Professional Documents
Culture Documents
February 2007
46-1
Stacklights
Contents
Description Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Benets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standards and Certications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Technical Data and Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Catalog Number Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Selection Assembled Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46-2 46-2 46-2 46-3 46-3 46-4 46-5 46-6 46-9 46-10 46-11
46
CA08102001E
46-2
Product Description
Product Description
The E26 stacklight unit is a modular system that provides illuminated and audible status indication in all directions. Easily assembled plug-in modular units include constant, ashing and strobe light units, as well as mono-tonal, bitonal, intermittent audible alarms. Stacklights may be assembled in a variety of congurations, which are identied in the Maximum Congurations table on Page 46-4. Several lamp, color and mounting options further enhance the stacklights versatility.
Flashing Base
Features
Modular construction Six lens colors Variety of lamp types and voltages Mono-tonal, bi-tonal and intermittent audible alarms
Xenon Strobe
Xenon Strobe
Sets are similar to standard lens/ diffuser units, except each set consists of two lens units. The lower unit includes the electronics and is permanently fused to the upper unit which contains the Xenon lamp. Xenon units may be placed in any position in a complete stacklight unit. They will ash 60 times per minute when used with a standard or ashing base. See Page 46-6.
Benets
46
Combination of visible and audible alarms Modular components reduce inventory requirements, increase exibility Steady and ashing modes allow one light to signal multiple conditions No-tools assembly permits easy lamp replacement
Light Module
Light Modules
Available in a variety of colors for both incandescent lamps and LED lamps. To maximize illumination and light dispersion, incandescent units include an opal white diffuser while LED diffusers are clear. See Page 46-6.
Alarm
Alarms
May be tted to the top of a complete stacklight unit or directly to the stacklight bases, if desired. Available in three versions, each with adjustable sound levels. See Page 46-8.
Standard Base
CA08102001E
46-3
LED Lamps
Average operating life of 60,000 to 100,000 hours Low power consumption Extended life results in long-term savings
Ingress Protection
Application Data
Table 46-1. E26 Stacklight Incandescent Application Data
Type of Light 12V 24V 48V 110 140V 220 260V Lamp Used Approximate Current, mA per Light 417 208 104 36 50 23 27 Theoretical Lamp Life, Hours as Applied 7,000 7,000 7,000 7,000 12,000
Stacklight Base and Light Units: IP65, NEMA 4, 4X and 13 Alarm Units: IP20, NEMA 1
Shock (IEC 68-2-27): 11 mS, 15g Vibration (IEC 68-2-6): 10 sweeps 10 150 Hz, 2g Bump (IEC 68-2-29): 1000 pulses, 6 mS, 15g
Lamp Used DC AC DC AC DC AC AC AC
Approximate Current, Theoretical Lamp Life, mA per Light Hours as Applied 460 mA 780 mA 190 mA 320 mA 100 mA 150 mA 60 mA 30 mA 20,000 20,000 20,000 20,000 20,000 20,000 20,000 20,000
Climate Conditions
Operating: maximum 104F (40C) at 95% RH, Temperature -4 to 140F (-20 to 60C) Storage: Temperature -40 to 176F (-40 to 80C)
Materials
Cover: Polycarbonate Lenses: Polycarbonate Stacklight Base: Nylon Extension Tubes: Aluminum Mounting Base: Zinc die cast
Represents average current draw, 1.6A peak for 120V and 0.8A peak at 240V.
46
Terminals
14 30 AWG (2.5 0.05 mm2) for single conductors and 18 26 AWG (0.75 0.14 mm2) for two conductors of the same size. Do not mix solid and stranded wire in the same terminal. Recommended tightening torque is 4.4 5.3 lb-in (0.5 0.6 Nm).
12V AC/DC Red Amber Yellow Green Blue White Red Amber Yellow Green Blue White Red Amber Yellow Green Blue White Red Amber Yellow Green Blue White Red Amber Yellow Green Blue White
Electrical Ratings
24V AC/DC
Insulation Voltage (Ui): 690V Operational Voltage (Ue): 250V Impulse Withstand Voltage (Uimp): 1.5 kV
48V AC/DC
Bulb Specications
Incandescent Lamp Type: BA15d Maximum Lamp Wattage: 6W Bulbs Average Life: Incandescent: 7,000 to 12,000 hrs. (based on voltage) Xenon Flasher: 20,000 hrs. LED: 60,000 to 100,000 hrs. (based on colors)
60V AC/DC
LED/Incandescent Comparison
Incandescent Lamps
120V AC/DC
Average operating life of 7,000 hours Each lamp can be used with any color lens Low cost results in short term savings
Note: Published theoretical lamp lives are based on ideal laboratory conditions and should be used for comparison only. Actual life may be shorter due to various application conditions.
CA08102001E
46-4
E26X 9 KM L 3 9 R W V4
Code W 4 8 9 Mounting Base Description Component Catalog No. None (Base Mount) E26S104 3/4" NPT Hub, Chrome E26S108 Standard 3-Hole E26S109 Standard 4-Hole Extension Tube Description Component Catalog No. W None (Base Mount) Gray Aluminum E26BHM 20 mm 3/4" NPT HM E26BJM 160 mm 3/4" NPT JM E26BKM 360 mm 3/4" NPT KM E26BMM MM 760 mm 3/4" NPT Black Aluminum E26BHU 20 mm 3/4" NPT HU E26BJU 160 mm 3/4" NPT JU E26BKU 360 mm 3/4" NPT KU E26BMU 760 mm 3/4" NPT MU E26BRU Right Angle 3/4" NPT RU Code Stacklight Base Description Component Catalog No. Standard E26BL E26BF_ Flashing Alarm Code Description Component Catalog No. None W Mono-Tonal E26BQ_ Q E26BN_ Bi-Tonal N Intermittent E26BP_ P Light Module Description Clear Incandescent Red Incandescent Green Incandescent Yellow Incandescent Blue Incandescent Amber Incandescent White Cluster LED with Clear Lens Red Cluster LED with Red Lens Green Cluster LED with Green Lens Yellow Cluster LED with Yellow Lens Blue Cluster LED with Blue Lens Amber Cluster LED with Amber Lens White Cylindrical LED with Clear Lens Red Cylindrical LED with Red Lens Green Cylindrical LED with Green Lens Yellow Cylindrical LED with Yellow Lens Blue Cylindrical LED with Blue Lens Amber Cylindrical LED with Amber Lens Flashing White Cluster LED with Clear Lens Flashing Red Cluster LED with Red Lens Flashing Green Cluster LED with Green Lens Flashing Yellow Cluster LED with Yellow Lens Flashing Blue Cluster LED with Blue Lens Flashing Amber Cluster LED with Amber Lens Xenon Flasher with Clear Lens Xenon Flasher with Red Lens Xenon Flasher with Green Lens Xenon Flasher with Yellow Lens Xenon Flasher with Blue Lens Xenon Flasher with Amber Lens Voltage Code Description 12V V1 24V V2 48V V3 120V V4 V5 240V
Code 0 2 3 4 6 9 W R G Y B A W1 R1 G1 Y1 B1 A1 M E U V K Z X0 X2 X3 X4 X6 X9
46
Code L F
Component Catalog No. E26B0_ E26B2_ E26B3_ E26B4_ E26B6_ E26B9_ E26BW_ E26BR_ E26BG_ E26BY_ E26BB_ E26BA_ E26BW1_ E26BR1_ E26BG1_ E26BY1_ E26BB1_ E26BA1_ E26BM_ E26BE_ E26BU_ E26BV_ E26BK_ E26BZ_ E26BX0_ E26BX2_ E26BX3_ E26BX4_ E26BX6_ E26BX9_
If no voltage is specied, assembled stacklight will be supplied without lamps or LEDs. Component Catalog Numbers for ashing bases, alarm units and light modules are incomplete and require the addition of a Sufx Code to specify the required voltage rating. See table below. Flashing base is for use with incandescent lamps. For complete length (extension tube and base), see Page 46-8. Unless Base Mount is specied, an extension tube must be selected for a complete unit. 240V not available for cylindrical LEDs.
CA08102001E
46-5
Assembled Units
Base mountable Incandescent or LED versions 24V and 120V versions Table 46-7. One-Light Unit Stacklight Assembled
Volts AC/DC 24V 24V 24V 24V 24V 24V 120V 120V 120V 120V 120V 120V
Alarm None None None None None None None None None None None None
First Level Color Red Red Green Green Amber Amber Red Red Green Green Amber Amber
Illumination Type Incandescent Steady Cylindrical LED Steady Incandescent Steady Cylindrical LED Steady Incandescent Steady Cylindrical LED Steady Incandescent Steady Cylindrical LED Steady Incandescent Steady Cylindrical LED Steady Incandescent Steady Cylindrical LED Steady
Catalog Number E26XWWL2W-V2 E26XWWLR1W-V2 E26XWWL3W-V2 E26XWWLG1W-V2 E26XWWL9W-V2 E26XWWLA1W-V2 E26XWWL2W-V4 E26XWWLR1W-V4 E26XWWL3W-V4 E26XWWLG1W-V4 E26XWWL9W-V4 E26XWWLA1W-V4
Price U.S. $
LED modules have very low current draw and should not be used with triac output devices like PLC triac output modules. It is recommended that dry contact outputs be used to switch 120V AC modules.
Illumination Type Incandescent Steady Cylindrical LED Steady Incandescent Steady Cylindrical LED Steady
Illumination Type Incandescent Steady Cylindrical LED Steady Incandescent Steady Cylindrical LED Steady
Price U.S. $
46
LED modules have very low current draw and should not be used with triac output devices like PLC triac output modules. It is recommended that dry contact outputs be used to switch 120V AC modules.
Incandescent Steady Amber Cylindrical LED Steady Amber Incandescent Steady Amber Cylindrical LED Steady Amber
Incandescent Steady Red Cylindrical LED Steady Red Incandescent Steady Red Cylindrical LED Steady Red
Incandescent Steady E26XWWL392W-V2 Cylindrical LED Steady E26XWWLG1A1R1W-V2 Incandescent Steady E26XWWL392W-V4 Cylindrical LED Steady E26XWWLG1A1R1W-V4
LED modules have very low current draw and should not be used with triac output devices like PLC triac output modules. It is recommended that dry contact outputs be used to switch 120V AC modules.
Dimensions. . . . . . . . . . . . . . . . . . . . . . . . Page 46-12 Discount Symbol . . . . . . . . . . . . . . . . . . . 1CD1 CA08102001E For more information visit: www.eaton.com
46-6
Components
Light modules include lens diffusers which provide even illumination and eliminate hot spots. Xenon strobes emit a bright attention-getting white ashing light. Flash rate = 60/min. Xenon strobe modules occupy two positions in the Stacklight Assembly.
Light/LED Module Xenon Strobe Module
Table 46-10. Light and Xenon Strobe Modules (Include Lens, Diffusers and Lamps Unless Otherwise Noted)
LED/Lamp Voltage Lens Color Incandescent Steady or Flashing Catalog Number Without Bulb or LED Red Green Yellow Blue Amber Clear Red Green Yellow Blue Amber Clear Red Green Yellow Blue Amber Clear Red Green Yellow Blue Amber Clear Red Green Yellow Blue Amber Clear Red Green Yellow Blue Amber Clear E26B2 E26B3 E26B4 E26B6 E26B9 E26B0 E26B2V1 E26B3V1 E26B4V1 E26B6V1 E26B9V1 E26B0V1 E26B2V2 E26B3V2 E26B4V2 E26B6V2 E26B9V2 E26B0V2 E26B2V3 E26B3V3 E26B4V3 E26B6V3 E26B9V3 E26B0V3 E26B2V4 E26B3V4 E26B4V4 E26B6V4 E26B9V4 E26B0V4 E26B2V5 E26B3V5 E26B4V5 E26B6V5 E26B9V5 E26B0V5 Price U.S. $ Cylindrical LED Steady Only Catalog Number E26BR E26BG E26BY E26BB E26BA E26BW E26BR1V1 E26BG1V1 E26BY1V1 E26BB1V1 E26BA1V1 E26BW1V1 E26BR1V2 E26BG1V2 E26BY1V2 E26BB1V2 E26BA1V2 E26BW1V2 E26BR1V3 E26BG1V3 E26BY1V3 E26BB1V3 E26BA1V3 E26BW1V3 E26BR1V4 E26BG1V4 E26BY1V4 E26BB1V4 E26BA1V4 E26BW1V4 Price U.S. $ Cluster LED Steady Catalog Number E26BR E26BG E26BY E26BB E26BA E26BW E26BRV1 E26BGV1 E26BYV1 E26BBV1 E26BAV1 E26BWV1 E26BRV2 E26BGV2 E26BYV2 E26BBV2 E26BAV2 E26BWV2 E26BRV3 E26BGV3 E26BYV3 E26BBV3 E26BAV3 E26BWV3 E26BRV4 E26BGV4 E26BYV4 E26BBV4 E26BAV4 E26BWV4 E26BRV5 E26BGV5 E26BYV5 E26BBV5 E26BAV5 E26BWV5 Price U.S. $ Flashing Catalog Number E26BR E26BG E26BY E26BB E26BA E26BW E26BEV1 E26BUV1 E26BVV1 E26BKV1 E26BZV1 E26BMV1 E26BEV2 E26BUV2 E26BVV2 E26BKV2 E26BZV2 E26BMV2 E26BEV3 E26BUV3 E26BVV3 E26BKV3 E26BZV3 E26BMV3 E26BEV4 E26BUV4 E26BVV4 E26BKV4 E26BZV4 E26BMV4 E26BEV5 E26BUV5 E26BVV5 E26BKV5 E26BZV5 E26BMV5 Price U.S. $ Xenon Flashing Catalog Number E26BX2V1 E26BX3V1 E26BX4V1 E26BX6V1 E26BX9V1 E26BX0V1 E26BX2V2 E26BX3V2 E26BX4V2 E26BX6V2 E26BX9V2 E26BX0V2 E26BX2V3 E26BX3V3 E26BX4V3 E26BX6V3 E26BX9V3 E26BX0V3 E26BX2V4 E26BX3V4 E26BX4V4 E26BX6V4 E26BX9V4 E26BX0V4 E26BX2V5 E26BX3V5 E26BX4V5 E26BX6V5 E26BX9V5 E26BX0V5 Price U.S. $
12V AC/DC
24V AC/DC
46
48V AC/DC
120V AC
240V AC
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . Page 46-12 Discount Symbol . . . . . . . . . . . . . . . . . . . 1CD1 For more information visit: www.eaton.com CA08102001E
46-7
Components
Price U.S. $
1.75 (44)
2.32 (59)
or
6
C 1 2 3 4 5 6
or
or
5 4 3 or
or
1 2 3 4 5 6
or
7 8
9 10
or
or
or
External Switching Devices Flashing Circuit 7 8 Flashing Orange Module Wire Flashing Base Steady Circuit 9 10
- C
Supply
Flasher Max. Allowable No. of Light Modules 12V DC 2 24V AC/DC 4 48V AC/DC 6 120V AC/DC 6 6 240V AC/DC
46
Standard Base
Bases also suitable for mounting with extension tubes listed on Page 46-8. Mounting gasket and cover are supplied as standard with stacklight bases. Audible alarm units must be wired via the steady circuit on ashing base units. Audible alarm units can be wired in positions as shown but only one unit is permitted on each stack and unit must occupy the last or top mounting position.
E26S109
46-8
Components
12V AC/DC 24V AC/DC 48V AC/DC 120V AC/DC 240V AC/DC 12V AC/DC 24V AC/DC 48V AC/DC 120V AC/DC 240V AC/DC 12V AC/DC 24V AC/DC 48V AC/DC 120V AC/DC 240V AC/DC
E26BQV1 E26BQV2 E26BQV3 E26BQV4 E26BQV5 E26BNV1 E26BNV2 E26BNV3 E26BNV4 E26BNV5 E26BPV1 E26BPV2 E26BPV3 E26BPV4 E26BPV5
1.69 (42.9)
Extension Tubes For use with Standard Mounting Base or 3/4" NPT Threaded Hub Gray Aluminum Extension A in Inches (mm): 0.79 (20) Extension 6.30 (160) Extension 14.17 (360) Extension 29.92 (760) Extension E26BHM E26BJM E26BKM E26BMM A
46
A
Extension Tubes For use with Standard Mounting Base or 3/4" NPT Threaded Hub Black Aluminum Extension A in Inches (mm): 0.79 (20) Extension 6.30 (160) Extension 14.17 (360) Extension 29.92 (760) Extension Right Angle Extension Tube E26BHU E26BJU E26BKU E26BMU E26BRU
2.00 (50.8)
Mounting Dimensions. . . . . . . . . . . . . . . Page 46-11 Discount Symbol . . . . . . . . . . . . . . . . . . . 1CD1 For more information visit: www.eaton.com CA08102001E
46-9
Accessories
Accessories
Table 46-15. Replacement Accessories
Description Replacement Cover Replacement Lens O-Ring Replacement Lenses Notes Normally included with Stacklight Base Normally included with Light Modules Clear Red Green Yellow Blue Amber 12V AC/DC 24V AC/DC 48V AC/DC 120V AC 240V AC White Normally Supplied with Incandescent Light Modules Clear Normally Supplied with LED Light Modules Replacement Lamps 12V 24V 48V 120V 240V Normally included with Extension Tubes Normally included with Stacklight Base For E26 and E22 Incandescent Lamps Diagram Catalog Number 1 2 3 E26S68 E26S106 E26S38 E26S39 E26S40 E26S41 E26S42 E26S43 E26S33 E26S34 E26S35 E26S36 E26S37 E26S31 Price U.S. $
Cover
Alarm
O-Ring
Lens
Replacement Xenon Strobe Dual High (Does not include lenses) Replacement Diffusers
Light Diffuser
Replacement Extension Tube O-Rings Replacement Mounting Gasket Lamp Removal Tool
E26S105
Stacklight Base
46
E22BA3 Mounting Gasket O-Rings Extension Tube
Sold in packages of 5 pieces. Sold in packages of 10 pieces. Mounting gaskets have two sets of mounting holes one set with center-to-center spacing of 1.75 in. (44.5 mm) and another set with center-to-center spacing of 1.65 in. (42 mm). For replacement LEDs, see Table 46-16.
Mounting Base
Panel
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46-10 Discount Symbol . . . . . . . . . . . . . . . . . . . 1CD1 CA08102001E For more information visit: www.eaton.com
46-10
Accessories LEDs
Cluster LED
24V AC/DC
48V AC/DC
46
120V AC/DC
240V AC/DC
46-11
Dimensions
Mounting
Stacklight bases may be mounted without the use of extension tube or mounting base. If additional height is required, choose 0.8 inches to 30 inches (20 760 mm) extension tubes that t between the mounting base and stacklight base. The extension tubes are threaded with 3/4" NPT
Set Screw Recommended Tightening Torque Is 7 in-lb (0.79 Nm)
threads, allowing for direct connection to conduit ttings or threaded holes without the use of a mounting base.
Customer Supplied
Stacklight Base
Stacklight Base
O-Rings (Use Rubber-Jawed Pliers for Installation to Avoid Scratching the Black Anodized Coating)
O-Rings
Stacklight Base
Extension Tube
Extension Tube
Customer Supplied Base Mounting 0.18 (4.6) Dia. or #832 Thread or (M4 x 0.7) 0.87 Dia. (22.1) 0.18 (4.6) Dia. or #832 Thread or (M4 x 0.7) 1.75 (44.5) or 1.65 (42.0) 120 Base Mounting 3-Hole Mounting for E26S108 2.12 (53.8) Dia. 0.20 (5.08) Dia. or #1032 Thread or (M5 x 0.7) 0.87 Dia. (22.1) 3/4 inch (19.1 mm) Conduit Hub for E26S104 Utilizing Extension Tube and Mounting Base 1.92 (48.8) Dia. 0.87 Dia. (22.1) 1.06 Dia. (27) Utilizing Extension Tube and 3/4 inch (19.1 mm) Conduit Hub
46
90
Stacklight base and gasket are supplied as standard with two sets of base mount holes. One set with center-to-center spacing of 1.75 inches (44.5 mm) and another set with center-to-center spacing of 1.65 inches (42 mm).
CA08102001E
46-12
Dimensions
Dimensions
2.56 (65) 2.56 (65) 2.56 (65) 2.24 (57) 0.59 (15) Light Unit Light Unit Alarm 0.59 (15)
2.56 (65)
0.59 (15)
2.72 (69.1)
Standard
2.56 (65)
2.72 (69)
2.72 (69)
0.59 (15)
1.73 (44)
Base
1.73 (44)
Base
1.73 (44)
Base
2.72 (69.1)
Standard
With Alarm
Xenon
2.24 (57)
2.72 (69)
2.72 (69)
Light Unit
46
2.72 (69)
Light Unit
2.72 (69)
Light Unit
2.72 (69)
Light Unit
1.73 (44)
Base
1.73 (44)
Base
1.73 (44)
Base
Standard
With Alarm
2.72 (69)
Light Unit
2.72 (69)
Light Unit
2.72 (69)
Light Unit
2.72 (69)
Light Unit
2.72 (69)
Light Unit
2.72 (69)
Light Unit
1.73 (44)
Base
1.73 (44)
Base
1.73 (44)
Base
Standard
With Alarm
CA08102001E
NOTICE
These les are the same as the last printed version of the catalog dated February 2007. For the most up-to-date information, install the Automatic Tab Updater (ATU) by visiting www.gathermydata.com/install or visit our web site at www.eaton.com/electrical.
Click HERE to Continue