You are on page 1of 2

F

L
O
W
R
I
T
SCM2-Field
SCM2-Panel
SDU
FLOWRIT
Technical Sheet
Edition: 09/12 For further information, please contact us
FLRIT.260.001-E.d
Page 1/2
SMART FLOW FEEDERS FLOWRIT
Measures:
Channels 1 and 2 are both equiped with a digital load
cell. The rst one measures the material weight (F
R
)
acting perpendicularly on the chute, and the second
evaluates the speed (F
P
).
Accuracy better than 1 %
Feedrate from 3

t/h to 400 m
3
/h
Two mesuring channels with digital load cells
On line automatic taring system
Long lasting reliability
Easy maintenance
Free ow of material
FEEDING & METERING
Fly ash,
Ground slag,
Filter dust,
Raw meal, etc.
The unique FLOWRIT BY-PASS:
The BY-PASS diverts the material through the BY-PASS channel to
allow rst the cleaning by air-brush and secondly the automatic zero
calibration of the measuring channels during normal production.
The BY-PASS valve is pneumatically activated and the calibration
frequency is programmable in the controller.
The zero calibration is carried out during normal production
and operating conditions, without owrate interruption.
une exclusivit intelligente du Flowrit 6
BY-PASS position for
owrate measurement
By-PASS position for
on line zero calibration
Function:
Channel 1
Channel 2
Available in three sizes : 60, 200 and 400
FLOWRIT 60
FLOWRIT 400
with settling chamber
FLOWRIT 200
without settling chamber
F
R
F
P
* SCM2 : Field or Panel version:
see SCM2-F.260.001-E. or
SCM2-P.260.001-E.
Regulation:
The informations obtained allow the
controller to calculate the owrate
and to pilot the mechanical device
that regulates the incoming ow
according to the setpoint.
Controllers:
HASLER Group
Headquarter
Zi de labbaye
38780 PONT-EVEQUE - France
Tel. +33 (0)4 74 16 11 50
Fax +33 (0)4 74 16 11 55
E-mail: sales.fr@hasler-int.com
(1)
(2)
Our addresses are on:
FLRIT.260.001-E.d Page 2/2
FLOWRIT
Technical Sheet
Dimensions and owrange:
Temperatures:
+60 C < T < 120 C high temperature version
0 C < T < 60 C standard version
Material of construction for BY-PASS and measuring channels:
Stainless Steel AISI 316
Material of construction or the lining of parts in contact with the material may vary as a function of the
application. (ie : highly abrasive materials).
Compressed air supply requirement: 6 to 10 bars, R1/4
All pneumatic devices (pressure reducers, pressure gauges and distributers,...) are mounted on a single
panel at the back of the FLOWRIT.
(Dimensions including settling chamber)
Examples for FLOWRIT feeding
Protection class for electrical components on the FLOWRIT: IP65
Settling chamber (side view)
Technical Details
Archimedean screw Rotary star feeder Flow control gate
It conditions the material speed and
ow behavior at the FLOWRIT inlet.
Chains and rakes favor the de-aeration
of the material which is then conditioned
by adjustable gates and a siphon type
labyrinth. From there, it overows and
enters the measuring channels from a
clearly dened height and without any
initial horizontal speed.
Upper de-aeration conection (1).

A equilibration channel (2)
allows to compensate pressure
differential with the mesuring
compartment.
The settling chamber
Model
Length
mm
Width
mm
Height
mm
Weight
kg
Inlet Cross
Section mm
Outlet Cross
Section mm
Flowrange
FLOWRIT 60 740 560 1440 200 L 233 x l 114 L 233 x l 114 3 t/h 60 m
3
/h max
FLOWRIT 200 1600 860 2200 650 L 300 x H 360 max L 400 x l 556 15 200 m
3
/h max
FLOWRIT 400 1880 1260 1660 3100 1200-1500 L 550 x H 340 max L 490 x l 860 30 400 m
3
/h max
SMART FLOW FEEDERS FLOWRIT
(Dimensions with settling chamber for FLOWRIT 200 et 400)

You might also like