Professional Documents
Culture Documents
General Code number Approvals Compressors on pallet Application Application Frequency Evaporating temperature Voltage range Max. condensing temperature continuous (short) Max. winding temperature continuous (short) Cooling requirements Frequency Application 90F 100F 110F Remarks on application: Hz 50 F1 F1 F1 60 F1 F1 F1 F1 F1 F1
LBP MBP HBP LBP MBP HBP
104G7550 UL984 80
LBP/HBP Hz F V F F 50 60 -31 to 50 103 - 127 140 (158) 257 (275) S = Static cooling normally sufficient O = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature) F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally sufficent = not applicable in this area
Motor Motor type LRA (rated after 4 sec. UL984), HST | LST Cut in Current, HST | LST Resistance, main | start winding (77F) Design Displacement Oil quantity (type) Maximum refrigerant charge Free gas volume in compressor Weight without electrical equipment Dimensions Height inch A B B1 B2 Suction connector Process connector Discharge connector Oil cooler connector Remarks: location, I.D. in. | angle C material | comment location, I.D. in. | angle D material | comment location, I.D. in. | angle E material | comment location, I.D. in. | angle F material | comment 8.23 8.00 7.20 3.93 0.320-0.327 | 37 Cu-plated steel | Al cap 0.252-0.259 | 37 Cu-plated steel | Al cap 0.252-0.259 | 37 Cu-plated steel | Al cap cu.in fl.oz. oz. fl.oz. lbs. 0.93 20.3 (polyolester) 45.5 49.4 27.7 A A 42.0 42.0 1.0 CSIR 4.3
September 2011
DES.D.404.P1.22
1/2
ASHRAE LBP Evap. temp. in F Capacity in BTU/h Power cons. in W Current cons. in A EER in BTU/Wh ASHRAE HBP Evap. temp. in F Capacity in BTU/h Power cons. in W Current cons. in A EER in BTU/Wh EN 12900 Household (CECOMAF) Evap. temp. in F Capacity in W Power cons. in W Current cons. in A COP in W/W -49 -40 -49 -40 -49 -40
115V, 60Hz, fan cooling F1 -30 455 175 4.45 2.60 -20 780 252 4.70 3.10 -13 1088 306 4.91 3.56 -10 1241 329 5.02 3.77 0 1837 408 5.40 4.51 10 2570 486 5.85 5.28 14 2876 545 6.45 5.29 20 3440 566 6.35 6.08 30 4448 645 6.91 6.89 40 5595 726 7.52 7.71 41 5725 753 8.12 7.61 45 6222 766 7.84 8.12 50 6884 807 8.18 8.53 59 68
115V, 60Hz, fan cooling F 1 -30 403 175 4.45 2.31 -20 692 252 4.70 2.75 -13 965 306 4.91 3.15 -10 1100 329 5.02 3.34 0 1628 408 5.40 3.99 10 2276 486 5.85 4.68 14 2559 545 6.45 4.71 20 3045 566 6.35 5.38 30 3934 645 6.91 6.10 40 4945 726 7.52 6.81 41 5084 753 8.12 6.76 45 5496 766 7.84 7.17 50 6078 807 8.18 7.54 59 68
115V, 60Hz, fan cooling F1 -30 109 175 4.45 0.62 -20 187 252 4.70 0.74 -13 260 306 4.91 0.85 -10 297 329 5.02 0.90 0 439 408 5.40 1.08 10 614 486 5.85 1.26 14 679 548 6.47 1.24 20 821 566 6.35 1.45 30 1060 645 6.91 1.64 40 1331 726 7.52 1.83 41 1352 759 8.15 1.78 45 1479 766 7.84 1.93 50 1635 807 8.18 2.03 59 68
Accessories for PTC starting device Starting relay Cover Start. capacitor 240 F Cord relief
SC15G 1/4 in. spade connect. 3/16 in. spade connect. 1/4 in. spade connect. 1/4 in. spade connect.
Figure a2 b c d
Test conditions Condensing temp. Ambient temperature Suction gas temp. Liquid temperature Mounting accessories Bolt joint for one comp. Bolt joint in quantities Snap-on in quantities
Code number : 5/8 in. : 5/8 in. : 5/8 in. 118-1917 118-1918 118-1919
Secop can accept no responsibility for possible errors in catalogues, brochures and other printed material. Secop reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are property of the respective companies. Secop and the Secop logotype are trademarks of Secop GmbH. All rights reserved. www.secop.com
2/2
DES.D.404.P1.22
September 2011