Professional Documents
Culture Documents
CODE OR SPECIFICATION:
BASE MATERIAL:
HEAT # :
FILLER:
COST CENTER:
PROGRAM CODE:
COST ACCT.:
WORK PKG.:
WORK ORDER:
FCR #:
WELDING PROCEDURE:
WELDER(s):
Ac ce p Re t je c t C
REMARKS
Additional Notes/Comments:
Field Change Request (FCR) Weld Id. & Location Accept/Reject Attributes & Severity Remarks Inspectors Signature Date
Each weld should have a unique id. And the location must be descriptive enough to repeat the inspection Each weld must be determined and recorded as acceptable or rejectable Mark each attribute inspected with a number from 0 to 4 (0= none, 1= trace, 2= minor, 3= marginal, 4=rejectable) A place to record any other information needed Each Inspection report must be signed by the person who performed the inspection Each report must be dated when the Inspector signs the inspection report.
Page 2 of 2