You are on page 1of 2

V i s h ay I n t er t e c h n o l o g y, I n c .

INNOVAT

VISHAY ESTA POWER CAPACITORS


PhMKDg ESTAdry D-Type Capacitor

AND TEC
HN

O L OGY

19

62-2012

Capacitors - ESTAdry D-Type, Low Voltage

Key BeNeFits
Smallest available height for 50-kvar units: 210 mm (+ 68 mm for terminals) Excellent heat dissipation Screw-on terminal with M10 bolts Resin filling provides thermal conductivity similar to that of oil-filled capacitors Aluminum case is welded and hermetically sealed

APPLICATIONS
Recommended for power factor correction and filters in low-voltage applications 1000 V

ResoUrces
Datasheet: PhMKDg - http://www.vishay.com/doc?13007 For technical questions contact esta@vishay.com

Discrete Semiconductors and Passive Components

One of the Worlds Largest Manufacturers of

PRODUCT SHEET

1/2

VMN-PT9018-1201

This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

www.vishay.com

www.vishay.com

PhMKDg..., Triangular, LVAC V i s hPower ay I n t er t e c h n o l o g y, I n c . ESTAdry D-Type, LVAC Capacitors


Self-healing technology
INNOVAT

Vishay ESTA
AND TEC

ESTAdry D-Type, LVAC Power Capacitors VISHAY ESTA POWER CAPACITORS


www.vishay.com

FEATURES

Vishay ESTA

HN

O L OGY

Smallest PhMKDg..., Triangular, LVAC Self-healing technology

FEATURES

Over pressure tear-off fuse

www.vishay.com

PhMKDg..., Triangular, LVACavailable height for Smallest 50 kvar units: with 210M10 mmbolts Screw-on terminal ESTAdry D-Type, LVAC Power Capacitors (+ 68 mm for terminals) Resin filling provides thermal conductivity similar to that of

Vishay Over pressure tear-offESTA fuse Excellent heat dissipation


oil-filled capacitors

available height for 50 kvar units: 210 mm (+ 68 mm for terminals)


19
62-2012

PhMKDg

www.vishay.com

Screw-on with M10 bolts Vishayterminal ESTA Aluminum case is welded and hermetically sealed Self-healing technology ESTAdry D-Type, LVAC Power Capacitors Resin filling provides thermal conductivity similar that of No paint required forto OUTDOOR application Over pressure tear-off fuse
210 mm UL and cUL approved Self-healing technology (+ 68 mm for terminals) Aluminum case is welded and hermetically sealed Over pressure tear-off fuse Excellent heat dissipation FEATURES APPLICATIONS No paint required for OUTDOOR application Smallest availabletechnology for terminal 50 kvar with units: 210 mm height Screw-on bolts Self-healing Areas with dust and moisture, which require a high degree M10 UL and cUL approved (+ 68 mm for terminals) Resin filling provides thermal conductivity similar to that of Excellent heat dissipation oil-filled capacitors

FEATURES oil-filled capacitors Smallest available height for 50 kvar units: ESTAdry D-Type, LVAC Power Capacitors

ESTAdry D-Type Capacitor

Vishay ESTALVAC PhMKDg..., Triangular, Excellent heat dissipation


FEATURES

Capacitors - ESTAdry D-Type, Low Voltage

Over pressure tear-off fuse (+ 68 mm for terminals)

Smallest available height for 50 kvar units: 210 mm Screw-on terminal with M10 bolts Aluminum case is welded and hermetically sealed OUTDOOR

APPLICATIONS

of protection and high creepage distances. Also for OUTDOOR

Resin filling provides conductivity similar to thatapplication of thermal No paint required for OUTDOOR of protection and high creepage distances. Also for transformers) Excellent heat dissipation oil-filled capacitors UL and cUL approved Aluminum case is welded with and hermetically Screw-on terminal M10 bolts sealed

Areas with dust and moisture, which requirefixed a high degree Free standing, individual-PFC (e.g. motors, lighting, Automatic central-PFC (e.g. group of loads)

APPLICATIONS Free similar standing, fixed (e.g. motors, lighting, No required for OUTDOOR application paint Resin filling provides thermal conductivity to that ofindividual-PFC Harmonic trap (e.g. UPS, frequency drives, converter) transformers) Areas with dust and moisture, which require a high degree UL and cUL approved oil-filled capacitors Pole mounted PFC of protection and high creepage distances. Also for Automatic central-PFC (e.g. group of loads) Aluminum case is welded and hermetically sealed APPLICATIONS OUTDOOR

25

Pole mounted PFC of protection and high creepage distances. Also for transformers) Series PhMKDg, triangular PhMKDgF, triangular OUTDOOR Automatic central-PFC (e.g. group of loads) APPLICATIONS ESTAdry D-type, LVAC power capacitors ESTAdry D-type, LVAC power capacitors DIMENSIONS, INDOOR Free standing, fixed lighting, www.vishay.com Description individual-PFC Harmonic trap (e.g. (e.g. motors, UPS, frequency drives, converter) - INDOOR, IP00 dry - OUTDOOR, IP00 QUICK REFERENCE transformers) DATA Areas with dust and moisture, which require a high dry degree Pole mounted PFC Required space for bulging Type Capacitors, voltage triangular Capacitors, fixed, low voltage Series PhMKDg, triangular PhMKDgF, of protection and creepage distances. Also forfixed, low Automatic central-PFC (e.g.high group of loads)

Areas with dust andmoisture, which require a high degree (e.g. motors, lighting, Free standing, fixed individual-PFC www.vishay.com QUICK REFERENCE DATA UL and cUL approved

Harmonic trap (e.g. UPS, frequency drives, converter) No paint required for OUTDOOR application

PhMKDg..., Triangular, LVAC


Vishay ESTA
Vishay ESTA

PhMKDg..., Triangular, LVAC

15.8 + 1

TypeINDOOR ENSIONS, Output min. (kvar) Voltage max. (V)

Capacitors, fixed, low voltage Capacitors, fixed, low voltage x In, 30 Capacitance min. (F) 3-phase D: 3 x 115.5, 3-phase Y: 3 1.3 x 140.1 3-phase D: 3 x 115.5, 3-phase Y: 3 x 140.1 Output min. 30 MKP,(kvar) metallized polypropylene film MKP, metallized film Overcurrent 1.5 x In polypropylene with 10 % overvoltages, 15 % over capacitance and harmonics included, Capacitance max. (in (F) 3-phase D: 3 x 331.6, 3-phase Y: 3 continuous x 334.3 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 accordance with the above standards) operation Output max. (kvar) 56.2 56.2 Series PhMKDg, triangular PhMKDgF, triangular Voltage max. (V) 1000 1000 Please also refer to Terms and Definitions. www.vishay.com www.vishay.com Output min. (kvar) 30 30 Capacitance min. (F) 3-phase D: 3D-type, x 115.5,LVAC 3-phase Y: www.vishay.com 3x 140.1 3-phase D: 3 115.5, 3-phase Y: 3 x 140.1 ESTAdry power capacitors ESTAdry D-type, power capacitors -x 5/+ 10 % in LVAC accordance with the standards Description Output max. (kvar)Tolerance on capacitance 56.2 56.2 dry - INDOOR, IP00 - OUTDOOR ,standard IP00 x5331.6, %dry as3-phase Vishay ESTA Capacitance max. (F) 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 3-phase D: 3 Y: 3 x 334.3

H1

ESTAdry D-type, LVAC power capacitors - M10 ESTAdry D-type, LVAC Technology MKP,bolt metallized polypropylene film power capacitors MKP, metallized polypropylene film Harmonic trap (e.g. UPS, frequency drives, converter) Screw dry - INDOOR, IP00 Hexagonal nut M10 dry - OUTDOOR, IP00 Free standing, lighting,1000 mounted PFC Voltage max. (V) fixed individual-PFC (e.g. motors, 1000 TECHNICAL DATA Pole S prin g washer wave Series PhMKDg, triangular PhMKDgF, triangular Type Capacitors, fixed, low voltage Capacitors, fixed, low voltage transformers) Slotted nut M10 IEC 60831-1+ 2, EN 60831-1 + 2, LATEST EDITION Capacitance min. (F)capacitors 3-phase D: 3UL810 x 115.5, 3-phase Y: 3 x 140.1 3-phase D: 3 x 115.5, 3-phase Y: 3 x 140.1 STANDARDS ESTAdry D-type, LVAC power - FILE ESTAdry D-type, LVAC power UL/ULC #of E97723 Screw bolt M8 capacitors x 15 Technology MKP, metallized polypropylene film MKP, metallized polypropylene film Description Automatic central-PFC (e.g. group loads) dry - INDOOR, IP00 dry - OUTDOOR, IP00 QUICK REFERENCE DATA Capacitance max. (F) 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 U + 10 % (up to 8 h daily) cn Voltage max. (V) 1000 1000 Harmonic trap (e.g. UPS, frequency drives, converter) Type Capacitors, fixed, low voltage Capacitors, fixed, low voltage Series PhMKDg, triangular PhMKDgF, triangular (up to 30 min daily) Ucn + 15 % Output min. (kvar) 30 30 Overvoltages + 20 % (up to 5metallized min, 200 time s in film theD: life the capacitor) U ESTAdry D-type, LVAC power capacitors - polypropylene ESTAdry LVAC power capacitors cnx Technology MKP, metallized film MKP, polypropylene Capacitance min. (F) 3-phase D: 3 115.5, 3-phase Y: 3 only x-140.1 3-phase 3 of x 115.5, 3-phase Y: 3 x 140.1 Pole mounted PFCD-type, (in accordance with the above standards) Description + 30 % (up to 1 min, only 200 times in the life of the capacitor) Udry - INDOOR, IP00 dry OUTDOOR , IP00 cn Output max. (kvar) 56.2 56.2 Voltage max. (V) Capacitance max. (F) 10003-phase D: 1000 Please also3-phase refer to Y: Terms and Definitions. 3 x 331.6, 3 x 334.3 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3

ESTAdry D-TYPE PhMKDg, INDOOR OUTDOOR


Description
+2 68 - 2

M10

QUICK REFERENCE DATA

Type

+2 44 - 2

QUICK REFERENCE DATA Technology

PhMKDg..., Triangular, LVAC


Vishay ESTA
M12

PhMKDg..., Triang PhMKDg..., Triangular, LVAC


www.vishay.com Vishay ESTA DIMENSIONS, OUTDOOR
+1

fixed, low voltage Test voltage,Capacitors, terminal/terminal DIMENSIONS, INDOOR 30


Test voltage, terminal/casing MKP, metallized 56.2 polypropylene film
25

DIMENSIONS, OUTDOOR Capacitors, fixed, low voltage test) 2.15 xU cn, VAC, 2 s (routine Toothe d lock washer 30
25

Technology Output max. (kvar) Capacitance min. (F)


+2 68 - 2 +2 44 - 2

15.8

Inrush current

Output min. (kvar) Output max. (kvar)

+2 44 - 2

Capacitance max. (F)

1000 M10 Screw bolt M10 Losses 3-phase D: 3 x 115.5, 3-phase Y: 3M10 x 140.1 Hexa gonal nut Statistical life expectancy Spring washer wave 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 Slotted nut M10 Degree of protection S crew bolt M8 x 15 30 Ambient temperature category 56.2 Permitted casing temperatureRevision: 27-Jul-11
Cooling Permissible relative humidity Revision: 27-Jul-11 Mounting position Safety features

+2 68 - 2

Document Number: 13007


H 1

Revision: 27-Jul-11 Maximum allowed altitude

H1

15.8 + 1

15.8 + 1

DISCHARGE RESISTORS CasingWITHOUT Aluminum can, welded top THIS DOCUMENT IS SUBJECT TO CHANGE NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
Filling agent Terminals
172

For technical questions, contact: esta@vishay.com

Toothe d lock washer ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M12 Dielectric M12 Polypropylene film, self-healing Hexagonal nut M12 Y

Toothed lock washer Hexagonal nut M12

+2 68 - 2

+2 68 - 2

Revision: 27-Jul-11

Drawing 6 All-phase overpressure tear-off fuse, self-healing

+2 44 - 2

+2 44 - 2

DOCUMENT IS SUBJECT TO CHANGE NOTICE. THEHEREIN PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT THIS DOCUMENT THIS IS SUBJECT TO CHANGE WITHOUT NOTICE. THEWITHOUT PRODUCTS DESCRIBED AND THIS DOCUMENT Mounting and grounding Threaded M12 stFORTH ud at the bottom of the container ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET AT www.vishay.com/doc?91000 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Document Number: 13007 1

For technical questions, contact: esta@vishay.com Vertical

For technical questions, contact: esta@vishay.com

H1

Naturally air-cooled For technical questions, contact: esta@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Maximum 95 TO % SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ARE SUBJECT Document Number: 13007 1 sea level 2000 m above Document Number: 13007 1
78

and horizontal

H 1

160

Resin-filled (ESTAdry), non-PCB, non-toxic


70

X X:

M10 172 70

Screw bolt M8 X 10 Slotted nut M10 Spring washer wave Hexagonal-nut M10 Screw bolt M10
X X:

15.8

M12

+1

Required space for bulging

Hexagonal 6000 VAC , 2 s (routine test) MKP, metallized polypropylene film nut M12 56.2

300 times rated current In 1000 M10 Screw bolt M10 0.4 W/kvar to 0.5 W/kvar (without discharge resistors) 172 3-phase D: 3 x 115.5, 3-phase Y: 3 x 140.1 Hexagonal nut M10 > 130 000 70 operating h (ESTAdry) 3-phase D: 3 x 331.6, 3-phase Y: 3 x 334.3 Spring washer wave Slotte d nut M10 IP00 (terminal cover for higher protection class upon request), indoor 30 Screw bolt M8 x 15 - 25/D (max. 55 C), (- 40/D on request) 56.2 Max. 65 C (measured on top of the can) 1

Required space for bulging

Hexagonal nut M12 Toothed lock washer

M 172 70

Threaded studs M10 172

70 CAPACITORS IN TRIANGULAR CASING, INDOOR 3-PHASE

Revision: 27-Jul-11

160

4.0 4.0 4.0 4.0

160

Document Number: 13007 CURRENT RATED RATED CAPACITANCE VOLTAGE OUTPUT A F V HEREIN AND kvar THIS DOCUMENT (50 Hz) THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PhMKDg400.3.50 5345-44814-xx 400 50 3 x 331.6 72.2 1 TYPE ARTICLE NO. (1) For technical questions, contact: esta@vishay.com

WEIGHT kg

HEIGHT H mm 210 210 210 210 210 210 Drawing 7 210

Revision 27-Jul-11

160

78

78

PhMKDg440.3.56, 2

5345-44805-xx

440/415 460 525 690 760

56.2/50 50 50 50 50

3 x 308.0 3 x 250.7

73.7/69.6 62.8

PhMKDg460.3.50 5345-44803-xx RECOMMENDED TORQUES

HARGE RESISTORS

PhMKDg525.3.50 5345-44806-xx STYLE PhMKDg690.2.50 5345-44807-xx Terminals M8 DISCHARGE Drawing 6 PhMKDg760.2.50 5345-44808-xx RESISTORS

Terminals M10

M12 mounting stud Packing units

ORDERING INFORMATION
Y

ACCESSORIES: SUPPORT FOR POLE AND WALL MOUN ACCESSORIES: SUPPORT FOR 10 POLE Nm AND WALL MOUNTING

3 x 192.5 55.0 4.0 RECOMMENDED TORQUE 3 x 334.3 41.8 4.0 Drawing 6Y 6 Nm 3 x 275.5 Y 38.0 4.0
Y

78

PhMKDg440.3.50

5345-44804-xx

440

50

3 x 274.0

65.6

78

10 Nm 1 piece per carton

Notes Other volltage ratings, outputs, and frequencies on request. (1) Version no. xx may differ as it respects small changes, e.g. on the label

A-A

COMMENDED TORQUES

27-Jul-11 Document Number: 13007 3 For technical questions, contact: esta@vishay.com This documentRevision: is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO M16 For technical questions, contact: esta@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 M16 RECOMMENDED TORQUES THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STYLE RECOMMENDED TORQUE A

Revision: 27-Jul-11

200

Document Number: 13007

200

PRODUCT SHEET

2/2

VMN-PT9018-1201

You might also like