You are on page 1of 3

O05a: UCFIBRE Aerial fig-8

Self-supporting aerial cable, in figure 8 design, 2 48 fibres. VDE: A-DF2Y

Application and installation


Telecom trunk and access lines, CATV trunk lines or data communication connections The cable may be installed on poles with a span length of from 50 m to 100 m, depending on climatic conditions.

Standards
IEC 60794-3, IEC 60794-3-20, IEC 60794-4, ISO 11801 2nd edition, EN 50173-1:2002

General
This cable can be used for spans of up to 100 m depending of the loading conditions

Construction
Suspension strand Web Central strength member Loose tube Fibre colour code 7 x 1 mm galvanised steel strand, with covering to 4.8 mm Nominally: H: 3 mm W: 2 mm 2.5 mm FRP rod 2.3 mm loose tubes with 2 8 fibre 1 Red 5 White 2 Green 6 Grey 3 Blue 7 Brown 4 Yellow 8 Violet Jelly filling Polyester tape 2.0 mm black MDPE, IEC 60811, IEC 60708 Draka UCFIBRE Areal fig-8 <Fibre count><Fibre type><Fibre brand> <Item No>05<Batch Number><Meter mark> A-DF2Y <Number of Elements> x <Fibre count per element> <Fibre family> <Mode field diameter> /125 <Transmission Class>

Water blocking Wrapping Sheath Sheath Legend

LINKING THE FUTURE

www.prysmiangroup.com

O05a_e Version 10.3 | 2013-01-02 Page 1 of 3

O05a: UCFIBRE Aerial fig-8


Physical properties
Attribute Nominal outer diameter cable Nominal height of cable Nominal weight Tensile strength (dynamic) Tensile strength (permanent) Compressive strength (crush) Impact Min. Bending radius Temperature range Water penetration Nominal EA Coefficient of linear expansion Maximum span length IEC 60794-1-2 Method E1 E1 E3 E4 E11 F1 F5 11.5 mm 20 mm 190 kg/km >10 kN 6 kN 3000N 20 Nm R = 230 mm -40C to +70C No water on free end 1300 kN 15 mm/km/C 100 m Limits

Stringing and loading data


Span [m] Initial sag (2 % of span length) [m] Nominal stringing force [kN] Conditions at an external load of 20 N/m (ice or wind): Cable sag [m] Cable tension [kN] Cable strain [%] Fibre strain [%] Conditions at an external load of 30 N/m (ice or wind): Cable sag [m] Cable tension [kN] Cable strain [%] Fibre strain [%] Conditions at an external load of 40 N/m (ice or wind): Cable sag [m] Cable tension [kN] Cable strain [%] Fibre strain [%] 50 1.0 0.5 1.8 3.7 0.3 0.0 2.0 4.8 0.4 0.0 2.2 5.9 0.5 0.0 80 1.6 0.8 3.3 5.3 0.4 0.0 100 2.0 1.0 4.3 6.2 0.5 0.0 -

LINKING THE FUTURE

www.prysmiangroup.com

O05a_e Version 10.3 | 2013-01-02 Page 2 of 3

O05a: UCFIBRE Aerial fig-8


Product codes ordering information
Prysmian group material code Prysmian Group material description Draka Material code 1026414 1025730 Fibre count Fibre type Fibre data sheet C23 C23

UCFIBRE Aerial fig-8 6 MM51 UCFIBRE Aerial fig-8 12 MM51

6 (1 x 6) 12 (2 x6)

OM2 50/125 multi mode 500/500 OM2 50/125 multi mode 500/500 OM1 62.5/125 multi mode OS2 OS2 OS2 OS2 OS2 Single Single Single Single Single mode mode mode mode mode

UCFIBRE Aerial fig-8 24 MM61 UCFIBRE UCFIBRE UCFIBRE UCFIBRE UCFIBRE Aerial Aerial Aerial Aerial Aerial fig-8 fig-8 fig-8 fig-8 fig-8 8 SM2D 12 SM2D 24 SM2D 24 SM2D 24 SM2D

1026413 1025373 1025729 1026890 1026599 1026413

24 (3 x 8) 8 (1 x 8) 12 (2 x 6) 24 (3 x 8) 24 (4 x 6) 48 (6 x 8)

C02 C06e C06e C06e C06e C06e

[PRODUCT CODE TABLE]

PRYSMIAN GROUP 2010, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group.

LINKING THE FUTURE

www.prysmiangroup.com

O05a_e Version 10.3 | 2013-01-02 Page 3 of 3

You might also like