You are on page 1of 11

PUBLIC MARKET

Market infrastructure is influenced by many factors, the most fundamental of which is the
size and use of selling space and its relationship to traffic circulation and parking. This
chapter reviews these issues, which include:
factors influencing food distribution in the rural and urban planning context;
major influences on market planning;
the accommodation brief, listing all the market development requirements;
design approach and options;
the site location and planning strategy;
utilization of space in markets;
the market master plan; and
summary of design issues to be included in the accommodation brief.
A. Introduction
Although the major concern of decision makers is with policy matters rather than operational
issues, their involvement in the physical planning process is also essential. The aim of their
involvement will be to ensure that the proposals make the best use of space. Rational
decisions on market infrastructure can only be made if the decision-maker can ask the right
questions. It is the intention of this chapter to guide this decision-making process.
B. Food Distribution and Rural and Urban Planning
There are four main factors relating to food supply and distribution which may ultimately
influence market planning and infrastructure provision:
increased food crop production, leading to surpluses being available for sale and to
a greater demand for marketing facilities in rural areas;
loss of agricultural land and kitchen gardens through urbanisation, both within and
on the edge of urban areas, necessitating supplies from more distant sources;
pressures caused by traffic growth and related congestion, requiring suitable sites to
be found for locating new wholesale and retail markets; and
changes in consumption habits creating the need for new cold storage facilities and
food processing industries.
These economic and social pressures increasingly force local authorities and other bodies
to question their attitude to the provision and control of marketing facilities. New policy
measures are needed, which will produce new approaches to planning and physical
arrangements.
C. Major Influences on Market Planning
Occasional Markets: Markets have always been transit points - the traditional periodic
markets or country fairs (including livestock markets) being the most obvious examples. In
the case of occasional markets, the sites are only temporarily used. Their most important
feature is not that they provide specific infrastructure for marketing, but that they take place
on the same day of the week or season, or once a year. These occasional markets are
often abandoned over time or relocated to new, more appropriate, locations. As land use
becomes increasingly constrained by land-value increases and the introduction of land-use
zoning and planning systems, it is necessary to specifically set aside land for market
development and to provide specialised infrastructure.
Truck Stops: The development of trucks at the start of the 20th century had a profound
effect on the distribution of food and this process is continuing. Developing countries, since
the 1960s, have been experiencing a major growth in truck traffic. Often, the trucks have
effectively become mobile workplaces, with the owners not really possessing any other
business assets. Examples of this are the practice of selling produce from the backs of
lorries (common in the Middle East and Eastern Europe) and the practice in the USA of
being able to plug-in refrigerated lorries when they reach a market rather than the market
itself constructing expensive facilities for short-term, cold-storage.
Changing Shopping Patterns - Shopping Malls and Supermarkets: Recent decades
have seen an evolution of the shopping centre from the corner and roadside strip shops to
the mega-malls of the USA and some Western European countries (such as the
hypermarkets of France). These facilities often combine one-stop retail shopping with
entertainment facilities. In some cases the development of supermarkets may completely
replace the traditional neighbourhood shops and retail markets. In parallel will be the
decline of the wholesale markets serving the older retail suppliers.
Impact on Location and Market Layout: The dominance of the truck has meant that there
has been a tendency to design (and redesign) market structures to provide adequate
parking and to facilitate an uninterrupted flow of goods. This has led to a demand for larger
sites, resulting in a tendency to decentralise facilities to the outskirts of cities where space is
available at a lower cost. With markets, this change of emphasis away from the structure of
the buildings (sometimes even to eliminate them), to the flow of produce, has resulted in the
development of new design characteristics. The market buildings have tended to become
transit sheds, leading to the elimination (or at least minimization) of storage facilities.
The key feature of market design has become the ease of circulation, parking and
manoeuvring of vehicles. For example, where the practice is to use larger trucks, the
incorporation in the design of loading bays becomes essential. How they are designed
(raised or at grade) will depend on how the produce is handled within the market
(mechanically or manually).
Poor Marketing Conditions: Poor conditions in markets are common. In smaller rural
markets and urban street markets a standard pattern is for there to be both fixed stalls and
temporary stalls. Demand for stalls in many markets is high and stall space is often limited,
thus the traders spill out on to adjacent streets (sometimes to avoid fee payments). Produce
is frequently displayed directly on the ground and exposed to the weather, resulting in high
losses. Facilities may be limited, usually with no main market sheds and no provision of
water supply or latrines. Such conditions also frequently exist in unimproved wholesale
markets.
D. The Accommodation Brief
The Process: Markets are the physical expression of the marketing system -involving a
complex mixture of social, management and economic factors. To prepare a master plan for
market development and, subsequently, to prepare infrastructure designs and budget costs,
will require an accommodation brief. This should, in principle, flow from the policy and
operational reviews discussed in the previous chapters. The brief will simply restate these
issues in physical terms. Initially, the preparation of the brief can be comparatively lacking in
detail, but it will need to be gradually firmed-up during the design process. The types of
information that the brief will need to contain are summarised at the end of this chapter.
There are five basic steps involved in preparing a brief:
definition of the problem (from Chapter 3);
definition of the activities that will need to be included in the market and the
equipment requirements (from Chapter 4), including any surveys needed to fill
information gaps;
definition of space requirements for the activities (from this chapter);
a synthesis of these factors to prepare a preliminary master plan and preliminary
budget. There may be one obvious solution or a number of options; and
after evaluation of the options, revision of the brief so it can form the basis for a final
master plan and can be used for the detailed design of buildings and infrastructure
(see Chapter 6).
Participation: The participation of market users is critical in all these stages and one
process for ensuring that this happens is described in Chapter 7. Those who will be
responsible for operating and maintaining the facility should also be included. This will apply
whether it is intended to modify an existing market, plan for future expansion needs or
develop a brief for relocating a market to a new site. If this consultation is not done
resentment is likely to occur and there may be strong resistance to market improvements or
to relocating.
Data Collection: Methods of collecting information from the users include group meetings
and workshops, watching how individual traders operate and asking them questions,
preferably using questionnaires and, in the case of wholesale markets, asking the traders
(and market visitors, such as producers and buyers) to keep a diary of their activities. As
many of the methods as possible should be used to cross-check the information. It is
important to remember that questions asking about market space requirements are likely to
lead to inflated demands and that the answers to direct questions on rents and charges are
unlikely to be realistic. It is important to have some form of site survey plan available to
discuss possible development options.
E. Design Approach and Options
In preparing a development it is likely that two basic situations will need to be considered:
Facilities at existing sites
In many cases the rehabilitation of existing markets is required. This would be done by:
the complete or partial replacement of existing facilities (which may create problems
of continuing the operation of a market during the demolition and construction
works);
the extension or alteration of the existing facilities (which may allow the continuing
operation of the market, but might involve too many design and management
compromises); and
the introduction of an operational technique such as facilities management, which
is a system that monitors the use of services to ensure that spaces are utilised as
effectively and economically as possible to create an acceptable internal and
external environment. This technique may be an alternative to the creation of new
facilities or may be implemented in addition to other measures.
Facilities at a new location
If an existing site becomes unsuitable or there is a need to create a completely new facility,
this could be done by:
the construction of new market facilities (at a green field site); or
the conversion and adaptation of existing facilities (for example where an existing
central food distribution warehouse or other building is converted into a market).
Providing new market facilities creates a number of design problems. A major consideration
will be the potential resistance by traders to change and to moving to a new location. Other
issues may also need to be resolved, including: (i) the potential competition between
markets and other distribution channels; (ii) the possibility of constructing facilities that are
too large; (iii) the type of institutional controls that will be appropriate for the new location;
and (iv) the issue of long-term viability of the market related to city and hinterland size. This
is particularly relevant with new wholesale markets and in a city with a population of less
than half a million a wholesale market is unlikely to be viable.
Planning and Design Alternatives: Usually the basic design approach is not immediately
obvious and a project may need to consider several alternatives and to evaluate which one
is preferable. The choice between modifying an existing facility or constructing a new one
should not be based on expediency or ill-informed decisions. It is necessary to approach the
problem by thinking clearly about what the facility has to do in order to offer solutions which
would function at the lowest cost and with the simplest form. The development of the
options should also take account of possible socioeconomic changes and any potential
environmental impact (such as pollution and noise impact). Many options are likely to be
available and there is unlikely to be one correct solution. However, in choosing options, care
is necessary to ensure that there is no over-design of physical facilities. The facilities will
have a limited life span (say 25 years) and will inevitably be subject to frequent change.
F. The Site Location and Planning Strategy Site Location
The choice of location of any market is a key decision, particularly for urban wholesale
markets. The question of location is closely bound up with that of transport, as markets are
essentially only transit stops. Transportation changes and evolving road networks will
significantly influence whether it is still viable for a market to remain in its present location or
whether a new site should be sought. The types of transport changes which will have an
impact are:
the privatisation of transport facilities (as in former centrally planned economies);
increased availability of different types of transport, such as animal carts being
replaced with small motorised vehicles or trucks replacing small pick-ups;
changes caused by the relocation of a bus station or by road improvements, such as
the construction of a ring road or a new interurban road which brings produce from
an entirely new direction; and
a trend for transport facilities to be used as mobile markets -including display in the
open and with direct selling from the trucks parking space.
The preferred location for markets is one with good access to a main road system and with
compatible adjacent land uses (such as catering and agribusiness industries). Urban retail
markets must be convenient for customers, preferably within walking distance of lower-
income housing areas. These location requirements will need to be balanced against other
factors such as the suitability of the site in terms of its cost, present ownership, size,
suitability for construction and availability of services. Optimum site locations will reduce the
financial costs of transportation for both sellers and buyers, lowering margins, and ultimately
decreasing the costs to consumers. In addition, the reduced costs also have an economic
and environmental impact in creating the opportunity for energy savings and for reducing
potential air and noise pollution.
Internal Traffic Flows and Congestion
Congestion is often the main factor influencing the need for market improvements.
Problems often occur where access is limited to only one operating entry and exit and
where the market authority uses the gate to control entry in order to maximise revenues. If
the lead-in length of the internal access road is also very short and the parking of vehicles is
not rigorously controlled, congestion is inevitable. Altering the road pattern to work on the
basis of a one-way system and extending or changing market trading hours may solve the
problem, but this will not help if the parking of vehicles inside the market is uncontrolled and
there is a lack of traffic management.
Market Lay-out
Market operations are influenced by management methods and by the physical lay-out.
They need to achieve:
an unobstructed traffic circulation pattern and effective parking control with adequate
parking facilities being provided;
maximum possibility for interaction between the market users leading to the
possibility of optimum price formation;
provision and full utilization of support facilities;
adequate arrangements for display and sale of produce to maintain produce quality;
and
efficient produce handling (such as by pallets and forklifts).
G. Utilization of Space in Markets
The optimum use of space in markets is one of the keys to their success. The fundamental
design decision relates to determining the core space of the market, i.e. the area in which
sales occur. This area includes both the area occupied by the traders and the local
circulation area needed to reach these stalls or premises. This area may be totally indoors
or may be a combination of covered space (such as a stall), combined with external
gangways or access platforms. The available sales space will have a direct relationship on
the rents that can be charged and will affect the markets throughput. In addition to the sales
space, allowance also has to be made for ancillary and supporting services, such as
administrative offices and banks. This process of calculating space requirements is
described below.
BOX 6
Market throughput and traffic volumes
1. Using estimates of consumption, it is possible to obtain an indication (in tons) of the level of existing
and future trade:
a) Start with the estimated annual total consumption (from Box 4) for target dates in 5, 10, 15, 20 and 25
years
b) Subtract produce by-passing the market (i.e. passing through competing markets or other marketing
channels.
c) The total of these figures is the existing market throughput (if available, check figures against records
of arrivals at the market).
d) Make adjustments for population growth and changes in marketing patterns for target dates in 5, 10,
15, 20 and 25 years.
e) Estimate total future market throughput for target dates (these figures can be adopted as upper limits
for future planning purposes).
2. Daily traffic levels for existing incoming traffic may be available from records or alternatively can be
estimated by dividing the total wholesale market throughput by the average load per vehicle and number
of trading days in a year.

Turnover: Annual turnover (in metric tons per square metre of the total market sales area)
is one of the main criteria used in the design of all markets. To be able to apply this
parameter, the key issue in the design of a market is to understand its throughput
(expressed in tons per day, week, month or year) and to relate this figure to the utilization of
space. On the basis of the estimates of supply, demand and consumption (see Box 5) the
next step in the design process is to estimate the total produce that is going through the
market (see Box 6). The throughput can then be used to estimate total requirements for
covered space and the number of parking spaces required for incoming and outgoing
vehicles.
Space Use: The theoretical turnover per square metre of covered space is in the range of
20 to 30 tons/square metre covered space for wholesale markets, 15 to 20 tons/square
metre for assembly markets and 5 to 10 tons/square metre for rural primary and urban retail
markets. These figures need to be used with some caution as they apply only to the areas
used for sales and ancillary uses. Space utilization is also influenced by the type of
packaging used as this determines the quantity of produce which can be stacked on a given
area. The standards take no account of the fact that, with rural markets, sales may occur
outside the periphery of the market and that with wholesale markets the majority of the
actual display and sales may occur in the parking areas immediately in front of the units,
which can reduce the net turnover per square metre by 50-75 percent. Details of typical
space standards are illustrated in Box 7.
Calculating Areas: Based on the space standards given in Box 7 the sequence for
calculating the area of buildings and the overall site, for both an existing and a new market,
is as follows:
1. Divide the projected annual market throughput (in tons) for a number of target years by
the sales space standard in tons per square metre/per annum to obtain the total sales
space requirements (covered and open). Adjust the figure to take account of different floor
levels. This sales space figure, less the space used for local pedestrian circulation, is the
area on which the stall rent or lease premium costs will be applied (the net lettable space).
This figure will normally equate to units of around 2 - 4 square metres per trader in small
retail markets and an average of around 100 square metres per trader in wholesale
markets. The sales space projections should be compared to information on the existing or
projected number of traders, to ensure that enough accommodation is being provided.
2. The next step is to add the following special uses to the total sales space requirements:
administrative office space @ 10 - 15 square metres per office worker (often
on more than one floor);
cleaners store plus guardhouse @ say 10 square metres for a small market
and 20 - 30 square metres for a larger market;
private toilets: 2 square metres @ per 25 market employees (male and
female separate);
public toilets: 2 square metres @ per 1,000 peak period market users (male
and female separate);
specialised uses (such as an auction slab, banana ripening rooms and public
cold stores); and
ancillary space for service users (such as banks, post office, catering facilities
and sales outlets for packaging materials).
3. The total of these figures is the net usable space. Some of the special uses are likely to
be part of the markets public provision, whilst others would be more efficiently provided by
the private sector.
4. An allowance should then be added for the general pedestrian circulation, such as main
walkways, of around 10 percent, which produces the total usable space.
5. Normally, a further allowance of 5 percent of the total usable space should be made for
the area that the building structure and infill walls will occupy and to take account of any
irregularities in the shape of the site (sometimes termed the fit factor). With very narrow
sites or irregular shapes the use of space will be more inefficient and an additional 10
percent may need to be added. Above this total figure (say 15 - 20 percent) the additional
costs that it imposes are likely to result in an inefficient market.
6. The grand total of these figures will be the gross market area. This will normally
correspond to the building area (although with smaller retail markets it will also include
some of the external public circulation area). For an existing market this figure can be
compared to the actual provision to see whether it is adequate and for a new market it can
be used to determine the area needed.
BOX 7
Common market sales space turnover standards
Type of market Annual throughput
(tons per m
2
/annum)
Rural fruit and vegetable open market average of 5 tons
Rural fruit and vegetable all-year assembly market 20 - 25 tons
Seasonal assembly market (3 - 4 month peak) 15 - 20 tons
Urban fruit and vegetable open market 5 -10 tons
Urban fruit and vegetable covered retail market 15 - 20 tons
Combined urban market (fruit, vegetables, fish, meat) 10 - 15 tons
Semi-wholesale fish, poultry, egg or meat market 5 - 15 tons
Semi-wholesale retail grain, potato or onion market 10 -15 tons
General urban wholesale market 20 - 30 tons
Source: FAO (1991). Wholesale markets: planning and design manual. FAO Agricultural Services Bulletin
No. 90 and FAO (1995). Retail markets planning guide. FAO Agricultural Services Bulletin No. 121.

Site Size: The overall site area required to accommodate the covered space should be in
the ratio of between 1: 4 and 1: 3. This would mean that for every square metre of covered
sales space an additional three to four square metres of site would be required.
Exceptionally, this factor can be reduced to 1:2.5 if the site area is very limited and
increased to 1: 5 if much of the trading is
likely to be undertaken in the open. The overall site area in square metres can thus be
derived by multiplying the gross market area by a factor of 2.5 to 5 to allow for traffic
circulation, parking areas and site landscaping. Decisions on road design, carriageway
widths, the size of parking bays and sidewalk widths will be fundamental in creating an
economic layout which achieves the turnover standard.
Time Perspective: The projected annual market throughput is for a specific point in time.
An issue that is always difficult to deal with is how to choose the right time perspective for
the project and how to deal with future expansion needs. The luxury of having a site that will
allow for very long-term expansion is rare and in most cases, it is not economic to build all
the accommodation at once. A rational approach would be to make the overall projections
for the site area based on the expected economic life of the buildings (usually 20-25 years)
and then to phase the construction so that buildings are generally fully utilised at all times.
The initial phase may be to construct premises suitable for, say, ten years. The space
standard adopted for the sales space should reflect present needs and also make some
allowance for future greater efficiency in use. A tight fit is preferable to leaving large areas
under-utilised and, consequently, not rented-out. Thus, the allocation of space within a
market has to cope with its present status (or, if a new market, with a first phase of
development) as well as longer term needs. Initially only part of the market premises may
be required. However, if the space occupied is concentrated in one area it may result in
congestion. Therefore, the leasing policy should ensure that the fullest use is made of all
the developed market area, but not cause short-term congestion nor prevent flexibility in
accommodating needs of future tenants.
H. The Market Master Plan:
The next step will be to prepare preliminary master plans for each option that needs to be
evaluated. In addition to the plans, the proposed land uses on the site should be tabulated
as this will form the basis of the budget estimates and phasing. A check list of the basic
questions to be considered in preparing plans is contained in Box 8.
BOX 8
Questions to be considered in designing a market master plan
does the accommodation brief and plans developed from it create an attractive and comfortable
environment which will allow the market to compete with other marketing outlets?
does the accommodation brief and plans reflect the perceived needs of the market users?
has a preliminary estimate been made of the total number of traders and area of sales space
required, based on the projected turnover of the market and the likely variation in daily turnover?
has account been taken of the different uses (i.e. fruit and vegetables, meat, fish, poultry, grains,
dairy products, clothing, household goods, etc.)
has a decision been made, for each different type of user, on the distribution between open and
covered spaces, based on an assumed (for new markets) or observed (for existing markets )
pattern of use (e.g. 90 percent open spaces in a weekly rural or assembly market, 100 percent
under cover in a central urban market)
is the market appropriate to the income and expenditure habits of the existing and potential
users?
does the plan reflect the markets overall management system and take account of existing
facilities?
are financial constraints under which the plan will have to operate recognised?
have minimum development standards been applied (e.g. health, safety and environmental
standards)?
does the plan provide a good layout in relation to climate, site geometry, optimum stall size and
simple circulation patterns?
does it provide sufficient space for vehicle parking, including cycles and motorcycles?
does the plan phase the development to take account of immediate urgent requirements and
longer-term needs?
have the proposals been discussed with traders to ensure their acceptability?

Market Congestion: Congestion within a market and the types of vehicles delivering and
collecting produce will have a significant impact on a markets efficiency. Wholesale
markets tend to have much higher turnovers in relation to their sales space because of the
larger quantities handled per trader and more effective management system of sales space
and traffic.
Impact of changing marketing patterns: As alternative marketing channels develop, it is
unlikely that practices such as the auctioning of truckloads of low-value produce will
continue to be undertaken within a market area. Producers are likely to develop direct links
to retailers. The establishment of farmers markets and the gradual development of
supermarket chains will also have a significant impact on produce flow and future retailing
patterns. The market master plan should attempt to foresee and accommodate such
changes. It is sensible, therefore, to be conservative in making the estimate of sales space
needed when there is already a perceived change occurring in the system. However, care
should be taken not to provide insufficient parking areas, which could lead to congestion
and may itself precipitate a decline in the use of the wholesale or retail market facility.
Desirable Market Characteristics: The main factors which should be taken into account
when improving an existing market or designing a new one are as follows:
adequate space provision is essential, for sales areas, storage, administration,
specialised facilities, circulation and, especially, parking;
ideally, this space provision should allow both for future expansion needs and for
adjusting the space utilization of the market to match management requirements to
meet changing social and economic circumstances;
building designs should also allow the maximum amount of flexibility for change;
for peak periods, and for simple rural and urban retail markets, emphasis should be
given to the use of low-cost covering of sales areas, either by using permanent light-
weight shade structures or retractable blinds;
building designs should avoid, as far as possible, different floor/road levels. These
prevent the use of both simple handcarts and more sophisticated handling facilities;
and
there are clear advantages for maximising market efficiency and for reducing
congestion by the adoption of an organised approach to traffic control and by using
controlled parking. This is usually achieved by segregating pedestrian and hand-cart
movement from heavy delivery vehicles


Agricultural produce is normally channelled through the following types of market:
a) Rural Primary Markets: In rural markets, trade is characterised by direct sales of small
quantities of produce by producers to village traders and by sales by retailers to rural
consumers. Rural markets form part of a trade network and are normally arranged on a
periodic basis on specific weekdays, and are commonly organised at a central place in a
village or district centre or beside the villages access road. In some instances, provincial
and district-level markets also serve this function, as well as providing an assembly function
(i.e. assembling produce in larger quantities for onward sale to outside buyers).
b) Assembly Markets: Larger rural markets are found where greater quantities of produce
are traded, either by the producers themselves or by traders. These assembly markets
(often combined with local rural markets), are normally situated on main highways, or near
to ferries and other local transport nodes. Produce is predominantly bought by traders or
collection agents on their own behalf or on behalf of urban wholesalers.
c) Wholesale Markets: Terminal wholesale and semi-wholesale markets are located within
or near major cities (usually with populations exceeding 0.5 million). These markets may be
supplied by purchasing or assembly centres in the rural areas or directly from farms, either
by traders or by large farmers. Transactions are predominantly handled by traders although
many wholesale markets incorporate farmers markets where farmers can sell directly to
retailers. Some markets also allow traders to sell to retailers off the back of the truck.
d) Retail Markets: These are markets directly serving consumers and are found in main
urban areas, such as provincial, town and city centres. Although primarily retail, they may
have some semi-wholesale functions, particularly if they allow farmers to trade. In that case,
they are often called farmers markets. This form is very typical in developing countries, but
there has also been a strong trend in the USA, the UK and other parts of Europe to create
farmers markets for the sale of specialised produce, such as organically-grown fruits and
vegetables.
e) Other Marketing Channels: Channels other than markets often exist, particularly in the
case of horticultural produce. These include on-farm sales, where collectors purchase the
produce (usually under contracts between the producers and distributors) and arrange
transport to wholesale outlets, packing houses or supermarkets. The extent to which this is
done depends primarily on the general state of development of the economy and the
demands of consumers.

You might also like