You are on page 1of 2

High Power HF SSB

systems
H F R A D I O C O M M U N I C A T I O N S
F E A T U R E S
Codans range of high power systems is suitable for voice and data
transmissions. The systems are rated for 500 watts and 1 kilowatt peak
envelope power (PEP) operation. These cater for the demand for competitively
priced, multi-channel base station packages.
Compatible interface
The high power systems are
interfaced for fully automatic
operation with an NGT SR
transceiver, which has a channel
capacity of up to 400 channels.
Control of the transceiver system
is achieved using the NGT
handset, mounted on the rack, or
the optional NGT desk console.
Fully remote controllable
Using the NGT Remote Control
System, consisting of an NGT
Remote Interface (NRI) 3030 and
line modem, you can control all
operating functions over
telephone lines.
Additional features
Codans high power systems offer
a range of features including:
! Automatic tuner
protection: when used with
an external antenna tuner,
the system automatically
tunes on low power before
engaging the high power
amplifier
! Continuous mode
operation: the system is
rated for continuous mode
operation in all modes, and
can be used for either data
or voice transmissions
! Back-up power (optional): if
an external back-up battery
is connected, the
transceiver will operate in
Stand-by mode at 125 W
PEP in the event of a mains
power failure
! Amplifier fault detection: a
message displays on the
NGT handset in the event of
a system failure
Equipment cabinet
The high power systems come
pre-assembled into a free
standing cabinet, which houses
the NGT SR transceiver, handset,
speaker, high power amplifier and
required power supplies.
The cabinet has room to
accommodate a range of auxiliary
equipment such as:
! NGT Remote Control
System
! 3012 HF data modem
! 9001 HF fax and data
interface
! RTU-292 telephone
interface
Typical 500 watt system
NGT SR desk console (optional)
Head Office
Codan Limited
ABN 77 007 590 605
81 Graves Street
Newton SA 5074
AUSTRALIA
Telephone +61 8 8305 0311
Facsimile +61 8 8305 0411
asiasales@codan.com.au
www.codan.com.au
Codan Limited
ABN 77 007 590 605
532 Seventeen Mile Rocks Road
Sinnamon Park Qld 4073
AUSTRALIA
Telephone +61 7 3291 6333
Facsimile +61 7 3291 6350
Codan (UK) Ltd
Gostrey House
Union Road
Farnham Surrey GU9 7PT
UNITED KINGDOM
Telephone +44 1252 717 272
Facsimile +44 1252 717 337
uksales@codan.com.au
12-20021 Issue 7: 10/02
Codan US, Inc.
10660 Wakeman Ct
Manassas VA 20110
USA
Telephone +1 703 361 2721
Facsimile +1 703 361 3812
ussales@codan.com.au
S P E C I F I C A T I O N S
Equipment descriptions and specifications are subject to change without notice or obligation
NGT is a registered trademark of Codan Limited
Frequency range
Transmit 2 to 30 MHz
Receive 250 kHz to 30 MHz
Channel capacity
Up to 400 channels
Operating mode
Single sideband (J3E: USB, LSB, AM)
Transmitted power output
500 W (PEP) system with 125 W (PEP) Stand-by mode
1 kW (PEP) system with 125 W (PEP) Stand-by mode
DC power requirements
125 W 500 W 1 kW
Nominal voltage (DC) 12 V 28 V* 28 V
Transmit J3E:
voice (average) 9 A 30 A
data (typical) 1014 A 70 A
Receive (no signal) 1 A
*From internal supply
AC power requirements
500 W 1 kW
Nominal voltage AC* 110/240 V 240 V
Nominal input VA 1000 3000
Size and weight
500 W system: 605 mm W x 545 mm D x 1345 mm H, 124 kg
1 kW system: 605 mm W x 545 mm D x 1345 mm H, 173 kg

You might also like