineer in the construction of two bridges [One of pre-stressed (post-tensioned) and one of Concrete steel
reinforced beams]
-Supervising the steel reinforcement of six holding beams of the bridge
-Supervising their form works placement
-Supervising their pouring
• Responsible: of “deep foundation” team in 2 sites.
-Supervising the holing of six deep foundation
-Supervising their steel reinforcement placement
-Supervising their pouring
• Managing all the project’s administrative & technical schedules
• Surveying the Fressynet team the post-tensioning operation
From 09/20/98 to 02/20/99
Position: Field & design civil Engineer
Company: CRC SA.
Project: Road-Mazzouna (1 Million $)

Tasks
• Design and structure’s calculations: within the company’s engineering department.
• Supervising one road project [14 Km length]
-Supervising the surveying implantation of the new road
Supervising the earth work, compaction and the standard tests within the foundation and base layers
Supervising the make in place of the running layer
-Supervising after preparing myself the design of two water submersible structure to cross some water
flows
• Cooperate on the construction of one concrete dam.

STUDIES
• 1995-1998 : Bachelor degree of principal civil engineer (Hydraulic and construction) from the High national
engineering school of Tunis [ENIT].
• 1997-1998: One year Master degree in Hydraulic& environmental.
• 1993-1995 : Certificate of success in the national scientific exam to accede high engineering school.
• 1992-1993 : Baccalaureate certificate appreciation GOOD in Mathematics branch.

TRAININGS
• August 1996: Employee training period: Road project of BOUAGILA Sarl. Company
Practice on Road project of 60 km, in various soil classes.
• August 1997: Engineer training period with engineering company AEUD: Studies of 2 concrete beam bridges,
Calculation general overview and AutoCAD & Robot R14 practice.
4
• From January till June (6 Months) 1998: Engineering Research about Reverse Osmosis Desalination process.
Experimental Project done within ¨ Tunis Environmental Technologic Center (CITET) ¨ in cooperation with ¨National Society
of Water Distribution¨ (SONEDE) and ¨Tunis Engineering High School¨ (ENIT).

LANGUAGES
• English : Spoken, written [Fluently, very well].
• French : Spoken, written [Fluently, very well]
• German : Spoken and written [medium]
• Arabic : Native language
COMPUTER SKILLS
• Microsoft office XP& Internet techniques
• Robot Bat 2002
• AUTO CAD, MELODY &CACT2000
• RISA 2000

EXTRA KNOWLEDGES
• Hydraulic design and calculation skills
• Surveying good background
• Well knowledge in concrete mix design and concrete pathology in general
• Concrete calculation and design skills
• Well knowledge in pre-stressed cylinder concrete pipes, according to Price Brother technology
• Well knowledge in public project laws and procedures
• Well knowledge in diesel generators (operations& mechanical)
• Knowledge in warehousing procedures and of the use of the one relative program “coswin “
• Good knowledge in environmental procedures in construction projects.
• Good theoretical background in structure calculation and soil mechanic.
• Good background in project management control parameters.
OTHERS
• Sale Engineer, on 2007, (Tunisia &Libya representative) with HAVER& BOECKER AH: German Leader in
screens and wire.
• Admitted, on 2004, within “GAUFF ENGINERING-GMBH” to exercise as site engineer in STP projects in
Africa.
• Admitted, on 2003, to follow a civil engineering Doctoral Degree in”Munchen Technical Universitate” of
Munich-Germany

5
• Admitted& accepted, on 1999, to teach as Technologic assistant at the Tunisian Technical Institutes of Gafsa&
Rades
• Admitted, end 1999, after technical interview to join FERROVIAL (Spanish company). As concrete QC
inspector (Rades Stadium).
• Admitted, on 1992/1993, to follow university studies in France& Morocco.

REFERENCES
• Mr. Daniel Lamarre: Project Director (SNC Lavalin Intl.-Montreal)
• Mr. Denis Brulotte: Administration Manager& Deputy Plant manager (SNC Lavalin Intl.-Qatar)
• Mr. Ratel Abdelhamid: General Manager (CRC Sa.-Tunisia)
• Mr. Guellali Tahar: Ministry of high Education (Geology Professor Tunisia)
• Mr. Ben Abdessalem Med.: Vice President & Mr. Ben Azzouz Med.: President (AEUD-Tunisia)
• Mr. Arafet Ammar: Project Manager (EUROFRICAINE BREDERO-Tunisia)

NB: I am German permanent resident (EC)

You might also like