Professional Documents
Culture Documents
Geometry Data
Item Code Analysis Method Base Plate Minimum Length Base Plate Maximum Length Base Plate Minimum Width Base Plate Maximum Width Base Plate Increment of length and width Base plate thickness Base Plate Increment of Thickness Base Plate Fy Base Plate E Pedestal F'c Pedestal Fp[ For Fp(Use ACI 318-99 value)] Pedestal Length Pedestal Width Number of Bolts along Length Number of Bolts along Width D1 Value Unit AISC-ASD Rigid Plate 0.65 m 0.7112 m 0.65 m 0.7112 m 0.00635 m 0.0127 m 0.003175 m 248211.284 kN/m2 199947978.8 kN/m2 28181.87 kN/m2 8273709.468 kN/m2 2m 2m 2m 2m 0.25 m
2.13 ft 2.33 ft 2.13 ft 2.33 ft 0.02 ft 0.04 ft 0.01 ft 174.876 lbs/in2 140872.721 lbs/in2 25.59 in 28.00 in 25.59 in 28.00 in 0.25 in 0.50 in 0.13 in FPS UNIT
4000 psi
5829.216 78.74 78.74 78.74 78.74 9.84
281.8187
D2 D3 D4
Bolt Positions
Bolt No. 1 2 3 4
X-Position Z-Position
Unit
-9.84 -9.84 9.84 9.84 -9.84 9.84 -9.84 9.84
Property Data
Item Country Shape Dimension Value Unit US(Imp) W W8x31
Attachment Type
Item Select Type of Attachment Select Type of Stiffener Connection No of Bolts Inside The Stiffeners Along The Length Value Unit None Type A
No of Bolts Inside The Stiffeners Along The Width Minimum Stiffener to Bolt Distance Stiffener Plate Height Stiffener Plate Thickness 0.0762 m 0.6096 m 0.0635 m
3.00 24.00 2.50
cm
1/4 in
2000.000 lbs/in2 288000 lbs/ft2
2838704 kN/m2
0.32258 6.350 3.810 7.620
sq.cm cm cm cm
9.853 in
Load Data
Item Vertical Load (P) Horizintal Shear Along The Length (Vx) Horizintal Shear Along The Width (Vz) Moment About The Axis Along The Length (Mx) Moment About The Axis Along The Width (Mz) Value Unit 45 kN 10 kN 10 kN 200 kNm 20 kNm
2045.45455 lb 454.545455 lb 454.545455 lb 2982581.72 lb-ft 298258.172 lb-ft 35790981 lb-in 3579098.1 lb-in
Unit
Allowable Minimum Edge Distance = The Anchor Bolt Closer to the on the Length Side Edge is Bolt Number 1 and the Edge distance is Edge distance is 29.528 > Minimum Edge Distance = The Anchor Bolt Closer to the on the Width Side Edge is Bolt Number 1 and the Edge distance is Edge distance is 29.528 > Minimum Edge Distance = 19.685 OK
W = 2.0 * e = 2.0 * 6.043 = 12.085 Tension in anchor bolt Fy= Moment in bolt= Plate Thickness for ASD tp = e6.0 * Tenison * e / ( 0.75 * Fy * W )
Bolt 1
Bolt Tension = 0.00. Bolt dia= 10 cm 3.94
Required Bolt Length Mininimum Embedded length =12 * dia = 47.244 in Bolt 2
Bolt Tension = 51682.17 17.247 cm2 2.67 in2 120 cm 47.24 in
Bolt Area Required = T / ( 0.33 * Fu ) = 51682.170 / ( 0.33 * 58000.000 ) Bolt Area Required < Bolt Area OK Projected Surtface Area Apsf = T / ( 2 eFc ) = Required Bolt Length = e( Apsf / p ) = Cone Surface is overlaping, the length of the bolt is increased to
Cone Surface is overlaping, the Adjusted Apsf 457.240 for the length of the bolt = 12.407 in Required Bolt Length 12.407 < Mininimum Embedded length ( 12 * dia ) 47.244. Provided length =47.244 in
Bolt 3 Bolt Tension = 0.00. So, Required Bolt Length = Mininimum Embedded length 12 * dia = Bolt 4 Bolt Area Required = T / ( 0.33 * Fu ) = Bolt Area Required < Bolt Area OK
3.32 47.24
Projected Surtface Area Apsf = T / ( 2 eFc ) = Required Bolt Length = e( Apsf / p ) = Cone Surface is overlaping, the length of the bolt is increased to Cone Surface is overlaping, the Adjusted Apsf 536.068 for the length of the bolt = 13.653 in Required Bolt Length 13.653 < Mininimum Embedded length ( 12 * dia ) 47.244. Provided length =47.244 in