You are on page 1of 12

COMPACT CATALOGUE

SECTIONAL PROPORTIONAL LOAD--SENSING VALVE

DLS8
Features
Simple, compact and heavy duty designed sectional valves from 1 to 10 sections, for systems with fixed displacement pumps (open centre version) or variable displacement pumps with Load--Sensing compensator (closed centre version). H Load--indipendent flow control. H Fitted with a main pressure relief valve and a load check valve on every working section. H Diameter 18 mm -- 0.71 in nterchangeable spools. H A wide variety of ports service valves. H Available manual, pneumatic, hydraulic, electro--hydraulic and remote with flexible cables spool control kits.

Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40C temperature.

Nominal flow rating Operating pressure (maximum) Back pressure (maximum) Internal leakage A(B)T Fluid Fluid temperature Viscosity

Stand by 14 bar / 200 psi on outlet port T Dp=100 bar - 1450 psi fluid and valve at 40C with NBR (BUNA-N) seals with FPM (VITON) seals operating range min. max.

90 l/min 315 bar 25 bar 3 cm3/min Mineral base oil from --20 to 80C from --20 to 100C from 15 to 75 mm2/s 12 mm2/s mm2/s 400 from 15 to 75 cSt 12 cSt 400 cSt 4600 psi 360 psi 0.18 in 3/min

Max level of contamination Ambient temperature Tie rod tightening torque NOTE - For different conditions please contact Customer Service.

19/16 -- ISO 4406 from --40 to 60C 30 Nm 22.2 lbft

Additional information This catalogue shows the product in the most usual configurations. Please contact Customer Service Dpt. for more detailled information or special request. WARNING! All specifications of this catalogue refers to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice.

WALVOIL IS NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY AN INCORRECT USE OF THE PRODUCT.

3rd edition January 2000: This edition supercedes all prior documents.

DCC002E

DLS8
Dimensional data (with inlet compensator)
Valve type

WALVOIL P9900001 11C200005 MADE IN ITALY

Production batch : P99 = production year (1999) 00001 = progressive number 94 3.70

E 5 0.19 31 1.22 F 21.5 0.85

14 0.55 11 0.43

5 0.20

WALVOIL P9900001 11C200005 MADE IN ITALY

50 1.97 36.5 1.44

62 2.44 90 3.54 269.5 10.61

14 0.55

66 2.60

8 0.31

19 0.75

Position 1 Posit. 0

M10 41 1.61 41 1.61 41 1.61

37.5 1.48

Position 2 33 1.3 22.5 0.89 120 4.72 52.5 2.07

TYPE DLS8/1 DLS8/2 DLS8/3 DLS8/4 DLS8/5

E
mm 145 186 227 268 309 in 5.71 7.32 8.93 10.55 12.16 mm 82 123 164 205 246

F
in 3.23 4.84 6.46 8.07 9.68

Weight
kg 8.6 12.3 16 19.7 23.4 lb 19 27.1 35.3 43.4 51.6

TYPE DLS8/6 DLS8/7 DLS8/8 DLS8/9 DLS8/10

E
mm 350 391 432 473 514 in 13.78 15.39 17 18.61 20.22 mm 287 328 369 410 451

F
in 11.3 12.91 14.52 16.13 17.74

Weight
kg 26.9 30.6 34.3 38 41.7 lb 59.3 67.5 75.7 83.9 92.1

Standard threads
PORTS Inlet P -- Outlet T A and B ports Load sensing LS PILOT PORTS Pneumatic Hydraulic NPTF 1/8--27 G 1/4 NPTF 1/8--27 SAE 6 (9/16--18 UNF) BSP
(ISO228/1)

SAE UN-UNF SAE 10 (7/8--14 UNF) SAE 8 (3/4--16 UNF) SAE 6 (9/16--18 UNF)

G 3/4 G 1/2 G 1/4

DCC002E

DLS8
Hydraulic circuit Fixed displacement pump (open centre)
P A1 B1 A2 B2

LS
0.75mm 0.029in

1mm 0.039in

125 1800

Ex.: DLS8/2/AM(G3--125)/6N8LF3/6N8LF3/RF

Variable displacement pump with load- sensing compensator (closed centre)


With main relief valve
P A1 B1 A2 B2

1mm 0.039in

LS

125 1800

Ex.: DLS8/2/AN(G3--125)/6N8LF3/6N8LF3/RF

Without main relief valve


P A1 B1 A2 B2

LS

Ex.: DLS8/2/AP(SV)/6N8LF3/6N8LF3/RF

DCC002E

DLS8
Performance data Open centre
From top inlet to top outlet.
40 (bar)

(pressure drop vs. flow)

T A1 A10

540 (psi)

30 Pressure drop 360 20 180

P B1 B10

10

0 0 30 60 Flow 90 120 (l/min)

Inlet to work port


From top inlet to A port (spool in position 1) or B port (spool in position 2).
40 (bar)

Pressure drop

T P

A1

A10

30

PA10(B10) PA6(B6) PA1(B1)

540 (psi)

360

20

B1

B10

10

180

0 0 30 60 Flow 90 120 (l/min)

Work port to outlet


From A port (spool in position 2) or B port (spool in position 1) to top outlet.

T A1 A10

40 (bar) 30 Pressure drop A10(B10)T 20 A6(B6)T A1(B1)T

540 (psi)

360

P B1 B10

10

180

0 0 30

NOTE -- Measured with spool type 6N.


DCC002E

60 Flow

90

120 (l/min)

DLS8
Ordering codes Example:
1st section following section

DLS8/2 A M (G3 - 125) / 6N 8 LF3 . P 3 (G3 - 120) / 6N 8 LF3 / 1. 2. 3. 5. 6. 7. 8.


1 2 3
mounted on A port. mounted on B port. mounted on A and B ports.

RF * 9.

Load-sensing pressure relief valve setting in bar

Port relief valve setting in bar

1.

Inlet cover kit *


DESCRIPTION Type AM Type AN Type AP

CODE 5FIA308310 5FIA308311 5FIA308312

6.
7FT

2.

Compensator options
DESCRIPTION Compensator kit Replacing compensator kit

TYPE CODE (M)- (N) 5KIT008300 (P) 5KIT008310

3.

Inlet relief options

8MD

TYPE CODE DESCRIPTION Load-sensing pressure relief valve (G3- 125) XCAR602100 Range 100 to 200 bar / 1450 to 2900 psi standard setting 125 bar / 1800 psi (G4- 250) XCAR602200 Range 160 to 315 bar / 2320 to 4570 psi standard setting 250 bar / 3600 psi Standard setting is referred to 10 l/min flow. (SV) XTAP220440 Relief valve blanking plug

4.

M-N

4.

Working section kit *


DESCRIPTION Standard

CODE 5EL1083000

Include boby, seals, rings and load check valve.

3. 2. 1.
G3 G4 SV

5.

Spool options

TYPE CODE CIRCUIT DESCRIPTION Double acting, 3 position, with A and B closed in neutral position 6V 3CU3410020 Spool flow 20l/min 6Q 3CU3410040 Spool flow 40l/min 6S 3CU3410060 Spool flow 60l/min 6N 3CU3410090 Spool flow 90l/min Double acting, 3 position, with A and B open to tank in neutral position 7V 3CU3425020 Spool flow 20l/min 7Q 3CU3425040 Spool flow 40l/min 7S 3CU3425080 Spool flow 60l/min 7N 3CU3425090 Spool flow 90l/min Flows are referred to Dp of 14 bar (200 psi)

10.

NOTE (*) -- Items are referred to BSP thread. 6

For special configurations see pages 9


DCC002E

DLS8
Ordering codes 6.
TYPE 7FT 8

A side spool positioners


CODE 5V07208100 5V08108000 DESCRIPTION With friction With spring return in neutral position

10. 9.

7.
TYPE LF3 SLP TQ LCB

B side options
CODE 5LEV108710 5COP108000 5TEL108110 5CLO208000 DESCRIPTION Lever with stroke limiters Without lever, with dust proof plate CD cable connection Mechanical joystick

8.

Port relief options

8.
P

I
U

TYPE CODE DESCRIPTION Anti-shock valve P(G3- 100) 3XCAR208113 Range 50 to 220 bar / from 730 to 3200 psi standard setting 100 bar / 1450 psi P(G4- 200) 3XCAR208114 Range 180 to 350 bar / from 2600 to 5100 psi standard setting 200 bar / 2900 psi Anti-shock and anti-cavitation valve U(G2- 63) XCAR308112 Range 20 to 80 bar / from 230 to 1160 psi standard setting 63 bar / 900 psi U(G3- 100) XCAR308115 Range 50 to 220 bar / from 730 to 3200 psi standard setting 100 bar / 1450 psi U(G4- 200) XCAR308114 Range 180 to 350 bar / from 2600 to 5100 psi standard setting 200 bar / 2900 psi Standard setting is referred to 10 l/min flow. C P3T XCAR408110 Anti-cavitation 3XTAP524290 A and B ports valve blanking plugs

7.

9.
TYPE RF

Return cover *
CODE 61C431000 DESCRIPTION Standard

P3T

LF3

10. Assembling kit


CODE 5TIR108128 5TIR108169 5TIR108210 5TIR108251 5TIR108292 5TIR108333 5TIR108374 5TIR108415 5TIR108456 5TIR108497 DESCRIPTION tie rods with nuts for 1 sections tie rods with nuts for 2 sections tie rods with nuts for 3 sections tie rods with nuts for 4 sections tie rods with nuts for 5 sections tie rods with nuts for 6 sections tie rods with nuts for 7 sections tie rods with nuts for 8 sections tie rods with nuts for 9 sections tie rods with nuts for 10 sections

5.
SLP

M-N

TQ

LCB

Optional handlevers
CODE 170012020 170013120 DESCRIPTION For LF3 lever box L= 200mm/7.87in For LCB joystick L= 200mm/7.87in

TYPE AL01/M10x200 AL08/M12x200

2.

DCC002E

DLS8
Spools options
1

A side spool positioners

88 3.46

50 1.97

7FT

B side options

Vertical handlever assembly M10

Horizontal handlever assembly

51 2.01 40 1.57

75 2.95 87 3.43

22.5 0.89

9 0.35

SLP

40 1.57

77.5 3.05

LF3

2
M12 98 3.86

97.5 3.84

CD flexible cable to be ordered separately

LCB

1 1

0 0

2 2

TQ

DCC002E

DLS8
Special configurations Proportional pneumatic A side spool positioner
1
VA VB NPT1/8-27 VA 46.5 1.83 VB

8PF

123 4.84

Ex.: EL DLS8--6N 8PF....


Spool control kit: code 5V08108705 Standard spool Special working section kit: code 5EL108300D (standard body)

Operating features
Adjustment range : from 1 to 5.5 bar / 14.5 to 79.8 psi diagram 501A Max.pilot pressure : 10 bar / 145 psi

Proportional hydraulic spool control


1
VA

2
VB

8IMF3

G 1/4 VA

59 2.32 VB

73.5 2.89 90.5 3.56 323 12.72

Ex.: EL DLS8--6N 8IMF3


Spool control kit: code 5IDR208220 Standard spool Special working section kit: code 5EL108300A (standard body)

Operating features
Adjustment range : from 6 to 16.3 bar / 87 to 236 psi diagram 021 Max.pilot pressure : 50 bar / 725 psi

DCC002E

DLS8
Installation and maintenance
The DLS8 valve is assembled and tested as per the technical specification of this catalogue. Before the final installation on your equipment, follow the below recommendations: ---the valve can be assembled in any position; in order to prevent working section deformation and spool sticking mount the product on a flat surface; in order to prevent the possibility of water entering the lever box and spool control kit, do not use high pressure wash down directly on the valve; prior to painting, ensure plastic port plugs are tightly in place.

A2 A1 T P B1 B2

LS
AN inlet cover configuration

Fittings tightening torques - Nm / lbft


THREAD TYPE BSP (ISO 228/1) With O--Ring seal With copper washer With steel and rubber washer SAE With O--Ring seal P and T ports G 3/4 70 / 51.6 70 / 51.6 70 / 51.6 SAE 10 (7/8--14 UNF) 90 / 66.4 A and B ports G 1/2 50 / 36.9 60 / 44.3 60 / 44.3 SAE 8 (3/4--16 UNF) 60 / 44.3 LS signal G 1/4 20 / 14.7 25 / 18.4 16 / 11.8 SAE 6 (9/16--18 UNF) 30 / 22.1

NOTE -- These torque are recommended. Assembly tightening torque depends on many factors, including lubrication, coating and surface finish. The manufacturer shall be consulted. 10
DCC002E

Master Distributors and Resellers


AUSTRALIA SOUTHCOTT PTY.LTD Halifax street G.P.O.B. 1063 5000 Adelaide S.A. tel. 0061 8 2282411 fax. 0061 8 2233413 RACHER MASCHINEN HYDRAULIK Redlham 100 4800 Attnang Puchheim tel. 0043 7674606 fax. 0043 7674 606 22 HAGOMAT Guldensporenstraat 70 1800 Vilvoorde tel. 0032 2 2521373 fax. 0032 2 2512263 CANIMEX INC. 285 St. Georges J2C 4H3 Drummondville Quebec tel. 001 819 477 1335 fax. 001 819 477 2908 DRENNAN COMPANY LTD. 2111 Wing on House 71 Des Voeux Road Central Hong Kong tel. 00852 2817 3523 fax. 00852 2817 3735 DANFOSS HYDRAULIK A/S Toppevadvej 44-46 Ganloese Postboks 429 Stenloese 3660 tel. 0045 42 184055 fax. 0045 42 184603 BERENDSEN PMC OY AB PL 32 33901 Tampere tel. 00358 3 31410300 fax. 00358 3 2123748 FLUIDES TECH. APPLICATIONS 6 avenue H. Beaudelet Z.A. de la Gare 77330 Ozoir la Ferriere tel. 0033 1 64400029 fax. 0033 1 64403288 BALSTER HYDRAULIK G.m.b.H. Postfach 110141 44057 Dortmund tel. 0049 231 590021 fax. 0049 231 592645 NOLD HYDRAULIK+PNEUMATIK G.m.b.H. Enzisreute 88339 Bad Waldsee tel. 0049 7524 97200 fax. 0049 7524 972070 RAUH HYDRAULIK G.m.b.H. Hallstadter strasse 63 96052 Bamberg tel. 0049 951 966360 fax. 0049 951 9663699 TH. NIEHUES G.m.b.H. Bahnhofstrasse 81 48308 Senden, Bosensell tel. 0049 2536 99001 fax. 0049 2536 99019 GREECE C. PARIS & CO. O.E. 53 Marathonomachon str.akad 10441 Platonos, Athens tel. 0030 1 5135701 fax. 0030 1 5144579 ABS HYDRAULICS B.V. Lloydsweg 8 P.O.B. 6 9641 KK Veendam tel. 0031 598 6 22544 fax. 0031 598 6 20875 KAVEE HYDRAULICS Aaltenseweg 62 Postbus 149 7050 AC Varsseveld tel. 0031 315 254111 fax. 0031 315 244401 TECHNISCH CENTRUM GROOT B.V. Winkelerzand 3 P.O.B. 1 1731 LZ Winkel tel. 0031 224 544444 fax. 0031 224 544433 ICELAND LANDVELAR EHF Smiojuvegur 66 P.O. box 20 200 Kopavogur tel. 00354 557 6600 fax. 00354 557 8500 INDIA METTERS PRIVATE LT. 144 St. Johns Church Rd. Bangalore 560 005 tel. 0091 080 554 2949 fax. 0091 080 555 5064 NELSON HYDRAULICS LTD Unit 54, Cookstow Ind. Estate Tallaght Dublin 24 j tel. 00353 1 4510 622 fax. 00353 1 4510 893 L.Y.A. CO. LTD 105 Hahashmonaim st. 67011 Tel Aviv tel. 00972 3 5611712 fax. 00972 3 5613250 CONSUL FLUID S.A.S di Plicchi Fabio & C. via Luciano Romagnoli 27 40069 Zola Predosa, Bologna tel. 0039 051 6167474 fax. 0039 051 6167411 FER HYDRAULIK S.R.L via Lambrakis 16-16/A 42100 Reggio Emilia tel. 0039 0522 332177 fax. 0039 0522 553891 OLEODINAMICA GAMBINI S.R.L. Strade Cattane 8 36100 Vicenza tel. 0039 0444 962030 fax. 0039 0444 961993 OLEODINAMICA GIANNINI S.R.L. via Arno 13 50019 Osmannoro, Firenze tel. 0039 055 374691 fax. 0039 055 300290 OLEOMEC S.R.L. via Divisione Acqui 61027 Villa Fastiggi, Pesaro tel. 0039 0721 281861 fax. 0039 0721 281825 OLEO MECCANICA INDUSTRIALE COMPONENTI S.R.L. via Nenni 2 20060 Bussero, Milano tel. 0039 02 95330080 fax. 0039 02 95330090 PARMAFLUID S.R.L. via Azzoni 9/A 43100 Parma tel. 0039 0521 480711 fax. 0039 0521 480750 RVS DI CAVIASSO A. & C. S.A.S. via Macedonia 24 10097 Collegno, Torino tel. 0039 011 4031333 fax. 0039 011 4031479 KOREA TOKIMEC KOREA HYDRAULICS CO. LTD LG Bldg 5F 152 055 Guro-Dong, Guro-Gu, Seoul tel. 0082 2 630 5850 fax. 0082 2 630 5859 POWER FLUIDTRONICS AND SDN BHD. No 12 and 14 Seksyen 31, Kota Kemuning 40460 Shah Alam Selangor tel. 0060 3 5220188 fax. 0060 3 5220133 MECOMAR S.A. 7 Rue Abdelwahed el Marrakchi Oukacha, Casablanca tel. 00212 2 661550-1-2 fax. 00212 2 661555 LAUTOM AS Hauger Skolevei 18 1351 Rud tel. 0047 67 178300 fax. 0047 67 178305 POLAND IOW POLSKA U.L. Brukselska 10 3973 Warszawa tel. 0048 22 6161313 fax. 0048 22 6178485 GUSTAVO CUDELL LDA R.Eng.Ferreira Dias 954 4100 Oporto tel. 00351 2 6102004 fax. 00351 2 6158010 MOVICONTROL LDA Rua Prof.Henrique de Barros 5A P2685 Prior velho tel. 00351 1 9429900 fax. 00351 1 9413500 SINGAPORE FLO-LINE HYDRAULICS PTE LTD 47 Joo koon circle Singapore 629067 tel. 0065 8632 022 fax. 0065 8631 825

AUSTRIA

IRELAND

PORTUGAL

BELGIUM

ISRAEL

CANADA

ITALY

CHINA

DENMARK

SOUTH AFRICA HYFLO Southern Africa ltd P.O. box 240 Paarden eiland 7420 tel. 0027 21 511 7021 fax. 0027 21 5114456 LOWE ERNEST 6 Skew road 1460 Boksburg North tel. 0027 11 8944281 fax. 0027 11 8946108 SPAIN INTERSEAL S.A. Autovia de Castelldefels Km 5 08820 El prat de Llobregat Barcelona tel. 0034 93 3706711 fax. 0034 93 3701807 HYDRAC AB Getaengsvaegen 22 50263 Boras tel. 0046 33 127470 fax. 0046 33 125879

FINLAND

FRANCE

SWEDEN

GERMANY

SWITZERLAND BT HYDRAULIK AG Fischermattelistrasse 6 3000 Berna 5 tel. 0041 31 3798141 fax. 0041 31 3823980 TAIWAN LIMIT TEIN INDUSTRIAL CO. LTD 2F. NO. 8-1 lane 42 sec.3 TZU Ching rd. Sanchung city Taipei Hsien tel. 00886 2 9995022 fax. 00886 2 9995055 SRITONG ENGINEERING CO. LTD 8/233-236 Moo 4 Rama 2 10150 Bangmod chomthong, Bangkok tel. 00662 428 4171 fax. 00662 428 4180 AFRICA INDUSTRIE N.Z.I Ben Arous Tunis tel. 0021 61 1 384510 fax. 0021 61 1 384476 HIDRO KONTROL MAK. SANAYI VE TI Buyuk Sanayi 1 Cadde Arpacio 2 Ishani n. 95/11 Iskitler 6060 Ankara tel. 0090 312 3842895 fax. 0090 312 3414476 HIDROTAS DIS TICARET A.S. Halit Ziya bulv n.33 Zuhal is han-Izmir tel. 0090 232 4842253 fax. 0090 232 4837463 UNITED KINGDOM BYPY HYDRAULICS & TRANSMISSIONS LTD NO. 8 Lingen road sheet R.I.E. Ludlow salop sy8 1xd tel. 0044 1 584 873012/3/4 fax. 0044 1 584 876647 USA MC ELROY FLUID POWER 826 North Fulton 74158 Tulsa Oklahoma tel. 001 918 8369055 fax. 001 918 8319300

THAILAND

TUNISIA

HOLLAND

MALAYSIA

TURKEY

MOROCCO

NORWAY

NEW ZELAND VICKERS SYSTEMS LTD 77-79 Ben Lomond Crescent P.O.Box 51 076 Pakuranga Aoukland tel. 0064 9 576 9089 fax. 0064 9 576 5865

WALVOIL S.P.A. 42100 REGGIO EMILIA ITALY VIA ADIGE, 13/D TEL. +39.0522.932411 FAX +39.0522.300984 E-MAIL: INFO@WALVOIL.COM HTTP: //WWW.WALVOIL.COM CUSTOMER SERVICE TEL. +39.0522.932555 FAX +39.0522.932455

D1409808I DCC002E

You might also like