You are on page 1of 3

This document is uncontrolled when printed.

2014 Evolution Oil Tools Inc. All rights reserved.


www.eotools.com Toll Free: 1-800-265-TOOL
211-1X-TDS_Rev-B (DTA-XB)
April 2014 Artificial Lift Tools

DTA-XB - Dynamic Torque Anchor with Extra Bypass
Simple and effective anchoring for progressing cavity pumps with extra bypass

Applications
Tuning back-off for progressing cavity
pump applications .
Deep wells and horizontal wells
Heavy oil situations
Features & Benefits
Robust, reliable design
Spring-loaded anchor blocks
Simple to use
Provides Extra Bypass between the casing
and torque anchor
Prevents sand bridging around tool
Simple anchor design provides strength
and reliability
Patent Information
US - 5,275,239
Canada - 2,088,757
Other International Patents Pending




Description
The Evolution DTA-XB - Dynamic Torque Anchor has
been developed to provide extra bypass between the
casing and torque anchor. The extra bypass will allow
for unrestricted flow and will avoid sand bridging
around the tool.

The unique patented design allows for easy running
and retrieval in a variety of downhole conditions
including:

Deep Wells
Horizontal Wells
Heavy Oil

The DTA-XB uses wedge shaped anchoring blocks
which bite into the casing was when right hand torque
is generated in the tubing string. These anchoring
blocks are spring loaded so that transfer of torque to the
casing is immediate (clockwise). The design of the
anchoring blocks requires, only a simple engaging and
disengaging procedure.

The running procedure of the DTA-XB is as simple as
the design itself. The anchor installed below the pump
and can be run in and out of the well freely. When the
anchor has reached the required depth, the application
of approximately 300 ftlbs (400 NM). righthand
torque will securely engage the anchoring blocks to the
casing wall. The setting torque may now be locked in
and the pump operation started. To disengage the
anchor, simply stop the pump operation and relax the
initial setting torque.






DTA-XB - Dynamic Torque Anchor

www.eotools.com
Operation
The anchor should be run into the first joint of casting for an initial
function test. This is accomplished by setting the anchor with 300 ft.
lbs. of righthand torque to ensure proper engagement with the
casing in the well. Once this function test is completed the torque may
be relaxed and the anchor run to its required setting depth.

When the anchor has reached the required depth, apply approximately
300 ft.lbs. (400 NM) of right hand torque to securely engage the
anchoring blocks to the casing wall. Pretorquing the tubing string will
avoid engaging disengaging the anchor when starting and stopping
the pump.

The setting torque may now be locked and the pump operation started.

The running procedure of the DTA-XB is as simple as the design itself.
The anchor is installed below the pump and can be run in and out of
the well freely. When the anchor has reached the required depth, the
application of approximately 300 ftlbs. right hand torque will securely
engage the anchoring blocks to the casing wall. The setting torque may
now be locked in and the pump operation started. To disengage the
anchor, simply stop the pump operation and relax the initial setting
torque.

Specifications
Casing OD


Product
Number
Tool OD Tool ID Tool Length Connections* Total Annular
Area (in)
inch mm inch mm inch mm inch mm inch
4-1/2 114.3 102381 3.63 92.20 2.00 50.8 24.0 609.6 2-3/8 EU 4.47
5-1/2 139.7 102382 4.25 107.95 2.44 62.0 24.0 609.6 2-7/8 EU 8.26
7 177.8 102383 5.63 143.00 2.44 61.98 24.0 609.6 2-7/8 EU 14.07
7 177.8 102384 5.63 143.00 3.00 76.2 24.0 609.6 3-1/2 EU 12.24
8-5/8 219.1 102385 7.25 184.20 3.00 76.2 26.0 660.4 3-1/2 EU 23.10

Work Range
Tool Size Tool OD with Retaining Torque Anchor Working Range
(Casing OD) Blocks Fully Collapsed (Casing ID)
inch mm inch mm inch mm
4-1/2 114.3 3.63 92.2 3.83-4.09 97.2-103.9
5-1/2 139.7 4.44 111.8 4.67-5.04 118.6-128.1
7 177.8 5.83 148 6.09-6.54 154.8-166-1
8-5/8 219.1 7.5 190.5 7.51-8.10 190.8-205.7


This document is uncontrolled when printed.
2014 Evolution Oil Tools Inc. All rights reserved.
www.eotools.com Toll Free: 1-800-265-TOOL
211-1X-TDS_Rev-B (DTA-XB)
April 2014 Artificial Lift Tools




CANADA
#3, 1820 30
th
Ave NE
Calgary, Alberta T2E 7M5
Toll Free: 1-800-265-TOOL (8665)
Main: 403-243-1442
Fax: 403-258-2614

6415A - 63 St. Close
Lloydminster, Alberta T9V 3B5
Tel: 780-522-8294
Fax: 780-875-6337

4512 81 Ave
Edmonton, Alberta
Tel: 587-758-9091
Cell: 780-919-1722
Cell: 780-893-1019

UNITED STATES OF AMERICA
P.O. Box 5363
2908 Coffey Street
Victoria, Texas 77903
Main: 361-575-7900
Fax: 361-575-8081

2400 Kermit Hwy
Odessa, Texas 79764
Cell: 432-638-7902




www.eotools.com

You might also like