Sd732-2e-19 Swing Frame for protective cabinet Page 1/ 4 1 Application Fitting 19 rack mounted instruments into INTERTEC cabinets and houses 2 Description The integrated swing frame allows 19 racks to be used with all the advantages of INTERTEC protective cabinets, e.g.: Efficient insulation which prevents condensation and temperature variation A high degree of dust and water protection for sensitive instruments is possible up to IP 65 Double glazed windows in acrylic or safety glass installed at frame height Complete system of accessories 3 Advantages Exceptionally variable construction system Nearly all special requests can be incorporated No separate framework is needed, as it is integrated into the existing mounting rail system. Corrosion-resistant 19 swing frame fabricated of bright Stainless steel Intermediate sizes, special heights and widths are available 4 Features 19 construction system acc. IEC 60297 (DIN 41 494) Low distortion, welded construction Infinitely variable in height Locked by double spade bit style key and lock 5 Options The tables on pages 2 to 4 show the most common versions. Where possible the standard arrangement is centred and an offset arrangement is shown in the plan view next to it. The dimensions D, X and Y can be selected within certain limits, and the maximum available depth E is dependent upon them. Special designs available on request Number of units to your specification: up to 1000 mm a maximum of 16 units are possible, up to 1250 mm a maximum of 21 units are possible, up to 1500 mm a maximum of 26 units are possible, up to 1750 mm a maximum of 31 units are possible, up to 2000 mm a maximum of 39 units are possible. Side covers (shown in the diagram in maximum width, dimensions X and Y) Hinged left or right. Painted grey RAL 7032 Also available as metrical construction system to IEC 60917
BASIC CLASSIC
Detail W
INTERTEC-Hess GmbH Raffineriestrae 8 D-93333 Neustadt/Donau Tel: +49 (0) 9445/95 32-0 Fax: +49 (0)9445/95 32 32 19 Swing Frame for protective cabinet Sd732-2e-19 Swing Frame for protective cabinet Page 2/ 4 6 Overview of Arrangements I. Twin beam mounting II. Single beam mounting III. Twin beam mounting IV. Single beam mounting fixed behind door depth adjustable
Installation weight 100kg, higher loads on request Locking point top and/or bottom possible Installation weight in CLASSIC 50 kg, in BASIC 30 kg, higher loads on request. No restrictions from lower cross-beam Installation weight 100kg, higher loads on request Locking point top and/or bottom possible Installation weight in CLASSIC 50 kg, in BASIC 30 kg, higher loads on request. No restrictions from lower cross-beam
mounting in BASIC ... in CLASSIC
mounting in BASIC ... in CLASSIC I. Twin beam mounting, fixed behind door 600