You are on page 1of 43

Student: Paun Mihut Catalin

Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Cuprins:
Section 7 ....................................................................................................................................................... 2
Section 7 Lesson 1 Handling Exceptions ................................................................................................... 2
Test Quiz: Handling Exceptions ............................................................................................................... 10
Section 7 Lesson 2 Trapping Oracle Server Exceptions........................................................................... 13
Test Quiz: Trapping Oracle Server Exceptions ........................................................................................ 24
Section 7 Lesson 3 Trapping User-Defined Exceptions ........................................................................... 28
Test Quiz: Trapping User-Defined Exceptions ........................................................................................ 34
Section 7 Lesson 4 Recognizing the Scope of Exceptions ....................................................................... 37
Test Quiz: Recognizing the Scope of Exceptions ..................................................................................... 41

Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Section 7
Section 7 Lesson 1 Handling Exceptions

Vocabulary
Identify the vocabulary word for each definition below:
Exception Handler Code that defines the recovery actions to be performed when
execution-time errors occur.
Exception Occurs when an error occurs during the execution of a program that
disrupts the normal operation of the program.
Exception handling Allows clean separation of the error processing code from the
executable code so that a program can continue operating in the
presence of errors.
Exception propagating The exception reproduces itself in successive enclosing blocks until
a handler is found or there are no more blocks to search in.

Try It / Solve It
1. What happens when Oracle encounters a runtime problem while executing a PL/SQL
block?
An exception is raised and the rest of the blocks execution section is not executed.

2. What do you need to add to your PL/SQL block to address these problems?
Add an exception section that includes handlers to trap and deal with all possible
problems.

3. List three advantages of handling exceptions within a PL/SQL block.
It can protect the user from frequent repeated errors.
It can prevent data in the database from being lost or overwritten.
PL/SQL code is more readable because error-handling routines can be written in the
same block in which the error occurred.
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE



4. Run this PL/SQL code and then answer the questions that follow.
DECLARE
v_jobid employees.job_id%TYPE;
BEGIN
SELECT job_id
INTO v_jobid
FROM employees
WHERE department_id = 80;
END;
A. What happens when you run the block?
The block fails because there is more than one employee in department 80 and an
exception (error) is raised.

B. In your own words, explain what you can do to fix this problem.

Select a unique column for the WHERE clause (the block could still fail if the unique
value entered did not exist;
Write an exception handler to trap the error.

C. Modify the code to fix the problem. Use a TOO_MANY_ROWS exception handler.
DECLARE
v_jobid employees.job_id%TYPE;
BEGIN
SELECT job_id
INTO v_jobid
FROM employees
WHERE department_id = 80;
EXCEPTION
WHEN TOO_MANY_ROWS THEN
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


DBMS_OUTPUT.PUT_LINE ('Too many rows returned from the query');
END;

D. Run your modified code. What happens this time?
The exception is successfully trapped and the message 'Too many rows returned from
the query is displayed.

5. Run the following PL/SQL block, which tries to insert a new row (with department_id =
50) into the departments table. What happens and why?
BEGIN
INSERT INTO departments (department_id, department_name,manager_id, location_id)
VALUES (50, 'A new department', 100, 1500);
DBMS_OUTPUT.PUT_LINE('The new department was inserted');
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE ('An exception has occurred.');
END;
The INSERT statement failed because department_id 50 already exists and department_id
is a unique column. The rest of the executable section was skipped, therefore the message
The new department was inserted was not displayed. The WHEN OTHERS exception
handler was executed.


6. Enter the following PL/SQL block, which tries to SELECT all the employees in a specific
department. Run it three times, using department_ids 10, 20, and 30. What happens and
why?
DECLARE
v_employee_id employees.employee_id%TYPE;
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


v_last_name employees.last_name%TYPE;
BEGIN
SELECT employee_id, last_name INTO v_employee_id, v_last_name
FROM employees
WHERE department_id = <enter a value>;
DBMS_OUTPUT.PUT_LINE('The SELECT was successful');
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('An exception has occurred');
END;
Using department_id = 10 is successful because there is exactly one employee in that
department, therefore the SELECT returned exactly one row.

Using department_id 20 failed because there is more than one employee in that
department.

Using department_id 30 failed because there are no employees in that department.


7. Modify your code from question 6 to add two more exception handlers to trap the
possible exceptions individually. Use NO_DATA_FOUND and TOO_MANY_ROWS. Re-
run the block three times, using 10, 20, and 30 as before. Observe the message displayed in
each case.
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


DECLARE
v_employee_id employees.employee_id%TYPE;
v_last_name employees.last_name%TYPE;
BEGIN
SELECT employee_id, last_name INTO v_employee_id, v_last_name
FROM employees
WHERE department_id = <Introdu o valoare din cele 3 >;
DBMS_OUTPUT.PUT_LINE('The SELECT was successful');
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('No rows were selected');
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE('More than one row was selected');
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('An exception has occurred');
END;
Pentru valoarea 10 :

Pentru valoarea 20:

Pentru valoarea 30:



Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


8. List three guidelines for trapping exceptions.

Always add exception handlers whenever there is a possibility of an error occurring.
Handle named exceptions whenever possible, instead of using OTHERS in exception
handlers.
Test your code with different combinations of bad data to see what potential errors
arise.
Write out debugging information in your exception handlers.
Carefully consider whether each exception handler should commit the transaction, roll
it back, or let it continue.

9. Enter and run the following PL/SQL block. Explain the output. Note: the WHEN
OTHERS handler successfully handles any type of exception which occurs.
DECLARE
v_number NUMBER(2);
BEGIN
v_number := 9999;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('An exception has occurred');
EN An exception has occurred because the 4-digit value 9999 is too large to be assigned to a
NUMBER(2) variable. The blocks exception section has handled the exception successfully
and displayed An exception has occurred. The exception has NOT been propagated back
to the calling environment (Application Express) which therefore reports Statement
Processed, meaning: success.

10. Modify the block in question 9 to omit the exception handler, then re-run the block.
Explain the output.
DECLARE
v_number NUMBER(2);
BEGIN
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


v_number := 9999;
END;
The block does not handle the exception, which therefore propagates back to Application
Express. Application Express displays an ORA-06502: PL/SQL: numeric or value error: number
precision too large.


11. Enter and run the following code and explain the output.
DECLARE
v_number NUMBER(4);
BEGIN
v_number := 1234;
DECLARE
v_number NUMBER(4);
BEGIN
v_number := 5678;
v_number := 'A character string';
END;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('An exception has occurred');
DBMS_OUTPUT.PUT_LINE('The number is: '||v_number);
END;
The inner blocks attempt to assign a character string to a NUMBER variable causes an
exception. The exception is not handled in the inner block, which therefore propagates the
exception to the outer block. The outer block successfully handles the exception.
The number 1234 (not 5678) is displayed because the inner blocks v_number is out of
scope in the outer block.
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE



Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Test Quiz: Handling Exceptions
Section 1
(Answer all questions in this section)


1. Which of the following is NOT an advantage of including an exception handler in a
PL/SQL block?
Mark for Review
(1) Points


Avoids costly and time-consuming correction of mistakes




Prevents errors from being propagated back to the calling environment




Prevents errors from occurring (*)




Code is more readable because error-handling routines can be written in the same
block in which the error occurred





Correct



2. Which of the following best describes a PL/SQL exception?
Mark for Review
(1) Points


A user enters an invalid password while trying to log on to the database.




An error occurs during the execution of the block, which disrupts the normal
operation of the program. (*)



The programmer forgets to declare a cursor while writing the PL/SQL code.




A compile-time error occurs because the PL/SQL code references a non-existent
table.





Correct



3. Which of these exceptions can be handled by an EXCEPTION section in a PL/SQL block?
Mark for Review
(1) Points


An attempt is made to divide by zero




A SELECT statement returns no rows




Any other kind of exception that can occur within the block




All of the above (*)




None of the above






Correct



4. Only one exception at a time can be raised during one execution of a PL/SQL block.
True or False?
Mark for Review
(1) Points


True (*)




False






Correct



5. Which of the following EXCEPTION sections is constructed correctly? (Choose three.)
Mark for Review
(1) Points

(Choose all correct answers)

Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE




EXCEPTION
WHEN NO_DATA_FOUND THEN statement_1;
WHEN OTHERS THEN statement_2;
END;
(*)



EXCEPTION
WHEN NO_DATA_FOUND THEN statement_1;
WHEN NO_DATA_FOUND THEN statement_2;
WHEN OTHERS THEN statement_3;
END;



EXCEPTION
WHEN OTHERS THEN statement_1;
END;
(*)



EXCEPTION
WHEN OTHERS THEN statement_1;
WHEN NO_DATA_FOUND THEN statement_2;
END;



EXCEPTION
WHEN TOO_MANY_ROWS THEN statement_1;
END;
(*)





Incorrect. Refer to Section 7 Lesson 1.



6. The following EXCEPTION section is constructed correctly. True or False?
EXCEPTION
WHEN ZERO_DIVIDE OR TOO_MANY_ROWS OR NO_DATA_FOUND
THEN statement_1;
statement_2;
WHEN OTHERS
THEN statement_3;
END;
Mark for Review
(1) Points


True (*)




False






Correct



7. Which of the following are NOT good practice guidelines for exception handling?
(Choose two.)
Mark for Review
(1) Points

(Choose all correct answers)



Handle specific named exceptions where possible, instead of relying on WHEN
OTHERS.



Test your code with different combinations of data to see what potential errors can
happen.



Use an exception handler whenever there is any possibility of an error occurring.




Allow exceptions to propagate back to the calling environment. (*)




Include a WHEN OTHERS handler as the first handler in the exception section. (*)


Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE






Correct



8. Examine the following code. Why does this exception handler not follow good practice
guidelines? (Choose two.)
DECLARE
v_dept_name departments.department_name%TYPE;
BEGIN
SELECT department_name INTO v_dept_name FROM departments
WHERE department_id = 75;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('A select returned more than one row');
END;
Mark for Review
(1) Points

(Choose all correct answers)



The exception handler should COMMIT the transaction.




The exception handler should test for the named exception NO_DATA_FOUND. (*)




You should not use DBMS_OUTPUT.PUT_LINE in an exception handler.




The exception section should include a WHEN TOO_MANY_ROWS exception
handler. (*)



department_id 75 does not exist in the departments table.






Correct


Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Section 7 Lesson 2 Trapping Oracle Server Exceptions
Vocabulary
Identify the vocabulary word for each definition below:

Predefined Oracle Server
Errors
Each of these has a predefined name. For example, if the error ORA-
01403 occurs when no rows are retrieved from the database in a
SELECT statement, then PL/SQL raises the predefined exception-
name NO_DATA_FOUND.
PRAGMA
EXCEPTION_INIT
Tells the compiler to associate an exception name with an Oracle
error number. That allows you to refer to any Oracle Server
exception by name and to write a specific handler for it.
SQLERRM Returns character data containing the message associated with the
error number
Non-predefined Oracle
Server Errors
Each of these has a standard Oracle error number (ORA-nnnnn) and
error message, but not a predefined name. We declare our own
names for these so that we can reference these names in the
exception section.
SQLCODE Returns the numeric value for the error code (You can assign it to a
NUMBER variable.)

Try It / Solve It
1. What are the three types of exceptions that can be handled in a PL/SQL block?
predefined Oracle errors
non-predefined Oracle errors
user-defined errors

2. What is the difference in how each of these three types of exceptions is handled in the
PL/SQL block?
predefined: Oracle has assigned a name to about 20 of the most common errors. We
reference the predefined names directly in the exception section of the block;
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


non-predefined: these errors do not have names and so a name must be defined in the
declare section and associated with an Oracle error number; the name is then used in
the exception section;
user defined: these are unknown to Oracle and must be named in the declare section,
raised explicitly in the executable section and then the name used in the exception
section

3. Enter and run the following PL/SQL block. Look at the output and answer the following
questions:
DECLARE
v_number NUMBER(6,2) := 100;
v_region_id wf_world_regions.region_id%TYPE;
v_region_name wf_world_regions.region_name%TYPE;
BEGIN
SELECT region_id, region_name INTO v_region_id, v_region_name
FROM wf_world_regions
WHERE region_id = 1;
DBMS_OUTPUT.PUT_LINE('Region: ' || v_region_id ||' is: ' || v_region_name);
v_number := v_number / 0;
END;
A. What error message is displayed and why ?
Because region_id = 1 does not exist, the predefined exception NO_DATA_FOUND is
raised but is not trapped within the block. The exception is propagated back to the
calling environment (Application Express) which displays ORA-01403: no data found

B. Modify the block to handle this exception and re-run your code. Now what happens and
why?
DECLARE
v_number NUMBER(6,2) := 100;
v_region_id wf_world_regions.region_id%TYPE;
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


v_region_name wf_world_regions.region_name%TYPE;
BEGIN
SELECT region_id, region_name INTO v_region_id, v_region_name
FROM wf_world_regions
WHERE region_id = 1;
DBMS_OUTPUT.PUT_LINE('Region: ' || v_region_id ||' is: ' || v_region_name);
v_number := v_number / 0;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('Select returned no rows');
END;
Now the exception is successfully trapped and the corresponding exception handler is
executed.


C. Modify the block again to change the WHERE clause to region_id = 29. Re-run the
block. Now what happens and why?
Now the SELECT executes successfully because region_id 29 exists. Block execution
continues, but the next statement attempts to divide 100 by zero and raises an
unhandled ORA-01476 exception.

D. Modify the block again to handle the latest exception and re-run your code.
DECLARE
v_number NUMBER(6,2) := 100;
v_region_id wf_world_regions.region_id%TYPE;
v_region_name wf_world_regions.region_name%TYPE;
BEGIN
SELECT region_id, region_name INTO v_region_id, v_region_name
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


FROM wf_world_regions
WHERE region_id = 29;
DBMS_OUTPUT.PUT_LINE('Region: ' || v_region_id ||' is: ' || v_region_name);
v_number := v_number / 0;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('Select returned no rows');
WHEN ZERO_DIVIDE THEN
DBMS_OUTPUT.PUT_LINE('Attempt to divide by zero');
END;


4. Enter and run the following PL/SQL block. Look at the output and answer the following
questions:
DECLARE
CURSOR regions_curs IS
SELECT * FROM wf_world_regions
WHERE region_id < 20
ORDER BY region_id;
regions_rec regions_curs%ROWTYPE;
v_count NUMBER(6);
BEGIN
LOOP
FETCH regions_curs INTO regions_rec;
EXIT WHEN regions_curs%NOTFOUND;
DBMS_OUTPUT.PUT_LINE('Region: '|| regions_rec.region_id ||' Name: ' ||
regions_rec.region_name);
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


END LOOP;
CLOSE regions_curs;
SELECT COUNT(*) INTO v_count
FROM wf_world_regions
WHERE region_id = 1;
DBMS_OUTPUT.PUT_LINE('The number of regions is: ' || v_count);
END;
A. What happens and why ?
The first FETCH fails because the cursor has not been opened. The predefined
exception INVALID_CURSOR is raised but is not trapped within the block.

B. Modify the block to handle the exception and re-run your code.
DECLARE
CURSOR regions_curs IS
SELECT * FROM wf_world_regions
WHERE region_id < 20
ORDER BY region_id;
regions_rec regions_curs%ROWTYPE;
v_count NUMBER(6);
BEGIN
LOOP
FETCH regions_curs INTO regions_rec;
EXIT WHEN regions_curs%NOTFOUND;
DBMS_OUTPUT.PUT_LINE('Region: '|| regions_rec.region_id ||' Name: ' ||
regions_rec.region_name);
END LOOP;
CLOSE regions_curs;
SELECT COUNT(*) INTO v_count
FROM wf_world_regions
WHERE region_id = 1;
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


DBMS_OUTPUT.PUT_LINE('The number of regions is: ' || v_count);
EXCEPTION
WHEN INVALID_CURSOR THEN
DBMS_OUTPUT.PUT_LINE('Attempt to fetch from an unopenedcursor ');
END;
C. Modify the block again to add an OPEN statement for the cursor, and re-run your code.
Now what happens and why? Remember that region_id = 1 does not exist.
DECLARE
CURSOR regions_curs IS
SELECT * FROM wf_world_regions
WHERE region_id < 20
ORDER BY region_id;
regions_rec regions_curs%ROWTYPE;
v_count NUMBER(6);
BEGIN
OPEN regions_curs;
LOOP
FETCH regions_curs INTO regions_rec;
EXIT WHEN regions_curs%NOTFOUND;
DBMS_OUTPUT.PUT_LINE('Region: '|| regions_rec.region_id || ' Name: ' ||
regions_rec.region_name);
END LOOP;
CLOSE regions_curs;
SELECT COUNT(*) INTO v_count
FROM wf_world_regions
WHERE region_id = 1;
DBMS_OUTPUT.PUT_LINE('The number of regions is: ' || v_count);
EXCEPTION
WHEN INVALID_CURSOR THEN
DBMS_OUTPUT.PUT_LINE('Attempt to fetch from an unopened cursor');
END;
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


The cursor loop now works fine, so execution continues to the SELECT COUNT(*)
Some students may expect this to fail because region_id 1 does not exist. But a SELECT
COUNT(*) (unlike SELECT * ) always returns exactly one row, in this case with a
value of 0.

5. Oracle Server Errors:
A. Add an exception handler to the following code to trap the following predefined Oracle
Server errors: NO_DATA_FOUND, TOO_MANY_ROWS, and DUP_VAL_ON_INDEX.
DECLARE
v_language_id wf_languages.language_id%TYPE;
v_language_name wf_languages.language_name%TYPE;
BEGIN
SELECT language_id, language_name
INTO v_language_id, v_language_name
FROM wf_languages
WHERE LOWER(language_name) LIKE '<substring%>'; -- for example 'ab%'
INSERT INTO wf_languages(language_id, language_name)
VALUES(80, null);
END;
Add the following exception section:
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('No rows were found');
WHEN TOO_MANY_ROWS THEN
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


DBMS_OUTPUT.PUT_LINE('More than one row was found');
WHEN DUP_VAL_ON_INDEX THEN
DBMS_OUTPUT.PUT_LINE('This language id already exists');

B. Test your block twice using each of the following language substrings: ba, ce. There are
several language_names beginning with Ba but none beginning with Ce.
Pentru ba%:

Pentru ce%:


C. Now test your block a third time using substring: al. There is exactly one
language_name beginning with Al. Note that language_id 80 (Arabic) already exists.
Explain the output.
The SELECT succeeds but the INSERT fails with an ORA-01400 exception because
language_name cannot be null.

D. Now (keeping the substring as al) add a non_predefined exception handler to trap the
ORA-01400 exception. Name your exception e_null_not_allowed. Rerun the code and
observe the results.
DECLARE
v_language_id wf_languages.language_id%TYPE;
v_language_name wf_languages.language_name%TYPE;
e_null_not_allowed EXCEPTION;
PRAGMA EXCEPTION_INIT(e_null_not_allowed, -01400);
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


BEGIN
SELECT language_id, language_name
INTO v_language_id, v_language_name
FROM wf_languages
WHERE lower(language_name) LIKE al%;
INSERT INTO wf_languages(language_id, language_name)
VALUES(80, null);
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('No rows were found');
WHEN TOO_MANY_ROWS THEN
DBMS_OUTPUT.PUT_LINE('More than one row was found');
WHEN DUP_VAL_ON_INDEX THEN
DBMS_OUTPUT.PUT_LINE('This language id already exists');
WHEN e_null_not_allowed THEN
DBMS_OUTPUT.PUT_LINE('Language name cannot be null');
END;


Extension exercise
1. In preparation for this exercise, run the following SQL statement to create an error-
logging table:
CREATE TABLE error_log (who VARCHAR2(30),
when DATE,
error_code NUMBER(6),
error_message VARCHAR2(255));
Modify your PL/SQL block from question 5 to remove the four explicit exception handlers,
replacing them with a single WHEN OTHERS handler. The handler should INSERT a row into
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


the error_log table each time an exception is raised and handled. The row should consist of the
Oracle username (who), when the error was raised (when), and the SQLCODE and SQLERRM
of the exception. Test your block several times, with different data values to raise each of the
four kinds of exceptions handled in the block. Finally, SELECT from the error-logging table to
check that the rows have been inserted.
DECLARE
v_language_id wf_languages.language_id%TYPE;
v_language_name wf_languages.language_name%TYPE;
v_sqlcode NUMBER(5);
v_sqlerrm VARCHAR2(255);
BEGIN
SELECT language_id, language_name
INTO v_language_id, v_language_name
FROM wf_languages
WHERE lower(language_name) LIKE '<aici inlocuim ca la exercitiul de mai sus %>';
INSERT INTO wf_languages(language_id, language_name)
VALUES(80, null);
EXCEPTION
WHEN OTHERS THEN
v_sqlcode := SQLCODE;
v_sqlerrm := SQLERRM;
INSERT INTO error_log(who, when, error_code, error_message)
VALUES(USER, SYSDATE, v_sqlcode, v_sqlerrm);
END;
SELECT * FROM error_log;

Dupa mai multe verificari de coduri am mai facut un SELECT:
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE



Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Test Quiz: Trapping Oracle Server Exceptions
Section 1
(Answer all questions in this section)


1. Which of the following is NOT a predefined Oracle Server error?
Mark for Review
(1) Points


TOO_MANY_ROWS




ZERO_DIVIDE




DUP_VAL_ON_INDEX




NO_DATA_FOUND




e_sal_too_high EXCEPTION; (*)






Correct



2. Which of the following best describes a predefined Oracle Server error?
Mark for Review
(1) Points


Is not raised automatically but must be declared and raised explicitly by the
PL/SQL programmer



Is associated with an Oracle error number using PRAGMA EXCEPTION_INIT




Has a standard Oracle error number but must be declared and named by the
PL/SQL programmer



Has a standard Oracle error number and a standard name which can be
referenced in the EXCEPTION section (*)





Correct



3. Which kind of error can NOT be handled by PL/SQL?
Mark for Review
(1) Points


Non-predefined Oracle Server errors




Syntax errors (*)




Predefined Oracle Server errors




User-defined errors






Correct



4. Examine the following code. At Line A, you want to raise an exception if the
employee's manager_id is null. What kind of exception is this?
DECLARE
v_mgr_id employees.manager_id%TYPE;
BEGIN
SELECT manager_id INTO v_mgr_id FROM employees
WHERE employee_id = 100;
IF v_mgr_id IS NULL THEN
-- Line A
END IF;
...
Mark for Review
(1) Points

Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE




A NO_DATA_FOUND exception




A non-predefined Oracle server exception




A constraint violation




A user-defined exception (*)




A predefined Oracle Server exception






Correct



5. How would you trap Oracle Server exception ORA-01403: no data found?
Mark for Review
(1) Points


WHEN NO_DATA_FOUND THEN ... (*)




WHEN SQL%ROWCOUNT=0 THEN ...




WHEN NO DATA FOUND THEN ...




WHEN ORA-01403 THEN ...






Correct



6. No employees exist whose salary is less than 2000. Which exception handlers would
successfully trap the exception that will be raised when the following code is
executed? (Choose two.)
DECLARE
v_mynum NUMBER := 10;
v_count NUMBER;
BEGIN
SELECT COUNT(*) INTO v_count FROM employees
WHERE salary < 2000;
v_mynum := v_mynum / v_count;
EXCEPTION ...
END;
Mark for Review
(1) Points

(Choose all correct answers)



NO_DATA_FOUND




ZERO_DIVIDE (*)




SQL%ROWCOUNT = 0




OTHER




OTHERS (*)






Correct



7. What is the correct syntax to associate an exception named EXCEPNAME with the
non-predefined Oracle Server error ORA-02292?
Mark for Review
(1) Points


SQLCODE (-2292, excepname);




RAISE_APPLICATION_ERROR (-2292, excepname);




PRAGMA EXCEPTION_INIT (excepname, -2292) (*)


Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE




WHEN (-2292, excepname) THEN






Correct



8. An ORA-1400 exception is raised if an attempt is made to insert a null value into a
NOT NULL column. DEPARTMENT_ID is the primary key of the DEPARTMENTS table.
What will happen when the following code is executed?
DECLARE
e_not_null EXCEPTION;
BEGIN
PRAGMA EXCEPTION_INIT(e_not_null, -1400);
INSERT INTO departments (department_id, department_name)
VALUES(null, 'Marketing');
EXCEPTION
WHEN e_not_null THEN
DBMS_OUTPUT.PUT_LINE('Cannot be null');
END;
Mark for Review
(1) Points


The code will not execute because the syntax of PRAGMA EXCEPTION_INIT is
wrong.



The code will not execute because the syntax of the INSERT statement is wrong.




The exception will be raised and "Cannot be null" will be displayed.




The code will not execute because PRAGMA EXCEPTION_INIT must be coded in
the DECLARE section. (*)





Correct



9. Examine the following code. The UPDATE statement will raise an ORA-02291
exception.
BEGIN
UPDATE employees SET department_id = 45;
EXCEPTION
WHEN OTHERS THEN
INSERT INTO error_log_table VALUES (SQLCODE);
END;
What will happen when this code is executed?
Mark for Review
(1) Points


The code will fail because we cannot use functions like SQLCODE directly in a
SQL statement. (*)



The code will fail because we access error message numbers by using
SQLERRNUM, not SQLCODE.



The code will fail because SQLCODE has not been declared.




The code will execute and insert error number 02291 into error_log_table.






Correct



10. Which type of exception MUST be explicitly raised by the PL/SQL programmer?
Mark for Review
(1) Points


User-defined exceptions (*)




Predefined Oracle server errors such as TOO_MANY_ROWS




Non-predefined Oracle server errors such as ORA-01203


Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE




All of the above






Correct



11. A PL/SQL block executes and an Oracle Server exception is raised. Which of the
following contains the text message associated with the exception?
Mark for Review
(1) Points


SQLERRM (*)




SQL_MESSAGE_TEXT




SQLCODE




SQL%MESSAGE






Correct



12. Which one of the following events would implicitly raise an exception?
Mark for Review
(1) Points


A database constraint is violated. (*)




An UPDATE statement modifies no rows.




A SELECT statement returns exactly one row.




The PL/SQL programmer mis-spells the word BEGIN as BEGAN.






Correct


Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Section 7 Lesson 3 Trapping User-Defined Exceptions
Vocabulary
Identify the vocabulary word for each definition below:
RAISE_APPLICATIO
N_ERROR
A procedure used to return user-defined error messages from
stored subprograms.
RAISE Use this statement to raise a named exception.
user-defined errors These errors are not automatically rased by the Oracle Server, but
are defined by the programmer and are specific to the
programmer's code.

Try It / Solve It
All the questions in this exercise use a copy of the employees table. Create this copy by running
the following SQL statement:
CREATE TABLE excep_emps AS SELECT * FROM employees;
1. Create a PL/SQL block that updates the salary of every employee to a new value of
10000 in a chosen department. Include a user-defined exception handler that handles the
condition where no rows are updated and displays a custom message. Also include an
exception handler that will trap any other possible error condition and display the
corresponding SQLCODE and SQLERRM. Test your code three times, using
department_ids 20, 30, and 40.
DECLARE
e_no_rows_updated EXCEPTION;
BEGIN
UPDATE excep_emps
SET salary = 10000
WHERE department_id = <introdu department_id>;
IF SQL%NOTFOUND THEN -- sau putem spune: IF SQL%ROWCOUNT = 0
RAISE e_no_rows_updated;
END IF;
EXCEPTION
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


WHEN e_no_rows_updated THEN
DBMS_OUTPUT.PUT_LINE ( 'There are no employees in that department.');
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('An error has occurred:'||SQLCODE || '-' || SQLERRM);
END;
Pentru department_id = 20:

Pentru department_id = 30:

Pentru department_id = 40:


2. Modify your code from question 2 to handle the condition where no rows are updated
using RAISE_APPLICATION_ERROR procedure in the exception section. Use an error
number of 20202. Test your code again using department_id 40 and check that the 20202
error is displayed.
DECLARE
e_no_rows_updated EXCEPTION;
BEGIN
UPDATE excep_emps
SET salary = 10000
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


WHERE department_id = 40;
IF SQL%NOTFOUND THEN
RAISE e_no_rows_updated;
END IF;
EXCEPTION
WHEN e_no_rows_updated THEN
RAISE_APPLICATION_ERROR(-20202,'There are no employees in that department');
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('An error has occurred: '||SQLCODE || '-' || SQLERRM);
END;

3. Modify your code from question 3 to use RAISE_APPLICATION_ERROR in the
executable section instead of the exception section. Test your code again using
department_id 40.
DECLARE
_no_rows_updated EXCEPTION;
BEGIN
UPDATE excep_emps
SET salary = 10000
WHERE department_id = 40;
IF SQL%NOTFOUND THEN
RAISE_APPLICATION_ERROR(-20202,'There are no employees in that department');
END IF;
END;

4. Before starting this question, disable Autocommit in Application Express.
A. Enter and run the following PL/SQL block using department_id = 40, and explain the
output.
DECLARE
v_dept_id excep_emps.department_id%TYPE;
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


v_count NUMBER;
BEGIN
v_dept_id := 40;
SELECT COUNT(*) INTO v_count
FROM excep_emps
WHERE department_id = v_dept_id;
DBMS_OUTPUT.PUT_LINE('There are ' || v_count || ' employees');
DELETE FROM excep_emps
WHERE department_id = v_dept_id;
DBMS_OUTPUT.PUT_LINE(SQL%ROWCOUNT ||' employees were deleted');
ROLLBACK;
END;
Both the SELECT and the DELETE execute successfully (no exceptions are raised) although
there are no employees in department 40.

B. Modify your block to include two user-defined exception handlers, one to test whether
SELECT returns a value of 0, and the other to test if no rows were DELETEd. Declare the
exceptions and RAISE them explicitly before trapping them in the exception section. Do
NOT use RAISE_APPLICATION_ERROR. Test your modified block using
department_id 40.
DECLARE
v_dept_id excep_emps.department_id%TYPE;
v_count NUMBER;
e_no_emps_in_dept EXCEPTION;
e_no_rows_deleted EXCEPTION;
BEGIN
v_dept_id := 40;
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


SELECT COUNT(*) INTO v_count
FROM excep_emps
WHERE department_id = v_dept_id;
IF v_count = 0 THEN
RAISE e_no_emps_in_dept;
END IF;
DBMS_OUTPUT.PUT_LINE('There are ' || v_count || ' employees');
DELETE FROM excep_emps
WHERE department_id = v_dept_id;
IF SQL%NOTFOUND THEN -- or IF SQL%ROWCOUNT = 0 THEN
RAISE e_no_rows_deleted;
END IF;
DBMS_OUTPUT.PUT_LINE(SQL%ROWCOUNT ||' employees were deleted');
ROLLBACK;
EXCEPTION
WHEN e_no_emps_in_dept THEN
DBMS_OUTPUT.PUT_LINE('This department has no employees');
WHEN e_no_rows_deleted THEN
DBMS_OUTPUT.PUT_LINE('No employees were deleted');
END;

C. Modify your block again to use RAISE_APPLICATION_ERROR in the executable
section. Use error numbers 20203 and 20204. Test your modified block using
department_id 40.
DECLARE
v_dept_id excep_emps.department_id%TYPE;
v_count NUMBER;
BEGIN
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


v_dept_id := 40;
SELECT COUNT(*) INTO v_count
FROM excep_emps
WHERE department_id = v_dept_id;
IF v_count = 0 THEN
RAISE_APPLICATION_ERROR(-20203,'This department has no employees');
END IF;
DBMS_OUTPUT.PUT_LINE('There are ' || v_count || ' employees');
DELETE FROM excep_emps
WHERE department_id = v_dept_id;
IF SQL%NOTFOUND THEN -- sau IF SQL%ROWCOUNT = 0 THEN
RAISE_APPLICATION_ERROR(-20204,'No employees were deleted');
END IF;
DBMS_OUTPUT.PUT_LINE(SQL%ROWCOUNT ||' employees were deleted');
ROLLBACK;
END;

Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Test Quiz: Trapping User-Defined Exceptions
Section 1
(Answer all questions in this section)


1. What is a user-defined exception?
Mark for Review
(1) Points


A predefined Oracle server exception such as NO_DATA_FOUND.




An exception which has a predefined Oracle error number but no predefined
name.



An exception which is not raised automatically by the Oracle server, but must be
declared and raised explicitly by the PL/SQL programmer. (*)



An exception handler which the user (the programmer) includes in the EXCEPTION
section.





Correct



2. What is the datatype of a user-defined exception?
Mark for Review
(1) Points


BOOLEAN




VARCHAR2




EXCEPTION (*)




NUMBER




None of the above






Correct



3. What is wrong with the following code?
BEGIN
UPDATE employees SET salary = 20000
WHERE job_id = 'CLERK';
IF SQL%ROWCOUNT = 0 THEN
RAISE NO_DATA_FOUND; -- Line A
END IF;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('No employee was updated');
END;
Mark for Review
(1) Points


Line A should be: HANDLE NO_DATA_FOUND




You cannot use SQL%ROWCOUNT in conditional control statements such as IF or
CASE.



Nothing is wrong; the code will execute correctly. (*)




NO_DATA_FOUND has not been DECLAREd.




You cannot explicitly raise predefined Oracle Server errors such as
NO_DATA_FOUND.





Correct



4. What will be displayed when the following code is executed?
Mark for Review
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


DECLARE
e_myexcep EXCEPTION;
BEGIN
DBMS_OUTPUT.PUT_LINE('Message 1');
RAISE e_myexcep;
DBMS_OUTPUT.PUT_LINE('Message 2');
EXCEPTION
WHEN e_myexcep THEN
DBMS_OUTPUT.PUT_LINE('Message 3');
RAISE e_myexcep;
DBMS_OUTPUT.PUT_LINE('Message 4');
END;
(1) Points


The code will not execute because it contains at least one syntax error.




The code will execute but will return an unhandled exception to the calling
environment.
(*)



Message 1
Message 2
Message 3
Message 4



Message 1
Message 3
Message 4



Message 1
Message 3





Correct



5. The following line of code is correct. True or False?
RAISE_APPLICATION_ERROR(-21001,'My error message');
Mark for Review
(1) Points


True




False (*)






Correct



6. How are user-defined exceptions raised ?
Mark for Review
(1) Points


By PRAGMA EXCEPTION_INIT




By DECLARE e_my_excep EXCEPTION;




By RAISE exception_name; (*)




None of the above. They are raised automatically by the Oracle server.






Correct



7. The following three steps must be performed to use a user-defined exception: - Raise
the exception - Handle the exception - Declare the exception In what sequence must
these steps be performed?
Mark for Review
(1) Points


The steps can be performed in any order.


Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE




Declare, Raise, Handle (*)




Handle, Raise, Declare




Raise, Handle, Declare






Correct



8. You want to display your own error message to the user. What is the correct syntax to
do this?
Mark for Review
(1) Points


RAISE application_error;




RAISE_APPLICATION_ERROR('My own message', -20001);




RAISE_APPLICATION_ERROR(20001, 'My own message');




RAISE_APPLICATION_ERROR (-20001, 'My own message'); (*)






Correct



Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Section 7 Lesson 4 Recognizing the Scope of Exceptions
Vocabulary
Identify the vocabulary word for each definition below:
Propogation The inner block terminates unsuccessfully, and PL/SQL passes the
exception to the outer block.
Exception scope The portion of a program in which the exception is declared and is
accessible.

Try It / Solve It
1. Enter and run the following code twice, once for each of the two country_ids 5 (which
does not exist) and 672 (Antarctica, which does exist but has no currency).
DECLARE
v_country_name wf_countries.country_name%TYPE;
v_currency_code wf_countries.currency_code%TYPE;
BEGIN
DECLARE
e_no_currency EXCEPTION;
BEGIN
SELECT country_name, currency_code
INTO v_country_name, v_currency_code
FROM wf_countries
WHERE country_id = 5; -- repeat with 672
IF v_currency_code = 'NONE' THEN
RAISE e_no_currency;
END IF;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('This country does not exist');
WHEN e_no_currency THEN
DBMS_OUTPUT.PUT_LINE('This country exists but has no currency');
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


END;
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Another type of error occurred');
END;
A. Explain the output. Save your code.
Country_id 5 raises NO_DATA_FOUND and This country does not exist is displayed.

Country_id 672 raises e_no_currency and This country exists but has no currency is displayed.


B. Modify the code to move the two exception handlers to the outer block. Leave the
declaration of e_no_currency in the inner block. Execute twice, again using country_ids 5
and 672. Now what happens and why? Save your code.
DECLARE
v_country_name wf_countries.country_name%TYPE;
v_currency_code wf_countries.currency_code%TYPE;
BEGIN
DECLARE
e_no_currency EXCEPTION;
BEGIN
SELECT country_name, currency_code
INTO v_country_name, v_currency_code
FROM wf_countries
WHERE country_id = 5; -- repeat with 672
IF v_currency_code = 'NONE' THEN
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


RAISE e_no_currency;
END IF;
END;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('This country does not exist');
WHEN e_no_currency THEN
DBMS_OUTPUT.PUT_LINE('This country exists but has no currency');
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Another type of error occurred');
END;
In both executions, a PLS-00201 Identifier E_NO_CURRENCY must be declared error
occurs, because e_no_currency was declared in the inner block and is therefore out of
scope in the outer block. We would expect this for country_id 672, but what about
country_id 5, which should raise a NO_DATA_FOUND? PLS-00201 is a compile-time
error. This shows that PL/SQL checks the scope of variables when compiling the code, not
when executing it. If invalid scope is detected, the code is not executed at all.

C. Modify the code again to move the declaration of e_no_currency to the outer block. Re-
execute again using country_ids 5 and 672. Now what happens and why?
DECLARE
v_country_name wf_countries.country_name%TYPE;
v_currency_code wf_countries.currency_code%TYPE;
e_no_currency EXCEPTION;
BEGIN
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


BEGIN
SELECT country_name, currency_code
INTO v_country_name, v_currency_code
FROM wf_countries
WHERE country_id = 5; -- repeat with 672
IF v_currency_code = 'NONE' THEN
RAISE e_no_currency;
END IF;
END;
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('This country does not exist');
WHEN e_no_currency THEN
DBMS_OUTPUT.PUT_LINE('This country exists but has no currency');
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Another type of error occurred');
END;
Pentru country_id = 5 :

Pentru country_id = 672 :

Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


Test Quiz: Recognizing the Scope of Exceptions
Section 1
(Answer all questions in this section)


1. Predefined Oracle Server exceptions such as NO_DATA_FOUND can be raised
automatically in inner blocks and handled in outer blocks. True or False?
Mark for Review
(1) Points


True (*)




False






Correct



2. Non-predefined Oracle Server errors (associated with Oracle error numbers by PRAGMA
EXCEPTION_INIT) can be declared and raised in inner blocks and handled in outer
blocks. True or False?
Mark for Review
(1) Points


True




False (*)






Correct



3. What will happen when the following code is executed?
DECLARE
e_outer_excep EXCEPTION;
BEGIN
DECLARE
e_inner_excep EXCEPTION;
BEGIN
RAISE e_outer_excep;
END;
EXCEPTION
WHEN e_outer_excep THEN
DBMS_OUTPUT.PUT_LINE('Outer raised');
WHEN e_inner_excep THEN
DBMS_OUTPUT.PUT_LINE('Inner raised');
END;
Mark for Review
(1) Points


The code will execute successfully and 'Outer Raised' will be displayed.




The code will propagate the e_outer_excep back to the calling environment
(Application Express).



The code will fail to compile because e_inner_excep cannot be referenced in the
outer block. (*)



The code will fail to compile because e_inner_excep was declared but never
RAISEd.





Correct



4. What will happen when the following code is executed?
DECLARE
e_excep1 EXCEPTION;
e_excep2 EXCEPTION;
BEGIN
RAISE e_excep1;
EXCEPTION
WHEN e_excep1 THEN BEGIN
Mark for Review
(1) Points
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


RAISE e_excep2; END;
END;


It will compile successfully and return an unhandled e_excep2 to the calling
environment. (*)



It will fail to compile because you cannot declare more than one exception in the
same block.



It will fail to compile because e_excep1 is out of scope in the subblock.




It will fail to compile because you cannot have a subblock inside an exception
section.





Correct



5. There are three employees in department 90. What will be displayed when this code is
executed?
DECLARE
v_last_name employees.last_name%TYPE;
BEGIN
DBMS_OUTPUT.PUT_LINE('Message 1');
BEGIN
SELECT last_name INTO v_last_name
FROM employees WHERE department_id = 90;
DBMS_OUTPUT.PUT_LINE('Message 2');
END;
DBMS_OUTPUT.PUT_LINE('Message 3');
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Message 4');
END;
Mark for Review
(1) Points


Message 1
Message 3
Message 4



Message 1
Message 4
(*)



Message 1




An unhandled exception will be propagated back to the calling environment.




None of the above






Correct



6. What will be displayed when the following code is executed?
<<outer>>
DECLARE
v_myvar NUMBER;
BEGIN
v_myvar := 25;
DECLARE
v_myvar NUMBER := 100;
BEGIN
outer.v_myvar := 30;
v_myvar := v_myvar / 0;
outer.v_myvar := 35;
Mark for Review
(1) Points
Student: Paun Mihut Catalin
Master: SIMR
Anul: II
Materia: DEZVOLTAREA APLICAIILOR ORACLE


END;
v_myvar := 40;
EXCEPTION
WHEN ZERO_DIVIDE THEN
DBMS_OUTPUT.PUT_LINE(v_myvar);
END;


100




30 (*)




35




25




40






Correct

You might also like