You are on page 1of 347

PROGRAMME 2014.

Professional tool solutions.

Contents

EMS
NEW IT. 25
ON PP

Factory and workshop equipment, sets of tools

Spanners

Sockets, Socket sets,


Accessories for manual drives

IMPACT sockets,
Accessories, machine actuated

Torque tools, Torque testers

Screwdrivers

Pliers

Pipe cutters, Hammers, Chisels, Files,


Miscellaneous tools

Pullers

Special automotive tools

10

The new Tool Transport System.


Everything. Accessible. Where it should be.

11, 13, 14

10, 12, 13

TTS Premium
Meets the need for even more storage space

TTS Basic

1 More

and 97N, this model offers 100% more drawer

The ideal companion on the shop oor


1 More

volume

space large drawer (H 210 mm) for bulky

1 More

tools
1 More

control straight-ahead control provided

by two locking directional castors

convenient drawers mounted in

1 More

full-extension runners
1 More

volume in comparison with the TTS Basic

working space generous worktop

robust stainless steel handle with

reinforced connection to body


1 Impact

16, 17

protection thanks to wrap-around bumpers

28

29

Tool trolley 13217


The professional's choice
1 Extremely

TBT Tool box trolley

1 More

versatile six easily removed

TTS electronic Tool trolley

Save your strength

drawers with transparent lockable

Keep all your tools under control at a glance

1 Safe

covers

1 For

tool box locking system with

unrestricted access to all tool box


1 Convenient,
1 The

1 More

convenient telescopic-handle

and two smooth-running twin castors

functions
fold-away push-handle

perfect complement to the

STAHLWILLE Tool box 13216


2

robust, resilient to loads,

for professional use

to facilitate transport
1 Impressive

weight

storage volume, low

monitoring and verifying tool inventories

in workshops and production facilities


1 Electronic

documentation of all access and

audit steps
1 Intuitive

operator guidance and conguration

The latest torque wrench developments.


More sizes. More power.

Safe and accurate. Even at extreme force levels.


The new 22 x 28 mm insert socket system has been specically developed for larger measuring ranges, and now covers up to 650, 800 and
1000 N m. This system takes even the most extreme loads in its stride
and enables even the highest torques to be applied safely and accurately.

22 x 28 mm adaptor new, reinforced


system
180

1 Tighten

, 18

large torques effortlessly

1 High

long-term durability

1 Slim

tool-mount construction

184

186

714

730D

197-202
730N

Insert tools
Versatile. Robust. Convenient.
1 There

is a broad range of extremely

resilient insert tools designed to match


the new, larger 22 x 28 mm insert
socket system.

The new MANOSKOP 714 AUDIT and accessories.


Perfectly designed tools. Seamless integration.

MANOSKOP 714 AUDIT


Perfect for joint audits
1 Two

714

audit modes (prevail torque and

loosen-tighten)
1 Includes

SENSOMASTER Premium

Audit software package

182, 183

714R

Accessories for MANOSKOP 714


1 Docking

station for transferring tightening

parameters and reading out joint measurements


1 SENSOMASTER

182

Live shows graphs of torque

over time, tightening angle over time, torque


over angle. Data export for further processing
1 SENSOMASTER

Premium Assembly assembly

Docking station

software incorporating many additional


features

181

SENSOMASTER Premium Assembly

SENSOMASTER Live

189
189
211
QuickRelease safety lock
LED lighting for
torque wrenches

Laboratory transducer including


high-grade self-locking precision
plug. Extremely accurate:
max. deviation: 0.5%.

New items in 2014.


Sophisticated. Reliable. Safe.

89

Set
s of

24"
, 61

0m

mj

oin

ted

ope
n-e
nde
d

han

ratc
het
spa
nne
rs i
n ro
ll-u
pw
alle
ts

102

, 11

1/4
", 3
/8"
Qui
ckR
ele
ase
ne
-too
th r
atc
het
s

dle
136

Saf
ety
k

nife
282

281
Tele
sco
pic
stai
nle
ss s
tee
lm
irro
r
283

LED
to

Rat
che
ting
BIT
hol
der
s

rch
es

106

, 16

TOR
XP
LUS
BI
TS

163

IMP
ACT
too
l

s up

to 2

1/2

"

156

-16

More efcient. More productive.


Customer-specic tool solutions: made in Germany.

Global competition is presenting considerable challenges to many fields of


industry. For this reason, companies are being forced to find ways of increasing

AEROSPACE

their productivity and quality to enable them to attract new customers


and retain their existing ones. STAHLWILLE has responded to these needs with
its handtool solutions: developed and manufactured in Germany, they combine
innovative features with tried-and-tested designs and sophisticated
manufacturing processes.
In over 100 countries, enterprises in the fields of aerospace, manufacturing,
transport and power generation place their trust in STAHLWILLE tools: including

INDUSTRY

torque wrenches, spanners, ratchets and torque multipliers, to mention just a few
of the many tools in STAHLWILLE's comprehensive range of products.
By providing innovative products and focussing on customer requirements,
STAHLWILLE has, over several decades, gained an excellent reputation.
Today, the name STAHLWILLE is a byword for:
1 Peak

TRANSPORT

quality developed, traditionally forged and finished in Germany

1 Conscientiously

developed solutions that meet customer-specific needs and

ensure absolute accuracy and quality in maintenance, repair and overhaul (MRO)
environments
1 Innovative

features and practical benefits designed specifically to enhance work

processes and make them safer and more profitable


1 Top-grade

materials crafted to make durable, high-quality tools enabling rapid

return on investment
In short: STAHLWILLE's tool solutions offer more. Thanks to intuitive compilations
of tools, optimised processes, durability and the highest quality standards.

Made in
GERMANY

ENERGY

Accuracy. Tradition. Innovation.


As much then

STAHLWILLE can look back proudly over a heritage that spans more than
150 years. In that time, many generations have followed one core principle
that of manufacturing exclusively high-grade tools that are made in Germany.
1 The

company is founded in 1862 by Eduard Wille .

1 Towards

the end of that century, his sons, Emil and Eduard, take on the

running of the company.


1 STAHLWILLE

develops into a brand that is in demand throughout Europe.

The majority of the products made are exported.


1 By

1914, STAHLWILLE employs no less than 500 employees and 25 trainees and

apprentices.
1 STAHLWILLE

today: a family-owned business with over 500 employees at

three production locations in Germany and many distribution channels abroad.


1 STAHLWILLE

tool solutions are exported to over 100 countries.

...as now.
In many fields of industry, STAHLWILLE is the preferred partner of industrialgrade equipment. Our success is based on three key principles: precision of the
manufacturing processes, accuracy and dependability in use.

CERTIFICAT
DQS GmbH

1 Continuous

checks and process improvements guarantee you and your customers

entsystemen
IQNet and
ng von Managem
aft zur Zertifizieru
Deutsche Gesellsch
that the company
hereby certify

Group
STAHLWILLE

& Co.
fabrik GmbH
SWM Werkzeug Schmiede
Bereich
Stiller Berg 32-34 erg
h-Hallenb
98587 Steinbac

KG
GmbH & Co.
l
Eduard Wille
27, 42349 Wupperta
Lindenallee
id
42857 Remsche

Lange Str. 40-56,

the highest achievable quality standards throughout the supply chain.

ted and maintains


has implemen

Development,

a Quality

Management

Scope:
& distribution
manufacture

KG

System.

of tools

ent
the managem
was verified that
in a report, it
standard:
documented
the following
Through an audit, fulfills the requirements of

system

ISO 9001 : 2008

1 Thanks

to our continuous improvement processes, applied to individual tools,

our tool selections and our storage solutions, we are in a position to provide the
best possible products for every application.
1 Our

n
Date of certificatio
Valid until

2012-06-01
2015-05-31

: DE-000018
Registration Number

QM08

Michael Drechsel GmbH


of DQS
Managing Directorof IQNet
President
Cyprus
Portugal CCC
IQNet Partners*:
Mexico APCER
DS Denmark
Belgium ANCE
GmbH Germany Tunisia
International
DQS Holding
INNORPI
France AIB-Vinotte
Cro Cert Croatia
Ireland
IMNC Mexico
AFNOR Certification CQS Czech Republic
AS Norway NSAI
ICONTEC Colombia
China
AENOR Spain
MA Venezuela Korea MSZT Hungary Nemko l Malaysia SQS Switzerland
China CQM
FONDONOR
CISQ Italy CQC
Japan KFQ
FCAV Brazil
QAS Internationa
Argentina JQA
ELOT Greece
Slovenia SIRIM
YUQS Serbia
Finland IRAM
SII Israel SIQ
TSE Turkey
Inc.
Inspecta Certification
Austria RR Russia St Petersburg Russia
GmbH and NSAI
Quality Austria
TEST
rtification.com
CISQ, DQS Holding
PCBC Poland
SRAC Romania
Certification,
under www.iqnet-ce
* The list of IQNet

AFNOR
is available
in the USA by:
Updated information
IQNet is represented
issue of this certificate.
at the time of

partners is valid

in-house DAkkS calibration laboratory is registered to DIN EN ISO/IEC

17025:2005 with the German Accreditation Service (DAkkS) and meets all the
technical specifications for testing laboratories prescribed in ISO/TS 16949 and
national standard DIN EN ISO 9001:2008.
1 The

German Federal Physics Institute (PTB) in Braunschweig regularly

examines all the transfer torque wrenches and torque transducers in use at
STAHLWILLE's DAkkS calibration laboratory.

Accountability and efficiency at its best.


The Tool Control System.
Everything in its place and a place for everything. A working environment with
interdependent processes and tight schedules requires sophisticated, intelligent
and intuitive tool storage. The same holds true for safety-critical maintenance
operations, such as aerospace and food processing plants.
The STAHLWILLE Tool Control System combines the highest degree of safety
and efficiency with the confidence that no tool is left where it may pose a
security risk.
Originally developed for the aerospace industry together with leading aerospace
manufacturers, the award-winning STAHLWILLE Tool Control System gives you
control over your tools and ensures a high level of organisation and security.

1/3 tray

2/3 tray

3/3 tray

The tray mats are


available in a variety
of standard sizes.

The use of the signal colour yellow

Tools are arranged in chemical-

Choose from the many standard

enables the technician to instantly

resistant durable yet flexible

inlay layouts to create highly

detect if everything is where it

foam inlays.

functional tool sets or let us

should be. If he can see yellow

design against your specific

then there is something wrong!

configuration.

Factory and workshop equipment, sets of tools

Factory and workshop equipment, sets of tools

More content. More efciency.


STAHLWILLE TTS Basic.
1
The new Tool Transport System (TTS) by STAHLWILLE is the ideal companion on the shop
floor. The high-grade workmanship, sophisticated details and ease of use are just some
of the outstanding features. Even the Basic model of the tool trolley has the following
equipment level:

Both versions with


6, 7 or 8 drawers

10

More space large drawer (H 210 mm) for bulky tools

More security central locking with a cylinder lock; drawers individually

More robust stainless steel handle with reinforced connection to body

More rigid multiple reinforcing sheet bends

More convenient drawers mounted in full-extension runners

More versatile perforations from both sides (10 x 10 mm), e.g. for larger tools

lockable

shock-absorbing impact protection strips

More room. More options.


STAHLWILLE TTS Premium.
1
If you need a larger worktop and more space for storing tools and parts, the Premium
trolley will fit the bill. In addition to the equipment level in the Basic model, the Premium
version has these product features:

Drawer size

TTS Basic

TTS Premium

More space in comparison with the TTS Basic, this model offers

More surface area generous worktop

More smooth-running four ball-bearing mounted, swivelling castors with low

Full-extension telescopic drawer runners with ball bearings

100% more drawer volume

rolling resistance. Two lockable castors enable easy straight-ahead travel

11

Factory and workshop equipment, sets of tools

Tool trolleys, Tool boxes, Workbenches and accessories


91B/6

Tool trolleys TTS Basic

91B/7

Tool trolleys TTS Basic

1 6 locking, easily removable drawers mounted in full-extension runners


1 Stainless steel handle with reinforced connection to body
1 Impact protection strips with the wrap-around bumper
1 Central locking with a cylinder lock and fold-down key; a master key is
available
1 Also available with an electronic lock (price on request)
1 Paper roll and spray-can holders
1 Oil and acid resistant wheels (O 125 mm), 2 parking brakes
1 Large drawer (210 mm high) for bulky tools
1 Perforations from both sides for hooks No 8031-8041, e.g. for larger tools
1 Extremely resistant to torsional forces, thanks to multiple reinforcing
sheet bends
1 Topple-proof it is not possible to pull out more than one drawer at a
time
1 Can be enhanced with STAHLWILLE Standard and TCS inlays (refer to
pp. 44-69)
1 Extensive range of accessories (refer to pp. 12, 13, 15, 17).

1 7 locking, easily removable drawers mounted in full-extension runners


1 Stainless steel handle with reinforced connection to body
1 Impact protection strips with the wrap-around bumper
1 Central locking with a cylinder lock and fold-down key; a master key is
available
1 Also available with an electronic lock (price on request)
1 Paper roll and spray-can holders
1 Oil and acid resistant wheels (O 125 mm), 2 parking brakes
1 Perforations from both sides for hooks No 8031-8041, e.g. for larger tools
1 Extremely resistant to torsional forces, thanks to multiple reinforcing
sheet bends
1 Topple-proof it is not possible to pull out more than one drawer at a
time
1 Can be enhanced with STAHLWILLE Standard and TCS inlays (refer to
pp. 44-69)
1 Extensive range of accessories (refer to pp. 12, 13, 15, 17).

494
mm

494
mm

355 mm

355 mm

862
mm

862
mm
530 x 350 x 70 mm

957
mm

530 x 350 x 70 mm
957
mm

530 x 350 x 140 mm


530 x 350 x 210 mm

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

'

530 x 350 x 140 mm

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

'

Code

No

Colour

81 18 00 01
81 18 00 02
81 18 00 03
81 18 00 04

91B/6G
91B/6R
91B/6B
91B/6A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

51.5
51.5
51.5
51.5

81 18 00 05
81 18 00 06

91B/6S
91B/6W

black, RAL 9005


white, RAL 9010

51.5
51.5

'

'

913/3B

kg

No

Colour

1219.00
1219.00
1219.00
1219.00

81 18 00 07
81 18 00 08
81 18 00 09
81 18 00 10

91B/7G
91B/7R
91B/7B
91B/7A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

55.5
55.5
55.5
55.5

1272.00
1272.00
1272.00
1272.00

1219.00
1219.00

81 18 00 11
81 18 00 12

91B/7S
91B/7W

black, RAL 9005


white, RAL 9010

55.5
55.5

1272.00
1272.00

'

'

Multifunctional back panel TTS Basic

AB 91B

Perforated panel for attaching to worktop


for mounting drawings and dockets using
magnets or for hanging tools with hooks
No 8031 to 8041. Consists of:
2 rectangular section tubes and
1 perforated panel for screw-fitting,
silver-coloured lacquer.

Capacity approx. 9 l.

'

'

Code

for No

89 01 00 33

91B

'

12

kg

Rubbish bin TTS Basic

'

Code

mm
762 x 27 x 755

R
kg

4.6

Code

for No

89 01 00 52

91B

'

198.00

'

mm
302 x 133 x 320

R
kg

2.1

74.00

91B/8

Tool trolleys TTS Basic

91P/6

Tool trolleys TTS Premium

1 8 locking, easily removable drawers mounted in full-extension runners


1 Stainless steel handle with reinforced connection to body
1 Impact protection strips with the wrap-around bumper
1 Central locking with a cylinder lock and fold-down key; a master key is
available
1 Also available with an electronic lock (price on request)
1 Paper roll and spray-can holders
1 Oil and acid resistant wheels (O 125 mm), 2 parking brakes
1 Perforations from both sides for hooks No 8031-8041, e.g. for larger tools
1 Extremely resistant to torsional forces, thanks to multiple reinforcing
sheet bends
1 Topple-proof it is not possible to pull out more than one drawer at a
time
1 Can be enhanced with STAHLWILLE Standard and TCS inlays (refer to
pp. 44-69)
1 Extensive range of accessories (refer to pp. 12, 13, 15, 17).

1 In comparison with the TTS Basic and 97N, this model offers 100% more
drawer volume
1 Generous worktop and tray
1 6 locking, easily removable drawers mounted in full extension rails with
bearing cage guidance
1 Stainless steel handles on both sides with reinforced connections to the main body
1 Impact protection strips with the wrap-around bumper
1 Central locking with a cylinder lock and fold-down key; a master key is available
1 Also available with an electronic lock (price on request)
1 Paper roll holder
1 Four ball-bearing mounted, swivelling, oil and acid resistant low-friction castors
(O 125 mm), two parking brakes, straight-ahead control is provided by two
locking directional castors
1 Large drawer (210 mm high) for bulky tools
1 Perforations from both sides for Hooks No 8031-8041, e.g. for larger tools
1 Extremely resistant to torsional forces, thanks to multiple reinforcing sheet
bends
1 Topple-proof it is not possible to pull out more than one drawer at a time
1 Can be enhanced with STAHLWILLE Standard and TCS inlays (refer to pp. 44-69)
1 Extensive range of accessories (refer to pp. 13-15, 17).

494
mm

650
mm

355 mm
570 mm

862
mm

1077
mm

530 x 350 x 70 mm
957
mm

700 x 530 x 70 mm
957
mm

530 x 350 x 140 mm

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

'

No

Colour

81 18 00 13
81 18 00 14
81 18 00 15
81 18 00 16

91B/8G
91B/8R
91B/8B
91B/8A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

60
60
60
60

81 18 00 17
81 18 00 18

91B/8S
91B/8W

black, RAL 9005


white, RAL 9010

60
60

'

'

SCH 91B

kg

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

No

Colour

1339.00
1339.00
1339.00
1339.00

81 19 00 01
81 19 00 02
81 19 00 03
81 19 00 04

91P/6G
91P/6R
91P/6B
91P/6A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

101
101
101
101

2091.00
2091.00
2091.00
2091.00

1339.00
1339.00

81 19 00 05
81 19 00 06

91P/6S
91P/6W

black, RAL 9005


white, RAL 9010

101
101

2091.00
2091.00

'

'

Drawers, TTS Basic

913/3P

kg

Multifunctional back panel TTS Premium

U
Perforated panel for attaching to
worktop for mounting drawings and
dockets using magnets or for
hanging tools with hooks No 8031
to 8041. Consists of:
2 rectangular section tubes and
1 perforated panel for screw-fitting,
silver-coloured lacquer.

'

Code

size Colour

Dimensions
mm

for No

81 48 40 70
81 48 50 70
81 48 41 40
81 48 51 40

70S black RAL 9005


70SI silver RAL 9006
140S black RAL 9005
140SI silver RAL 9006

530 x 350 x 70
530 x 350 x 70
530 x 350 x 140
530 x 350 x 140

91B/6; 91B/7; 91B/8


91B/6; 91B/7; 91B/8
91B/6; 91B/7; 91B/8
91B/6; 91B/7; 91B/8

'

Code

81 48 42 10 210S black RAL 9005


81 48 52 10 210SI silver RAL 9006
'

700 x 530 x 210 mm

'

Code

700 x 530 x 140 mm

530 x 350 x 210 91B/6


530 x 350 x 210 91B/6

R
kg
2.5
2.5
3.5
3.5

80.50
80.50
88.50
88.50

5.2 110.00
5.2 110.00

'

Code

for No

89 01 00 34

91P

'

'

mm
978 x 27 x 755

R
kg
8

231.00
13

Factory and workshop equipment, sets of tools


91P/7

Tool trolleys TTS Premium

91P/8

Tool trolleys TTS Premium

1 In comparison with the TTS Basic and 97N, this model offers 100% more
drawer volume
1 Generous worktop and tray
1 7 locking, easily removable drawers mounted in full extension rails with
bearing cage guidance
1 Stainless steel handles on both sides with reinforced connections to the main
body
1 Impact protection strips with the wrap-around bumper
1 Central locking with a cylinder lock and fold-down key; a master key is available
1 Also available with an electronic lock (price on request)
1 Paper roll holder
1 Four ball-bearing mounted, swivelling, oil and acid resistant low-friction
castors (O 125 mm), two parking brakes, straight-ahead control is provided by
two locking directional castors
1 Perforations from both sides for Hooks No 8031-8041, e.g. for larger tools
1 Extremely resistant to torsional forces, thanks to multiple reinforcing sheet
bends
1 Topple-proof it is not possible to pull out more than one drawer at a time
1 Can be enhanced with STAHLWILLE Standard and TCS inlays (refer to pp. 44-69)
1 Extensive range of accessories (refer to pp. 13-15, 17).

1 In comparison with the TTS Basic and 97N, this model offers 100% more
drawer volume
1 Generous worktop and tray
1 8 locking, easily removable drawers mounted in full extension rails with
bearing cage guidance
1 Stainless steel handles on both sides with reinforced connections to the main
body
1 Impact protection strips with the wrap-around bumper
1 Central locking with a cylinder lock and fold-down key; a master key is available
1 Also available with an electronic lock (price on request)
1 Paper roll holder
1 Four ball-bearing mounted, swivelling, oil and acid resistant low-friction
castors (O 125 mm), two parking brakes, straight-ahead control is provided by
two locking directional castors
1 Perforations from both sides for Hooks No 8031-8041, e.g. for larger tools
1 Extremely resistant to torsional forces, thanks to multiple reinforcing sheet
bends
1 Topple-proof it is not possible to pull out more than one drawer at a time
1 Can be enhanced with STAHLWILLE Standard and TCS inlays (refer to pp. 44-69)
1 Extensive range of accessories (refer to pp. 13-15, 17).

650
mm

650
mm

570 mm

570 mm

1077
mm

1077
mm
700 x 530 x 70 mm

957
mm

700 x 530 x 70 mm
957
mm

700 x 530 x 140 mm

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

'

700 x 530 x 140 mm

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

'

Code

No

Colour

81 19 00 07
81 19 00 08
81 19 00 09
81 19 00 10

91P/7G
91P/7R
91P/7B
91P/7A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

106
106
106
106

81 19 00 11
81 19 00 12

91P/7S
91P/7W

black, RAL 9005


white, RAL 9010

106
106

'

'

AB 91P

kg

Code

No

Colour

2198.00
2198.00
2198.00
2198.00

81 19 00 13
81 19 00 14
81 19 00 15
81 19 00 16

91P/8G
91P/8R
91P/8B
91P/8A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

108
108
108
108

2306.00
2306.00
2306.00
2306.00

2198.00
2198.00

81 19 00 17
81 19 00 18

91P/8S
91P/8W

black, RAL 9005


white, RAL 9010

108
108

2306.00
2306.00

'

'

Rubbish bin TTS Premium

SCH 91P

kg

Drawers, TTS Premium

Capacity approx. 14 l.

multiple reinforcing sheet bends


ensure high rigidity.

'

Code

size Colour

Dimensions
mm

for No

81 48 60 70
81 48 70 70
81 48 61 40
81 48 71 40

70S black RAL 9005


70SI silver RAL 9006
140S black RAL 9005
140SI silver RAL 9006

700 x 530 x 70
700 x 530 x 70
700 x 530 x 140
700 x 530 x 140

91P/6; 91P/7; 91P/8


91P/6; 91P/7; 91P/8
91P/6; 91P/7; 91P/8
91P/6; 91P/7; 91P/8

'

'

Code

for No

89 01 00 53

91P

'

'

mm
456 x 150 x 370

R
kg
3

79.00

81 48 62 10 210S black RAL 9005


81 48 72 10 210SI silver RAL 9006
'

14

700 x 530 x 210 91P/6


700 x 530 x 210 91P/6

R
kg
4.2
4.2
5.9
5.9

116.00
116.00
137.00
137.00

6.8 150.00
6.8 150.00

913/1B

Multiplex beechwood worktop, TTS Basic

U
Code

for No

89 01 00 28

91B

'

Set of wheels, TTS Basic

U
optional, consists of:
4 swivelling castors,
2 with parking brakes,
2 with directional lock.

'

'

R 91B

913/1P

mm
698 x 360 x 18

R
kg

3.35 159.00

Multiplex beechwood worktop,


TTS Premium

'

Code

for No

89 48 00 02

91B

'

'

R
kg

4.3

106.00

'

Code

for No

89 01 00 29

91P

'

'

913/1PA

mm
914 x 514 x 18

R 91P

kg

4.75 182.00

Multiplex beechwood worktop with


stainless steel inlay, TTS Premium

Set of wheels, TTS Premium

U
consists of:
4 ball-bearing mounted,
smooth-running swivelling
castors,
2 with parking brakes,
2 with directional locks.

'

Code

for No

89 01 00 30

91P

'

'

mm
914 x 514 x 18

R
kg

4.75 256.00
'

SK 91B

Side cabinet, TTS Basic

Code

for No

89 48 00 03

91P

'

'

with interchangeable stop. Lockable with


fold-out key.

913/2BP

R
kg
5

167.00

Swivelling tray,
TTS Basic/Premium

U
e.g. for a laptop.

'

Code

for No

89 01 00 37

91B; 91P

'

'

Code

for No

89 01 00 50

91B

'

'

912

mm
302 x 130 x 740

'

R
kg

4.5

Empty tray for small components

for No

83 81 20 70

91B; 91P; 92KM G; 94N; 94N/KM; 97N;


97N/KM; 97H/8; 97H/KM; 920; 922N

'

kg

2.76 132.00

Drawer separators

'

Code
'

mm
520 x 340 x 30

R
g

330

for No

81 48 40 01 91B; 91P; 92KM G; 94N;


94N/KM; 97N; 97N/KM;
97H/8; 97H/KM; 920; 922N

'

Code

420 x 305 x 340

allow you to divide up the drawer the


way you need it.
Consisting of: one each galvanised
steel front and back piece and three
separators.

with compartments for small parts


such as screws, nuts etc.
Oil and Skydrol resistant.
8 compartments each 60 x 80 mm or
80 x 80 mm,
2 compartments each 100 x 165 mm
or 50 x 330 mm.

'

VE 50-150

205.00

mm

'

mm

530 x 350 x 40

R
kg

0.8

22.20

18.40

15

Factory and workshop equipment, sets of tools

More practical. More security.


TTS electronic Tool trolley
1
Our TTS Tool Trolley family has been extended by the addition of a new model with
semi-automatic access and inventory controls. In contrast to fully automated solutions,
this system features minimum complexity and excellent ease-of-use. It is designed to put
responsibility where it belongs: in the hands of the user.

R I S F OR E I

OBJECT D

AGE FORE
AM

GN

IG

EB

FOD
N OBJECT D

Secure if a tool is missing or faulty, administrator access is required.

Model TTS electronic with access controls, access logging and completeness

Model TTS electronic M with monitor and comprehensive audit functions

Indicator lamps using trafc-light colours display the current status

checks

such as displays of the contents of the drawers and identication of the status of
individual tools. Additional software may also be installed

16

Innovative login via RFID chip provides access to individually enabled drawers

Dependable low complexity boosts acceptance among users and reduces risk of

Independent thanks to integrated stand-by power supply

Versatile both models available in a choice of six colours

and audit functions

incorrect use

91/6 TTS
electronic

TTS Premium Tool Trolley with


integrated audit function

91/6 TTS
electronic M

TTS Premium Tool Trolley with


integrated audit function and monitor

For monitoring and verifying tool inventories in workshops and


production facilities
1 With electronic access system and integrated audit function
1 Intuitive operator guidance
1 Easy to configure
1 Electronic documentation of all access and audit steps.
1 Central parking brake and directional lock using two pedals.

Comparable with 91/6 TTS electronic, but without the monitor


1 Sturdy industrial PC system with an impact-resistant 15" touchscreen
1 Contents of drawer are displayed when the drawer is opened
1 Other software can also be used on the system - please enquire
1 It is possible to view vehicle or plane manuals or assembly instructions
or to run measuring equipment software.

650
mm

650
mm

570 mm

570 mm

1077
mm

1077
mm
700 x 530 x 70 mm

957
mm

700 x 530 x 70 mm
957
mm

700 x 530 x 140 mm


700 x 530 x 210 mm

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

'

700 x 530 x 140 mm


700 x 530 x 210 mm

STAHLWILLE green

RAL 2703035

RAL 9005

RAL 3020

RAL 7016

RAL 9010

'

Code
'

No

Colour

kg

81 17 11 01 91/6 TTS electronic G green


81 17 11 02 91/6 TTS electronic R red, RAL 3020
81 17 11 03 91/6 TTS electronic B blue,
RAL 2703035
81 17 11 04 91/6 TTS electronic A charcoal grey,
RAL 7016

Code
'

124
124
124

Price on request
Price on request
Price on request

124

Price on request

81 17 11 05 91/6 TTS electronic S black, RAL 9005 124


81 17 11 06 91/6 TTS electronic W white, RAL 9010 124

Colour

kg

81 17 11 07 91/6 TTS electronic M G green


81 17 11 08 91/6 TTS electronic M R red, RAL 3020
81 17 11 09 91/6 TTS electronic M B blue,
RAL 2703035
81 17 11 10 91/6 TTS electronic M A charcoal grey,
RAL 7016

129 Price on request


129 Price on request
129 Price on request
129 Price on request

Price on request
Price on request

'

KH 91

No

81 17 11 11 91/6 TTS electronic M S black, RAL 9005 129 Price on request


81 17 11 12 91/6 TTS electronic M W white, RAL 9010 129 Price on request
'

Cable holder, TTS Basic/Premium

SK 91P

Side cabinet, TTS Premium

for storing cable and hoses.

with interchangeable stop.


Lockable with fold-out key.

'

Code

for No

89 01 00 40

91B; 91P

'

'

SDH 91P

mm
200 x 153 x 170

R
kg

0.75

40.10

Spray-can holder, TTS Premium

'

for 6 spray-cans and


7 screwdrivers.

Code

for No

89 01 00 51

91P

'

'

mm
457 x 145 x 624

R
kg

5.5

198.00

'

Code

for No

89 01 00 49

91P

'

'

R
kg

2.14

39.60
17

Factory and workshop equipment, sets of tools

Made-to-measure for workshop professionals.


The right version for every application.
1

Compact, sturdy outer housing enables numerous different congurations, each


in 4 colours this exceptionally exible range of STAHLWILLE Tool Trolleys
leaves nothing to be desired! This modular system, where the Tool Trolleys can
have from 6 to 10 drawers and a range of heights, enables you to congure your
STAHLWILLE Tool Trolleys to meet your own specic needs.
To maximise efciency, t the drawers with the STAHLWILLE Tool Control System
or corresponding standard ABS inlays. Exploit the convenient choice of
accessories such as the rubbish bin, multifunctional back panel etc. to enhance the
already generous standard equipment and create your own personal workspace.

Product benets at a glance:


1 Double-bearing
12

wheels, oil and acid-resistant

parking brakes

1 Fully

extendible drawers, simply lift to lock in place

1 Removable

drawers

1 Smooth-action
1 Subdivided
1 Cylinder

rollers

worktop

lock at side to provide central locking

1 Topple-proof

it is not possible to pull out more than one drawer at a time

1 Can

be equipped with STAHLWILLE Standard and Tool Control System inlays

1 Can

be combined with Tool box No 94

14

colour options:

STAHLWILLE Green

RAL 3020

RAL 2703035

RAL 7016

18

Tool trolley No 97N/6KM

The modular tool tray system


Tool trays from STAHLWILLE ensure perfect tool management within
the Tool Trolley. All the tools are neatly arranged and instantly at hand,
and always securely held in the same place.

Additional tray No 913/2


extends the worktop

Multifunctional back panel


No 913/3 ensures a tidy
workspace

Spray-can holder

The wheels on the Tool Trolley


enable easy manoeuvring even
when heavily loaded

Got your drawers organised?


With our Tool Control System,
the tools are arranged in
chemical-resistant special foam
inlays with three-dimensional cutouts. The signal colour is yellow.
A quick glance at the tray shows
the service technician instantly
if everything is where it should
be. If he can see yellow theres
something wrong!

19

Factory and workshop equipment, sets of tools


97N/6KM

Tool trolleys

97N/7KM

registered design, with solid multi-purpose worktop No 913/1, plastic


handles on the drawers and impact protection strips on the vertical edges,
fitted with double-bearing wheels, oil and acid-resistant, 2 parking brakes
and 6 removable drawers mounted on smooth-action rollers, fully
extendible drawers, simply lift to lock in place. Topple-proof - it is not
possible to pull out more than one drawer at a time. Holders for paper
rolls and spray cans. Can be enhanced with STAHLWILLE standard and
TCS inlays (see pp. 4469). Central locking thanks to the laterally-mounted
cylinder lock. Can be combined with Tool boxes No 94N and No 94N/KM.
Can also be enhanced using additional tray No 913/2 and multifunctional
back panel No 913/3 (please order separately).

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

Tool trolleys

registered design, with solid multi-purpose worktop No 913/1, plastic


handles on the drawers and impact protection strips on the vertical edges,
fitted with double-bearing wheels, oil and acid-resistant, 2 parking brakes
and 7 removable drawers mounted on smooth-action rollers, fully
extendible drawers, simply lift to lock in place. Topple-proof - it is not
possible to pull out more than one drawer at a time. Holders for paper
rolls and spray cans. Can be enhanced with STAHLWILLE standard and
TCS inlays (see pp. 4469). Central locking thanks to the laterally-mounted
cylinder lock. Can be combined with Tool boxes No 94N and No 94N/KM.
Can also be enhanced using additional tray No 913/2 and multifunctional
back panel No 913/3 (please order separately).

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

Code

No

Colour

81 16 00 04
81 16 00 05
81 16 00 06
81 16 00 40

97N/6KM G
97N/6KM R
97N/6KM B
97N/6KM A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

'

97N/6

kg

49.2
49.2
49.2
49.2

1065.00
1065.00
1065.00
1065.00

No

Colour

81 16 00 10
81 16 00 11
81 16 00 12
81 16 00 57

97N/7KM G
97N/7KM R
97N/7KM B
97N/7KM A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

Tool trolleys

97N/7

registered design, with double-bearing, oil and acid-resistant wheels,


2 parking brakes and 6 removable drawers mounted on smooth-action
rollers, fully extendible drawers, simply lift to lock in place. Topple-proof it is not possible to pull out more than one drawer at a time. Holders for
spray cans and paper rolls. Divided work area. Can be enhanced with
STAHLWILLE standard and TCS inlays (see pp. 4469). Central locking
thanks to the laterally-mounted cylinder lock. May be combined with Tool
boxes No 94N and No 94N/KM.

Code
'

kg

51.4
51.4
51.4
51.4

1123.00
1123.00
1123.00
1123.00

Tool trolleys

registered design, with double-bearing, oil and acid-resistant wheels,


2 parking brakes and 7 removable drawers mounted on smooth-action
rollers, fully extendible drawers, simply lift to lock in place. Topple-proof it is not possible to pull out more than one drawer at a time. Holders for
spray cans and paper rolls. Divided work area. Can be enhanced with
STAHLWILLE standard and TCS inlays (see pp. 4469). Central locking
thanks to the laterally-mounted cylinder lock. May be combined with Tool
boxes No 94N and No 94N/KM.

443
mm
338 mm

278 x 120 x 70 mm

677
mm
530 x 350 x 80 mm
530 x 350 x 100 mm
917
mm

530 x 350 x 120 mm


530 x 350 x 140 mm

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

Code

No

Colour

81 16 00 01
81 16 00 02
81 16 00 03
81 16 00 58

97N/6G
97N/6R
97N/6B
97N/6A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

'

20

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

R
kg

47.7
47.7
47.7
47.7

Code

No

Colour

81 16 00 07
81 16 00 08
81 16 00 09
81 16 00 59

97N/7G
97N/7R
97N/7B
97N/7A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

885.00
885.00
885.00
885.00

'

R
kg

49.9
49.9
49.9
49.9

943.00
943.00
943.00
943.00

97N/8KM

Tool trolleys

97H/8KM

registered design, with solid multi-purpose worktop No 913/1, plastic


handles on the drawers and impact protection strips on the vertical edges,
fitted with double-bearing wheels, oil and acid-resistant, 2 parking brakes
and 8 removable drawers mounted on smooth-action rollers, fully
extendible drawers, simply lift to lock in place. Topple-proof - it is not
possible to pull out more than one drawer at a time. Holders for paper
rolls and spray cans. Can be enhanced with STAHLWILLE standard and
TCS inlays (see pp. 4469). Central locking thanks to the laterally-mounted
cylinder lock. Can be combined with Tool boxes No 94N and No 94N/KM.
Can also be enhanced using additional tray No 913/2 and multifunctional
back panel No 913/3 (please order separately).

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

Code

No

Colour

81 16 00 16
81 16 00 17
81 16 00 18
81 16 00 41

97N/8KM G
97N/8KM R
97N/8KM B
97N/8KM A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

'

97N/8

kg

53.5
53.5
53.5
53.5

1198.00
1198.00
1198.00
1198.00

Colour

81 16 00 36
81 16 00 37
81 16 00 38
81 16 00 35

97H/8KM G
97H/8KM R
97H/8KM B
97H/8KM A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

Tool trolleys

STAHLWILLE green

97H/8

RAL 3020

RAL 2703035

kg

56.8
56.8
56.8
56.8

1261.00
1261.00
1261.00
1261.00

Tool trolleys

registered design, with smooth-running plastic castors, 2 locking brakes


and 8 removable drawers mounted on smooth-action rollers, fully
extendible drawers, simply lift to lock in place. Topple-proof - it is not
possible to pull out more than one drawer at a time. Holders for spray
cans and paper rolls. Divided work area. Can be enhanced with
STAHLWILLE standard and TCS inlays (see pp. 4469). Side wall space can
be individually optimised using the square-hole perforations and hooks
No 80318041. Central locking thanks to the laterally-mounted cylinder
lock. May be combined with Tool boxes No 94N and No 94N/KM.

RAL 7016

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

Code

No

Colour

81 16 00 13
81 16 00 14
81 16 00 15
81 16 00 60

97N/8G
97N/8R
97N/8B
97N/8A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

No

'

'

Code
'

registered design, with double-bearing, oil and acid-resistant wheels,


2 parking brakes and 8 removable drawers mounted on smooth-action
rollers, fully extendible drawers, simply lift to lock in place. Topple-proof it is not possible to pull out more than one drawer at a time. Holders for
spray cans and paper rolls. Divided work area. Can be enhanced with
STAHLWILLE standard and TCS inlays (see pp. 4469). Central locking
thanks to the laterally-mounted cylinder lock. May be combined with Tool
boxes No 94N and No 94N/KM.

'

Tool trolleys

registered design, with solid multi-purpose worktop No 913/1, plastic handles on


the drawers and impact protection strips on the vertical edges, with smoothrunning plastic castors, 2 locking brakes and 8 removable drawers mounted on
smooth-action rollers, fully extendible drawers, simply lift to lock in place.
Topple-proof - it is not possible to pull out more than one drawer at a time.
Holders for spray cans and paper rolls. Can be enhanced with STAHLWILLE
standard and TCS inlays (see pp. 4469). Side wall space can be individually
optimised using the square-hole perforations and hooks No 80318041. Central
locking thanks to the laterally-mounted cylinder lock. May be combined with
Tool boxes No 94N and No 94N/KM. Can also be enhanced using additional tray
No 913/2 and multifunctional back panel No 913/3 (please order separately).

R
kg

51.7
51.7
51.7
51.7

Code

No

Colour

81 16 00 31
81 16 00 32
81 16 00 33
81 16 00 61

97H/8G
97H/8R
97H/8B
97H/8A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

1007.00
1007.00
1007.00
1007.00

'

R
kg

55
55
55
55

1045.00
1045.00
1045.00
1045.00
21

Factory and workshop equipment, sets of tools


97H/10KM

Tool trolleys

94N/KM

registered design, with solid multi-purpose worktop No 913/1, plastic


handles on the drawers and impact protection strips on the vertical edges,
with smooth-running plastic castors, 2 locking brakes and 10 removable
drawers mounted on smooth-action rollers, fully extendible drawers,
simply lift to lock in place. Topple-proof - it is not possible to pull out
more than one drawer at a time. Holders for spray cans and paper rolls.
Can be enhanced with STAHLWILLE standard and TCS inlays
(see pp. 4469). Side wall space can be individually optimised using the
square-hole perforations and hooks No 80318041. Central locking
thanks to the laterally-mounted cylinder lock. May be combined with Tool
boxes No 94N and No 94N/KM. Can also be enhanced using additional
tray No 913/2 and multifunctional back panel No 913/3 (please order
separately).

Tool boxes

with plastic handle on the drawers and impact protection strips on the
vertical edges and with 5 removable drawers on smooth-action rollers,
fully extendible drawers, simply lift to lock in place. Handles integrated in
side walls. Central locking thanks to the laterally-mounted cylinder lock.
Can be enhanced with STAHLWILLE standard and TCS inlays
(see pp. 4469). Can also be mounted on Tool trolleys No 97N, No 97H,
Wheely box No 922N.

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

No

Colour

81 43 00 17
81 43 00 18
81 43 00 19
81 43 00 07

94N/KM G
94N/KM R
94N/KM B
94N/KM A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

'

STAHLWILLE green

RAL 3020

RAL 2703035

Code

No

Colour

81 16 00 54
81 16 00 55
81 16 00 56
81 16 00 62

97H/10KM G
97H/10KM R
97H/10KM B
97H/10KM A

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

'

94N

RAL 7016

'

R
kg

63.5
63.5
63.5
63.5

1428.00
1428.00
1428.00
1428.00

Code

kg

35.5
35.5
35.5
35.5

712.00
712.00
712.00
712.00

Tool boxes

5 removable drawers on smooth-action rollers, fully extendible drawers,


simply lift to lock in place. Handles integrated in side walls. Can be
enhanced with STAHLWILLE standard and TCS inlays (see pp. 4469).
Central locking thanks to the laterally-mounted cylinder lock. Can also be
mounted on Tool trolleys No 97N, No 97H/8, Wheely box No 922N.

STAHLWILLE green

RAL 3020

RAL 2703035

RAL 7016

'

Code

No

Colour

81 43 00 01
81 43 00 02
81 43 00 03
81 43 00 08

94NG
94NR
94NB
94NA

green
red, RAL 3020
blue, RAL 2703035
charcoal grey, RAL 7016

'

'

22

R
kg

32.5
32.5
32.5
32.5

626.00
626.00
626.00
626.00

92KM G

Mobile workbench

Drawers

with 4 smooth-running plastic wheels, of which 2 are swivelling and have


parking brakes; 7 removable drawers with plastic handles, smooth-action
rollers, fully extendible drawers, simply lift to lock in place, holders for
paper rolls and spray cans, 30 mm multiplex beechwood worktop. Roomy
storage area with a shelf in the cabinet, drawers and access door to
storage area, each individually lockable with a cylinder lock. One outer
side can be individually adapted to suit requirements using perforated
sheets with square holes for hooks No 80318041. Can be enhanced with
STAHLWILLE standard and TCS inlays (see pp. 4469).

coated with environmentally


friendly silver-coloured textured
powder-coat.

'

Code

No

Dimensions
mm

Can be combined
with No

81 48 20 60
81 48 20 80

SCH 60
SCH 80

530 x 350 x 60
530 x 350 x 80

81 48 21 00
81 48 21 20

SCH 100
SCH 120

530 x 350 x 100


530 x 350 x 120

94N; 97N/7; 97N/8; 922N


94N; 97N/6; 97N/8; 97H/8;
920; 922N
97N/6; 97N/7; 97N/8; 97H/8
97N/6; 97N/7; 97N/8; 97H/8;
920

SCH 140

530 x 350 x 140

97N/6; 97N/7; 97H/8

'

81 48 21 40
'

R
kg

2.4

73.50

2.8
3.1

75.50
76.00

3.2

76.50

3.5

80.50

Drawers with plastic handles


coated with environmentally
friendly silver-coloured textured
powder-coat.

'

Code

kg

'

85 01 00 14

73.0

'

96/3

2014.00

Mobile workbench

with chassis and retractable tool panel. 5 ball-bearing mounted steel


drawers with slotted liners for partitioning drawers.
Aluminium handle. Automatic catches on all drawers prevent them
opening in transit. Lockup cabinet with height-adjustable shelf. Worktop is
50 mm thick, warp- and water resistant, multilayer bonded beech wood
with clear varnish finish.
Front edge has hardwood edging strip.

'

Dimensions
mm

Code

No

81 48 30 60

SCH 60KM 530 x 350 x 60

'

81 48 30 80
81 48 31 00
81 48 31 20
1

81 48 31 40
'

910

Can be combined
with No

R
kg

92KM G; 97N/7KM; 97N/8KM;


97H/10KM; 94N/KM
SCH 80KM 530 x 350 x 80 92KM G; 97N/6KM; 97N/8KM;
97H/8KM; 97H/10KM; 94N/KM
SCH 100KM 530 x 350 x 100 97N/6KM; 97N/7KM; 97N/8KM;
97H/8KM; 97H/10KM
SCH 120KM 530 x 350 x 120 92KM G; 97N/6KM; 97N/7KM;
97N/8KM; 97H/8KM; 97H/10KM

2.5

87.50

2.65 88.00
3.3

88.50

3.4

89.00

SCH 140KM 530 x 350 x 140 97N/6KM; 97N/7KM; 97H/8KM 3.6

89.50

Non-slip mat GRIPMAT

protects the tools, prevents them


sliding and rattling.
1 roll will normally be sufficient for
a tool trolley with up to 7 drawers.

'

'

Code

Code

'

kg

'

89 01 00 03
'

85 03 00 03

160

'

3234.00

L
mm

W
mm

3800

370

680

38.90

L = Length, W = Width
'

VE 50-150

Drawer separators

allow you to divide up the drawer


the way you need it.
Consisting of: one each galvanised
steel front and back piece and three
separators.
Separator height = 40 mm.
'

Code
'

for No

mm

81 48 40 01 91B; 91P; 92KM G;


94N; 94N/KM; 97N;
97N/KM; 97H/8;
97H/KM; 920;
922N
530 x 350 x 40
'

R
kg

0.8 22.20

23

Factory and workshop equipment, sets of tools


912

Empty tray for small components

R 920

with compartments for small parts


such as screws, nuts etc.
Oil and Skydrol resistant.
8 compartments each 60 x 80 mm or
80 x 80 mm,
2 compartments each 100 x 165 mm
or 50 x 330 mm.

Set of wheels

Set consists of 2 fixed wheels and


2 pivoting, 125 mm O.
2 wheels with locking brake.

'

Code

for No

83 81 20 70

91B; 91P; 92KM G; 94N;


94N/KM; 97N; 97N/KM;
97H/8; 97H/KM; 920; 922N 520 x 340 x 30

'

'

913

mm

R
g

330

18.40

Cover

'

for No

89 48 00 01

94N; 94N/KM; 97N; 97N/KM; 920; 922N

'

Oil and Skydrol resistant.

'

SDH 921

for No

89 01 00 11

94N; 94N/KM; 97N; 97N/KM;


97H/8; 97H/KM; 920; 922N 680 x 450 x 20

'

'

913/1

mm

kg

4.3

59.00

Spray can and paper roll holder

coated with environmentally


friendly silver-coloured textured
powder-coat.

'

Code

Code

R
g

936

44.10

Multi-purpose worktop

'

for No

81 48 30 01

92KM G; 94N; 94N/KM; 97N;


97N/KM; 97H/8; 97H/KM; 920; 922N

'

Particularly sturdy construction with


robust, two-part handle-bar.
Large worktop and 11 holes for
storing e.g. screwdrivers, files,
scrapers etc. Additional compartments for small components and
2 round recesses for cans. 4 additional holes for mounting the
multifunctional back panel No 913/3.
Oil and Skydrol resistant.

Code

'

AB97N

kg
1

39.20

Rubbish bin for tool trolleys

Capacity approx. 9 l. All painted parts have


an environmentally friendly silver finish
powder coat.

'

Code

for No

89 01 00 22

97N; 97N/KM; 97H/8;


97H/KM; 920; 922N

'

'

913/2

mm
780 x 540 x 35

R
kg

3.1

73.50

Additional tray

slots into and extends the


multipurpose worktop No 913/1.
Oil and Skydrol resistant.

'

Code

for No

89 01 00 12

92KM G; 97N; 97N/KM;


97H/8; 97H/KM

'

'

PB98

'

Code

for No

89 01 00 23

97N; 97N/KM; 97H/8;


97H/KM; 920; 922N

'

'

913/3

mm
443 x 540 x 35

R
kg

2.2

132.00

Multifunctional back panel

Perforated panel for attaching to


multipurpose worktop No 913/1, for
mounting drawings & dockets using
magnets or for hanging tools with hook
sets No 8031 to 8041. Consisting of:
2 uprights for inserting in the base and
perforated panel, silver paint finish.

89 01 00 24
'

24

kg

2.1

58.00

Personal box

'

Code

for No

89 01 00 13

92KM G; 97N; 97N/KM;


97H/8; 97H/KM

'

'

'

278 x 300 x 140

for personal effects. With separate


locking system. Can be bolted to
Tool trolleys built in 2008 or later;
for fitting to older models, 2 holes
will need to be drilled (6.5 mm).
All painted parts have an
environmentally friendly silver
finish powder coat.

'

Code

mm

mm
570 x 365 x 40

R
kg

3.7

157.00

mm
277 x 317 x 115

R
kg

2.4

149.00

G
92
2

92
0

92
KM
N
o

N
o

N
o

97
N
/6
KM
97
N
/6
N
o
97
N
/7
N
KM
o
97
N
/7
N
o
97
N
/8
N
KM
o
97
N
/8
N
o
97
H
/8
N
KM
o
97
H
/8
N
o
97
H
/1
N
0K
o
M
94
N
/K
N
M
o
94
N
N
o

91
P/
8

N
o

91
P/
7

N
o

91
P/
6

N
o

N
o

91
B/
8

91
B/
7

N
o

N
o

N
o

91
B/
6

Accessories Tool Trolleys, Tool Boxes and Mobile Workbench

Drawers
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH
SCH

91B-70S
91B-140S
91B-210S
91B-70SI
91B-140SI
91B-210SI
91P-70S
91P-140S
91P-210S
91P-70SI
91P-140SI
91P-210SI
60
80
100
120
140

1
1

1
1

1
1

1
1

1
1

Drawers
with plastic handles
SCH
SCH
SCH
SCH
SCH

60KM
80KM
100KM
120KM
140KM

1
1

Drawer separators
VE 50-150

Magazine drawer
920C-SCH
Tool magazines
920 C 60
920 C 80
920 C 120

Empty tray for small components


912

Multiplex beechwood worktops


913/1B
913/1P
913/1PA
Worktops
913
913/1
Multifunctional back panel
913/3B
913/3P
913/3 (only in conj. with 913/1)

1
1

Additional tray
913/2
Swivelling tray
913/2BP

Cable holder
KH 91
Spray can holders
SDH 91P
SDH 921

Side cabinets
SK 91B
SK 91P

1
1

Rubbish bin
AB 91B
AB 91P
AB 97N

Lockable personal box


913/2
Set of wheels
R91B
R91P
R920

25

Factory and workshop equipment, sets of tools

CONVERTA
The system and its components
1
The CONVERTA system and its components are a modular system. The system consists
of wheely boxes with drawers or up-and-over doors, magazines with integrated carrying
handles, magazine drawers and magazines and a set of wheels, and detachable spray-can
holders. Thanks to the possibility of combining the many modules available, there are almost
no limits to the options open to the user in optimising his or her individual tool-storage
environment.
All the magazines are positioned on at magazine drawers which can be locked in place
when extended. The tool magazines and standard drawers are interchangeable. A safety
mechanism prevents more than one drawer being opened at any one time.
All the boxes can be tted with a cylinder lock to enable central locking. The boxes can still
be locked even if one or more magazines or drawers have been removed. All painted parts
have an environmentally friendly powdercoat. The worktops of the cases are tted with an
oil and skydrol resistant plastic mat with compartments for small components.
The undersides of the magazines have non-slip lm attached to them.

920 + R 920

26

920 + 922N

920 + 97N/7R

CONVERTA

Accessories CONVERTA

The modular components system


in the aerospace industry (maintenance),
in industry, the trades and all service work in the field
for maintenance and assembly jobs
1
1
1
1

1
1
1
1
1
1
1
1

920 C-SCH

Fully mobile for use anywhere.


Multitalented numerous combination options.
Wheel it or carry it.
Interchangeable drawers and a range of magazines.
Magazines are placed on flat drawers and can be opened easily
when the drawer is pulled out.
The undersides are coated with non-slip, Skydrol and oil resistant
rubber.
The magazine drawers can easily be exchanged for normal drawers
(as with the Tool trolleys and Tool boxes in the full range).
Topple-proof because only one drawer can be opened at any one
time.
Drawers designed to match the STAHLWILLE inlay system.
Can be completely locked using the laterally-mounted cylinder lock
(central locking).
Hanging option for spray-can holders.
Tough worktop made of plastic, oil and Skydrol resistant with
compartments for screws, nuts etc.
Can be combined with Tool trolley No 97.
All painted parts have an environmentally friendly powdercoat.

920

Magazine drawer

Coated with environmentally friendly


silver-coloured textured powder-coat.
For mounting tool magazines
No 920 C.

1
'

Code

kg

'

81 48 10 00

2.64

'

920 C

61.50

Tool magazines

Coated with environmentally friendly


silver-coloured textured powder-coat.
For use with magazine drawers
No 920 C-SCH.

Magazine case

with 5 drawers and 5 magazines. Converts to tool trolley with undercarriage No R 920. Features two removable spray can holders on the end
pieces of the case and two integrated lifting handles. Drawers for
mounting magazines are removable and lockable in fully extended
position. The magazines can be replaced with standard drawers. The
worktop of the case is fitted with an oil and Skydrol resistant plastic mat
with compartments for small components.

'

Code
'

No

Dimensions
mm

Can be combined
with No

R
kg

81 48 10 60 920 C 60 530 x 350 x 48

920; 922N;
92KM G; 94N;
97N/7; 97N/7KM;
97N/8; 97N/8KM;
97H/10KM
3.2 115.00
81 48 10 80 920 C 80 530 x 350 x 68 920; 922N;
92KM G; 94N;
97N/6; 97N/6KM;
97N/8; 97N/8KM;
97H/8; 97H/KM
3.3 116.00
81 48 11 20 920 C 120 530 x 350 x 108 92KM G; 97N/6;
97N/6KM; 97N/7;
97N/7KM; 97N/8;
97N/8KM; 97H/8;
97H/8KM
3.7 126.00

'

Can be combined
with No

Code

Colour

81 48 00 00

red RAL 3020

'

'

922N

R
kg

920; 922N; 94N; 97N;


97N/KM; 97H/8; 97H/KM 53.6

'

1138.00

Wheely box with drawers

With 4 wheels O 125 mm (2 pivoting castors, one wheel with parking


brake). With 5 silver-coloured drawers (sizes: 4 drawers 60 mm high,
1 x 80 mm). Drawers are removable and lockable in fully extended
position. The worktop of the case is fitted with an oil and Skydrol resistant
plastic mat with compartments for small components. Spray can holders
No SDH 921 can be retrofitted to the sides (please order separately).

'

Code

Colour

Can be combined
with No

96 48 00 02

red RAL 3020

920; 94N

37.4

'

'

kg

720.00
27

Factory and workshop equipment, sets of tools

Tool boxes
13217

Tool trolleys

U
1

1 Extremely robust, resilient to loads, for professional use.


1 5 easily removed drawers with transparent lockable covers.
1 Drawers can be inserted in any order.
1 With one top cover and one front cover, both folding.
1 One removable tray with 2 handles and 2 transparent drawer covers
under the top cover.
1 Cover compartment with transparent cover.
1 Separate document pouch in lid.
1 4 places for type plates.

1 2 smooth-running twin castors on the telescopic-handle side.


1 Also available with 4 additional single castors, of which 1 with parking
brake (price on request).
1 Extendible telescopic handle facilitates transport.
1 2 carrying handles at the sides.
1 Resistant to Skydrol, acetone, petrol and hydraulic fluids.
1 Carrying capacity 20 kg.
1 3 locking positions with padlock.
1 Corresponding TCS sets of tools on request.

381
mm

585
mm
467.5 x 255 x 30 mm
457
mm

467.5 x 255 x 60 mm
467.5 x 255 x 95 mm

luminous
orange

luminous
yellow

luminous
red

jet black

'

Code

No

Colour

81 09 13 01
81 09 13 02
81 09 13 04
81 09 13 06

13217 LGE
13217 LOR
13217 LR
13217 TS

luminous yellow
luminous orange
luminous red
jet black

'

'

28

R
kg

15
15
15
15

651.00
651.00
651.00
651.00

13216/2

13216/4

Tool box

with 2 drawers and one compartment under the lid,


safety lock and dip-coated carrying handle on the lid.
Wide, spring-mounted dip-coated carrying handles on
the sides. High-grade, fully extendible sturdy rails.
Easily removable drawers. The perforated panel can
be arranged as required using spring loaded clips No 8050 (page 30,
please order separately).

Tool box

with 4 drawers, a compartment under the lid,


safety lock and sturdy textured aluminium
sheeting on the lid. Wide, spring-mounted dipcoated carrying handles on the sides. High-grade,
fully extendible sturdy rails. Easily removable
drawers.The perforated panel can be arranged as
required using spring loaded clips No 8050
(page 30, please order separately).

230
mm

230
mm

510
mm

510
mm

496 x 210 x 85 mm
467 x 182 x 55 mm

270
mm

415
mm

'

467 x 182 x 80 mm

Code

496 x 210 x 85 mm
467 x 182 x 55 mm

kg

'

'

81 09 10 02

10.3

'

317.00

Code

kg

'

13216/3

81 09 10 04

Tool box

14

'

with 3 drawers and one compartment under the lid,


safety lock and dip-coated carrying handle on the lid.
Wide, spring-mounted dip-coated carrying handles on
the sides. High-grade, fully extendible sturdy rails.
Easily removable drawers.The perforated panel can
be arranged as required using spring loaded clips
No 8050 (page 30, please order separately).

TBT13216

475.00

Tool box trolley

U
for tool boxes No 13216/2, 13216/3, 13216/4.
1 Safe tool box locking system with quick-release mechanism.
1 Unrestricted access to all tool box functions.
1 Sturdy steel-sheet construction.
1 2 fixed wheels and 2 castors (O 75 mm) with parking brakes.
1 Convenient, fold-away push-handle with endstop.
1 Maximum static load capacity: 150 kg.
Supplied without tool box.

230
mm

510
mm

365
mm

496 x 210 x 85 mm
467 x 182 x 55 mm
467 x 182 x 80 mm
'

'

Code
'

81 09 10 03
'

83/010

kg

Code

W
mm

H
mm

D
mm

11

81 09 10 09

570

216 (914 open)

328

'

401.00

'

kg

253.00

Tool box, 3 trays

lockable by padlock.

83/09

Tool box, 5 trays

lockable by padlock.

'

Code

W
mm

H
mm

D
mm

81 06 00 00

420

150

200

3.7

'

'

'

kg

47.40

W = Width, H = Height, D = Depth

Code

W
mm

H
mm

D
mm

81 05 00 00

420

200

200

4.7

'

'

'

kg

60.00

W = Width, H = Height, D = Depth


'

82/013

Tool box

446/08

with lift out tray.


Lockable by padlock.

'

'

Code

W
mm

H
mm

D
mm

81 08 00 00

545

225

180

6.9

'

'

W = Width, H = Height, D = Depth


'

Tool box, 5 trays

lockable by padlock.

kg

Code

W
mm

H
mm

D
mm

81 07 00 00

530

200

200

5.59

'

118.00

'

kg

72.00

W = Width, H = Height, D = Depth


'

29

Factory and workshop equipment, sets of tools

Perforated panels, hooks and holding devices


8002

8035

Square lug

for perforated panel No 8002,


Mobile workbench No 92KM G and
Tool trolleys No 91B, 91P, 97H/8, 97H/KM.

Perforated panel

Perforation 9 x 9 mm, made of sturdy,


1 mm thick sheet steel, with 2
strengthening ribs at rear. These ribs carry
the holes for wall mounting panel.
For the individual mounting of tools, on a
variety of hooks and clips
No 80318041.

'

Code

size

mm

80 35 00 17
80 35 00 20

1
2

17 x 35
20 x 55

'

'

8036
W
mm

H
mm

D
mm

80 02 00 01

500

1000

15

'

'

23
26

3
3

4.90
4.90

Spring clip

for perforated panel No 8002,


Mobile workbench No 92KM G and
Tool trolleys No 91B, 91P, 97H/8, 97H/KM.

'

Code

kg

117.00

W = Width, H = Height, D = Depth


'

'

8031

Single hook

for perforated panel No 8002,


Mobile workbench No 92KM G and
Tool trolleys No 91B, 91P, 97H/8, 97H/KM.

Code

size

mm

80 36 00 12
80 36 00 18
80 36 00 24

1
2
3

12
18
24

'

'

8038

R
g

9
10
14

6
6
6

2.50
2.50
2.50

Container

for perforated panel No 8002,


Mobile workbench No 92KM G and
Tool trolleys No 91B, 91P, 97H/8, 97H/KM.

'

Code

size

mm

80 31 00 30
80 31 00 60
80 31 00 90

1
2
3

30
60
90

'

'

8032

R
g

13
17
21

5
5
5

2.90
2.90
2.90

'

Code

Twin hook

mm

'

80 38 00 30

for perforated panel No 8002,


Mobile workbench No 92KM G and
Tool trolleys No 91B, 91P, 97H/8, 97H/KM.

30 x 72

'

8041

R
g

15

2.05

Holding device for spanners

for perforated panel No 8002,


Mobile workbench No 92KM G and
Tool trolleys No 91B, 91P, 97H/8, 97H/KM.

'

Code

size

mm

80 32 00 30
80 32 00 60

1
2

30
60

'

'

R
g

19
26

3
3

4.80
4.80
'

8034

Twin hook

Code

mm

'

for perforated panel No 8002,


Mobile workbench No 92KM G and
Tool trolleys No 91B, 91P, 97H/8, 97H/KM.

80 41 02 35

235 x 144 x 47

'

8050

R
g

62

14.50

Spring clip

for perforated panel No 8002,


Mobile workbench No 92KM G,
Tool trolleys No 91B, 91P, 97H/8, 97H/KM and
Tool boxes No 13216/2, 13216/3, 13216/4.

'

Code

size

mm

80 34 00 40
80 34 00 50

1
2

40 x 35
50 x 40

'

'

R
g

30
30

3
3

'

4.90
5.05

Code

size

mm

81 48 50 06
81 48 50 12

6
12

6
12

'

'

30

R
g

28
35

5
5

7.35
7.35

Tool cases, hard shell


13209/1

Workshop sets

Tool case, hard shell,


base model

801N

Large tool set

127 Tools

sturdy aluminium frame, 2 locks,


ergonomically shaped carrying
handle, robust jointed lid-prop,
tool-holder panel for storing tools
from both sides, with 21 pockets
and integrated document pouch.
ABS insert can be subdivided and
includes cover with 6 pockets.

'

Code

kg

'

97 84 12 10

28.6

'

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

No 12/10Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm

No 20/12

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

No 29

sizes 10 x 11; 12 x 13; 14 x 15;


16 x 18; 17 x 19; 21 x 23 mm

No 35c Pkw

sizes 17; 19; 22; 1/2" D

No 39
No 39/1

400 mm (2x)
600 mm (2x)

No 50

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 23; 24; 25; 26;
27; 28; 30; 32 mm

No 51

1/2" a sizes 13; 16 mm-5/8";


17; 18; 19 mm; 20.8 mm-13/16"; 22; 24;
27; 30; 32 mm

No 54

1/2"

a sizes 4; 5; 6; 8; 10; 12; 14 mm

No 501

1/2"

D 433 mm

No 504/15

1/2"

D 397 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 100/8

200 mm

No 103

150 mm

No 104

120 x 4 mm

No 105

100 x 10 mm

No 4622

size 2 (1.2 x 6.5 x 125 mm)


size 3 (1.2 x 8.0 x 150 mm)
size 5 (2.0 x 12.0 x 200 mm)

No 4628

size 2 (0.6 x 3.5 x 75 mm)


size 4 (0.8 x 4.0 x 125 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

'

'

'

'

Code

W
mm

H
mm

D
mm

81 62 00 02

460

310

160

4.1

'

'

'

kg

206.00
'

W = Width, H = Height, D = Depth


'

'

13209/2

Tool case, hard shell,


medium model

as for No 13209/1, but with an


additional combination lock,
tool-holder panel with 13 pockets
and 26 rubber-loop holders,
separate document pouch in the lid,
ABS inlay tray with 13 pockets and
8 rubber-loop holders.

'

'

'

'

'

'

'

'

'

Code
'

81 62 00 03
'

W
mm
460

H
mm
310

D
mm
180

'

R
kg

4.5

'

273.00

W = Width, H = Height, D = Depth

'

'

'

'

13209

2176.65

No 10/12

Tool case, hard shell,


premium model

'

'

as for No 13209/1, but with an


additional combination lock,
tool-holder panel with
13 pockets and 26 rubber-loop
holders, additional tool-holder panel
with 11 pockets and a smaller
components pouch, separate
document pouch in the lid, ABS
inlay tray with 13 pockets and
8 rubber-loop holders.

'

'

'

'

No 65 01 6 180
'

No 65 29 6 200
'

No 65 30 6 200

'

'

Code

W
mm

H
mm

D
mm

81 62 00 01

460

310

180

'

'

W = Width, H = Height, D = Depth

No 65 43 4 002

kg

'

319.00

No 65 45 4 002
'

'

No 65 54 4 250
'

No 65 64 2 250
'

Continuation see next page


31

Factory and workshop equipment, sets of tools


No 66 02 6 160

No 4622

size 2 (1.2 x 6.5 x 125 mm)


size 3 (1.2 x 8.0 x 150 mm)
size 5 (2.0 x 12.0 x 200 mm)

No 4628

size 2 (0.6 x 3.5 x 75 mm)


size 4 (0.8 x 4.0 x 125 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

'

No 10670

310 mm

No 10676

85 x 12 x 315 mm

No 10960

500 g

'

'

'

'

'

'

No 11095/13

0.051 mm

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12050

300 mm

'

'

'

'

'

No 65 01 6 180
'

No 65 29 6 200
'

No 65 30 6 200
'

'

No 65 43 4 002
'

No 12150

200 mm

No 12200

145 mm

'

'

No 65 45 4 002
'

No 65 54 4 250
'

No 12250

No 65 64 2 250

'

'

No 12320
'

No 66 02 6 160
'

No 12375
'

No 10670

310 mm

No 10676

85 x 12 x 315 mm

No 10960

500 g

No 11095/13

0.051 mm

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12050

300 mm

No 12150

200 mm

No 12200

145 mm

'

No 12931
'

802N

3m

'

Large tool set

'

129 Tools
'

'
'

Code

'

kg

'

'

97 84 03 12

28.1

'

2305.35
'

No 12/10Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm

No 13/26

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 23; 24; 25;
26; 27; 28; 29; 30; 32 mm

'

'

No 29
'

sizes 10 x 11; 12 x 13; 14 x 15;


16 x 18; 17 x 19; 21 x 23 mm

'

'

No 12250
'

No 12320
'

No 35c Pkw

sizes 17; 19; 22; 1/2" D

No 39
No 39/1

400 mm (2x)
600 mm (2x)

No 50

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 23; 24; 25; 26;
27; 28; 30; 32 mm

'

'

'

No 51

'

1/2"

a sizes 4; 5; 6; 8; 10; 12; 14 mm

No 501

1/2"

D 433 mm

No 504/15

1/2"

D 397 mm

No 506

1/2"

D 300 mm

No 54
'

'

'

'

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 100/8

200 mm

No 103

150 mm

No 104

120 x 4 mm

No 105

100 x 10 mm

'

'

'

'

'

'

'

'

'

32

1/2" a sizes 13; 16 mm-5/8";


17; 18; 19 mm; 20.8 mm-13/16"; 22; 24;
27; 30; 32 mm

No 12375
'

No 12931
'

803N

3m

Large tool set

164 Tools
'

Code

kg

'

97 84 26 13

17.8

'

No 10/12

No 10a
'

No 12/10Pc
No 12a/13Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm


sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16"

No 13

sizes 8; 9; 10; 11; 12; 13; 14; 15; 16;


17; 18; 19 mm
sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4"

'

No 13a
'

No 21
'

No 20a
'

1767.25

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 23; 24 x 27; 25 x 28; 30 x 32 mm
sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;
5/8 x 11/16; 3/4 x 7/8; 15/16 x 1"

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 17 x 19 mm
sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;
x 7/8; 15/16 x 1"

3/4

No 23/8
No 230a
'

No 50

No 50a

'

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22 mm
sizes 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8;
11/16 x 3/4; 13/16 x 7/8; 15/16 x 1"
1/2"

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 23; 24; 27; 30;
32 mm
1/2" a sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16;
3/4; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 3/16;
1 1/4"

No 501

1/2"

D 433 mm

No 504/15

1/2"

D 397 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 100

150 mm

No 105

120 x 12 mm

No 108

150 x 4; 150 x 6 mm

No 4620

size 3 (1.0 x 5.5 x 100 mm)


size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
size 6 (1.6 x 10.0 x 200 mm)

'

'

'

'

'

'

804N

Large tool set

106 Tools
'

Code

kg

'

97 84 27 14

11.8

'

No 12/10Pc

sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 15; 16;


17; 18; 19; 21; 22; 24; 27; 30; 32 mm

No 40/13/6

1/4" a No 40 sizes 3.5; 4; 4.5; 5; 5.5; 6;


7; 8; 9; 10; 11; 12; 13 mm;
No 400; 404; 405/2; 405/6; 407; 415

No 50

1/2" a sizes 10; 12; 13; 14; 15; 16; 17;


18; 19; 21; 22; 24; 27; 30; 32 mm

No 51

1/2"

No 506

1/2"

D 300 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 100/8

200 mm

No 103

200 mm

No 105-8/6 K

No 105/120 x 10 mm;
No 108/150 x 2.5; 150 x 3; 150 x 4;
150 x 5; 150 x 6 mm

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

size 1; size 2

'

'

'

'

'

'

'

'

'

'

'

'

'

'

No 4628

size 2 (0.6 x 3.5 x 75 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

'

'

'

'

'

'

'

'

No 65 01 6 200
'

No 65 09 5 160

'

'

'

No 65 51 6 240

1094.85

'
'

No 66 02 6 160

a sizes 16 mm-5/8";
20.8 mm-13/16"

No 65 01 6 180

'

'

No 65 29 6 200
'

No 10760CV/9
'

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 65 51 6 240
'

No 65 64 2 250
'

'

No 10760aCV/10Pc sizes 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4;
5/16; 3/8"
No 10970

'

1 lb.

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10955

35 mm O

No 10960

500 g

No 11095/20

0.051 mm

'

No 12050
'

No 66 02 6 160
'

300 mm

'

'

'

No 12251
'

No 12321
'

No 12375
'

33

Factory and workshop equipment, sets of tools


811N

Car tool set

3027

84 Tools

Electrician tool set

85 Tools

'

'

Code

kg

'

97 84 13 11

16.3

'

1138.20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

No 20/12

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 23; 24 x 27; 25 x 28; 30 x 32 mm

'

'

No 39

400 mm (2x)

No 50

1/2"

No 51

1/2"

a sizes 16 mm-5/8"; 20.8 mm-13/16"

No 54

1/2"

a sizes 4; 5; 6; 8; 10; 12; 14 mm

No 504/15

1/2"

D 397 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 100/8

200 mm

'

'

kg

'

No 10/12

Code
97 84 31 01

6.3

'

sizes 6; 7 mm
sizes 9; 10; 11; 12; 13; 14; 17; 19;
22 mm

No 40/23/6N

1/4" a No 40 sizes 5; 5.5; 6; 7; 8; 9; 10;


11; 12; 13; 14 mm
No 41K sizes 0.6 x 3.5; 1 x 5.5;
1.2 x 8 mm
No 44K: 3; 4; 5; 6; 8 mm
No 44P: sizes 1; 2; 3; 4
No 400; 404; 405/2; 405/6; 407; 415

No 46

3/8"

a sizes 12; 20.8 mm

No 4600

3/8"

a size 16 mm

No 425

3/8"

D 165 mm

No 428

3/8"

D a 46 mm

No 427/6

3/8"

D a 160 mm

No 4628

size 2 (0.6 x 3.5 x 75 mm)


size 4 (0.8 x 4.0 x 125 mm)
size 6 (1.0 x 5.5 x 200 mm)

No 4630

size 1; size 2

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10546

size 3

No 10551

size 1 x 2

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 7756

348 Volt

'

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 19; 21; 22; 23; 24; 26; 27; 30; 32 mm
'

'

'

'

'

'

'

'

'

'

'

No 103

150 mm

No 104

120 x 4 mm

No 105

100 x 10 mm

No 4622

size 2 (1.2 x 6.5 x 125 mm)


size 3 (1.2 x 8.0 x 150 mm)
size 5 (2.0 x 12.0 x 200 mm)

'

'

'

'

No 4628
'

size 2 (0.6 x 3.5 x 75 mm)


size 4 (0.8 x 4.0 x 125 mm)

No 4630

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

'

'

992.50

No 13
No 13/9

'

'

'

'

'

'

'

'

'

'

'

'

'

No 65 01 5 180
'

No 65 29 5 160
'

No 65 01 6 180

No 65 30 5 160

'

'

No 65 29 6 200

No 65 51 6 240

'

'

No 65 30 6 200

No 66 02 6 140

'
'

No 65 43 4 002
'

No 66 22 5 160
'

No 65 45 4 002

No 10641

'
'

No 65 54 4 250
'

No 10956

O 35 mm

No 1551

for contact sizing y 2.8 mm

No 1552

for contact sizing y 5.8 mm

No 1560

Content:
1 Piece No 1501 ejection tool for
contact sizing O 1.5 mm
1 Piece No 1502 ejection tool for
contact sizing O 3.5 mm
1 Piece No 1503 ejection tool for
contact sizing O 4.0 mm ABS (trucks)
resp. mounting bush No 1523
2 Pieces No 1511 dismounting bush
O 1.5 mm (1 Piece assembled)
2 Pieces No 1512 dismounting bush
O 3.5 mm (1 Piece assembled)
2 Pieces No 1513 dismounting bush
O 4.0 mm
1 Piece No 1523 mounting bush (ABS)

'

No 65 64 2 250
'

'

No 66 02 6 160

'

'

No 10670

310 mm

No 10676

85 x 12 x 315 mm

No 10960

500 g

'

'

'

No 12375
'

'

34

841N

Tool sets for aerospace industry

Construction machinery set

129 tools, recommended Tool box No 94N, p. 22

13200a

'

Code

kg

'

97 84 14 18

35.9

'

No 10/9

178 Tools
2108.65

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19;
20 x 22; 21 x 24 mm

'

'

No 40/13/6

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24; 27; 30;
32; 34; 36 mm
1/4" a No 40 sizes 3.5; 4; 4.5; 5; 5.5; 6;
7; 8; 9; 10; 11; 12; 13 mm;
No 400; 404; 405/2; 405/6; 407; 415

Code

kg

'

97 84 60 11

15

'

'

No 14

Basic tool set for aircraft mechanics


(piston engine)

No 12a/13Pc
No 13a

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;


11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;

'

25/32; 13/16; 7/8; 15/16;

'

No 230a

'

No 50/16/6

'

1/2" a No 50: sizes 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 21; 22; 24; 27; 30;
32 mm
No 506; 509/5; 509/10; 506; 510; 512

No 504/15

1/2"

D 397 mm

No 514

3/4"

D 1/2" a

No 55/9/6N

3/4"

a No 55: sizes 32; 34; 36; 38; 41;


46; 50; 55; 60 mm
No 552; 554; 556; 558; 559/8; 559/16

No 568

1/2"

'

'

'

'

No 102-5/6Pc

'

D 3/4" a

No 104/120 x 2; 120 x 4 mm
No 105/120 x 10 mm
No 106/125 mm; 150 mm
No 107/125 mm

size 4

No 40aD/30/7QR

1/4"

a No 40a: size 1/8"


No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16" No 40aDL:
sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;
3/8; 7/16; 1/2; 9/16" No 402a: sizes 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2" No 400QR;
405/2QR (2x); 405/6QR; 407QR; 412;
415 SG-QR

No 409

3/8"

D 1/4" a

No 415SGB

1/4"

No 46a

3/8"

a sizes 7/16; 1/2; 9/16; 5/8"

No 427/18

3/8"

D a 455 mm

No 431

1/4"

D 3/8" a

No 45a/22/8QR

3/8"

'

'

'

'

No 4840

sizes 1; 2

No 4891

r 4820: 0.6 x 3.5 x 75 mm


0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm
k 4830: sizes 1; 2

'

'

'

No 10760CV/9

No 1220
No 1221
No 1222
No 1223

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 65 01 5 180
'
'

No 65 31 5 170
'

sizes 0; 1; 2; 3; 4; 5; 6; 8; 10

No 4006/1

1/4"

No 12503

1/4"

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)

No 4632

sizes 1; 2; 3

No 10760aCV/13

sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;


7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4"

'

'

'

No 65 67 2 280
'

No 65 72 6 240
'

'

No 66 00 5 160

'

'

No 10956

O 35 mm

No 10960

300; 500 g

No 11095/20

20 blades 0.051 mm

No 12050

300 mm

No 12050R

10 blades

'

size 0
size 1
size 2
size 3

No 13010
'

No 65 63 2 250

a No 45a: sizes 1/4; 5/16; 11/32; 3/8; 7/16;


1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1"
No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8;
11/16; 3/4"
No 427/10QR; 427/6QR; 427/3QR;
428QR; 435SG-QR; 442; 443; 453

'

'

1"

sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16;


7/16 x 1/2; 1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4;
13/16 x 7/8; 15/16 x 1"

No 4025
'

'

'

2925.90

sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;


5/16; 11/32; 3/8; 7/16; 1/2; 9/16"

'

'

No 65 01 5 180
'

'

No 65 10 5 190
'

'

No 65 31 5 170
'

'

No 65 51 6 240
'

No 12374

No 65 75 1 280

'
'

No 12600
'

1800 g

No 66 00 5 180
'

No 12931
'

No 105-8/6 K

3m
'

No 105/120 x 10 mm;
No 108/150 x 2.5; 150 x 3; 150 x 4;
150 x 5; 150 x 6 mm
Continuation see next page
35

Factory and workshop equipment, sets of tools


No 10670

215 mm

No 10955

O 27 mm

No 10960

300 g

'

No 10955

O 27 mm

No 10960

300 g

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

250 mm

'

'

'

'

'

No 12320
'

'

No 12321
'

'

No 12600
'

500 g

'

No 12900

No 12053

'
'

No 12921N

O 50 mm

No 12922E

O 6 mm

'

No 12321
'

'

No 12900N
'

No 12931
'

No 13110
'

3m

No 12921N

O 40 mm

No 13110

300 mm

'

300 mm

'

No 13126

No 13126

'

'

No 13135

13207a

'

13205a

Standard aircraft maintenance tool set

Electricians set in tool case


No 13209

111 Tools

131 Tools
'

'

Code

Code

kg

'

97 84 60 12

7.8

'

No 12a/13Pc
'

No 13a
'

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;


11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4"

No 230a

sizes
x 11/32; 3/8 x 7/16; 7/16
1/2 x 9/16; 9/16 x 5/8; 11/16 x 3/4"

No 4025

size 4

No 409

3/8"

No 40aD/30/7QR

1/4"

'

'

'

'

No 11611166
'

a No 40a: size 1/8"


No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16" No 40aDL:
sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;
3/8; 7/16; 1/2; 9/16" No 402a: sizes 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2" No 400QR;
405/2QR (2x); 405/6QR; 407QR; 412;
415 SG-QR
0.5 x 4; 0.6 x 3.5; 0.6 x 4.5; 0.8 x 4;
0.8 x 5.5; 1 x 5.5 mm
sizes 0; 1; 2; 3

No 13008

sizes 0; 1; 2; 3; 4; 5

No 13010

sizes 0; 1; 2; 3; 4; 5; 6; 8; 10

No 4006/1

1/4"

No 12503

1/4"

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)

'

1/2;

98 81 03 22

12.5

'

No 13a
No 12a/13Pc

sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;


5/16; 11/32; 3/8; 7/16; 1/2; 9/16"

No 40a

1/4"

a sizes 1/8; 5/32"

No 400QR

1/4"

D 150 mm

No 40aD/12/7QR

1/4"

a No 40a: size 1/8"


No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
No 400QR; 405/2QR (2x); 405/6QR;
407QR; 412; 415SG-QR

No 4006/1

1/4"

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)


size 3 (0.6 x 3.5 x 100 mm)
size 5 (1.0 x 5.5 x 125 mm)
size 6 (1.2 x 6.5 x 150 mm)

No 4665 VDE

sizes 0; 1; 2

No 10760aCV/13

sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;


7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4"

'

'

'

'

'

'

'

'

'

'

'

'

'

No 65 01 5 160, No 65 01 5 180
'

No 65 24 5 160
'

No 65 29 5 200
'

No 65 30 5 200
'

No 4632
'

sizes 1; 2; 3

No 65 31 5 170
'

No 65 01 5 180
'

No 65 55 5 125
'

No 65 10 5 190
'

No 65 76 5 231

No 65 31 5 170

'

'

No 66 00 5 130

No 65 51 6 240

'

'

No 65 75 1 220

No 66 02 5 180

'
'

No 66 00 5 180

No 66 23 5 160

'

No 105-8/6 K

'

36

No 105/120 x 10 mm;
No 108/150 x 2.5; 150 x 3; 150 x 4;
150 x 5; 150 x 6 mm

'

1686.15

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;


11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4"

D 1/4" a

No 12201223
'

1885.60

sizes 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32;


5/16; 11/32; 3/8; 7/16; 1/2; 9/16"

5/16

kg

'

No 105-8/6 K

'

No 105/120 x 10 mm;
No 108/150 x 2.5; 150 x 3; 150 x 4;
150 x 5; 150 x 6 mm

13210

Electronics set in tool case No 13209

101 Tools
'

No 10960
'

300 g

Code

kg

'

No 12053

98 81 03 01

'

10.7

'

No 12320
'

No 12600

500 g

No 12921N

O 40 mm

No 12922E

O 6 mm

'

'

'

sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm


sizes 3/16; 7/32; 1/4; 3/8; 1/2"

No 16

sizes 3.2; 3.5; 4; 4.5; 5 mm

No 4025

size 4

No 4621

size 5 (1.2 x 8.0 x 160 mm)

No 4630

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)


size 4 (0.8 x 4.0 x 100 mm)
size 6 (1.2 x 6.5 x 150 mm)

No 4724

size 1 (0.6 x 3.5 x 25 mm)


size 2 (1.0 x 5.5 x 25 mm)

No 4753

i sizes 0.7; 0.9; 1.3 mm

No 4797

r 4751: 0.3 x 1.5; 0.4 x 2; 0.4 x 2.5;

'

'

'

'

No 12941
'

'

No 13008

sizes 0; 1; 2; 3; 4; 5

No 13010

sizes 0; 1; 2; 3; 4; 5

'

'

No 13126

'

'

No 13130
'
'

No 13131
'

1762.90

No 13
No 13a

'

0.5 x 3 mm

No 13209
'

13208a

l 4752: No 00, No 0; No 1

'

Board case for aircraft in tool case


No 13209

No 10546

size 2 (0.8 x 4.0 x 100 mm)


size 3 (1.0 x 5.5 x 125 mm)

No 10554

220250 Volt

No 10760aCV/13

sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;


7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4"

No 10765

sizes 2; 2.5; 3; 4 mm

No 12500N

sizes 6; 7 mm

'

'

57 Tools
'
'

Code

kg

'

98 81 03 23

8.9

'

900.55

'

1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2"

No 13a

sizes

No 4025

sizes 4; 6; 8

No 1220
No 1221
No 1222
No 1223

size 0
size 1
size 2
size 3

'

'

No 018/3

'

'

No 13008

sizes 0; 1; 2; 3; 4; 5; 6

No 13010

sizes 0; 1; 2; 3; 4; 5; 6; 8; 10

No 4006/1

1/4"

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)

'

'

'

'

'

No 109
'

sizes 1; 2; 3; 4; 5; 6; 7; 8

No 65 01 5 160
'

No 65 11 5 135
'

No 65 32 5 170
'

No 65 36 5 160
'

No 66 04 6 110
'

No 66 06 6 130
'

No 4632

sizes 1; 2; 3

No 10760aCV/13

sizes 0.028; 0.035; 0.050; 1/16; 5/64; 3/32;


7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4"

'

No 66 23 5 160
'

No 12900
'

No 10971

'
'

No 65 01 5 180
'

No 12921N
'

O 50 mm

No 65 10 5 190
'

No 13100
No 65 51 6 240

'

No 13135

'
'

No 65 76 5 231

Drip oiler

'
'

No 66 00 5 180
'

Magnetic lifter
'

No 12320
'

Electronics tweezers
'

No 13126
'

Electronics tweezers
'

Extractor hook set


'

No 13209
'

Test equipment set for safety applications


'

Continuation see next page


37

Factory and workshop equipment, sets of tools


Universal soldering iron

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

465 mm

No 12200

145 mm

'

'

Solder

'

'

Solder removing pump, antistatic

'

'

Blade holders with blades

'

'

Lamp extractor
'

'

Magnifying glass

'

'

No 12378

2 Screwdrivers

'

'

Tweezers

No 12752R

'

'

Stripper
'

No 12800
'

No 12900N
'

Set of soldering tools


'

No 12931

3m

No 13110

300 mm

'

Solder removing wire


'

'

Hand vice
'

13213a

Inspection mirror, insulated, O 40 mm

'

Engine mechanics set

129 Tools
'

No 13209

Code

'

kg

'

97 84 60 10

13211a

12.1

'

Sheetmetal set

No 13a
No 130a

53 Tools

'

No 24

'

Code
97 84 60 08

No 230a

'

855.40

'

No 13a
'

No 230a
'

sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16"


sizes 7/32; 11/32"
sizes

1/4

5/16; 3/8

9/16"

No 4025

size 8

No 442
No 443

1/4"

No 453

3/8"

No 103

150 mm

No 104-5/6D

No 104/120 x 2; 120 x 3; 120 x 4;


120 x 5; 120 x 6 mm
No 105/120 mm

'

'

'

'

No 405

1/4"

D a sizes 10; 14

No 413

1/4"

No 415SGB

1/4"

No 40aD/30/7QR

1/4"

a No 40a: size 1/8"


No 40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
No 40aDL: sizes 5/32; 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
No 402a: sizes 1/4; 9/32; 5/16; 11/32; 3/8;
7/16; 1/2"
No 400QR; 405/2QR (2x); 405/6QR;
407QR; 412; 415 SG-QR

No 45a/22/8QR

3/8" a No 45a: sizes 1/4; 5/16; 11/32; 3/8;


7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16;

'

'

7/16; 1/2

'

b 3/8" a
b 3/8" a

5/16"

'

1"
No 47a: sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8;
11/16; 3/4"
No 427/10QR; 427/6QR; 427/3QR;
428QR; 435SG-QR; 442; 443; 453

'

No 104

120 x 8 mm

No 108/6D

No 108/150 x 2.5; 150 x 3; 150 x 4;


150 x 5; 150 x 6; 150 x 8 mm

'

'

'

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)
size 6 (2.5 x 14.0 x 250 mm)

No 4630

sizes 1; 2; 3

No 4734

size 2

'

'

'

sizes 1/4 x 5/16; 5/16 x 3/8; 3/8 x 7/16;


x 1/2; 9/16 x 5/8; 5/8 x 3/4; 11/16 x 3/4"

7/16

'

No 10a

sizes 1/4 x 5/16; 5/16 x 3/8; 3/8 x 7/16;


x 9/16; 5/8 x 3/4"

1/2

'

kg

'

2511.55

sizes 19/32; 5/8; 11/16; 3/4"


sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"

No 109

sizes 1; 2; 3; 4; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 4 (1.6 x 10.0 x 175 mm)
size 5 (2.0 x 12.0 x 200 mm)

No 4631

sizes 1; 2

No 4632

sizes 1; 2; 3

'

'

'

'

No 65 01 6 180
'

No 65 64 2 175
'

No 66 02 6 160
'

No 10670

265 mm

No 10955

32 mm O

No 10970

3/4;

'

'

'

No 10760aCV/10Pc sizes 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4;
5/16; 3/8"
No 65 16 5 200

'

No 65 31 5 170
'

'

1 1/2 lb.

No 65 51 6 240
'

38

No 65 75 1 220
'

No 402

1/4"

a sizes 6; 7; 8; 9; 10 mm

No 405QR/2

1/4"

D a 54 mm

No 405QR/6

1/4"

D a 150 mm

No 407QR

1/4"

D a 38 mm

No 409M

3/8"

D 1/4" a

No 415QR

1/4"

No 415SGB

1/4"

No 412

1/4"

ba

No 45

3/8"

a sizes 15; 17; 19; 21; 22; 24 mm

No 46

3/8"

a sizes 15; 17; 19; 21 mm

No 427QR/3

3/8"

D a 76 mm

No 427QR/10

3/8"

D a 240 mm

No 428QR

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432M

1/2"

D 3/8" a

No 435QR

3/8"

No 443

5/16"

No 453

3/8"

'

No 66 00 5 160

'

'

No 10960
'

'

300 g

'

No 11097/22

425/1000"

No 12600

500 g

'

'

'

'

No 12900N
'
'

No 12921N
'

O 50 mm
'

13214

Line maintenance set in tool box


No 13216/4

'

'

'

'

'

'

'

for maintenance
on aeroplanes and
helicopters,
122 Tools

'

'

'

b 3/8" a

No 4000
'

No 1163

0.6 x 4.5 mm

No 104

120 x 2; 120 x 3; 120 x 4; 120 x 5 mm

No 109

sizes 2; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

'

'

'

'

'

Code

kg

'

98 81 48 03

27.5

'

'

2790.70

No 65 16 5 200
'

No 65 32 5 170
'

No 65 51 6 240
'

No 65 64 2 175
'

No 65 75 1 220

96 83 08 04

'

No 66 00 5 160
'

No 10956

O 35 mm

No 10960

500 g

No 11095/20

0.051 mm

'

'

96 83 08 06

96 83 17 94
'

No 12053
'

No 12320
'

No 12321
'

96 83 07 95

96 83 08 05

No 13
'

No 12900

No 16

sizes 3.2; 3.5; 4; 4.5; 5 mm

No 25

sizes 7 x 8; 9 x 10; 12 x 13;


17 x 19 mm

No 12921N

O 50 mm

No 12922E

O 6 mm

'

No 12931

3m

No 40

1/4"

'

No 40D

1/4"

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 40L
No 40DL

1/4"

'

'

'

'

a sizes 4; 4.5 mm

a sizes 4.5 mm
1/4" a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;

270 g

'

'

'

'

sizes 5.5; 6; 7; 8; 9; 10; 12; 13; 14; 15;


17; 19; 20; 21; 22; 24; 27; 30 mm

No 12600
'

No 13126

No 8050
'

13; 14 mm

size 6 (4x); size 12 (6x)

No 13216/4
'

39

Factory and workshop equipment, sets of tools


13214 WW

Line maintenance set

No 4000
'

x
1

No 104

120 x 2; 120 x 3; 120 x 4;


120 x 5 mm

No 109

sizes 2; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

'

for maintenance on aeroplanes and helicopters,


121 Tools, in TCS inlays (Tool Control System see page 55-69), 4x3/3
inlays for 4 drawers (No 91P for 2 drawers), suitable for Workbench
No 92KM G, Tool trolley 91B, 91P, 97N, 97N/KM, 97H/8, 97H/KM;
Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box
No 922N.

'

'

'
'

Code

No 65 16 5 200

kg

'

97 83 08 03

10.1

'

'

2170.95

No 65 32 5 170
'

No 65 51 6 240
'

No 65 64 2 175
'

No 65 75 1 220
'

No 66 00 5 160
'

No 10956

O 35 mm

No 10960

500 g

No 11095/20

0.051 mm

'

96 83 08 88

96 83 22 06
'

'

No 12053
'

No 12320
'

No 12321
'

96 83 22 07

96 83 22 08

No 13

sizes 5.5; 6; 7; 8; 9; 10; 12; 13; 14; 15;


17; 19; 20; 21; 22; 24; 27; 30 mm

No 16

sizes 3.2; 3.5; 4; 4.5; 5 mm

No 25

sizes 7 x 8; 9 x 10; 12 x 13;


17 x 19 mm

No 40

1/4"

a sizes 4; 4.5 mm

No 40D

1/4"

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;

'

'

'

'

13; 14 mm

'

No 40L
No 40DL
No 402

1/4"

a sizes 6; 7; 8; 9; 10 mm

No 405QR/2

1/4"

D a 54 mm

No 405QR/6

1/4"

D a 150 mm

No 407QR

1/4"

D a 38 mm

No 409M

3/8"

D 1/4" a

No 415QR

1/4"

No 415SGB

1/4"

No 412

1/4"

ba

No 45

3/8"

a sizes 15; 17; 19; 21; 22; 24 mm

No 46

3/8"

a sizes 15; 17; 19; 21 mm

No 427QR/3

3/8"

D a 76 mm

No 427QR/10

3/8"

D a 240 mm

No 428QR

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432M

1/2"

D 3/8" a

No 435QR

3/8"

No 443

5/16"

No 453

3/8"

'

'

'

'

'

'

'

'

'

'

'

'

'

'

'

'

'

40

a size 4.5 mm
a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;

13; 14 mm

'

'

1/4"
1/4"

b 3/8" a

No 12600
'

270 g

No 12900
'

No 12921N

O 50 mm

No 12922E

O 6 mm

No 12931

3m

'

'

'

No 13126
'

13214a

Line maintenance set in tool box


No 13216/4

No 46a

3/8"

a sizes 5/8; 11/16; 3/4; 7/8"

No 427QR/3

3/8"

D a 76 mm

No 427QR/10

3/8"

D a 240 mm

No 428QR

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432M

1/2"

D 3/8" a

No 435QR

3/8"

No 443

5/16"

No 453

3/8"

'

'

'

'

'

'

for maintenance on
aeroplanes and
helicopters,
123 Tools

'

'

'

b 3/8" a

No 4000
'

No 1163

0.6 x 4.5 mm

No 104

120 x 2; 120 x 3; 120 x 4;


120 x 5 mm

No 109

sizes 2; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

No 10767a/13

sizes 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64;


5/32; 3/16; 7/32; 1/4; 5/16; 3/8"

'

'

'

'

Code

'

kg

'

'

98 81 48 01

27.2

'

2764.25

'

No 65 16 5 200
'

No 65 32 5 170
'

96 83 56 92

No 65 51 6 240
'

No 65 64 2 175
'

No 65 75 1 220
'

No 66 00 5 160
'

96 83 17 93

96 83 17 94

No 10956

O 35 mm

No 10960

500 g

No 11095/20

0.051 mm

'

'

'

96 83 07 95

No 12053

96 83 07 96
'

No 13a

'

No 25a
'

No 40aD
'

No 40aDL
'

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;


11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;
25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8"
sizes 1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16;
1/2 x 9/16"
1/4"

a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;


3/8; 7/16; 1/2; 9/16"
a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;
3/8; 7/16; 1/2; 9/16"
1/4"

a sizes 1/4; 5/16; 3/8; 7/16; 1/2"

No 405QR/2

1/4"

D a 54 mm

No 405QR/6

1/4"

D a 150 mm

No 407QR

1/4"

D a 38 mm

No 409M

3/8"

D 1/4" a

No 415QR

1/4"

No 415SGB

1/4"

No 412

1/4"

ba

No 45a

3/8"

a sizes 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;

'

'

'

No 12321
'

No 12600
'

270 g

No 12900
'

No 12921N

O 50 mm

No 12922E

O 6 mm

No 12931

3m

'

'

1/4"

No 402a
'

No 12320
'

'

No 13126
'

No 8050
'

size 6 (4x); size 12 (6x)

No 13216/4
'

'

'

'

'

'

15/16;

1"

41

Factory and workshop equipment, sets of tools


13214a WW

Line maintenance set

No 4000
'

No 104

120 x 2; 120 x 3; 120 x 4;


120 x 5 mm

No 109

sizes 2; 5

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

No 10767a/13

sizes 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64;


5/32; 3/16; 7/32; 1/4; 5/16; 3/8"

'

'

for maintenance on aeroplanes and helicopters,


122 Tools, in TCS inlays (Tool Control System see page 55-69), 4x3/3
inlays for 4 drawers (No 91P for 2 drawers), suitable for Workbench
No 92KM G, Tool trolley 91B, 91P, 97N, 97N/KM, 97H/8, 97H/KM;
Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely box
No 922N.

'

'

'

Code

'

kg

'

97 83 08 02

No 65 16 5 200

11.5

'

2187.80

'

No 65 32 5 170
'

No 65 51 6 240
'

No 65 64 2 175
'

No 65 75 1 220
'

No 66 00 5 160
'

96 83 08 85

96 83 08 86

No 10956

O 35 mm

No 10960

500 g

No 11095/20

0.051 mm

'

'

'

No 12053
'

No 12320
'

No 12321
96 83 08 87

'

96 83 08 88

No 12600
'

No 13a

'

No 25a
No 40aD
'

sizes
x
x 9/16"

5/16; 5/16

11/32; 3/8

7/16;

No 12900
'

No 12921N

O 50 mm

No 12922E

O 6 mm

No 12931

3m

'

'

1/4"

a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;


3/8; 7/16; 1/2; 9/16"

'

No 13126
'

No 40aDL

1/4"

a sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;

3/8; 7/16; 1/2; 9/16"

'

No 402a

1/4"

a sizes 1/4; 5/16; 3/8; 7/16; 1/2"

No 405QR/2

1/4"

D a 54 mm

No 405QR/6

1/4"

D a 150 mm

No 407QR

1/4"

D a 38 mm

No 409M

3/8"

D 1/4" a

No 415QR

1/4"

No 415SGB

1/4"

No 412

1/4"

ba

No 45a

3/8"

a sizes 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;

'

'

'

'

'

'

'

'

15/16;

'

1"

No 46a

3/8"

a sizes 5/8; 11/16; 3/4; 7/8"

No 427QR/3

3/8"

D a 76 mm

No 427QR/10

3/8"

D a 240 mm

No 428QR

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432M

1/2"

D 3/8" a

No 435QR

3/8"

No 443

5/16"

No 453

3/8"

'

'

'

'

'

'

'

'

42

1/4

270 g

1/2

'

'

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;


11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;
25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8"

b 3/8" a

The modular tool tray system.


Standard the perfectly organised
workshop.
1
Tool trays from STAHLWILLE ensure perfect tool management within the Tool Trolley
or Tool Box. All the tools are neatly arranged and instantly at hand, and always securely held
in the same place. The Tool Trolley or Tool Box can be equipped as required with 1/6, 1/3,
2/3 or 3/3 inlays.
Wherever large numbers of tools are in constant use and rapid, unhindered access is
paramount, the inlays in this tried-and-tested modular STAHLWILLE system provide the
security and efciency required for smooth workows and reliable quality. The drawers
of the Tool Trolleys can be optimally used if a number of spare inlays are kept in store
to enable the perfect for task combination of tools. In addition, these inlays are made of
skydrol resistant and permanently oil resistant engineering plastic and the sculpted cut-outs
protect your high-grade, expensive tools.

The perfectly organised workshop

43

Factory and workshop equipment, sets of tools

Tool sets in plastic inlays for


Workbench No 92KM G, Tool trolleys
No 91B, 91P, 97N, 97N/KM, 97H/8,
97H/KM; Tool boxes No 94N, 94N/KM;
Magazine case No 920 and Wheely box
No 922N (Modular system)

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

'

'

'

'

'

'

'

806/10

Tool set

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

1/2"

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)

No 4630

sizes 1; 2; 3

'

99 Tools, in plastic inlays (modular system see page 44-53), 9x1/3 and
1x3/3 inlays for 4 drawers (No 91P for 2 drawers), suitable for
Workbench No 92KM G, Tool trolleys No 91B, 91P, 97N, 97N/KM, 97H/8,
97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and
Wheely box No 922N.

'

'

'

'

Code

'

kg

'

98 83 00 01

13.35

'

'

1125.60
'

'

'

96 83 81 26

96 83 81 27

'

No 65 01 5 180
'

No 65 29 5 200
'

No 65 43 4 002
'

No 65 45 4 002
96 83 81 28

96 83 81 10

'

No 65 51 6 240
'

No 65 64 2 250
'

No 66 02 5 160
'

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

'

96 83 81 12

96 83 81 13

'

'

'

'

96 83 82 37

96 83 81 21

96 83 81 23

96 83 81 25

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4" a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

'

'

'

44

808/9

Tool set

102 Tools, in plastic inlays (modular system see page 4453), 9x1/3 and
1x3/3 inlays for 4 drawers (No 91P for 2 drawers), suitable for
Workbench No 92KM G, Tool trolleys No 91B, 91P, 97N, 97N/KM, 97H/8,
97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely
box No 922N.

No 456

3/8" a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

No 425

3/8"

D 165 mm

No 427/3

3/8"

D a 76 mm

No 427/6

3/8"

D a 160 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 435

3/8"

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 3 (1.2 x 8.0 x 150 mm)

No 4632

sizes 1; 2; 3

'

'

'

'
'

Code

'

kg

'

'

98 83 00 02

11.7

'

1123.45
'

'

'

'

96 83 81 30

96 83 81 05

No 65 01 5 200
'

No 65 29 5 160
'

No 65 43 4 002
'

No 65 45 4 002
'

96 83 81 06

No 65 51 6 240

96 83 81 10
'

No 65 64 2 250
'

No 66 02 5 160
'

No 102

175 mm

No 105

120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

No 10956

O 35 mm

No 10970

1 lb.

'

'

96 83 81 11

96 83 82 38
'

'

'

96 83 81 32

96 83 81 24

96 83 81 31

No 10

sizes 5.5 x 7; 8 x 10; 10 x 12; 11 x 13;


12 x 14; 14 x 17; 17 x 19; 18 x 21;
19 x 22; 22 x 24 mm

No 14

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4" a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

'

'

'

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

'

'

'

'

'

'

'

'

The modular tool tray system


1/6 tray
(175 x 175 mm)

1/3 tray
(175 x 350 mm)

2/3 tray
(350 x 350 mm)

3/3 tray
(530 x 350 mm)

45

Factory and workshop equipment, sets of tools


ES 10/10, 5.5x722x24 mm

ES 13/5, 2732 mm

175 x 350 x 60 mm, 10 pieces

'

530 x 350 x 30 mm, 5 pieces

Code

'

96 83 81 30

'

1100

'

84.75

Code

'

No 10

'

83 81 20 33
'

sizes 5.5 x 7; 8 x 10; 10 x 12; 11 x 13;


12 x 14; 14 x 17; 17 x 19; 18 x 21;
19 x 22; 22 x 24 mm

Empty tray

106

8.60

96 83 81 04

2280

'

No 13
'

83 81 20 40
'

165.60

sizes 27; 28; 29; 30; 32 mm

Empty tray

287

22.80

ES 14/10, 615 mm

ES 10/10, 6x730x32 mm

175 x 350 x 39 mm, 10 pieces

175 x 350 x 70 mm, 10 pieces

'
'

Code
'

96 83 81 26
No 10

'

83 81 20 22
'

Empty tray

'

1515

'

Code

85.10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm
112

96 83 81 05

700

'

No 14
'

83 81 20 34
'

92.95

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;


15 mm

Empty tray

110

8.65

8.65

ES 14/8, 1624 mm
ES 13/10, 615 mm

175 x 350 x 51 mm, 8 pieces


'

175 x 350 x 40 mm, 10 pieces

Code
96 83 81 27
No 13
'

83 81 20 23
'

96 83 81 06

Empty tray

87.45

No 14
'

83 81 20 35

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;


15 mm
105

1820

'

525

'

'

'

Code

'

'

132.85

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm

Empty tray

112

8.65

ES 20/8, 6x719x22 mm

8.65

ES 13/8, 1624 mm

175 x 350 x 30 mm, 8 pieces


'

96 83 81 67

96 83 81 28

1440

'

No 13
'

83 81 20 24
'

46

Empty tray

No 20
128.15

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm


112

1266

'

'

'

'

Code

Code

175 x 350 x 54 mm, 8 pieces

8.65

'

83 81 20 83
'

Empty tray

105.80

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22 mm
103

8.85

ES 20/10, 6x730x32 mm

ES 10750/10, 6x720x22 mm

175 x 350 x 30 mm, 10 pieces


'

Code

'

'

Code
96 83 81 07

2620

'

No 20

'

83 81 20 44
'

96 83 81 68

'

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

Empty tray

309

1132

'

161.25

22.80

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19;
20 x 22 mm

No 10750 1/2

sizes 6; 7

'

'

97.80

No 10750

'

83 81 20 84

530 x 350 x 44 mm, 10 pieces

Empty tray

103

8.85

ES TX/32

ES 24/7, 8x1019x22 mm

175 x 350 x 40 mm, 32 pieces

175 x 350 x 30 mm, 7 pieces

'
'

Code
96 83 81 71

835

'

No 24
'

83 81 20 86
'

103

'

130.75

sizes 8 x 10; 10 x 11; 11 x 13; 12 x 14;


14 x 17; 17 x 19; 19 x 22 mm

Empty tray

Code

'

8.85

96 83 81 66

931

'

sizes E6 x E8; E10 x E12; E14 x E18;


E20 x E24

No 45TX

3/8"

a sizes E8; E10; E12; E14

No 50TX

1/2"

a sizes E16; E18; E20

No 412

1/4"

ba

No 442

1/4"

b 3/8" a

No 543

5/16"

No 1440
No 1441
No 1442
No 1443
No 1444
No 1445

size T10
size T15
size T20
size T25
size T27
size T30

No 1432
No 1433
No 1434

size T40
size T45
size T50

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

'

'

'

ES 25/7, 7x817x19 mm

'

'

'

175 x 350 x 30 mm, 7 pieces


'

Code
96 83 81 08

1040

'

No 25
'

83 81 20 38
'

'

'

165.35

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;


14 x 15; 16 x 18; 17 x 19 mm

Empty tray

111

263.75

No 21TX

'

8.65

b 1/2" a

'

83 81 20 82
'

Empty tray

103

8.85

ES 29/6, 8x918x19 mm

175 x 350 x 30 mm, 6 pieces


'

Code

'

96 83 81 09

1185

'

No 29
'

83 81 20 41
'

Empty tray

220.25

sizes 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19 mm
105

8.65

47

Factory and workshop equipment, sets of tools


ES 1/4" + 10760CV

ES 1/2" 512/6

175 x 350 x 35 mm, 6 pieces

175 x 350 x 41 mm, 27 pieces

'

'

Code
'

96 83 81 10

1035

'

No 40
'

Code

'

184.55

1/4" a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

96 83 81 13

1915

'

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

'

'

No 400

1/4"

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;


12 mm

'

'

'

'

'

'

'

'

83 81 20 28
'

D 150 mm

Empty tray

'

'

'

'

83 81 20 29
'

Empty tray

110

145.55

8.65

ES 54/54KK

107

8.65

ES 456/16/6

175 x 350 x 38 mm, 14 pieces


'

Code

'

96 83 81 14

1630

'

175 x 350 x 40 mm, 22 pieces

Code
'

83 81 20 46
'

96 83 81 11

1555

'

3/8" a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

No 425

3/8"

D 165 mm

No 427/3

3/8"

D a 76 mm

No 427/6

3/8"

D a 160 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 435

3/8"

'

'

'

'

'

83 81 20 32
'

Empty tray

No 54KK

1/2"

Empty tray

108

175 x 175 x 30 mm, 5 pieces


'

103

8.65

Code

'

96 83 81 65

ES 52/17

505
No 54KK

'

83 81 20 51
'

175 x 350 x 47 mm, 17 pieces


'

R
g

'

96 83 81 12

1760

'

No 52

'

83 81 20 30
'

48

Empty tray

8.65

ES 54KK/5

'

Code

a sizes 5; 6; 8; 10 mm

244.70

No 456

'

1/2" a sizes 4; 5; 6; 7; 8; 10; 12; 14; 17;


19 mm

'

'

No 54
'

'

171.05

139.70

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

107

8.65

Empty tray

1/2"

67.50

a sizes 5; 6; 7; 8; 10 mm
55

4.20

ES 1054/2054

ES 55/6/4

175 x 175 x 30 mm, 6 pieces


'

Code
96 83 81 64

900

'

No 1054
No 2054
'

83 81 20 81
'

530 x 350 x 83 mm, 10 pieces

'

'

73.00

Code

'

1/2"

a sizes 8; 10; 12 mm
1/2" a sizes 5; 6; 14 mm

Empty tray

55

96 83 81 74

7875

'

4.30

No 55

3/4"

a sizes 34; 36; 41; 46; 50; 55 mm

No 552

3/4"

No 556

3/4"

No 558

510 mm

No 559/8

3/4"

'

'

ES 54X/54TX
'

'

'

83 81 20 89
'

409.60

D a 200 mm

Empty tray

298

24.80

ES 2309/4

175 x 350 x 38 mm, 16 pieces


'

Code

'

96 83 81 15

1600

'

212.35

1/2"

No 54X

a sizes M5; M6; M8; M10; M12;


M14; M16

No 54TX

1/2"

'

a sizes T20; T25; T27; T30; T40;

175 x 175 x 40 mm, 4 pieces


'

T45; T50; T55; T60

'

83 81 20 45
'

Empty tray

111

8.65

Code

'

96 83 81 62

1145

'

No 2309

ES 1054/2054TX/6

1/2"

120.70

a sizes 17; 19; 20.8 mm-13/16";

22 mm

'

83 81 20 80
'

Empty tray

55

4.30

ES 2309K/3
175 x 175 x 30 mm, 6 pieces
'

Code

'

96 83 81 63

950

'

No 1054TX
No 2054TX
'

83 81 20 81
'

Empty tray

93.60

1/2"

a sizes T30; T50; T55; T60


1/2" a sizes T40; T45
55

175 x 175 x 40 mm, 3 pieces


'

Code
4.30

'

96 83 82 60

800

'

No 2309K
'

83 81 20 80
'

Empty tray

1/2"

111.30

a sizes 17; 19; 20.8 mm-13/16"


55

4.30

49

Factory and workshop equipment, sets of tools


ES 721/15/3/2

ES 4620/4622/4632/8

175 x 350 x 39 mm, 8 pieces

'

530 x 350 x 40 mm, 6 pieces

Code
96 83 81 72

5012

'

No 2309K

1/2"

No 721/15

30150 N m

No 35c cars

17; 19; 22; D 1/2"

'

'

'

96 83 82 38

'

Code

'

770

'

563.00

a sizes 17; 19; 20.8 mm-13/16"

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 3 (1.2 x 8.0 x 150 mm)

No 4632

size 1; 2; 3

'

'

'

'

83 81 21 02
'

No 10599/2
'

83 81 20 87
'

83.00

Empty tray

111

8.65

245 mm

Empty tray

299

23.70

ES 46224734/9

ES 4620/4628/4630/7

175 x 350 x 39 mm, 9 pieces


'

175 x 350 x 39 mm, 7 pieces

Code

'

'

Code
96 83 82 36

530

'

No 4620

'

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2

'

98

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4632

sizes 1; 2

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

'

'

Empty tray

No 4622

'

size 1 (0.4 x 2.5 x 60 mm)

'

'

52.25

No 4628
'

865

'

'

83 81 21 01

96 83 82 34

8.65

'

83 81 21 03
'

ES 4620/4630/8

Empty tray

100

89.95

8.65

ES 4622SK/4632SK/6

175 x 350 x 39 mm, 8 pieces


175 x 350 x 39 mm, 6 pieces

'

Code
96 83 82 37

770

'

No 4620

'

No 4630
'

83 81 21 02
'

'

'

Empty tray

71.30

96 83 82 19

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)

770

'

No 4622SK

size 1 (0.8 x 4.0 x 90 mm)


size 2 (1.0 x 5.5 x 100 mm)
size 3 (1.2 x 6.5 x 125 mm)
size 4 (1.2 x 8.0 x 150 mm)

No 4632SK

sizes 1; 2

'

sizes 1; 2; 3
111

8.65

'

83 81 21 06
'

50

Code
'

Empty tray

111

82.50

8.65

ES 4650/9

ES 4820/4830/8

175 x 350 x 39 mm, 9 pieces

175 x 350 x 30 mm, 8 pieces

'

Code
'

96 83 82 17

645

'

No 4650
'

83 81 21 04
'

84.75

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

Empty tray

100

'

Code

'

96 83 81 35

735

'

No 4820

0.6 x 3.5 x 75 mm; 0.8 x 4.0 x 100 mm


1.0 x 5.5 x 125 mm; 1.2 x 6.5 x 150 mm
1.6 x 8.0 x 175 mm

No 4830

sizes 1; 2; 3

8.65
'

ES 4656/9

'

83 81 20 68
'

82.55

Empty tray

110

8.90

ES 4856/9
175 x 350 x 39 mm, 9 pieces
'

Code

'

96 83 82 18

645

'

100.55

175 x 350 x 30 mm, 9 pieces


'

No 4656
'

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

Code

'

83 81 21 04
'

Empty tray

100

8.65

96 83 81 36

705

'

No 4856

ES 4660/4665 VDE/6
'

83 81 20 67
'

Empty tray

113.45

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40
110

8.85

ES 12500N/7
175 x 350 x 39 mm, 6 pieces
'

Code

'

96 83 82 35

525

'

No 4660 VDE

'

No 4665 VDE
'

83 81 21 05
'

54.50
175 x 350 x 39 mm, 7 pieces

size 1 (0.4 x 2.5 x 75 mm)


size 3 (0.6 x 3.5 x 100 mm)
size 5 (1.0 x 5.5 x 125 mm)
size 6 (1.2 x 6.5 x 150 mm)

'

96 83 82 00

sizes 1; 2

Empty tray

Code
'

1060

'

99

8.65

No 12500N
'

83 81 30 85
'

Empty tray

101.65

sizes 7; 8; 9; 10; 11; 12; 13 mm


103

8.85

ES 4820/4830/6
ES 10768/6

175 x 350 x 33 mm, 6 pieces


'

Code

'

96 83 81 34

480

'

No 4820

'

No 4830
'

83 81 20 66
'

Empty tray

55.85

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm

350 x 350 x 37 mm, 6 pieces


'

Code

'

96 83 81 19

780

'

No 10768

sizes 1; 2

'

111

8.60

83 81 20 42
'

Empty tray

66.40

sizes 3; 4; 5; 6; 8; 10 mm
209

16.80
51

Factory and workshop equipment, sets of tools


ES 10769/7

ES 65016602/7B

175 x 350 x 35 mm, 7 pieces

530 x 350 x 40 mm, 7 pieces

'

Code

'

'

96 83 81 20

450

'

58.15

Code

'

96 83 81 32

2055

'

No 10769
'

83 81 20 43
'

Empty tray

182.10

sizes T10; T15; T20; T25; T27; T30; T40


116

8.65

No 65 01 5 200
'

No 65 29 5 160
'

ES 10769B/7

No 65 43 4 002
'

No 65 45 4 002
'

No 65 51 6 240
'

No 65 64 2 250
'

175 x 350 x 35 mm, 7 pieces

No 66 02 5 160
'

'

Code
96 83 81 29

450

'

No 10769B
'

'

'

'

83 81 20 43

83 81 20 21

Empty tray

59.85

Empty tray

307

23.90

ES 65436546/4

sizes T10; T15; T20; T25; T27; T30; T40


116

8.65

ES 65016602/7A
175 x 350 x 30 mm, 4 pieces
'

Code

'

96 83 81 22
'

'

96 83 81 21

8.55

No 65 44 4 021

R
2085

'

109

'

'

'

83.45

No 65 43 4 002

530 x 350 x 40 mm, 7 pieces

Code

700

185.70

No 65 45 4 002
'

No 65 46 4 021

No 65 01 5 180

'

'

83 81 20 37

No 65 29 5 200

'

Empty tray

'

No 65 43 4 002

ES 102/108/109/4

'

No 65 45 4 002
'

No 65 51 6 240
'

No 65 64 2 250
'

175 x 350 x 30 mm, 4 pieces

No 66 02 5 160
'

83 81 20 21
'

Empty tray

307

23.90

'

Code

'

96 83 81 23
'

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

'

'

'

83 81 20 27
'

52

Empty tray

555

47.85

115

8.65

ES 102/105/108/8

ES 10956/10970/2

175 x 350 x 33 mm, 8 pieces

175 x 350 x 45 mm, 2 pieces


'

'

Code
96 83 81 24

900

'

No 102

175 mm

No 105

120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

'

'

'

96 83 81 31

'

Empty tray

1075

'

No 10956

O 35 mm

No 10970

1 lb.

'

'

83 81 20 25
'

83 81 20 36

'

63.90

114

Code

'

Empty tray

114

54.65

8.65

8.65

Empty inlay
ES 1067013110/11

175 x 350 x 30 mm

530 x 350 x 35 mm, 11 pieces


'
'

Code

Code

'

96 83 81 73

2120

'

No 10670

265 mm

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

465 mm

'

'

'

'

'

'

'

172.95

83 81 20 47
'

R
g

110

8.65

Empty inlay
175 x 175 x 28 mm

No 12320
'

No 12321
'

'

No 12377

Code

'

'

No 12931

3m

No 13110

300 mm

'

'

83 81 20 88
'

Empty tray

83 81 20 80
'

301

R
g

55

4.30

23.70

ES 10956/10960/2

175 x 350 x 45 mm, 2 pieces


'

Code

'

96 83 81 25

1130

'

No 10956

O 35 mm

No 10960

500 g

'

'

83 81 20 25
'

Empty tray

114

50.25

8.65

53

Factory and workshop equipment, sets of tools

The modular tool tray system.


Tool Control System built-in safety.
1
Initially, the TCS Tool Control System was developed by STAHLWILLE in conjunction with
British Aerospace MAD for the aerospace industry with a view to improving safety.
Today, the system is appreciated by employees in the automotive industry and other elds
of industry and the trades for its convincing benets. The system guarantees a high level of
organisation and security, protects high-grade, expensive tools from damage and is ideal
wherever large numbers of tools are prone to disappear in other words, a real
value-for-money investment that will soon pay for itself.
The advantages at a glance:
1 With

our Tool Control System, the tools are arranged in chemical-resistant special foam

inlays with sculpted three-dimensional cut-outs.


1 The

signal colour is yellow. A glance is enough to see whether all tools are in their correct

places: if you can see yellow, there is something missing.

The sculpted cut-outs for each tool are individually shaped using computer
technology to provide each tool with a secure place. Easy to remove thanks
to additional recesses.

54

The sculpted cut-outs enable you to see at a glance where each tool goes.

The inlays are chemical-resistant and extremely exible.

Two-layer, two-colour plastic inlays: the upper half is black and the lower layer

Saves time and money.

is yellow.

Tool sets in TCS inlays for Workbench


No 92KM G, Tool trolleys No 97N,
97N/KM, 97H/8, 97H/KM, Tool boxes
No 94N, 94N/KM, Magazine case
No 920 and Wheely box No 922N

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

'

'

'

'

'

'

806/9 TCS

'

TCS tool set

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

1/2"

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 4620

size 1 (0.6 x 3.5 x 75 mm);


size 2 (0.8 x 4.0 x 100 mm);
size 3 (1.0 x 5.5 x 125 mm);
size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2; 3

'

98 Tools, in TCS inlays (Tool Control System see page 55-69), 7x1/3,
1x2/3 and 1x3/3 inlays for 4 drawers (No 91P for 2 drawers), suitable for
Workbench No 92KM G, Tool trolleys No 91B, 91P, 97N, 97N/KM, 97H/8,
97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and Wheely
box No 922N.

'

'

'

'

'
'

Code

'

kg

'

'

98 83 00 04

12.53

'

1210.85

'

'

No 65 01 5 180
'

96 83 81 75

96 83 81 76

No 65 29 5 200
'

No 65 43 4 002
'

No 65 45 4 002
'

No 65 51 6 240
'

96 83 81 77

96 83 82 78

No 65 64 2 250
'

No 66 02 5 160
'

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

'

'

'

96 83 81 79

96 83 81 80
'

'

96 83 81 81

96 83 81 82

96 83 81 83

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4" a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

'

'

'

55

Factory and workshop equipment, sets of tools


TCS 10/10, 6x730x32 mm

TCS 10+13+24/30

530 x 350 x 75 mm, 30 pieces

'

Code

'

96 83 06 05

3724

'

350 x 350 x 30 mm, 10 pieces

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm

No 24

size 10 x 11 mm

'

Code

'

96 83 81 82

1550

'

'

104.65
'

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

'

377.55

'

TCS 10a/9

TCS 10/10, 6x730x32 mm MF

175 x 350 x 70 mm, 9 pieces


'

175 x 350 x 75 mm, 10 pieces

Code

'

'

Code

96 83 87 79

'

96 83 03 53

1437

'

No 10

'

114.35

sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;


x 11/16; 5/8 x 3/4; 3/4 x 7/8;
25/32 x 13/16; 15/16 x 1; 1 1/8 x 1 5/16"

No 10a

104.25

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm

'

1555
19/32

'

TCS 13/18, 624 mm

TCS 10/10, 6x724x27 mm

530 x 350 x 35 mm, 18 pieces


175 x 350 x 66 mm, 10 pieces

'

'

Code

Code

'

96 83 81 87

1287

'

No 10

96 83 81 83
91.75

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 24 x 27 mm

'

'

1850

'

No 13

231.30

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24 mm

'

TCS 13/17, 624 mm

TCS 10/10, 6x724x27 mm MF

175 x 350 x 70 mm, 10 pieces


'

'

96 83 03 58

1320

'

'

96.65

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 24 x 27 mm

96 83 01 64

1615

'

No 13
'

56

Code
'

No 10

'

350 x 350 x 60 mm, 17 pieces

Code

210.60

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24 mm

TCS 13/17, 624 mm MF

TCS 12+13+14/29

530 x 350 x 80 mm, 29 pieces


'

Code

'

96 83 01 93

350 x 350 x 60 mm, 17 pieces

3752

'

418.45

'

Code

'

96 83 03 51

1552

'

No 13

220.10

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24 mm

'

No 12

sizes 5.5; 12; 14 mm (2x)

No 13

sizes 7; 11 mm (2x);
6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18;
19; 20; 22; 24; 30; 32; 36 mm (1x)

No 14

size 17 mm

'

'

'

TCS 13/21, 634 mm

TCS 13a/19

530 x 350 x 75 mm, 21 pieces


'

Code

'

96 83 01 74

3571

'

No 13

343.90

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24; 27; 30; 32;
34 mm

'

350 x 350 x 55 mm, 19 pieces


'

Code

'

96 83 87 78

2000

'

No 13a

TCS 13/25, 5.5-34 mm


'

272.75

sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8;


7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32;
13/16; 7/8; 15/16; 1"

TCS 13a/23

530 x 350 x 80 mm, 25 pieces


'

Code

'

96 83 20 96

4550

'

432.75

530 x 350 x 35 mm, 23 pieces


'

No 13

'

sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22; 23; 24;
27; 29, 30; 32; 34 mm

Code

'

96 83 08 85

2726

'

No 13a

'

357.90

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;


11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;
25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8"

57

Factory and workshop equipment, sets of tools


TCS 14/5, 1721 mm

TCS 20/10, 6x730x32 mm

175 x 350 x 30 mm, 5 pieces


'

Code

'

96 83 81 88

1065

'

No 14

93.80
350 x 350 x 45 mm, 10 pieces

sizes 17; 18; 19; 20; 21 mm

'

'

Code

TCS 14/8, 816 mm

'

96 83 01 66

2450

'

No 20

TCS 240/6

'

Code

'

96 83 81 89

660

'

No 14

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21;
19 x 22; 24 x 27; 30 x 32 mm

'

175 x 350 x 30 mm, 8 pieces

93.20

sizes 8; 10; 11; 12; 13; 14; 15; 16 mm

'

173.15

175 x 350 x 35 mm, 6 pieces

TCS 20/8, 6x719x22 mm

'

Code

'

96 83 87 74

1163

'

No 240

247.20

sizes 10; 11; 13; 14; 17; 19 mm

'

TCS 17/12

175 x 350 x 45 mm, 8 pieces


'

Code

'

96 83 81 92

1300

'

No 20

116.65

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

'

175 x 350 x 45 mm, 12 pieces


'

TCS 20/8, 6x719x22 mm MF

Code

'

96 83 06 49

1550

'

No 17

TCS 25/7

'

Code

96 83 03 56

1323

'

No 20
'

sizes 8; 9; 10; 11; 12; 13; 14; 15; 16;


17; 18; 19 mm

'

175 x 350 x 45 mm, 8 pieces

'

262.25

121.55

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

175 x 350 x 30 mm, 7 pieces


'

Code

'

96 83 87 51

984

'

No 25
'

58

177.00

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;


14 x 15; 16 x 18; 17 x 19 mm

TCS 29/7, 8x920x22 mm

TCS 40/41/44/8

175 x 350 x 40 mm, 7 pieces

175 x 350 x 45 mm, 33 pieces

'

'

Code

'

'

96 83 01 95

1520

'

286.00

96 83 02 17

715

'

No 29

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15;


16 x 17; 18 x 19; 20 x 22 mm

'

1/4" a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 41K

1/4"

No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4"

a, k sizes 1; 2; 3; 4

No PZ 1221
No PZ 1222

1/4"
1/4"

E, l size 1
E, l size 2

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 409

3/8"

D 1/4" a

No 412

1/4"

ba

No 415

1/4"

a, r 0.6 x 3.5; 1.0 x 5.5;


1.2 x 8 mm

'

'

'

'

'

175 x 350 x 30 mm, 3 pieces


'

'

Code

'

96 83 87 65

'

1400

'

120.40

'

'

No 4026
'

sizes 8; 10; 12
'

TCS 1/4" + 10760CV

'

'

TCS 40/35/9

175 x 350 x 43 mm, 27 pieces


'

Code

'

96 83 81 76

987

'

195.60

175 x 350 x 40 mm, 44 pieces


'

No 40
'

1/4"

a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

'

'

'

'

'

'

'

Code

'

96 83 06 01

1045

'

1/4" a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 40L

1/4" a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;


11; 12; 13 mm

No 41K

1/4" a, r 0.6 x 3.5; 1.0 x 5.5;


1.2 x 8 mm

No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4"

a, k sizes 1; 2; 3; 4 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2
No 405/4

1/4"
1/4"

D a 54 mm
D a 100 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 409

3/8"

D 1/4" a

'

'

'

'

'

'

'

'

'

'

'

'

445.90

No 40

'

'

273.05

No 40
'

TCS 4026/3

Code

59

Factory and workshop equipment, sets of tools


TCS 456/16/7

TCS 456/31/8

175 x 350 x 40 mm, 23 pieces


'

Code

'

96 83 02 18

1400

'

264.30

3/8"

No 456

a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

'

No 427/3
'

3/8"

D a 76 mm

350 x 350 x 32 mm, 39 pieces


'

Code

'

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

3/8"

No 435

3/8"

'

'

'

'

'

'

96 83 06 02

2701

'

No 456

a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

No 46

3/8"

a sizes 10; 11; 12; 13 mm

No 47

3/8"

a sizes 10; 11; 12; 13; 14; 15; 16

'

'

mm

'

No 1049

3/8"

a size 9 mm

No 49X

3/8"

a sizes M6; M8; M10

No 427/3

3/8"

D a 76 mm

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

D 3/8" a

No 435

3/8"

No 452

3/8"

'

TCS 456/16/4 MF

'

'

'

'

'

175 x 350 x 45 mm, 20 pieces

'

'

Code

'

'

'

96 83 03 57

1123

'

No 456

3/8"

236.05

a sizes 7; 8; 9; 10; 11; 12; 13; 14;

'

15; 16; 17; 18; 19; 20; 21; 22 mm

'

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 435

3/8"

'

'

'

'

696.25

3/8"

TCS 49/1049/2049/45TX/49TX

175 x 350 x 40 mm, 24 pieces


'

Code

'

96 83 87 72

1200

'

No 49

3/8"

a sizes 4; 5; 6; 7; 8; 10 mm

No 1049
No 2049

3/8''
3/8''

a size 7 mm
a sizes 4; 5; 6; 8; 10 mm

No 45TX

3/8''

a sizes E5; E6; E7; E8; E10; E12

No 49TX

3/8''

a sizes T10; T15; T20; T25; T30;

'

STAHLWILLE AS Drive

'

'

STAHLWILLE sockets are equipped with the AS Drive*


profile: this permits high transmission of forces to the
lands of nuts and bolts without damaging them.
No longer will you have to worry about stripping the
corners off nuts and bolts.
*Anti-Slip-Drive

60

'

258.45

T40

TCS 1/2"-512/6

TCS 50/52/30/6 MF

175 x 350 x 35 mm, 6 pieces


'

Code

'

96 83 81 75

1845

'

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

'

'

'

156.60
350 x 350 x 70 mm, 36 pieces
'

Code

'

No 509/10
'

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

'

'

96 83 03 54

4604

'

No 50

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 30 mm

No 52

1/2" a sizes 12; 13; 17; 18; 19; 20; 21;


22; 24; 27; 30; 32; 34 mm

No 54

1/2"

a sizes 5; 6; 7; 8; 10; 12 mm

No 506

1/2"

D 300 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

'

TCS 1/2"-512/9

'

'

'

'

'

175 x 350 x 40 mm, 9 pieces

'

'

Code

'

'

96 83 06 03

2364

'

No 506

1/2"

D 300 mm

No 509QR/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509QR/10

1/2"

D a 255 mm (2x)

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

No 514

3/4"

D 1/2" a

'

'

'

'

'

'

'

'

423.75

'

198.15

TCS 50/51/52/32

175 x 350 x 50 mm, 32 pieces


'

1/2"

Code

'

96 83 81 91

2950

'

TCS 52/14/4

283.90

No 50

1/2" a sizes 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 30 mm

No 52

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 51

1/2"

'

'

'

a sizes 22; 27 mm

175 x 350 x 50 mm, 18 pieces

TCS 52/17

'

Code
'

96 83 87 81

2510

'

No 52

1/2"

234.90

a sizes 10; 11; 12; 13; 14; 15; 16;

17; 18; 19; 22; 24; 27; 30 mm

'

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

'

'

'

No 512
'

1/2"

175 x 350 x 40 mm, 17 pieces


'

Code

'

96 83 81 77

1605

'

No 52

'

150.75

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

61

Factory and workshop equipment, sets of tools


TCS 52/18 MF

TCS 40/456/52/78/19

175 x 350 x 55 mm, 18 pieces


'

530 x 350 x 60 mm, 97 pieces

Code

'

'

96 83 03 59

1850

'

1/2"

No 52

170.15

96 83 20 95

a sizes 10; 11; 12; 13; 14; 15; 16;

7000

'

17; 18; 19; 20; 21; 22; 24; 27; 30;


32; 34 mm

'

Code
'

No 40

1/4" a sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11;


12; 13 mm

No 44K

1/4"

No 456

3/8"

a sizes 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22 mm

No 49

3/8"

No 52

1/2"

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 21; 22; 24; 27; 30; 32;
34 mm

No 54

1/2"

a sizes 10; 12 mm

No 40TX

1/4"

a sizes E8; E10

No 44KTXB

1/4"

a sizes T8; T10; T15; T20; T25;


T27; T30; T40

No 45TX

3/8"

a sizes E8; E10; E12; E14

No 49TX
No 54TX

3/8"

a sizes T25; T45


a sizes T40; T50; T55; T60

No 1054TX
No 2054TX

1/2"
1/2"

a sizes T50; T55


a size T40; T45

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2
No 405/4

1/4"
1/4"

D a 54 mm
D a 100 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 425

3/8"

D 165 mm

No 427/3

3/8"

D a 76 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

D 3/8" a

No 435

3/8"

No 506

1/2"

D 300 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

'

'

TCS 50a/17

'

'

175 x 350 x 40 mm, 17 pieces

'

'
'

Code

'

96 83 87 80

1600

'

'

173.45

1/2"

a sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8;


11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16;

No 50a

1/8;

'

3/16;

'

'

1/4"
'

TCS 54/54TX/18
'

'

'

'

175 x 350 x 40 mm, 18 pieces


'

'

Code

'

96 83 87 82

1665

'

1/2"

No 54

'

227.70

a sizes 4; 5; 6; 7; 8; 10; 12; 14;

17 mm

'

No 54TX

1/2"

T45; T50; T55; T60

'

'

'

'

a sizes T20; T25; T27; T30; T40;

'

'

TCS 50TX/54TX/17

'

'

'

'

'

175 x 350 x 40 mm, 17 pieces

'

'

Code
'

'

96 83 87 63

1382

'

62

215.60
'

No 50TX

1/2" a sizes E10; E11; E12; E14; E16;


E18; E20; E24

No 54TX

1/2" a sizes T20; T25; T27; T30; T40;


T45; T50; T55; T60

'

'

'

1040.45

1/2"

a, E 3; 4; 5; 6; 8 mm

a sizes 5; 6; 8 mm

TCS 54/2309K/12506

TCS 40/45/50/89/19

175 x 350 x 40 mm, 13 pieces


'

530 x 350 x 70 mm, 108 pieces

'

Code

Code

'

96 83 01 92

7770

'

No 40

1/4"

96 83 01 63
1189.40

10; 11; 12; 13 mm

'

No 44
'

1/4"

1830

'

a sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9;

1/2" a sizes 5; 6; 7; 8; 10; 12; 14; 17;


19 mm

No 2309K

1/2"

No 12506

sizes 6; 7 mm

'

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 409M

3/8"

D 1/4" a

No 415

1/4"

No 45

3/8"

a sizes 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19 mm

175 x 350 x 35 mm, 16 pieces

No 46

3/8"

Code

'

'

'

'

'

'

'

'

a sizes 20.8

'

'

mm-13/16"

a sizes 4; 5; 6; 7; 8; 10 mm

No 425

3/8"

D 165 mm

No 427/3

3/8"

D a 76 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 432M

1/2"

D 3/8" a

No 435

3/8"

No 50

1/2"

a sizes 19; 21; 22; 24; 27; 30;


32 mm

No 52

1/2" a sizes 16; 17; 18; 19; 22; 24; 27;


30; 32 mm

No 54

1/2"

a sizes 6; 7; 8; 10 mm

No 54X

1/2"

a sizes M6; 8; 12; 14

No 506

1/2"

D 300 mm

No 509/5

1/2"

D a 130 mm

Code

No 509/10

1/2"

D a 255 mm

96 83 02 21

No 510

1/2"

D a 71 mm

No 512

1/2"

'

'

'

'

'

'

'

'

'

'

'

'

'

'

R
g

'

3/8"

'

96 83 87 62

1665

'

No 54

a sizes 4; 5; 6; 7; 8; 10; 12; 14;


17 mm

No 54X

1/2" a sizes M5; M6; M8; M10; M12;


M14; M16

'

'

TCS 55/11/6

530 x 350 x 90 mm, 17 pieces


'

R
g

'

10100

'

3/4"

No 40TX
No 45TX

1/4"
3/8"

a sizes E4; E5; E6; E7; E8


a sizes E10; E12; E14

No 50TX

1/2"

a sizes E11; E16; E18; E20; E24

'

'

'

3/4" a sizes 22; 24; 27; 30; 32; 34; 36;


38; 41; 46; 50 mm

No 552

3/4"

No 556

3/4"

No 558

510 mm

No 559/8
No 559/16

3/4"
3/4"

D a 200 mm
D a 400 mm

No 568

1/2"

D 3/4" a

'

'

'

'

No 54TX

1/2"

No 1410
No 1411
No 1412
No 1413
No 1440
No 1441
No 1442
No 1443
No 1444
No 1445
No 1446
No 1427

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40
size T25 (65 mm)

No 415SGB

1/4"

'

'

a sizes T45; T50; T55; T60


'

593.30

No 55

'

No 514M

202.90

1/2"

'

1/2"

a sizes 17; 19 mm

TCS 54/54X/16

No 49
'

225.80

No 54
'

a sizes 3; 4; 5; 6 mm

'

b
63

Factory and workshop equipment, sets of tools


TCS TX/57 MF N

TCS 4620/4630

175 x 350 x 35 mm, 7 pieces


'

Code

'

96 83 82 78

490

'

350 x 350 x 75 mm, 57 pieces

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2; 3

'

Code

'

'

96 83 04 50

2060

'

521.40
'

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18;


E20 x E24

No 40TX
No 45TX

1/4"

No 49TX

3/8"

a sizes T40; T45

No 50TX

1/2"

a sizes E16; E18; E20; E24

No 54TX

1/2"

a sizes T50; T55; T60

No 415SGB

1/4"

No 412

1/4"

ba

'

'

'

'

'

'

'

175 x 350 x 35 mm, 6 pieces


'

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40
size T25 (65 mm)

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 10766

sizes T6; T7

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

'

'

No 1410
No 1411
No 1412
No 1413
No 1440
No 1441
No 1442
No 1443
No 1444
No 1445
No 1446
No 1427

'

Code

1/4"

'

TCS 4622/4632

a sizes E4; E5; E6; E7; E8


3/8" a sizes E10; E12; E14

No 442
'

b 3/8" a

96 83 87 83

845

'

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)

No 4632

sizes 2; 3

'

'

530 x 350 x 35 mm, 27 pieces


'

Code

'

96 83 11 68

TCS 50IMP/51IMP/19

2080

'

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
size 6 (1.6 x 10.0 x 200 mm)
size 7 (2.0 x 12.0 x 200 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

170 x 350 x 50 mm, 19 pieces

'

'

96 83 87 77

3960

'

No 50IMP
'

'

328.45

1/2" a sizes 10; 13; 15; 16; 17; 18; 19;


21; 22; 24; 27 mm

'

'

'

No 51IMP
'

'

1/2"

a sizes 13; 15; 17; 18; 19; 21; 22;


24 mm
'

'

64

220.80

No 4620

'

95.65

TCS 4620/4660VDE+10767

'

Code

70.25

TCS 4620/4660VDE

TCS 4622/4650+10760+10766

530 x 350 x 40 mm, 18 pieces

530 x 350 x 40 mm, 36 pieces

'
'

Code

'

Code

'

96 83 11 79

1689

'

193.40

96 83 11 96

1895

'

No 4620

'

No 4628
'

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
size 6 (1.6 x 10.0 x 200 mm)
size 7 (2.0 x 12.0 x 200 mm)

No 4632

size 4

'

No 4640

sizes 0; 1; 2

'

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

'

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

'

'

'

'

No 4630

size 1

No 4632

size 3

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

'

sizes 1; 2; 3

'

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 4 (1.6 x 10.0 x 175 mm)
size 5 (2.0 x 12.0 x 200 mm)

'

No 4630
'

No 4622

'

size 1 (0.4 x 2.5 x 60 mm)

252.90

'

'

TCS 4621/4734/16
TCS 4650

175 x 350 x 35 mm, 8 pieces

530 x 350 x 40 mm, 16 pieces

'

'

Code
96 83 20 98

1490

'

No 4621

'

size 0 (0.4 x 2.5 x 80 mm)


size 1 (0.5 x 3.5 x 90 mm)
size 2 (0.6 x 4.0 x 100 mm)
size 4 (1.0 x 6.5 x 140 mm)
size 5 (1.2 x 8.0 x 160 mm)

No 4631

size 1; 2

No 4632

size 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10506

0.8 x 4.0 x 300 mm

No 10518

1.0 x 5.5 x 410 mm

'

'

'

'

Code

'

'

233.90

96 83 87 67

350

'

No 4650
'

88.90

sizes T8; T9; T10; T15; T20; T25; T27; T30

TCS 4660/4665

175 x 350 x 40 mm, 6 pieces


'

'

'

No 12600

500 g

No 12922E

O 6 mm

'

'

Code

'

96 83 87 66

400

'

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)


size 3 (0.6 x 3.5 x 100 mm)
size 5 (1.0 x 5.5 x 125 mm)
size 6 (1.2 x 6.5 x 150 mm)

No 4665 VDE

size 1; 2

'

'

69.75

65

Factory and workshop equipment, sets of tools


TCS 4820/4830

TCS 10765/10768/12507/19

175 x 350 x 35 mm, 7 pieces


530 x 350 x 30 mm, 19 pieces

'

Code

'

'

96 83 81 84

555

'

No 4820

'

No 4830
'

79.75

Code

'

96 83 06 21

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm

1640

'

No 10765/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10768

sizes 2.5; 3; 4; 5; 6; 8; 10 mm

No 12507-2K

sizes 8; 10; 13 mm

'

sizes 1; 2; 3

'

TCS 4856

'

159.00

TCS 10769+10771/17

175 x 350 x 40 mm, 7 pieces


'

Code

'

96 83 87 55

447

'

No 4856
'

94.40

sizes T8; T9; T10; T15; T20; T25; T30


350 x 350 x 30 mm, 17 pieces

TCS 4724/4840+10767

'

Code

'

96 83 20 99

940

'

147.10

No 10769

sizes T9; T10; T15; T20; T25; T30; T40;


T45; T50

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30;


T40

'

530 x 350 x 45 mm, 24 pieces

'

'

Code
96 83 07 06

1755

'

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 4820

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.2 x 6.5 x 150 mm
1.6 x 10.0 x 200 mm
2.0 x 12.0 x 250 mm

'

'

'

'

sizes 1; 2; 3
size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

66

175 x 350 x 35 mm, 4 pieces


'

Code

'

96 83 81 79

1010

'

No 65 01 5 180
'

No 65 29 5 200
'

No 65 51 6 240
'

No 66 02 5 160

No 7756

'

'

No 12922E

271.85

No 4830
No 4840
'

'

TCS 65016602/4

'

O 6 mm

123.10

TCS 65016602/4N

TCS 65346545/6

175 x 350 x 35 mm, 4 pieces


'

Code

'

96 83 0 622

1080

'

137.80
350 x 350 x 30 mm, 6 pieces

No 65 01 5 180

'

'

No 65 29 5 200

Code

'

'

96 83 2 100

No 65 72 6 240

1070

'

'

157.50

No 65 34 5 280

No 66 02 5 160

'

'

No 65 35 5 200
'

TCS 65436564/3

No 65 43 4 001
No 65 43 4 002

'

No 65 45 4 001
No 65 45 4 002
'

TCS 102109/10956/10960/6

175 x 350 x 30 mm, 3 pieces

'

Code

'

96 83 81 80

815

'

78.10

No 65 43 4 002
'

175 x 350 x 40 mm, 6 pieces


No 65 45 4 002

'

'

Code

No 65 64 2 250

'

'

96 83 81 81

1500

'

TCS 65436546/4

No 10956

O 35 mm

No 10960

500 g

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

'

'

'

'

175 x 350 x 30 mm, 4 pieces

'

100.50

'

Code

'

96 83 0 608

626

TCS 102108/10960/10
94.60

No 65 44 4 021

No 65 45 4 002

175 x 350 x 40 mm, 10 pieces

'

No 65 43 4 002
'

'

'

'

No 65 46 4 021
'

Code

'

96 83 03 61

1569

'

200 mm

No 105

120 x 12 mm

No 108

115 x 2; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 175 x 4; 200 x 8 mm

No 10960

500 g

'

'

'

'

109.30

No 102

67

Factory and workshop equipment, sets of tools


TCS 102-108/11

TCS 102108/10957/10960/13

175 x 350 x 33 mm, 11 pieces


'

530 x 350 x 60 mm, 13 pieces

Code

'

96 83 87 54

1665

'

'

115.10

Code

'

96 83 01 77

No 102

150; 200; 250 mm

No 105

120 x 10; 120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

'

'

5540

'

No 102

200; 300 mm

No 103

175 mm

No 105

120 x 12 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 50 mm

No 10960

500; 800; 1000 g

'

'

'

'

TCS 102108/10957/12718/13
'

266.00

'

'

TCS 102108/10957/10960/16
530 x 350 x 40 mm, 13 pieces

'

Code

'

96 83 02 26

3730

'

236.70

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8; 200 x 8 mm

'

'

'

'

530 x 350 x 45 mm, 16 pieces


'

Code

'

96 83 06 09

3715

'

No 10957
'

No 10960
'

O 40 mm

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 40 mm

No 10960

500 g

'

500; 800 g

'

No 12718

'

'

'

TCS 102108/10957/10960 MF
'

'

No 12373
'

No 12600
'

500 g

No 12718
'

530 x 350 x 40 mm, 12 pieces

No 12931

'

Code
96 83 03 55

3343

'

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 40 mm

No 10960

500; 800 g

'

'

'

'

'

No 12718

68

'

230.40

No 102
'

3m

No 65 64 2 250

'

'

'

No 39 cars
'

285.00

400 mm

TCS 102108/10956/10960/18

TCS 13126/13127/2

175 x 350 x 60 mm, 2 pieces

530 x 350 x 55 mm, 18 pieces

'

Code

Code

'

96 83 06 20

3653

'

No 102

150 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

'

'

'

'

No 10956

O 50 mm

No 10960

300; 500 g

'

'

285 mm

No 10672

20 x 315 mm

'

475

'

199.40

No 13126
No 13127
'

TCS 1/3 MF

No 10356
No 10670

96 83 00 14

'

175 x 350 x 30 mm, empty inlay

'

'

'

264.70

'

'

Code

'

No 12374

83 82 03 60

'

30

'

24.60

No 12900N
'

No 12965N
'

TCS 1202513110/11

8003S

530 x 350 x 35 mm, 11 pieces


'

Code

'

96 83 87 59

2070

'

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

300 mm

'

'

'

'

'

Display unit

220 cm high, 100 cm wide, black,


RAL 9005, on request available in
green RAL 6024 and light grey
RAL 7035.

200.00

Consists of:
5 steel pegboards 100 x 40 cm,
1 base plate light grey,
2 base supports with adjusting
screws, 100 hooks 170 x 9 mm,
plastic coated,
25 hooks 170 x 6 mm,
plastic coated
Without columns and light unit
(please order separately: column
No 8024, single, or No 8029,
2 columns, and light unit No 8023L)

No 12320
'

No 12321
'

No 12718
'

No 12931
'

3m

No 12965N
'

No 13110
'

300 mm

'

Code

No

80 03 00 10
80 24 00 00
80 29 00 00
80 23 01 10

8003S
8024
8029
8023L

'

'

R
kg

(1 column)
(2 columns)
(light unit)

38.5
6
12
8.5

Price on request
Price on request
Price on request
Price on request

69

Factory and workshop equipment, sets of tools

Accessories for display units


8043

8024

Steel display tray for small components

Consisting of:
1 base 100 x 47 cm, RAL 7035,
made in one piece with grooves
front and back
1 pair hook-on supports for fixing
tray to perforated panel,
depth 47 cm, RAL 7035
2 dividers, clear plastic, for compartmented tray grooves, 100 x 7.5 cm
8 toothed dividers clear plastic, 47 x 7.5 cm
5 cross dividers, clear plastic, 8.4 x 7.5 cm
25 cross dividers, clear plastic, 16.8 x 7.5 cm
1 price rail, plastic, 100 cm
1 protective film for price rail
'

W
mm

H
mm

D
mm

1000

80

470

11.6

Code
'

88 10 01 11
'

'

Code

L
cm

80 24 00 00

220

'

kg

'

Price on request

W = Width, H = Height, D = Depth

8029

kg

Price on request

2 Columns

without base supports,


black RAL 9005

'

8043/1

Column

without base support,


black RAL 9005

Cover for steel display tray

protects against dust and pilfering,


for steel display tray No 8043

'

Code
'

88 10 01 10
'

W
mm

H
mm

D
mm

1005

35

450

4.6

kg

Price on request

W = Width, H = Height, D = Depth


'

8023L

Light unit

'

with connecting cable

Code

L
cm

80 29 00 00

220

12

'

'

8024-1
R

Column extension

kg

'

80 23 01 10

8.5

'

8023-2

Price on request

for extending the Column from


220 to 260 cm

'

Code

kg

Price on request

Angle bracket with cover

'

Code

L
cm

80 24 00 01

50

1.6

'

1 pair, for Light unit 8023L

'

8025

kg

Price on request

Base support

for column
'

Code

kg

'

80 23 00 12

1.1

'

8023-3

Price on request

Angle holder
'

Holder for two Light units 8023L


mounted side-by-side

Code
'

80 25 00 00
'

'

Code
'

80 23 00 13
'

70

R
kg

0.75

Price on request

R
kg
3

Price on request

8026S

Steel pegboard

8017

100 x 40 cm, black RAL 9005,


on request available in
green RAL 6024 and
light grey RAL 7035

Plastic coated hook

25 pieces,
170 x 6 mm

'
'

Code

kg

'

'

80 26 00 03

3.5

'

Price on request

88 10 01 05

1040

'

8027

Base plate

8022N

Code

Price on request

Pliers/wrench hook

metal, light grey RAL 7035

'

Code

kg

'

80 27 00 00

5.6

'

8042

Price on request

Drawer

'

for storing larger parts under the


base plate.
Steel sheet, light grey,
W 100 x H 18 x D 47 cm

'

88 10 01 26

108

'

8044

'

Code

kg

'

80 42 00 00

'

8015

Code

Price on request

Price on request

Toothed divider

47 x 7.5 cm,
for flexible arrangement of
compartments in the display tray
'

Plastic coated hook

Code

25 pieces,
55 x 6 mm

'

88 10 01 12

186

'

8045

Price on request

Cross divider

16.8 x 7.5 cm,


for flexible arrangement of
compartments in the display tray
'

Code

'

88 10 01 03

600

'

8016

Price on request

'

Code

Plastic coated hook

'

88 10 01 18

50 pieces,
170 x 9 mm

47

'

8046

Price on request

Cross divider

8.4 x 7.5 cm,


for flexible arrangement of
compartments in the display tray
'

Code
'

88 10 01 04
'

R
g

3850

Price on request

'

Code
'

88 10 01 14
'

R
g

19

Price on request

71

Factory and workshop equipment, sets of tools


8004S

Corner display unit, 90

ST 97

Consists of:
5 steel pegboards, left, 40 cm high,
black RAL 9005, 5 steel
pegboards, right, 40 cm high,
black RAL 9005.
On request available in green RAL
6024 and
light grey RAL 7035,
1 base plate, metal,
light grey RAL 7035.
1 base support with adjusting
screws.
Without columns and corner cover
(please order separately column
No 8024, single, or No 8029,
2 columns, and cover No 8023-4)

SERVOMAT display stand for sockets

free standing or for hanging on


pegboards, variable configuration
possible for sockets with
1/4, 3/8 and 1/2" u square drive.
Display Stand is delivered with
17 dividing elements.
Further dividing elements can be
ordered for an individual arrangement.
Details: sheet metal, green painted, with acryl-glass cover,
660 x 250 x 200 mm.
Supplied without sockets.
'

Code
'

82 13 00 01
'

6380

Price on request

ST 97 R/1201 Standard partitions


for SERVOMAT ST 97
'

Code

partition height

88 13 00 01

12 mm, straight

'

'

R
g

20

10

Price on request

ST 97 R/1202 Standard partitions


for SERVOMAT ST 97
'
'

Code
'

80 04 00 10
'

D
mm
950

W
mm
660

H
mm
2200

D
mm
850

R
kg

33.5

Code

partition height

88 13 00 02

12 mm, bent

'

Price on request

'

D = Diagonal, W = Width of pegboard, H = Height, D = Depth


'

8023-4

R
g

22

10

Price on request

ST 97 R/2201 Standard partitions


for SERVOMAT ST 97

Cover

for use with Corner display unit


No 8004S.

'

Code

partition height

88 13 00 03

22 mm, straight

'

'

R
g

40

10

Price on request

ST 97 R/2202 Standard partitions

'

Code

for SERVOMAT ST 97

kg

'

80 23 00 14

'

Price on request

'

Code

partition height

88 13 00 04

22 mm, bent

'

Display stands
ST 11

'

Display stand for pliers

for 72 pairs of pliers, matt black


lacquered, three-tier design.
Counter or wall display.
Supplied without pliers.

'

Code

W
mm

H
mm

D
mm

82 08 00 01

500

200

380

4.5

'

'

W = Width, H = Height, D = Depth


'

72

kg

Price on request

R
g

41

10

Price on request

Spanners

Spanners

Strong, extremely tough and durable.


STAHLWILLE spanners

Conventional spanners
When force is applied to a spanner, the greatest force acts on the joint between the
jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into
consideration. In the context of normal hard work, this can lead to the tool

breaking, causing considerable personal injury.


STAHLWILLE spanners
To reduce the danger of breakage, we add more material where the greatest loads
are to be found and take it away from the places that are not under such stress.
In this way, we are able to manufacture extremely sturdy, slim and light tools
which also facilitate working in conned spaces due to their compact designs.

Extremely resilient, remarkably durable


1 Drop-forged
1 Optimum

from high-grade special steels.

hardening in continuous furnaces with no scale build-up or skin

decarburisation.
1 Gentle

quenching in oil.

Light and easy to handle


1 High

resistance to bending and low weight thanks to STAHLWILLE's typical

double-T prole.
1 Snug-tting,

Key benets when tightening and loosening screws


1 Tougher

than any screw thanks to the forged double hex.

1 Thinner

than conventional rings facilitating work in conned spaces.

1 Higher

skin-friendly surfaces thanks to STAHLWILLE's rounded nish.

than standard nuts prevents the spanner jamming on the nut.

Quality assured
STAHLWILLE's Quality Assurance System was awarded an internationally
recognised certicate in accordance with DIN ISO 9001 by the DQS
(German Association for the Certication of Quality Assurance Systems).

This one and the next one:


tailored to t perfect
chrome plating

74

Nm

Test results STAHLWILLE combination spanners No 13 (open-jaw)

Nm

2000

2000

1800

1800

1600

1600

1400

1400

1200

1200

1000

1000

800

800

600

600

400

400

200

200

0
Size
Thread M

Test results STAHLWILLE combination spanners No 13 (ring)

0
6

8 10 13 16 17 18 19 21 22 24 27 30 32 34 36 41

3,5 5

8 10 *10 12 *12 14 *14 16 18 20 *22 22 24 27

Size
Thread M

8 10 13 16 17 18 19 21 22 24 27 30 32 34 36 41

3,5 5

8 10 *10 12 *12 14 *14 16 18 20 *22 22 24 27

Test results for STAHLWILLE

Test results for STAHLWILLE

Test results to DIN 899 or ISO 1711

Test results to DIN 899 or ISO 1711

Clamping torque for 8.8 screws at 100% tensile yield strength ( = 0.14)

Clamping torque for 12.9 screws at 100% tensile yield strength ( = 0,14)

*Reference to older screw thread standards

Load zones in
standard-quality spanners

Load zones in spanners


by STAHLWILLE

Absolutely resistant to bending


thanks to the double-T prole

Open-jaw spanners in oil

Snug-tting, skin-friendly surfaces


thanks to STAHLWILLE's rounded
nish

STAHLWILLE No 8 striking face


double hex box-spanners are
tougher, thinner and higher.

75

Spanners
10

Double open ended spanners

10a

DIN 3110, ISO 10102 (metric sizes),


Chrome Alloy Steel, chrome plated.

Double open ended spanners

'

A
"

L
mm

b1
mm

b2
a
mm mm

40 43 16 20
40 43 20 24
40 43 24 28
40 43 28 32

1/4 x 5/16
5/16 x 3/8
3/8 x 7/16
7/16 x 1/2

140
140
155
170

16
18
23
26

18
23
26
30

4
4.5
4.8
5.3

21
34
48
58

10
10
10
10

5.05
7.95
5.95
8.50

40 43 32 34
40 43 34 36
40 43 35 38
40 43 36 38

1/2 x 9/16
9/16 x 5/8
19/32 x 11/16
5/8 x 11/16

190
205
205
205

30
32
35
36

32
36
40
40

5.3
5.8
5.8
5.8

73
96
105
101

10
10
10
10

7.35
8.20
8.80
8.80

40 43 36 40
40 43 38 40
40 43 38 42
40 43 40 44

5/8 x 3/4
11/16 x 3/4
11/16 x 13/16
3/4 x 7/8

220
220
235
235

36
40
40
42

42
42
47
49

6.7
6.7
7.3
7.3

135
135
167
177

10
10
10
10

9.10
10.70
10.40
10.90

40 43 41 42
40 43 44 46
40 43 46 48
40 43 52 58

25/32 x 13/16
7/8 x 15/16
15/16 x 1
1 1/8 x 1 5/16

235
250
270
300

45
49
53
64

47
53
55
75

7.3
7.8
8.3
9.4

190
235
303
502

10
10
5
5

10.90
12.70
14.50
19.60

Code
'

1
'

L
mm

b1
mm

b2
mm

a
mm

R
g

40 03 04 05
4x5
40 03 55 07 5.5 x 7
40 03 06 07
6x7
40 03 07 08
7x8

100
120
120
140

12.5
14.8
15.5
17

14
17
17
18

3.4
3.7
3.7
4.0

11
19
17
25

10
10
10
10

5.25
5.15
4.35
5.65

40 03 08 09
40 03 08 10
40 03 10 11
40 03 10 12

8x9
8 x 10
10 x 11
10 x 12

140
140
155
170

18
18
23
23

21
23
26
28

4.0
4.5
4.8
5.3

21
33
40
51

10
10
10
10

4.80
5.30
4.70
6.45

40 03 10 13
40 03 11 13
40 03 12 13
40 03 12 14

10 x 13
11 x 13
12 x 13
12 x 14

170
170
170
170

23
26
28
28

30
30
30
32

5.3
5.3
5.3
5.3

57
55
64
63

10
10
10
10

6.10
7.00
5.65
6.80

40 03 13 14
40 03 13 15
40 03 13 17
40 03 14 15

13 x 14
13 x 15
13 x 17
14 x 15

190
190
205
190

30
30
30
32

32
35
38
35

5.3
5.3
5.8
5.3

70
73
92
81

10
10
10
10

6.90
6.95
7.30
6.05

40 03 14 17
40 03 16 17
40 03 16 18
40 03 17 19

14 x 17
16 x 17
16 x 18
17 x 19

205
205
220
220

32
36
36
38

38
38
40
42

5.8
5.8
6.7
6.7

99
100
125
131

10
10
10
10

7.60
6.65
8.40
7.70

40 03 18 19
40 03 18 21
40 03 19 22
40 03 20 22

18 x 19
18 x 21
19 x 22
20 x 22

220
235
235
235

40
40
42
45

42.5
47
49
49

6.7
7.3
7.3
7.3

147
170
179
185

10
10
10
10

7.70
10.40
9.25
8.75

40 03 21 23
40 03 21 24
40 03 22 24
40 03 24 26

21 x 23
21 x 24
22 x 24
24 x 26

250
250
250
270

47
47
49
53

51
53
53
57.5

7.8
7.8
7.8
8.3

225
215
232
293

5
5
5
5

40 03 24 27
40 03 25 28
40 03 27 30
40 03 27 32

24 x 27
25 x 28
27 x 30
27 x 32

280
285
300
300

53
55
60
60

60
62
66
70

8.3
8.3
9.4
9.4

299
309
412
418

40 03 30 32
40 03 30 34
40 03 32 36
40 03 34 36

30 x 32
30 x 34
32 x 36
34 x 36

300
300
325
325

66
66
70
75

70
75
80
80

9.4
9.4
10
10

40 03 36 41
40 03 41 46

36 x 41
41 x 46

375
425

80
88

88
11
94.5 12

Code
'

mm

'

'

Sets: Double open ended spanners

'

Code

No

9.70
11.70
10.50
12.90

96 40 03 05

10/8

96 40 03 14

10/9

5
5
5
5

11.70
14.90
17.50
18.00

96 40 03 07

10/10

96 40 03 06

10/12

451
480
546
619

5
5
5
1

16.10
19.40
28.90
30.70

800
1030

1
1

38.60
53.00

'

96 40 43 06

10a/7

96 40 43 07

10a/11

'

Content
mm/"
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22; 21 x 24
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22; 24 x 27; 30 x 32
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22; 21 x 23; 24 x 27; 25 x 28;
30 x 32
1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4; 11/16 x 13/16;
7/8 x 15/16; 1 1/8 x 1 5/16
1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8; 19/32 x 11/16;
5/8 x 3/4; 11/16 x 13/16; 3/4 x 7/8; 25/32 x 13/16;
7/8 x 15/16; 1 1/8 x 1 5/16

Standard packing: clear view wallet.


'

76

R
g

745

48.65

945

60.35

1540

76.45

2125 101.05
1242

70.15

1870 108.95

ES 10/10, 5.5x722x24 mm

TCS 10/10, 6x730x32 mm MF

175 x 350 x 75 mm, 10 pieces

175 x 350 x 60 mm, 10 pieces

'

'

Code
'

96 83 81 30

1100

'

No 10

83 81 20 33
'

Empty tray

106

'

84.75

sizes 5.5 x 7; 8 x 10; 10 x 12; 11 x 13;


12 x 14; 14 x 17; 17 x 19; 18 x 21;
19 x 22; 22 x 24 mm

'

Code

96 83 03 53

1437

'

No 10

104.25

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm

'

8.60

TCS 10/10, 6x724x27 mm

ES 10/10, 6x730x32 mm

175 x 350 x 66 mm, 10 pieces


'

175 x 350 x 70 mm, 10 pieces


Code

'

Code
96 83 81 26

1515

'

No 10

'

Empty tray

112

1287

'

No 10

85.10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

'

83 81 20 22

96 83 81 87

'

'

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 24 x 27 mm

'

TCS 10/10, 6x724x27 mm MF

8.65

TCS 10/10, 6x730x32 mm

175 x 350 x 70 mm, 10 pieces


'

Code

'

96 83 03 58

1320

'

No 10

350 x 350 x 30 mm, 10 pieces

TCS 10+13+24/30

'

96 83 81 82

1550

'

No 10

'

'

96.65

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 24 x 27 mm

'

Code

91.75

104.65

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

530 x 350 x 75 mm, 30 pieces


'

Code

'

96 83 06 05

3724

'

No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 21; 22; 24; 27; 30;
32 mm

No 24

size 10 x 11 mm

'

'

'

377.55

77

Spanners
TCS 10a/9

13

Combination spanners OPEN-BOX

DIN 3113 form A/ISO 7738 form A (metric sizes),


Chrome Alloy Steel, chrome plated.

175 x 350 x 70 mm, 9 pieces


'

Code

'

96 83 87 79

1555

'

114.35

sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;


x 11/16; 5/8 x 3/4; 3/4 x 7/8;
25/32 x 13/16; 15/16 x 1; 1 1/8 x 1 5/16"

No 10a

19/32

'

'

Plastic-wallets for sets of spanners


Code

'

Code

wallet
No

for set
No

83 40 03 06
83 40 46 01
83 40 06 01
83 41 07 04

010/12
012/10
012/15
023/8

10/12*, 10a/11*
12/10 Pc
12/15 Pc, 12a/13 Pc
23/8*

276
41
68
123

'

'

'

19.20
6.90
10.20
15.20

* Plastic-wallets must be ordered separately!


'

40 08 55 00
40 08 06 06
40 08 07 07
40 08 08 08
1

Clip holder for sets of spanners

83 40 08 06

13/6

'

* to be discontinued
'

40

6.85

R
g

100
105
110
115

14.8
9.2
15.5
9.9
17
11.3
18
12.4

3.5
3.6
3.9
4.2

5.8
6
6
7

13
15
20
21

10
10
10
10

6.95
6.60
6.60
6.50

7
7
8
8.5

27
35
43
46

10
10
10
10

7.40
7.30
7.65
8.20

40 08 13 13
40 08 14 14
40 08 15 15
40 08 16 16

13
14
15
16

160
165
170
180

30
32
35
36

19.1
20.6
21.9
23.2

5.3
5.3
5.3
5.8

8.5
8.5
8.5
10

57
68
73
89

10
10
10
10

8.90
8.95
10.70
11.40

40 08 17 17
40 08 18 18
40 08 19 19
40 08 20 20

17
18
19
20

190
200
230
230

38
40
42
45

24.6
26
27.5
29

5.8
6.7
6.7
7

10
11.5
11.5
13

99
126
142
176

10
10
10
10

11.90
13.40
14.00
15.90

40 08 21 21
40 08 22 22
40 08 23 23
40 08 24 24

21
22
23
24

260
260
280
280

47
49
53
53

30.3
31.8
33.5
34.9

7.3
7.3
7.8
7.8

13
13
14
14

216
220
251
254

10
10
5
5

16.50
17.10
22.80
19.30

40 08 25 25
40 08 26 26
40 08 27 27
40 08 28 28

25
26
27
28

300
300
300
320

55
57.5
60
62

36.3
37.8
39.2
40.6

8.4
8.4
8.4
8.4

14.5
14.5
14.5
14.5

281
315
345
368

5
5
5
5

24.80
25.50
23.00
30.10

40 08 29 29
40 08 30 30
40 08 32 32
40 08 34 34

29
30
32
34

330
330
360
450

64
66
70
80

41.9
43.2
45.8
48

8.9
8.9
9.4
9.4

16
16
16.5
17

420
404
484
683

5
5
5
1

30.60
28.20
30.90
46.40

40 08 36 36
40 08 38 38
40 08 41 41
40 08 46 46

36
38
41
46

460
480
480
500

88
87
88
94.5

50.8
53.6
57.8
65.2

51.50
67.00
65.50
93.00

40 08 50 50
40 08 55 55
40 08 60 60

50
55
60

530 103
560 114
590 125

'

78

a2
mm

4.5
4.8
4.8
5.3

Code

a1
mm

13.4
14.8
16.4
17.8

'

d
mm

21
23
26
28

5.5
6
7
8

b
mm

120
125
135
140

for set
No

L
mm

9
10
11
12

'

mm

40 08 09 09
40 08 10 10
40 08 11 11
40 08 12 12
1

013/6KH*

10
11
11
13

18
19
19
20

787
915
1055
1352

1
1
1
1

73
14
81
15
89.8 16

21
22
24

1700
2193
2825

1 129.00
1 159.00
1 205.00

13a

Combination spanners OPEN-BOX

Sets: Combination spanners OPEN-BOX

'

Code

A
"

'

L
mm

b
mm

d
mm

a1
mm

a2 R
mm g

14
14
14
14

9.8
9.8
9.8
9.8

3
3
3
3

3.2
3.2
3.2
3.2

10
10
10
9

5
5
5
5

9.10
9.10
8.85
9.25

40 48 12 12
40 48 13 13
40 48 14 14
40 48 15 15

3/16
13/64
7/32
15/64

95
95
95
95

40 48 16 16
40 48 18 18
40 48 20 20
40 48 22 22

1/4
9/32
5/16
11/32

105
110
115
120

15.5
17
18
21

10.2
11.3
12.4
13.4

3.6
3.9
4.2
4.5

6
6
7
7

14
17
20
26

10
10
10
10

7.10
8.40
7.10
8.50

40 48 24 24
40 48 28 28
40 48 32 32
40 48 34 34

3/8
7/16
1/2
9/16

125
135
160
165

23
26
30
32

14.3
16.4
18.8
20.6

4.8
4.8
5.3
5.3

7
8
8.5
8.5

32
41
57
68

10
10
10
10

8.15
8.70
9.55
10.70

40 48 35 35
40 48 36 36
40 48 38 38
40 48 40 40

19/32
5/8
11/16
3/4

170
180
200
230

35
37
40
42

21.9
23.2
25.3
27.5

5.3
8.5
5.8 10
6.7 11.5
6.7 11.5

74
88
116
144

10
10
10
10

13.00
12.00
14.30
15.60

40 48 41 41
40 48 42 42
40 48 44 44
40 48 46 46

25/32
13/16
7/8
15/16

235
260
260
280

45
47
49
53

29
30
31.8
34.9

7
7.3
7.3
7.8

13
13
13
14

175
204
217
255

5
5
5
5

17.60
17.20
19.40
21.60

40 48 48 48
40 48 50 50
40 48 52 52
40 48 54 54

1
1 1/16
1 1/8
1 3/16

300
300
330
335

55
60
64
66

37.2
39.2
41.4
43.2

8.4
8.4
8.9
8.9

14.5
14.5
16
16.5

286
327
380
398

5
5
5
1

21.70
25.50
29.90
35.90

40 48 56 56
40 48 58 58
40 48 60 60
40 48 62 62

1 1/4
1 5/16
1 3/8
1 7/16

360
450
460
460

70
74
80
80

45.8
9.4
47
9.6
49.3 10
51.4 10

16.5
17
18
18

504
617
796
770

5
1
1
1

34.60
43.70
57.50
57.50

40 48 64 64
40 48 66 66
40 48 69 69
40 48 70 70

1 1/2
1 5/8
1 13/16
1 7/8

480 87
480 88
500 94.5
530 103

53.6
58
65.3
68.4

11
11
13
14

19
19
20
21

961
1021
1343
1779

1 69.50
1 75.50
1 105.00
1 120.00

40 48 72 72

530 103

74

14

21

1817

1 139.00

'

2
'

Code

No

Content
mm/"

96 40 08 13
96 40 08 01
96 40 08 08
96 40 08 02

13/6 3)
13/9
13/10KT 1)
13/11

7; 8; 10; 13; 17; 19


9; 10; 11; 12; 13; 14; 17; 19; 22
8; 9; 10; 11; 12; 13; 14; 15; 17; 19
8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22

430
758
746
915

62.05
91.40
98.10
108.60

2236

203.55

1620

175.80

1493

179.00

4705

414.20

959
750

107.45
108.30

3210

310.60

'

96 40 08 03 13/15
96 40 08 16 13/16 2)
96 40 08 04 13/17
96 40 08 05 13/26 2)
1

6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22; 24;


27; 30; 32
7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18;
19; 21; 22; 24
6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17;
18; 19; 20; 21; 22
6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17;
18; 19; 20; 21; 22; 23; 24; 25; 26; 27; 28;
29; 30; 32

7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8


96 40 48 03 13a/8
96 40 48 12 13a/10KT 1) 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4
96 40 48 04 13a/20 2) 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32;
5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16;
1 1/8; 1 1/4
'

Standard packing: clear view wallet.


(Coloured plastic-wallets: page 78)
1
) carton with clear view cover
2
) packed in carton
3
) in convenient clip holder
'

ES 13/10, 615 mm

STAHLWILLE AS-Drive
The rings of STAHLWILLE combination spanners and
double ended ring spanners are equipped with the
AS-Drive* profile: this permits high transmission of
forces to the lands of nuts and bolts without damaging
them. No longer will you have to worry about stripping
the corners off nuts and bolts.

175 x 350 x 40 mm, 10 pieces


'

Code

'

96 83 81 27

525

'

*Anti-Slip-Drive

No 13
'

83 81 20 23
'

Empty tray

87.45

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;


15 mm
105

8.65

79

Spanners
ES 13/8, 1624 mm

TCS 13/17, 624 mm MF

175 x 350 x 54 mm, 8 pieces


'

Code

'

96 83 81 28

1440

'

No 13

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm

'

83 81 20 24

'

128.15

Empty tray

112

350 x 350 x 60 mm, 17 pieces


'

8.65

Code

'

96 83 03 51

ES 13/5, 2732 mm

1552

'

No 13

220.10

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24 mm

'

TCS 13/21, 634 mm

530 x 350 x 30 mm, 5 pieces


'

Code

'

96 83 81 04

2280

'

165.60

530 x 350 x 75 mm, 21 pieces


'

No 13

sizes 27; 28; 29; 30; 32 mm

'

83 81 20 40
'

Empty tray

287

22.80

Code

'

96 83 01 74

3571

'

No 13

TCS 13/18, 624 mm

343.90

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24; 27; 30; 32;
34 mm

'

TCS 13/25, 5.5-34 mm

530 x 350 x 35 mm, 18 pieces


'

Code

'

96 83 81 83

1850

'

231.30

530 x 350 x 80 mm, 25 pieces


'

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24 mm

'

Code

'

96 83 20 96

4550

'

TCS 13/17, 624 mm

No 13

'

350 x 350 x 60 mm, 17 pieces


'

Code

'

96 83 01 64

1615

'

No 13
'

80

210.60

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24 mm

432.75

sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22; 23; 24;
27; 29, 30; 32; 34 mm

TCS 12+13+14/29

14

Combination spanners OPEN-BOX, long

DIN 3113 form B/ ISO 7738 form B, Chrome Alloy Steel, chrome plated.

530 x 350 x 80 mm, 29 pieces


'

Code

'

96 83 01 93

3752

'

418.45

No 12

sizes 5.5; 12; 14 mm (2x)

No 13

sizes 7; 11 mm (2x);
6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18;
19; 20; 22; 24; 30; 32; 36 mm (1x)

'

'

No 14

'

size 17 mm

'

Code

b
A L
mm mm mm

40 10 06 06
40 10 07 07
40 10 08 08
40 10 09 09

6
7
8
9

125
135
145
155

14
9.5
16 10.8
17.5 12.1
19 13.3

4.5
5
5
5.5

6
7
7
8

40 10 10 10
40 10 11 11
40 10 12 12
40 10 13 13

10
11
12
13

165
180
180
195

21
23.5
25.5
27.5

14.6
15.9
17.3
18.6

40 10 14 14
40 10 15 15
40 10 16 16
40 10 17 17

14
15
16
17

210
215
230
240

29.5
31
33
35

40 10 18 18
40 10 19 19
40 10 20 20
40 10 21 21

18
19
20
21

255
265
280
280

40 10 22 22
40 10 24 24
40 10 27 27
40 10 30 30

22
24
27
30

40 10 32 32
40 10 34 34
40 10 36 36
40 10 41 41

32
34
36
41

'

TCS 13a/19

350 x 350 x 55 mm, 19 pieces


'

Code

'

96 83 87 78

2000

'

272.75

sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8;


7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32;
13/16; 7/8; 15/16; 1"

No 13a

'

'

d
a1
a2
t
mm mm mm mm

7
8
8
9

18
25
28
34

10
10
10
10

7.50
6.85
6.80
8.45

5.5
8
6
9
6
9
6.5 10

9
10
10
11

43
55
61
83

10
10
10
10

7.60
8.10
8.70
9.45

20.1
21.4
22.7
24.1

6.5
7
7
7.5

10
11
11
12

11
13
14
15

88
109
108
151

10
10
10
10

9.65
11.20
12.00
12.40

37
39.5
41.5
43

25.5
27
28.5
29.8

7.5
8
8
8.5

12
13
13
13

16
18
19
19

151
190
219
244

10
10
10
10

14.10
14.70
16.00
16.90

300
330
385
415

45
50
56
63

31.3 8.5 14
34.3 9.5 14
38.6 10.5 16
42.6 12
18

20
22
24
26

268
363
502
645

10
5
5
5

17.80
20.30
22.70
29.20

430
460
480
560

67
72
74
84

45.2
48
50.8
57.8

27
666
27
900
28
951
32 1322

5
1
1
1

31.70
45.10
54.50
68.50

12
13
13
14

18
18
19
20

Additional spanner opening see page 94


'

TCS 13a/23

STAHLWILLE AS-Drive
530 x 350 x 35 mm, 23 pieces
'

Code

'

96 83 08 85

2726

'

No 13a

'

357.90

sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;


11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;
25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8"

The rings of STAHLWILLE combination spanners and


double ended ring spanners are equipped with the
AS-Drive* profile: this permits high transmission of
forces to the lands of nuts and bolts without damaging
them. No longer will you have to worry about stripping
the corners off nuts and bolts.
*Anti-Slip-Drive

81

Spanners
Sets: Combination spanners OPEN-BOX, long

TCS 14/5, 1721 mm

175 x 350 x 30 mm, 5 pieces


'

Code

'

96 83 81 88

1065

'

No 14

sizes 17; 18; 19; 20; 21 mm

'

93.80

TCS 14/8, 816 mm

'

Content
mm

Code

No

96 40 10 08
96 40 10 09
96 40 10 07
96 40 10 06

14/6 2)
10; 13; 17; 19; 22; 24
14/9 2)
10; 11; 13; 17; 19; 22; 24; 27; 30
14/10 KT 1) 8; 10; 11; 12; 13; 14; 16; 17; 18; 19
14/11
8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22

'

1175
2395
1235
1465

82.25
142.25
110.30
114.85

96 40 10 04 14/15
6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22; 24; 27; 30; 32 3370
96 40 10 10 14/15N 2) 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22;
24; 27; 30
3165
96 40 10 05 14/17
6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18;
19; 20; 21; 22
1874

212.25

175 x 350 x 30 mm, 8 pieces


'

Code

'

96 83 81 89
214.80

660

'

No 14

93.20

sizes 8; 10; 11; 12; 13; 14; 15; 16 mm

'

188.20

'

15*

Standard packing: clear view wallet


1
) packed in plastic with transparent cover
2
) packed in carton

Combination spanners OPEN-BOX

'

SoftGRIP

ES 14/10, 615 mm

long, DIN 3113 form B/ISO 7738 form B, Chrome Alloy Steel,
chrome plated.

175 x 350 x 39 mm, 10 pieces


'

Code

'

'

96 83 81 05

700

'

No 14
'

83 81 20 34
'

Empty tray

92.95

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;


15 mm
110

Code

mm

L
b
d
a1
a2
t
R
mm mm mm mm mm mm g S

40 11 06 06
40 11 09 09
40 11 16 16
40 11 18 18

6
9
16
18

125
155
230
255

14
19
33
37

9.5
13.3
22.7
25.5

40 11 24 24
40 11 30 30
40 11 32 32
40 11 34 34

24
30
32
34

330
415
430
460

50
63
67
72

34.3 9.5
42.6 12
45.2 12
48 13

'

8.65

ES 14/8, 1624 mm

'

* to be discontinued
'

175 x 350 x 51 mm, 8 pieces


'

Code

'

96 83 81 06

1820

'

No 14
'

83 81 20 35
'

82

Empty tray

132.85

sizes 16; 17; 18; 19; 20; 21; 22; 24 mm


112

8.65

4.5 6
5.5 8
7 11
7.5 12
14
18
18
18

7
9
14
16

18
34
120
160

10
10
10
10

6.85
8.35
13.40
15.00

22
26
27
27

363
625
666
900

5
5
5
1

22.70
29.80
33.30
51.00

20

Double ended ring spanners

Sets: Double ended ring spanners

StahlwilleSTABIL

offset.

StahlwilleSTABIL
offset, DIN 838/ISO 10104 (metric sizes),
Chrome Alloy Steel, chrome plated.

2
'

L
mm

d1
mm

41 04 06 07 6 x 7
41 04 08 09 8 x 9
41 04 08 10 8 x 10
41 04 10 11 10 x 11

165
180
180
200

10.5
13.1
13.1
15.8

11.8
14.5
15.8
17.2

6
7
7
9

7
8
9
9

41 04 10 13
41 04 12 13
41 04 13 17
41 04 14 15

10 x 13
12 x 13
13 x 17
14 x 15

220
220
245
245

15.8
18.6
20
21.3

20
9
20
9
25.3 10
22.6 10

41 04 16 17
41 04 17 19
41 04 18 19
41 04 18 21

16 x 17
17 x 19
18 x 19
18 x 21

255
270
275
300

23.9
25.3
26.6
26.6

25.3
28
28
30.7

41 04 19 22
41 04 20 22
41 04 21 23
41 04 21 24

19 x 22
20 x 22
21 x 23
21 x 24

300
300
315
330

28
29.4
30.7
30.7

41 04 22 24
41 04 24 26
41 04 24 27
41 04 25 28

22 x 24
24 x 26
24 x 27
25 x 28

330
330
330
350

41 04 27 30
41 04 27 32
41 04 30 32
41 04 30 34

27 x 30
27 x 32
30 x 32
30 x 34

360
360
365
365

Code
'

mm

d2 a1 a2
t
mm mm mm mm

'

18
20
21
23

46
62
61
93

10
10
10
10

8.55
8.80
10.80
9.50

10
10
12
12

25
25
27
27

122
126
169
163

10
10
10
10

11.60
10.20
13.40
11.00

11
12
12
12

12
13
13
13

27
29
29
31

181
220
228
279

10
10
10
10

12.20
14.10
13.90
18.90

32.1
32.1
33.4
34.7

13
13
13
13

14
14
14
14

31
31
31
34

315
317
312
384

10
5
5
5

17.80
16.30
20.50
22.00

32.1
34.7
34.7
36

34.7
37.3
38.6
40

14
14
14
14

14
15
15
15

34
34
34
34

368
427
447
414

5
5
5
5

21.60
23.90
20.90
25.50

38.3
39.3
42.6
42.6

42.6
47.2
45.4
48

15
15
15
15

15
16
16
16

37
37
37
37

595
596
603
670

5
5
5
1

29.30
28.20
27.10
32.10

17
19

18
20

40 1015
45 1709

41 04 36 41 36 x 41 440 53
60
41 04 46 50 46 x 50 535 65.2 73
'

Content
mm/"

Code

No

96 41 04 08

20/7N 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;


18 x 19;
20/8 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22
20/9 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22; 21 x 24
20/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22; 24 x 27; 30 x 32

'

96 41 04 05
96 41 04 09
96 41 04 07
1

96 41 04 06

96 41 44 02
96 41 44 05
'

930

74.15

1291

90.45

1650

112.45

2331

138.45

20/12 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;


18 x 19; 20 x 22; 21 x 23; 24 x 27;
25 x 28; 30 x 32
3137
20a/6 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4; 11/16 x 13/16;
7/8 x 15/16
1244
20a/10 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8; 19/32 x 11/16;
5/8 x 3/4; 11/16 x 13/16; 3/4 x 7/8; 25/32 x 13/16; 7/8 x 15/16 2260

184.45
94.00
163.40

Standard packing: carton.


(Coloured plastic-wallets: page 78)
'

ES 20/8, 6x719x22 mm

1 57.00
1 108.00
175 x 350 x 30 mm, 8 pieces

20a

Double ended ring spanners

'

'

"

L
mm

d1
mm

d2 a1
a2
t
mm mm mm mm

R
g

41 44 16 20
41 44 24 28
41 44 32 34
41 44 34 36

1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
9/16 x 5/8

180
200
220
245

11.8
15.8
20
21.3

13.1
17.2
21.3
25.3

7
9
9
10

7
9
10
12

20
23
25
27

61
88
131
168

10
10
10
10

10.30
11.70
13.10
13.80

41 44 35 38
41 44 36 40
41 44 38 42
41 44 40 44

19/32 x 11/16
5/8 x 3/4
11/16 x 13/16
3/4 x 7/8

255
270
300
300

23.9
23.9
25.3
28

25.3
28
30.7
32.1

11
12
12
13

12
13
13
14

27
29
31
31

177
235
280
299

10
10
5
5

14.80
15.90
19.80
19.40

41 44 41 42
41 44 44 46
41 44 46 48
41 44 52 58

25/32 x 13/16
7/8 x 15/16
15/16 x 1
1 1/8 x 1 5/16

300
330
330
365

29.4
32.1
34.7
42.6

32.1
34.7
37.3
45.4

13
14
14
15

14
14
15
16

31
34
34
37

333
363
419
581

5
5
5
1

21.40
23.20
25.70
31.50

Code
'

'

Code

'

96 83 81 67

1266

'

No 20
'

83 81 20 83
'

Empty tray

105.80

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22 mm
103

8.85

83

Spanners
12

ES 20/10, 6x730x32 mm

Small double open ended


spanners ELECTRIC

Chrome Alloy Steel, chrome plated.

530 x 350 x 44 mm, 10 pieces


'

Code

'

96 83 81 07

2620

'

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

'

83 81 20 44
'

161.25

Empty tray

309

22.80

'

Code

mm

L
mm

b
mm

a
mm

R
g

40 06 32 32
40 06 35 35
40 06 04 04
40 06 45 45

3.2
3.5
4
4.5

70
70
70
70

10.5
10.5
10.5
10.5

2
2
2
2

5
5
5
5

10
10
10
10

7.40
7.40
7.25
7.25

40 06 05 05
40 06 55 55
40 06 06 06
40 06 07 07

5
5.5
6
7

78
78
78
91

12.6
12.6
12.6
14.7

2
2
2
2

7
7
6
9

10
10
10
10

7.25
7.25
7.25
7.25

'

TCS 20/8, 6x719x22 mm

40 06 08 08
40 06 09 09
40 06 10 10
40 06 11 11

8
9
10
11

96
103
105
116

16.8
18.9
21
24.2

3
3
3
3

16
19
22
27

10
10
10
10

7.25
7.25
7.25
7.50

40 06 12 12
40 06 13 13
40 06 14 14

12
13
14

116
131
131

24.2
28.3
28.3

3
3
3

27
37
36

10
10
10

8.10
8.55
9.50

175 x 350 x 45 mm, 8 pieces


'

Code

'

96 83 81 92

1300

'

No 20

'

116.65

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

'

A
"

L
mm

b
mm

a
mm

R
g

40 46 10 10
40 46 12 12
40 46 13 13
40 46 14 14

5/32
3/16
13/64
7/32

70
70
78
78

10.5
10.5
12.6
12.6

2
2
2
2

5
5
7
6

10
10
10
10

7.75
7.75
7.75
7.75

40 46 15 15
40 46 16 16
40 46 18 18
40 46 20 20

15/64
1/4
9/32
5/16

78
91
91
96

12.6
14.7
14.7
16.8

2
2
2
3

6
9
9
16

10
10
10
10

7.75
7.75
7.75
7.75

40 46 22 22
40 46 24 24
40 46 28 28
40 46 32 32

11/32
3/8
7/16
1/2

103
105
116
131

18.9
21
24.2
28.3

3
3
3
3

19
22
28
37

10
10
10
10

7.90
7.90
7.95
9.50

40 46 34 34

9/16

131

28.3

36

10

10.50

175 x 350 x 45 mm, 8 pieces

'

Code

96 83 03 56

1323

'

121.55

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22 mm

'

'

'

'

Small double open ended


spanners ELECTRIC

Code

TCS 20/8, 6x719x22 mm MF

No 20

12a

'

Sets: Small double open ended spanners ELECTRIC


TCS 20/10, 6x730x32 mm

350 x 350 x 45 mm, 10 pieces

'

'

Code

'

96 83 01 66

2450

'

No 20

'

84

Code
'

173.15

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm

No

Content
mm/"

R
g

96 40 06 53 12/10Pc 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11


161
96 40 06 51 12/15Pc 3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 296
96 40 46 54 12a/13Pc 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32;
3/8; 7/16; 1/2; 9/16
270
'

Pc: in plastic-wallet
'

79.65
123.90
115.95

130a

Combination spanners

16/5Pc

Set: Combination spanners OPEN-BOX;


3.25 mm

P Q
Fed. Spec. GGG-W-636 E, HPQ high performance steel, chrome plated.

'

Code

Content
mm

96 40 09 02

3.2; 3.5; 4; 4.5; 5

46

'
'

L
mm

b
mm

40 57 16 16
40 57 18 18
40 57 20 20
40 57 22 22

1/4
9/32
5/16
11/32

105
110
115
120

40 57 24 24
40 57 28 28
40 57 32 32
40 57 34 34

3/8
7/16
1/2

125
135
150
165

Code
'

"

9/16

'

130aSP

d
mm

a1
mm

a2
mm

R
g

14.2
9.8
15.5 10.9
17
12
19
13.1

3.6
4.1
4.5
4.9

6
6
7
7

13
16
20
25

10
10
10
10

19.70
19.80
20.30
21.30

20.5
23
27
30.5

5.2
6
6.5
7

7
8
8.5
8.5

32
42
61
78

10
10
10
10

24.50
25.40
26.50
30.20

14.1
16.2
18.2
20.6

'

45.05

Pc: in green plastic-wallet


'

180a

Double ended ring spanners

P Q
short, shallow offset, Fed. Spec. GGG-W-636 E,
S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2",
HPQ high performance steel, chrome plated.

Spline drive combination spanners

Q
MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

'

L
d1 d2 a1
a2
t1
t2 R
mm mm mm mm mm mm mm g S

Code

"

'

1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
9/16 x 5/8

41 60 16 20
41 60 24 28
41 60 32 34
41 60 34 36
'

107
122
141
148

10.2
14.6
18.5
20.7

11.8
16.7
20.7
22.6

7
6.7
8.7
9.5

8
7.2 7.4
7.8 9 10
9.5 11 12
10.5 11.5 12.5

26
42
62
87

10
10
10
10

27.00
29.40
32.30
34.50

'

Code
'

Spline
size

A L
"

mm

b
mm

d
mm

230a

a1
a2 R
mm mm g S

40 58 16 16
40 58 20 20
40 58 24 24
40 58 28 28

8
10
12
14

1/4
5/16
3/8
7/16

105
115
125
135

14.2
17
20.5
23

10
12.2
14.8
16.5

3.6
4.5
5.2
6

5.6
6.4
7
8

13
21
31
43

5
5
5
5

19.80
20.40
24.60
25.50

40 58 32 32
40 58 34 34

16
18

1/2
9/16

150
165

27
18.7
30.5 20.8

6.5
7

8.5 59
8.5 84

5
5

26.60
29.60

'

16

Double ended ring spanners

P Q
shallow offset, SAE AS 954 (dimensions and test loads);
Fed. Spec. GGG-W-636E, S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2",
HPQ high performance steel, chrome plated.

Combination spanners OPEN-BOX

ISO 3318, Chrome Alloy Steel, chrome plated.

'

Code
'

Code

mm

L
mm

b
mm

d
mm

a1
mm

a2
mm

R
g

40 09 32 32
40 09 35 35
40 09 40 40
40 09 45 45

3.2
3.5
4
4.5

75
75
85
85

10
10
12.5
12.5

6.6
6.6
7.8
7.8

3
3
3
3

3.2
3.2
3.2
3.2

6
6
9
8

10
10
10
10

8.80
8.80
8.85
8.85

40 09 50 50

95

14

9.8

3.2

11

10

8.85

'

'

"

L
d1 d2 a1
a2
t1
t2 R
mm mm mm mm mm mm mm g S

41 61 16 20
41 61 20 22
41 61 20 24
41 61 24 28

1/4 x 5/16
5/16 x 11/32
5/16 x 3/8
3/8 x 7/16

180
195
195
215

10.2
11.9
11.9
14.6

11.9
13.5
14.6
16.7

41 61 28 32
41 61 32 34
41 61 34 36
41 61 36 40

7/16 x 1/2
1/2 x 9/16
9/16 x 5/8
5/8 x 3/4

225
235
245
274

16.7
19.5
20.7
22.6

19.5 8.7 9.1 11.9


20.7 9.1 9.5 12.2
22.6 9.5 11.5 13.8
27.5 11.1 12 14.8

41 61 38 40
41 61 42 44
41 61 46 48
41 61 48 50

11/16 x 3/4
13/16 x 7/8
15/16 x 1
1 x 1 1/16

275
301
340
368

25.4
29.5
34.1
36.5

27.5
31.7
36.5
38.6

41 61 52 56

1 1/8 x 1 1/4

403 40.8 45

'

'

5.2
7
6
7.9

6
7.9 8.8
8
8
9
7.9 10.8 12.4
8.7 11.4 11.7

36
45
54
74

10
10
10
10

22.50
25.30
23.90
24.30

12.6
12.9
13.9
15.8

105
119
122
156

10
10
10
10

25.80
28.10
32.60
33.70

11.1
13.5
14.5
15

12
14.5
15
16

15.2
19
22
23

15.8
20
23
24

158 10
175 5
375 5
460 5

38.40
43.10
48.60
53.50

16

18

25

27

620

57.00

85

Spanners
23

Double ended ring spanners

21

Double ended ring spanners

shallow offset, DIN 897/ISO 10104 (metric sizes),


Chrome Alloy Steel, chrome plated.

straight, DIN 837/ISO 10103, Chrome Alloy Steel, chrome plated.

StahlwilleSTABIL

'

mm

L
mm

d1 d2 a1
a2
t1
t2 R
mm mm mm mm mm mm g S

41 07 06 07
41 07 08 09
41 07 10 11
41 07 12 13

6x7
8x9
10 x 11
12 x 13

170
179
188
203

9.5
12.1
14.6
17.3

10.8
6
7 7
13.3
7
8 8
15.9 8.5 9.5 9
18.6 9.5 10.5 10

8
9
10
11

41
49
66
95

10
10
10
10

10.30
9.85
10.50
11.30

41 07 14 15
41 07 16 17
41 07 17 19
41 07 18 19

14 x 15
16 x 17
17 x 19
18 x 19

219
248
250
251

20.1
22.7
24.1
25.5

21.4
24.1
27
27

11
14
15
16

13
15
18
18

109
144
162
157

10
10
10
10

13.00
13.60
14.40
15.40

41 07 20 22
41 07 21 23
41 07 24 27
41 07 30 32

20 x 22
21 x 23
24 x 27
30 x 32

280
328
376
429

28.5
29.8
34.3
42.6

31.3 13.5 14.5 19


32.9 13.5 14.5 19
38.6 14.5 16 22
45.2 18 18 26

20
22
24
27

223
281
426
608

5
5
5
5

18.50
22.60
23.80
29.90

Code
'

'

10.5
11.5
12.5
12.5

11.5
12.5
13.5
13.5

'

mm

L
mm

d1
mm

d2
mm

a
mm

R
g

41 05 06 07
41 05 08 09
41 05 08 10
41 05 10 11

6x7
8x9
8 x 10
10 x 11

100
115
115
130

9.6
12.5
12.5
15.4

11
14
15.4
16.6

4.5
5.5
6
6

14
19
18
28

10
10
10
10

8.85
8.85
8.70
9.10

41 05 12 13
41 05 13 17
41 05 14 15
41 05 16 17

12 x 13
13 x 17
14 x 15
16 x 17

150
170
165
170

18.2
19.5
21
23.8

19.5
25
22.5
25

6.5
8
7.5
8

42
57
55
68

10
10
10
10

10.50
11.80
11.30
11.70

41 05 16 18
41 05 17 19
41 05 18 19
41 05 18 21

16 x 18*
17 x 19
18 x 19
18 x 21

185
185
185
210

23.8
25
26.3
26.3

26.3
27.6
27.6
30.5

8
8
9
9

74
78
84
107

10
10
10
5

13.20
11.90
12.10
17.60

41 05 19 22
41 05 20 22
41 05 21 24
41 05 24 27

19 x 22
20 x 22
21 x 24
24 x 27

210
210
235
290

27.6
29
30.5
34.7

32.4
32.4
34.7
38.5

9
9
10
11

109
109
128
225

5
5
5
5

16.40
15.00
19.70
18.70

41 05 27 32
41 05 30 32
41 05 30 34

27 x 32
30 x 32
30 x 34

320
325
325

38.5
43
43

45.5
45.5
48.5

12
12
12

283
289
307

5
5
5

27.10
25.80
29.60

Code
'

23/8

Set: Double ended ring spanners;


6x720x22 mm

shallow offset.

'

* to be discontinued
'

Sets: Double ended ring spanners

'

Code
'

96 41 07 04
'

Content
mm
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22

Standard packing: carton.


(Coloured plastic-wallets: page 78)
'

R
g

870

102.45

'

Code

No

96 41 05 03

21/7

'

96 41 05 01
'

Content
mm

8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;


18 x 19; 20 x 22
21/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22; 24 x 27; 30 x 32

Standard packing: carton


(Coloured plastic-wallets: page 78)
'

86

R
g

397

78.55

943

131.90

220

Double ended ring spanners

20TX*

Double ended ring spanners

for external TORX screws, offset, Chrome Alloy Steel, chrome plated.

P Q
extra long, 15 angled, SAE AS 954-E (test loads) (American sizes),
HPQ high performance steel, chrome plated.

'
'

Code
'

L
mm

mm

d1
d2
mm mm

a1
mm

R
g

Code

'

41 03 55 07 5.5 x 7 185
41 03 06 08
6 x 8 205
41 03 09 11
9 x 11 250
41 03 10 11 10 x 11 250

8.8
9.8
14.2
15.5

11
12.1
16.7
16.7

5.8
6
8.7
8.7

28
34
80
80

5
5
5
5

26.90
30.70
29.70
29.70

41 03 12 14
41 03 13 14
41 03 17 19
41 03 18 19

18.3
18.7
25
25.5

20.7
9.5
9.5
20.7
9.5
9.5
27.5 11
12
27.5 11
12

162
160
296
295

5
5
5
5

32.10
36.10
40.30
47.30

41 03 19 22
41 03 20 22
'

12 x 14
13 x 14
17 x 19
18 x 19

290
290
365
365

19 x 22 408
20 x 22 409

220a

5.3
5.6
8
8

a2
mm

27.5 31.5 13
28.5 31.5 13

14.3
14.3

520
515

5
5

53.00
57.50

41 24 11 12
41 24 14 16
41 24 18 20
41 24 22 24

size
E11 x
E14 x
E18 x
E22 x

E12
E16
E20
E24

'

L
d1 d2 a1
a2
t
mm mm mm mm mm mm

196
218
254
298

90
132
183
293

14.6
17.4
22.6
25.3

15.9 9
18.8 9
24.1 11
29.5 12

9
10
12
13

23
25
27
31

S
1
1
1
1

15.50
20.80
20.80
23.70

* to be discontinued
'

21TX

Double ended ring spanners

for external TORX screws, straight, Chrome Alloy Steel, chrome plated.

Double ended ring spanners

'

Code
'

L
mm

A
"

d1
d2
mm mm

41 43 14 16
41 43 16 20
41 43 24 28
41 43 32 34

7/32 x 1/4
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16

184 9
9.9
205 9.9 12.2
250 14
16
290 18.5 21

41 43 36 40
41 43 38 40

5/8 x 3/4
11/16 x 3/4

363 22.6 27
365 25
27

'

220aSP

a1
mm

a2
mm

R
g

5.3
5.6
8
9.5

5.8
6
8.7
9.5

29
33
79
160

5
5
5
5

26.80
27.90
30.60
36.10

298
291

5
5

42.80
47.30

11
11

12
12

Double ended ring spanners

'

Code
'

41 25 06 08
41 25 10 12
41 25 14 18
41 25 20 24

size

L
mm

d1
mm

d2
mm

a1
mm

a2
mm

E6 x E8
E10 x E12
E14 x E18
E20 x E24

115.5
149.5
185
227

9.6
13.7
17.8
24.7

11.6
15.7
22.5
29.2

4.5
6.5
8
10.5

5.5
7.5
9.5
12.5

17
33
71
129

'

S
10
10
10
10

11.60
13.10
15.80
21.40

H Double ended open ring spanners,

24

extra long, with spline-drive profile, 15 angled, MS-33787, MIL-W-8982,


HPQ high performance steel, chrome plated.

angled

P
DIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel, chrome plated.

'

Code

Spline
size

L
mm

41 16 07 09
41 16 08 10
41 16 12 14
41 16 16 18

7x9
8 x 10
12 x 14
16 x 18

7/32 x 9/32
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16

185 9.4 11.5


205 10.4 12.4
250 14.9 17
290 19 21

41 16 18 20
41 16 22 24
41 16 26 30
41 16 28 32

18 x 20
22 x 24
26 x 30
28 x 32

9/16 x 5/8
11/16 x 3/4
13/16 x 15/16
7/8 x 1

315
365
410
430

'

'

"

d1 d2 a1
mm mm mm

21
25
29.5
32

23
27.5
34
36.5

a2
mm

R
g

5.3
5.6
8
9.5

5.8
6
8.7
9.5

23
33
79
161

5
5
5
5

24.90
27.10
29.80
35.40

10
11
13
13.5

11
12
14.3
15

205
310
496
582

5
5
5
5

40.20
46.20
51.50
56.00

'

L
d1 d2 a1
a2 m1 m2 R
mm mm mm mm mm mm mm g S

41 08 08 10
41 08 09 11
41 08 10 11
41 08 10 12

8 x 10
9 x 11
10 x 11
10 x 12

145
155
155
160

41 08 11 13
41 08 12 14

11 x 13
12 x 14

170 21.5 24
180 24 26

Code
'

'

mm

17.5
18.5
19.5
19.5

19.5
21.5
21.5
22.5

7
8.5
8.5
8.5

8.5
9
9
9.5

9 10
9.5 10.5

6.3
6.7
7.1
7.1

7.1
8.6
8.6
9

8.6 10
9 11

39
54
55
59

10
10
10
10

15.30
17.00
15.00
15.60

80
89

10
10

15.20
16.70

87

Spanners
H Double ended open ring spanners,

24a

angled

'

Code
'

41 48 16 20
41 48 20 24
41 48 24 28
41 48 32 34

L
d1 d2 a1
a2 m1 m2 R
mm mm mm mm mm mm mm g S

A
"

1/4 x 5/16
5/16 x 3/8
3/8 x 7/16
1/2 x 9/16

105
145
155
180

'

16.5
17.5
19.5
24

18
19.5
21.5
26

5.5 7
7
8.5
8.5 9
9.5 10.5

3.7 5
6.3 7.1
7.1 8.6
9.5 11

32
39
57
87

10
10
10
10

240

Ratchet wrenches FastRatch

patent, specially suitable for union nuts. Using a single wrench,


it is possible to tighten/loosen both metric and imperial nuts and bolts.
Made of hardened and tempered stainless steel.
21.20
21.20
21.50
23.30

I Double ended open ring spanners,

24

angled

P
2

DIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel, chrome plated.
'

Code

mm/"

L
d1 d2 a1
a2 m1 m2 R
mm mm mm mm mm mm mm g S

41 08 14 17
41 08 16 19
41 08 17 19
41 08 18 21

14 x 17
16 x 19*
17 x 19
18 x 21*

200
220
220
230

26
29
30
31.5

30
33
33
35.5

10.5
12
12
13

12
13
13
13.5

11
13
14
14.8

14
15.8
15.8
16.2

115
155
151
182

10
5
10
5

17.50
24.70
19.10
27.80

41 08 19 22
41 08 22 24
41 08 24 27
41 08 27 36

19 x 22
22 x 24
24 x 27
27 x 36

230
245
270
300

33
37
40.5
42

37
40.5
44.5
54

13
15
16
16

15
16
17.5
19

15.8
17
18
20

17
18
20
27

192
251
310
414

5
5
5
5

23.10
25.80
32.30
39.90

41 08 30 32

30 x 32

300

48.5 50.5 20

22

22

24

455

42.40

Code
'

mm

'

b
mm

a
mm

R
g

5/16
3/8
7/16
15/32

121.4
133.3
140.4
146.3

16
20
23
25

4
4
5
5

60
70
103
100

1
1
1
1

31.60
31.80
33.00
34.90

41 10 13 13
41 10 14 14
41 10 16 16
41 10 17 17

13
14
16
17

1/2
9/16
5/8
21/32

168.4
174.6
191.3
201.7

26.8
29.6
32.8
34.3

6
6
7
7

154
180
270
310

1
1
1
1

35.40
36.10
39.40
41.20

41 10 18 18 18
41 10 19 19 19

11/16
3/4

212.8
238.5

36.2
38.5

7
7

310
380

1
1

43.80
45.10

'

L
mm

41 10 08 08 8
41 10 10 10 10
41 10 11 11 11
41 10 12 12 12

'

'

Sets: Ratchet wrenches FastRatch

* to be discontinued
'

I Double ended open ring spanners,

24a

angled

'

Code
'

41 48 36 40
41 48 40 48

A
"

5/8 x 3/4
3/4 x 1

'

L
d1 d2 a1
a2 m1 m2 R
mm mm mm mm mm mm mm g S
218
232

29
33

33 12
40.2 13

13
16

12.7 15.8 148


15.8 19 199

5
5

26.60
32.40
'

ES 24/7, 8x1019x22 mm

Code

No

96 41 10 01

240/5

96 41 10 02

240/6

'

'

Content
mm/"

R
g

10 mm - 3/8"; 11 mm - 7/16"; 14 mm - 9/16";


17 mm - 21/32"; 19 mm - 3/4"
8 mm - 5/16"; 10 mm - 3/8"; 13 mm - 1/2";
14 mm - 9/16"; 17 mm - 21/32"; 19 mm - 3/4"

1022

187.20

1094

221.20

TCS 240/6

175 x 350 x 30 mm, 7 pieces


'

'

96 83 81 71

835

'

No 24
'

83 81 20 86
'

Code

Empty tray

130.75

sizes 8 x 10; 10 x 11; 11 x 13; 12 x 14;


14 x 17; 17 x 19; 19 x 22 mm
103

8.85

175 x 350 x 35 mm, 6 pieces


'

Code

'

96 83 87 74

1163

'

No 240
'

88

sizes 10; 11; 13; 14; 17; 19 mm

247.20

17

Combination ratcheting spanners


OPEN-RATCH

25

Ratchet ring spanners

with bi-hexagon, straight, 22 teeth, chrome plated.

reversible, bi-hexagon, 72 teeth, for work in confined spaces,


tight ratchet angle of only 5, ring end offset by 15, Chrome Alloy Steel,
chrome plated.

'

'

Code

mm

L
mm

b
mm

d
mm

a1
mm

a2
mm

R
g

41 17 08 08
41 17 09 09
41 17 10 10
41 17 11 11

8
9
10
11

144
150
158
165

17.0
18.8
21.7
23.0

18.0
19.5
21.0
22.0

4.7
5.3
5.7
6.1

7.4
7.4
8.4
8.4

43
49
67
73

5
5
5
5

15.20
16.00
16.45
17.85

41 17 12 12
41 17 13 13
41 17 14 14
41 17 15 15

12
13
14
15

173
182
190
202

25.2
26.5
29.5
31.3

23.5
25.0
26.5
28.0

6.4
6.6
7.3
7.5

8.4
8.4
8.4
8.4

87
99
113
131

5
5
5
5

18.35
18.50
19.90
21.20

'

41 17 16 16
41 17 17 17
41 17 18 18
41 17 19 19

16
17
18
19

'

215
229
240
252

33.4
36.3
38.0
39.0

29.0
30.5
32.0
34.0

7.7
7.9
8.4
8.7

10.0
10.0
11.5
11.5

Code

mm

L
mm

d1
mm

d2
mm

a
mm

R
g

41 13 07 08
41 13 09 10
41 13 10 11
41 13 12 13

7x8
9 x 10
10 x 11
12 x 13

109
139
170
170

15
20
26
26

17
23
30
30

9
9
12
12

55
80
144
135

1
1
1
1

14.90
18.20
23.40
22.70

41 13 14 15
41 13 16 18
41 13 17 19

14 x 15
16 x 18
17 x 19

170
205
205

26
33
33

30
36
36

12
12
12

126
196
188

1
1
1

23.40
25.60
28.50

'

154
180
209
232

5
5
5
5

22.35
22.95
25.25
26.05

'

25aN

Ratchet ring spanners

as No 25, but made of solid steel, Fed. Spec. GGG-W-001405.

available from June 2014


'

Sets: Combination ratcheting spanners OPEN-RATCH,


in roll-up wallet

U
'

Code

d1
mm

d2
a
mm mm

R
g

1/4 x 5/16
5/16 x 11/32
3/8 x 7/16
1/2 x 9/16

109
109
139
174

15
15
20
26

17
17
23
30

9
9
9
12

65
60
90
164

1
1
1
1

14.80
27.40
17.10
20.80

41 56 36 38
41 56 40 44
41 56 42 46

5/8 x 11/16
3/4 x 7/8
13/16 x 15/16

205
235
235

33
36
36

36
40
40

12
13
12

257
296
281

1
1
1

25.00
26.60
28.20

"

L
mm

41 56 16 20
41 56 20 22
41 56 24 28
41 56 32 34

'

'

Sets: Ratchet ring spanners

Roll-up wallet made of extremely thought textile with Velcro fastener


'

Code

No

Content
mm

96 41 17 05
96 41 17 12

17/5
17/12

8; 10; 13; 17; 19


8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19

721
1637

'

'

98.85
234.85

available from June 2014


'

TCS 17/12

'

175 x 350 x 45 mm, 12 pieces

R
g

'

96 83 06 49

1550

'

No 17
'

available from June 2014


'

No

96 41 13 02
96 41 13 01

25/4
25/7Pc

96 41 56 02
96 41 56 01

25a/4N
25a/7PcN

'

'

Code

Code

262.25

sizes 8; 9; 10; 11; 12; 13; 14; 15; 16;


17; 18; 19 mm

'

Content
mm/"

R
g

9 x 10; 12 x 13; 14 x 15; 17 x 19


556
7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15;
16 x 18; 17 x 19
1049
3/8 x 7/16; 1/2 x 9/16; 5/8 x 11/16; 3/4 x 7/8
1000
1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 1/2 x 9/16;
5/8 x 11/16; 3/4 x 7/8; 13/16 x 15/16
1271

92.80
171.90
89.50
175.10

Standard packing: clear view wallet.


Pc: in green plastic-wallet.
'

89

Spanners
ES 25/7, 7x817x19 mm

26a

Ratchet ring spanners

P
reversible, with bi-hexagon, angled, 22 teeth, chrome plated.

175 x 350 x 30 mm, 7 pieces


'

Code

'

96 83 81 08

1040

'

No 25

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;


14 x 15; 16 x 18; 17 x 19 mm

'

83 81 20 38
'

165.35

Empty tray

111

'

8.65
Code
'

41 55 16 20
41 55 24 28
41 55 32 34

TCS 25/7

L
mm

d1
mm

d2
mm

a
mm

R
g

1/4 x 5/16
3/8 x 7/16
1/2 x 9/16

109
139
170

15
20
26

17
23
30

9
9
12

55
80
126

1
1
1

"

'

27

17.50
20.20
23.30

Double ended ring spanners


STARTER

175 x 350 x 30 mm, 7 pieces


'

ISO 3318, Chrome Alloy Steel, chrome plated.

Code

'

96 83 87 51

984

'

No 25

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;


14 x 15; 16 x 18; 17 x 19 mm

'

25aSP

177.00

Spline drive ratchet ring spanners

straight, 22 teeth, chrome plated.

'

L
d1 d2
a
r1
r2
mm mm mm mm mm mm

41 09 10 12
41 09 11 13
41 09 14 16
41 09 14 17

10 x 12
11 x 13
14 x 16
14 x 17

150
150
179
179

19.5
19.5
24.5
24.5

6.5
6.5
7.5
7.5

35
35
36
36

60
60
64
64

53
50
91
89

10
10
10
10

20.20
19.00
24.60
23.50

41 09 15 17
41 09 16 18
41 09 19 22

15 x 17
16 x 18
19 x 22

184 22.5 25
200 25.3 27.5
225 28 32

7.5
8.5
9

38
47
48

66
68
67

96
130
164

10
5
5

24.00
29.10
30.50

'

Code
'

Spline
size

"

L
d1
d2
a
mm mm mm mm

R
g

Code
'

41 57 08 10 8 x 10
41 57 12 14 12 x 14
41 57 16 18 16 x 18
41 57 20 22 20 x 22

1/4
3/8
1/2
5/8

x 5/16
x 7/16
x 9/16
x 11/16

109
139
174
205

15
20
26
33

17
23
30
36

9
9
12
12

59
84
153
250

1
1
1
1

16.50
20.80
26.30
31.00

41 57 24 28 24 x 28

3/4

x 7/8

235

36

40

13

279

32.30

'

mm

'

25B

Ratcheting bit holder

c Double ended flexi-joint spanner

29

for hexagon bits, magnetic location, reversible heads angled,


chrome plated.

16.5
16.5
21
21

FLEXI

P
Chrome Alloy Steel, chrome plated.

'

Code
'

41 54 16 20
'

inside
b"
1/4 x 5/16

L
d1
d2
a1
a2
mm mm mm mm mm
138

20

23

15

17

R
g

105

'

S
1

25.80

Code

mm

L
d1
d2
a1
a2
mm mm mm mm mm

R
g

43 01 06 07

6x7

180 9.5

51

10

'

'

90

11

23

23

28.60

f Double ended flexi-joint spanners FLEXI

29

TCS 29/7, 8x920x22 mm

Chrome Alloy Steel, chrome plated.

175 x 350 x 40 mm, 7 pieces


'

Code

'

96 83 01 95

1520

'

No 29

'

L
mm

d1
mm

d2
mm

43 01 08 09 8 x 9
43 01 10 11 10 x 11
43 01 10 13 10 x 13
43 01 12 13 12 x 13

201
202
230.5
228

11.9
14.7
14.7
17.2

13.4
15.9
18.4
18.4

26
30.5
30
33

27.5
32
33.5
33.5

81
102
137
153

10
10
10
10

30.30
30.30
37.70
33.00

43 01 14 15
43 01 16 17
43 01 16 18
43 01 17 19

14 x 15
16 x 17
16 x 18
17 x 19

227
247
249
250

19.7
22.2
22.2
23.7

20.9
23.7
24.7
26.3

35
38.5
38.5
39

37
39
40
41

197
234
267
277

10
10
10
5

34.90
39.10
45.70
40.90

43 01 18 19
43 01 20 22
43 01 21 23
43 01 24 27

18 x 19
20 x 22
21 x 23
24 x 27

246.5
287.5
286.5
349.5

24.7
27.3
28.6
32.4

26.3
29.8
31.1
36.1

40
45.5
46.5
50.5

41
48
50
60.5

294
430
447
716

5
5
5
5

44.00
50.50
55.00
71.50

Code
'

mm

'

a1
a2
mm mm

f Double ended flexi-joint spanners FLEXI

29a
'

Code
'

43 41 24 28
43 41 32 34
43 41 36 38

L
mm

d1
mm

d2
mm

a1
a2 R
mm mm g

202 14
227 18.1
249.5 22.1

16
20
24

30.5 32
35
37
39
40

A
"

3/8 x 7/16
1/2 x 9/16
5/8 x 11/16

'

29/7

without tubular handle, Chrome Alloy Steel, chrome plated.

a
b

5 31.70
5 36.60
5 42.60

Set: Double ended flexi-joint spanners


FLEXI; 8x920x22 mm

mm

L1
mm

L2
mm

b
mm

a
mm

h
mm

42 02 00 24
42 02 00 27
42 02 00 30
42 02 00 32

24
27
30
32

180
190
200
235

555
560
565
730

38
41
47
49

17
17
18
18

29.5
31.5
33.5
34

381 5 1/2 -1
421
1
525
1
712
2

1
1
1
1

32.40
33.90
36.50
43.10

42 02 00 36
42 02 00 38
42 02 00 41
42 02 00 42

36
38
41
42

245
250
265
265

735
740
750
750

54
56
62
62

20
21
22
22

35.5
37.5
39.5
39.5

816
810
910
919

2
2
2
2

1
1
1
1

45.00
63.50
53.50
61.50

42 02 00 46
42 02 00 50
42 02 00 55
42 02 00 60

46
50
55
60

280 910
290 920
300 925
345 1050

69
76
81
90

23
25.5
28
30.5

40
42.5
45.5
49

1192
1426
1541
2260

3
3
3
4

1 60.50
1 72.00
1 78.50
1 101.00

42 02 00 65
42 02 00 70
42 02 00 75
42 02 00 80

65
70
75
80

355
365
375
385

1060
1065
1070
1075

98
105
110
125

33
35.5
38
40.5

53
55
57.6
59

2603
2882
3058
3889

4
4
4
4

1
1
1
1

110.00
123.00
143.00
165.00

42 02 00 85 85
42 02 00 90 90
42 02 00 95 95
42 02 01 00 100

385
410
410
412

1075
1100
1100
1100

125
140
140
143

40.5
45
45
45

59
63
63
63

3648
5238
4630
4895

4
4
4
4

1
1
1
1

170.00
315.00
338.00
373.00

Code
'

96 43 01 01
'

Content
mm

'

g handle S

No 5a available on request
L2 = length with handle No 5 1/2

8 x 9; 10 x 11; 12 x 13; 14 x 15;


16 x 17; 18 x 19; 20 x 22

L2

'

L1

'

Code

Heavy duty ring spanners

'

98
195
269

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15;


16 x 17; 18 x 19; 20 x 22 mm

'

286.00

'

1503

262.10

5 1/2

Standard packing: carton.

Tubular handles

'

for heavy duty ring spanners No 5.

ES 29/6, 8x918x19 mm

'

Code
'

48 03 00 01
48 03 00 02
48 03 00 03
48 03 00 04

175 x 350 x 30 mm, 6 pieces


'

Code
96 83 81 09

1185

'

No 29
'

'

1
2
3
4

460
610
760
860

19
22
25
30

2430
3242
4655
60100

11 3/16
1 1/41 11/16
1 3/42 1/4
2 3/83 7/8

mm

"

R
g

605
1562
2820
3705

S
1
1
1
1

28.70
33.40
57.00
75.00

'

83 81 20 41

'

L
d
size mm mm

Empty tray

220.25

sizes 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19 mm
105

8.65
91

Spanners
8

Striking face ring spanners

4205

StahlwilleSTABIL

Striking face ring spanners

DIN 7444, special steel, grey.

Chrome Alloy Steel, green painted.

'

mm

L
mm

a
mm

42 05 00 24
42 05 00 26
42 05 00 27
42 05 00 28

24
26
27
28

160
160
180
180

42.5
42.5
46
47

15
15
16
15.5

240
220
274
320

1
1
1
1

23.90
29.20
29.20
29.20

42 05 00 30
42 05 00 32
42 05 00 33
42 05 00 36

30
32
33
36

190
195
195
205

51.5
53
53
60

16.5
16.5
16.5
19.5

365
353
362
505

1
1
1
1

34.70
35.70
35.70
45.70

42 05 00 37
42 05 00 38
42 05 00 41
42 05 00 42

37
38
41
42

205
205
225
225

60
60
66
66

19.5
19.5
20.5
20.5

500
522
715
700

1
1
1
1

45.70
45.70
60.00
67.00

42 05 00 46
42 05 00 47
42 05 00 48
42 05 00 50

46
47
48
50

240
240
240
250

75
75
75
80

22.5
22.5
22.5
23.5

915
950
950
1120

1
1
1
1

63.50
63.50
63.50
73.00

42 05 00 52
42 05 00 55
42 05 00 56
42 05 00 60

52
55
56
60

250
270
270
270

80
87.5
87.5
93.5

23.5
25
25
26

1100
1375
1400
1565

1
1
1
1

73.00
83.00
92.00
89.00

42 05 00 64
42 05 00 65
42 05 00 70
42 05 00 75

64
65
70
75

290
290
320
325

101
101
109.5
114.5

29
29
33
34

2150
2045
3000
2750

1
1
1
1

115.00
115.00
129.00
137.00

42 05 00 80
42 05 00 85
42 05 00 90
42 05 00 95

80
85
90
95

345
360
400
400

126
129
152
152

35
37
41.5
41.5

4100
3835
5430
4900

1
1
1
1

204.00
246.00
296.00
333.00

42 05 01 00
42 05 01 05
42 05 01 10
42 05 01 15

100
105
110
115

400
435
435
435

152
172
172
172

41.5
47.5
47.5
47.5

6560
6300
7960
8160

1
1
1
1

376.00
431.00
495.00
540.00

42 05 01 20
42 05 01 30
42 05 01 35
42 05 01 45

120
130
135
145

480
520
520
580

182
202
202
228

54
58
58
64

9855
12295
11790
18550

1
1
1
1

859.00
1211.00
1262.00
1924.00

42 05 01 60
42 05 01 65
42 05 01 70
42 05 01 75

160
165
170
175

580
650
650
650

228
265
265
265

64
70
70
70

17890
26660
26310
25920

1
1
1
1

2266.00
2421.00
2957.00
3215.00

42 05 01 80
42 05 02 10

180
210

650
750

265
320

70
80

24600
39500

1
1

3518.00
4258.00

Code
'

1
'

Code

mm

L
mm

a
mm

42 01 00 32
42 01 00 36
42 01 00 41
42 01 00 46

32
36
41
46

195
195
200
250

47
52.4
59
65

24
26
29
32

661
684
896
1218

1
1
1
1

84.50
89.00
109.00
113.00

42 01 00 50
42 01 00 55
42 01 00 60
42 01 00 65

50
55
60
65

280
300
300
325

70
76
82.5
90.5

35
38
42
45

1555
2087
2394
3209

1
1
1
1

130.00
145.00
163.00
197.00

42 01 00 70
42 01 00 75
42 01 00 80
42 01 00 85

70
75
80
85

355
360
440
440

97
103.5
110
117

48
51
57
57

3649
4428
5895
6033

1
1
1
1

224.00
244.00
302.00
333.00

42 01 00 90
42 01 00 95
42 01 01 00
42 01 01 05

90
95
100
105

445
450
455
460

124
131
137
146

60
67
72
73

6885
7875
10224
10202

1
1
1
1

406.00
455.00
544.00
571.00

42 01 01 10
42 01 01 15
42 01 01 20

110
115
120

500
505
510

156
162
174

82
82
82

14492
14376
15308

1
1
1

766.00
782.00
922.00

'

'

b
mm

Additional spanner opening to DIN 7444 on request.


'

61*

Striking sockets

They may be extended by adding any number of similar Sockets,


to reach deep seated bolts.
Equal inside and outside hexagons, Chrome Alloy Steel, chrome plated.

'

b
mm

'

Code
'

06 03 00 46
06 03 00 60
07 03 01 05

mm
46
60
105

'

* to be discontinued
'

L
mm
82
95
155

d
mm

65
82.5
146

1
1
1 1/2

"

R
g

873
1673
9500

4205a

S
1
1
1

Striking face ring spanners

'

155.00
198.00
1216.00

L
mm

b
mm

a
mm

R
g

42 45 00 56
42 45 00 58
42 45 00 64
42 45 00 66

1 1/4
1 5/16
1 1/2
1 5/8

190
190
205
230

52
52
58
66

17
17
18
20

350
350
500
700

1
1
1
1

41.60
41.60
53.00
70.00

42 45 00 67
42 45 00 69
42 45 00 70
42 45 00 72

1 11/16
1 13/16
1 7/8
2

230
240
240
255

66
74
74
80

20
22
22
24

700
975
975
1075

1
1
1
1

70.00
74.00
74.00
86.00

42 45 00 73
42 45 00 75
42 45 00 76
42 45 00 78

2 1/16
2 3/16
2 1/4
2 3/8

255
270
270
280

80
86
86
93

24
25
25
26

1075
1320
1340
1600

1
1
1
1

86.00
96.00
96.00
103.00

42 45 00 79
42 45 00 81
42 45 00 82
42 45 00 84

2 7/16
2 9/16
2 5/8
2 3/4

280
300
300
330

93
102
102
110

26
30
30
33

1600
2300
2300
2900

1
1
1
1

103.00
134.00
134.00
149.00

42 45 00 85
42 45 00 87

2 13/16
2 15/16

330
330

110
110

33
33

2900
2900

1
1

149.00
158.00

Code
'

'

"

Additional spanner opening on request.


'

92

4004

4025

Single-end spanners

Single-end spanners, adjustable

right-handed, DIN 3117/ISO 6787,


B shape, jaw offset 22,
Chrome Vanadium, chrome plated.

DIN 894, Special Tool Steel, grey finish.

'

Code
'

'

Code

mm

L
mm

b
mm

a
mm

R
g

40 04 02 40
40 04 02 70
40 04 03 00
40 04 03 20

24
27
30
32

215
238
261
273

50
56
62
66

8.9
9.8
10.8
11.8

147
193
268
315

1
1
1
1

6.90
7.80
9.05
10.30

40 04 03 60
40 04 04 10
40 04 04 60
40 04 05 00

36
41
46
50

300
335
369
412

74
83.5
93
102

12.8
12.8
14.8
17

421
555
770
1003

1
1
1
1

14.30
18.40
23.20
29.70

40 04 05 50
40 04 06 00
40 04 06 50
40 04 07 00

55
60
65
70

457
492
528
572

112
122
132
142

18
18
19
20

1267
1650
2012
2425

1
1
1
1

32.10
41.10
51.50
60.00

40 04 07 50
40 04 08 00
40 04 08 50
40 04 09 00

75
80
85
90

608
645
690
690

152
162
173
173

21
22
23
23

2758
2963
3717
3570

1
1
1
1

76.50
93.00
120.00
140.00

40 04 09 50
40 04 10 00
40 04 10 50
40 04 11 00

95
100
105
110

847
847
1000
1000

195
195
217
217

25
25
28
28

5943
5800
8400
8370

1
1
1
1

200.00
207.00
279.00
300.00

'

L
A
size max. mm mm

'

4026

Single-end spanners, adjustable

'

Code
'

L
A
size max. mm mm

40 04 13 50

135

1000

225

28

19390

530.00

40 26 00 12 12
40 26 00 15 15
40 26 00 18 18

'

DIN 133, Special Tool Steel,


grey finish.

b
mm

a
mm

R
g

9.5
12
13.5
16

50
138
247
397

5
5
5
5

19.20
20.80
24.60
30.50

699
1324
2076

5
1
1

41.40
66.50
105.00

13
20
24
29

114
159
206
257

33
48
60
71

34
43
53

309
384
460

83
103
120

19
25
30

TCS 4026/3

175 x 350 x 30 mm, 3 pieces

15

'

Code

'

'

Code

mm

L
mm

b
mm

a
mm

R
g

42 04 00 27
42 04 00 30
42 04 00 32
42 04 00 36

27
30
32
36

180
190
190
215

56
62
62
76

16
17
17
17.5

321
451
424
698

1
1
1
1

19.60
20.90
22.40
30.20

42 04 00 41
42 04 00 46
42 04 00 50
42 04 00 55

41
46
50
55

235
255
275
300

86
98
105
116

18.5
20
21
23

923
1245
1445
2057

1
1
1
1

37.00
50.50
56.50
67.50

42 04 00 60
42 04 00 65
42 04 00 70
42 04 00 75

60
65
70
75

320
342
375
375

128
138
154
154

24.5
27
30
30

2559
3285
4573
4163

1
1
1
1

72.50
96.50
119.00
131.00

42 04 00 80
42 04 00 85
42 04 00 90
42 04 00 95

80
85
90
95

408
408
445
445

174
174
194
194

34
34
38
38

6059
5871
7600
7600

1
1
1
1

167.00
178.00
216.00
234.00

42 04 01 00
42 04 01 05

100
105

485
485

215
215

44
44

11500
11200

1
1

376.00
433.00

'

45.10
71.50
112.00

19
25
30

left-handed, DIN 3117/ISO 6787,


A shape, jaw offset 15,
Chrome-Vanadium, gunmetal finish.

342.00
379.00
457.00
471.00

5
1
1

83
103
120

1
1
1
1

708
1287
2105

309
384
460

12000
17000
18500
19000

20.90
22.30
26.60
33.00

34
43
53

28
28
28
28

5
5
5
5

40 25 00 12 12
40 25 00 15 15
40 25 00 18 18

225
225
225
225

'

53
123
241
399

33
48
60
71

1000
1000
1000
1000

Striking face open ended spanners

9.5
12
13.5
16

114
159
206
257

115
120
125
130

4204

13
20
24
29

40 04 11 50
40 04 12 00
40 04 12 50
40 04 13 00
'

a
mm

40 25 00 04 4
40 25 00 06 6
40 25 00 08 8
40 25 00 10 10

40 26 00 04 4
40 26 00 06 6
40 26 00 08 8
40 26 00 10 10

b
mm

96 83 87 65

1400

'

No 4026
'

120.40

sizes 8; 10; 12

93

Spanners
4014

Combination spanners

ES 10750/10, 6x720x22 mm

U
Chrome-Vanadium, chrome plated.

175 x 350 x 30 mm, 10 pieces


'

Code

'

96 83 81 68

1132

'

97.80

'

Code

b
A L
mm mm mm

40 14 65 65
40 14 70 70
40 14 75 75
40 14 80 80

65
70
75
80

'

'

710
760
810
860

d
a1 a2
t
mm mm mm mm

133
98
143 105
153 110
163 119

22
24
26
28

33
35
38
41

49.5
53.5
57.5
63.5

R
g

4415
5625
6545
8790

1
1
1
1

No 10750

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22 mm

No 10750 1/2

sizes 6; 7

'

403.00
453.00
535.00
638.00

'

83 81 20 84
'

Empty tray

10751*
10750

Box spanners

DIN 896 Type B, made of seamlessly drawn precision steel tubing,


recessed at both ends, Chrome Alloy Steel, surface polished and chrome
plated.

103

8.85

Box spanners

double ended, forged Chrome Vanadium Steel, bored out, polished heads,
chrome plated.

'

mm

L
mm

d1
mm

d2
mm

R
g

43 32 06 07
43 32 08 09
43 32 10 11
43 32 12 13

6x7
8x9
10 x 11
12 x 13

110
110
120
140

7.52
12.2
14.2
17.2

10.5
13.2
15.2
18.2

26
30
48
68

10
10
10
10

4.80
5.65
6.10
6.75

43 32 14 15
43 32 16 17
43 32 17 19
43 32 18 19

14 x 15
16 x 17
17 x 19
18 x 19

140
150
160
160

19.2
22.2
24.2
25.2

20.2
23.2
26.2
26.2

78
123
147
148

10
10
10
10

7.20
8.75
10.40
10.70

43 32 20 22
43 32 21 23
43 32 24 26
43 32 24 27

20 x 22
21 x 23
24 x 26
24 x 27

170
170
190
190

27.2
28.2
32.2
32.2

29.3
30.2
34.2
35.2

200
191
293
289

5
5
5
5

11.00
11.10
14.00
14.00

43 32 30 32
43 32 32 36
43 32 36 41
43 32 41 46

30 x 32
32 x 36
36 x 41
41 x 46

200
220
220
240

39.2
42.2
47.2
53.2

42.3
46.2
52.5
59.2

382
535
662
750

5
2
2
2

18.60
25.30
31.00
37.30

43 32 46 50
43 32 55 60

46 x 50
55 x 60

240
240

58.5
70.2

63.5 959
76.2 1125

2
2

74.50
109.00

Code
'

'

L
mm

d1
mm

d2
mm

mm

R
g

43 20 06 07 6 x 7
43 20 08 09 8 x 9
43 20 16 17 16 x 17
43 20 18 19 18 x 19

110
120
160
170

9.5
11.8
21.8
24.4

10.5
13
23
26

8
9
16
18

39
55
193
225

10
10
10
10

16.30
16.30
28.30
32.30

43 20 20 22
43 20 21 23
43 20 24 27
43 20 30 32

180
185
190
200

27.3
28.5
32.2
39

30
31
36
41.5

20
21
24
30

328
340
436
619

5
5
5
5

34.80
38.40
47.90
82.50

* to be discontinued
'

10750 1/2

No

96 43 12 01 10750/7
96 43 12 04 10750/11
'

94

Content
mm

'

Code

size

48 01 00 06
48 01 00 07
48 01 00 08

6
7
8

'

L = Length

8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;


18 x 19; 20 x 22
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 21 x 23;
24 x 27; 30 x 32

R
g

725

56.15

1700

104.65

Tommy bars

for No 10750 and No 10751,


stepped.

'

'

20 x 22
21 x 23
24 x 27
30 x 32

'

'

Code

mm

'

Sets: Box spanners

'

Code

'

for No 10750
A mm

for No 10751
A mm

L
mm

R
g

6 x 7.14 x 15
16 x 17.24 x 27
30 x 32.55 x 60

6 x 7.16 x 17
18 x 19.30 x 32

180
320
630

57
338
1480

1
1
1

11.50
16.50
42.20

Sockets, Socket Sets

Sockets, Socket Sets

Provide guaranteed safety and efficiency.


STAHLWILLE sets of socket spanners
and inserts
The professionals in industry and the trades are under pressure to work quickly,
accurately and economically. Which is why they make heavy demands on their tools.
Due to the numerous technical innovations incorporated in them, STAHLWILLE ratchets and
sockets make a valuable contribution to the prevention of both mistakes and injuries.
By using ratchets, adaptors and inserts made by STAHLWILLE, professional tradesmen are
quite simply making sure. It does not matter whether it is a full set of tools or individual
components users can be sure they will get top-of-the-range quality every time.

This is guaranteed by adherence to the closest tolerances during production and


stringently applied quality assurance measures in accordance with DIN EN ISO 9001.
The legendary reliability and precision of these tools is enhanced by a large number of
user-friendly features.
1 Non-slip,

ergonomically manufactured 2-component handles facilitate strain-free working.

1 Slim-design
1 The

sockets enable access to awkward places.

QuickRelease system ensures full control over the joint between the ratchet,

the adaptors and the sockets.


1 Sculpted

chemical-resistant cut-outs in special PEfoam inlays prevent tools rattling

and sliding around.


Set No 45/14/5iQR
in sturdy plastic case

5
4

96

Ergonomically designed 2-component handle made

All metal parts are made of high-grade steel

Firm seating and yet easy release of sockets and

Wear parts can be easily replaced using sets of

Separate pawl to switch from clockwise to

of impact-resistant, skydrol resistant plastic.

(Chrome Alloy Steel, chrome plated).

adaptors.

spares for sockets.

anti-clockwise.

Safety advantage 1

Safety advantage 2

STAHLWILLE QuickRelease system

STAHLWILLE AS-Drive

The problem: imagine what happens if a tool falls into an

The problem: removing heavily corroded screws requires

inaccessible place during repair or overhaul work.

the application of considerable force. The socket slips off the


head of the screw.

The consequences: arduous, costly search and recovery,


possibly involving disassembly of an aeroengine or machine.

The consequences: uncontrolled movements cause injuries


and damage to both the workpiece and the tools.

The solution: the safety lock built into the QuickRelease system
prevents damage to workpieces and guarantees secure, rapid

The solution: STAHLWILLE sockets are equipped with the

connection of all individual components to form a single

AS-Drive* profile. This permits high transmission of forces to

combined unit. Nothing can get lost because it is not possible

the lands of nuts and bolts without damaging them. The risk

to inadvertently release a tool. To release a tool, it is first

of injury is minimised and the corners of the screw heads and

necessary to press the release button deliberately.

nuts are no longer damaged.

Even if you have oily or greasy hands, attaching and


separating the individual components is so simple it noticeably

*AS-Drive = Anti-Slip-Drive

smoothes your workflows.

Safety advantage 3
STAHLWILLE HPQ-inserts
The problem: although there is hardly enough room to move,
you still have to apply considerable torque to loosen
a stubborn screw.
The consequences: many of the sockets available are useless
simply because their wall thickness makes them impracticable
in awkward places.
The solution: STAHLWILLE HPQ*-sockets are manufactured
from selected tough steel alloys. These sockets will not slip off
the head of the screw, nor will they stretch when subjected to
heavy loads. Their extremely thin walls and unbelievably high
load capacity are simply exemplary. HPQ-sockets are free of
cadmium and are therefore suitable for use on titanium alloy
parts and titanium fasteners as used e.g. in the aerospace
industry, where safety is a crucial factor. They meet these
aerospace standards: E DIN EN 3709, E DIN EN 3710, SAE AS
954-E, S.B.A.C. AS 40605/40606, MS-33787, MIL-W-8982.
* = High Performance Quality

Some sets of STAHLWILLE socket spanners are supplied


in sturdy plastic cases.

97

Sockets, Socket Sets

6,3

DIN
3120

ISO

f Sockets

40D

1/4"

40aD/10CL

P Q
metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5M,
American sizes: ASME B 107.1, Fed. Spec. GGG-W-641,
SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

1174-1

Set:
Sockets with clip strip

P Q
Content: 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
1 clip strip No 40CL-2

'

Code
Code
'

mm

01 03 00 05
01 03 00 55
01 03 00 06
01 03 00 07

d1
d2
mm mm

5
7.9
5.5
8.5
6
9.2
7
10.7

'

'

10.7
10.7
10.7
10.7

d3
L
t1
t2 R
mm mm mm mm g S
4
4.5
5
6

01 03 00 08
01 03 00 09
01 03 00 10
01 03 00 11

8
9
10
11

11.6
12.8
14.3
15.5

01 03 00 12
01 03 00 13
01 03 00 14

12
13
14

16.5 16.5 11
17.8 17.8 12
18.8 18.8 13

'

96 01 53 10

11.6 7
12.8 8
14.3 9
15.5 10

206

'

53.65

23
23
23
23

4.5
6
6
6.5

15
9
15
9
15
9
13.4 10

10
10
10
10

4.30
4.35
4.35
4.25

P Q

23
23
23
23

8
8
8
9

13.1
12.8
14.9
14.6

11
13
17
19

10
10
10
10

4.25
4.50
4.35
4.55

metric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M,


E DIN EN 3709 (test loads), American sizes: ASME B 107.1,
Fed. Spec. GGG-W-641, SAE AS 954-E (test loads),
HPQ high performance steel, chrome plated.

23 9.5 14.3 23
23 9.5 14
25
24 10
14.7 32

10
10
10

5.15
5.15
5.30

e Sockets

40

f Sockets

40aD
'

Code

A
"

'

d1
d2
d3
mm mm mm

L
t1
t2 R
mm mm mm g S

6.7
7.6
8.6
9.4

10.7
10.7
10.7
10.7

3.2
4
5
5.5

23
23
23
23

3.5
4.5
6
6

15
15
15
15

10.7
11.6
12.7
13.7

6.6
7
8.1
8.3

23
23
23
23

6.5
8
8
8

13.2
13.1
13.3
13.3

01 53 00 10
01 53 00 12
01 53 00 14
01 53 00 16

5/32
3/16
7/32
1/4

01 53 00 18
01 53 00 20
01 53 00 22
01 53 00 24

9/32
5/16
11/32
3/8

10.7
11.6
12.7
13.7

01 53 00 28
01 53 00 32
01 53 00 34

7/16
1/2

15.8 15.8 10
17.3 17.3 11.5
18.8 18.8 13.1

9/16

'

'

7
9
9
9

10
10
10
10

4.65
4.40
4.50
4.50

10
11
13
16

10
10
10
10

4.50
4.65
4.70
4.70

23 9
14.6 21
23 9.5 14.1 27
24 10
14.7 31

10
10
10

4.95
5.35
5.50

mm

d1
mm

d2
d3
mm mm

L
t1
t2 R
mm mm mm g S

01 01 00 03
01 01 00 32
01 01 00 35
01 01 00 04

3
3.2
3.5
4

5.6
5.6
6
6.7

10.7
10.7
10.7
10.7

2.5
2.5
2.5
3.2

23
23
23
23

2
2
2.5
3.5

15
15
15
15

7
8
8
9

10
10
10
10

5.00
4.75
4.50
4.15

01 01 00 45
01 01 00 05
01 01 00 55
01 01 00 06

4.5
5
5.5
6

7.3
7.9
8.5
9.2

10.7
10.7
10.7
10.7

3.7
4
4.5
5

23
23
23
23

4
4.5
6
6

15
15
15
15

9
9
9
9

10
10
10
10

4.25
4.25
4.15
4.25

01 01 00 07 7
01 01 00 08 8
01 01 00 09 9
01 01 00 10 10

10.7
11.6
12.8
14.3

10.7
11.6
12.8
14.3

6
7
8
9

23
23
23
23

6.5
8
8
8

13.4
13.1
12.8
14.9

10
11
14
17

10
10
10
10

4.25
4.25
4.45
4.40

01 01 00 11
01 01 00 12
01 01 00 13
01 01 00 14

15.5
16.5
17.8
18.8

15.5
16.5
17.8
18.8

10
11
12
13

23 9
23 9.5
23 9.5
24 10

14.6
14.3
14
14.7

19
24
26
32

10
10
10
10

4.45
5.00
4.70
5.45

Code
'

11
12
13
14

'

STAHLWILLE AS-Drive
STAHLWILLE sockets are equipped with the AS-Drive*
profile: this permits high transmission of forces to the
lands of nuts and bolts without damaging them.
No longer will you have to worry about stripping the
corners off nuts and bolts.
*Anti-Slip-Drive

A
"

d1
mm

d2
d3
mm mm

L
t1
t2 R
mm mm mm g S

01 41 00 08
01 41 00 10
01 41 00 12
01 41 00 14

1/8
5/32
3/16
7/32

5.6
6.7
7.6
8.6

10.7
10.7
10.7
10.7

2.5
3.2
4
5

23
23
23
23

2
3.5
4.5
6

15
15
15
15

7
9
9
9

10
10
10
10

4.35
4.75
4.55
4.60

01 41 00 16
01 41 00 18
01 41 00 20
01 41 00 22

1/4
9/32
5/16
11/32

9.4
10.7
11.6
12.7

10.7
10.7
11.6
12.7

5.5
6.6
7
8.1

23
23
23
23

6
6.5
8
8

15
9
13.2 10
13.1 12
13.3 14

10
10
10
10

4.60
4.60
4.65
4.70

01 41 00 24
01 41 00 28
01 41 00 32
01 41 00 34

3/8
7/16
1/2
9/16

13.7
15.8
17.3
18.8

13.7
15.8
17.3
18.8

8.3
10
11.5
13.1

13.3
14.6
14.1
14.7

10
10
10
10

4.70
4.95
5.35
5.50

Code
'

'

98

e Sockets

40a
'

23 8
23 9
23 9.5
24 10

16
21
27
31

f Sockets

40DL

40aDL/7

Set: Sockets

P Q

P Q

extra deep, metric sizes: E DIN EN 3710, E DIN EN 3709,


DIN 3124/ISO 2725-1, ASME B 107.5M,
American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E,
HPQ high performance steel, chrome plated.

extra deep
Content: 3/16; 1/4; 5/16; 3/8; 7/16; 1/2; 9/16"

1/4"
6,3

DIN
3120

ISO

1174-1

'

Code
'

01 24 00 05
01 24 00 55
01 24 00 06
01 24 00 07
1

mm

d1
mm

5
7.9
5.5 8.5
6
9.2
7 10.7

d2
d3
mm mm
10.7
10.7
10.7
10.7

4
4.5
5
6

01 24 00 08
01 24 00 09
01 24 00 10
01 24 00 11

8
9
10
11

11.6
12.8
14.3
15.5

01 24 00 12
01 24 00 13
01 24 00 14

12
13
14

16.5 16.5 11
17.8 17.8 12
18.8 18.8 13

'

11.6 7
12.8 8
14.3 9
15.5 10

L
t1
t2 R
mm mm mm g S
50
50
50
50

4.5
6
6
6.5

42
42
42
40.9

18
16
18
21

5
5
5
5

13.40
13.50
13.40
13.40

50 8
50 8
50 9
50 10.5

40.1
39.8
41.9
41.6

23
30
35
40

5
5
5
5

13.40
13.40
13.40
14.00

50 12
50 12
50 15

41.3 47
41
50
40.7 57

5
5
5

14.00
14.00
14.00

A
"

d1
mm

01 64 00 10
01 64 00 12
01 64 00 14
01 64 00 16

5/32
3/16
7/32
1/4

6.7
7.6
8.6
9.4

10.7
10.7
10.7
10.7

3.2
4
5
5.2

50
50
50
50

4.5
4.5
6
6

42
42
42
42

13
15
16
19

5
5
5
5

13.00
13.00
13.00
13.00

01 64 00 18
01 64 00 20
01 64 00 22
01 64 00 24

9/32
5/16
11/32
3/8

10.7
11.6
12.7
13.7

10.7
11.6
12.7
13.7

6.5
7
8.1
8.3

50
50
50
50

8
8
9
9

40.2
40.1
39.7
39.7

20
24
26
33

5
5
5
5

13.00
13.00
13.00
13.40

01 64 00 28
01 64 00 32
01 64 00 34

7/16
1/2
9/16

15.8 15.8 10
17.3 17.3 11.5
18.8 18.8 13.1

50 10.5 41.6 42
50 12
41.1 44
50 15
40.7 55

5
5
5

13.40
13.40
13.40

Code
'

'

'

96 01 64 01

241

'

92.60

packed in carton
'

40aDL/10CL

Set:
Sockets with clip strip

Content: 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
1 clip strip No 40CL-2

'

d2
d3
mm mm

Code

P Q

f Sockets

40aDL

'

L
t1
t2 R
mm mm mm g S

'

Code

'

96 01 64 10

350

'

137.50

f Sockets

40aDV

P Q
SAE AS 954, S.B.A.C. AS 40605/40606,
HPQ high performance steel, chrome plated.

STAHLWILLE HPQ-sockets
STAHLWILLE HPQ*-sockets are manufactured from
selected tough steel alloys. The result: they are
extremely durable. HPQ-sockets are free of cadmium
and are there fore suitable for use on titanium alloy
parts and titanium fasteners as used e.g. in the
aerospace industry, where safety is a crucial factor.
*High Performance Quality

'

Code
'

01 65 00 14
01 65 00 16
01 65 00 18
01 65 00 20
'

A
"

d1
mm

7/32
1/4
9/32
5/16

8.6
9.4
10.7
11.6

d2
d3
mm mm
10.7
10.7
10.7
11.6

5
5.2
6.6
7

L
t1
t2 R
mm mm mm g S
31.8
31.8
31.8
31.8

6
6
6.5
8

23.8
23.8
22
21.9

12
13
13
15

10
10
10
10

12.30
12.30
12.30
12.30

99

Sockets, Socket Sets

6,3

DIN
3120

e Sockets

40L

1/4"

402a/5

Set: UNIFLEX sockets

P Q

P Q

extra deep, DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3710,


E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

Content: 1/4; 5/16; 3/8; 7/16; 1/2"

ISO

1174-1

'

mm

d1
mm

01 02 00 04
01 02 00 45
01 02 00 05
01 02 00 55

4
4.5
5
5.5

6.7
7.3
7.9
8.5

10.7
10.7
10.7
10.7

3.2
3.7
4
4.5

50
50
50
50

3.5
4
4.5
6

42
42
42
42

14
15
16
17

10
10
10
10

15.30
15.30
14.10
14.10

01 02 00 06
01 02 00 07
01 02 00 08
01 02 00 09

6
7
8
9

9.2
10.7
11.6
12.8

10.7
10.7
11.6
12.8

5
6
7
8

50
50
50
50

6
6.5
8
8

42
40.9
40.1
39.8

18
24
27
31

10
10
10
10

14.10
13.50
13.70
15.10

01 02 00 10
01 02 00 11
01 02 00 12
01 02 00 13

10
11
12
13

14.3
15.5
16.5
17.8

14.3 9
15.5 10
16.5 11
17.8 12

50 9
41.9 38
50 10.5 41.6 43
50 12
41.3 49
50 12
41
56

10
10
10
10

13.80
15.10
14.20
13.90

Code
'

'

d2
d3
mm mm

L
t1
t2 R
mm mm mm g S
'

Code

'

96 01 54 01

101

'

168.00

f UNIFLEX sockets

402aK

P Q
short version, HPQ high performance steel, chrome plated.

f UNIFLEX sockets

402

P Q
American sizes: SAE AS 954, ASME B 107.1,
HPQ high performance steel, chrome plated.

'

Code
'

01 54 10 24
01 54 10 34

A
"

3/8
9/16

'

Code
'

01 14 00 06
01 14 00 07
01 14 00 08
01 14 00 09
1

mm

d1
mm

6
7
8
9

9.2
10.4
11.6
13

01 14 00 10 10
'

d2
d3
mm mm
12.7
12.7
12.7
12.7

14.2 12.7

L
t1
t2 R
mm mm mm g S

5
6
6.7
8

32
33.5
35
36

38

5.5
6
8
8
12

10
11.5
13
12

16
16
17
20

5
5
5
5

33.60
33.60
33.60
33.60

14

38

33.60

d2
d3
L
mm mm mm

t1
t2 R
mm mm g S

13.6 12.7 6.7 34


9.1 12.0
19
12.7 13.1 37.5 10.3 11.8

18
25

5
5

34.40
34.40

p Sockets

40TX

'

d1
mm

Q
for external TORX screws, HPQ high performance steel, chrome plated.

f UNIFLEX sockets

402a
'

Code
'

A
"

d1
mm

d2
d3
L
mm mm mm

t1
t2 R
mm mm g S

01 54 00 14
01 54 00 16
01 54 00 18
01 54 00 20

7/32
1/4
9/32
5/16

8.6
9.6
11
11.6

12.7
12.7
12.7
12.7

01 54 00 22
01 54 00 24
01 54 00 28
01 54 00 32

11/32
3/8
7/16
1/2

12.7
13.6
15.7
17.3

12.7 8
35
7.5 11.5
12.7 9
38
8.6 13.1
12.7 10.5 39.5 10.7 15
12.7 12
41.5 11.1 16.5

'

100

4.8
5.2
6.4
6.7

32
32
32
35

5.5
5.5
6.5
8

10
10
10
13

'

17
16
19
17

5
5
5
5

34.40
33.60
34.40
33.60

19
20
23
27

5
5
5
5

34.40
33.60
33.60
33.60

Code

size

mm

d1
d2
d3
L
t1
t2 R
mm mm mm mm mm mm g S

01 27 00 04
01 27 00 05
01 27 00 06
01 27 00 07

E4
E5
E6
E7

3.8
4.7
5.7
6.2

5.6
6.7
8
9.6

'

01 27 00 08 E8
01 27 00 10 E10
'

10.7
10.7
10.7
10.7

2
2.8
3.6
3.8

23
23
23
23

4.5
5
5.5
6.5

7.5 10.5 11.6


9.4 12.7 12.7

4.3
5.6

23 7
23 9

15
15
15
15

8
7
10
10

10
10
10
10

6.00
6.00
6.00
6.00

15
15

10 10 6.00
17 10 6.60

h Sockets spline-drive

40aSP

r Screwdriver sockets

41K

1/4"

for slotted screws, blades to DIN 5264,


Chrome Alloy Steel, chrome plated.

6,3

DIN
3120

MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

ISO

1174-1

'

Code

'

Code
'

Spline
size

A d1
"

d2 d3
L
t1
t2
mm mm mm mm mm mm

01 01 10 07 7
01 01 10 08 8
01 01 10 09 9
01 01 10 10 10

7/32
1/4
9/32
5/16

8.6
9.5
11.2
11.6

01 01 10 12 12
01 01 10 14 14

3/8
7/16

13.8 13.8 8.6 23


15.7 15.7 10.4 25

'

10.7
10.7
11.2
11.6

5
5.6
6.6
7.1

22.2
22.2
22.2
22.2

'

14.2
14.2
12.4
12.2

7
10
10
12

1
1
1
1

24.60
32.80
32.80
32.80

8.7 12.6
10.7 14.1

18
24

1
1

33.40
33.40

6
7
8
8

01 28 00 06
01 28 00 08
01 28 00 10
01 28 00 12
1

mm

L1
L2
d
a
b
mm mm mm mm mm

R
g

0.6x3.5
0.8x4
1x5.5
1.2x8

28
28
28
28

9
10
11
12

5
5
5
5

6.15
6.15
6.15
6.15

14

6.80

01 28 00 16 1.6x10* 28
'

h Sockets spline-drive

11.6
11.6
11.6
11.6

16 11.6

0.6
0.8
1
1.2

3.5
4
5.5
8

1.6 10

* to be discontinued
'

i INHEX sockets

44
40aLSP

16
16
16
16

for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

Q
extra deep bolt clearance, MS-33787, MIL-W-8982,
HPQ high performance steel, chrome plated.
'

Code
'

01 05 00 03
01 05 00 04
01 05 00 05
01 05 00 06

'

mm

L1
mm

L2
mm

d
mm

R
g

3
4
5
6

55
55
55
55

30
30
30
30

10.7
10.7
10.7
11.6

14
16
20
26

5
5
5
5

'

Code
'

Spline A d1 d2 d3
L
t1
t2
size
" mm mm mm mm mm mm

01 02 10 07 7
01 02 10 08 8
01 02 10 10 10

7/32
1/4
5/16

'

8.6 10.7
9.5 10.7
11.6 11.6

5 50.8
5.6 50.8
7.1 50.8

6
8
8

42.8
42.8
40.8

R
g

18
24
27

1
1
1

32.90
34.60
35.60

h Uniflex sockets spline-drive

B
"

L1
mm

L2
mm

d
mm

R
g

01 45 00 04
01 45 00 05
01 45 00 06
01 45 00 07

1/16
5/64
3/32
7/64

55
55
55
55

30
30
30
30

10.7
10.7
10.7
10.7

11
12
14
17

5
5
5
5

11.30
11.00
11.00
11.00

01 45 00 08
01 45 00 09
01 45 00 10
01 45 00 12

1/8
9/64
5/32
3/16

55
55
55
55

30
30
30
30

10.7
10.7
10.7
10.7

12
13
14
17

5
5
5
5

11.00
11.00
11.00
11.00

01 45 00 14
01 45 00 16

7/32
1/4

55
55

30
30

10.7
11.6

19
24

5
5

11.00
11.00

Code

Q
MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

i INHEX sockets

44a
'

'

402aSP

9.50
9.50
9.50
9.50

'

i INHEX sockets

44K

for socket head screws, Chrome Alloy Steel, chrome plated.


'

Code
'

Spline A d1 d2 d3
L
t1
t2
size " mm mm mm mm mm mm

01 54 20 16 8
01 54 20 20 10
'

1/4
5/16

9.5 12.7
11.6 12.7

5.6 32
7.1 35

6.4 9.8
8 13

R
g

16
18

5
5

46.40
48.30
'

mm

L1
mm

L2
mm

d
mm

R
g

01 12 00 03
01 12 00 04
01 12 00 05
01 12 00 06

3
4
5
6

28
28
28
28

16
16
16
16

11.6
11.6
11.6
11.6

10
10
10
10

5
5
5
5

6.15
6.15
6.15
6.15

01 12 00 08

28

16

11.6

15

6.15

Code
'

'

101

Sockets, Socket Sets


n Screwdriver sockets

44KTX

1/4"

40CL

Clip strips

for socket retention, with 9 or 10 retaining clips.


Supplied without sockets.

for inside TORX screws, Chrome Alloy Steel, chrome plated.


6,3

DIN
3120

ISO

1174-1

'

Code

size

mm

L1
mm

L2
mm

d
mm

R
g

01 35 00 08
01 35 00 09
01 35 00 10
01 35 00 15

T8
T9
T10
T15

2.3
2.5
2.7
3.3

28
28
28
28

16
16
16
16

11.6
11.6
11.6
11.6

10
10
10
10

5
5
5
5

7.20
7.20
7.20
7.20

01 35 00 20
01 35 00 25
01 35 00 27
01 35 00 30

T20
T25
T27
T30

3.8
4.4
5.0
5.5

28
28
28
28

16
16
16
16

11.6
11.6
11.6
11.6

11
11
11
11

5
5
5
5

7.20
7.20
7.15
7.20

01 35 00 40

T40

6.6

28

16

11.6

12

7.65

'

'

'

Code

size

L
mm

R
g

80 40 00 01
80 40 00 02

1
2

200
300

36
52

5
5

'

'

5.90
5.90

Drive tools and accessories


1/4"

o Screwdriver sockets

44KTXB

u, finish: Chrome Alloy Steel, chrome plated.

with hollow point, for inside TORX screws


(TORX TAMPER RESISTANT), Chrome Alloy Steel, chrome plated.

411
'

Code

size

mm

L1
mm

L2
mm

d
mm

R
g

01 35 10 08
01 35 10 09
01 35 10 10
01 35 10 15

T8
T9
T10
T15

2.3
2.5
2.7
3.3

28
28
28
28

16
16
16
16

11.6
11.6
11.6
11.6

10
10
10
10

5
5
5
5

7.40
7.40
7.40
7.40

01 35 10 20
01 35 10 25
01 35 10 27
01 35 10 30

T20
T25
T27
T30

3.8
4.4
5.0
5.5

28
28
28
28

16
16
16
16

11.6
11.6
11.6
11.6

10
11
11
11

5
5
5
5

7.40
7.40
7.55
7.40

01 35 10 40

T40

6.6

28

16

11.6

12

7.55

'

'

'

Code

L
mm

b
mm

a
mm

R
g

11 23 10 11

118

24

19.5

96

a
mm

'

'

415

36.80

Ratchet

reversible, 22 teeth,
with 2-component handle,
DIN 3122/ISO 3315.

k Screwdriver sockets

44P

Ratchet, fine tooth

reversible, 60 teeth,
with 2-component handle,
for use in confined spaces,
re-engages after movement of 6,
DIN 3122/ISO 3315.

for recessed head screws Phillips-Recess, tips to DIN 5260,


Chrome Alloy Steel, chrome plated.

'

Code

L
mm

b
mm

11 11 10 10

117

22

'

'

415QR N

'

Code
'

01 29 00 01
01 29 00 02
01 29 00 03
01 29 00 04

PH
size
1
2
3
4

L1
mm
28
28
28
28

'

L2
mm
16
16
16
16

d
mm
11.6
11.6
11.6
11.6

R
g

10
11
12
14

S
5
5
5
5

6.15
6.15
6.15
6.15

13

80

47.40

QuickRelease ratchet, fine tooth

reversible, 80 teeth,
with QuickRelease safety
lock and 2-component handle, for use in confined spaces,
re-engages after movement of 4.5, DIN 3122/ISO 3315.
'

l Screwdriver sockets

44PZ

Code

L
mm

b
mm

a
mm

R
g

11 11 10 20

117

22.6

10.7

70

'

for POZIDRIV/SUPADRIV screws, Chrome Alloy Steel, chrome plated.

''

available from June 2014


'

'

Code

PZ
size

L1
mm

L2
mm

d
mm

R
g

01 30 00 01
01 30 00 02

1
2

28
28

16
16

11.6
11.6

10
11

5
5

'

'

102

6.75
6.75

53.50

415QR*

QuickRelease ratchet

416

Flexible joint ratchet

1/4"

reversible, 60 teeth, handle may be


raised or lowered by approx. 90.
Lockable in following positions:
straight, 30 up, 60 up, 30 down.
Unlocked by depressing button in
handle, registered design.

reversible, 22 teeth,
with QuickRelease safety lock
and 2-component handle, DIN 3122/ISO 3315.

6,3

DIN
3120

ISO

1174-1

'

Code

L
mm

b
mm

a
mm

R
g

11 11 00 20

117

22

13

79

'

'

'

51.00

* to be discontinued

Code

L
mm

b
mm

a
mm

R
g

11 26 00 01

170

25

19.5

237

'

'

72.50

'

415SG-QR

4110

QuickRelease ratchet

Spare parts set for ratchets No 411, 416

Content:
1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws

reversible, 22 teeth,
with QuickRelease safety lock and steel handle,
DIN 3122/ISO 3315.

'

Code
'

19 20 00 01
'

47

25.90

'

L
mm

b
mm

a
mm

R
g

11 11 00 30

117

22

13

90

'

'

415QRL

for ratchets from 4/96

Code

'

53.00

QuickRelease ratchet

4150

Spare parts set for ratchets


No 415, 415SK, 415SG

Content:
1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs;
2 screws M 1.7 x 8; 1 cover plate

long, reversible, 22 teeth,


with QuickRelease safety lock and 2-component handle.

'

Code
'

26

'

19 01 00 00

Code

L
mm

b
mm

a
mm

R
g

11 11 01 53

153

22

13

96

'

'

415B

'

4150QR

63.00

Bit ratchet

26.30

Spare parts set for ratchets


No 415QR, 415SG-QR

reversible, 22 teeth,
with 2-component handle and
inside hexagon, 1/4",
DIN 3126/ISO 1173 D 6.3
for Bits Screwdriver sockets 1/4". Internal hex drive with a collar-thrust
spring. Bits are easy to insert, lock securely in position and can be
removed just as easily; even hex bits with a wide groove
(Type E, DIN 3126/ISO 1173).

Content:
1 pinion; 1 pawl; 2 levers with pin; 1 ball; 2 compression springs;
2 screws M 1.7 x 8; 1 cover plate
'

Code
'

19 01 10 20
'

24

29.30

'

Code

L
mm

b
mm

a
mm

R
g

11 13 10 11

117

22

12

76

'

'

415SGB

400
57.50

Bit ratchet

'

reversible, 22 teeth,
with steel handle and
inside hexagon, 1/4",
DIN 3126/ISO 1173 D 6.3 for Bits Screwdriver sockets 1/4".
Internal hex drive with a collar-thrust spring. Bits are easy to insert, lock
securely in position and can be removed just as easily; even hex bits with
a wide groove (Type E, DIN 3126/ISO 1173).

Code

L
mm

b
mm

a
mm

R
g

11 13 00 11

117

22

12

85

'

Code

L
mm

R
g

11 05 00 10

150

70

'

'

400QR

9.35

QuickRelease drive handle

DIN 3122/ISO 3315,


with QuickRelease safety lock, patent.

'

'

Drive handle

DIN 3122/ISO 3315.

'

Code

L
mm

R
g

11 05 10 10

150

80

59.00
'

'

10.90

103

Sockets, Socket Sets


400 Drall

1/4"
6,3

Drive handle

405

Extensions

DIN 3123/ISO 3316.

with 1/4" square drive in end of


handle, DIN 3122/ISO 3315.

DIN
3120

'

ISO

1174-1

Code

L
mm

R
g

11 05 00 11

150

110

'

'

'

10.40

Code

size

L
mm

d
mm

R
g

11 01 00 01
11 01 00 06
11 01 00 02
11 01 00 10

2
4
6
10

54
100
150
254

11.6
11.6
11.6
11.6

29
46
65
115

5
5
5
1

6.55
6.75
7.20
9.90

11 01 00 14

14

356

11.6

155

11.70

'

401

Drive handle

flexible shaft (right hand rotation


only), maximum torque 5 N m.

'

'

Code

L
mm

R
g

11 05 10 02

240

130

'

'

403

405W
18.90

Extensions with wobble-drive

swivel angle 8 each side, max. torque 40 N m.

Flexible handle

DIN 3122/ISO 3315,


with 2-component handle.
'

Code
'

11 06 10 10
'

404

L
mm
154.5

R
g

70

'

S
1

27.50

Sliding T-handle

Code

size

L
mm

d
mm

R
g

11 01 00 11
11 01 00 16
11 01 00 12
11 01 00 20

2
4
6
10

54
100
150
254

11.6
11.6
11.6
11.6

28
45
55
110

1
1
1
1

7.55
8.70
9.00
11.70

11 01 00 24

14

356

11.6

155

13.50

'

DIN 3122/ISO 3315.

'

405QR

'

Code

L
mm

R
g

11 07 00 00

116

38

'

'

404QR

8.95

QuickRelease extensions

patent, DIN 3123/ISO 3316.

QuickRelease sliding T-handle

with QuickRelease safety locks,


patent.
'

Code

L
mm

R
g

11 07 10 00

116

52

'

'

413

10.30

Speeder brace

'

Code

size

L
mm

d
mm

R
g

11 01 10 01
11 01 10 06
11 01 10 02
11 01 10 13

2
4
6
13

54
102
150
330

11.6
11.6
11.6
11.6

28
49
65
140

1
1
1
1

7.55
7.70
8.35
13.40

11 01 10 05

14

356

11.6

150

13.60

'

with steel handle,


for greater axial power transmission,
detachable palm head,
working radius 70 mm.

'

'

Code

L
mm

R
g

11 10 00 01

440

352

'

'

406
55.50

Extension, flexible

(right hand rotation only)


maximum torque 5 N m.
'

Code

L
mm

d
mm

R
g

11 04 00 00

152

11.6

61

'

'

104

17.10

407

Universal joint

412

DIN 3123/ISO 3316.

'

Code

L
mm

d
mm

R
g

11 02 00 00

37

12.8

23

'

'

407QR

21.00

Bit holder

1/4"

6,3

c 1/4" inside hexagon,

3120

DIN

DIN 3126/ISO 1173 D 6.3.


Internal hex drive with a collar-thrust spring.
Bits are easy to insert, lock securely in position and can be removed just
as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).
HPQ high performance steel.

ISO

1174-1

'

QuickRelease universal joint

Code

L
mm

d
mm

R
g

11 18 00 10

25

11.6

15

'

'

15.40

with QuickRelease safety lock, patent.

412-1

Bit holder

Q
c 1/4" inside hexagon, DIN 3126/ISO 1173 D 6.3
Outer w 10 mm for use in tools with 10 mm

'

Code

L
mm

d
mm

R
g

11 02 10 00

45

13

35

'

'

409

24.10

Adaptor

Q
1/4"

socket x 3/8" plug (6.3 x 10 mm),


DIN 3123/ISO 3316, HPQ high performance steel.

internal hex drive or internal double hexagon


(e.g. "FLEXI" double-ended flexi-joint spanners, T-handle universal joint
spanners, box spanners, ratchet ring spanners etc.).
Internal hex drive with a collar-thrust spring.
Bits are easy to insert, lock securely in position and can be removed just
as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).
HPQ high performance steel.
'

outside
Code
'

11 18 00 20 10 mm

'

Code

L
mm

d
mm

R
g

11 03 00 02

25

12.8

18

'

'

'

417/1

8.00

L
mm

d
mm

R
g

20

11.6

11

12.80

Locking adaptor

with hexagon key wrench


No 10760aCV 3/32".

409M/432M/ Set adaptors, 3 pieces


514M/3

'

1/4"

socket x 3/8" plug,


3/8" socket x 1/2" plug,
1/2" socket x 3/4" plug.

Code

L
mm

d
mm

R
g

96 11 27 01

42

13

23

'

'

29.95

'

Code
'

96 12 10 02
'

409M
1/4"

120

56.90

Adaptor

socket x 3/8" plug (6.3 x 10 mm).

'

Code

L
mm

mm

R
g

11 03 00 10

13

25

14

'

'

410

15.20

Adaptor

Q
1/4"

socket x 1/2" plug (6.3 x 12.5 mm),


HPQ high performance steel.

'

Code

L
mm

d
mm

R
g

11 03 00 03

28

16.5

36

'

'

12.10
105

Sockets, Socket Sets


4008

1/4"
6,3

DIN
3120

ISO

1174-1

Tools for Hi-Lok bolts

Ratcheting BIT holder

1 Easy change of direction (anticlockwise, clockwise and fixed)


by simply twisting the locking ring
1 Ergonomically designed, non-slip 2-component handle for optimum
force transmission
1 Storage compartment for 6 bits in the handle; push button to open
(Size 1)
1 For BITS screwdriver inserts with external hex 1/4"
DIN 3126/ISO 1173 Type C 6.3
1 1/4" sockets can be used with Adaptor No 3115/1
(external hex and square drive 1/4")
1 Easy bit change thanks to internal hex. drive with magnet
1 Knurled spin section for faster screw advance
1 Heavy-duty mechanism with 48 teeth (7.5 working angle)

40aD/8/1H

Socket set

for Hi-Lok bolts.


Content:
5 sockets with bi-hexagon
No 40aD:
sizes 7/32; 1/4; 5/16; 11/32; 3/8"
3 offset screwdrivers
No 10759a: 1/16; 5/64; 3/32"
1 ratchet No 415SGH
'

Code
'

96 01 53 03
'

415SGH

size 1

425

119.95

Ratchet

reversible, 22 teeth, patent,


axially drilled pinion,
locking facility for sockets.
For use on Hi-Lok bolts in the aerospace industry.
'

Code

L
mm

b
mm

11 11 00 02

117

22

'

L2
L1

'

inside
'

18 12 00 01
18 12 00 02

13

R
g

90

66.50

size 2

414H

'

Code

a
mm

size
1
2

'

"

L1
mm

D 6.3
D 6.3

1/4
1/4

127
25

L2
mm

d
mm

R
g

250
95

10
10

202
134

1
1

21.60
18.00

inside b DIN 3126/ISO 1173

'

Code

'

'

4008/27/1R

Hi-Lok extensions

with lock-on facility as on


ratchet No 415SGH, patent.

11 24 00 11
11 24 00 12
11 24 00 13

Ratcheting BIT holder set

size

L
mm

d
mm

R
g

2
4
6

54
102
152

13
13
13

34
49
66

1
1
1

'

10759

37.70
38.10
39.60

Offset screwdrivers

with hexagon end for ratchet


No 415SGH, patent.
Round shaft on screwdriver enables
locking of ball retainer.

'

Code
'

29 pieces
Content:
1 Ratcheting bit holder No 4008-1
3 Bits k 1221; 1222; 1223
3 Bits l PZ1221; PZ1222; PZ1223
6 Bits o 1440 T10; 1441 T15; 1442 T20; 1443 T25; 1445 T30; 1446 T40
3 Bits i 1301; 1302; 1303
3 Bits r 1163 0.6 x 4.5; 1165 0.8 x 5.5; 1166/1 1.2 x 6.5 mm
1 square drive extension No 3115/1 with 1/4" outer hex. and outer square
drives for attaching 1/4" u sockets
9 sockets No 40, 1/4" u sizes 4; 5; 5.5; 6; 7; 8; 10; 11; 13 mm
'

Code
'

96 18 12 03
'

106

43 06 20 02
43 06 40 02

S
1

140.80

1
2

'

10759a

mm

L
mm

R
g

2
2

50
100

5
8

5
5

4.00
4.30

Offset screwdrivers

'

Code
'

size

B
"

L
mm

R
g

50
100
50
100

5
8
5
8

5
5
5
5

3.95
3.95
3.95
3.95

50
100

5
8

5
5

3.95
3.95

43 56 00 04
43 56 40 04
43 56 00 05
43 56 40 05

1
2
1
2

1/16
1/16
5/64
5/64

43 56 00 06
43 56 40 06

1
2

3/32
3/32

'

1025

size

40/9/4

Socket set 1/4" u

40/13/6QR

in sturdy sheet steel case,


13 pieces
Content:
9 sockets with hexagon No 40:
sizes 4; 5; 5.5; 6; 7; 8; 10; 11;
13 mm
1 ratchet No 415
2 extensions
No 405/2 (54 mm),
No 405/6 (150 mm)
1 universal joint No 407

Socket set 1/4" u

1/4"

6,3

'

Code

'

DIN

in sturdy ABS plastic case,


19 pieces
Content:
13 sockets with hexagon No 40:
sizes 3.5; 4; 4.5; 5; 5.5; 6; 7;
8; 9; 10; 11; 12; 13 mm
1 ratchet No 415QR
2 extensions
No 405QR/2 (54 mm), No 405QR/6 (150 mm)
1 universal joint No 407QR
1 drive handle No 400QR
1 T-handle No 404QR

3120

ISO

1174-1

'

96 01 01 19

820

'

140.50

Code

'

40D/9/4

Socket set 1/4" u

96 01 01 80
'

in sturdy sheet steel case,


13 pieces
Content:
9 sockets with bi-hexagon
No 40D: sizes 4; 5; 5.5; 6; 7;
8; 10; 11; 13 mm
1 ratchet No 415
2 extensions
No 405/2 (54 mm),
No 405/6 (150 mm)
1 universal joint No 407

40/44/17/5

Code

96 01 03 04

852

'

186.75

Socket set 1/4" u

in sturdy sheet steel case,


22 pieces
Content:
13 sockets with hexagon No 40:
sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9;
10; 11; 12; 13 mm
4 INHEX sockets No 44:
sizes 3; 4; 5; 6 mm
1 ratchet No 415
1 extension No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404

'

'

765

141.35
'

40/13/6

Socket set 1/4"

in sturdy sheet steel case,


19 pieces
Content:
13 sockets with hexagon No 40:
sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9;
10; 11; 12; 13 mm
1 ratchet No 415
2 extensions
No 405/2 (54 mm),
No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404

'

96 01 01 24
'

96 01 01 13

1071

'

40/44/17/
5QR

208.45

Socket set 1/4" u

'

Code

Code
'

R
g

1027

177.00

in sturdy ABS plastic case,


22 pieces
Content:
13 sockets with hexagon No 40:
sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9;
10; 11; 12; 13 mm
4 INHEX sockets No 44:
sizes 3; 4; 5; 6 mm
1 ratchet 415QR
1 extension No 405/6QR (150 mm)
1 universal joint No 407QR
1 drive handle 400QR
1 T-handle No 404QR
'

Code
'

96 01 01 81
'

R
g

768

217.20

107

Sockets, Socket Sets


40/23/7

1/4"
6,3

DIN
3120

ISO

1174-1

Socket set 1/4" u

40D/23/6

in sturdy sheet steel case,


30 pieces
Content:
12 sockets with hexagon No 40:
sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;
11; 12; 13 mm
4 INHEX sockets No 44:
sizes 3; 4; 5; 6 mm
3 Bits k 1221: size 1; 1222: size 2; 1223: size 3
4 bits r 1162: 0.6 x 3.5 mm, 1164: 0.8 x 4 mm; 1166: 1 x 5.5 mm;
1168: 1.6 x 8 mm
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404
1 bit-holder No 412
'

'

Code

'

Socket set 1/4" u

in sturdy sheet steel case,


29 pieces
Content:
11 sockets with bi-hexagon No 40D:
sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;
13; 14 mm
3 screwdriver sockets
r No 41K: sizes 0.6 x 3.5;
1.0 x 5.5; 1.2 x 8 mm
5 INHEX sockets No 44K:
sizes 3; 4; 5; 6; 8 mm
4 screwdriver sockets k No 44P: sizes 1; 2; 3; 4
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404

Code

'

96 01 01 34

1355

'

243.50

96 01 03 06

1120

'

40D/23/7

Socket set 1/4" u

40/24/6

in sturdy sheet steel case,


30 pieces
Content:
2 sockets with hexagon No 40:
sizes 4; 4.5 mm
10 sockets with bi-hexagon No 40D:
sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;
13 mm
4 INHEX sockets No 44: sizes 3; 4; 5; 6 mm
3 bits k No 1221: size 1; No 1222: size 2; No 1223: size 3
4 Bits r 1162: 0.6 x 3.5 mm; 1164: 0.8 x 4 mm; 1166: 1 x 5.5 mm;
1168: 1.6 x 8 mm
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404
1 bit-holder No 412

244.25

Socket set 1/4" u

in sturdy ABS plastic case,


30 pieces
Content:
12 sockets with hexagon No 40:
sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11;
12; 13; 14 mm
3 screwdriver sockets r No 41K:
0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm
5 INHEX sockets No 44K:
sizes 3; 4; 5; 6; 8 mm
2 screwdriver sockets k No 44P: sizes 1; 2
2 screwdriver sockets l No 44PZ: sizes 1; 2
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404
'

Code
96 01 03 05

1380

'

96 01 01 38

Socket set 1/4" u

96 01 01 36
'

108

Socket set 1/4" u

in sturdy ABS plastic case,


30 pieces
Content:
12 sockets with hexagon No 40:
sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11;
12; 13; 14 mm
3 screwdriver sockets r No 41K:
0.6 x 3.5; 1.0 x 5.5; 1.2 x 8 mm
5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm
2 screwdriver sockets k No 44P: sizes 1; 2
2 screwdriver sockets l No 44PZ: sizes 1; 2
1 ratchet No 415QR
2 extensions No 405QR/2 (54 mm), No 405QR/6 (150 mm)
1 universal joint No 407QR
1 drive handle No 400QR
1 T-handle No 404QR

'

'

247.40

in sturdy sheet steel case,


29 pieces
Content:
11 sockets with hexagon No 40:
sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;
13; 14 mm
3 screwdriver sockets
r No 41K: sizes 0.6 x 3.5;
1.0 x 55; 1.2 x 8 mm,
5 INHEX sockets No 44K:
sizes 3; 4; 5; 6; 8 mm
4 screwdriver sockets k No 44P: sizes 1; 2; 3; 4
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404

Code

845

'

244.55

40/24/6QR
40/23/6N

'

'

Code

'

'

R
g

Code
'

1167

243.35

96 01 01 82
'

R
g

915

259.15

40ma/25/8

Socket set 1/4" u

40/52/27/11 Socket set 1/4"; 1/2" u

1/4"

in sturdy sheet steel case,


38 pieces
Content:
9 sockets with hexagon No 40:
sizes 4; 5; 5.5; 6; 7; 8; 9; 10;
11 mm
10 sockets with hexagon No 52:
sizes 13; 16; 17; 18; 19; 21; 22;
24; 27; 30 mm
3 INHEX sockets No 44: sizes 3; 4; 5 mm
5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm
2 ratchets No 415, No 512
4 extensions No 405/2 (54 mm), No 509/5 (130 mm),
No 405/6 (150 mm), No 509/10 (255 mm)
2 universal joints No 407, No 510
1 drive handle No 400
2 T-handles No 404, No 506

in sturdy sheet steel case,


33 pieces
Content:
25 sockets with hexagon
No 40: sizes 3.2; 3.5; 4; 4.5; 5;
5.5; 6; 7; 8; 9; 10; 11; 12;
13; 14 mm
No 40a: sizes 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 extension, flexible No 406 (152 mm)
1 universal joint No 407
1 drive handle No 400
1 flexible handle No 403
1 T-handle No 404

6,3

DIN
3120

ISO

1174-1

'

Code

'

'

96 01 01 62

2050

'

294.10

Code
96 01 01 60
'

40/45/36/12 Socket set 1/4"; 3/8"

in sturdy sheet steel case,


48 pieces
Content:
82 sockets with hexagon No 40:
sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9 mm
12 sockets with bi-hexagon No 45:
sizes 10; 11; 12; 13; 14; 15; 16;
17; 18; 19; 21; 22 mm
1 socket with bi-hexagon, long, with rubber insert No 4600:
size 16 mm - 5/8"
3 bits k 1221: size 1; 1222: size 2; 1223: size 3
1 bit l PZ1222: size 2
6 bits r 1160: 0.5 x 3 mm; 1162: 0.6 x 3.5 mm; 1164: 0.8 x 4 mm; 1166:
1 x 5.5 mm; 1166/1: 1.2 x 6.5 mm; 1168: 1.6 x 8 mm
5 bits i 1300: 3 mm; 1301: 4 mm; 1302: 5 mm; 1303: 6 mm;
1304: 8 mm
2 ratchets No 415, No 435
3 extensions No 427/3 (76 mm), No 405/6 (150 mm),
No 427/10 (240 mm)
2 universal joints No 407, No 428
1 drive handle No 400
1 T-handle No 425
2 bit-holder No 412, No 442
1 adaptor No 431

R
g

'

40TX/
44KTX/15/6

5275

469.65

Socket set TORX 1/4" u

in sturdy sheet steel case,


21 pieces
Content:
6 sockets for external TORX screws
No 40TX: sizes E4; E5; E6; E7; E8;
E10
9 screwdriver sockets for internal
TORX screws No 44KTX:
sizes T8; T9; T10; T15;
T20; T25; T27; T30; T40
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404

'

Code

R
g

'

96 01 27 01
'

999

221.85

'

Code
'

96 01 10 47
'

88TX

R
g

3005

438.75

Socket set TORX 1/4" u

in sturdy sheet steel case,


36 pieces
Content:
10 sockets with hexagon No 40:
sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;
13 mm
6 sockets for external TORX
screws No 40TX:
sizes E4; E5; E6; E7; E8; E10
5 INHEX sockets No 44K: sizes 3; 4; 5; 6; 8 mm
9 screwdriver sockets for internal TORX screws No 44KTX:
sizes T8; T9; T10; T15; T20; T25; T27; T30; T40
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 universal joint No 407
1 drive handle No 400
1 T-handle No 404
'

Code
'

98 81 88 01
'

R
g

1455

298.45

109

Sockets, Socket Sets


89TX

1/4"
6,3

DIN
3120

ISO

1174-1

Socket set TORX 1/4; 3/8; 1/2" u

40a/9/4

in sturdy sheet steel case,


35 pieces
Content:
3 sockets for external TORX screws
No 40TX: sizes E4; E5; E6
2 screwdriver sockets for internal
TORX screws No 44KTX:
sizes T8; T9
4 sockets for external TORX screws No 45TX:
sizes E7; E8; E10; E12
5 screwdriver sockets for internal TORX screws No 49TX:
sizes T10; T15; T20; T25; T27
6 sockets for external TORX screws No 50TX:
sizes E11; E14; E16; E18; E20; E24
6 screwdriver sockets for internal TORX screws No 54TX:
sizes T30; T40; T45; T50; T55; T60
7 bits o 1440: T10; 1441: T15; 1442: T20; 1443: T25; 1444: T27;
1445: T30; 1446: T40
1 bit-holder No 442
1 TORX controller: sizes E6; E7; E8; E10; E12; E14; E16; T10; T15; T20;
T25; T27; T30; T40; T45; T47; T50; T55; T60

3
'

Code
'

98 81 09 08
'

86TX

R
g

2765

364.00

Socket set TORX 1/4; 1/2" u

'

96 01 41 07

40aD/9/4

in sturdy sheet steel case,


13 pieces
Content:
9 sockets with bi-hexagon No 40aD:
sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;
3/8; 7/16; 1/2"
1 ratchet No 415
2 extensions No 405/2 (54 mm),
No 405/6 (150 mm)
1 universal joint No 407

110

R
g

'

96 01 53 02

830

'

40ma/25/8

143.90

Socket set 1/4" u

in sturdy sheet steel case,


33 pieces
Content:
25 sockets with hexagon
No 40: sizes 3.2; 3.5; 4; 4.5; 5;
5.5; 6; 7; 8; 9; 10; 11; 12;
13; 14 mm
No 40a: sizes 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
1 ratchet No 415
2 extensions No 405/2 (54 mm), No 405/6 (150 mm)
1 extension, flexible No 406 (152 mm)
1 universal joint No 407
1 drive handle No 400
1 flexible handle No 403
1 T-handle No 404
'

96 01 01 62

'

7045

144.35

Socket set 1/4" u

Code

'

96 01 27 02

920

'

'

'

'

Code

'

Code

'

in sturdy sheet steel case,


63 pieces
Content:
9 sockets with hexagon No 40:
sizes 4; 5; 5.5; 6; 7; 8; 9; 10;
11 mm
10 sockets with hexagon No 52:
sizes 13; 16; 17; 18; 19; 21; 22;
24; 27; 30 mm
5 sockets for external TORX screws No 40TX:
sizes E4; E5; E6; E7; E8
7 sockets for external TORX screws No 50TX:
sizes E10; E12; E14; E16; E18; E20; E24
3 INHEX sockets No 44: sizes 3; 4; 5 mm
5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm
6 screwdriver sockets for internal TORX screws No 44KTX:
sizes T8; T9; T10; T15; T20; T25
7 screwdriver sockets for internal TORX screws No 54TX:
sizes T27; T30; T40; T45; T50; T55; T60
2 ratchets No 415, No 512
4 extensions No 405/2 (54 mm), No 509/5 (130 mm),
No 405/6 (150 mm), No 509/10 (255 mm)
2 universal joints No 407, No 510
1 drive handle No 400
2 T-handles No 404, No 506

Code

Socket set 1/4" u

in sturdy sheet steel case,


13 pieces
Content:
9 sockets with hexagon No 40a:
sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32;
3/8; 7/16; 1/2"
1 ratchet No 415
2 extensions No 405/2 (54 mm),
No 405/6 (150 mm)
1 universal joint No 407

720.20

R
g

2050

294.10

40aD/12/7QR Socket set 1/4" u

ES 1/4" + 10760CV

1/4"

6,3

DIN

in sturdy sheet steel case,


19 pieces
Content:
1 socket with hexagon No 40a:
size 1/8"
11 sockets with bi-hexagon No
40aD: sizes 5/32; 3/16; 7/32; 1/4; 9/32;
5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
1 ratchet No 415SG-QR
3 extensions No 405/2QR (2x) (54 mm), No 405/6QR (150 mm)
1 universal joint No 407QR
1 drive handle No 400QR
1 bit-holder No 412

3120

ISO

1174-1

175 x 350 x 41 mm, 27 pieces


'

Code

'

96 83 81 10

1035

'

1/4"

No 40

13; 14 mm

'

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;


12 mm

'

'

Code
96 01 42 08

1020

'

40aD/30/7QR

'

'

'

209.35

'

'

Socket set 1/4" u

'

'

in sturdy sheet steel case,


37 pieces
Content:
1 socket with hexagon No 40a:
size 1/8"
11 sockets with bi-hexagon No 40aD:
sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
11 sockets with bi-hexagon, long, No 40aDL:
sizes 5/32; 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16"
7 UNIFLEX sockets with bi-hexagon No 402a:
sizes 1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2"
1 ratchet No 415SG-QR
3 extensions No 405/2QR (2x) (54 mm), No 405/6QR (150 mm)
1 universal joint No 407QR
1 drive handle No 400QR
1 bit-holder No 412

'

83 81 20 28
'

Empty tray

175 x 350 x 43 mm, 27 pieces


'

R
g

96 83 81 76

'

96 01 42 05
'

987

'

No 40

2210

8.65

TCS 1/4" + 10760CV

'

'

107

Code

Code

184.55

a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;

599.10

195.60

a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;

13; 14 mm

'

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10;


12 mm

'

'

'

'

'

'

'

'

1/4"

111

Sockets, Socket Sets


TCS 40/41/44/8

1/4"

TCS 40/35/9

175 x 350 x 45 mm, 33 pieces

175 x 350 x 40 mm, 44 pieces

6,3

DIN
3120

ISO

1174-1

'

'

Code

'

96 83 02 17

715

'

No 40
No 41K
No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4"

a, k sizes 1; 2; 3; 4

No PZ 1221
No PZ 1222

1/4"

'

'

'

273.05

96 83 06 01

E, l size 1
1/4" E, l size 2

No 40

D 116 mm

'

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

'

'

No 409
'

No 412
'

No 415

3/8"
1/4"
1/4"

D 1/4" a
ba
D

No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4"

a, k sizes 1; 2; 3; 4 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2
No 405/4

1/4"
1/4"

D a 54 mm
D a 100 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 409

3/8"

D 1/4" a

'

'

'

'

'

'

112

1/4" a, r 0.6 x 3.5; 1.0 x 5.5;


1.2 x 8 mm

'

1/4"

'

No 41K

'

No 404
'

1/4" a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;


11; 12; 13 mm

'

'

445.90

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;

No 40L
'

D 150 mm

1/4"

13; 14 mm

'

1/4"

No 400
'

1045

'

a, r 0.6 x 3.5; 1.0 x 5.5;

1.2 x 8 mm

'

'

1/4"

'

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;

13; 14 mm

'

1/4"

Code

f Sockets

45

e Sockets

456

3/8"

P Q

P Q

metric sizes: DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709,


American sizes: ASME B 107.1, Fed. Spec. GGG-W-641,
SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads),


HPQ high performance steel, chrome plated.

10

DIN
3120

ISO

1174-1

'

'

Code
'

mm

d1
d2
d3
L
t1
t2 R
mm mm mm mm mm mm g

02 01 00 07 7
02 01 00 08 8
02 01 00 09 9
02 01 00 10 10

10.5
11.7
13
14.3

16.5
16.5
16.5
16.5

6
7
8
9

02 01 00 11
02 01 00 12
02 01 00 13
02 01 00 14

11
12
13
14

15.6
16.9
18
19.4

16.5
17.5
17.5
17.5

02 01 00 15
02 01 00 16
02 01 00 17
02 01 00 18

15
16
17
18

20.6
21.7
23
24.2

02 01 00 19
02 01 00 20
02 01 00 21
02 01 00 22

19
20
21
22

25.2
26.2
27.7
28.7

02 01 00 24 24
'

24
25
25
27

6
7
7
8.5

Code
'

12.5
13.5
13.5
15.5

19
19
19
20

10
10
10
10

6.70
6.15
6.25
6.25

10
11
12
13

27 8.5 13.7
28 9.5 14.4
30 11.5 16.1
30 11.5 15.8

21
24
30
28

10
10
10
10

6.25
6.25
6.15
6.55

19
19
19
19

14
15
16
17

31
31
31
32

12.5
13.5
12.5
13.5

19.2
18.9
18.6
19.3

40
33
44
39

10
10
10
5

6.65
6.65
6.55
6.65

19
20
21
21

18
19
20
21

32
34
34
35

13.5
15.5
15.5
17

19
20.7
20.5
21.2

39
51
53
61

5
5
5
5

6.65
8.60
7.85
7.70

31.5 24

21

35 18

21.2 92

11.10

Code
'

"

d1
d2
d3
L
t1
t2 R
mm mm mm mm mm mm g

02 41 00 16 1/4
9.7 16.5
02 41 00 20 5/16 11.7 16.5
02 41 00 22 11/32 12.5 16.5
02 41 00 24 3/8
13.7 16.5
1

5.2
7
8.1
8.4

24
25
25
27

6
7
7
8.5

12.5
13.5
13.5
15.5

10
10
10
10

6.65
6.65
6.65
6.65

10
10
10
5

6.80
6.80
6.70
8.05

31
34
41
52

5
5
5
5

7.20
7.20
7.90
9.45

35 18 21
59
35 18.5 20.7 95
35 18.5 20.2 97

5
5
5

8.50
10.50
10.90

15.7
18
20.2
20.6

16.5
17.5
19
19

10
11.5
13.1
14

28 9.5 15.1 20
30 11.5 16.5 24
31 12.7 16.8 28
31 13 19.2 36

02 41 00 36 5/8
02 41 00 38 11/16
02 41 00 40 3/4
02 41 00 42 13/16

21.7
23.4
25.2
27.2

19
19
19
20.5

15
16.3
18
19.4

31
32
32
34

02 41 00 44 7/8
28.7 22 21
02 41 00 46 15/16 31.5 24 22.6
02 41 00 48 1
33 25.5 24.2
'

02 11 00 07 7
02 11 00 08 8
02 11 00 09 9
02 11 00 10 10

10.5
11.7
13
14.3

16.5
16.5
16.5
16.5

6
7
8
9

02 11 00 11
02 11 00 12
02 11 00 13
02 11 00 14

11
12
13
14

15.6
16.9
18
19.4

16.5
17.5
17.5
17.5

02 11 00 15
02 11 00 16
02 11 00 17
02 11 00 18

15
16
17
18

20.6
21.7
23
24.2

02 11 00 19
02 11 00 20
02 11 00 21
02 11 00 22

19
20
21
22

25.2
26.2
27.7
28.7

'

L
t1
t2 R
mm mm mm g S
24
25
25
27

6
7
7
8.5

12.5
13.5
13.5
15.5

19
19
20
20

10
10
10
10

6.60
6.35
6.30
6.35

10
11
12
13

27 8.5 13.7
28 9.5 14.4
30 11.5 16.1
30 11.5 15.8

21
24
25
29

10
10
10
10

6.45
6.35
6.25
6.65

19
19
19
19

14
15
16
17

31
31
31
32

12.5
13.5
12.5
13.5

19.2
18.9
18.6
19.3

30
34
45
42

10
10
10
10

6.80
6.90
6.70
6.90

19.6
20.5
21.8
21

18
19
20
21

32
34
34
35

13.5
15.5
15.5
17

19
20.7
20.5
21.2

43
53
59
59

10
10
10
10

6.70
8.85
8.20
8.20

f Sockets

460a

18
19
19
20

02 41 00 28 7/16
02 41 00 32 1/2
02 41 00 34 9/16
02 41 00 35 19/32
1

d3
mm

SAE AS 954-E, S.B.A.C. AS 40610/40611, ASME B 107.1,


HPQ high performance steel, chrome plated.

'

d1
d2
mm mm

P Q

f Sockets

45a

mm

13.5
14.7
15.9
16.5

18.9
19.5
19
20.5

'

Code
'

A
"

d1
d2
mm mm

d3
mm

02 62 00 16
02 62 00 20
02 62 00 24
02 62 00 28

1/4
5/16
3/8
7/16

9.9
11.5
13.7
15.7

02 62 00 32

1/2

17.5 17.8 11.5

'

16.5
5.2
16.5
7
16.5
8.5
16.5 10

L
t1
t2 R
mm mm mm g S
32 7
32 8.5
38 9
38 11

20.5
20.5
26.5
24.5

21
22
29
33

5
5
5
5

13.70
13.70
13.70
13.70

44 12

30

44

13.70

STAHLWILLE AS-Drive

STAHLWILLE HPQ-sockets

STAHLWILLE sockets are equipped with the AS-Drive*


profile: this permits high transmission of forces to the
lands of nuts and bolts without damaging them.
No longer will you have to worry about stripping the
corners off nuts and bolts.

STAHLWILLE HPQ*-sockets are manufactured from


selected tough steel alloys. The result: they are
extremely durable. HPQ-sockets are free of cadmium
and are there fore suitable for use on titanium alloy
parts and titanium fasteners as used e.g. in the
aerospace industry, where safety is a crucial factor.

*Anti-Slip-Drive

*High Performance Quality

Unverbindlich empfohlene Preise ohne MwSt.

113

Sockets, Socket Sets

10

DIN
3120

ISO

1174-1

f Sockets

46

3/8"

e Spark plug socket

3466

P Q

P Q

extra deep, metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3710,


E DIN EN 3709, ASME B 107.5M,
American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E,
HPQ high performance steel, chrome plated.

extra deep, with magnet, HPQ high performance steel, chrome plated.

'

Code
'

02 14 00 36 16-5/8

'

Code

mm/"

d1
mm

d2 d3
mm mm

L
t1
t2
mm mm mm

02 02 00 08
02 02 00 10
02 02 00 11
02 02 00 12

8
10
11
12

11.7
14.3
15.6
16.9

16.5
16.5
16.5
17.5

7
9
10
11

54
54
54
54

9
20
20
20

02 02 00 13
02 02 00 14
02 02 00 15
02 02 00 16

13
14
15
16

18
19.4
20.6
21.7

17.5
17.5
19
19.5

12
13
14
15

54
60
60
60

20
25
25
25

02 02 00 17
02 02 00 18
02 02 00 19
02 02 02 08

17
18
19
20.8-13/16 1)

23
24.2
25.2
27.2

21
22
23
25

16
17
18
-

27.7
28.7

25.5
26.5

20
21

'

02 02 00 21 21
02 02 00 22 22
'

R
g

42.5
42.5
40.7
40.4

36
41
51
57

10
10
10
10

13.40
12.80
14.00
13.70

40.1
45.8
48.2
47.9

61
75
85
81

10
10
10
10

13.20
14.00
14.70
15.00

65
65
65
65

30 52.6
30 52.3
30 52
18
-

97
121
112
151

10
10
10
10

15.60
17.00
17.00
16.30

65
65

30 51.5
30 51.2

137
178

5
5

18.20
18.40

) with rubber insert for spark plugs

'

A
"

d1
d2
d3
L
t1
t2
mm mm mm mm mm mm

R
g

1/4
5/16
3/8
7/16

9.7
11.7
13.7
15.7

16.5 5.2
16.5 7
16.5 8.4
16.5 10

54
54
54
54

9
9
20
20

42.5
42.5
42.5
40.7

33
35
45
53

5
5
5
5

13.70
13.70
12.70
13.00

02 42 00 32
02 42 00 34
02 42 00 35
02 42 00 36

1/2
9/16
19/32
5/8

18
20.2
20.6
21.7

17.5
19
19
19.5

11.5
13.1
14
15

54
60
60
60

20
25
25
25

40.2
45.8
48.2
47.9

64
66
84
81

5
5
5
5

13.30
14.30
14.80
14.30

02 42 00 38
02 42 00 40
02 42 00 42
02 42 00 44

11/16
3/4
13/16
7/8

23.4
25.2
27.2
28.7

21.5
23
25
26.5

16.3
18
19.4
21

65
65
65
65

30
30
30
30

52.5
52
51.6
51.2

114
137
130
184

5
5
5
5

15.70
15.70
15.70
15.70

02 42 00 46
02 42 00 48

15/16

31.5 29
33 31

22.6
24.2

65
65

30 50.7 195
30 50.2 205

5
5

16.50
16.50

'

5100

09 01 00 01
'

extra deep, with rubber insert, HPQ high performance steel,


chrome plated.

'

Code

mm/"

d1
d2
mm mm

L
mm

t1
mm

t2 R
mm g S

02 12 00 36

16-5/8

21.7 19.5

60

15

47.8 88

'

10

15.20

e Spark plug socket

extra deep, with rubber insert, HPQ high performance steel,


chrome plated.

'

Code

mm/"

'

02 13 00 18

18-11/16

'

d1
d2
L
t1
t2 R
mm mm mm mm mm g S
24.2 22

65

18 52.8 132

10

15.40

Assembly of spark plugs on motorcycles, mopeds


'

f UNIFLEX sockets

47

SAE AS 954-E (American sizes), HPQ high performance steel,


chrome plated.

'

'

5 31.80

P Q

Rubber insert

for size 20.8 mm (No 46; 51; 51S).

Code

72.9 198

P Q

02 42 00 16
02 42 00 20
02 42 00 24
02 42 00 28
1

P Q

4606

'

Code

85

f Spark plug socket

4600

'

f Sockets

46a

21.8 25.5 15

'

1
'

d1
d2
d3
L
t1
t2 R
mm mm mm mm mm mm g S

mm/"

R
g

1.25

'

mm

d1
mm

02 04 00 10
02 04 00 11
02 04 00 12
02 04 00 13

10
11
12
13

14.3
15.6
16.9
18.3

17.5
9
17.5 10
17.5 11
17.5 12

45.5
47.5
48
48

7
11
11
12

12
14
14.5
14.5

51
55
54
53

1
1
1
1

33.50
37.00
37.20
36.40

02 04 00 14
02 04 00 15
02 04 00 16
02 04 00 17

14
15
16
17

19.4
20.6
21.8
23

17.5
17.5
17.5
17.5

13
14
15
16

48.5
48.5
51.5
53.5

13
13
14
15

14.5
14.5
17
18.5

55
56
58
63

1
1
1
1

36.10
36.10
40.50
38.70

02 04 00 18
02 04 00 19

18 24.2 17.5 17
19 25.5 17.5 18

54.5
57

16
16

18.5 61
21
68

1
1

40.50
40.50

Code
'

'

114

d2
d3
mm mm

L
mm

t1
t2 R
mm mm g S

f UNIFLEX sockets

47a

h Sockets spline-drive

45aSP

3/8"

'

Code
'

A
"

d1
mm

d2
d3
mm mm

11.7
13.7
15.8
18.3

17.5 7
17.5 8.5
17.5 10
17.5 11.5

45.5
7
45.5
7
47.5 11
47.5 11.5

12.5
12
14
14

50
50
50
57

1
1
1
1

34.20
34.20
34.20
34.20

17.5
17.5
17.5
17.5

48.5
51.5
53.5
57

14.5
17
18.5
21

55
59
58
67

1
1
1
1

34.20
37.20
37.90
37.90

02 44 00 20
02 44 00 24
02 44 00 28
02 44 00 32

5/16
3/8
7/16
1/2

02 44 00 34
02 44 00 36
02 44 00 38
02 44 00 40

9/16 19.7
5/8 21.6
11/16 23.5
3/4 25.5

'

L
mm

13.1
15
16.3
18

t1
t2 R
mm mm g S

13
14
16
16

10

DIN
3120

MS-33787, MIL-W-8982, HPQ high performance steel, chrome plated.

ISO

1174-1

'

p Sockets

45TX

Code
'

Q
for external TORX screws, HPQ high performance steel, chrome plated.

02 01 10 12
02 01 10 14
02 01 10 16

Spline A d1 d2 d3
L
t1
t2 R
size " mm mm mm mm mm mm g
12
14
16

3/8
7/16
1/2

'

13.7 16.5 8.6 26.5 9 15


16 17.3 10.4 28 11 14.5
18 18.3 12.2 28 11.5 14

24
37
28

1
1
1

42.80
42.80
42.80

h Socket spline-drive

45aPSP

Q
MS-33787, MIL-W-8982, for disassembling jet engines, series CFM 56,
HPQ high performance steel, gunmetal finish.

'

Code
'

size

02 27 00 05
02 27 00 06
02 27 00 07
02 27 00 08

E5
E6
E7
E8

02 27 00 10
02 27 00 12
02 27 00 14

E10
E12
E14

'

L
t1 t2 R
C d1 d2 d3
mm mm mm mm mm mm mm g S
4.7
7
5.7
8
6.2
9
7.5 10.5

16.5
16.5
16.5
16.5

2.8
3.6
3.8
4.3

9.4 13 16.5 5.6


11.1 14.9 16.5 7.2
12.9 16.5 17.3 8

28
28
28
28

5
5.5
6.5
7

16.5
16.5
16.5
16.5

23
23
24
22

10
10
10
10

8.80
8.80
8.80
8.80

28 8 16.5 27 10 8.80
28 9.5 16.5 28 10 8.75
28 10 16.5 34 10 9.05

'

Code
'

22 41 00 28

p Set: Sockets

45TX/7

Spline A
size
"
14

'

18.8 18.8 10.4

28

11

14.5

36

10

17.90

h Sockets spline-drive

46aSP

for external TORX screws.


Content:
E5; E6; E7; E8; E10; E12; E14

7/16

d1 d2 d3
L
t1
t2
mm mm mm mm mm mm

Q
extra deep bolt clearance, MS-33787, MIL-W-8982,
HPQ high performance steel, chrome plated.

'

Code
'

96 02 27 02
'

'

219

64.15

Code
'

02 02 10 12
02 02 10 14

in carton packing
'

Spline A d1 d2 d3
L
t1
t2 R
size " mm mm mm mm mm mm g
12
14

3/8
7/16

'

p UNIFLEX sockets

47TX

54 9
54 11

42.5
42.5

52
63

S
1
1

52.50
52.50

f Socket

45aP

for external TORX screws, Chrome Alloy Steel, chrome plated.

13.7 16.5 8.6


16 17.3 10.4

P Q
ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E (test loads),
for disassembling jet engines, series CFM 56,
HPQ high performance steel, gunmetal finish.

'

Code

size

mm

d1
mm

d2
mm

L
mm

R
g

02 07 00 08
02 07 00 10
02 07 00 12
02 07 00 14

E8
E10
E12
E14

7.5
9.4
11.1
12.9

11.5
13.8
16
17.8

19
19
19
19

43
44
46
48

56
61
66
75

1
1
1
1

'

'

30.80
30.80
30.80
30.80

'

Code
'

02 43 00 20
'

A d1
"

5/16

d2
d3
L
t1
t2
mm mm mm mm mm mm

R
g

11.9 16.5 8.1

19

10

25

13.5

7.75
115

Sockets, Socket Sets


i INHEX sockets

49

3/8"

n Screwdriver sockets

49TX

for inside TORX screws, Chrome Alloy Steel, chrome plated.

for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.
10

DIN
3120

ISO

1174-1

'

Code

size

mm

L1
mm

L2
mm

d
mm

R
g

02 10 00 09
02 10 00 10
02 10 00 15
02 10 00 20

T9
T10
T15
T20

2.5
2.7
3.3
3.8

49
49
49
49

17
17
17
17

17.8
17.8
17.8
17.8

45
45
45
46

5
5
5
5

10.40
10.20
10.20
10.20

02 10 00 25
02 10 00 27
02 10 00 30
02 10 00 40

T25
T27
T30
T40

4.4
5
5.5
6.6

49
49
49
49

17
17
17
17

17.8
17.8
17.8
17.8

46
46
47
48

5
5
5
5

10.20
10.20
10.20
10.20

02 10 00 45

T45

7.8

49

17

17.8

49

10.50

'

mm

L1
mm

L2
mm

d
mm

R
g

02 05 00 03
02 05 00 04
02 05 00 05
02 05 00 06

3
4
5
6

52
52
52
52

20
20
20
20

17.8
17.8
17.8
17.8

38
40
44
46

5
5
5
5

8.85
8.35
8.35
8.35

02 05 00 07
02 05 00 08
02 05 00 10

7
8
10

52
52
52

20
20
20

17.8
17.8
17.8

51
55
62

5
5
5

8.35
9.15
9.15

Code
'

'

'

49a

'

INHEX sockets

'

"

L1
mm

L2
mm

d
mm

R
g

02 45 00 08
02 45 00 09
02 45 00 10
02 45 00 12

1/8
9/64
5/32
3/16

52
52
52
52

20
20
20
20

17.8
17.8
17.8
17.8

40
40
40
44

5
5
5
5

10.50
10.70
10.50
10.20

02 45 00 14
02 45 00 16
02 45 00 20
02 45 00 24

7/32
1/4
5/16
3/8

52
52
52
52

20
20
20
20

17.8
17.8
17.8
17.8

46
48
55
61

5
5
5
5

10.50
10.50
11.50
11.90

'

'

n Set: Screwdriver sockets

49TX/8

Code

for inside TORX screws.


Content: T9; T10; T15; T20; T25; T27; T30; T40

i INHEX sockets

2049

'

for socket head screws,


extra long, DIN 7422,
Chrome Alloy Steel, chrome plated.

Code
'

96 02 10 01
'

mm

L1
mm

L2
mm

d
mm

R
g

02 15 10 04
02 15 10 05
02 15 10 06
02 15 12 08

4
5
6
8

100
100
100
120

68
68
68
88

17.8
17.8
17.8
17.8

45
50
57
85

5
5
5
5

10.30
10.30
10.30
10.70

02 15 12 10

10

120

88

17.8

106

11.30

'

'

S
1

86.20

in carton packing

'

Code

456

'

m Screwdriver sockets

49X

for tri-square socket head screws (XZN), DIN 2324,


Chrome Alloy Steel, chrome plated.

i INHEX sockets
for socket head screws,
DIN 7422, special lengths,
Chrome Alloy Steel, chrome plated.

'

Code

size

L1
mm

L2
mm

d
mm

R
g

02 06 00 05
02 06 00 06
02 06 00 08
02 06 00 10

M5
M6
M8
M10

52
52
52
52

20
20
20
20

17.8
17.8
17.8
17.8

45
47
56
63

5
5
5
5

'
'

Code

No

02 15 10 07
02 15 24 08
02 15 10 09

1049/7
3049/8
1049/9 1)

'

'

mm

L1
mm

L2
mm

d
mm

R
g

7
8
9

100
24
57

68 17.8
6.5 19
25 17.8

66
28
62

5
5
5

) For brake calliper retainers on BMW and MINI.

16.00
10.10
9.45

'

'

m Screwdriver sockets

3049X

11.40
11.40
11.40
12.90

for tri-square socket head screws


(XZN), extra long, DIN 2324,
Chrome Alloy Steel, chrome plated.
'

Code

size

L1
mm

L2
mm

d
mm

R
g

02 26 12 08
02 26 12 10

M8
M10

120
120

88
88

17.8
17.8

80
106

5
5

'

'

116

12.70
13.70

440

CROW-RING spanners

440a

'

Caution! Modified settings on torque wrench (refer to note on page 207).


Chrome Alloy Steel, chrome plated.

'

CROW-RING spanners
A

a
"

L
mm

b
mm

01 49 00 24
01 49 00 28
01 49 00 32
01 49 00 34

3/8 )
7/16
1/2
9/16

1/4
1/4
1/4
1/4

28.4
28
30.5
31.7

18.2
18.2
20.6
22.2

02 49 00 36
02 49 00 38
02 49 00 40
02 49 00 42

5/8
11/16
3/4
13/16

3/8

36.5
39.2
40.9
42.9

Code

"

'

Code
'

mm

a
"

L
mm

b
mm

a
S
mm mm

W R
mm g S

47.30
51.50
54.50
54.50

78.50
78.50
85.50
95.50

03 49 00 77 2 5/16
03 49 00 78 2 3/8

1/2
1/2

93.3
95.2

80.9 30
49.2 43.6 309 1 115.00
83
30.5 50.2 46
385 1 119.00

3/8
3/8
3/8
3/8

47.3
49.3
49.3
52.8

35.7
37.7
37.7
40

19.5
20
20
21.4

24.6
25.7
25.7
28.2

18
19
19
20

57
80
63
100

1
1
1
1

45.10
52.00
46.30
53.00

27MB3)
28
30
32

3/8
1/2
1/2
1/2

57.1
56.8
63
62.5

42.1
42.1
48
48

15
22.5
22.5
22.5

29.3
29.3
32.5
32.5

20
21
22
24

92
120
155
137

1
1
1
1

54.50
54.50
56.50
58.50

03 19 00 34
03 19 00 36
03 19 00 38
03 19 00 40

34
36
38
40

1/2
1/2
1/2
1/2

64.2
66.5
68.1
71.8

50
51.9
53.9
57.9

24
24
24
24.5

33.5
34.6
35.6
37.7

27
27
28.6
31

148
150
147
160

1
1
1
1

58.50
60.00
65.00
73.00

03 19 00 41
03 19 00 42
03 19 00 46
03 19 00 50

41
42
46
50

1/2
1/2
1/2
1/2

71.8
71
77.7
83.2

57.9
57.9
64.2
70.5

24.5
24.5
26
27.5

37.7
37.7
40.9
44.1

31
33.2
34.1
39.7

169
189
215
295

1
1
1
1

66.00
73.00
74.50
95.00

) For union nuts on fuel injection leads on 4-cylinder Mercedes-Benz


diesel engines
2
) For use on suction or pressure lines within expansion valve of air
conditioning unit (Mercedes-Benz)
3
) Slim-line version for setting of electronic injection on 440-HP-engines
Mercedes-Benz series OM 442

1
1
1
1

1
1
1
1

'

110
137
130
138

199
229
277
337

46.30
45.10
45.10
51.00

21
23.8
24.6
27

33.2
34.1
39.7
42.8

1
1
1
1

29.3
32.5
32.5
33.5

39.8
40.9
44.1
48.2

54
45
57
71

02 19 10 27
03 19 00 28
03 19 00 30
03 19 00 32

22.5
22.5
22.5
24

25.5
26
27.5
29.5

15.8
16.2
17
17.5

42.1
48
48
50

62
64.2
70.5
78.7

22.5
22.5
23.6
24.6

24 2)
25
26
27

46.20
47.30
47.30
47.30

75.6
77.7
83.2
91.2

18.5
18.5
19
19.5

02 19 00 24
02 19 00 25
02 19 00 26
02 19 00 27

1
1
1
1

03 49 00 68
03 49 00 69
03 49 00 72 2
03 49 00 76 2 1/4

31.3
31.3
33.5
35.7

62
63
71
84

1/2
1/2
1/2
1/2

42.9
42.8
45.3
47.5

3/8
3/8
3/8
3/8

17.5
18.3
19
20

1 3/4
1 13/16

20
21
22 2)
23

23.6
24.6
25.7
28.2

59.00
59.00
68.00
68.00

44.30
44.30
44.30
43.40

02 19 00 20
02 19 00 21
02 19 00 22
02 19 00 23

19
19.5
20
21.4

1
1
1
1

1
1
1
1

3/8

33.5
35.7
37.7
40

143
152
172
169

27
40
45
40

45.2
47.2
49.3
52.8

27
28.6
29.4
31

13
14
14.8
15.8

36.1
39.2
40.8
40.5

46.60
46.60
46.60
46.60

34.6
35.6
36.7
37.7

19.1
20.5
21.3
21.3

3/8
3/8
3/8

1
1
1
1

24
24
24
24.5

17.5
17.5
18.5
18.5

16
17 2)
18
19 2)

33
36
44
51

51.9
53.9
55.9
57.9

24.6
27.3
29
29

02 19 00 16
02 19 00 17
02 19 00 18
02 19 00 19

11.9
14
14.2
15.8

66.5
68.1
70.1
71.8

19.1
20.5
21.3
22.5

1/2
1/2
1/2
1/2

35.50
34.60
34.60
49.90

20.6
22.2
22.2
24.6

17.5
17.5
18.5
18.5

1/2

1
1
1
1

30.8
32
31.7
36.5

24.6
27.3
29
31.3

1 7/16
1 1/2
1 9/16
1 5/8

20
20
20
34

1/4
1/4
1/4
3/8

37.00
37.00
37.00
37.00

03 49 00 62
03 49 00 64
03 49 00 65
03 49 00 66

15.7 9
16.4 10
16.4 11.1
19.1 11.9

12 1)
13
14 1)
15

1
1
1
1

56.8
62.5
62.3
64.2

14
14
14
17.5

01 19 00 12
01 19 00 13
01 19 00 14
02 19 00 15

14
14
19
23

1/2
1/2
1/2

38.90
39.70
34.60
38.90

12.7
8
12.3
18.2 13.5 14
18.2 13.5 14
18.2 13.5 14

14
7.1
14
8.6
15.7 10
16.4 11.1

10

1 1/8
1 1/4
1 5/16
1 3/8

1
1
1
1

23.8
28.5
28.4
28

13.5
13.5
14
14

g S

03 49 00 52
03 49 00 56
03 49 00 58
03 49 00 60

11
21
16
17

1/4
1/4
1/4
1/4

3/8
3/8

6.3
6.7
7.1
8.6

18
19
10 1)
11

3/8
3/8
3/8

W
mm

02 49 00 44 7/8
02 49 00 46 15/16
02 49 00 48 1
02 49 00 50 1 1/16
1

01 19 00 08
01 19 00 09
01 19 00 10
01 19 00 11

a
S
mm mm

3/8"

'

3/8
3/8

) For Volvo aero-engines, types "JAS"

1
'

440S MJ

CROW-RING spanners

Q
Supersedes No 440 MJ
Caution! Modified settings on torque wrench
(refer to note on page 207), EN 4108,
for pipe unions with straight cylindrical involute toothing,
HPQ high performance steel, chrome plated.

'

'

Code
'

Threaded G
nut
mm

a
"

L
mm

b
mm

a
mm

01 21 10 10
01 21 10 14
02 21 10 16
02 21 10 18

MJ10
MJ14
MJ16
MJ18

DN04
DN06
DN08
DN10

1/4
1/4
3/8
3/8

31.9
36.5
43.8
45.2

22
27
31
33

8
8
8
8

02 21 10 20
02 21 10 22
02 21 10 24
02 21 10 27

MJ20
MJ22
MJ24
MJ27

DN12
DN14
DN16
DN18

3/8
3/8
3/8
3/8

46.2
48.4
49.5
54.4

35
37
39
44

02 21 10 30 MJ30 DN20

3/8

60.8

50

'

S
mm

W R
mm g S

17
6.5
19.5 8.5
24 10.5
25 13

25
30
50
45

1
1
1
1

180.00
199.00
203.00
206.00

8
9
9
10

26
27
28
31

15
17.5
19.7
21.5

50
55
60
75

1
1
1
1

211.00
215.00
217.00
221.00

10

36

23.7

95 1

226.00

117

DIN
3120

ISO

1174-1

Sockets, Socket Sets


540

3/8"
10

CROW-FOOT spanners

540a HD

Caution! Modified settings on torque wrench (refer to note on page 207),


Chrome Alloy Steel, chrome plated.

DIN
3120

ISO

CROW-FOOT spanners Heavy Duty

For particularly high loadings, e.g. stainless steel screw fittings.


Full use of jaws in conjunction with standard ratchets.
Caution! Modified settings on torque wrench (refer to note on page 207),
chrome plated.
Supplied without ratchet.

1174-1

'

Code
'

mm

L
mm

b
mm

a
mm

S
mm

R
g

01 20 00 08
01 20 00 09
01 20 00 10
02 20 00 11

8
9
10
11

1/4
1/4
1/4
3/8

25.5
25.5
25.5
32

19.8
19.8
19.8
22.2

6.3
6.3
6.3
6.3

14.6
14.6
14.6
17.4

21
21
20
36

1
1
1
1

28.20
28.20
28.20
29.60

02 20 00 12
02 20 00 13
02 20 00 14
02 20 00 15

12
13
14
15

3/8
3/8
3/8
3/8

34.3
34.3
37.7
37.7

25.4
25.4
30
30

6.3
6.3
6.3
6.3

18.2
17.8
20.8
20.4

37
36
46
45

1
1
1
1

27.50
27.50
25.50
32.70

02 20 00 16
02 20 00 17
02 20 00 18
02 20 00 19

16
17
18
19

3/8
3/8
3/8
3/8

37.7
42.5
42.5
42.5

30
38
38
38

6.3
6.3
6.3
6.3

19.9
23.8
22.9
22.4

45
62
61
64

1
1
1
1

33.30
30.80
36.20
30.80

02 20 00 20
02 20 00 21
02 20 00 22
02 20 00 23

20
21
22
23

3/8
3/8
3/8
3/8

42.4
44.5
44.5
44.5

38
41
41
41

6.3
6.3
6.3
6.3

25
23.6
24.2
25.8

55
59
64
63

1
1
1
1

41.60
41.60
41.60
44.80

02 20 00 24
02 20 00 25
02 20 00 26
02 20 00 27

24
25
26
27

3/8
3/8
3/8
3/8

44.4
47
47
47

41
45
45
45

6.3
8
8
8

26.2
26.4
27.6
27.6

60
75
80
76

1
1
1
1

42.50
44.80
43.10
42.10

02 20 00 28
02 20 00 30
02 20 00 32
02 20 00 34

28
30
32
34

3/8
3/8
3/8
3/8

50
50
53
54.5

50
50
57
60

8
8
8
8

29.3
29.3
30.5
31.6

78
84
95
107

1
1
1
1

45.60
42.10
42.10
45.90

02 20 00 36
02 20 00 40
02 20 00 41
02 20 00 42

36
40
41
42

3/8
3/8
3/8
3/8

56.5
63
63
63

62
70
70
70

8
8
8
8

32.8
37.6
37.2
37.7

100
130
130
125

1
1
1
1

52.00
64.50
75.00
75.00

02 20 00 46
02 20 00 50

46
50

3/8
3/8

72
75

82
88

8
8

43.1
45.4

191
217

1
1

89.00
89.00

"

A a

'

540a

CROW-FOOT spanners

'

a
"

L
mm

b
mm

a
mm

S
mm

R
g

02 50 10 34
02 50 10 36
02 50 10 38
02 50 10 42

9/16
5/8
11/16
13/16

3/8
3/8
3/8
3/8

43.4
45
47.2
51

32
34.8
38
46.4

11
11
11
11

26.8
27.7
28.6
30.5

72
79
87
114

1
1
1
1

36.20
42.80
43.30
45.60

02 50 10 44
02 50 10 46
02 50 10 48
02 50 10 50

7/8
15/16

3/8

1
1 1/16

3/8
3/8
3/8

52
54
56
57

48
51.2
53.4
53.8

11
11
11
11

31.3
32.3
33.2
34.1

118
130
137
136

1
1
1
1

54.50
54.50
54.50
54.50

02 50 10 52
02 50 10 56
02 50 10 62
03 50 10 64

1 1/8
1 1/4
1 7/16
1 1/2

3/8
3/8
3/8
1/2

59
62
66.5
76

53.8
60
66
70

11
11
11
16

35
36.8
39.6
45

140
168
192
358

1
1
1
1

54.50
55.50
68.50
69.00

03 50 10 69
03 50 10 72
03 50 10 74
03 50 10 75

1 13/16
2
2 1/8
2 3/16

1/2
1/2
1/2
1/2

85
89
91.5
93

84
90
92.8
96

16
16
16
16

49.6
52.3
54.2
55.1

470
505
523
545

1
71.50
1 113.00
1 138.00
1 146.00

03 50 10 76

2 1/4

1/2

95

99

16

56

568

1 147.00

Code
'

"

'

f Adaptor

447

P Q
Caution! Modified settings on torque wrench (refer to note on page 207),
American sizes: SAE AS 954-E, HPQ high performance steel, gunmetal
finish.

'

a
"

L
mm

b
mm

a
mm

S
mm

R
g

01 50 00 24
02 50 00 28
02 50 00 32
02 50 00 34

3/8
7/16
1/2
9/16

1/4
3/8
3/8
3/8

25.5
32
34.3
37.7

19.8
22.2
25.4
30

6.3
6.3
6.3
6.3

14.6
17.2
18.1
20.9

17
34
37
40

1
1
1
1

27.90
29.20
28.60
28.60

02 50 00 36
02 50 00 38
02 50 00 40
02 50 00 42

5/8
11/16
3/4
13/16

3/8
3/8
3/8
3/8

37.7
42.5
42.5
42.3

30
38
38
38

6.3
6.3
6.3
6.3

20.4
24.1
24
24

44
62
66
59

1
1
1
1

34.10
34.10
34.10
37.10

Code
'

"

'

Code

mm

d1
mm

d2
mm

h1
mm

h2
mm

S
mm

R
g

02 18 10 07
02 18 10 08
02 18 10 09
02 18 10 10

7
8
9
10

11.5
12.4
14
15.6

19
19
19
19

6
6
8
8

11
11
11
11

50.8
50.8
50.8
50.8

30
30
40
40

1
1
1
1

27.30
27.30
28.00
28.00

02 18 10 13

13

19.3

19

9.2

11

50.8

55

29.60

02 50 00 44 7/8
02 50 00 48 1
02 50 00 50 1 1/16
02 50 00 52 1 1/8

3/8
3/8
3/8
3/8

44.5
47
47
50

41
45
45
50

6.3
8
8
8

25.8
26.7
27.2
28.5

65
78
78
84

1
1
1
1

43.10
43.10
43.10
41.60

'

02 50 00 54
02 50 00 56
02 50 00 58
02 50 00 60

1 3/16
1 1/4
1 5/16
1 3/8

3/8
3/8
3/8
3/8

50
53
53
54.5

50
57
57
60

8
8
8
8

29.2 83
30.3 101
31.2 101
32.3 105

1
1
1
1

43.10
43.10
44.20
43.10

02 50 00 62
02 50 00 64
02 50 00 65
02 50 00 66

1 7/16
1 1/2
1 9/16
1 5/8

3/8
3/8
3/8
3/8

56.5
58
59.5
63

62
65
68
70

8
8
8
8

33.1
34.5
35.7
37.3

107
118
126
140

1
1
1
1

53.50
53.50
55.00
71.50

02 50 00 67
02 50 00 68
02 50 00 70
02 50 00 72

1 11/16
1 3/4
1 7/8
2

3/8
3/8
3/8
3/8

63
68
72
75

70
76
82
88

8
8
8
8

37.7
40.4
42
44.8

126
161
205
214

1
1
1
1

75.50
79.50
82.50
85.00

3/8
3/8
1/2

75.6
80.5
81.5

91
96
96

10
10
8

02 50 00 74 2 1/8
02 50 00 76 2 1/4
03 50 00 78 2 3/8
'

118

46
265
49.5 297
51.3 214

1 110.00
1 113.00
1 118.00

'

f Adaptor

447a
'

Code

d2
mm

h1
mm

h2
mm

S
mm

R
g

1/4
5/16
3/8
7/16

10.4
12.4
14.9
17

19
19
19
19

6
6
8
8

11
11
11
11

50.8
50.8
50.8
50.8

27
29
41
40

1
1
1
1

27.40
27.20
27.20
27.50

02 47 00 32
02 47 00 34
02 47 00 36

1/2
9/16
5/8

19
21
23

19
19
19

9.2
9.2
12

11
11
11

50.8
50.8
50.8

56
61
73

1
1
1

27.50
29.60
29.60

'

"

d1
mm

02 47 00 16
02 47 00 20
02 47 00 24
02 47 00 28

'

Drive tools and accessories

h Spline-Drive adaptor

447aSP

3/8"

3/8"

u, finish: Chrome Alloy Steel, chrome plated.

10

DIN

Caution! Modified settings on torque wrench (refer to note on page 207),


MS-33787, MIL-W-8982, HPQ high performance steel, gunmetal finish.

3120

ISO

1174-1

422

Ratchet

fine tooth, reversible, 60 teeth,


with 2-component handle,
for use in confined spaces,
re-engages after movement of 6, DIN 3122/ISO 3315.
'
'

Code
'

Spline A
size
"

d1 d2
h1 h2
S
R
mm mm mm mm mm g

02 48 00 14 7
02 48 00 16 8
02 48 00 18 9
02 48 00 20 10

7/32
1/4
9/32
5/16

02 48 00 24
02 48 00 28
02 48 00 32
02 48 00 34

3/8
7/16
1/2
9/16

14.9
17
19
21

19
19
19
19

5/8

23

19 12

12
14
16
18

9.4
10.4
11.5
12.4

19
19
19
19

6
6
6
6
8
9.2
9.2
9.2

11
11
11
11
11
11
11
11

50.8
50.8
50.8
50.8

27
27
29
29

S
1
1
1
1

Code

L
mm

b
mm

a
mm

R
g

12 23 10 11

194

32

24

236

'

38.90
38.90
38.90
38.90

50.8
50.8
50.8
50.8

40
50
59
55

1
1
1
1

38.90
39.90
41.10
41.10

11 50.8

74

42.20

'

435

43.40

Ratchet

reversible, 30 teeth,
with 2-component handle,
DIN 3122/ISO 3315.
'

02 48 00 36 20
'

Code

L
mm

b
mm

a
mm

R
g

12 11 10 10

193

29

18

245

'

45CL

Clip strips

'

for socket retention, with 9 or 10 retaining clips.


Supplied without sockets.

435QR N

52.50

QuickRelease ratchet, fine tooth

reversible, 80 teeth,
with QuickRelease safety lock and 2-component handle,
for use in confined spaces, re-engages after movement of 4.5,
DIN 3122/ISO 3315.
'

'

Code

size

L
mm

80 45 00 01
80 45 00 02

1
2

200
300

'

'

R
g

40
58

5
5

Code

L
mm

b
mm

a
mm

R
g

12 11 10 20

193

30

15

220

'

'

5.90
5.90

59.50

available from June 2014


'

435QR*

QuickRelease ratchet

reversible, 30 teeth,
with QuickRelease safety lock and 2-component handle,
DIN 3122/ISO 3315.
'

Code

L
mm

b
mm

a
mm

R
g

12 11 00 20

193

29

18

244

'

'

56.00

* to be discontinued
'

435SG-QR

QuickRelease ratchet

reversible, 30 teeth,
with QuickRelease safety lock and steel handle, DIN 3122/ISO 3315.
'

Code

L
mm

b
mm

a
mm

R
g

12 11 00 30

193

29

18

275

'

'

59.50

119

Sockets, Socket Sets


445

3/8"

Ratchet adaptor

421

reversible, 20 teeth.

Speeder brace

working radius 85 mm,


DIN 3122/ISO 3315.

10

DIN
3120

'

'

ISO

1174-1

Code
'

12 14 00 00
'

L
mm

mm

53

450*

R
g

30

Code

135

'

112.00

453

Code

L
mm

b
mm

a
mm

R
g

12 15 00 01

196

30

16

249

42.40

* to be discontinued
'

Code

L
mm

R
g

12 10 00 02

408

619

424

Code

a
mm

R
g

12 26 00 01

300

34

24

505

'

12 06 10 10
'

425
Content:
1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws.

'

R
g

253.5

222

39.50

Sliding T-handle

DIN 3122/ISO 3315.

'

'

59 25 10 05

L
mm

72.00

Spare parts set for ratchets No 422, 452

Code

71.50

Flexible handle

Code

b
mm

'

30.90

'

L
mm

7350/5

DIN 3122/ISO 3315,


with 2-component handle.

'

'

385

'

'

Flexible joint ratchet

reversible, 60 teeth, handle may be


raised or lowered by approx. 90.
Lockable in following positions:
straight, 30 up, 60 up, 30 down.
Unlocked by depressing button in handle, registered design.

'

386.5

Speeder brace

'

452

with steel handle,


for greater axial power
transmission, detachable palm
head, working radius 85 mm,
DIN 3122/ISO 3315.

'

'

'

RATCHFIX ratchet

reversing lever near handle,


30 teeth, DIN 3122/ISO 3315.

'

12 10 00 10

L
mm

Code

L
mm

R
g

12 07 00 00

165

133

'

85

'

13.50

27.80

425QR

for ratchets from 12/97


'

QuickRelease sliding T-handle

4350

Spare parts set for ratchets


No 435, 435SG, 438, 439

patent, with QuickRelease safety


lock.

Content:
1 pinion; 1 pawl; 1 lever with pin; 1 ball;
2 compression springs; 2 screws

'

Code

L
mm

R
g

12 07 10 00

165

148

'

'

'

Code
'

19 02 00 00
'

50

26.20

for ratchets from 1992

427

15.40

Extensions

DIN 3123/ISO 3316.

'

4350QR

Spare parts set for ratchets


No 435QR, 435SG-QR
'

'

Code
'

19 02 00 20
'

120

51

size

L
mm

d
mm

R
g

12 01 00 05
12 01 00 01
12 01 00 06
12 01 00 02

1.5
3
5
6

38
76
125
160

17
17
17
17

36
67
104
127

5
5
5
5

10.10
10.40
11.00
11.70

240
455

17
17

188
345

5
5

13.20
36.70

'

Content:
1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs;
2 screws

Code

12 01 00 03 10
12 01 00 04 18

S
1

29.30

'

427W

Extensions with wobble-drive

13220

swivel angle 15 each side, max. torque 80 N m.

Special extension

3/8"

for removing Boroscope


plugs, with Boroscope plug locking,
external hexagon size 16 mm.

10

DIN
3120

'

ISO

Code

L
mm

R
g

12 27 00 20

355

362

'

'

1174-1

179.00

'

Code
'

12 01 00 07
12 01 00 08
12 01 00 09

size

L
mm

d
mm

R
g

3
5
6

76
125
160

17
17
17

67
104
127

5
5
5

'

427QR

428
12.80
14.50
15.30

QuickRelease extensions

Universal joint

DIN 3123/ISO 3316.

'

Code

L
mm

d
mm

R
g

12 02 00 00

46

18.8

55

'

'

patent, DIN 3123/ISO 3316.

428QR

24.20

QuickRelease universal joint

patent, DIN 3123/ISO 3316, with QuickRelease safety lock.

'

'

Code
'

12 01 10 01
12 01 10 02
12 01 10 03

L
mm

size
3
6
10

76
160
240

'

433/1

d
mm
17
17
17

R
g

66
127
185

S
1
1
1

12.00
13.60
15.10

12 02 10 00

60

19

66

'

431

Adaptor

d
mm
18

R
g

57

'

S
1

33.95

Code

L
mm

d
mm

R
g

12 03 00 01

28

17.2

26

'

'

434

28.70

socket x 1/4" plug (10 x 6.3 mm),


maximum torque 62 N m, DIN 3123/ISO 3316,
HPQ high performance steel.

52

'

3/8"

L
mm

96 12 27 01

d
mm

Locking adaptor

'

'

L
mm

'

with hexagon key wrench


No 10760aCV 1/8".

Code

Code

Extension, flexible

432

(right hand rotation only),


maximum torque 7 N m.

9.30

Adaptor

Q
3/8"

socket x 1/2" plug (10 x 12.5 mm),


DIN 3123/ISO 3316, HPQ high performance steel.

'

Code

L
mm

d
mm

R
g

12 04 00 00

194

17

109

'

'

25.20

'

Code

L
mm

d
mm

R
g

12 03 00 03

31

17.2

36

'

1225

Special extension

'

9.25

409M/432M/ Set adaptors, 3 pieces


514M/3
1/4"

socket x 3/8" plug,


socket x 1/2" plug,
1/2" socket x 3/4" plug.

'

3/8"

Code

L
mm

d
mm

R
g

12 25 00 01

150

17

128

'

'

19.70

'

Code
'

96 12 10 02
'

R
g

120

56.90
121

Sockets, Socket Sets


432M

3/8"

Adaptor

45/14/5i

3/8"
10

socket x 1/2" plug


(10 x 12.5 mm).

DIN
3120

ISO

1174-1

'

Code

L
mm

mm

R
g

12 03 00 10

16

32

22

'

'

442

18.30

Bit holder

Socket set 3/8" u

in sturdy sheet steel case,


19 pieces
Content:
14 sockets with bi-hexagon No 45:
sizes 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22 mm
1 ratchet No 435
2 extensions No 427/3 (76 mm),
No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428
'

1/4"

inside hexagon, DIN 3126/ISO 1173 D 6.3.


c
Internal hex drive with a collar-thrust spring.
Bits are easy to insert, lock securely in position and can
be removed just as easily; even hex. bits with a wide
groove (Type E, DIN 3126/ISO 1173).

456/14/5i

L
mm

d
mm

R
g

12 18 00 26

32

16.5

30

443

1866

'

Code
'

96 02 01 32

'

'

Code
'

18.00

Bit holder

c 5/16" inside hexagon, DIN 3126/ISO 1173 D 8.

Internal hex drive with a collar-thrust spring.


Bits are easy to insert, lock securely in position and can
be removed just as easily; even hex. bits with a wide
groove (Type E, DIN 3126/ISO 1173).

227.70

Socket set 3/8" u

in sturdy sheet steel case,


19 pieces
Content:
14 sockets with hexagon No 456:
sizes 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22 mm
1 ratchet No 435
2 extensions No 427/3 (76 mm),
No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428
'

'

Code

L
mm

d
mm

R
g

12 18 00 30

32

16.5

39

'

'

45/11/4

Code
19.00

96 02 11 32

1866

'

45/14/5iQR

Socket set 3/8" u

Socket set 3/8" u

in a sturdy ABS plastic case,


19 pieces
Content:
14 sockets with bi-hexagon No 45:
sizes 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22 mm
1 ratchet No 435QR
2 extensions No 427QR/3 (76 mm), No 427QR/10 (240 mm)
1 T-handle No 425QR
1 universal joint No 428QR

'

'

'

96 02 01 09

1602

'

192.35

Code

'

96 02 01 80

1650

'

456/11/4

Socket set 3/8" u

45/13/5

in sturdy sheet steel case,


15 pieces
Content:
11 sockets with hexagon No 456:
sizes 8; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19 mm
1 ratchet No 435
2 extensions No 427/3 (76 mm),
No 427/10 (240 mm)
1 universal joint No 428
'

Code
'

96 02 11 33
'

230.25

in sturdy sheet steel case,


15 pieces
Content:
11 sockets with bi-hexagon No 45:
sizes 8; 10; 11; 12; 13; 14; 15; 16;
17; 18; 19 mm
1 ratchet No 435
2 extensions No 427/3 (76 mm),
No 427/10 (240 mm)
1 universal joint No 428

Code

'

R
g

1780

194.00

239.40

Socket set 3/8" u

in sturdy sheet steel case,


18 pieces
Content:
12 sockets with bi-hexagon No 45:
sizes 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19 mm
1 socket with bi-hexagon, long,
with rubber insert, No 4600:
size 16 mm - 5/8"
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428
'

Code
'

96 02 02 34
'

122

R
g

1939

227.30

456/13/5

Socket set 3/8" u

456/49/19/5 Socket set 3/8" u

3/8"

in sturdy sheet steel case,


24 pieces
Content:
11 sockets with hexagon No 456:
sizes 8; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19 mm
1 socket with bi-hexagon, long,
with rubber insert No 4600:
size 16 mm - 5/8"
7 INHEX sockets No 49: sizes 3; 4; 5; 6; 7; 8; 10 mm
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428

in sturdy sheet steel case,


18 pieces
Content:
12 sockets with hexagon No 456:
sizes 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19 mm
1 socket with bi-hexagon, long,
with rubber insert, No 4600:
size 16 mm - 5/8"
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428

10

DIN
3120

ISO

1174-1

'

Code

'

'

96 02 02 02

1970

'

229.00

Code

'

96 02 02 36

2749

'

45ma/28/5

Socket set 3/8" u

89N

in sturdy sheet steel case,


33 pieces
Content:
28 sockets with bi-hexagon
No 45: sizes 7; 8; 9; 10; 11; 12;
13; 14; 15; 16; 17; 18;
19; 20; 21; 22 mm
No 45a: sizes 1/4; 5/16; 11/32; 3/8;
7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8"
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428
'

Code

'

96 02 01 22

3040

'

45/49/19/5

342.40

Socket set 3/8" u

295.55

Socket set 3/8" u

in sturdy sheet steel case,


44 pieces
Content:
15 sockets with bi-hexagon No 45:
sizes 7; 8; 9; 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 21; 22 mm
2 sockets with bi-hexagon, long,
with rubber insert,
No 4600: size 16 mm - 5/8",
No 46: size 20.8 mm - 13/16"
7 INHEX sockets No 49:
sizes 3; 4; 5; 6; 7; 8; 10 mm
15 combination spanners No 13:
sizes 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428
'

in sturdy sheet steel case,


24 pieces
Content:
11 sockets with bi-hexagon
No 45: sizes 8; 10; 11; 12; 13; 14;
15; 16; 17; 18; 19 mm
1 socket with bi-hexagon, long,
with rubber insert
No 4600: size 16 mm - 5/8"
7 INHEX sockets No 49: sizes 3; 4; 5; 6; 7; 8; 10 mm
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428

Code
'

96 02 01 28
'

R
g

5225

518.30

STAHLWILLE AS-Drive

'

Code
'

96 02 02 23
'

R
g

2675

293.90

STAHLWILLE sockets are equipped with the AS-Drive*


profile: this permits high transmission of forces to the
lands of nuts and bolts without damaging them.
No longer will you have to worry about stripping the
corners off nuts and bolts.
*Anti-Slip-Drive

123

Sockets, Socket Sets


40/45/36/12 Socket set 1/4"; 3/8" u

3/8"
10

DIN
3120

ISO

1174-1

in sturdy sheet steel case,


48 pieces
Content:
8 sockets with hexagon No 40:
sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9 mm
12 sockets with bi-hexagon No 45:
sizes 10; 11; 12; 13; 14; 15; 16;
17; 18; 19; 21; 22 mm
1 socket with bi-hexagon, long, with rubber insert No 4600:
size 16 mm - 5/8"
3 bits k 1221: size 1; 1222: size 2; 1223: size 3
1 bit l PZ1222: size 2
6 bits r 1160: 0.5 x 3 mm; 1162: 0.6 x 3.5 mm; 1164: 0.8 x 4 mm;
1166: 1 x 5.5 mm; 1166/1: 1.2 x 6.5 mm; 1168: 1.6 x 8 mm
5 bits i 1300: 3 mm; 1301: 4 mm; 1302: 5 mm; 1303: 6 mm;
1304: 8 mm
2 ratchets No 415, No 435
3 extensions No 427/3 (76 mm), No 405/6 (150 mm),
No 427/10 (240 mm)
2 universal joints No 407, No 428
1 drive handle No 400
1 T-handle No 425
2 bit-holder No 412, No 442
1 adaptor No 431

'

Code

'

96 01 10 47

3005

'

45/41/9

438.75

Socket set 3/8" u

in sturdy sheet steel case,


50 pieces
Content:
11 sockets with bi-hexagon No 45:
sizes 8; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19 mm
9 sockets with bi-hexagon, long,
No 46: sizes 10; 11; 12; 13; 14;
15; 17; 18; 19 mm
2 sockets with bi-hexagon, long,
with rubber insert No 4600:
size 16 mm - 5/8"; No 46: size 20.8 mm - 13/16"
10 UNIFLEX sockets with bi-hexagon No 47:
sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19 mm
5 INHEX sockets No 49: size 4; 5; 6; 8; 10 mm
4 bits k 1231: size 1; 1232: size 2; 1233: size 3; 1234: size 4
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 flexible handle No 424
1 T-handle No 425
1 universal joint No 428
1 flexible extension No 434
1 bit-holder No 443
Code
96 02 01 08
'

in sturdy sheet steel case,


20 pieces
Content:
7 sockets for external TORX
screws No 45TX:
sizes E5; E6; E7; E8; E10; E12; E14
8 screwdriver sockets for internal
TORX screws No 49TX: sizes T9;
T10; T15; T20; T25; T27; T30; T40
1 ratchet No 435
2 extensions No 427/5 (125 mm), No 427/10 (240 mm)
1 universal joint No 428
1 T-handle No 425
'

Code

'

96 02 27 03

2005

'

89TX

289.85

Socket set TORX 1/4; 3/8; 1/2" u

in sturdy sheet steel case,


35 pieces
Content:
3 sockets for external TORX screws
No 40TX: sizes E4; E5; E6
2 screwdriver sockets for internal
TORX screws No 44KTX:
sizes T8; T9
4 sockets for external TORX screws No 45TX:
sizes E7; E8; E10; E12
5 screwdriver sockets for internal TORX screws No 49TX:
sizes T10; T15; T20; T25; T27
6 sockets for external TORX screws No 50TX:
sizes E11; E14; E16; E18; E20; E24
6 screwdriver sockets for internal TORX screws No 54TX:
sizes T30; T40; T45; T50; T55; T60
7 bits o 1440: T10; 1441: T15; 1442: T20; 1443: T25; 1444: T27;
1445: T30; 1446: T40
1 bit-holder No 442
1 TORX controller: sizes E6; E7; E8; E10; E12; E14; E16; T10; T15; T20;
T25; T27; T30; T40; T45; T47; T50; T55; T60

Code

'

98 81 09 08

2765

'

45/49/32/
5TX

R
g

6521

Socket set TORX 3/8" u

'

'

'

45TX/49TX/
15/5

957.40

364.00

Socket set 3/8" u

in sturdy sheet steel case,


37 pieces
Content:
11 sockets with bi-hexagon No 45:
sizes 8; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19 mm
7 sockets for external TORX
screws No 45TX:
sizes E5; E6; E7; E8; E10; E12; E14
6 INHEX sockets No 49: sizes 4; 5; 6; 7; 8; 10 mm
8 screwdriver sockets for internal TORX screws No 49TX:
sizes T9; T10; T15; T20; T25; T27; T30; T40
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428
'

Code
'

96 02 01 19
'

124

R
g

3120

413.55

45a/12/5

Socket set 3/8" u

45a/22/8QR

in sturdy sheet steel case,


17 pieces
Content:
11 sockets with bi-hexagon No 45a:
sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2;
9/16; 5/8; 11/16; 3/4; 13/16"
1 socket with bi-hexagon, long,
with rubber insert No 4600: size 16 mm - 5/8",
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428

10

96 02 42 04

1914

'

DIN

in sturdy sheet steel case,


30 pieces
Content:
14 sockets with bi-hexagon No 45a:
sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2;
9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1"
8 UNIFLEX sockets with bi-hexagon No 47a:
sizes 5/16; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4''
1 ratchet No 435SG-QR
3 extensions No 427/3QR (76 mm), No 427/6QR (160 mm),
No 427/10QR (240 mm)
1 universal joint No 428QR
2 bit-holders No 442, No 443
1 speeder brace No 453

'

3/8"

'

Code

Socket set 3/8" u

3120

ISO

1174-1

228.95
'

45ma/28/5

96 02 42 07

45a/33/13

R
g

96 02 01 22

3040

'

45a/14/8QR

3947

'

'

'

'

in sturdy sheet steel case,


33 pieces
Content:
28 sockets with bi-hexagon
No 45: sizes 7; 8; 9; 10; 11;
12; 13; 14;15; 16; 17;
18; 19; 20; 21; 22 mm
No 45a: sizes 1/4; 5/16; 11/32; 3/8;
7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8"
1 ratchet No 435
2 extensions No 427/3 (76 mm), No 427/10 (240 mm)
1 T-handle No 425
1 universal joint No 428

Code

Code

Socket set 3/8" u

342.40

Socket set 3/8" u

in sturdy sheet steel case,


22 pieces
Content:
14 sockets with bi-hexagon No 45a:
sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2;
9/16; 5/8; 11/16; 3/4; 13/16; 7/8; 15/16; 1"
1 ratchet No 435SG-QR
3 extensions No 427/3QR (76 mm), No 427/6QR (160 mm),
No 427/10QR (240 mm)
1 universal joint No 428QR
2 bit-holders No 442, No 443
1 speeder brace No 453

673.25

Socket set 3/8" u

in sturdy sheet steel case,


46 pieces
Content:
10 sockets with bi-hexagon No 45a:
sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2;
9/16; 5/8; 11/16; 3/4"
2 sockets with bi-hexagon, long,
with rubber insert,
No 4600: size 16 mm - 5/8",
No 46: size 20.8 mm - 13/16"
7 sockets with bi-hexagon, long,
No 46a: sizes 3/8; 7/16; 1/2; 9/16; 11/16; 3/4; 7/8"
7 UNIFLEX sockets with bi-hexagon No 47a:
sizes 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4"
3 INHEX sockets No 49a: sizes 1/8; 5/32; 3/16"
4 bits k 1231: size 1; 1232: size 2; 1233: size 3; 1234: size 4
2 ratchets No 415, No 435
1 ratchet adaptor No 445
3 extensions No 427/3 (76 mm), No 427/6 (160 mm),
No 427/10 (240 mm)
1 flexible extension No 434 (194 mm)
1 adaptor No 409
1 speeder brace No 421
1 flexible handle No 424
1 T-handle No 425
1 universal joint No 428
1 bit-holder No 443
'

Code
'

96 02 41 13
'

R
g

6540

964.50

'

Code
'

96 02 42 06
'

R
g

3637

389.25

125

Sockets, Socket Sets


ES 456/16/6

3/8"

TCS 456/31/8

10

DIN
3120

ISO

1174-1

175 x 350 x 40 mm, 22 pieces


'

Code

'

96 83 81 11

1555

'

No 456

a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

'

3/8"

No 425
'

No 427/6

3/8"

D a 160 mm

No 427/10

3/8"

D a 240 mm

'

No 428

3/8"

D a 46 mm

'

'

'

3/8"

No 435
'

Empty tray

Code

'

D a 76 mm

'

'

'

3/8"

'

83 81 20 32

D 165 mm

350 x 350 x 32 mm, 39 pieces

No 427/3
'

244.70

3/8"

96 83 06 02

2701

'

103

8.65

a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

No 46

3/8"

a sizes 10; 11; 12; 13 mm

No 47

3/8"

a sizes 10; 11; 12; 13; 14; 15; 16 mm

No 1049

3/8"

a size 9 mm

No 49X

3/8"

a sizes M6; M8; M10

No 427/3

3/8"

D a 76 mm

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

D 3/8" a

No 435

3/8"

No 452

3/8"

'

'

TCS 456/16/7

'

'

'

'

'

175 x 350 x 40 mm, 23 pieces

'

'

Code

'

'

96 83 02 18

1400

'

264.30

No 456

3/8" a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

No 427/3

3/8"

D a 76 mm

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

3/8"

'

'

'

'

'

'

'

'

TCS 49/1049/2049/45TX/49TX

175 x 350 x 40 mm, 24 pieces


'

Code

'

3/8"

No 435
'

96 83 87 72

'

Code

96 83 03 57

1123

'

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 435

3/8"

'

126

236.05

a sizes 7; 8; 9; 10; 11; 12; 13; 14;

No 427/5
'

'

3/8"

15; 16; 17; 18; 19; 20; 21; 22 mm

'

a sizes 4; 5; 6; 7; 8; 10 mm

No 1049
No 2049

3/8''
3/8''

a size 7 mm
a sizes 4; 5; 6; 8; 10 mm

No 45TX

3/8''

a sizes E5; E6; E7; E8; E10; E12

No 49TX

3/8''

a sizes T10; T15; T20; T25; T30;

'

'

'

No 49

'

175 x 350 x 45 mm, 20 pieces

258.45

3/8"

'

No 456

1200

'

TCS 456/16/4 MF

'

696.25

3/8"

No 456

T40

f Sockets

50

e Sockets

52

1/2"

P Q

P Q

metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3709, ASME B 107.5 M,


American sizes: ASME B 107.1, Fed. Spec. GGG-W-641,
SAE AS 954-E (test loads), HPQ high performance steel, chrome plated.

DIN 3124/ISO 2725-1, ASME B 107.5M, E DIN EN 3709 (test loads),


HPQ high performance steel, chrome plated.

12,5

DIN
3120

ISO

1174-1

'

mm

d1
mm

d2
mm

d3
mm

L
mm

t1
t2
mm mm

03 03 00 08
03 03 00 09
03 03 00 10
03 03 00 11

8
9
10
11

13
13.7
14.5
15.8

22
22
22
22

7
8
9
10

38
38
38
38

9
9
9
9.5

03 03 00 12
03 03 00 13
03 03 00 14
03 03 00 15

12
13
14
15

17
18.3
19.9
21.2

22
22
22.7
22.7

11
12
13
14

38
38
38
38

03 03 00 16
03 03 00 17
03 03 00 18
03 03 00 19

16
17
18
19

22.4
24
24.7
26.2

23.7
23.7
23.7
25

15
15.2
17
18

03 03 00 20
03 03 00 21
03 03 00 22
03 03 00 23

20
21
22
23

27.2
28.7
29.7
30.7

25
26
26
26

03 03 00 24
03 03 00 25
03 03 00 26
03 03 00 27

24
25
26
27

32
33.2
34.4
36.2

03 03 00 28
03 03 00 30
03 03 00 32
03 03 00 34

28
30
32
34

37.4
39.7
42.2
45

'

Code

d1
mm

d2
mm

d3
mm

L
t1
mm mm

t2
mm

R
g

03 01 00 08 8
03 01 00 09 9
03 01 00 10 10
03 01 00 11 11

13
13.7
14.5
15.8

22
22
22
22

7
8
9
10

38
38
38
38

9
9
9
9.5

22
22
22
22

56
57
57
52

10
10
10
10

7.50
7.75
5.95
6.60

03 01 00 12
03 01 00 13
03 01 00 14
03 01 00 15

12
13
14
15

17
18.3
19.9
21.2

22
22
22.7
22.7

11
12
13
14

38
38
38
38

13
13
13
13.5

22
22
20.5
20.2

58
60
60
62

10
10
10
10

6.35
5.95
6.50
6.65

03 01 00 16
03 01 00 17
03 01 00 18
03 01 00 19

16
17
18
19

22.4
24
24.7
26.2

23.7
23.7
23.7
25

15
15.2
17
18

38
38
38
38

13.5
15
15.5
16

19.6
19.6
19.1
21.7

63
66
71
78

10
10
10
10

6.65
7.05
7.45
7.05

03 01 00 20
03 01 00 21
03 01 00 22
03 01 00 23

20
21
22
23

27.2
28.7
29.7
30.7

25
26
26
26

19
20
21
20

42
42
42
42

17
18
18
18

25.5 89
25.2 104
24.9 113
25.4 114

10
10
10
5

8.30
8.35
7.95
9.90

03 01 00 24
03 01 00 25
03 01 00 26
03 01 00 27

24
25
26
27

32
33.2
34.4
36.2

26
25
25
26

21
22
23
24

42
42
42
45

18.5
18.5
18.5
19.5

24.9
24.6
24.3
27

117
119
122
150

5 8.40
5 11.70
5 10.70
5 11.00

03 01 00 28
03 01 00 30
03 01 00 31
03 01 00 32

28
30
31
32

37.4
39.7
42.2
42.2

27
28
28
28

25
27
28
29

45
45
47
47

19.5
20.5
22
22

26.7
26.1
27.9
27.6

158
171
215
189

5
5
5
5

45

28

31

47

22

27

209

5 16.70

Code
'

mm

03 01 00 34 34
'

'

13.20
11.80
16.10
11.80

'

R
g

22
22
22
22

56
56
60
58

10
10
10
10

7.05
7.20
5.80
6.50

13
13
13
13.5

22
22
20.5
20.2

52
51
59
63

10
10
10
10

6.40
5.85
6.60
6.60

38
38
38
38

13.5
15
15.5
16

19.6
19.6
19.1
21.7

65
70
73
79

10
10
10
10

6.55
6.90
7.35
6.90

19
20
21
20

42
42
42
42

17
18
18
18

25.5 95
25.2 110
24.9 115
25.4 119

10
10
10
5

8.35
8.20
7.55
9.90

26
26
25
26

21
22
23
24

42
42
42
45

18.5
18.5
18.5
19.5

24.9
24.6
24.3
27

125
128
132
161

5 8.40
5 11.50
5 10.40
5 10.50

27
28
28
28

25
27
29
31

45
45
47
47

19.5
20.5
22
22

26.7
26.1
27.6
27

166
186
200
235

5
5
5
5

13.20
11.00
11.60
14.50

ES 52/17

f Sockets

50a
'

Code

d2
mm

d3
mm

L
mm

t1
t2
mm mm

R
g

3/8
7/16
1/2
9/16

14.3
16.3
18.3
20.3

22
8.3
22
9.9
22
11.5
22.7 13.1

38 9
38 9
38 13
38 13

22
22
22
20.2

57
59
59
62

10
10
10
10

6.80
6.80
6.60
7.40

03 41 00 35
03 41 00 36
03 41 00 38
03 41 00 40

19/32
5/8
11/16
3/4

21.3
22.4
24.2
26.2

22.7
23.7
23.7
25

13.5
15
16.5
18

38
38
38
38

13.5
13.5
15.5
16

20.1
19.6
19.2
21.7

61
62
68
78

10
10
10
10

7.80
7.25
7.70
7.70

03 41 00 41
03 41 00 42
03 41 00 44
03 41 00 46

25/32
13/16
7/8
15/16

27
28.2
29.7
32

25
25
26
26

18.6
19.4
21
22.6

41
41
42
42

16
16.5
18
18.5

24.6 90
24.3 95
24.9 111
24.4 121

5
5
5
5

8.60
8.65
8.75
9.20

03 41 00 48
03 41 00 50
03 41 00 52
03 41 00 54

1
1 1/16
1 1/8
1 3/16

33.7
36.2
38.1
39

27
26
28
28

24.2
25.8
27.4
28

42
45
45
45

18.5
19.5
20
20.5

24
26.5
26
25.9

135
155
167
178

5 9.40
5 12.00
5 11.60
5 12.50

03 41 00 56
03 41 00 58
03 41 00 60
03 41 00 62

1 1/4
1 5/16
1 3/8
1 7/16

40
41.8
46
49.4

28
28
28
31

30.5
32.1
33.7
34

45
47
50
54

21
22
23
26

25.1
26.7
29.2
33.1

196
210
232
320

5
5
5
5

51

31

35

54 26

"

d1
mm

03 41 00 24
03 41 00 28
03 41 00 32
03 41 00 34

'

03 41 00 64 1 1/2
'

32.8 330

175 x 350 x 47 mm, 17 pieces


'

Code

'

96 83 81 12

1760

'

No 52

'

83 81 20 30
'

Empty tray

139.70

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

107

8.65

12.50
15.70
19.40
21.90

5 22.20

127

Sockets, Socket Sets


TCS 52/17

1/2"

P Q

12,5

DIN
3120

f Sockets

51

extra deep, metric sizes: DIN 3124/ISO 2725-1, E DIN EN 3710,


E DIN EN 3709, ASME B 107.5M,
American sizes: ASME B 107.1, Fed. Spec. GGG-W-641, SAE AS 954-E,
HPQ high performance steel, chrome plated.

ISO

1174-1

175 x 350 x 40 mm, 17 pieces


'

Code

'

96 83 81 77

1605

'

150.75

1/2"

No 52

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

'

'

Code
'

TCS 52/18 MF

Code

'

96 83 03 59

1850

'

170.15

1/2"

No 52

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32; 34 mm

'

R
g

10
13
14
15

14.5
18.3
19.9
21.2

22
9
22 12
22.7 13
22.7 14

83
83
83
83

19
35
35
35

67
90 10 17.60
67
122 10 14.80
65.2 129 10 16.30
64.9 132 10 17.90

03 02 00 16
03 02 02 16
03 02 00 17
03 02 00 18

16
16-5/8 1)
17
18

22.4
22.4
24
24.7

23.7
23.7
23.7
23.7

15
15.4
16
17

83
83
83
83

35
19
35
35

64.6
64.5
64.3
64.1

145
137
132
170

10
10
10
10

17.80
18.80
16.60
18.20

03 02 00 19
03 02 02 08
03 02 00 21
03 02 00 22

19
26.2
20.8-13/16 1) 27.7
21
28.7
22
29.7

25
26
26.5
27.5

18
20
20
21

83
83
83
83

35
22
35
35

66.7
66.2
66.2
65.5

186
194
231
200

10
10
10
10

16.50
21.00
18.90
18.30

03 02 00 24
03 02 00 26
03 02 00 27
03 02 00 30

24
26
27 2)
30 2)

30
32.5
34
37.5

21
23
27
30.2

83
83
83
83

35
35
20
35

66.1
65.3
60
65

280
334
294
341

5
5
5
5

18.70
24.80
21.60
21.90

29

83

35

63.9 461

'

mm/"

03 02 00 10
03 02 00 13
03 02 00 14
03 02 00 15
1

175 x 350 x 55 mm, 18 pieces

d1 d2
d3 L
t1
t2
mm mm mm mm mm mm

03 02 00 32 32
'

32
34.4
36.2
39.7

42.4 40

5 23.60

) with rubber insert for spark plugs


2
) for diesel injector (Audi, Daihatsu, Ford, Mazda, Mercedes, Mitsubishi,
Nissan, Opel, Peugeot, Toyota, VW, Volvo)
1

TCS 50/51/52/32

'

Code
'

175 x 350 x 50 mm, 32 pieces


'

Code

'

96 83 81 91

2950

'

1/2"

No 50

283.90

a sizes 8; 9; 10; 11; 12; 13; 14; 15;

16; 17; 18; 19; 30 mm

'

1/2"

No 52

a sizes 10; 11; 12; 13; 14; 15; 16;

17; 18; 19; 20; 21; 22; 24; 27; 30;


32 mm

'

1/2"

No 51
'

a sizes 22; 27 mm

R
g

'

96 83 87 80

1600

'

1/2"

173.45

a sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8;

11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16;


1 1/8; 1 3/16; 1 1/4"

R
g

22
8.3
22
9.9
22
11.5
22.7 13.1

83
83
83
83

19
19
35
35

67
93
67
102
67
122
65.2 131

5
5
5
5

20.30
20.30
18.70
18.70

03 42 00 36
03 42 00 38
03 42 00 40
03 42 00 42

5/8
11/16
3/4
13/16

22.4
24.2
26.2
27.7

23.7
23.7
25
26

15
16.5
18
19.5

83
83
83
83

35
35
35
35

64.6
64.2
66.7
66.3

145
158
188
170

5
5
5
5

20.80
21.80
21.90
22.70

03 42 00 44 7/8
03 42 00 46 15/16
03 42 00 48 1
03 42 00 50 1 1/16

29.7
32
33.7
36.2

27.5
30
32
34

21
22.6
24.2
25.8

83
83
83
83

35
35
35
35

65.9
65.7
65
64.5

200
281
260
359

5
5
5
5

23.20
24.70
26.20
29.50

1 1/8
1 3/16
1 1/4
1 5/16

38.1
39
40
41.8

36
37
38
40

27.4
28
30.5
32.1

83
83
83
83

35
35
35
35

64
63.9
63.1
62.7

300
377
433
479

5
5
5
5

31.20
28.40
30.60
30.20

46 44
49.4 47
51 49

33.7
34
35

83
83
83

35 62.2 506
35 62.1 635
35 61.8 675

'

Code

d3
L
t1 t2
mm mm mm mm

14.3
16.3
18.3
20.3

03 42 00 60 1 3/8
03 42 00 62 1 7/16
03 42 00 64 1 1/2

'

d1 d2
mm mm

3/8
7/16
1/2
9/16

175 x 350 x 40 mm, 17 pieces

128

"

03 42 00 24
03 42 00 28
03 42 00 32
03 42 00 34

03 42 00 52
03 42 00 54
03 42 00 56
03 42 00 58

'

TCS 50a/17

No 50a

f Sockets

51a
'

5 32.00
5 32.30
5 33.60

51/8

Set: Sockets

p Sockets

50TX

1/2"

P Q

12,5

long.
Content:
13; 17; 19; 22; 24; 27; 30; 32 mm

for external TORX screws, HPQ high performance steel, chrome plated.

3120

DIN
ISO

1174-1

'

Code
'

96 03 02 02
'

2780

179.50
'

in sturdy sheet steel box


'

e Sockets

51S

P Q

size

03 27 00 10
03 27 00 11
03 27 00 12
03 27 00 14

E10
E11
E12
E14

9.4
10.1
11.1
12.9

13
14
14.9
16.7

22
22
22
22

03 27 00 16
03 27 00 18
03 27 00 20
03 27 00 24

E16
E18
E20
E24

14.7
16.6
18.4
22.1

19
21
23.5
27.8

22
9.3 38
26.5 10.4 38
26.5 12 38
26 14.1 41.2

extra deep, DIN 3124/ISO 2725-1, E DIN EN 3710,


E DIN EN 3709 (test loads), HPQ high performance steel, chrome plated.

L
t1
t2 R
C d1 d2 d3
mm mm mm mm mm mm mm g S

Code
'

'

50TX/7

5.6
6
7.2
8

38
38
38
38

9.5
9.5
9.5
11

22
22
22
22

12.5
13.5
15
17.5

22
22
22
23.6

53
50
55
56
60
92
98
120

10
10
10
10

9.10
9.15
9.15
9.95

10 9.95
10 10.40
10 10.40
10 14.50

p Set: Sockets

Q
'

Code
'

03 24 00 17
03 24 00 19
03 24 02 08
03 24 00 22
'

mm/"

for external TORX screws.


Content: E10; E12; E14; E16; E18; E20; E24

d1
d2 d3 L
t1 t2 R
mm mm mm mm mm mm g S

17
24
19
26.2
1
20.8-13/16 ) 27.7
22
29.7

23.7
25
26
27.5

16
18
20
21

83
83
83
83

35
35
22
35

64.3
66.7
66.2
65.9

157
190
196
246

10
10
10
10

20.20
20.20
22.40
24.40

1
) with rubber insert for spark plugs and for tightening and untightening
wheel nuts on Japanese cars
'

5100

Rubber insert

for size 20.8 mm (No 51; 51S; 46).

'

Code

'

09 01 00 01

'

'

96 03 27 03

'

1.25

623

76.65

in carton packing
'

50TX/8

e UNIFLEX sockets

53

Code

'

p Set: Sockets

for external TORX screws.


Content:
E10; E11; E12; E14; E16; E18; E20;
E24

Chrome Alloy Steel, chrome plated.

'

'

Code
'

mm

d1
d2
d3
L
t1
t2 R
mm mm mm mm mm mm g S

Code
'

03 04 00 10
03 04 00 13
03 04 00 16
03 04 00 17

10
13
16
17

14.7
18.4
22.4
23.5

25
25
25
25

9
12
15
16

70
70
69
70

12
12
13
13

20
20
17
18

136
140
141
141

1
1
1
1

34.40
36.50
36.20
38.30

03 04 00 18
03 04 00 19

18
19

25
26.3

25
25

17
18

70
70

12
12

18 145
17.5 148

1
1

36.20
36.00

'

96 03 27 04
'

R
g

1155

103.45

in sturdy sheet steel box


'

129

Sockets, Socket Sets


TCS 50TX/54TX/17

1/2"

12,5

DIN
3120

i INHEX sockets

54

for hexagon socket head screws, DIN 7422,


Chrome Alloy Steel, chrome plated.

ISO

1174-1

175 x 350 x 40 mm, 17 pieces


'

'

Code

'

96 83 87 63

1382

'

1/2"

No 50TX

215.60

a sizes E10; E11; E12; E14; E16;

E18; E20; E24

'

1/2"

No 54TX

h Sockets spline-drive

50aPSP

L1
mm

L2
mm

d
mm

R
g

03 05 00 04
03 05 00 05
03 05 00 06
03 05 00 07

4
5
6
7

60
60
60
60

22
22
22
22

22.7
22.7
22.7
22.7

68
68
71
75

5
5
5
5

8.90
8.90
8.90
8.90

03 05 00 08
03 05 00 10
03 05 00 12
03 05 00 14

8
10
12
14

60
60
60
60

22
22
20
20

22.7
22.7
23.7
23.7

79
97
122
135

5
5
5
5

9.40
10.10
11.10
12.00

03 05 00 17
03 05 00 19

17
19

60
60

20
20

27.5
31

186
242

5
5

14.00
20.10

a sizes T20; T25; T27; T30; T40;

T45; T50; T55; T60

'

mm

Code
'

'

Q
'

B
"

L1
mm

L2
mm

d
mm

R
g

03 45 00 14
03 45 00 16
03 45 00 20
03 45 00 24

7/32
1/4
5/16
3/8

60
60
60
60

22
22
22
22

22.7
22.7
22.7
22.7

70
75
81
97

5
5
5
5

9.25
9.25
9.60
9.60

03 45 00 28
03 45 00 32
03 45 00 34
03 45 00 36

7/16
1/2
9/16
5/8

60
60
60
60

22
20
20
20

22.7
23.7
23.7
27.5

103
125
137
169

5
5
5
5

11.20
10.80
12.40
13.90

03 45 00 40

3/4

60

20

31

244

22.00

Code
'

1
'

Code
'

03 01 20 24
03 01 20 28
03 01 20 34

Spline
size
12
14
18

A d1
"

3/8
7/16
9/16

'

d2 d3
L
t1
t2 R
mm mm mm mm mm mm g

15.5 22
8.6
18 23.7 10.4
22 23.7 13.5

38
38
38

9.5
11
12

22
22
20

55
65
71

S
5
5
5

22.30
21.40
26.20

'

54/10

h Socket spline-drive

50aPLSP

i INHEX sockets

54a

MS-33787, HPQ high performance steel, gunmetal finish.

INHEX socket set No 54

sizes 4; 5; 6; 7; 8; 10; 12; 14; 17;


19 mm

Q
extra deep bolt clearance, MS-33787, HPQ high performance steel,
gunmetal finish.

'

'

Code
'

03 01 30 28

Spline
size
14

A d1
"

7/16

'

d2 d3
L
t1
t2 R
mm mm mm mm mm mm g
18 23.7 10.4

50

11

34

83

S
5

Code

'

21.40

96 03 05 08

1655

'

133.15

in sturdy sheet steel case

51aP

'

h Socket

ES 54/54KK

extra deep bolt clearance, HPQ high performance steel, gunmetal finish.
For the brakes on A320/A321.

175 x 350 x 38 mm, 14 pieces


'

Code
'

03 42 10 41
'

Code

'

A d1
"

25/32

d2 d3
L
t1
t2 R
mm mm mm mm mm mm g
28 23

17.9

80

21

36

182

'

96 83 81 14

S
1

1630

'

No 54

82.50

No 54KK
'

'

130

171.05

a sizes 4; 5; 6; 7; 8; 10; 12; 14; 17;

19 mm

'

83 81 20 46

1/2"

Empty tray

1/2"

a sizes 5; 6; 8; 10 mm
108

8.65

TCS 54/54X/16

ES 1054/2054

1/2"

12,5

DIN
3120

ISO

1174-1

175 x 350 x 35 mm, 16 pieces

175 x 175 x 30 mm, 6 pieces

'
'

Code

'

Code

'

96 83 87 62

1665

'

202.90

96 83 81 64

900

'

1/2"

No 54

a sizes 4; 5; 6; 7; 8; 10; 12; 14;

17 mm

'

a sizes 8; 10; 12 mm
1/2" a sizes 5; 6; 14 mm

'

1/2"

No 54X

a sizes M5; M6; M8; M10; M12;

M14; M16

'

83 81 20 81
'

55

4.30

j INHEX sockets

for hexagon socket head screws with guide pin, Chrome Alloy Steel,
chrome plated.

for hexagon socket head screws, extra long, DIN 7422,


Chrome Alloy Steel, chrome plated.

'

'

Code
'

No

mm

03 15 12 05
03 15 12 06
03 15 12 07
03 15 12 08

2054/5
2054/6
2054/7
1054/8K

03 15 14 10
03 15 14 12
03 15 14 14

1054/10 10
1054/12 1) 12
2054/14 14

5
6
7
8

L1
L2
mm mm
120
120
120
120

d
mm

R
g

Code

mm

L1
mm

L2
mm

d
mm

R
g

03 07 00 05
03 07 00 06
03 07 00 08
03 07 00 10

5
6
8
10

60
60
60
60

22
22
22
22

22.7
22.7
22.7
22.7

70
71
70
95

5
5
5
5

10.50
10.50
11.70
12.30

03 07 00 12
03 07 00 14

12
14

60
60

20
20

23.7
23.7

120
131

5
5

14.20
14.60

'

82
82
82
82

22.7 78
22.7 84
22.7 96
22.7 104

5
5
5
5

9.55
9.55
10.30
10.70

140 102
140 100
140 100

22.7 150
23.7 197
23.7 231

5
5
5

11.40
13.40
14.10

'

'

) For fitting radiators

1
'

Empty tray

54IC

i INHEX sockets

73.00

1/2"

No 1054
No 2054

i INHEX sockets

54KK

with ball point hexagon, for hexagon socket head screws,


swivel angle up to 25 each side, Chrome Alloy Steel, chrome plated.

i INHEX sockets
for hexagon socket head screws, special lengths, DIN 7422,
Chrome Alloy Steel, chrome plated.

'

Code
'
'

Code

No

mm

L1
L2
mm mm

03 15 18 05
03 15 07 06
03 15 10 06
03 15 22 06

1054/5
1054/6
3054/6 1)
1054/6L

5
6
6
6

180 20
70 32
100 62
220 182

22
118
22.7 72
22.7 80
22.7 108

5
5
5
5

16.70
9.55
16.60
19.70

03 15 10 07
03 15 08 08
03 15 14 08
03 15 07 13

1054/7
7
3054/8
8
1054/8
8
1054/13 13

100 62
80 42
140 102
70 25

22.7 87
22.7 88
22.7 114
24
130

5
5
5
5

16.60
14.40
17.60
25.00

'

'

d
mm

R
g

03 28 00 05
03 28 00 06
03 28 00 07
03 28 00 08
1

03 28 00 10

mm
5
6
7 1)
8
10

'

L1
mm

L2
mm

d
mm

R
g

100
100
100
100

62
62
62
62

22.7
22.7
22.7
22.7

75
80
84
95

5
5
5
5

11.90
11.90
13.20
12.70

100

62

22.7

120

13.60

) Application: BMW brakes

1
'

ES 54KK/5

) for intake manifolds on 5-cylinder diesel engines on VW/Audi


and T4 vans

'

175 x 175 x 30 mm, 5 pieces


'

Code

'

96 83 81 65

505

'

No 54KK
'

83 81 20 51
'

Empty tray

1/2"

67.50

a sizes 5; 6; 7; 8; 10 mm
55

4.20

131

Sockets, Socket Sets

12,5

DIN
3120

ISO

1174-1

i INHEX sockets

1054KK

1/2"

m Screwdriver sockets

54X

for trisquare socket head screws (XZN), DIN 2324,


Chrome Alloy Steel, chrome plated.

with ball point hexagon,


for hexagon socket head screws,
swivel angle up to 25 each side, special lengths,
Chrome Alloy Steel, chrome plated.
'

Code
'

03 31 00 05
03 31 00 08

mm

L1
mm

L2
mm

d
mm

R
g

5
8

238
238

200
200

22.7
22.7

145
154

5
5

'

'

19.50
21.90

q Screwdriver sockets

54CV

for spline socket head screws (Ribe-CV), Chrome Alloy Steel,


chrome plated.

Code

size

L1
mm

L2
mm

d
mm

R
g

03 06 00 05
03 06 00 06
03 06 00 08
03 06 00 10

M5
M6
M8
M10

60
60
60
60

22
22
22
22

22.7
22.7
22.7
22.7

67
74
79
94

5
5
5
5

11.00
11.00
11.00
12.80

03 06 00 12
03 06 00 14
03 06 00 16

M12
M14
M16

60
60
60

20
20
20

23.7
23.7
27.5

120
128
174

5
5
5

13.80
14.70
16.10

'

'

m Screwdriver sockets

3054X

'

Code

size

L1
mm

03 09 00 05
03 09 00 06
03 09 00 07
03 09 00 08

M5
M6
M7
M8

60
60
60
60

22
22
22
22

22.7
22.7
22.7
22.7

69
71
78
78

5
5
5
5

10.80
10.50
13.40
10.50

03 09 00 09
03 09 00 10
03 09 00 12
03 09 00 13

M9
M10
M12
M13

60
60
60
60

22
22
20
20

22.7
22.7
23.7
23.7

92
95
119
123

5
5
5
5

14.60
11.70
12.30
17.30

03 09 00 14
03 09 00 16

M14
M16

60
63

20
23

23.7
27.5

126
163

5
5

14.40
15.60

'

'

L2
mm

d
mm

for trisquare socket head screws (XZN), DIN 2324,


extra long, Chrome Alloy Steel, chrome plated.

Application:
Size M7, for brakes, cylinder head screws, bodywork and motor jobs incl.
valve covers and spark plug covers on Fiat vehicles
Size M8, bodywork and motor jobs incl. valve covers and spark plug
covers on Fiat vehicles
Size M9, brakes, cylinder head screws (1.2 l; 8V/16V) on Fiat vehicles
Size M10, for cylinder head screws (1.2 l; 8V/16V) on Fiat vehicles
Size M12 for cylinder head screws on Fiat 2.0 l engines
Size M13, for brakes, cylinder head screws on Fiat vehicles; cylinder head
screws on Alfa vehicles, e.g. 1.6 l; 16V engines
Size M14; M16, for cylinder head screws on Alfa vehicles, e.g. 1.6 l; 16V
engines
'

54CV/9

'

Code

size

L1
mm

L2
mm

d
mm

R
g

03 26 14 08
03 26 14 10
03 26 14 12
03 26 14 14

M8
M10
M12
M14

140
140
140
140

102
102
102
100

22.7
22.7
22.7
23.7

109
142
160
225

5
5
5
1

'

'

11.70
15.70
15.60
18.30

Application: sizes M10 and M12 for cylinder head screws on VW/Audi,
Opel, Mercedes-Benz, size M14 for cylinder head screws on VM diesel
engines, Chrysler
'

3054X/54X/8

m Set: Screwdriver sockets

for trisquare socket head screws


(XZN),
8 pieces,
Content: 3054X: M8, M10, M12
54X: M6, M8, M10, M12, M14

q Set: Screwdriver sockets

for spline socket head screws


(Ribe-CV),
9 pieces,
Content: M5; M6; M7; M8; M9; M10;
M12; M13; M14

'

Code
'

96 03 26 06
'

1460

128.70

in sturdy sheet steel case


'

m Screwdriver sockets

'

Code
'

96 03 09 01
'

in sturdy sheet steel case


'

R
g

1420

136.35

for trisquare socket head


screws (XZN), special lengths,
DIN 2324, Chrome Alloy Steel,
chrome plated.
'

Code

No

size

L1
mm

L2
mm

d
mm

R
g

03 16 08 08
03 16 12 08
03 16 11 10
03 16 11 12

1054x
2054x
2054x
2054x

M8
M8
M10
M12

80
120
110
110

42
82
72
70

22.7
22.7
22.7
23.7

86
104
130
168

5
5
5
5

'

'

Application: No 1054x, size M8, for jointed shafts on VW/Audi


'

132

15.20
16.70
15.90
17.80

n Screwdriver sockets

54TX

ES 54X/54TX

1/2"

for inside TORX screws, Chrome Alloy Steel, chrome plated.


12,5

DIN
3120

ISO

1174-1

175 x 350 x 38 mm, 16 pieces

'

Code

size

mm

L1
L2
mm mm

03 10 00 20
03 10 00 25
03 10 00 27
03 10 00 30

T20
T25
T27
T30

3.8
4.4
5
5.5

55
55
55
55

17
17
17
17

22.7
22.7
22.7
22.7

71
71
72
72

5
5
5
5

11.30
11.00
11.00
10.80

03 10 00 40
03 10 00 45
03 10 00 50
03 10 00 55

T40
T45
T50
T55

6.6
7.8
8.8
11.2

55
55
55
58

17
17
17
18

22.7 72
22.7 74
22.7 86
23.7 112

5
5
5
5

12.60
12.60
12.40
15.50

03 10 00 60
03 10 00 70

T60
T70

13.2
15.5

58
60

18
20

23.7 113
27.5 155

5
1

16.10
21.60

'

d
mm

R
g

'

Code

'

96 83 81 15

1600

'

1/2"

No 54X

M14; M16

'

'

'

83 81 20 45
'

Empty tray

111

8.65

TCS 54/54TX/18

'

n Set: Screwdriver sockets

for inside TORX screws, 9 pieces,


Content: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60

1/2" a sizes T20; T25; T27; T30; T40;


T45; T50; T55; T60

No 54TX

Application: size T55 for the cylinder head screws on the Opel Omega V6

54TX/9

212.35

a sizes M5; M6; M8; M10; M12;

175 x 350 x 40 mm, 18 pieces


'

Code

'

96 83 87 82

1665

'

1/2"

No 54

227.70

a sizes 4; 5; 6; 7; 8; 10; 12; 14; 17

mm

'

1/2" a sizes T20; T25; T27; T30; T40;


T45; T50; T55; T60

No 54TX
'
'

Code

'

96 03 10 04

820

'

n Screwdriver sockets

S
1

116.50

for inside TORX screws, extra long, Chrome Alloy Steel, chrome plated.

packed in carton
'

54TX/10

n Socket set TORX

for inside TORX screws,


10 pieces,
Content:
sizes T20; T25; T27; T30; T40 (2x);
T45; T50; T55; T60

'

Code

No

C L1 L2
size mm mm mm

d
mm

03 13 12 30
03 13 14 40
03 13 14 45
03 13 14 50

1054TX
2054TX
2054TX
1054TX

T30
T40
T45
T50

120 82
140 102
140 102
140 102

22.7 99
22.7 110
22.7 111
22.7 143

5
5
5
5

12.70
13.70
13.70
15.10

03 13 14 55 1054TX T55 11.2 140 102


03 13 14 60 1054TX T60 13.2 140 100

22.7 159
23.7 221

5
5

15.30
18.80

'

'

'

96 03 10 05
'

R
g

1300

Application: size T55 for the cylinder head screws on various Ford models,
e.g. Mondeo 16V

'

Code

5.5
6.6
7.8
8.8

'

146.75

in sturdy sheet steel case


'

133

Sockets, Socket Sets


n Screwdriver sockets

1054TX

1/2"

o Screwdriver sockets

54TXB

for inside TORX screws, extra long, Chrome Alloy Steel, chrome plated.
12,5

for inside TORX screws, tamper proof, with hollow point,


Chrome Alloy Steel, chrome plated (TORX TAMPER RESISTANT).

DIN
3120

ISO

1174-1
'

Code

size

mm

L1
mm

L2
mm

d
mm

R
g

03 13 12 40
03 13 12 45
03 13 10 70

T40
T45
T70

6.6 120
7.8 120
15.5 107

82
82
67

22.7
22.7
23.7

100
100
201

5
5
5

'

'

'

19.20
19.30
26.60

ES 1054/2054TX/6

Code

size

mm

L1
L2
mm mm

d
mm

R
g

03 11 00 20
03 11 00 25
03 11 00 27
03 11 00 30

T20
T25
T27
T30

3.8
4.4
5
5.5

55
55
55
55

17
17
17
17

22.7
22.7
22.7
22.7

70
70
71
71

5
5
5
5

13.20
13.00
13.00
13.00

03 11 00 40
03 11 00 45
03 11 00 50
03 11 00 55

T40
T45
T50
T55

6.6
7.8
8.8
11.2

55
55
55
58

17
17
17
18

22.7 71
22.7 73
22.7 86
23.7 111

5
5
5
5

13.40
13.40
14.30
16.10

03 11 00 60

T60

13.2

58

18

23.7 113

18.00

'

'

Application: size T50 for the spare wheel retaining plate on the bumper of
the Opel Frontera Sport
'

175 x 175 x 30 mm, 6 pieces


'

'

96 83 81 63

950

'

No 1054TX
No 2054TX
'

83 81 20 81
'

1/2"
1/2"

93.60

a sizes T30; T50; T55; T60


a sizes T40; T45

Empty tray

55

o Set: Screwdriver sockets

54TXB/9

Code

4.30

for inside TORX screws,


tamper proof, with hollow point
(TORX TAMPER RESISTANT).
9 pieces
Content:
T20; T25; T27; T30; T40; T45; T50; T55; T60
'

1054TX/4Pc

n Set: Screwdriver sockets

Code

for inside TORX screws,


in plastic wallet, 4 pieces,
Content:
T40; T45; T50; T55

'

96 03 10 07
'

811

130.60

in carton packing with transparent cover


'

54TXB/10
'

Code
'

96 03 13 01
'

1054KKTX*

527

75.50

n Screwdriver sockets

for inside TORX screws, with ball point, swivel angle up to 20 each side,
extra long, Chrome Alloy Steel, chrome plated.

o Set: Screwdriver sockets

for inside TORX screws,


tamper proof, with hollow point
(TORX TAMPER RESISTANT).
10 pieces
Content:
T20; T25; T27; T30; 2 x T40; T45;
T50; T55; T60

'

Code
'

96 03 10 08
'

1288

161.65

in sturdy sheet steel box


'

50CL

Clip strips

for socket retention, with 9 or 11 retaining clips.


Supplied without sockets.
'

Code

size

mm

L1
L2
mm mm

d
mm

03 20 00 40
03 20 00 45
03 20 00 50

T40
T45
T50

6.6
7.8
8.8

140 102
140 102
140 102

22.7 105
22.7 105
22.7 143

'

'

R
g

S
5
5
5

18.30
18.70
19.70

* to be discontinued
'

'

Code

size

L
mm

R
g

80 50 00 01
80 50 00 02

1
2

200
300

54
73

5
5

'

'

134

5.70
5.70

Drive tools and accessories


1/2"

517

u, finish: Chrome Alloy Steel, chrome plated.

Flexible joint ratchet

1/2"

reversible, 60 teeth,
handle may be raised or lowered by
approx. 90. Lockable in following
positions: straight, 30 up, 60 up, 30 down.
Unlocked by depressing button in handle, registered design.

12,5

DIN
3120

ISO

1174-1
'

512

Ratchet

Code

L
mm

b
mm

a
mm

R
g

13 26 00 01

415

43

26

798

'

reversible, 36 teeth,
with 2-component handle,
DIN 3122/ISO 3315.

'

522

83.00

Ratchet adaptor

reversible, 20 teeth.

'

Code
'

13 11 10 10
'

L
mm

b
mm

a
mm

R
g

265.5

41

22.5

600

512G

60.00

'

Code

L
mm

mm

R
g

13 14 00 00

67.5

40

316

'

Ratchet

'

reversible, 36 teeth,
with 2-component handle,
DIN 3122/ISO 3315.
Encapsulated housing minimises the ingress of dirt.

532

131.00

Ratchet

long handle, reversible, 36 teeth,


with 2-component handle.
'

Code

L
mm

b
mm

a
mm

R
g

13 12 10 10

380

41

22.5

821

'

Code
'

13 11 11 10
'

L
mm

b
mm

a
mm

R
g

265.5

41

22.5

613

'

67.50

'

532G
512QR N

QuickRelease ratchet, fine tooth

83.50

Ratchet

long handle, reversible, 36 teeth,


with 2-component handle.
Encapsulated housing minimises the ingress of dirt.

design patent, reversible, 60 teeth,


with QuickRelease safety lock and 2-component handle,
for use in confined spaces, re-engages after movement of 6,
DIN 3122/ISO 3315.

'

Code

L
mm

b
mm

a
mm

R
g

13 12 11 10

380

41

22.5

815

'

'

89.50

'

Code
'

13 11 10 20
'

L
mm

b
mm

a
mm

R
g

265.5

41

23

647

512SG-QR

68.00

QuickRelease ratchet

reversible, 36 teeth,
with QuickRelease safety lock and steel handle, DIN 3122/ISO 3315.
'

Code
'

13 11 00 30
'

L
mm

b
mm

a
mm

R
g

265.5

41

22.5

680

515

5120 +
7210/15

68.50

Spare parts set for ratchets


No 512, 512SG, 532, 538

Content:
1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws.

Ratchet, fine tooth

reversible, 60 teeth,
with 2-component handle,
for use in confined spaces,
re-engages after movement of 6, DIN 3122/ISO 3315.

'

Code
'

19 04 00 00
'

'

Code

b
mm

a
mm

R
g

13 23 10 11

265

40

26.2

502

'

S
1

27.40

for ratchets from 1990

L
mm

'

127

'

48.80

5120G

Spare parts set for ratchets


No 512G, 532G

Content:
1 pinion; 1 pawl; 1 lever with pin; 1 ball; 2 compression springs; 2 screws.
'

Code
'

19 04 00 30
'

R
g

120

29.10
135

Sockets, Socket Sets


5120QR N

1/2"

12,5

DIN
3120

ISO

Spare parts set for ratchet No 512QR N

5040

Spare parts set for No 504/15, 504/18

Content:
1 universal joint
1 screw
1 spring washer

Content:
1 pinion; 1 pawl; 1 lever with pin; 1 ball;
2 compression springs; 2 screws.

1174-1
'

Code

140

'

19 04 00 40
'

'

31.90

Code
'

96 19 08 00
'

5120QR

Spare parts set for ratchets


No 512, 512SG-QR

5040N

R
g

127

'

19 04 00 20
'

20.30

Spare parts set for No 504/24

'

30.30

Code
'

96 19 08 01
'

7350/20

'

Code

Content:
1 universal joint
1 screw
1 spring washer

Content:
1 pinion; 1 pawl; 1 lever with pin; 1 ball;
2 compression springs; 2 screws.

75

81

20.60

Spare parts set for ratchets No 515, 517


506

Content:
1 pinion; 1 pawl; 1 switching disk; 1 spring; 3 screws.

Sliding T-handle

DIN 3122/ISO 3315.

'

Code
'

59 25 10 20
'

'

146

30.40

for ratchets from 4/96

Code

L
mm

R
g

13 07 00 00

300

436

'

'

17.60

'

501

506QR

Speeder brace

QuickRelease sliding T-handle

working radius 105 mm,


DIN 3122/ISO 3315.

patent, with QuickRelease safety lock.


'

'

Code

R
g

13 10 00 10

456

615

'

501B

L
mm

R
g

13 07 10 00

300

470

'

L
mm

'

Code
'

39.50

509

Speeder brace

'

Code

size

L
mm

d
mm

R
g

13 01 00 01
13 01 00 04
13 01 00 02
13 01 00 03

2
3
5
10

52
75
130
255

23
23.2
23.2
23.2

88
120
191
341

5
5
5
5

'

'

Code

L
mm

R
g

13 10 00 02

456

886

'

504

Extensions

DIN 3123/ISO 3316.

with steel handle,


for greater axial power
transmission, detachable palm
head, working radius 105 mm,
DIN 3122/ISO 3315.

'

20.30

93.00

'

509W

Flexible handle

9.50
10.20
10.50
14.00

Extensions with wobble-drive

swivel angle 15 each side, maximum torque 200 N m.

DIN 3122/ISO 3315,


with 2-component handle.
'

Code

size

L
mm

R
g

13 06 10 12
13 06 10 13
13 06 10 24

15
18
24 U

397
469
610

674
770
1030

1
1
1

'

'

46.20
68.50
77.00

'

Code

size

L
mm

d
mm

R
g

13 01 00 05
13 01 00 06
13 01 00 07
13 01 00 08

2
3
5
10

52
75
130
255

23
23.2
23.2
23.2

80
120
191
341

5
5
5
5

'

'

136

11.70
12.70
14.50
17.90

509QR

QuickRelease extensions

514

Adaptor

1/2"

12,5

1/2"

3120

DIN

socket x 3/4" plug (12.5 x 20),


DIN 3123/ISO 3316, HPQ high performance steel.

patent, DIN 3123/ISO 3316.

ISO

1174-1

'

Code

L
mm

d
mm

R
g

13 03 00 05

44

25

118

'

'

7789-1

Code

size

13 01 10 01
13 01 10 04
13 01 10 02
13 01 10 03

2
3
5
10

52
75
130
255

'

'

3505

Adaptor

'

L
mm

12.40

d
mm

R
g

23
23
23
23

90
123
187
341

1
1
1
1

1/2"

11.00
11.60
12.10
15.90

socket x 1" plug (12.5 x 25 mm),


HPQ high performance steel.

'

Code

L
mm

d
mm

R
g

58 52 20 89

35

36.5

175

'

Special extension

'

24.40

409M/432M/ Set adaptors, 3 pieces


514M/3
1/4"

socket x 3/8" plug,


socket x 1/2" plug,
1/2" socket x 3/4" plug.
3/8"

'

Code

L
mm

d
mm

R
g

13 21 00 01

120

23.2

186

'

'

510

23.20

Universal joint
'

DIN 3123/ISO 3316.

Code
'

96 12 10 02
'

514M

'

Code

L
mm

d
mm

R
g

13 02 00 00

71

25

146

'

'

510QR

120

56.90

Adaptor

1/2"

socket x 3/4" plug


(12.5 x 20 mm).

25.30

QuickRelease universal joint

'

patent, DIN 3123/ISO 3316, with QuickRelease safety lock.

Code

L
mm

mm

R
g

13 03 00 10

22

38

50

'

'

543

23.40

Bit holder

c 5/16" inside hexagon,

'

Code

L
mm

d
mm

R
g

13 02 10 00

80

25

157

'

'

29.10

DIN 3126/ISO 1173 D 8.


Internal hex drive with a collar-thrust spring.
Bits are easy to insert, lock securely in position
and can be removed just as easily; even hex bits
with a wide groove (Type E, DIN 3126/ISO 1173).
'

513

Adaptor

Code

L
mm

d
mm

R
g

13 18 00 10

38

22

65

'

'

21.70

1/2"

socket x 3/8" plug (12.5 x 10),


maximum torque 202 N m, DIN 3123/ISO 3316,
HPQ high performance steel.

'

Code

L
mm

d
mm

R
g

13 03 00 02

35

22.7

55

'

'

9.85

137

Sockets, Socket Sets


52/9/3

1/2"
12,5

DIN
3120

ISO

1174-1

Socket set 1/2" u

52/16/5

'

Code

'

96 03 03 43

2900

'

Socket set 1/2" u

in sturdy sheet steel case,


21 pieces
Content:
15 sockets with hexagon No 52:
sizes 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22; 24; 27;
30 mm
1 socket, long, with rubber insert
No 51: sizes 16 mm - 5/8"
1 ratchet No 512
2 extensions No 509/5 (130 mm), No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

in sturdy sheet steel case,


12 pieces
Content:
9 sockets with hexagon No 52:
sizes 10; 13; 16; 17; 18; 19; 21;
22; 24 mm
1 ratchet No 512
2 extensions No 509/5 (130 mm),
No 509/10 (255 mm)

190.20
'

50/12/3

Socket set 1/2" u

96 03 04 06

50/16/6

R
g

96 03 04 35

3750

'

52/12/3

226.10

Socket set 1/2" u

54/8/4

52/16/6

223.30

Socket set 1/2" u

96 03 05 01
'

138

306.90

Socket set 1/2" u

in sturdy sheet steel case,


22 pieces
Content:
16 sockets with hexagon No 52:
sizes 10; 11; 12; 13; 14; 15; 16;
17; 18; 19; 21; 22; 24; 27; 30;
32 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm),
No 509/5 (130 mm), No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510
'

Code
'

96 03 04 48
'

'

Code

4957

'

in sturdy sheet steel case,


12 pieces
Content:
8 INHEX sockets No 54:
sizes 4; 5; 6; 8; 10; 12; 14; 17 mm
1 ratchet No 512
2 extensions No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506

'

96 03 04 47

3715

'

in sturdy sheet steel case,


22 pieces
Content:
16 sockets with bi-hexagon No 50:
sizes 10; 11; 12; 13; 14; 15; 16;
17; 18; 19; 21; 22; 24; 27; 30;
32 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm),
No 509/5 (130 mm), No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

'

96 03 04 36

Socket set 1/2" u

Code

'

'

301.10

'

in sturdy sheet steel case,


15 pieces
Content:
12 sockets with hexagon No 52:
sizes 10; 13; 16; 17; 18; 19; 21;
22; 24; 27; 30; 32 mm
1 ratchet No 512
2 extensions No 509/5 (130 mm),
No 509/10 (255 mm)

Code

4765

'

'

'

'

in sturdy sheet steel case,


15 pieces
Content:
12 sockets with bi-hexagon No 50:
sizes 10; 13; 16; 17; 18; 19; 21;
22; 24; 27; 30; 32 mm
1 ratchet No 512
2 extensions No 509/5 (130 mm),
No 509/10 (255 mm)

Code

Code

R
g

3833

230.10

R
g

4940

304.10

52/16/6QR

Socket set 1/2"

50ma/39/6N

in sturdy ABS plastic case,


22 pieces
Content:
16 sockets with hexagon
No 52: sizes 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm
1 ratchet No 512QR N
3 extensions No 509QR/3 (75 mm), No 509QR/5 (130 mm),
No 509QR/10 (255 mm)
1 T-handle No 506QR N
1 universal joint No 510QR
'

Code

Socket set 1/2" u

12,5

DIN
3120

ISO

1174-1

'

'

96 03 04 80

4243

'

316.00

Code

'

50/22/6

Socket set 1/2" u

96 03 01 40

R
g

'

96 03 04 07

5540

'

52/22/6

365.85

Socket set 1/2" u

96 03 04 09

in sturdy sheet steel case,


38 pieces
Content:
9 sockets with hexagon No 40:
sizes 4; 5; 5.5; 6; 7; 8; 9; 10;
11 mm
10 sockets with hexagon No 52:
sizes 13; 16; 17; 18; 19; 21; 22;
24; 27; 30 mm
3 INHEX sockets No 44: sizes 3; 4; 5 mm
5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm
2 ratchets No 415, No 512
4 extensions No 405/2 (54 mm), No 509/5 (130 mm),
No 405/6 (150 mm), No 509/10 (255 mm)
2 universal joints No 407, No 510
1 drive handle No 400
2 T-handles No 404, No 506

'

96 01 01 60

5275

'

50/54/25/6

R
g

5600

Code

'

'

'

in sturdy sheet steel case,


28 pieces
Content:
22 sockets with hexagon No 52:
sizes 8; 9; 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 20; 21; 22;
23; 24; 26; 27; 28; 30; 32 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

Code

547.65

40/52/27/11 Socket set 1/4"; 1/2" u

'

Code

8560

'

in sturdy sheet steel case,


28 pieces
Content:
22 sockets with bi-hexagon
No 50: sizes 8; 9; 10; 11; 12;
13; 14; 15; 16; 17; 18; 19; 20;
21; 22; 23; 24; 26; 27; 28; 30;
32 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm),
No 509/5 (130 mm), No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

'

1/2"

in sturdy sheet steel case,


45 pieces
Content:
39 sockets with bi-hexagon
No 50: sizes 10; 11; 12; 13;
14; 15; 16; 17; 18; 19;
20; 21; 22; 23; 24; 25;
26; 27; 28; 30; 32;
34 mm
No 50a: sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16; 1;
1 1/16; 1 1/8; 1 3/16; 1 1/4"
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

361.80

469.65

Socket set 1/2" u

in sturdy sheet steel case,


31 pieces
Content:
17 sockets with bi-hexagon
No 50: sizes 8; 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 21; 22; 24; 27;
30; 32 mm
8 INHEX sockets No 54:
sizes 4; 5; 6; 7; 8; 10; 12; 14 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510
'

Code
'

96 03 04 39
'

R
g

6090

406.90

139

Sockets, Socket Sets


52/54/25/6

1/2"
12,5

DIN
3120

ISO

1174-1

Socket set 1/2" u

876N

in sturdy sheet steel case,


31 pieces
Content:
17 sockets with hexagon No 52:
sizes 8; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22; 24; 27;
30; 32 mm
8 INHEX sockets No 54:
sizes 4; 5; 6; 7; 8; 10; 12; 14 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510
'

Code

'

96 03 02 39

6106

'

50/43/7

403.65

Socket set 1/2" u

'

in sturdy sheet steel case,


50 pieces
Content:
23 sockets with bi-hexagon No 50:
sizes 8; 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 20; 21; 22;
23; 24; 25; 26; 27; 28; 30; 32;
34 mm
7 sockets, long, No 51:
sizes 13; 17; 18; 19; 22; 24;
27 mm
2 sockets, long, with rubber insert No 51:
sizes 16 mm - 5/8", 20.8 mm - 13/16"
6 UNIFLEX sockets with hexagon No 53:
sizes 10; 13; 16; 17; 18; 19 mm
5 INHEX sockets No 54: sizes 4; 5; 6; 8; 10 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 flexible handle No 504/15
1 T-handle No 506
1 universal joint No 510

Code
96 03 03 01
'

50TX/16/5

10710

'

87N

Code
96 03 27 02
'

878.30

96 03 01 01
'

876TX

Socket set 1/2" u

140

4315

349.35

Socket set TORX 1/2" u

'

Code
'

98 81 09 09

'

8265

in sturdy sheet steel case,


39 pieces
Content:
12 sockets with hexagon
No 52: sizes 8; 10; 13; 16; 17;
18; 19; 21; 22; 24; 27; 30 mm
6 INHEX sockets No 54:
sizes 5; 6; 8; 10; 12; 14 mm
7 sockets for external TORX screws No 50TX:
sizes E10; E12; E14; E16; E18; E20; E24
9 screwdriver sockets for internal TORX screws No 54TX: sizes T20;
T25; T27; T30; T40; T45; T50; T55; T60
1 ratchet No 512
2 extensions No 509/5 (130 mm), No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

'

'

Socket set TORX 1/2" u

'

in sturdy sheet steel case,


47 pieces
Content:
19 sockets with bi-hexagon
No 50: sizes 8; 9; 10; 11; 12;
13; 14; 15; 16; 17; 18; 19; 21;
22; 24; 27; 30; 32; 34 mm
2 sockets, long, with rubber insert,
No 51: sizes 16 mm - 5/8";
20.8 mm - 13/16"
7 INHEX sockets No 54:
sizes 4; 5; 6; 7; 8; 10; 12 mm
13 combination spanners No 13:
sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

Code

619.15

'

96 03 01 36

8240

in sturdy sheet steel case,


21 pieces
Content:
7 sockets for external TORX screws
No 50TX: sizes E10; E12; E14;
E16; E18; E20; E24
9 screwdriver sockets for internal
TORX screws
No 54TX: sizes T20; T25; T27; T30; T40; T45; T50; T55; T60
1 ratchet No 512
3 extensions No 509/2 (52 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 universal joint No 510

Code

'

'

'

Socket set 1/2" u

in sturdy sheet steel case,


47 pieces
Content:
19 sockets with hexagon No 52:
sizes 8; 9; 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 21; 22; 24;
27; 30; 32; 34 mm
2 sockets, long, with rubber insert,
No 51: sizes 16 mm - 5/8";
20.8 mm - 13/16"
7 INHEX sockets No 54:
sizes 4; 5; 6; 7; 8; 10; 12 mm
13 combination spanners No 13:
sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24 mm
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

625.15

R
g

7203

524.40

89TX

Socket set TORX 1/4; 3/8; 1/2" u

50a/17/6

in sturdy sheet steel case,


35 pieces
Content:
3 sockets for external TORX screws
No 40TX: sizes E4; E5; E6
2 screwdriver sockets for internal
TORX screws No 44KTX:
sizes T8; T9
4 sockets for external TORX screws No 45TX:
sizes E7; E8; E10; E12
5 screwdriver sockets for internal TORX screws No 49TX:
sizes T10; T15; T20; T25; T27
6 sockets for external TORX screws No 50TX:
sizes E11; E14; E16; E18; E20; E24
6 screwdriver sockets for internal TORX screws No 54TX:
sizes T30; T40; T45; T50; T55; T60
7 bits o 1440: T10; 1441: T15; 1442: T20; 1443: T25; 1444: T27;
1445: T30; 1446: T40
1 bit-holder No 442
1 TORX controller: sizes E6; E7; E8; E10; E12; E14; E16; T10; T15; T20;
T25; T27; T30; T40; T45; T47; T50; T55; T60

'

Code
'

98 81 09 08
'

86TX

R
g

2765

364.00

Socket set TORX 1/4; 1/2" u

in sturdy sheet steel case,


63 pieces
Content:
9 sockets with hexagon No 40:
sizes 4; 5; 5.5; 6; 7; 8; 9; 10;
11 mm
10 sockets with hexagon No 52:
sizes 13; 16; 17; 18; 19; 21; 22;
24; 27; 30 mm
5 sockets for external TORX screws No 40TX:
sizes E4; E5; E6; E7; E8
7 sockets for external TORX screws No 50TX:
sizes E10; E12; E14; E16; E18; E20; E24
3 INHEX sockets No 44: sizes 3; 4; 5 mm
5 INHEX sockets No 54: sizes 6; 8; 10; 12; 14 mm
6 screwdriver sockets for internal TORX screws No 44KTX:
sizes T8; T9; T10; T15; T20; T25
7 screwdriver sockets for internal TORX screws No 54TX:
sizes T27; T30; T40; T45; T50; T55; T60
2 ratchets No 415, No 512
4 extensions No 405/2 (54 mm), No 509/5 (130 mm),
No 405/6 (150 mm), No 509/10 (255 mm)
2 universal joints No 407, No 510
1 drive handle No 400
2 T-handles No 404, No 506

Code
96 01 27 02
'

12,5

DIN
3120

ISO

1174-1

'

Code

'

96 03 41 25

5145

'

50ma/39/6N

331.95

Socket set 1/2" u

in sturdy sheet steel case,


45 pieces
Content:
39 sockets with bi-hexagon
No 50: sizes 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 20;
21; 22; 23; 24; 25; 26;
27; 28; 30; 32; 34 mm
No 50a: sizes 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32; 13/16; 7/8; 15/16;
1; 1 1/16; 1 1/8; 1 3/16; 1 1/4"
1 ratchet No 512
3 extensions No 509/3 (75 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

Code

'

96 03 01 40

8560

'

87aN

R
g

7045

1/2"

'

'

'

Socket set 1/2" u

in sturdy sheet steel case,


23 pieces
Content:
17 sockets with bi-hexagon No 50a:
sizes 3/8; 7/16; 1/2; 9/16;
19/32; 5/8; 11/16; 3/4; 25/32;
13/16; 7/8; 15/16; 1; 1 1/16;
1 1/8; 1 3/16; 1 1/4"
1 ratchet No 512
3 extensions No 509/2 (52 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510

720.20

547.65

Socket set 1/2" u

in sturdy sheet steel case,


40 pieces
Content:
15 sockets with bi-hexagon No 50a:
sizes 3/8; 7/16; 1/2; 9/16; 5/8;
11/16; 3/4; 13/16; 7/8; 15/16; 1;
1 1/16; 1 1/8; 1 3/16; 1 1/4"
2 sockets, long, with rubber insert,
No 51: sizes 16 mm - 5/8";
20.8 mm - 13/16"
5 INHEX sockets No 54a:
sizes 7/32; 1/4; 5/16; 3/8; 1/2"
12 combination spanners No 13a:
sizes 1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8"
1 ratchet No 512
3 extensions No 509/2 (52 mm), No 509/5 (130 mm),
No 509/10 (255 mm)
1 T-handle No 506
1 universal joint No 510
'

Code
'

96 03 41 01
'

R
g

7947

567.15

141

Sockets, Socket Sets


ES 1/2"-512/6

1/2"

TCS 50/52/30/6 MF

12,5

DIN
3120

ISO

1174-1

175 x 350 x 35 mm, 6 pieces


'

Code

'

96 83 81 13

1915

'

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

'

No 509/5

1/2"

D a 130 mm

Code

No 509/10

1/2"

D a 255 mm

96 83 03 54

'

'

'

'

1/2"

No 510
'

1/2"

No 512
'

83 81 20 29
'

145.55

No 506

350 x 350 x 70 mm, 36 pieces


g

4604

'

D a 71 mm
110

8.65

No 50

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 30 mm

No 52

1/2" a sizes 12; 13; 17; 18; 19; 20; 21;


22; 24; 27; 30; 32; 34 mm

No 54

1/2"

a sizes 5; 6; 7; 8; 10; 12 mm

No 506

1/2"

D 300 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

'

'

TCS 1/2"-512/6

'

'

'

'

'

175 x 350 x 35 mm, 6 pieces


'

423.75

1/2"

'

Empty tray

'

'

Code

'

96 83 81 75

1845

'

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

'

'

'

'

'

'

TCS 52/14/4

156.60

175 x 350 x 50 mm, 18 pieces


'

Code

'

96 83 87 81

2510

'

TCS 1/2"-512/9

No 52

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 22; 24; 27; 30 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

'

'

'

'

175 x 350 x 40 mm, 9 pieces

234.90

1/2"

'

'

Code

'

96 83 06 03

2364

'

No 506

1/2"

D 300 mm

No 509QR/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509QR/10

1/2"

D a 255 mm (2x)

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

No 514

3/4"

D 1/2" a

'

'

'

'

'

'

'

'

198.15

STAHLWILLE AS-Drive
STAHLWILLE sockets are equipped with the AS-Drive*
profile: this permits high transmission of forces to the
lands of nuts and bolts without damaging them.
No longer will you have to worry about stripping the
corners off nuts and bolts.
*Anti-Slip-Drive

142

c Sockets

55

c Sockets

56

3/4"

P Q

P Q

DIN 3124/ISO 2725-1, ASME B 107.5 M,


AS-drive and HPQ high performance steel up to size 38,
chrome plated.

DIN 3124/ISO 2725-1, ASME B 107.5 M,


extra deep, AS-drive and HPQ high performance steel up to size 36,
chrome plated.

20

DIN
3120

ISO

1174-1

'

'

Code

d1
d2
d3
L
t1
t2
mm mm mm mm mm mm mm

05 01 00 19
05 01 00 21
05 01 00 22
05 01 00 24

19
21
22
24

28.5
31
32
34

34.7
34.7
34.7
34.7

17
18
19
21

50
50
51
51

16
16
17
18.5

26
26
25.2
24.6

183
226
199
200

5
5
5
5

11.70
12.90
11.70
12.60

05 01 00 27
05 01 00 30
05 01 00 32
05 01 00 33

27
30
32
33

38.5
42
44.5
46

38
38
38
40

24
27
29
30

54
58
58
60

20
21
22
22

26.8
33.6
33
34.7

263
313
326
372

5
5
2
2

14.00
16.30
17.10
21.80

05 01 00 34
05 01 00 36
05 01 00 38
05 01 00 41

34
36
38
41

47
49.5
52
55.5

40
40
40
40

31
33
35
33

60
60
64
67

24
24
30
30

34.4
33.9
37.3
37.5

363
386
429
498

2
2
2
2

19.20
18.60
21.60
28.60

05 01 00 46
05 01 00 50
05 01 00 55
05 01 00 60

46
50
55
60

61
66
72
78

40
40
45
45

33
33
33
33

73
80
80
80

34
34
36
40

43.5 605
48.5 769
49.5 954
50.5 1025

1
1
1
1

30.50
36.00
48.50
60.00

'

'

Code

L
t1
t2
A d1 d2 d3
mm mm mm mm mm mm mm

R
g

05 02 00 22
05 02 00 24
05 02 00 27
05 02 00 30

22
24
27
30

32
34
38.5
42

34.7
34.7
38
38

19
21
24
27

90
90
90
90

40
40
40
40

64.2
63.6
62.8
65.6

374
341
443
477

5
5
5
5

29.70
28.00
30.80
34.60

05 02 00 32
05 02 00 34
05 02 00 36
05 02 00 41

32
34
36
41

44.5
47
49.5
55.5

38
40
40
40

29
31
33
38

90
90
90
90

40
40
40
40

65
64.4
63.9
58.5

526
562
620
714

2
2
2
2

36.50
38.60
42.40
52.00

'

'

i INHEX sockets

59

for socket head screws, DIN 7422, Chrome Alloy Steel, chrome plated.

'

d Sockets

55a

Code

P Q

'

05 05 00 14
05 05 00 17
05 05 00 19
05 05 00 22

SAE AS 954-E (test loads), ASME B 107.1,


AS-drive and HPQ high performance steel up to size 1 1/2",
chrome plated.

mm

L1
mm

L2
mm

d
mm

R
g

14
17
19
22

80
80
80
80

25
25
25
25

34.7
34.7
34.7
40

272
311
346
515

1
1
1
1

'

34.10
35.90
36.80
38.70

m Screwdriver sockets

59X

for trisquare socket head screws (XZN), Chrome Alloy Steel,


chrome plated.

'

d1
mm

d2
mm

d3
mm

L
mm

t1
t2
mm mm

R
g

05 41 00 40
05 41 00 42
05 41 00 44
05 41 00 46

3/4
13/16
7/8
15/16

28.5
31
33
34

34.7
34.7
34.7
34.7

18.6
19.4
21
22.5

50
51
51
51

16
16.5
18
18.5

26
25.1
24.5
24.2

176
190
240
248

2
2
2
2

14.70
15.90
15.10
15.10

05 41 00 48
05 41 00 50
05 41 00 52
05 41 00 56

1
1 1/16
1 1/8
1 1/4

37
38.5
41
44.5

38
38
38
38

24
26
27.5
30.5

52
54
57
58

20
20
20
22

24.8
26.2
32.5
32.6

251
265
297
339

2
2
2
2

15.30
16.50
18.80
19.90

05 41 00 58
05 41 00 60
05 41 00 62
05 41 00 64

1 5/16
1 3/8
1 7/16
1 1/2

46.5
48.5
50
52

40
40
40
40.5

32.1
33.7
35.3
36.8

59
59
60
64

24
24
27
30

33.1
32.7
33.2
36.8

368
375
395
415

2
2
2
2

20.90
21.90
23.80
22.60

05 41 00 66
05 41 00 67
05 41 00 68
05 41 00 69

1 5/8 56
1 11/16 58
1 3/4 59.5
1 13/16 61.5

40
40
40
40

33
33
33
33

67
70
70
73

30
32
32
34

37.5
40.5
40.5
43.5

469
524
524
585

1
1
1
1

34.00
34.90
34.80
37.10

05 41 00 70 1 7/8 63.5 40
05 41 00 72 2
67
40

33
33

76
80

34
34

45
651
48.5 757

1
1

37.70
41.50

Code
'

'

"

'

Code

size

L1
mm

L2
mm

d
mm

R
g

05 06 00 14
05 06 00 16
05 06 00 18

M14
M16
M18

90
80
100

35
25
45

34.7
34.7
34.7

281
302
310

1
1
1

'

'

33.20
34.70
39.10

Application: Flywheel and oscillation damper on Mercedes-Benz


commercial vehicles
'

143

Sockets, Socket Sets


n Screwdriver sockets

59TX

3/4"

556

for inside TORX screws, Chrome Alloy Steel, chrome plated.

Sliding head

without Bar handle No 558.

20

DIN
3120

'

ISO

Code

L
mm

d
mm

R
g

15 07 00 00

61.5

40

318

1174-1
'
'

Code

size

mm

L1
mm

L2
mm

d
mm

R
g

05 10 00 60
05 10 00 70
05 10 00 80
05 10 00 90

T60
T70
T80
T90

13.2
15.5
17.6
19.9

80
80
80
80

25
25
25
25

34.7
34.7
34.7
34.7

265
285
300
331

1
1
1
1

38.60
41.10
42.90
46.10

05 10 01 00

T100

22.1

80

25

40

474

48.40

'

'

'

Application: size T80 for MAN series M,


size T100 for MAN series F

558

21.50

Bar handle

'

Code

L
mm

d
mm

R
g

15 17 00 00

510

20

1299

'

'

25.60

'

559

Drive tools and accessories


3/4"

Extensions

DIN 3123/ISO 3316.

u, finish: Chrome Alloy Steel, chrome plated.


'

Code

size

L
mm

d
mm

R
g

15 01 00 03
15 01 00 01
15 01 00 02

4
8
16

95
200
400

35
35
35

369
696
1389

5
5
5

'

552

Ratchet

'

561

reversible, 36 teeth,
with QuickRelease safety lock,
without Bar handle No 558.

24.40
26.30
41.80

Universal joint

DIN 3123/ISO 3316.

'

Code

L
mm

b
mm

a
mm

R
g

15 11 00 00

165

70

55

1684

'

'

'

130.00

Code

L
mm

d
mm

R
g

15 02 00 00

109

40

566

'

'

5520

83.00

Spare parts set for ratchet No 552


568

Content:
1 pinion, 1 pawl, 1 lever, 1 ball, 1 compression spring, 2 screws

Q
3/4"

'

Code
'

19 05 00 00
'

Adaptor

507

63.15

socket x 1/2" plug (20 x 12.5),


maximum torque 512 N m,
DIN 3123/ISO 3316, HPQ high performance steel.

'

563

Ratchet adaptor

Code

L
mm

d
mm

R
g

15 03 00 03

55

34.7

203

'

reversible, 44 teeth.

'

569
'

Code
'

15 14 00 00
'

554

L
mm

mm

R
g

105.5

63

1257

259.00

inside x 1" plug (20 x 25),


DIN 3123/ISO 3316, HPQ high performance steel.

Code

L
mm

d
mm

R
g

15 03 00 06

61

34.7

295

'

'

'

Code

L
mm

d
mm

R
g

15 06 00 00

132

40

795

144

3/4"

'

Flexible head

with QuickRelease safety lock,


without Bar handle No 558.

'

Adaptor

'

23.90

50.00

25.60

55/10/6

Socket set 3/4" u

Socket set 3/4" u

55a/16/6

in sturdy sheet steel case,


16 pieces
Content:
10 sockets with hexagon No 55:
sizes 22; 24; 27; 30; 32; 34; 36;
41; 46; 50 mm
1 ratchet No 552
2 extensions
No 559/8 (200 mm),
No 559/16 (400 mm)
1 flexible head No 554
1 sliding head for T-handle No 556
1 bar handle No 558

3/4"

in sturdy sheet steel case,


22 pieces
Content:
16 sockets with bi-hexagon No 55a:
sizes 7/8; 15/16; 1; 1 1/16; 1 1/8;
1 1/4; 1 5/16; 1 3/8; 1 7/16; 1 1/2;
1 5/8; 1 11/16; 1 3/4; 1 13/16; 1 7/8;
2"
1 ratchet No 552
2 extensions No 559/8 (200 mm),
No 559/16 (400 mm)
1 flexible head No 554
1 sliding head for T-handle No 556
1 bar handle No 558

20

DIN
3120

ISO

1174-1

'

Code

'

'

96 05 01 04

13965

'

576.90

Code

'

96 05 41 03

16750

'

55/9/6N

Socket set 3/4" u

ES 55/6/4

in sturdy sheet steel case,


15 pieces
Content:
9 sockets with hexagon No 55:
sizes 32; 34; 36; 38; 41; 46; 50;
55; 60 mm
1 ratchet No 552
2 extensions No 559/8 (200 mm),
No 559/16 (400 mm)
1 flexible head No 554
1 sliding head for T-handle No 556
1 bar handle No 558

530 x 350 x 83 mm, 10 pieces


'

Code

'

96 83 81 74

'

'

96 05 01 03

15731

'

7875

'

Code

Socket set 3/4" u

3/4"

a sizes 34; 36; 41; 46; 50; 55 mm

No 552

3/4"

No 556

3/4"

No 558

510 mm

No 559/8

3/4"

'

'

in sturdy sheet steel case,


15 pieces
Content:
10 sockets with bi-hexagon No 55a:
sizes 1 1/16; 1 1/8; 1 1/4; 1 3/8;
1 7/16; 1 1/2; 1 5/8; 1 3/4; 1 13/16;
1 7/8"
1 ratchet No 552
2 extensions No 559/8 (200 mm),
No 559/16 (400 mm)
1 sliding head for T-handle No 556
1 bar handle No 558

'

83 81 20 89
'

409.60

No 55
'

652.40
'

55a/10/5

782.20

D a 200 mm

Empty tray

298

24.80

TCS 55/11/6

'

Code
'

530 x 350 x 90 mm, 17 pieces

'

96 05 41 01
'

12620

580.20

Code

'

96 83 02 21

10100

'

No 55

a sizes 22; 24; 27; 30; 32; 34; 36;


38; 41; 46; 50 mm

No 552

3/4"

No 556

3/4"

No 558

510 mm

No 559/8
No 559/16

3/4"
3/4"

D a 200 mm
D a 400 mm

No 568

1/2"

D 3/4" a

'

'

'

'

'

'

593.30

3/4"

145

Sockets, Socket Sets

25

DIN
3120

Drive tools and accessories

d Sockets

60

1"

1" u, finish: Chrome Alloy Steel, chrome plated.

P Q
DIN 3124/ISO 2725-1, AS-drive and HPQ high performance steel up to
size 36, chrome plated.

ISO

1174-1

882

Ratchet

reversible, 36 teeth,
with QuickRelease safety lock,
without Bar handle No 888.

'

mm

d1
mm

d2
mm

d3
mm

L
mm

t1
t2
mm mm

R
g

06 01 00 30
06 01 00 32
06 01 00 34
06 01 00 36

30
32
34
36

42.5
45
47
49.5

43
43
43
48

27
29
31
33

65
67
67
67

20
24
24
24

33.1
34.6
34
33.4

371
374
398
493

2
2
2
2

23.60
23.70
27.20
25.10

06 01 00 41
06 01 00 46
06 01 00 50
06 01 00 55

41
46
50
55

55.5
61
66
72

48
48.5
48
48

36
40
43
49

70
75
80
85

30
32
34
36

37.5
43.5
47.5
49.5

520
622
707
920

1
1
1
1

39.60
46.30
53.50
70.00

06 01 00 60

60 78

48

53

90

40

56.5 992

Code
'

'

'

1 80.50

L
mm

b
mm

a
mm

R
g

16 11 00 00

185

70

60

2000

'

'

8820

168.00

Spare parts set for ratchet No 882

Content:
1 pinion, 1 pawl, 1 lever, 1 ball,
1 compression spring, 2 screws
'

c Sockets

60

Code

Code

DIN 3124, Chrome Alloy Steel, chrome plated.

'

19 07 00 00
'

884

539

100.15

Flexible head

with QuickRelease safety lock,


without Bar handle No 888.
'

Code
'

06 01 00 65
06 01 00 70
06 01 00 75
06 01 00 80

mm

d1
mm

d2
d3
mm mm

L
t1
t2
mm mm mm

65
70
75
80

87
94
101
108

60
60
60
60

105
110
115
120

'

58
63
68
73

40
42
45
48

68.5
72.5
78.5
83.5

'

1917
2210
2525
2865

1
1
1
1

104.00
123.00
136.00
155.00

L
mm

d
mm

R
g

16 06 00 00

195

48

1800

'

'

886

116.00

Sliding head

without Bar handle No 888.

i INHEX sockets

64

Code

DIN 7422, Chrome Alloy Steel, chrome plated.


'

Code

L
mm

d
mm

R
g

16 07 00 00

80

48

605

'

'

888

'

mm

L1
mm

L2
mm

d
mm

R
g

06 05 00 14
06 05 00 17
06 05 00 19
06 05 00 22

14
17
19
22

85
85
85
90

25
25
25
25

43
43
43
48

390
417
445
661

1
1
1
1

57.50
57.50
56.50
61.00

06 05 00 24
06 05 00 27

24
27

90
90

25
25

48
49

719
827

1
1

62.00
64.00

Code
'

'

146

37.40

Bar handle

'

Code

L
mm

d
mm

R
g

16 17 00 00

700

28

3320

'

'

44.60

859

Extensions

60/6/6/882

DIN 3123/ISO 3316.

'

Code

size

L
mm

d
mm

R
g

16 01 00 01
16 01 00 02

8
16

200
410

43
43

965
1780

2
2

'

'

55.00
73.50

Socket set 1"

1"

in sturdy sheet steel case,


12 pieces
Content:
6 sockets with bi-hexagon
No 60: sizes 36; 41; 46; 50; 55;
60 mm
1 ratchet No 882
2 extensions No 859/8 (200 mm), No 859/16 (410 mm)
1 flexible head No 884
1 sliding head for T-handle No 886
1 bar handle No 888

25

DIN
3120

ISO

1174-1

'

866

Adaptor

27800

'

60/8/6/882

'

Code

L
mm

d
mm

R
g

16 03 00 05

70

43

332

'

96 06 01 01

1" socket x 3/4" plug (25 x 20),


maximum torque 1412 N m, DIN 3123/ISO 3316,
HPQ high performance steel.

'

Code
'

32.70

900.00

Socket set 1" u

in sturdy sheet steel case,


14 pieces
Content:
4 sockets with bi-hexagon No 60:
sizes 46; 50; 55; 60 mm
4 sockets with hexagon No 60:
sizes 65; 70; 75; 80 mm
1 ratchet No 882
2 extensions No 859/8 (200 mm), No 859/16 (410 mm)
1 flexible head No 884
1 sliding head for T-handle No 886
1 bar handle No 888

'

Code
'

96 06 01 03
'

R
g

30000

1380.80

147

Empty boxes and trays

No

Box
No

Box
Code

40/9/4, 40D/9/4

40/9N

220x130x42

81 25 00 19

16.30

83 01 10 12

3.20

40/13/6

40/9N

220x130x42

81 25 00 19

16.30

83 01 10 80

3.20

40/13/6QR

40/9K

220x110x40

81 25 10 09

14.30

83 01 11 82

3.20

40/44/17/5

40/9N

220x130x42

81 25 00 19

16.30

83 01 10 81

3.20

40/44/17/5QR

40/9K

220x110x40

81 25 10 09

14.30

83 02 10 84

3.20

40/23/7,
40D/23/7

45/1N

315x134x46

81 26 00 11

17.30

83 01 10 16

4.00

40/23/6N,
40D/23/6

40/9N

220x130x42

81 25 00 19

16.30

83 01 10 14

3.20

40/24/6

40/9K

220x110x40

81 25 10 09

14.30

83 01 10 82

3.90

40/24/6QR

40/9K

220x110x40

81 25 10 09

14.30

83 01 10 83

3.90

40ma/25/8

40/7N

405x178x45

81 25 00 14

27.80

83 01 10 35

5.80

40/45/36/12

40/7N

405x178x45

81 25 00 14

27.80

83 01 10 11

5.80

40/52/27/11

50/4N

446x205x54

81 27 00 34

32.00

83 01 10 04

12.00

40TX/44KTX/15/6

40/9N

220x130x42

81 25 00 19

16.30

83 01 10 07

3.30

88TX

45/1N

315x134x46

81 26 00 11

17.30

83 02 10 17

4.00

89TX

50/3N

405x178x54

81 27 00 13

30.40

83 09 10 13

5.80

86TX

50/6N

470x234x74

81 27 00 19

44.90

83 01 10 02

12.00

40a/9/4,
40aD/9/4

40/9N

220x130x42

81 25 00 19

16.30

83 01 10 13

3.20

40aD/12/7QR

40/9N

220x130x42

81 25 00 19

16.30

83 01 11 16

9.45

40aD/30/7QR

40/7N

405x178x45

81 25 00 14

27.80

83 01 11 12

6.30

40aD/8/1H

40/9K

220x110x40

81 25 10 09

14.30

83 01 11 07

4.25

4008/27/1

40/9N

220x130x42

81 25 00 19

16.30

83 18 00 01

4.10

45/11/4,
456/11/4

45/1N

315x134x46

81 26 00 11

17.30

83 02 10 13

4.00

45/14/5i,
456/14/5i

45/1N

315x134x46

81 26 00 11

17.30

83 02 10 80

4.05

45/14/5iQR

45/1K

315x115x45

81 26 10 01

15.60

83 02 10 81

4.05

45/13/5N,
456/13/5

45/1N

315x134x46

81 26 00 11

17.30

83 02 10 45

4.00

45ma/28/5

40/7N

405x178x45

81 25 00 14

27.80

83 02 10 27

5.80

45/49/19/5,
456/49/19/5

40/7N

405x178x45

81 25 00 14

27.80

83 02 10 21

5.80

89N

50/6N

470x234x74

81 27 00 19

44.90

83 02 01 18

11.80

45/41/9

50/5

530x265x50

81 27 00 05

49.80

83 02 02 02

12.90

45TX/7

83 06 00 15

2.35

'

49TX/8

mm

Tray
Code

83 06 00 14

4.40

45TX/49TX/15/5

40/7N

405x178x45

81 25 00 14

27.80

83 02 10 19

4.05

45/49/32/5TX

40/7N

405x178x45

81 25 00 14

27.80

83 02 10 09

5.90

45a/12/5

45/1N

315x134x46

81 26 00 11

17.30

83 02 10 06

4.00

45a/14/8QR

50/4N

446x205x54

81 27 00 34

32.00

83 02 10 12

11.30

45a/22/8QR

50/4N

446x205x54

81 27 00 34

32.00

83 02 11 12

11.30

45a/33/13

50/5

530x265x50

81 27 00 05

49.80

83 02 02 13

12.90

52/9/3

50/3N

405x178x54

81 27 00 13

30.40

83 03 04 25

11.80

50/12/3,
52/12/3

50/3N

405x178x54

81 27 00 13

30.40

83 03 04 12

11.80

51/8

50/1N

315x134x54

81 27 00 11

22.60

83 03 04 02

4.90

54/10

40/9N

220x130x42

81 25 00 19

16.30

83 03 14 03

4.55

54/12

45/1N

315x134x46

81 26 00 11

17.30

83 03 14 09

4.40

54CV/9

40/9N

220x130x42

81 25 00 19

16.30

83 03 24 09

4.55

3054X/54X/8

40/9N

220x130x42

81 25 00 19

16.30

83 03 26 12

6.10

148

No

Box
No

Box
Code

54/8/4

50/3N

405x178x54

81 27 00 13

30.40

83 03 04 13

14.30

52/16/5

50/4N

446x205x54

81 27 00 34

32.00

83 03 04 09

11.80

50/16/6,
52/16/6

50/4N

446x205x54

81 27 00 34

32.00

83 03 14 80

11.80

52/16/6QR

50/4K

440x185x55

81 27 10 04

24.50

83 03 14 81

11.80

50/22/6,
52/22/6

50/4N

446x205x54

81 27 00 34

32.00

83 03 04 07

13.40

50ma/39/6N

50/5

530x265x50

81 27 00 05

49.80

83 03 14 26

13.00

50/54/25/6,
52/54/25/6

50/6N

470x234x74

81 27 00 19

44.90

83 03 14 17

13.20

50/43/7

50/5

530x265x50

81 27 00 05

49.80

83 03 05 11

12.90

87N, 876N

50/6N

470x234x74

81 27 00 19

44.90

83 09 00 11

23.90

50TX/7

83 06 00 09

3.20

50TX/8

40/9N

220x130x42

81 25 00 19

83 03 24 11

4.55

54TX/9

83 06 00 10

3.20

54TX/10

40/9N

220x130x42

81 25 00 19

83 03 14 02

4.55

54TXB/9

83 06 00 10

3.20

54TXB/10

40/9N

220x130x42

81 25 00 19

16.30

83 03 14 02

4.55

50TX/16/5

50/4N

446x205x54

81 27 00 34

32.00

83 03 14 13

11.30

876TX

50/6N

470x234x74

81 27 00 19

44.90

83 09 10 11

12.90

50a/17/6

50/4N

446x205x54

81 27 00 34

32.00

83 03 04 41

11.80

87aN

50/6N

470x234x74

81 27 00 19

44.90

83 09 00 12

23.90

55/10/6

55/7

575x220x86

81 29 00 08

57.50

83 04 00 02

19.60

55/9/6N

55/7

575x220x86

81 29 00 08

57.50

83 04 00 01

19.60

55a/10/5

55/6

520x160x86

81 29 00 07

50.00

83 04 00 03

17.90

55a/16/6

55/7

575x220x86

81 29 00 08

57.50

83 04 00 04

19.60

60/6/6/882

60/1

785x173x90

81 30 00 01

90.50

60/8/6/882

60/2

785x200x122

81 30 00 02

118.00

'

mm

16.30

16.30

Tray
Code

149

STAHLWILLE
Certified to DIN EN ISO 9001.

After STAHLWILLE was certied, as one of the very rst companies


back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also
certied to DIN EN ISO 9001 in 1992.

IMPACTSockets, Machine actuated

IMPACTSockets, Machine actuated

IMPACTSockets, Machine actuated.


STAHLWILLE IMPACT

Tried-and-tested components for professional use in conjunction with compressed


air and electric power and impact screwdrivers. All the tools in the IMPACT
product range have been designed for particularly heavy-duty work on a
day-to-day basis. Used as additional tools in conjunction with power impact tools
they feature extremely good load-bearing capacity and very long lifetimes.
The name IMPACT is a by-word in all fields of industry and the trades for leadingedge quality made by professionals for professionals.

STAHLWILLE IMPACT sockets are extraordinarily tough. Their remarkable fitting


accuracy, which is due to very tight tolerances, guarantees minimum loss of force
as the impact is transferred from the impact screwdriver to the socket insert and
also dramatically improved durability.

STAHLWILLE IMPACT sockets are made from high-grade Chrome Alloy Steel.
They are hardened in an oil bath to ensure they are normalised and non-warping,
making them extremely accurate tools with very close tolerances.

IMPACT quality is available individually or in sets


Whatever else the professional might want in a tool, there is no compromising
on the quality. The extensions, adaptors, joints and sockets will
always fit perfectly. Combine them as you need them.
Slot them together. Done.

Joints
1 Deep groove for O-ring to improve grip and
2 straight-through central bore for locking pin.
3 Bevelled edge facilitates attachment.
4 Recessed keyway adaptors with spring-loaded pins on the square drive,
e.g. No 3116, 3216.

152

4
No 2309K
e.g. 1/2'' wheel nut socket (sizes 17; 19 and 20.8 mm)
with plastic sleeves, specially for sensitive alloy wheels.

STAHLWILLE IMPACT sockets

STAHLWILLE IMPACT sockets

No 50IMP/6/2

153

IMPACTSockets, Machine actuated

IMPACTSockets, Machine actuated.


STAHLWILLE range of BITS

STAHLWILLE range of BITS uncompromisingly attractive.


Reliable screwdriver inserts and adaptors in individual sizes or as sets for power
screwdrivers or manual use.

The bit that fits always


That is why STAHLWILLE offers such a range of BITS for flat-bladed, Phillips,
POZIDRIV/SUPADRIV, internal TORX, TORX PLUS, internal serration, internal
hex drive, TRI-WING, TORQ-SET screws and recessed 5-star screws with a central
pin if required, also available in sets with corresponding tightening tools
e.g. anticlockwise and clockwise ratcheting bit-holder. High-grade special steel alloys
and special hardening processes guarantee optimum torquing and long service
lifetimes.

Get a grip on it: sturdy bit-holders and ratchets etc.


STAHLWILLE BITS are, of course, also suitable for manual use, e.g. in conjunction
with the corresponding bit-holders, ratchets, magazine holders, switchable ratchets
and TORSIOMAX torque screwdrivers.

No 4008/27/1R

154

No 1201

2
r

k
Slotted

l
Phillips-Recess

i
Internal serration
XZN

n
POZIDRIV
SUPADRIV

s
Internal hex

o
Internal TORX

TORX PLUS

t
TRI-WING

_
Internal TORX
with hollow point

TORQ-SET

5-star
with hollow point

BITS screwdriver inserts from


STAHLWILLE guarantee
minimum transmission losses.

STAHLWILLE BITS are also


suitable for use with heavy-duty
power screwdrivers.

e.g. bit holder No 4007


for BITS screwdriver inserts
with external 1/4'' hex

e.g. ratchet No 415SGB with


1/4'' internal hex drive, reversible

155

IMPACT Sockets, Machine actuated


1/2"

IMPACT sockets and accessory tools


for power drivers

50IMP/6/2

IMPACT-Set

8 pieces
Content:
6 Sockets No 50IMP:
sizes 13; 17; 19; 21; 22; 24 mm
1 Extension No 509/5IMP
1 Universal Joint No 510IMP
for power drivers

DIN
3121

ISO

1174-2

'

Thin walled yet exceptionally strong.


STAHLWILLE IMPACT sockets made from high quality Chrome Vanadium
Steel. Heat treated and oil quenched to avoid stresses, distortions and to
maintain very close tolerances. Dimensional accuracy ensures minimal
power transmission losses and drastically increases durability.

Code

'

96 23 01 01

1800

'

c IMPACT sockets

51IMP
1/2"

157.85

a-drive, for power drivers, extra deep, Chrome Alloy Steel,

gunmetal finish.

IMPACT sockets
1/2"

a-drive

c IMPACT sockets

50IMP
1/2"

'

a-drive, DIN 3129/ISO 2725-2, for power drivers,

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

23 02 00 13
23 02 00 15
23 02 00 16
23 02 00 17

13
15
16
17

20.8
23.5
24.8
26.2

25
30
30
30

85
85
85
85

68.5
68
68
68

222
360
338
318

5
5
5
5

22.40
22.40
22.40
21.60

23 02 00 18
23 02 00 19
23 02 00 21
23 02 00 22

18
19
21
22

27.5
28.8
31.3
32.5

30
30
30
30

85
85
85
85

68
67.5
66.5
66.5

309
292
291
323

5
5
5
5

22.40
21.60
25.50
25.60

23 02 00 24
23 02 00 27

24
27

35
38.8

30
30

85
85

66
65

335
385

5
5

24.90
29.60

Code

Chrome Alloy Steel, gunmetal finish.

'

'

d1
mm

d2
mm

L
mm

t
mm

mm

23 01 00 08
23 01 00 10
23 01 00 11
23 01 00 12
1

8U
10
11
12 U

14.3
16.8
18.1
19.5

25
25
25
25

38
38
38
38

21.5
21.5
21.5
21.5

86
89
88
89

10
10
10
10

9.70
9.40
9.40
9.40

23 01 00 13
23 01 00 14
23 01 00 15
23 01 00 16

13
14
15
16

20.8
22.1
23.5
24.8

25
25
30
30

38
38
38
38

21.5
21.5
21.5
21

85
86
132
130

10
10
10
10

9.40
9.40
9.95
10.20

23 01 00 17
23 01 00 18
23 01 00 19
23 01 00 21

17
18
19
21

26.2
27.5
28.8
31.3

30
30
30
30

38
38
40
40

21
20.5
22.5
21.5

132
130
133
135

10
10
10
10

10.20
10.20
9.70
11.70

23 01 00 22
23 01 00 23
23 01 00 24
23 01 00 25

22
23 U
24
25 U

32.5
33.8
35
36.3

30
30
30
30

42
40
45
44

21.5
23
25
25

141
150
164
170

10
5
5
5

11.70
11.70
11.40
12.40

23 01 00 27
23 01 00 30
23 01 00 32

27
30 U
32 U

38.8
42
44

30
30
30

50
50
50

25
34
34

190
170
178

5
5
5

14.30
14.90
14.90

'

'

156

Code

'

TCS 50IMP/51IMP/19

170 x 350 x 50 mm, 19 pieces


'

Code

'

96 83 87 77

3960

'

a sizes 10; 13; 15; 16; 17; 18; 19;


21; 22; 24; 27 mm

No 51IMP

1/2" a sizes 13; 15; 17; 18; 19; 21; 22;


24 mm

'

'

328.45

No 50IMP

1/2"

c IMPACT sockets

2309

i IMPACT INHEX sockets

54IMP

a-drive, for power drivers, extra deep, with reduced outside diameter,
Chrome Alloy Steel, gunmetal finish.

1/2"

1/2"
DIN

a-drive, for hexagon socket head screws, for power drivers,


Chrome Alloy Steel, gunmetal finish.

1/2"

3121

ISO

1174-2

L1
d
L2

'

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

17
19
20.8
22

25.7
28.2
30.7
32

30
30
30
30

85
85
85
85

68
67.5
66.5
66.5

242
257
272
311

5
5
5
5

Code
'

23 09 00 17
23 09 00 19
23 09 02 08
23 09 00 22
'

27.50
27.50
30.70
30.70

for wheel nuts


'

'

25
25
25
25

58
59
60
61

5
5
5
5

9.95
9.95
9.95
10.70

23 05 00 10
23 05 00 12
23 05 00 14
23 05 00 17

10
12
14
17

40
42
43
45

17
19
20
22

25
30
30
30

67
111
118
134

5
5
5
5

10.90
12.40
13.10
15.00

23 05 00 19

19

50

27

30

164

21.60

p IMPACT sockets

2308TX
1/2"

Code
96 83 81 62

1145

'

1/2"

No 2309

a-drive, external TORX, for power drivers, Chrome Alloy Steel,

gunmetal finish.

'

15
15
15
15

mm

'

'

d
mm

38
38
38
38

175 x 175 x 40 mm, 4 pieces

L2
mm

5
6
7
8

'

ES 2309/4

L1
mm

23 05 00 05
23 05 00 06
23 05 00 07
23 05 00 08

Code

120.70

a sizes 17; 19; 20.8 mm-13/16";

22 mm

'

83 81 20 80
'

Empty tray

55

4.30
'

c Wheel nut sockets

2309K

a-drive, with plastic sleeve.


Sleeve extension protects not only
wheel bolts and nuts but also the
wheel and holes.

1/2"

Code

size

mm

d1
mm

d2
mm

L
mm

R
g

23 08 00 10
23 08 00 12
23 08 00 14
23 08 00 16

E10
E12
E14
E16

9.4
11.1
12.9
14.7

14
15.9
17.7
20

25
25
25
25

38
38
38
38

67
73
73
77

10
10
10
10

23 08 00 18
23 08 00 20
23 08 00 24

E18
E20
E24

16.6
18.4
22.1

22
24.5
30

30
30
30

38
38
41.2

'

'

Code

mm

L
mm

mm

R
g

23 09 10 17
23 09 10 19
23 09 12 08

17
19
20.8

87
87
87

32
32
32

242
250
265

1
1
1

'

'

'

34.70
36.30
36.00

10 14.70
10 15.90
10 19.30

n IMPACT sockets

2307TX
1/2"

115
120
149

13.40
13.70
13.50
13.60

a-drive, inside TORX, for power drivers, Chrome Alloy Steel,

gunmetal finish.

ES 2309K/3

'

Code

size

23 07 00 30
23 07 00 40
23 07 00 45
23 07 00 50

T30
T40
T45
T50

23 07 00 55
23 07 00 60

T55
T60

'

175 x 175 x 40 mm, 3 pieces


'

Code

'

96 83 82 60

800

'

111.30

'

No 2309K
'

83 81 20 80
'

Empty tray

1/2"

d
mm

L
mm

R
g

5.5
6.6
7.8
8.8

25
25
25
25

40
40
40
40

57
58
59
57

5
5
5
5

18.90
20.50
20.60
20.70

11.2
13.2

25
25

40
40

61
66

5
5

26.50
26.50

mm

a sizes 17; 19; 20.8 mm-13/16"


55

4.30

157

IMPACT Sockets, Machine actuated


1/2"
3/4"
DIN
3121

Accessory tools for IMPACT sockets

IMPACT sockets

a square drive
outside D E 12.5, inside a G 12.5
1/2"

3/4"

a-drive

a-drive DIN 3129/ISO 2725-2, for power drivers,


Chrome Alloy Steel, gunmetal finish.

3/4"

ISO

1174-2

509IMP

Extensions

'

'

Code
'

33 01 00 01
33 01 00 02
33 01 00 03

size

L
mm

d
mm

R
g

2
5
10

52
130
255

30
30
30

151
271
452

5
5
5

'

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

25 01 00 17
25 01 00 18
25 01 00 19
25 01 00 21

17
18
19
21

29
30.5
32
35

44
44
44
44

48
48
48
50

23
23
23
25

365
345
359
375

5
5
5
5

23.70
23.60
23.70
24.80

25 01 00 22
25 01 00 24
25 01 00 27
25 01 00 28

22
24
27
28

36.5
39.5
43.5
45

44
44
44
44

50
50
51
54

25
24.5
24.5
27

377
382
387
417

5
5
5
5

24.80
25.20
26.80
26.80

25 01 00 29
25 01 00 30
25 01 00 32
25 01 00 33

29
30
32
33

46
47.4
49.9
51.5

44
44
44
44

54
54
54
54

26.5
26.5
26
25.5

425
438
456
477

5
2
2
2

28.00
27.10
31.20
33.90

25 01 00 34
25 01 00 36
25 01 00 38
25 01 00 41

34
36
38
41 U

52.4
54.9
58
57

44
44
44
44

54
57
58
59

29
32
33
34

490
545
592
746

2
2
2
1

35.80
35.30
41.70
42.20

44

64

36.5

746

53.00

'

21.50
25.30
31.80

510IMP

Universal joint

1
'

c IMPACT sockets

55IMP

Finish: Chrome Alloy Steel, gunmetal finish

Code

L
mm

d
mm

R
g

33 02 00 00

52

32

180

'

'

48.40

25 01 00 46
'

46 U 67

Adaptors

c IMPACT sockets

56IMP
3/4"

a-drive, for power drivers, extra deep, Chrome Alloy Steel,

gunmetal finish.

'

Code
'

33 03 00 02
33 03 00 05

No

inside outside
a"
D"

513IMP
514IMP

'

1/2
1/2

3/8
3/4

L
mm

d
mm

R
g

37
49

30
30

109
174

5
5

17.80
20.50

'

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

25 02 00 17
25 02 00 19
25 02 00 21
25 02 00 22

17 U
19 U
21
22

32
32
35
36.5

44
44
44
44

100
100
100
100

75
75
75
75

783
779
864
854

2
2
2
2

36.50
36.50
37.80
37.80

25 02 00 24
25 02 00 27
25 02 00 30
25 02 00 32

24
27
30
32

39.5
43.5
47.4
49.9

44
44
44
44

100
100
100
100

74.5
72.5
72.5
72

838
800
860
922

2
2
2
2

37.80
39.20
45.30
45.90

25 02 00 34
25 02 00 36
25 02 00 41
25 02 00 46

34
36
41 U
46 U

52.4
54.9
57
67

44
44
44
44

100
100
100
100

71.5
71
75
75

983
1038
899
1427

2
2
1
1

56.00
59.00
61.50
70.00

'

Rubber rings
'

Code

No

39 01 19 40
39 01 24 40

5091/1IMP )
5091/2IMP 2)

'

'

1
1

10
10

2.35
2.35

) for Socket sizes 814 mm, TORX size E10E16, size T30T60
) for Socket sizes 1532 mm, TORX size E18E24 and accessories

2
'

Connecting pins

'

'

Code

No

39 02 20 30
39 02 25 30

5092/1IMP )
5092/2IMP 2)

'

'

1
2

10
10

c IMPACT sockets

2509
1.55
1.00

a-drive, for power drivers, extra deep, with reduced diameter,


Chrome Alloy Steel, gunmetal finish.

3/4"

) for Socket sizes 814 mm, TORX size E10E16, size T30T60
) for Socket sizes 1532 mm, TORX size E18E24 and accessories

1
2
'

'

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

25 09 00 27
25 09 00 30
25 09 00 32
25 09 00 33

27
30
32
33

40.5
44.3
46.8
48

44
44
44
44

100
100
100
100

72.5
72.5
72
72

672
728
778
803

2
2
2
2

'

'

for Trilex wheels


'

158

50.50
54.50
58.00
59.00

Accessory tools for IMPACT sockets

IMPACT sockets

a square drive
outside D F 20, inside a H 20

3/4"
1"

1" a-drive

3/4"

DIN

c IMPACT sockets

60IMP

Finish: Chrome Alloy Steel, gunmetal finish

3121

1" a-drive, DIN 3129/ISO 2725-2, for power drivers,


Chrome Alloy Steel, gunmetal finish.

560IMP

ISO

1174-2

Extensions

'

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

26 01 00 24
26 01 00 27
26 01 00 30
26 01 00 32

24
27
30
32

41.5
45
49
51.5

54
54
54
54

58
60
62
63

28
30
32
32

638
654
688
694

2
2
2
2

33.90
32.10
38.80
37.50

26 01 00 33
26 01 00 36
26 01 00 38
26 01 00 41

33
36
38
41

52.5
56.5
59
63

54
54
54
54

63
67
70
70

31.5
34.5
37
36.5

692
754
836
892

2
2
2
2

39.60
45.80
48.50
49.20

26 01 00 42
26 01 00 46
26 01 00 50
26 01 00 55

42
46
50
55

64.5
69.5
74.5
81

54
54
54
54

73
76
82
87

39
41
52
57

970
1106
1362
1669

1
1
1
1

58.50
59.00
74.00
92.00

26 01 00 60
26 01 00 65
26 01 00 70
26 01 00 75

60
87
65 U 92
70 U 96
75 U 100

54
54
54
86

91
85
88
92

61
55
58
62

1960
1678
1803
2674

1
1
1
1

107.00
113.00
118.00
130.00

86

97

67

2949

1 167.00

'

Code
'

35 01 00 01
35 01 00 02
35 01 00 03

size

L
mm

d
mm

R
g

7
10
13

180
250
330

44
44
44

805
1051
1305

5
5
5

'

'

65.50
74.50
88.50

561IMP

Universal joint

'

Code

L
mm

d
mm

R
g

35 02 00 00

99

44

657

'

'

78.00

26 01 00 80
'

Adaptors

80 U 105

c IMPACT sockets

66IMP

1" a-drive, for power drivers, extra deep, Chrome Alloy Steel,
gunmetal finish.
'

inside outside L
d
a"
D " mm mm

Code

No

35 03 00 03
35 03 00 06

568IMP
569IMP

'

'

3/4
3/4

1/2

56
65

44
44

R
g

335
477

5
5

29.40
33.70
'

5591IMP

Rubber ring
R

'

39 01 36 50
'

10

2.55

for sockets and accessories


'

5592IMP

Connecting pin

'

39 02 35 40
'

for sockets and accessories


'

d1
mm

d2
mm

L
mm

t
mm

R
g

26 02 00 24
26 02 00 27
26 02 00 30
26 02 00 32

24
27
30
32

41.5
45
49
51.5

54
54
54
54

110
110
110
110

80
80
79.5
79

1431
1393
1338
1296

2
2
2
2

53.50
54.50
57.50
59.50

26 02 00 33
26 02 00 36
26 02 00 38
26 02 00 41

33
36
38
41

52.5
56.5
59
63

54
54
54
54

110
110
110
110

78.5
78
77
76

1274
1312
1355
1504

2
2
2
2

63.50
63.00
67.50
71.50

26 02 00 46

46

69.5

54

110

72

1711

90.50

'

Code

mm

'

'

Code

Code

'

10

c IMPACT sockets

2609

1.10

1" a-drive, for power drivers, extra deep, with reduced outside diameter,
Chrome Alloy Steel, gunmetal finish.

'

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

26 09 00 27
26 09 00 30
26 09 00 32
26 09 00 33

27
30
32
33

42.3
46
48.5
49.8

54
54
54
54

110
110
110
110

80
79.5
79
78.5

1001
1047
1015
1102

2
2
2
2

'

'

61.50
68.50
72.00
72.00

for wheel nuts


'

159

IMPACT Sockets, Machine actuated


1"
1 1/2"
DIN

3121

Accessory tools for IMPACT sockets

IMPACT sockets

1" a square drive


outside D F 25, inside a H 25
Finish: Chrome Alloy Steel, gunmetal finish

1 1/2" a-drive

c IMPACT sockets

70IMP

ISO

1174-2

859IMP

1 1/2" a-drive, DIN 3129/ISO 2725-2, for power drivers,


Chrome Alloy Steel, gunmetal finish.

Extensions

'

Code
'

36 01 00 01
36 01 00 02

size

L
mm

d
mm

R
g

7
13

180
330

54
54

1361
2168

2
2

'

93.00
120.00
'

871IMP

Universal joint

Code

L
mm

d
mm

R
g

36 02 00 00

125

54

1244

'

'

Adaptors

L
mm

t
mm

R
g

86
86
86
86

89
92
96
101

42
50
54
59

2482
2743
3249
3541

1
1
1
1

102.00
125.00
139.00
189.00

27 01 00 75
27 01 00 80
27 01 00 85
27 01 00 90

75
80
85
90

109
115
121
130

86
86
86
86

105
110
116
118

63
68
74
76

3746
4162
4661
5382

1
1
1
1

226.00
264.00
280.00
306.00

27 01 00 95 95
27 01 01 00 100
27 01 01 05 105
27 01 01 10 110

135
140
150
155

127
127
127
127

118
125
125
137

76
83
83
95

7500
8000
9000
10500

1
1
1
1

467.00
523.00
583.00
646.00

27 01 01 15 115
27 01 01 20 120

160
165

127
127

137
145

95
103

10500
12000

1 646.00
1 719.00

136.00

d2
mm

86
92
100
105

d1
mm

55
60
65
70

'

'

27 01 00 55
27 01 00 60
27 01 00 65
27 01 00 70

Code

mm

'

Accessory tools for IMPACT sockets


'

inside outside L
d
mm mm
a"
D"

Code

No

36 03 00 07
36 03 00 05

865IMP U 1
866IMP
1

'

'

6091IMP

1 1/2
3/4

85
70

54
54

R
g

986
565

1
2

90.50
55.00

759IMP

Rubber ring
R

'

39 01 48 50
'

10

Extensions

'

Code

1 1/2" a square drive


outside D F 40, inside a H 40
Finish: Chrome Alloy Steel, gunmetal finish

3.20

for sockets and accessories


'

'

6092IMP

Connecting pin

'

Code
'

39 02 50 50
'

Code

size

L
mm

d
mm

R
g

37 01 00 01
37 01 00 02
37 01 00 03

10
13
15

254
330
381

86
86
86

5500
7000
8000

2
1
1

'

R
g

10

1.65

'

299.00
385.00
435.00

for sockets and accessories


'

771IMP

Universal joint

'

Code

L
mm

d
mm

R
g

37 02 00 00

125

86

4197

'

'

160

416.00

Accessory tools for IMPACT sockets

Adaptors

1 1/2"
2 1/2"

2 1/2" a square drive


outside D F 63, inside a H 63
Finish: Chrome Alloy Steel, gunmetal finish

DIN

3121

ISO

1174-2

860IMP

'

inside
a"

Code

No

36 03 00 06
37 03 00 06

867IMP 1) 11/2
768IMP U 11/2

'

'

outside L
d
mm mm
D"
1
2 1/2

95
93

86
86

2300
3142

1
1

351.00
268.00

Extensions

) also for MULTIPOWER No MP300-5000 (page 205)

1
'

Rubber rings

'

'

Code

No

39 01 38 70
39 01 38 75

7091/1IMP 1)
7091/2IMP 2)

'

'

Code

size

L
mm

d
mm

R
g

38 01 00 01
38 01 00 02
38 01 00 03

12
18
24

305
457
610

127
127
127

16000
22000
28500

1
1
1

'

15
38

1
1

3.60
3.60

) for Socket sizes 5590 mm and accessories


) for Socket sizes 95120 mm

'

868IMP

2
'

807.00
1152.00
1416.00

Adaptors

Connecting pins

'

Code

No

39 02 38 70
39 02 38 75

7092/1IMP 1)
7092/2IMP 2)

'

'

16
25

1
1

1.55
1.55

) for Socket sizes 55.90 mm and accessories


) for Socket sizes 95120 mm

'

2
'

Code
'

IMPACT sockets

38 03 00 05
'

2 1/2" a-drive

8091/1IMP

c IMPACT sockets

80IMP

inside
a"
2

outside
D"

1/2

1/2

L
mm

d
mm

R
g

138

127

7000

560.00

Rubber ring

U
'

2
a-drive, DIN 3129/ISO 2725-2, for power drivers,
Chrome Alloy Steel, gunmetal finish.
1/2"

Code
'

39 01 63 95
'

37

10

7.70

for sockets and accessories


'

8092/1IMP

Connecting pin

U
'

Code
'

39 02 63 97
'

R
g

42

3.60

for sockets and accessories


'

'

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

75
80
85
90

115
115
127
135

127
127
127
127

125
125
130
132

67
67
67
74

7500
7000
8000
8000

1
1
1
1

593.00
609.00
667.00
751.00

28 01 00 95 95
28 01 01 00 100
28 01 01 05 105
28 01 01 10 110

140
145
150
160

127
127
127
127

132
141
141
150

74
83
83
92

8000
9000
9000
11000

1
1
1
1

807.00
856.00
922.00
1037.00

28 01 01 15 115
28 01 01 20 120

165
170

127
127

150
158

92
100

11000
12000

1
1

1152.00
1218.00

Code
'

28 01 00 75
28 01 00 80
28 01 00 85
28 01 00 90
1

'

161

IMPACT Sockets, Machine actuated


k BITS

m BITS

DIN 3128, for Phillips screws.

for tri-square socket head screws


(XZN).
'

outside
Code

'

R
g

3
3
5
5

5
5
10
10

3.90
3.90
1.65
0.95

000
00
0
1

C4
C4
C 6.3
C 6.3

1/4
1/4

28
28
25
25

1222
1223
1231
1232

2
3
1
2

C 6.3
C 6.3
C8
C8

1/4
1/4
5/16
5/16

25
25
32
32

5
5
9
10

10
10
10
10

0.95
0.95
3.00
3.00

1233
1234

3
4

C8
C8

5/16
5/16

32
32

10
12

10
10

3.00
3.20

08 00 00 00
08 00 00 01
08 01 00 00
08 01 00 01

1218
1219
1220
1221

08 01 00 02
08 01 00 03
08 03 00 01
08 03 00 02
08 03 00 03
08 03 00 04

L
mm

No

outside
"

Code
'

PhillipsRecess

'

'

No

size

"

08 20 00 04
08 20 00 10
08 20 00 11
08 20 00 12

1350
1356
1357
1358

M4
M5
M6
M8

C 6.3
C 6.3
C 6.3
C8

1/4
1/4
1/4
5/16

08 20 00 13
08 20 00 14

1359
1360

M10
M12

C8
C8

5/16
5/16

'

L
mm

R
g

25
25
25
28

4
5
5
10

10
10
10
10

3.15
3.10
3.10
3.60

38
38

15
20

10
10

4.55
5.05

outside E DIN 3126/ISO 1173


DIN 65254 (M4, M5, M6)
Application: No 1350, size M4, for door lock attachment on the Audi TT,
VW Golf, Bora, Passat B5, Lupo, New Beetle
'

n BITS

outside E DIN 3126/ISO 1173


Phillips-Recess DIN 5260
extra hard for self tapping and other hardened screws.

for inside TORX screws

'

'

l BITS
4
POZIDRIV/
SUPADRIV

Code

No

08 05 00 01
08 05 00 02
08 05 00 03

PZ1221
PZ1222
PZ1223

'

'

1
2
3

"

L
mm

R
g

C 6.3
C 6.3
C 6.3

1/4
1/4
1/4

25
25
25

5
5
6

10
10
10

outside

outside E DIN 3126/ISO 1173

r BITS screwdrivers
DIN 3127/ISO 2351, for slotted screws.

1/4

3
3
3
5

5
5
5
10

3.85
3.85
3.85
3.75

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

26
26
26
26

5
5
5
5

10
10
10
10

3.45
3.45
3.45
3.30

3.3
3.8
4.4
5.0

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

26
26
26
26

5
5
6
6

10
10
10
10

3.30
3.30
3.20
3.20

T 30
T 40
T 45
T 27

5.5
6.6
7.8
5.0

C 6.3
C 6.3
C 6.3
C8

1/4
1/4
1/4
5/16

26
26
26
35

6
7
8
11

10
10
10
10

3.20
3.20
3.95
5.05

1431
1432
1433
1434

T 30
T 40
T 45
T 50

5.5
6.6
7.8
8.8

C8
C8
C8
C8

5/16
5/16
5/16
5/16

35
35
35
35

11
12
14
14

10
10
10
10

5.05
5.50
5.50
5.80

1435

T 55 11.2

C8

5/16

35

20

10

6.00

08 13 00 03
08 13 00 04
08 13 00 05
08 13 00 06

1407
1408
1409
1410

T3
T4
T5
T6

1.1
1.3
1.3
1.6

C4
C4
C4
C 6.3

08 13 00 07
08 13 00 08
08 13 00 09
08 13 00 10

1411
1412
1413
1414

T7
T8
T9
T 10

2.0
2.3
2.5
2.7

08 13 00 15
08 13 00 20
08 13 00 25
08 13 00 27

1415
1416
1417
1418

T 15
T 20
T 25
T 27

08 13 00 30
08 13 00 40
08 13 00 45
08 14 00 27

1419
1420
1421
1430

08 14 00 30
08 14 00 40
08 14 00 45
08 14 00 50
08 14 00 55

'

28
28
28
26

mm

0.95
0.95
0.95

size

'

L
mm

No

'

for POZIDRIV/SUPADRIV screws, extra hard.

'

'

L
mm

R
g

1/4

28
28
28
39

3
3
3
5

5
5
5
10

4.10
4.20
4.10
3.20

1/4
1/4
1/4
1/4

39
39
39
39

6
6
6
6

10
10
10
10

3.25
3.20
3.25
3.20

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

39
39
39
39

7
8
9
12

10
10
10
10

3.25
3.20
3.20
3.45

1.6 x 8.0
1.6 x 10.0
0.8 x 5.5
1.0 x 5.5

C 6.3
C 6.3
C8
C8

1/4
1/4
5/16
5/16

39
39
41
41

12
16
10
11

10
10
10
10

3.35
3.75
3.65
3.75

1182
1183
1184
1185

1.2 x 6.5
1.2 x 8.0
1.6 x 8.0
1.6 x 10.0

C8
C8
C8
C8

5/16
5/16
5/16
5/16

41
41
41
41

13
15
15
19

10
10
10
10

3.75
4.65
4.65
5.75

1186

2.0 x 12.0

C8

5/16

41

24

10

6.80

axb
mm

outside

"

1.5
2.0
2.5
3.0

C4
C4
C4
C 6.3

0.5 x
0.6 x
0.6 x
0.8 x

4.0
3.5
4.5
4.0

C 6.3
C 6.3
C 6.3
C 6.3

1165
1166
1166/1
1167

0.8 x
1.0 x
1.2 x
1.2 x

5.5
5.5
6.5
8.0

08 07 00 28
08 07 00 29
08 08 00 30
08 08 00 31

1168
1169
1180
1181

08 08 00 32
08 08 00 33
08 08 00 34
08 08 00 35
08 08 00 36

Code

No

08 07 00 17
08 07 00 18
08 07 00 19
08 07 00 20

1157
1158
1159
1160

0.25 x
0.4 x
0.4 x
0.5 x

08 07 00 21
08 07 00 22
08 07 00 23
08 07 00 24

1161
1162
1163
1164

08 07 00 25
08 07 00 26
08 07 00 30
08 07 00 27

'

'

outside E DIN 3126/ISO 1173


Application: No 1416, size T20, for the door handle attachment for
Mercedes-Benz types 168 and 203
No 1421, size T45, for removing and refitting the front doors on the VW
Golf III and Vento from model year 93 on
No 1435, size T55, for screws in rear seats of BMW X6 Model E71,
7 series Model F01/F02

o BITS
with hollow point for inside TORX screws
(TORX TAMPER RESISTANT).
'

C outside
E

Code

No

size

mm

08 16 00 10
08 16 00 15
08 16 00 20
08 16 00 25

1440
1441
1442
1443

T 10
T 15
T 20
T 25

2.7
3.3
3.8
4.4

08 16 00 27
08 16 00 30
08 16 00 40

1444
1445
1446

T 27 5.0
T 30 5.5
T 40 6.6

'

'

outside E DIN 3126/ISO 1173


'

162

"

'

outside E DIN 3126/ISO 1173


'

C outside
E

Code

"

L
mm

R
g

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

26
26
26
26

6
6
6
6

10
10
10
10

4.90
4.90
4.70
4.55

C 6.3
C 6.3
C 6.3

1/4
1/4
1/4

26
26
26

6
6
6

10
10
10

4.55
4.55
4.55

n BITS

1427

i BITS

for inside TORX screws.

DIN 7426/ISO 3109,


for socket head screws, extra hard.

'

Code

size

"

L
mm

R
g

08 13 10 25

T 25

C 6.3

1/4

65

18

outside
'

'

'

3.35

For BMW series 3 and 5


outside E DIN 3126/ISO 1173
'

"

L
mm

R
g

1300
1301
1302
1303

3
4
5
6

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

25
25
25
25

4
5
5
6

10
10
10
10

2.15
2.15
2.15
2.15

1304

C 6.3

1/4

30

11

10

2.60

No

08 09 00 03
08 09 00 04
08 09 00 05
08 09 00 06
08 09 00 08

'

_ BITS

outside

mm

Code

'

outside E DIN 3126/ISO 1173


'

for inside TORX PLUS screws

i BITS

1299
'

"

L
mm

R
g

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

25
25
25
25

5
5
5
5

10
10
10
10

4.90
4.90
4.90
4.90

5
5
5
6

10
10
10
10

4.90
4.90
4.70
4.55

6
6
7

10
10
10

4.55
4.55
4.55

outside
Code

No

08 16 20 06
08 16 20 07
08 16 20 08
08 16 20 09

1436 IP 6
1437 IP 7
1438 IP 8
1439 IP 9

'

08 16 20 10
08 16 20 15
08 16 20 20
08 16 20 25

1440 IP 10
1441 IP 15
1442 IP 20
1443 IP 25

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

25
25
25
25

08 16 20 27
08 16 20 30
08 16 20 40

1444 IP 27
1445 IP 30
1446 IP 40

C 6.3
C 6.3
C 6.3

1/4
1/4
1/4

25
25
25

'

5-star BITS

for inside hexagon screws,


for operating the adjusting
screws on torque wrenches
No 720, 721, 730 and 730N.
'

Code
'

08 09 00 02
'

'

R
g

"

L
mm

1440 TPI 10
1441 TPI 15
1442 TPI 20
1443 TPI 25

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

26
26
26
26

6
6
6
6

5
5
5
5

5.90
5.90
5.75
5.75

1444 TPI 27
1445 TPI 30
1446 TPI 40

C 6.3
C 6.3
C 6.3

1/4
1/4
1/4

26
26
26

6
6
6

5
5
5

5.60
5.60
5.60

08 16 10 27
08 16 10 30
08 16 10 40

outside E DIN 3126/ISO 1173


'

1204/8

10

3.30

s BITS screwdrivers

TRIWING

"

L
mm

outside

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

25
25
25
25

5
5
5
5

10
10
10
10

5.50
5.50
5.50
5.50

08 25 00 04
08 25 00 05
08 25 00 06

4
5
6

C 6.3
C 6.3
C 6.3

1/4
1/4
1/4

25
25
25

5
5
8

10
10
10

5.50
5.50
7.15

'

outside E DIN 3126/ISO 1173


'

t BITS screwdrivers

13010

for TORQ-SET screws.

TORQSET

outside

"

L
mm

5-star BITS set

08 26 00 00
08 26 00 01
08 26 00 02
08 26 00 03

0
1
2
3

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

25
25
25
25

5
5
5
5

10
10
10
10

5.60
5.60
5.60
5.60

08 26 00 04
08 26 00 05
08 26 00 06
08 26 00 08

4
5
6
8

C 6.3
C 6.3
C 6.3
C 6.3

1/4
1/4
1/4
1/4

25
25
25
25

5
5
5
5

10
10
10
10

5.60
5.60
5.85
6.10

C 6.3
C8
C8
C8

1/4
5/16
5/16
5/16

25
32
32
32

5
11
11
11

10
10
10
10

6.10
6.65
6.65
6.65

'

08 26 00 10
08 26 00 16
08 26 00 20
08 26 00 24
'

10
1/4 A
5/16 A
3/8 A

outside E DIN 3126/ISO 1173

'

'

34

0
1
2
3

96 08 01 13

C 6.3

08 25 00 00
08 25 00 01
08 25 00 02
08 25 00 03

Code

For generators, motor management units,


airflow sensors, door trim, immobilisers
and injection pumps (e.g. Ford, MercedesBenz cars & HGVs, Rover, Volvo, VW/Audi).

'

1/4

'

Storage facility for BITS screwdriver


inserts.
Content:
1 bit-holder No 412
7 BITS screwdriver inserts for
female 5-star screws with centring pin,
sizes TPI 10, 15, 20, 25, 27, 30, 40.

Code

13008

outside

'

'

08 16 10 10
08 16 10 15
08 16 10 20
08 16 10 25

L
mm

for TRI-WING screws.

Code

'

"

'

'

No

outside

outside E DIN 3126/ISO 1173

with hollow point, for female 5-star screws with a centring pin.

Code

mm

'

87

60.00

163

IMPACT Sockets, Machine actuated


1201

BITS box

4000

Storage box with


screwdriver bits.
Content:
1 magnetic bit-holder
k 3 Bits, sizes 1; 2; 3 for Phillips
screws
l 3 Bits, sizes 1; 2; 3 for
POZIDRIV/SUPADRIV screws
r 3 Bits, sizes 0.6 x 4.5; 0.8 x 5.5;
1.2 x 6.5 mm; for slotted screws
o 6 Bits, size T10; size T15; size T20; size T25; size T30; size T40; for
inside TORX screws (TORX TAMPER RESISTANT)
b 3 Bits, sizes 4; 5; 6 mm; for inside hexagon screws

'

'

'

Code
'

96 08 01 02
'

1204/21-1

195

"

d
mm

L1
mm

L2
mm

R
g

D 6.3

1/4

11

75

190

119

inside
Code
18 07 10 26

'

Spinner handles

for BITS screwdriver bits with outside hexagon 1/4"


DIN 3126/ISO 1173 C 6.3, handle of impact proof plastic.
Internal hex drive with a collar-thrust spring.
Bits are easy to insert, lock securely in position and can be removed just
as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

25.60

inside b DIN 3126/ISO 1173


'

36.70

4006/1

Spinner with magazine holder

for 6 BITS screwdriver bits (25 mm)


with 1/4" outer hexagon,
DIN 3126/ISO 1173 C 6.3,
transparent plastic handle for storing
BITS with rotating selection cap,
internal hexagon and powerful permanent magnet.

BITS box

Storage box with screwdriver bits.


Content:
1 magnetic bit-holder
k 4 Bits, sizes 1; 2 (2x);
3 for Phillips screws
l 4 Bits, sizes 1; 2 (2x);
3 for POZIDRIV/SUPADRIV screws
n 9 Bits, sizes T10; T15; T20 (2x);
T25 (2x); T27; T30; T40;
for inside TORX screws
b 3 Bits, sizes 4; 5; 6 mm;
for inside hexagon screws

'

inside
Code
'

18 08 00 17
'

"

D 6.3

1/4

d
L1
mm mm

L2
mm

R
g

10

230

124

120

32.90

inside b DIN 3126/ISO 1173


'

12504

BIT holder

for BITS screwdriver bits with


outside hexagon 1/4"
DIN 3126/ISO 1173 C 6.3, flexible shaft, handle of impact proof plastic.
'

Code

'

96 08 01 21

185

'

'

Code
30.30

'

18 10 10 16
'

1204/21-2

96 08 01 22
'

164

L1
mm

L2
mm

D 6.3

1/4

175

290

168

S
10 17.30

'

BITS box

12503

BIT holder

for BITS screwdriver bits with outside


hexagon 1/4" DIN 3126/ISO 1173 C 6.3,
inside hexagon with magnet,
stubby version, handle of impact proof
plastic.
'

"

L1
mm

L2
mm

D 6.3

1/4

10

65

50

inside
Code
'

18 11 00 16
'

inside b DIN 3126/ISO 1173


'

'

'

"

inside b DIN 3126/ISO 1173

Storage box with


screwdriver bits.
Content:
1 magnetic bit-holder
k 3 Bits, sizes 1; 2; 3 for Phillips screws
r 4 Bits, sizes 0.5 x 3.0; 0.6 x 4.5;
0.8 x 5.5; 1.2 x 6.5 mm;
for slotted screws
n 6 Bits, sizes T10; T15; T20; T25; T30;
T40; for inside TORX screws
b 3 Bits, sizes 4; 5; 6 mm;
for inside hexagon screws
t 4 Bits, sizes 4; 6; 8; 10 mm;
for TORQ-SET screws

Code

inside

R
g

181

45.70

S
10 14.30

4007

BIT holder

4008

'

inside
Code
'

18 09 00 16
'

"

D 6.3

1/4

d
L1
mm mm

L2
mm

R
g

10

165

108

200

16.10

inside b DIN 3126/ISO 1173


'

415B

Ratcheting BIT holder

for BITS screwdriver bits


with outside hexagon 1/4"
DIN 3126/ISO 1173 C 6.3,
inside hexagon with magnet,
with T-handle.

BIT ratchet

1 Easy change of direction (anticlockwise, clockwise and fixed) by simply


twisting the locking ring
1 Ergonomically designed, non-slip 2-component handle for optimum
force transmission
1 Storage compartment for 6 bits in the handle; push button to open
(Size 1)
1 For BITS screwdriver inserts with external hex 1/4"
DIN 3126/ISO 1173 Type C 6.3
1 1/4" sockets can be used with Adaptor No 3115/1
(external hex and square drive 1/4")
1 Easy bit change thanks to internal hex drive with magnet
1 Knurled spin section for faster screw advance
1 Heavy-duty mechanism with 48 teeth (7.5 working angle)

reversible, 22 teeth,
with 2-component handle
and inside hexagon,
1/4", DIN 3126/ISO 1173 D 6.3
for BITS Screwdriver sockets 1/4".
Internal hex drive with a collar-thrust spring (registered design). Bits are
easy to insert, lock securely in position and can be removed just as easily;
even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

size 1

L2

'

inside
Code
'

11 13 10 11
'

"

D 6.3

1/4

L1

L
b
mm mm

a
mm

R
g

117

12

76

22

57.50

'

BIT ratchet

reversible, all steel handle,


for BITS screwdrivers with
outside hexagon 1/4"
DIN 3126/ISO 1173 C 6.3,
22 teeth.
Internal hex drive with a collar-thrust spring (registered design). Bits are
easy to insert, lock securely in position and can be removed just as easily;
even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

size

"

L1
mm

L2
mm

d
mm

R
g

1
2

D 6.3
D 6.3

1/4
1/4

127
25

250
95

10
10

202
134

1
1

inside
Code

415SGB

size 2

'

18 12 00 01
18 12 00 02
'

21.60
18.00

inside b DIN 3126/ISO 1173


'

4008/27/1R

Ratcheting BIT holder set

'

"

L
mm

R
g

D 6.3

1/4

117

85

inside
Code
'

11 13 00 11
'

59.00

inside b DIN 3126/ISO 1173


'

25B

29 pieces
Content:
1 Ratcheting bit holder No 4008-1
3 Bits k 1221; 1222; 1223
3 Bits l PZ 1221; PZ 1222; PZ 1223
6 Bits o 1440 T10; 1441 T15; 1442 T20; 1443 T25; 1445 T30; 1446 T40
3 Bits i 1301; 1302; 1303
3 Bits r 1163 0.6 x 4.5; 1165 0.8 x 5.5; 1166/1 1.2 x 6.5 mm
1 Square drive extension No 3115/1 with 1/4" outer hex. and outer square
drives for attaching 1/4" u sockets
9 Sockets No 40, 1/4" u sizes 4; 5; 5.5; 6; 7; 8; 10; 11; 13 mm

Ratcheting BIT holder

for hexagon BITS, magnetic location, reversible heads angled,


chrome plated.

'

Code
'

inside
b"

L
d1
d2
a1
a2 R
mm mm mm mm mm g

41 54 16 20 1/4 x 5/16 138


'

20

23

15

17

105

S
1

'

25.80

Code
'

96 18 12 03
'

3115/2

1025

140.80

BIT holder

for torque screwdrivers


No 760 and No 775,
inside hexagon DIN 3126 D4
for BITS screwdriver bits C4, outside hexagon 1/4"
DIN 3126/ISO 1173 E 6.3.
'

Code
'

31 15 00 03
'

inside

outside

"

L
mm

R
g

4 mm

E 6.3

1/4

60

18

17.00

outside E DIN 3126/ISO 1173


'

165

IMPACT Sockets, Machine actuated


1200/1

BIT holder

3216

Adaptors, machine operated

DIN 7428/ISO 3317, with outside hexagon for power operated


IMPACT sockets DIN 3129/ISO 2725-2 with inside square
DIN 3121/ISO 1174-2. Large collar diameter for better support of IMPACT
sockets. Square drive with spring loaded locking pin, Chrome Alloy Steel,
gunmetal finish.

with permanent magnet


1/4" inside and outside hexagon
1/4" DIN 3126/ISO 1173 C 6.3.

'

inside
Code
'

38 12 00 01
'

"

L
mm

R
g

E 6.3

1/4

72

37

outside

"

D 6.3

1/4

10.30

inside b/outside E DIN 3126/ISO 1173


'

'

3825/1

outside

Quick-change holder

No

32 16 00 01
32 16 00 02

3216/1 E 10
3216/2* E 10

'

for BITS screwdriver bits


with 1/4" external hexagonal drive
DIN 3126/ISO 1173 C 6.3,
with quick-action chuck,
adaptor with external hexagonal
drive for powered use.

'

"

L
mm

d R
mm g S

1/4
1/4

50
100

15.5 23
15.5 42

outside

Code

"
3/8
3/8

E 6.3
E 6.3

5
5

21.90
28.90

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin)


outside E DIN 3126/ISO 1173 Type E
* to be discontinued
'

'

"

"

L
mm

R
g

D 6.3

1/4

E 6.3

1/4

62

27

inside
Code
'

38 25 00 02
'

outside

3316/1
20.00

inside b/outside E DIN 3126/ISO 1173


'

3115

Adaptor, manually operated

Adaptor, machine operated

DIN 7428/ISO 3317, with outside hexagon for power operated


IMPACT sockets DIN 3129/ISO 2725-2 with inside square
DIN 3121/ISO 1174-2. Large collar diameter for better support of IMPACT
sockets. Square drive with spring loaded locking pin, Chrome Alloy Steel,
gunmetal finish.

for torque screwdrivers No 760 and


No 775, for manually operated
sockets with recessed 6.3 (1/4")
square drive DIN 3120/ISO 1174-1 Type C and D, square drive with ball
bearing, Chrome Alloy Steel, gunmetal finish.
'

outside
Code
'

outside

31 15 00 01 A 6.3
'

"

"

L
mm

1/4

E 6.3

1/4

50

"

"

L
mm

d R
mm g S

E 12.5

1/2

E 6.3

1/4

50

18

outside

'

d
mm

R
g

8.9

16

Code
'

11.50

outside D DIN 3120/ISO 1174-1 Type A (spring-loaded ball)


outside E DIN 3126/ISO 1173 Type E

33 16 00 01
'

outside

34

25.60

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin)


outside E DIN 3126/ISO 1173 Type E
'

'

3115/1

BIT holder

Adaptor, manually operated

square drive socket, for hand use only,


for BITS-Screwdriver bits with outside hexagon
1/4" or 5/16" DIN 3126/ISO 1173 C 6.3 or C 8,
Chrome Alloy Steel, chrome plated.
Internal hex drive with a collar-thrust spring (registered design).
Bits are easy to insert, lock securely in position and can be removed just
as easily; even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

for manually operated sockets with recessed


6.3 (1/4") square drive
DIN 3120/ISO 1174-1 Type C and D,
square drive with ball bearing,
Chrome Alloy Steel.
'

"

"

L
mm

R
g

A 6.3

1/4

C 6.3

1/4

25

10

outside
Code
'

31 15 00 02
'

outside

'

inside
5.50

outside D DIN 3120/ISO 1174-1 Type A (spring-loaded ball)


outside E DIN 3126/ISO 1173 Type C
'

No

"

11 18 00 10
12 18 00 26
12 18 00 30
13 18 00 10

412
442
443
543

D 6.3
D 6.3
D8
D8

1/4
1/4
5/16
5/16

'

'

3116/1

inside b DIN 3126/ISO 1173


inside a DIN 3120/ISO 1174-1

Adaptor, machine operated

DIN 7428/ISO 3317, with outside hexagon for power operated


IMPACT sockets DIN 3129/ISO 2725-2 with inside square
DIN 3121/ISO 1174-2. Square drive with spring loaded locking pin,
Chrome Alloy Steel, gunmetal finish.

'

'

"

"

L
mm

d R
mm g S

E 6.3

1/4

E 6.3

1/4

50

8.9

outside
Code
'

31 16 00 01
'

outside

16

outside D DIN 3121/ISO 1174-2 Type E (spring-loaded locking pin)


outside E DIN 3126/ISO 1173 Type E
'

166

21.30

"

d
mm

L
R
mm g S

1/4
3/8
3/8
1/2

11.6
16.5
16.5
22

25
32
32
38

inside

Code

a
C 6.3
C 10
C 10
C 12.5

15
30
39
65

5
5
5
5

15.40
18.00
19.00
21.70

412-1

k BITS screwdrivers

BIT holder

inside hexagon, DIN 3126/ISO 1173 D 6.3.


c
Outer w 10 mm for use in tools with 10 mm
internal hex drive or internal double hexagon
(e.g. "FLEXI" double-ended flexi-joint spanners,
T-handle universal joint spanners, box spanners,
ratchet ring spanners etc.).
Internal hex drive with a collar-thrust spring. Bits are easy to insert, lock
securely in position and can be removed just as easily; even hex bits with
a wide groove (Type E, DIN 3126/ISO 1173).

DIN 3128, for Phillips screws.

'

'

1/4"

outside
Code
'

11 18 00 20 10 mm
'

736

L
mm

d
mm

R
g

20

11.6

11

12.80

BIT holder insert tools

'

Code

No

08 31 00 01
08 31 00 02
08 31 00 03

1260
1261
1262

'

PhillipsRecess

outside

"

L
mm

R
g

1
2
3

E 6.3
E 6.3
E 6.3

1/4
1/4
1/4

50
50
50

10
11
11

10
10
10

"

L
mm

R
g

E 6.3
E 6.3
E 6.3

1/4
1/4
1/4

50
50
50

10
11
11

10
10
10

'

2.50
2.50
2.50

outside E DIN 3126/ISO 1173


Phillips-Recess DIN 5260

l BITS screwdrivers
for POZIDRIV/SUPADRIV screws.
'

Internal hex drive with a collar-thrust spring. Bits are easy to insert,
lock securely in position and can be removed just as easily;
even hex bits with a wide groove (Type E, DIN 3126/ISO 1173).

POZIDRIV/
SUPADRIV

Code

No

08 32 00 01
08 32 00 02
08 32 00 03

1270
1271
1272

'

outside

1
2
3

'

2.55
2.55
2.55

outside E DIN 3126/ISO 1173


'

i BITS screwdrivers
DIN 7426/ISO 3109,
for socket head screws.

'

"

mm

b
mm

5/16
1/4
5/16

;
;
,

16
14
16

inside

Code

size

58 26 10 10
58 26 26 10
58 26 10 40

10
D8
10.1 D 6.3
40
D8

'

'

S
mm

12.5 17.5
10
17.5
12.5 25

47
45
112

h
mm

'

30.20
30.70
41.20

inside b DIN 3126/ISO 1173


'

Code
'

No

"

L
mm

R
g

50
50
50
50

9
10
12
13

10
10
10
10

6.85
6.85
6.85
6.85

10

8.85

outside

mm

08 33 00 03
08 33 00 04
08 33 00 05
08 33 00 06

1280
1281
1282
1283

3
4
5
6

E 6.3
E 6.3
E 6.3
E 6.3

1/4
1/4
1/4
1/4

08 33 00 08

1284

E 6.3

1/4

50

18

"

L
mm

R
g

70
70
70
70

14
14
14
15

10
10
10
10

7.60
7.60
7.40
7.35

70
70
70

16
16
18

10
10
10

7.35
7.20
7.20

'

outside E DIN 3126/ISO 1173


'

BITS screwdrivers

n BITS screwdrivers

with outside hexagon DIN 3126/ISO 1173,


shape E 6.3 (1/4"), for use in power drivers.

for inside TORX screws.


'

r BITS screwdrivers

outside
Code

DIN 3127/ISO 2351, for slotted screws.

'

axb
mm

outside

"

L
mm

R
g

1242
1244
1246
1248

0.6 x 3.5
0.8 x 4.0
1.0 x 5.5
1.2 x 6.5

E 6.3
E 6.3
E 6.3
E 6.3

1/4
1/4
1/4
1/4

50
50
50
50

8
9
10
12

10
10
10
10

5.55
5.55
5.55
5.85

1250

1.6 x 8.0

E 6.3

1/4

50

14

10

6.50

Code

No

08 30 06 35
08 30 08 40
08 30 10 55
08 30 12 65
08 30 16 80

'

'

size

08 34 00 10
08 34 00 15
08 34 00 20
08 34 00 25

1290
1291
1292
1293

T 10
T 15
T 20
T 25

E 6.3
E 6.3
E 6.3
E 6.3

1/4
1/4
1/4
1/4

08 34 00 27
08 34 00 30
08 34 00 40

1294
1295
1296

T 27
T 30
T 40

E 6.3
E 6.3
E 6.3

1/4

'

No

'

1/4
1/4

outside E DIN 3126/ISO 1173


'

2801

Sockets

with hexagon inserts for power drivers, hexagon fitted with permanent
magnet, Chrome Alloy Steel, clear lacquered.

outside E DIN 3126/ISO 1173


'

'

outside

Code

mm

"

d
mm

L
mm

28 01 00 07
28 01 00 08
28 01 00 10
28 01 00 13

7
8
10
13

E 6.3
E 6.3
E 6.3
E 6.3

1/4
1/4
1/4
1/4

12
13
15.5
18.7

50
50
50
50

25
27
35
45

'

'

S
5
5
5
5

12.10
12.10
13.90
20.80

167

IMPACT Sockets, Machine actuated


13006

Special socket

4030

for use on plugs in electronic rack


Airbus A320A340.
'

"

mm

L
mm

E 6.3

1/4

11

50

10

outside
Code
'

08 23 00 01
'

'

10 24.00

Code
'

outside E DIN 3126/ISO 1173

32 20 00 01

'

'

13007

IMPACT driver

with inside hexagon for


BITS screwdriver inserts
No 40404058, suitable for screws
M 5M 10, torque 120 N m.

BIT screwdriver

inside
b"

L
mm

R
g

3/8

138

617

284.00

Adaptors

for use on plugs in electronic rack


Airbus A320A340.

with outside hexagon,


for IMPACT screwdriver
No 4030.

'

Code
'

08 24 00 06
'

outside

"

"

L
mm

R
g

3/32

E 6.3

1/4

50

10

'

8.40

Code

No

32 21 00 01
33 21 00 01

4035
4036

'

outside E DIN 3126/ISO 1173


'

'

775/30N/2

Set

outside
E"

outside
D"

L
mm

R
g

3/8
3/8

3/8
1/2

38
38

34
43

1
1

axb
mm

outside
E"

L
mm

14.60
15.90

r BITS screwdrivers

for use on plugs in electronic rack Airbus A320A340.


Content: 1 each
Torque Screwdriver TORSIOMAX No 775/30
Special Socket No 13006
BIT-Screwdriver insert No 13007

for slotted screws,


for IMPACT driver No 4030.
'

Code

No

08 40 00 10
08 40 00 14
08 40 00 16
08 40 00 20

4040
4041
4042
4043

1.0 x 7
1.4 x 9
1.6 x 10
2.0 x 12

3/8
3/8
3/8
3/8

40
40
40
40

17
19
21
20

10
10
10
10

08 40 00 15
08 40 00 25

4044
4045

1.5 x 13
2.5 x 16

3/8
3/8

40
40

24
30

10 15.40
10 17.00

PhillipsRecess

outside
E"

L
mm

2
3
4

3/8
3/8
3/8

35
35
35

17
17
17

outside
E"

L
mm

R
g

3/8
3/8
3/8
3/8

35
35
35
35

16
16
19
23

10
10
10
10

'

'

11.30
11.30
12.00
13.90

k BITS screwdrivers
for Phillips screws,
for IMPACT driver No 4030.

'

Code

'

96 51 05 02

235

'

'

1 313.40
Code

No

08 41 00 02
08 41 00 03
08 41 00 04

4050
4051
4052

'

4060

IMPACT driver set

for screw sizes M5M10,


in strong metal case.
Content:
1 each IMPACT driver No 4030
Adaptors No 4035; No 4036
r BITS screwdrivers for slotted
screws No 40404044
k BITS screwdrivers for
Phillips-screws No 40504052
i BITS screwdrivers for
Hex. Socket Head screws
No 40554058

'

'

96 32 20 01
'

168

S
10 12.30
10 12.30
10 12.30

Phillips-Recess DIN 5260


'

i BITS screwdrivers
for socket head screws,
for IMPACT driver No 4030.
'

No

mm

08 42 00 05
08 42 00 06
08 42 00 08
08 42 00 10

4055
4056
4057
4058

5
6
8
10

'

1410

492.55

Code
'

'

Code

14.20
14.20
14.20
14.20

Torque tools, Torque testers

Torque tools, Torque testers

Torque family
Overview
Torque wrenches
cut-out

indicating

No

714

714 AUDIT

Capacity

Page

11000 N m

180

2400 N m

182, 183

730D

101000 N m

184

730N

21000 N m

186

730

4800 N m

187

720Nf

160800 N m

188

721

6300 N m

188

721Nf

1601000 N m

189

755

1,5300 N m

190

3400 N m

191

360 N m

191

160800 N m

192, 193

215 N m

193

Capacity

Page

775

21000 cN m

194

760

15600 cN m

195

713R

712R/6

71

73Nm/15

Torque screwdrivers
cut-out

indicating

1
1

No

5
MULTIPOWER
No

Range

MP300

5000 N m

Page
205

MP1001500

1500 N m

206

Torque testers and calibrating units


No

Range

Page

7794 perfectControl

11000 N m

210

7791 Manutork

11000 N m

214

7792 Manutork

203000 N m

215

10 N m

215

0,41100 N m

216

Test attachments
for torque screwdrivers 7790, 7791-2
7707 W Torque tester

Insert tools for torque wrenches

!
170

Further details
on pp. 197-203

71/80

721Nf

720Nf

730D

713R

714
7707 W

730N

721
7794-2

730

755
MP100-1500

7791 + 7791-2

73Nm/15

MP300

760

171

Torque tools, Torque testers

MANOSKOP 714
Electromechanical torque and
angle-controlled wrench

Benefits at a glance:
1 Indicating
14

measuring methods (torque, angle, torque backed up by angle, angle backed up by torque)

1 Freely

configurable menu structure

1 Includes
13

and with cut-out

Sensomaster software for easy configuration of the tool

function modes: cut-out, peak (indicating mode displaying peak reading) and

track (indicating mode displaying current value)


1 Angle-controlled
1 Data

1 Acoustic

and visual assessment of the joint

1 Clockwise

measurement without a reference arm

storage ( 2,500 tightening jobs)


and anticlockwise tightening

1 Tactile

and acoustic trigger signals

1 Torque

and angle are simultaneously visible

1 All
1

readings are independent of the point of application of force with sizes 1, 2 and 4

Display deviation value 2 % for torque and 1% for angle

High-definition graphical colour display with additional side-mounted indicator

Automatic key-lock prevents inadvertent changes

Fast, accurate setting via keypad

Own ident number can be stored in the wrench

Indicator lamps clearly visible from all sides

lamps

Yellow light: advance warning threshold reached


Green light: within the target range
Red light: reading is outside the tolerance range

6
172

In a sturdy plastic case with foam inlays (sizes 40100 in steel case)
With certificate

NEW

Also available with adaptor for 22 x 28 mm


1 Tighten
1 High
1 650

large torques effortlessly

long-term durability
1000 N m

5
7

No 7195-2

No 7160

Optional extras: Li-Ionen battery No 7195-2 and charger No 7160

Individually configurable menus

Micro USB interface

10

Battery compartment with smooth-action bayonet fitting

11

Up to 200 joints can be programmed in up to 25 sequences

12

The wrench reminds the user automatically when calibration is due

10

either by the number of joints or the time interval

Further details
on pp. 180

173

Torque tools, Torque testers

Sensotork 713R
Electronic torque wrench/
angle-controlled wrench

Benefits at a glance:
1 Angle-controlled
1 Broad

measuring range (5% 100% of rated value)

1 Extremely
1 Units

wide range of angle measurement

of measurement N m / ft.lb / in.lb

1 Clockwise
1 For

and anticlockwise use

use with all insert tools 9x12 and 14x18 mm

1 QuickSelect
1 Defined
1a

defined sequence
can either be directly stored, transmitted to the PC or simply displayed

1 Password
1 Freely

protection tamper proof use

selectable names for each series of test

1 Various

languages available

1 Works-specific

identifier

1 Programmable

via PC

1 Resistant
1 Wide

to oils, grease, fuels, brake fluids and Skydrol

range of application: 20C to +60C

1 Meets

requirements of DKD-R 3-7, Class 2

1 Deviation

174

rapid recall of predefind sets of operating parameters

sequence a number of repeated joints can be grouped as

1 Readings

measurements without a reference arm

of indication 1%

Warning signals: acoustic (buzzer), tactile (vibration in the handle), visual (LEDs and

Amazingly simple handling

display). The point at which the warning signal is triggered can be freely set

All functions are selected using the arrow keys. The visual guidance system makes
operation a simple matter

Measurements independent of the point of application of force (sizes 6 and 20)

Easy extension setting

Where the insert tool requires an extension adjustment, simply enter the new
value. Recalculation using complicated formulae is no longer necessary

Data output USB interface

QuickRelease
Firm locking and rapid change of any insert tools

Further details
on pp. 191

175

Torque tools, Torque testers

MANOSKOP 730D
Electromechanical torque wrench
1

Benefits at a glance:
1 Cut-out

and indicating

1 Displays

the torque actually applied after the wrench cuts out. In this way, the user has the

opportunity to optimise his or her working methods.


1 Units

of measurement: N m / ft.lb / in.lb

1 Automatic
1 Display

keypad lock

also works for anticlockwise torque

1 Angle-controlled
1 Overload

measurement without a reference arm using a supplementary module

protection by means of acoustic and visual signals

1 Automatic

compensation to achieve correct tightening torque even if a changed extension is

entered

1 Different
1 Visual

tolerance limits can be set for each joint

red and green signals in the display confirm the status of the joint

1 Additional

security for presets using PIN code

1 Automatic

notification of the next calibration date

1 Deviation

of indication 2%

Measure, cut-out and record: When the preset torque is reached, the torque wrench cuts out
and indicates this fact to the user via a definite tactile and audible signal. The tightening
torques are stored. The data can be transferred to a PC for evaluation and documentation.

176

The square drive enables a broad range of insert tools

Dual stop signal with tactile and acoustic cut-out signals

Easy-to-read display

Rapid setting
The convenient keypad enables the torque wrench to be quickly and easily set

NEW

Also available with adaptor for 22 x 28 mm

1 Tighten
1 High
1 650

large torques effortlessly

long-term durability
1000 N m

7395-1

Power supply two 1.5 V AA batteries

Angle controlled tightening

Data output USB interface

2-component handle has ergonomically designed, green softer layers and is

QuickRelease safety lock

Simply attach the Angle Module No 7395-1 and connect the cable to the interface

resistant to oils, grease, fuels, brake fluids and Skydrol.

Further details
on pp. 184

177

Torque tools, Torque testers

MANOSKOP 730N
Mechanical torque wrench
1

Benefits at a glance:
1 Accurate
1 Audible

setting positions

1 Fail-safe
1 Clearly

one-handed setting quick & easy control using the knob at the end of the handle
setting mechanism in the knob

readable twin scale (N m and ft.lb)

1 Noticeable
1 Square

double signals when the preset torque is reached

drives with

1 QuickRelease
1 Handle

safety locks for 9x12, 14x18 and 22x28 mm

is resistant to oils, grease, fuels, brake fluids and Skydrol

1 Deviation

of indication 3%

178

Protected mechanism extremely resistant to mechanical wear, protected against

Easily readable double scale. The colour differentiation between the N m and ft.lb

Two-component handle made of extremely tough, impact resistant plastic with a

Ring scale with fine settings for the black measuring range on the twin scale

QuickSelect rapid setting: Pull, set, lock. All using the one setting knob

No need for manual reset to zero thanks to the wear-free triggering cam system.

dirt inside the outer housing

scales simplifies fine setting

kind-to-the-hands softer layer

The measuring element is only under load while force is being applied.

NEW

Also available with adaptor for 22 x 28 mm


1 Tighten
1 High
1 650

large torques effortlessly

long-term durability
1000 N m

The square drive enables a broad range of tightening tools

Rapid adjustment from outside, no disassembly of the torque wrench

QuickRelease safety lock

10

Firm locking and rapid change of insert tools thanks o the QuickRelease safety lock

Integrated clockwise and anticlockwise operation simply by turning over the


wrench and insert tool

Further details
on pp. 186

179

Torque tools

MANOSKOP 714 indicating and cut-out


Electromechanical torque and angle-controlled wrench

1 4 measuring modes (torque, angle, torque


backed up by angle, angle backed up by torque)
1 high-definition colour display with additional
side-mounted indicator lamps
1 freely configurable menu structure
1 optionally: Li-ion battery No 7195-2 and
charger No 7160
1 3 function modes: cut-out, peak (indicating
mode with peak value) and track (indicating
mode with current value)
1 Micro USB interface
1 bayonet connection for battery compartment
1 QuickRelease safety lock change 196system for insert tools
203
1 angle-controlled measurement
without a reference arm Data
_ 2500 tightening jobs)
storage (<
1 as many as 200 joints can be programmed in
up to 25 preset sequences.
1 different tolerance limits can be set for each joint
1 acoustic and visual assessment of the joint
1 rapid, accurate setting via keypad
1 the automatic keypad lock prevents inadvertent
changes
1 overload protection by means of acoustic and
visual signals and a fail-safe system (clockwise)
1 automatic notification of the next calibration
date, either by the number of joints or the time
interval
1 fully automated calibrating and adjusting using
the perfectControl calibrating and adjusting unit
No 7794-2 (torque) or 7794-3
(torque and angle)

714

180

1 units of measure: N m, ft.lb, in.lb.


1 tightening torque is automatically corrected if
a deviating extension is entered
1 immediately reusable after release
1 clockwise and anticlockwise tightening it may
be necessary to refit the insert tool rotated
through 180 for anticlockwise tightening in the
cut-out mode
1 tactile and acoustic trigger signal.
1 torque and angle are simultaneously visible
1 all readings are independent of the point of
application of force (with sizes 1, 2 and 4)
1 safe handling due to ergonomically designed
handle (resistant to oils, grease, fuels, brake fluid
and Skydrol)
1 2 certificates (torque, angle)
1 in sturdy plastic case (size 40-100 in steel case)
1 design patent, patent
1 supplied with Sensomaster Basic software,
USB cable, 4 AAA/LR03 micro-batteries, 1.5 V.
AAA, 1.2 V, micro NiMH rechargeable batteries
can be used
1 display resolution, angle 0.1
1 display deviation value, angle 1%, 1 digit
_ 60 N m: 0.01 N m;
1 display resolution, torque <
> 60 N m: 0.1 N m
1 display deviation value, torque 2%, 1 digit

Basic wrenches with tool carrier for insert tools

'

Code
'

96 50 09 01
96 50 09 02
96 50 09 04
96 50 09 06

size

110 N m
220 N m
440 N m
660 N m

0.7 7.5 ft.lb


1.515 ft.lb
330 ft.lb
4.545 ft.lb

990 in.lb
18180 in.lb
36360 in.lb
54540 in.lb

10100 N m
20200 N m
40400 N m
65650 N m

7.475 ft.lb
15150 ft.lb
30300 ft.lb
48480 ft.lb

90900 in.lb
1801800 in.lb
3603600 in.lb
5805800 in.lb

96 50 09 80 80 U
80800 N m
96 50 01 00 100 U 1001000 N m

60600 ft.lb
74750 ft.lb

7207200 in.lb
9009000 in.lb

1
2
4
6

96 50 09 10 10
96 50 09 20 20
96 50 09 40 40
96 50 09 65 65 U
1

'

714R

b
mm

;
;
;
;
;
,
,
.
.
.

28
28
28
28

mm

h
mm

L
mm

LF
mm

SF
mm

Rg
with box

23
23
23
23

226
226
252
393

188
188
214
355

17.5
17.5
17.5
17.5

370
380
420
810

795
805
845
1235

1064.00
1064.00
1122.00
1122.00

28
28
28
30.6

23
23
23
25.6

466
547
687
890

428
516
656
890

17.5
25
25
55

1085
1361
1765
3222

1655
1896
5155
6017

1164.00
1190.00
1285.00
1530.00

30.6
30.6

25.6
25.6

1158
1343

1158
1343

55
55

4572
4990

8662
9080

1665.00
1778.00

Basic wrenches with ratchet insert tool

'

Code

'

size

110 N m
220 N m
440 N m
660 N m

0.77.5 ft.lb
1.515 ft.lb
330 ft.lb
4.545 ft.lb

990 in.lb
18180 in.lb
36360 in.lb
54540 in.lb

96 50 10 01
96 50 10 02
96 50 10 04
96 50 10 06

1
2
4
6

96 50 10 10
96 50 10 20
96 50 10 40
96 50 10 65

10
20
40
65 U

10100 N m
20200 N m
40400 N m
65650 N m

7.475 ft.lb
15150 ft.lb
30300 ft.lb
48480 ft.lb

90900 in.lb
1801800 in.lb
3603600 in.lb
5805800 in.lb

96 50 10 80
96 50 11 00

80 U
100 U

80800 N m
1001000 N m

60600 ft.lb
73735 ft.lb

720-7200 in.lb
885-8850 in.lb

'

7732-1

SENSOMASTER Premium Assembly


software

for MANOSKOP 714.


1 For recording additional information on the tightening operation
(e.g. employee name, assembly designation, operation). As many as
5 data fields can be configured.
1 Sequence control on the basis of information recorded.
1 Support for various workflows.
1 The torque wrench can be blocked at the end of the tightening sequence.
1 Work sequences can be resumed after an interruption.
1 Automatic export of joint data for further processing on a PC.
User-specific content is possible on request.
1 Automatic log data print-out. User-specific formats are possible on
request.

7732-2

R
g

Rg
with box

;
;
;
;
;
,
,
.
.
.

1/4
1/4
1/4
3/8

432
442
482
965

857
867
907
1390

1126.50
1126.50
1184.50
1189.00

1/2
1/2
3/4
3/4

1232
1663
2275
5137

1657
2198
5665
7932

1233.00
1262.00
1392.00
1907.00

3/4
3/4

6487
6905

10577
10995

2042.00
2155.00

mm

"

SENSOMASTER Live software

1 Record tightening operations with the MANOSKOP 714 and 714 AUDIT.
1 Representation of torque over time, angle over time, torque over angle.
1 Representation of several curves simultaneously.
1 Data export for further processing.

'

Code
'

58 52 10 35
'

R
g

54

1080.00

'

Code
'

58 52 10 34
'

R
g

54

2161.00
181

Torque tools
7195-2

Li-ion battery for No 714

7160

including charger
Input:
100 V240 V AC ,
Output: 4.2 V DC,
with interchangeable socket adaptors.

'

Code

Charging dock for Li-ion battery


No 7195-2

'

54 10 11 95

100

'

70.50

'

Code

'

7762

Docking station for No 714

54 10 00 60

200

'

7762-1

stationary base for securely


connecting angle-controlled
torque wrench No 714 to a PC
via a USB port.

119.00

Rest for docking station No 7762

U
for securely supporting long anglecontrolled torque wrenches No 714
from size 6 up.

'

Code
'

52 11 00 62
'

R
g

421

'

285.00

Code
'

52 11 01 62
'

R
g

520

44.30

MANOSKOP 714 AUDIT indicating electronic angle-controlled torque wrench


for joint auditing
1 2 audit modes (prevail torque and loosen-tighten)
1 4 measuring modes (torque, angle, torque backed
up by angle, angle backed up by torque)
1 high-definition colour display with additional
side-mounted indicator lamps
1 freely configurable menu structure
1 optionally: Li-ion battery No 7195-2 and charger
No 7160
1 2 function modes: peak (indicating mode with
peak value) and track (indicating mode with
current value)
1 Micro USB interface
1 bayonet connection for battery compartment
1 QuickRelease safety lock change 196system for insert tools
203
1 angle-controlled measurement
without a reference arm
_ 2500 tightening jobs)
1 Data storage (<
1 as many as 200 joints can be programmed in up to
25 preset sequences.
1 different tolerance limits can be set for each joint
1 acoustic and visual assessment of the joint
1 rapid, accurate setting via keypad
1 the automatic keypad lock prevents inadvertent
changes
1 overload protection by means of acoustic and
visual signals
1 automatic notification of the next calibration date,
either by the number of joints or the time interval
182

1 fully automated calibrating and adjusting using the


perfectControl calibrating and adjusting unit
No 7794-2 (torque) or 7794-3 (torque and angle)
1 units of measure: N m, ft.lb, in.lb.
1 tightening torque is automatically corrected if a
deviating extension is entered
1 immediately reusable after release
1 clockwise and anticlockwise tightening
1 torque and angle are simultaneously visible
1 all readings are independent of the point of
application of force
1 safe handling due to ergonomically designed
handle (resistant to oils, grease, fuels, brake fluid
and Skydrol)
1 2 certificates (torque, angle)
1 in sturdy plastic case (size 40 in steel case)
1 design patent
1 supplied together with SENSOMASTER Premium
Audit software (single-installation licence,
additional licences on request), USB cable, 4
AAA/LR03 micro-batteries, 1.5 V. AAA, 1.2 V, micro
NiMH rechargeable batteries can be used
1 display resolution, angle 0.1
1 display deviation value, angle 1%, 1 digit
1 display resolution, torque d 60 N m: 0.01 N m;
> 60 N m: 0.1 N m
1 display deviation value, torque 1%, 1 digit

714 AUDIT

Basic wrenches with tool carrier for insert tools

U
2 audit modes

Prevail torque:
After torqueing, a further defined
angle is applied with the torque
wrench. When the target angle is
reached, the torque applied at that
moment is stored.

Loosen-tighten:
The joint is loosened by a defined
angle in the first step and then
tightened again to the original
position. When the target angle is
reached, the torque applied at that
moment is stored.

5
'

Code
'

96 50 12 02
96 50 12 10
96 50 12 20
96 50 12 40

size

2
10
20
40

220 N m
10100 N m
20200 N m
40400 N m

1.515 ft.lb
7.475 ft.lb
15150 ft.lb
30300 ft.lb

18180 in.lb
90900 in.lb
1801800 in.lb
3603600 in.lb

'

mm

b
mm

h
mm

L
mm

LF
mm

SF
mm

R
g

Rg
with box

;
;
,
,

28
28
28
28

23
23
23
23

226
466
547
687

188
428
516
656

17.5
17.5
25
25

380
1085
1361
1765

805
1655
1896
5155

2391.00
2385.00
2542.00
3604.00

available from June 2014


'

714R AUDIT

Basic wrenches with ratchet insert tool

'

Code
'

96 50 14 02
96 50 14 10
96 50 14 20
96 50 14 40

size
2
10
20
40

'

W
220 N m
10100 N m
20200 N m
40400 N m

W
1.515 ft.lb
7.475 ft.lb
15150 ft.lb
30300 ft.lb

W
18180 in.lb
90900 in.lb
1801800 in.lb
3603600 in.lb

;
;
,
,

1/4
1/2
1/2
3/4

442
1232
1663
2275

mm

"

Rg
with box
867
1657
2198
5665

2453.50
2454.00
2614.00
3711.00

available from June 2014


'

183

Torque tools

Service work & series production MANOSKOP indicating and cut-out


1 tactile and acoustic trigger signal
1961 mount for interchangeable insert tools
203
1 QuickRelease safety lock
1 fast setting using convenient keypad
1 automatic compensation to achieve correct
tightening torque even if a changed extension is
entered
1 overload protection by means of acoustic and
visual signals
1 automatic keypad lock prevents inadvertent
changes
1 angle-controlled measurements without a
reference arm using Angle Module No 7395-1
(refer to page 185)
1 display also works for anticlockwise torque
1 units of measurement: N m, ft.lb, in.lb
1 different tolerance limits can be set for each joint
1 visual red and green signals in the display confirm
the status of the joint
730D

1 additional security for presets (function mode,


trigger or preset value, unit of measurement,
tolerance, save, deviating extension) using
PIN code
1 up to 7.500 measurements can be stored
1 USB interface
1 automatic notification of the next calibration date
1 calibration using perfectControl calibrating unit
No 7794 or calibration system No 7706
1 two-component handle with ergonomically
designed green softer layers (resistant to oils,
grease, fuels, brake fluids and Skydrol)
1 with certificate
1 in sturdy plastic case (sizes 40-100 in steel case)
1 patent
1 supplied with two 1.5 V AA batteries. AA/LR6,
1.2 V rechargeable cells may also be used
1 display deviation value 2%

Basic wrenches with tool carrier for insert tools

'

Code
'

96 50 17 10
96 50 17 20
96 50 17 40
96 50 17 65
1

size
10
20
40
65*

W
10100 N m
20200 N m
40400 N m
65650 N m

Setting/display resolution J
Nm
ft.lb
in.lb
mm

7.475 ft.lb
90900 in.lb 0.2/0.1
15150 ft.lb 1801800 in.lb 0.5/0.1
30300 ft.lb 3603600 in.lb 1.0/0.1
48480 ft.lb 5805800 in.lb 1.0/0.1

0.2/0.1
0.5/0.1
1.0/0.1
1.0/0.1

2/1.0
5/1.0
10/1.0
10/1.0

96 50 19 65 II/65 U 65650 N m 48480 ft.lb 5805800 in.lb 1.0/0.1 1.0/0.1 10/1.0


96 50 20 80
80 U 80800 N m 60600 ft.lb 7207200 in.lb 1.0/1.0 1.0/1.0 10/1.0
96 50 21 00 100 U 1001000 N m 74750 ft.lb 9009000 in.lb 1.0/1.0 1.0/1.0 10/1.0
'

;
,
,
,
.
.
.

b
h
mm mm

L
mm

LF
mm

SF
mm

28
28
28
30.6

467
548
688
870

426.5
515
655
837

17.5
25
25
25

1085
1361
1765
3300

55
55
55

3224 6000 981.00


4577 8667 1312.10
4995 9085 1621.10

23
23
23
25.6

30.6 25.6 892 889


30.6 25.6 1160 1157
30.6 25.6 1344 1341

Rg
with box

1510
1896
5155
6000

423.25
454.80
662.60
821.60

* recommended ratchet insert tool No 735/40HD


'

730DR

Basic wrenches with ratchet insert tool

'

Code

size

96 50 18 10
96 50 18 20
96 50 18 40
96 50 18 65

10
20
40
65*

'

Setting/display resolution
Nm
ft.lb
in.lb

7.475 ft.lb
90900 in.lb
15150 ft.lb 1801800 in.lb
30300 ft.lb 3603600 in.lb
48480 ft.lb 5805800 in.lb

0.2/0.1
0.5/0.1
1.0/0.1
1.0/0.1

0.2/0.1
0.5/0.1
1.0/0.1
1.0/0.1

2/1.0
5/1.0
10/1.0
10/1.0

96 50 20 65 II/65 U 65650 N m 48480 ft.lb 5805800 in.lb


96 50 18 80
80 U 80800 N m 60600 ft.lb 7207200 in.lb
96 50 18 00 100 U1001000 N m 74750 ft.lb 9009000 in.lb

1.0/0.1
1.0/0.1
1.0/0.1

1.0/0.1
1.0/0.1
1.0/0.1

10/1.0
10/1.0
10/1.0

'

184

10100 N m
20200 N m
40400 N m
65650 N m

R
g

Rg
with box

;
,
,
,
.
.
.

1/2
1/2
3/4
3/4

1232
1663
2232
3767

1657
2198
4722
6530

492.25
526.80
769.60
928.60

3/4
3/4
3/4

3994
6492
6910

6757
10582
11000

1358.00
1689.10
1998.10

mm

"

7759-3

USB adaptor, jack cable and software


No 7732 for No 730D

Documentation and management of readings on a PC


1 Read out stored wrench data and joint readings:
- Joint identifier
- Tool serial number
- Date and time of tightening operation
- Target torque or target angle
- Torque level at which the tool cuts out
- Tightening torque or angle reached
- Tolerances
- Joint evaluation
1 Storage of joint data in a database
1 Delete or print highlighted joints from the database
1 Export displayed joint data to a CSV file (compatible with Excel)
1 13 languages
1 User management
1 Define new PIN
1 Delete joint data stored in wrench

7395-1

Angle Module for No 730D

Patents applied for, angle-controlled measurement without a reference


arm. For torque wrench No 730D (sizes 10-65) from software release
1.5.8. Torque wrenches No 730D fitted with older releases of the software
can be upgraded. Simply attach the module and connect to the torque
wrench interface and the No 730D can be used for angle controlled
tightening. The measurements are read off and settings made via the
torque wrench.
When the preset snug point is reached, the torque wrench automatically
switches over to angle-controlled measurement in degrees. Depending on
the options selected, the torque wrench will either cut out when the
preset angle is reached or an alarm is heard. One 1.5 V battery is included
in the package. Deviation of indication 1%.

System requirements:
1 PC
1 Microsoft Windows 98 SE or compatible operating system with
USB support
1 USB connection
1 Installed ODBC driver for Access data

5
'

Code
'

96 58 36 28
'

R
g

387

435.05

'

Code

L
m

96 58 36 27

1.5

137

'

'

127.20

185

Torque tools

Service MANOSKOP 730N


1 cut-out type
1961 mount for interchangeable insert tools
203
1 QuickRelease safety lock
1 fast, accurate setting thanks to QuickSelect
quick-action adjuster
1 dual stop signal
1 easy-to-read double scale with colour coding to
differentiate between N m and ft.lb scales
1 the measuring element is only under load while force is
being applied, no need for manual reset to zero
1 can be applied for either clockwise or anticlockwise
tightening by turning the inserts over

730N

1 any force applied to the tool after the click or applied


in the opposite direction to the current function e.g.
forcible loosening of a jammed screw - does not act on
the trigger mechanism and cannot cause damage to it.
1 two-component handle with ergonomically designed
green softer layers (resistant to oils, grease, fuels, brake
fluids and Skydrol)
1 calibration using perfectControl calibrating unit
No 7794 or calibration system No 7706. Adjustment
without disassembly.
1 with certificate
1 registered design
1 display deviation value 3%

Basic wrenches with tool carrier for insert tools


h

b
SF

'

b
mm

h
mm

L
mm

LF
mm

SF
mm

;
;
;
,
,
,
,
.
.
.
;
;
;
,
,

28
28
28
28

23
23
23
23

275
330
386
421

226
280.5
336
379

17.5 737
17.5 831
17.5 988
25
1128

235.00
251.00
270.00
284.00

28
28
30.6
30.6

23
23
25.6
25.6

467
607
890
911

424.5
564.5
848
900

25
25
25
55

308.00
457.00
670.00
690.00

30.6
30.6
28
28

25.6 1178 1167


25.6 1363 1297
23
275 226
23
330 280.5

28
28
28

23
23
23

Fine scale
Code
'

50 18 10 02
50 18 10 05
50 18 10 10
50 18 10 12
1

size

2
5
10
12

220 N m
1050 N m
20100 N m
25130 N m

20180 in.lb
737 ft.lb
1575 ft.lb
2095 ft.lb

1Nm
5Nm
10 N m
10 N m

10 in.lb
1 ft.lb
2.5 ft.lb
2.5 ft.lb

0.2 N m
0.25 N m
0.5 N m
0.5 N m

40200 N m
80400 N m
130650 N m
130650 N m

30150 ft.lb
60300 ft.lb
100480 ft.lb
100480 ft.lb

10 N m
20 N m
50 N m
50 N m

5 ft.lb
10 ft.lb
20 ft.lb
20 ft.lb

1Nm
2Nm
2.5 N m
2.5 N m

120600 ft.lb 100 N m


150750 ft.lb 100 N m
1.515 ft.lb 10 in.lb
737 ft.lb 50 in.lb

25 ft.lb
25 ft.lb
0.5 ft.lb
1 ft.lb

5Nm
5Nm
2 in.lb
2.5 in.lb

180900 in.lb
1575 ft.lb 100 in.lb
3501800 in.lb
30150 ft.lb 100 in.lb
60300 ft.lb 8003600 in.lb 20 ft.lb

2.5 ft.lb
5 ft.lb
100 in.lb

5 in.lb
10 in.lb
2 ft.lb

50 18 10 20
20
50 18 10 40
40
50 18 10 65
65*
50 18 13 65 II/65 U
1

80 U 160800 N m
100 U 2001000 N m
a/2
20180 in.lb
a/5
90450 in.lb

50 18 10 80
50 18 11 00
50 58 10 02
50 58 10 05
1

50 58 10 10 a/10
50 58 10 20 a/20
50 58 10 40 a/40
'

mm

386
467
607

R
g

1264
1655
3231
3504

55
4882 823.00
55
5300 1080.00
17.5 737 257.00
17.5 831 255.00

336
17.5 988
424.5 25
1264
564.5 25
1655

277.00
308.00
448.00

* recommended ratchet insert tool No 735/40HD


'

730NR

Torque wrenches with permanently installed fine-tooth ratchet

in sturdy plastic case (size 65 in steel case). Deviation of indication 4%.


LF
b2

h1

h2

b1

L
'

b1
b2 h1
mm mm mm

5 N m 1 ft.lb 0.25 N m
10 N m 2.5 ft.lb 0.5 N m
10 N m 5 ft.lb
1Nm
20 N m 10 ft.lb
2Nm

3/8
1/2
1/2
3/4

28
28
28
28

50 N m 20 ft.lb

3/4

30.6 58 25.6 36

Fine scale
Code
96 50 31 05
96 50 31 10
96 50 31 20
96 50 21 40
1

size

'

5 FK U
10 FK U
20 FK U
40 FK

96 50 22 65 65 FK-HD
'

730NR

1050 N m
20100 N m
40200 N m
80400 N m

W
737 ft.lb
1575 ft.lb
30150 ft.lb
60300 ft.lb

130650 N m 100480 ft.lb

2.5 N m

"

33
33
43
50

23
23
23
23

LF
mm

L
mm

24
24
26
31.5

364
364
513.5
657

280.5 973
336.5 1146
425
1583
564.5 2122

1480
1658
2266
2657

363.15
375.15
419.15
597.70

944

848

6188

888.00

3698

Torque wrenches with permanently installed QuickRelease ratchet

in sturdy plastic case (size 65 in steel case). Ratchet has Quick-Release safety lock. Deviation of indication 4%.
LF
b2

'

Code
'

h2

b1

186

h1

size

96 50 21 05 5QR FK
96 50 21 10 10QR FK
96 50 21 20 20QR FK
'

Rg
with box

h2
mm

W
1050 N m
20100 N m
40200 N m

W
737 ft.lb
1575 ft.lb
30150 ft.lb

Fine scale D
"
X

5 N m 1 ft.lb 0.25 N m
10 N m 2.5 ft.lb 0.5 N m
10 N m 5 ft.lb
1Nm

3/8
1/2
1/2

b1
b2 h1
mm mm mm
28
28
28

29 23
29 23
41 23

h2
mm

L
mm

LF
mm

R
g

14.5 372.5 291


961
14.5 428.5 346.5 1129
18
526
438.5 1589

Rg
with box
1386
1554
2014

379.15
391.15
438.15

Service MANOSKOP 730


1 cut-out type
1961 mount for interchangeable insert/shell tools 203
1 QuickRelease safety lock (sizes 565)
1 rapid setting (sizes 265)
1 dual stop signal
1 twin scales N m/ft.lb and N m/in.lb (sizes 580)
1 the measuring element is only under load while
force is being applied, no need for manual reset
to zero
1 can be applied for either clockwise or anticlockwise tightening by turning the inserts over
730

1 any force applied to the tool after the click or


applied in the opposite direction to the current
function e.g. forcible loosening of a jammed
screw - does not act on the trigger mechanism
and cannot cause damage to it.
1 calibration using perfectControl calibrating unit
No 7794 or calibration system No 7706.
Adjustment without disassembly.
1 with certificate
1 display deviation value 4%

Basic wrenches with tool carrier for insert tools

'

Code

size

'

50 18 00 02
50 18 00 04
50 58 00 01
50 58 00 02

2
4
a/2-1
a/2

420 N m
840 N m
17.587.5 in.lb
30175 in.lb

0.5 N m
1Nm
2.5 in.lb
5 in.lb

50 58 00 04

a/4

70350 in.lb

10 in.lb

'

b
mm

h
mm

L
mm

;
;
;
;
;

27.5
27.5
27.5
27.5

23
23
23
23

178.5
222
178.5
178.5

27.5

23

222

mm

mm

SF
mm

174
218
174
174

17.5
17.5
17.5
17.5

315
395
315
315

206.00
211.00
242.00
217.00

218

17.5

395

221.00

LF
mm

'

Code
'

50 18 00 05
50 18 00 10
50 18 00 12
50 18 00 20
1

size
5
10
12
20

50 18 00 40
40
50 18 00 65
65*
50 18 15 65 II/65 U
50 58 00 05 a/5
1

50 58 00 10 a/10
50 58 00 12 a/12
50 58 00 20 a/20
'

650 N m
20100 N m
25130 N m
40200 N m

536 ft.lb
1572.5 ft.lb
2095 ft.lb
30145 ft.lb

2Nm
2.5 N m
2.5 N m
5Nm

1 ft.lb
2.5 ft.lb
2.5 ft.lb
5 ft.lb

80400 N m
130650 N m
130650 N m
650 N m

60300 ft.lb
100480 ft.lb
100480 ft.lb
50440 in.lb

10 N m
20 N m
20 N m
2Nm

10 ft.lb
20 ft.lb
20 ft.lb
10 in.lb

20100 N m
25130 N m
40200 N m

180880 in.lb
2251150 in.lb
3501750 in.lb

2.5 N m
2.5 N m
5Nm

20 in.lb
25 in.lb
50 in.lb

b
mm

h
mm

LF
mm

SF
mm

;
;
,
,
,
,
.
;
;
,
,

28
28
28
28

23
23
23
23

315
370
410
455

288
343
390
435

17.5
17.5
25
25

805
965
1100
1250

221.00
235.00
247.00
267.00

28
30.6
30.6
28

23
25.6
25.6
23

590
875
897
315

570
855
907
288

25
25
55
17.5

1880
3280
3280
805

391.00
581.00
598.00
220.00

28
28
28

23
23
23

370
410
455

343
390
435

17.5
25
25

965
1100
1250

242.00
259.00
267.00

b
mm

h
mm

L
mm

LF
mm

SF
mm

46

43

970

990

95

5377

L
mm

* recommended ratchet insert tool No 735/40HD


'

730

Basic wrench with tool carrier for shell tools

'

Code

size

50 18 00 80

80

160800 N m

120600 ft.lb

20 N m

20 ft.lb

'

'

mm

822.00

Use shell adaptor No 7370/80 to make 14 x 18 mm insert tools fit.


'

187

Torque tools

Standard MANOSKOP 720Nf


1 cut-out type
1 easy setting
1 dual stop signal
1 twin scales N m/ft.lb
1 anticlockwise torquing thanks to swap-over
square drive

720Nf

1 all the sensitive components are protected by


the sturdy tubular steel housing in the U-shaped
aluminium profile
1 calibration using perfectControl calibrating unit
No 7794 or calibration system No 7706.
Adjustment without disassembly.
1 with certificate
1 display deviation value 4%

Torque wrench with square drive

'

Code

size

50 19 00 81

80

160800 N m

120600 ft.lb

20 N m

20 ft.lb

'

'

D
"

b
mm

h
mm

L
mm

LF
mm

SF
mm

3/4

45

42

1034

938

6102

808.00

Standard MANOSKOP 721


5

1 cut-out type
1 rapid setting
1 dual stop signal
1 twin scales N m/ft.lb
1 the measuring element is only under load while
force is being applied, no need for manual reset
to zero
1 any force applied to the tool after the click or
applied in the opposite direction to the current
function e.g. forcible loosening of a jammed

721

screw - does not act on the trigger mechanism


and cannot cause damage to it.
1 all the sensitive components are protected by
the sturdy tubular steel housing
1 calibration using perfectControl calibrating unit
No 7794 or calibration system No 7706.
Adjustment without disassembly.
1 with certificate
1 display deviation value 4%

Torque wrenches with reversible ratchet

'

Code
'

50 20 00 05
50 20 00 15
50 20 00 30
'

size

5
15
30

650 N m
30150 N m
60300 N m

536 ft.lb
25110 ft.lb
50220 ft.lb

2Nm
5Nm
10 N m

X
1 ft.lb
5 ft.lb
10 ft.lb

D
"

b1
mm

b2
mm

h1
mm

h2
mm

L
mm

LF
mm

3/8
1/2
1/2

28
28
28

27.5
41
44

23
23
23

14.5
18
27.5

352
452
553

293
387
486

900
1395
1720

size 30 with push through square drive for anticlockwise torquing (spare square drive, refer to page 204)
'

188

268.00
277.00
342.00

Standard MANOSKOP 721Nf


1 cut-out type
1 easy setting
1 dual stop signal
1 twin scales N m/ft.lb
1 anticlockwise torquing thanks to swap-over
square drive

721Nf

1 all the sensitive components are protected by


the sturdy tubular steel housing in the U-shaped
aluminium profile
1 calibration using perfectControl calibrating unit
No 7794 or calibration system No 7706.
Adjustment without disassembly.
1 with certificate
1 display deviation value 4%

Torque wrenches with ratchet

'

Code

size

50 20 00 81
96 50 20 01

80
100

160800 N m
2001000 N m

120600 ft.lb
150725 ft.lb

20 N m
25 N m

20 ft.lb
25 ft.lb

'

'

7161

QuickRelease safety lock

D
"

b1
mm

b2
mm

h
mm

L
mm

LF
mm

3/4
3/4

46.5
46.5

76
76

42
42

1051
1504

938
1365

7396

prevents insert tools being swapped.


The system is locked in place on the
head of the torque wrench by means
of a safety screw. Once the
protection system has been fitted,
it is possible to attach an insert tool
but not to remove it because the
QuickRelease unlock button itself is
locked. After the safety screw has
been removed, the torque wrench
reverts to being a standard, versatile tool.
The safety screw can be fitted and removed using a TORX screwdriver
with a central bore in the tip (No 4656, Size T20, Code 46 56 00 20) or a
BITS screwdriver insert with a central bore in the tip (No 1442, Size T20,
Code 08 16 00 20).

for torque wrenches


If light is poor, simply attach this
LED lamp to illuminate the work
site.
Included in the delivery is a 1.5 V
micro battery.
Supplied without torque wrench.

size

54 10 00 70
54 10 00 71

1
2

54 10 00 72

'

for torque wrenches


No
714/1; 714/2; 714/4
712R/6; 713R/6; 714/6; 714/10;
730/10; 730a/10; 730N/10;
730Na/10; 730D/10
713R/20; 713R/40; 714/20;
714/40; 730/12; 730/20; 730/40;
730/65; 730a/12; 730a/20;
730N/12; 730N/20; 730N/40;
730N/65; 730Na/20; 730Na/40;
730D/20; 730D/40; 730D/65

Code
'

54 01 00 04

R
g

5.15

5.15

7222 1070.00
7005 1235.50

'

'

Code

LED lighting

'

'

for torque wrenches


No
712R/6; 713R/6; 713R/20;
713R/40; 714/6; 714/10;
714/20; 714/40; 721/5;
721/15; 721/30; 730/5;
730/10; 730/12; 730/20;
730/40; 730a/5; 730a/10;
730a/12; 730a/20; 730N/5;
730N/10; 730N/12; 730N/20;
730N/40; 730Na/5; 730Na/10;
730Na/20; 730Na/40;
730D/10; 730D/20; 730D/40

R
g

51

80.50

available from June 2014


'

11

5.40

for other torque wrenches on request.


'

189

Torque tools

Industrial MANOSKOP 755


For work on production lines or series production. No setting scale; have to be set with a tester such as
the STAHLWILLE No 7707 W tester or the No 7794, No 7706 calibration system.
function (up to the max. of the wrench's range)
1 cut-out type
does not act on the trigger mechanism and
1 mount for interchangeable insert tools
196203
cannot cause damage to it.
1 dual stop signal
1 anticlockwise torquing thanks to swap-over
1 particularly light and easy to handle
insert tools
1 handle and shank are made of square tubular
1 on request with preset cut-out value
steel
(surcharge 10%)
1 any force applied to the tool after the click or
1 display deviation value 4%
applied in the opposite direction to the current
755R/1

Industrial MANOSKOP

Torque wrench with built-in ratchet, irrespective of the point of application of force, dual stop signal and cut-out. Deviation of indication 4%.
Cut-out setting with aid of Setting Gauge.

'

Code
'

50 10 00 01
'

755

1.512.5 N m

1.09.0 ft.lb

D
"

b
mm

h
mm

L
mm

1/4

22

18

173.5

335

181.00

Basic wrenches with tool carrier for insert tool

'

Code
'

50 01 00 04
50 01 00 10
50 01 00 20
50 01 00 30

size

4
10
20
30

440 N m
20100 N m
40200 N m
60300 N m

430 ft.lb
1574 ft.lb
30147 ft.lb
40220 ft.lb

'

mm

b
mm

h
mm

L
mm

LF
mm

SF
mm

;
;
,
,

22
28
28
28

18
24
24
24

201
318
457
609

172
289
435
587

17.5
17.5
25
25

522
635
1060
1210

Plastic case, empty


'

Code
'

83 07 10 04

'

for torque wrenches


No

No

81 37 00 02

7301 712R/6; 713R/6; 714/1;


714/2; 714/4; 714/6;
714/10; 721/5; 721/15;
730/5; 730/10; 730/12;
730/20; 730a/5; 730a/10;
730a/12; 730a/20; 730N/5;
730N/10; 730N/12; 730N/20;
730Na/5; 730Na/10;
730Na/20; 730D/10
7302 713R/20; 714/20; 721/30;
730/40; 730N/40; 730Na/40;
730D/20

'

81 37 00 03
'

L
mm

83 07 10 02

'

425

16.40

680

535

18.50

712R/6; 713R/6; 721/5; 721/15;


730/5; 730/10; 730/12; 730/20;
730a/5; 730a/10; 730a/12; 730a/20;
730N/5; 730N/10; 730N/12; 730N/20;
730Na/5; 730Na/10; 730Na/20; 730D/10
713R/20; 721/30; 730/40; 730N/40;
730Na/40; 730D/20

88

4.75

113

7.20

i BITS

1299

550

for torque wrenches


No

for inside hexagon screws, for


operating the adjusting screws on
torque wrenches No 720, 721, 730
and 730N.
'

Code
'

08 09 00 02
'

B outside
E

"

L
mm

R
g

1/4

34

10

mm
2

C 6.3

outside E DIN 3126/ISO 1173


'

190

118.00
127.00
130.00
141.00

Inlays for plastic case

for safe storage and transport of


torque wrenches (please order
inlays separately). Supplied without
torque wrench.

Code

3.30

Indicating torque wrenches


Electronic angle-controlled torque wrench Sensotork 713
1 simple, flexible operation thanks to operator
guidance on large-format display
1 very broad measuring range (5% to 100% of
rated value)
1 supplied with insert tool reversible 196203
ratchet, more insert tools
1 QuickRelease safety lock
1 for clockwise and anticlockwise torquing
1 measurements independent of the point of
application of force (sizes 6 and 20)
1 units of measurement: N m, ft.lb, in.lb
1 advance warning points programmable for
visual, tactile and acoustic signals
1 torque and angle are simultaneously visible
1 convenient angle measurement across a very
wide angle range without a reference arm
1 insert tool lengths can be individually set
1 maintenance friendly due to easy adjustment
and automatic reminder of next calibration date

713R

1 repeated joints can be collated to form a single


menu-guided sequence
1 individual identification markings possible
1 password protection to prevent inadvertent
changes and make the tool tamper-proof
1 meets requirements of DKD-R 3-7, Class 2
1 with certificate
1 in sturdy plastic case (size 40 in tough steel
case)
1 supplied with three 1.5 V AA batteries. AA/LR6,
1.2 V NiMH rechargeable cells may also be used
1 fully automated calibration (torque) using
perfectControl calibrating unit No 7794-2.
Adjustment without disassembly.
1 registered design
1 display deviation value for angle 1
1 display deviation value 1%

Electronic angle-controlled torque wrenches Sensotork

'

Code

size

96 50 16 06
96 50 16 20
96 50 16 40

6
20
40

360 N m
10200 N m
20400 N m

2.544 ft.lb
7148 ft.lb
15296 ft.lb

'

'

D
"

mm

b
mm

h
mm

L
mm

R
g

Rg
with box

3/8
1/2
3/4

;
,
,

50
50
50

33.5
33.5
33.5

378
608
838

856
1552
2332

1500
2430
5555

1265.00
1339.00
1467.00

Electronic torque wrench Sensotork 712


712R/6

Electronic torque wrench Sensotork

Registered design, electronic torque wrench with option of attaching interchangeable insert tools, same design as No 713 but without angle function.

'

Code

96 50 15 06

360 N m

'

'

W
2.544 ft.lb

D
"

mm

b
mm

h
mm

L
mm

R
g

Rg
with box

3/8

50

33.5

378

856

1500

1075.00
191

Torque tools

Accessories for electronic angle-controlled torque wrench Sensotork No 713 and


electronic torque wrench Sensotork No 712
7759-1

USB adaptor, jack cable and software SENSOMASTER for No 712R, 713R

for documenting and managing readings on a PC and carrying out statistical analyses.
1 Read out stored wrench data and joint readings: Joint identifier, Tool serial number, Target torque or target angle, Torque level at which the tool cuts
out, Tightening torque or angle reached, Tolerances, Joint evaluation
1 Storage of joint data in a database
1 Delete or print highlighted joints from the
database
1 Export displayed joint data to a CSV file
(compatible with Excel)
1 13 languages
1 User management
1 Define new PIN
1 Delete joint data stored in wrench
System requirements:
1 PC
1 Microsoft Windows 98 SE or compatible
operating system with USB support
1 USB connection
1 Installed ODBC driver for Access data

'

Code

L
m

96 58 36 25

1.5

137

'

'

127.20

MANOSKOP 71
1961 indicating type
1 mount for interchangeable shell tools 203
1 all 14 x 18 mm insert tools can also be
used with insert tool adaptor No 7370/80
(max. 650 N m)
1 trailing pointer dial
1 twin scales N m/ft.lb
1 scale is made of luminescent light yellow special
film enabling clear readings even in poor light
conditions

71/80

1 handle with integrated force compensator


1 measuring element is a bending plate housed in
the handle
1 with overload protection
1 can be applied for either clockwise or anticlockwise tightening by turning the wrench over
1 calibration using perfectControl calibrating unit
No 7794 No 7794 or calibration system
No 7706. Adjustment without disassembly.
1 with certificate
1 display deviation value 4%

MANOSKOP 71 with integrated force compensator

'

Code
'

50 03 00 80
'

192

160800 N m

120600 ft.lb

10 N m

10 ft.lb

mm

b
mm

h
mm

L
mm

LF
mm

SF
mm

28

24

1048

1050

95

2360

927.00

MANOSKOP 71 with permanently installed reversible ratchet


1 indicating type
1 trailing pointer dial
1 twin scales N m/ft.lb
1 scale is made of luminescent light yellow special
film enabling clear readings even in poor light
conditions
1 additional protection for the gauge by the
protective ring
71aR/80

1 not for anticlockwise measurement


1 calibration using perfectControl calibrating unit
No 7794 or calibration system No 7706.
Adjustment without disassembly.
1 with certificate
1 display deviation value 4%

MANOSKOP 71 with integrated force compensator

'

100600 ft.lb

160800 N m

10 ft.lb

10 N m

Code
'

50 45 00 80
'

D
"

b
mm

h
mm

L
mm

LF
mm

3/4

70

30

1152

1060

4280

1089.00

Friction gauge
1 indicating type
1 permanently installed square drive
1 trailing pointer dial
1 no needle wobble during measurements
73Nm/15

1 lighter construction due to use of aluminium


1 with certificate
1 display deviation value 4%

Friction gauge

'

Code
'

50 24 00 15
'

W
215 N m

X
0.5 N m

D
"

b
mm

h
mm

L
mm

LF
mm

SF
mm

1/2

72

50

298.5

250

775

370.00

193

Torque tools

Torque screwdriver
TORSIOMAX 775
1 cut-out type
1 for torque-controlled bolt tightening in the
cN m and in.lb ranges
1 for one-off or production runs
1 measuring element is a screw compression
spring
1 anticlockwise and clockwise tightening
1 with 1/4" internal hex drive
(F 6.3 DIN 3126/ISO1173)
1 infinitely variable via micrometer scale (twist scale)
1 disengaging clutch coupling prevents the preset
value being exceeded
775

1 the shape of the handle and its surface texture


ensure safe and accurate transmission of torque
1 insert tools: For all 1/4" hex E 6.3, Phillips-head
screws, POZIDRIV / SUPADRIV, straight-slot,
TORX, hex BITS (see pp. 167, 168). For very
small joints, BITS with a 4 mm hex drive and an
adapter No 3115/2 for BITS screwdriver inserts,
Type C4, and external hex 1/4"
(E 6.3 DIN 3126/ISO 1173) are required
(refer to pages 162, 165).
1 with certificate
1 display deviation value 6%

Torque screwdriver TORSIOMAX

'

L
mm

inside
Code
'

size

51 06 00 03
51 06 00 12
51 06 00 30
51 06 00 50

31)
122)
302)
502)

230 cN m
20120 cN m
40300 cN m
100500 cN m

0.2 cN m
1 cN m
1 cN m
2.5 cN m

F 6.3
F 6.3
F 6.3
F 6.3

105
157
160
205

99
192
214
436

238.00
253.00
281.00
288.00

51 06 01 00
51 46 00 03
51 46 00 12
51 46 00 50

1003)
a/31)
a/122)
a/502)

4001000 cN m
0.23 in.lb
212 in.lb
1050 in.lb

5 cN m
0.02 in.lb
0.1 in.lb
0.25 in.lb

F 6.3
F 6.3
F 6.3
F 6.3

235
105
157
205

762
99
192
436

430.00
256.00
273.00
324.00

'

) with a swivelling handle-end to improve tool control; and with a clamping screw for locking the preset.
) with an additional locking mechanism to prevent the selected torque being inadvertently adjusted.
3
) with screw-on handles for increasing the force applied for large torques.
1
2

'

Note!
Torque tightening tools are measuring instruments.
They must be regularly calibrated with suitable instruments and adjusted accordingly (see DIN EN ISO 6789, 5.3 Recalibrating).
'

194

TORSIOMETER 760
1 indicating type
1 the measuring element is a torsional leaf spring
1 clockwise tightening (with trailing pointer) and
anticlockwise tightening
1 with 1/4" internal hex drive (F 6.3 DIN 3126)
1 comparative scale in in.lb and cursor
1 inserts and adaptors with external hex E 6.3
760

(1/4") DIN 3126/ISO 1173 are securely held and


firmly controlled in the mounting shaft (for BITS
screwdriver inserts, refer to pages 167, 168).
1 to attach 1/4" sockets, please order adaptor
No 3115 (refer to page 166)
1 with certificate
1 display deviation value 4%

Torque screwdrivers TORSIOMETER

'

L
mm

F 6.3
F 6.3
F 6.3
F 6.3

185
185
185
185

225
225
230
230

inside
Code
'

51 04 00 07
51 04 00 15
51 04 00 30
51 04 00 60
'

size

7.5
15
30
60

1575 cN m
30150 cN m
60300 cN m
120600 cN m

1.56.5 in.lb
313 in.lb
626 in.lb
1252 in.lb

2.5 cN m
5 cN m
10 cN m
20 cN m

229.00
243.00
235.00
245.00

STAHLWILLE is an accredited calibrating laboratory.


5

Controlled tightening is a must in terms of safety and the


lifetimes of the screws and bolts.STAHLWILLE has been awarded
accreditation as a calibrating laboratory for torque by the
German Accreditation Body (DAkkS) because of the Companys
skills in the field of torque controlled tightening.
1 Included in the price of calibration of STAHLWILLE products are

the costs of any adjustment required and a second calibration


operation.
1 In addition, the STAHLWILLE calibration service provides complete
monitoring, documentation archiving and follow-up timing for
torque wrenches and testers.
1 Additional information on these services is available on request.

The STAHLWILLE calibration service is in a


position to offer both the usual works calibration
certificate and the DAkkS certificate.

195

Torque tools, insert/shell tools


Which insert tool for which torque wrench?

Size

Size

mm

1
2
4
5
6
10
12
20
30
40
65
II/65
80
80
100

a/2
a/4
a/5

a/10
a/12
a/20

a/40

;
;
;
;
;
;
,
,
,
,
,
.

Size

Size

mm

1
2
4
5
6
10
12
20
30
40
65
II/65
80
80
100

a/2
a/4
a/5

a/10
a/12
a/20

a/40

;
;
;
;
;
;
,
,
,
,
,
.

714

725QR
4

725B 725L
4/5
5

725
4

735
5

10

10

20

734
4

10

40

40HD

735
80

735
100

20

40

734
80

1
1

.
.

734F
4/5

734L
5

731
10

732G
10

732TX
10

731
80

731
100

732
10

732
100

736
10

40

732
80

733
10

40

755

Industrial MANOSKOP
Cut-out

71

Torque Wrench MANOSKOP


Indicating

40

100

1
1

730D Service/Industrial MANOSKOP


Cut-out, indicating

Service MANOSKOP
Cut-out

737
10

Electromechanical torque and angle-controlled wrench MANOSKOP


Cut-out, indicating

730

40

.
.

730N Service MANOSKOP


Cut-out

40

734
100

713R Electronic angle-controlled Torque Wrench Sensotork


Indicating

196

20

Insert/shell tools
for torque wrenches

725/4

Ratchet insert tool

reversible, 22 teeth.

Output square drive D in accordance with DIN 3120.


Long-term loading of the input and output square
drive is in accordance with DIN EN ISO 6789:2003.
This limit must not be exceeded if larger torque
wrenches and tool holders are used.

'

Code

"

mm

b
mm

h
mm

S
mm

M R
Nm g

1/4

22

14.5

17.5

40 62

'

58 25 40 04
'

725QR

735

QuickRelease ratchet insert tool

62.50

Ratchet insert tools, fine tooth

reversible, 60 teeth.

reversible, with QuickRelease safety lock, size 4: 22 teeth,


sizes 5 and 10: 30 teeth, size 20: 36 teeth.

'

'

Code
'

size

58 25 30 04 4
58 25 30 05 5
58 25 30 10 10
58 25 30 20 20
'

"

mm

1/4
3/8
1/2
1/2

;
;
;
,

M R
Nm g

b
h
mm mm

S
mm

22
29
29
41

17.5
40 60
28*
100 130
28*
100 141
38.5* 200 325

14.5
14.5
14.5
18

Code
'

82.00
82.50
82.50
89.50

* Caution! Modified settings on torque wrench (refer to note on page 207).


'

b
mm

h
mm

S
mm

M
Nm

;
;
,
,
,

33
33
43
50

24
24
26
31.5

17.5
17.5
25
25

100
100
300
400

155
147
302
510

58

36

30*

650

737 123.00

size "

58 25 00 05
58 25 00 10
58 25 00 20
58 25 00 40

5
10
20
40

mm

3/8
1/2
1/2
3/4

58 25 00 65 40HD 3/4
'

67.00
69.00
72.00
107.00

* Caution! Modified settings on torque wrench


(refer to note on page 207).

'

725B

Bit ratchet insert tool

reversible, with inside hexagon, 1/4" or 5/16", DIN 3126/ISO 1173 D 6.3 or
D8, for direct acceptance of bits 1/4" or 5/16" outside hexagon C 6.3 (size 4:
22 teeth, size 5: 30 teeth).
Internal hex drive with a collar-thrust spring. Bits are easy to insert, lock
securely in position and can be removed just as easily; even hex bits with
a wide groove (Type E, DIN 3126/ISO 1173). Supplied without bits.

735/80

Ratchet shell tool

with push through square drive, 30 teeth.

35

b
S
'

Code

"

'

58 25 00 80
'

mm

3/4

b
mm

h
mm

S
mm

76

43

95

2000

377.00

'

Code
'

58 25 50 04
58 25 50 05

size

inside
b"

4
5

1/4
5/16

'

mm

b
mm

;
;

22
29

S
mm

14
17.5
14.5 28*

54
117

h
mm

735/100

61.00
83.50

* Caution! Modified settings on torque wrench (refer to note on page 207)

Ratchet insert tool

U
with push through square drive, 30 teeth.

'

725L/5

Ratchet insert tool

reversible, 30 teeth.
Caution! Modified settings on torque wrench (refer to note on p. 207).
This ratchet insert tool has the same extension length as ring insert tool
No 732G/10 (see p. 200) and square drive insert tool No 734L/5
(see p. 198).

h
S

'

Code
'

58 25 01 00
'

D
"

mm

b
mm

h
mm

S
mm

3/4

76

42

55

1915

377.00

'

Code
'

58 15 10 05
'

D
"

mm

b
mm

h
mm

S
mm

3/8

27.5

14.5

45

164

90.00
197

Insert/shell tools
734

Square drive insert tools

731/10

Open ended insert tools

'

Code

size

'

mm

;
;
;
,
,

58 24 00 04
58 24 00 05
58 24 00 10
58 24 00 20

4
5
10
20

58 24 00 40

40

3/4

'

734/80

b
h
mm mm

"

1/4
3/8
1/2
1/2

S
mm

M
Nm

'

20
20
20
27

14
14
14
18

17.5
17.5
17.5
25

40
80
100
300

71
76
82
203

26.80
26.80
27.50
29.80

40

25

25

650

396

49.20

Square drive shell tool

mm

mm

58 21 10 07
58 21 10 08
58 21 10 09
58 21 10 10

7
8
9
10

58 21 10 11
58 21 10 12
58 21 10 13
58 21 10 14

11
12 1)
13
14

58 21 10 15
58 21 10 16
58 21 10 17
58 21 10 18

15
16
17
18

58 21 10 19

19

;
;
;
;
;
;
;
;
;
;
;
;
;

'

35

'

'

Code

"

'

mm

3/4

58 24 00 80
'

Code

h
mm

S
mm

22
22
26
26

5
5
5.5
5.5

17.5
17.5
17.5
17.5

40
39
38
42

31.60
28.70
31.60
28.00

26
30
30
35

5.5
7
7
8

17.5
17.5
17.5
17.5

41
43
48
52

28.50
29.30
28.00
28.00

35
38
38
42

8
8.5
8.5
9

17.5
17.5
17.5
20*

51
58
60
71

28.50
28.00
28.00
28.20

42

20*

74

28.00

b
mm

) For flare nuts of hydraulic pipes on French vehicles

b
mm

h
mm

S
mm

42

42

95

1200

'

731a/10

160.00

Open ended insert tools

'

734/100

Square drive insert tool

mm

58 61 10 16
58 61 10 20
58 61 10 24
58 61 10 28

1/4
5/16
3/8
7/16

58 61 10 32
58 61 10 34
58 61 10 36
58 61 10 38

1/2
9/16
5/8
11/16

58 61 10 40

3/4

;
;
;
;
;
;
;
;
;

S
'

Code
'

58 24 01 00
'

734F

"

mm

b
mm

h
mm

S
mm

3/4

43

42

55

1171

'

S
mm

22
22
26
26

5
5
5.5
5.5

17.5
17.5
17.5
17.5

36
53
38
37

30.10
30.10
30.10
30.10

30
35
38
42

7
8
8.5
9

17.5
17.5
17.5
20*

44
49
64
76

30.10
30.10
30.10
30.10

42

20*

73

30.10

731/40

Open ended insert tools

Square drive insert tools

'

Code

size

58 24 10 04
58 24 10 05

4
5

'

734L/5

D
"

mm

b
mm

h
mm

S
mm

1/4
3/8

;
;

22
22

14
14

17.5
17.5

72
75

58 21 40 13
58 21 40 14
58 21 40 15
58 21 40 16

13
14
15
16

58 21 40 17
58 21 40 18
58 21 40 19
58 21 40 21

17
18
19
21

58 21 40 22
58 21 40 24
58 21 40 25
58 21 40 27

22
24
25
27

58 21 40 30
58 21 40 32
58 21 40 34
58 21 40 36

30
32
34
36

58 21 40 38
58 21 40 41

38
41

Square drive insert tool

Caution! Modified settings on torque wrench (refer to note on p. 207). This


square-drive insert tool has the same extension length as ring insert tool
No 732G/10 (see p. 200) and ratchet insert tool No 725L/5 (see p. 197).

mm

35.30
35.30

S
'

Code
'

58 24 20 05

D
"

mm

b
mm

h
mm

S
mm

3/8

20

14

45

141 60.00

Code
'

'

'

h
S

198

h
mm

b
mm

156.00

with permanently attached, captive square drive.

'

"

'

U
5

Code

'

b
mm

h
mm

S
mm

,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,

30
35
35
38

7
8
8
9

25
25
25
25

128
129
132
140

32.80
32.80
36.30
32.60

38
42
42
50

9
10
10
11

25
25
25
25

136
147
145
171

32.00
32.60
32.00
39.50

50
53
53
60

11
12
12
13

25
25
25
30*

165
167
170
219

38.80
38.80
43.70
38.80

66
66
66
74

14
14
14
15

30*
32.5*
32.5*
32.5*

245
246
239
275

43.40
43.40
49.00
46.40

74
82

15
15

32.5*
36.5*

265
307

48.90
49.30

mm

* Caution! Modified settings on torque wrench


(refer to note on page 207)
'

731a/40

Open ended insert tools

732/10

A
"

mm

b
mm

h
mm

S
mm

58 61 40 28
58 61 40 32
58 61 40 34
58 61 40 36

7/16
1/2
9/16
5/8

30
30
35
38

7
7
8
9

25
25
25
25

127
125
129
136

35.40
35.40
35.40
35.40

58 61 40 38
58 61 40 40
58 61 40 42
58 61 40 44

11/16
3/4
13/16
7/8

,
,
,
,
,
,
,
,
,
,
,

42
42
50
50

10
10
11
11

25
25
25
25

148
144
171
165

35.40
35.40
41.60
41.60

Code
'

15/16

58 61 40 46
58 61 40 48
58 61 40 52

1
1 1/8

'

12
13
14

25
30*
30*

177
224
258

41.60
41.60
41.60

* Caution! Modified settings on torque wrench


(refer to note on page 207)

h
S

'

Code

mm

mm

b
mm

h
mm

S
mm

58 22 10 07
58 22 10 08
58 22 10 10
58 22 10 11

7
8
10
11

13
14.2
17.2
18.5

8
8
9
9

17.5
17.5
17.5
17.5

37
40
44
41

31.20
30.30
30.40
31.20

58 22 10 12
58 22 10 13
58 22 10 14
58 22 10 15

12
13
14
15

20.5
21.5
22.5
24.5

11
11
11
12

17.5
17.5
17.5
17.5

49
55
52
52

31.20
30.40
31.20
30.30

58 22 10 16
58 22 10 17
58 22 10 18
58 22 10 19

16
17
18
19

26
27
28
30.5

12
13
13
13

17.5
17.5
17.5
17.5

54
59
56
65

30.40
30.40
30.40
30.40

58 22 10 21
58 22 10 22

21
22

;
;
;
;
;
;
;
;
;
;
;
;
;
;

33
34.5

15
15

17.5
17.5

71
74

31.90
30.40

'

731/80

'

53
60
66

Ring insert tools

'

Open ended shell tools

'

'

b
mm

h
mm

S
mm

24
27
30
32

50
56
63
67

13
14
15
15

95
95
95
95

601
620
655
670

157.00
161.00
163.00
163.00

58 21 80 34
58 21 80 36
58 21 80 41
58 21 80 46

34
36
41
46

72
74
84
94

15
15
16
17

95
95
95
95

699
740
810
867

163.00
168.00
168.00
171.00

58 21 80 50
58 21 80 55
58 21 80 60

50
55
60

104
114
124

18
19
20

95
95
95

1010
1150
1330

175.00
180.00
184.00

Code

mm

58 21 80 24
58 21 80 27
58 21 80 30
58 21 80 32

'

mm

'

732a/10

P
'

"

mm

b
mm

h
mm

S
mm

58 62 10 16
58 62 10 20
58 62 10 24
58 62 10 28

1/4
5/16
3/8 1)
7/16

13
14.2
17.2
18.5

8
8
9
9

17.5
17.5
17.5
17.5

36
37
37
40

31.00
31.00
31.00
31.00

58 62 10 32
58 62 10 34
58 62 10 36
58 62 10 38

1/2
9/16
5/8
11/16

21.5
22.5
26
28

11
11
12
13

17.5
17.5
17.5
17.5

53
52
54
58

31.00
31.00
31.00
31.00

58 62 10 40
58 62 10 42
58 62 10 44

3/4
13/16
7/8

;
;
;
;
;
;
;
;
;
;
;

30.5
33
34.5

13
15
15

17.5
17.5
17.5

58
68
69

31.00
32.60
32.60

Code
'

731/100

Open ended insert tools

Ring insert tools

'

) For Volvo aero-engines, types JAS

1
'

h
S

'

Code

mm

mm

b
mm

h
mm

S
mm

58 21 10 24
58 21 10 27
58 21 10 30
58 21 10 32

24
27
30
32

50
56
63
67

13
14
15
15

55
55
55
55

628
648
695
713

46.00
49.00
51.00
54.00

58 21 10 34
58 21 10 36
58 21 10 41
58 21 10 46

34
36
41
46

72
74
84
94

15
15
16
17

55
55
55
55

739
727
902
952

57.00
60.00
95.00
98.00

58 21 10 50
58 21 10 55
58 21 10 60

50
55
60

.
.
.
.
.
.
.
.
.
.
.

104
114
124

18
19
20

55
55
55

1074
1174
1230

100.00
103.00
106.00

'

'

199

Insert/shell tools
732/40

Ring insert tools

732aG/10

Ring insert tools

P Q

P
b

Caution! Modified settings on torque wrench (refer to note on p. 207).


This insert tool has the same extension length as insert tool No 725L/5
(see p. 197) and square-drive insert tool No 734L/5 (see p. 198);
HPQ high performance steel, gunmetal finish.

h
S

'

"

mm

b
mm

58 62 12 16
58 62 12 20
58 62 12 24
58 62 12 28

1/4
5/16
3/8
7/16

58 62 12 32
58 62 12 34
58 62 12 36

1/2
9/16
5/8

;
;
;
;
;
;
;

10.4
12.4
14.9
17

'

Code

mm

mm

58 22 40 13
58 22 40 14
58 22 40 15
58 22 40 16

13
14
15
16

58 22 40 17
58 22 40 18
58 22 40 19
58 22 40 21

17
18
19
21

58 22 40 22
58 22 40 24
58 22 40 27
58 22 40 28

22
24
27
28

58 22 40 30
58 22 40 32
58 22 40 34
58 22 40 36

30
32
34
36

58 22 40 41

41

,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,

'

'

b
mm

h
mm

S
mm

22.5
23
24
25.5

11
11
11
12

25
25
25
25

130
123
128
133

32.90
32.90
33.60
32.90

27
29
30.5
33

12
13
13
15

25
25
25
25

135
134
138
144

32.90
32.90
32.90
39.20

34.5
37.5
42.5
45.5

15
15
17
19

25
25
25
25

145
153
162
175

39.20
39.20
39.20
47.80

46
47.5
52
54

19
19
19
19

25
25
28*
28*

182
181
210
203

44.30
44.30
47.80
45.40

60

20

30*

240

45.40

Code

'

* Caution! Modified settings on torque wrench


(refer to note on page 207).

Ring insert tools

'

A
"

mm

b
mm

h
mm

S
mm

58 62 40 32
58 62 40 34
58 62 40 36
58 62 40 38

1/2
9/16
5/8
11/16

22.5
23
25.5
29

11
11
12
13

25
25
25
25

122
122
134
132

37.90
36.20
36.20
36.20

58 62 40 40
58 62 40 42
58 62 40 44
58 62 40 46

3/4
13/16
7/8
15/16

30.5
33
34.5
37.5

13
15
15
15

25
25
25
25

138
142
147
151

36.20
43.20
43.20
43.20

58 62 40 48

,
,
,
,
,
,
,
,
,

41

17

25

160

43.20

'

'

732G/10

'

mm

b
mm

58 62 00 07
58 62 00 08
58 62 00 09
58 62 00 10

7
8
9
10

58 62 00 13

13

;
;
;
;
;

'

200

45
45
45
45

28
31
42
43

30.70
30.70
30.70
31.70

9.2
9.2
12

45
45
45

58
58
74

31.70
28.80
31.70

Ring shell tools

b
mm

h
mm

S
mm

24
27
30
32

36
40.5
46
49

15
15
16
16

95
95
95
95

605
610
630
635

165.00
165.00
169.00
169.00

58 22 80 34
58 22 80 36
58 22 80 41
58 22 80 46

34
36
41
46

52
54
61
66

17
17
18
19

95
95
95
95

650
650
675
720

169.00
172.00
180.00
176.00

58 22 80 50
58 22 80 55
58 22 80 60

50
55
60

75
84
93

20
21
22

95
95
95

803
889
995

176.00
178.00
178.00

b
mm

h
mm

S
mm

36
40.5

14
14

95
95

604
608

Code

mm

58 22 80 24
58 22 80 27
58 22 80 30
58 22 80 32

mm

'

732a/80

Ring shell tools

P
'

Caution! Modified settings on torque wrench (refer to note on p. 207).


This insert tool has the same extension length as insert tool No 725L/5
(see p. 197) and square-drive insert tool No 734L/5 (see p. 198);
HPQ high performance steel, gunmetal finish.

732/80

Code

mm

6
6
8
8

'

P Q

'

'

Ring insert tools

Code

S
mm

for assembling and dismantling aero-engines.

'

P
Code

'

19
21
23

h
mm

'

'

732a/40

h
mm

S
mm

11.5
12.4
14
15.6

6
6
8
8

45
45
45
45

31
33
40
44

29.20
29.20
29.20
29.20

19.3

9.2

45

60

30.20

58 62 80 46
58 62 80 50
'

"

15/16 1)
1 1/16 1)

mm

) for jet engine pins (Airbus A320/A321)

1
'

175.00
175.00

732/100

Ring insert tools

733/10

P U
b

Open ring insert tools

P
h

S
'

Code

mm

mm

b
mm

h
mm

S
mm

58 22 10 24
58 22 10 27
58 22 10 30
58 22 10 32

24
27
30
32

43
43
46
49

15
15
16
16

55
55
55
55

629
619
632
625

46.00
49.00
51.00
54.00

58 22 10 34
58 22 10 36
58 22 10 41
58 22 10 46

34
36
41
46

52
54
61
66

17
17
18
19

55
55
55
55

638
631
642
640

57.00
60.00
95.00
98.00

58 22 10 50
58 22 10 55
58 22 10 60

50
55
60

.
.
.
.
.
.
.
.
.
.
.

75
84
93

20
21
22

55
55
55

713
791
885

100.00
103.00
106.00

'

'

732TX/10

'

TORX insert tools

Code

mm

mm

b
mm

h
mm

W
mm

S
mm

58 23 10 10
58 23 10 11
58 23 10 12
58 23 10 13

10
11
12
13

11
11
12
12

7.1
8.6
9
10

17.5
17.5
17.5
17.5

57
55
59
55

32.10
32.10
32.10
32.10

58 23 10 14
58 23 10 16
58 23 10 17
58 23 10 18

14
16
17
18

27
30.5
31.5
33

13
13
13
15

11
13
14
14.8

17.5
17.5
17.5
17.5

60
65
64
74

32.10
33.10
32.10
34.80

58 23 10 19
58 23 10 21
58 23 10 22
58 23 10 24

19
21
22
24

;
;
;
;
;
;
;
;
;
;
;
;

21.5
22.5
24.5
26

34
38.5
39.5
40

15
15
15
15

15.8
16.2
17
18

17.5
20*
20*
20*

80
88
92
75

32.10
34.80
32.10
32.10

'

'

* Caution! Modified settings on torque wrench


(refer to note on page 207)
'

733a/10

'

b
mm

h
mm

S
mm

13
14.2
17.2
18.5

8
8
9
9

17.5
17.5
17.5
17.5

40
45
45
50

29.60
29.60
29.60
29.60

21.5

11

17.5

60

29.60

Code

size

mm

58 29 10 06
58 29 10 08
58 29 10 10
58 29 10 12

E6
E8
E10
E12

58 29 10 14

E14

;
;
;
;
;

'

'

732TX/40

Open ring insert tools

'

TORX insert tools

"

mm

b
mm

h
mm

W
mm

S
mm

58 63 10 24
58 63 10 28
58 63 10 32
58 63 10 34

3/8
7/16
1/2
9/16

21.5
22.5
26
27.5

11
11
12
13

7.1
8.6
9.5
11

17.5
17.5
17.5
17.5

55
56
58
59

34.80
34.80
34.80
34.80

58 63 10 36
58 63 10 38
58 63 10 40

5/8
11/16

;
;
;
;
;
;
;

30.5
33
34

13
15
15

12.7
14
15.8

17.5
17.5
17.5

61
48
76

34.80
35.70
35.70

Code
'

3/4

'

736

BIT holder insert tools

Internal hex drive with a collar-thrust spring. Bits are easy to insert, lock
securely in position and can be removed just as easily; even hex bits with
a wide groove (Type E, DIN 3126/ISO 1173).
'

Code

size

mm

b
mm

h
mm

S
mm

58 29 40 14
58 29 40 18
58 29 40 20
58 29 40 24

E14
E18
E20
E24

,
,
,
,

22.5
24
29
30.5

11
11
13
13

25
25
25
25

130
135
150
150

'

'

39.20
39.20
39.20
44.30
'

"

mm

b
mm

5/16
1/4
5/16

;
;
,

16
14
16

inside

Code

size

58 26 10 10
58 26 26 10
58 26 10 40

10
D8
10-1 D 6.3
40
D8

'

'

S
mm

12.5 17.5
10
17.5
12.5 25

47
45
112

h
mm

30.20
30.70
41.20

inside b DIN 3126/ISO 1173


'

201

Insert/shell tools
737

Blank end insert tools

7370/10-2

gunmetal finish. To prevent damage from excessive temperatures, the


locking pin, spring and washer are not fitted until the welding work has
been completed. Instructions are supplied.

Adaptor

for use with insert tools with a lateral dovetail profile in torque wrenches
with 9 x 12 mm internal square drives.
Caution! Modified settings on torque wrench (refer to note on p. 207).

'

mm

b
mm

h
mm

S
mm

23.5

9.5

24

51

'

Code
'

mm

H
mm

;
,
.

14.5
21.5
32

Welding surface
size
h x b mm

58 27 00 10 10
58 27 00 40 40
58 27 01 00 100 U
'

7370/10

8 x 14
11 x 25
15 x 50

L
R
mm g
8
12
24

35
98
521

Code
'

22.70
28.60
77.00

58 29 00 12
'

7370/40-2

58.50

Adaptor

for use with insert tools with a lateral dovetail profile in torque wrenches
with 14 x 18 mm internal square drives.
Caution! Modified settings on torque wrench (refer to note on p. 207).

Adaptor

for using insert tools with an outer square drive of 14 x 18 mm on torque


wrenches with an internal square drive of 9 x 12 mm.
Caution! Modified settings on torque wrench (refer to note on p. 207).

'

Code

'

58 29 00 42

'

'

Code
'

58 29 00 10
'

mm

mm

; ,

7370/40

b
mm

h
mm

S
mm

31

26

30.5

114

7370/40-1
48.10

Adaptor

mm

b
mm

h
mm

S
mm

31.5

9.5

34.6

138

66.00

Adaptor

for using shell tools with an internal square drive of 24.5 x 28 mm on


torque wrenches with an internal square drive of 14 x 18 mm.
Caution! Modified settings on torque wrench (refer to note on p. 207).

for using insert tools with an outer square drive of 9 x 12 mm on torque


wrenches with an internal square drive of 14 x 18 mm.
Caution! Modified settings on torque wrench (refer to note on p. 207).

'

Code
'

58 29 00 41
'

7370/80

mm

mm

L
mm

66

251

57.50

Shell adaptor

'

Code
'

58 29 00 40
'

mm

mm

, ;

b
mm

h
mm

S
mm

28

21

21.5

115

for attaching 14 x 18 mm insert tools.


Caution! Modified settings on torque wrench (refer to note on p. 207).

76.50

'

Code
'

58 29 00 80
'

202

mm

mm

b
mm

h
mm

S
mm

36

26

70

281

153.00

7370/100

Adaptor

Tool holder

U
for using shell tools with an internal square drive of 24.5 x 28 mm on
torque wrenches with an internal square drive of 22 x 28 mm.
Caution! Modified settings on torque wrench (refer to note on p. 207).

with tool carrier to receive


insert/shell tools
(without torque function).

'

Code

No

18 20 00 01
18 21 00 01
18 22 00 03

1820
1821
1822

'

mm

mm

L
mm

;
,

382.5
575
1000

490
720
2000

'

48.10
61.50
225.00

7380N/7385N Torque angle gauges


'

Code

S
mm

58 29 11 00

100

'

'

730R/40/32

mm

mm

L
mm

85

563

108.00

Torque wrench set

32 pieces, in steel case, for general


service work.
Content:
1 SERVICE-MANOSKOP
No 730/40, 80400 N m
1 ratchet insert tool
No 735/20, reversible,
1/2" D-drive
1 square drive insert tool
No 734/20, 1/2" D-drive
7 o/e insert tools
No 731/40, sizes 13, 15, 17, 19, 22, 27, 30 mm
1 No 3731/40 size 24 mm;
7 ring insert tools No 732/40, sizes 13, 15, 17, 19, 22, 24, 27 mm
10 sockets, bi-hexagon No 50, sizes 13, 14, 15, 17, 19, 22, 24, 27, 30,
32 mm
4 accessories, 1/2" a-drive:
1 T-handle No 506
1 extension 255 mm No 509/10
1 extension 130 mm No 509/5
1 extension 55 mm No 509/2

for angle controlled bolt/screw tightening, with static read-off point. Readoff possible from any angle thanks to a pair of angled scales. Removable
magnet for attaching sockets with 1/2" internal square drive. For use in
conjunction with tightening tools such as Service MANOSKOP No 730N.
Since this tightening method requires a pre-determined snug torque to be
applied, it is essential to choose a torque wrench covering both snug
torque as well as maximum torque required to reach the recommended
tightening angle. Whether 1/2" or 3/4" sq.dr. Torque Angle Gauge is used
depends upon the square drive of the appropriate torque wrench
employed.

'

Code
'

No

54 01 00 01 7380N
54 01 00 02 7385N
'

a D
"

"

1/2 1/2
3/4 3/4

W X mm mm mm
360
360

2
2

78
78

43 416 494 114.00


76 416 720 147.00

'

Code
'

96 50 20 53
'

9739

1313.45

Ratchet spare parts sets for torque wrenches No 721/580


'

Code

No

Content

59 19 10 05

7210/5

19 04 00 00

5120 + 7210/15

59 19 10 30

7210/30

59 19 10 80

7210/80

For ratchet/torque wrench No 721/5:


1 pinion, 1 pawl, 1 switch-over button and pin, 1 ball, 2 compression springs, 2 screws
For ratchet/torque wrench No 721/15:
1 pinion, 1 pawl, 1 lever, 1 lever pin, 1 ball, 2 compression springs, 2 screws
For ratchet/torque wrench No 721/30:
1 pinion, 1 pawl, 1 lever, 1 lever pin, 1 ball, 2 compression springs, 2 screws
For ratchet/torque wrench No 721Nf/80, 721Nf/100, 735/80, 735/100:
1 pinion, 2 pawls, 2 spring contact points, 2 compression springs

'

'

R
g

53

25.80

127

27.40

134

38.30

448

140.00

203

Insert/shell tools

Sets of spare parts for ratchet insert


tools No 725QR, No 735

7350/20

Set of spare parts

Content:
1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.
'

4150QR

Spare parts set

Code

for No

59 25 10 20

735/20

'

Content:
1 pinion; 1 pawl; 2 lever with pin; 1 ball; 2 compression springs;
2 screws M 1.7 x 8; 1 cover plate

'

Code

for No

19 01 10 20

725QR/4

'

'

4350QR

S
1

29.30

Spare parts set

Content:
1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws

for No

19 02 00 20

725QR/5

'

'

Code

for No

59 25 10 40

735/40

219

37.50

for ratchets from 5/97


'

7350/40HD

Set of spare parts

51

29.30

'

Spare parts set

Code

for No

59 25 10 65

735/40HD

'

7250QR/10

Content:
1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.

'

'

30.40

Set of spare parts

'

Code

Content:
1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.

'

146

'

7350/40

24

for ratchets from 4/96

'

'

300

49.80

Content:
1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws

70V

Square drive units

for torque wrenches and insert tools.

'

Code

for No

19 04 10 20

725QR/10

'

'

5120QR

R
g

64

28.70
'

Spare parts set

a
"

b
"

L
mm

R
g

71...V/1
734/4
734/5
734/10

1/4
3/8
3/8
3/8

1/4
1/4
3/8
1/2

17.5
22
25.8
30

5
12
17
28

5
5
5
5

11.90
13.20
10.20
12.40

720/30; 734/20
721/30
734/40
720Nf/80;
721Nf/80+100

1/2
1/2
3/4

1/2
1/2
3/4

33.5
44.3
52.2

39
52
138

5
5
5

7.65
9.65
18.80

3/4

3/4

65

179

19.80

3/4

3/4

88

240

22.20

Code

size

for No

Content:
1 pinion, 1 pawl, 1 lever with pin, 1 ball, 2 compression springs, 2 screws

59 01 00 01
59 01 00 14
59 01 00 03
59 01 00 05

1
11
3
5

'

1
'

Code

for No

19 04 00 20

725QR/20

'

'

R
g

127

30.30

59 01 00 11 502 1/2
59 01 00 07
7
59 01 00 08
8
59 01 00 15 12
1

7350/5

59 01 00 16

Set of spare parts

Content:
1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.
'

'

Code

for No

59 25 10 05

735/5

'

'

R
g

85

'

27.80

'

Set of spare parts

Content:
1 pinion, 1 pawl, 1 switching disk, 1 spring, 3 screws.
'

Code

for No

59 25 10 10

735/10

'

'

for ratchets from 12/97


'

204

R
g

96

720Nf/80;
721Nf/80+100;
734/40; 734/80;
734/100; 735/80;
735/100

* extra-long, firmly locked, so usable from both sides

for ratchets from 12/97

7350/10

16*

30.50

MULTIPOWER
Makes child's play of the largest torques.
MULTIPOWER or really tough work.
STAHLWILLE MULTIPOWER torque multipliers with planetary gears take the fatigue out of tightening or
loosening stiff or large bolt connections. A long lever is not necessary.
STAHLWILLE MULTIPOWER multiplies human strength; steady torque transfer is easy on nuts and bolts.
Even the largest torques are transferred with ease and precision over long periods.
Accordingly, construction materials and workmanship are extremely robust.
When combined with STAHLWILLE torque wrenches, MULTIPOWER really shows its strength.
The MULTIPOWER range extends to 5000 N m/3687 ft.lb.
MULTIPOWER tools are also available on request up to 12000 N m/8850 ft.lb.
The MULTIPOWER from 2000 N m are fitted with an anti-backlash device.

MULTIPOWER
with overload protection and planetary gears, in carrying case, with spare hex. for overload device, deviation of indication 5%.

'

ft.lb1) N m2)

ft.lb2)

Gear
ratio

Torque
ratio

b
mm

h
mm

L
mm

Rg
with box

MP300-800
800
MP300-1350 1350
MP300-2000*) 2000
MP300-3000*) 3000

590
996
1475
2212

229
375
160
240

169
277
118
177

4:1
4:1
16 : 1
16 : 1

1 : 3.5
1 : 3.6
1 : 12.5
1 : 12.5

1/2
3/4
1/2
3/4

3/4
3/4

66
90
95
95

85
106
161
161

215
265
330
330

2000
3400
7000
7000

5838
7500
11000
10805

696.00
1016.00
2412.00
2859.00

53 03 50 00 MP300-5000*) 5000

3687

294

217

20 : 1

1 : 17.0

3/4

1 1/2 120

180

400

10400

14000

4054.00

Code

No

53 03 08 00
53 03 13 50
53 03 20 00
53 03 30 00

'

N m1)

'

"

"

1
1

MULTIPOWER tools are also available on request up to 12000 N m/8850 ft.lb.


1
2
*) with anti-backlash device
) max. output
) max. input
'

Spares for MULTIPOWER


Sun wheel with overload cutout

Replacement square drives


drilled, for STAHLWILLE MULTIPOWER STW 390STW 393 (until 1996).
'

Code

No

59 30 39 11
59 30 39 21
59 30 39 31

STW 391-700 *
STW 392-70
STW 393-70

'

'

'

No

for No

59 03 08 00
59 03 13 50
59 03 20 00
59 03 30 00
59 03 50 00

SR300-800
SR300-1350
SR300-2000
SR300-3000
SR300-5000

MP300-800
MP300-1350
MP300-2000
MP300-3000
MP300-5000

45
106
120
130
127

122.00
122.00
122.00
122.00
122.00

59 30 00 39
59 30 00 67
59 30 00 68
59 30 00 69
59 30 00 70

SR290N
SR295N
SR391N
SR392N
SR393N

STW 290N
STW 295N
STW 391N
STW 392N
STW 393N

41
95
95
105
105

122.00
122.00
122.00
122.00
122.00

'

89
232
252

221.00
187.00
174.00

* also for STW 390

Code
'

'

205

MULTIPOWER
MP100-1500 MULTIPOWER
1 particularly compact construction
1 light and easy to handle
1 with ratchet function
1 working angle 8
1 with rotary scale
1 for use with a torque wrench with a fixed 1/2" square
drive

1 patents applied for


1 in carry-case
included in the set: 3 hexagon inserts sizes 30; 32;
36 mm, 1 insert with 1" outer square drive,
1 reaction arm 400 mm
1 display deviation value 5%

'

Code

N m1)

ft.lb1)

N m2)

ft.lb2)

Gear
ratio

Torque
ratio

a
"

b
mm

h
mm

L
mm

R
g

Rg
with box

96 53 15 00

1500

1106

300

221

5.62 : 1

1:5

1/2

105

30

165

1890

3630

'

'

) max. output
) max. input

1
2
'

206

3106.80

This is how to achieve the correct tightening torque


even if you are using inserts with an extension
When you tighten fasteners using inserts whose extension length S
deviates from the standard length SF, it is necessary to recalculate the
setting/display value for the torque wrench in use.

MA LF

WK =

LK

MA = desired tightening torque

Nm mm
mm

= extension of STAHLWILLE inserts or


special tools (see dimension table
for inserts)

WK = adjusted reading
or setting value WK & MA

SF

= standard extension (see dimension table


for torque wrenches)

LF

YS = total of all extensions of the attached


inserts
Sadapter + Sinsert +

W = reading/setting W = MA

MA LF

WK =

Caution! If adapters are combined with inserts or special tools,


use the sum of the extensions = Y S. Where the special tool is angled
to the side, WK will have to be determined empirically.

LF - SF + S (or S)

= functional length (see dimension


table for torque wrenches)

LK = adjusted functional length


LK = LF SF + S (or YS)

Normal situation
Torque wrench No 730N/10 combined with
square drive insert tool No 734/5 and socket size 13 mm.
Required tightening torque for the screw MA = 40 N m
Dimension table for torque wrenches:
Dimension table for square drive insert tools:

LF = 336 mm, SF = 17.5 mm


S = 17.5 mm

S = SF
W = MA

No adjustment to setting value required


on torque wrench.

Example 1: adjusted setting value (1 insert tool)


Torque wrench No 730N/20 combined with
ring insert tool No 732/40 size 36 mm
Required tightening torque for the screw MA = 190 N m
Dimension table for torque wrenches:
Dimension table for ring insert tools:

LF = 424.5 mm, SF = 25 mm
S = 28 mm

And this is what it looks like in the catalogue:


732/40

Basic wrenches with tool carrier for insert tools

730N

Ring insert tools

P
b

h
S

'

mm

mm

b
mm

h
mm

S
mm

58 22 40 13
58 22 40 14
58 22 40 15
58 22 40 16

13
14
15
16

22.5
23
24
25.5

11
11
11
12

25
25
25
25

130
123
128
133

32.90
32.90
33.60
32.90

58 22 40 17
58 22 40 18
58 22 40 19
58 22 40 21

17
18
19
21

27
29
30.5
33

12
13
13
15

25
25
25
25

135
134
138
144

32.90
32.90
32.90
39.20

58 22 40 22
58 22 40 24
58 22 40 27
58 22 40 28

22
24
27
28

34.5
37.5
42.5
45.5

15
15
17
19

25
25
25
25

145
153
162
175

39.20
39.20
39.20
47.80

58 22 40 30
58 22 40 32
58 22 40 34
58 22 40 36

30
32
34
36

46
47.5
52
54

19
19
19
19

25
25
28*
28*

182
181
210
203

44.30
44.30
47.80
45.40

58 22 40 41

41

,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,
,

60

20

30*

240

45.40

Code

'

'

Fine scale
Code

size

2
5
10
12

220 N m
1050 N m
20100 N m
25130 N m

20180 in.lb
737 ft.lb
1575 ft.lb
2095 ft.lb

1Nm
5Nm
10 N m
10 N m

10 in.lb
1 ft.lb
2.5 ft.lb
2.5 ft.lb

0.2 N m
0.25 N m
0.5 N m
0.5 N m

40200 N m
80400 N m
130650 N m
130650 N m

30150 ft.lb
60300 ft.lb
100480 ft.lb
100480 ft.lb

10 N m
20 N m
50 N m
50 N m

5 ft.lb
10 ft.lb
20 ft.lb
20 ft.lb

1Nm
2Nm
2.5 N m
2.5 N m

120600 ft.lb 100 N m


150750 ft.lb 100 N m
1.515 ft.lb 10 in.lb
737 ft.lb 50 in.lb

25 ft.lb
25 ft.lb
0.5 ft.lb
1 ft.lb

5Nm
5Nm
2 in.lb
2.5 in.lb

180900 in.lb
1575 ft.lb 100 in.lb
3501800 in.lb
30150 ft.lb 100 in.lb
60300 ft.lb 8003600 in.lb 20 ft.lb

2.5 ft.lb
5 ft.lb
100 in.lb

5 in.lb
10 in.lb
2 ft.lb

'

50 18 10 02
50 18 10 05
50 18 10 10
50 18 10 12

50 18 10 20
20
50 18 10 40
40
50 18 10 65
65*
50 18 13 65 II/65 U

50 18 10 80
50 18 11 00
50 58 10 02
50 58 10 05

80 U 160800 N m
100 U 2001000 N m
a/2
20180 in.lb
a/5
90450 in.lb

50 58 10 10 a/10
50 58 10 20 a/20
50 58 10 40 a/40
'

b
mm

h
mm

L
mm

LF
mm

SF
mm

;
;
;
,
,
,
,
.
.
.
;
;
;
,
,

28
28
28
28

23
23
23
23

275
330
386
421

226
280.5
336
379

17.5 737
17.5 831
17.5 988
25
1128

235.00
251.00
270.00
284.00

28
28
30.6
30.6

23
23
25.6
25.6

467
607
890
911

424.5
564.5
848
900

25
25
25
55

308.00
457.00
670,00
674.00

30.6
30.6
28
28

25.6 1178 1167


25.6 1363 1297
23
275 226
23
330 280.5

28
28
28

23
23
23

mm

386
467
607

R
g

1264
1655
3231
3504

55
4882 823.00
55
5300 1080.00
17.5 737 257.00
17.5 831 255.00

336
17.5 988
424.5 25
1264
564.5 25
1655

277.00
308.00
448.00

'

* Caution! Modified settings on torque wrench


(refer to note on page 207).

* recommended ratchet insert tool No 735/40HD


'

'

LF

WK =

MA LF
LF - SF + S

190 N m 424.5 mm
424.5 mm 25 mm + 28 mm

190 N m 424.5 mm
427.5 mm

SF

= 188.7 N m

S
Adjusted setting value WK = 188.7 N m
value to set 189 N m

S & SF
W & MA

Adjusted setting value WK = 21.7 N m

YS & SF
W & MA

Example 2: adjusted reading (insert tool and adapter)


Torque wrench No 71/2 combined with
square drive insert tool No 734/5 and adapter No 447 size 10 mm
Required tightening torque for the screw MA = 25 N m
Dimension table for torque wrenches:
LF = 336 mm, SF = 17.5 mm
Dimension table for square drive insert tools: S = 17.5 mm
Dimension table for adapters:
S = 50.8 mm

WK =

MA LF
LF - SF + S

25 N m 336 mm
336 mm 17.5 mm + 17.5 mm + 50.8 mm

25 N m 336 mm
386.8 mm

207

Torque tools, Torque testers

Audited. Documented. Certified.


STAHLWILLE DAkkS calibration laboratory

You can ensure controlled tightening, record the results of tightening processes, monitor
torque tools.
STAHLWILLE's DAkkS calibration laboratory for torque is accredited by the German
Accreditation Body in accordance with DIN EN ISO/IEC 17025: 2005. Which means the specific
requirements listed in Technical Specification ISO/TS 16949 relating to testing laboratories
are met. Absolutely essential: This is absolutely essential to all suppliers in the automotive
sector!
The transfer torque wrenches and torque transducers in use at STAHLWILLE's DAkkS calibration
laboratory are subject to regular examination by the German Federal Physics Institute (PTB)
in Braunschweig. The accuracy of the torque wrenches must be proved in a series of steps
and these must be traceable. Only in this way can the reliability of the readings be
guaranteed. During the first stage, the end-user checks the accuracy of the torque tools
in-house using suitable calibrated testing equipment. At the next stage, this test equipment is
checked in STAHLWILLE's DAkkS calibrating laboratory. This accreditation by the German
Accreditation Body (DAkkS) in accordance with DIN EN ISO/IEC 17025: 2005 guarantees
the direct link between the measuring equipment and the national standard as laid down

in DIN EN ISO 9001: 2008.

PTB
DAkkS
STAHLWILLE
Works calibration
STAHLWILLE
Internal works calibration
Customer
Enduser
Customer
Relationship between the national standard
and the equipment

208

Complete calibration systems


perfectControl
with matched components

Motorised calibrating tool


No 7794-2

+
Transducer laboratory

USB adaptor No 7757-1

PC/Printer not included


in the delivery

Manual calibrating unit


No 7794-1

Calibration systems No 7794-2/400

7794-2/1000

7794-1/400

7794-1/1000

Code

96 52 10 78

96 52 10 79

96 52 10 76

96 52 10 77

Weight/kg

61.9

69.6

53

60.7

Range/N m

1400

11000

1400

11000

on request

on request

on request

on request

Motorised

No 7794-2

No 7794-2

No 7794-1

No 7794-1

Extension unit

No 7791-1

No 7791-1

Transducer laboratory

No 7728-1 (110 N m)

No 7728-1 (110 N m)

No 7728-1 (110 N m)

No 7728-1 (110 N m)

No 7728-6 (660 N m)

No 7728-6 (660 N m)

No 7728-6 (660 N m)

No 7728-6 (660 N m)

No 7728-40 (40400 N m)

No 7728-40 (40400 N m)

No 7728-40 (40400 N m)

calibrating unit
Manual
calibrating unit

No 7728-100 (1001000 N m)
USB Adaptor

No 7757-1

No 7757-1

No 7757-1

No 7757-1

Jack cable

No 7751

No. 7751

No 7751

No 7751

Cable for No 7728

No 7751-1

No 7751-1

No 7751-1

No 7751-1

Square drive adaptor

No 409M (1/4" a x 3/8" D )

No 409M (1/4" a x 3/8" D )

No 409M (1/4" a x 3/8" D )

No 409M (1/4" a x 3/8" D )

No 7787 (1/4" a x 3/4" D )

No 7787 (1/4" a x 3/4" D )

No 7787 (1/4" a x 3/4" D )

No 7787 (1/4" a x 3/4" D )

No 7788 (3/8" a x 3/4" D )

No 7788 (3/8" a x 3/4" D )

No 7788 (3/8" a x 3/4" D )

No 7788 (3/8" a x 3/4" D )

No 7789 (1/2" a x 3/4" D )

No 7789 (1/2" a x 3/4" D )

No 7789 (1/2" a x 3/4" D )

No 7789 (1/2" a x 3/4" D )

No 7789-4 (1/4" a x 1/2" D ) No 7789-4 (1/4" a x 1/2" D )

No 7789-4 (1/4" a x 1/2" D ) No 7789-4 (1/4" a x 1/2" D )

No 7789-5 (3/8" a x 1/2" D ) No 7789-5 (3/8" a x 1/2" D )

No 7789-5 (3/8" a x 1/2" D ) No 7789-5 (3/8" a x 1/2" D )

Calibrating square drive No 734K/4 (1/4" D )

No 734K/4 (1/4" D )

No 734K/4 (1/4" D )

No 734K/4 (1/4" D )

No 734K/5 (3/8" D )

No 734K/5 (3/8" D )

No 734K/5 (3/8" D )

No 734K/5 (3/8" D )

No 734K/20 (1/2" D )

No 734K/20 (1/2" D )

No 734K/20 (1/2" D )

No 734K/20 (1/2" D )

No 734K/40 (3/4" D )

No 734K/40 (3/4" D )

No 734K/40 (3/4" D )

No 734K/40 (3/4" D )

Calibration software

TORKMASTER 4

TORKMASTER 4

TORKMASTER 4

TORKMASTER 4

DAkkS

insert tools

TORKMASTER

No 7728-40 (40400 N m)
No 7728-100 (1001000 N m)

calibration certificate

209

Torque testers

7794-2

Motorised calibrating and adjusting tool from 1 to 400 N m

The electronic perfectControl calibrating unit with its electric drive considerably reduces the amount of effort and time required for
calibration and adjustment tasks on torque wrenches.
1 measurement possible without moving the point of application of force.
1 prevents faulty readings thanks to precision-mounted spindle and finely regulated motor.
1 extremely accurate calibration thanks to optimised bearings and square drives for the transducers.
1 rapid, easy change of transducers thanks to quick-release latching system.
1 convenient pushbutton controls for clockwise and anticlockwise measurements with automatic speed compensation.
1 saves time because the bridge support is locked in place using a single-handed eccentric lever.
1 transmission of readings to a PC via USB interface for further processing, analysis and archiving.
1 calibration certificates can be printed or saved as a PDF file after calibration.
1 as found / as left calibrations can be documented.
1 during calibration, DIN EN ISO 6789:2003 in numerous languages is supported. Additional standards and works standards are available on request.
1 can be upgraded to perfectControl calibrating unit No 7794-3 for angle-controlled wrenches.
1 calibration up to 1000 N m is possible using the easily attached extension unit No 7791-1 (see p. 214)
1 design patent, other patents applied for
Both clicking and indicating torque wrenches can be calibrated. Calibration of transducers is possible using reference torque wrenches No 7770-100 and
7770-1000, available on request. 4 calibrating square drive insert tools No 734K (sizes 4, 5, 20, 40), 6 square drive adaptors (No 409M, No 7787,
No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor No 7757-1, software Torkmaster, 1 jack cable No 7751, 1 cable No 7751-1 with jack plug
and self-locking precision plug, 1 low-temperature cable connector, 1 hexagon key wrench No 10760CV size 2 mm are included. The unit is supplied
without the torque wrench, transducers or notebook.
Transducers laboratory No 7728 (see p. 211).

'

Code
'

96 52 10 93
'

7794-1

Capacity
Nm

for transducer
No

1400

7728 (sizes 1-100)

for torque wrenches with Profile width b


h
functional length (LF) max. mm
mm
mm mm
815

180

L
R
mm kg

640 328 1060 57

Price on request

Manual calibrating unit from 1 to 400 N m

As for perfectControl No 7794-2, but the drive is via an ergonomically designed handwheel.
Can be upgraded to perfectControl calibrating unit No 7794-2 with an electric drive.
Calibration up to 1000 N m is possible using the easily attached extension unit No 7791-1 (see p. 214). Patents applied for. 4 calibrating square drive
insert tools No 734K (sizes 4, 5, 20, 40), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4, No 7789-5), 1 USB adaptor
No 7751, software Torkmaster, 1 jack cable No 7751, 1 cable No 7751-1 with jack plug and self-locking precision plug, 1 low-temperature cable
connector, hexagon key wrench No 10760CV size 2 mm are included. Supplied without torque wrench, transducer or notebook.
Transducers laboratory No 7728 (see p. 211).

'

Code
'

96 52 10 92
'

210

Capacity
Nm

for transducer
No

for torque wrenches with


functional length (LF) max. mm

1400

7728 (sizes 1-100)

815

Profile width b
mm
mm
180

705

h
mm

L
mm

355

1060

47

kg

Price on request

7794-3

Automated calibrating and adjusting unit from 1 to 400 N m

Fully automatically calibrates electronic torque and angle-controlled wrenches made by STAHLWILLE
Design patent, other patents applied for. Model is the same as perfectControl No 7794-2, except it is additionally suited to calibrating angle-controlled
wrenches. Optimum adaptation to working height with motorised height adjustment.
4 calibrating square drive insert tools No 734K (sizes 4, 5, 20, 40), 6 square drive adaptors (No 409M, No 7787, No 7788, No 7789, No 7789-4,
No 7789-5), 1 USB adaptor No 7751, software Torkmaster, 1 jack cable No 7751, 1 cable No 7751-1 with jack plug and self-locking precision plug,
1 low-temperature cable connector, hexagon key wrench No 10760CV size 2 mm are included.
Supplied without torque wrench, transducer or notebook.

5
'

Code
'

Capacity
Nm

for transducer
No

1400

7728 (sizes 1-100)

96 52 10 94
'

7728

for torque wrenches with


Profile width b
functional length (LF) max. mm
mm
mm
815

180

640

h
mm

L
mm

kg

884-1134 1060

230

Price on request

Transducers laboratory

patented, for laboratory environments, with optimised measuring range, for calibrating torque wrenches and torque
screwdrivers, for use together with perfectControl calibrating unit No 7794 or calibration system No 7706. High degree
of accuracy thanks to conversion and digitization of readings within the transducer itself. With high-grade self-locking
precision plug. Not susceptible to lateral forces due to low-profile construction.
With DAkkS calibration certificate. Max. display deviation value 0.5% of the reading. Further details on request.
Supplied in sturdy plastic case.

Measuring ranges by deviation of indication


'

Code

size

Display deviation value


0.5% of the reading
Nm
ft.lb
in.lb

96 52 40 11
96 52 40 01
96 52 40 02
96 52 40 04

1S 1)2)
1 2)
2 2)
4 2)

110
110
220
440

'

96 52 40 06
96 52 40 10
96 52 40 20
96 52 40 40
1

6 2)
10 2)
20 2)
40

96 52 40 65 65
96 52 40 80 80
96 52 41 00 100
96 52 43 00 300
'

660
10100
20200
40400
65650
80800
1001000
3003000

0.747.4
0.747.4
1.515
330
4.545
774
15148
30295

Display deviation value


0.25% of the reading
Nm
ft.lb
in.lb

mm

R
g

Rg
with box

8.988.5
8.988.5
18177
35354

210
210
420
840

1888.5
1888.5
35177
71354

120
120
120
120

1/4
1/4
1/4
3/8

1735
1735
1735
2486

2415
2415
2415
3136

2146.90
2146.90
2146.90
2298.90

53531
89885
1771770
3543540

1260
20100
40200
80400

945
1474
30148
60295

106531
177885
3541770
7083540

120
120
120
156

3/8
3/8
1/2
3/4

2486
2486
2983
4846

3136
3136
3170
5507

2298.90
2298.90
2298.90
2298.90

130650
160800
2001000
6003000

96479
118590
148738
4432214

11515753
14167081
17708851
531026553

3/4
156
4846
3/4
156
4846
3/4
156
4846
195 1 1/2 10500

5507
5507
5507
12000

2298.90
2298.90
2298.90
3661.00

48479
5755753
59590
7087081
74738
8858851
2212214 265526553

1.57.4
1.57.4
315
630

"

) for calibrating torque screwdrivers


) available from June 2014

1
2
'

211

Torque tools, Torque testers

Audited. Documented. Certified.


STAHLWILLE calibration

Calibration Calibration is the regular examination of the accuracy and reliability of torque
tools. This is done using special-purpose calibrating equipment which is subject to stringent
monitoring. This is essential because torque tools are precision instruments which are very
often in use in safety-relevant environments. They are expected to provide the same level of
accuracy in their readings reliably over long periods of time. In order to ensure these standards
are guaranteed, it is essential that examination by means of calibration takes place at regular
intervals and is documented.

At the very least, a calibration system must include the following components:

Mechanical loader The mechanical loader is required for rapid, accurate fixing
and operation of the torque wrench. The mechanical loader also ensures that the
DIN EN ISO 6789 requirement for clicking torque wrenches is fulfilled, i.e. that, above
80% of the final torque value, the force is applied slowly and steadily within a period
of 0.5 to 4 seconds.

Transducer The torque applied using the torque wrench is digitalised within
the transducer and transmitted via USB cable to the PC, which ensures error-free
transmission.

USB-Adaptor From here, the data are transferred to the PC.

Cable for connecting laboratory transducers No 7728 to USB adaptor, with jack

plug and self-locking precision plug.

Square drive adaptor The set includes the square drive adapters necessary
to make full use of the measuring range of the transducers; e.g. for transducer
No 7723-3 (internal square drive 3/4), square drive adapter No 7787
(1/4 female to 3/4 male), No 7788 (3/8 female to 3/4 male) and No 7789
(1/2 female to 3/4 male).

TORKMASTER

212

Software The data received in this way can then be used to issue a calibration
certificate in accordance with DIN/ISO 6789.

Complete calibration systems


with matched components

Cable
No 7751-1
Transducer laboratory

Mechanical base unit

USB adaptor
USB adaptor No 7757-1

PC/Printer not included


in the delivery

Calibration systems No 7706-8 PC

7706-9 PC

7706-10 PC

7706-11 PC

Code

96 52 10 68

96 52 10 69

96 52 10 70

96 52 10 74

Weight/kg

14.2

67.6

70.6

108.4

Range/N m

110

2100

21000

203000

3531.80

8397.70

12178.50

13961.30

Mechanical

No 7791

No 7791

No 7792

No 7790

Extension unit

No 7791-1

No 7792-1

Transducer laboratory

No 7728-1S (110 N m)

No 7728-2 (220 N m)

No 7728-2 (220 N m)

No 7728-20 (20200 N m)

No 7728-10 (10100 N m)

No 7728-10 (10100 N m)

No 7728-100 (1001000 N m)

No 7728-40 (40400 N m)

No 7728-300 (3003000 N m)

loader
Stand alone test
attachment for
torque screwdrivers

No 7728-100 (1001000 Nm)


USB adaptor

No 7757-1

No 7757-1

No 7757-1

No 7757-1

Cable for No 7728

No 7751-1

No 7751-1

No 7751-1

No 7751-1

No 431 (3/8" a x 1/4" D )

No 7787 (1/4" a x 3/4" D )

No 7787 (1/4" a x 3/4" D )

No 409M (1/4" a x 3/8" D )

No 7788 (3/8" a x 3/4" D )

No 7788 (3/8" a x 3/4" D )

No 7789 (1/2" a x 3/4" D )

No 7789 (1/2" a x 3/4" D )

No 409M (1/4" a x 3/8" D )

No 7789-2 (3/4" a x 1" D )

(connection between
transducer and USBadaptor)
Square drive adaptor

No 431 (3/8" a x 1/4" D )

No 7789-3 (1" a x 1" D )


No 7789-4 (1/4" a x 1/2" D )
No 7789-5 (3/8" a x 1/2" D )
Calibrating square drive

No 734K/4 (1/4" D )

No 734K/4 (1/4" D )

No 734K/4 (1/4" D )

insert tools

No 734K/5 (3/8" D )

No 734K/5 (3/8" D )

No 734K/5 (3/8" D )

No 734K/20 (1/2" D )

No 734K/20 (1/2" D )

No 734K/40 (3/4" D )

No 734K/40 (3/4" D )

Adaptors

No 3115 (1/4" D x 1/4" E E 6,3)


No 3115/1 (1/4" D x 1/4" E C 6,3)

TORKMASTER

Calibration software

TORKMASTER 4

TORKMASTER 4

TORKMASTER 4

TORKMASTER 4

DAkkS calibration

certificate

213

Torque testers

Mechanical loaders for torque wrenches and torque screwdrivers


Thanks to the modular design, end users can put together their own mechanical loader according to
their specific requirements. Extensions with additional components are possible any time. All the
components are carefully matched to ensure compatibility and can be easily fitted. This slot-in system is
easy to use and has a very accurate fit. The components can be quickly and easily locked together using
the integrated screw joints. The display unit can be attached at various points of the system via a
holder. In this way, every user can organise his or her work to suit themselves.
7791

Mechanical base unit from 1 to 400 N m

Measurement possible without moving the point of application of force.


Thanks to a specially designed force transmission system, mechanical loader No 7791 avoids the risk of the point of force application shifting during the
calibration process. The lever below the test rail is actuated in a linear direction by the handwheel acting on a spindle. The linear motion is translated
into a rotary movement which acts on the transducer. The torque wrench to be calibrated remains in the same position throughout the calibration
process.
This prevents measuring errors caused by the point of force application being moved. Thanks to a low-friction linear ball bearing, the torque wrench is
automatically levelled as it is placed in the unit. A further linear ball bearing ensures the contact with the torque wrench is friction-free. The reduction in
lateral forces acting on the transducer and in the friction on the point of contact with the torque wrench results in a corresponding reduction in
mismeasurement.
Patents applied for.
Supplied without torque wrench, transducer, display unit and holder.

5
7791-2
7791

'

Code
'

52 11 00 91
'

7791-1

Capacity
Nm

for transducer
No

1400

7728 (sizes 1-100)

for torque wrenches with


Profile width b
functional length (LF) max. mm
mm
mm
815

180

704

h
mm

L
mm

323 1069

R
kg

26.5 2682.00

Extension unit for No 7791, 7794-1 and 7794-2 up to 1000 N m

with one pair of adapter plates No 7770-3 for height compensation between extension unit No 7791-1 and perfectControl calibrating units No 7794-1
and No 7794-2.

7791-2
7791
7791-1

'

Code
'

52 11 01 91
'

214

Capacity
Nm
1000

for torque wrenches with


Profile width b
functional length (LF) max. mm
mm
mm
1390 (7791 + 7791-1)

180

308

h
mm

L
mm

135

673

5.4

kg

436.00

7792

Mechanical base unit from 20 to 1000 N m

Patents applied for.

7790

7792

'

Code

Capacity
Nm

for transducer
No

52 11 00 92

201000

7728 (sizes 20; 100; 300)

'

'

7792-1

for torque wrenches with


functional length (LF) max. mm

Profile width
mm

b
mm

h
mm

L
mm

270

722

323

1668.5

57

1390

kg

4480.00

Extension unit for No 7792 up to 3000 N m


7790

7792
7792-1
'

Code
'

52 11 01 92
'

Capacity
Nm

for torque wrenches with


functional length (LF) max. mm

Profile width
mm

b
mm

h
mm

L
mm

3000

2390 (7792 + 7792-1)

270

558

135

1073

23.9

Test attachments for torque


screwdrivers
7790

7791-2

Stand alone test attachment


for torque screwdrivers

Can be bolted to mechanical loader No 7792.


The torque screwdriver to be calibrated is inserted
in the square mount of the transducer and fixed
using the universal central clamp. The handwheel
ensures that the required force is applied in a
controlled manner to the torque screwdriver.
Supplied without transducer or torque
screwdriver.

kg

880.00

Test attachment for torque


screwdrivers

Can be bolted onto mechanical loader No 7791.


The torque screwdriver to be calibrated is inserted
in the square mount of the transducer and fixed
using the universal central clamp. The handwheel
ensures that the required force is applied in a
controlled manner to the torque screwdriver.

'

Code
'

Capacity
Nm

b
mm

h
mm

t
mm

10

250

442593

351

3.9

52 11 02 91
'

kg

1175.00

'

Code
'

58 52 10 90
'

Capacity for transducer


Nm
No
10

7728-1S

b
mm

h
mm

t
R
mm kg

Accessory

250 442593 351 7.9 1257.00

7750-1

Holder

for display unit No 7750.


Can be bolted to mechanical loaders
and test attachments.

'

Code
'

52 10 10 50
'

R
g

165

45.80
215

Torque testers

Electronic torque tester for torque wrenches Sensotork 7707 W


(For complete calibration systems, see p. 209, 213)
Compact workshop-based torque tester for easy adaptation by replacement of the transducers.
High degree of accuracy thanks to flat transducer and conversion and digitalisation of readings within
the transducer (see p. 217).
High degree of safety through display showing actual torque read-off where clicking torque wrenches
are used.
7707 W

Workshop torque tester Sensotork

Electronic workshop torque tester for torque wrenches, consisting of:


1 transducer, patent
1 holder
1 display unit (registered design)
1 tripod for display unit (with 1.5 m cable)
1 spiral cable
1 mains adaptor (110 V230 V with interchangeable socket adaptors) or direct connection to 12 V in-car supply is possible
1 square drive adaptor (No 7707-2W, No 7707-2-1W, No 7707-2-2W, No 7707-3W)
1 kit for attaching the unit to a workbench or wall in a horizontal or vertical testing position
for clockwise and anticlockwise use. Units of measurement: N m, ft.lb, in.lb. The easily interchangeable transducers are attached to the holder by means
of a QuickRelease safety lock. Low lateral forces thanks to low-profile transducers, automatic detection of the transducer, flexible and user friendly
because the unit can be used horizontally or vertically and the display unit can be placed in many positions, additional tripod with 1.5 m cable for
mounting the display unit to facilitate visual monitoring when using longer torque wrenches, especially broad measuring range from approx. 2% to 100%
of rated value. The software No 7759-4, including USB hub and jack cable (see p. 218), enables readings to be transferred to the PC for documenting and
for generating calibration certificates in accordance with DIN EN 6789:2003 (no separate power supply needed, power comes from PC). While individual
transducers are being recalibrated, the torque tester itself remains on-site for further use. Wide range of application
(-20C to +60C). Complies with DIN 51309: 2005, Class 2 and DKD-R 3-8: 2003. With certificate. Supplied in sturdy plastic case.

QuickRelease
Rapid change and firm locking
of the transducers thanks to the
QuickRelease safety lock.

Interchangeable
square drive adapters:
A set of interchangeable
square drive adapters are
conveniently stored in the
mounting block for a range
of different drive sizes.

'

Code

No

Capacity
Nm

Capacity
ft.lb

96 52 10 80
96 52 10 72
96 52 10 83
96 52 10 84

7707-1W
7707-2W 1)
7707-2-1W 2)
7707-2-2W 3)

0.420
2100
4200
8400

0.315
1.574
3148
6295

96 52 10 82

7707-3W 3)

251100

18812

'

'

a
"

b
mm

h1
mm

h2
mm

t
mm

3.5177
18885
351770
713540

1/4
3/8
1/2
3/4

180
180
180
180

79
79
79
79

215
215
215
215

180
180
180
180

6255
7025
7511
7654

9500
10300
10975
11100

3339.00
3355.00
3412.00
3412.00

2219736

3/4

180

79

215

180

7495

11000

3412.00

Capacity
in.lb

) with square drive adaptor No 409M (1/4" a x 3/8" D)


2
) with square drive adaptors No 7789-4 (1/4" a x 1/2" D), No 7789-5 (3/8" a x 1/2" D)
3
) with square drive adaptors No 7787 (1/4" a x 3/4" D), No 7788 (3/8" a x 3/4" D), No 7789 (1/2" a x 3/4" D)
1

'

216

Rg
with box

Which transducer is for which torque wrench?


(Calibration in accordance with DIN EN ISO 6789: 2003)
STAHLWILLEs recommendation:
+++ very well suited

No

++ well suited

7721-1 7722

730D/10

+ suitable

7723-1 7723-2 7723-3


+++

730D/20

+++

730D/40

+++

730D/65
730N/2

+++

730N/5

+++

730N/10

+++

++

730N/12

+++

730N/20

+++

730a/10

+++

+++
+++
+++

++
+++

730Na/20
730Na/40

++

+++

++

730a/20

+++

++

720Nf/80

+++

+++

755/10

+++

++
++

+++

++

755/30

+++

++

71/40

+++

730a/4

+++

++

730/5

+++

++

730/10

+++

++

712R/20

730/12

+++

+++

712R/40

730/20

+++

++

77217724

+++

755/4

++

++

71/80

+++

71aR/80

+++

73Nm/15

+++

713R/6

++

713R/20

+++

713R/40

++
+++

712R/6

+++

+
++
+

+++

++
+++

+++

730/40

+++

+++

755/20

730/65

++

721Nf/100

++

+++

+++

721Nf/80

++

730a/2

+
+++

++

730/80

+++

730/2
730/4

++

730a/12

755R/1

730Na/10

7723-1 7723-2 7723-3 7724-1

721/30
+++

+++

+++

721/15
++

730N/65
730Na/5

7721-1 7722

730a/5

721/5

+++

730N/40
730Na/2

No

+++

+++
+++
+++

+++
+++

Transducers

Patent, for calibration of torque wrenches and torque screwdrivers, high degree of accuracy thanks to conversion and
digitization of readings within the transducer itself. Not susceptible to lateral forces due to low-profile construction.
Can also be used as part of a calibration system (see p. 209, 213). With certificate. Supplied in sturdy plastic case.

Measuring ranges by deviation of indication


'

Code

'

Display deviation value


1% of the reading
Nm
ft.lb
in.lb

No
7721 )
7721-0
7721-1
7722

96 52 10 23
96 52 20 23
96 52 10 28
96 52 10 29

7723-1
4200
3148
351770
20200 15148 1771770
40200 30148
7723-2
8400
6295
713540
40400 30295 3543540
80400 59295
7723-3
251100 18812 2219736 1101100 81812 9749736 2201100 162812
7724-1 2) 1503000 1112214 132826553 3003000 2212214 265526553 6003000 4432214

'

1.888.5
1.888.5
3.5177
18885

110 0.747.4
110 0.747.4
220
1.515
10100
774

8.988.5
8.988.5
18177
89885

Display deviation value


0.25% of the reading
Nm
ft.lb
in.lb

96 52 10 21
96 52 10 00
96 52 10 26
96 52 10 22

0.210 0.157.4
0.210 0.157.4
0.420
0.315
2100 1.574

Display deviation value


0.5% of the reading
Nm
ft.lb
in.lb

210
210
420
12100

1.57.4
1.57.4
315
974

17.788.5
17.788.5
35177
106885
3541770
7083540
19479736
531126553

mm
120
120
120
120

Rg
a R with
"

box

1/4
1/4
1/4
3/8

1735
1735
1735
2486

2411
2411
2411
3223

1534.90
1534.90
1534.90
1692.90

2983
3134
2998
10500

3605
3745
3761
12000

1692.90
1692.90
1692.90
3070.00

120 1/2
120 3/4
120 3/4
195 1 1/2

) for calibrating torque screwdrivers


) for use with mechanical loader No 7792 and 7792-1 (see p. 215)

1
2

Note!
Torque testers are measuring instruments! They have to be regularly calibrated and, where necessary, adjusted, using suitable
calibration equipment. We recommend recalibrating every 12 months.
'

217

Torque testers

Accessories for workshop torque tester and calibration systems


7750

Display unit

7751-1

Cable for No 7728

registered design, for displaying the actual


torque as measured. Units of measurement:
N m, ft.lb, in.lb. Modes of operation: track,
peak hold, first peak (only with manual
operation), additional display of actual
torque applied with clicking torque
wrenches. Swivels to any desired position
thanks to universal ball-joint.

for connecting laboratory transducers


No 7728 to a USB hub or display unit,
with jack plug, 90 angled, and selflocking precision plug.

'

Code

L
m

52 11 00 54

1.5

50

'

'

7752

55.50

Spiral cable

Connection between transducer and


display unit or USB adaptor, with
jacks at both ends, 90 angled.
'

Code

'

52 10 00 50

182

'

'

7759-4

751.00

USB adaptor, jack cable and software


Torkmaster

Link between perfectControl or transducer and PC. For adjusting and


calibrating torque wrenches and torque screwdrivers. Produces calibration
certificates in accordance with DIN EN ISO 6789: 2003, which can be
printed out or saved as PDF files.
1 as found / as left calibrations can be documented.
1 graphical representation of the torque progression
1 user management
1 17 languages
1 equipment testing system
System requirements:
1 PC
1 Microsoft Windows XP SP3 or later operating system
1 USB connection

Code
'

52 11 00 52
'

7760

L
max. mm

500

35

10.90

Mains adaptor

Input:
110 V230 V AC ,
Output: 9 V DC,
with interchangeable socket
adaptors.

'

Code
'

52 11 00 56
'

7761

Volt
110230

R
g

385

41.00

Interface adaptor

for fully automated calibration and adjustment


of No 714 angle-controlled torque wrenches
with perfectControl calibrating and adjusting
units No 7794-2 and 7794-3.
'

'

Code

L
m

96 58 36 29

1.5

137

'

'

Code

52 11 00 61
127.20

Jack cable

26

'

7761/3
7751

'

221.00

Interface adaptor set

Connection between transducers


No 7721-7724 and USB adaptor or
display unit, with jacks at both
ends, 90 angled.

Contents
No 7761 interface adaptor
No 7752 spiral cable
No 7760 mains adaptor

'

Code

L
m

52 11 00 51

1.5

50

'

'

'

8.70

Code
'

96 52 11 61
'

218

R
g

446

272.90

409M

Square drive adaptor

7789-3

1/4"

socket x 3/8" plug


(6.3 x 10 mm).

Square drive adaptor

1" socket x 1 1/2" plug


(25 x 40 mm).

'

Code

L
mm

mm

11 03 00 10

13

25

14

'

'

15.20
'

7787

Square drive adaptor

Code

L
mm

mm

58 52 40 89

44

60

291

'

1/4"

socket x 3/4" plug


(6.3 x 20 mm).

'

7789-4

94.50

Square drive adaptor

1/4"

socket x 1/2" plug


(6.3 x 12.5 mm).

'

Code

L
mm

mm

58 52 10 87

15.5

29

41

'

'

7788

24.40
'

Square drive adaptor

3/8"

socket x 3/4" plug


(10 x 20 mm).

Code

L
mm

mm

58 52 40 90

15.5

29

25

'

'

7789-5
3/8"

Code

mm

58 52 10 88

23.5

29

52

'

'

7789
1/2"

24.40

Square drive adaptor


1/2"

socket x
plug
(10 x 12.5 mm).

'

L
mm

24.40

Square drive adaptor

'

3/4"

socket x
plug
(12.5 x 20 mm).

Code

L
mm

mm

58 52 40 91

15.5

29

28

'

'

734K

24.40

Calibrating square drive insert tools

'

Code

L
mm

mm

58 52 10 89

23.5

29

42

'

'

Without a ball or pin (so not suitable for bolt tightening). Optimum
measuring results during calibration thanks to reduced lateral forces.

24.40
b

7789-2

Square drive adaptor

3/4"

socket x 1 1/2" plug


(20 x 40 mm).

'

"

mm

b
mm

h
mm

S
mm

58 24 30 04 4
58 24 30 05 5
58 24 30 20 20
58 24 30 40 40

1/4
3/8
1/2
3/4

14
14
18
25

17.5
17.5
25
25

76
80
218
410

27.40
27.40
30.60
50.50

58 24 11 00 100 U

3/4

;
;
,
,
.

20
20
27
40
43

25

55

895

170.00

Code

size

'

'

'

Code

L
mm

mm

58 52 30 89

44

60

383

'

'

70VK
94.50

Calibrating square drive units

Without a ball or pin (so not suitable for bolt tightening). Optimum
measuring results during calibration thanks to reduced lateral forces.

a
b

'

Code
'

size

for No

59 01 10 14 11
734/4
59 01 10 03
3
734/5
59 01 10 11 502 1/2
734/20
59 01 10 08
8
734/40, 734/100
'

a
"

b
"

L
mm

3/8
3/8
1/2
3/4

1/4
3/8
1/2
3/4

24.7
27.6
36.9
52.2

15
20
60
147

S
5
5
5
5

13.20
10.20
7.65
18.80

219

Allocation of coefficients of friction and recommended values to various materials,


surfaces and joint lubrication states

Approximate values for static friction T


in the joint

Class of
friction
coefficient
A

Material pairings

0.04 to 0.10

0.08 to 0.16

0.14 to 0.24

0.20 to 0.35

0.30

Dim.

M4

M5

M6

M7

Range for
G and K

M8

M 10

M 12

M 14

M 16

M 18

M 20

M 22

M 24

M 27

M 30

M 33

M 36

M 39

Strength
class
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9
8.8
10.9
12.9

Selection of typical examples for

Selection of typical examples for

Material/surfaces
bright metal, hardened and
temperated black, phosphated
electrocoatings like Zn, Zn/Fe, Zn/Ni,
zinc flake coatings
bright metal, hardened and
temperated black, phosphated
electrocoatings like Zn, Zn/Fe, Zn/Ni,
zinc flake coatings,
Al and Mg alloyscoatings
hot-dip zinc-plated
organic coatings

Lubricants
solid lubricants such as MoS2,
graphite, PTFE, PA, PE, PI in bonded
coatings, as topcoats or in pastes;
melted wax, wax dispersion
solid lubricants, such as MoS2,
graphite, PTFE, PA, PE, PI in bonded
coatings, as topcoats or in pastes;
melted wax; wax dispersions;
greases;oils;delivery state
MoS2; graphite;wax dispersions
with integrated solid lubricant
or wax dispersion
solid lubricants or waxes;pastes
wax dispersion pastes
delivery status (slightly oiled)
without

austenitic steel
austenitic steel
bright metal, phosphatised
electroplated coatings like Zn, Zn/Fe,
Zn/Ni, zinc flake coatings, adhesive
austenitic steel
electroplated coatings like Zn, Zn/Fe
electroplated coatings like Zn, Zn/Fe
Zn/Ni, austenitic steel, Al, and Mg alloys

Assembly pretension forces FM Tab in kN for G =


0.08
0.10
0.12
0.14
0.16
4.6
4.5
4.4
4.3
4.2
6.8
6.7
6.5
6.3
6.1
8.0
7.8
7.6
7.4
7.1
7.6
7.4
7.2
7.0
6.8
11.1
10.8
10.6
10.3
10.0
13.0
12.7
12.4
12.0
11.7
10.7
10.4
10.2
9.9
9.6
15.7
15.3
14.9
14.5
14.1
18.4
17.9
17.5
17.0
16.5
15.5
15.1
14.8
14.4
14.0
22.7
22.5
21.7
21.1
20.5
26.6
26.0
25.4
24.7
24.0
19.5
19.1
18.6
18.1
17.6
28.7
28.0
27.3
26.6
25.8
33.6
32.8
32.0
31.1
30.2
31.0
30.3
29.6
28.8
27.9
45.6
44.5
43.4
42.2
41.0
53.3
52.1
50.8
49.4
48.0
45.2
44.1
43.0
41.9
40.7
66.3
64.8
63.2
61.5
59.8
77.6
75.9
74.0
72.0
70.0
62.0
60.6
59.1
57.5
55.9
91.0
88.9
86.7
84.4
82.1
106.5
104.1
101.5
98.8
96.0
84.7
82.9
80.9
78.8
76.6
124.4
121.7
118.8
115.7
112.6
145.5
142.4
139.0
135.4
131.7
107
104
102
99
96
152
149
145
141
137
178
174
170
165
160
136
134
130
127
123
194
190
186
181
176
227
223
217
212
206
170
166
162
158
154
242
237
231
225
219
283
277
271
264
257
196
192
188
183
178
280
274
267
260
253
327
320
313
305
296
257
252
246
240
234
367
359
351
342
333
429
420
410
400
389
313
307
300
292
284
446
437
427
416
405
522
511
499
487
474
389
381
373
363
354
554
543
531
517
504
649
635
621
605
589
458
448
438
427
415
652
638
623
608
591
763
747
729
711
692
548
537
525
512
498
781
765
748
729
710
914
895
875
853
831

Assembly pretension forces and tightening torques


MAssembly pretension forces FM and tightening torques MA for screws with standard metric threads
to DIN13, Page 43 (M1.6M2.5M 3 to M39) and head contact sizes such as DIN 912 (DINEN ISO
4762), DIN 931 (DIN EN 24014), DIN 934 (DIN EN 24032), DIN 6912, DIN 7984, DIN77990.
The table readings FM and MA are based on the SI unit N(Newton). 1 N =0.102 kp, 1 Ncm = 0.102
kpcm, 1 Nm = 0.102 kpm, 1 kp =9.81 N, 1 kpcm =9.81 Ncm, 1 kpm = 9.81 Nm.
The assembly pretension forces FM listed in the table above result in 90% exploitation of a screws
yield strength d0.2 (DIN ISO 898 Part 1) through the comparative tension dred., which depends on the
coefficient of thread friction G. The table of assembly pretension forces shows what quality of which

220

steel soft cast iron

0.12 to 0.24

0.06 to 0.1

soft cast iron soft cast iron 0.15 to 0.3

0.2

bronze steel

0.12 to 0.28

0.18

soft cast iron bronze

0.28

0.15 to 0.2

steel copper alloy

0.07

steel aluminum alloy

0.1 to 0.28

aluminum aluminum

0.21

0.05 to 0.18

Assembly pretension forces FMTab and tightening torque MA at


n = 0.9 for setscrews with standard metric threads to DINISO262;
head sizes of hex screws to DINENISO4014 to 4018,
screws with outer hex to DIN34800 and cheese head to
DINENISO 4762 and central bore medium to DINEN20273.

oil
without
without

0.20
3.9
5.7
6.7
6.4
9.4
11.0
9.0
13.2
15.5
13.1
19.3
22.6
16.5
24.3
28.4
26.3
38.6
45.2
38.3
56.3
65.8
52.6
77.2
90.4
72.2
106.1
124.1
91
129
151
116
166
194
145
207
242
168
239
279
220
314
367
268
382
447
334
475
556
392
558
653
470
670
784

steel steel/cast steel

Coefficient of static friction


in this state
dry
lubricated
0.1 to 0.23
0.07 bis 0.12

0.24
3.7
5.4
6.3
6.0
8.8
10.3
8.4
12.4
14.5
12.3
18.1
21.2
15.5
22.7
26.6
24.7
36.2
42.4
35.9
52.8
61.8
49.3
72.5
84.8
67.8
99.6
116.6
85
121
142
109
156
182
137
194
228
157
224
262
207
295
345
252
359
420
314
447
523
368
524
614
443
630
738

0.08
2.3
3.3
3.9
4.4
6.5
7.6
7.7
11.3
13.2
12.6
18.5
21.6
18.5
27.2
31.8
36
53
62
63
92
108
100
146
171
153
224
262
220
314
367
308
438
513
417
595
696
529
754
882
772
1100
1287
1053
1500
1755
1415
2015
2358
1825
2600
3042
2348
3345
3914

Tightening
0.10
2.6
3.9
4.5
5.2
7.6
8.9
9.0
13.2
15.4
14.8
21.7
25.4
21.6
31.8
37.2
43
63
73
73
108
126
117
172
201
180
264
309
259
369
432
363
517
605
495
704
824
625
890
1041
915
1304
1526
1246
1775
2077
1679
2392
2799
2164
3082
3607
2791
3975
4652

torque MA in N m for K = G =
0.12
0.14
0.16
3.0
3.3
3.6
4.6
4.8
5.3
5.1
5.6
6.2
5.9
6.5
7.1
8.6
9.5
10.4
10.0
11.2
12.2
10.1
11.3
12.3
14.9
16.5
18.0
17.4
19.3
21.1
16.8
18.7
20.5
24.7
27.5
30.1
28.9
32.2
35.2
24.6
27.3
29.8
36.1
40.1
43.8
42.2
46.9
51.2
48
54
59
71
79
87
83
93
101
84
93
102
123
137
149
144
160
175
133
148
162
195
218
238
229
255
279
206
230
252
302
338
370
354
395
433
295
329
360
421
469
513
492
549
601
415
464
509
592
661
725
692
773
848
567
634
697
807
904
993
945
1057
1162
714
798
875
1017
1136
1246
1190
1329
1458
1050
1176
1292
1496
1674
1840
1750
1959
2153
1428
1597
1754
2033
2274
2498
2380
2662
2923
1928
2161
2377
2747
3078
3385
3214
3601
3961
2482
2778
3054
3535
3957
4349
4136
4631
5089
3208
3597
3958
4569
5123
5637
5346
5994
6596

0.20
4.1
6.0
7.0
8.1
11.9
14.0
14.1
20.7
24.2
23.6
34.7
40.6
34.3
50.3
58.9
68
100
116
117
172
201
187
274
321
291
428
501
415
592
692
588
838
980
808
1151
1347
1011
1440
1685
1498
2134
2497
2931
2893
3386
2759
3930
4598
3541
5043
5902
4598
6549
7664

0.24
4.5
6.6
7.8
9.0
13.2
15.5
15.6
22.9
26.8
26.2
38.5
45.1
38.0
55.8
65.3
75
110
129
130
191
223
207
304
356
325
477
558
462
657
769
655
933
1092
901
1284
1502
1126
1604
1877
1672
2381
2787
2265
3226
3775
3081
4388
5135
3951
5627
6585
5137
7317
8562

screw is required for a particular thread friction to generate a certain required assembly pretension
force FM. The tightening torque MA required to achieve 90% yield strength exploitation for a screw
whose dimensions and quality are given can be determined from the right-hand table having regard
to a specific underhead friction (K).
To determine the rated torque to be applied, deduct half the spread of the corresponding torque
wrench from the applicable tightening torque MA in the table. Calculation of the table entries and
notes on their application to VDI2230, Page 1.

Screwdrivers

Screwdrivers

Great freedom of choice


DRALL+ screwdrivers

A new challenge every day, a new tool every day to meet that challenge. The DRALL+ series
was developed for professionals faced with new challenges on a daily basis. Development
focussed on three crucial user requirements: durability and reliability, safety in use, pleasant
to handle. These requirements are met in full by DRALL+ screwdrivers in fact, they feel so
natural, you will hardly notice them.
The profiles
DRALL+ is available for the following screwhead
profiles:
r Slotted
k PH cross-head
l PZ cross-head
n TORX
o TORX Tamper Resistant with a central bore
i Hex with a ball-end
t TORQ-SET

4 handle sizes
The handle sizes for the DRALL+ screwdrivers
are designed specifically to match the drive
profiles.

The hand-stop helps stop injuries Flange-like design. Supports your hand in the direction

The multifunctional section The lower end of the handle is deliberately made extra-long.

The transmission zone The rounded cross-section in the central area combines maximum grip

The elastic handle components The soft rubber textured thermoplastic elastomer (TPE)

The firm handle components The green zones are made of high-grade, impact-safe

of the blade to prevent it slipping off the handle. Features integrated anti-roll shape.

This enables the thumb and index finger to wrap around more easily and spin the screwdriver.

and easy turning.

fits snugly in the hand. These sections are injection moulded around the hard core and
bonded to it inseparably.

polypropylene (PP). The tang is anchored in the core to allow force to be transferred through it.

Impact-resistant cap For use under extreme conditions, the DRALL+ is also available
with a one-piece shaft, an impact head and a metal impact cap.

VDE insulated screwdrivers: High-grade materials and durability testing guarantee


absolute safety when working on AC systems up to 1000 V (effective voltage)
or 1500 V DC.

222

The power is where you put it with the


3K DRALL screwdriver series

The efficiency with which you use a screwdriver in your daily work, and the safety
with which you work, depend to a large extent on the quality of the tool. It is not just
the use of high-grade materials but also the shape that matters in particular the shape
of the handles if you want to stay in control. STAHLWILLEs 3K DRALL screwdrivers
unite these positive qualities in a manner which is close to perfect. The result is a longlife,
ergonomically designed tool providing easy working combined with maximum force
transmission even with greasy hands.
3K DRALL screwdrivers are available in sets
conveniently positioned in plastic inlays
or TCS safety inlays, designed for use with
STAHLWILLE Tool Trolleys and Tool Boxes.

1
2

3K DRALL handles are made up of 3 components:

2nd component Soft, heat-bonded inlay made of easy-to-grip thermoplastic elastomer (TPE).

3rd component Two large surfaces coated with special fibres, resistant long-term to solvents

Additional Tommy-bar hole When things get really tough, the additional Tommy-bar hole

1st component Extremely resistant, impact-safe core made of black polypropylene (PP).

to improve force transmission and work safety.

will cope with a fair amount of torque.

Blades Made of high-grade Chrome Alloy Steel.

Tips Black, extremely tough, retain their shape.

Through-hardened. Anchored firmly in the haft

Whether you use the straight-bladed or

due to the extra-wide, forged tang.

Phillips type the crosshatched blade tips will

High resistance to bending.

accurately transmit maximum force to the screw


head.

223

Screwdrivers
DRALL+ set of screwdrivers

4691

4697

Set of 7 DRALL+
screwdrivers.
Content:
r 4620: size 1 (0.6 x 3.5 x 75 mm)
size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)
r 4628: size 1 (0.4 x 2.5 x 60 mm)
k 4630: size 1; size 2

DRALL+ set of screwdrivers

Set of 8 DRALL+
screwdrivers.
Content:
r 4620: size 1 (0.6 x 3.5 x 75 mm)
size 2 (0.8 x 4.0 x 100 mm)
r 4622: size 1 (1.0 x 5.5 x 100 mm)
size 2 (1.2 x 6.5 x 125 mm)
size 3 (1.2 x 8.0 x 150 mm)
k 4730: size 1
k 4732: size 2; size 3

'

Code
'

96 46 91 10
'

'

610

43.60

Code
'

96 46 97 10
'

930

73.55

4692

DRALL set of screwdrivers

4694

Set of 8 DRALL+
screwdrivers.
Content:
r 4620: size 1 (0.6 x 3.5 x 75 mm)
size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
k 4630: size 1; size 2; size 3

n DRALL+

set of TORX screwdrivers

Set of 9 DRALL+
screwdrivers for
TORX screws.
Content:
n 4650: T8, T9, T10, T15, T20, T25,
T27, T30, T40
'

'

Code
'

96 46 92 10
'

870

Code
'

62.65

96 46 94 10
'

4699

DRALL+ set of screwdrivers

4693

'

Code
96 46 99 10

'

'

950

Code
96 46 96 10
'

224

91.90

175 x 350 x 35 mm, 7 pieces


'

Code

'

96 83 82 78

490

'

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2; 3

'

'

DRALL+

Set of 6
screwdrivers
with an impact cap.
Content:
r 4622SK:
size 1 (0.8 x 4.0 x 90 mm)
size 2 (1.0 x 5.5 x 100 mm)
size 3 (1.2 x 6.5 x 125 mm)
size 4 (1.2 x 8.0 x 150 mm)
k 4632SK: size 1; size 2

740

TCS 4620/4630

81.30

DRALL+ set of screwdrivers

4696

76.10

Set of 9 DRALL+ screwdrivers for


TORX screws
(TORX TAMPER RESISTANT).
Content:
o 4656: T8, T9, T10, T15, T20, T25,
T27, T30, T40
(with hollow point)

'

96 46 93 10

+
o DRALL

'

'

set of TORX screwdrivers

Set of 9 DRALL+
screwdrivers.
Content:
r 4622: size 1 (1.0 x 5.5 x 100 mm)
size 2 (1.2 x 6.5 x 125 mm)
size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)
r 4628: size 1 (0.4 x 2.5 x 60 mm)
k 4632: size 1; size 2
r 4724: size 2 (1.0 x 5.5 x 25 mm)
k 4734: size 2

Code

730

R
g

870

'

73.85

'

70.25

TCS 4622/4632

TCS 4620/4660VDE

175 x 350 x 35 mm, 6 pieces


'

530 x 350 x 40 mm, 18 pieces

Code

'

'

96 83 87 83

845

'

No 4622

'

No 4632
'

95.65

Code

'

96 83 11 79

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 3 (1.2 x 8.0 x 150 mm)
size 4 (1.6 x 10.0 x 175 mm)

1689

'

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
size 6 (1.6 x 10.0 x 200 mm)
size 7 (2.0 x 12.0 x 200 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

sizes 2; 3

'

TCS 4620/4660VDE+10767

'

'

'

'

'

'

530 x 350 x 35 mm, 27 pieces


'

Code

'

'

96 83 11 68

2080

'

No 4620

No 4628

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
size 6 (1.6 x 10.0 x 200 mm)
size 7 (2.0 x 12.0 x 200 mm)
size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

'

'

'

'

'

220.80

TCS 4621/4734/16

530 x 350 x 40 mm, 16 pieces


'

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

96 83 20 98

1490

'

'

'

No 4621

size 0 (0.4 x 2.5 x 80 mm)


size 1 (0.5 x 3.5 x 90 mm)
size 2 (0.6 x 4.0 x 100 mm)
size 4 (1.0 x 6.5 x 140 mm)
size 5 (1.2 x 8.0 x 160 mm)

No 4631

size 1; 2

No 4632

size 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10506

0.8 x 4.0 x 300 mm

No 10518

1.0 x 5.5 x 410 mm

No 12600

500 g

No 12922E

O 6 mm

'

'

'

'

'

'

'

'

'

Code
'

'

193.40

233.90

225

Screwdrivers
TCS 4622/4650+10760+10766

r Screwdrivers for slotted screws DRALL+

4622

DIN ISO 2380-1, -2, DIN 5264,


ISO 2380-1, -2, with hexagon,
Chrome Alloy Steel,
chrome plated, black tips.
'

Code

'

96 83 11 96

1895

'

252.90

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 4 (1.6 x 10.0 x 175 mm)
size 5 (2.0 x 12.0 x 200 mm)

'

size 1
size 3

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

'

'

'

L1
mm

L2
mm

R
g

46 22 10 55
46 22 10 65
46 22 10 80
46 22 11 00

1
2
3
4

1.0
1.2
1.2
1.6

5.5
6.5
8.0
10.0

100
125
150
175

215
240
275
300

85
100
159
174

10
10
10
10

8.40
10.80
13.90
15.90

46 22 11 20
46 22 11 40

5
6

2.0
2.5

12.0
14.0

200
250

325
375

310
331

5
5

20.70
26.30

DIN ISO 2380-1, -2, DIN 5264,


ISO 2380-1, -2,
with impact cap and hexagonal
shank, Chrome Alloy Steel, chrome plated, black tips.
'

size

a
mm

b
mm

L1
mm

L2
mm

R
g

46 22 00 40
46 22 00 55
46 22 00 65
46 22 00 80

1
2
3
4

0.8
1.0
1.2
1.2

4.0
5.5
6.5
8.0

90
100
125
150

195
215
240
275

50
106
135
191

10
10
5
5

9.95
11.50
13.50
16.70

46 22 01 00
46 22 01 20
46 22 01 40

5
6
7

1.6
2.0
2.5

10.0
12.0
14.0

175
200
250

300
325
375

226
267
340

5
5
5

17.50
25.70
32.00

Code
'

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

'

'

r Screwdrivers for slotted screws DRALL+

4620

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, Chrome Alloy Steel,
chrome plated, black tips.

'

r Carburettor screwdrivers DRALL

4724

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2,


stubby, Chrome Alloy Steel,
chrome plated, black tips.

r Screwdrivers for slotted screws DRALL+

4622SK

No 4632
'

b
mm

'

No 4630
'

a
mm

'

'

No 4622

size

Code

530 x 350 x 40 mm, 36 pieces

L1
L2

'

'

Code
'

size

a
mm

b
mm

L1
mm

L2
mm

R
g

Code
47 24 10 45
47 24 10 60
47 24 10 80

'

46 20 10 35
46 20 10 40
46 20 10 55
46 20 10 65

1
2
3
4

0.6
0.8
1.0
1.2

3.5
4.0
5.5
6.5

75
100
125
150

160
185
240
265

37
40
79
100

10
10
10
10

4.70
5.55
7.35
8.60

46 20 10 80
46 20 11 00
46 20 11 20

5
6
7

1.6
1.6
2.0

8.0
10.0
12.0

175
200
250

300
325
375

136
163
215

10
5
5

12.10
14.70
16.90

'

r Screwdrivers for slotted screws DRALL+

4621

parallel blades, as per VSM


(Swiss Standard),
Chrome Alloy Steel,
chrome plated, black tips.

R
g

1
2
3

0.6
1.0
1.2

3.5
5.5
8.0

25
25
25

80
80
80

34
32
39

10
10
10

5.85
6.00
6.55

for
r Electricians screwdrivers
+

4628

slotted screws DRALL

DIN ISO 2380-1, -2, DIN 5264, ISO 2380-1, -2, Chrome Alloy Steel,
chrome plated, black tips.
a
L2

size

a
mm

b
mm

L1
mm

L2
mm

R
g

46 28 10 25
46 28 10 35
46 28 20 35
46 28 10 40

1
2
3
4

0.4
0.6
0.6
0.8

2.5
3.5
3.5
4.0

60
75
100
125

145
160
185
210

38
40
41
46

10
10
10
10

3.75
4.15
4.80
5.05

46 28 10 55
46 28 20 55

5
6

1.0
1.0

5.5
5.5

150
200

265
315

92
102

10
10

6.10
7.10

'

size

L1
mm

L2
mm

R
g

46 21 10 25
46 21 10 35
46 21 10 40
46 21 10 55

0
1
2
3

0.4
0.5
0.6
0.8

2.5
3.5
4.0
5.5

80
90
100
120

165
175
185
235

36
40
42
78

10
10
10
10

4.35
4.50
4.50
7.00

46 21 10 65
46 21 10 80
46 21 11 00

4
5
6

1.0
1.2
1.6

6.5
8.0
10.0

140
160
180

255
275
305

96
117
160

10
10
10

7.00
8.90
12.40

226

L2
mm

'

b
mm

'

L1
mm

L1

a
mm

b
mm

'

Code

a
mm

'

Code

'

size

'

k Cross-head

4630

t Screwdrivers DRALL+

4636

screwdrivers DRALL

TORQ-SET, hexagonal blade,


phosphatised.

Phillips-Recess,
DIN ISO 8764-1, -2, ISO 8764-1, -2,
Chrome Alloy Steel,
chrome plated, black tips.

'

No

L1
mm

L2
mm

outside
E"

R
g

46 36 00 02
46 36 00 04
46 36 00 06
46 36 00 08

2
4
6
8

100
100
100
100

215
215
215
215

1/4
1/4

92
93
92
93

5
5
5
5

16.70
16.70
16.70
16.70

46 36 00 10
46 36 00 16

10
1/4

100
150

215
265

1/4
5/16

93
138

5
5

16.70
25.20

Code
'

'

Code
'

46 30 10 00
46 30 10 01
46 30 10 02
46 30 10 03

PH
size

L1
mm

L2
mm

R
g

0
1
2
3

60
80
100
150

145
185
215
275

35
44
90
146

10
10
10
10

'

k Cross-head

4631

4.60
5.75
7.90
10.70

'

l Cross-head

4640

screwdrivers DRALL+

screwdrivers DRALL

1/4
1/4

POZIDRIV/SUPADRIV, DIN ISO 8764-1, -2, ISO 8764-1, -2,


Chrome Alloy Steel, chrome plated, black tips.

Phillips-Recess,
extra long,
DIN ISO 8764-1, -2, ISO 8764-1, -2,
Chrome Alloy Steel, chrome plated, black tips.

L1
L2

'

Code
'

46 31 10 01
46 31 10 02

PH
size

L1
mm

L2
mm

R
g

1
2

250
250

355
365

110
122

1
1

'

'

15.10
19.00

k Cross-head

4632

Code
'

46 40 10 00
46 40 10 01
46 40 10 02
46 40 10 03

R
g

0
1
2
3

60
80
100
150

145
185
215
275

35
44
89
145

10
10
10
5

6.25
7.60
9.55
13.70

l Cross-head

screwdrivers DRALL

POZIDRIV/SUPADRIV,
DIN ISO 8764-1, -2, ISO 8764-1, -2,
stubby, Chrome Alloy Steel,
chrome plated, black tips.

L1
L2
'

46 32 10 01
46 32 10 02
46 32 10 03
46 32 10 04

L2
mm

4744

with hexagon, Phillips-Recess, DIN ISO 8764-1, -2, ISO 8764-1, -2,
Chrome Alloy Steel, chrome plated, black tips.

Code

L1
mm

'

screwdrivers DRALL+

'

PZ
size

PH
size

L1
mm

L2
mm

R
g

1
2
3
4

80
100
150
200

185
215
275
325

45
100
170
237

10
10
5
5

'

'

6.55
9.65
14.80
21.70

Code
'

47 44 10 01
47 44 10 02

PZ
size

L1
mm

L2
mm

R
g

1
2

25
25

80
80

28
34

10
10

'

k Cross-head

4632SK

n TORX screwdrivers DRALL+

4650

screwdrivers DRALL+

7.20
7.95

for inside TORX screws,


Chrome Alloy Steel,
chrome plated, black tips.

with impact cap and hexagonal shank, Phillips-Recess,


DIN ISO 8764-1, -2, ISO 8764-1, -2,
Chrome Alloy Steel, chrome plated, black tips.

'

L1
L2

'

46 32 00 01
46 32 00 02
46 32 00 03

size

mm

L1
mm

L2
mm

R
g

46 50 10 05
46 50 10 06
46 50 10 07
46 50 10 08

T5
T6
T7
T8

1.4
1.6
2.0
2.3

60
60
60
60

145
145
145
145

30
35
35
35

5
5
5
5

6.00
6.00
6.00
7.30

46 50 10 09
46 50 10 10
46 50 10 15
46 50 10 20

T9
T10
T15
T20

2.5
2.7
3.3
3.8

60
80
80
100

145
165
165
205

35
40
38
46

5
5
5
5

7.30
7.35
7.60
7.90

46 50 10 25
46 50 10 27
46 50 10 30
46 50 10 40

T25
T27
T30
T40

4.4
5.0
5.5
6.6

100
115
115
115

205
230
230
240

50
90
90
131

5
5
5
5

8.40
9.45
9.70
11.10

46 50 10 45

T45

7.8

130

255

136

13.50

'

'

Code

Code
PH
size

L1
mm

L2
mm

R
g

1
2
3

85
100
150

190
215
275

58
130
194

10
10
5

'

9.90
12.30
16.70

k Cross-head

4734

screwdrivers DRALL

Phillips-Recess,
DIN ISO 8764-1, -2, ISO 8764-1, -2,
stubby, Chrome Alloy Steel,
chrome plated, black tips.

'

'

Code
'

47 34 10 01
47 34 10 02
'

PH
size

L1
mm

L2
mm

R
g

1
2

25
25

80
80

27
31

10
10

5.85
6.35
227

Screwdrivers

VDE-insulated screwdrivers

TCS 4650

IEC 60900 C T AC 1000 V


High quality materials and stringent tests
guarantee safe use on "live" lines up to 1000 V
or 1500 V DC.
Individually tested at 10 000 V.

175 x 350 x 35 mm, 8 pieces


'

Code

'

96 83 87 67

350

'

No 4650

88.90

sizes T8; T9; T10; T15; T20; T25; T27; T30

Set with 6 screwdrivers DRALL+


IEC 60900 C, safety insulated.
z AC 1000 V
Content:
r 4660 VDE:
size 1 (0.4 x 2.5 x 75 mm)
size 3 (0.6 x 3.5 x 100 mm)
size 5 (1.0 x 5.5 x 125 mm)
size 6 (1.2 x 6.5 x 150 mm)
k 4665 VDE: size 1, size 2

n TORX screwdrivers DRALL

4650L

for inside TORX screws,


extra long, Chrome Alloy Steel,
chrome plated, black tips.
'

Code

size

mm

L1
mm

L2
mm

R
g

46 50 11 15
46 50 11 20
46 50 11 25
46 50 11 30

T15
T20
T25
T30

3.3
3.8
4.4
5.5

250
250
250
250

335
355
355
365

52
64
66
122

5
5
5
5

'

'

Screwdriver set DRALL+

4695 VDE

'

9.95
10.10
11.00
11.70

'

Code
'

96 46 95 10

o TORX screwdrivers DRALL+

4656

'

with hollow point (TORX TAMPER RESISTANT),


Chrome Alloy Steel, chrome plated, black tips.

620

45.85

TCS 4660/4665

L1
L2
'

Code

size

mm

L1
mm

L2
mm

R
g

46 56 00 08
46 56 00 09
46 56 00 10
46 56 00 15

T8
T9
T10
T15

2.3
2.5
2.7
3.3

60
60
80
80

145
145
165
165

39
35
39
39

5
5
5
5

8.40
8.40
8.40
8.70

46 56 00 20
46 56 00 25
46 56 00 27
46 56 00 30

T20
T25
T27
T30

3.8
4.4
5.0
5.5

100
100
115
115

205
205
230
230

42
46
90
90

5
5
5
5

9.20
10.70
11.70
12.10

46 56 00 40
46 56 00 45

T40
T45

6.6
7.8

115
130

240
255

120
118

5
5

14.30
15.10

'

'

175 x 350 x 40 mm, 6 pieces


'

i Ball ended hexagon drivers DRALL

for use on hexagon socket head


screws, swivel angle up to 25 each
side, Chrome Alloy Steel,
chrome plated, black tips.

'

96 83 87 66

400

'

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)


size 3 (0.6 x 3.5 x 100 mm)
size 5 (1.0 x 5.5 x 125 mm)
size 6 (1.2 x 6.5 x 150 mm)

No 4665 VDE

size 1; 2

'

'

69.75

r Electricians screwdrivers DRALL+

4660 VDE

10507N KK

Code

IEC 60900 C, safety insulated, blade gunmetal finished,


Chrome Alloy Steel.
a

b
L1
L2
'

size

a
mm

b
mm

L1
mm

L2
mm

R
g

46 60 10 25
46 60 10 30
46 60 10 35
46 60 10 40

1
2
3
4

0.4
0.5
0.6
0.8

2.5
3.0
3.5
4.0

75
100
100
100

160
185
205
205

43
39
42
46

10
10
10
10

5.10
5.75
5.75
6.85

46 60 10 55
46 60 10 65
46 60 10 80

5
6
7

1.0
1.2
1.2

5.5
6.5
8.0

125
150
175

240
265
300

90
115
170

10
10
10

8.55
10.50
14.10

'

Code
'

73 10 10 03
73 10 10 05
'

mm

L1
mm

L2
mm

R
g

3
5

300
300

385
415

56
132

5
5

Code
'

11.80
13.60

'

228

k Cross-head

4665 VDE

4899

screwdrivers DRALL+

screwdrivers

Phillips-Recess, IEC 60900 C,


safety insulated, blade gunmetal
finished, Chrome Alloy Steel.

Set of 9 3K DRALL screwdrivers


for TORX screws
(TORX TAMPER RESISTANT)
Content:
o 4856: T8; T9; T10; T15; T20; T25;
T27; T30; T40
(with hollow point)

'

Code
'

46 65 10 00
46 65 10 01
46 65 10 02
46 65 10 03

PH
size

L1
mm

L2
mm

R
g

0
1
2
3

60
80
100
150

145
185
215
275

35
47
89
159

10
10
10
10

'

o 3K DRALL set of TORX

5.50
7.05
8.90
14.30

'

Code
'

96 48 99 10
'

l Cross-head

4670 VDE

screwdrivers DRALL+

46 70 10 00
46 70 10 01
46 70 10 02

PZ
size

L1
mm

L2
mm

R
g

0
1
2

60
80
100

145
185
215

36
46
89

10
10
10

'

175 x 350 x 35 mm, 7 pieces


6.85
8.80
11.10

'

Code

'

96 83 81 84

555

'

No 4820

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm

No 4830

sizes 1; 2; 3

Screwdrivers
'

4891

104.60

'

'

TCS 4820/4830

POZIDRIV/SUPADRIV, IEC 60900 C,


safety insulated, blade gunmetal
finished, Chrome Alloy Steel.

Code

513

3K DRALL set of screwdrivers

'

Set of 6 3K DRALL
screwdrivers.
Content:
r 4820: 0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm
k 4830: size 1; size 2

79.75

TCS 4724/4840+10767

'

Code
'

96 48 91 10
'

530

530 x 350 x 45 mm, 24 pieces


'

47.25

Code

'

4892

96 83 07 06

3K DRALL set of screwdrivers

1755

'

Set of 8 3K DRALL
screwdrivers
Content:
r 4820: 0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm
1.6 x 8.0 x 175 mm
k 4830: size 1; size 2; size 3

size 1 (0.4 x 2.5 x 60 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 4820

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.2 x 6.5 x 150 mm
1.6 x 10.0 x 200 mm
2.0 x 12.0 x 250 mm

No 4830
No 4840

sizes 1; 2; 3
size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

'

'

'

'

Code
'

96 48 92 10
'

'

745

73.65

271.85

No 4628

'

No 7756
'

No 12922E
'

O 6 mm

229

Screwdrivers
r 3K DRALL screwdrivers

4820

o 3K DRALL TORX

4856

for slotted screws

screwdrivers

DIN 5265, ISO 2380, Chrome Alloy Steel, matt chrome plated, black tips.

with hollow point


(TORX TAMPER RESISTANT),
Chrome Alloy Steel,
matt chrome plated, black tips.

L1
L2

'

'

Code

a
mm

b
mm

L1
mm

L2
mm

R
g

48 20 10 35
48 20 10 40
48 20 20 55
48 20 10 65

0.6
0.8
1.0
1.2

3.5
4.0
5.5
6.5

75
100
125
150

170
195
220
265

23
32
58
100

10
10
10
10

48 20 10 80
48 20 11 00
48 20 21 00

1.6
1.6
2.0

8.0
10.0
12.0

175
200
250

290
315
375

118
158
218

10
5
5

'

'

Code

size

mm

L1
mm

L2
mm

R
g

6.35
6.50
8.45
9.05

48 56 00 06
48 56 00 07
48 56 00 08
48 56 00 09

T6*
T7
T8
T9

1.6
2.0
2.3
2.5

50
50
60
60

145
145
155
155

45
37
50
50

5
5
5
5

8.55
9.15
9.15
9.40

13.60
14.80
18.90

48 56 00 10
48 56 00 15
48 56 00 20
48 56 00 25

T10
T15
T20
T25

2.7
3.3
3.8
4.4

80
80
100
100

175
175
215
215

26
52
32
55

5
5
5
5

9.50
9.95
10.40
12.50

48 56 00 27
48 56 00 30
48 56 00 40

T27
T30
T40

5.0
5.5
6.6

115
115
115

230
230
240

58
63
86

5
5
5

13.60
13.80
16.30

'

k 3K DRALL cross-head

4830

screwdrivers

'

Phillips-Recess,
DIN 5262, ISO 8764,
Chrome Alloy Steel,
matt chrome plated, black tips.

* without hollow point


'

Electronics Screwdrivers

'

PH
size

L1
mm

L2
mm

R
g

48 30 10 00
48 30 10 01
48 30 10 02
48 30 10 03

0
1
2
3

60
80
100
150

155
175
215
275

28
33
70
126

10
10
10
5

6.25
7.25
9.65
12.80

48 30 10 04

200

325

251

16.70

Code
'

'

l 3K DRALL cross-head

4840

screwdrivers

4797

Electronics screwdrivers set

7 pieces
Content:
r 4751: size 4 (0.3 x 1.5 x 40 mm)
size 6 (0.4 x 2.0 x 60 mm)
size 7 (0.4 x 2.5 x 75 mm)
size 8 (0.5 x 3.0 x 75 mm)
k 4752: size 00, size 0, size 1

POZIDRIV/SUPADRIV,
DIN 5262, ISO 8764,
Chrome Alloy Steel,
matt chrome plated, black tips.
'

'

Code
'

48 40 10 01
48 40 10 02

PZ
size

L1
mm

1
2

80
100

'

L2
mm
175
215

R
g

33
70

S
10
10

Code
'

8.55
10.70

96 47 97 10
'

L2
'

175 x 350 x 40 mm, 7 pieces


'

R
g

96 83 87 55

447

'

No 4856
'

size

a
mm

b
mm

L1
mm

L2
mm

R
g

47 51 00 01
47 51 00 02
47 51 00 03
47 51 00 04

1
2
3
4

0.16
0.18
0.25
0.3

0.8
1.0
1.2
1.5

40
40
40
40

140
140
140
140

12
12
12
19

5
5
5
5

6.55
6.55
5.80
4.85

94.40

47 51 00 05
47 51 00 06
47 51 00 07
47 51 00 08

5
6
7
8

0.3
0.4
0.4
0.5

1.8
2.0
2.5
3.0

60
60
75
75

160
160
175
175

10
19
14
16

5
5
5
5

4.25
4.35
4.55
4.55

sizes T8; T9; T10; T15; T20; T25; T30

'

230

43.90

L1

'

'

Code

Code

r Screwdrivers for slotted screws

4751

TCS 4856

285

k Cross-head screwdrivers

4752
Phillips-Recess.

DIN 3125,
Chrome Vanadium,
chrome plated.

'

Code

size

L1
mm

L2
mm

47 52 00 10
47 52 00 20
47 52 00 01

00
0
1

40
60
80

140
160
180

'

'

k americ. O
M

No

mm

2
23

01
24

2.5
3
4.5

R
g

19
13
24

5
5
5

'

6.55
5.70
5.30

i Hexagon socket screwdrivers

4753

c Nut spinners DRALL+

12500N

Code
'

47 53 00 07
47 53 00 09
47 53 00 13
47 53 00 15

mm/"

L1
mm

L2
mm

R
g

0.7 / 0.028
0.9 / 0.035
1.3 / 0.050
1.5

40
40
40
50

140
140
140
150

14
14
19
18

5
5
5
5

'

4798

6.25
5.95
5.15
5.15

R
g

125
125
125
125

230
230
230
230

58
49
58
58

10
10
10
10

9.05
9.05
9.05
9.30

43 09 10 06
43 09 10 07
43 09 10 08
43 09 10 09

6
7
8
9

125
125
125
125

240
240
240
240

98
114
115
118

10
10
10
10

9.05
10.20
10.50
11.30

43 09 10 10
43 09 10 11
43 09 10 12
43 09 10 13

10
11
12
13

125
125
125
125

240
250
250
250

122
160
168
170

10
5
5
5

11.60
15.50
16.50
17.20

L2
mm

4
4.5
5
5.5

mm

'

'

L1
mm

43 09 10 04
43 09 10 45
43 09 10 05
43 09 10 55

Code

'

c Nut spinners DRALL+

12506
flexible,
max. torque 8 N m,
matt chrome plated.

Set of reversible screwdrivers

11 pieces
Content:
r 0.6 x 3.5; 0.8 x 4.0; 1.0 x 5.5;
1.2 x 6.5 mm
k sizes 1; 2
l sizes 1; 2
i 3; 4; 5; 6 mm
i 3; 4; 5; 6 mm (ball end)
n T10; T15; T20; T25; T30; T40

'

Code
'

43 10 02 06
43 10 02 07
43 10 02 08

mm

L1
mm

L2
mm

R
g

6
7
8

150
150
150

265
265
265

167
168
170

10
10
10

'

15.80
15.90
16.00

c T-handled nut spinners

12507-2K

with 2-component T-handle, Chrome Vanadium, matt chrome plated.

'

Code

675

'

96 47 98 01
'

104.00

L1
L2

r EURO voltage tester

10554

'

built to conform to the new


EN standard, tested to conform
to the currently valid VDE GS
standard, with plastic handle,
AC 125250 V.

Code
77 45 00 01
'

L1
mm

L2
mm

R
g

43 23 20 60
43 23 20 70
43 23 20 80
43 23 20 90

6
7
8
9

200
200
200
200

224
234
234
234

83
133
135
137

10
10
10
10

13.00
15.80
15.80
16.60

43 23 21 00
43 23 21 10
43 23 21 20
43 23 21 30

10
11
12
13

200
200
200
200

234
240
240
240

141
169
171
176

10
5
5
5

16.70
19.60
20.50
20.80

'

'

'

mm

Code

a
mm

b
mm

L
mm

R
g

3.5

190

37

10

4.40

'

ES 12500N/7

175 x 350 x 39 mm, 7 pieces


'

Code

'

96 83 82 00

1060

'

No 12500N
'

83 81 30 85
'

Empty tray

101.65

sizes 7; 8; 9; 10; 11; 12; 13 mm


103

8.85

231

Screwdrivers
r Offset screwdrivers

10546

i Hexagon key wrenches

10760CV

DIN 5200, for slotted screws, centre handle covered with impact proof
plastic, Chrome Vanadium, chrome plated.

DIN ISO 2936 (metric), for socket head screws,


Chrome Vanadium, nickel-plated (sizes 0.7; 0.9; 1.3 mm, gunmetal finish).

a
90

L1
L2

'

L1
mm

L2
mm

0.7/0.028
0.9/0.035
1.3/0.050
1.5

8
10
12
14

32
32
40
45

1
1
1
1

10
10
10
10

1.40
1.40
0.95
0.65

43 15 00 02
43 15 02 50
43 15 00 03
43 15 03 50

2
2.5
3
3.5

16
18
20
22

50
56
63
66

2
3
4
7

10
10
10
10

0.65
0.65
0.80
0.80

43 15 00 04
43 15 00 05
43 15 00 06
43 15 00 07

4
5
6
7

25
28
32
34

70
80
90
95

10
18
29
42

10
10
10
10

0.95
1.30
1.35
1.50

43 15 00 08
43 15 00 09
43 15 00 10
43 15 00 11

8
9
10
11

36
38
40
42

100
105
112
119

59
80
103
130

10
10
10
10

1.80
2.35
2.85
3.45

43 15 00 12
43 15 00 14
43 15 00 17
43 15 00 19

12
14
17
19

45
56
63
70

125
140
160
180

169
261
442
603

5
5
5
5

4.00
6.25
11.00
14.90

43 15 00 22
43 15 00 24
43 15 00 27
43 15 00 30

22
24
27
30

80
90
100
112

200
224
250
280

938
1248
1692
2434

1
1
1
1

25.50
29.70
37.00
67.00

43 15 00 32
43 15 00 36

32
36

125
140

315
355

3117
4430

1
1

82.50
93.00

L
'

Code
'

73 27 20 01
73 27 20 02
73 27 20 03
73 27 20 04

size

a
mm

b
mm

L
mm

R
g

1
2
3
4

0.6
0.8
1
1.2

3.5
4
5.5
8

90
100
125
150

8
12
29
69

10
10
10
10

'

10551

6.00
6.75
7.80
9.50

k Offset screwdrivers

43 15 00 70
43 15 00 90
43 15 01 30
43 15 01 50
1

'

Code

PH
size

L
mm

R
g

73 28 20 12
73 28 20 23

1x2
2x3

125
150

30
72

10
10

'

mm/"

'

DIN 5208, for recessed head


screws, Phillips-Recess,
centre handle covered with impact
proof plastic, Chrome
Vanadium, chrome plated.

'

Code

6.95
11.40

10760CV R/8 Hexagon key wrenches


on ring, for socket head screws,
Chrome Vanadium, nickel-plated.

'

i Hexagon key wrenches

10760aCV
'

6
'

Code
'

96 43 15 21
'

260

L1
mm

L2
mm

0.7/0.028
0.9/0.035
1.3/0.050
3/64

8
10
12
14

32
32
40
45

1
1
1
1

10
10
10
10

1.40
1.40
0.95
0.65

43 55 00 04
43 55 00 05
43 55 00 06
43 55 00 07

1/16
5/64
3/32
7/64

15
16
17
20

45
50
51
54

1
2
3
4

10
10
10
10

0.65
0.65
0.65
1.00

43 55 00 08
43 55 00 09
43 55 00 10
43 55 00 12

1/8
9/64
5/32
3/16

22
23
25
29

57
63
65
70

5
7
10
15

10
10
10
10

1.05
1.05
1.05
1.30

43 55 00 14
43 55 00 16
43 55 00 18
43 55 00 20

7/32
1/4
9/32
5/16

32
32
35
40

80
87
95
98

23
32
45
59

10
10
10
10

1.40
1.55
1.70
1.80

43 55 00 22
43 55 00 24
43 55 00 28
43 55 00 32

11/32
3/8
7/16
1/2

41
45
48
50

105
110
124
133

75
95
143
200

10
10
10
5

2.50
2.95
4.05
4.85

43 55 00 34
43 55 00 36
43 55 00 40
43 55 00 44

9/16
5/8
3/4
7/8

57
59
70
80

152
160
180
200

380
380
605
945

5
5
5
1

6.45
10.40
16.50
29.50

mm/"

43 15 00 70
43 15 00 90
43 15 01 30
43 55 00 03
1

10.20

Content: 2; 2.5; 3; 4; 5; 6; 8; 10 mm
'

Hexagon key wrenches


in holder, DIN ISO 2936 (metric),
for socket head screws,
Chrome Vanadium, nickel-plated.

'

Code

No

96 43 15 01
96 43 55 01
96 43 55 02

10760CV/9 1)
10760aCV/10Pc 2)
10760aCV/13 3)

'

'

R
g

245
269
124

1
1
1

10.70
11.10
12.10

) Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm


) Content: 1/16; 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8" (in plastic-wallet)
3
) Content (in two holders): 0.028; 0.035; 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64;
5/32; 3/16; 7/32; 1/4"
1
2

'

232

Code
'

'

i Hexagon key wrenches

10765/9

n Key wrenches

10766

for socket head screws,


DIN ISO 2936, extra long,
in holder, Chrome Vanadium,
nickel-plated.
Content:
1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

for inside TORX screws,


Chrome Vanadium, chrome plated.

'

Code

size

mm

L1
mm

L2
mm

43 22 00 06
43 22 00 07
43 22 00 08
43 22 00 09

T6
T7
T8
T9

1.6
2.0
2.3
2.5

16
16
16
16

38
41
44
48

2
2
3
3

10
10
10
10

4.45
4.45
4.45
4.45

43 22 00 10
43 22 00 15
43 22 00 20
43 22 00 25

T10
T15
T20
T25

2.7
3.3
3.8
4.4

17
18
19
20

51
54
57
60

3
5
7
9

10
10
10
10

4.70
4.80
5.10
5.30

43 22 00 27
43 22 00 30
43 22 00 40
43 22 00 45

T27
T30
T40
T45

5.0
5.5
6.6
7.8

21
24
26
29

64
70
76
83

15
20
29
42

10
10
10
10

5.80
5.75
6.90
8.15

43 22 00 50
43 22 00 55
43 22 00 60

T50
T55
T60

8.8
11.2
13.2

32
35
38

95
108
120

61
122
185

10
10
10

9.85
14.80
16.60

'

Code
'

96 43 21 01
'

410

'

13.10

i Hexagon key wrenches

10765

DIN ISO 2936, for socket head screws, extra long,


Chrome Vanadium, nickel-plated.

90

L1

L2
'

Code
'

mm

L1
mm

L2
mm

R
g

'

43 21 00 15
43 21 00 02
43 21 00 25
43 21 00 03

1.5
2
2.5
3

14
16
18
20

90
100
112
126

3
3
5
9

10
10
10
10

0.75
0.75
1.00
1.00

43 21 00 04
43 21 00 05
43 21 00 06
43 21 00 07

4
5
6
7

25
28
32
34

140
160
180
190

17
31
50
74

10
10
10
10

1.35
1.60
1.75
3.00

43 21 00 08
43 21 00 09
43 21 00 10
43 21 00 12

8
9
10
12

36
38
40
45

200
210
224
250

100
135
179
287

10
10
10
5

3.50
4.40
4.85
6.45

43 21 00 14
43 21 00 17
43 21 00 19

14
17
19

56
63
70

280
320
360

440
742
1048

5
5
5

9.80
17.00
23.50

'

n Key wrenches

10771/8

'

Code
'

96 43 27 01
'

290

40.30

n Key wrenches

for inside TORX screws,


extra long,
with ball end on long arm,
swivel angle up to 25 each side,
Chrome Vanadium,
gunmetal finish.

for inside TORX screws,


in holder, Chrome Vanadium,
chrome plated.

'

'

Code

No

96 43 22 01
96 43 22 02

10766/6 )
10766/9 2)

'

'

101
120

1
1

) Content: sizes T15; T20; T25; T27; T30; T40


) Content: sizes T8; T9; T10; T15; T20; T25; T27; T30; T40

1
2
'

for inside TORX screws,


extra long,
with ball end on long arm,
swivel angle up to 25 each side,
in holder, Chrome Vanadium,
gunmetal finished.
Content:
sizes T9; T10; T15; T20; T25; T27; T30; T40

10771

Key wrenches

Code

size

mm

L1
mm

L2
mm

R
g

43 27 00 10
43 27 00 15
43 27 00 20
43 27 00 25

T10
T15
T20
T25

2.7
3.3
3.8
4.4

23
27
29
33

121
136
148
163

10
15
20
24

5
5
5
5

6.15
6.25
6.65
7.10

43 27 00 27
43 27 00 30
43 27 00 40

T27
T30
T40

5.0
5.5
6.6

36
38
43

176
191
210

28
30
35

5
5
5

7.60
7.75
9.00

'

19.60
26.80

'

233

Screwdrivers
Ball ended hexagon key wrenches

for hexagon key wrenches,


swivel angle up to 25 each side,
with ball end on long arm,
facilitates quick, safe work in
awkward places, screws stay on the head once attached,
Chrome Vanadium, gunmetal finish.

'

Code

No

96 43 26 01
96 43 57 01
96 43 57 02

10767/9 1)
10767a/8 2)
10767a/13 3)

'

'

420
283
465

5
1
1

27.40
23.70
34.40

) Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm


) Content: 5/64; 3/32; 1/8; 5/32; 3/16; 7/32; 1/4; 5/16"
3
) Content: 0.050; 1/16; 5/64; 3/32; 7/64; 1/8; 9/64; 5/32; 3/16; 7/32; 1/4; 5/16; 3/8"
1
2

'

i Ball ended hexagon key wrenches

for hexagon socket head screws,


with ball end on long arm,
swivel angle up to 25 each side,
Chrome Vanadium, gunmetal finish.

mm

L1
mm

L2
mm

R
g

46 23 10 03
46 23 10 04
46 23 10 05
46 23 10 06

3
4
5
6

20
25
28
32

126
140
160
180

8
17
30
50

10
10
10
5

4.05
4.20
4.55
5.50

46 23 10 08
46 23 10 10

8
10

36
40

200
224

100
175

5
5

8.05
10.40

Code
'

Code

mm/"

L1
mm

L2
mm

R
g

43 57 01 30
43 26 00 15
43 26 00 02
43 26 00 25

1.3/0.050
1.5
2
2.5

12
14
16
18

72
90
100
112

1
1.5
3
5.5

10
10
10
10

2.25
2.90
2.60
2.60

43 26 00 03
43 26 00 04
43 26 00 05
43 26 00 06

3
4
5
6

20
25
28
32

126
140
160
180

9
18
31
50

10
10
10
10

2.50
2.85
3.20
4.05

43 26 00 08 8
43 26 00 10 10
43 26 00 12 12

36
40
45

200
224
224

100
188
297

10
10
10

5.70
7.15
8.20

'

'

'

Angled key wrenches

'

with various different drivers, ball-end internal


hexagon (metric), TORX.
Blades are crafted in high-alloy, corrosion-free
chrome nickel steel.
Blade points on internal hexagons are chamfered
to facilitate insertion into the screw head.
100% greater torque thanks to thickened neck
area on ball-end. Holder made of fibreglass
reinforced plastic, extremely heavy duty, with an
ergonomically shaped grip. Blades are pivotable in
the holder up to 270, making them ideal for work
in confined spaces.

i Ball ended hexagon key wrenches

10767a

'

10767

10761TX*

'

L2
mm

Code

mm/"

43 57 01 30
43 57 00 04
43 57 00 05
43 57 00 06

1.3/0.050
1/16
5/64
3/32

12
14
16
18

72
80
89
101

1
1.5
3
5

10
10
10
10

2.25
2.25
2.25
2.25

43 57 00 07
43 57 00 08
43 57 00 09
43 57 00 10

7/64
1/8
9/64
5/32

20
20
23
25

111
121
136
149

7
9.5
13
16

10
10
10
10

2.25
2.25
2.25
2.35

43 57 00 12
43 57 00 14
43 57 00 16
43 57 00 20

3/16
7/32
1/4
5/16

26
29
31
36

163
170
179
189

27
42
60
102

10
10
10
10

2.45
3.00
3.45
4.20

43 57 00 24

3/8

38

200

164

10

6.30

'

n TORX

Content:
T9; T10; T15; T20; T25; T27; T30; T40

L1
mm

'

i Ball ended hexagon key wrenches

10767H

in holder,
Chrome Vanadium,
gunmetal finish.

'

Code
'

43 36 00 03
'

148

20.70

* to be discontinued
'

10767H/9

i Set: Ball ended hexagon

10761KK*

key wrenches

i Ball end metric

Content:
4; 5; 6; 8; 10 mm

for recessed hexagonal screws,


swivel angle up to 25 each side,
from size 3 mm with ring,
with ball end on long arm,
facilitates quick, safe work in
awkward places, screws stay on the head once attached, in holder,
Chrome Vanadium, gunmetal finish.
Content: 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm
'

Code
'

96 43 26 02
'

'

401

42.80

Code
'

43 36 00 04
'

* to be discontinued
'

234

R
g

230

23.80

ES 10768/6

i Hexagon key wrenches

10768-2K

with 2-component T-handle, for socket head screws, with two tips,
Chrome Vanadium, matt chrome plated, black tips.

L1
L2

'

350 x 350 x 37 mm, 6 pieces


'

Code

'

96 83 81 19

780

'

Code

mm

L1
mm

L2
mm

R
g

43 25 20 20
43 25 20 25
43 25 20 30
43 25 20 40

2
2.5
3
4

100
100
150
150

125
125
174
176

33
42
42
51

10
10
10
10

8.70
8.90
9.40
11.50

200
200
200
200

227
228
235
235

73
92
178
247

10
10
5
5

12.00
13.00
17.00
24.40

'

66.40

No 10768

sizes 3; 4; 5; 6; 8; 10 mm

'

83 81 20 42

Empty tray

'

209

16.80

43 25 20 50
43 25 20 60
43 25 20 80
43 25 21 00

5
6
8
10

'

i T-handled screwdrivers

10768

ES 10769/7

for socket head screws, Chrome Vanadium,


matt chrome plated, black tips.

175 x 350 x 35 mm, 7 pieces

L1
L2

'

L2
mm

R
g

Code

mm

43 25 00 20
43 25 00 25
43 25 00 30
43 25 00 40

2
2.5
3
4

100
100
150
150

116
116
166
175

10
10
20
40

10
10
10
10

5.25
5.30
5.55
6.10

200
200
200
200

225
225
235
235

60
80
150
210

10
10
5
5

6.65
7.20
9.80
14.30

'

43 25 00 50
43 25 00 60
43 25 00 80
43 25 01 00

5
6
8
10

'

96 83 81 20

No 10769
83 81 20 43
'

58.15

sizes T10; T15; T20; T25; T27; T30; T40

'

Empty tray

116

8.65

6
n TORX-T-handled screwdrivers

10769

for inside TORX screws,


shaft nickel-plated and chrome
plated, tips hardened,
Chrome Vanadium, matt chrome
plated, black tips.

'

Code

size

mm

L1
mm

L2
mm

R
g

43 29 00 08
43 29 00 09
43 29 00 10
43 29 00 15

T8
T9
T10
T15

2.3
2.5
2.7
3.3

80
80
100
100

96
96
116
116

10
10
10
20

5
5
5
10

5.70
6.10
6.15
6.15

43 29 00 20
43 29 00 25
43 29 00 27
43 29 00 30

T20
T25
T27
T30

3.8
4.4
5
5.5

100
110
110
130

125
135
135
155

30
40
50
60

10
10
10
10

6.25
6.85
6.80
7.40

43 29 00 40
43 29 00 45
43 29 00 50

T40
T45
T50

6.6
7.8
8.8

130
130
130

165
165
165

100
120
140

10
10
5

9.90
11.10
12.70

'

530 x 350 x 30 mm, 19 pieces


'

Code

'

96 83 06 21

1640

'

159.00

No 10765/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10768

sizes 2.5; 3; 4; 5; 6; 8; 10 mm

No 12507-2K

sizes 8; 10; 13 mm

'

450

'

TCS 10765/10768/12507/19

'

'

L1
mm

'

Code

'

'

235

Screwdrivers
TCS 10769+10771/17

o TORX screwdrivers with T-handle

10769B

with hollow point


(TORX TAMPER RESISTANT),
shaft nickel-plated and
chrome plated, tips hardened,
Chrome Vanadium,
matt chrome plated,
black tips.
'

'

R
g

'

96 83 20 99

940

'

147.10

No 10769

sizes T9; T10; T15; T20; T25; T30; T40;


T45; T50

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30;


T40

'

size

mm

L1
mm

L2
mm

R
g

43 30 00 10
43 30 00 15
43 30 00 20
43 30 00 25

T10
T15
T20
T25

2.7
3.3
3.8
4.4

100
100
100
110

116
116
125
135

20
20
30
40

5
5
5
5

6.15
6.15
6.55
6.80

43 30 00 27
43 30 00 30
43 30 00 40
43 30 00 45

T27
T30
T40
T45

5.0
5.5
6.6
7.8

110
130
130
130

135
155
165
165

50
50
100
110

5
5
5
5

7.20
7.85
10.50
10.90

'

350 x 350 x 30 mm, 17 pieces

Code

Code

'

10757

'

Four-sided bradawl

for punching and preparing


leather, plastics and other soft
materials and for marking holes
in wood to prevent wood screws slipping off the mark.

ES 10769B/7

'

Code

L
mm

Blade
mm

R
g

77 59 10 00

200

6 x 100

100

'

175 x 350 x 35 mm, 7 pieces

'

'

Code

'

96 83 81 29

450

'

No 10769B
'

83 81 20 43
'

236

Empty tray

59.85

sizes T10; T15; T20; T25; T27; T30; T40


116

8.65

5.60

Pliers

Pliers

Accurate. Strong. Dependable.


STAHLWILLE pliers, cutters and wrenches

For accurate work and a powerful grip with comfy-fit multi-component handles.
When you are working with pliers, your hand needs optimum support and protection in the
places where the pressure exerted on the hand is felt most keenly through ergonomic
handle design. STAHLWILLE has integrated softer layers in these sections of the handles.
In this way, they fulfil two important functions. They prevent the hand slipping off the handle
and, at the same time, absorb the shock produced when hard wires are cut. Even with oily or
greasy hands, the textured surface ensures you still have a good grip on things. The special
plastic we have used is also resistant to aggressive fluids and, at the end of the lifecycle,
can be properly disposed of, because it does not contain PVC.

3
1

2
4
6

238

Accurate gripping! By using high-grade materials and applying our sophisticated

Clean, effortless cutting! Thanks to specially hardened, high-precision cutters.

Strain-free working and longer tool lifetimes! Thanks to smooth-action lap-joints.

Prevents injuries! The anti-slip protection prevents your hands slipping off

Longer tool lifetime and resistance to aggressive fluids! Thanks to impact-resistant,

No pinch marks and strain-free working! The ergonomically positioned softer

manufacturing techniques, we are able to achieve remarkable accurately shaped jaws.

towards the jaws.

extremely hard-wearing special plastic.

layers improve force transmission.

1,000 volts no problem.


STAHLWILLE pliers and cutters

STAHLWILLE VDE pliers & cutters are manufactured to meet the current demands
of EN 60900 and are individually tested. They are designed to provide maximum possible
protection when the user is working with voltages of 1,000 volts AC.

Voltage testing
All STAHLWILLE VDE pliers and cutters are tested to AC 10,000 volts and are
certified up to 1,000 volts. In other words, with a tenfold safety margin.

The electrical insulation


After being submerged in water for 24 hours, the pliers and cutters are subjected
to 10,000 volts AC and, at the same time, the leakage current is measured for
three minutes. There must be no dielectric breakdown or arcing.

Testing resistance to fire


The danger of fire can only be combatted through the use of non-flammable PVC.
During the test, the flame on the handle must not exceed a height of 120 mm
within 20 seconds.

Pressure tests
When they are subjected to a load of 20 N m and a temperature of 70C, there
must be no dielectric breakdown or arcing when the tools are subjected
to 5,000 volts AC.

Cold impact tests


The insulated handles are subjected to 2 hours at 25C in a freezer and must still
be tough enough not to shatter or break when knocked.

Testing the adherence of the PVC coating


The handles must still be firmly attached to the tools after about 168 hours
in a heat cabinet at 70C. This stripping test on the PVC covers is carried out for
three minutes at 500 N.

239

Pliers

Combination Pliers
6501

Combination pliers

DIN ISO 5746, precision cutting edges for all wires, incl. piano wire, induction hardened cutting edges, approx. 62 HRC, for long life.

65 01 3 160

65 01 5 160

65 01 6 160

'

L
mm

Head

Handles

65 01 3 160 160
65 01 3 180 180
65 01 3 200 200

polished

multi-component handles with softer layers

1.8
2
2.5

1.5
1.8
2

10
12
13

16
16
16

183
250
312

17.90
18.80
21.10

65 01 5 160 160
65 01 5 180 180
65 01 5 200 200

chrome plated

multi-component handles with softer layers

1.8
2
2.5

1.5
1.8
2

10
12
13

16
16
16

210
235
368

20.00
21.40
23.70

65 01 6 160 160
65 01 6 180 180
65 01 6 200 200

polished

dip-coated with sure-grip surface

1.8
2
2.5

1.5
1.8
2

10
12
13

16
16
16

163
190
263

13.70
14.70
16.90

Code
'

'

e Cutting capacity in mm for hard wire


t Cutting capacity in mm for cable

r Cutting capacity in mm for piano wire


z Cutting capacity in mm2 for cable

'

Flat Nose Pliers


6507

Flat nose pliers, short

DIN ISO 5745, short, flat serrated jaws.

L3

65 07 5 160

65 07 6 160

'

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

65 07 5 160 160

chrome plated

multi-component handles with softer layers

30

17

10

180

22.20

65 07 6 160 160

polished

dip-coated with sure-grip surface

30

17

10

151

18.00

Code
'

L
mm

'

6508

Flat nose pliers, long

DIN ISO 5745, long, flat serrated jaws.

L3

65 08 5 160

65 08 6 160

'

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

65 08 5 160 160

chrome plated

multi-component handles with softer layers

50

15

160

22.70

65 08 6 160 160

polished

dip-coated with sure-grip surface

50

15

113

17.60

Code
'

L
mm

'

6509

Flat nose pliers, long, with cutter

designed for gripping and manipulating electronic


components, long, thin, flat serrated jaws,
induction hardened cutting edges, approx. 60 HRC,
for soft and hard wires.

h
L3
W

'

Code
'

L
mm

65 09 5 160 160
'

240

Head

Handles

L3
mm

W
mm

D
mm

h
mm

chrome plated

multi-component handles with softer layers

50

15

b
mm

164

32.70

6510

Mechanics flat nose pliers

designed for use in fine mechanical and electronics


industries, flat, slim, long serrated jaws, box joint,
for long life, serrated gripping areas.

h
L3

'

Code
'

L
mm

65 10 5 190 190
'

6516

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

75

13.5

8.5

4.5

128

30.10

Mechanics flat nose pliers

designed for use by instrument mechanics,


flat blunt, serrated jaws, wear resistant.

h
L3

'

Code
'

L
mm

65 16 5 200 200
'

6511

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

40

13.5

9.5

2.5

9.5

158

34.60

Relay pliers

DIN 5235, Form A, flat pointed,


for use on contact and relay springs and
on small components, smooth jaws.

h
L3

'

Code
'

L
mm

65 11 5 135 140
'

6512

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

33

13

7.5

1.5

75

22.50

Relay pliers

DIN 5235, Form B, flat blunt,


for use on contact and relay springs and
on small components, smooth jaws.

h
L3

'

Code
'

L
mm

65 12 5 135 140
'

6513

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

33

13

7.5

3.5

78

22.50

Relay pliers

DIN 5235, Form C, flat bent, 45 in line with jaws,


for use on contact and relay springs and on small
components, smooth jaws.

h
L3
W

'

Code
'

L
mm

65 13 5 135 140
'

6514

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

31

13

7.5

3.5

80

22.70

Relay pliers

DIN 5235, Form E, flat bent, 90 angle to jaws,


for use on contact and relay springs and on small
components, smooth jaws.

h
L3
W

'

Code
'

L
mm

65 14 5 135 140
'

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

33

13

7.5

76

23.50
241

Pliers
6518

Mechanics gripping pliers

Form A, flat blunt, designed for use by


instrument mechanics, wide precision jaws,
smooth, tapering to 1.5 mm,
box joint for precise movement.

h
L3

'

Code
'

L
mm

65 18 5 130 130
'

6519

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

24

11.5

6.5

75

23.90

Mechanics gripping pliers

Form B, flat pointed, designed for use by


instrument mechanics, flat pointed precision
jaws, smooth, tapering to 1.5 mm,
box joint for precise movement.

h
L3

'

Code
'

L
mm

65 19 5 130 130
'

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

24

11.5

1.5

72

23.90

Round Nose Pliers


6523

Round nose pliers, short

DIN ISO 5745, for bending wire loops and rings,


short, round, ground jaws,
fine serrations on gripping areas.

b
L3
T

'

Code
'

L
mm

65 23 5 160 160
'

6524

Head

Handles

L3
mm

W
mm

D
mm

b
mm

chrome plated

multi-component handles with softer layers

30

18

10

185

20.50

Round nose pliers, long

DIN ISO 5745, for bending wire loops and rings,


long, round, ground jaws,
fine serrations on gripping areas.

b
L3
T

'

Code
'

L
mm

65 24 5 160 160
'

6525

Head

Handles

L3
mm

W
mm

D
mm

b
mm

chrome plated

multi-component handles with softer layers

47

15.5

8.5

2.5

155

22.30

Mechanics round nose pliers

for bending wire loops, round precision jaws,


smooth, 1.0 point diameter,
box joint for precise movement.

b
L3
T

'

Code
'

L
mm

65 25 5 130 130
'

242

Head

Handles

L3
mm

W
mm

D
mm

b
mm

chrome plated

dip-coated with sure-grip surface

22

11.5

70

24.50

Snipe Nose Pliers


6529

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form A (straight), half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires,
induction hardened cutting edges, approx. 60 HRC.
b

h
L3

65 29 3 160

65 29 5 160

65 29 6 160

'

Code

L
mm

L3
mm

W
mm

D
mm

h
mm

b
mm

multi-component handles with softer layers

44
51
73

15
16
17

8
9
9

2.5
3
3

2
2.5
2.5

113
155
197

20.30
21.90
23.80

chrome plated

multi-component handles with softer layers

44
51
73

15
16
17

8
9
9

2.5
3
3

2
2.5
2.5

115
170
220

22.50
25.30
31.20

polished

dip-coated with sure-grip surface

44
51
73

15
16
17

8
9
9

2.5
3
3

2
2.5
2.5

92
148
187

16.00
16.80
22.30

Head

Handles

65 29 3 145 140
65 29 3 160 160
65 29 3 200 200

polished

65 29 5 145 140
65 29 5 160 160
65 29 5 200 200
65 29 6 145 140
65 29 6 160 160
65 29 6 200 200

'

'

6530

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form B, bent 45, half round, long tapering, serrated jaws, with burner hole, precision cutting edges for soft and hard wires,
induction hardened cutting edges, approx. 60 HRC.

L2

L3
W

65 30 3 200

65 30 5 200

65 30 6 200

'

Code

L
mm

L2
mm

L3
mm

W
mm

D
mm

h
mm

b
mm

multi-component handles with softer layers

24
28

55
76

16
17

9
9

3
3.5

2.5
3

170
198

25.30
28.00

chrome plated

multi-component handles with softer layers

24
28

55
76

16
17

9
9

3
3.5

2.5
3

170
220

25.80
29.90

polished

dip-coated with sure-grip surface

24
28

55
76

16
17

9
9

3
3.5

2.5
3

146
178

23.10
24.30

Head

Handles

65 30 3 160 160
65 30 3 200 200

polished

65 30 5 160 160
65 30 5 200 200
65 30 6 160 160
65 30 6 200 200

'

'

6531

Mechanics snipe nose pliers

Form A (straight), designed for use on miniature


electronic and mechanical components,
haft round extra thin, long tapering jaws with
fine serration, box joint for precise movement.

h
L3

'

Code
'

L
mm

65 31 5 170 170
'

6532

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

63

13.5

2.5

100

27.30

Mechanics snipe nose pliers

Form B, bent 45, designed for use on miniature


electronic and mechanical components,
half round extra thin, long tapering jaws with fine
serrations, box joint for precise movement.

L2
T

L3
W

'

Code
'

L
mm

65 32 5 170 170
'

Head

Handles

L2
mm

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

24

54

13.5

2.5

102

30.20

243

Pliers
6533

Mechanics snipe nose pliers

half round, long tapering, serrated jaws.

h
L3

'

Code
'

L
mm

65 33 5 160 160
'

6534

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

50

15

2.5

129

22.70

Mechanics snipe nose pliers

Form A (straight), half round, long tapering,


serrated jaws.

h
L3

65 34 5 200

65 34 5 280

'

Code
'

L
mm

65 34 5 200 200
65 34 5 280 280
'

6535

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated
chrome plated

multi-component handles with softer layers


dip-coated with sure-grip surface

76
73

16
20

10
9.5

3
3

2.5
2.5

220
255

26.90
24.10

Mechanics snipe nose pliers

Form B (bent 45), half round, long tapering,


serrated jaws.

L2

65 355 200

L3
W

65 355 280

'

Code
'

L
mm

65 35 5 200 200
65 35 5 280 280
'

6536

Head

Handles

L2
mm

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated
chrome plated

multi-component handles with softer layers


dip-coated with sure-grip surface

28
28

68
66

17
20

9.5
9.5

3.5
3

3
2.5

220
255

29.40
28.40

Snipe nose pliers (needle pliers)

DIN ISO 9655, Form A (straight),


designed for use on electronic components,
half round, extra long tapering jaws,
fine serration.

h
L3

'

Code
'

L
mm

65 36 5 160 160
'

6537

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

58

15

8.5

110

26.30

Snipe nose pliers (needle pliers)

Form B, bent 45, designed for use on electronic


components, half round, extra long tapering jaws,
fine serration.

L2
T

L3
W

'

Code
'

L
mm

65 37 5 160 160
'

244

Head

Handles

L2
mm

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

25

54

14

115

28.00

6538

Mechanics snipe nose pliers

designed for use on miniature mechanical


components, half round tapering jaws,
wear resisting serration.

h
L3

'

Code
'

L
mm

65 38 5 200 200
'

Head

Handles

L3
mm

W
mm

D
mm

h
mm

b
mm

chrome plated

dip-coated with sure-grip surface

38

13

9.5

2.5

157

25.90

Circlip Pliers
6543

Circlip pliers for inside circlips

DIN 5256 C, straight, H.D. drop forged,


precision points.

65 43 4 002

65 43 6 002

'

Code

size

L
mm

O mm

65 43 4 000
65 43 4 001
65 43 4 002
65 43 4 003
65 43 4 004

J0
J1
J2
J3
J4

140
140
180
225
320

0.9
1.3
1.8
2.3
3.2

65 43 6 000
65 43 6 001
65 43 6 002
65 43 6 003
65 43 6 004

J0
J1
J2
J3
J4

140
140
180
225
320

0.9
1.3
1.8
2.3
3.2

'

'

6544

tips

for circlip sizes


mm

Head

Handles

813
1225
1960
40100
85140

matt chrome plated

chrome plated, chequered

90
90
135
195
419

16.00
16.60
17.20
19.80
36.70

813
1225
1960
40100
85140

polished

dip-coated with sure-grip surface

100
100
150
215
462

14.30
14.70
15.00
18.30
33.00

Circlip pliers for inside circlips

DIN 5256 D, bent 90, H.D. drop forged,


precision points.

65 44 4 021

65 44 6 021

'

Code

size

L
mm

O mm

65 44 4 001
65 44 4 011
65 44 4 021
65 44 4 031
65 44 4 041

J 01
J 11
J 21
J 31
J 41

130
130
170
215
300

0.9
1.3
1.8
2.3
3.2

65 44 6 001
65 44 6 011
65 44 6 021
65 44 6 031
65 44 6 041

J 01
J 11
J 21
J 31
J 41

130
130
170
215
300

0.9
1.3
1.8
2.3
3.2

'

'

tips

for circlip sizes


mm

Head

Handles

813
1225
1960
40100
85140

matt chrome plated

chrome plated, chequered

90
90
135
195
416

16.40
17.00
18.50
22.40
42.90

813
1225
1960
40100
85140

polished

dip-coated with sure-grip surface

100
100
150
215
432

14.30
14.70
17.10
20.80
39.90

245

Pliers
6545

Circlip pliers for outside circlips

DIN 5254 A, straight, H.D. drop forged, precision


points, with wear resistant compression spring.

65 45 4 002

65 45 6 002

'

Code

size

L
mm

O mm

for circlip sizes


mm

65 45 4 000
65 45 4 001
65 45 4 002
65 45 4 003
65 45 4 004

A0
A1
A2
A3
A4

140
140
180
210
315

0.9
1.3
1.8
2.3
3.2

65 45 6 000
65 45 6 001
65 45 6 002
65 45 6 003
65 45 6 004

A0
A1
A2
A3
A4

140
140
180
210
315

0.9
1.3
1.8
2.3
3.2

'

'

6546

tips

Head

Handles

310
1025
1960
40100
85140

matt chrome plated

chrome plated, chequered

95
95
145
205
437

18.10
17.60
18.40
21.00
42.10

310
1025
1960
40100
85140

polished

dip-coated with sure-grip surface

105
105
160
232
491

16.30
15.50
16.60
18.30
38.10

Circlip pliers for outside circlips

DIN 5254 B, bent 90, H.D. drop forged, precision


points, with wear resistant compression spring.

65 46 4 021

65 46 6 021

'

Code

size

L
mm

O mm

for circlip sizes


mm

65 46 4 001
65 46 4 011
65 46 4 021
65 46 4 031
65 46 4 041

A 01
A 11
A 21
A 31
A 41

125
125
170
200
290

0.9
1.3
1.8
2.3
3.2

65 46 6 001
65 46 6 011
65 46 6 021
65 46 6 031
65 46 6 041

A 01
A 11
A 21
A 31
A 41

125
125
170
200
290

0.9
1.3
1.8
2.3
3.2

'

'

6547

tips

Head

Handles

310
1025
1960
40100
85140

matt chrome plated

chrome plated, chequered

95
95
145
111
431

20.60
18.00
20.80
23.20
43.50

310
1025
1960
40100
85140

polished

dip-coated with sure-grip surface

105
105
160
236
468

18.50
16.60
17.60
20.50
38.30

Special circlip pliers for slotted circlips

for slotted circlips (as used on shafts of engines,


gearboxes, differentials, clutches etc.),
with wear resistant compression spring.

65 47 4 170

65 47 6 170

'

Code

L
mm

Head

Handles

65 47 4 170 170

matt chrome plated

chrome plated, chequered

154

31.50

65 47 6 170 170

polished

dip-coated with sure-grip surface

162

29.00

'

'

246

Waterpump Pliers
6551

Waterpump pliers

DIN ISO 8976 (No 207 c), box joint, 7 adjustment


positions (175 mm 6 adjustment positions),
anti-squeeze protection, Chrome Vanadium.

65 51 5 240

65 51 6 175

'

Code

L
mm

Jaw opening
max. mm

65 51 5 240

240

65 51 6 175
65 51 6 240
65 51 6 300

175
240
300

'

'

6572

Head

Handles

43

chrome plated

multi-component handles with softer layers

365

27.10

26
43
51

black lacquered, jaws polished

black lacquered, box frame polished, dip-coated

173
330
520

15.80
17.80
27.20

Waterpump pliers FastGRIP

patent, box joint with dual support, fast


adjustment on the work piece via push button,
freely adjustable, easy super fine adjustment with
10 snap-in points (180 mm), 12 snap-in points
(240 mm), 15 snap-in points (300 mm),
induction hardened jaw toothing extremely hard
and durable, safety clamping protection against
squeezing injuries, Chrome Vanadium.

65 72 6 240

'

Code
'

L
mm

Jaw opening
max. mm

65 72 6 180 180
65 72 6 240 240
65 72 6 300 300

28
37
44

'

6573

Head

Handles

polished

dip-coated with sure-grip surface

236
393
530

26.60
28.30
38.00

PowerGRIP pliers wrench

patent, box joint, fast adjustment via button press


directly on the work piece, freely adjustable,
easy super fine adjustment, high transmission ratio
for noticeable amplification of manual force,
for work pieces with parallel surfaces
65 73 5 300
(nuts, screws etc.), also ideal for bending thin
parallel work pieces (e.g. metal sheet),
parallel jaws without profile to protect surface coated work pieces, Ratchet effect for screws by using the jaw stroke,
extremely resistant overall construction, high quality tempered.
'

Code
'

L
mm

Jaw opening
max. mm

65 73 5 180 192
65 73 5 250 253
65 73 5 300 300

36
46
60

'

6554

Head

Handles

chrome plated

dip-coated with sure-grip surface

291
490
640

54.00
60.50
72.50

Waterpump pliers, with rapid adjustment

DIN ISO 8976 (No 207 c), box joint hook


adjustment, jaw with slot, Chrome Vanadium.
65 54 4 250

'

Code
'

L
mm

Jaw opening
max. mm

65 54 4 250 250 1)
65 54 4 375 375
'

50
70

Head

Handles

chrome plated

chrome plated, chequered

R
g

476
1066

52.00
90.00

) anti-squeeze protection

1
'

Spare springs for No 6554


'

Code

Spare spring for No

69 54 0 002
69 54 0 003

65544250
65544375

'

'

R
g

3
4

1.95
2.80
247

Pliers
6555

MINI-waterpump pliers

Chrome Vanadium.

'

Code
'

L
mm

Jaw opening
max. mm

65 55 5 125 125

15

'

6549

Head

Handles

chrome plated

dip-coated

R
g

78

17.20

Pipe wrenches

Type B, 45, DIN 5234.

65 49 0 315
'

L
mm

Code

size

65 49 0 315
65 49 0 420
65 49 0 555

1
326
1 1/2 440
2
560

'

'

6556

Jaw opening
max. mm
45
61
82

Head

Handles

red lacquered

red lacquered

R
g

715
1626
2780

48.70
68.50
99.00

Swedish pattern wrenches

Type A, 90, DIN 5234.

65 56 0 310
'

Code

size

L
mm

Jaw opening
max. mm

65 56 0 310
65 56 0 420
65 56 0 560

1
1 1/2
2

316
422
542

47
63
82

'

'

6557

Head

Handles

red lacquered

red lacquered

R
g

780
1560
2676

47.30
71.00
107.00

S-shaped Swedish pattern wrenches

Type C, DIN 5234.

65 57 0 320
'

Code

size

L
mm

Jaw opening
max. mm

65 57 0 320
65 57 0 416
65 57 0 535

1
1 1/2
2

327
440
560

47
66
81

'

'

6558

Head

Handles

red lacquered

red lacquered

R
g

811
1595
2677

47.80
69.00
101.00

Heavy Duty pipe wrenches

US-standard GGG-W-651 Type II, category A.

65 58 0 300
'

Code

size

L
mm

Jaw opening
max. mm

65 58 0 250
65 58 0 300
65 58 0 350
65 58 0 450
65 58 0 600

10"
12"
14"
18"
24"

250
300
350
450
600

49
61
61
77
90

'

'

248

Head

Handles

black lacquered

red lacquered

R
g

805
1255
1655
2660
4295

27.60
32.20
36.80
52.50
81.50

6559

Stillson pipe wrenches

US-standard GGG-W-651 Type I, category A.

65 59 0 250

'

Code

size

L
mm

Jaw opening
max. mm

65 59 0 250
65 59 0 300
65 59 0 350
65 59 0 450
65 59 0 600

10"
12"
14"
18"
24"

250
300
350
450
600

35
43
49
61
77

'

'

Head

Handles

black lacquered

red lacquered

550
750
1080
1850
3000

24.90
28.50
33.10
45.00
74.50

Self Grip Wrenches


6561

Wide jaw self grip wrench

80 mm jaw width, quick release lever,


Chrome Vanadium.

'

L
mm

S
mm

Head

Handles

65 61 2 175 175

20

bright nickel-plated

bright nickel-plated

Code
'

'

6562

364

41.00

Parallel jaw self grip wrench

forged jaws, quick release lever,


Chrome Vanadium.

'

L
mm

S
mm

Head

Handles

65 62 2 250 250

50

bright nickel-plated

bright nickel-plated

Code
'

'

6562/1
6562/2

700

44.60

Parallel jaw self grip wrenches

forged jaws, quick release lever, for small round


parts (V-cutout in one jaw) and also suitable for
larger workpieces, also ideal for gently gripping
sensitive workpieces, Chrome Vanadium.

7
6562/1

6562/2

'

L
mm

S
mm

65 62 2 100 250
65 62 2 200 250

100
200

Code
'

'

Head

Handles

bright nickel-plated

bright nickel-plated

R
g

985
1154

83.50
88.00

Plastic protective jaws for parallel jaw self grip wrenches No 6562/1 and No 6562/2
1 pair, provides additional protection for clamped workpieces.
'

Code
'

69 62 0 001
'

R
g

14

5.75
249

Pliers
6563

Universal self grip wrenches

forged jaws (one straight, one contoured),


quick release lever, Chrome Vanadium.

65 63 2 175
'

L
mm

S
mm

65 63 2 175 175
65 63 2 250 250

25
30

Code
'

'

6564

Head

Handles

bright nickel-plated

bright nickel-plated

320
500

20.20
22.40

Self grip wrenches

forged contoured jaws, quick release lever,


wire cutter, Chrome Vanadium.

S
65 64 2 175

'

Code

L
mm

S
mm

65 64 2 145
65 64 2 175
65 64 2 250
65 64 2 300

145
175
250
300

14
30
40
65

'

'

6565

Head

Handles

bright nickel-plated

bright nickel-plated

175
323
550
977

18.20
21.50
22.80
44.60

Welders self grip wrench

with quick release lever, Chrome Vanadium.

'

L
mm

S
mm

Head

Handles

65 65 2 280 280

65

bright nickel-plated

bright nickel-plated

Code
'

'

6566

941

37.90

Pipe welders self grip wrench

with quick release lever, Chrome Vanadium.

'

L
mm

S
mm

Head

Handles

65 66 2 280 280

85

bright nickel-plated

bright nickel-plated

Code
'

'

6567

944

39.80

C-Clamp self grip wrenches

with quick release lever, Chrome Vanadium.

65 67 2 280
'

L
mm

S
mm

65 67 2 175 175
65 67 2 280 280

75
85

Code
'

'

250

Head

Handles

bright nickel-plated

bright nickel-plated

R
g

236
694

18.20
33.70

6568

Long reach grip wrenches

extra large capacity, quick release lever,


Chrome Vanadium.

65 68 2 460
'

L
mm

S
mm

65 68 2 460 460
65 68 2 600 600

180
240

Code
'

'

6571

Head

Handles

bright nickel-plated

bright nickel-plated

R
g

1100
1372

85.00
89.50

Long nose self grip wrench

specially suitable for narrow, tapering access,


with quick-release lever, Chrome Vanadium.

'

L
mm

S
mm

Head

Handles

65 71 2 165 165

23

bright nickel-plated

bright nickel-plated

Code
'

'

R
g

190

18.30

Various Gripping Pliers


6575

Wire twisting pliers

for wire locking of metal fasteners, with side


cutter, serrated jaws for positive grip, jaws angled
by 40, suitable for locking wires up to O 1.6 mm
(dec. in. 0.06),
for clockwise and anticlockwise use,
with automatic return action, Chrome Vanadium.

65 75 1 280

65 75 1 220

'

Code

L
mm

65 75 1 220
65 75 1 280

230
280

'

'

6576N

Head

Handles

gunmetal finish, polished

gunmetal finish

R
g

330
440

140.00
150.00

Connector pliers

replaceable plastic jaws, 4 adj. positions,


for use on screw connections incl. Canon-connectors,
or any light alloy or other tube connections,
surfaces of which must not be damaged,
Chrome Vanadium.

'

Code
'

L
mm

65 76 5 231 230
'

Head

Handles

chrome plated

dip-coated

R
g

288

52.50

Loose plastic jaws for No 6576N


'

Code
'

69 76 0 001
'

R
g

7.05

251

Pliers

Side Cutters
Side cutters N

6600

DIN ISO 5749, Form B, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened,
approx. 63 HRC.
b

h
e

66 00 3 160

66 00 5 160

66 00 6 160

'

Code

L
mm

66 00 3 130
66 00 3 145
66 00 3 160
66 00 3 180

e
mm

17
8.6
18.5
8.2
22.5
9.5
23.5 11

2.8
3
3
3.8

2.3
2.5
2.8
3

1.5
1.8
2
2.5

1.25
1.6
1.6
2

110
147
188
252

21.90
23.80
23.10
24.40

24
25.7
29.5
32

17
8.6
18.5
8.2
22.5
9.5
23.5 11

2.8
3
3
3.8

2.3
2.5
2.8
3

1.5
1.8
2
2.5

1.25
1.6
1.6
2

105
160
205
325

21.60
24.20
24.20
27.00

24
25.7
29.5
32

17
8.6
18.5
8.2
22.5
9.5
23.5 11

2.8
3
3
3.8

2.3
2.5
2.8
3

1.5
1.8
2
2.5

1.25
1.6
1.6
2

100
121
165
205

20.30
21.20
18.80
20.60

polished

multi-component handles with softer layers

24
25.7
29.5
32

66 00 5 130
66 00 5 145
66 00 5 160
66 00 5 180

125
140
160
180

chrome plated multi-component handles with softer layers

66 00 6 130
66 00 6 145
66 00 6 160
66 00 6 180

125
140
160
180

polished

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire

125
140
160
180

'

b
mm

Handles

dip-coated with sure-grip surface

h
mm

Head

'

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

'

Side cutter M

6601

as No 6600, mini bevel,


fitted with double leaf spring.

h
e

'

Code
'

L
mm

66 01 6 110 110
'

Head

Handles

e
mm

h
mm

b
mm

polished

dip-coated with sure-grip surface

15

15

8.5

2.5

1.5

1.2

0.8

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire

69

18.50

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

'

Heavy duty side cutters N

6602

DIN ISO 5749, Form A, precision cutting edges for all wires incl. piano wire, high quality alloy steel, bevelled cutting edges induction hardened,
approx. 63 HRC.

h
e

66 02 3 200

66 02 5 200

66 02 6 200

'

Code

L
mm

66 02 3 140
66 02 3 160
66 02 3 180
66 02 3 200
66 02 3 250

h
b
mm mm

multi-component handles with softer layers

23.5
25.5
27.5
31
32

20
9
25
9.5
26.5 10.5
28 11.5
29.5 12

4
4
4
4
4

3.1
3.4
3.8
4
4

2
2.5
2.7
3
3.5

1.5
2
2.2
2.5
3

156
203
251
305
407

25.60
27.50
29.00
31.00
35.90

140
160
180
200
250

chrome plated multi-component handles with softer layers

23.5
25.5
27.5
31
32

20
9
25
9.5
26.5 10.5
28 11.5
29.5 12

4
4
4
4
4

3.1
3.4
3.8
4
4

2
2.5
2.7
3
3.5

1.5
2
2.2
2.5
3

145
200
290
310
400

30.70
33.00
34.80
36.60
39.90

140
160
180
200
250

polished

23.5
25.5
27.5
31
32

20
9
25
9.5
26.5 10.5
28 11.5
29.5 12

4
4
4
4
4

3.1
3.4
3.8
4
4

2
2.5
2.7
3
3.5

1.5
2
2.2
2.5
3

140
170
230
260
375

23.70
24.60
25.80
26.90
27.50

Handles

140
160
180
200
250

polished

66 02 5 140
66 02 5 160
66 02 5 180
66 02 5 200
66 02 5 250
66 02 6 140
66 02 6 160
66 02 6 180
66 02 6 200
66 02 6 250
'

dip-coated with sure-grip surface

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

252

e
mm

Head

'

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

Oblique Cutter
Mechanics oblique cutter M

6612

suitable for use on miniature mechanical and


electronic components, precision cutting edges for
hard and soft wire, head angled by 28,
Cu-wire 0.25 mm O may be cut at tips,
alloy steel of highest quality, induction hardened
mini-bevelled cutting edges, approx. 60 HRC.

h
e

'

Code

L
mm

66 12 5 185

185 chrome plated dip-coated with sure-grip surface

'

'

Head

Handles

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire

e
mm

h
mm

b
mm

14

13.5

9.5

1.8

1.5

R
g

145

28.20

w Cutting capacity in mm for medium hard wire

'

Top Cutters
Top cutters, heavy duty N

6618

DIN ISO 5748, precision cutting edges for all


wires, incl. piano wire, alloy steel of highest
quality, induction hardened bevelled cutting
edges, approx. 63 HRC.

b2

h
e

b1

66 18 5 160

66 18 6 160

'

Code
'

L
mm

Head

Handles

e
mm

h
mm

b1
mm

b2
mm

R
g

66 18 5 160 160

chrome plated multi-component handles with softer layers

17

26

11.5

24

3.8

2.5

240

34.70

66 18 6 160 160

polished

17

26

11.5

24

3.8

2.5

225

29.00

'

dip-coated with sure-grip surface

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

'

6617

Lever action top cutters

DIN ISO 5748, for piano wire, special steel.

66 17 0 215

'

Code
'

L
mm

66 17 0 180 180
66 17 0 215 215
66 17 0 235 235

Head

Handles

polished

black lacquered

3.5
4
4

3
3.5
3.5

2.5
2.8
3

2.25
2.5
2.75

'

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

R
g

394
440
467

56.50
61.00
78.50

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

253

Pliers

Wire Stripping Pliers


6622

Wire stripping pliers

with adjustment screw to cut insulation only on


wire or cable, max. 5 mm O 10 mm2 conductor
cross-section.

66 22 5 160

66 22 6 160

'

Code

L
mm

Head

Handles

66 22 5 160 160

chrome plated

multi-component handles with softer layers

195

25.90

66 22 6 160 160

polished

dip-coated with sure-grip surface

180

22.70

'

'

6623

Wire stripping pliers

for wires from 0.5 to 5 mm O, self adjusting,


cutter hole for cutting wire or stranded wires up
to 5 mm O, special steel.

'

Code
'

L
mm

66 23 5 160 160
'

Head

Handles

chrome plated

multi-component handles with softer layers

180

49.80

Replacement stripping knives (1 pair) for No 6623


'

Code

'

69 23 0 001

11

'

6624

16.50

Wire stripping pliers

for wires from 0.3 to 1.2 mm O, self adjusting,


cutter hole for cutting wire or stranded wires up
to 5 mm O, special alloy steel.

'

Code
'

L
mm

66 24 5 160 160
'

Head

Handles

chrome plated

multi-component handles with softer layers

186

50.00

Cable Shear
6630

Cable shear

for copper- and light alloy cables.


Easy, single handed operation.
Special cutting edges geometry to avoid pressure
marks and frayed ends, adjustable joint,
anti-squeeze protection, not suitable for steel- or
armoured cables.

'

Code
'

L
mm

66 30 5 220 220
'

Head

Handles

chrome plated

dip-coated with sure-grip surface

u cutting capacity in mm2 for single wire Al-/Cu-Cable


o cutting capacity in mm2 for thin wire Al-/Cu-Cable
'

254

16

35

70

i cutting capacity in mm2 for multiple wire Al-/Cu-Cable

R
g

332

53.00

Crimping Pliers
6634

Crimping pliers

with half round profile,


for reliable crimping of terminal sleeves
DIN 46228, 8 deep slots with tapering side walls,
crimping within the size marked profiles in one
operation.
'

Code

L
mm

66 34 6 220

220 gunmetal finish

'

'

6637

Head

Handles

crimping range
mm2

dip-coated with sure-grip surface

0.25; 0.5; 0.75; 1; 1.5; 2.5; 4; 6; 10; 16

240

Handles

crimping range
mm2

with plastic sleeves

0.08 - 10

298

58.50

Crimping pliers

for use with terminal sleeves with or without an


insulating collar in accordance with DIN 46228
1 high precision crimping
1 easy-action force transmission coupled with
simple handling
1 unlockable autolock
1 accurately ground profiles
1 crimp shape: 1
'

Code

L
mm

66 37 0 195

195 gunmetal finish

'

'

6638

Head

190.00

Crimping pliers

for red/blue/yellow insulated cable lugs, pin-type


cable lugs, flat plugs and sleeves, round plugs and
sleeves, butt and parallel connectors
1 unlockable autolock
1 easy handling
1 stripping and cutting device, refer to No 6966
1 crimp shape: 5

'

Code

L
mm

66 38 0 220

220 gunmetal finish

'

Head

Handles
with plastic sleeves

'

6639

crimping range
mm2
red = 0.51(AWG 2018); blue = 1.52.5 (AWG 1614);
yellow = 46 (AWG 1210)

R
g

477

112.00

Crimping pliers

for non-insulated flat plugs and flat sleeves for


nominal DIN widths F2.8; F4.8; F6.3; F9.5
1 unlockable autolock
1 easy handling
1 stripping and cutting device, refer to No 6966
1 crimp shape: 2
'

Code

L
mm

66 39 0 220

220 gunmetal finish

'

Head

Handles
with plastic sleeves

'

6640

crimping range
mm2
0.250.5 (AWG 2420); 0.51 (AWG 2018);
46 (AWG 1210); 1.52.5 (AWG 1614)

R
g

483

112.00

Crimping pliers

for non-insulated cable lugs and tubular cable lugs


with closed crimp sleeves
1 unlockable autolock
1 easy handling
1 stripping and cutting device, refer to No 6966
1 crimp shape: 3
'

Code

L
mm

66 40 0 220

220 gunmetal finish

'

'

Head

Handles
with plastic sleeves

crimping range
mm2
0.10.35 (AWG 2622); 0.51 (AWG 2018);
1.52.5 (AWG 1614); 46 (AWG 1210); 1016 (AWG 86)

R
g

465

112.00
255

Pliers
6641

Crimping pliers

for use with terminal sleeves with or without an


insulating collar in accordance with DIN 46228
1 unlockable autolock
1 easy handling
1 stripping and cutting device, refer to No 6966
1 crimp shape: 4
'

Code

L
mm

66 41 0 220

220 gunmetal finish

'

'

6966

Head

Handles

crimping range
mm2

with plastic sleeves

0.140.5; 0.751.5; 2.5; 4; 6; 10

536

116.00

Stripping and cutting tool

for stripping wires from 0.5 to 6 mm O.


Cables can also be cut.
For use with crimping pliers
No 6638, 6639, 6640 and 6641.

'

Code

'

69 66 0 000

37

'

38.50

Various Cutting Pliers


6660

Steel fixers pincers

DIN ISO 9242, limit on opening angle to ensure


single-handed closure (registered design), little
effort required due to optimised cutter geometry,
induction-hardened cutters provide excellent
resistance to wear, special steel, drop-forged,
oil hardened
'

Code
'

L
mm

66 60 1 220 224
66 60 1 250 250
66 60 1 280 280

Head

Handles

polished

black lacquered

'

6661

R
g

318
420
434

17.20
18.90
21.00

Pincers

DIN ISO 9243, special steel, drop-forged,


oil hardened.

'

Code
'

L
mm

66 61 1 180 180
66 61 1 200 200

Head

Handles

polished

black lacquered

'

6662

R
g

322
350

14.60
15.20

Heavy Duty steel fixer pincers

DIN ISO 9243, induction-hardened cutting edges,


high wear resistance, extremely low cutting force
effort due to very large lever effect and optimum
cutting edges geometry. Clearly damped cutting
shock due to elastic pliers body, therefore ideal for continuous use special steel. Ultra-slim design, ideal for binding recessed reinforcing bars.
Special steel, drop-forged, oil hardened.
'

Code
'

L
mm

66 62 4 300 300
'

256

Head

Handles

chrome plated, polished

chrome plated

R
g

478

30.60

6702

Set with 4 pliers, chrome plated

Handles chequered, in plastic inlay


Content:
6543 Circlip pliers, J2
6544 Circlip pliers, J21
6545 Circlip pliers, A2
6546 Circlip pliers, A21
'

Code

'

96 65 00 04

590

'

6706

74.90

Sets of pliers in plastic inlays also


suitable for Workbench No 92KM G,
Tool trolleys No 91B, 91P, 97N,
97N/KM, 97H/8, 97H/KM,
Tool boxes No 94N, 94N/KM,
Magazine case No 920 and
Wheely box No 922N
(Modular system see page 44-69)

Set with 3 pliers, polished

dip-coated, in plastic inlay

ES 65016602/7A

Content:
6501 Combination pliers, 180 mm
6602 Heavy duty side cutter,
160 mm
6529 Snipe nose pliers, 200 mm
'

Code

530 x 350 x 40 mm, 7 pieces

'

'

96 65 00 08

750

'

61.60

Code

'

6703

96 83 81 21

Set with 3 pliers, chrome plated

'

multi-component handles with


softer layers, in plastic inlay

No 65 01 5 180
No 65 29 5 200
'

No 65 43 4 002
'

No 65 45 4 002
'

No 65 51 6 240

'

'

'

96 65 00 05

810

'

185.70

'

Content:
6501 Combination pliers, 180 mm
6602 Heavy duty side cutter,
160 mm
6529 Snipe nose pliers, 200 mm

Code

2085

No 65 64 2 250
85.60

'

No 66 02 5 160
'

6705

83 81 20 21

Set with 3 pliers, polished

'

Empty tray

307

23.90

dip-coated, in plastic inlay

ES 65016602/7B
Content:
6551 Waterpump pliers, 240 mm,
lacquered
6501 Combination pliers, 180 mm
6602 Heavy duty side cutter,
160 mm

'

530 x 350 x 40 mm, 7 pieces

Code

'

'

96 65 00 07

880

'

57.10

Code

'

96 83 81 32

2055

'

6704

Set with 3 pliers, chrome plated

182.10

No 65 01 5 200

multi-component handles with


softer layers (No 6501, 6602),
in plastic inlay

'

No 65 29 5 160
'

No 65 43 4 002

Content:
6551 Waterpump pliers, 240 mm
6501 Combination pliers, 180 mm
6602 Heavy duty side cutter,
160 mm

'

No 65 45 4 002
'

No 65 51 6 240
'

No 65 64 2 250
'
'

Code
'

96 65 00 06
'

No 66 02 5 160

950

'

72.20

83 81 20 21
'

Empty tray

307

23.90
257

Pliers
TCS 65016602/4

TCS 65436546/4

175 x 350 x 35 mm, 4 pieces

175 x 350 x 30 mm, 4 pieces

'

'

Code

'

Code

'

96 83 81 79

1010

'

123.10

96 83 06 08

626

'

No 65 01 5 180

94.60

No 65 43 4 002

'

'

No 65 29 5 200

No 65 44 4 021

'
'

No 65 51 6 240
'

No 65 45 4 002
'

No 66 02 5 160
'

No 65 46 4 021
'

TCS 65016602/4N

TCS 65346545/6

175 x 350 x 35 mm, 4 pieces


'

Code

'

96 83 06 22

1080

'

137.80

No 65 01 5 180
'

350 x 350 x 30 mm, 6 pieces


No 65 29 5 200

'

'

Code

No 65 72 6 240

'

'

96 83 21 00

1070

'

No 66 02 5 160
'

No 65 34 5 280
'

TCS 65436564/3

No 65 35 5 200
'

No 65 43 4 001
No 65 43 4 002
'

No 65 45 4 001
No 65 45 4 002
'

175 x 350 x 30 mm, 3 pieces


'

Code

'

96 83 81 80

815

'

No 65 43 4 002
'

No 65 45 4 002
'

No 65 64 2 250
'

258

78.10

157.50

Electronics Pliers, suitable for electrostatic discharge (ESD) applications Z


Electronics flat nose pliers Z

6517

DIN ISO 9655, designed for use on miniature electronic


and mechanical components, welded on double leaf
spring, precision jaws, smooth, tapering to 1 mm,
box joint for precise movement.

h
L3

'

Code
'

L
mm Head

65 17 6 120 125 polished


'

Handles

L3 W
D
h
b R
mm mm mm mm mm g

dip-coated with sure-grip surface, ESD applications

20

6.5

1.5

48

23.80

Electronics round nose pliers Z

6526

DIN ISO 9655, designed for use on miniature electronic


and mechanical components, welded on double leaf
spring, round precision jaws, smooth, thin, 1.25 mm point
diameter, box joint for precise movement.

b
L3

'

Code
'

L
mm Head

65 26 6 120 125 polished


'

Handles

L3 W
D
mm mm mm

b R
mm g

dip-coated with sure-grip surface, ESD applications

22

1.25 45

6.5

25.80

Electronics snipe nose pliers Z

6540

DIN ISO 9655, designed for use on miniature electronic


and mechanical components, welded on double leaf
spring, half round, smooth precision jaws tapering to
1 mm O, box joint for precise movement.

h
L3

'

Code
'

L
mm

65 40 6 120 125
'

Head

Handles

L3 W
D
h
b R
mm mm mm mm mm g

polished

dip-coated with sure-grip surface, ESD applications

21

6.5

50

24.20

Electronics side cutter Z M

6603

strong, slim pattern, suitable for use on miniature


electronic components, precision cutting edges,
mini bevel, suitable for soft and hard wire,
incl. piano wire, Cu-wire of 0.2 mm O can be cut at the
tips, welded on double leaf spring, alloy steel of highest
quality, induction hardened cutting edges approx. 63 HRC.

h
e

'

Code
'

L
mm

Head

66 03 6 115 115 polished


'

Handles

e
h
b
mm mm mm q

dip-coated with sure-grip surface, ESD applications

14

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

w e

R
g

11 6.5 1.5 1 0.8 0.5 60 21.90

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

Electronics side cutter Z M

6605

DIN ISO 9654, with wire catch to prevent uncontrolled


disposal of off-cuts, box joint for precise movement,
precision cutting edges, mini bevel, suitable for soft and
hard wire, welded on double leaf spring, alloy steel of
highest quality, induction hardened cutting edges,
approx. 63 HRC.

h
e

'

Code
'

L
mm

Head

66 05 6 110 112 polished


'

Handles

e
h
b
mm mm mm q

dip-coated with sure-grip surface, ESD applications

13 10.5 7

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

w e

R
g

1.5 1 0.8 0.6 64 33.30

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire
259

Pliers
Electronics side cutters Z M

6606

DIN ISO 9654, strong model, box joint for precise


movement, precision cutting edges, mini bevel, suitable
for piano wire, Cu-wire 0.25 mm O can be cut at tips,
welded on double leaf spring, alloy steel of highest
quality, induction hardened cutting edges,
approx. 63 HRC.

h
e

'

Code
'

L
mm

Head

66 06 6 110 112 polished


66 06 6 130 125

e
h
b
mm mm mm q

Handles
dip-coated with sure-grip surface, ESD applications

13
18

'

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

w e

12 7.5 1.5 1 0.8 0.6 66 30.30


16 10
1.7 1.2 1
0.8 104 31.00

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

Electronics side cutters Z L

6607

DIN ISO 9654, slim tapered head for use in confined


spaces, box joint for precise movement, precision cutting
edges, no bevel suitable for flush cutting of soft and
medium hard wire, Cu- and diode wires, welded on
double leaf spring, alloy steel of highest quality,
induction hardened cutting edges, approx. 63 HRC.

h
e

'

Code
'

L
mm

Head

66 07 6 110 112 polished


66 07 6 130 125

Handles
dip-coated with sure-grip surface, ESD applications

'

q Cutting capacity in mm for soft wire


'

e
h
b
mm mm mm q

13
18

1
1

12 7.5 1.5
16 10
1.5

R
g

64
104

30.20
31.90

w Cutting capacity in mm for medium hard wire

Mini-electronics side cutter Z M

6604

DIN ISO 9654, light, slim pattern,


especially suitable for use on miniature electronic
components, precision cutting edges, mini bevel,
suitable for soft and hard wire,
Cu-wire of 0.2 mm O can be cut at the tips,
welded on double leaf spring, alloy steel of highest quality,
induction hardened cutting edges, approx. 63 HRC.

h
e

'

Code
'

L
mm

Head

66 04 6 110 112 polished


'

Handles

e
h
b
mm mm mm q

dip-coated with sure-grip surface, ESD applications

11

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

6613

w e

R
g

1 0.8 0.6 0.4 47 21.80

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

Electronics oblique cutter Z M

DIN ISO 9654, tapered head for use in confined spaces,


precision cutting edges for hard and soft wire,
head angled by 55, Cu-wire 0.25 mm O may be cut at
the tips, welded on double leaf spring, alloy steel of
highest quality, induction hardened mini-bevelled cutting
edges, approx. 62 HRC.

b2

h
e

b1

'

Code
'

L
mm Head

66 13 6 115 112 polished


'

dip-coated with sure-grip surface, ESD applications

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

260

e
h b1 b2
mm mm mm mm q

Handles

11

w e

R
g

11 7.5 10.5 1 0.8 0.6 0.4 54 26.30

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

Electronics oblique cutter Z L

6614

DIN ISO 9654, as No 6613,


but without bevelled cutting edges, for flush cutting of
soft and medium hard Cu- and diode wires.

b2

h
e

b1

'

Code
'

L
mm

Head

66 14 6 115 112 polished


'

Handles

e
h b1
b2
mm mm mm mm q

dip-coated with sure-grip surface, ESD applications

11

0.6

11 7.5 10.5 1

R
g

55 26.30

q Cutting capacity in mm for soft wire


w Cutting capacity in mm for medium hard wire
'

Electronics oblique cutter Z M

6615

DIN ISO 9654, slim, extended head for delicate cuts in


confined spaces, box joint for precise movement,
precision cutting edges with mini bevel for Cu- and diode
wires, head angled by 30, welded on double leaf spring,
alloy steel of highest quality.

L2
L3

b
h

'

Code
'

L
mm

Head

66 15 6 115 112 polished


'

L2 L3 h
b
mm mm mm mm q

Handles
dip-coated with sure-grip surface, ESD applications

q Cutting capacity in mm for soft wire


'

18

6 0.6 0.3

47 33.90

w Cutting capacity in mm for medium hard wire

Electronics top cutter Z M

6619

DIN ISO 9654, slim long head for use in confined space,
box joint for precise movement, precision cutting edges
for Cu- and diode wires, mini-bevel, welded on double
leaf spring, alloy steel of highest quality.

b2

h
e

b1

'

Code
'

L
mm

Head

66 19 6 115 112 polished


'

e W h
b1 b2
mm mm mm mm mm q

Handles
dip-coated with sure-grip surface, ESD applications

q Cutting capacity in mm for soft wire


'

15.5 8.5 5.5

R
g

5 0.6 0.3 65 30.70

w Cutting capacity in mm for medium hard wire

Electronics top cutter Z M

6620

DIN ISO 9654, precision cutting edges for soft and hard
wires, mini-bevel, head angled 90, pointed head,
Cu-wire 0.25 mm O may be cut at the tips,
welded on double leaf spring, alloy steel of highest
quality, induction hardened cutting edges,
approx. 60 HRC.

b2

h
e

b1

'

Code
'

L
mm

Head

66 20 6 115 112 polished


'

Handles

e
h b1 b2
mm mm mm mm q

dip-coated with sure-grip surface, ESD applications

6.5 11 7.5 11

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire
'

w e

R
g

1 0.8 0.6 0.4 82 26.90

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

Electronics top cutter Z L

6621

DIN ISO 9654, as No 6620, but without bevelled cutting


edge, for flush cutting of soft and medium hard Cu- and
diode wires, alloy steel of highest quality,
induction hardened cutting edges, approx. 60 HRC.

b2

h
e

b1

'

Code
'

L
mm

Head

66 21 6 115 112 polished


'

Handles

e
h b1 b2
mm mm mm mm q

dip-coated with sure-grip surface, ESD applications

6.5 11 7.5 11

0.6

q Cutting capacity in mm for soft wire


'

R
g

82 26.90

w Cutting capacity in mm for medium hard wire


261

Pliers

VDE Pliers
6501

Combination pliers

DIN ISO 5746, precision cutting edges for all


wires, incl. piano wire, induction hardened cutting
edges, approx. 62 HRC, for long life.
65 01 7 160

65 01 8 160

'

L
mm

Head

Handles

65 01 7 160 160
65 01 7 180 180
65 01 7 200 200

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

1.8
2
2.5

1.5
1.8
2

10
12
13

16
16
16

202
279
359

31.50
33.40
37.20

65 01 8 160 160
65 01 8 180 180
65 01 8 200 200

chrome plated

insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

1.8
2
2.5

1.5
1.8
2

10
12
13

16
16
16

186
250
317

27.20
28.90
31.30

Code
'

'

e Cutting capacity in mm for hard wire


t Cutting capacity in mm for cable

r Cutting capacity in mm for piano wire


z Cutting capacity in mm2 for cable

'

6507

Flat nose pliers, short

DIN ISO 5745, short, flat serrated jaws.

L3

65 07 7 160

65 07 8 160

'

Head

Handles

L3 W
D
h
b
mm mm mm mm mm

65 07 7 160 160

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

30

17

10

200

32.90

65 07 8 160 160

chrome plated

insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

30

17

10

181

28.80

Code
'

L
mm

'

6508

Flat nose pliers, long

DIN ISO 5745, long, flat serrated jaws.

L3

65 08 7 160

65 08 8 160

'

Head

Handles

L3 W
D
h
b
mm mm mm mm mm

65 08 7 160 160

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

50

15

148

39.00

65 08 8 160 160

chrome plated

insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

50

15

166

32.90

Code
'

L
mm

'

6523

Round nose pliers, short

DIN ISO 5745, for bending wire loops and rings,


short, round, ground jaws, fine serrations on
gripping areas.

b
L3
T

65 23 7 160

65 23 8 160

'

Head

Handles

L3 W
D
b
mm mm mm mm

65 23 7 160 160

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

30

18

10

201

30.80

65 23 8 160 160

chrome plated

insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

30

18

10

176

26.50

Code
'

L
mm

'

6524

Round nose pliers, long

DIN ISO 5745, for bending wire loops and rings,


long, round, ground jaws, fine serrations on
gripping areas.

b
L3
T

65 24 7 160

65 24 8 160

'

Head

Handles

L3 W
D
b
mm mm mm mm

65 24 7 160 160

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

47 15.5 8.5

2.5

162

32.90

65 24 8 160 160

chrome plated

insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

47 15.5 8.5

2.5

156

26.80

Code
'

'

262

L
mm

6529

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form A (straight), half round,


long tapering, serrated jaws, with burner hole,
precision cutting edges for soft and hard wires,
induction hardened cutting edges, approx. 60 HRC.

h
L3

65 29 7 160

65 29 8 160

'

Code

L
mm

L3 W
D
h
b
mm mm mm mm mm

dip-coated insulation, DIN EN 60900, T AC/1000 V

51
73

16
17

9
9

3
3

2.5
2.5

174
226

36.80
44.60

insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

51
73

16
17

9
9

3
3

2.5
2.5

158
202

30.20
33.10

Head

Handles

65 29 7 160 160
65 29 7 200 200

chrome plated

65 29 8 160 160
65 29 8 200 200

chrome plated

'

'

6530

Snipe nose pliers with cutter (radio- or telephone pliers)

DIN ISO 5745, Form B, bent 45, half round,


long tapering, serrated jaws, with burner hole,
precision cutting edges for soft and hard wires,
induction hardened cutting edges, approx. 60 HRC.

L2

L3

65 30 7 160

65 30 8 160

'

Code
'

L
mm

Head

Handles

L2 L3 W
D
h
b
mm mm mm mm mm mm

R
g

65 30 7 160 160
65 30 7 200 200

chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V

24
28

55
76

16
17

9
9

3
2.5
3.5 3

185
230

45.20
50.50

65 30 8 160 160
65 30 8 200 200

chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

24
28

55
76

16
17

9
9

3
2.5
3.5 3

154
201

35.90
37.50

'

6533

Mechanics snipe nose pliers

half round, long tapering, serrated jaws.

h
L3

65 33 7 160

65 33 8 160

'

Code
'

L
mm

Head

L3
mm

Handles

W
mm

D
mm

h
mm

b
mm

R
g

65 33 7 160 160

chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V

50

15

2.5

147

33.20

65 33 8 160 160

chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 50

15

2.5

160

27.00

'

Side cutters N

6600

DIN ISO 5749, Form B, precision cutting edges for


all wires incl. piano wire, high quality alloy steel,
bevelled cutting edges induction hardened,
approx. 63 HRC.

h
e

66 00 7 160

66 00 8 160

'

Code
'

L
mm

Head

Handles

e
h
b
mm mm mm

R
g

66 00 7 145 140
66 00 7 160 160
66 00 7 180 180

chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V

19
20
23.5 20
25.5 25

8.2
9
9.5

3
2.5 1.8 1.6
3
2.8 2
1.6
3.8 3
2.5 2

155
215
270

28.70
30.20
33.60

66 00 8 145 140
66 00 8 160 160
66 00 8 180 180

chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 19


20
23.5 20
25.5 25

8.2
9
9.5

3
2.5 1.8 1.6
3
2.8 2
1.6
3.8 3
2.5 2

149
190
249

24.60
26.10
29.30

'

q Cutting capacity in mm for soft wire


w Cutting capacity in mm for medium hard wire
e Cutting capacity in mm for hard wire
r Cutting capacity in mm for piano wire
'

263

Pliers
Heavy duty side cutters N

6602

DIN ISO 5749, Form A, precision cutting edges for


all wires incl. piano wire, high quality alloy steel,
bevelled cutting edges induction hardened,
approx. 63 HRC.

h
e

66 02 7 200

66 02 8 200

'

Code
'

L
mm

Head

e
h
mm mm

Handles

b
mm q

R
g

66 02 7 160 160
66 02 7 200 200
66 02 7 250 250

chrome plated

dip-coated insulation, DIN EN 60900, T AC/1000 V

25.5 25
9.5
31
28
11.5
32
29.5 12

4
4
4

3.4 2.5
4
3
4
3.5

2
220
2.5 325
3
475

39.10
48.50
53.50

66 02 8 160 160
66 02 8 180 180
66 02 8 200 200

chrome plated

insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V 25.5 25


9.5
27.5 26.5 10.5
31
28
11.5

4
4
4

3.4 2.5
3.8 2.7
4
3

2
210
2.2 250
2.5 305

32.80
40.80
42.60

'

q Cutting capacity in mm for soft wire


e Cutting capacity in mm for hard wire

w Cutting capacity in mm for medium hard wire


r Cutting capacity in mm for piano wire

'

6622

Wire stripping pliers

with adjustment screw to cut insulation only on


wire or cable, max. 5 mm O 10 mm2 conductor
cross-section.

66 22 7 160

66 22 8 160

'

Code
'

L
mm

Head

Handles

66 22 7 160 160

chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V

180

45.10

66 22 8 160 160

chrome plated insulated, with plastic sleeves, DIN EN 60900, T AC/1000 V

168

39.10

'

6623

Wire stripping pliers

for wires from 0.5 to 5 mm O, self adjusting,


cutter hole for cutting wire or stranded wires up
to 5 mm O, special steel.
66 23 7 160

66 23 8 160

'

Code
'

L
mm

Head

Handles

66 23 7 160 160

chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V

214

57.50

66 23 8 160 160

chrome plated insulated, with plastic sleeves, DIN EN 60900 T AC/1000 V

184

55.50

'

Replacement stripping knives (1 pair) for No 6623


'

Code

'

69 23 0 001

11

'

6630

16.50

Cable shear

for copper and light alloy cables. Easy, single


handed operation. Special cutter geometry to
avoid pressure marks and frayed ends,
adjustable joint, anti-squeeze protection,
not suitable for steel or armoured cables.

'

Code
'

L
mm

66 30 7 220 220
'

Head

Handles

chrome plated dip-coated insulation, DIN EN 60900, T AC/1000 V

u cutting capacity in mm for single wire Al-/Cu-Cable


o cutting capacity in mm2 for thin wire Al-/Cu-Cable
2

'

264

16

35

70

i cutting capacity in mm for multiple wire Al-/Cu-Cable


2

R
g

380

73.00

Plastic side-cutters
6670

6673

Plastic side-cutters L

for plastic injection mouldings, with raised cutting edges, 20 angled, with
no bevel to enable flush trimming of sprues and burrs, with spring-loaded
opening, induction-hardened cutting edges.

Plastic side-cutter L

for plastic injection mouldings, with particularly narrow, straight cutting


edges, with no bevel to enable flush trimming of sprues and burrs, only
for thin sprues made of soft thermoplastic, with spring-loaded opening,
induction-hardened cutting edges.

h
e

'

Code
'

'

L
mm Head

66 70 6 120 120 polished


'

6671

Handles
dip-coated
with sure-grip
surface

e
h
b R
mm mm mm g
13

11

L
mm Head

66 73 6 130 130 polished


66 73 6 145 145
66 73 6 160 160

'

Code

'

6674

56 23.40

Handles

e
h
b R
mm mm mm g

dip-coated
with sure-grip
surface

22
23
28

17 8.5 107 20.90


18 9.5 119 22.20
18 10.5 165 22.80

Plastic side-cutter L

for plastic injection mouldings, with convex cutting edge,


with no bevel to enable flush trimming of sprues and burrs,
with spring-loaded opening, induction-hardened cutting edges.

Plastic side-cutter L

for plastic injection mouldings, with particularly narrow, straight cutting


edges, 45 angled, with no bevel to enable flush trimming of sprues and
burrs, only for thin sprues made of soft thermoplastic, with spring-loaded
opening, induction-hardened cutting edges.

'

h
e

Code
'

L
mm Head

66 74 6 160 160 polished


'

'

Code
'

L
mm Head

66 71 6 120 120 polished


'

Handles
dip-coated
with sure-grip
surface

6676

e
h
b R
mm mm mm g
12

11

56 23.40

Handles
dip-coated
with sure-grip
surface

e
h
b R
mm mm mm g
28

20

11 162 22.80

Plastic side-cutters L

For plastic injection mouldings, with straight cutting edges, 30 angled,


with no bevel to enable flush trimming of sprues and burrs,
with spring-loaded opening, induction-hardened cutting edges.
b

6672

Plastic side-cutters L

for plastic injection mouldings, with straight cutting edges, 20 angled,


with no bevel to enable flush trimming of sprues and burrs,
with spring-loaded opening, induction-hardened cutting edges.

'

h
e

Code
'

L
mm Head

66 76 6 130 130 polished


66 76 6 145 145
66 76 6 160 160
'

'

Code
'

L
mm Head

66 72 6 130 130 polished


66 72 6 145 145
66 72 6 160 160
'

Handles

e
h
b R
mm mm mm g

dip-coated
with sure-grip
surface

22
25
28

16
17
18

9 107 21.60
10 120 22.00
10 161 22.30

6677

Handles

e
h
b R
mm mm mm g

dip-coated
with sure-grip
surface

19 16.5 8.5 105 22.70


21 18.5 9.5 125 24.30
28 20 11 182 24.70

Plastic side-cutter L

for plastic injection mouldings, with straight cutting edges,


90 angled, with no bevel to enable flush trimming of sprues and burrs,
with spring-loaded opening, induction-hardened cutting edges.
b

h
e

'

Code
'

L
mm Head

66 77 6 160 160 polished


'

Handles
dip-coated
with sure-grip
surface

e
h
b R
mm mm mm g
25

21

10 166 24.00

265

STAHLWILLE
Certified to DIN EN ISO 9001.

After STAHLWILLE was certied, as one of the very rst companies


back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also
certied to DIN EN ISO 9001 in 1992.

Pipe cutters, Miscellaneous tools

Pipe cutters, Miscellaneous tools

Original STAHLWILLE pipe and tube tools

These extremely robust pipe cutters guarantee accurate cutting without the danger of the cut
running off at an angle. Pipes can be directly passed on to the next processing stage.
EXPRESS Pipe Cutter No 150
Ideal for pipes made of steel, copper, brass, light alloy and hard plastics. This tool is available
in two sizes to cover outer diameters from 6 to 63 mm.
Essential product advantages when cutting pipes with STAHLWILLE pipe cutters:
Straight-line cutting
STAHLWILLE EXPRESS pipe cutters ensure a perfectly perpendicular cut. The broad support
rolls ensure that the cutting wheels are accurately guided throughout the cut. In this way, the
cut cannot run off at an angle on the pipe surface or enter the pipe at a tilted angle.
The robust drop forged upper-jaw section with its reinforced cutter-wheel guides prevents
spiral cuts.
Deburring and chamfering
The wide guide rolls flatten the burr created during the cutting process back into the material.
Separate deburring is not required. The cut-to-length pipe is automatically chamfered and can
be passed directly to the next processing step. The cut edge is angled in accordance with the
cutting wheel geometry.
Universally applicable Work on pipes in situ
STAHLWILLE EXPRESS pipe cutters can also be equipped with three cutting wheels. This
enables extremely efficient work on pipes in situ involving only a small angle of movement.

Pin for wheels and rolls

4
2

Cutting wheels for steel,


non-ferrous metal and plastic
pipes

268

Guide rolls for pipe cutters

Additional rings for versions

with three cutting wheels

METAL Pipe Cutter No 153


This light-weight, extremely convenient tool is specially
suitable for cutting tubes made of copper, brass, light alloy
or hard plastics and for thin-walled steel tubes with outer
diameters of from 3 to 35 mm and maximum cutting depths
of 2.5 mm. The integrated internal three-bladed cutter in
the handle removes burrs.

Midget tube cutter No 155


For pipes and tubes made of copper, brass, light alloy, hard
plastics and for thin-walled steel tubes with outer diameters
of from 3 to 16 mm where the maximum cutting depth
is 2.0 mm we recommend this extremely compact and
accurate tube cutter.

Chain Pipe Cutter No 157


Special pipe cutter, infinitely variable, with rotating handle,
also for cutting stainless steel pipes with wall thicknesses
of up to 1.8 mm and outer diameters of from 25 to 75 mm.
Chain lengths up to 270 mm.

Plastic pipe shears No 158


Low force needed thanks to optimised force transmission.
High cutting force thanks to Teflon coated blade.
Cutter body made of die-cast magnesium. Light but robust.

Single flaring cone D

STAHLWILLE cutting wheels for steel pipes


Especially high-grade, wear-resistant steel enables
extraordinarily high cutting force. The cutting wheels are
made of very tough special steel which guarantees long

Double flaring cone E

service lifetimes.

STAHLWILLE Double Flaring Tools No 165N

Double flaring cone F

Double Flaring Tools are used for making permanent


connections between pressurised pipes. DIN standard double
flares in accordance with DIN 74234 can be made with this
convenient easy-to-use and tough tool made by STAHLWILLE
to create safe connections (e.g. in car brake leads) without the
need for special skills. Simply clamp the tool in the vice and
it is ready for use. This tool guarantees rapid, safe processing

Double flaring cone


F 180

of seamless drawn and double-walled rolled pipes (Bundy)


with wall thicknesses of 0.7 or 1.0 mm with a single flaring
bit.
STAHLWILLE flaring tools
simple to use and guaranteed
optimum results.

Various DIN
standard single
and double flares
easily and quickly
produced using the
STAHLWILLE double
flaring tool.

269

Pipe cutters, Miscellaneous tools


150

EXPRESS pipe cutters

157

with one cutting wheel and


two guide rollers; for steel,
copper, brass, aluminium and
hard plastic tubes.

Chain pipe cutter

infinitely adjustable, with twist


handle, also suitable for special
steel pipes up to 1.8 mm wall
thickness, chain length 270 mm.

'

Code

size

60 02 00 01
60 07 00 02
60 12 00 01
60 12 00 02

1)
2 1)
1/3 2)
2/3 2)

'

"

1/81 1/4
1/82
1/81 1/4
1/82

'

mm

Cutting depth R
max. mm
g S

mm

332
350
332
350

643
1063
643
1063

4.5
7
4.5
7

1220
2191
1140
2004

1
1
1
1

'

116.00
115.00
132.00
132.00

) with wide guide rollers


) with three cutting wheels

mm

Cutting depth
max. mm

R
g

2575

705

Code
'

60 11 00 01
'

K157

Chain

'

2
'

Code

183

'

153

122.00

69 13 00 01

METAL pipe cutter

'

for use on copper, brass,


light alloy, PVC and thin walled
steel tubes, with deburring tool
(3 cutting edges) inside handle,
forged, chrome plated.

90.50

Guide rollers
for pipe cutters.

'

Code

"

mm

Cutting depth
max. mm

R
g

1/81 3/8

335

2.5

356

'

60 01 00 00
'

155

'

69.00

Code

No

for pipe
cutter

mm

b
mm

R
g

69 02 01 07
69 07 02 02
69 02 03 02
69 01 00 02

RL 1500/1
RL 1500/2
RL 150/3/4
RL 153

150/1
150151/2
150151/3 + 4
153

23
28
33
12

21.5
27.5
19
12

62
117
230
10

2
5
5
5

'

Small bore pipe cutter

for use on copper,


brass, light alloy,
PVC and thin walled
steel tubes.

'

8.70
9.45
10.90
6.30

Spindles
for wheels and guide rollers.

'

Code

"

'

mm

1/85/8

60 07 00 01
'

SR150

Cutting depth
max. mm

316

'

102

25.80

Cutting wheels

Code

No

69 02 01 04
69 02 01 03
69 07 02 03
69 07 02 04

BL 150/1
BZ 1500/1
BZ 1500/2
BL 1500/2

69 02 03 03
69 02 03 04
69 01 00 03
69 01 00 04

BZ 150/3/4 x
BL 150/4N x 3)
BZ 153
BL 153
x

'

for steel pipes.

'

'

Code

size

for pipe
cutter

mm

b
mm

R
g

69 02 01 01
69 02 02 01
69 02 03 01

1
2
3/4

150/1
150/2
150/3 + 4

25
32
41

14
19
19

14
28
38

10
10
10

'

'

10.80
10.50
18.60

Cutting wheels

for pipe
cutter

mm

b
mm

R
g

69 01 00 01

153

20

10

'

'

mm

b
mm

R
g

69 11 00 01

155

20

10

'

'

270

7.5
7.5
9
9

20 1
14 10
23 10
19 10

3.80
3.80
3.80
3.80

150151/3 + 4
150/4
153
153

36
40
18.5
13

9 34 10
9 21 1
4
2 10
4.75 2 1

3.80
3.60
3.80
3.80

'

Cutting wheels
for pipe
cutter

29
38.5
46
38

Spacing washers

Code

size

for pipe
cutter

mm

b
mm

R
g

68 02 01 01
68 02 02 01
68 02 03 01

1
2
4

150/1
14
150/2, 151/2 16
150/4 *)
18

3.9
4.45
9.5

8
8
18

6
6
1

10.10

'

Code

150/1
150/1
150151/2
150151/2

'

'

SR155

x 2)
x

L O R
mm mm g S

When required to fit pipe cutters No 150/1,


150/2 or No 150/4 with 3 cutting wheels
(to work in confined spaces),
a total of 4 spacing washers is required.
Simply exchange the 2 guide rollers for 2 cutting wheels
No SR150 with 2 spacing washers to each.

'

Code

x 1)

for pipe
cutter

BL = wheel bolt
BZ = roller bolt
1
) wheel- and roller bolt for 150/1 until 1985, wheel bolt for 150/1 from
1986
2
) roller bolt for 150/1 from 1986
3
) wheel bolt for 150/4 from 2009

RI 1500
SR153

wheelbolt rollerbolt

'

*) For 150/4 from 2009


'

6.25

2.70
2.90
2.55

158

Plastic pipe shears

1650N

for plastic pipes made of PE, PP, PB,


PE-X, MLP/MSR, VPE, CPVC, PVC,
PVDF and for dip-coated aluminium
tubes.
1 low force needed thanks to
optimised force transmission
1 high cutting force thanks to Teflon coated blade
1 rapid blade changing without tools
1 size 42 with ratchet function and single-handed rapid blade retraction
1 Cutter body made of die-cast magnesium. Light but robust.
'

Code

mm

O
"

L
mm

R
g

60 12 00 26
60 12 00 35
60 12 00 42

26
35
42

1
1 3/8
1 5/8

205
225
245

235
276
441

1
1
1

'

'

KL158

'

Code
'

68 03 10 01

4.75; 5; 6; 8; 9; 10 mm; 3/16; 1/4; 5/16; 3/8"

'

36.70
48.30
63.50

Clamping blocks

1 pair

1650K

198

83.50

Clamping blocks

1 pair, for dip-coated brake leads.

Spare blades

'

Code

for No

69 12 00 26
69 12 00 35
69 12 00 42

158-26
158-35
158-42

'

'

'

43
60
83

1
1
1

13.90
21.70
25.70

Code
'

68 03 00 03

5; 6 mm

'

1651

Double flaring tool

234

70.50

Flaring cones

This simple-to-use STAHLWILLE


Double flaring tool will form accurate
45 side of Clamping blocks to face flares (to DIN 74234) on seamless
spindle. Replace Flaring cone with drawn- and double walled (BUNDY)
tubes.
Thrust piece.

'

Clamped in a vice, the tool is instantly


ready for use. Flaring and Pressure
Cones are quickly changed.

45 side of Clamping blocks to face


spindle. Pre-form with Flaring cone,
The robust construction
finish with Forming cone.

size

mm

R
g

68 04 07 08
68 04 09 10

6+8 mm+1/4+5/16"
9+10 mm+3/8"

8
10

56
56

1
1

'

of the tool, plus the shape of Flaring


cones, enables single cone flaring on
tubes of 0.7 or 1.0 mm wall
thickness.

Code
'

1652N

22.80
22.80

Thrust piece/flaring cone

45; 4.75/5 mm+3/16",


for Double flaring tool No 165N.

45 side of Clamping blocks to face Tubing is held horizontally by 25 mm


spindle. Form with Flaring cone.

wide Clamping blocks.


This is important when endless tubing
is used. A distance pin controls length
of tube required for flaring.

F180

'

Code
'

68 05 10 01
'

By using the 90 sides of Clamping


block, Flare "F" receives a flat collar.

1655N
165N

R
g

4.75/5 mm + 3/16"

55

mm

22.80

Flaring spindle

for Double flaring tool No 165N.

Double flaring tool

with
1 pair of Clamping blocks No 1650N,
2 Flaring cones No 1651 and
1 Thrust piece/flaring cone No 1652N.

'

Code
'

69 10 10 02
'

1656N

54

28.20

Clamping screw

for Double flaring tool No 165N.

'

'

Code
'

63 03 10 00
'

G
4.75; 5; 6; 8; 9; 10 mm;

3/16; 1/4; 5/16; 3/8"

1420

S
1 446.00

Code
'

69 10 10 03
'

R
g

102

18.40
271

Pipe cutters, Miscellaneous tools


10940

Rubber composition hammers

10956R

DIN 5128, with two plane faces.

Spare nylon heads

these are lightly heated and then tapped into position.

'

L2
L1

mm

R
g

79 05 00 27
79 05 00 32
79 05 00 35
79 05 00 40

27
32
35
40

10
17
23
28

10
10
10
10

2.25
3.30
4.10
5.05

79 05 00 50
79 05 00 60

50
60

52
83

10
10

9.05
12.00

'

'

Code

mm

L1
mm

L2
mm

R
g

70 14 00 01
70 14 00 02
70 14 00 03
70 14 00 04

55
65
75
90

320
350
350
380

90
115
130
140

317
527
780
1190

2
2
2
2

'

Code

'

10955

5.70
7.40
11.90
17.80

'

10957

Plastic hammers

the hollow head is partially filled


with steel shot which adds to the
weight, prevents recoil;
with interchangeable heads made
of medium-hard polyurethane
and with a hickory handle.

Plastic hammers

with interchangeable heads of


impact resisting cellulose acetate
and ash handles.

'

'

Code

mm

L1
mm

L2
mm

R
g

70 16 00 27
70 16 00 32
70 16 00 35
70 16 00 40

27
32
35
40

265
280
290
320

90
100
105
110

215
325
400
550

6
6
2
2

9.95
13.20
15.80
18.90

70 16 00 50

50

340

115

860

28.90

'

'

10955R

L2
mm

R
g

70 19 00 25
70 19 00 30
70 19 00 35
70 19 00 40

25
30
35
40

320
350
355
375

108
115
118
125

320
460
580
760

6
6
6
2

39.70
43.20
47.50
55.50

70 19 00 50
70 19 00 60

50
60

385
420

135
165

1250
1900

2
2

69.50
133.00

'

Spare plastic heads

Code

mm

R
g

79 09 00 25
79 09 00 30
79 09 00 35
79 09 00 40

25
30
35
40

14
19
26
38

10
10
10
10

5.85
7.65
9.40
11.50

79 09 00 50
79 09 00 60

50
60

72
118

10
10

16.60
27.10

'

mm

R
g

79 04 00 27
79 04 00 32
79 04 00 35
79 04 00 40

27
32
35
40

13
21
28
37

5
10
10
10

1.25
1.80
2.35
2.80

79 04 00 50

50

65

10

4.90

10956

L1
mm

'

Code

'

10957R

Spare plastic heads

'

mm

'

of impact resisting cellulose acetate, these are lightly heated and then
tapped into position.

'

Code

'

10958

Embossing hammer

aluminium, cylindrical,
with hickory handle.

Nylon hammers

with interchangeable heads


of shockproof nylon vestamid
and hickory handles.
'

'

Code

mm

L1
mm

L2
mm

R
g

70 17 10 27
70 17 10 32
70 17 10 35
70 17 10 40

27
32
35
40

265
280
290
320

90
100
105
110

232
336
413
546

6
6
2
2

16.70
20.70
24.10
29.40

70 17 10 50
70 17 10 60

50
60

340
380

115
135

898
1339

2
2

43.50
58.50

'

'

Code

mm

L1
mm

L2
mm

R
g

70 24 00 40

40

340

155

648

'

'

10960

34.70

Engineers hammers

with ash handles, DIN 1041.

L2
L1
'

L1
mm

L2
mm

R
g

100
200
300
500

260
280
300
320

82
95
105
118

148
254
396
614

6
6
6
6

12.40
13.70
16.00
17.50

70 11 00 06
800
70 11 00 03 1000
70 11 00 07 1500
70 11 00 08 2000

350
360
380
400

130
135
145
155

951
1132
1615
2285

2
2
2
2

25.90
27.70
35.70
47.10

Code
'

70 11 00 05
70 11 00 01
70 11 00 04
70 11 00 02
1

'

272

10970

Engineers hammers

101*

with ash handles.

Ribbed cross-cut chisel

of tough tempered special steel,


chrome plated.
'

size

L
mm

b
mm

R
g

150

143

10

'

L2
mm

R
g

67
82
93
99

176
320
454
575

6
6
6
6

17.10
19.60
21.00
21.90

* to be discontinued

118
126

790
1044

2
2

29.40
33.60

DIN 6453, chrome vanadium


steel, lacquered silver.

Code

lb.

70 12 00 01
70 12 00 05
70 12 00 06
70 12 00 02

1/4
1/2
3/4

270
290
310
320

70 12 00 04
70 12 00 03

1 1/2
2

350
380

'

'

Code

L1
mm

'

70 03 00 06
'

ES 10956/10960/2

'

102

Cold chisels

'

Code

size

L
mm

b
mm

R
g

70 02 00 02
70 02 00 03
70 02 00 04
70 02 00 05

125
150
175
200

125
150
175
200

15
18
21
24

96
172
269
379

10
10
10
5

8.65
10.50
13.70
16.00

70 02 00 07
70 02 00 08

250
300

250
300

25
26

479
591

5
5

21.70
27.00

'

175 x 350 x 45 mm, 2 pieces

'

'

Code

'

96 83 81 25

103

1130

'

No 10956

O 35 mm

No 10960

500 g

'

11.30

50.25

Cross-cut chisels

DIN 6451, flat, chrome vanadium


steel, lacquered silver.
'

'

83 81 20 25
'

Empty tray

114

8.65

ES 10956/10970/2

Code

size

L
mm

b
mm

R
g

70 04 00 03
70 04 00 04
70 04 00 05

150
175
200

150
175
200

16
17
18

147
239
340

10
10
5

'

'

110

10.80
13.70
17.10

Grooving chisel

flat, chrome vanadium steel,


lacquered silver.
'

175 x 350 x 45 mm, 2 pieces


'

'

96 83 81 31
No 10956

O 35 mm

No 10970

1 lb.

'

'

83 81 20 25
'

b
mm

R
g

70 08 00 01

240

26

292

'

1075

'

L
mm

'

Code

Code

54.65

112

15.20

Grooving chisel

as No 110,
but with finger protector.

Empty tray

114

8.65

8
100

Ribbed cold chisels

of tough tempered special steel,


chrome plated.

'

Code

L
mm

b
mm

R
g

70 08 00 02

240

26

411

'

'

'

b
mm

Code

size

L
mm

70 01 00 05
70 01 00 06
70 01 00 08
70 01 00 10

5*
6
8
10

125
150
200
250

18
20
26
30

93
165
305
507

10
10
5
5

9.30
10.90
15.90
20.70

70 01 00 12

12

300

35

807

29.30

'

Finger protector

for Cold Chisels No 102 and Cross-cut chisels No 103 from


200 mm onward, for Grooving chisel No 110, shaft section 23 x 13 mm.
'

'

* to be discontinued
'

112/1

18.10

Code
'

79 16 00 01
'

R
g

101

5.05

273

Pipe cutters, Miscellaneous tools


104

Drift pins

ES 102/108/109/4

DIN 6458, octagonal,


chrome vanadium, lacquered silver.
'

Code

size

70 06 00 07
70 06 00 10
70 06 00 02
70 06 00 08

120 x 2
120 x 3
120 x 4
120 x 5

'

70 06 00 03
70 06 00 09

mm

mm

L
mm

R
g

2
3
4
5

10
10
10
10

120
120
120
120

60
60
62
64

10
10
10
10

120 x 6
120 x 8

6
8

'

10
12

120
120

66
68

10
10

5.95
5.95
5.95
6.25
6.25
6.25

175 x 350 x 30 mm, 4 pieces


'

Code

'

96 83 81 23
'

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

'

105

Centre punches

'

DIN 7250, octagonal,


chrome vanadium, lacquered silver.

'

83 81 20 27
'

Empty tray

555

47.85

115

8.65

'

Code

size

mm

L
mm

R
g

70 05 00 01
70 05 00 05
70 05 00 02

100 x 10
120 x 10
120 x 12

10
10
12

100
120
120

52
63
90

10
10
10

'

'

108

ES 102/105/108/8
5.00
5.65
6.15

Parallel pin punches


175 x 350 x 33 mm, 8 pieces

DIN 6450, octagonal,


chrome vanadium, lacquered silver.

'

R
g

Code

size

mm

mm

70 07 11 52
70 07 00 13
70 07 00 01
70 07 00 02

115 x 2
125 x 3
150 x 2.5
150 x 3

2
3
2.5
3

8
8
10
10

115
125
150
150

30
35
65
62

10
10
10
10

7.05
5.95
5.85
5.80

70 07 00 03
70 07 00 04
70 07 00 05
70 07 00 06

150 x 4
150 x 5
150 x 6
150 x 8

4
5
6
8

10
10
10
10

150
150
150
150

64
67
72
81

10
10
10
10

5.75
5.80
6.10
6.10

70 07 00 09
70 07 00 10
70 07 00 12
70 07 00 08

175 x 3
175 x 4 1)
175 x 6
200 x 8

3
4
6
8

10
10
10
12

175
175
175
200

57
64
69
141

10
10
10
10

6.55
6.55
10.50
8.00

70 07 00 11

200 x 10

10

12

200

159

10

7.80

'

96 83 81 24

) for use on Mercedes-Benz (retaining pins of disc brake pads)


x diameter of tip
w size of handle, octagon
'

175 mm

No 105

120 x 12 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

'

'

'

102-5/6

Empty tray

114

8.65

Sets: Chisels, pins, punches

6 pieces
content: 1 each
No 106/125 mm
No 106/150 mm
No 107/125 mm
No 104/120 x 2; 120 x 4 mm
No 105/120 x 10 mm
D = in plastic stand
Pc = in plastic wallet

'

Code

No

98 81 22 01
98 81 22 02

102-5/6 D
102-5/6 Pc

'

'

Code

size

mm

mm

L
mm

R
g

70 09 00 01
70 09 00 02
70 09 00 03
70 09 00 04

1
2
3
4

0.9
1.4
1.8
2.4

5
5.5
6
7

80
82
86
95

7
12
12
18

10
10
10
10

9.20
9.30
8.90
8.90

70 09 00 05
70 09 00 06
70 09 00 07
70 09 00 08

5
6
7
8*

2.8
3.4
3.9
5.9

97
100
100
103

19
25
27
47

10
10
10
10

8.90
8.90
8.90
7.05

No 102
'

83 81 20 36

63.90

Pin punches

with guide bush.

'

900

'

109

'

L
mm

'

Code

'

'

v diameter of tip
x diameter of handle

7
8
9
10

'

104-5/6D

R
g

445
426

1
5

36.00
36.00

Set: Drift pins, centre punches

6 pieces
Content: 1 each
No 104/120 x 2; 120 x 3; 120 x 4; 120 x 5;
120 x 6 mm
No 105/120 x 10 mm
in plastic stand

* without guide bush

'

'

Code
'

96 70 06 01
'

274

R
g

417

36.50

105-8/6K

Pin punch-/centre punch set

TCS 102108/10957/10960 MF

6 pieces
in transparent plastic
container stand.
Content: 1 each
No 108/150 x 2.5; 150 x 3; 150 x 4;
150 x 5; 150 x 6 mm;
DIN 6450/ Form C
No 105/120 x 10 mm;
DIN 7250

530 x 350 x 40 mm, 12 pieces


'

Code

'

96 70 07 11

'

96 83 03 55

483

'

Code

'

3343

'

34.95

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 40 mm

No 10960

500; 800 g

'

'

108/6

Sets: Parallel pin punches

'

6 pieces
Content: 1 each
No 108/150 x 2.5; 150 x 3; 150 x 4;
150 x 5; 150 x 6; 150 x 8 mm
D = in plastic stand
Pc = in plastic wallet

230.40

No 102

'

'

'

No 12718
'
'

Code

No

96 70 07 01
96 70 07 02

108/6 D
108/6 Pc

'

'

450
424

1
5

TCS 102108/10957/12718/13

35.40
35.40

TCS 102109/10956/10960/6

530 x 350 x 40 mm, 13 pieces


'

Code

'

175 x 350 x 40 mm, 6 pieces

96 83 02 26

3730

'

'

Code
96 83 81 81

1500

'

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8; 200 x 8 mm

No 10957

O 40 mm

No 10960

500; 800 g

'

'

100.50

'

'

No 10956
'

O 35 mm
'

No 10960

500 g

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

'

'

'

No 109

'

'

No 12718

size 6; 100 x 3.4 mm

'

'

TCS 102108/10960/10

TCS 102-108/11

175 x 350 x 33 mm, 11 pieces

175 x 350 x 40 mm, 10 pieces


'

'

Code
'

96 83 87 54

1665

'

No 102

150; 200; 250 mm

No 105

120 x 10; 120 x 12 mm

'

No 108
'

Code

'

236.70

No 102

'

115.10

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

96 83 03 61

1569

'

200 mm

No 105

120 x 12 mm

No 108

115 x 2; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 175 x 4; 200 x 8 mm

No 10960

500 g

'

'

'

'

109.30

No 102

275

Pipe cutters, Miscellaneous tools


TCS 102108/10957/10960/13

TCS 102108/10956/10960/18

530 x 350 x 55 mm, 18 pieces

530 x 350 x 60 mm, 13 pieces

'

'

Code
'

96 83 01 77

5540

'

No 102

266.00

96 83 06 20

'

No 105

120 x 12 mm

'

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

'

No 10957

O 50 mm

No 10960

500; 800; 1000 g

'

'

264.70

No 102

150 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

No 10956

O 50 mm

No 10960

300; 500 g

'

175 mm

'

3653

'

No 103
'

'

200; 300 mm

'

Code

'

'

'

No 10356

TCS 102108/10957/10960/16

'

No 10670

285 mm

No 10672

20 x 315 mm

'

'

No 12374
'

No 12900N
'

No 12965N
'

530 x 350 x 45 mm, 16 pieces


'

10670

Code

'

96 83 06 09

3715

'

Three square engineers scrapers

special steel.
285.00
'

No 102
'

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

'

'

'

No 10957
'

No 10960
'

Code

L
mm

R
g

72 06 01 01
72 06 01 03
72 06 01 04
72 06 01 05

215
265
285
310

106
124
140
152

5
5
5
5

'

'

O 40 mm
500 g

No 12373

10672

Flat engineers scrapers

special steel.
'

'

No 12600
'

500 g

Code
'

No 12718

72 05 01 04
72 05 01 05

'

mm
20 x 315
25 x 365

'

No 12931
'

10676

No 65 64 2 250
No 39 cars

R
g

227
367

5
5

13.00
15.50

3m

'

'

10.70
11.30
12.00
13.00

400 mm

Three square engineers bearing scraper

special steel.
'

Code
'

72 08 01 03
'

276

mm
85 x 12 x 315

R
g

160

12.50

12025

Engineers file, round

12053

Hacksaw frame

DIN 8349, cut 2


'

Code

L
mm

R
g

72 12 01 00

210

118

'

'

13.80
'

12030

Engineers file, half round

Code

L
mm

R
g

72 21 00 02

252

159

'

DIN 8349, cut 2

'

12.20

'

Code

L
mm

R
g

72 13 01 00

260

317

'

'

12053R
25.80

Spare hacksaw blades for No 12053

6 pieces, Chrome Alloy Tool Steel, 32 teeth per inch.


'

12035

Engineers file, three-square

Code

L
mm

R
g

79 18 00 02

158

23

'

DIN 8349, cut 2

'

3.30

'

Code

L
mm

R
g

72 14 01 00

210

201

'

'

12036

ES 1067013110/11
18.10

Engineers file, hand

DIN 8349, cut 2


'

Code

L
mm

R
g

72 17 01 02

260

339

'

'

530 x 350 x 35 mm, 11 pieces


'

18.90

Code

'

96 83 81 73

12200

2120

'

Hand vice

No 10670

265 mm

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

465 mm

'

forged C 35,
width of jaws 48 mm.

'

'

'

'

'

Code
'

71 20 00 00
'

L
mm
145

R
g

673

S
1

'

37.50

172.95

No 12320
'

No 12321
'

12050

Tubular hacksaw

No 12377
'

with blade size 300 mm/12".

No 12931

3m

No 13110

300 mm

'

'

83 81 20 88

'

'

Code

L
mm

R
g

72 21 00 00

465

490

'

'

Empty tray

301

23.70

8
21.50

Spare hacksaw blades for No 12050


10 pieces, H.S. Steel, 24 teeth per inch.
'

Code

L
mm

R
g

79 18 00 01

300

174

'

'

29.30

277

Pipe cutters, Miscellaneous tools


TCS 1202513110/11

12000

Universal thread restorers

suitable for inside and


outside threads.
'

Code

size

L
mm

R
g

72 10 00 04
72 10 00 03
72 10 00 02

ISO
SAE
WW

230
230
230

119
118
122

10
10
10

'

530 x 350 x 35 mm, 11 pieces

'

| ISO |
Pitch
metr.
mm
thread

'

Code

'

96 83 87 59

2070

'

No 12025

210 mm

No 12030

260 mm

No 12035

210 mm

No 12036

260 mm

No 12050

300 mm

'

'

'

'

'

200.00

No 12320

12665

'

No 12718
'

No 12931

3/16

24
20
18
16
14
12
11
10

7/32

1/4
5/16
3/8
7/16
1/2

+ 9/16
+ 11/16
3/4 + 13/16
5/8

24
20
18
16
14
13
12
11

Screw pitch gauge

0.25 to 6 mm and 4 to 62 t.p.i.


(metric/Whitworth threads).

'

'

'

5
6+7
8+9
10 + 11
12
14 + 16
18, 20, 22
24 + 27

'

No 12321

| Ww |
SAE/USS
threads
Whitworth threads
per inch
thread
per inch

'

0.80
1.00
1.25
1.50
1.75
2.00
2.50
3.00

49.60
49.70
49.70

3m

No 12965N
'

No 13110
'

300 mm
'

905/25

Stud remover set

Code

size

77 27 00 03

52

'

M 5M 16, 3/16"5/8", 25 pieces,


in green plastic box.
Content:
5 HSS twist drills
sizes (3.2; 4.8; 6.4; 8; 8.7 mm)
5 Fluted Removal Pins
sizes 15 for threads M 5M 16
5 Splined Nuts, sizes 15
10 Drill Guides, sizes 110

'

900/6Pc

79

10

7.55

Screw EXTRACTOR set

in green plastic bag.

'

Code
'

96 71 30 25
'

555

127.00

'

906

Spare parts

Code

Content

96 71 01 01

1 each No 900 size 16

'

'

220

56.25

Removal pins and splined nuts, in pairs in plastic bags.

900

'

Code
'

71 31 00 01
71 31 00 02
71 31 00 03
71 31 00 04
1

size
1
2
3
4

71 31 00 05 5
'

for
threads

R
g

M5M6 3/161/4"
M7M8 1/45/16"
M10 3/8"
M12 7/16"

14
20
33
46

1
1
1
1

7.20
8.30
9.85
11.60

M14M16 1/29/16"

65

13.50

'

L recommend. R
mm Drill
g
S

3
3.4
4.9
7

1/8
9/64
3/16
9/32

49
54
59
65

Code

for
size bolts

71 01 00 01
71 01 00 02
71 01 00 03
71 01 00 04

1
2
3
4

M3M4 1/85/32"
M5M7 3/161/4"
M8 5/16"
M10M12 3/87/16"

71 01 00 05
71 01 00 06

5
6

M14M16 1/29/16" 9
M18M22 5/83/4'' 12

'

'

278

Screw EXTRACTOR

mm

"

23/64
31/64

2 mm 5/64"
3
3 mm 7/64"
6
5 mm 3/16" 10
6.4 mm 1/4" 20

10
10
10
5

6.55
8.05
8.05
9.65

88 8 mm 5/16" 48
95 12 mm 15/32" 92

5
5

10.10
12.30

904

Stud remover

12935N

1 Suitable for all sizes of studs from 612 mm.


1 Also suitable for percussion screwdriver use.
1 Will cope with rusted or scale-coated
screws with a minimum of 3 mm protruding.
Chuck: size 36 mm
Clamping screw: size 24 mm

Workshop micrometers

DIN 863, chrome plated.


1 With clamping ring and precision
ratchet knob
1 With insulating plates
1 Tungsten carbide anvil
1 Readings 0.01 mm

'

Code

R
g

3/8

420

"

'

71 34 00 00
'

161.00

'

Code

size

77 41 10 01
77 41 10 02
77 41 10 03
77 41 10 04

1
2
3
4

'

12615

Nut splitters

zinc plated, mechanical, for splitting


seized or overtightened nuts up to class 8.
Does not damage the threaded pin.
As the spindle is tightened, the nutsplitter
body has to be locked with an open-jaw
spanner to prevent it turning.
Cutting chisel made of high-grade alloy tool steel.

measuring range
mm

Pitch
mm

R
g

025
2550
5075
75100

0.5
0.5
0.5
0.5

297
395
601
809

1
1
1
1

'

13110

46.00
57.00
70.50
88.50

Steel rule

Metric-Inch scales, length 300 mm.

'

Code

size

for nuts
mm

R
g

71 25 00 11
71 25 00 12

1
2

1018
1927

193
386

1
1

'

'

70.50
72.50

'

Divisions
Top Edge "

Code
'

12900N

1/16, 1/32, 1/64

77 46 00 01

Vernier calliper

'

as per DIN 862,


vernier readings 1/20 mm and
1/128", stainless steel,
in plastic pouch.

Divisions
R
Lower Edge mm g

12915

0.5; 1

26

5.30

Ratchet tap holders

steel, chrome plated.

'

Code
'

77 37 10 01
'

12900/1N

measuring range
mm/"

R
g

150/6

185

40.70
'

Vernier calliper

Code

with a large digital display,


automatic shut-off,
switch for mm/inches, depth gauge,
RS232C interface, spare battery,
differential measurements by means
of 0 reset function, display accuracy 0.01 mm / 0.0005",
in plastic case.

'

77 39 00 01
77 39 00 02

'

77 37 10 02
'

12900/2N

Capacity
mm

DIN 1)

ISO 2)

L
mm

R
g

1
2

2.05.0
4.68

M38
M512

M16
85
M612 110

180
305

1
1

'

18.80
24.50

) for taps DIN


) for taps ISO

1
2
'

12800

'

Code

size

measuring range
mm/"

R
g

150/6

312

102.00

Set warding files

6 pieces, in Pc-wallet, DIN 7283,


Content:
1 file each, hand, flat, half round,
three square, square, round

Brake disc gauge

DIN 862, for measuring the thickness


of car and motorcycle brake discs in
situ, stainless steel, with locking
screw and trailing vernier scale
(1/10 mm), in plastic pouch.

'

Code

L
mm

R
g

72 23 00 01

100

111

'

'

19.50

'

Code
'

measuring range throat depth


mm
mm

77 37 10 03
'

12931

60

55

R
g

233

13100
115.00

Tape measure

Set of needle files

6 pieces, in plastic wallet,


Content:
1 file each,round, half round,
three square, square, hand, flat

with tape lock. Metric-Inch scales.


'

'

Code

R
g

77 04 00 04

104

10

'

L
mm

R
g

96 72 28 01

140

46

'

L
m

'

Code
'

59.50

13.60
279

Pipe cutters, Miscellaneous tools


12932

Padlock

12322

Tungsten carbide scribing iron

straight type; sturdy shank with


tungsten carbide tip.
Can be reground.
Holder and clip.
'

'

Code
'

77 21 00 02
'

Code

L
mm

R
g

77 10 00 01

150

35

10

'

85

'

14.00

12374
12250

3.60

Wire brush

wood, steel wire dia. 0.35 mm.

Force feed oil can

metal container, brass pump.


Content:
500 ccm

'

Code

L
mm

Rows

77 09 00 00

290

'

'

12377

R
g

129

10

2.90

Wire brush

with brass coated steel bristles.

'

Code
'

77 01 00 01
'

270

'

24.80

Code

L
mm

R
g

77 09 00 10

270

140

24

'

'

12251

3.10

Plastic oil can


12378

Content:
250 ccm

File brush

'

Code

L
mm

R
g

77 25 00 00

260

74

'

'

13115

'

Code
'

77 11 00 02
'

4.65

Brass wire brush

for use on light alloys.

80

10.50
'

12320

Electricians cable knife

with stainless blade.

Code

L
mm

Rows

77 47 00 01

280

134

'

'

12481

7.20

Scraper

'

Code
'

Blade
mm

R
g

90

81

10

77 02 00 00
'

13.60
'

12321

Scribing iron

with knurled centre-section.


1 straight and 1 offset blade;
blades gunmetal finished.

L
mm

R
g

77 10 00 00

250

31

10

280

b
mm

R
g

77 07 00 00

212

60

65

10

'

Code
'

L
mm

'

'

'

Code

4.25

4.20

12600

Magnetic lifters

12921N

Telescopic mirrors

Loss of adhesion above 80C.


'

Code

mm

L
mm

R
g

77 40 10 30
77 40 10 40
77 40 10 50
77 40 10 60

30
40
50
60

265705
275715
285725
295735

108
112
135
150

1
1
1
1

'

'

Code
'

lifting power
g

77 26 00 27 270 1)
77 26 00 25
500
77 26 00 60 1800
77 26 02 00 3000
'

mm

L
mm

R
g

5
8
15
19

500
460
525
535

25
70
230
297

1
1
1
1

'

7.95
21.40
32.20
52.50

) Miniature magnetic lifter with tiny head, very powerful

1
'

12910

12921NR

Adjustable hook spanners

Replacement mirror for 12921N

'

Code

mm

R
g

79 40 10 30
79 40 10 40
79 40 10 50
79 40 10 60

30
40
50
60

10
15
20
27

1
1
1
1

'

for slotted nuts as per DIN 1810,


adjustable.

'

12923

'

44 01 00 01
44 01 00 02
44 01 00 03

size

mm

R
g

1
2
3

2042
4590
95165

90
245
686

5
5
5

'

12921M

'

Code
'

77 40 00 04

1 Unbreakable mirrors made of stainless steel (FOD)


1 No bolted joints (FOD)
1 Nylon frame with additional holders to prevent
loss of the mirror surface (FOD)
1 Rust-proof stainless steel
telescopic arm
1 Universal joint (180 action),
self-tensioning
1 Special plastic handle ensures a
firm grip and safe working,
resistant to chemicals

'

13120-1

size
1 1/4"/32 mm
1 3/4" x 2 3/4"/45 x 70 mm
2 1/4"/57 mm
1" x 2"/ 25 x 50 mm

'

12920N

L
mm

R
g

171699
178927
178921
178914

56
78
70
60

1
1
1
1

mm

O 32

y 45 x 70
O 57
5 25 x 50

S
1

46.70

Telescopic mirror

'

'

77 40 10 32
77 40 10 45
77 40 10 57
77 40 25 50

40

with light unit No 12923 (LED) and


batteries, for inspecting numerous
kinds of joints.
The concave mirror provides 5-times magnification.
With non-twisting, oval-section telescopic rod.

Code

mm

L
mm

R
g

77 48 02 02

55

310750

127

'

'

Light unit

28.90
31.30
55.50

Telescopic stainless steel mirror

Code

10.30
11.60
15.40
16.10

with LEDs, includes batteries,


can be used with telescopic mirrors
No 12920 and 12921.

'

Code

30.20
30.80
33.90
35.50

'

25.70
26.80
25.70
25.70

Telescopic mirror

with non-twisting,
oval-section telescopic rod.

13120N

82.50

Telescopic mirror

Illuminated (LED) and with batteries


(approx. 150 hours of light),
for inspecting numerous kinds of
joints.
The LED light source can be detached and used as a separate penlight.
The concave mirror provides 5-times magnification.
With non-twisting, oval-section telescopic rod.

'

Code

mm

L
mm

R
g

77 48 00 02

55

310750

235

'

Code
'

77 40 10 01
'

12920NR-1

mm

L
mm

R
g

65 x 43

310750

65

'

35.50

'

13120R

Replacement mirror for No 12920N

'

94.50

Replacement concave mirror for


No 13120N, No 13120-1

'

Code
'

79 40 10 01
'

R
g

43

S
1

Code
'

15.40

79 40 10 55
'

12920NR-2

R
g

43

16.60

Stainless steel replacement mirror for No 12920N

'

Code
'

79 40 10 02
'

R
g

43

10.70
281

Pipe cutters, Miscellaneous tools


12922E

Claw lifter

12965-1

'

Code
'

77 40 11 03
77 40 72 03

mm

L
mm

R
g

6
8

540
540

113
148

1
1

'

12941N

Self-retracting cutter

with ergonomic handle.

38.10
38.50

1 With automatic blade retraction


1 Spare blades can be stored inside
the handle
1 Blade changes without tools
1 With hanging hole
1 Ideally suited for cutting card, rubber, leather, wood etc.
1 Tool body made of cast zinc.

Soldering gun
'

230 V, 5060 Hz, 100 W.

Code

L
mm

R
g

77 62 10 02

174

200

'

'

12965R

9.25

Spare blades

5 pieces, for No 12965N, 12965-1.

'
'

Code

'

96 77 42 00

839

'

12941R/4

'

85.05

Replacement tip for soldering gun No 12941N

'

Code
'

79 14 00 06
'

12943N

Code

9.05

Soldering iron

230 V, 5060 Hz.

79 25 00 01
'

12965-2

19

20

2.35

Snap-off blade cutter 9 mm

1 With three 9 mm snap-off blades


(one blade fitted, two in the magazine)
1 Slider with blade-locking function
1 Includes blade snap-off tool and protective cap
1 With stainless steel blade guide
1 Ideally suited for cutting card, rubber, leather, wood etc.
1 Tool body made of cast zinc.
'

Code

L
mm

R
g

77 62 10 03

145

60

'

'

11.70

'

Code

77 42 00 30
77 42 00 60

30
60

'

'

12943R

R
g

224
276

1
1

12965-2R
53.00
54.50

Replacement tips for No 12943N

Spare blades 9 mm

10 pieces, fr No 12965-2.
'

'

Code

size

79 14 00 30
79 14 00 60

30
60

'

'

12965N

Code

7
31

1
1

'

79 25 10 03
8.70
8.70

3.30

Snap-off blade cutter 18 mm

'

'

Code

L
mm

R
g

77 62 10 01

174

200

282

1 With three 18 mm snap-off


blades (one blade fitted,
two in the magazine)
1 Slider with blade-locking function
1 Automatic blade reloading
1 Ergonomic design with synthetic caoutchouc inlay
1 With stainless steel blade guide and hanging hole
1 Ideally suited for cutting card, rubber, leather, wood etc.
1 Tool body made of cast zinc.

1 Blade adjustable by means of


slider
1 Spare blades can be stored inside the handle
1 Blade changes without tools
1 With hanging hole
1 Ideally suited for cutting card, rubber, leather, wood etc.
1 Tool body made of cast zinc.

'

12965-3

Safety knife

'

'

26

Code

L
mm

R
g

77 62 10 04

168

249

'

8.45

'

19.00

12965-3R

Spare blades 18 mm

13126-2

10 pieces, for No 12965-3.


'

Code
'

79 25 10 04
'

12966

LED penlight

73

4.95

Wire stripping knife with hooked blade

for cutting round the outer cable insulation and


longitudinal cuts.
1 accurate, fast and safe stripping of all popular
round cables from 4 - 28 mm O.
1 no damage to the inner conductors thanks to
infinitely variable adjustment of the cutting
depth.

1 Ex-rated for zone 1


1 Certifications: II 2G Ex e ib IIB T4 Gb, II 2D Ex ib IIIC T60C IP6X Db.
1 Three times brighter than conventional pen torches thanks to powerful
LEDs
1 Robust, electrically non-conducting, corrosion-proof housing made of
ABS/polycarbonate
1 High impact resistance and reduced glare thanks to rubber sheathed
bezel
1 Consistently bright beam throughout 80% of the lifetime of the alkaline
batteries due to eLED circuitry
1 Rubberised rear pushbutton for continuous or momentary action
1 Easy storage due to integrated clip holder close to bezel
1 Waterproof to IP 68 down to 3 m depth of water
1 Brightness: 35 lumen
1 Range: 64 m
1 Burn time: 3 hrs.
1 Batteries: 2 AAA/LR03, alkaline, 1.5 V (not supplied).

'

Code
'

77 62 00 03
'

80

14.50

'

Code
'

12966R

Spare blade for No 12966

77 49 00 12
'

13126-3

'

Code
'

79 25 00 03
'

13126-1

3.75

LED torch

U
1 Ex-rated for zone 1
1 Certifications: SEV 08 ATEX 0164, II 2G Ex e ib IIC T4,
II 2D Ex e ibD 21 T98C.
1 Powerful, extremely durable 2 watt LEDs
1 Robust, electrically non-conducting, corrosion-proof housing made of
ABS/polycarbonate
1 High impact resistance and reduced glare thanks to rubber sheathed
bezel
1 Consistently bright beam throughout 80% of the lifetime of the alkaline
batteries due to eLED circuitry
1 Zoom with a twist of the bezel
1 Rubberised front pushbutton for continuous or momentary action
1 Waterproof to IP 68 down to 3 m depth of water
1 Hydrogen scrubber catalyst, polarised battery contacts and 0-psi vent
minimize explosive risk from leaking batteries
1 Battery compartment designed to facilitate rapid battery change
1 Brightness: 77 lumen
1 Range: 100 m
1 Burn time: 5 hrs.
1 Batteries: 4 AA/LR06, alkaline, 1.5 V (not supplied).

dimensions
132 x 24 x 22 mm

R
g

102

LED headlamp

U
1 Ex-rated for zone 1
1 Certifications: SEV 08 ATEX 0163X, II 2G Ex ib IIC T4,
II 2D Ex ibD 21 T55C.
1 Waterproof construction for use in all weather conditions
1 Three beam modes - white spot, white diffused and red diffused
1 High and low power settings
1 Large-format ON/OFF button can be easily operated even when
wearing heavy gloves
1 LED torch module can be removed from housing and used as
stand-alone portable working torch
1 Beam adjustable using twist knob - no breakable hinges
1 With adjustable, elasticated textile strap
1 Durable, high-impact construction made of ABS/polycarbonate
1 Waterproof to IP 68 down to 10 m depth of water
1 Brightness: 65 lumen
1 Range: 60 m
1 Burn time: 13 hrs.
1 Batteries: 3 AAA/LR03, alkaline, 1.5 V (not supplied).

'

Code
'

77 49 00 11
'

dimensions
170 x 40 x 35 mm

53.50

Torch module

175

'

119.00

Code
'

77 49 00 13
'

dimensions
76 x 38 x 45 mm

R
g

110

81.50
283

Pipe cutters, Miscellaneous tools


13126

Torch

Spares for torches


'

for No

79 49 00 02
79 49 00 03
79 49 00 04
79 49 00 05

13126 (Spare lens)


13127 (Spare lens)
13126 (Bulb unit)
13127 (Bulb unit)

'

Zone 1 Ex-rated.
Housing and lens made of high-impact polycarbonate.
Laser-SPOT xenon lamp module generates a finely focussed white
collimation light beam with a net intensity up to 400% higher than normal.
Ex rated to category II 2G Ex e ib IIC T4 (Zone 1).
7852 candlepower. Service life of bulb: 30 hrs.
With lens protection made of tough Xenoy.
Beam width: 177 m. 39 lumen. With rotary knob.
For 3 alkaline baby cells (C) (not included with product).
Waterproof to IPX7.

Code

'

13130

33
7
25
10

1
1
1
1

40.50
11.50
51.50
21.70

Tweezers

straight, blunt,
finely milled inside,
stainless steel.
'

Code

L
mm

R
g

77 50 00 01

160

25

'

'

13131
'

Code

L
mm

R
g

77 49 00 02

191

178

'

'

88.50

16.50

Tweezers

bent, blunt,
finely milled inside,
stainless steel.
'

13127

Torch

Code

L
mm

R
g

77 51 00 01

155

22

'

'

Zone 1 Ex-rated.
Housing and lens made of high-impact polycarbonate.
Laser-SPOT xenon lamp module generates a finely focussed white
collimation light beam with a net intensity up to 400% higher than normal.
With light deflector.
Ex protected to category II 2G Ex e ib IIB T4, II 2D Ex ibD 21 IP67 T100C
(Zone 1).
571 candlepower. Service life of bulb: 20 hrs.
With lens protection made of tough Xenoy.
Beam width: 45 m. 11 lumen. With rotary knob.
Scope of supply: Pocket lamp, light deflector 90,
2 alkaline micro-batteries (AAA).
Waterproof to IPX7.

'

Code

L
mm

R
g

77 49 00 03

120

80

'

'

37.90

TCS 13126/13127/2

175 x 350 x 60 mm, 2 pieces


'

Code

'

96 83 00 14

475

'

No 13126
'

No 13127
'

284

199.40

13135

14.40

Wire cutter

with smooth cutting edges,


nickel-plated,
plastic covered handles.

'

Code

L
mm

R
g

75 27 00 01

145

93

'

'

14.00

Pullers

Pullers

STAHLWILLE Pullers

Designed with practical applications in mind, drop forged, precision machined

on the latest machine tools, hardened and tempered. STAHLWILLE pullers are
conscientiously assembled and tested under load. They are ideal tools for
removing gearwheels, ball bearings and pulleys from shafts, axles etc.
Product benefits at a glance

1 high

flexural strength thanks to struts with accurately calculated profiles and

milled, smooth guides.


1 highly

load-bearing extractor hooks made of oil-hardened chrome vanadium

steel with milled-profile jaws and specially-designed grip geometry for use in
confined spaces and optimised radii for shafts and axles.
1 smooth

running and high force transmission through the nut with its hard-

wearing, smooth thread contours.


1 high

extraction force with ease is made possible even where there is high

friction and counterforces due to the CNC milled precision thread.


1 damage

to the thread of the nut is effectively prevented, even if the full length

of the thread is used, due to the clearance at the end of the thread.
1 excellent

running characteristics of the thread itself thanks to high-grade

hardening and tempering and the special coatings on the thrust spindles.
1 to

enable stubborn parts to be loosened, it may be necessary to tap the puller

with a hammer after it has been tensioned. For this reason, the spindle head is
equipped with a rounded impact head.
1 close-tolerance,

performance-matched jaw sizes on the spindle head ensure non-

slip contact with the drive tool.


1 to

prevent damage to the shafts while extraction force is applied, the centre is

freely-swivelling.

Numerous pullers are available for different applications:

Standard pullers, battery terminal pullers, ball joint separators, internal pullers,
counter stays, separating fixtures, wheel hub pullersr

1 , the central threaded


2 is turned to ease the bearing off its mount without causing damage.

After attaching and locking the puller No 11060/11061

spindle

286

Battery terminal puller in use on a car battery

How a two-armed puller works

Separating fixture in use for


removing ball bearings

Puller in use for removing


gearwheels

Standard pullers
Two- or three-armed
puller? A threearmed puller is
generally preferable
to a two-armed one
provided there is
sufficient space
because it distributes
the pulling forces
more evenly.

287

Pullers
11050

Standard pullers

11051

two-armed, with sliding permanently


parallel extractor hooks, zinc plated;
for extracting gearwheels, ball bearings,
pulleys and similar parts from shafts or
axles; for removing ball bearings,
bearing outer races and bushes from holes;
hooks can be used as internal or external
hooks.

Standard pullers

three-armed, with sliding permanently


parallel extractor hooks, zinc plated;
for extracting gearwheels,
ball bearings, pulleys, fan wheels and
similar parts from shafts or axles;
for removing ball bearings,
bearing outer races and bushes from
holes; hooks can be used as internal or
external hooks.

'

Code
'

size

Clamp. width Clamp. depth


mm
mm

R
g

'

Code

71 13 00 11
71 13 00 12
71 13 00 13
71 13 00 14

1
2
3
4

2580
25130
50160
60200

100
100
150
150

1000
1100
2800
3200

1
1
1
1

83.00
88.00
149.00
167.00

'

71 13 00 15
71 13 00 16

5
6

80250
80350

200
200

6700
8000

1
1

277.00
314.00

'

'

H 11050

Arms for pullers No 11050/11051

1 piece
'

Code
'

size

79 13 00 11

79 13 00 12

79 13 00 13

'

11053

for puller
No
11050-1, -2
11051-1, -2
11050-3, -4
11051-3, -4
11050-5, -6

238

38.50

580
1615

1
1

48.50
83.50

71 15 02 11
71 15 02 12
'

11054

2580
25120
25160
25200

100
100
150
150

R
g

1280
1600
3600
3690

1
1
1
1

115.00
118.00
221.00
242.00

Pullers

three-armed, with swivelling extractor hooks


for larger reaches, zinc plated;
for extracting gearwheels, ball bearings,
pulleys and similar parts from shafts or axles;
hooks can be used as internal or external
hooks;
for internal extraction, simply turn the hooks
and spindle round;
the efficient leverage effect forces the hooks
firmly onto the part to be extracted.

'

Code
'

71 15 03 11
71 15 03 12
'

11056

'

Code

1
2
3
4

Clamp. width Clamp. depth


mm
mm

Standard pullers

two-armed, with swivelling extractor


hooks for larger reaches, zinc plated;
for extracting gearwheels,
ball bearings, pulleys and similar
parts from shafts or axles;
hooks can be used as internal or
external hooks;
for internal extraction, simply turn the
hooks and spindle round;
the large leverage effect ensures a firm
grip on the part to be extracted,
whether internal or external.

'

71 08 00 11
71 08 00 12
71 08 00 13
71 08 00 14

size

size
1
2

Clamp. width Clamp. depth


mm
mm
50300
50400

270
400

R
g

4500
5800

1
1

166.00
198.00

size
1
2

Clamp. width Clamp. depth


mm
mm
50300
50400

270
400

R
g

5700
8000

1
1

216.00
265.00

Set: Pullers

consisting of the most common


two- and three-armed pullers with
two- and three-armed, sliding,
parallel extractor hooks.
for extracting gearwheels, ball
bearings, pulleys and similar parts
from shafts or axles;
hooks can be used as internal or
external hooks;
the efficient leverage effect forces
the hooks firmly onto the part to be
extracted.

'

Code
'

96 71 13 11
'

288

Clamp. width Clamp. depth


mm
mm
120

100/200/250

R
g

7000

565.00

12150

Pullers

11040

two-armed version with swivelling,


double-action extractor hooks, zinc plated;
for extracting gearwheels, ball bearings,
pulleys and similar parts from shafts or
axles;
for removing ball bearings, bearing outer
races and bushes from holes;
for internal extraction, simply swivel the
hooks and turn the spindle round or just
turn the hooks round.

Battery terminal pullers

two-armed, with a self-centring quick-action


clamp and automatic feed, zinc plated;
for extracting battery terminal clamps, smaller
ball bearings, pulleys etc.;
as force is applied through the spindle, the
extractor hooks automatically apply increasing
force to the part being extracted;
particularly suited to car electrics, compressed
air system repairs and similar applications due
to the compact design and small hooks.

'

Code

size

71 14 02 11
71 14 02 12

1
2

'

'

Clamp. width Clamp. depth


mm
mm
20150
40220

80
130

R
g

720
1675

1
1

74.00
129.00

'

Code

size

71 12 00 11
71 12 00 12
71 12 00 13

1
2
3

'

12152

Three arm pullers

three-armed version with swivelling,


double-action extractor hooks, zinc plated;
for extracting gearwheels, ball bearings,
pulleys and similar parts from shafts or
axles;
for removing ball bearings, bearing outer
races and bushes from holes;
for internal extraction, simply swivel the
hooks and turn the spindle round or just
turn the hooks round.

'

11042

Code

size

71 14 03 11
71 14 03 12

1
2

'

Clamp. width Clamp. depth


mm
mm
20150
40200

80
130

R
g

920
2235

1
1

1060
1070
10100

45
65
80

R
g

245
261
560

1
1
1

39.20
39.50
49.80

Battery terminal pullers

three-armed, with a self-centring quickaction clamp and automatic feed,


zinc plated;
for extracting battery terminal clamps,
smaller ball bearings, pulleys etc.;
as force is applied through the spindle, the
extractor hooks automatically apply
increasing force to the part being extracted;
particularly suited to car electrics,
compressed air system repairs and similar
applications due to the compact design and
small hooks.

'

'

Clamp. width Clamp. depth


mm
mm

98.50
166.00
'

11055

Two arm pullers

two-armed, with swivelling


extractor hooks and lateral
clamp clip, zinc plated;
when the clamp clip is tightened,
the claws of the extractor hooks
locate under the part to be
extracted and lever it free as
force is applied before extraction
begins;
for extracting gearwheels,
ball bearings, pulleys,
drop arms and similar parts from
shafts or axles; the clamp clip presses the extractor hooks firmly against
the part being extracted.
'

size

71 19 00 11
71 19 00 12
71 19 00 13

1
2
3

'

size

71 18 00 11
71 18 00 12
71 18 00 13

1
2
3

'

'

11060

Clamp. width Clamp. depth


mm
mm
1060
1070
10100

45
65
80

R
g

299
340
692

1
1
1

60.50
61.50
66.00

Internal pullers

for extracting ball bearings,


bearing outer races and bushes,
zinc plated;
to be used with Counter stay No 11061
and Slide hammer No 11062;
even bearings which are tight up against the walls are securely gripped
due to the excellent clamping effect.
'

Code
'

Code

Clamp. width Clamp. depth


mm
mm
2070
20100
30150

85
100
150

R
g

1211
1643
2907

1
1
1

Clamp. width
mm

R
g

0
1
1a
2

812
1216
1620
2027

100
110
120
131

1
1
1
1

49.00
50.00
50.00
54.00

71 16 00 13
71 16 00 15
71 16 00 16
71 16 00 17

3
5
6
7

2736
3646
4658
5870

365
385
558
612

1
1
1
1

57.00
78.50
101.00
129.00

71 16 00 18

70100

1659

199.00

Code

size

71 16 00 10
71 16 10 11
71 16 00 21
71 16 00 12

'

125.00
145.00
196.00

'

289

Pullers
11061

Counter stays

12614

to be used with Internal Puller No 11060;


zinc plated;
insert and open up the internal puller;
screw the spindle of the counter-stay
into the internal puller;
extract the workpiece.

Pullers

zinc plated; for use with No 12613


of same sizes;
for extracting ball bearings,
roller bearings, bushes,
wheels and other tight fitting parts;
the puller is connected to separator
No 12613 to enable the workpiece
to be extracted.

'

'

Code

size

suitable for
No 11060

71 17 00 11
71 17 00 12
71 17 00 13

1
2
3

sizes 02
sizes 37
size 8

'

'

11062

R
g

654
1500
2317

size

71 04 00 10
71 04 00 11
71 04 00 12
71 04 00 13

0
1
2
3

'

S
1
1
1

45.40
70.50
141.00

'

V 12614

Slide hammers

Code

size

71 16 10 01
71 16 10 02

1
2

sizes 02
sizes 3; 5

'

12613

45110
55140
60215
85295

110
155
200
315

R
g

910
1220
2800
6000

1
1
1
1

59.50
95.50
145.00
216.00

Extensions

'

'

suitable for
No 11060

Clamp. width Extraction bolts


mm
mm

1 pair, for use with puller No 12614;


extensions for the extraction bolts
on the puller for use with longer
workpieces.

to be used with Internal Puller


No 11060; zinc plated;
for extracting ball bearings
if it is not possible to use
Puller No 11061 because there is insufficient space.

'

Code

R
g

650
1435

Code

size

for No

L
mm

R
g

79 44 00 11
79 44 00 12
79 44 00 13

1
2
3

12614-0, -1
12614-2
12614-3

100
150
150

89
233
743

1
1
1

'

S
1
1

52.00
85.50

'

11030

Separating fixtures

16.70
27.40
31.50

Universal wheel hub pullers

with three extractor hooks, zinc plated;


for extracting wheel hubs on HGV's and cars
up to a hole diameter of 225 mm;
the axially mounted threaded bush enables
the workpiece to be freed by gently tapping
the end of the spindle.

zinc plated; for use with No 12614 of


same sizes;
for separating and extracting ball
bearings, roller bearings, bushes,
wheels and other tightly fitting parts;
applying uniform pulling force to the side
bolts will gently separate workpieces;
apply puller No 12614;
apply force to pull off.

'

Code

size

71 03 00 10
71 03 00 11
71 03 00 12
71 03 00 13

0
1
2
3

'

'

Clamp. width
mm

Opening
mm

R
g

560
1275
22115
30155

60
75
115
155

562
787
2100
4462

1
1
1
1

'

64.00
80.50
121.00
190.00

Code

size

71 11 00 13
71 11 00 15

1
2

'

'

H 11030

Arms
3
5

R
g

3566
4568

1
1

169.00
216.00

Arm for No 11030

1 piece
'

Code

'

79 10 00 10
'

290

R
g

524

25.90

11041

Ball joint separators

12623-1

for forcing out ball pins on vehicles, zinc plated.

Ball joint separator

for vehicles with aluminium chassis;


zinc plated;
for extracting ball-joints,
especially on Audi A6 and A8
after model year 1999 and
for other vehicles with limited
work space.

C
A
B

'

Code
'

71 05 00 12
'

Fork opening
mm

Clear height
mm

R
g

24

6080

1577

142.00

'

Code
'

71 23 00 11
71 23 00 12
71 23 00 13
71 23 00 14

A
mm

size
1
2
3
4

B
mm

18
23
29
39

'

C
mm

37
45
55
70

37
45
60
80

12623-3

309
476
1300
2000

1
1
1
1

42.00
54.50
70.50
92.00

Ball joint separator

on heavy goods vehicles,


buses and construction site vehicles;
zinc plated.

size 1 for passenger vehicles


size 2 for passenger vehicles and vans
size 3 + 4 for trucks
'

Spindles

'

'

for puller
No

'

Code

No

79 28 10 11
79 28 11 11
79 28 10 12
79 28 10 13

SP 11040-1
SP 11040-2
SP 11040-3
SP 11050-1

11040-1; 11042-1
11040-2; 11042-2
11040-3; 11042-3
11050-1, -2; 11051-1, -2; 11056;
12150-1, 12152-1, 12614-0, -1

108
120
80
171

33.70

79 28 10 14
79 28 10 15
79 28 10 16
79 28 10 17

SP 11050-3
SP 11050-5
SP 11055-1
SP 11055-2

11050-3, -4; 11051-3, -4; 12614-2


11050-5, -6
11055-1
11055-2

590
1210
177
176

1
1
1
1

51.50
99.00
45.30
50.50

79 28 10 18
79 28 10 19
79 28 10 20
79 28 10 21

SP 11055-3
SP 11041-1
SP 11041-2
SP 11041-3

11055-3
11041-1
11041-2
11041-3

592
80
94
360

1
1
1
1

93.50
20.30
20.30
59.00

79 28 10 22
79 28 10 23
79 28 10 34

SP 11041-4
SP 11053-1
SP 12150-2

11041-4
11053-1, -2; 11054-1, -2
12150-2; 12152-2

231
880
440

1
1
1

78.50
86.50
56.00

'

Code
71 05 00 14
'

'

1
1
1

15.60
20.10
15.10

12623-4

Clear height
mm

R
g

3545

115

6000

303.00

Ball joint separator

on medium-sized and heavy HGV's,


buses and construction site and other
special vehicles; zinc plated.

'

Code
'

71 05 00 15
'

12616

Fork opening
mm

Fork opening
mm

Clear height
mm

R
g

2736

90

3438

162.00

Universal ball joint separator

zinc plated, DIN/ISO 7803,


for extracting ball-joints on cars
and light delivery vans.

'

Code

size

71 05 00 10

'

'

Fork opening
mm

Clear height
mm

R
g

1822

2050

611

80.50

9
12623

Ball joint separator

zinc plated; for extracting ball-joints


especially on BMW, Fiat, Ford,
Mercedes-Benz, Nissan, Opel, Toyota,
VW/Audi and Volvo cars.

'

Code
'

71 05 00 11
'

Fork opening
mm

Clear height
mm

R
g

20

1250

1284

103.00

291

STAHLWILLE
Certified to DIN EN ISO 9001.

After STAHLWILLE was certied, as one of the very rst companies


back in 1990, to DIN EN ISO 9002, our Quality Assurance System was also
certied to DIN EN ISO 9001 in 1992.

Special automotive tools

10

Special automotive tools

STAHLWILLE special automotive tools

Together with leading automotive manufacturers, STAHLWILLE develops special-purpose


tools and brand-specific sets of tools. This continuous development and enhancement
process covering tools for production and workshops ensures that the tools we make keep
pace with the latest developments in the industry.

Tidy tool management: STAHLWILLE tool sets for car repairs


Carefully selected suites of tools for Tool Trolleys and Tool Boxes ensure optimised
workflows. Whether it is in the garage, in production or in the pits, many
mechanics welcome the benefits afforded by model and marque specific tools to
guarantee safe, timesaving work.

Problem solver: STAHLWILLE special-purpose car pliers


Often enough, corroded or jammed parts in hard-to-reach places slow down repair
and servicing jobs in the engine space. With diesels, this includes the heater plug
sockets. STAHLWILLE heater plug socket pliers make it that much easier to remove
and refit these plug sockets, especially when the engine is still hot.

Better safe than sorry: STAHLWILLE sockets


It would be hard to imagine garage and production environments without
compressed air tools. Hardly surprising, then, that STAHLWILLE offer such a wide
range of tried-and-tested, job-specific sockets, e. g. the wheel-nut socket with the
closely-fitting plastic sleeve. This prevents damage to wheel bolts, wheel nuts and
the bolt holes especially on alloy wheels.

The specialists: STAHLWILLE KABELEX


Efficiency and economy in the workplace at a time when it pays to be competitive,
removing cables on vehicles safely and quickly gives you that advantage. This is
why STAHLWILLE offers over 40 different cable removing tools for cars. They are
available individually, in carefully selected sets or as special sets for specific vehicles.
The fine but highly resistant blades are made of chrome vanadium and special spring
steel..

Unbreakable: Special tools for car glass


The professionals really appreciate STAHLWILLE products for quickly and
accurately removing and fitting car glass. Twin suction lifters and a threecomponent glass removal set ensure that windscreens and other car glass are
easily and safely removed, fitted and transported.

10

294

A question of torque: Friction gauger


Setting steering systems accurately is a critical job and adhering to torque
settings and coefficients of friction is a crucial part of it. This is what STAHLWILLE
created the easily-operated Friction gauge No 73Nm/15 with a range of 215 N m.

Thick or thin: Measuring the thickness of brake discs


Checking the state of the brake discs is a valuable contribution to safety on the
roads. STAHLWILLE offers a vernier calliper which enables the garage to easily
check the discs in situ and compare the dimensions with the manufacturer's
instructions.

5
10

295

Special automotive tools


1520
MercedesBenz

STAHLWILLE KABELEX Protect


For workshops and cable configuration
(Kabelex table see page 336)
1 Bicoloured handle:
- with locking blade cover, to protect the fine blade and guard against
injury.
- easier to handle for fine and intricate work on miniature connectors.

Tool set KABELEX

16 pieces, for Mercedes-Benz.


Content:
No 1501, 1504, 1508: ejection
tools for contact sizes
O 1.5 and 2.5 mm
No 1511, 1514, 1518: dismantling
sleeves for contact sizes
O 1.5 and 2.5 mm
No 1553, 1591: cable extractor
tools for contact sizes
y 2.8 and 5.8 mm
No 1556: cable extractor tool for Micro-Timer II, III contacts
y 1.6 mm
No 1559: cable extractor tool for Maxi-Power Timer contacts
y 9.5 mm
No 1578K-1: cable extractor tools for SLK contacts (primary)
y 2.8 mm
No 1578K-2: cable extractor tool for SLK contacts 97
(primary and secondary) y 2.8 mm
No 1584, 1585: cable extractor tools for soldered contacts with contact
O 2.5 and 4.0 mm
No 1587: cable extractor tool for flat plug-in sockets, E-95 contacts
y 1.65 mm
No 1589K: cable extractor tool for flat plug-in sockets, LSK contacts
y 8 mm
'

Code
'

1 Releases cable connectors quickly and easily without cutting them off
saves time and money.

96 74 62 04
'

1550 BMW

1 Also available in carefully selected sets.


1 Special sets for vehicle makes: BMW, Mercedes-Benz, Opel,
VW/Audi/Seat/Skoda/Porsche, MAN/Volvo and Renault/PSA
1 Over 40 different cable extractors available.
1 Blades made of extremely tough and durable chrome vanadium and
special spring steel.

1510
VW/Audi

Tool set KABELEX

11 pieces, for VW/Audi, Seat,


Skoda, Porsche.
Content:
No 1501, 1502: ejection tools for
contact sizes O 1.5 and 3.5 mm
No 1511, 1512: dismantling
sleeves for contact sizes
O 1.5 and 3.5 mm
No 1553, 1557, 1558, 1591:
cable extractor tools for contact
sizes y 2.8; 4.8 and 5.8 mm
No 1556: cable extractor tool for Micro-Timer II, III contacts y 1.6 mm
No 1556-1: cable extractor tool for flat plug-in sockets with
asymmetrically positioned latches in terminals with two release
channels y 0.64 mm
No 1574: cable extractor tool for Micro Timer I contacts y 1.6 mm
'

Code
'

10

96 74 62 03
'

296

R
g

1070

423.65

2040

593.15

Tool set KABELEX

13 pieces, for BMW.


Content:
No 1501, 1502, 1504, 1508:
ejection tools for contact sizes
O 1.5; 3.5 and 2.5 mm
No 1511, 1512, 1514, 1518:
dismantling sleeves for contact
sizes O 1.5; 3.5 and 2.5 mm
No 1553: cable extractor for plugs
with single release channel
y 2.8 mm and 5.8 mm
No 1578K-1: cable extractor for SLK contacts (primary)
y 2.8 mm
No 1578K-2: cable extractor for SLK contacts 97 (primary and secondary)
y 2.8 mm
No 1591: cable extractor tool for contact sizes y 2.8 and 5.8 mm
No 1589K: cable extractor tool for flat plug-in sockets, LSK contacts
y 8 mm
'

Code
'

96 74 62 07
'

R
g

1795

418.00

1700
MAN/Volvo

Tool set KABELEX

1570/1

14 pieces, for MAN/Volvo,


Mercedes-Benz trucks.
Content:
No 1501, 1502, 1503, 1506:
ejection tools for contact sizes
O 1.5; 3.5; 4.0 (ABS) and 4.0 mm
No 1511, 1512, 1513, 1516:
dismantling sleeves for
contact sizes
O 1.5; 3.5; 4.0 (ABS) and 4.0 mm
No 1523: assembly sleeve (ABS)
No 1553, 1591: cable extractor tools for contact sizes
y 2.8 and 5.8 mm
No 1576: cable extractor tool for flat plugs without box y 2.8 mm
No 1577: cable extractor tool for VKR Box contacts y
No 1577-1: cable extractor tools for MKR/MKS contacts y 1.5 mm

'

'

96 74 63 03
'

1570/2
R

'

96 74 62 08
'

1720
Renault/PSA

1815

Code

'

Code

Basic set KABELEX

6 pieces.
Content:
No 1501, 1502: ejection tools for
contact sizes O 1.5 and 3.5 mm
No 1511, 1512: dismantling
sleeves for contact sizes
O 1.5 and 3.5 mm
No 1553, 1591: cable extractor
tools for contact sizes
y 2.8 and 5.8 mm

500.15

Tool set KABELEX

7 pieces, for Renault/PSA


(Citron and Peugeot).
Content:
No 1505: ejection tool for contact
sizes O 2.3 mm
No 1515: dismantling sleeve for
contact sizes O 2.3 mm
No 1553, 1554, 1591: cable
extractor tools for contact sizes
y 2.8 and 5.8 mm
No 1556: cable extractor tool for
Micro-Timer II, III contacts
y 1.6 mm
No 1574: cable extractor tool for Micro-Timer I contacts y 1.6 mm

710

179.75

Universal set KABELEX

12 pieces.
Content:
No 1501, 1502, 1505: ejection
tools for contact sizes
O 1.5; 3.5; 2.3 mm
No 1511, 1512, 1515: dismantling
sleeves for contact sizes
O 1.5; 3.5; 2.3 mm
No 1553: cable extractor tool for
plugs with one release channel
y 2.8 and 5.8 mm
No 1556: cable extractor tool for Micro-Timer II, III contacts
y 1.6 mm
No 1559: cable extractor tool for Maxi-Power Timer contacts
y 9.5 mm
No 1562: cable extractor tool for Pit-Pod contacts
No 1574: cable extractor tool for Micro-Timer I contacts and ABS plug-in
housing y 1.6 mm
No 1591: cable extractor tool for plugs with two release channels
y 2.8 and 5.8 mm

'

Code

'

'

Code
'

96 74 62 10
'

1560

670

96 74 63 04
'

245.05

1590

1130

399.50

Tool set KABELEX

5 pieces, for flat plug-in sockets.


Content:
No 1551, 1552: cable extractor
tools for flat plug-in sockets
y 2.8 and 5.8 mm in terminals
with double release channel
No 1553, 1554, 1555: cable
extractor tools for contact sizes
y 2.8 and 5.8 mm in terminals
with single release channel

Tool set KABELEX

10 pieces, for round plug


connections (incl. ABS).
Content:
1 each No 1501: ejection tool for
contact sizes O 1.5 mm
1 each No 1502: ejection tool for
contact sizes O 3.5 mm
1 each No 1503: ejection tool for
contact sizes O 4.0 mm
assembly or dismantling sleeve
(ABS)
2 each No 1511: dismantling
sleeves for contact sizes O 1.5 mm
(1 each mounted)
2 each No 1512: dismantling sleeves for contact sizes O 3.5 mm
(1 each mounted)
2 each No 1513: dismantling sleeves for contact sizes O 4.0 mm
(1 each mounted)
1 each No 1523: assembly sleeve (ABS)

'

Code
'

96 74 62 02
'

R
g

360

153.20

10

'

Code
'

96 74 62 01
'

R
g

520

168.60

297

Special automotive tools


15011508

Ejection tools KABELEX

15531555

for round snap-in receptacles,


including dismantling sleeve.

Cable extractor tools KABELEX

for flat plug-in sockets locked in


terminals with single release
channel.

'

Code
'

96 74 62 30

96 74 62 31

96 74 62 32

96 74 62 33
1

96 74 62 34
96 74 62 35
96 74 62 36
96 74 60 37

'

for contact sizes R


g S
O mm

No

No

74 62 00 03

1553 (e.g. BMW, Mercedes-Benz, Ford,


MAN, Opel, Porsche, PSA, Renault,
Seat, Skoda, VW/Audi)
1554 (e.g. BMW, PSA, Renault)
1555 (e.g. BMW)

'

1501 + 1511 (e.g. BMW,


Mercedes-Benz, Fiat, MAN, Opel,
Porsche, Seat, Skoda, VW/Audi)
1502 + 1512 (e.g. BMW,
Mercedes-Benz, Fiat, MAN, Opel,
Porsche, Seat, Skoda, VW/Audi)
1503 + 1513 for ABS (trucks) or
assembly sleeve No 1523
(e.g. Mercedes-Benz, MAN, Scania)
1504 + 1514 (e.g. BMW,
Mercedes-Benz, Opel)

1.5

1505 + 1515 (e.g. Ford, Opel,


PSA, Renault)
1506 + 1516 (e.g. Mercedes-Benz trucks,
MAN, Scania)
1507 + 1517
(e.g. Scania gears GRS 900)
1508 + 1518 (e.g. BMW, Mercedes-Benz)

37

36.80

3.5

59

40.55

4.0

79

53.85

2.5

60

42.10

2.3

46

37.35

4.0

72

54.10

1.5
1.5

72
46

1
1

44.75
53.10

74 62 00 04
74 62 00 05
'

1556

Code
'

for contact sizes L


O mm mm

inside

outside R
g S

O mm O mm

Code

No

78 60 00 01
78 60 00 02
78 60 00 03
78 60 00 04

1511 for No 1501


1512 for No 1502
1513 for No 1503
1514 for No 1504

1.5
3.5
4.0
2.5

30
30
45
30

2.9
4.4
6.0
4.0

3.3
5.0
6.5
4.4

1
1
1
1

10
10
10
10

2.00
2.25
2.85
2.70

78 60 00 05
78 60 00 06

1515 for No 1505


1516 for No 1506
(for MOLEX
contacts 4.0 mm )
1516-A for No 1506
(for AMP
contacts 4.0 mm)
1517 for No 1507

2.3

35

3.0

3.3

10

2.55

78 60 00 07

78 60 00 18

1518 for No 1508


(3 x 120 slotted)

'

1523

4.0

35

5.6

6.0

10

4.0
1.5

30
26

5.4
2.3

5.8
2.8

1
1

10
10

3.10
2.85

1.5

32

2.7

3.5

9.90

for contact sizes L


mm
O mm
4.0

'

74 61 20 06

1557/1558

1551/1552

50

inside

O mm
4.0

outside R
g S
O mm
6.5

59.00

11.90

Cable extractor tools KABELEX

74 62 00 01
74 64 00 02

1551
1552

0.64

19

60.50

Cable extractor tools KABELEX

Code

No

74 62 00 07
74 62 00 08

1557
1558

for contact sizes


y mm

R
g

2.8
4.8

21
22

1
1

1559

47.80
50.00

Cable extractor tool KABELEX

for flat plug-in sockets,


Maxi Power Timer contacts,
Mercedes-Benz, VW/Audi.
'

Code

'

No

for flat plug-in sockets with


asymmetrically positioned latches
in terminals with two release
channels, Seat, Skoda, VW/Audi.

'

Code

for contact sizes


y mm

'

for flat snap-in receptacles e.g.


BMW, Ford, Opel, Porsche, Seat,
Skoda, VW/Audi.

10

Code
'

'

78 61 00 01

'

17

'

'

'

1.6

'

3.10

for No 1503

'

Cable extractor tool KABELEX

'

Assembly sleeve KABELEX ABS

Code

for contact sizes


y mm

for flat plug-in sockets with


asymmetrically positioned latches in
terminals with two release channels,
Seat, Skoda, VW/Audi.

'

21.00
20.70
21.80

Dismantling sleeves KABELEX


1556-1

78 60 00 16

1
1
1

Cable extractor tool KABELEX

'

16
16
16

for flat plug-in sockets,


Micro Timer II, III contacts,
e.g. Mercedes-Benz, Opel, Porsche,
PSA, Renault, Saab, Seat, Skoda,
VW/Audi.

74 62 00 06

'

2.8; 5.8
2.8
5.8

'

'

15111518

for contact sizes R


y mm
S
g

Code

74 62 00 09

for contact sizes


y mm

R
g

2.8
5.8

19
19

1
1

'

35.10
36.20

1562

for contact sizes


y mm

R
g

9.5

39

51.00

Cable extractor tool KABELEX

for flat plug-in sockets,


Pit-Pod contacts, all vehicle makes.

'

Code
'

74 62 00 12
'

298

for contact sizes


y mm

R
g

various

25

45.80

1567*/1568*

Cable extractor tools KABELEX

1577-1

for flat plug-in sockets,


Ducon-contacts in terminals with
two release channels, Opel.

Cable extractor tool KABELEX

for flat plug-in sockets,


MKR/MKS contacts, e.g. MAN/Volvo.

'

'

Code

No

'

for contact sizes


y mm

Code
'

74 62 00 17
74 62 00 18

1567
1568

'

4.8; 6.3
9.5

22
45

1
1

36.30
33.30

R
g

1.5

23

74 61 50 27
'

* to be discontinued

1578K-1

'

1572

for contact sizes


y mm

66.00

Cable extractor tool KABELEX

for flat plug-in sockets,


SLK contacts (primary),
e.g. BMW, Mercedes-Benz.

Cable extractor tool KABELEX

for flat plug-in sockets with


asymmetrically positioned latches in
terminals with two release channels,
Ford, Renault.

'

Code
'

for contact sizes


y mm

R
g

2.8

35

74 61 00 28
'

38.80

'

Code
'

for contact sizes


y mm

R
g

2.8

18

74 62 00 22
'

1574

1578K-2
53.50

Cable extractor tool KABELEX

Cable extractor tool KABELEX

for flat plug-in sockets,


SLK contacts 97
(primary, secondary),
e.g. BMW, Mercedes-Benz.
'

for flat plug-in sockets,


Micro-Timer I contacts and ABS
plug-in housing, Fiat, Ford, Mazda,
Opel, PSA, Renault, Saab, VW/Audi.

Code
'

for contact sizes


y mm

R
g

1.6

15

74 62 00 24
'

2.8

35

'

1584/1585

'

74 61 20 28

'

Code

for contact sizes


y mm

52.00

Cable extractor tools KABELEX

for round soldered contacts,


Mercedes-Benz.
25.60
'

1575

Cable extractor tool KABELEX

for round soldered pin contacts,


Ford, for flat plug-in sockets
(retention by locking device on
terminal), Fiat, Mazda, Toyota.

'

for contact sizes


O mm

74 62 00 25
'

74 62 00 34
74 62 00 35

1584
1585

for contact sizes


O mm

R
g

4.0
2.5

13
11

1
1

'

1587
for contact sizes
y mm

R
g

2.8; 5.8

15

1.5

23.30
22.80

Cable extractor tool KABELEX

for flat plug-in sockets,


E-95 contacts, Mercedes-Benz.
20.30
'

1576

Code

Cable extractor tool KABELEX

'

Code
74 62 00 26
'

1577

1589K

for contact sizes


y mm

R
g

2.8

18

47.80

74 62 00 27

23

Cable extractor tool KABELEX

'

74 61 00 39
'

1591
R
g

49

59.50

Cable extractor tool KABELEX

'

Code

'

'

1.65

for flat plug-in sockets,


LSK contacts, e.g. BMW,
Mercedes-Benz.

for flat plug-in sockets,


VKR Box contacts, e.g. MAN.

Code

'

'

'

for contact sizes


y mm

74 62 00 37

for flat plug-in sockets with single


latch (flat plug without box),
e.g. MAN.

'

No

'

'

Code

Code

73.50

for contact sizes


y mm

R
g

45

39.00

Cable extractor tool KABELEX

for flat plug-in sockets in terminals


with two release channels,
Junior Power Timer contacts,
Standard Power Timer contacts,
e.g. BMW, Mercedes-Benz, Fiat, Ford, MAN, Opel, PSA, Renault, Saab,
VW/Audi.

10

'

Code
'

74 62 00 41
'

for contact sizes


y mm

R
g

2.8; 5.8

25

61.00
299

Special automotive tools

Car body repair tools and pullers

10780

Planishing hammer

short.

10980

Panel beating set

7 pieces, in steel case.


Content:
Hammers: No 10785; 10790;
Dollies: No 10838; 10841;
10861; 10865;
Pliers:
No 10935

'

Code

mm

mm

L1
mm

L2
mm

R
g

70 13 00 03

32

25

300

100

346

'

'

10785
'

Code
'

98 81 20 01
'

10998

35.50

Planishing hammer

short, round face chequered.

kg

7.35

307.10

Panel beating set

'

17 pieces, in steel case No 83/09.


Content:
Hammers: No 10775; 10785; 10790;
10811; 10950; 10955/35;
Dollies: No 10830; 10835; 10840;
10850; 10861;
Pliers: No 10910; 10930;
Special Spoons: No 10890; 10895;
10900;
Body File Holder: No 10905;
Padlock: No 12932

Code

mm

mm

L1
mm

L2
mm

R
g

70 13 00 04

40

35

300

96

484

'

'

10790

55.50

Pecking hammer

with round face and ball pein.

'

Code
'

98 81 21 01
'

'

kg

18.3

888.80

Code
'

70 13 00 05
'

10775

Dinging hammer

mm

L1
mm

L2
mm

R
g

18/41

300

158

480

10795

42.50

Pecking hammer

with round face and acorn


shaped pein.

'

Code
'

70 13 00 02
'

mm

L1
mm

L2
mm

R
g

30/40

300

155

516

'

40.30

Code
'

70 13 00 06
'

10776

Special planishing hammer

10800

large extra thin faces,


square face chequered.

mm

L1
mm

L2
mm

R
g

20/41

300

160

460

42.40

Pecking hammer

short, round flat face


and pointed pein.

'

Code

mm

mm

L1
mm

L2
mm

R
g

70 13 00 10

46

40

320

115

521

'

'

'

77.50

Code

mm

L1
mm

L2
mm

R
g

70 13 00 07

35

300

135

360

'

'

10

300

42.40

10805

Pecking hammer

10832

Planishing anvil

round flat face,


oblong, thin pein,
approx. 1 mm thick.

'

'

Code

L1
mm

mm

'

70 13 00 08

40

'

10806

300

L2
mm
160

R
g

450

S
2

faces/mm

70 21 00 15

85 x 55 / 45 x 40

'

45.40

Code
'

10835

Pecking hammer

1160

63.00

Wedge dolly

extra large thin face


and pein.

'

'

Code

L
mm

b
mm

h
mm

R
g

70 21 00 02

130

55

32

958

'

Code

mm

L1
mm

L2
mm

R
g

70 13 00 11

40

300

135

382

'

'

10811

'

59.50

10838

58.50

Anvil dolly

Planishing and grooving hammer

'

Code

L
mm

b
mm

h
mm

R
g

70 21 00 03

75

60

50

1068

'

'

42.40

'

mm

mm

L1
mm

L2
mm

Code

70 13 00 12

30

36 x 10

320

160

531

'

'

10812

10840

Special anvil dolly

35.80

Planishing and grooving hammer


'

Code

L
mm

b
mm

h
mm

R
g

70 21 00 04

70

57

70

1250

'

'

57.00

'

mm

mm

L1
mm

L2
mm

Code

70 13 00 13

30

25 x 5

300

115

350

'

'

10830

10841

Thin dolly

37.30

Dolly

'

'

Code
'

70 21 00 01
'

L
mm
80/100

b
mm
70/45

h
mm
65

R
g

1450

Code

L
mm

b
mm

h
mm

R
g

70 21 00 05

107

66

28

984

'

S
1

'

44.60

62.50

10842

Diabolo dolly

10
'

Code

mm

h
mm

R
g

70 21 00 06

57

60

658

'

'

42.50
301

Special automotive tools


10845

Toe dolly

10880

Bumping spoon

'

Code

L
mm

b
mm

h
mm

R
g

70 21 00 08

120

55

22

770

'

'

'

44.60

Code

L1
mm

L2
mm

R
g

70 22 00 01

460

200

1900

'

'

10850

74.00

L1 = length overall
L2 = working length

Anvil block

'

axe shape.

10885

Bumping spoon

'

Code
'

70 21 00 09
'

10855

L
mm

b
mm

h
mm

R
g

65/50

25/8

140

860

38.80

Universal anvil dolly

'

Code

L
mm

R
g

70 22 00 02

500

2210

'

'

10890

88.50

Body spoon

'

Code
'

70 21 00 10
'

L
mm

b
mm

h
mm

R
g

70/60

50/45

58

1200

66.50

'

Code

L1
mm

L2
mm

R
g

70 22 00 03

270

130

520

'

10861

Toe dolly

'

35.50

chequered surface.

10895

Body spoon

'

Code

L
mm

b
mm

h
mm

R
g

70 21 00 14

120

55

30

1033

'

'

'

47.40

Code

L1
mm

L2
mm

R
g

70 22 00 04

390

200

1035

'

10865

Heel dolly

'

57.50

L1 = length overall
L2 = working length
'

10900

Flange tool

with leather cap.


'

Code

L
mm

b
mm

h
mm

R
g

70 21 00 12

80

60

35

1070

'

'

10866

42.70

'

Code

L
mm

R
g

70 22 00 05

400

1150

'

Dolly

'

with three flat and three


shaped faces.

10925

32.50

Soldering wedges, wood

5 pieces.
'

Code

L
mm

b
mm

h
mm

R
g

70 21 00 16

115

48

48

1550

'

'

68.00
'

10

Code
'

77 53 00 01
'

302

R
g

364

23.10

11005

Pry bar

File blades for No 10922

head and point polished.


'
'

L
mm

Code
'

72 09 00 00

400

'

11006

mm

14

500

No

79 06 00 14

10917 coarse, without


swarf breaker, half
round, angled cut
10921 coarse, without
swarf breaker, half
round, radial cut

'

41.80

Lever bar

79 06 00 04

special steel, bright nickel-plated.


'

L
R
mm g

350 208

33.60

350 216

43.90

teeth
per inch

Code

'

Code

L
mm

W
mm

R
g

72 09 00 02

400

14

500

'

'

11007

12752
31.50

Lever bar

Tin snips

lever action, spring-assisted


for self-opening action.
Heavy duty cutting:
sheet steel up to 1.8 mm
or stainless steel sheet up to 1.2 mm.

special steel, bright nickel-plated.


'

shape

L
mm

L
"

R
g

L 1)
R 2)

260
260

10 1/2
10 1/2

532
532

1
1

'

Code

L
mm

W
mm

R
g

72 09 00 03

400

17

643

'

'

Code
'

48.50

75 23 00 01
75 23 00 02
'

71.00
70.50

) left hand cutting


) right hand cutting

10905

Body file holder

'

with coarse blade.

12753

'

Code

L
mm

b
mm

h
mm

R
g

72 16 00 00

365

35

110

760

'

'

Tin snips

lever action, spring-assisted


for self-opening action.
Heavy duty cutting:
sheet steel sheet up to 1.8 mm
or stainless steel sheet up to 1.2 mm.
90.00

L = Length, b = Width, h = Height

'

Code

'

'

10923

shape

L
mm

L
"

R
g

L 1)
R 2)

260
260

10 1/2
10 1/2

473
473

1
1

jaw width
mm

L
mm

R
g

15
30

300
300

831
847

1
1

75 24 00 01
75 24 00 02

Body file holder

'

wooden, for flat blades.

70.00
70.00

) left hand cutting


) right hand cutting

1
2
'

'

L
mm

Code
'

72 20 00 02

530

'

10642

300

24.80

Spare blades for No 10905 and No 10923

Set-off pliers

for offsetting sheet metal


edges up to 1 mm thickness,
ensuring shoulder free surface.
Handles fitted with
H.D. plastic sleeves.

'

teeth
per inch

Code

No

79 06 00 01

10906 fine,
radial cut
10907 medium,
radial cut
10908 coarse,
radial cut
10915 medium,
angled cut
10916 coarse,
angled cut

'

79 06 00 02
79 06 00 03
79 06 00 12
1

79 06 00 13
'

10922

L
mm

'

15

350

321

10

39.70

12

350

286

10

38.90

350

279

10

36.00

12

350

282

10

33.90

350

252

10

32.10

Body file holder

wooden, for half round radius


file blades.

Code

size

76 49 00 01
76 49 00 02

1
2

'

'

10643

Punch pliers

for use on sheet metal up to 1 mm


thickness (hole spot welding MAG
welding technique).
Use in conjunction with setoff pliers
No 10642.
Handles fitted with H.D. plastic
sleeves.

Code

L
mm

R
g

72 20 00 01

530

260

Code

size

mm

L
mm

R
g

76 59 00 02

5.5

300

806

'

'

'

10

'

'

'

87.50
89.00

133.00

27.00
303

Special automotive tools


12727

Spot weld milling cutter

12770/2

HSSE steel, for spot-weld removal


on car body or sheet metal
construction.
Replaceable milling cutter size 10 mm.
Cutting depth adjustment by set screw,
avoids distortion damage to sheet metal.

Lever bar

for levering off fragile caps,


decorative trim (strips and rings),
switches, rubber or fabric trim
without damaging them. Finely honed, rounded edges ensure the vehicle
paintwork and surrounding materials are not damaged or scratched.
'

Code

L
mm

R
g

74 59 01 02

185

20

'

Code

L
mm

R
g

72 26 00 01

72

19

'

'

12728

'

26.60

'

12770/3

Replacement milling cutter

24.30

Plastic lever bar

for removing trim and rubbing


strips of all kinds on bodywork
and around windscreens, rear and side windows.
The broad area of contact prevents damage such as scratching of painted
surfaces, deformation of strips and damage of glass.

'

L
mm

Code
'

79 26 00 01

13

'

'

S
10

12.00

Code

L
mm

R
g

74 59 00 03

300

209

'

'

41.50

Spot weld drills


for clean, burr-free removal of
spot-weld. Self-cutting centre point
avoids running off spot weld.
Can be reground.

Tools for fitting/removing


vehicle glass
10350N

'

Code

No

72 27 00 07
72 27 00 08

12729
12730

'

R
g

7
8

18
24

5
5

mm

'

18.90
23.30

Tools for vehicle doors

Windscreen replacement set VERITRAC

1 guide handle
1 draw handle
1 coil cutting wire (50 m)
2 double suction lifters

'

Code

12769

'

Universal alignment tool


for automobile doors

98 74 27 11
'

Scope of application:
Almost all car and van doors,
boot lids and hatchback doors.
The application for this tool is door
locks and door guide pins.
Also suitable on door lock shackles,
i.e. as on Opel and Mercedes-Benz.
The universal alignment tool is supplied with 3 different,
interchangeable special bolts, housed within the tubular handle.
The handle bend is reinforced by a twin tube.

10351N

Code

10352

'

74 45 00 10

720

1815

'

'

12770

10

203.00

Lever bar

powder coated for improved


slide effect, for removal of doors
trims in cars.

Code

Code

R
g

74 59 01 01

260

150

304

S
1

95.80

Two double suction lifters

Suction cap dia. 120 mm,


mechanical action with
safety lock.
Special ABS-plastic,
oil and acid resistant.
With belt slots in the handles.
Carrying capacity 60 kg.

'

L
mm

'

458

'

'

'

331.80

'

'

Code

Windscreen removal set VERITRAC

96 74 27 11

as 10350N, but without


double suction lifters.

'

L
mm

1760

74 28 00 01
'

21.10

R
g

1405

236.00

10352/1

Double suction lifter

10355

Suction cap dia. 120 mm,


mechanical action with
safety lock.
Special ABS-plastic,
oil and acid resistant.
With belt slots in the handles.
Carrying capacity 30 kg.

Wire insert probe

for threading cutting wire


through hardened adhesive,
2.5 mm steel tubing
with brass handle.
'

Code
'

74 27 00 04
'

'

Code
'

74 28 00 05
'

10351/1

695

1474/2
118.00

Draw handle

for drawing cutting wire through


adhesive seal.

91

23.30

Wire insert awl

for feeding or pulling


cutting wire through hardened
adhesive.
'

Code
'

78 03 01 02
'

69

20.90

'

Code
'

74 27 00 01
'

10351/2

90

12718
28.50

Guide handle

Flat scraper

for removing residues


of sealant and adhesive.
'

for fixing and clamping


cutting wire inside vehicle.

Code

L
mm

R
g

72 03 01 01

265

160

'

'

19.00

'

Code
'

74 27 00 02
'

10351/3

196

10356
33.20

Guide handle

for fixing and clamping


cutting wire inside vehicle.
Extra long extension makes
it especially suited to
recessed glass.

'

Code
'

74 27 00 06
'

SD10351N

Width
mm

R
g

165

40

90

'

'

Length
mm

74 27 00 05

10356R

'

Code

Scraper

for removing residues of adhesive and


stickers from vehicle glass.
Blade 40 mm wide, 0.3 mm thick,
interchangeable with cover.

190

10.60

Spare blades

10 pieces dispenser.
40.90

Spare cutting wire

special alloy steel 0.6 x 0.6 mm.


Easy wire removal without the rest
unrolling.

'

Code
'

79 27 00 15
'

45

7.05

'

Code

L
m

R
g

79 27 00 11

50

170

'

'

10354

12749
34.10

Tension strap with ratchet

for clamping and fixing freshly


fitted vehicle glass,
synthetic webbing.

'

Code

L
mm

R
g

72 31 01 01

495

582

'

'

12749R

'

Code
'

74 27 00 03
'

Scraper with reversible tungsten steel blade

for removing residues of adhesive


and stickers from vehicle glass.
Can also be used for scraping metal and seals.
Includes angled inner hex. screwdriver.

Width
mm

R
g

25

375

76.50

10

Spare blade

for scraper No 12749.


18.90

'

Code
'

79 31 00 01
'

R
g

19

51.50
305

Special automotive tools

Workshop sets
806/10

No 415
'

Tool set

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)

No 4630

sizes 1; 2; 3

'

'

'

'
'

Code

kg

'

98 83 00 01

13.35

'

'

1125.60

'

'

'

96 83 81 26

96 83 81 27

No 10760CV
'

99 Tools, in plastic inlays (modular system see page 44-53), 9x1/3 and
1x3/3 inlays for 4 drawers (No 91P for 2 drawers), suitable for
Workbench No 92KM G, Tool trolleys No 91B, 91P, 97N, 97N/KM, 97H/8,
97H/KM; Tool boxes No 94N, 94N/KM, Magazine case No 920 and
Wheely box No 922N.

1/4"

'

1/2"

No 65 01 5 180
'

No 65 29 5 200
'

No 65 43 4 002
'

No 65 45 4 002
'

96 83 81 28

96 83 81 10

No 65 51 6 240
'

No 65 64 2 250
'

No 66 02 5 160
'

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

'

96 83 81 12

96 83 81 13

'

'

'

'

96 83 82 37

96 83 81 21

96 83 81 23

96 83 81 25
No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4" a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

'

'

'

'

10

'

'

'

'

'

306

806/9 TCS

TCS tool set

No 415

'

No 10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 3 (1.0 x 5.5 x 125 mm)
size 4 (1.2 x 6.5 x 150 mm)

No 4630

sizes 1; 2; 3

'

98 Tools, in TCS inlays (Tool Control System see page 55-69), 7x1/3,
1x2/3 and 1x3/3 inlays for 4 drawers (No 91P for 2 drawers),
suitable for Workbench No 92KM G, Tool trolleys No 91B, 91P, 97N,
97N/KM, 97H/8; 97H/KM; Tool boxes No 94N, 94N/KM,
Magazine case No 920 and Wheely box No 922N.

1/4"

'

'

'

'

1/2"

'

Code

'

kg

'

98 83 00 04

12.53

'

1210.85

'

'

'

'

96 83 81 75

96 83 81 76

No 65 01 5 180
'

No 65 29 5 200
'

No 65 43 4 002
'

No 65 45 4 002
'

96 83 81 77

96 83 82 78

No 65 51 6 240
'

No 65 64 2 250
'

No 66 02 5 160
'

No 102

175 mm

No 108

150 x 6; 175 x 6 mm

No 109

size 6; 100 x 3.4 mm

No 10956

O 35 mm

No 10960

500 g

'

'

96 83 81 79

96 83 81 80

'

'

'

96 83 81 81

Tool Control System


The safety inlay system
1 Designed to fit our Tool Trolleys and Tool Boxes
1 With yellow signal cut-outs to show whether all tools are

96 83 81 83

96 83 81 82
No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24 mm

No 40

1/4" a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

'

'

'

'

'

'

'

'

'

in their places

10

307

Special automotive tools


1110 TCS

Workshop set for Audi

No 25

sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;


14 x 15; 16 x 18; 17 x 19 mm

No 40

1/4" a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;


11; 12; 13; 14 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2
No 405/4

1/4"
1/4"

D a 54 mm
D a 100 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 409

3/8"

D 1/4" a

No 50

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 52

1/2" a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 54

1/2" a sizes 5; 6; 7; 8; 10; 12; 14; 17;


19 mm

No 54KK

1/2"

a sizes 5; 6; 7; 8; 10 mm

No 54X
No 59X

1/2"

a sizes M8; M10; M12; M14; M16


a size M18

No 1054X/M8
No 3054X/M10
No 3054X/M12
No 3054X/M14

1/2"

No 54TX

1/2"

a sizes T50; T55; T60

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 509W/3

1/2"

D a 75 mm

No 509W/5

1/2"

D a 130 mm

No 509W/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

No 514

3/4"

D 1/2" a

No 1162
No 1166
No 1167

0.6 x 3.5 mm
1.0 x 5.5 mm
1.2 x 8.0 mm

No 12201223

sizes 0; 1; 2; 3

No 1350
No 1356
No 1357
No 1358
No 1359

size M4
size M5
size M6
size M8
size M10

No 1410
No 1411
No 1412
No 1413
No 1414
No 1415
No 1416
No 1417
No 1418
No 1419
No 1420

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

'

'

210 tools, in TCS inlays (Tool Control System see page 55-69),
7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers (No 91P for 3.5 drawers).

'

'
'

Code

kg

'

97 83 08 00

22.9

'

2652.80

'

'

'

'

'

'

96 83 08 75

96 83 87 51
'

'

'

'

96 83 08 80

96 83 01 66

'

'

'

96 83 08 77

96 83 08 79

'

'

'

'

'

'

96 83 08 78

96 83 08 76

'

'

'

'

96 83 81 84

96 83 06 22

'

'

83 82 03 60

96 83 06 09
No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm

No 24

size 10 x 11 mm

10
'

'

'

'

'

'

308

1/2"

3/4"

a 80 mm
a 140 mm
1/2" a 140 mm
1/2" a 140 mm
1/2"

No 4820

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm

No 4830

sizes 1; 2; 3

No 4856

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30;


T40

'

'

'

'

96 83 06 03

96 83 81 77

96 83 06 07

96 83 07 06

96 83 06 08

96 83 06 04

'

No 65 01 5 180
'

No 65 29 5 200
'

No 65 64 2 250
'

No 65 72 6 240
'

No 66 02 5 160
'

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 40 mm

No 10960

500 g

'

'

'

'

'

'

96 83 06 22

No 12373
'

No 12600
'

500 g

No 12718

'

2500 TCS

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24; 27; 30;
32 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21;
19 x 22 mm

'

'

No 12931

3m

No 39 Pkw

400 mm

'

96 83 06 09
No 10

'

Workshop set for BMW vehicles

'

No 24

size 10 x 11 mm

No 40

a sizes 3; 5; 5.5; 6; 7; 8; 9; 10; 11;


12; 13; 14 mm

No 40L

1/4" a sizes 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10;


11; 12; 13 mm

No 41K

1/4"

No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4"

a, k sizes 1; 2; 3; 4

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2
No 405/4

1/4"
1/4"

D a 54 mm
D a 100 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 409

3/8"

D 1/4" a

No 456

a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

No 46

3/8"

'

285 tools, in TCS inlays (Tool Control System see page 55-69),
7x1/3, 1x2/3 and 4x3/3 inlays for 7 drawers (No 91P for 3.5 drawers).

'

'

Code

'

kg

'

97 83 06 00

23.7

'

3766.55

'

'

'

'

'

96 83 81 92

96 83 06 79
'

'

'

'

'

'

'

'

96 83 06 05

96 83 06 02

1/4"

a, r 0.6 x 3.5; 1.0 x 5.5;


1.2 x 8 mm

10

3/8"

a sizes 10; 11; 12; 13 mm


Continuation see next page
309

Special automotive tools


No 47
'

3/8" a sizes 10; 11; 12; 13; 14; 15;


16 mm

No 49
No 1049-9

3/8"
3/8"

a sizes 5; 6; 7 mm
a size 9 mm

No 49X

3/8"

a sizes M6; M8; M10

No 427/3

3/8"

D a 76 mm

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 435

3/8"

No 452

3/8"

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

D 3/8" a

No 52

1/2"

a sizes 10; 11; 12; 13; 14; 15; 16;

'

'

'

'

'

'

'

5/16"

No 3115/1

1/4"

No 4856

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 10766

sizes T6; T7

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

'

'

'

'

'

TORX controller

a sizes 8; 10; 12; 14; 17 mm

No 509QR/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509QR/10

1/2"

D a 255 mm (2x)

No 506

1/2"

D 300 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

No 514

3/4"

No 2309K

1/2"

No 12506

sizes 6; 7 mm

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18;


E20 x E24

No 40TX

1/4"

No 44KTXB

1/4" a sizes T10; T15; T20; T25; T27;


T30; T40

No 45TX

3/8"

a sizes E10; E12; E14

No 47TX

3/8"

a sizes E8; E10

'

No 49TX

3/8"

a size T40

'

No 50TX

1/2"

a sizes E11; E16; E18; E20; E24

'

No 54TX
No 54TXB

1/2"

'

'

'

'

'

'

'

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 4820

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.2 x 6.5 x 150 mm
1.6 x 10.0 x 200 mm
2.0 x 12.0 x 250 mm

No 4830
No 4840

sizes 1; 2; 3
size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

1/2"

'

size 1 (0.4 x 2.5 x 60 mm)

'

No 54
'

No 4628
'

17; 18; 19; 20; 21; 22; 24; 27; 30;


32 mm

'

DE

'

'

'

b size D8

No 736/40
'

'

'

'

No 65 01 5 180
'

1/2"

No 65 29 5 200
'

No 65 43 4 002
'

'

'

'

'

'

a sizes 17; 19 mm

a sizes E4; E5; E6; E7; E8

No 65 44 4 021
'

No 65 45 4 002
'

No 65 46 4 021
'

No 65 64 2 250
'

No 65 72 6 240
'

'

'

'

'

'

a sizes T45; T50; T55; T60


1/2" a sizes T30; T40; T45; T50

No 66 02 5 160
No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 40 mm

No 10960

500 g

'

'

No 409M

3/8"

D 1/4" a

No 415B

1/4"

No 1410
No 1411
No 1412
No 1413
No 1440
No 1441
No 1442
No 1443
No 1444
No 1445
No 1446
No 1427
No 1435

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40
size T25 (65 mm)
size T55

No PZ1221
No PZ1222
No PZ1223

size 1
size 2
size 3

'

'

10
'

'

310

'

'

No 12373
'

No 12600
'

500 g

No 12718
'

No 12922E
'

No 12931

3m

No 39 cars

400 mm

'

'

No 7756
'

2501N TCS

Workshop set for BMW motorbikes

No 407

1/4"

D a 38 mm

No 412

1/4"

ba

No 415

1/4"

No 456

a sizes 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22 mm

No 46
No 4600
No 4606

3/8"

No 49

3/8"

a sizes 5; 6; 8 mm

No 425

3/8"

D 165 mm

No 427/3

3/8"

D a 76 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

D 3/8" a

No 435

3/8"

No 52

1/2"

No 54

1/2"

a sizes 10; 12 mm

No 506

1/2"

D 300 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

'

'

'

214 tools, in TCS inlays (Tool Control System see page 55-69),
2x1/3, 2x2/3 and 5x3/3 inlays for 7 drawers (No 91P for 3.5 drawers).
'

'

Code

kg

'

97 83 06 06

23.3

'

2737.85

'

'

'

'

'

'

'

96 83 20 96

96 83 20 95
'

'

'

'

'

96 83 20 98

96 83 21 01

'

'

'

'

'

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 21; 22; 24; 27; 30; 32; 34 mm

sizes E6 x E8; E10 x E12

No 40TX

1/4"

No 44KTXB

a sizes T8; T10; T15; T20; T25;


T27; T30; T40

No 45TX

3/8"

a sizes E8; E10; E12; E14

No 49TX
No 54TX

3/8"

a sizes T25; T45


a sizes T40; T50; T55; T60

No 1054TX
No 2054TX

1/2"

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30;


T40

No 10769

sizes T9; T10; T15; T20; T25; T30; T40;


T45; T50

No 4621

size 0 (0.4 x 2.5 x 80 mm)


size 1 (0.5 x 3.5 x 90 mm)
size 2 (0.6 x 4.0 x 100 mm)
size 4 (1.0 x 6.5 x 140 mm)
size 5 (1.2 x 8.0 x 160 mm)

No 4631

sizes 1; 2

No 4632

sizes 1; 2; 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10506

0.8 x 4 x 300 mm

No 10518

1.0 x 5.5 x 410 mm

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 10768

sizes 2.5; 3; 4; 5; 6; 8; 10 mm

No 12507-2K

sizes 8; 10 mm

'

'

96 83 21 00

a size 20.8 mm-13/16"


a size 16 mm-5/8"
3/8" a size 18 mm-11/16"
3/8"

No 21TX
'

96 83 20 99

3/8"

'

'

'

a sizes E8; E10

1/4"

1/2"

1/2"

a sizes T50; T55


a sizes T40; T45

'

96 83 20 97

96 83 06 22
'

'

'

96 83 21 02

'

No 10
'

'

'

No 13

'

No 40
'

sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22; 23; 24;
27; 29; 30; 32; 34 mm
1/4" a sizes 4; 5; 5.5; 6; 7; 8; 9; 10; 11;
12; 13 mm

No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2
No 405/4

1/4"

D a 54 mm
D a 100 mm

'

'

'

'

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 21 x 22 mm

1/4"

'

'

'

'

'

10

Continuation see next page


311

Special automotive tools


No 65 01 5 180
'

No 65 29 5 200
'

No 65 34 5 280
'

No 65 35 5 200

96 83 81 79

'

96 83 06 08

No 65 43 4 001
No 65 43 4 002
'

No 65 45 4 001
No 65 45 4 002
'

No 65 72 6 240
'

No 66 02 5 160
'

96 83 06 09

No 102

150 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 2.5; 150 x 3; 150 x 4; 150 x 5;


150 x 6; 150 x 8 mm

'

'

'

'

96 83 04 50

No 10356

96 83 01 63

'

No 10670

285 mm

No 10672

20 x 315 mm

No 10957

O 40 mm

No 10960

300; 500 g

'

'

'

'

No 13

sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22; 23; 24;
27; 29; 30; 32; 34 mm

No 17

sizes 8; 9; 10; 11; 12; 13; 14; 15; 16;


17; 18; 19 mm

No 40

1/4" a sizes 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 415

1/4"

'

'

No 12374
'

No 12600
'

500 g

'

No 12900N

'

'

No 12922E
'

O 6 mm

'

'

No 12965N
'
'

5001 TCS

Workshop set for Ferrari

'

x
U

'

10760CV

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10; 12 mm

No 52

a sizes 10; 11; 12; 13; 14; 15; 16;


17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 54

1/2" a sizes 5; 6; 7; 8; 10; 12; 14; 17;


19 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 2309K

1/2"

a sizes 17; 19 mm

No 12506

sizes 6; 7 mm

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18;


E20 x E24

No 40TX
No 45TX

1/4"
3/8"

a sizes E4; E5; E6; E7; E8


a sizes E10; E12; E14

No 49TX

3/8"

a size T40; T45

No 50TX

1/2"

a sizes E16; E18; E20; E24

No 54TX

1/2"

a sizes T50; T55; T60

No 415SGB

1/4"

No 412

1/4"

b a (2x)

'

205 tools, in TCS inlays (Tool Control System see page 55-69),
7x1/3, 1x2/3 and 3x3/3 inlays for 6 drawers (No 91P for 3 drawers).
'

'

Code

kg

'

'

97 83 01 00

21.5

'

2719.70
'

'

'

'

'

'

96 83 20 96

96 83 07 06
'

'

'

'

10

96 83 06 49

96 83 81 77
'

'

'

'

'

96 83 81 76
312

96 83 81 75

1/2"

b 3/8" a

No 442

1/4"

No 1410
No 1411
No 1412
No 1413
No 1440
No 1441
No 1442
No 1443
No 1444
No 1445
No 1446
No 1427

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40
size T25 (65 mm)

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 10766

sizes T6; T7

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

'

'

'

'

3026N/1 TCS Tool set for Mercedes-Benz cars

279 tools, in TCS inlay (Tool Control System see page 55-69),
5x1/3, 5x2/3 and 3x3/3 inlays for 8 drawers (No 91P for 4 drawers).
'

Code

kg

'

97 83 00 08

26.6

'

96 83 01 67

96 83 02 17

96 83 02 18

96 83 01 63

96 83 81 79

96 83 03 23

96 83 11 68

96 83 02 26

96 83 01 64

96 83 01 65

3383.20

'

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 4820

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.2 x 6.5 x 150 mm
1.6 x 10.0 x 200 mm
2.0 x 12.0 x 250 mm

'

'

'

'

No 4830
No 4840

sizes 1; 2; 3
size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

'

No 65 01 5 180
'

No 65 29 5 200
'

No 65 43 4 002
'

No 65 44 4 021
'

No 65 45 4 002
'

No 65 46 4 021
'

No 65 64 2 250
'

No 65 51 6 240
'

No 66 02 5 160
'

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 40 mm

No 10960

500 g

'

'

'

'

'

'

No 12373
'

No 12600
'

500 g

No 12718

10

'

No 12922E

O 6 mm

No 12931

3m

No 39 Pkw

400 mm

'

'

'

No 7756
'

96 83 01 66

96 83 02 19

Continuation see next page


313

Special automotive tools


No 54

1/2" a sizes 5; 6; 7; 8; 10; 12; 14; 17;


19 mm

No 55

3/4"

a size 36 mm

No 2309K

1/2"

a sizes 17; 19 mm

No 12506

sizes 6; 7 mm

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18;


E20 x E24

No 40TX

1/4"

No 44KTXB

a sizes T10; T15; T20; T25; T27;


T30; T40

No 45TX

3/8"

a sizes E10; E12; E14

No 47TX

3/8"

a sizes E8; E10

No 49TX

3/8"

a size T40

No 49X

3/8"

a sizes M6; M8; M10

No 50TX

1/2"

a sizes E11; E16; E18; E20; E24

No 54TX
No 54TXB

1/2"
1/2"

a sizes T45; T50; T55; T60


a sizes T30; T40; T45; T50

No 409M

3/8"

D 1/4" a

No 415SGB

1/4"

No 1410
No 1411
No 1412
No 1413
No 1440
No 1441
No 1442
No 1443
No 1444
No 1445
No 1446
No 1427

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40
size T25 (65 mm)

No PZ1221
No PZ1222
No PZ1223

size 1 (2x)
size 2 (2x)
size 3

No 3115/1

1/4"

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 10766

sizes T6; T7

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30;


T40

'

'

'

'

'

'

96 83 02 27
No 10
'

No 13
'

No 20
'

No 21
'

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24 mm

'

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 27 x 32; 30 x 34 mm

No 24

sizes 10 x 11; 12 x 14 mm

No 40

1/4" a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 41K

1/4"

'

'

'

'

'

'

'

'

'

a, r 0.6 x 3.5; 1.0 x 5.5;

1.2 x 8 mm

'

No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4"

a, k sizes 1; 2; 3; 4

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

No 409

3/8"

D 1/4" a

No 412

1/4"

ba

No 415

1/4"

No 456

3/8"

a sizes 7; 8; 9; 10; 11; 12; 13; 14;

'

'

'

'

'

'

'

'

'

'

15; 16; 17; 18; 19; 20; 21; 22 mm

'

No 427/3

3/8"

D a 76 mm

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

D 3/8" a

No 432

1/2"

D 3/8" a

No 435

3/8"

No 50

1/2"

a sizes 8; 9; 10; 11; 12; 13; 14; 15;

'

'

'

'

'

'

'

16; 17; 18; 19; 30 mm

'

No 52
'

1/2" a sizes 12; 17; 18; 19; 20; 21; 22;


24; 25; 27; 30; 32 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 513

3/8"

D 1/2" a

No 514

3/4"

D 1/2" a

'

'

10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32; 34 x 36 mm

'

'

'

'

'

'

'

'

'

'

314

DE

'

TORX controller

'

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
size 6 (1.6 x 10.0 x 200 mm)
size 7 (2.0 x 12.0 x 250 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

size 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

'

'

'

'

'

'

'

a sizes E4; E5; E6; E7; E8

1/4"

'

'

No 65 01 5 180
'

No 65 29 5 200
'

No 65 51 6 240
'

No 65 64 2 175
'

No 66 02 5 160
'

No 102

200 mm

No 103

150 mm

No 105

120 x 10 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8; 200 x 8 mm

No 10672

20 x 315; 25 x 365 mm

No 10957

O 40 mm

No 10960

500; 800 g

'

'

'

'

'

'

'

96 83 02 21

96 83 11 79

96 83 01 77

96 83 01 78

96 83 01 65

96 83 01 66

No 12377
'

No 12600
'

3000 g

No 12718
'

3022N/1 TCS Tool set for Mercedes-Benz HGVs

308 tools, in TCS inlay (Tool Control System see page 55-69),
6x1/3, 2x2/3 and 7x3/3 inlays for 11 drawers (No 91P for 6 drawers).
'

Code

kg

'

97 83 00 09

47.3

'

4393.30
96 83 02 20
No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32; 34 x 36 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24; 27; 30; 32;
34 mm

No 14

size 24 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm

No 21

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 27 x 32; 30 x 34 mm

'

96 83 01 67

96 83 02 17
'

'

'

96 83 02 18

96 83 01 72
'

No 24

sizes 10 x 11; 12 x 14 mm

No 40

a sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12;


13; 14 mm

No 41K

1/4" a, r 0.6 x 3.5; 1.0 x 5.5;


1.2 x 8 mm

No 44K

1/4"

a, E 3; 4; 5; 6; 8 mm

No 44P

1/4"

a, k sizes 1; 2; 3; 4

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/2

1/4"

D a 54 mm

No 405/6

1/4"

D a 150 mm

No 407

1/4"

D a 38 mm

'

'

96 83 02 25

96 83 81 79

'

'

'

'

'

'

'

96 83 02 22

96 83 03 24
'

1/4"

10

Continuation see next page


315

Special automotive tools


No 409

3/8"

D 1/4" a

No 412

1/4"

ba

No 415

1/4"

No 456

3/8" a sizes 7; 8; 9; 10; 11; 12; 13; 14;


15; 16; 17; 18; 19; 20; 21; 22 mm

No 427/3

3/8"

D a 76 mm

No 427/5

3/8"

D a 125 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 431

1/4"

3/8"

No 432

1/2"

3/8"

No 435

3/8"

No 50

a sizes 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 30 mm

No 52

a sizes 12; 17; 18; 19; 20; 21; 22;


24; 25; 27; 30; 32 mm

No 504/15

1/2"

D 397 mm

No 506

1/2"

D 300 mm

No 509/2

1/2"

D a 52 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm (2 x)

No 510

1/2"

D a 71 mm

No 512

1/2"

No 54

1/2"

a sizes 5; 6; 7; 8; 10; 12; 14; 17;

'

'

'

'

'

'

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 10766

sizes T6; T7

No 10771/8

sizes T9; T10; T15; T20; T25; T27; T30;


T40

'

'

'

TORX controller

'

'

'

'

'

'

'

'

'

'

'

'

'

'

'

a
a

1/2"

19 mm

'

a sizes 24; 27 mm

No 51IMP

1/2"

No 2309
No 2309K

1/2"

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18;


E20 x E24

No 40TX

1/4"

a sizes E4; E5; E6; E7; E8

No 44KTXB

1/4"

a sizes T10; T15; T20; T25; T27;

'

'

'

'

a size 22 mm
1/2" a sizes 17; 19 mm

No 552

3/4"

No 556

3/4"

No 559/8
No 559/16

3/4"

D a 200 mm
D a 400 mm

'

'

'

3/4"

No 558

510 mm

No 568

1/2"

No 4620

size 1 (0.6 x 3.5 x 75 mm)


size 2 (0.8 x 4.0 x 100 mm)
size 4 (1.2 x 6.5 x 150 mm)
size 5 (1.6 x 8.0 x 175 mm)
size 6 (1.6 x 10.0 x 200 mm)
size 7 (2.0 x 12.0 x 200 mm)

No 4628

size 1 (0.4 x 2.5 x 60 mm)

No 4630

sizes 1; 2; 3

No 4632

size 4

No 4640

sizes 0; 1; 2

No 4660 VDE

size 1 (0.4 x 2.5 x 75 mm)

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734
No 4744

size 2
size 1

No 10760CV

sizes 12; 14; 17; 19; 22 mm

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

'

'

'

'

'

'

'

'

'

'

'

D 3/4" a

No 65 01 5 180
'

T30; T40

'

3/4" a sizes 22; 24; 27; 30; 32; 34; 36;


38; 41; 46; 50 mm

'

1/2"

No 55

No 65 29 5 200
'

No 45TX

3/8"

a sizes E10; E12; E14

No 49TX

3/8"

a size T40

No 49X

3/8"

a sizes M6; M8; M10

'

No 50TX

1/2"

a sizes E11; E16; E18; E20; E24

'

No 54TX
No 54TXB

1/2"
1/2"

a sizes T45; T50; T55; T60


a sizes T30; T40; T45; T50

No 409M

3/8"

D 1/4" a

No 415SGB

1/4"

No 1410
No 1411
No 1412
No 1413
No 1440
No 1441
No 1442
No 1443
No 1444
No 1445
No 1446
No 1427

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40
size T25 (65 mm)

No PZ1221
No PZ1222
No PZ1223

size 1 (2x)
size 2 (2x)
size 3

No 3115/1

1/4"

'

'

'

'

'

'

'

No 65 51 6 240
'

No 66 02 5 160
No 102

200; 300 mm

No 103

175 mm

No 105

120 x 12 mm

No 108

150 x 3; 150 x 4; 150 x 5; 150 x 6;


150 x 8 mm

No 10957

O 50 mm

No 10960

500; 800; 1000 g

No 11006
No 11007

400 mm
400 mm

No 12025

210 mm

No 12036

260 mm

'

'

'

'

10
'

'

'

316

DE

'

'

'

'

No 12374
'

No 12600
'

3000 g

No 12718
'

No 12931
'

3m

1100 TCS

Tool set for Porsche

No 409M

3/8"

D 1/4" a

No 415

1/4"

No 45

a sizes 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19 mm

No 46

3/8"

a size 20.8 mm-13/16"

No 49

3/8"

a sizes 4; 5; 6; 7; 8; 10 mm

No 425

3/8"

D 165 mm

No 427/3

3/8"

D a 76 mm

No 427/10

3/8"

D a 240 mm

No 428

3/8"

D a 46 mm

No 432M

1/2"

D 3/8" a

No 435

3/8"

No 50

a sizes 19; 21; 22; 24; 27; 30;


32 mm

No 52

1/2" a sizes 16; 17; 18; 19; 22; 24; 27;


30; 32 mm

No 54

1/2"

a sizes 6; 7; 8; 10 mm

No 54X

1/2"

a sizes M6; 8; 12; 14

No 506

1/2"

D 300 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 514M

3/4"

D 1/2" a

No 21TX

sizes E6 x E8; E10 x E12; E14 x E18;


E20 x E24

No 40TX
No 45TX

1/4"
3/8"

a sizes E4; E5; E6; E7; E8


a sizes E10; E12; E14

No 50TX

1/2"

a sizes E11; E16; E18; E20; E24

No 54TX

1/2"

a sizes T45; T50; T55; T60

No 1410
No 1411
No 1412
No 1413
No 1440
No 1441
No 1442
No 1443
No 1444
No 1445
No 1446
No 1427

size T6
size T7
size T8
size T9
size T10
size T15
size T20
size T25
size T27
size T30
size T40
size T25 (65 mm)

No 415SGB

1/4"

No 4650

sizes T6; T7; T8; T9; T10; T15; T20; T25;


T27; T30

No 10766/9

sizes T8; T9; T10; T15; T20; T25; T27;


T30; T40

No 4622

size 1 (1.0 x 5.5 x 100 mm)


size 2 (1.2 x 6.5 x 125 mm)
size 4 (1.6 x 10.0 x 175 mm)
size 5 (2.0 x 12.0 x 200 mm)

No 4630

size 1

No 4632

size 3

No 4724

size 2 (1.0 x 5.5 x 25 mm)

No 4734

size 2

No 10760CV/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

'

'

228 tools, in TCS inlays (Tool Control System see page 55-69),
1x1/3, 1x2/3 and 5x3/3 inlays for 6 drawers (No 91P for 3 drawers).

'

'
'

Code

'

kg

'

97 83 04 11

24.7

'

2984.35

'

'

'

'

'

'

96 83 01 92

96 83 01 93

'

'

'

'

'

'

96 83 01 94

96 83 01 98

'

'

'

'

'

96 83 11 96
'

'

96 83 01 97

'

96 83 01 95
No 12

sizes 5.5; 12; 14 mm (2x)

No 13

sizes 7; 11 mm (2x);
sizes 6; 8; 9; 10; 12; 13; 14; 15; 16; 17;
18; 19; 20; 22; 24; 30; 32; 36 mm (1x)

No 14

size 17 mm

No 20

sizes 10 x 11; 12 x 13; 14 x 15;


17 x 19; 19 x 22 mm

'

'

'

'

No 23

'

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 23; 24 x 27; 30 x 32 mm

No 24

sizes 8 x 10; 11 x 13; 12 x 14; 17 x 19;


22 x 24 mm

No 29

sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15;


16 x 17; 18 x 19; 20 x 22 mm

No 40

1/4"

'

'

a sizes 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9;

10; 11; 12; 13 mm

'

No 44
'

1/4"

a sizes 3; 4; 5; 6 mm

'

'

'

No 400

1/4"

D 150 mm

No 404

1/4"

D 116 mm

No 405/6

1/4"

D a 150 mm

'

'

No 407
'

1/4"

D a 38 mm

1/2"

'

'

'

'

'

'

3/8"

'

'

10

Continuation see next page


317

Special automotive tools


No 65 01 6 180
'

No 65 43 4 002
'

No 65 45 4 002
'

No 65 46 4 021
'

96 83 02 55
No 65 51 6 240

'

96 83 02 57
No 10

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm

No 13

sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 21; 22; 24 mm

No 20

sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;


14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 23; 24 x 26; 25 x 28; 27 x 32 mm

No 46

3/8"

a size 20.8 mm-13/16"

No 422

3/8"

No 50

1/2"

a sizes 8; 9; 19; 30 mm

No 51

1/2"

a size 27 mm

No 52

a sizes 10; 11; 12; 13; 14; 15;


16; 17; 18; 19; 20; 21; 22; 24; 27; 30;
32 mm

No 54

1/2"

a sizes 12; 17 mm

No 1054/8K
No 1054/10

1/2"
1/2"

a 120 mm
a 140 mm

No 2054X/M10
No 3054X/M12

1/2"
1/2"

a 110 mm
a 140 mm

No 509/5

1/2"

D a 130 mm

No 509/10

1/2"

D a 255 mm

No 509W/2

1/2"

D a 52 mm

No 509W/5

1/2"

D a 130 mm

No 510

1/2"

D a 71 mm

No 512

1/2"

No 4724

size 2 (1 x 5.5 x 25 mm)

No 4734

size 2

No 4820

0.6 x 3.5 x 75 mm
0.8 x 4.0 x 100 mm
1.0 x 5.5 x 125 mm
1.2 x 6.5 x 150 mm
1.6 x 8.0 x 175 mm

No 4830

sizes 1; 2; 3

No 10767/9

sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

No 66 02 6 160
'
'

No 100

150 mm

No 103

150 mm

No 104

120 x 4; 120 x 6 mm

No 105

120 x 12 mm

No 108

150 x 4 mm

No 10670

265 mm

No 10940

O 55 mm

'

'

'

'

'

'

'

'

'

'

'

'

No 10955
'

O 35 mm

'

No 10960

300; 500 g

No 11095/20

20 blades 0.051 mm

'

'

'

'

No 12005
'

No 12036
'

'

260 mm

No 12321

'

'

'

No 12905
'

'

No 12931
'

3m

'

'

1000 TCS

Tool set for Volkswagen

'

'

'

109 tools, in TCS inlays (Tool Control System see page 55-69),
2x1/3, 2x2/3 and 2x3/3 inlays for 4 drawers (No 91P for 2 drawers).

'

'

Code

kg

'

'

97 83 02 00

16.1

'

1457.35
'

'

1/2"

No 65 29 6 160
'

No 65 51 6 240
'

96 83 03 53

96 83 02 58

No 66 00 6 180
'

No 102

125 mm

No 104

120 x 2 mm

No 105

100 x 10 mm

No 108

115 x 2; 150 x 2.5; 150 x 6;


200 x 8 mm

'

'

'

'

10

No 1023
'

No 10957

O 35 mm

No 10960

500 g

'

'

96 83 03 51

96 83 02 56

No 12717
'

No 12718
'

318

Special tools for cars

54TX-T20

Special tools for carburettors


r Screwdriver

10503

Screwdriver Bit

for inside TORX screws, size T20,


1/2" a-drive, use on mounting screws for
choke-switch on choke-flap L-Jetronic.
'

for adjusting slotted screws,


matt chrome, black tip.

Code

Type

03 10 00 20

BMW

'

'

71

11.30

'

Code

L
mm

Blade
mm

R
g

73 21 01 01

365

0.8 x 5.0 x 260

100

10

'

'

540-22
8.20

r Screwdriver

10506

for setting correct CO-valve on


mixture screen, idling mixture on
Pierburg carburettors:
BMW, Ford, Opel, Peugeot, Renault, Mercedes-Benz cars.
Choke adjustment Audi 80, VW Passat 1.3-1.5; 1.6 l,
matt chrome, black tip.

'

Type

02 20 00 22

BMW: series 3, 518, 520

'

513
1/2"

Code

L
mm

Blade
mm

R
g

73 01 00 01

350

0.8 x 4.0 x 300

53

10

'

Code
'

'

'

CROW-FOOT spanner

size 22 mm, 3/8" a-drive, on through-flow jet


of 2B4-carburettor, for use with adaptor No 513.

64

41.60

Adaptor

socket x 3/8" plug.

11.40
'

10507N KK

i Screwdriver

for hexagon socket head screws,


size 3 mm,
for mixture regulation on distributor of K-Jetronic: VW-Audi,
Mercedes-Benz, Porsche 924, Ford and BMW, matt chrome, black tip.

Code

L
mm

R
g

73 10 10 03

385

56

'

13 03 00 02

BMW: series 3, 518, 520

'

1062

Type

03 83 00 27

BMW: M 21: E30 = 324td, E28 = 524td,


E34 = 524td, M 51: E36 = 325td, E34 = 525tds

'

1023

Code

L
mm

Blade
mm

R
g

73 21 01 02

525

1.0 x 5.5 x 410

159

10

11085

9.85

Socket

Code
'

'

'

'

for adjustment (slotted screws),


matt chrome, black tip.

'

55

11.80

r Screwdriver

10518

Type

'

bi-hexagon, AS-drive, size 27 mm,


1/2" a-drive, for diesel injectors.

'

'

Code

10.70

Jet reamers

255

46.10

Special ring spanner

single ended, angled, size 13 mm,


use on mounting screws
of injection pump.

'

16 pieces in case (0.33; 0.4; 0.45; 0.5;


0.6; 0.7; 0.75; 0.8; 0.9; 1.0; 1.1; 1.2; 1.4;
1.6; 1.8; 2.0 mm), with holder.

Code

Type

41 11 00 13

Citron: all diesel


VW/Audi: Audi 80 L, CL, GL, CD,
Golf, Jetta, Caddy, Passat

'

'

67

15.50

'

Code

'

74 31 00 01

27

'

12504

51-27

S
10

37.20

Bit holder with inside hexagon

for all screwdriver bits,


flexible shaft, for adjustment.

'

Code

Type

03 02 00 27

Mercedes-Benz

'
'

Code

L
mm

inside
a"

Blade
mm

R
g

18 10 10 16

260

1/4

150

168

10

'

'

Socket

extra deep, bi-hexagon, size 27 mm,


1/2" a-drive, for injection nozzles on diesel
car engines.

'

R
g

294

21.60

17.30

319

10

Special automotive tools


51-30

Socket

11066

size 30 mm, for injectors.

Valve spring lifters

bright nickel-plated.

'

Code

Type

03 02 00 30

Mercedes-Benz

'

'

3000

341

21.90

Socket

multi-spline, 1.5 x 58 mm, 1/2" a-drive,


for use on pre-chamber with indirect injection.

'

Code

size

Clamp. width
mm

74 12 20 01
74 12 20 03

1
2N

75225
120280

'

'

Code

Type

03 39 00 01

Mercedes-Benz diesel

'

'

3505

'

185

10

42.80

Special extension

11066R

Jaws
(2 pieces)
11066R/1
11066R/3 + R/4

1200
3214

1
1

73.00
133.00

Spare jaws

for No 11066, 2 each, hardened,


nickel-plated.

'

Code

size

shape

for No

79 12 01 01
79 12 01 02
79 12 02 01
79 12 02 02

1
2
3
4

straight
bent
straight
bent

11066/1
11066/1
11066/2
11066/2

'

'

Code
'

13 21 00 01
'

1054-13

186

'

R
g

120
120
103
114

1
1
1
1

14.50
14.50
14.50
14.50

23.20

11068

Piston ring compressors

made of spring steel,


stepless adjustment c/w hexagon key wrench.

INHEX socket

for hexagon socket head screws, size 13 mm,


length, 70 mm, 1/2" a-drive,
for use on brass air-cooled injector nozzles.

'

Code

size

Clamp. width
mm

Height
mm

R
g

74 14 00 00
74 14 00 01
74 14 00 03
74 14 00 05

0
1 1)
2
3

4075
57125
90175
90175

50
80
80
165

105
230
270
603

1
1
1
1

'

Code

Type

03 15 07 13

VW/Audi: for engines


with fuel injection

'

'

130

'

25.00

'

19.00
30.80
37.70
70.50

) Fiat-No A 60 605
(Type 126, 127, 128, X 1/9, 130, 131, 132, 850T, 238)

'

Special tools for valves and pistons


11063

11069

Piston ring pliers

for mounting and removing piston


rings, bright nickel-plated.

Valve seating-ring pliers

for pulling valve stem seals and


removal of valve spring base on
VW-Audi engines with overhead
camshaft i.e. Golf, Passat, Audi 80,
Audi 100, BMW and Mercedes-Benz, bright nickel-plated.
'

Code

L
mm

R
g

74 29 00 01

250

340

'

'

11063/1

10

'

41.70

Valve seating-ring pliers

for extracting poorly accessible valve


shaft seals, e.g. in four-valve engines.
Joint and jaws made of gun-finished
hardened sheet steel.Handles made of
nickel-plated shaped sheet steel.

L
mm

R
g

74 15 20 01
74 15 20 02
74 15 20 03
74 15 20 05

1 1)
2
3
5 2)

50100
80120
110160
60160

200
240
240
220

245
279
394
194

1
1
1
1

'

R
g

74 29 00 02

270

330

48.30

27.80
29.70
34.10
35.90

) Fiat-No A 60 182 (Type 126, 127, 133, 850T)


) with V-shaped contact faces for safe and positive manipulation of piston
rings

L
mm

320

for piston rings


mm

Code
'

size

'

'

'

'

Code

1109511097 Precision feeler gauges

732/10-10

DIN 2275, DIN EN 10140,


nickel-plated case, tapered blades.

Ring insert tool

size 10 mm, valve adjustment,


tightening torque 812 N m.

'

'

Type

58 22 10 10

BMW: all except Diesel

'

L R
mm g
S

Code

No

Sizes

74 24 00 01

11095/13

74 24 00 02

11095/20

74 24 00 05

11097/26

0.05; 0.10; 0.15; 0.20; 0.25; 0.30; 0.40;


0.50; 0.60; 0.70; 0.80; 0.90; 1.00 mm 100 61
0.05; 0.10; 0.15; 0.20; 0.25; 0.30; 0.35;
0.40; 0.45; 0.50; 0.55; 0.60; 0.65; 0.70;
0.75; 0.80; 0.85; 0.90; 0.95; 1.00 mm 100 95
1 1/2; 2; 2 1/2; 3; 4; 5; 6; 7; 8; 9; 10; 11;
12; 13; 14; 15; 16; 17; 18; 19; 20; 21;
22; 23; 24; 25/1000"
100 80

'

'

10

'

1054-10

6.65

10

10.20

10

12.40

Valve spring tool

S
1

30.40

INHEX socket

'

Code

Type

03 15 14 10

Mercedes-Benz

'

incorporating 2 clamping and


2 compression facilities which are
interchangeable, suitable for most
car engines, some without
removing cylinder head.

44

for hexagon socket head screws,


size 10 mm, length 140 mm,
1/2" a-drive, for cylinder head bolts.

'

12108

Code

3054X-M10

150

11.40

Screwdriver BIT

for tri-square socket head screws


(XZN), size M10, length 140 mm,
1/2" a-drive, for cylinder head bolts
and drive shaft bolts.

'

Code
'

74 57 00 01
'

780

'

92.50
Type

03 26 14 10

Mercedes-Benz

'

12705

Motor mechanics stethoscope

Code
'

steel probe, plastic handle and


sound tubes.

3054X-M12

142

15.70

Screwdriver BIT

size M 12, for cylinder head bolts,


with tri-square socket head M 12.
'

Code
'

74 06 00 01
'

'

137

65.00

Code

Type

03 26 14 12

Mercedes-Benz

'

'

12731

Valve grinding tools

3004

with suction cap.

mm

R
g

74 05 00 20
74 05 00 25
74 05 00 30
74 05 00 37

20
25
30
37

58
54
66
65

5
5
5
5

'

'

4.85
4.85
5.00
5.50

Socket

Type

01 01 00 03

BMW: X6 model E71,


7 Series model F01/F02

'

Code

Type

03 23 00 12

Mercedes-Benz

54CV/9

'

'

R
g

10

15.60

Screwdriver BIT

'

hexagon, size 3 mm, 1/4" a-drive,


for releasing and tightening screws on
the expansion valve.

Code

'

'

40-3

for tri-square socket head screws


(XZN), size M12, length 55 mm,
1/2" a-drive, for cylinder head bolts.

'

Code

160

5.00

75

22.30

Set: Screwdriver sockets

for spline socket head screws


(Ribe-CV),
for brakes and cylinders head
bolts.
Content:
M5; M6; M7; M8; M9; M10; M12;
M13; M14

10
'

Code

Type

96 03 09 01

Fiat, Alfa

'

'

R
g

1420

136.35

321

Special automotive tools


54CV

Screwdriver sockets

513

for spline socket head screws (Ribe-CV),


length 60 mm, 1/2" a-drive,
for brakes and cylinder head bolts.

1/2"

'

Adaptor

socket x 3/8" plug.

'

Code

size

Type

03 09 00 07
03 09 00 08
03 09 00 09
03 09 00 10

M7
M8
M9
M10

Fiat
Fiat
Fiat (1.2 l; 8V/16V)
Fiat (1.2 l; 8V/16V)

'

03 09 00 12
03 09 00 13
03 09 00 14
03 09 00 16

M12
M13
M14
M16

Fiat (2.0 l)
Fiat, Alfa (e.g. 1.6 l; 16V)
Alfa (e. g. 1.6 l; 16V)
Alfa (e. g.1.6 l; 16V)

'

R
g

78
78
92
95

5
5
5
5

119
123
126
163

5
5
5
5

Code

Type

13.40
10.50
14.60
11.70

13 03 00 02

BMW: series 3, 518, 520

12.30
17.30
14.40
15.60

for inside TORX screws, size T25; 1/4" E-drive,


for screws on sun roof E30.

'

'

1417

Code

Type

08 13 00 25

BMW

Special tools for chassies and steering


Socket

3054X-M10

'

01 27 00 08

BMW

'

24-17x19

10

10

Type

03 26 14 10

Mercedes-Benz

BMW

'

142

15.70

Internal puller

'

'

41 08 17 19

3.20

capacity 2736 mm, for taper roller bearing


outer ring on steering housing, to be used
with counter stay No 11061-2.

Code

Type

71 16 00 13

Mercedes-Benz

'

'

10

Code

11060-3
6.00

OPEN-RING spanner

Type

Screwdriver BIT

'

bi-hexagon, size 17 x 19 mm,


use on wingpump manifold
(hydro-steering).

Code

'

'

Type

9.85

for tri-square socket head screws


(XZN), size M10, on drive shaft
bolts.

for external TORX screws, size E 8, 1/4" a-drive,


for steering lock screws.

'

BIT

'

Code

'

'

40TX-E8

55

'

151

10

11061-2

19.10

365

57.00

Counter stay with reduction unit

for taper roller bearing outer ring on steering housing.

55-36

Socket

hexagon, size 36 mm, 3/4" a-drive,


use on vibration damper.

'

'

Type

71 17 00 12

Mercedes-Benz

'

Code

Type

05 01 00 36

BMW: series 5, 6 and 7,


except 518-520i

'

'

540-22

386

Code
'

18.60

CROW-FOOT spanner

size 22 mm, 3/8" a-drive,


use on track-rods.

46-19

1500

70.50

Socket

Fiat-No A 57 052
extra deep, bi-hexagon, size 19 mm,
3/8" a-drive, for front mounting screw of top
steering link on front wheel suspension.
'

Type

02 02 00 19

Fiat: 1500, 125

'
'

Code

Type

02 20 00 22

BMW: series 3, 518, 520

'

10

'

Code
'

64

12495

41.60

112

10

17.00

Brass punch

20 mm, length 200 mm,


for use on bushes bearing rings,
steering pivot pin.
'

Code

Type

77 13 00 00

VW/Audi

'

'

322

R
g

533

21.10

Special tools for ignition


and electrics
3466
3/8"

51
1/2"

Spark plug socket

a-drive, with magnet, outside dia 25.5 mm,

'

for deep seated plugs.

Code
'

03 02 02 16
03 02 02 08

'

Code
'

02 14 00 36

mm/"

L
mm

R
g

16-5/8

85

198

'

4600
3/8"

Spark plug sockets

a-drive, with rubber insert.

mm/"

L
mm

R
g

16-5/8
20.8-13/16

83
83

137
194

10
10

'

31.80

51S
1/2"

Spark plug socket

18.80
21.00

Spark plug socket

a-drive, with rubber insert.

a-drive, with rubber insert.


'

Code
'

'

Code
'

02 12 00 36

mm/"

L
mm

R
g

16-5/8

60

88

10

'

4606
3/8"

03 24 02 08

mm/"

L
mm

R
g

20.8-13/16

83

196

10

'

15.20

5100

22.40

Rubber insert

for size 20.8 mm


(No 46; 51; 51S).

Spark plug socket

a-drive, with rubber insert.


'

Code

'

'

Code
'

02 13 00 18

mm/"

L
mm

R
g

18-11/16

65

132

10

'

1042
3/8"

09 01 00 01
'

15.40

10626

1.25

Spark plug connector pliers

forged, with 45 offset, curved jaws,


for extracting and replacing
sparkplug connectors.

Tubular spark plug socket

a-drive.

'

Code
'

02 23 00 16

mm/"

L
mm

R
g

16-5/8

270

203

'

'

23.50

Code

L
mm

R
g

76 53 00 01

195

223

'

'

1043

34.20

Tubular spark plug sockets

a-drive, extra long, with rubber insert,


for deeply recessed, difficult-to-reach
spark-plugs with M12 x 1.25 mm threads.
Citron: C5 with engine 2.0 l HPI
Peugeot: 406 HPI
Renault: Twingo, Clio, Kangoo with engine 1.2 l, 16V

3/8"

'

Code

No

mm

L
mm

R
g

02 23 00 14
02 23 10 14

1043
1043/1

14
14

90
250

52
144

1
1

'

'

46
3/8"

16.70
20.90

Spark plug socket

a-drive, with rubber insert.

12375

Spark plug brush

wood, brass wire dia 0.15 mm.


'

Code
'

02 02 02 08
'

mm/"

L
mm

R
g

20.8-13/16

65

151

10

'

16.30

Code

L
mm

Rows

74 16 00 01

150

3x5

'

'

R
g

18

10

1.75

323

10

Special automotive tools

Tools for heater plugs


25GK

7756

Testing unit for electric and


electronic car components,
348 volt, 2 LEDs to indicate
voltage and plus or minus pole,
complete in Pc-bag.
Content:
1 basic unit with 1.5 m cable,
testing tip, integrated mechanical sliding needle,
1 crocodile terminal,
1 jaw clamp

Ratchet ring spanner

angled, extra long,


for hard-to-reach heater plugs
(e.g. BMW, Mercedes-Benz, Peugeot,
Renault, Seat, VW/Audi), size 8 mm for contact rail bolts,
size 12 mm for diesel heater plugs, chrome plated.
'

Code
'

41 18 08 12
'

mm

L
mm

R
g

8 x 12

255

156

Automotive voltage tester


(complete set)

47.40
'

3047

Spark plug sockets

Code
'

extra long,
for hard-to-reach heater plugs,
3/8" a-drive, size 10 mm
e.g. for Renault, VW/Audi TDi;
size 12 mm e.g. for BMW,
Mercedes-Benz (201, 202 four-valve technology),
Ford, Opel, Renault.

77 56 00 01
'

7755

85

51.50

Crocodile terminal

'

Code
'

02 18 00 10
02 18 00 12

mm

L
mm

R
g

10
12

140
140

138
138

1
1

'

'

39.00
39.00

'

77 55 00 01
'

10627

Heater plug socket pliers

forged, curved jaws with milled grip,


for accessing tight-fitting, awkwardto-reach heater plug connectors
(e.g. BMW, Mercedes-Benz, Peugeot,
Renault, Seat, VW/Audi).
'

Code

L
mm

R
g

76 53 00 04

220

262

'

'

46-12

54.50

Socket

extra deep, bi-hexagon, size 12 mm,


3/8" a-drive, use on glow plugs of diesel engines.

'

Code

Type

02 02 00 12

BMW: 324d; 524d

'

'

57

10

13.70

Testing tools for car electrics


12905

Car circuit tester

for car electrics 612 volt and


24 volt, with pointed probe,
cover cap, connecting lead with
alligator clip.
'

10

Code

Code

L
mm

R
g

77 38 00 01

120

73

10

'

'

324

8.00

R
g

12

8.35

Special tools for brakes


and wheels

e Socket

51S

P Q

extra deep, DIN 3124/ISO 2725-1, E DIN EN 3710, E DIN EN 3709


(test loads), with rubber insert for spark plugs and for tightening and
untightening wheel nuts on Japanese cars, HPQ high performance steel,
chrome plated.

ES 721/15/3/2

530 x 350 x 40 mm, 6 pieces


'
'

Code

Code

'

96 83 81 72

'

5012

'

1/2"

No 721/15

30150 N m

'

03 24 02 08 20.8-13/16
'

1/2"

d1 d2 d3 L
t1 t2
mm mm mm mm mm mm

27.7 26

196

20

83

22 66.2

S
10 22.40

c IMPACT sockets

2309

a sizes 17; 19; 20.8 mm-13/16"

No 2309K
'

563.00

mm/"

a-drive, for power drivers, extra deep, with reduced outside diameter,

Chrome Alloy Steel, gunmetal finish.


No 35c cars

17; 19; 22; D 1/2"

No 10599/2

245 mm

'

'

83 81 20 87
'

Empty tray

299

23.70
'

Wheel braces
DIN 3119/ISO 6788,
forged centre section, pressed-in
extension arms with extra deep
forged socket heads,
Chrome Alloy Steel, chrome plated.

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

23 09 00 17
23 09 00 19
23 09 02 08
23 09 00 22

17
19
20.8
22

25.7
28.2
30.7
32

30
30
30
30

85
85
85
85

68
67.5
66.5
66.5

242
257
272
311

5
5
5
5

'

'

27.50
27.50
30.70
30.70

for wheel nuts


'

c Wheel nut sockets

2309K

with plastic sleeve.


Sleeve extension protects not only
wheel bolts and nuts but also the
wheel and holes.
'

Code
'

43 03 00 06
43 03 00 05

No
35c cars
34c HGVs

'

mm/"

17; 19; 22; D


24; 27; 32; D

1/2"
3/4"

L
mm

R
g

400
700

2058
5053

1
1

'

95.50
148.00

Tyre levers

Code
'

23 09 10 17
23 09 10 19
23 09 12 08
'

Handy, sturdy construction,


purposefully shaped,
Chrome Alloy Steel.

10599/2

a
"

L
mm

mm

R
g

17
19
20.8

1/2
1/2
1/2

87
87
87

32
32
32

242
250
265

1
1
1

mm

34.70
36.30
36.00

Balance weight pliers

with cutter for cutting and


trimming lead weights
(with or without adhesive foil),
Chrome Vanadium, chrome plated.

'

Code

No

L
mm

R
g

74 01 04 00
74 01 06 00
74 01 06 02
74 01 06 03

39 cars
39/1 HGVs
39/2 HGVs
39/3 HGVs

400
600
600
600

383
897
1172
915

5
5
5
5

'

'

'

26.30
37.20
29.20
26.40

Code

L
mm

R
g

76 29 40 03

245

319

'

'

10613

55.50

Brake spring pliers

for rivetted brake linings/shoes,


Chrome Vanadium,
bright nickel-plated.

10

'

Code

L
mm

R
g

76 41 30 01
76 41 30 02

210
330

245
380

6
6

'

'

27.00
34.70
325

Special automotive tools


10613/1

Brake spring pliers

733/10-11

with flexible anvil, for rivetted and


glued brake linings/shoes.

OPEN-RING insert tool

size 11 mm,
use with SERVICE-MANOSKOP torque wrench
No 730/5, for flare nuts on brake lines and
bleed screws.

'

Code

L
mm

R
g

76 41 30 21

330

461

'

'

'

59.00

Code

Type

58 23 10 11

Mercedes-Benz

'

'

12371

Brake calliper file

733/10-12

for removing dust, rust and dirt


from brake calliper groove.

55

32.10

OPEN-RING insert tool

size 12 mm,
for flare nuts on brake pressure regulator,
tightening torque 1518 N m.

'

Code

L
mm

R
g

74 54 01 01

260

104

'

'

'

36.20

Code

Type

58 23 10 12

BMW

'

'

12373

Steel wire brush

733/10-14

special slim design.

59

32.10

OPEN-RING insert tool

size 14 mm, for flare nuts on main brake cylinder,


tightening torque 1625 N m (BMW), for flare nuts on brake lines and
bleed screws (Mercedes-Benz).

'

Code

L
mm

Rows

77 44 00 01

230

'

'

R
g

70

10

'

9.20

12900/2N

Type

58 23 10 14

BMW, Mercedes-Benz

'

Brake disc gauge

DIN 862, for measuring the


thickness of car and motorcycle
brake discs in situ, stainless steel,
with locking screw and trailing
vernier scale (1/10 mm),
in plastic pouch.

733/10-17

measuring range throat depth


mm
mm

77 37 10 03

60

'

1049-9

S
1

32.10

OPEN-RING insert tool

'

'

'

60

size 17 mm, for flare nuts on main brake cylinder,


tightening torque 1625 N m.

Code

Type

58 23 10 17

BMW

'

Code

Code
'

55

'

233

115.00

733/10-19

64

32.10

OPEN-RING insert tool

size 19 mm, for flare nuts on main brake regulator,


tightening torque 3040 N m.

INHEX socket

for hexagon socket head screws,


size 9 mm, 3/8" a-drive,
for brake calliper retainers.

'

Code

Type

58 23 10 19

BMW

'

'

80

32.10

'

Code
'

02 15 10 09

Type

BMW, MINI

'

54-7

62

54CV/9

S
5

9.45

INHEX socket

for hexagon socket head screws,


size 7 mm, 1/2" a-drive,
for changing brake linings.

Set: Screwdriver sockets

for spline socket head screws


(Ribe-CV),
for brakes and cylinders head bolts.
Content:
M5; M6; M7; M8; M9; M10; M12;
M13; M14

'

Code

Type

03 05 00 07

BMW: 518, 520i, 525i, 528i

'

10

'

'

75

8.90

Code

Type

96 03 09 01

Fiat, Alfa

'

'

326

R
g

1420

136.35

54CV

Screwdriver sockets

3046

for spline socket head screws (Ribe-CV),


length 60 mm, 1/2" a-drive,
for brakes and cylinder head bolts.

Special sockets

for fitting and removing oil filter


covers when changing oil filter
cartridges.

'

Code

size

Type

03 09 00 07
03 09 00 09
03 09 00 13

M7
M9
M13

Fiat
Fiat (1.2 l; 8V/16V)
Fiat, Alfa (e.g. 1.6 l; 16V)

'

'

78
92
123

5
5
5

13.40
14.60
17.30

'

A a

Code

mm

'

Special tools for lubrication service


1015

Oil filter claw

"

02 11 10 32

32

3/8

02 11 10 36

36

3/8

'

for loosening of oil filters on cars.

12005

Type

e.g. Audi, MAN, Vauxhall Astra,


Corsa, VW Passat
130
e.g. BMW, Mercedes-Benz cars,
100 D Transporter, MAN,
Vauxhall Vectra B DI 16V,
VW Lupo 1.2 TDi, model year 99 171

17.80

21.30

Strap wrenches

for oil filters etc.,


up to 180 mm diameter,
non-slip rubber cloth tape,
22 mm width.

'

Code

No

L
mm

R
g

76 50 00 01
79 15 00 01

12005
12005/1 1)

236
600

264
68

1
1

'

'

Code
'

74 62 00 02
'

a
"

Clamp. width
mm

3/8

68120

3045

total height length of claws


mm
mm
65

50

530

'

25.60
9.90

) spare strap

89.00

'

12007

Special socket

Oil filter wrenches

adjustable for diameters 80110 mm.


Hardened anti-slip cams ensure safety during use.

for oil filters, size 74 mm, 14-point,


10 mm dia. bore and outside
hexagon 22 mm .

12007/2
12007/1
'

total height
mm

Code
'

74 37 00 01

52

'

R
g

131

'

S
1

15.70

Code

No

L
mm

R
g

76 52 10 01
76 52 10 02

12007/1 1)
12007/2 2)

150
240

226
319

1
1

'

'

3045K

Special socket

2
'

54-14

74 37 00 03
'

INHEX socket

for hexagon socket head screws,


size 14 mm, 1/2" a-drive,
for use on oil drain plug.

'

'

'

) with 1/2" a
) with lever handle

for oil filters, size 74 mm, 14-point,


10 mm dia. bore and outside
hexagon 22 mm , extremely
compact essential where access is
awkward.

Code

31.10
34.40

total height
mm
44

Type
e.g. Ford Mondeo
from 02/2002

R
g

104

Code

Type

03 05 00 14

Mercedes-Benz

'

15.40

'

R
g

135

10
12.00

327

Special automotive tools


10765-12

Special tools for engine and gear


transmission

Hexagon key wrench

Fiat-No A 5013
long, for hexagon socket head
screws, size 12 mm,
for oil drain plug on engine,
gearbox and rear axle.

12735

'

Code

Type

43 21 00 12

Fiat

'

'

1054-13

287

6.45

INHEX socket

for hexagon socket head screws, size 13 mm,


length 70 mm, 1/2" a-drive, for oil drain plug on
engine.

Clutch alignment tool

8-piece set, contains


1 clutch alignment mandrel,
length 220 mm;
1 combined sliding taper/cylindrical
bush, cylindrical bushes from
22.225.2 mm;
1 sliding cylindrical bush,
tapered at both ends,
cylinder diameters 1621 mm;
5 cylindrical bushes, two sizes each, cylinder diameter 1220 mm,
in wooden storage box 255 x 81 x 38 mm.
'

'

Code

Type

03 15 07 13

Lancia

'

'

Code
'

130

74 48 00 00
'

S
1

116.00

25.00

50TX-E10
1058

650

Oil service spanner

Socket

for external TORX screws, size E10, 1/2" a-drive,


use on mounting screws for GETRAG 260 gearbox,
as well as on automatic gearboxes fitted to US and
Japanese models.

bent, size 8 and 10 mm outside


square, for drain plugs on sump,
gearbox, differential.

'
'

Code
'

44 73 08 10

Type

Peugeot, Renault

'

1054KK-5

314

S
5

Code

Type

03 27 00 10

BMW

'

21.50

'

50TX-E12

INHEX socket

with ball-point hexagon, size 5 mm,


length 238 mm, 1/2" a-drive,
for use on socket head screws with
difficult access up to an angle of 25,
size 5 mm for use on sump screws of 5 cylinder diesel engine, van T4.

Type

03 31 00 05

VW/Audi

'

'

1054KK-8

S
5

Code

Type

03 27 00 12

BMW

'

19.50

INHEX socket

Code

Type

03 27 00 14

BMW

54TX-T27
Type

03 31 00 08

VW/Audi

'

154

10

9.15

'

'

'

Socket

'

size 8 mm, length 238 mm.

Code

55

size E14

'

9.10

Socket

50TX-E14

145

10

'

'

Code

53

size E12

'

21.90

56

10

9.95

Screwdriver BIT

for inside TORX screws, size T27, 1/2" a-drive,


use on switchgear of automatic gearbox 3HP 22,
4HP 22.
'

Code

Type

03 10 00 27

BMW

'

'

1418

72

11.00

BIT

for inside TORX screws, size T27,


1/4" E-drive, use on switchgear on
automatic gearbox 3HP 22, 4HP 22.

10

'

Code

Type

08 13 00 27

BMW

'

'

328

R
g

10

3.20

730N/5

SERVICE-MANOSKOP
torque wrench

11060-1a

1050 N m, with tool carrier for


insert tools, for tightening
ZF switch-gear and adjustment
brake belt BW 65 on automatic gearbox,
to use with ratchet insert tool No 735/10.

'

'

Type

50 18 10 05

BMW

'

'

735/10

831

Code

Type

71 16 00 21

Mercedes-Benz

'

Code

Internal puller

capacity 1620 mm, for sealing ring and


bearing on crankshaft, use with counter
stay No 11061-1.

'

251.00

11061-1

120

50.00

Counter stay

Ratchet insert tool

reversible, 1/2" a-drive.

'

Code
'

'

Code
'

58 25 00 10
'

6547

71 17 00 11

147

'

69.00

11060-2

654

45.40

Internal puller

capacity 2027 mm,


for bearing bush of idler gear on oil
pump drive, use with counter stay
No 11061-2.

Special circlip pliers

use on retaining ring on gearbox


main shaft (all "GETRAG" and
ZF gearboxes S4-18/3).

'

Type

71 16 00 12

Mercedes-Benz

'
'

Code

Type

65 47 41 70

BMW

'

'

3049-8

Code
'

154

11061-2

31.50

131

54.00

Counter stay

INHEX socket

for hexagon socket head screws,


size 8 mm, length 24 mm,
3/8" a-drive, for use on mounting
screws on fluid fly-wheel.
'

'

Code

Type

02 15 24 08

Mercedes-Benz

'

'

Code
'

28

71 17 00 12
'

S
1

70.50

10.10

730/2
51-27

1500

SERVICE-MANOSKOP
torque wrench

Socket
capacity 420 N m.

extra deep, bi-hexagon, size 27 mm,


1/2" a-drive, for rotating engine through
hexagon on crankshaft.

'

'

Code

Type

03 02 00 27

Mercedes-Benz

'

'

1054-10

294

03 15 14 10
'

50 18 00 02

VW/Audi

21.60

734/5
3/8"

INHEX socket

315

206.00

Square drive insert tool

a-drive, for use with

SERVICE-MANOSKOP
torque wrench No 730/2.

'

'

Type

'

for hexagon socket head screws,


size 10 mm, length 140 mm,
1/2" a-drive for bolts on car engines.

Code

Code
'

10

'

Type
Mercedes-Benz

R
g

150

S
5

Code

Type

58 24 00 05

VW/Audi

'

11.40

'

R
g

76

26.80
329

Special automotive tools


12717

Pin wrench

10623/1

'

Code

Type

44 70 00 18

2/80 Golf, Jetta, Passat, Audi 80

'

'

75

10

10.50

'

Code

L
mm

R
g

76 46 00 12

290

414

'

'

Special tools miscellaneous

10623/2
157

Chain exhaust-pipe cutter

'

mm

60 11 00 01

2575

'

'

K157

R
g

705

122.00

Chain

'

Code

L
mm

R
g

76 54 00 01

300

565

'

Code
'

69 13 00 01
'

1225

183

90.50

Special extension

Replacement Bowden cable for No 10623/2

79 54 00 01
'

10625

Code
12 25 00 01
'

10614

R
g

3/8

128

"

19.70

Code

R
g

76 46 00 00

220

293

30.50

Hose clip pliers CLIC

76 54 00 02

225

340

Hose clip pliers

for correctly closing hose clips


without ears, for shaft sleeves on
Audi, Mercedes-Benz, Toyota and
VW. Quality steel, nickel-plated,
jaws gunmetal finished.

Code

L
mm

R
g

76 54 00 03

200

173

'

'

Code

L
mm

R
g

76 46 00 13

200

189

330

28.00

'

'

'

Ear clamp pincers

10625/2

L
mm

'

35.00

L
mm

'

for CLIC hose clips


e.g. Alfa Romeo, Audi, BMW,
Opel, Peugeot, VW.
Work can be carried out at various
angles due to stepless swivelling
jaws.

10

Code

'

10615/1

120

for application of 1 and 2-ear


clamps on shaft sleeves, radiator
and fuel lines e.g. for Audi, BMW,
Ford, GM, Honda, Mazda,
Mercedes-Benz, Nissan, Opel, VW, quality steel, black paint finish.

'

'

'

Hose clip pliers

for self tightening hose clips,


nickel-plated.

'

'

'

117.00

'

Code

curved, for use on magnetic switch


diesel pump.

'

Hose clip pliers

'

'

70.00

registered design, with Bowden


cable and multiple locking positions,
especially for 12 and 15 mm
spring-steel hose clips, suitable
for use near cooling and heating
systems up to a diameter of 42 mm,
access to hard-to-reach places using Bowden cable remote action
(length 610 mm), e.g. for Alfa Romeo, Audi, Citron, Fiat, Ford,
Mercedes-Benz, Opel, Peugeot, Porsche, Renault, VW.

infinitely adjustable,
with twist handle, also suitable for
special steel pipes up to 1.8 mm
wall thickness,
chain length 270 mm.

Code

Hose clip pliers

registered design, with rotating jaws


and multiple locking positions,
single-handed use even with wide
openings due to variable-geometry
joint, especially for 12 and 15 mm
wide, large-format hose clips, e.g. for Alfa Romeo, Audi, Citron, Fiat, Ford,
Mercedes-Benz, Opel, Peugeot, Porsche, Renault, VW.

offset, distance between pins


18 mm, pin dia. O 2.9 mm,
length 140 mm, for ring nut of
tension pulley on 1.6 l diesel.

44.60

45.70

12001-1*

Thread taps

736/40

M 20 x 1.5; for fast, accurate


tapping of aluminium union nuts
for air-conditioner cooling hoses
for cars and other hydraulic connectors,
e.g. for Audi, Opel, VW. Patent, with inner bore for holding hose collar,
made of high-grade HSSG M2 steel. 13 mm hex drive for a T-bar or
ratchet with a 13 mm socket.

BIT holder insert tool

Internal hex drive 5/16", for screws in rear seats, for use with bit No 1435.

'

Code

L
mm

R
g

72 10 00 05

125

164

'

'

'

115.00

* to be discontinued

Code

Type

58 26 10 40

BMW: X6 model E71,


series 7 model F01/F02

'

'

'

12718

Flat scraper

1445

special steel, for removal of gasket


seals on carburettor, valve cover,
cylinder head etc.

112

41.20

BIT

for inside TORX tamper resistant screws, size T30,


1/4" E-drive, use on sensor screws wheelhouse
(models with airbag system).

'

Code

L
mm

R
g

72 03 01 01

265

160

'

'

'

19.00

Code

Type

08 16 00 30

BMW

'

'

12763

Pull hook for rubber exhaust mountings

with T-bar, chromium-plated,


black dip-coated, for pulling rubber
loops on exhaust mountings.
All cars except Ford.

12506-6

10

4.55

Hexagon nut spinner

flexible, size 6 mm, for screws


on hose clips of radiator hose,
max. tightening torque 8 N m.
'

'

Code

L
mm

R
g

74 20 00 01

210

100

'

'

Code

Type

43 10 02 06

BMW

'

'

Extractor pliers

'

Code

R
g

76 48 00 01

230

182

Code

Type

02 19 00 17

Mercedes-Benz

'

35.10

'

440-19

Fuel hose clamp

02 19 00 19
'

440-22

'

'

38

10

BIT

'

02 19 00 22
'

440-24

43.40

57

45.10

10

CROW-RING spanner

size 24 mm.

'

08 14 00 55

'

7.60

for inside TORX screws, size T55, 5/16" E-drive,


for screws in rear seats, for use with bit-holder
insert tool No 736/40.

'

40

CROW-RING spanner

'

Code

44.30

size 22 mm.

Code

1435

'

'

74 34 00 01

CROW-RING spanner

Code

Code

40

size 19 mm.

capacity up to 20 mm,
for stopping fuel flow temporarily.

'

15.80

size 17 mm,
a-drive, for use on pipes for air
conditioning unit.

L
mm

12975

10

CROW-RING spanner

'

'

167

3/8"

for removing fixing plugs on door


trims, outside trims, rubber bumper
covers etc.
Joint and jaws made of hardened
sheet steel, handles made of shaped
sheet steel.

'

14.00

440-17
12771

'

Type
BMW: X6 model E71,
series 7 model F01/F02

R
g

Code
'

02 19 00 24
20

10

6.00

'

R
g

57

45.10
331

Special automotive tools


735/20

Ratchet insert tool

11060-5

reversible, 1/2" D-drive,


use with SERVICE-MANOSKOP
torque wrench No 730/12 and 730/20,
for general service work.

Internal puller

capacity 3646 mm.


'

Code

Type

71 16 00 15

Mercedes-Benz

'

'

11060-6

'

Code

Type

58 25 00 20

Mercedes-Benz

'

'

302

S
1

78.50

Internal puller

capacity 4658 mm.


'

72.00

SERVICE-MANOSKOP
torque wrench

Code

Type

71 16 00 16

Mercedes-Benz

'

730R/5

385

'

11061-1

capacity 650 N m, 3/8" D-drive,


for general service work.

558

101.00

Counter stay

for Internal Puller No 11060/02, for use on bearings,


seals and bushes.

'

Code

Type

96 50 20 05

Mercedes-Benz

'

'

730R/12

945

288.00

SERVICE-MANOSKOP
torque wrench

'

25130 N m, 1/2" D-drive

R
g

654

Code
'

71 17 00 11

'

'

Code

Type

96 50 20 12

Mercedes-Benz

'

'

1410

319.00

11061-2

45.40

Counter stay

for Internal Puller No 11060/37.


'

730R/20
40200 N m,

SERVICE-MANOSKOP
torque wrench
1/2"

71 17 00 12

D-drive.

'

12506-7

'

Code

Type

96 50 20 20

Mercedes-Benz

'

'

11060-1

1555

339.00

Internal puller

Type

43 10 02 07

Mercedes-Benz

'

Type
Mercedes-Benz

'

11060-2

70.50

Hexagon nut spinner

Code

110

168

10

15.90

10760CV-2,5 Hexagon key wrench


17

'

71 16 10 11

flexible, size 7 mm, for screws


on hose clips of radiator hose,
max. tightening torque 8 N m.

'

'

'

capacity 1216 mm,


for use on bearings, seals and bushes.

Code

1500

Code
'

50.00

Fiat No A 89601 up to A 89611


for hexagon socket head screws,
size 2.5 mm up to 17 mm (see page 232).

Internal puller

capacity 2027 mm.

720Nf/80

'

Code

Type

71 16 00 12

Mercedes-Benz

'

'

131

54.00

Standard-MANOSKOP
torque wrench

capacity 160800 N m, 3/4" a-drive.


'

11060-3

10

Internal puller

Code

Type

50 19 00 81

VW: LT Syncro

'

capacity 2736 mm.

'

'

Code

Type

71 16 00 13

Mercedes-Benz

'

'

332

R
g

365

57.00

R
g

6102

808.00

730/5

SERVICE-MANOSKOP
torque wrench

735/40

Ratchet insert tool

reversible, 3/4" D-drive,


for use with SERVICE-MANOSKOP
torque wrench No 730/40.

capacity 550 N m,
for general service work.
'

Code

Type

50 18 00 05

VW/Audi

'

'

805

221.00
'

732/10-13

Ring insert tool

size 13 mm, for use with


SERVICE-MANOSKOP
torque wrench No 730/5.

58 22 10 13

VW/Audi

'

735/10

55

30.40

reversible, 1/2" D-drive,


for use with SERVICE-MANOSKOP
torque wrench No 730/5.

VW/Audi

'

730/20

S
1

107.00

Bit screwdriver socket

Code

Type

08 13 00 45

VW: Golf III

'

58 25 00 10

'

510

for inside TORX screws,


outside E 1/4" C 6.3 size T45, length 26 mm,
for use on door hinges.
Drive Tools:
f.e. ratchet reversible No 725/4B and ratchet tap holder No 1820
or ratchet reversible No 725/4B and torque wrench.

'

10

3.95

Special tools for HGVs

'

Type

VW/Audi

'

Ratchet insert tool

Code

58 25 00 40

1421

Type

'

Type

'

'

Code

Code
'

147

Wheel braces

69.00

DIN 3119/ISO 6788,


forged centre section, pressed-in
extension arms with extra deep
forged socket heads,
Chrome Alloy Steel, chrome plated.

SERVICE-MANOSKOP
torque wrench

capacity 40200 N m.
'

Code

Type

50 18 00 20

VW/Audi

'

'

735/20

1250

267.00

Ratchet insert tool

reversible,
D-drive,
for use with SERVICE-MANOSKOP
torque wrench No 730/20.
1/2"

'

Code

No

43 03 00 05
43 03 00 06

34c HGVs
35c cars

'

'

mm/"

L
mm

R
g

24; 27; 32; D 3/4"


17; 19; 22; D 1/2"

700
400

5053
2058

1
1

148.00
95.50

Tyre levers
'

Code

Type

58 25 00 20

VW/Audi

'

'

730/40

302

72.00

SERVICE-MANOSKOP
torque wrench

'

capacity 80400 N m.

'

50 18 00 40
'

Type
VW/Audi

Code

No

L
mm

R
g

74 01 06 00
74 01 06 02
74 01 06 03
74 01 04 00

39/1 HGVs
39/2 HGVs
39/3 HGVs
39 cars

600
600
600
400

897
1172
915
383

5
5
5
5

'

'

Code

Handy, sturdy construction,


purposefully shaped,
Chrome Alloy Steel.

R
g

1880

S
1

'

37.20
29.20
26.40
26.30

391.00

333

10

Special automotive tools


1068

Air filter claw

51-30

for loosening of filter cartridges on


air brakes (trucks).

Socket

extra deep, bi-hexagon, size 30 mm,


1/2" a-drive, on injector post.

'

Code

Type

03 02 00 30

Mercedes-Benz

'

'

440-27MB
a
"

Clamp. width
mm

1/2

100145

'

74 62 00 11
'

85

60

925

21.90

CROW-RING spanner

235.00

c IMPACT sockets

2509
3/4"

total height length of claws


mm
mm

for setting of electronic injection on


440-HP-engines.

'

Code

341

'

a-drive, for power drivers, extra deep, with reduced diameter,

Type

02 19 10 27

Mercedes-Benz

'

Chrome Alloy Steel, gunmetal finish.

Code
'

3678

92

54.50

4-pin socket

length 72 mm,
a-drive,
for use on pressure nut of injector post.
1/2"

'

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

25 09 00 27
25 09 00 30
25 09 00 32
25 09 00 33

27
30
32
33

40.5
44.3
46.8
48

44
44
44
44

100
100
100
100

72.5
72.5
72
72

672
728
778
803

2
2
2
2

'

'

'

50.50
54.50
58.00
59.00

Type

03 81 00 01

Mercedes-Benz

'

'

for Trilex wheels

1054-10

'

c IMPACT sockets

2609

1" a-drive, for power drivers, extra deep, with reduced outside diameter,
Chrome Alloy Steel, gunmetal finish.

Code

153

37.60

INHEX socket

for hexagon socket head screws,


size 10 mm, length 140 mm,
1/2" a-drive, for cylinder head bolts.
'

Code

Type

03 15 14 10

Mercedes-Benz

'

'

3054X-M12
'

Code

mm

d1
mm

d2
mm

L
mm

t
mm

R
g

26 09 00 27
26 09 00 30
26 09 00 32
26 09 00 33

27
30
32
33

42.3
46
48.5
49.8

54
54
54
54

110
110
110
110

80
79.5
79
78.5

1001
1047
1015
1102

2
2
2
2

'

'

61.50
68.50
72.00
72.00

for wheel nuts

24-17x19

11.40

Screwdriver BIT

'

Code

Type

03 26 14 12

Mercedes-Benz

'

OPEN-RING spanner

11068-2

bi-hexagon, size 17 x 19 mm,


for all threaded connectors on
injector pipes.

for tri-square socket head screws


(XZN), size 12, length 140 mm,
11.5 mm, 1/2" a-drive
for cylinder head bolts with tri-square socket head M 12.

'

'

150

160

15.60

Piston ring compressor

of special spring steel,


infinitely variable adjustment,
c/w adj. spanner, capacity 90175 mm.

'

10

Code

Type

41 08 17 19

Mercedes-Benz

'

'

R
g

151

10

'

19.10

Code

Type

74 14 00 03

Mercedes-Benz

'

'

334

R
g

270

37.70

55-30

Socket

730R/2

size 30 mm, hexagon 3/4" a-drive, for U-bolt nuts,


front.

SERVICE-MANOSKOP
torque wrench

capacity 420 N m, 3/8" D-drive,


for use on new push connector
for pneumatic installations on new
light-weight truck series.

'

Code
'

05 01 00 30

Type

Mercedes-Benz

'

313

'

S
5

16.30

Code

Type

96 50 20 02

Mercedes-Benz

'

'

55-36

Socket

730R/40/32

size 36 mm, for U-bolt nuts, rear.


'

Code

Type

05 01 00 36

Mercedes-Benz

'

'

24-10x12

386

18.60

OPEN-RING spanner

hexagon, size 10 x 12 mm,


for general service work.
'

Code

Type

41 08 10 12

Mercedes-Benz

'

'

440-30

59

10

15.60

CROW-RING spanner

size 30 mm, 1/2" a-drive for use on


hydraulic pipe flare nuts.

455

273.00

Torque wrench set

32 pieces, in steel case, for general


service work.
Content:
1 SERVICE-MANOSKOP
No 730/40, 80400 N m,
1 ratchet insert tool No 735/20,
reversible, 1/2" D-drive;
1 square drive insert tool
No 734/20, 1/2" D-drive;
7 o/e insert tools No 731/40,
sizes 13, 15, 17, 19, 22, 27, 30 mm
1 No 3731/40 size 24 mm;
7 ring insert tools No 732/40, sizes 13, 15, 17, 19, 22, 24, 27 mm
10 sockets, bi-hexagon No 50, sizes 13, 14, 15, 17, 19, 22, 24, 27, 30,
32 mm
4 accessories, 1/2" a-drive:
1 T-handle No 506
1 extension 255 mm No 509/10
1 extension 130 mm No 509/5
1 extension 55 mm No 509/2
'

Code

Type

96 50 20 53

Mercedes-Benz

'

'

9739

1313.45

'

Code

Type

03 19 00 30

Mercedes-Benz

'

'

540-19

155

54/12
56.50

CROW-FOOT spanner

size 19 mm, for use on new push connector


for pneumatic installations on new lightweight truck series.

Set of INHEX sockets

for hexagon socket head screws,


in steel case, for general service
work.
Content:
12 INHEX sockets No 54,
sizes 4, 5, 6, 7, 8, 10, 12, 14, 17,
19 mm,
No 3054/8, No 1054/10,
1/2" a-drive.
'

Type

96 03 05 03

Mercedes-Benz

'

'

Code

Type

02 20 00 19

Mercedes-Benz

'

'

540-24

Code
'

64

721Nf/80

30.80

2131

159.80

Standard-MANOSKOP
torque wrench

capacity 160800 N m, 3/4" D-drive,


for general service work.

CROW-FOOT spanner

size 24 mm.
'

'

Code
'

02 20 00 24
'

R
g

60

Code

Type

50 20 00 81

Mercedes-Benz

'

42.50

'

R
g

7222

1070.00

10

335

The STAHLWILLE KABELEX range

1
1

1,5

1501 + 1511

3,5

1502 + 1512

4 ABS

1503 + 1513,
1523

2,5

1504 + 1514

2,3

1505 + 1515

1506 + 1516

1,5 long

1507 + 1517

1,5 long

1508 + 1518

1,5 pin contact

1575

1584

1
1

1
1

1
1

1
Round plug
systems/
soldered contacts

1
1

1
1

1
Flat plug
systems with
2 or more
locking tongues
Crimp contacts

1
1

1
1

1
1

2,5

1585

2,8

1551

5,8

1552

1,6

1556

9,5 Maxi Power Timer-contacts

1559

2,8 Ducon

1565

1,5 Ducon

1566

4,8/6,3 Ducon

1567

9,5 Ducon

1568

VKR box contact

1577

MKR/MKS-contacts

1577-1
1578K-1

1
1

SLK-contacts (primary)

SLK-contacts 97 (primary+secundary) 1578K-2

LSK-contacts

1589K

1,65 E95

1587

For GSK-flat-fuse contacts


(1-, 2- and 3-channel
plugs, 2, 4 and 6 locking
tongues)

1588

2,8/5,8
Junior Power Timer-contacts
Standard Power
Timer-contacts

1591

Flat plug
systems with
2 locking tongues
asymmetrical
Crimp contacts

0,64 MQS asymmetrically


1

1
1

1
1
1

1
1

336

1
Flat plug
systems with
1 locking tongue
Crimp contacts

No

Vo
lv
o

Contact size mm

M
Be erc
nz ed
es
Sc
an
ia

AN
M

VW
S /A
Po eat/ ud
rs Sk i
ch od
e a

Re
na
ul
t
Vo
lv
o

PS
A

M
Be erc
nz ed
es
Op
el

az
da
M

BM

Round plug
systems/
crimpcontacts
(The complete
tool consists of
ejection tool with
bush)

Lorries

Fo
rd

Private cars

Tools

Fi
at

Plug system

1556-1

2,8

1557

4,8

1558

2,8

1572

2,8/5,8

1553

2,8

1554

5,8

1555

Several Pid-Pod

1562

0,8 Ducon

1563

1,5 Ducon

1564

1,6 Without box

1574

2,8

1576

TORX
TORX Screw Sizes. according to DIN

DIN

931/933

912

963/965

964/966

T8

T8

T8

7984

7985

7991

7981

7982

7983

T8

T8

T8

ST 3.5

T10

T10

T10

ST 3.9

T15

T15

T15

ST 4.2

T20

T20

T20

ST 4.8

T25

T25

T25

T25

T25

T25

T30

T30

T30

M2
ST 2.2
M 2.5
ST2.9
M3

E4

T10

M 3.5

M4

M5

E5

E6

T20

T25

T10

T10

T15

T15

T20

T25

T10

T10

T10

T15

T20

T20

T25

T25

T20

T25

T20

T25

ST 5.5
M6

E8

T30

T30

T30

T30

T30

T30

ST 6.3
M7
M8

E10

T45

T40

T45

T45

T45

T40

M 10

E12

T50

T50

T50

M12

E14

T55

T55

T50

T50

T50

M 14

E18

T60

T60

M 16

E20

T70

T70

M 18

E24

T80

T80

M20

E24

T90

T90

M 22
Camcar
Licence sheet

T100*
TMF-

TMF-

TMF-

TMF-

TMF-

TMF-

TMF-

TMF-

TMF-

TMF-

16001

17012

17065

17066

17069

17085

17091

17081

17082

17083

Special screw

Screw correlation for TORX-Tools


p
Size

C
mm

Screw correlation for TORX-Tools

Screws
metr.

Screws
"

p
Size

C
mm

Screws
metr.

Screws
"

T5

1.4

M1.4M2

E4

3.8

M3

2.22.9

T6

1.6

M2

E5

4.7

M4

T7

2.0

M2.5

2.2

E6

5.7

M5

T8

2.3

M2.5

E7

6.2

M6

T9

2.5

M3

2.9

E8

7.5

M6M7

3.54.2

T10

2.7

M3M3.5

E10

9.4

M8

T15

3.3

M3.5M4

3.5

E11

10.1

T20

3.8

M4M5

4.2

E12

11.1

M10

T25

4.4

M4.5M5

4.8

E14

12.9

M12

T27

5.0

M4.5M5M6

E16

14.7

M12

T30

5.5

M6M7

E18

16.6

M14

T40

6.6

M7M8

E20

18.4

M16

T45

7.8

M8M10

E24

22.1

M18M20

T50

8.8

M10

T55

11.2

M12

T60

13.2

M14

T70

15.5

M16

T80

17.6

M18

T90

19.9

M20

T100

22.1

M22

337

Index of numbers

No
AB 91B
AB 91P
AB 97N
BL 150
BL 153
BL 1500
BZ 150/3/4
BZ 153
BZ 1500
ES TX/32
ES 1/4" + 10760CV
ES 1/2" 512/6
ES 10/10;
5,5x722x24 mm
ES 10/10;
6x730x32 mm
ES 13/5; 2732 mm
ES 13/8; 1624 mm
ES 13/10; 615 mm
ES 14/8; 1624 mm
ES 14/10; 615 mm
ES 20/8;
6x719x22 mm
ES 20/10;
6x730x32 mm
ES 24/7;
8x1019x22 mm
ES 25/7;
7x817x19 mm
ES 29/6;
8x918x19 mm
ES 52/17
ES 54/54KK
ES 54KK/5
ES 54X/54TX
ES 55/6/4
ES 102/105/108/8
ES 102/108/109/4
ES 456/16/6
ES 721/15/3/2
ES 1054/2054
ES 1054/2054TX/6
ES 2309K/3
ES 2309/4
ES 4620/4622/
4632/8
ES 4620/4628/
4630/7
ES 4620/4630/8
ES 46224734/9
ES 4622SK/
4632SK/6
ES 4650/9
ES 4656/9
ES 4660/4665/VDE/6
ES 4820/4830/6
ES 4820/4830/8
ES 4856/9
ES 65016602/7A
ES 65016602/7B
ES 65436546/4
ES 1067013110/11
ES 10750/10;
6x720x22 mm
ES 10768/6
ES 10769/7
ES 10769B/7
ES 10956/10960/2
ES 10956/10970/2
ES 12500N/7
H 11030
H 11050
K 157
KH 91
KL 158
MP300
MP1001500
PB98
PZ1221PZ1223
R 91B
R 91P
R 920
RI 1500
RL 150, RL 153
RL 1500
SCH 60140
SCH 60140KM
SCH 91B
SCH 91P
SD 10351N
SDH 91P
SDH 921
SK 91B
SK 91P
SP 11040
SP 11041
SP 11050
SP 11053
SP 11055
SP 12150
SR 150
SR 153, SR 155
SR 290SR 393
ST 11
ST 97
ST 97 R
STW 391-700
STW 392-70
STW 393-70
TBT13216
TCS TX/57 MF N

338

Page
12
14
24
270
270
270
270
270
270
47
48, 111
48, 142
46, 77
46,
46,
46,
46,
46,
46,

77
80
80
79
82
82

46, 83
47, 84
47, 88
47, 90
47, 91
48, 127
48, 130
48, 131
49, 133
49, 145
53, 274
52, 274
48, 126
50, 325
49, 131
49, 134
49, 157
49, 157
50
50
50
50
50
51
51
51
51
51
51
52, 257
52, 257
52
53, 277
47, 94
51, 235
52, 235
52, 236
53, 273
53, 273
51, 231
290
288
270, 330
17
271
205
206
24
162
15
15
24
270
270
270
23
23
13
14
305
17
24
15
17
291
291
291
291
291
291
270
270
205
72
72
72
205
205
205
29
64

No
TCS 1/3 MF
TCS 1/4" + 10760CV
TCS 1/2"512/6
TCS 1/2"512/9
TCS 10/10;
6x724x27 mm
TCS 10/10;
6x724x27 mm MF
TCS 10/10;
6x730x32 mm
TCS 10/10;
6x730x32 mm MF
TCS 10+13+24/30
TCS 10a/9
TCS 12+13+14/29
TCS 13/17; 624 mm
TCS 13/17;
624 mm MF
TCS 13/18; 624 mm
TCS 13/21; 634 mm
TCS 13/25; 5,534 mm
TCS 13a/19
TCS 13a/23
TCS 14/5; 1721 mm
TCS 14/8; 816 mm
TCS 17/12
TCS 20/8;
6x719x22 mm
TCS 20/8;
6x719x22 mm MF
TCS 20/10;
6x730x32 mm
TCS 25/7
TCS 29/7;
8x920x22 mm
TCS 40/35/9
TCS 40/41/44/8
TCS 40/45/50/89/19
TCS 40/456/52/78/19
TCS 49/1049/2049/
45TX/49TX
TCS 50a/17
TCS 50IMP/51IMP/19
TCS 50TX/54TX/17
TCS 50/51/52/32
TCS 50/52/30/6 MF
TCS 52/14/4
TCS 52/17
TCS 52/18 MF
TCS 54/2309K/12506
TCS 54/54TX/18
TCS 54/54X/16
TCS 55/11/6
TCS 102108/11
TCS 102108/
10956/10960/18
TCS 102108/
10957/10960 MF
TCS 102108/
10957/10960/13
TCS 102108/
10957/12718/13
TCS 102108/
10957/10960/16
TCS 102108/
10960/10
TCS 102109/
10956/10960/6
TCS 240/6
TCS 456/16/4 MF
TCS 456/16/7
TCS 456/31/8
TCS 4026/3
TCS 4620/4630
TCS 4620/4660VDE
TCS 4620/4660VDE +
10767
TCS 4621/4734/16
TCS 4622/4632
TCS 4622/4650 +
10760 + 10766
TCS 4650
TCS 4660/4665
TCS 4724/4840 +
10767
TCS 4820/4830
TCS 4856
TCS 65016602/4
TCS 65016602/4N
TCS 65346545/6
TCS 65436564/3
TCS 65436546/4
TCS 10765/10768/
12507/19
TCS 10769 +
10771/17
TCS 1202513110/11
TCS 13126/13127/2
V 12614
VE 50-150
010, 012, 023
013/6KH
5, 5.1/2
8
10, 10a, Sets
12, 12a, Sets
13, 13a, Sets
14, Sets
15
16, Set
17, Sets

Page
69
59, 111
61, 142
61, 142
56, 77
56, 77
56, 77
56,
56,
56,
57,
56,

77
77
78
81
80

57,
56,
57,
57,
57,
57,
58,
58,
58,

80
80
80
80
81
81
82
82
89

58, 84
58, 84
58, 84
58, 90
59, 91
59, 112
59, 112
63
62
60,
62,
64,
62,
61,
61,
61,
61,
62,
62,
63,
63,
68,

126
128
156
130
128
142
142
128
128
63
133
131
145
275

69, 276
68, 275
68, 276
68, 275
68, 276
67, 275
67, 275
58, 88
60, 126
60, 126
60, 126
59, 93
64, 224
65, 225
64, 225
65, 225
64, 225
65, 226
65, 228
65, 228
66,
66,
66,
66,
67,
67,
67,
67,

229
229
230
258
258
258
258
258

66, 235
66, 236
69, 278
69, 284
290
15, 23
78
78
91
92
7678
84
7881
81, 82
82
85
89

No

Page

20, 20a, Sets


83, 84
20TX
87
21, Sets
86
21TX
87
23, Set
86
24, 24a
87, 88, 322, 334, 335
25, 25aN, Sets
89, 90
25aSP
90
25B
90, 165
25GK
324
26a
90
27
90
29, 29a, Sets
90, 91
35c Pkw
325, 333
34c Lkw
325, 333
39 Pkw, Lkw
325, 333
40D, 40aD
98
40, 40a, 40DL, 40aDL
98, 99
40-3
321
40aD/10CL
98
40aDL/7
99
40aDL/10CL
99
40aDV, 40L
99, 100
40aSP, 40aLSP
101
40aD/8/1H
106
40CL
102
40, 40a, Sets
107111, 139
40TX
100
40TX-E8
322
40/7N40/9N
148, 149
40/9K
148
41K
101
44, 44a
101
44K
101
44KTX, 44KTXB, 44P
102
44PZ
102
45, 45a
113
45, 45a, Sets
122125
45aP
115
45aPSP
115
45aSP
115
45CL
119
45TX, Set
115
45/1K
148
45/1N
148
46, 46a
114, 322324
46aSP
115
47, 47a
114, 115
47TX
115
49, 49a
116
116
49TX, Set
49X
116
50, 50a
127
50, 50a, Sets
138141
50aPSP
130
50aPLSP
130
50CL
134
50IMP, Set
156
50TX, Sets
129, 140, 328
50/1N50/6N
148, 149
50/4K
149
51, 51a
128, 319, 320, 323,
329, 334
51aP
130
51S
129, 323, 325
51IMP
156
51/8
129
52
127
52 Sets
138140
53
129
54, 54a
130, 326, 327
54/8/4
138
54/10
130
54/12
335
54IC
131
54IMP
157
54KK
131
54CV, 54CV/9, 54X
132,
321, 322, 326, 327
54TX
133, 319, 328
54TX/9, 54TX/10
133
54TXB
134
54TXB/9
134
54TXB/10
134
55, 55a
143, 322, 335
55, 55a, Sets
145
55IMP
158
55/6, 55/7
149
56
143
56IMP
158
59, 59X
143
59TX
144
60
146
60/1, 60/2
149
60 Sets
147
60IMP
159
61
92
64
146
66IMP
159
70IMP
160
70V
204
70VK
219
71
192, 193
73Nm/15
193
80IMP
161
82/013
29
83/09
29
83/010
29
86TX
110, 141
87aN
141
87N
140

No

Page

88TX
109
89N
123
89TX
110, 124, 141
91B/6
12
91B/7
12
91B/8
13
91P/6
13
91P/7
14
91P/8
14
91/6 TTS
17
91/6 TTS electronic M
17
92KM G
23
94N
22
94N/KM
22
96/3
23
97H/8
21
97H/KM
21, 22
97N
20, 21
97N/KM
20, 21
100
273
101, 102
273
102, Sets
274
103
273
104
274
104-5/6D
274
105
274
105-8/6K
275
108
274
108/6D, 108/6Pc
275
109
274
110
273
112, 112/1
273
130a
85
130aSP
85
150
270
153
270
155
270
157
270, 330
158
271
165N
271
180a
85
220, 220a
87
220aSP
87
230a
85
240, Sets
88
400, 400QR
103
400 Drall
104
401
104
402, 402a
100
402a Set
100
100
402aK
402aSP
101
403
104
404, 404QR
104
405
104
405QR
104
405W
104
406
104
407, 407QR
105
409
105
409M
105, 219
409M/432M/514M/3
105,
121, 137
410
105
411
102
412
105, 166
412-1
105, 167
413
104
414H
106
415
102
415B
103, 165
415QR
103
415QRL
103
415QR N
102
415SG-QR
103
415SGB
103, 165
415SGH
106
416
103
417/1
105
421
120
422
119
424, 425, 425QR
120
427
120
427QR
121
427W
121
428
121
428QR
121
431
121
432, 432M
121, 122
433/1
121
434
121
435, 435QR
119
435QR N
119
435SG-QR
119
440, 440a
117, 325,
331, 334, 335
440S MJ
117
442
122, 166
443
122, 166
445
120
446/08
28
118
447, 447a
447aSP
119
450
120
452
120
453
120
456
113
460a
113
501
136
501B
136
5021/2
204, 219

No
504
506
506QR
509
509IMP
509QR
509W
510
510IMP
510QR
512, 512G, 512SG-QR
512QR N
513
137,
513IMP
514, 514M
514IMP
515
517
522
532, 532G
540, 540a
118, 319,
540aHD
543
552
554
556
558
559
560IMP
561
561IMP
563
568
568IMP
569
569IMP
712R/6
713R
714
714 AUDIT
714R
714R AUDIT
720Nf
721
721Nf
725/4
725B
725L/5
725QR
730
187, 329,
730D, 730DR
730N, 730NR
730R/40/32
731, 731a
732, 732a
199, 200,
732/80
732/100
732G
732TX
733, 733a
734
734/80
734F
734K
734L/5
735
197, 329,
736
167,
737
755, 755R/1
759IMP
760
768IMP
771IMP
775
775/30N/2
801N
802N
803N
804N
806/9 TCS
806/10
808/9
811N
841N
859
859IMP
860IMP
865IMP
866
866IMP
867IMP
868IMP
871IMP
876N
876TX
882888
900, 900/6Pc, Set
904
905/25, 906
910
912
913
913/1
913/1B
913/1P
913/1PA
913/2
913/2BP
913/3
913/3B
913/3P

Page
136
136
136
136
158
137
136
137
158
137
135
135
319, 322
158
137
158
135
135
135
135
322, 335
118
137, 166
142
144
144
144
144
159
144
159
144
144
159
144
159
191
191
180, 181
183
181
183
188, 332
188
189, 335
197
197
197
197
332, 333
184
186, 329
203, 335
198, 199
321, 333
200
201
200
201
201, 326
198, 329
198
198
219
198
332, 333
201, 331
202
190
160
195
161
160
194
168
31
32
32
33
55, 307
44, 306
45
34
35
147
160
161
160
147
160
161
161
160
140
140
146
278
279
278
23
15, 24
24
24
15
15
15
24
15
24
12
13

No

Page

920
25
920 C
25
920 C-SCH
25
922N
25
1000 TCS
318
1015
327
1023
319
1042
323
1043, 1043/1
323
1049
116, 326
1054
131
1054-10
321, 329, 334
1054-13
320, 328
1054KK
132, 328
1054KKTX
134
1054TX
133, 134
1054TX/4Pc
134
1054X
132
1058
328
1062
319
1068
334
1100 TCS
317
1110 TCS
308
11571169
162
11801186
162
1200/1
166
1201
164
1204/8
163
1204/21-1
164
1204/21-2
164
12181223
162
1225
121, 330
12311234
162
12421250
167
12601262
167
12701272
167
12801284
167
12901296
167
1299
163, 190
13001304
163
1350, 13561360
162
14071421
162
1417
162, 322
1418
162, 328
1421
162, 333
1427
163
14301446
162
1435
331
1436IP1446IP
163
1440TPI1446TPI
163
162, 331
1445
1474/2
305
15011508
298
1510
296
15111518
298
1520
296
1523
298
1550
296
15511555
298
15561559
298
1560
297
1562
298
1567, 1568
299
1570/1, 1570/2
297
1572
299
15741578
299
1584, 1585, 1587
299
1589K
299
1590
297
1591
299
1650N, 1650K
271
1651
271
1652N
271
1655N, 1656N
271
1700
297
1720
297
18201822
203
2049
116
2054
131
2054X
132
2054TX
133
2307TX
157
2308TX
157
2309
157, 325
2309K
157, 325
2500TCS
309
2501N TCS
311
2509
158, 334
2609
159, 334
2801
167
3000
320
3004
321
3022N/1TCS
315
3026N/1TCS
313
3027
34
3045
327
3045K
327
3046
327
3047
324
3049-8
116, 329
3049X
116
3054
131
3054X
132, 334
3054X-M10
321, 322
3054X-M12
321, 334
3054X/54X/8
132
31153116
165, 166
3216
166
3316/1
166
3466
114, 323
3505
137, 320

No
3678
3825/1
4000
4004
4006/1
4007
4008
4008/27/1R
4014
4025, 4026
40304036
40404045
40504058
4060
4110
4150
4150QR
4204
4205, 4205a
4350
4350QR
4600
4606
4620
4621
4622
4622SK
4628
4630
4631
4632
4632SK
4636
4640
4650
4650L
4656
4660 VDE
4665 VDE
4670 VDE
4691
4692
4693
4694
4695 VDE
4696
4697
4699
4724
4734
4744
4751
4752
4753
4797
4798
4820
4830
4840
4856
4891
4892
4899
5001TCS
5040
5040N
5091IMP
5092IMP
5100
5120 + 7210/15
5120G
5120QR
5120QR N
5520
5591IMP
5592IMP
6091IMP
6092IMP
6501
6507
6508
6509
6510
6511
6512
6513
6514
6516
6517
6518
6519
6523
6524
6525
6526
6529
6530
6531
6532
6533
6534
6535
6536
6537
6538
6540
6543
6544
6545
6546
6547

Page

106,
106,

103,

120,
114,
114,

114, 129,
135,
136,

240,
240,
240,

242,
242,
243,
243,
244,

246,

334
166
164
93
164
165
165
165
94
93
168
168
168
168
103
103
204
93
92
120
204
323
323
226
226
226
226
226
227
227
227
227
227
227
227
228
228
228
229
229
224
224
224
224
228
224
224
224
226
227
227
230
231
231
230
231
230
230
230
230
229
229
229
312
136
136
158
158
323
203
135
204
136
144
159
159
160
160
262
262
262
240
241
241
241
241
241
241
259
242
242
262
262
242
259
263
263
243
243
263
244
244
244
244
245
259
245
245
246
246
329

No
6549
6551
6554
6555
6556
6557
6558
6559
6561
6562
6562/1, 6562/2
6563
6564
6565
6566
6567
6568
6571
6572
6573
6575
6576N
6600
6601
6602
6603
6604
6605
6606
6607
6612
6613
6614
6615
6617
6618
6619
6620
6621
6622
6623
6624
6630
6634
6637
6638
6639
6640
6641
6660
6661
6662
66706674
6676, 6677
6702
6703
6704
6705
6706
6966
7091IMP
7092IMP
7160
7161
7195-2
7210
7250QR
7301, 7302
7350
7370
7380N, 7385N
7395-1
7396
7706PC
7707 W
77217724
7728
7732-1
7732-2
7750
7750-1
7751
7751-1
7752
7755
7756
7759-1
7759-3
7759-4
7760
7761
7761/3
7762
7762-1
7787
7788
7789
7790
7791
7791-1
7791-2
7792
7792-1
7794
8002
8003S
8004S
80158017
8022N
8023-2
8023-3

Page
248
247
247
248
248
248
248
249
249
249
249
250
250
250
250
250
251
251
247
247
251
251
252, 263
252
252, 264
259
260
259
260
260
253
260
261
261
253
253
261
261
261
254, 264
254, 264
254
254, 264
255
255
255
255
255
256
256
256
256
265
265
257
257
257
257
257
256
161
161
182
189
182
203
204
190
120, 136, 204
202, 203
203
185
189
213
216
217
211
181
181
218
215
218
218
218
324
324
192
185
218
218
218
218
182
182
219
219
137, 219
215
214
214
215
215
215
209211
30
69
72
71
71
70
70

No
8023-4
8023L
8024
8024-1
8025
8026S
8027
8029
80318041
8042
8043, 8043/1
80448046
8050
8091/1IMP
8092/1IMP
8820
10350N
10351N
10351/1
10351/2
10351/3
10352
10352/1
10354, 10355
10356
10356R
10503
10506
10507N KK
10518
10546
10551
10554
10599/2
10613
10613/1
10614
10615/1
10623/1, 10623/2
10625
10625/2
10626
10627
10642, 10643
10670, 10672
10676
10750, Sets
10750 1/2
10751
10757
10759, 10759a
10760CV
10760aCV
10760CV, 10760aCV,
Sets
10761
10765, Set
10766, Sets
10767, 10767a, Sets
10767H, Set
10768
107682K
10769
10769B
10771, Set
1077510795
1080010842
1084510890
10895, 10900
1090510908
10915, 10916
10917
10921
10922
10923
10925
10940
10955, 10955R
10956
10956R
10957, 10957R
10958
10960
10970
10980
10998
11005, 11006
11007
11030
11040
11041
11042
11050
11051, 11053, 11054
11055
11056
11060
289, 322,
11061
290, 322,
11062
11063, 11063/1
11066
11066R
11068
11069
11085
1109511097
12000
12001-1
12005, 12007
12025
12030

Page
72
70
70
70
70
71
71
70
30
71
70
71
30
161
161
146
304
304
305
305
305
304
305
305
305
305
319
319
228, 319
319
232
232
231
325
325
326
330
330
330
330
330
323
324
303
276
276
94
94
94
236
106
232, 332
232
232
234
233, 328
233
234
234
235
235
235
236
233
300
300, 301
302
302
303
303
303
303
303
303
302
272
272
272
272
272
272
272
273
300
300
303
303
290
289
291
289
288
288
289
288
329, 332
329, 332
290
320
320
320
320, 334
320
319
321
278
331
327
277
277

No
12035
12036
12050
12053, 12053R
12108
12150, 12152
12200
12250, 12251
12320, 12321
12322
12371
12373
12374
12375
12377
12378
12481
12495
12500N
12503
12504
12506
231,
125072K
12600
12613, 12614
12615
12616
12623
12665
12705
12717
12718
1272712730
12731
12735
12749, 12749R
12752
12753
12763
12769
12770
12771
12800
12900N
12900/1N
12900/2N
12905
12910
12915
12920N, 12920NR
12921 M
12921N, 12921NR
12922E
12923
12931
12932
12935N
12941N
12941R/4
12943N
12943R
12965N
12965R
12965-1
12965-2
12965-2R
12965-3
12965-3R
12966, 12966R
12975
13006, 13007
13008
13010
13100
13110
13115
13120N
13120R
13120-1
13126
13126-1
13126-2
13126-3
13127
13130, 13131
13135
13200a
13205a
13207a
13208a
13209
13210
13211a
13213a
13214
13214a
13214aWW
13214WW
13216
13217
13220
8381202183812089

Page
277
277
277
277
321
289
277
280
280
280
326
326
280
323
280
280
280
322
231
164
164, 319
331, 332
231
281
290
279
291
291
278
321
330
305, 331
304
321
328
305
303
303
331
304
304
331
279
279
279
279, 326
324
281
279
281
281
281
282
281
279
280
279
282
282
282
282
282
282
282
282
282
282
283
283
331
168
163
163
279
279
280
281
281
281
283, 284
283
283
283
284
284
284
35
36
36
37
31
37
38
38
39
41
42
40
29
28
121
4653

339

Alphabetical Index

A
Accessories
1/4HH Y 102106
3/8HH Y 119122
1/2HH Y 135137
3/4HH Y 144
1HH
Y 146, 147
Adaptors 105, 118, 119, 120, 121, 122, 137, 144, 147,
158161, 166, 168, 202, 203, 319
Additional tray 24
Air filter claw 334
Alignment tool 304
Angle module 185
Anvil dolly 301, 302
Automotive voltage tester 324

D
D/E flexi joint spanners 90, 91
D/E open ended spanners 7678, 84
D/E ring spanners 8388, 90
Dinging hammer 300, 301
Display light unit 70
Display stand for pliers 72
Display stand for sockets 1/4HH, 3/8HH, 1/2HH sq. dr. 72
Display tray 70
Display units 69, 70
Dividers 71
Docking station for MANOSKOP 182
Dollies 301, 302
Double flaring tool 271
Drall screwdrivers 224231
Draw handle 305
Drawer separator 15, 23
Drawers 13, 14, 23, 71
Drift pins 274
Drive handle 103, 104

B
Balance weight pliers 325
Ball joint separators 291
Ball point hexagon driver 228, 234, 319
Bar handle 144, 146
Battery terminal pullers 289
Bearing scraper 276
BIT box 164
BIT holder insert tool 167, 201
BIT ratchet 103, 106, 165
BITS for
5-star screws 163
inside hexagon screws 163, 167, 168, 190
Phillips screws 162, 167, 168
Pozidriv/Supadriv screws 162, 167
slotted screws 162, 167, 168
TORQ-SET screws 163
TORX PLUS screws 163
TORX screws 162, 163, 167
tri-square socket head screws 162
TRI-WING screws 163
BITS holders 105, 122, 137, 164167, 319
BITS screwdrivers 162, 163, 167, 168
Blank end insert tool 202
Body files 303
Body spoons 302
Box spanners 94
Boxes, empty 148, 149
Bradawl 236
Brake caliper brush 326
Brake caliper file 326
Brake disc gauge 279, 326
Brake spring pliers 325, 326
Brass punch 322
Brass wire brush 280
Bumping spoons 302

C
Cable extractor tools KABELEX 296299
Cable holder 17
Cable knife 280
Cable shear 254, 264
Calibrating square drive insert tools 219
Calibrating square drive units 219
Calibrating systems 209215
Calibration software 181, 192
Carburettor screwdriver 226, 319
Carburettor tools 226, 319, 320
Car circuit tester 324
Centre punches 274
Chain pipe cutter 270, 330
Charger for Li-ion battery 182
Circlip pliers, inside and outside 245, 246, 329
Clamping block 271
Clamping screw 271
Claw lifter 282
Clip strips 98, 99, 102, 119, 134
Clutch alignment tool 328
Cold chisels 273, 274
Combination pliers 240, 262
Combination spanners 7882, 85, 89, 94
Connecting pins (for sockets) 158161
Connector pliers 251
Container 30
CONVERTA-modular system 27, 28
Corner display unit 72
Counter stays for puller 290, 329, 332
Cover 24, 72
Crimping pliers 255, 256
Crocodile terminal 324
Cross cut chisels 273
CROW-FOOT spanners 118, 319, 322
CROW-RING spanners 117, 331
Cutter 282
Cutting wheels 270

340

E
Ear clamp pincers 330
Ejection tools KABELEX 296299
Electricians cable knife 280
Electricians screwdrivers 226, 228
Electronics flat nose pliers 259
Electronics oblique cutters 260, 261
Electronics screwdrivers 230
Electronics side cutters 259, 260
Electronics snipe nose pliers 259
Electronics top cutters 261
Embossing hammer 272
Empty inlays 53
Empty tray for small components 15, 24
Engineers files 277
Engineers hammers 272, 273
Engineers scrapers 276
Engineers scriber 280
EXPRESS pipe cutters 270
Extensions 104, 106, 120, 121, 136, 137, 144, 147,
158161, 290, 320
Extensions with wobble-drive 104, 121, 136
Extensions, flexible 104, 121
Extractor pliers 331

Heavy duty side cutters 252, 264


Heavy duty steel fixers pincers 256
Heavy duty top cutters 253
Hexagon key wrenches 232235, 328, 332
Hexagon nut spinners 231, 331, 332
with T-handle 231
Hi-Lok-Tools 106
Holding device (for spanners) 30
Hooks 30, 71
Hook spanner, adjustable 281
Hose clip pliers 330

I
IMPACT accessories 158161
IMPACT driver/set 168
IMPACT sockets
1/2HH
Y 156, 157
3/4HH
Y 158
1HH
Y 159
1 1/2HH Y 160
2 1/2HH Y 161
IMPACT INHEX Sockets 157
INHEX sockets 101, 116, 130132, 143, 146, 320, 321,
326329
INHEX sockets for Ribe-CV 132
Inlays, empty 53
Insert tools for MANOSKOP torque wrenches 197203
Insert tools for TORSIOMETER/TORSIOMAX 165168
Interface adapter, set 218
Internal pullers 289, 322, 326, 329, 332

J
Jack cable 218
Jet reamers 319

K
KABELEX ejection tools 296299
Key wrenches 232235

F
FastRatch ratchet wrenches 88
Feeler gauges 321
File blades 303
File brush 280
Files 277, 303
Finger protector(-chisels) 273
Flange tool 302
Flaring cones 271
Flaring spindle 271
Flat engineers scraper 276
Flat (gasket) scraper 305, 331
Flat nose pliers 240242, 259, 262
Flexible drive handle 104
Flexible extensions 104, 121
Flexible handles 104, 120, 136
Flexible heads 144, 146
Flexible ratchets 103, 120, 135
Flexi-joint spanners 90, 91
Friction gauge 193
Fuel hose clamp 331

G
Gauges 193, 203, 278, 279, 321, 326
Grinding tools 321
GRIPMAT 23
Gripping pliers 242, 251
Grooving chisels 273
Guide handle 305

H
Hacksaw and blades 277
Hacksaw frame 277
Hammers 272, 273, 300, 301
Hand vice 277
Heater plug socket pliers 324
Heavy duty pipe wrenches 248
Heavy duty ring spanners 91

LED headlight 283


LED penlight 283
LED torch 283
LED-lighting for torque wrenches 189
Lever action top cutters 253
Lever bar 303, 304
Li-ion battery for MANOSKOP 182
Light unit 281
Locking adaptor 105, 121
Lubrication service tools 327, 328

M
Magazine case 27
Magazine drawer 27
Magnetic lifters 281
Main tester 231
Mains adaptor 218
MANOSKOP torque wrenches 180184, 186190, 192,
193
Manutork 214, 215
Mechanics flat nose pliers 241
Mechanics gripping pliers 242
Mechanics oblique cutter 253
Mechanics round nose pliers 242
Mechanics snipe nose pliers 243245, 263
METAL pipe cutters 270
Micrometers 279
Mini-electronic side cutter 260
Mini-waterpump pliers 248
Multifunctional back panel 12, 13, 24
MULTIPOWER-torque multiplier 205, 206
Multi-purpose worktop 24
Multiplex beechwood worktop 15

N
Needle files 279
Needle pliers 244
Non-slip mat GRIPMAT 23
Nut spinners 231
Nut splitters 279
Nylon hammers 272

O
Oblique cutters 253, 261, 261
O/E insert tools (for torque wrenches) 201, 326
O/E striking spanners 93
Offset screwdrivers 106, 232
Oil cans 280
Oil filter claw 327
Oil filter wrenches 327
Oil service spanner 327, 328
Open ring insert tools 201, 326
Open ring spanners 87, 88, 322, 326

P
Padlock 280
Panel beating tools 300304
PC-cases, empty, for torque wrenches 190
PC-wallets, empty 78
Pecking hammers 300, 301
perfectControl calibrating unit 209, 210
Perforated panel 24, 30
Personal box 24
Phillips BITS 162, 167, 168
Phillips screwdrivers 227, 229232
Pincers 256
Pin punches 274, 275
Pin wrench 330
Pipe cutters 270, 330
Pipe cutter wheels 270
Pipe wrenches 248, 249
Planishing hammers 300, 301
Plastic faced hammers 272
Plastic lever bar 304
Plastic pipe shears 271
Plastic side cutters 265
Pliers 240265
PowerGRIP pliers wrench 247
Pozidriv/Supadriv bits 162, 167
Pozidriv/Supadriv screwdrivers 227, 229, 230
Precision feeler gauges 321
Pry bar 303
Pullers 288290
Pull hook 331
Punch pliers 303
Piston ring compressors 320, 334

Q
Quick-change BIT holder 166
QuickRelease drive handle 103
QuickRelease extensions 104, 121, 137
QuickRelease ratchet insert tool 197
QuickRelease ratchets 102, 103, 119, 135
QuickRelease safety lock 189
QuickRelease sliding T-handle 104, 120, 136
QuickRelease universal joint 105, 121, 137

R
Ratchet adaptor 120, 135, 144, 197
Ratchet ring spanners 89, 90, 324
Ratchet spares 103, 120, 135, 136, 144, 146, 203, 204
Ratchet tap holders 279
Ratchet wrenches 8890, 165
Ratcheting bit holder 90, 106, 165
Ratchets 102, 103, 106, 119, 120, 135, 144, 146, 165
RATCHFIX ratchets 120
Recoil-less hammers 272
Relay pliers 241
Replacement milling cutter 304
Ring insert tools for torque wrenches 199, 200
Ring spanners
deep offset 83, 84
open 87, 88
shallow offset 85, 86
straight 86
TORX 87
Round nose pliers 242, 259, 262
Rubber composition hammer 272
Rubber inserts (for sockets) 114, 129, 323
Rubber rings (for sockets) 158161
Rubbish bin 12, 14, 24

S
Safety knife 282
Sales dispenser
for pliers 72
for sockets 1/4HH, 3/8HH, 1/2HH 72
Scrapers 276, 280, 305
Screw extractors 278
Screw pitch gauge 278

Screwdrivers 224236, 319


Screwdriver sockets 101, 102, 116, 132134, 143, 144,
319, 321, 322, 327
Scriber 280
Self-grip wrenches 249251
Self-retracting cutter 282
SENSOMASTER software 181, 192
Sensotork 191, 192, 216
Separating fixture 290
Service MANOSKOP torque wrenches 186, 187
SERVOMAT socket dispenser 1/41/2HH Y 72
Set-off pliers 303
Set of reversible screwdrivers 231
Set of wheels 15, 24
Shell tools for Manoskop torque wrenches 197203
Side cabinet 15, 17
Side cutters 252, 259, 260, 263265
Single-end spanners, adjustable 93
Single O/E spanners 93
Slide hammers 290
Sliding heads 144, 146
Sliding T-handles 104, 120, 136
Small bore pipe cutter 270
Snap-off blade cutter 282
Snipe nose pliers 243245, 259, 263
Sockets
1/4HH Y 98102
3/8HH Y 113116
1/2HH Y 127134
3/4HH Y 143, 144
1HH Y 146
multi-spline 320
spline-drive 101, 115, 130
4 pin 334
Socket sets
1/4HH Y 106111
3/8HH Y 122125
1/2HH Y 138141
3/4HH Y 145
1HH Y 147
SoftGRIP 82
Software for calibration 181, 192
Soldering gun 282
Soldering iron 282
Soldering wedges, wood 302
Spacing washers 270
Spare cutting wire 305
Spare parts for pipe cutters 270
Spare parts for ratchets 103, 120, 135, 136, 144, 146,
203, 204
Spare plastic heads (for hammers) 272
Spare nylon heads 272
Spark plug brush 323
Spark plug connector pliers 323
Spark plug sockets 114, 323, 324
Special extensions 121, 137, 320, 330
Special socket 168
Special tools for brakes and wheels 325327
Special tools for carburettors 226, 319, 320
Special tools for cars and trucks 319335
Special tools for chassies 322
Special tools for engine and gear transmission 328330
Special tools for HGVs 333335
Special tools for ignition and electrics 323
Special tools for lubrication service 327, 328
Special tools for pistons 320323
Special tools miscellaneous 330333
Speeder braces 104, 120, 136
Spinner handles 164
Spinner with bits magazine 164
Spiral cable 218
Spline drive combination spanners 85
Spline drive ratchet ring spanners 90
Spot weld drills 304
Spot weld milling cutter 304
Spray can and paper holder 17, 24
Spring clip 30
Square drive adaptor 219
Square lug 30
Standard partitions for SERVOMAT 72
Standard-Manoskop torque wrenches 188, 189
Steel fixers pincers 256
Steel rule 279
Stethoscope 321
Stillson pipe wrenches 249
Strap wrenches 327
Striking face O/E spanners 93
Striking face ring spanners 92
Striking sockets 92
Stud remover 278, 279
Suction lifter 304, 305
Swedish pattern wrenches 248
Swivelling tray 15

Testing tools for car electrics 324


Thread restorers 278
Thread taps 331
Three square bearing scraper 276
Three square scraper 276
Tin snips 303
Tommy bars 94
Tool box trolley 29
Tool boxes 22, 29
Tool cases 31
Tool displays 6972
Tool holder 203
Tool magazines 27
Tool sets 3169
Tool trolleys 1214, 17, 2022, 28
Tools for fitting/removing vehicle glass 304, 305
Tools for heater plugs 324
Tools for vehicle doors 304
Top cutters 253, 261
Torches 283, 284
TORQ-Set screwdriver 227
Torque angle gauges 203
Torque screwdrivers 168, 194, 195
Torque test equipment 209217
Torque wrenches 180193
TORSIOMAX torque screwdriver 194
TORSIOMETER torque screwdriver 195
TORX PLUS-bits 163
TORX-bits 162, 163, 167
TORX-insert tools 201
TORX-screwdrivers 224, 227230, 233236
TORX-sockets 100, 102, 115, 116, 129, 133, 134, 144
Transducer 211, 217
Trays, empty 148, 149
Tubular handles 91
Tubular hacksaw 277
Tweezers 284
Tyre levers 325, 333

U
UNIFLEX-sockets 100, 101, 114, 115, 129, 324
Universal joints 105, 121, 137, 144, 158160
USB adaptor 185, 192, 218

V
Valve adjustment tools 320322
VDE insulated pliers 262264
VDE insulated screwdrivers 228, 229
Veritrac windscreen removal set 304
Veritrac wind. replacement set 304
Vernier calliper 279
Voltage tester 231

W
Wallets, empty 78
Warding files 279
Waterpump pliers 247, 248
Wheel braces 325, 333
Wheel hub puller 290
Wheel nut sockets 157, 325
Wheely box 27
Windscreen removal set, Veritrac 304
Windscreen replacement set, Veritrac 304
Wire brushes 280, 326
Wire cutter 284
Wire insert awl 305
Wire insert probe 305
Wire stripping knife 283
Wire stripping pliers 254, 264
Wire twisting pliers 251
Work benches, mobile 23
Workshop sets 3142, 306318
Workshop torque tester SENSOTORK 216

T
Tape measure 279
Telescopic mirrors 281
Tension strap with ratchet 305

341

Assignment of spanner sizes to screws

Metric sizes

American sizes

1.6

h Square Head Set Screws


(No)

f Heavy
(No)

e Normal
(No)

Bolts and screws

d Machine Screw Nuts


(No)

b Square
(No)

a Normal
(No)

Nominal Size of Wrench

Nuts

Whitworth, small8)
SMS 1415

Whitworth, large8)
SMS 1413

Metric, small8)
SMS 1414

Swedisch
standard

Metric, large8)
SMS 1412

NFE 27-111-19308)

French
standard

Nut with flange6)

Screw with flange5)

Small hexagon4)

Large hexagon3)

German standard
DIN

Normal hexagon2)

Small hexagon

Normal hexagon

IS0 R 272
1968

Nut with flange

1.6

Screw with flange

3.2

Large hexagon

Standard hexagon

3.28
3.35
3.60
4.14
4.12
4.62
4.95
5.12
5.33
5.62
5.72
6.13
6.15
6.53
6.97
7.15
7.32
7.77
8.18
8.15
8.56
8.97
9.15
9.75
10.19
10.55
11.19
11.33
12.14
12.24
12.95
13.24
13.77
14.27
14.55
15.27
15.36
16.15
16.27

Nominal size of wrench, mm

3.22
3.23
3.52
4.01
4.02
4.52
4.83
5.02
5.21
5.52
5.59
6.00
6.03
6.40
6.82
7.03
7.19
7.62
8.03
8.03
8.41
8.81
9.03
9.60
10.04
10.39
11.04
11.18
11.99
12.04
12.80
13.04
13.60
14.05
14.38
15.05
15.18
15.98
16.05

Maximum dimension
mm1)

Minimum dimension
mm1)

DIN ISO
272

Thread diameters American standard ANSI

g Machine Screws
(No)

Thread diameters

c Heavy
(No)

Spanner opening
SW

1.6
1/8

123

3.5
2.5
4
4.5

2.5

2.5

2.5

5.5

5/32

01

3/16

23

345

10

68

1/4

1012

5/16

1/4

3/8

2.3
2.6
3

7/32
15/64
6

3.5

3.5

3.5

44.5

3.5

1/4
17/64
7

9/32
19/64
5/16
8

(5)7)

10

11

5.5
8

10*
56

5
21/64
11/32

3/8

10

1/4*

121/4

1/4

6
13/32

12
13

8
8

10

7
8

10

1/4

7/16
15/32

1/4

1/2

5/16

1/4

7/16

1/4

1/4

5/16

5/16

1/2

5/16

3/8

3/8

9/16

3/8

7/16

5/8

1/2

3/4

5/16

17/32
14

10

(8)7)

8
9/16

15

12

10

10

10

10

5/16

3/8

19/32
5/18
16

10

SP:M10

10

12

12

5/16

5/16

3/8

3/18

M14

16.77
17.05
17.58
18.05
19.06
19.18
19.97
20.06
20.78
20.86

16.95
17.30
17.75
18.30
19.36
19.38
20.17
20.36
20.98
21.16

21/32
17
18
19

12

SP:M12

14

10

12

(10)

(12)

12

14

12
(12)

16
14
(16)

12

10

10

12

12

3/8

11/16

7/16

3/4
25/32

1/2

3/8

7/16

11
7/16

7/16

20
13/16
20.8

1/2

9/16

SP:M14
M18

21.06
22.06
22.35
23.06
23.98
24.06
24.76
25.06
25.55
26.08
27.08
27.13
28.08
28.75
29.08
30.08
30.34
31.93
32.08
33.08
33.53
34.08
35.10
35.13
36.10

342

21.36
22.36
22.56
23.36
24.21
24.36
24.99
25.36
25.78
26.48
27.48
27.36
28.48
29.01
29.48
30.48
30.59
32.18
32.48
33.48
33.81
34.48
35.60
35.41
36.60

21
22

14

12

16

14
14

16

14
12
(14) 12

16

14

14

14
16

14

16

16

18

16

7/16

1/2

1214

23
24

12

20

7/8

9/16

1/2

15/16

5/8

9/16

1/2

7/8

1/2

16

16

5/8

5/8

31/32
25
1
26
27

18

16

20

18

20

18

16

20

16

18
1 1/16

28

5/8

5/8

5/8

3/4

1 1/8
29
30

5/8

16

SP:M18

3/4

3/4

11/8

3/4

18
20

18

20

20

22

20

24

20

20
1 3/16
1 1/4

32
33

22

24

(22) 20

20

3/4

22

20

36

24

22

22

20

24

22

3/4

11/4

7/8

1 5/16
34
35

3/4

1820 22
7/8

7/8

7/8

24
22
1 3/8

24

27

30

2224

13/8

Metric sizes

American sizes

1 7/16
37
38

27

24

27

30

27

24

1"

1 5/8
27

1"

30

27

30

33

30

h Square Head Set Screws


(No)

f Heavy
(No)

e Normal
(No)
1"

1 1/2

27

36

30

1"

1"

1 1/8
1 11/16
1 3/4

1 1/8 1 1/8

1 1/8

30
1 13/16

47

1 1/8

1 1/8

1 1/8 1 1/4
1 7/8

50

d Machine Screw Nuts


(No)

1"

27

42

46

7/8

24
1 1/2
1 9/16

41

Bolts and screws

7/8

33

30

33

36

33

30

33

1 1/4 1 1/4

1 1/4

33
2"

52

1 1/4

1 1/4

1 1/4 1 3/8
2 1/16

54

1 3/8 1 3/8

1 3/8

36
2 1/8

55

36

33

36

39

36

42

36
2 3/16

56

2 1/4
58
60

1 3/8

1 3/8

1 3/8 1 1/2
1 1/2 1 1/2

1 1/2

39
39

36

39

39

36

39

1 1/2 1 5/8
2 3/8
2 7/16

63

1 1/2

1 1/2

42
2 1/2

65

67
70

42

39

42

42

48

42

2 9/16
2 5/8

1 5/8

2 3/4

1 3/4

2 13/16
2 15/16

1 7/8

1 3/4

45
45

45

45

45

71

75

1 5/8 1 3/4

1 3/4 1 7/8

48

48

48

56

48

1 7/8 2"
3"

77

2"

52
3 1/8

80
82
85

52

52

52

52

2"

2"

2"

56
56

56

56
3 3/8

88
90
94
95

1 3/4

48

2 1/4

60
60

60

60

64

64

64

3 1/2

2 1/4

3 3/4
3 7/8

2 1/2

4 1/8
4 1/4

2 3/4

2 1/4

64

100 68
105 72

110 76

68
72

76

68
72

2 1/2

76

2 3/4

80

80

120 85

85

85

2 3/4

76
4 1/2

115 80
116

2 1/2

68
72

3"

80
4 5/8

3"

ASME/ANSI B 18.2.21987
1

b Square
(No)

1"

a Normal
(No)

7/8

Nominal Size of Wrench

Whitworth, small8)
SMS 1415

Nuts

Whitworth, large8)
SMS 1413

Metric, small8)
SMS 1414

Swedisch
standard

Metric, large8)
SMS 1412

NFE 27-111-19308)

French
standard

Nut with flange6)

Screw with flange5)

Small hexagon4)

Large hexagon3)

German standard
DIN

Normal hexagon2)

Small hexagon

Normal hexagon

IS0 R 272
1968

Nut with flange

Screw with flange

Large hexagon

37.01
37.60
38.60
38.61
40.20
41.60
41.81
42.60
42.93
43.38
45.03
46.60
46.61
47.60
48.21
50.60
51.44
52.60
53.04
54.72
54.61
55.72
56.26
56.72
57.84
58.72
60.72
61.06
62.64
63.72
64.24
65.72
65.86
67.46
67.72
70.72
70.69
71.72
72.26
75.51
75.85
77.09
77.85
80.31
80.85
82.85
85.85
86.72
88.85
89.92
90.85
94.85
95.85
96.34
99.52
100.85
106.00
105.97
109.14
111.00
115.57
116.00
117.00
118.77
121.00

Standard hexagon

Maximum dimension
mm1)

36.73
37.10
38.10
38.30
39.89
41.10
41.50
42.10
42.67
43.08
44.70
46.10
46.28
47.10
47.88
50.10
51.08
52.10
52.68
54.12
54.25
55.12
55.88
56.12
57.45
58.12
60.12
60.66
62.23
63.12
63.83
65.12
65.43
67.03
67.12
70.12
70.26
71.12
71.81
75.03
75.15
76.61
77.15
79.81
80.15
82.15
85.15
86.18
88.15
89.36
90.15
94.15
95.15
95.76
98.93
100.15
105.20
105.33
108.51
110.20
114.91
115.20
116.20
118.08
120.20

Nominal size of wrench, mm

Minimum dimension
mm1)

DIN ISO
272

Thread diameters American standard ANSI

g Machine Screws
(No)

Thread diameters

c Heavy
(No)

Spanner opening
SW

) maximum and minimum dimensions for metric sizes


according to DIN475/2 series 1 and ISO691 (machined
tolerances), American sizes according to ANSI B 18.2.1 +
ASME/ANSI B 18.2.2
2
) DINISO4014, 4016, 4017, 4018, 4032, 4034, 4035, 4036,
8673, 8674, 8675, 8676, 8765, sizes in brackets only
DIN 439, 555, 558, 601, 609, 610, 917, 931, 933, 934,
935, 936, 937, 960, 961, 979, 980, 985, 986, 1587,
2510/5, 6330, 6331, 7967, 7968, 79900
3
) DIN6914, 6915, 7999 (SW 21 + 34)
4
) DIN561, 564
5
) DIN6921, 6922
6
) DIN6923, 6926, 6927
7
) Standards prior to 1963
8
) old standards

3"

ANSI B 18.2.11981
a

) Hex Flat and Hex Flat Jam Nuts


Hex Nuts and Hex Jam Nuts
Hex Slotted Nuts
Hex Thick Nuts
Hex Thick Slotted Nuts
Hex Castle Nuts

) Square Nuts

) Heavy
Heavy
Heavy
Heavy
Heavy
Heavy

Square Nuts
Hex Flat Nuts
Hex Flat Jam Nuts
Hex Nuts
Hex Jam Nuts
Hex Slotted Nuts

) ANSI B 18.6.3 1972


e
) Square Bolts
Hex Bolts
Hex Cap Screws
Lag Screws
f
) Heavy Hex Bolts
Heavy Hex Structural Bolts
Heavy Hex Screws
g

) ANSI B 18.6.3 1972 (R 1983)


) ANSI B 18.6.2 1972 (R 1983)
* Square Bolt and Lag Screws only

SP= Spark Plug

343

Symbols used throughout this catalogue

Symbols

A
B
C
D
a
b
E
F
G
J
K
H
I
c
d
e
f
g
h
i
j
k
l
m
n
o
_

p
Y

Special Tools for


Spanner Opening
Spanner Opening for Hexagon Socket Head Screws

Carburettor, fuel injection systems

TORX size in mm
Outside Square

Valves, pistons

Inside Square
Inside Hexagon

Chassies, steering

Outside Hexagon
Pipe Diameter, inside

Car bodies

Pipe Diameter, outside


Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square)

Ignition, electric, electronic

Size of Shell Tool Carrier in mm (MANOSKOP) (Outside Square)


Open Ring Spanner, hexagon

Brakes, wheels

Open Ring Spanner, bi-hexagon


Socket, hexagon

Lubrication service

Socket, bi-hexagon
Socket, hexagon, AS-drive

Engine, drive train

Socket, bi-hexagon, AS-drive


Socket, bi-square

Other tools

Socket, spline-drive
for Socket Head Screw, hexagon
for Socket Head Screw, hexagon with guide pin

EDUARDWILLE GmbH & Co. KG

for Phillips-Recessed head Screws Phillips-Recess,

Lindenallee 27

registered trademark of Phillips Screw Company

P.O. Box 120103

for POZIDRIV/SUPADRIVScrews POZIDRIV/SUPADRIV,

42349 Wuppertal

registered trademark of European Industrial Services Ltd.

Germany

for Trisquare Socket Head Screws


for Inside TORX Screws

Tel. +49 202 4791-0

for Inside TORX Screws with hollow drive tip

Fax +49 202 4791-200

for Inside TORX PLUS Screws

info@stahlwille.de

for 5-star screws

www.stahlwille.de

for Outside TORX Screws


registered trademark of Fa. Acument Intellectual Properties, LLC, Rockford, Illinois, USA

WEEE-Reg.-Nr. DE 70431151

STAHLWILLE holds the Manufacturing Licence for TORX Tools

q
r
s
t
O
P
Q

for Spline Socket Head Screws Ribe-CV,

We reserve the right to alter dimensional

registered trademark of Richard Bergner GmbH&Co.

details in order to carry out improvements.

for Slotted Head Screws


for TRI-WING Screws, registered trademark of Phillips Screw Company

All photographs used in this catalogue represent

for TORQ-SET Screws, registered trademark of Phillips Screw Company

the tools as closely as possible to their natural

Diameter in mm

appearance. Model changes may take place

Anti-Slip-drive

without prior notice as in the case of design

High-Performance-Quality

improvements. We observe all legal requirements

Scale Range

relating to tools and safety.

Scale Division

Weight

All rights reserved.

Standard Pack (pieces)

E &OE

L
M
N
T
U
344

full flush cutting


semi flush cutting

Printed in Germany

standard bevel

Copyright by EDUARD WILLE GmbH & Co. KG,

Safety insulated as per IEC900 AC1000 V

Wuppertal

new items

Including prices

EDUARD WILLE GmbH & Co. KG


P.O.Box 12 01 03
42331 Wuppertal
Germany
Tel. +49 202 4791-0
Fax +49 202 4791-355
export@stahlwille.de
www.stahlwille.de

You might also like