Professional Documents
Culture Documents
LASER
Plug Version
CP24MHT80
Part Number
Technical Data
Optical Data
Part Number
Replaces catalog device CP24MHT80
Table 1
Working Distance
40 mm 0.5 x 1.2 mm 160 mm 1 x 2.5 mm
Measuring Range Resolution Resolution (Speed-Mode) Linearity Linearity (Speed-Mode) Light Source Wave Length Service Life (T = +25C) Laser Protection Class (EN 60825-1) max. Ambient Light
120 mm < 20 m < 30 m 0.1 % 0.2 % Laser (red) 660 nm 100000 h 2 10000 Lux 18...30 V DC < 80 mA 750 Hz 300 Hz < 660 s < 1660 s < 10 m/C -25...50 C 0...10 V < 1 mA 4...20 mA < 500 Ohm RS-232 38400 Bd Teach-In Plastic IP 67 M 12x1 50 V
50 V
Error Output Analog Output RS-232 Interface Connection Diagram No. Control Panel No. Suitable Plug No.
508 P7
Electrical Data
Supply Voltage Current Consumption (Ub = 24V) Cut-Off Frequency Cut-Off Frequency (Resolution-Mode) Response Time Response Time (Resolution Mode) Temperature Drift Temperature Range Analog Output Current Load Voltage Output
508
CP24MHT80
Working Range
40...160 mm
Legend
Power supply "+" Power supply "0V" Power supply (AC Voltage) Switching output (1,2,3...) / NO Switching output (1,2,3...) / NC Contamination / Error output (NO) Contamination / Error output (NC) Input (analog or digital) Teach input Time delay (activation) Shielding RS-232 receive path RS-232 send path Test input Trigger input Analog output (1,2,3,...) Ground for the analog output Block discharge Valve output Valve control output "+" Valve control output "0V" Synchronization Receiver-Line Emitter-Line Grounding
High resolution 20m (Resolution-Mode) Linearity 0,1% (Resolution-Mode) Response Time <660s (Speed-Mode) Zoom function
Mechanical Data
Adjustment Housing Protection Mode Connection Protective Insulation, Rated Voltage
The sensor uses a high-resolution CMOS line array and DSP technology, virtually eliminating material, colour and brightness related measurement value differences. The Measurement range is calibrated accurate to 10m. Integrated analogue output can be configured for voltage 010 V (10...0 V) or current 420 mA (20...4 mA).
Accessories
Mounting Bracket WP Serial Interface Adapter S232W2
Output Graph
10
Ctrl.Panel
P7
25 63 12 03 24 07
a U/V
5.0
0.0
1= 2=
03 = Error Indicator 07 = Selector Switch 12 = Analog Output Indicator 24 = Plus Button 25 = Minus Button 63 = Analog Output Current Indicator
Specifications are subject to change without notice 38/04
www.wenglor.com