You are on page 1of 30

2013-2014 Microchip Technology Inc.

DS70005147B
PIC32MZ Embedded
Connectivity (EC) Starter Kit
Users Guide
DS70005147B-page 2 2013-2014 Microchip Technology Inc.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyers risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Note the following details of the code protection feature on Microchip devices:
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchips Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as unbreakable.
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchips code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Companys quality system processes and procedures
are for its PIC

MCUs and dsPIC

DSCs, KEELOQ

code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchips quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
QUALITY MANAGEMENT SYSTEM
CERTIFIED BY DNV
== ISO/TS 16949 ==
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,
PICSTART, PIC
32
logo, rfPIC, SST, SST Logo, SuperFlash
and UNI/O are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MTP, SEEVAL and The Embedded Control Solutions
Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
Analog-for-the-Digital Age, Application Maestro, BodyCom,
chipKIT, chipKIT logo, CodeGuard, dsPICDEM,
dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB
Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code
Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit,
PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O,
Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA
and Z-Scale are trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
GestIC and ULPP are registered trademarks of Microchip
Technology Germany II GmbH & Co. KG, a subsidiary of
Microchip Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
2013-2014, Microchip Technology Incorporated, Printed in
the U.S.A., All Rights Reserved.
Printed on recycled paper.
ISBN: 978-1-62077-898-2
PIC32MZ EMBEDDED
CONNECTIVITY (EC)
STARTER KIT USERS GUIDE
2013-2014 Microchip Technology Inc. DS70005147B-page 3
Table of Contents
Preface ........................................................................................................................... 5
Chapter 1. Introduction
1.1 Kit Contents .................................................................................................. 11
1.2 Starter Kit Functionality and Features .......................................................... 12
Chapter 2. Hardware
2.1 Hardware Features ....................................................................................... 15
Appendix A. Schematics
A.1 Block Diagram .............................................................................................. 19
A.2 Schematics .................................................................................................. 20
Appendix B. Bill of Materials
B.1 Starter Kit Bill of Materials ............................................................................ 25
B.2 LAN8740 PHY Daughter Board Bill of Materials .......................................... 27
Worldwide Sales and Service .................................................................................... 30
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 4 2013-2014 Microchip Technology Inc.
NOTES:
PIC32MZ EMBEDDED
CONNECTIVITY (EC)
STARTER KIT USERS GUIDE
2013-2014 Microchip Technology Inc. DS70005147B-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PIC32MZ Embedded Connectivity (EC) Starter Kit. Items discussed in this chapter
include:
Document Layout
Conventions Used in this Guide
Recommended Reading
The Microchip Web Site
Development Systems Customer Change Notification Service
Customer Support
Document Revision History
DOCUMENT LAYOUT
This document describes how to use the PIC32MZ Embedded Connectivity (EC)
Starter Kit (also referred to as starter kit) as a development tool to emulate and debug
firmware on a target board. This users guide is composed of the following chapters:
Chapter 1. Introduction provides a brief overview of the starter kit, highlighting
its features and functionality.
Chapter 2. Hardware provides the hardware descriptions of the starter kit.
Appendix A. Schematics provides a block diagram, board layouts, and
detailed schematics of the starter kit.
Appendix B. Bill of Materials provides the bill of materials for the components
used in the design and manufacture of the starter kit.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a DS number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
DSXXXXXXXXA, where XXXXXXXX is the document number and A is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB

IDE online help.


Select the Help menu, and then Topics to open a list of available online help files.
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 6 2013-2014 Microchip Technology Inc.
CONVENTIONS USED IN THIS GUIDE
This manual uses the following documentation conventions:
DOCUMENTATION CONVENTIONS
Description Represents Examples
Italic characters Referenced books MPLAB IDE Users Guide
Emphasized text ...is the only compiler...
Initial caps A window the Output window
A dialog the Settings dialog
A menu selection select Enable Programmer
Quotes A field name in a window or
dialog
Save project before build
Underlined, italic text with
right angle bracket
A menu path File>Save
Bold characters A dialog button Click OK
A tab Click the Power tab
Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>
Plain Courier New Sample source code #define START
Filenames autoexec.bat
File paths c:\mcc18\h
Keywords _asm, _endasm, static
Command-line options -Opa+, -Opa-
Bit values 0, 1
Constants 0xFF, A
Italic Courier New A variable argument file.o, where file can be any
valid filename
Square brackets [ ] Optional arguments mcc18 [options] file
[options]
Curly brackets and pipe
character: { | }
Choice of mutually exclusive
arguments; an OR selection
errorlevel {0|1}
Ellipses... Replaces repeated text var_name [, var_name...]
Represents code supplied by
user
void main (void)
{ ...
}
Notes A Note presents information
that we want to re-emphasize,
either to help you avoid a
common pitfall or to make you
aware of operating differences
between some device family
members. A Note can be in a
box, or when used in a table
or figure, it is located at the
bottom of the table or figure.
Note 1: This is a note used in a
table.
Note: This is a standard
note box.
CAUTION
This is a caution note.
Preface
2013-2014 Microchip Technology Inc. DS70005147B-page 7
RECOMMENDED READING
This users guide describes how to use the starter kit. The following Microchip
documents are available and recommended as supplemental reference resources.
PIC32MZ Embedded Connectivity (EC) Family Data Sheet (DS60001191)
Refer to this document for detailed information on PIC32MZ EC family devices.
Reference information found in this data sheet includes:
Device memory maps
Device pinout and packaging details
Device electrical specifications
List of peripherals included on the devices
MPLAB

XC32 C/C++ Compiler Users Guide (DS50001686)


This document details the use of Microchips MPLAB XC32 C/C++ Compiler to develop
an application.
MPLAB

X IDE Users Guide (DS50002027)


Refer to this document for more information pertaining to the installation and
implementation of the MPLAB X IDE software, as well as the MPLAB SIM Simulator
software that is included with it.
Universal Serial Bus Specification and Associated Documents
The Universal Serial Bus is defined by the USB 2.0 specification and its associated
supplements and class-specific documents. These documents are available from the
USB Implementers Forum. See their web site at: http://www.usb.org
THE MICROCHIP WEB SITE
Microchip provides online support via our web site at http://www.microchip.com. This
web site makes files and information easily available to customers. Accessible by most
Internet browsers, the web site contains the following information:
Product Support Data sheets and errata, application notes and sample
programs, design resources, users guides and hardware support documents,
latest software releases and archived software
General Technical Support Frequently Asked Questions (FAQs), technical
support requests, online discussion groups, Microchip consultant program
member listings
Business of Microchip Product selector and ordering guides, latest Microchip
press releases, listings of seminars and events; and listings of Microchip sales
offices, distributors and factory representatives
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 8 2013-2014 Microchip Technology Inc.
DEVELOPMENT SYSTEMS CUSTOMER CHANGE NOTIFICATION SERVICE
Microchips customer notification service helps keep customers current on Microchip
products. Subscribers will receive e-mail notification whenever there are changes,
updates, revisions or errata related to a specified product family or development tool of
interest.
To register, access the Microchip web site at www.microchip.com, click on Customer
Change Notification and follow the registration instructions.
The Development Systems product group categories are:
Compilers The latest information on Microchip C compilers and other language
tools
Emulators The latest information on the Microchip in-circuit emulator, MPLAB
REAL ICE
In-Circuit Debuggers The latest information on the Microchip in-circuit
debugger, MPLAB ICD 3
MPLAB X IDE The latest information on Microchip MPLAB X IDE, the
Windows

Integrated Development Environment for development systems tools


Programmers The latest information on Microchip programmers including the
PICkit 3 development programmer
CUSTOMER SUPPORT
Users of Microchip products can receive assistance through several channels:
Distributor or Representative
Local Sales Office
Field Application Engineer (FAE)
Technical Support
Customers should contact their distributor, representative or field application engineer
(FAE) for support. Local sales offices are also available to help customers. A listing of
sales offices and locations is included in the back of this document.
Technical support is available through the web site at: http://support.microchip.com
Preface
2013-2014 Microchip Technology Inc. DS70005147B-page 9
DOCUMENT REVISION HISTORY
Revision A (November 2013)
This is the initial release of this document.
Revision B (February 2014)
The following sections were updated to reflect the LAN8740 PHY Daughter Board,
which is included in the starter kit:
1.1 Kit Contents
1.2 Starter Kit Functionality and Features
2.1.9 Ethernet PHY
Appendix A. Schematics
Appendix B. Bill of Materials
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 10 2013-2014 Microchip Technology Inc.
NOTES:
PIC32MZ EMBEDDED
CONNECTIVITY (EC)
STARTER KIT USERS GUIDE
2013-2014 Microchip Technology Inc. DS70005147B-page 11
Chapter 1. Introduction
Thank you for purchasing a Microchip Technology PIC32MZ Embedded Connectivity
(EC) Starter Kit. This starter kit provides a low-cost, modular development system for
Microchips line of 32-bit microcontrollers.
Two versions of the starter kit are available:
PIC32MZ Embedded Connectivity Starter Kit (DM320006)
PIC32MZ Embedded Connectivity Starter Kit w/Crypto Engine (DM320006-C)
Both versions of the starter kit are preloaded with demonstration software that can be
used to explore the new features of the PIC32MZ EC family of devices. It is also
expandable through a modular expansion interface, which allows the user to extend its
functionality. The starter kit also supplies on-board circuitry for full debug and
programming capabilities.
This chapter covers the following topics:
Kit Contents
Starter Kit Functionality and Features
The preprogrammed example code on the PIC32MZ EC family MCU is available for
download from the Microchip web site at http://www.microchip.com. All project files
have been included so that the code may be used directly to restore the PIC32MZ EC
family MCU on the starter kit to its original state (i.e., if the sample device has been
reprogrammed with another program) or so you can use the tutorial code as a platform
for further experimentation.
1.1 KIT CONTENTS
The PIC32MZ Embedded Connectivity (EC) Starter Kit contains the following items:
PIC32MZ Embedded Connectivity (EC) Starter Kit Development Board
LAN8740 Ethernet PHY Daughter Board
USB mini-B to full-sized A cable USB debug cable to debug and power the
Development Board
USB micro-B to full-sized A cable PIC32 USB cable to communicate with the
PIC32 USB port
RJ-45 CAT5 Ethernet patch cable Ethernet CAT5 cable to communicate with the
PIC32 Ethernet port
Note: If you are missing any part of a kit, contact a Microchip sales office for
assistance. A list of Microchip offices for sales and service is provided on
the back page of this document.
Introduction
2013-2014 Microchip Technology Inc. DS70005147B-page 12
1.2 STARTER KIT FUNCTIONALITY AND FEATURES
1.2.1 Development Board
Representations of the layout of the development board included in the PIC32MZ
Embedded Connectivity (EC) Starter Kit are shown in Figure 1-1 and Figure 1-2.
The top assembly of the board includes these key features, as indicated in Figure 1-1:
1. PIC32MZ2048ECH144-I/PH or PIC32MZ2048ECM144-I/PH (Crypto Engine)
32-bit microcontroller.
2. Green power indicator LED.
3. On-board crystal or oscillator for precision microcontroller clocking (24 MHz).
4. USB connectivity for on-board debugger communications.
5. Green debug indicator LED.
6. Three push button switches for user-defined inputs.
7. Three user-defined indicator LEDs.
8. USB Type A receptacle connectivity for PIC32 host-based applications.
9. HOST mode power jumper.
10. Daughter board connectors for flexible Ethernet PHY options.
11. 32 kHz oscillator for RTCC and Timer1 (optional).
12. External 4 GB SQI memory for expanded memory applications.
13. Jumper for using or disconnecting the on-board debugger.
For more information on key features, refer to Chapter 2. Hardware.
FIGURE 1-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (TOP VIEW)
Note: When running self-powered USB device applications, open the jumper JP1
to prevent possibly back-feeding voltage onto the VBUS from one port on
the host to another (or from one host to another).
4
5
6
1
3
10
2
9
8
11
7
6
6
7
7
12
13
Introduction
2013-2014 Microchip Technology Inc. DS70005147B-page 13
The bottom assembly of the board includes these key features, as indicated in
Figure 1-2:
1. PIC24FJ256GB106 USB microcontroller for on-board debugging.
2. Regulated +3.3V power supply for powering the starter kit through USB or
expansion board.
3. Connector for various expansion boards.
4. USB Type micro-AB receptacle for OTG and USB device connectivity for PIC32
OTG/device-based applications.
5. 50 MHz Ethernet PHY oscillator.
6. USB Host and OTG power supply for powering PIC32 USB applications.
FIGURE 1-2: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT LAYOUT (BOTTOM
VIEW)
3
1
4
6
2
5
Introduction
2013-2014 Microchip Technology Inc. DS70005147B-page 14
1.2.2 LAN8740 PHY Daughter Board
Representation of the layout of the daughter board included in the PIC32MZ
Embedded Connectivity (EC) Starter Kit is shown in Figure 1-3 and Figure 1-4.
FIGURE 1-3: DAUGHTER BOARD LAYOUT (TOP VIEW)
FIGURE 1-4: DAUGHTER BOARD LAYOUT (BOTTOM VIEW)
PIC32MZ EMBEDDED
CONNECTIVITY (EC)
STARTER KIT USERS GUIDE
2013-2014 Microchip Technology Inc. DS70005147B-page 15
Chapter 2. Hardware
This chapter describes the hardware features of the PIC32MZ Embedded Connectivity
(EC) Starter Kit.
2.1 HARDWARE FEATURES
The following key features of the starter kit are presented in the order given in
Section 1.2 Starter Kit Functionality and Features. Refer to Figure 1-1 for their
locations on the development board.
2.1.1 Processor Support
Depending on the starter kit purchased, the development board is designed with a
permanently mounted (i.e., soldered) processor, which is either the
PIC32MZ2048ECM144 (Crypto Engine) or the PIC32MZ2048ECH144.
2.1.2 Power Supply
There are two ways to supply power to the starter kit:
USB bus power connected to USB debug connector J1
An external application board with a regulated DC power supply that provides +5V
can be connected to the J2 application board connector that is provided on the
bottom side of the board
One green LED (D3) is provided to indicate the PIC32 device is powered up.
2.1.3 Debug USB Connectivity
The starter kit includes a PIC24FJ256GB106 USB microcontroller that provides debug-
ger connectivity over USB. The PIC24FJ256GB106 is hard-wired to the PIC32 device
to provide protocol translation through the I/O pins of the PIC24FJ256GB106 to the
ICSP pins of the PIC32 device.
If MPLAB

REAL ICE or MPLAB ICD 3 is used with the starter kit, disconnect the on-
board debugger from the PIC32 device by removing the jumper JP2. When the
on-board debugger is required, replace the jumper JP2. When the jumper JP2 is
installed, pin 1 must be connected to pin 3 and pin 2 must be connected to pin 4.
2.1.4 PIC32 USB Connectivity
There are three possible ways to connect to the PIC32 USB microcontroller:
HOST Mode Connect the device to the Type A connector J4, which is located on
the top of the starter kit. If using the Debug USB port to power the Host port, install
the jumper JP1 to short the back-power prevention diode. Note that a maximum of
~400 mA can be supplied from the Debug USB port to the Host port using this
method. If the full 500 mA supply is needed, an external supply must be con-
nected to the application board and jumper JP1 must be removed to prevent
back-powering the Debug USB port.
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 16 2013-2014 Microchip Technology Inc.
DEVICE Mode Connect the debug mini-B USB cable to port J1 and then
connect the starter kit to the host by using a cable with a Type-B micro-connector
to the starter kits micro-A/B port J5, which is located on the bottom of the board.
The other end of the cable must have a Type-A connector. Connect the Type-A
connector to a USB host. Jumper JP1 should be removed.
OTG Mode Connect the starter kit to the OTG device using an OTG micro-A/B
cable to the micro-A/B port J5, which is located on the bottom side of the board.
The starter kit provides an on-board power supply capable of providing 120 mA
Max. This supply is controlled by the PIC32MZ2048ECH144 device. Jumper JP1
should be removed.
2.1.5 Switches
Push button switches provide the following functionality:
SW1: Active-low switch connected to RB12
SW2: Active-low switch connected to RB13
SW3: Active-low switch connected to RB14
The switches do not have any debounce circuitry and require internal pull-up resistors;
this enables the user to investigate software debounce techniques. When Idle, the
switches are pulled high (+3.3V), and they are grounded when pressed.
2.1.6 LEDs
The RH0 through RH2 LEDs are connected to PORTH of the processor. The PORTH
pins are set high to light the LEDs.
2.1.7 Oscillator Options
A 24 MHz oscillator circuit (Y4) is connected to the on-board microcontroller. This
oscillator circuit functions as the controllers primary oscillator. Depending on which is
populated on the starter kit board, a 24 MHz crystal (Y1) may be used instead of Y4.
Use of an external crystal is required to develop USB applications. The USB specification
dictates a frequency tolerance of 0.25% for high speed. Non-USB applications can use
the internal oscillators.
The starter kit also has provisions for an external secondary 32 kHz oscillator (Y2);
however, this is not populated. A suitable oscillator, the ECS-3X8, can be obtained from
Digi-Key: P/N - X801-ND CMR200TB32.768KDZFTR.
The PIC24FJ256GB106 is independently clocked and has its own 12 MHz crystal.
2.1.8 168-pin Modular Expansion Connector
The PIC32MZ Embedded Connectivity (EC) Starter Kit is designed with a 168-pin
modular expansion interface, which allows the board to provide basic generic func-
tionality and easy extendability to new technologies as they become available.
TABLE 2-1: STARTER KIT CONNECTOR PART NUMBERS
Connector HIROSE Electric PN
Starter Kit Connector FX10A-168P-SV1(71)
Application Board Connector FX10A-168S-SV
Hardware
2013-2014 Microchip Technology Inc. DS70005147B-page 17
2.1.9 Ethernet PHY
The Microchip LAN8740 PHY Daughter Board is populated with a low-power, small-
footprint, 10/100 Fast Ethernet LAN8740 PHY, which features Energy Efficient Ethernet
(IEEE 802.3az) and Wake-on-LAN functionality. This daughter board is designed for
easy development of RMII Ethernet control applications when it is connected into a
compatible PIC32 starter kit.
To use a different Ethernet PHY other than what is offered, visit the microchipDIRECT
website (www.microchipdirect.com) for the list of alternate options.
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 18 2013-2014 Microchip Technology Inc.
NOTES:
PIC32MZ EMBEDDED
CONNECTIVITY (EC)
STARTER KIT USERS GUIDE
2013-2014 Microchip Technology Inc. DS70005147B-page 19
Appendix A. Schematics
A.1 BLOCK DIAGRAM
FIGURE A-1: HIGH-LEVEL BLOCK DIAGRAM OF THE PIC32MZ EMBEDDED CONNECTIVITY
(EC) STARTER KIT
PIC32MZ2048ECH144
(PIC24FJ256GB106)
ICSP
VUSB3V3
(1)
or
+5V_EXT
Debug USB
A
p
p
l
i
c
a
t
i
o
n

B
o
a
r
d

C
o
n
n
e
c
t
o
r

Switches
LEDs
+5V EXT

USB OTG
USB Host

Device/OTG
(Type micro-A/B)
Host
(Type A)
Note 1: From Debugger USB Port.
+3.3V
Power
Supply

Ethernet
PHY
10/100 Jack
Debugger Circuit
Power Circuit
Daughter
Board
or
PIC32MZ2048ECM144
(w/Crypto Engine)
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 20 2013-2014 Microchip Technology Inc.
A.2 SCHEMATICS
FIGURE A-2: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (PIC32MZ EC FAMILY
DEVICE)
P32_VDD
P32_VDD
4.7K
R1
DNP
RG15
TRD1/SQID1/RG12
TRD2/SQID2/RG14
EBID5/PMD5
EBID6/PMD6
EBID7/PMD7
EBID4/PMD4
EBID3/PMD3
EBID2/PMD2
EBID1/PMD1
EBID10/PMD10
EBIA15/PMCS2/RD9
EBIA16/RK0
EBIWE/PMWR/RC3
SOSCO/RC14
EBID15/PMD15
EBID13/PMD13
EBID12/PMD12
EBID9/PMD9
EBID0/PMD0
EBID11/PMD11
EBID8/PMD8
TRD0/SQID0/RG13
TRD3/SQID3/RA7
TRCLK/SQICLK/RA6
SOSCI/RC13
SQICS0/RPD4/RD4
AN14/C1IND/RPG6/SCK2/RG6
AN4/C1INB/RB4
SDA2/RA3
SCL2/RA2
PGEC1/AN1/RPB1/RB1
PGED1/AN0/RPB0/RB0
RPA15/SDA1/RA15
RPA14/SCL1/RA14
INT0/RD0
RPD1/SCK1/RD1
EBIA13/PMA13/RJ13
EBIA12/PMA12/RC2
EBIA11/PMA11/RB12
EBIA10/PMA10/RB8
EBIA9/PMA9
EBIA5/PMA5/RA5
EBIA7/PMA7
EBIA6/PMA6
EBIA3/PMA3
EBIA2/PMA2/RG9
EBIA1/PMA1
EBIA0/PMA0/RJ15
PGED2/AN47/RPB7/RB7
PGEC2/AN46/RPB6/RB6
ICSP_MCLR_VPP_TARGET
TMS/RA0
TCK/RA1
TDO/RF12
TDI/RF13
VREF-/RA9
VREF+/RA10
D+
D-
ETXD0
ETXD1
ERXERR
ERXD1
ERXD0
EBIA19/RK5
EBIA20/RK6
EMDC
EMDIO
ETXEN
EBIA21/RK7
0.01uF
C20
0.1uF
C1
P32_VDD
0.01uF
C21
0.1uF
C2
0.1uF
C3
P32_VDD
0.1uF
C4
P32_VDD
0.01uF
C24
0.1uF
C5
P32_VDD
0.01uF
C25
0.1uF
C6
P32_VDD
0.01uF
C26
0.1uF
C7
P32_VDD
0.01uF
C27
P32_VDD
0.01uF
C28
EBIA4/PMA4
VBUS
P32_VDD
P32_VDD
EBID14/PMD14
EREF_CLK
ECRS/RH13
EBIA14/PMCS1/PMA14/RA4
EBIA8/PMA8
EBIA18/RK4
RH0
RH1
RH2
AN7/RB12
AN8/RB13
AN3/C2INA/RPB3/RB3
RF3/USBID/RPF3
AN45/C1INA/RPB5/RB5/VBUSON
SCL3/RPF8/RF8
SQICS1/RPD5/RD5
AN32/AETXD0/RPD14/RD14
AN33/RPD15/SCK6/RD15
AN26/RPE9/RE9
AN25/RPE8/RE8
AN6/RB11
AN13/C1INC/RPG7/SDA4/RG7
AN12/C2IND/RPG8/SCL4/RG8
RPD10/SCK4/RD10
EBICS0/RJ4
EBIA17/RK3
EBIBS0/RJ12
EBIBS1/RJ10
SDA3/RPF2/RF2
AN2/C2INB/RPB2/RB2
AN42/ERXD2/RH6
0.01uF
C22
0.01uF
C23
0.1uF
C8
0.1uF
C9
ERXD3/RH9
ECOL/RH10
EBIRDY2/RH11
EBIA23/RH15
EBIADV/RH14
ECRS/RH12
EBICS2/RJ6/SQI_PWR
EBICS1/RJ5
ETXCLK/RPD7/RD7
EBIA22/RJ3
CVREFOUT/AN5/RPB10/RB10
AN10/RPB15/OCFB/RB15
RH3
AN9/RPB14/SCK3/RB14
EBIRDY3/RJ2
ETXERR/RJ0
EBICS3/RJ7
C47
DNP
EBIOE/PMRD/RC4
EBIRDY2/RH11
84
ERXD0/RH8
81
RPF3/USBID/RF3
78
EMDC/AEMDC/RPD11/RD11
99
RPA15/SDA1/RA15
96
EBIA19/RK5
93
EBIA9/RPF4/SDA5/PMA9/RF4
90
EBIA14/PMCS1/PMA14/RA4
87
AN25/RPE8/RE8
23
MCLR
20
VSS
17
AN14/C1IND/RPG6/SCK2/RG6
14
EBIA12/AN21/RPC2/PMA12/RC2
11
AN36/ETXD1/RJ9
8
EBID7/AN15/PMD7/RE7
5
EBIA5/AN34/PMA5/RA5
2
VUSB3V3
74
AN26/RPE9/RE9
24
AN45/C1INA/RPB5/RB5
25
EBIA2/AN11/C2INC/RPG9/PMA2/RG9
21
VDD
18
TMS/AN24/RA0
22
EBIA16/RK0
19
AN13/C1INC/RPG7/SDA4/RG7
15
EBIWE/AN20/RPC3/PMWR/RC3
12
AN12/C2IND/RPG8/SCL4/RG8
16
EBIOE/AN19/RPC4/PMRD/RC4
13
EBIBS0/RJ12
9
EBIA6/AN22/RPC1/PMA6/RC1
6
EBIBS1/RJ10
10
AN35/ETXD0/RJ8
7
EBID5/AN17/RPE5/PMD5/RE5
3
EBID6/AN16/PMD6/RE6
4
AN23/RG15
1
ERXD3/RH9
82
SDA3/RPF2/RF2
79
SCL3/RPF8/RF8
80
VBUS
73
VSS
75
D-
76
ECRS/RH12
100
EBIA15/RPD9/PMCS2/PMA15/RD9
97
RPD10/SCK4/RD10
98
EBIA20/RK6
94
EBIA8/RPF5/SCL5/PMA8/RF5
91
EBIA18/RK4
92
VDD
88
SCL2/RA2
85
EBIRDY1/SDA2/RA3
86
ECOL/RH10
83
D+
77
RPA14/SCL1/RA14
95
VSS
89
AN37/ERXCLK/EREFCLK/RJ11
27
EBIA0/PMA0/RJ15
30
VDD
33
PGED1/AN0/RPB0/RB0
36
VREF-/CVREF-/AN27/RA9
39
AVSS
42
EBIRP/RH2
45
EBIA7/AN49/RPB9/PMA7/RB9
48
AN4/C1INB/RB4
26
EBIA11/PMA11/RJ14
29
EBIA13/PMA13/RJ13
28
VSS
32
PGEC1/AN1/RPB1/RB1
35
AN2/C2INB/RPB2/RB2
34
PGED2/AN47/RPB7/RB7
38
AVDD
41
VREF+/CVREF+/AN28/RA10
40
AN39/ETXD3/RH1
44
EBIA10/AN48/RPB8/PMA10/RB8
47
EBIWP/RH3
46
AN6/RB11
50
AN3/C2INA/RPB3/RB3
31
PGEC2/AN46/RPB6/RB6
37
AN38/ETXD2/RH0
43
CVREFOUT/AN5/RPB10/RB10
49
EBIA17/RK3
53
TCK/AN29/RA1
56
AN7/RB12
59
AN10/RPB15/OCFB/RB15
62
AN40/ERXERR/RH4
65
EBIA4/PMPA4/RH7
68
OSCI/CLKI/RC12
71
EBIA3/PMA3/RK2
52
EBIA1/PMA1/RK1
51
VDD
55
TDO/AN31/RPF12/RF12
58
VSS
54
TDI/AN30/RPF13/SCK5/RF13
57
AN9/RPB14/SCK3/RB14
61
VDD
64
AN8/RB13
60
VSS
63
AN42/ERXD2/RH6
67
AN33/RPD15/SCK6/RD15
70
AN41/ERXD1/RH5
66
AN32/AETXD0/RPD14/RD14
69
OSCO/CLKO/RC15
72
ERXDV/ECRSV/AECRSDV/RH13
101
EBIADVN/RH14
102
EBIA23/RH15
103
RPD0/RTCC/INT0/RD0
104
SOSCI/RPC13/RC13
105
SOSCO/RPC14/T1CK/RC14
106
VDD
107
VSS
108
RPD1/SCK1/RD1
109
EBID14/RPD2/PMD14/RD2
110
EBID15/RPD3/PMD15/RD3
111
EBID12/RPD12/PMD12/RD12
112
EBID13/PMD13/RD13
113
ETXERR/RJ0
114
EMDIO/AEMDIO/RJ1
115
EBIRDY3/RJ2
116
EBIA22/RJ3
117
SQICS0/RPD4/RD4
118
SQICS1/RPD5/RD5
119
ETXEN/RPD6/RD6
120
ETXCLK/RPD7/RD7
121
VDD
122
VSS
123
EBID11/RPF0/PMD11/RF0
124
EBID10/RPF1/PMD10/RF1
125
EBIA21/RK7
126
EBID9/RPG1/PMD9/RG1
127
EBID8/RPG0/PMD8/RG0
128
TRCLK/SQICLK/RA6
129
TRD3/SQID3/RA7
130
EBICS0/RJ4
131
EBICS1/RJ5
132
EBICS2/RJ6
133
EBICS3/RJ7
134
EBID0/PMD0/RE0
135
VSS
136
VDD
137
EBID1/PMD1/RE1
138
TRD2/SQID2/RG14
139
TRD1/SQID1/RG12
140
TRD0/SQID0/RG13
141
EBID2/PMD2/RE2
142
EBID3/RPE3/PMD3/RE3
143
EBID4/AN18/PMD4/RE4
144
U1
PIC32MZ
33R R48
33R R49
33R R50
33R R51
C49
0R R55
DNP
1
2
3
4
5
6
J7
P32_VDD
PGED2/AN47/RPB7/RB7
PGEC2/AN46/RPB6/RB6
ICSP_MCLR_VPP_TARGET
P32_VDD
P32_VDD
TC25L5I32K7680
EN
1
GND
2
OUT
3
VDD
4
Y2
P32_VDD 0.01uF C36
P32_VDD
0.01uF
C29
P32_VDD
24MHz
EN
1
GND
2
OUT
3
VDD
4
Y4
24MHz
Y1
8.0pF
C34
8.0pF
C35
1M
1%
R56
Only Oscillator or Crystal Configuration
should be populated.
Please check PCB/BOM to determine
which configuration is populated
32.768 kHz
Schematics
2013-2014 Microchip Technology Inc. DS70005147B-page 21
FIGURE A-3: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (USB HOST AND OTG
POWER SUPPLIES)
MH1
P32_VDD
ERXD1
ERXD0
ERXERR
EMDIO
EMDC
ETXEN
ETXD0
ETXD1
EREF_CLK
ICSP_MCLR_VPP_TARGET
0.1uF
C19
0R R38
PHY Daughter Board Connections
33R R52
33R R53
R54 DNP
CLK_IN
CLK_IN
EN
1
GND
2
OUT
3
VDD
4
Y5
50MHz
P32_VDD
0.01uF
C48
ECRS/RH13
SLM-112-01-G-S + SLM-103-01-G-S
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
2
5
2
5
J6
2 HDR/MB
SOSCI/RC13
4.7K
R4
1uF
C33
100K
R24
PGOOD
1
Vout
2
Vin
3
GND
4
C-
5
C+
6
SHDN
7
SELECT
8
U5
MCP1253_MSOP
VBUS
P32_VDD
P32_VDD
D+
D-
S
H
I
E
L
D
6
D-
2
5
D+
3
VBUS
1
4
J4
6
D-
2
5
D+
3
VBUS
1
4
J5
TYPE MICRO A/B
D+
D- C46
100uF
+5V_EXT
EN
4
IN
5
GND
2
OC
3
OUT
1
U6
TPS2051B
* Install Jumper if powering
from Debugger Power Supply
USB HOST Power Supply
USB OTG/Device Power Supply (120mA MAX)
+5V_EXT VBUS
D1
MBR0520LT1G
DEVICE/OTG PORT
HOST TYPE - TYPE A
+5V_DUSB
10F
C44
10F
C45
R46
DNP
AN45/C1INA/RPB5/RB5/VBUSON
AN45/C1INA/RPB5/RB5/VBUSON AN2/C2INB/RPB2/RB2
AN2/C2INB/RPB2/RB2
VBUS_DEVICE
RF3/USBID/RPF3
1 2
JP1
D7
GRN
P32_VDD
+3.3V_PKOB
330R
R13
C42
4.7uF
FLAGB
4
OUT
5
GND
2
ON
3
IN
1
U7
FPF2104
TARGET_POWER_ENABLE
100K
R25
100K
R26
VBUS_DEVICE_SWITCHED_SENSE
R47 DNP
Current Limiting Switch
P
I
C
3
2
M
Z

E
m
b
e
d
d
e
d

C
o
n
n
e
c
t
i
v
i
t
y

(
E
C
)

S
t
a
r
t
e
r

K
i
t

U
s
e
r

s

G
u
i
d
e
D
S
7
0
0
0
5
1
4
7
B
-
p
a
g
e

2
2


2
0
1
3
-
2
0
1
4

M
i
c
r
o
c
h
i
p

T
e
c
h
n
o
l
o
g
y

I
n
c
.
FIGURE A-4: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (DEBUGGER)
+3.3V_PKOB
+3.3V_PKOB
+3.3V_PKOB
+3.3V_PKOB
(Local VDD/VSS bypass/decoupling)
+3.3V_PKOB
+3.3V_PKOB
+3.3V_PKOB
+3.3V_PKOB
+3.3V_PKOB
+3.3V_PKOB
SERIAL EEPROM (25LC256)
ASSEMBLY_ID_0
ASSEMBLY_ID_1
ICSP_MCLR_VPP_PICKIT3
ICSP_MCLR_VPP_PICKIT3
POWER_GOOD_PICKIT3
SCK
SDI
SDO
UTIL_CS
UTIL_CS
UTIL_WP
UTIL_WP
USB_D-
USB_D+
UTIL_SCK
UTIL_SCK
UTIL_SDI
UTIL_SDI UTIL_SDO
UTIL_SDO
VBUS_DEVICE
VDD_SENSE
VPP_GND
VPP_ON
VPP_SENSE
VREF_2.5V
GND
+3.3V_PKOB
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
PGC__PKOB
PGD_PKOB
PGC__PKOB
PGD_PKOB
TARGET ICSP SIGNALS
SCK
SDI
SDO
GND
GND
ICSP_MCLR_VPP_TARGET
VDD_SENSE
VPP_GND
VPP_ON
VPP_SENSE
GND
GND
USB_D-
USB_D+
GND
GND
+3.3V_PKOB
POWER_GOOD_PICKIT3
GND
VBUS_DEVICE
POWER DISTRIBUTION/SWITCHING
USB INTERFACE
(BUS POWERED)
GND
+3.3V_PKOB
EGND
10K
R14
10K
R15
10K
R19
10K
R16
10K
R20
10K
R22
10K
R21
10K
R18
R39 0R
4.7K
R2
4.7K
R3
330R
R8
330R
R9
330R
R10
330R
R11
330R
R12
2.21K
R32
2.21K
R30
2.21K
R31
2.2uF
C40
2.2uF
C41
0.1uF
C11
0.1uF
C12
0.1uF
C14
0.1uF
C15
0.1uF
C16
0.1uF
C17
0.01uF
C30
1uF
C32
0.1uF
C10
C38
8pF
C39
8pF
10F
C43
200K
R29
200K
R28
100R
R35
1uF
C31
R42 0R
R33
3.92K 100K
R27
R37
3.16K
R45
DNP
R44
DNP
R43
DNP
R36
100R
2.2K
1206 1/4W
1K
R34
4
1
3
2 Y3
12.0MHz
D6
GRN
SCK
6
SI
5
CS
1
WP
3
V
S
S
4
SO
2
V
C
C
8
HOLD
7
U4
25LC256-I/ST
D2
MBR0520LT1G
D+
3
D-
2
GND
5
ID
4
6 7 8 9
VUSB
1
, , ,
J3
UX60-MB-5ST
+3.3V_PKOB
1
2
3
4
5
6
J2
A
N
6
/R
B
6
1
7
P
M
P
D
4
/R
E
4
6
4
A
V
S
S
2
0
P
M
P
D
1
/R
E
1
6
1
P
M
A
1
3
/A
N
1
0
/R
B
1
0
2
3
R
F
0
5
8
V
D
D
2
6
R
D
7
5
5
P
M
A
1
/A
N
1
4
/R
B
1
4
2
9
P
M
W
R
/R
D
4
5
2
P
M
A
8
/S
C
L
2
/R
F
5
3
2
V
C
P
C
O
N
/R
D
1
4
9
AN0/RB0
16
AN3/RB3
13
VDD
10
MCLR
7
PMA5/RG6
4
PMD5/RE5
1
USBID/RF3
33
D-/RG3
36
OSC1/CLKIN/RC12
39
RTCC/RD8
42
PMCS1/RD11
45
SOSCO/RC14
48
AN2/RB2
14
AN1/RB1
15
PMA2/RG9
8
VSS
9
AN5/RB5
11
PMD6/SCL3/RE6
2
PMD7/SDA3/RE7
3
PMA4/RG7
5
A
N
7
/R
B
7
1
8
A
V
D
D
1
9
A
N
8
/R
B
8
2
1
P
M
P
D
3
/R
E
3
6
3
P
M
P
D
2
/R
E
2
6
2
P
M
P
D
0
/R
E
0
6
0
P
M
A
1
2
/A
N
1
1
/R
B
1
1
2
4
V
S
S
2
5
P
M
A
1
1
/A
N
1
2
/R
B
1
2
2
7
E
N
V
R
E
G
5
7
V
c
a
p
/V
D
D
C
O
R
E
5
6
R
D
6
5
4
P
M
A
0
/A
N
1
5
/R
B
1
5
3
0
P
M
A
9
/S
D
A
2
/R
F
4
3
1
P
M
B
E
/R
D
3
5
1
D
H
P
/R
D
2
5
0
Vusb
35
Vbus
34
VSS
41
OSC2/CLKO/RC15
40
VDD
38
SOSCI/RC13
47
INT0/RD0
46
SCL1/PMCS2/RD10
44
USBOENAN4/RB4
12
PMA3/RG8
6
D+/RG2
37
SDA1/RD9
43
P
M
A
7
/A
N
9
/R
B
9
2
2
R
F
1
5
9
P
M
A
1
0
/A
N
1
3
/R
B
1
3
2
8
P
M
R
D
/R
D
5
5
3
U2
PIC24FJ256GB106
G
N
D
_
E
P
9
GND
4
VIN
1
PWRGD
5
VOUT
8
VIN
2
SHDN
3
SENSE
7
CDELAY
6
U3
MCP1727-3302E/MF
+3.3V_PKOB
GND
10K
R17
+5V_DUSB
MMBT3904-TP
Q2
MMBT3904-TP
Q3
MMBT3906-TP
Q1
VBUS_DEVICE_SWITCHED_SENSE
TARGET_POWER_ENABLE
0.1uF
C13
PGEC2/AN46/RPB6/RB6
PGED2/AN47/RPB7/RB7
PKOB Mode REAL ICE Mode
pins 1-3: Shorted pins 1-3: Open
pins 2-4: Shorted pins 2-4: Open
JP2 Jumper Positions
1 3
2 4
JP2
Schematics
2013-2014 Microchip Technology Inc. DS70005147B-page 23
FIGURE A-5: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT (APPLICATION
BOARD CONNECTOR, SQI MEMORY AND POWER, LEDS, AND SWITCHES)
117 118
111 112
105 106
99 100
93 94
87 88
81 82
75 76
69 70
57 58
51 52
45 46
39 40
33 34
27 28
21 22
15 16
9 10
3 4
119 120
107 108
109 110
113 114
115 116
95 96
97 98
101 102
103 104
83 84
85 86
89 90
91 92
71 72
73 74
77 78
79 80
59 60
61 62
65 66
67 68
47 48
49 50
53 54
55 56
35 36
37 38
41 42
43 44
25 26
29 30
23 24
19 20
13 14
17 18
11 12
7 8
1 2
5 6
31 32
63 64
121 122
123 124
125 126
127 128
129 130
135 136
137 138
131 132
133 134
139 140
141 142
143 144
145
148
149 150
151 152
153 154
159 160
161 162
155 156
157 158
163 164
165 166
167 168
146
147
J1
F
X
1
0
A
-
1
6
8
P
-
S
V
1
(
7
1
)
RG15
P32_VDD
TRD2/SQID2/RG14
EBID5/PMD5
EBID4/PMD4
EBID3/PMD3
EBID2/PMD2
EBID1/PMD1
INT0/RD0
EBIA6/PMA6
EBIA4/PMA4
EBIA3/PMA3
EBIA2/PMA2/RG9
EBIA1/PMA1
EBIA0/PMA0/RJ15
AN4/C1INB/RB4
EBIA5/PMA5/RA5
AN3/C2INA/RPB3/RB3
AN45/C1INA/RPB5/RB5/VBUSON
AN33/RPD15/SCK6/RD15
AN25/RPE8/RE8
EBIA17/RK3
EBIA18/RK4
AN26/RPE9/RE9
EBIA19/RK5
EBIA20/RK6
EBIA21/RK7
EBIA23/RH15
EBIADV/RH14
EBICS1/RJ5
PGEC1/AN1/RPB1/RB1
AN2/C2INB/RPB2/RB2
AN14/C1IND/RPG6/SCK2/RG6
RPD10/SCK4/RD10
+5V_EXT
ICSP_MCLR_VPP_TARGET
TMS/RA0
TCK/RA1 TDO/RF12
TDI/RF13
VREF-/RA9
VREF+/RA10
SDA2/RA3
SCL2/RA2
EBIWE/PMWR/RC3
EBID15/PMD15
EBID14/PMD14
EBID13/PMD13
EBID12/PMD12
EBID9/PMD9
EBID10/PMD10
EBID11/PMD11
TRD0/SQID0/RG13
TRD1/SQID1/RG12
TRCLK/SQICLK/RA6
SOSCO/RC14
SOSCI/RC13
SQICS1/RPD5/RD5
EBIA16/RK0
AN42/ERXD2/RH6
AN6/RB11
RH0
RH1
ERXD3/RH9
ECOL/RH10
EBIRDY2/RH11
ETXCLK/RPD7/RD7
CVREFOUT/AN5/RPB10/RB10
SQICS0/RPD4/RD4
RPD1/SCK1/RD1
SCL3/RPF8/RF8
SDA3/RPF2/RF2
AN10/RPB15/OCFB/RB15
EBIRDY3/RJ2
RH3
PGED1/AN0/RPB0/RB0
AN7/RB12
AN9/RPB14/SCK3/RB14
P32_VDD P32_VDD
P32_VDD
+5V_EXT
P32_VDD
P32_VDD P32_VDD
P32_VDD
+5V_EXT +5V_EXT
EBID15/PMD15
EBID4/PMD4
EBIA14/PMCS1/PMA14/RA4
EBIA15/PMCS2/RD9
EBIA13/PMA13/RJ13
EBIA12/PMA12/RC2
EBIA11/PMA11/RB12
EBIA10/PMA10/RB8
EBIA9/PMA9
EBIA8/PMA8
EBIA7/PMA7
AN8/RB13
ETXERR/RJ0
EBIBS0/RJ12
EBIBS1/RJ10
EBIA22/RJ3
EBICS0/RJ4
DEBUG
MCLR
SOSC
E
B
I

A
D
D
R
E
S
S
INTO
JTAG
E
B
I

A
D
D
R
E
S
S
E
B
I

A
D
D
R
E
S
S
E
B
I

C
O
N
T
DEBUG
JTAG
T
R
A
C
E
E
B
I

D
A
T
A
E
B
I

C
O
N
T
R
O
L
E
B
I

D
A
T
A
E
B
I

C
O
N
T
R
O
L
CE#
1
SO/SIO1
2
SIO2
3
VSS
4
SI/SIO0
5
SCK
6
SIO3
7
VDD
8
U9
SST26VF032
0.1uF
C18
SQI_VDD
SQICS1/RPD5/RD5
TRCLK/SQICLK/RA6 TRD2/SQID2/RG14
TRD3/SQID3/RA7
TRD0/SQID0/RG13
TRD1/SQID1/RG12
330R
R5
330R
R7
330R
R6
Green D5
LED2
Red D3
LED1
Yellow
D4
LED3
USER LEDS'
S1
S2
S3
GND
USERSSWITCH'
RH0
RH1
RH2
AN7/RB12
AN8/RB13
AN9/RPB14/SCK3/RB14
10K
R23
SQI_VDD
P32_VDD
EBICS2/RJ6/SQI_PWR
EBICS3/RJ7
EBICS2/RJ6/SQI_PWR
EBID0/PMD0
EBID6/PMD6
RH2
EBIOE/PMRD/RC4
RPA15/SDA1/RA15
RPA14/SCL1/RA14
RF3/USBID/RPF3
PGEC2/AN46/RPB6/RB6
PGED2/AN47/RPB7/RB7
AN13/C1INC/RPG7/SDA4/RG7
AN12/C2IND/RPG8/SCL4/RG8
G
P
I
O
L
C
D
R
G
B
G
P
I
O
/
P
P
S
A
D
C
G
P
I
O
L
C
D
R
G
B
G
P
I
O
/
P
P
S
I
2
C
EBID15/PMD15
EBID15/PMD15
EBID7/PMD7
EBID8/PMD8
EBID10/PMD10
EBID10/PMD10
EBID4/PMD4
EBID4/PMD4
TRD3/SQID3/RA7
AN45/C1INA/RPB5/RB5/VBUSON
AN32/AETXD0/RPD14/RD14
G
S
D
Q5
ECRS/RH12
AN9/RPB14/SCK3/RB14
AN12/C2IND/RPG8/SCL4/RG8
AN14/C1IND/RPG6/SCK2/RG6 ETXCLK/RPD7/RD7
P
I
C
3
2
M
Z

E
m
b
e
d
d
e
d

C
o
n
n
e
c
t
i
v
i
t
y

(
E
C
)

S
t
a
r
t
e
r

K
i
t

U
s
e
r

s

G
u
i
d
e
D
S
7
0
0
0
5
1
4
7
B
-
p
a
g
e

2
4


2
0
1
3
-
2
0
1
4

M
i
c
r
o
c
h
i
p

T
e
c
h
n
o
l
o
g
y

I
n
c
.
FIGURE A-6: LAN8740 PHY DAUGHTER BOARD SCHEMATICS
RXD1
RXD0
RX_ER
MDIO
MDC
TX_EN
TXD0
TXD1
CRS_DV
nRST
+3.3V
CLK_IN
0.1uF
C6
nINT
GND
V
D
D
2
A
1
LED2/nINT/nPME/nINTSEL
2
LED1/nINT/nPME/REGOFF
3
XTAL2
4
XTAL1/CLKIN
5
V
D
D
C
R
6
RXCLK/PHYAD1
7
RXD3/PHYAD2
8
RXD2/nPME/RMIISEL
9
RXD1/MODE1
10
RXD0/MODE0
11
V
D
D
I
O
1
2
RXER/RXD4/PHYAD0
13
CRS
14
COL/CRS_DV/MODE2
15
MDIO
16
MDC
17
nINT/TXER/TXD4
18
nRST
19
TXCLK
20
TXEN
21
TXD0
22
TXD1
23
TXD2
24
TXD3
25
RXDV
26
V
D
D
1
A
2
7
TXN
28
TXP
29
RXN
30
RXP
31
RBIAS
32
P
A
D
3
3
V
D
D
2
A
LED2/nINT/nPME/nINTSEL
LED1/nINT/nPME/REGOFF
XTAL2
XTAL1/CLKIN
V
D
D
C
R
RXCLK/ KK PHYAD1
RXD3/PHYAD2
RXD2/nPME/RMIISEL
RXD1/MODE1
RXD0/MODE0
V
D
D
I
O
RXER/RXD4/PHYAD0
CRS
COL/CRS_DV/MODE2
MDIO
MDC
nINT/TXER/TXD4
nRST
TXCLK
TXEN
TXD0
TXD1
TXD2
TXD3
RXDV
V
D
D
1
A
TXN XX
TXP
RXN XX
RXP
RBIAS
P
A
D
U1
*SMSC LAN8740
RXD1
RXD0
RX_ER
MDIO
MDC
TX_EN
TXD0
TXD1
CRS_DV
nRST
CLK_IN nINT
GND
GND
LED_ACT
TXP
TXN
RXP
RXN
LED_LINK
4
9
.
9
R
R17
4
9
.
9
R
R18
4
9
.
9
R
R19
4
9
.
9
R
R20
249R
1%
R21
249R
1%
R22
12pF
C10
GND
12pF
C10 00
GN GG D
12pF
C11
12pF
C12
12pF
C13
For EMI Purposes
(DNP)
VDDA
0.022uF
C14
0R
R23
EGND
EGND
GND EGND
EGN GG D
EGN GG D
Create EGND copper pour
around RJ-45 Conn
VDDA
J3011G21DNL
2
12
8
4
11
1
7
6
NC
9
10
3
5
SHIELD
14
SHIELD
13
J7
J6
J4
J3
J1
J5
J8
J2
4
X
7
5

Yel
Grn
1000pF 2KV
J2
TXN
TXP
RXP
RXN
TX_P
TX_N
RX_N
RX_P
LED_ACT
LED_LINK
12.1k
1%
R15
GND
GND
GND GND
1.0uF
C3
1.0uF
C7
0.1uF
C4
0.1uF
C5
FB1
VDDA +3.3V
1.0uF
C1
GND
0.1uF
C2
+3.3V
10K
R5
10K
R16
+3.3V
1.5K
R7
1%
4.7K
R1
1%
4.7K
R2
1%
4.7K
R3
1%
4.7K
R1
1%
4.7K
R2
1%
4.7K
R3
MODE[2:0] = 111
Default
+3.3V +3.3V
10K
R5
RMII
EN
1%
4.7K
R6
1%
4.7K
R4
1%
4.7K
R8
GND
1%
4.7K
R6
1%%
4.7K
R4
1%
4.7K
R8
GN GG D
PHYAD[2:0] = 000
Default
GN GG D
LED__LIN _ K
249R
1%
R22
REGOFF=0
(Regulator ON)
GND
1.0uF
C8
470pF
C9
GND
CLK_IN
33R
1%
R12
33R
1%
R13
33R
1%
R14
33R
1%
R11
33R
1%
R12
33R
1%
R13
33R
1%
R11
Place close to U1
1
2
3
4
5
6
7
8
9
10
11
12
13
15
16
17
18
19
20
21
22
23
24
14
S9014E-12-ND
E
G
N
D
2
5
E
G
N
D
2
5
J1
2 HDR/DB
EGND
PIC32MZ EMBEDDED
CONNECTIVITY (EC)
STARTER KIT USERS GUIDE
2013-2014 Microchip Technology Inc. DS70005147B-page 25
Appendix B. Bill of Materials
B.1 STARTER KIT BILL OF MATERIALS
TABLE B-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS
Reference Description Manufacturer Part No.
C1, C2, C3, C4,
C5, C6, C7, C8,
C9, C10, C11,
C12, C13, C14,
C15, C16, C17,
C18, C19
CAP CER .10 F 50V X7R 0603 TDK Corporation C1608X7R1H104M
C20, C21, C22,
C23, C24, C25,
C26, C27, C28,
C29, C30, C48
CAP CER 10000 pF 50V X7R 0603 TDK Corporation C1608X7R1H103M
C31, C32, C33 CAP CER 1.0 F 16V X5R 10% 0603 TDK Corporation C1608X5R1C105K
C38, C39 CAP CER 8 pF 50V NP0 0603 Murata GRM1885C1H8R0DZ01D
C40, C41 CAP CER 2.2 F 16V X5R 0603 TDK Corporation C1608X5R1C225K
C42 CAP CER 4.7 F 6.3V 10% X5R 0603 Taiyo Yuden JMK107BJ475KA-T
C43, C44, C45 CAP CER 10 F 16V Y5V 0805 Murata GRM21BF51C106ZE15L
C46 CAP CER 100 F 6.3V Y5V 1206 Murata GRM31CF50J107ZE01L
D1, D2 DIODE SCHOTTKY 20V 0.5A SOD123 ON Semiconductor MBR0520LT1G
D3 LED, SMD, RED, 0603 package Kingbright Corp APT1608EC
D4 LED, SMD, YEL, 0603 package Kingbright Corp APT1608YC
D5, D6, D7 LED, SMD, GRN, 0603 package Kingbright Corp APT1608SGC
J1 Hirose FX10_ 168-pin Header Hirose Electric Co Ltd FX10A-168P-SV1(71)
J7 CONN HEADER .050" 6 POS PCB GOLD Samtec TMS-106-01-G-S
J3 CONN RECEPT MINI USB 2.0 5 POS Hirose Electric Co Ltd UX60-MB-5ST
J4 CONN USB TYPE MICRO_A/B Hirose Electric Co Ltd ZX62-AB-5PA(11)
J5 CONN USB TYPE A R/A BLACK On Shore Technology Inc USB-A1HSB6
J6 12 POS 0.05" SINGLE ROW TH HEADER Samtec SLM-103-112-L-S
@ J6 3POS 0.05" SINGLE ROW TH HEADER Samtec SLM-103-103-L-S
JP2 2X2 (0.05"x 0.05") TH HEADER Samtec FTS-102-01-L-D
@ JP2 SHUNT 2POS (0.05" x 0.05") SULLINS NPB02DVFN-RC
JP1 CONN HEADER .100" SNGL STR 2POS SULLINS PRPC002SAAN-RC
Q1 TRANS SS PNP 40V 300MW SOT23 Micro Commercial Co. MMBT3906-TP
Q2, Q3 TRANSISTOR NPN GP 40V SOT23 Micro Commercial Co. MMBT3904-TP
Q5 MOSFET P-CH 8V 3.7A SOT23-3 ON Semiconductor NTR2101PT1G
R1, R2, R3, R4 RES 4.7K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT4K70
R5, R6, R7, R8,
R9, R10, R11,
R12, R13
RES 330 OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT330R
Note 1: Depending on the starter kit purchased, the development board will be populated with either a PIC32MZ2048ECM144
(w/Crypto Engine) device or a PIC32MZ2048ECH144 device.
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 26 2013-2014 Microchip Technology Inc.
R14, R15, R16,
R17, R18, R19,
R20, R21, R22,
R23
RES 10K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT10K0
R24, R25, R26,
R27
RES 100K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT100K
R28, R29 RES 200K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT200K
R30, R31, R32 RES 2.21K OHM 1/10W 1% 0603 SMD Panasonic - ECG ERJ-3EKF2211V
R33 RES 3.92K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-073K92L
R34 RES 1K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT1K00
R35 RES 100 OHM 1/10W 5% 0603 SMD Yageo RC0603JR-07100RL
R36 RES 100 OHM 1/4W 1% 1206 SMD Yageo RC1206FR-07100RL
R37 RES 3.16K OHM 1/10W 1% 0603 SMD Yageo RC0603FR-073K16L
R38, R39, R42,
R55
RES 0.0 OHM 1/10W 0603 SMD Rohm Semiconductor MCR03EZPJ000
R48, R49, R50,
R51, R52, R53
RES 33 OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc. RMCF0603FT33R0
S1, S2, S3 Switch, Tact, PB MOM SMT, Series TL3302 C&K PTS635SK25SMTR LFS
U1
(1)
PIC32MZ2048ECH144-I/PH or
PIC32MZ2048ECM144-I/PH
Microchip Technology Inc. PIC32MZ2048ECH144-I/PH or
PIC32MZ2048ECM144-I/PH
U2 IC PIC MCU FLASH 256K 64-TQFP Microchip Technology Inc. PIC24FJ256GB106-I/PT
U3 IC REG LDO 1.5A 3.3V 8DFN Microchip Technology Inc. MCP1727-3302E/MF
U4 IC EEPROM 256 KBIT 10 MHz 8TSSOP Microchip Technology Inc. 25LC256-I/ST
U5 IC MULT CONFIG 3.3/5V .12A 8MSOP Microchip Technology Inc. MCP1253-33X50I/MS
U6 IC PWR DIST SWITCH SNGL SOT23-5 Texas Instruments TPS2051BDBVR
U7 IC SWITCH LOAD FULL FUNC SOT23-5 Fairchild Semiconductor FPF2104
U9 IC FLASH 32 MBIT 8-pin SOIC Microchip Technology Inc. SST26VF032-80-5I-S2AE
Y3 CRYSTAL 12.000000 MHZ 8 pF SMD NDK NX3225SA-12.000000MHZ
Y4 OSC MEMS 24.000 MHz SMD Abracon Corporation ASDMB-24.000MHZ-LC-T
Y5 OSC MEMS 50.000 MHz_1.8V ~3.3V SMD Abracon Corporation ASEMB-50.000MHZ-LC-T
+3.3V_PKOB,
GND
PC TEST POINT MINIATURE SMT Keystone Electronics 5015
bottom of board BUMPON CYLINDRICAL .375X.135 BLK 3M SJ61A8
Y1 CRYSTAL 24 MHz 8 pF SMD AVX CX3225GA24000D0PTVZ1
Y2 OSCILLATOR 32.768 kHz 3.3V SM Abracon Corporation TC25L5I32K7680
C34, C35 CAP CER 8 pF 50V NPO 0603 TDK Corporation C1608C0G1H080D080AA
C36 CAP CER 10000 pF 50V X7R 0603 TDK Corporation C1608X7R1H103M
R56 RES 1M OHM 1/8W 1% 0805 SMD Vishay Dale RMCF0805FT1M00
TABLE B-1: PIC32MZ EMBEDDED CONNECTIVITY (EC) STARTER KIT BILL OF MATERIALS
(CONTINUED)
Reference Description Manufacturer Part No.
Note 1: Depending on the starter kit purchased, the development board will be populated with either a PIC32MZ2048ECM144
(w/Crypto Engine) device or a PIC32MZ2048ECH144 device.
Bill of Materials
2013-2014 Microchip Technology Inc. DS70005147B-page 27
B.2 LAN8740 PHY DAUGHTER BOARD BILL OF MATERIALS
TABLE B-2: LAN8740 PHY DAUGHTER BOARD BILL OF MATERIALS
Reference Description Manufacturer Part No.
C1, C3, C7, C8 Cap, Ceramic, 1 F, 16V X5R TDK Corporation C1608X5R1C105K
C2, C4, C5, C6 Cap, Ceramic, 0.1 F, 50V X7R TDK Corporation C1608X7R1H104M
C9 CAP 470PF 50V CERAMIC X7R 0603 Yageo CC0603KRX7R9BB471
C10, C11,
C12, C13
CAP CER 12 pF 50V 5% NPO 0603 Yageo CC0603JRNPO9BN120
C14 CAP CER 0.022 F 50V 20% X7R 0603 Murata Electronics North America GRM188R71H223MA01D
FB1 FERRITE CHIP 600 OHM 500MA 0805 TDK Corporation MMZ2012Y601B
J1 TWO CONN HEADER .050" 12 POS PCB GOLD Sullins Connector Solutions GRPB121VWVN-RC
@J1 TWO CONN HEADER .050" 3 POS PCB GOLD Sullins Connector Solutions GRPB031VWVN-RC
J2 CONN MAGJACK 1PORT 100 BASE-TX Pulse Electronics Corporation J3011G21DNL
R1, R2, R3,
R4, R6, R8
RES 4.70K OHM 1/10W 1% 0603 SMD Panasonic - ECG ERJ-3EKF4701V
R5, R16 RES 10K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc RMCF0603FT10K0
R7 RES 1.50K OHM 1/10W 1% 0603 SMD Vishay Dale CRCW06031K50FKEA
R11, R12,
R13, R14
RES 33 OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc RMCF0603FT33R0
R15 RES 12.1K OHM 1/10W 1% 0603 SMD Stackpole Electronics Inc RMCF0603FT12K1
R17, R18,
R19, R20
RES TF 1/10W 49.9 OHM 1% 0603 Stackpole Electronics Inc RMCF0603FG49R9
R21, R22 RES TF 1/10W 249 OHM 1% 0603 Stackpole Electronics Inc RMCF0603FG249R
R23 RES 0.0 OHM 1/4W 0805 SMD Yageo RC0805JR-070RL
U1 TXRX Ethernet 32QFN Microchip Technology Inc. LAN8740-EN
PIC32MZ Embedded Connectivity (EC) Starter Kit Users Guide
DS70005147B-page 28 2013-2014 Microchip Technology Inc.
NOTES:
2013-2014 Microchip Technology Inc. DS70005147B-page 29
NOTES:
DS70005147B-page 30 2013-2014 Microchip Technology Inc.
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-673-0699
Fax: 905-673-6509
ASIA/PACIFIC
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2401-1200
Fax: 852-2401-3431
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
China - Hangzhou
Tel: 86-571-2819-3187
Fax: 86-571-2819-3189
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
ASIA/PACIFIC
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Taiwan - Kaohsiung
Tel: 886-7-213-7830
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
EUROPE
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Germany - Pforzheim
Tel: 49-7231-424750
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Venice
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Poland - Warsaw
Tel: 48-22-3325737
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
Worldwide Sales and Service
10/28/13

You might also like