Professional Documents
Culture Documents
Request: Electra/Huawei
Document Information
Prepared by: R & D Group
Author(s): Harman PS Grewal
Document creation date: 6-19-13
Revision History
Re
v.
1
2
3
4
5
6
7
Date
6-19-13
Author
Harman
Description
Initial Draft
Document Approvals
Approver
Onur Yildirim
Organization
Telecom Technology Services Inc.
Date
6-19-13
The information in this document is intended for Telecom Technology Services, Inc. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purposes, without
written permission of Telecom Technology Services, Inc.
1) Site Plan
First Step involved in creating S-info is Site Plan table, source file for creating Site plan is csv or .xls file
containing physical information for all the sites in the given area. This contains all the basic information
i.e. Site ID, Cell name, Latitude, Longitude, M-tilt, E-tilt just a few to mention. Attached xls sheet below is
a sample source file for Site Plan table creation.
GSM_UMTS_SITE_DA
TA.XLSX
Go to Home Cells Create/Merge Select Create Site plan (as shown below)
After Selecting Create Site Plan new Window shows up as shown below
User has options for Creating Cellname, Sitename and Sector Symbol Option
Column Setup: This is the most crucial part, user needs to match the Column names and
Column # from Input Source file.User also has option to save this sequence as Default using
Save Default option. Site name, Cell name, Latitude and Longitude , Azimuth, LAC
& CI are mandatory parameters for creating Site plan, others can be skipped(if un available)
With the information put in, Hit Create and Opt PCS will Start processing, results stored in
the Output Site-plan Location and loaded in Opt PCS as shown in Fig 03 below.
Site Plan has only Physical Parameters only i.e. Latitude, Longitude ,Azimuth, Height etc etc
3) S-info
With the Site plan created the next step is to create S-info which will require the corresponding CMConfiguration Management also known as Switch data which contains all the important parameters all
the site RNC vise for a given market.
Similar to Site plan creation, user needs to
After selecting create SInfo UMTS new window shows up as shown above in Fig 05
Input Source: This would be the Site Plan created in Step 1 using Site Data
Executions: Gives users an option whether to create new S-info or append to existing
one(mostly its creating new)
Vendors: Opt PCS has the capability to create S-info for different Vendors viz a viz
Ericsson, Lucent (ALU) and Nokia for each of these we have GSM, UMTS and LTE
separately. Electra or Huwaie is closer to Ericson, so Ericson option can be used as of
now, albeit a new radio button can be added as the need arises.
Matching Key: very Import to select the matching key either with CI or cell name, it
depends on the CM data and the site plan created.
Cell Name: Another important selection: cell name should be from Site Plan or Switch
Dump(CM File)
Switch Data: User needs to select/Upload the CM XML file here. User can upload
multiple XML files as per requirement.
Output Location: User needs to specify the Output path where S-Info will be stored.
Once the Processing is done, Sinfo created is uploaded in Opt PCS and result folder can be
checked for set of files for the S-Info.