Professional Documents
Culture Documents
Issue: 1
A25000-A0501-A028-01-76P1
The information in this document is subject to change without notice and describes only the product defined in the introduction of this documentation. This documentation is intended for the use of Nokia Siemens Networks customers only for the purposes of the agreement under which the document is submitted, and no part of it may be used, reproduced, modified or transmitted in any form or means without the prior written permission of Nokia Siemens Networks. The documentation has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Nokia Siemens Networks welcomes customer comments as part of the process of continuous development and improvement of the documentation. The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products are given "as is" and all liability arising in connection with such hardware or software products shall be defined conclusively and finally in a separate agreement between Nokia Siemens Networks and the customer. However, Nokia Siemens Networks has made all reasonable efforts to ensure that the instructions contained in the document are adequate and free of material errors and omissions. Nokia Siemens Networks will, if deemed necessary by Nokia Siemens Networks, explain issues which may not be covered by the document. Nokia Siemens Networks will correct errors in this documentation as soon as possible. IN NO EVENT WILL NOKIA SIEMENS NETWORKS BE LIABLE FOR ERRORS IN THIS DOCUMENTATION OR FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA,THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT. This documentation and the product it describes are considered protected by copyrights and other intellectual property rights according to the applicable laws. The wave logo is a trademark of Nokia Siemens Networks Oy. Nokia is a registered trademark of Nokia Corporation. Siemens is a registered trademark of Siemens AG. Other product names mentioned in this document may be trademarks of their respective owners, and they are mentioned for identification purposes only. Copyright Nokia Siemens Networks 2009. All rights reserved.
The same text in German: Wichtiger Hinweis zur Produktsicherheit In elektrischen Anlagen stehen zwangslufig bestimmte Teile der Gerte unter Spannung. Einige Teile knnen auch eine hohe Betriebstemperatur aufweisen. Eine Nichtbeachtung dieser Situation und der Warnungshinweise kann zu Krperverletzungen und Sachschden fhren. Deshalb wird vorausgesetzt, dass nur geschultes und qualifiziertes Personal die Anlagen installiert und wartet. Das System entspricht den Anforderungen der EN 60950 / IEC 60950. Angeschlossene Gerte mssen die zutreffenden Sicherheitsbestimmungen erfllen.
Table of Contents
This document has 12 pages. 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.1 2.2 2.3 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intended audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Structure of this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Symbols and conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . History of changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Waste electrical and electronic equipment (WEEE) . . . . . . . . . . . . . . . . RoHS compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supporting frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1+0 Supporting frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1+1 Supporting frames for Hot stand-by . . . . . . . . . . . . . . . . . . . . . . . . ODU interface plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 7 7 8 9 9
10 10 10 12
List of Figures
Figure 1 Figure 2 Figure 3 Figure 4 WEEE label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1+0 Supporting frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1+1 Balanced supporting frame for Hot Standby . . . . . . . . . . . . . . . . . . 11 1+1 Supporting unbalanced frame for Hot Standby . . . . . . . . . . . . . . . . 11
List of Tables
Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Structure of this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 List of conventions used in this document . . . . . . . . . . . . . . . . . . . . . . . 7 History of changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1+0 Supporting frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1+1 Balanced supporting frame for Hot Standby . . . . . . . . . . . . . . . . . 11 1+1 Supporting unbalanced frame for Hot Standby . . . . . . . . . . . . . . . 12 ODU interface plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Preface
1 Preface
This document provides the technical description and the technical specifications of the accessories used with the HC AP ODU.
1.1
Intended audience
This document is intended to the radio network planners and to the technicians in charge to operate and maintain the HC AP ODU.
1.2
Table 1
1.3
Preface
Representation
Keyboard button
Meaning Keyboard keys are represented with a surrounding box. Example: Press Enter .
[Square brackets] Keyboard shortcuts are represented using square brackets. Example: Press [CTRL+ALT+DEL] to open the Task Manager. > The > symbol is used as short form to define a path through individual elements of the graphical user interface, e.g., menus and menu commands. Example: On the Windows taskbar, select Start > Programs > TNMS > Client menu command to start the TNMS Core/CDM Client.
A tip provides additional information related to the topic described. A note provides important information on a situation that can cause property damage or data loss. A note introduced in the text by the keyword NOTICE: describes a hazard that may result in property damage but not in personal injury.
A safety message provides information on a dangerous situation that could cause bodily injury. The different hazard levels are introduced in the text by the following keywords: DANGER! - Indicates a hazardous situation which, if not avoided, will result in death or serious (irreversible) personal injury. WARNING! - Indicates a hazardous situation which, if not avoided, could result in death or serious (irreversible) personal injury. CAUTION! - Indicates a hazardous situation which, if not avoided, may result in minor or moderate (reversible) personal injury.
Table 2
Screenshots of the graphical user interface are examples only to illustrate principles. This especially applies to a software version number visible in a screenshot.
1.4
History of changes
Issue 1 Issue date October 2009 1st version . Remarks
Table 3
History of changes
Preface
1.5
Figure 1
WEEE label
The correct disposal and separate collection of waste equipment will help prevent potential negative consequences for the environment and human health. It is a precondition for reuse and recycling of used electrical and electronic equipment. For more detailed information about disposal of such equipment, please contact Nokia Siemens Networks. The above statements are fully valid only for equipment installed in the countries of the European Union and is covered by the directive 2002/96/EC. Countries outside the European Union may have other regulations regarding the disposal of electrical and electronic equipment.
1.6
RoHS compliance
FlexiMetro2 complies with the European Union RoHS Directive 2002/95/EC on the restriction of use of certain hazardous substances in electrical and electronic equipment. The directive applies to the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenylethers (PBDE) in electrical and electronic equipment put on the market after 1 July 2006. Materials usage information on Nokia Siemens Networks Electronic Information Products imported or sold in the Peoples Republic of China FlexiMetro2 complies with the Chinese standard SJ/T 11364-2006 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The standard applies to the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE) in electrical and electronic equipment put on the market after 1 March 2007.
Supporting frames
2 Supporting frames
2.1 1+0 Supporting frame
Refer to Figure 2 and Table 4. The 1+0 supporting frame consists of a mechanical structure, and relevant waveguide accessories, suitable for pole or wall mounting the Outdoor Unit in a 1+0 configuration. From an electrical point of view the frame is a passive device (i.e. waveguide section) that provides interconnection between its two ports with negligible insertion loss. The 1+0 supporting frame is used (quantity: 2) also in 1+1 and 2+0 (Ring) configurations with 2 antennas.
B A
ODU
waveguide Frame
1+0 Supporting frame Freq. Range (GHz) 31.8 - 33.4 37.5 - 39.5 W.G. Type WR28 R320 WR28 R320 Port A Flange type UBR320 UBR320 Port B Flange type PBR320 PBR320
2.2
10
Supporting frames
ODU
B
ODU
Figure 3 Code Freq. Band (GHz) Frame TYPE
Splitter
Frame
1+1 Balanced supporting frame for Hot Standby Freq. Range (GHz) Guide type Port A Flange type Port B,C Flange type Nominal Coupling B-A C-A (dB)
32 38
UBR320 UBR320
UBR320 UBR320
3.6
1+1 Balanced supporting frame for Hot Standby Unbalanced frame Refer to Figure 4 and Table 6. The 1+1 supporting frame for Hot Stand-by consists of a mechanical structure, and relevant waveguide accessories, suitable for pole or wall mounting the Outdoor Unit in a 1+1 HSBY (Hot Stand-by) unbalanced configuration. From an electrical point of view the 1+1 frame for unbalanced configuration is a 10:1 coupler. The signal incoming from the antenna port is split unbalanced towards the two ODUs.
C
ODU
B
ODU
Figure 4
Coupler
Frame
11
Supporting frames
Code
Frame TYPE
Guide type
UBR320 UBR320
UBR320 10 UBR320
2.3
12