You are on page 1of 7

FILLER SLAB

The Concept doesn't come in the way of structural strength and gets things done in an
economical way

There is a lot of difference between cheap construction practices and cost effective ones. While
taking up construction, most fail to appreciate the difference and end up spending quite a bit of
theirmoney. This against a possibility of cost - effective options that while ensuring good and
efficient construction also leaves you with a substantial saving.

Ads by SmileysWeLoveAd Options

Expert calculations suggest that cost-effective construction will have you
saving at least 25 per cent of the cost that otherwise would have into
your home. The quest for cost-effective, innovative and environment-friendly housing has
focused on the appropriate use of locally available materials, skill and technology without
compromising on the quality and life of the structure.
Filler slabs are one such cost - effective roofing system which is based on the concrete portions
and instead placing filler material there. The material used as a replacement includes bricks,
tiles, cellular concrete blocks.




Reinforced concrete
The filler slab is based on the principle that for roofs which are simply supported, the upper
part of the slab is subjected to compressive forces and the lower part of the slab experience
tensile forces. Concrete is very good in withstanding compressive forces and steel bears the
load due to tensile forces. Thus the lower tensile region of the slab does not need any concrete
except for holding the steel reinforcements together.

Therefore in a conventional RCC slab lot of concrete is wasted and it needs extra reinforcement
due to added load of the concrete which can otherwise be replaced by low-cost and light
weight filler materials, which will reduce the dead weight as well as the cost of the slab
to 25% (as 40% less steel is used and 30% less concrete).
The filler slabs also result in fewer loads getting transferred to the load-bearing walls and the
foundations. The air gap in between the tiles makes it a good heat insulator and the ceiling
looks attractive as well.


Filler slab as projection, creating an interesting articulation.
The mechanism
The filler slab is a mechanism to replace the concrete in the tension zone. The filler material,
thus, is not a structural part of the slab. By reducing the quantity and weight of material, the
roof become less expensive, yet retains the strength of the conventional slab. The most popular
filler material is the roofing tile. Mangalore tiles are placed between steel ribs and concrete is
poured into the gap to make a filler slab. The structure requires less steel and cement and it is
also a good heat insulator.



Strength of filler slabs.
Conventional tests by different institutions and laboratories has proved the load bearing
capacity of filler slab and found it no less in performance from the conventional R.C.C. slab.
Since filler roof tiles are firmly bonded to and covered by concrete, it does not collapse under
the impact of say, a coconut falling on the roof.

Leak proofing filler slabs.
With proper supervision and workmanship, leaks can be avoided. The chance of a leak in a filler
slab is much the same as the conventional R.C.C.slab.

Saving on cost
The savings on cost can be from 15 per cent to 25 per cent. But designing a
filler slab requires a structural engineer to determine the spacing between the reinforcement
bars.
Other favored filler materials include clay pots, stabilized mud blocks, brick or brick panel,
broken pieces of cement blocks and even coconut shells. The quantity of concrete in the
tension zone of the slab that can be replaced by a filler material depends upon the shape of the
filler material and the thickness of the solid slab.


Thermal insulation
The air pocket formed by the contours of the tiles makes an excellent thermal insulation layer.
The design integrity of a filler slab involves careful planning taking into account the negative
zones and reinforcement areas.

Patterned ceilings
Filler slabs provide aesthetically pleasing patterned ceilings. In most houses, the filler material is
left open without plastering to form aesthetic design symmetry but some residents prefer to
cover the space with Plaster of Paris coating.


Different patterns in ceiling can be attained


Thus the filler slab as the roof has the following
advantages:
Consumes less concrete and steel due to reduced weight of slab by the introduction of a
less heavy, low cost filler material like two layers of burnt clay tiles. Slab thickness minimum
112.5 mm.
Enhances thermal comfort inside the building due to heat-resistant qualities of filler
materials and the gap between two burnt clay tiles.
Makes saving on cost of this slab compared to the traditional slab by about 23%.

You might also like