You are on page 1of 5

NaviFirm+ 3.1 - rewritten from scratch by Marco Bellino - based on EPICBIZNUS id ea http://www.symbian-toys.com/NaviFirm.

aspx NaviFirm+ full features are available to Donors only. Make a Donation to get immediately a NaviFirm+ account. Terms and Conditions: your account (or even the whole service), could be suspended or terminated at an y time, without prior notice and without refund. By donating you accept these Terms. Features Available to non-donors: - Search latest firmware version by Product Code - Download latest firmware version - Add Product Codes to the Favourite List to be notified of new firmware release s Additional Features Available to donors only: - Notification of firmware changes since last login. - Freely browse all the Firmware versions available for any device. - Download / Copy to ClipBoard, any firmware version. - Show hidden/replaced/removed variants *** History *** 3.1 Change-Log: - Improved: support for public shared account 3.0 Change-Log: - New: shows a warning message for those accounts whom generates too much traffi c - Improved: disabled the keypress-auto-repeat in the listboxes to avoid flooding the server with a lot of requests and get the account disabled - Fixed: the bitcoin email field was too short - Fixed: login issues for some Turkish accounts 2.9 Change-Log: - New: Bitcoin accepted! ;) It is now possible to donate using Bitcoin, the open -source p2p electronic money available worldwide! - Improved: shows the current transfer speed (kB/s = kilobytes per second, 1kB/s = 1000bytes/s) - Improved: automatically search for Product Code after 3 seconds of inactivity, in case that the "enter" key is missing - Improved: shows the proper measure unit in the file details (KiB = kibibytes, 1KiB = 1024bytes) 2.8 Change-Log: - Improved: client/server transfer speed - Improved: registry is not used anymore. Username, password and GUI settings ar e now saved in the Config_v3.xml (.NET Framework will store it under %LOCALAPPDA TA%) - Fixed: important issue in cache management of hidden variants and current vari ants: were cached using the very same data. - Fixed: some NaviFirm+ settings were lost after an automatic update. - Fixed: the welcome box containing the recent changes was not showed after an a utomatic update. - Fixed: detect and removes empty server responses from the cache

2.7 Change-Log: - New: interrupted and incomplete downloads can be resumed, avoiding to download the whole file again! - New: downloads can be temporarily paused and restored later - New: migrated to .NET Framework v4 - Improved: if, for any reason, some firmware file is invalid, it will be automa tically reported to NaviFirm+ server and it will be fixed asap. - Improved: handling of server error messages sent to the client has been rewrit ten - Fixed: some panels sizes, were not restored properly on launch. - Fixed: changed the default value to optional = false during the vpl parsing - Fixed: in a very particular case, the product list was empty - Fixed: double-click on download window to open the destination path was not wo rking properly when clicking on labels 2.6 Change-Log: - Improved: keeps the windows and panel sizes preferences for the GUI. - Improved: handling of wrong text/html responses, instead of text/xml. - Improved: handling of "product code not found on caresuite". - Improved: handling of corrupted cache files. The corrupted cached file will be automatically deleted and content will be donwloaded again. 2.5 Change-Log: - Improved: Welcome Message can now be scrolled - Improved: minor GUI changes - Fixed: crash when downloading a firmware which has been found through Nokia Ca re Suite and user is donor - Fixed: the item "Upload New Product Codes" is now disabled properly - Fixed: filters gets cleared when searching on Nokia Care Suite 2.4 Change-Log: - New: Variants that (for any reason) have been replace/removed/hidden from Noki a Care Suite server, will be shown by NaviFirm+ in RED colour. You can change this behaviour by manually editing the Config_v2. xml file and set ShowHiddenVariants to False. - Improved: Favourite list can now detect new Variants available for the same Pr oduct Code / Software Release (it can happen when a variant is replaced by Nokia with another) - Improved: it is possible to donate using Credit Card or Skrill/MoneyBookers. T hese donations are accepted worldwide, also from counties not supported by PayPa l. 2.3 Change-Log: Non-donors will be happy to know that in this release, they can use some basic f eatures of NaviFirm+ without needed to login ;) These are the NaviFirm+ features available to Non-donors: - insert a Product Code to check the latest available release in Nokia Care Suit e server - download the latest available release from Nokia Care Suite server - add some Product Code to the Favourite list to be notified when a new software release is available in Nokia Care Suite server - New: Search in Nokia Care Suite feature (available to non-donors too). You can now insert a Product Code in the textbox to search for it in Nokia Car e Suite Server Non-donors that were using Nokia Care Suite Tool to search for new firmware ve rsions, can totally replace it with NaviFirm+ ;) - Improved: the Favourite Product Codes feature has been opened to the non-donor s too.

- Improved: minor GUI changes - Fixed: some issues in the auto-update features (delay for the app-restart was too short) 2.2 Change-Log: - Improved: Favourite Product Codes are now saved on a different file MyProductC ode.xml - Improved: internal code refactoring for better maintenance - Improved: minor GUI changes - Fixed: unexpected crash when selecting the variant, while the cache was automa tically cleared - Fixed: sometimes users received the message "invalid username or password" - Known Issues: doesn't support proxy. Proxy support will be added in next relea ses. 2.1 Change-Log: - New: you can now report missing Product Code, by uploading a .txt list of prod uct codes to the server, so the missing Product Codes will be added to the datab ase. "Product Codes > Upload New Product Codes to NaviFirm+" the product codes listed in the .txt file should follow any of these form ats: 059T1S4:RM-892 VAR EURO GB O2 SL BLACK 059S917:RM-892 VAR GB CV WHITE 059S8H6 059S8L8 RM-839 EURO_E5_YELLOW_CYRMAC_MK 059S125 RM-839 EURO_E5_YELLOW_GREEK_GR 059S127 - Improved: Favourite Product Codes list has been limited to a maximum of 10 ent ries - Improved: prevents running multiple NaviFirm+ instances - Fixed: all the datetime fields are now saved as UTC format, fixing some cache handling issues. - Known Issues: doesn't support proxy. Proxy support will be added in next relea ses. 2.0 Change-Log: - New: NaviFirm+ automatically downloads and installs new updates - New: Engine Rewritten from scratch - New: Favourites Product Codes list - Improved: trasfer speed! network communication is gzip-compressed - Improved: caching policy is handled by the server, you don't need to worry abo ut cleaning the cache to get fresh results - Improved: refuses to add duplicated files to the download queue - Improved: minor GUI improvements - Removed: ShowExtendedInfo and ServerIndex settings - Known Issues: doesn't support proxy. Proxy support will be added in next relea ses. 1.7 Change-Log: - New: Ported to .NET Framework 4.0 - New: Shows additional Product informations in the tooltip, including phone's i mage. Note that the tooltip is disabled by default, if you want to enable it, y ou must change the NaviFirmPlus.Config file in this way: <setting name="ShowTooltip" serializeAs="String"> <value>True</value> </setting> 1.6 Change-Log: - New: added notifications about the current connection status and the amount of

trasferred bytes - Improved: .vpl file is now handled without showing any window (you can disable the .vpl parsing changing the NaviFirmPlus.exe.config) - Improved: better data transfer speed - Improved: connection engine has been rewritten - Improved: minor changes to the status bar - Fixed: crash when double-click on "Size" column - Fixed: sorting on the "Size" column was not working proprerly 1.5 Change-Log: - New: it is now possibile to Download up to 20 files simultaneously. You just n eed to increase the Download Sessions limit (default value is 2). - New: added option to automatically append the PC to the destination path 1.4 Change-Log: - New: the download manager has been rewritten from scratch. Using the new Downl oad Queue you can enqueue all the fw files you need to download, while keeping t o use NaviFirm+ - Improved: the Parse VPL checkbox has been removed, you can change this setting through the NaviFirmPlus.exe.config file 1.3 Change-Log: - Fixed: Bad layout on Chinese System - Improved: Minor GUI changes 1.2 Change-Log: - Fixed: Error when downloading large files. - New: Added filesize and filetype details. - New: Parse VPL option, will automatically download and parse the VPL file and will select mandatory fw files. 1.1 Change-Log: - New: Added support for Nokia Care Suite Server! This server contains additiona l fw files, like the Drive E: 16Gb file for N8. - Improved: At startup will use the latest server choosen by the user. 1.0 Change-Log: - Fixed: The connection to the Quality Assurance server wasn't working properly. 0.9 Change-Log: - Fixed: Due to some old debug code I forgot, NaviFirm+ unexpectedly closed itse lf after the 20 December. 0.8 Change-Log: - Fixed: Crash on Windows 7 0.7 Change-Log: - Improved: From now on this software, available on Symbian-Toys.com website, wi ll be named NaviFirm+ in order to distinguish it from other variants. - Improved: Download window provides detailed informations about the downloads 0.6 Change-Log: - New: Can be embedded as NokiaCooker's plugin 0.5 Change-Log: - New: Added Caching. - New: Advanced Filter for Results. - New: Copy URLs to ClipBoard. This feature can be used to download files using any extenal Download Manager you like. - Improved: Columns can be resized

- Improved: Window can be resized

You might also like