1. PURPOSE ............................................................................................................... 3 2. SECTIONS A & B - CHECKLIST ............................................................................. 3 3. Varified by Approved Contractors Representative .............................................. 3 4. Verified / Approved by BWO Representative ....................................................... 4
Doc. No
Page 3 1. PURPOSE The purpose of this procedure is to provide guidelines that will produce an acceptable film standard when undertaking radiographic inspections of plant and equipment on all BW sites. This procedure applies to both new works, construction , maintenance and repair activities undertaken by the approved BWO Inspection and NDT contractor. 2. SECTIONS A & B - CHECKLIST The following sections A & B is to be completed, signed, dated and stamped by the approved contractor SECTION A Site Location Contractor: Sub-Contractor Module No. Area / Component
Stage of Completion Pre- Fabrication Sub -Assembly Main Assembly Integration
3 Check for sufficient coverage of total weld length
4 Verify film density
5 Verify Image Quality Indicator type & position DIN FE 6 Verify correct film sensitivity
7 Verify availability of acceptance/rejection criteria Follows Contractors RT Procedures 8 Verify radiograph against acceptance criteria
9 Check radiographic report for :
a) Joint reference b) Welder Identification c) Joint thickness & material type d) Radiographic technique e) Recorded sensitivity
3. Verified by Approved Contractors Representative
Accepted Completed by: Date: Rejected Witnessed by: Date: Report Raised N/A Yes Date: Close Out Verified By: Database updated
Doc. No
Page 4
SECTION. B
f) Recorded density g) Recorded IQI type & position DIN FE h) Radiographic source type & size IR 192 j) Radiographic film type & size D4 10 x 24 k) Acceptance/Rejection Criteria ANSI-B31.3 l) Result m) Interpreter name & signature n) Date of interpretation p) Date of radiograph/Date welded Verify storage & retrieval procedure Verify interpreter NDT qualification ASNT PCN CSWIP Level II Pass / Fail Inspectors Comments
4. Verified / Approved by BWO Representative
Accepted Completed by: Date: Rejected Witnessed by: Date: Report Raised N/A Yes Date: Close Out Verified By: