Professional Documents
Culture Documents
V100R007C00
02
Date
2011-08-25
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 02 (2011-08-25)
PRS
Performance Report Reference
Overview
This section describes the counters and meanings of the predefined report templates of the
PRS.
Product Version
The following table lists the product version related to this document.
Product Name
Product Version
PRS
V100R007C00
Intended Audience
This document is prepared for network planning engineers and network management engineers.
Change History
02 (2011-08-25)
This issue is the second official release. Compared with issue 01 (2011-05-20) of V100R007C00,
this issue does not incorporate any changes.
01 (2011-05-20)
This issue is the first official release. Compared with issue Draft A (2011-04-15) of
V100R007C00, this issue does not incorporate any changes.
Issue 02 (2011-08-25)
ii
PRS
Performance Report Reference
Draft A (2011-04-15)
This issue is a draft. Compared with issue 04 (2011-01-15) of V100R006C00, this issue does
not incorporate any changes.
Issue 02 (2011-08-25)
iii
PRS
Performance Report Reference
Contents
Contents
About This Document.....................................................................................................................ii
1 ASNGW Performance Report.....................................................................................................1
1.1 ASNGW NE Report...........................................................................................................................................2
iv
PRS
Performance Report Reference
Contents
PRS
Performance Report Reference
Contents
vi
PRS
Performance Report Reference
Contents
vii
PRS
Performance Report Reference
Contents
viii
PRS
Performance Report Reference
Contents
ix
PRS
Performance Report Reference
Contents
PRS
Performance Report Reference
Contents
Issue 02 (2011-08-25)
xi
PRS
Performance Report Reference
Issue 02 (2011-08-25)
PRS
Performance Report Reference
NE Type
ASNGW
Object Type
ASNGW
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
ASNGW
Number of Received
PPP Negotiation
Packets
numb
er
PPPC
Performance
Measuremen
t
(WASN9770
)
numb
er
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of Received
Invalid PPP
Negotiation Packets
numb
er
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of
Successful LCP
Negotiations
times
PPPC
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of LCP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of
Successful IPCP
Negotiations
times
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of IPCP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of
Successful CCP
Negotiations
times
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of CCP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of Received
Stac LZS
Compressed Packets
numb
er
PPPC
Performance
Measuremen
t
(WASN9770
)
numb
er
PPPC
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Received
Microsoft Point-toPoint Compressed
Packets
numb
er
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of Sent
Microsoft Point-toPoint Compressed
Packets
numb
er
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of
Successful PPP
Negotiations
times
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of PPP
Negotiation
Attempts
times
PPPC
Performance
Measuremen
t
(WASN9770
)
Number of Received
L2TP Control
Packets
numb
er
L2TP
Performance
Measuremen
t
(WASN9770
)
Number of Received
Invalid L2TP Control
Packets
numb
er
L2TP
Performance
Measuremen
t
(WASN9770
)
Number of Sent
L2TP Control
Packets
numb
er
L2TP
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of L2TP
Tunnel Setup
Attempts
times
L2TP
Performance
Measuremen
t
(WASN9770
)
Number of
Successful L2TP
Tunnel Setup Times
times
L2TP
Performance
Measuremen
t
(WASN9770
)
Number of L2TP
Session Setup
Attempts
times
L2TP
Performance
Measuremen
t
(WASN9770
)
Number of
Successful L2TP
Session Setup Times
times
L2TP
Performance
Measuremen
t
(WASN9770
)
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Uplink
Packets on the R3
Interface
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Downlink
Packets on the R3
Interface
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Error
Downlink Packets on
the R3 Interface
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Packet
Throughput on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Packet
Throughput on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Uplink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Uplink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Downlink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Downlink
Packet Rate on the
R3 Interface
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Uplink
Packets on R4 and R6
Interfaces
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Downlink
Packets on R4 and R6
Interfaces
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Error
Uplink Packets on R4
and R6
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Packet
Throughput on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Packet
Throughput on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Uplink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum Uplink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Downlink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Downlink
Packet Rate on R4
and R6 Interfaces
(WASN9770)
packe
ts/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Uplink Packets
Exceeding 1500
Bytes on R4 and R6
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Downlink Packets
Exceeding 1500
Bytes on R3
(WASN9770)
packe
t
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Downlink Traffic on
the R3 Interface (KB)
(WASN9770)
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Downlink Traffic on
the R3 Interface
(MB) (WASN9770)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Throughput
on the R3 Interface
(KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
10
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum
Throughput on the
R3 Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Throughput
on the R3 Interface
(MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum
Throughput on the
R3 Interface (MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Uplink
Rate on the R3
Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
11
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Downlink
Rate on the R3
Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Downlink
Rate on the R3
Interface (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Uplink Traffic on R4
and R6 Interfaces
(KB) (WASN9770)
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Downlink Traffic on
R4 and R6 Interfaces
(KB) (WASN9770)
kiloby
tes
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Uplink Traffic on R4
and R6 Interfaces
(MB) (WASN9770)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
12
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink Traffic on
R4 and R6 Interfaces
(MB) (WASN9770)
MB
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Throughput
on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum
Throughput on R4
and R6 Interfaces
(KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Throughput
on R4 and R6
Interfaces (MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum
Throughput on R4
and R6 Interfaces
(MB/s)
(WASN9770)
mb/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
13
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Uplink
Rate on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Average Downlink
Rate on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Maximum Downlink
Rate on R4 and R6
Interfaces (KB/s)
(WASN9770)
kiloby
tes/
secon
d
Data Plane
Based
Forwarding
Performance
Measuremen
t
(WASN9770
)
Number of Received
EAP-Start Messages
(WASN9770)
packe
t
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
14
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
packe
t
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
packe
t
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
Number of
Successful
Authentication
Responses
(WASN9770)
times
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
Number of
Authentication
Requests
(WASN9770)
times
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
Authentication
Requests
(WASN9770)
times
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
15
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
numb
er
Authenticati
on
Performance
Measuremen
t
(WASN9770
)
Number of
Successful
Accounting Start
Responses
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of
Accounting Start
Requests
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
Accounting Start
Requests
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
16
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of
Successful InterimUDR Updates
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
Interim-UDR Update
Requests
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of
Successful
Accounting End
Responses
(WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of
Accounting End
Requests
(WASN9770)
numb
er
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
Accounting End
Requests
(WASN9770)
numb
er
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
17
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Sent
Messages Carrying
UDRs (WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of
Successfully Sent
Messages Carrying
UDRs (WASN9770)
times
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of UDRs
Waiting to Be Sent
(WASN9770)
numb
er
Accounting
and UDR
Performance
Measuremen
t
(WASN9770
)
Number of Received
Invalid AAA
Messages
(WASN9770)
times
AAA
Performance
Measuremen
t
(WASN9770
)
Number of AAA
Link Interruption
Times (WASN9770)
times
AAA
Performance
Measuremen
t
(WASN9770
)
Number of Activated
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
18
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Number of
Activated Service
Flows (WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Maximum Number
of Activated Service
Flows (WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of UGS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of ertPS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of rtPS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of nrtPS
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of BE
Service Flows
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
19
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Users
with Dynamic IP
Addresses
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of Users
with Static IP
Addresses
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of DP
Registration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of
Successful DP
Registration Times
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of Re-sent
DP Registration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of DP
Deregistration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Number of
Successful DP
Deregistration Times
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
20
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Re-sent
DP Deregistration
Requests
(WASN9770)
times
Session
Performance
Measuremen
t
(WASN9770
)
Total Online
Duration of Users
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Average Online
Duration of Users
(WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of Activated
Users (WASN9770)
numb
er
Session
Performance
Measuremen
t
(WASN9770
)
Number of Access
Users (WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Average Number of
Access Users
(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
21
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum Number
of Access Users
(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of
Registration Updates
(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Network
Access Requests
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of
Successful Network
Access Times
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Success Rate of
Network Access
(WASN9770)
Network
Access
Performance
Measuremen
t
(WASN9770
)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
22
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Access
Authentication
Negotiation
Requests
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Access
Authentication
Negotiation
Responses
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Access
Capability
Negotiation
Requests
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of Access
Capability
Negotiation
Responses
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
23
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Sent
Access Negotiation
Responses
(WASN9770)
times
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of MIP
Users(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of PPPoE
Users(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Number of L2TP
Users(WASN9770)
numb
er
Network
Access
Performance
Measuremen
t
(WASN9770
)
Expiration of BS
Neighbor Parameter
Synchronization
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Success of Neighbor
Parameter
Synchronization of
BS (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
24
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success of Spare
Capacity Reporting
of BS (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Expiration of Spare
Capacity Reporting
of BS (Board)
times
Radio
Resource
Measuremen
t
(WASN9770
)
numb
er
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Paging
Initiation Times
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of
Successful Paging
Times (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Re-sent
Paging Initiation
Times (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Paging
Failure Times Due to
No Response
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
25
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Paging
Failure Times Due to
Other Reason
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Location
Update Requests
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Location
Update Responses
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Location Updates
Due to No Response
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Location Updates
Due to Rejection
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Location Updates
Due to Other Reason
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
26
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Requests
for Entering Idle
State (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Idle-State Entry
Times (Rejected)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Idle-State Entry
Times (Other
Reason)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Requests
for Exiting from Idle
State (WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failed
Idle-State Exit Times
(Rejected)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
27
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Failed
Idle-State Exit Times
(Other Reason)
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Radio Resource
Configuration
Update Requests
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Radio Resource
Configuration
Update Request
Success
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Radio Resource
Configuration
Update Request
Failure
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Received
Relay Messages
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of
Successfully Relayed
Messages
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Number of Failures
to Relay Messages
Due to No Next Hop
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
28
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Failures
to Relay Messages
Due to R4 Loop
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
Failure to Relay
Messages Due to
Mobile Forbidden
(WASN9770)
times
Radio
Resource
Measuremen
t
(WASN9770
)
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
29
PRS
Performance Report Reference
Issue 02 (2011-08-25)
30
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High Call
Drop
Rate Cell
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
31
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High Call
Drop
Rate Cell
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Congestion
Rate
TCH
Measuremen
t Function
32
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Congestion
Rate
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
33
PRS
Performance Report Reference
NE Type
BSC
Object Type
BSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Volume
Measure
ment
TCH Traffic
Access
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
34
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
TCH Traffic
Access
Measuremen
t Function
TCH Congestion
Rate
TCH
Measuremen
t Function
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
35
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
TCH Traffic
Access
Measuremen
t Function
TCH Congestion
Rate
TCH
Measuremen
t Function
TCH Availablity(%)
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of
1800/1900 cell]+[Configured
TCHs of 900/850 cell])*{100}
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
36
PRS
Performance Report Reference
Issue 02 (2011-08-25)
37
PRS
Performance Report Reference
NE Type
BSC
Object Type
BSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
38
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Other
Measuremen
t Function
Rate of Traffic
Volume to Call
Drops
none
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
BSC
Issue 02 (2011-08-25)
39
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Quality
Full Rate
Receiving
Level
Measuremen
t Function
40
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
41
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
42
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
43
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
44
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Downlink
Quality Identifier(%)
Full Rate
Receiving
Level
Measuremen
t Function
45
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
46
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
47
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
48
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
BSC
Issue 02 (2011-08-25)
49
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment requests])*
([Successful TCH seizures for
call]/[Attempted TCH seizures
for call]))*({1}-[SDCCH call
drop]/[Successful SDCCH
seizures (all)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
BSC
Issue 02 (2011-08-25)
50
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Attempted outgoing interBSC
inter cell handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Inter BSC outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Attempted incoming interBSC
inter cell handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Inter BSC incoming cell
handovers])*{100}
51
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Due-band Handover
Success Rate
(900-1800)(%)
Handover
Measuremen
t Function(1)
(([Successful intercell
handovers (900/850>1800/1900)]+[Successful
incoming BSC handovers
(900/850->1800/1900)]+
[Successful outgoing BSC
handovers (900/850>1800/1900)])/([Attempted
intercell handovers (900/850>1800/1900)]+[Attempted
incoming BSC handovers
(900/850->1800/1900)]+
[Attempted outgoing BSC
handovers (900/850>1800/1900)]))*{100}
Due-band Handover
Success Rate
(1800-900)(%)
Handover
Measuremen
t Function(1)
(([Successful intercell
handovers (1800/1900>900/850)]+[Successful
incoming BSC handovers
(1800/1900->900/850)]+
[Successful outgoing BSC
handovers (1800/1900>900/850)])/([Attempted
intercell handovers
(1800/1900->900/850)]+
[Attempted incoming BSC
handovers (1800/1900>900/850)]+[Attempted
outgoing BSC handovers
(1800/1900->900/850)]))*
{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
52
PRS
Performance Report Reference
NE Type
BSC
Object Type
BSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Availabil
ity
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of 900/850
cell]+[Configured TCHs of
1800/1900 cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured SDCCHs])*
{100}
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Peak percentage of
CPU occupation(%)
CPU
Measuremen
t Function
53
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Busy
Cell
Erl
TCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of 900/850
cell]+[Configured TCHs of
1800/1900 cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured SDCCHs])*
{100}
54
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
55
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment requests])*
([Successful TCH seizures for
call]/[Attempted TCH seizures
for call]))*({1}-[SDCCH call
drop]/[Successful SDCCH
seizures (all)])*{100}
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Attempted outgoing interBSC
inter cell handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Inter BSC outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Attempted incoming interBSC
inter cell handovers])*{100}
56
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Inter BSC incoming cell
handovers])*{100}
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
57
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Idle Cell
Erl
TCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of 900/850
cell]+[Configured TCHs of
1800/1900 cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured SDCCHs])*
{100}
58
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
59
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment requests])*
([Successful TCH seizures for
call]/[Attempted TCH seizures
for call]))*({1}-[SDCCH call
drop]/[Successful SDCCH
seizures (all)])*{100}
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Attempted outgoing interBSC
inter cell handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Inter BSC outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Attempted incoming interBSC
inter cell handovers])*{100}
60
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Inter BSC incoming cell
handovers])*{100}
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
61
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hot Cell
Erl
TCH
Measuremen
t Function
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of 900/850
cell]+[Configured TCHs of
1800/1900 cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured SDCCHs])*
{100}
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
62
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment requests])*
([Successful TCH seizures for
call]/[Attempted TCH seizures
for call]))*({1}-[SDCCH call
drop]/[Successful SDCCH
seizures (all)])*{100}
63
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Attempted outgoing interBSC
inter cell handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Inter BSC outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Attempted incoming interBSC
inter cell handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Inter BSC incoming cell
handovers])*{100}
TCH
Measuremen
t Function
64
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Measuremen
t Function
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Issue 02 (2011-08-25)
65
PRS
Performance Report Reference
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
Erl
TCH
Measuremen
t Function
TCH
Measuremen
t Function
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of 900/850
cell]+[Configured TCHs of
1800/1900 cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured SDCCHs])*
{100}
66
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment requests])*
([Successful TCH seizures for
call]/[Attempted TCH seizures
for call]))*({1}-[SDCCH call
drop]/[Successful SDCCH
seizures (all)])*{100}
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
67
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Attempted outgoing interBSC
inter cell handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Inter BSC outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Attempted incoming interBSC
inter cell handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Inter BSC incoming cell
handovers])*{100}
TCH
Measuremen
t Function
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
68
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
69
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
TCH
Measuremen
t Function
TCH
Measuremen
t Function
SDCCH
Measuremen
t Function
TCH
Measuremen
t Function
Other
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
70
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
71
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Quality
Full Rate
Receiving
Level
Measuremen
t Function
72
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
73
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
74
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
75
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
76
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Downlink
Quality Identifier(%)
Full Rate
Receiving
Level
Measuremen
t Function
77
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
78
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
79
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
80
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
81
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment requests])*
([Successful TCH seizures for
call]/[Attempted TCH seizures
for call]))*({1}-[SDCCH call
drop]/[Successful SDCCH
seizures (all)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
82
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Attempted outgoing interBSC
inter cell handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Inter BSC outgoing cell
handovers])*{100}
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Attempted incoming interBSC
inter cell handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Inter BSC incoming cell
handovers])*{100}
83
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Availabil
ity
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of 900/850
cell]+[Configured TCHs of
1800/1900 cell])*{100}
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured SDCCHs])*
{100}
TCH
Measuremen
t Function
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
84
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Congestion
Rate(including
handovers)(%)
TCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
Erl
TCH
Measuremen
t Function
Total HalfRate
Traffic Volume(Erl)
Erl
TCHF/H
Measuremen
t Function(2)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
85
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IntraBSC
Handove
r Success
Rate
IntraBSC Handover
Success Rate(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Attempted
incoming internal inter cell
handovers]+[Attempted
outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
IntraBSC Handover
Success Rate Due to
Radio Reasons(%)
Inter-cell
Handover
Measuremen
t Function
(([Successful incoming
internal inter cell handovers]+
[Successful outgoing internal
inter cell handovers]+
[Successful intracell
handovers])/([Incoming
internal inter cell handovers]+
[Outgoing internal inter cell
handovers]+[Attempted
intracell handovers]))*{100}
OutgoingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Attempted outgoing interBSC
inter cell handovers])*{100}
OutgoingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful outgoing
interBSC inter cell handovers]/
[Inter BSC outgoing cell
handovers])*{100}
Outgoing
BSC
Handove
r Success
Rate
Issue 02 (2011-08-25)
86
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Incoming
BSC
Handove
r Success
Rate
IncomingBSC
Handover Success
Rate(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Attempted incoming interBSC
inter cell handovers])*{100}
IncomingBSC
Handover Success
Rate Due to Radio
Reasons(%)
Inter-cell
Handover
Measuremen
t Function
([Successful incoming
interBSC inter cell handovers]/
[Inter BSC incoming cell
handovers])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
87
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Setup
Success
Rate Due
to BSS
Random
Access
Measuremen
t Function
(([Successful immediate
assignments]/[Immediate
assignment requests])*
([Successful TCH seizures for
call]/[Attempted TCH seizures
for call]))*({1}-[SDCCH call
drop]/[Successful SDCCH
seizures (all)])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SDCCH
Availabl
e Rate
SDCCH Available
Rate(%)
SDCCH
Measuremen
t Function
([Available SDCCHs]/
[Configured SDCCHs])*
{100}
88
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SDCCH
Congesti
on Rate
SDCCH Congestion
Rate(%)
SDCCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
89
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Call
Drop
Rate
(includin
g
handover
s)
TCH
Measuremen
t Function
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
90
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Availabl
e Rate
Other
Measuremen
t Function
[Available TCHs]/
([Configured TCHs of 900/850
cell]+[Configured TCHs of
1800/1900 cell])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Traffic
Volume
per
Channel
(Max)
Erl
TCH
Measuremen
t Function
91
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Traffic
Volume
per
Channel
(Min)
Erl
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
92
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Uplink
Quality
Identifier
Full Rate
Receiving
Level
Measuremen
t Function
93
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
94
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
95
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
96
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
97
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Downlin
k Quality
Identifier
TCH Downlink
Quality Identifier(%)
Full Rate
Receiving
Level
Measuremen
t Function
98
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
99
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
100
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Issue 02 (2011-08-25)
101
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Issue 02 (2011-08-25)
102
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Attempt
Failure
Rate Due
to No
TCH
Assignm
ent
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Seizures
Success
Rate
TCH Seizures
Success Rate(%)
TCH
Measuremen
t Function
103
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Assignm
ent
Success
Rate
TCH Assignment
Success Rate(%)
TCH
Measuremen
t Function
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
104
PRS
Performance Report Reference
NE Type
BSC
Object Type
Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Immediat
e
Assignm
ent
Success
Rate
Immediate
Assignment Success
Rate(%)
Random
Access
Measuremen
t Function
([Successful immediate
assignments]/[Immediate
assignment requests])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
105
PRS
Performance Report Reference
Issue 02 (2011-08-25)
106
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High Call
Drop
Rate Cell
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic Channel)])
*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
107
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High Call
Drop
Rate Cell
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic Channel)])
*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
108
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
109
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High
Congesti
on Rate
Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
110
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Volume
Measure
ment
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
111
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
Channel
State
Measuremen
t per Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
112
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic Channel)])
*{100}
TCH availability(%)
Call Drop
Measuremen
t per Cell
{100}*[CR3027:Mean
Number of Available Channels
(TCHF)]/[CR301B:Mean
Number of Dynamically
Configured Channels (TCH)]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
113
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
Channel
State
Measuremen
t per Cell
TCH Taffic(Erl)
Erl
KPI
Measuremen
t per Cell
([R3551A:Number of Busy
Traffic Channels (TCHF)
(900/850/810 band)]+
[R3551B:Number of Busy
Traffic Channels (TCHF)
(1800/1900 Band)]+
[R3552A:Number of Busy
Traffic Channels (TCHH)
(900/850/810 band)]+
[R3552B:Number of Busy
Traffic Channels (TCHH)
(1800/1900 Band)])/
[R359:Number of Attempts to
Scan Channel States]
TCH Congestion(All
Busy)(%)
Channel
Configuratio
n
Measuremen
t per Cell
([K3020:TCH Seizure
Requests (Signaling Channel)]
+[K3010A:TCH Seizure
Requests (Traffic Channel)]+
[K3010B:TCH Seizure
Requests in TCH Handovers
(Traffic Channel)][CR443B:Completed
Handovers])/([K3020:TCH
Seizure Requests (Signaling
Channel)]+[K3010A:TCH
Seizure Requests (Traffic
Channel)]+[K3010B:TCH
Seizure Requests in TCH
Handovers (Traffic Channel)])
*{100}
TCH availability(%)
Call Drop
Measuremen
t per Cell
{100}*[CR3027:Mean
Number of Available Channels
(TCHF)]/[CR301B:Mean
Number of Dynamically
Configured Channels (TCH)]
114
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
115
PRS
Performance Report Reference
Issue 02 (2011-08-25)
116
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
LOGIC PORT
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LGCPRT
MEAN
TXRAT
E
T7507:Average
Transmit Rate of
Logical Port
kbit/s
Logical Port
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Issue 02 (2011-08-25)
117
PRS
Performance Report Reference
Object Type
MLPPP
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MLPPP
TXMEA
NSPEED
T7313:Mean
Transmit Rate of an
MP Group
kbit/s
MP Group
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
PPP
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PPP
TXMEA
NSPEED
T7358:Average
Transmit Rate of a
PPP Link
kbit/s
PPP Link
Measuremen
t
118
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
LCLS
USER
RATE
Call Drop
Measuremen
t per BSC
[R3830:Number of Successful
BSC local switching
Attempts]/([M318:Successful
Connections (TCHF) (Traffic
Channel)]+[M328:Successful
Connections (TCHH) (Traffic
Channel)])
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
119
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
BTS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SITE CS
USED
TS
RATE
T66001:Timeslot
Utilization Rate of
CS Service In a BTS
none
Utilization of
BTS
Timeslots
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Issue 02 (2011-08-25)
120
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SITE
LCLS
USER
RATE
Local Switch
Measuremen
t per Cell
([M318:Successful
Connections (TCHF) (Traffic
Channel)]+[M328:Successful
Connections (TCHH) (Traffic
Channel)])/[R3831:Number of
Successful BTS local
switching Attempts]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
121
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Performa
nce KPI
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
Performa
nce KPI
A9513:Successful
Uplink Assignment
Rate
none
Packet
Assignment
Capability
Measuremen
t
122
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
A9514:Successful
Downlink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
Uplink TBF
Congestion Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9003:Number of Failed
Uplink GPRS TBF
Establishments due to No
Channel]+[A9203:Number of
Failed Uplink EGPRS TBF
Establishments due to No
Channel])/([A9001:Number of
Uplink GPRS TBF
Establishment Attempts]+
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts])*{100}
Downlink TBF
Congestion Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9103:Number of Failed
Downlink GPRS TBF
Establishments due to No
Channel]+[A9303:Number of
Failed Downlink EGPRS TBF
Establishments due to No
Channel])/([A9101:Number of
Downlink GPRS TBF
Establishment Attempts]+
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts])*{100}
123
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9006:Number of Uplink
GPRS TBF Abnormal Releases
due to N3101 Overflow (MS
No Response)]+
[A9007:Number of Uplink
GPRS TBF Abnormal Releases
due to N3103 Overflow (MS
No Response)]+
[A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]+
[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/([A9002:Number
of Successful Uplink GPRS
TBF Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])*{100}
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9118:Number of Downlink
GPRS Intermit Transfers]+
[A9318:Number of Downlink
EGPRS Intermit Transfers])/
([A9102:Number of Successful
Downlink GPRS TBF
Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
124
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCHs
Occupied
by
Downlin
k TBF
Average Number of
TCHs Occupied by
EGPRS PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9321:Average Number of
Occupied Static EGPRS
PDCHs]+[AR9323:Average
Number of Occupied Dynamic
EGPRS PDCHs]
AR9319:Average
Number of Occupied
GPRS PDCHs
none
PDCH
Resource
Capability
Measuremen
t
AR9379:Average
Number of
Concurrent
Downlink EGPRS
TBFs on EGPRS
PDCH
none
PDCH
Resource
Capability
Measuremen
t
AR9375:Average
Number of
Concurrent
Downlink GPRS
TBFs on EGPRS
PDCH
none
PDCH
Resource
Capability
Measuremen
t
Average Number of
Concurrent
Downlink TBFs on
per EGPRS PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9379:Average Number of
Concurrent Downlink EGPRS
TBFs on EGPRS PDCH]+
[AR9375:Average Number of
Concurrent Downlink GPRS
TBFs on EGPRS PDCH]
125
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AR9371:Average
Number of
Concurrent
Downlink GPRS
TBFs on GPRS
PDCH
none
PDCH
Resource
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCHs
Occupied
by
Uplink
TBF
Average Number of
TCHs Occupied by
EGPRS PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9321:Average Number of
Occupied Static EGPRS
PDCHs]+[AR9323:Average
Number of Occupied Dynamic
EGPRS PDCHs]
126
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AR9319:Average
Number of Occupied
GPRS PDCHs
none
PDCH
Resource
Capability
Measuremen
t
AR9377:Average
Number of
Concurrent Uplink
EGPRS TBFs on
EGPRS PDCH
none
PDCH
Resource
Capability
Measuremen
t
AR9373:Average
Number of
Concurrent Uplink
GPRS TBFs on
EGPRS PDCH
none
PDCH
Resource
Capability
Measuremen
t
Average Number of
Concurrent Uplink
TBFs on per EGPRS
PDCH
numb
er
PDCH
Resource
Capability
Measuremen
t
[AR9377:Average Number of
Concurrent Uplink EGPRS
TBFs on EGPRS PDCH]+
[AR9373:Average Number of
Concurrent Uplink GPRS
TBFs on EGPRS PDCH]
AR9369:Average
Number of
Concurrent Uplink
GPRS TBFs on
GPRS PDCH
none
PDCH
Resource
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
127
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Paging
Performa
nce
A330:Delivered
Paging Messages for
CS Service
none
Abis
Interface
Paging
Measuremen
t per Cell
A331:Delivered
Paging Messages for
PS Service
none
Abis
Interface
Paging
Measuremen
t per Cell
A338:Number of
Expiries of the
Paging for CS
Services on the PCH
none
Abis
Interface
Paging
Measuremen
t per Cell
A340:Number of
Expiries of the
Paging for PS
Services on the PCH
none
Abis
Interface
Paging
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
128
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TBF
Assignm
ent
ZA9503:Number of
Uplink PS Immediate
Assignments per
BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
ZA9505:Number of
Uplink Assignments
on PACCH per BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
ZA9509:Number of
Downlink PS
Immediate
Assignments per
BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
ZA9511:Number of
Downlink
Assignments on
PACCH per BSC
none
Packet
Assignment
Capability
Measuremen
t per BSC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
129
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PDCH
Through
put
Average Throughput
of Uplink GPRS
RLC per PDCH
(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]*{20}/{1000})
Average Throughput
of Downlink GPRS
RLC per PDCH
(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9101:Total
Number of Downlink GPRS
RLC Data Blocks]*{20}/
{1000})
130
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per PDCH
(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8})/
(({1024}*([L9202:Total
Number of Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9203:Total Number of
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9204:Total
Number of Uplink EGPRS
MCS3 RLC Data Blocks]+
[L9205:Total Number of
Uplink EGPRS MCS4 RLC
Data Blocks]+[L9206:Total
Number of Uplink EGPRS
MCS5 RLC Data Blocks]+
[L9207:Total Number of
Uplink EGPRS MCS6 RLC
Data Blocks]+[L9208:Total
Number of Uplink EGPRS
MCS7 RLC Data Blocks]/{2}+
[L9209:Total Number of
Uplink EGPRS MCS8 RLC
Data Blocks]/{2}+
131
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 02 (2011-08-25)
132
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per PDCH
(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data Blocks]*
{22}+[L9312:Total Number of
Valid Downlink EGPRS
MCS2 RLC Data Blocks]*
{28}+[L9313:Total Number of
Valid Downlink EGPRS
MCS3 RLC Data Blocks]*
{37}+[L9314:Total Number of
Valid Downlink EGPRS
MCS4 RLC Data Blocks]*
{44}+[L9315:Total Number of
Valid Downlink EGPRS
MCS5 RLC Data Blocks]*
{56}+[L9316:Total Number of
Valid Downlink EGPRS
MCS6 RLC Data Blocks]*
{74}+[L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]*
{56}+[L9318:Total Number of
Valid Downlink EGPRS
MCS8 RLC Data Blocks]*
{68}+[L9319:Total Number of
Valid Downlink EGPRS
MCS9 RLC Data Blocks]*
{74})*{8})/(({1024}*
([L9302:Total Number of
Downlink EGPRS MCS1 RLC
Data Blocks]+[L9303:Total
Number of Downlink EGPRS
MCS2 RLC Data Blocks]+
[L9304:Total Number of
Downlink EGPRS MCS3 RLC
Data Blocks]+[L9305:Total
Number of Downlink EGPRS
MCS4 RLC Data Blocks]+
[L9306:Total Number of
Downlink EGPRS MCS5 RLC
Data Blocks]+[L9307:Total
Number of Downlink EGPRS
MCS6 RLC data blocks]+
[L9308:Total Number of
Downlink EGPRS MCS7 RLC
Data Blocks]/{2}+
[L9309:Total Number of
Downlink EGPRS MCS8 RLC
133
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data Blocks]/{2}+
[L9310:Total Number of
Downlink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Subscrib
er
Through
put
AL9529:Downlink
Throughput of GPRS
Users LLC PDU
kbit/s
Downlink
LLC Data
Transfer
Capability
Measuremen
t
134
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AL9530:Downlink
Throughput of
EGPRS Users LLC
PDU
kbit/s
Downlink
LLC Data
Transfer
Capability
Measuremen
t
AL9425:Uplink
Throughput of GPRS
Users LLC PDU
kbit/s
Uplink LLC
Data
Transfer
Capability
Measuremen
t
AL9426:Uplink
Throughput of
EGPRS Users LLC
PDU
kbit/s
Uplink LLC
Data
Transfer
Capability
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
135
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Handset
Type
Influence
to
VAMOS
analysis
VAMOS Traffic
Valume Ratio[%]
Channel
State
Measuremen
t per Cell
Calls Supporting
SAIC Ratio[%]
Measuremen
t of MS
Capability
per Cell
[A03628:Number of Calls
Originated or Terminated by
MSs Supporting SAIC]/
[A03640:Number of Calls]
Calls Supporting
VAMOS-1 Ratio[%]
Measuremen
t of MS
Capability
per Cell
[A03641:Number of
VAMOS-1 Calls]/
[A03640:Number of Calls]
Calls Supporting
VAMOS-2 Ratio[%]
Measuremen
t of MS
Capability
per Cell
[A03642:Number of
VAMOS-2 Calls]/
[A03640:Number of Calls]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
136
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS
Call
Drop
Ratio
Analysis
VAMOS CALL
Drop Ratio
(Demultiplexing)
VAMOS
Call
Measuremen
t for Cell
[H3061:Number of VAMOS
Call Drops (Demultiplexing
Handover)]/
((([A3100M:Number of
VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell Handover)]))*{2})*{100}
VAMOS CALL
Drop Ratio(Others)
VAMOS
Call
Measuremen
t for Cell
[H3062:Number of VAMOS
Call Drops (Other Handover)]/
((([A3100M:Number of
VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell Handover)]))*{2})*{100}
137
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS CALL
Drop Ratio(Stable
State)
VAMOS
Call
Measuremen
t for Cell
[H3063:Number of VAMOS
Call Drops (Stable State)]/
((([A3100M:Number of
VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell Handover)]))*{2})*{100}
VAMOS CALL
Drop Times Ratio
VAMOS
Call
Measuremen
t for Cell
([H3061:Number of VAMOS
Call Drops (Demultiplexing
Handover)]+[H3062:Number
of VAMOS Call Drops (Other
Handover)]+([H3063:Number
of VAMOS Call Drops (Stable
State)]/((([A3100M:Number
of VAMOS Channel
Multiplexing Commands
(Assignment)][A3100N:Number of Failed
VAMOS Channel
Multiplexing Attempts
(Assignment)])+
([H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]-[H3053:Number
of Failed VAMOS Channel
Multiplexing Attempts (IntraCell Handover)]))*{2})*
{100}))/([CM33:Call Drops on
Traffic Channel]*{2})*{100}
138
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS
Influence
to
Network
Total
Performa
nce
Analysis
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
VAMOS Traffic
Valume Ratio[%]
Channel
State
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
139
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VAMOS
Radio
Handove
r Success
Ratio
Analysis
Successful Ratio
Radio Handover by
VAMOS Channel
Multiplexing
VAMOS
Call
Measuremen
t for Cell
[H3052:Number of VAMOS
Channel Multiplexing
Commands (Intra-Cell
Handover)]/([H3052:Number
of VAMOS Channel
Multiplexing Commands
(Intra-Cell Handover)][H3053:Number of Failed
VAMOS Channel
Multiplexing Attempts (IntraCell Handover)])*{100}
Successful Ratio
Radio Handover by
VAMOS Channel
Demultiplexing
VAMOS
Call
Measuremen
t for Cell
[H3056:Number of VAMOS
Call Handover Commands
(Demultiplexing)]/
([H3056:Number of VAMOS
Call Handover Commands
(Demultiplexing)][H3059:Number of VAMOS
Call Handover Commands
(Others)])*{100}
140
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Ratio
Radio Handover
(Other VAMOS
Call)
VAMOS
Call
Measuremen
t for Cell
[H3059:Number of VAMOS
Call Handover Commands
(Others)]/([H3060:Number of
Failed VAMOS Call Handover
Attempts (Others)][H3060:Number of Failed
VAMOS Call Handover
Attempts (Others)])*{100}
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
Unsuccessful Vamos
Call Handovers Ratio
VAMOS
Call
Measuremen
t for Cell
([H3053:Number of Failed
VAMOS Channel
Multiplexing Attempts (IntraCell Handover)]+
[H3059:Number of VAMOS
Call Handover Commands
(Others)]+[H3060:Number of
Failed VAMOS Call Handover
Attempts (Others)])/
(([CH301:Internal Intra-Cell
Handover Commands][CH303:Successful Internal
Intra-Cell Handovers])+
([CH321:Number of Incoming
Internal Inter-Cell Handover
Responses]-[CH323:Number
of Successful Incoming
Internal Inter-Cell
Handovers]))*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
141
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Accessab
lity KPI
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
Assignment Success
Rate
none
Assignment
Measuremen
t per Cell
[CA313:Successful
Assignments]/
[CA310:Assignment Requests]
*{100}
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
142
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Assignment
Measuremen
t per Cell
([CA313:Successful
Assignments]([A3100K:Assignment
Requests (Signaling Channel)
(SDCCH)]+[A3100A:Assignment Requests (Signaling
Channel) (TCH)][A312S:Failed Assignments
(Signaling Channel)]+
[CA310A:Assignment
Requests (TCH Assigned
Repeatedly over A Interface)][CA312A:Failed Assignments
(TCH Assigned Repeatedly
over A Interface)]))/
([A3039J:SDCCH Seizures for
Speech Service]+
[A301F:TCHF Seizures for
Speech Service]+
[A301HH:TCHH Seizures for
Speech Service])*{100}
BSS Call
Establishment
Success Rate
none
Immediate
Assignment
Measuremen
t per Cell
((([CA303J:Call Setup
Indications (Circuit Service)])*
{100}/([CA300J:Channel
Requests (Circuit Service)]))/
{100})*((([CA313:Successful
Assignments])*{100}/
([CA310:Assignment
Requests]))/{100})*({1}((([CM30:Call Drops on
SDCCH])*{100}/
([K3003:Successful SDCCH
Seizures]))/{100}))*{100}
OVERLOAD rate of
paging
none
Flow Control
Measuremen
t per Cell
143
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Retainabi
lity KPI
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
none
KPI
Measuremen
t per Cell
{60}*[K3014:Traffic Volume
on TCH]/[CM33:Call Drops on
Traffic Channel]*{100}
RM333:Radio Drop
Rate of TCH
Call Drop
Measuremen
t per Cell
RH333:Handover
Drop Rate of TCH
Intra-cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303B:Intra-BSC
Handover Success
Rate
Intra-cell
Handover
Measuremen
t per Cell
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
CS
Mobility
KPI
Issue 02 (2011-08-25)
144
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TH343:Success Rate
of Incoming External
Inter-Cell Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303D:Success
Rate of Incoming
External Inter-Cell
Radio Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
TH333:Success Rate
of Outgoing External
Inter-Cell Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303E:Success
Rate of External
Outgoing Cell Radio
Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
145
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (900M/
850M-1800M/
1900M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3031G:Incoming
Internal Inter-Cell Handover
Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])([RH3031F:Failed Incoming
Internal Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3033F:Failed Incoming
External Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3035F:Failed Outgoing
External Inter-Cell Handovers
(900/850/810-1800/1900)]))/
([RH3031G:Incoming Internal
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])*
{100}
146
PRS
Performance Report Reference
Subrep
ort
Name
CS
Resource
Usage
Ratio
KPI
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (1800M/
1900M-900M/
850M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3032G:Incoming
Internal Inter-Cell Handover
Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])([RH3032F:Failed Incoming
Internal Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3034F:Failed Incoming
External Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3036F:Failed Outgoing
External Inter-Cell Handovers
(1800/1900-900/850/810)]))/
([RH3032G:Incoming Internal
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])*
{100}
Traffic Volume on
TCH(V2)
none
KPI
Measuremen
t per Cell
[K3014:Traffic Volume on
TCH]
TCHH Traffic
Volume(V2)
none
KPI
Measuremen
t per Cell
[K3034:TCHH Traffic
Volume]
Traffic Volume on
SDCCH(V2)
none
KPI
Measuremen
t per Cell
[K3004:Traffic Volume on
SDCCH]
147
PRS
Performance Report Reference
Subrep
ort
Name
PS
Accessab
lity KPI
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Availability
(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
([CR3027:Mean Number of
Available Channels (TCHF)]+
[CR3028:Mean Number of
Available Channels (TCHH)])/
([CR3017:Mean Number of
Dynamically Configured
Channels (TCHF)]+
[CR3018:Mean Number of
Dynamically Configured
Channels (TCHH)])*{100}
SDCCH Availability
(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
[CR3020:Mean Number of
Available Channels
(SDCCH)]/[CR3010:Mean
Number of Dynamically
Configured Channels
(SDCCH)]*{100}
RK3255:TRX
Usability
KPI
Measuremen
t per Cell
Successful Uplink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9502:Number of Successful
Uplink Assignments]/
[A9501:Number of Uplink
Assignments]*{100}
Successful Downlink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9508:Number of Successful
Downlink Assignments]/
[A9507:Number of Downlink
Assignments]*{100}
Uplink TBF
Establishment
Success Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9002:Number of Successful
Uplink GPRS TBF
Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])/
([A9001:Number of Uplink
GPRS TBF Establishment
Attempts]+[A9201:Number of
Uplink EGPRS TBF
Establishment Attempts])*
{100}
148
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Establishment
Success Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9102:Number of Successful
Downlink GPRS TBF
Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])/
([A9101:Number of Downlink
GPRS TBF Establishment
Attempts]+[A9301:Number of
Downlink EGPRS TBF
Establishment Attempts])*
{100}
Uplink EGPRS
Establishment
Success Rate
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments]/
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts]*{100}
Downlink EGPRS
Establishment
Success Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]/
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts]*{100}
Uplink TBF
Congestion Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9003:Number of Failed
Uplink GPRS TBF
Establishments due to No
Channel]+[A9203:Number of
Failed Uplink EGPRS TBF
Establishments due to No
Channel])/([A9001:Number of
Uplink GPRS TBF
Establishment Attempts]+
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts])*{100}
149
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Congestion Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9103:Number of Failed
Downlink GPRS TBF
Establishments due to No
Channel]+[A9303:Number of
Failed Downlink EGPRS TBF
Establishments due to No
Channel])/([A9101:Number of
Downlink GPRS TBF
Establishment Attempts]+
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9203:Number of Failed
Uplink EGPRS TBF
Establishments due to No
Channel]/[A9201:Number of
Uplink EGPRS TBF
Establishment Attempts]*
{100}
Downlink EGPRS
TBF Congestion
Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9303:Number of Failed
Downlink EGPRS TBF
Establishments due to No
Channel]/[A9301:Number of
Downlink EGPRS TBF
Establishment Attempts]*
{100}
150
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
Retainabi
lity KPI
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9006:Number of Uplink
GPRS TBF Abnormal Releases
due to N3101 Overflow (MS
No Response)]+
[A9007:Number of Uplink
GPRS TBF Abnormal Releases
due to N3103 Overflow (MS
No Response)]+
[A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]+
[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/([A9002:Number
of Successful Uplink GPRS
TBF Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])*{100}
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9118:Number of Downlink
GPRS Intermit Transfers]+
[A9318:Number of Downlink
EGPRS Intermit Transfers])/
([A9102:Number of Successful
Downlink GPRS TBF
Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]+
[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/[A9202:Number
of Successful Uplink EGPRS
TBF Establishments]*{100}
151
PRS
Performance Report Reference
Subrep
ort
Name
PS
Transmis
sion
Performa
nce KPI
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink EGPRS
TBF Drop Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9318:Number of Downlink
EGPRS Intermit Transfers]/
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]*{100}
Retransmission Rate
of Uplink GPRS
RLC Data Blocks(%)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9006:Number of
Valid Uplink RLC Data Blocks
Using CS1]+[L9007:Number
of Valid Uplink RLC Data
Blocks Using CS2]+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])/
[L9001:Total Number of
Uplink GPRS RLC Data
Blocks]))*{100}
Retransmission Rate
of Downlink GPRS
RLC Data Blocks(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9106:Total Number
of Valid RLC Downlink Data
Blocks Using CS1]+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]+[L9108:Total
Number of Valid RLC
Downlink Data Blocks Using
CS3]+[L9109:Total Number of
Valid RLC Downlink Data
Block Using CS4])/
[L9101:Total Number of
Downlink GPRS RLC Data
Blocks]))*{100}
152
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Uplink EGPRS
RLC Data Blocks(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9211:Total Number
of Valid Uplink EGPRS MCS1
RLC Data Blocks]+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/[L9201:Total
Number of Uplink EGPRS
RLC Data Blocks]))*{100}
153
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Downlink EGPRS
RLC Data Blocks(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9311:Total Number
of Valid Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9312:Total Number of Valid
Downlink EGPRS MCS2 RLC
Data Blocks]+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks])/[L9301:Total
Number of Downlink EGPRS
RLC Data Blocks]))*{100}
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])/
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]+[L9007:Number
of Valid Uplink RLC Data
Blocks Using CS2]+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])*{100}
154
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
GPRS RLC Coding
Scheme with
CS3&CS4(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9108:Total Number of
Valid RLC Downlink Data
Blocks Using CS3]+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4])/([L9106:Total
Number of Valid RLC
Downlink Data Blocks Using
CS1]+[L9107:Total Number of
Valid RLC Downlink Data
Blocks Using CS2]+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]+[L9109:Total
Number of Valid RLC
Downlink Data Block Using
CS4])*{100}
155
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Uplink
EGPRS RLC Coding
Scheme with
MCS7&MCS8&MC
S9(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9217:Total Number of
Valid Uplink EGPRS MCS7
RLC Data Blocks]+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/([L9211:Total
Number of Valid Uplink
EGPRS MCS1 RLC Data
Blocks]+[L9212:Total
Number of Valid Uplink
EGPRS MCS2 RLC Data
Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])*{100}
156
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
EGPRS RLC Coding
Scheme with
MCS7&MCS8&MC
S9(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8 RLC
Data Blocks]+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks])/([L9311:Total
Number of Valid Downlink
EGPRS MCS1 RLC Data
Blocks]+[L9312:Total
Number of Valid Downlink
EGPRS MCS2 RLC Data
Blocks]+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks])*{100}
157
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink GPRS
RLC per PDCH
(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]*{20}/{1000})
Average Throughput
of Downlink GPRS
RLC per PDCH
(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9101:Total
Number of Downlink GPRS
RLC Data Blocks]*{20}/
{1000})
158
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per PDCH
(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8})/
(({1024}*([L9202:Total
Number of Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9203:Total Number of
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9204:Total
Number of Uplink EGPRS
MCS3 RLC Data Blocks]+
[L9205:Total Number of
Uplink EGPRS MCS4 RLC
Data Blocks]+[L9206:Total
Number of Uplink EGPRS
MCS5 RLC Data Blocks]+
[L9207:Total Number of
Uplink EGPRS MCS6 RLC
Data Blocks]+[L9208:Total
Number of Uplink EGPRS
MCS7 RLC Data Blocks]/{2}+
[L9209:Total Number of
Uplink EGPRS MCS8 RLC
Data Blocks]/{2}+
159
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 02 (2011-08-25)
160
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per PDCH
(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data Blocks]*
{22}+[L9312:Total Number of
Valid Downlink EGPRS
MCS2 RLC Data Blocks]*
{28}+[L9313:Total Number of
Valid Downlink EGPRS
MCS3 RLC Data Blocks]*
{37}+[L9314:Total Number of
Valid Downlink EGPRS
MCS4 RLC Data Blocks]*
{44}+[L9315:Total Number of
Valid Downlink EGPRS
MCS5 RLC Data Blocks]*
{56}+[L9316:Total Number of
Valid Downlink EGPRS
MCS6 RLC Data Blocks]*
{74}+[L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]*
{56}+[L9318:Total Number of
Valid Downlink EGPRS
MCS8 RLC Data Blocks]*
{68}+[L9319:Total Number of
Valid Downlink EGPRS
MCS9 RLC Data Blocks]*
{74})*{8})/(({1024}*
([L9302:Total Number of
Downlink EGPRS MCS1 RLC
Data Blocks]+[L9303:Total
Number of Downlink EGPRS
MCS2 RLC Data Blocks]+
[L9304:Total Number of
Downlink EGPRS MCS3 RLC
Data Blocks]+[L9305:Total
Number of Downlink EGPRS
MCS4 RLC Data Blocks]+
[L9306:Total Number of
Downlink EGPRS MCS5 RLC
Data Blocks]+[L9307:Total
Number of Downlink EGPRS
MCS6 RLC data blocks]+
[L9308:Total Number of
Downlink EGPRS MCS7 RLC
Data Blocks]/{2}+
[L9309:Total Number of
Downlink EGPRS MCS8 RLC
161
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data Blocks]/{2}+
[L9310:Total Number of
Downlink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 02 (2011-08-25)
Average Throughput
of Uplink GPRS
RLC per Cell(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9020:Total
Duration of Uplink GPRS
TBFs])
Average Throughput
of Downlink GPRS
RLC per Cell(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9121:Total
Duration of Downlink GPRS
TBFs])
162
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per Cell(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8}/
({1024}*[L9235:Total
Duration of Uplink EGPRS
TBFs])
163
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per Cell(kbps)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data Blocks]*
{22}+[L9312:Total Number of
Valid Downlink EGPRS
MCS2 RLC Data Blocks]*
{28}+[L9313:Total Number of
Valid Downlink EGPRS
MCS3 RLC Data Blocks]*
{37}+[L9314:Total Number of
Valid Downlink EGPRS
MCS4 RLC Data Blocks]*
{44}+[L9315:Total Number of
Valid Downlink EGPRS
MCS5 RLC Data Blocks]*
{56}+[L9316:Total Number of
Valid Downlink EGPRS
MCS6 RLC Data Blocks]*
{74}+[L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]*
{56}+[L9318:Total Number of
Valid Downlink EGPRS
MCS8 RLC Data Blocks]*
{68}+[L9319:Total Number of
Valid Downlink EGPRS
MCS9 RLC Data Blocks]*
{74})*{8}/({1024}*
[L9336:Total Duration of
Downlink EGPRS TBFs])
Average Throughput
of Uplink GPRS LLC
per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9422:Throughput of Uplink
GPRS Users LLC PDU]/
([L9421:Total Bytes of Uplink
GPRS Users LLC PDUs]*{8}/
{1024})
Average Throughput
of Downlink GPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9526:Throughput of
Downlink GPRS Users LLC
PDU]/([L9525:Total Bytes of
Downlink GPRS Users LLC
PDU]*{8}/{1024})
164
PRS
Performance Report Reference
Subrep
ort
Name
PS
Resource
Usage
Ratio
KPI
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
LLC per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9424:Throughput of Uplink
EGPRS Users LLC PDU]/
([L9423:Total Bytes of Uplink
EGPRS Users LLC PDUs]*
{8}/{1024})
Average Throughput
of Downlink EGPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9528:Throughput of
Downlink EGPRS Users LLC
PDU]/([L9527:Total Bytes of
Downlink EGPRS Users LLC
PDU]*{8}/{1024})
Uplink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
Downlink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
PDCH Occupation
Rate
none
PDCH
Resource
Capability
Measuremen
t
[AR9311:Average Number of
Occupied PDCHs]/
[AR9303:Average Number of
Available PDCHs]*{100}
BSC Reclaimed
Dynamic PDCH Rate
none
PDCH
Resource
Capability
Measuremen
t
[R9344:Number of Reclaimed
Busy Dynamic PDCHs]/
[R9343:Number of Reclaimed
Dynamic PDCHs]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
165
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
BSC KPI
Report
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
166
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
167
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Accessibility Report
Mobility Report
Issue 02 (2011-08-25)
168
PRS
Performance Report Reference
Retainability Report
Accessibility Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Report
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
K3100:Immediate
Assignment
Requests
times
KPI
Measuremen
t per Cell
A9503:Number of
Uplink PS Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9504:Number of
Successful Uplink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9509:Number of
Downlink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
169
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
A9510:Number of
Successful Downlink
PS Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
R3100A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (SDCCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
R3109A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (TCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
K3010A:TCH
Seizure Requests
(Traffic Channel)
times
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
K3021:Failed TCH
Seizures due to Busy
TCH (Signaling
Channel)
times
KPI
Measuremen
t per Cell
K3023:Successful
TCH Seizures
(Signaling Channel)
times
KPI
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Issue 02 (2011-08-25)
170
PRS
Performance Report Reference
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Cell
Report
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Congesti
on Cell
Report
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Issue 02 (2011-08-25)
171
PRS
Performance Report Reference
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Busy
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Idle Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
172
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
BSC KPI
Report
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
173
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
174
PRS
Performance Report Reference
Mobility Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Report
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Strength)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122B:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122A:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H311B:Number of
Outgoing Internal
Inter-Cell Handover
Commands
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
175
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
H310O:Number of
Outgoing Internal
Inter-Cell Handover
Requests (MS
Handover in the
Overlaid Subcell
Covered by the
Enhanced Dualband
Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310N:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Overlaid
to Underlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310M:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Underlaid
to Overlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310F:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Better
Cell)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310G:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Load)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310H:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Rapid
Level Drop)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
176
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
H3100Y:Number of
Outgoing Internal
Inter-Cell Handover
Requests (SDCCH)
(Excluding Directed
Retry)
(900/850/810-1800/
1900)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH370a:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BSC Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH370b:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BTS Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH312C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Timer Expired)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
177
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n Report
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
K3015:Available
TCHs
numb
er
KPI
Measuremen
t per Cell
K3005:Available
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3006:Configured
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3016:Configured
TCHs
numb
er
KPI
Measuremen
t per Cell
Assignment
Measuremen
t per Cell
A3157A:Failed
Mode Modify
Attempts (MOC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3157C:Failed
Mode Modify
Attempts (MTC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3158A:Failed
Mode Modify
Attempts (MOC)
(TCHH)
times
Assignment
Measuremen
t per Cell
A3158C:Failed
Mode Modify
Attempts (MTC)
(TCHH)
times
Assignment
Measuremen
t per Cell
S422:Number of
Attemps in
Interference Band
numb
er
Interference
Band
Measuremen
t per TRX
178
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
R3134:Failed
Queuing Attempts
due to Queue
Overflow
times
Channel
Assignment
Queue
Measuremen
t per Cell
CR313C:Failed
Queuing Attempts
times
Channel
Assignment
Queue
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3034:TCHH
Traffic Volume
Erl
KPI
Measuremen
t per Cell
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
R3550M:Traffic
Volume of Signaling
Channels (SDCCH)
Erl
Channel
State
Measuremen
t per Cell
R3550L:Traffic
Volume of Unknown
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550J:Traffic
Volume of USSD
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550I:Traffic
Volume of Short
Message Service on
SDCCH
Erl
Channel
State
Measuremen
t per Cell
179
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
R3550H:Traffic
Volume of Speech
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
Retainability Report
Null
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Report
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
RM317:Call Drop
Rate on TCHF per
cell
Call Drop
Measuremen
t per Cell
RM327:Call Drop
Rate on TCHH per
cell
Call Drop
Measuremen
t per Cell
180
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RM330:Call Drop
Rate on TCH on the
TRX in the Underlaid
Subcell
Call Drop
Measuremen
t per Cell
RM330a:Call Drop
Rate on TCH on the
TRX in the OverLaid
Subcell
Call Drop
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
ZTR104B:Call Drop
Rate on SDCCH
(Call Type)
SDCCH Call
Drop
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
181
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS
Accessab
lity KPI
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
Assignment Success
Rate
none
Assignment
Measuremen
t per Cell
[CA313:Successful
Assignments]/
[CA310:Assignment Requests]
*{100}
182
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
none
Assignment
Measuremen
t per Cell
([CA313:Successful
Assignments]([A3100K:Assignment
Requests (Signaling Channel)
(SDCCH)]+[A3100A:Assignment Requests (Signaling
Channel) (TCH)][A312S:Failed Assignments
(Signaling Channel)]+
[CA310A:Assignment
Requests (TCH Assigned
Repeatedly over A Interface)][CA312A:Failed Assignments
(TCH Assigned Repeatedly
over A Interface)]))/
([A3039J:SDCCH Seizures for
Speech Service]+
[A301F:TCHF Seizures for
Speech Service]+
[A301HH:TCHH Seizures for
Speech Service])*{100}
BSS Call
Establishment
Success Rate
none
Immediate
Assignment
Measuremen
t per Cell
((([CA303J:Call Setup
Indications (Circuit Service)])*
{100}/([CA300J:Channel
Requests (Circuit Service)]))/
{100})*((([CA313:Successful
Assignments])*{100}/
([CA310:Assignment
Requests]))/{100})*({1}((([CM30:Call Drops on
SDCCH])*{100}/
([K3003:Successful SDCCH
Seizures]))/{100}))*{100}
183
PRS
Performance Report Reference
Subrep
ort
Name
CS
Retainabi
lity KPI
CS
Mobility
KPI
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
OVERLOAD rate of
paging
none
Flow Control
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
none
KPI
Measuremen
t per Cell
{60}*[K3014:Traffic Volume
on TCH]/[CM33:Call Drops on
Traffic Channel]*{100}
RM333:Radio Drop
Rate of TCH
Call Drop
Measuremen
t per Cell
RH333:Handover
Drop Rate of TCH
Intra-cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
184
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RH303B:Intra-BSC
Handover Success
Rate
Intra-cell
Handover
Measuremen
t per Cell
RH303C:Intra-BSC
Radio Handover
Success Rate
Intra-cell
Handover
Measuremen
t per Cell
TH343:Success Rate
of Incoming External
Inter-Cell Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303D:Success
Rate of Incoming
External Inter-Cell
Radio Handovers
Incoming
External
Inter-Cell
Handover
Measuremen
t per Cell
TH333:Success Rate
of Outgoing External
Inter-Cell Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
RH303E:Success
Rate of External
Outgoing Cell Radio
Handovers
Outgoing
External
Inter-Cell
Handover
Measuremen
t per Cell
185
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (900M/
850M-1800M/
1900M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3031G:Incoming
Internal Inter-Cell Handover
Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])([RH3031F:Failed Incoming
Internal Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3033F:Failed Incoming
External Inter-Cell Handovers
(900/850/810-1800/1900)]+
[RH3035F:Failed Outgoing
External Inter-Cell Handovers
(900/850/810-1800/1900)]))/
([RH3031G:Incoming Internal
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3033G:Incoming External
Inter-Cell Handover Requests
(900/850/810-1800/1900)]+
[RH3035G:Outgoing External
Inter-Cell Handover Requests
(900/850/810-1800/1900)])*
{100}
186
PRS
Performance Report Reference
Subrep
ort
Name
CS
Resource
Usage
Ratio
KPI
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Success Rate of
Dual-Band
Handovers (1800M/
1900M-900M/
850M)(V2)
none
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
(([RH3032G:Incoming
Internal Inter-Cell Handover
Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])([RH3032F:Failed Incoming
Internal Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3034F:Failed Incoming
External Inter-Cell Handovers
(1800/1900-900/850/810)]+
[RH3036F:Failed Outgoing
External Inter-Cell Handovers
(1800/1900-900/850/810)]))/
([RH3032G:Incoming Internal
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3034G:Incoming External
Inter-Cell Handover Requests
(1800/1900-900/850/810)]+
[RH3036G:Outgoing External
Inter-Cell Handover Requests
(1800/1900-900/850/810)])*
{100}
Traffic Volume on
TCH(V2)
none
KPI
Measuremen
t per Cell
[K3014:Traffic Volume on
TCH]
TCHH Traffic
Volume(V2)
none
KPI
Measuremen
t per Cell
[K3034:TCHH Traffic
Volume]
Traffic Volume on
SDCCH(V2)
none
KPI
Measuremen
t per Cell
[K3004:Traffic Volume on
SDCCH]
187
PRS
Performance Report Reference
Subrep
ort
Name
PS
Accessab
lity KPI
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH Availability
(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
([CR3027:Mean Number of
Available Channels (TCHF)]+
[CR3028:Mean Number of
Available Channels (TCHH)])/
([CR3017:Mean Number of
Dynamically Configured
Channels (TCHF)]+
[CR3018:Mean Number of
Dynamically Configured
Channels (TCHH)])*{100}
SDCCH Availability
(V2)
none
Channel
Configuratio
n
Measuremen
t per Cell
[CR3020:Mean Number of
Available Channels
(SDCCH)]/[CR3010:Mean
Number of Dynamically
Configured Channels
(SDCCH)]*{100}
RK3255:TRX
Usability
KPI
Measuremen
t per Cell
Successful Uplink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9502:Number of Successful
Uplink Assignments]/
[A9501:Number of Uplink
Assignments]*{100}
Successful Downlink
Assignment Rate
none
Packet
Assignment
Capability
Measuremen
t
[A9508:Number of Successful
Downlink Assignments]/
[A9507:Number of Downlink
Assignments]*{100}
Uplink TBF
Establishment
Success Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9002:Number of Successful
Uplink GPRS TBF
Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])/
([A9001:Number of Uplink
GPRS TBF Establishment
Attempts]+[A9201:Number of
Uplink EGPRS TBF
Establishment Attempts])*
{100}
188
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Establishment
Success Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9102:Number of Successful
Downlink GPRS TBF
Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])/
([A9101:Number of Downlink
GPRS TBF Establishment
Attempts]+[A9301:Number of
Downlink EGPRS TBF
Establishment Attempts])*
{100}
Uplink EGPRS
Establishment
Success Rate
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments]/
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts]*{100}
Downlink EGPRS
Establishment
Success Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]/
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts]*{100}
Uplink TBF
Congestion Rate
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9003:Number of Failed
Uplink GPRS TBF
Establishments due to No
Channel]+[A9203:Number of
Failed Uplink EGPRS TBF
Establishments due to No
Channel])/([A9001:Number of
Uplink GPRS TBF
Establishment Attempts]+
[A9201:Number of Uplink
EGPRS TBF Establishment
Attempts])*{100}
189
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink TBF
Congestion Rate
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9103:Number of Failed
Downlink GPRS TBF
Establishments due to No
Channel]+[A9303:Number of
Failed Downlink EGPRS TBF
Establishments due to No
Channel])/([A9101:Number of
Downlink GPRS TBF
Establishment Attempts]+
[A9301:Number of Downlink
EGPRS TBF Establishment
Attempts])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9203:Number of Failed
Uplink EGPRS TBF
Establishments due to No
Channel]/[A9201:Number of
Uplink EGPRS TBF
Establishment Attempts]*
{100}
Downlink EGPRS
TBF Congestion
Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9303:Number of Failed
Downlink EGPRS TBF
Establishments due to No
Channel]/[A9301:Number of
Downlink EGPRS TBF
Establishment Attempts]*
{100}
190
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
Retainabi
lity KPI
none
Uplink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9006:Number of Uplink
GPRS TBF Abnormal Releases
due to N3101 Overflow (MS
No Response)]+
[A9007:Number of Uplink
GPRS TBF Abnormal Releases
due to N3103 Overflow (MS
No Response)]+
[A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]+
[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/([A9002:Number
of Successful Uplink GPRS
TBF Establishments]+
[A9202:Number of Successful
Uplink EGPRS TBF
Establishments])*{100}
none
Downlink
GPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9118:Number of Downlink
GPRS Intermit Transfers]+
[A9318:Number of Downlink
EGPRS Intermit Transfers])/
([A9102:Number of Successful
Downlink GPRS TBF
Establishments]+
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments])*{100}
none
Uplink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
([A9206:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3101
Overflow (MS No Response)]+
[A9207:Number of Uplink
EGPRS TBF Abnormal
Releases due to N3103
Overflow (MS No
Response)])/[A9202:Number
of Successful Uplink EGPRS
TBF Establishments]*{100}
191
PRS
Performance Report Reference
Subrep
ort
Name
PS
Transmis
sion
Performa
nce KPI
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink EGPRS
TBF Drop Rate
none
Downlink
EGPRS TBF
Establish and
Release
Capability
Measuremen
t
[A9318:Number of Downlink
EGPRS Intermit Transfers]/
[A9302:Number of Successful
Downlink EGPRS TBF
Establishments]*{100}
Retransmission Rate
of Uplink GPRS
RLC Data Blocks(%)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9006:Number of
Valid Uplink RLC Data Blocks
Using CS1]+[L9007:Number
of Valid Uplink RLC Data
Blocks Using CS2]+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])/
[L9001:Total Number of
Uplink GPRS RLC Data
Blocks]))*{100}
Retransmission Rate
of Downlink GPRS
RLC Data Blocks(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9106:Total Number
of Valid RLC Downlink Data
Blocks Using CS1]+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]+[L9108:Total
Number of Valid RLC
Downlink Data Blocks Using
CS3]+[L9109:Total Number of
Valid RLC Downlink Data
Block Using CS4])/
[L9101:Total Number of
Downlink GPRS RLC Data
Blocks]))*{100}
192
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Uplink EGPRS
RLC Data Blocks(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9211:Total Number
of Valid Uplink EGPRS MCS1
RLC Data Blocks]+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/[L9201:Total
Number of Uplink EGPRS
RLC Data Blocks]))*{100}
193
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Downlink EGPRS
RLC Data Blocks(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
({1}-(([L9311:Total Number
of Valid Downlink EGPRS
MCS1 RLC Data Blocks]+
[L9312:Total Number of Valid
Downlink EGPRS MCS2 RLC
Data Blocks]+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks])/[L9301:Total
Number of Downlink EGPRS
RLC Data Blocks]))*{100}
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])/
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]+[L9007:Number
of Valid Uplink RLC Data
Blocks Using CS2]+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]+[L9009:Number
of Valid Uplink RLC Data
Blocks Using CS4])*{100}
194
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
GPRS RLC Coding
Scheme with
CS3&CS4(%)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9108:Total Number of
Valid RLC Downlink Data
Blocks Using CS3]+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4])/([L9106:Total
Number of Valid RLC
Downlink Data Blocks Using
CS1]+[L9107:Total Number of
Valid RLC Downlink Data
Blocks Using CS2]+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]+[L9109:Total
Number of Valid RLC
Downlink Data Block Using
CS4])*{100}
195
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Uplink
EGPRS RLC Coding
Scheme with
MCS7&MCS8&MC
S9(%)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9217:Total Number of
Valid Uplink EGPRS MCS7
RLC Data Blocks]+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])/([L9211:Total
Number of Valid Uplink
EGPRS MCS1 RLC Data
Blocks]+[L9212:Total
Number of Valid Uplink
EGPRS MCS2 RLC Data
Blocks]+[L9213:Total
Number of Valid Uplink
EGPRS MCS3 RLC Data
Blocks]+[L9214:Total
Number of Valid Uplink
EGPRS MCS4 RLC Data
Blocks]+[L9215:Total
Number of Valid Uplink
EGPRS MCS5 RLC Data
Blocks]+[L9216:Total
Number of Valid Uplink
EGPRS MCS6 RLC Data
Blocks]+[L9217:Total
Number of Valid Uplink
EGPRS MCS7 RLC Data
Blocks]+[L9218:Total
Number of Valid Uplink
EGPRS MCS8 RLC Data
Blocks]+[L9219:Total
Number of Valid Uplink
EGPRS MCS9 RLC Data
Blocks])*{100}
196
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Rate of Downlink
EGPRS RLC Coding
Scheme with
MCS7&MCS8&MC
S9(%)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]+
[L9318:Total Number of Valid
Downlink EGPRS MCS8 RLC
Data Blocks]+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks])/([L9311:Total
Number of Valid Downlink
EGPRS MCS1 RLC Data
Blocks]+[L9312:Total
Number of Valid Downlink
EGPRS MCS2 RLC Data
Blocks]+[L9313:Total
Number of Valid Downlink
EGPRS MCS3 RLC Data
Blocks]+[L9314:Total
Number of Valid Downlink
EGPRS MCS4 RLC Data
Blocks]+[L9315:Total
Number of Valid Downlink
EGPRS MCS5 RLC Data
Blocks]+[L9316:Total
Number of Valid Downlink
EGPRS MCS6 RLC Data
Blocks]+[L9317:Total
Number of Valid Downlink
EGPRS MCS7 RLC Data
Blocks]+[L9318:Total
Number of Valid Downlink
EGPRS MCS8 RLC Data
Blocks]+[L9319:Total
Number of Valid Downlink
EGPRS MCS9 RLC Data
Blocks])*{100}
197
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink GPRS
RLC per PDCH
(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9001:Total
Number of Uplink GPRS RLC
Data Blocks]*{20}/{1000})
Average Throughput
of Downlink GPRS
RLC per PDCH
(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9101:Total
Number of Downlink GPRS
RLC Data Blocks]*{20}/
{1000})
198
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per PDCH
(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8})/
(({1024}*([L9202:Total
Number of Uplink EGPRS
MCS1 RLC Data Blocks]+
[L9203:Total Number of
Uplink EGPRS MCS2 RLC
Data Blocks]+[L9204:Total
Number of Uplink EGPRS
MCS3 RLC Data Blocks]+
[L9205:Total Number of
Uplink EGPRS MCS4 RLC
Data Blocks]+[L9206:Total
Number of Uplink EGPRS
MCS5 RLC Data Blocks]+
[L9207:Total Number of
Uplink EGPRS MCS6 RLC
Data Blocks]+[L9208:Total
Number of Uplink EGPRS
MCS7 RLC Data Blocks]/{2}+
[L9209:Total Number of
Uplink EGPRS MCS8 RLC
Data Blocks]/{2}+
199
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[L9210:Total Number of
Uplink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 02 (2011-08-25)
200
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per PDCH
(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
(([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data Blocks]*
{22}+[L9312:Total Number of
Valid Downlink EGPRS
MCS2 RLC Data Blocks]*
{28}+[L9313:Total Number of
Valid Downlink EGPRS
MCS3 RLC Data Blocks]*
{37}+[L9314:Total Number of
Valid Downlink EGPRS
MCS4 RLC Data Blocks]*
{44}+[L9315:Total Number of
Valid Downlink EGPRS
MCS5 RLC Data Blocks]*
{56}+[L9316:Total Number of
Valid Downlink EGPRS
MCS6 RLC Data Blocks]*
{74}+[L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]*
{56}+[L9318:Total Number of
Valid Downlink EGPRS
MCS8 RLC Data Blocks]*
{68}+[L9319:Total Number of
Valid Downlink EGPRS
MCS9 RLC Data Blocks]*
{74})*{8})/(({1024}*
([L9302:Total Number of
Downlink EGPRS MCS1 RLC
Data Blocks]+[L9303:Total
Number of Downlink EGPRS
MCS2 RLC Data Blocks]+
[L9304:Total Number of
Downlink EGPRS MCS3 RLC
Data Blocks]+[L9305:Total
Number of Downlink EGPRS
MCS4 RLC Data Blocks]+
[L9306:Total Number of
Downlink EGPRS MCS5 RLC
Data Blocks]+[L9307:Total
Number of Downlink EGPRS
MCS6 RLC data blocks]+
[L9308:Total Number of
Downlink EGPRS MCS7 RLC
Data Blocks]/{2}+
[L9309:Total Number of
Downlink EGPRS MCS8 RLC
201
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data Blocks]/{2}+
[L9310:Total Number of
Downlink EGPRS MCS9 RLC
Data Blocks]/{2})*{20}/
{1000}))
Issue 02 (2011-08-25)
Average Throughput
of Uplink GPRS
RLC per Cell(kbps)
none
Uplink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9006:Number of Valid
Uplink RLC Data Blocks
Using CS1]*{23}+
[L9007:Number of Valid
Uplink RLC Data Blocks
Using CS2]*{34}+
[L9008:Number of Valid
Uplink RLC Data Blocks
Using CS3]*{40}+
[L9009:Number of Valid
Uplink RLC Data Blocks
Using CS4]*{54})*{8}/
({1024}*[L9020:Total
Duration of Uplink GPRS
TBFs])
Average Throughput
of Downlink GPRS
RLC per Cell(kbps)
none
Downlink
GPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9106:Total Number of
Valid RLC Downlink Data
Blocks Using CS1]*{23}+
[L9107:Total Number of Valid
RLC Downlink Data Blocks
Using CS2]*{34}+
[L9108:Total Number of Valid
RLC Downlink Data Blocks
Using CS3]*{40}+
[L9109:Total Number of Valid
RLC Downlink Data Block
Using CS4]*{54})*{8}/
({1024}*[L9121:Total
Duration of Downlink GPRS
TBFs])
202
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
RLC per Cell(kbps)
none
Uplink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9211:Total Number of
Valid Uplink EGPRS MCS1
RLC Data Blocks]*{22}+
[L9212:Total Number of Valid
Uplink EGPRS MCS2 RLC
Data Blocks]*{28}+
[L9213:Total Number of Valid
Uplink EGPRS MCS3 RLC
Data Blocks]*{37}+
[L9214:Total Number of Valid
Uplink EGPRS MCS4 RLC
Data Blocks]*{44}+
[L9215:Total Number of Valid
Uplink EGPRS MCS5 RLC
Data Blocks]*{56}+
[L9216:Total Number of Valid
Uplink EGPRS MCS6 RLC
Data Blocks]*{74}+
[L9217:Total Number of Valid
Uplink EGPRS MCS7 RLC
Data Blocks]*{56}+
[L9218:Total Number of Valid
Uplink EGPRS MCS8 RLC
Data Blocks]*{68}+
[L9219:Total Number of Valid
Uplink EGPRS MCS9 RLC
Data Blocks]*{74})*{8}/
({1024}*[L9235:Total
Duration of Uplink EGPRS
TBFs])
203
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Downlink EGPRS
RLC per Cell(kbps)
none
Downlink
EGPRS RLC
Data
Transfer
Capability
Measuremen
t
([L9311:Total Number of
Valid Downlink EGPRS
MCS1 RLC Data Blocks]*
{22}+[L9312:Total Number of
Valid Downlink EGPRS
MCS2 RLC Data Blocks]*
{28}+[L9313:Total Number of
Valid Downlink EGPRS
MCS3 RLC Data Blocks]*
{37}+[L9314:Total Number of
Valid Downlink EGPRS
MCS4 RLC Data Blocks]*
{44}+[L9315:Total Number of
Valid Downlink EGPRS
MCS5 RLC Data Blocks]*
{56}+[L9316:Total Number of
Valid Downlink EGPRS
MCS6 RLC Data Blocks]*
{74}+[L9317:Total Number of
Valid Downlink EGPRS
MCS7 RLC Data Blocks]*
{56}+[L9318:Total Number of
Valid Downlink EGPRS
MCS8 RLC Data Blocks]*
{68}+[L9319:Total Number of
Valid Downlink EGPRS
MCS9 RLC Data Blocks]*
{74})*{8}/({1024}*
[L9336:Total Duration of
Downlink EGPRS TBFs])
Average Throughput
of Uplink GPRS LLC
per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9422:Throughput of Uplink
GPRS Users LLC PDU]/
([L9421:Total Bytes of Uplink
GPRS Users LLC PDUs]*{8}/
{1024})
Average Throughput
of Downlink GPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9526:Throughput of
Downlink GPRS Users LLC
PDU]/([L9525:Total Bytes of
Downlink GPRS Users LLC
PDU]*{8}/{1024})
204
PRS
Performance Report Reference
Subrep
ort
Name
PS
Resource
Usage
Ratio
KPI
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Throughput
of Uplink EGPRS
LLC per User(kbps)
none
Uplink LLC
Data
Transfer
Capability
Measuremen
t
[L9424:Throughput of Uplink
EGPRS Users LLC PDU]/
([L9423:Total Bytes of Uplink
EGPRS Users LLC PDUs]*
{8}/{1024})
Average Throughput
of Downlink EGPRS
LLC per User(kbps)
none
Downlink
LLC Data
Transfer
Capability
Measuremen
t
[L9528:Throughput of
Downlink EGPRS Users LLC
PDU]/([L9527:Total Bytes of
Downlink EGPRS Users LLC
PDU]*{8}/{1024})
Uplink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
Downlink PDTCH/
PACCH Utilization
Rate
none
Cell Radio
Channel
Capability
Measuremen
t
PDCH Occupation
Rate
none
PDCH
Resource
Capability
Measuremen
t
[AR9311:Average Number of
Occupied PDCHs]/
[AR9303:Average Number of
Available PDCHs]*{100}
BSC Reclaimed
Dynamic PDCH Rate
none
PDCH
Resource
Capability
Measuremen
t
[R9344:Number of Reclaimed
Busy Dynamic PDCHs]/
[R9343:Number of Reclaimed
Dynamic PDCHs]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
205
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Whole
Network
KPI
Report
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
206
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
207
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
208
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GSM
BSC KPI
Report
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
209
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
210
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Report
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
RM317:Call Drop
Rate on TCHF per
cell
Call Drop
Measuremen
t per Cell
RM327:Call Drop
Rate on TCHH per
cell
Call Drop
Measuremen
t per Cell
211
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RM330:Call Drop
Rate on TCH on the
TRX in the Underlaid
Subcell
Call Drop
Measuremen
t per Cell
RM330a:Call Drop
Rate on TCH on the
TRX in the OverLaid
Subcell
Call Drop
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
ZTR104B:Call Drop
Rate on SDCCH
(Call Type)
SDCCH Call
Drop
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
212
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Busy
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Extra
Idle Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
213
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Cell
Report
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
214
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Report
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
K3100:Immediate
Assignment
Requests
times
KPI
Measuremen
t per Cell
A9503:Number of
Uplink PS Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9504:Number of
Successful Uplink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9509:Number of
Downlink PS
Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
A9510:Number of
Successful Downlink
PS Immediate
Assignments
times
Packet
Assignment
Capability
Measuremen
t
215
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
R3100A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (SDCCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
R3109A:Channel
Assignment
Requests in
Immediate
Assignment
Procedure (TCH)
times
Channel
Assignment
Request
Measuremen
t per Cell
K3010A:TCH
Seizure Requests
(Traffic Channel)
times
KPI
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
K3021:Failed TCH
Seizures due to Busy
TCH (Signaling
Channel)
times
KPI
Measuremen
t per Cell
K3023:Successful
TCH Seizures
(Signaling Channel)
times
KPI
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
216
PRS
Performance Report Reference
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Whole
Network
KPI
Report
Assignment
Measuremen
t per Cell
K3043:TCH Seizure
Success Rate
KPI
Measuremen
t per Cell
RA303G:Success
Rate of Immediate
Assignments
Immediate
Assignment
Measuremen
t per Cell
RA301G:Success
Rate of Random
Access
Immediate
Assignment
Measuremen
t per Cell
TH323:Success Rate
of Incoming Internal
Inter-Cell Handovers
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
217
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RH303A:Success
Rate of Radio
Handover
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
TH303:Success Rate
of Internal Intra-Cell
Handover
Intra-cell
Handover
Measuremen
t per Cell
ZTR104C:Call Drop
Rate on SDCCH
Call Drop
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
RR370:Congestion
Rate on SDCCH per
CELL (due to Busy)
Channel
Assignment
Failure
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
218
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
RR300:SDCCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
ZTR308:Traffic Call
Drop Ratio per cell
none
Channel
State
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
219
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Report
RH303:Handover
Success Rate
Incoming
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Strength)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122B:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3122A:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Uplink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H311B:Number of
Outgoing Internal
Inter-Cell Handover
Commands
(Downlink Quality)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310O:Number of
Outgoing Internal
Inter-Cell Handover
Requests (MS
Handover in the
Overlaid Subcell
Covered by the
Enhanced Dualband
Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
220
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
H310N:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Overlaid
to Underlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310M:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Underlaid
to Overlaid Subcell
in Enhanced
Dualband Network)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310F:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Better
Cell)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310G:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Load)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H310H:Number of
Outgoing Internal
Inter-Cell Handover
Requests (Rapid
Level Drop)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
H3100Y:Number of
Outgoing Internal
Inter-Cell Handover
Requests (SDCCH)
(Excluding Directed
Retry)
(900/850/810-1800/
1900)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
221
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CH370a:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BSC Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH370b:Number of
Successful Outgoing
Internal Inter-Cell
Handovers During
BTS Local Switch
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
CH312C:Number of
Unsuccessful
Outgoing Internal
Inter-Cell Handovers
(Timer Expired)
times
Outgoing
Internal
Inter-Cell
Handover
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Issue 02 (2011-08-25)
222
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Congesti
on Cell
Report
K3045:Congestion
Rate on TCH (All
Channels Busy)
KPI
Measuremen
t per Cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n Report
RR307:TCH
Availability
Channel
Configuratio
n
Measuremen
t per Cell
K3015:Available
TCHs
numb
er
KPI
Measuremen
t per Cell
223
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
K3005:Available
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3006:Configured
SDCCHs
numb
er
KPI
Measuremen
t per Cell
K3016:Configured
TCHs
numb
er
KPI
Measuremen
t per Cell
Assignment
Measuremen
t per Cell
A3157A:Failed
Mode Modify
Attempts (MOC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3157C:Failed
Mode Modify
Attempts (MTC)
(TCHF)
times
Assignment
Measuremen
t per Cell
A3158A:Failed
Mode Modify
Attempts (MOC)
(TCHH)
times
Assignment
Measuremen
t per Cell
A3158C:Failed
Mode Modify
Attempts (MTC)
(TCHH)
times
Assignment
Measuremen
t per Cell
S422:Number of
Attemps in
Interference Band
numb
er
Interference
Band
Measuremen
t per TRX
R3134:Failed
Queuing Attempts
due to Queue
Overflow
times
Channel
Assignment
Queue
Measuremen
t per Cell
224
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
CR313C:Failed
Queuing Attempts
times
Channel
Assignment
Queue
Measuremen
t per Cell
K3004:Traffic
Volume on SDCCH
Erl
KPI
Measuremen
t per Cell
K3014:Traffic
Volume on TCH
Erl
KPI
Measuremen
t per Cell
K3034:TCHH
Traffic Volume
Erl
KPI
Measuremen
t per Cell
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
R3550M:Traffic
Volume of Signaling
Channels (SDCCH)
Erl
Channel
State
Measuremen
t per Cell
R3550L:Traffic
Volume of Unknown
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550J:Traffic
Volume of USSD
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550I:Traffic
Volume of Short
Message Service on
SDCCH
Erl
Channel
State
Measuremen
t per Cell
R3550H:Traffic
Volume of Speech
Service on SDCCH
Erl
Channel
State
Measuremen
t per Cell
225
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6900GSM, BSC6000
Object Type
GCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
Report
R3550N:Traffic
Volume of Signaling
Channels (TCH)
Erl
Channel
State
Measuremen
t per Cell
ZTR304:Call Drop
Rate on TCH per cell
(including
Handover)
Call Drop
Measuremen
t per Cell
ZTR304A:Call Drop
Rate on TCH per cell
(Excluding
Handover)
Call Drop
Measuremen
t per Cell
K3041:TCH
Congestion Rate
(Overflow)
KPI
Measuremen
t per Cell
226
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6000(GSMR)
Object Type
GBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS
Traffic
and
Energy
Consump
tion
Report
Energy Consumption
(kwh)
none
Site Power
Consumption
Measuremen
t (for Site)
[CR2791:BTS Power
Consumption by Adding Static
Power Consumption]
CS Traffic(Erl)
none
KPI
Measuremen
t per Cell
[K3014:Traffic Volume on
TCH]+[K3004:Traffic
Volume on SDCCH]
PS Traffic(kbit)
none
Downlink
LLC Data
Transfer
Capabilty
Measuremen
t
[L9503:Total Bytes of
Downlink LLC PDUs
Received]*{8}/{1000}
227
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total Traffic(kbit)
none
KPI
Measuremen
t per Cell
([K3034:TCHH Traffic
Volume]*{11.4}*{GP}*{60}
+([K3014:Traffic Volume on
TCH]-[K3034:TCHH Traffic
Volume]-[AR3551C:Traffic
Volume on AMR TCHFs][AR3552C:Traffic Volume on
AMR TCHHs])*{22.8}*{GP}
*{60}+[AR3551C:Traffic
Volume on AMR TCHFs]*
{22.8}*{GP}*{60}+
[AR3552C:Traffic Volume on
AMR TCHHs]*{22.8}*{GP}*
{60})*{0.7}+[K3004:Traffic
Volume on SDCCH]*{22.8}*
{GP}*{60}+[L9503:Total
Bytes of Downlink LLC PDUs
Received]*{8}/{1000}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BSC6000(GSMR)
Object Type
GBSC
Issue 02 (2011-08-25)
228
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Energy
Efficienc
y
Indicator
Report
EE(bit/joule)
none
KPI
Measuremen
t per Cell
(([K3034:TCHH Traffic
Volume]*{11.4}*{GP}*{60}
+([K3014:Traffic Volume on
TCH]-[K3034:TCHH Traffic
Volume]-[AR3551C:Traffic
Volume on AMR TCHFs][AR3552C:Traffic Volume on
AMR TCHHs])*{22.8}*{GP}
*{60}+[AR3551C:Traffic
Volume on AMR TCHFs]*
{22.8}*{GP}*{60}+
[AR3552C:Traffic Volume on
AMR TCHHs]*{22.8}*{GP}*
{60})*{0.7}+[K3004:Traffic
Volume on SDCCH]*{22.8}*
{GP}*{60}+[L9503:Total
Bytes of Downlink LLC PDUs
Received]*{8}/{1000})/
[CR2791:BTS Power
Consumption by Adding Static
Power Consumption]/{3600}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
229
PRS
Performance Report Reference
Issue 02 (2011-08-25)
230
PRS
Performance Report Reference
NE Type
BSC6900GU
Object Type
BSC6900GU
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GU
Interoper
ability
GSM Voice
Outgoing Inter-RAT
Inter-Cell Handover
Preparation Success
Rate
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH351:Outgoing Inter-RAT
Inter-Cell Handover
Commands]/
[CH350:Outgoing Inter-RAT
Inter-Cell Handover Requests]
GSM Voice
Outgoing Inter-RAT
Inter-Cell Handover
Success Rate
none
Outgoing
Inter-RAT
Inter-Cell
Handover
Measuremen
t per Cell
[CH353:Successful Outgoing
Inter-RAT Inter-Cell
Handovers]/[CH351:Outgoing
Inter-RAT Inter-Cell Handover
Commands]
UMTS CS Outgoing
Inter-RAT Handover
Preparation Success
Rate
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccRelocPrepOutCS]/[IRATHO.AttRelocPrepOutCS]
UMTS CS Outgoing
Inter-RAT Handover
Success Rate
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]
UMTS PS Outgoing
Inter-RAT Handover
Success Rate
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutPSUTRAN]/[IRATHO.AttOutPSUTRAN]
231
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
232
PRS
Performance Report Reference
Issue 02 (2011-08-25)
233
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BS
performa
nce test
times
BS
performance
test
times
BS
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
234
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
idle
mode
performa
nce test
times
idle mode
performance
test
Times of Successful
MS-Initiated Entry to
Idle Mode
times
idle mode
performance
test
times
idle mode
performance
test
Times of Successful
BS-Initiated Entry to
Idle Mode
times
idle mode
performance
test
times
idle mode
performance
test
BS receive paging
response times
times
idle mode
performance
test
Times of Normal
Location Update
times
idle mode
performance
test
Times of Location
Update in Power-off
Mode
times
idle mode
performance
test
Times of Successful
Location Update
times
idle mode
performance
test
Times of Network
Re-Entry from Idle
Mode
times
idle mode
performance
test
235
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Times of Successful
Network Re-Entry
from Idle Mode
times
idle mode
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
link
quality
performa
nce test
Number of DL
Unicast SDUs on
Carrier
numb
er
link quality
performance
test
DL Unicast Traffic
on Carrier
byte
link quality
performance
test
Number of UL
Unicast PDUs on
Carrier
numb
er
link quality
performance
test
236
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
UL Unicast Traffic
on Carrier
byte
link quality
performance
test
Total UL Bandwidth
Allocated
byte
link quality
performance
test
Number of DL
Discarded PDUs on
Carrier
numb
er
link quality
performance
test
Number of UL
Discarded Packets on
Carrier
numb
er
link quality
performance
test
Number of
Retransmitted Bytes
Required by BS
(ARQ Enabled)
byte
link quality
performance
test
Number of
Retransmitted Bytes
Required by MS
(ARQ Enabled)
byte
link quality
performance
test
Number of DL
Broadcast Packets
numb
er
link quality
performance
test
DL Broadcast Traffic
byte
link quality
performance
test
Total Number of
HARQ
Retransmission
Times
times
link quality
performance
test
Total Number of
HARQ Transmission
Times
times
link quality
performance
test
237
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
handover
performa
nce test
times
handover
performance
test
Times of Successful
Handover Responses
from BS
times
handover
performance
test
Times of Handover
Execution Triggered
by MS
times
handover
performance
test
times
handover
performance
test
Times of Handover
Cancellation
Initiated by MS
times
handover
performance
test
Number of Incoming
Handover Requests
times
handover
performance
test
238
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Times of
Successfully
Responding to
Incoming Handover
times
handover
performance
test
Times of Ready
Incoming Handover
Execution
times
handover
performance
test
Number of Ready
Incoming Handover
Ranging Requests
times
handover
performance
test
Number of Unready
Incoming Handover
Ranging Requests
times
handover
performance
test
Times of
Successfully
Responding to
Incoming Handover
Ranging
times
handover
performance
test
Times of Completing
Incoming Handover
times
handover
performance
test
Number of Incoming
Handover Context
Requests
times
handover
performance
test
Number of
Successful Context
Requests for
Incoming Handover
times
handover
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
239
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
network
entry
performa
nce test
Times of Receiving
Initial Ranging
CDMA Code by BS
times
network
entry
performance
test
Times of Receiving
Periodic Ranging
CDMA Code by BS
times
network
entry
performance
test
Times of Receiving
Handover Ranging
CDMA Code by BS
times
network
entry
performance
test
Times of Responding
to Ranging CDMA
Code with Success
times
network
entry
performance
test
Times of Responding
to Ranging CDMA
Code with Continue
times
network
entry
performance
test
times
network
entry
performance
test
Number of Initial
Network Entry
Requests
times
network
entry
performance
test
240
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Initial
Ranging Times
times
network
entry
performance
test
Number of Basic
Capability
Negotiation
Requests
times
network
entry
performance
test
Times of Successful
Basic Capability
Negotiation by GW
times
network
entry
performance
test
Times of Successful
Basic Capability
Negotiation
times
network
entry
performance
test
Number of
Registration
Requests from MS
times
network
entry
performance
test
Times of Successful
Registration by GW
times
network
entry
performance
test
Times of Successful
Registration for
Initial Network Entry
times
network
entry
performance
test
Number of Service
Flow Establishment
Requests
times
network
entry
performance
test
Times of Successful
Service Flow
Establishment
times
network
entry
performance
test
times
network
entry
performance
test
241
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Times of MS
Authorization in
Initial Network Entry
times
network
entry
performance
test
Times of Successful
MS Authorization in
Initial Network Entry
times
network
entry
performance
test
times
network
entry
performance
test
Times of Successful
MS-Initiated ReAuthorization
times
network
entry
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BWA
Object Type
BWA Carrier
Issue 02 (2011-08-25)
242
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
network
detach
performa
nce test
Times of
Deregistration due to
Air Link Failure
times
network
detach
performance
test
Times of
Deregistration
Initiated by MS
times
network
detach
performance
test
Times of
Deregistration
Initiated by GW
times
network
detach
performance
test
Times of
Deregistration due to
OM
times
network
detach
performance
test
Times of
Deregistration due to
Handover Failure
times
network
detach
performance
test
Times of
Deregistration due to
Other Causes
times
network
detach
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
243
PRS
Performance Report Reference
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
throughp
ut
performa
nce test
uplink UGS
throughput
byte
throughput
performance
test
uplink ERTPS
throughput
byte
throughput
performance
test
uplink RTPS
throughput
byte
throughput
performance
test
uplink NRTPS
throughput
byte
throughput
performance
test
uplink BE
throughput
byte
throughput
performance
test
downlink UGS
throughput
byte
throughput
performance
test
downlink ERTPS
throughput
byte
throughput
performance
test
downlink RTPS
throughput
byte
throughput
performance
test
downlink NRTPS
throughput
byte
throughput
performance
test
downlink BE
throughput
byte
throughput
performance
test
244
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
BWA
Object Type
BWA Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
carrier
load
performa
nce test
Maximum Number
of Online Users
numb
er
carrier load
performance
test
Minimum Number of
Online Users
numb
er
carrier load
performance
test
Number of Slots
Occupied by UL
Common Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Broadcast Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by UL
Basic Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Basic Channel
numb
er
carrier load
performance
test
245
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Slots
Occupied by UL
Primary Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Primary Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by DL
Traffic Channel
numb
er
carrier load
performance
test
Number of Slots
Occupied by UL
Traffic Channel
numb
er
carrier load
performance
test
Total Length of UL
SDUs on MAC Layer
byte
carrier load
performance
test
Total Length of UL
PDUs on MAC Layer
byte
carrier load
performance
test
Total Length of DL
SDUs on MAC Layer
byte
carrier load
performance
test
Total Length of DL
PDUs on MAC Layer
byte
carrier load
performance
test
Number of DL Slots
Occupied on Carrier
numb
er
carrier load
performance
test
Number of UL Slots
Occupied on Carrier
numb
er
carrier load
performance
test
Total Number of
Slots Occupied on
UL Partial Zone
numb
er
carrier load
performance
test
Total Number of
Slots Occupied on
DL Partial Zone
numb
er
carrier load
performance
test
Total Number of
Slots Occupied on
UL All Zone
numb
er
carrier load
performance
test
246
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total Number of
Slots Occupied on
DL All Zone
numb
er
carrier load
performance
test
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
247
PRS
Performance Report Reference
Issue 02 (2011-08-25)
248
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Overvie
w of BSC
Performa
nce
CS Call Setup
Success Ratio
CS Call
Setup
Performance
Stat
PS Call Setup
Success Ratio
PS Call Setup
Performance
Stat
249
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call Drop
Performance
Stat
TCH Congestion
Ratio
TCH
Congestion
Performance
Stat
IntraBS Soft HO
Success Ratio
Intra-BSC
Soft HO
Performance
Stat
InterBS Soft HO
Success Ratio
Inter-BSC
Soft HO
Performance
Stat
BSC Traffic
Performance
Stat(FCH)
250
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Density of Traffic
Carried on TCH
(Excluding HO) (CSFCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO) (PSFCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Erl
BSC Traffic
Performance
Stat(Forward
SCH)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
251
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
Soft HO
Failure
Analyse
Failure Times
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (MS
rejected)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (A3 link
setup failed)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Other
causes)[Times]
times
Inter-BSC
Soft HO
Performance
Stat
InterBS Soft HO
Success Ratio
Inter-BSC
Soft HO
Performance
Stat
252
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
Soft HO
Failure
Analyse
Failure Times
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
253
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (MS
rejected)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Intra-BSC
Soft HO
Performance
Stat
IntraBS Soft HO
Success Ratio
Intra-BSC
Soft HO
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
254
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
CS Call
Drop
Reason
Analyse
times
times
times
times
times
times
times
CS IS-2000 Call
Drops (HHO fail)
[Times]
times
Formula
255
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
256
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Setup
Failure
Reason
Analyse
CS Attempts[Times]
times
CS Call
Setup
Performance
Stat
times
CS Call
Setup
Performance
Stat
CS A1 Interface
Failures[Times]
times
CS Call
Setup
Performance
Stat
CS Call Resource
Allocation Failures
[Times]
times
CS Call
Setup
Performance
Stat
CS Reverse TCH
Preamble
Acquisition Failures
[Times]
times
CS Call
Setup
Performance
Stat
times
CS Call
Setup
Performance
Stat
CS Service Connect
Failures[Times]
times
CS Call
Setup
Performance
Stat
CS Call Setup
Success Ratio
CS Call
Setup
Performance
Stat
257
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Drop
Reason
Analyse
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
258
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
times
PS Call Drop
Performance
Stat
PS Call Drop
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
259
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Setup
Failure
Reason
Analyse
PS Attempts[Times]
times
PS Call Setup
Performance
Stat
times
PS Call Setup
Performance
Stat
PS A1 Interface
Failures[Times]
times
PS Call Setup
Performance
Stat
PS Call Resource
Allocation Failures
[Times]
times
PS Call Setup
Performance
Stat
PS Reverse TCH
Preamble
Acquisition Failures
[Times]
times
PS Call Setup
Performance
Stat
times
PS Call Setup
Performance
Stat
PS Service Connect
Failures[Times]
times
PS Call Setup
Performance
Stat
260
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call Setup
Success Ratio
PS Call Setup
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SPU
Load
Report
Density of Traffic
Carried on TCH
(Excluding HO) (CSFCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO) (PSFCH)[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
261
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Erl
BSC Traffic
Performance
Stat(Forward
SCH)
Erl
BSC Traffic
Performance
Stat(FCH)
Erl
BSC Traffic
Performance
Stat(FCH)
WALSH Traffic
Density-FCH[Erl]
Erl
BSC Traffic
Performance
Stat(FCH)
Total Traffic
Erl
BSC Traffic
Performance
Stat(FCH)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
262
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Congesti
on
Reason
Analyse
TCH Congestion
Times
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (WALSH
shortage)[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Low
forward power)
[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Low
reverse power)
[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Channel
shortage)[Times]
times
TCH
Congestion
Performance
Stat
TCH Assignment
Failures (Other
causes)[Times]
times
TCH
Congestion
Performance
Stat
TCH Congestion
Ratio
TCH
Congestion
Performance
Stat
263
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSCVG3Pilot
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PCH
Channel
Usage
Ratio
TOPN
Report
none
PCH Using
Ratio
Performance
Stat
none
PCH Using
Ratio
Performance
Stat
PCH Overhead
Message Using Ratio
[%]
none
PCH Using
Ratio
Performance
Stat
none
PCH Using
Ratio
Performance
Stat
264
PRS
Performance Report Reference
Subrep
ort
Name
ACH
Channel
Usage
Ratio
TOPN
Report
Counter
Coun
ter
Unit
Function
Subset
Formula
PCH Non-call
Message Using Ratio
[%]
none
PCH Using
Ratio
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
ACH Average
Collision Ratio[%]
none
ACH
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
265
PRS
Performance Report Reference
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
Soft HO
Failure
TopN
Failure Times
times
Performance
Stat of
Carrier InterBSC Soft HO
InterBS Soft HO
Success Ratio
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (A3 link
setup failed)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
266
PRS
Performance Report Reference
Subrep
ort
Name
Inter-BS
Soft HO
Success
Ratio(%)
TopN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Failure Times
times
Performance
Stat of
Carrier InterBSC Soft HO
InterBS Soft HO
Success Ratio
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
Inter-BS Soft HO
Failures (A3 link
setup failed)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
267
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterBSC Soft HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
Soft HO
Failure
TopN
Failure Times
times
Performance
Stat of
Carrier Soft
HO
268
PRS
Performance Report Reference
Subrep
ort
Name
Intra-BS
Soft HO
Success
Ratio(%)
TopN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
IntraBS Soft HO
Success Ratio
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier Soft
HO
Failure Times
times
Performance
Stat of
Carrier Soft
HO
IntraBS Soft HO
Success Ratio
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
269
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (MS
rejected)[Times]
times
Performance
Stat of
Carrier Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
270
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Times
TopN
CS Call Drops
(Times)
times
Performance
Stat of
Carrier CS
Call Drop
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
271
PRS
Performance Report Reference
Subrep
ort
Name
CS Call
Drop
Ratio(%)
TopN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier CS
Call Drop
CS IS-2000 Call
Drops (HHO fail)
[Times]
times
Performance
Stat of
Carrier CS
Call Drop
CS Call Drops
(Times)
times
Performance
Stat of
Carrier CS
Call Drop
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
272
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier CS
Call Drop
CS IS-2000 Call
Drops (HHO fail)
[Times]
times
Performance
Stat of
Carrier CS
Call Drop
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
273
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Setup
Failure
Times
TopN
CS Attempts[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier CS
Call Setup
CS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Resource
Allocation Failures
[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Reverse TCH
Preamble
Acquisition Failures
[Times]
times
Performance
Stat of
Carrier CS
Call Setup
times
Performance
Stat of
Carrier CS
Call Setup
CS Service Connect
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Setup
Success Ratio
Performance
Stat of
Carrier CS
Call Setup
CS Attempts[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call
Setup
Success
Issue 02 (2011-08-25)
274
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Ratio(%)
TopN
CS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier CS
Call Setup
CS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Resource
Allocation Failures
[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Reverse TCH
Preamble
Acquisition Failures
[Times]
times
Performance
Stat of
Carrier CS
Call Setup
times
Performance
Stat of
Carrier CS
Call Setup
CS Service Connect
Failures[Times]
times
Performance
Stat of
Carrier CS
Call Setup
CS Call Setup
Success Ratio
Performance
Stat of
Carrier CS
Call Setup
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
275
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Drop
Times
TopN
PS Call Drops
(Times)
times
Performance
Stat of
Carrier PS
Call Drop
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
276
PRS
Performance Report Reference
Subrep
ort
Name
PS Call
Drop
Ratio(%)
TopN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
PS Call Drops
(Times)
times
Performance
Stat of
Carrier PS
Call Drop
277
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Performance
Stat of
Carrier CS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
times
Performance
Stat of
Carrier PS
Call Drop
278
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Setup
Failure
Times
TopN
PS Attempts[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Setup
Success Ratio
Performance
Stat of
Carrier PS
Call Setup
PS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
279
PRS
Performance Report Reference
Subrep
ort
Name
PS Call
Setup
Success
Ratio(%)
TopN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call Resource
Allocation Failures
[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Reverse TCH
Preamble
Acquisition Failures
[Times]
times
Performance
Stat of
Carrier PS
Call Setup
times
Performance
Stat of
Carrier PS
Call Setup
PS TCH Signaling
Exchange Failures
[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Attempts[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Setup
Failures(Times)
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Setup
Success Ratio
Performance
Stat of
Carrier PS
Call Setup
PS A1 Interface
Failures[Times]
times
Performance
Stat of
Carrier PS
Call Setup
PS Call Resource
Allocation Failures
[Times]
times
Performance
Stat of
Carrier PS
Call Setup
280
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Reverse TCH
Preamble
Acquisition Failures
[Times]
times
Performance
Stat of
Carrier PS
Call Setup
times
Performance
Stat of
Carrier PS
Call Setup
PS TCH Signaling
Exchange Failures
[Times]
times
Performance
Stat of
Carrier PS
Call Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSCVG3Pilot
Issue 02 (2011-08-25)
281
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RSSI
Performa
nce
Report
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Difference Between
Main And Diversity
RSSI Average Value
none
RSSI
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
282
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Highest
Traffic
Total Traffic
Erl
Carrier
Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO) (CSFCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO) (PSFCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(Forward
SCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
WALSH Traffic
Density-FCH[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Total Traffic
Erl
Carrier
Traffic
Performance
Stat(FCH)
Lowest
Traffic
Issue 02 (2011-08-25)
283
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Density of Traffic
Carried on TCH
(Excluding HO) (CSFCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Density of Traffic
Carried on TCH
(Excluding HO) (PSFCH)[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(Forward
SCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Erl
Carrier
Traffic
Performance
Stat(FCH)
WALSH Traffic
Density-FCH[Erl]
Erl
Carrier
Traffic
Performance
Stat(FCH)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
284
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Congesti
on Times
TopN
TCH Congestion
Times
times
Performance
Stat of
Carrier TCH
Congestion
TCH Congestion
Ratio
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (WALSH
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Low
forward power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Low
reverse power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Channel
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
285
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
TCH
Congesti
on Ratio
(%)
TopN
TCH Congestion
Times
times
Performance
Stat of
Carrier TCH
Congestion
TCH Congestion
Ratio
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (WALSH
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Low
forward power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Low
reverse power)
[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Channel
shortage)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
TCH Assignment
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier TCH
Congestion
286
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Transmit
Power of
Carrier
TOPN
Report
Average Transmit
Power of Carrier
[dBm]
dBm
Performance
Stat of Link
Information
Measuremen
t
dBm
Performance
Stat of Link
Information
Measuremen
t
dBm
Performance
Stat of Link
Information
Measuremen
t
287
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
KPI
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
ms
Performance
Stat of BSC
HRPD
Sessions
288
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Average Duration of
HRPD Session Setup
(DO B)
[Millisecond]
ms
Performance
Stat of BSC
HRPD
Sessions
Maximum Number
of Active HRPD
Sessions (DO B)
[Entries]
entrie
s
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
289
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Session
Number
and
Active
Ratio
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum Number
of Active HRPD
Sessions (DO B)
[Entries]
entrie
s
Performance
Stat of BSC
HRPD
Sessions
Subscribe Active
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
290
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Session
Setup
Success
Ratio
times
Performance
Stat of BSC
HRPD
Sessions
Performance
Stat of BSC
HRPD
Sessions
ms
Performance
Stat of BSC
HRPD
Sessions
Average Duration of
HRPD Session Setup
(DO B)
[Millisecond]
ms
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID Request
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD
Session
Setup
Failure
Issue 02 (2011-08-25)
291
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
attemp Failures(No
UATIAssignment
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Setup
SuccR
BottomN
Performance
Stat of
Carrier
HRPD
Sessions
292
PRS
Performance Report Reference
Subrep
ort
Name
Session
Setup
Fail
Times
TOPN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID Request
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures
[Times]
none
Performance
Stat of
Carrier
HRPD
Sessions
Performance
Stat of
Carrier
HRPD
Sessions
293
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
attemp Failures(No
HardwareID Request
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
294
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Session
Released
from AT
and AN
none
Performance
Stat of BSC
HRPD
Sessions
295
PRS
Performance Report Reference
Subrep
ort
Name
Causes of
HRPD
Session
Release
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Performance
Stat of BSC
HRPD
Sessions
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Released from AT
none
Performance
Stat of BSC
HRPD
Sessions
296
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
none
Performance
Stat of BSC
HRPD
Sessions
297
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Normal closed) [%]
none
Performance
Stat of BSC
HRPD
Sessions
298
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Protocol error) [%]
none
Performance
Stat of BSC
HRPD
Sessions
299
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Protocol
configuration failure)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
300
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Protocol negotiation
error) [%]
none
Performance
Stat of BSC
HRPD
Sessions
301
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Session
configuration failure)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
302
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Others) Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
303
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Configure failed)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
304
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Keep alive timer
expired) [%]
none
Performance
Stat of BSC
HRPD
Sessions
305
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(MML operated) [%]
none
Performance
Stat of BSC
HRPD
Sessions
306
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Authority failed)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
307
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Source AN release
in inter AN handoff)
[%]
none
Performance
Stat of BSC
HRPD
Sessions
308
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Release old session
in session setup) [%]
none
Performance
Stat of BSC
HRPD
Sessions
309
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Others) [%]
none
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
310
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Auth
Successf
ul Ratio
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Rejections [%]
none
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication
Rejections[Times]]/([Access
Authentication Attempts
[Times]]-[Successful Access
Authentications[Times]])*
{100}
Access
Authentication LCP
Failure [%]
none
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Apply Resource
Failure [%]
none
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication No
Resource[Times]]/([Access
Authentication Attempts
[Times]]-[Successful Access
Authentications[Times]])*
{100}
Causes of
the
Access
Auth Fail
Issue 02 (2011-08-25)
311
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Rejections(Other
causes)[%]
none
Performance
Stat of BSC
HRPD
Sessions
([Access Authentication
Attempts[Times]]-[Successful
Access Authentications
[Times]]-[Access
Authentication Rejections
[Times]]-[Access
Authentication LCP
Negotiation Failure[Times]][Access Authentication No
Resource[Times]])/([Access
Authentication Attempts
[Times]]-[Successful Access
Authentications[Times]])*
{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
312
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
KPI
Performance
Stat of
Carrier
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Performa
nce
Performance
Stat of
Carrier
HRPD
Sessions
313
PRS
Performance Report Reference
Subrep
ort
Name
Accessab
lity
Call
Retainabi
lity
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Release
none
EV-DO BSC
Traffic
Performance
Stat
314
PRS
Performance Report Reference
Subrep
ort
Name
Mobility
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
EV-DOB
BSC Traffic
Performance
Stat
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
CS of Call Release
Num
times
PS of Call Release
Num
times
PS Call Drop
Performance
Stat
Location Update
Assignment Success
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
Intra-AN Hard HO
Success Ratio(DO B)
[%]
Performance
Stat of IntraAN Hard HO
315
PRS
Performance Report Reference
Subrep
ort
Name
Service
Integrity
Network
Capabilit
y
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]*{100}
Successful Inter-AN
Hard HOs Ratio
(DOB)
none
Performance
Stat of InterAN Hard HO
Average Forward
Speed During of
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
none
RLP
Throughput
Stat
RLP
Throughput
Stat
RLP
Throughput
Stat
RLP
Throughput
Stat
RLP
Throughput
Stat
Forward RLP
Throughput[Kbps]
none
Performance
Stat of EVDO Service
Data
Throughput
316
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Reverse RLP
Throughput[kbps]
none
RLP
Throughput
Stat
Forward SAP
Throughput (DO B)
[Kbps]
none
RLP
Throughput
Stat
Reverse RLP
Throughput (DO B)
[Kbps]
none
Do Carrier
Performance
Mesurement
Traffic Density on
TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
none
none
317
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Coverage
Soft HO Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
Soft HO Ratio(DO
B)
none
EV-DOB
BSC Traffic
Performance
Stat
318
PRS
Performance Report Reference
Subrep
ort
Name
Resource
Usage
Ratio
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
none
none
none
Formula
319
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Integrity
RLP
Throughput
Stat
RLP
Throughput
Stat
Average Forward
Speed During of
Connetion Hoding
[kbps]
none
DO TCH
Forward RLP
Throughput
Stat
320
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RLP
Throughput
Stat
RLP
Throughput
Stat
Average Forward
Speed During of
Connetion Hoding
(DO B)
none
DO TCH
Forward RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
321
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Reverse
Speed
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Reverse
Speed
BottomN
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
322
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
none
EV-DOB
Carrier
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
323
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Forward
Speed
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
Average
Forward
Speed
byte
DO TCH
Forward RLP
Throughput
Stat
Average
Forward
Speed
BottomN
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion Hoding
[Times]
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
324
PRS
Performance Report Reference
NE Type
CBSC
Object Type
Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average
Forward
Speed
bytes
DO TCH
Forward RLP
Throughput
Stat
Average
Forward
Speed
BottomN
Average Forward
Speed During of DO
Connetion Hoding
no
unit
DO TCH
Forward RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion Hoding
[Times]
no
unit
Do Carrier
Performance
Mesurement
325
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
and
Reverse
Retransm
it
RLP
Throughput
Stat
RLP
Throughput
Stat
Forward
Reverse
Retransm
it(DOB)
RLP
Throughput
Stat
RLP
Throughput
Stat
326
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
RLP
Retransm
it TopN
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
Octets Resent on
request of AN Ratio
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse
RLP
Retransm
it TopN
Issue 02 (2011-08-25)
327
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
328
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
Feel Avg
Rate
BottomN
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward RLP
Throughput
Stat
Forward
Avg Rate
BottomN
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward RLP
Throughput
Stat
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
Forward
Avg Feel
Rate
BottomN
Issue 02 (2011-08-25)
329
PRS
Performance Report Reference
Subrep
ort
Name
Forward
Avg Rate
TopN
Forward
Avg Feel
Rate
TopN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Reverse
Speed During of DO
Connetion Hoding
none
Do Carrier
Performance
Mesurement
none
EV-DOB
Carrier
Traffic
Performance
Stat
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion Hoding
[Times]
none
Do Carrier
Performance
Mesurement
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward RLP
Throughput
Stat
330
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Average Forward
Speed During of DO
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
Average Reverse
Speed During of DO
Connetion Hoding
[Times]
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
331
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Service
Integrity
Average Forward
Speed During of
Connetion Hoding
none
DO TCH
Forward RLP
Throughput
Stat
none
DO TCH
Forward RLP
Throughput
Stat
User Forward
Average Feeling
Rate During Data
Transmission[kbps]
none
DO TCH
Forward RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
332
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Retainabi
lity
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Release
none
EV-DO BSC
Traffic
Performance
Stat
none
EV-DOB
BSC Traffic
Performance
Stat
333
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Ratio
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
334
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cause of
Call
Drops
Connection Released
(RF lost)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Released
(Dormancy timer
expired)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Released
(Dormancy timer
expired without AT
response)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
Connection Released
(Other causes)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Release
335
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Drop
Ratio
TopN
Connection Drop
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Drop
[times]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Normal Connection
Release[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
336
PRS
Performance Report Reference
Subrep
ort
Name
Call
Drop
Ratio
TopN
(DO B)
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection release
(RF lost)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection release
(Dormancy timer
expired)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection release
(Dormancy timer
expired without AT
response)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Release
(HHO Fail)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection release
(Other causes)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Drop
Ratio(DO B)[%]
Performance
Stat of
Carrier EVDO
Connection
Release
337
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Drop
(DO B)[times]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Normal Connection
Release(DO B)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection release
(RF lost)(DO B)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection release
(Dormancy timer
expired)(DO B)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection Release
(HHO Fail)(DO B)
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
Connection release
(Other causes)(DO
B)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
338
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Released
(Interoperation
Between 1X and DO)
(DO B)[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call
Retainabi
lity
Connection Drop
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Release
339
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Drop
Ratio(DO B)[%]
Performance
Stat of
Carrier EVDO
Connection
Release
none
EV-DO
Carrier
Traffic
Performance
Stat
none
EV-DOB
Carrier
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
340
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
341
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connecti
on Setup
Success
Ratio
Connection Requests
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Requests
(DO B)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio(DO B)[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Requests[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick
Conn
Setup
Success
Ratio
Issue 02 (2011-08-25)
342
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Conn
Setup
Failure
Reason
Connection Failures
(Call Resource
Allocation Failures)
[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (Call resources
allocation failure)[Times]]+
[AT-Initiated Connection
Failures (Call resources
allocation failure)[Times]]
Connection Failures
(No R-TCH
Detected)[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (No R-TCH Detected)
[Times]]+[AT-initiated
Connection Failures (No RTCH Detected)[Times]]
Connection Failures
(No Traffic Channel
Complete received)
[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]+
[AT-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]
343
PRS
Performance Report Reference
Subrep
ort
Name
Quick
Conn
Setup
Failure
Reason
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Failures
(MEID Connection
rejected )[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AT-Initiated Connection
Failures (MEID Connection
Reject)[Times]]+[ANInitiated Connection Failures
(MEID Connection Reject)
[Times]]
Connection Failures
(other reason)
[Times]
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Failures (Other causes)
[Times]]+[AT-Initiated
Connection Failures (Other
causes)[Times]]
Quick Connection
Failures (Call
resources allocation
failure)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No R-TCH
detected)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No Traffic
Channel Complete
received)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (MEID
Connection Reject)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (Other
causes)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
344
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Conn
Setup
Succ
Ratio
BottomN
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Requests
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Failures
(Call resources
allocation failure)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Call resources
allocation failure)[Times]]+
[AT-Initiated Connection
Failures (Call resources
allocation failure)[Times]]
345
PRS
Performance Report Reference
Subrep
ort
Name
Conn
Setup
Failure
Times
TopN
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Failures
(No R-TCH
Detected)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No R-TCH Detected)
[Times]]+[AT-initiated
Connection Failures (No RTCH Detected)[Times]]
Connection Failures
(No Traffic Channel
Complete received)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]+
[AT-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]
Connection Failures
(MEID Connection
Reject)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AT-Initiated Connection
Failures (MEID Connection
Reject)[Times]]+[ANInitiated Connection Failures
(MEID Connection Reject)
[Times]]
Connection Failures
(Other causes)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Other causes)
[Times]]+[AT-Initiated
Connection Failures (Other
causes)[Times]]
Connection Failures
Times[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[Connection Requests
[Times]]-[Successful
Connection Times[Times]]
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Failures
(Call resources
allocation failure)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Call resources
allocation failure)[Times]]+
[AT-Initiated Connection
Failures (Call resources
allocation failure)[Times]]
346
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Failures
(No R-TCH
Detected)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No R-TCH Detected)
[Times]]+[AT-initiated
Connection Failures (No RTCH Detected)[Times]]
Connection Failures
(No Traffic Channel
Complete received)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]+
[AT-Initiated Connection
Failures (No Traffic Channel
Complete received)[Times]]
Connection Failures
(MEID Connection
Reject)[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AT-Initiated Connection
Failures (MEID Connection
Reject)[Times]]+[ANInitiated Connection Failures
(MEID Connection Reject)
[Times]]
Connection Failures
(Other causes)
[Times]
none
Performance
Stat of
Carrier EVDO
Connection
Setup
[AN-Initiated Connection
Failures (Other causes)
[Times]]+[AT-Initiated
Connection Failures (Other
causes)[Times]]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
347
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Avg
Conn
Setup
Duration
Connection Setup
Duration
none
Successful
Connection Times
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
348
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Conn
Setup
Duration
TopN
Connection Setup
Average Duration
[Millisecond]
ms
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Requests
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
349
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Paging
Success
Ratio
EV-DO Paging
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
none
Performance
Stat of BSC
EV-DO
Connection
Setup
[AN-Initiated Connection
Requests[Times]]/[ATInitiated Connection Requests
[Times]]
Orig
Time to
Term
Time
Ratio
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
350
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Success
Ratio(DO B)[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
351
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Capacity
Analysis
Forward RLP
Throughput[Mbps]
none
Performance
Stat of EVDO Service
Data
Throughput
Reverse RLP
Throughput[Mbps]
none
RLP
Throughput
Stat
Traffic Density on
TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
Average Traffic
Density on TCH of
High-Load Carriers
[Erl]
none
RLP
Throughput
Stat
Forward SAP
Throughput (DO B)
[Kbps]
none
RLP
Throughput
Stat
none
RLP
Throughput
Stat
352
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic Density on
TCH(DO B)
none
EV-DOB
BSC Traffic
Performance
Stat
Access
Authentication
Rejections(Other
causes)[%]
none
Performance
Stat of BSC
HRPD
Sessions
([Access Authentication
Attempts[Times]]-[Successful
Access Authentications
[Times]]-[Access
Authentication Rejections
[Times]]-[Access
Authentication LCP
Negotiation Failure[Times]][Access Authentication No
Resource[Times]])/([Access
Authentication Attempts
[Times]]-[Successful Access
Authentications[Times]])*
{100}
none
none
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
353
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
(DO)
Traffic Density on
TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
CE Traffic Density
on TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
MacIndex Traffic
Density on TCH[Erl]
none
EV-DO BSC
Traffic
Performance
Stat
354
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
(DOB)
Traffic Density on
TCH(DO B)
none
EV-DOB
BSC Traffic
Performance
Stat
CE Traffic Density
on TCH(DO B)[Erl]
none
EV-DOB
BSC Traffic
Performance
Stat
MacIndex Traffic
Density on TCH(DO
B)[Erl]
none
EV-DOB
BSC Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
355
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Highest
Traffic
on TCH
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Traffic Channel
Connection Duration
[Second]
none
EV-DO
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
MacIndex Traffic
Density on TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Highest
Traffic
on TCH
(DO B)
Issue 02 (2011-08-25)
356
PRS
Performance Report Reference
Subrep
ort
Name
Lowest
Traffic
on TCH
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
DO B Traffic
Channel Connection
Duration(DO B)
[Second]
EV-DOB
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density(DO B)
none
EV-DOB
Carrier
Traffic
Performance
Stat
MacIndex Traffic
Density on TCH(DO
B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
357
PRS
Performance Report Reference
Subrep
ort
Name
Lowest
Traffic
on TCH
(DOB)
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
MacIndex Traffic
Density on TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
DO B Traffic
Channel Connection
Duration(DO B)
[Second]
EV-DOB
Carrier
Traffic
Performance
Stat
Reverse CE Traffic
Density(DO B)
none
EV-DOB
Carrier
Traffic
Performance
Stat
MacIndex Traffic
Density on TCH(DO
B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
358
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CCH
Load
DO CCH Average
Slot Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Synchronous Packet
Occupancy Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Sub-Synchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Asynchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
359
PRS
Performance Report Reference
Subrep
ort
Name
DO ACH
Load
Analysis
Forward
Load
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
DO CCH Discarded
Sync Message Ratio
[%]
none
DO CCH
Discard
Performance
Stat
DO CCH Discarded
Asynchronous
Message Ratio[%]
none
DO CCH
Discard
Performance
Stat
DO ACH Average
Slot Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Maximum
Slot Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Minimum
Slot Occupancy
Raito[%]
DO ACH
performance
Stat
DO ACH Average
Collision Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Maximum
Collision Occupancy
Raito[%]
none
DO ACH
performance
Stat
DO ACH Minimum
Collision Occupancy
Raito[%]
DO ACH
performance
Stat
DO TCH Average
Slot Occupancy
Ratio[0.01%]
none
DO TCH
Load
Performance
Stat
DO TCH Maximum
Slot Occupancy
Ratio[0.01%]
none
DO TCH
Load
Performance
Stat
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
360
PRS
Performance Report Reference
Subrep
ort
Name
Reverse
Load
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
byte
DO TCH
Forward RLP
Throughput
Stat
DO TCH Average
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Maximum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Minimum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Reverse
Load[1/8db]
none
DO TCH
Load
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
361
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
Reverse
RLP
Through
put
Forward RLP
Throughput[MB]
none
RLP
Throughput
Stat
Reverse RLP
Throughput[MB]
none
RLP
Throughput
Stat
Forward RLP
Throughput(DO B)
[MB]
none
RLP
Throughput
Stat
Reverse RLP
Throughput(DO B)
[MB]
none
RLP
Throughput
Stat
Forw and
Reve
Through
put
(DOB)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
362
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Max
Forward
RLP
Through
put
DO FTCH Forward
RLP Layer Transmit
Throughput[KB]
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[KB]
none
DO TCH
Forward RLP
Throughput
Stat
Max
Forward
RLP
Through
put
(DOB)
byte
DO TCH
Forward RLP
Throughput
Stat
none
DO TCH
Forward RLP
Throughput
Stat
Min
Forward
RLP
Through
put
DO FTCH Forward
RLP Layer Transmit
Throughput[KB]
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[KB]
none
DO TCH
Forward RLP
Throughput
Stat
Min
Forward
RLP
Through
put
(DOB)
byte
DO TCH
Forward RLP
Throughput
Stat
none
DO TCH
Forward RLP
Throughput
Stat
363
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Max
Reverse
RLP
Through
put
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
Max
Reverse
RLP
Through
put
(DOB)
Min
Reverse
RLP
Through
put
Issue 02 (2011-08-25)
364
PRS
Performance Report Reference
Subrep
ort
Name
Min
Reverse
RLP
Through
put
(DOB)
Counter
Coun
ter
Unit
Function
Subset
Formula
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
none
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[KB]
none
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
365
PRS
Performance Report Reference
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Capacity
Analysis
Traffic Density on
TCH[Erl]
none
EV-DO
Carrier
Traffic
Performance
Stat
none
DO TCH
Forward RLP
Throughput
Stat
DO TCH Average
Slot Occupancy
Ratio[%]
none
DO TCH
Load
Performance
Stat
DO CCH Average
Slot Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO ACH Average
Slot Occupancy
Raito[%]
none
DO ACH
performance
Stat
Reverse RLP
Throughput[kbps]
none
Do Carrier
Performance
Mesurement
366
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Capacity
Analysis
(DO B)
Traffic Density on
TCH(DO B)[Erl]
none
EV-DOB
Carrier
Traffic
Performance
Stat
Forward SAP
Throughput (DO B)
[Kbps]
none
DO TCH
Forward RLP
Throughput
Stat
Reverse RLP
Throughput (DO B)
[Kbps]
none
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
367
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Coverage
Analysis
Soft HO Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
Soft HO Ratio(DO
B)
none
EV-DOB
BSC Traffic
Performance
Stat
368
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
none
none
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
369
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Main
RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Main and
Div RSSI
Diff Desc
Difference Between
Main And Diversity
RSSI Average Value
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Main
RSSI Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div RSSI
Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
370
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Pilot
Strength
Proportio
n
Access Times by
Access Pilot Strength
(-0,-2) Ratio[%]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
371
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot Strength
(-2.5,-4.5) Ratio[%]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-5,-7) Ratio[%]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-7.5,-10)Ratio
none
EV-DO BSC
Cover
Performance
Stat of
Access State
372
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot Strength
(-10.5,-31.5)[Times]
none
EV-DO BSC
Cover
Performance
Stat of
Access State
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
373
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft
Handoff
Ratio
Soft HO Ratio[%]
none
EV-DO BSC
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
374
PRS
Performance Report Reference
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft
Handoff
Ratio
Desc
none
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
Seizure Total time
none
EV-DO BSC
Traffic
Performance
Stat
CE Seizure Total
time[Second]
none
EV-DO BSC
Traffic
Performance
Stat
375
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Soft
Handoff
Ratio
Asc
none
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
Seizure Total time
none
EV-DO BSC
Traffic
Performance
Stat
CE Seizure Total
time[Second]
none
EV-DO BSC
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
376
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Avg Pilot
Strength
Proportio
n
Access Times by
Access Pilot Strength
(0,2)[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-2.5,-4.5)[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-5,-7)[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-7.5,-10)[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
377
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot Strength
(-10.5,-31.5)[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN
HHO
Incoming
Outgoing
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]
378
PRS
Performance Report Reference
Subrep
ort
Name
Inter-AN
HHO
Income
Outgo
(DOB)
Inter-AN
HHO
Incoming
Fail
Inter-AN
HHO
Outcgoin
g Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Inter-AN
Hard HOs Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs[Times]]/[Inter-AN
Hard HO Requests[Times]]
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]*{100}
Successful Inter-AN
Hard HOs Ratio(DO
B)
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs(DO B)[Times]]/
[Inter-AN Hard HO Requests
(DO B)[Times]]
Inter-AN Incoming
Hard HOs Failures
(Resource Allocation
Failed)[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of InterAN Hard HO
379
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN
HHO
Incoming
Success
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]
Inter-AN Incoming
Hard HO Requests
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Resource Allocation
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
380
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Incoming
Success
BottomN
(DOB)
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]
Inter-AN Incoming
Hard HO Requests
(DO B)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Incoming Hard HOs
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Hard HOs Ratio[%]
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs[Times]]/[Inter-AN
Hard HO Requests[Times]]
Successful Inter-AN
Hard HOs[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Outgoing
Success
BottomN
Issue 02 (2011-08-25)
381
PRS
Performance Report Reference
Subrep
ort
Name
Outgoing
Success
BottomN
(DOB)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Outgoing Hard HO
Ratio(DO B)[%]
none
Performance
Stat of
Carrier InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs(DO B)[Times]]/
[Inter-AN Hard HO Requests
(DO B)[Times]]
Inter-AN Hard HO
Requests(DO B)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
382
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
HHO
Success
Ratio
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Requests(DO B)
[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Success Ratio(DO B)
[%]
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-BS
HHO
Failures
Causes
Issue 02 (2011-08-25)
383
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of IntraAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
HHO
SuccR
BottomN
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
384
PRS
Performance Report Reference
Subrep
ort
Name
Intra-BS
HHO
SuccR
BottomN
(DO B)
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Success Ratio(DO B)
[%]
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Requests(DO B)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
385
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Analysis
KPI
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
none
Performance
Stat of BSC
HRPD
Sessions
none
Performance
Stat of BSC
HRPD
Sessions
386
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Inter-AN
Incoming Hard HOs
Ratio(DO B)
none
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs(DO B)
[Times]]/[Inter-AN Incoming
Hard HO Requests(DO B)
[Times]]*{100}
Successful Inter-AN
Hard HOs Ratio
(DOB)
none
Performance
Stat of InterAN Hard HO
Location Update
Assignment Success
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
A13 Session
Information Query
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Intra-AN Hard HO
Success Ratio(DO B)
[%]
Performance
Stat of IntraAN Hard HO
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]
Successful Inter-AN
Hard HOs Ratio[%]
none
Performance
Stat of InterAN Hard HO
{100}*[Successful Inter-AN
Hard HOs[Times]]/[Inter-AN
Hard HO Requests[Times]]
PS of Call Release
Num
times
PS Call Drop
Performance
Stat
387
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
SHO
Success
Ratio
Inter-BS Soft HO
Success Ratio(DO B)
[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Requests (DO B)
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Requests Times
[Times]
none
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
388
PRS
Performance Report Reference
Subrep
ort
Name
Inter-BS
SHO
Failures
Causes
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Success [%]
none
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Radio
resources
unavailable) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
EV-DO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (MS
rejected) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (A17/A18
link setup failed) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
389
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS Soft HO
Failures (Other
causes) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
SHO
Success
Ratio
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
390
PRS
Performance Report Reference
Subrep
ort
Name
Intra-BS
SHO
Failures
Causes
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
requests EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Success Ratio(DO B)
[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Requests (DO B)
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
391
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
SHO
SuccR
BottomN
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
requests EV-DO
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EV-DO
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
392
PRS
Performance Report Reference
Subrep
ort
Name
Intra-BS
SHO
SuccR
BottomN
(DOB)
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Success Ratio(DO B)
[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Requests (DO B)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EV-DO
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
393
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
394
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Transfer
and
Location
Update
none
Performance
Stat of BSC
HRPD
Sessions
A13 Session
Information Query
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Location Update
Assignment Success
Ratio[%]
none
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
395
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Analysis
KPI
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of
Carrier IntraAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBTS
Issue 02 (2011-08-25)
396
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
High
Load of
Abis
Average Total
Bandwidth Occupied
by Forward 1x and
DO Services Shared
Abis Link [kbps]
kiloby
tes/
secon
d
BTS3606
Abis Link
Resource
Performance
Stat
Average Total
Bandwidth Occupied
by Forward DO
Service Dedicated
Abis Link [kbps]
kiloby
tes/
secon
d
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 81%-90% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 71%-80% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 61%-70% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 31%-60% [s]
BTS3606
Abis Link
Resource
Performance
Stat
Duration of Forward
1X and DO Services
Shared Abis Link
with Bandwidth
Usage 0%-30% [s]
BTS3606
Abis Link
Resource
Performance
Stat
BTS3606
Board CPU
Occupancy
Performance
Stat
397
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 91%-100% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 81%-90% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 71%-80% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 61%-70% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 31%-60% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
Duration of Forward
DO Service
Dedicated Abis Link
with Bandwidth
Usage 0%-30% [s]
BTS3900
CDMA Abis
Link
Resource
Performance
Stat
398
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CSPU
CPU
Utilizatio
n
CSPU CPU
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
399
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Carrier
Ratio
none
Worst
Carrier
Ratio
(DO B)
none
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
400
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC Carrier
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
DO Average Reverse
Channels Occupation
Ratio By Common
Channels Per
Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
DO Max Reverse
Channels Occupation
Ratio By Common
Channels Per
Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
DO Max Available
Reverse Channels By
Channels Per
Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
DO Min Available
Reverse Channels By
Channels Per
Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
DO Max Reverse
Channels Occupied
By Traffic Channels
Per Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
401
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO Average Reverse
Channels Occupied
By Traffic Channels
Per Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
Channels Occupied
By Common
Channels Per
Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
DO Average Reverse
Channels Occupied
By Common
Channels Per
Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
402
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
DO Average
Forward MacIndexs
Occupation Ratio By
Traffic Channels
[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
MacIndexs
Occupation Ratio By
Traffic Channels
[entries]
none
DO Channel
Element
Performance
Stat
DO Available
Forward MacIndexs
per sector carrier
[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
MacIndexs Occupied
By Traffic Channels
per sector carrier
[entries]
none
DO Channel
Element
Performance
Stat
DO Average
Forward MacIndexs
Occupied By Traffic
Channels Per sector
carrier[entries]
none
DO Channel
Element
Performance
Stat
DO Max Forward
MacIndexs Occupied
By Common
Channels Per sector
carrier[entries]
none
DO Channel
Element
Performance
Stat
DO Average
Forward MacIndexs
Occupied By
Common Channels
Per sector carrier
[entries]
none
DO Channel
Element
Performance
Stat
403
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
Average Total
Bandwidth Occupied
by Forward DO
Service Dedicated
Abis Link [kbps]/
Average Total
Bandwidth Occupied
by Reverse DO
Service Dedicated
Abis Link [kbps]
none
BTS3606
Abis Link
Resource
Performance
Stat
Average Total
Bandwidth Occupied
by Forward 1x and
DO Services Shared
Abis Link [kbps]/
Average Total
Bandwidth Occupied
by Reverse 1x and
DO Services Shared
Abis Link [kbps]
none
BTS3606
Abis Link
Resource
Performance
Stat
404
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Reverse
Congesti
on of
Abis
BTS3606
Abis Link
Congestion
Performance
Stat
times
BTS3606
Abis Link
Congestion
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
405
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
FER of
the Abis
Link
TopN
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
406
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Interrupti
on
Duration
times
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
BTS3606
Abis Link
Quality
Performance
Stat
times
BTS3606
Abis Link
Quality
Performance
Stat
407
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Abis Om Link
Interrupt Times
[times]
times
BTS3606
Abis Link
Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Reverse
Congesti
on of
Abis
BTS3900
CDMA Abis
Link
Congestion
Performance
Stat
408
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
BTS3900
CDMA Abis
Link
Congestion
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
FER of
the Abis
Link
TopN
BTS3900
CDMA Abis
Link Quality
Performance
Stat
409
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS3900
CDMA Abis
Link Quality
Performance
Stat
BTS3900
CDMA Abis
Link Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Interrupti
on
Duration
times
BTS3900
CDMA Abis
Link Quality
Performance
Stat
410
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS3900
CDMA Abis
Link Quality
Performance
Stat
BTS3900
CDMA Abis
Link Quality
Performance
Stat
BTS3900
CDMA Abis
Link Quality
Performance
Stat
times
BTS3900
CDMA Abis
Link Quality
Performance
Stat
Abis Om Link
Interrupt Times
[times]
times
BTS3900
CDMA Abis
Link Quality
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
411
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
CSPU CPU
Performance
Stat
none
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC Carrier
Issue 02 (2011-08-25)
412
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Resource
Utilizatio
n
DO Average Reverse
Channels Occupation
Ratio By Common
Channels Per
Resource Pool
[entries]
none
DO Channel
Element
Performance
Stat
DO Average
Forward MacIndexs
Occupation Ratio By
Traffic Channels
[entries]
none
DO Channel
Element
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
413
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Forward
and
Reverse
RLP
Layer
Retransm
it
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AT[Byte]]/({1024}*
[Total RLP Octets Sent on
Forward Channels[KB]]))
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AN[Byte]]/({1024}
*[RLP Octets Received on
Reverse Channels[KB]]))
Octets
Resent
on
Request
of AN
Ratio
Octets Resent on
request of AN Ratio
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
414
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
DO
FTCH
Forward
RLP
Layer
Retransm
it Ratio
Desc
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
415
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Connecti
on Drop
Ratio
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
416
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Number
and
Subscrib
e Active
Ratio
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Minimum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Subscribe Active
Ratio
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
417
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Session
Setup
Success
Ratio
Performance
Stat of BSC
HRPD
Sessions
times
Performance
Stat of BSC
HRPD
Sessions
HRPD
Session
Setup
Failure
HRPD Session
attemp Failures(No
HardwareID Request
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
Ratio
none
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received) Ratio
none
Performance
Stat of BSC
HRPD
Sessions
Performance
Stat of
Carrier
HRPD
Sessions
Carrier
Session
Setup
Issue 02 (2011-08-25)
418
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID Request
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIAssignment
Sent)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
HardwareID
Response Received)
[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
HRPD Session
attemp Failures(No
UATIComplete
Received)[Times]
times
Performance
Stat of
Carrier
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
419
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Released
from AT
and AN
HRPD Session
Released from AN
times
Performance
Stat of BSC
HRPD
Sessions
HRPD Session
Released from AT
none
Performance
Stat of BSC
HRPD
Sessions
420
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Released
Reason
HRPD Session
Released from AT
(Normal closed)
Ratio
Performance
Stat of BSC
HRPD
Sessions
421
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Protocol negotiation
error) Ratio
Performance
Stat of BSC
HRPD
Sessions
422
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Others) Ratio
Performance
Stat of BSC
HRPD
Sessions
423
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Authority failed)
Ratio
Performance
Stat of BSC
HRPD
Sessions
424
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Protocol error) Ratio
Performance
Stat of BSC
HRPD
Sessions
425
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Source AN release
in inter AN handoff)
Ratio
Performance
Stat of BSC
HRPD
Sessions
426
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Session
configuration failure)
Ratio
Performance
Stat of BSC
HRPD
Sessions
427
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(MML operated)
Ratio
Performance
Stat of BSC
HRPD
Sessions
428
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Others) Ratio
Performance
Stat of BSC
HRPD
Sessions
429
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Configure failed)
Ratio
Performance
Stat of BSC
HRPD
Sessions
430
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AT
(Protocol
configuration failure)
Ratio
Performance
Stat of BSC
HRPD
Sessions
431
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Release old session
in session setup)
Ratio
Performance
Stat of BSC
HRPD
Sessions
432
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD Session
Released from AN
(Keep alive timer
expired) Ratio
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
433
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authenti
cation
Success
Ratio
Access
Authentication
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
([Successful Access
Authentications[Times]]/
[Access Authentication
Attempts[Times]])*{100}
Access
Authenti
cation
Failure
Access
Authentication
Rejections Ratio
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication
Rejections[Times]]/[Access
Authentications Failure
[Times]]*{100}
Access
Authentication LCP
Negotiation Failure
Ratio
Performance
Stat of BSC
HRPD
Sessions
Called Number/Call
Number
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication No
Resource[Times]]/[Access
Authentications Failure
[Times]]*{100}
434
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Rejections(Other
causes) Ratio
Performance
Stat of BSC
HRPD
Sessions
([Access Authentication No
Resource[Times]]-[Access
Authentication Rejections
[Times]]-[Access
Authentication LCP
Negotiation Failure[Times]][Access Authentication No
Resource[Times]])/[Access
Authentications Failure
[Times]]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
435
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Quick
Connecti
on Setup
Success
Ratio
Connection Requests
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick
BSC
Connecti
on Setup
Success
Ratio
Quick Connection
Requests[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
436
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Connecti
on Setup
Failure
Reason
AN-Initiated
Connection Failures
(No R-TCH
Detected)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
AN-Initiated
Connection Failures
(Call resources
allocation failure)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
AN-Initiated
Connection Failures
(No Traffic Channel
Complete received)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
AN-Initiated
Connection Failures
(Other causes)
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No R-TCH
detected)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (Call
resources allocation
failure)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (No Traffic
Channel Complete
received)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Quick Connection
Failures (Other
causes)[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
437
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
with The
Worst
Connecti
on Setup
Success
Connection Success
Ratio[%]
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Requests
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
438
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Called
Number
in
Proportio
n to Call
Number
Connection Requests
[Times]
times
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Setup
Duration
ms
Performance
Stat of BSC
EV-DO
Connection
Setup
[Connection Requests[Times]]
*[Connection Setup Average
Duration[Millisecond]]/
[Successful Connection Times
[Times]]
The
Carrier
Order by
Connecti
on Setup
Duration
Connection Setup
Average Duration
[Millisecond]
ms
Performance
Stat of
Carrier EVDO
Connection
Setup
Connection Requests
[Times]
times
Performance
Stat of
Carrier EVDO
Connection
Setup
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
439
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Paging
Success
Ratio
EV-DO Paging
Attempts[Times]
times
Performance
Stat of BSC
HRPD
Sessions
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Called Number/Call
Number
Performance
Stat of BSC
HRPD
Sessions
[Access Authentication No
Resource[Times]]/[Access
Authentications Failure
[Times]]*{100}
Called
Number
in
Proportio
n to Call
Number
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
440
PRS
Performance Report Reference
Object Type
CBTS
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Main
RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div RSSI
Desc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Differenc
e
between
Main
RSSI and
Div RSSI
Difference Between
Main And Diversity
RSSI Average Value
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Main
RSSI Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
Carrier
order by
Div RSSI
Asc
none
RSSI
Performance
Stat
none
RSSI
Performance
Stat
441
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Distributi
on of
IntraBSC AT
Access
Pilot
Strength
Access Times by
Access Pilot Strength
(-0,-2) Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
442
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot Strength
(-10.5,-31.5) Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-2.5,-4.5) Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-5,-7) Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
443
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access Times by
Access Pilot Strength
(-7.5,-10) Ratio
EV-DO BSC
Cover
Performance
Stat of
Access State
Access Times by
Access Pilot Strength
(-10.5,-31.5)[Times]
times
EV-DO
Carrier
Cover
Performance
Stat of
Access State
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
444
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC Soft
HO Ratio
Soft HO Ratio
EV-DO BSC
Traffic
Performance
Stat
Carrier
order by
Soft HO
Ratio
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Seizure Total time
EV-DO
Carrier
Traffic
Performance
Stat
CE Total time
EV-DO
Carrier
Traffic
Performance
Stat
445
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Soft HO
Ratio
Asc
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Seizure Total time
EV-DO
Carrier
Traffic
Performance
Stat
CE Total time
EV-DO
Carrier
Traffic
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
446
PRS
Performance Report Reference
Object Type
CBTS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
order by
Forward
Through
put Desc
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
Carrier
order by
Forward
Through
put Asc
DO FTCH Forward
RLP Layer Transmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
DO FTCH Forward
RLP Layer
Retransmit
Throughput[byte]
none
DO TCH
Forward RLP
Throughput
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Traffic Report
Report Type
Simple Report
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
447
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Trend
DO Traffic Channel
Connection Strength
Erl
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
CE Strength
Erl
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
MacIndex Strength
Erl
EV-DO BSC
Traffic
Performance
Stat
DO Traffic Channel
Connection Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Connection Total
time
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
CE Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
MacIndex Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
Carrier
Order by
TCH
Traffic
Desc
Issue 02 (2011-08-25)
448
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
Order by
TCH
Traffic
Asc
DO Traffic Channel
Connection Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
Connection Total
time
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
CE Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
DO Traffic Channel
MacIndex Strength
Erl
EV-DO
Carrier
Traffic
Performance
Stat
Max Active
Connectors of
Carrier[Entries]
numb
er
Performance
Stat of
Carrier EVDO
Connection
Release
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
449
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBTS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Carrier
Order by
EVDO
CCH
Load
Desc
DO CCH Average
Packet Occupancy
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Synchronous Packet
Occupancy Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Asynchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Average
Sub-Synchronous
Packet Occupancy
Ratio[%]
none
DO CCH
Using Ratio
Performance
Stat
DO CCH Discarded
Sync Message Ratio
[%]
none
DO CCH
Discard
Performance
Stat
DO CCH Discarded
Asynchronous
Message Ratio[%]
none
DO CCH
Discard
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
Carrier
Order by
ACH
Channel
Load
Desc
Issue 02 (2011-08-25)
450
PRS
Performance Report Reference
Subrep
ort
Name
Carrier
Order by
TCH
Reverse
Load
Desc
Counter
Coun
ter
Unit
Function
Subset
Formula
none
ACH
Performance
Stat
ACH Average
Collision Ratio[%]
none
ACH
Performance
Stat
none
ACH
Performance
Stat
none
ACH
Performance
Stat
DO TCH Average
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Maximum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Minimum
ROT[1/8db]
none
DO TCH
Load
Performance
Stat
DO TCH Reverse
Load[1/8db]
none
DO TCH
Load
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
451
PRS
Performance Report Reference
NE Type
CBSC
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BSC
Forward
and
Reverse
RLP
Layer
Through
put Trend
Forward Octets
Between PCF and
BSC[KB]
kiloby
tes
RLP
Throughput
Stat
kiloby
tes
RLP
Throughput
Stat
Carrier
Order by
Reverse
Through
put Asc
kiloby
tes
Do Carrier
Performance
Mesurement
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Carrier
Order by
Reverse
Through
put Desc
Issue 02 (2011-08-25)
452
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
byte
Do Carrier
Performance
Mesurement
Octets Resent on
request of AN[Byte]
byte
Do Carrier
Performance
Mesurement
kiloby
tes
Do Carrier
Performance
Mesurement
Reverse Abort
[Times]
times
Do Carrier
Performance
Mesurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
453
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
EVDO
Inter-AN
Incoming
Hard HO
and Hard
HO
Success
Ratio
Trend
Successful Inter-AN
Incoming Hard HOs
Ratio
Performance
Stat of InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]*{100}
Successful Inter-AN
Hard HOs Ratio
Performance
Stat of InterAN Hard HO
Inter-AN
Hard HO
Failure
Inter-AN Hard HO
Failures (Radio
resources
unavailable) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Resource Allocation
Failed) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN
Incoming
Hard HO
Failure
Issue 02 (2011-08-25)
454
PRS
Performance Report Reference
Subrep
ort
Name
Carrier
Order by
Inter-AN
Incoming
Hard HO
Carrier
Order by
Inter-AN
Hard HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes) Ratio
Performance
Stat of InterAN Hard HO
Inter-AN Incoming
Hard HO Requests
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Incoming Hard HOs
Ratio
Performance
Stat of
Carrier InterAN Hard HO
[Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]]*{100}
Inter-AN Incoming
Hard HOs Failures
(Resource Allocation
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(HO Execution
Failed)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Incoming
Hard HOs Failures
(Other causes)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Requests[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Successful Inter-AN
Hard HOs Ratio
Performance
Stat of
Carrier InterAN Hard HO
455
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
Inter-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier InterAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
456
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN
Hard HO
and
Success
Ratio
Trend
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
Intra-AN
Hard HO
Failure
Reason
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
Ratio
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes) Ratio
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Radio
resources
unavailable) Ratio
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable) Ratio
Performance
Stat of IntraAN Hard HO
Intra-AN Hard HO
Requests[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of
Carrier IntraAN Hard HO
Carrier
whth the
Worst
Intra-AN
Hard HO
Issue 02 (2011-08-25)
457
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-AN Hard HO
Failures (Radio
resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Requested
terrestrial resources
unavailable)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (MS Not
detected by
destination pilot)
[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
Intra-AN Hard HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier IntraAN Hard HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Issue 02 (2011-08-25)
458
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-BS
SHO
Success
Ratio
Inter-BS Soft HO
Failures (Radio
resources
unavailable) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Requested
Abis resources
unavailable) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Radio
interface abnormal)
EV-DO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (MS
rejected) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (A17/A18
link setup failed) EVDO[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Failures (Other
causes) EV-DO
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS Soft HO
Requests Times
[Times]
times
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
Inter-BS
SHO
Failures
Causes
Issue 02 (2011-08-25)
459
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
InterBS Soft HO
Success Ratio[%]
Performance
Stat of BSC
EV-DO
Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS
Soft HO
requests
and
Success
Intra-BS Soft HO
Requests[Times]
times
Intra-BSC
Soft HO
Performance
Stat
460
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Ratio
Trend
Intra-BS Soft HO
Success Ratio[%]
Intra-BSC
Soft HO
Performance
Stat
Distributi
on of
Intra-BS
Soft HO
Failure
Intra-BS Soft HO
Failures (Other
causes) Ratio
Intra-BSC
Soft HO
Performance
Stat
Inter-BS Soft HO
Failures (Radio
resources
unavailable) Ratio
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Radio
interface abnormal)
Ratio
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable) Ratio
Intra-BSC
Soft HO
Performance
Stat
Intra-BS Soft HO
requests EV-DO
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Carrier
Order by
Intra-BS
Soft HO
Success
Ratio
Issue 02 (2011-08-25)
461
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Intra-BS Soft HO
Failures (Radio
resources
unavailable) EV-DO
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Requested
Abis resources
unavailable)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Radio
interface abnormal)
[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
Intra-BS Soft HO
Failures (Other
causes)[Times]
times
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
462
PRS
Performance Report Reference
Object Type
CBSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Transfer
and
Location
Update
none
Performance
Stat of BSC
HRPD
Sessions
A13 Session
Information Query
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Location Update
Assignment Success
Ratio
Performance
Stat of BSC
HRPD
Sessions
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Issue 02 (2011-08-25)
463
PRS
Performance Report Reference
Object Type
CBTS
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO
Reverse
Resource
Usage
Ratio
Sort
BTS3606
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Service Channels
Ratio
BTS3606
DO Channel
Element
Performance
Stat
DO Max Available
Reverse CEs[entries]
none
BTS3606
DO Channel
Element
Performance
Stat
DO Min Available
Reverse CEs[entries]
none
BTS3606
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Traffic Channels
[entries]
none
BTS3606
DO Channel
Element
Performance
Stat
none
BTS3606
DO Channel
Element
Performance
Stat
464
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBTS
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DO CE
Reverse
Resource
Usage
Ratio
Sort
BTS3612
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Service Channels
Ratio
BTS3612
DO Channel
Element
Performance
Stat
DO Min Available
Reverse CEs[entries]
none
BTS3612
DO Channel
Element
Performance
Stat
DO Max Available
Reverse CEs[entries]
none
BTS3612
DO Channel
Element
Performance
Stat
465
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
none
BTS3612
DO Channel
Element
Performance
Stat
DO Max Reverse
CEs Occupied By
Service Channels
[entries]
none
BTS3612
DO Channel
Element
Performance
Stat
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Performa
nce
Performance
Stat of BSC
HRPD
Sessions
466
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
none
Performance
Stat of BSC
EV-DO
Connection
Release
Mobility
Intra-BS Soft HO
Success Ratio[%]
Intra-BSC
Soft HO
Performance
Stat
Service
Integrity
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AT[Byte]]/({1024}*
[Total RLP Octets Sent on
Forward Channels[KB]]))
Accessab
lity
Call
Retainabi
lity
Issue 02 (2011-08-25)
467
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AN[Byte]]/({1024}
*[RLP Octets Received on
Reverse Channels[KB]]))
Forward RLP
Throughput[kbps]
kiloby
tes/
secon
d
Performance
Stat of EVDO Service
Data
Throughput
Reverse RLP
Throughput[kbps]
kbit/s
RLP
Throughput
Stat
Traffic Density on
TCH[Erl]
Erl
EV-DO BSC
Traffic
Performance
Stat
CS With PS(Not
Including HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Network
Coverage
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
Resource
Usage
Ratio
CS With PS
(Including Soft HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
Network
Capabilit
y
Issue 02 (2011-08-25)
468
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
CBSC
Object Type
CBSC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HRPD
Session
Performa
nce KPI
Group
Performance
Stat of BSC
HRPD
Sessions
ms
Performance
Stat of
Carrier
HRPD
Sessions
Maximum number of
active HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
Maximum HRPD
Sessions[Entries]
numb
er
Performance
Stat of BSC
HRPD
Sessions
469
PRS
Performance Report Reference
Subrep
ort
Name
Accessab
lity KPI
Group
Call
Retainabi
lity KPI
Group
Mobility
KPI
Group
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
Authentication
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
([Successful Access
Authentications[Times]]/
[Access Authentication
Attempts[Times]])*{100}
EV-DO Paging
Success Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Connection Success
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Setup
Connection Drop
Ratio[%]
Performance
Stat of BSC
EV-DO
Connection
Release
none
Performance
Stat of BSC
EV-DO
Connection
Release
Intra-AN Hard HO
Success Ratio[%]
Performance
Stat of IntraAN Hard HO
Inter-subnet
Dormant HO Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Successful Inter-AN
Incoming Hard HOs
Ratio[%]
Performance
Stat of InterAN Hard HO
([Successful Inter-AN
Incoming Hard HOs[Times]]/
[Inter-AN Incoming Hard HO
Requests[Times]])*{100}
470
PRS
Performance Report Reference
Subrep
ort
Name
Service
Integrity
KPI
Group
Capabilit
y KPI
Group
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Inter-AN
Hard HOs Ratio[%]
Performance
Stat of InterAN Hard HO
Location Update
Assignment Success
Ratio[%]
Performance
Stat of BSC
HRPD
Sessions
Intra-AN Soft HO
Success Ratio[%]
Performance
Stat of
Carrier EVDO Reverse
Channel Soft
HO
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AT[Byte]]/({1024}*
[Total RLP Octets Sent on
Forward Channels[KB]]))
RLP
Throughput
Stat
{100}*([Octets Resent on
request of AN[Byte]]/({1024}
*[RLP Octets Received on
Reverse Channels[KB]]))
Traffic Density on
TCH[Erl]
Erl
EV-DO BSC
Traffic
Performance
Stat
CS With PS(Not
Including HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
471
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Coverage
KPI
Group
Soft HO Ratio
EV-DO
Carrier
Traffic
Performance
Stat
Resource
Usage
Ratio
CS With PS
(Including Soft HO)
Erl
Carrier
Traffic
Performance
Stat(FCH)
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
472
PRS
Performance Report Reference
Issue 02 (2011-08-25)
473
PRS
Performance Report Reference
NE Type
CHLR
Object Type
CHLR
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CHLR
Number of HDB
Directives for Traffic
Control Started
times
Internal
Interface
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
474
PRS
Performance Report Reference
10
Issue 02 (2011-08-25)
475
PRS
Performance Report Reference
NE Type
CMSC
Object Type
CMSC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CMSC
Broadcast Short
Message First Paging
times
Broadcast
Paging
Measuremen
t
Broadcast Paging No
Response
times
Broadcast
Paging
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
476
PRS
Performance Report Reference
11
Issue 02 (2011-08-25)
477
PRS
Performance Report Reference
NE Type
GGSN
Object Type
UGW and GGSN
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AAA
performa
nce
Authentication
requests
times
AAA
performance
measurement
Authentication
successful ratio
AAA
performance
measurement
{100}*[Successful
authentication requests]/
[Authentication requests]
Accounting start
requests
times
AAA
performance
measurement
Accounting start
successful ratio
AAA
performance
measurement
{100}*[Successful accounting
start requests]/[Accounting
start requests]
Accounting stop
requests
times
AAA
performance
measurement
Accounting stop
successful ratio
AAA
performance
measurement
{100}*[Successful accounting
stop requests]/[Accounting
stop requests]
Real-time accounting
requests
times
AAA
performance
measurement
AAA
performance
measurement
{100}*[Successful real-time
accounting requests]/[Realtime accounting requests]
478
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
APN
AAA
Performa
nce
Authentication
requests
times
AAA
performance
measurement
(specified
APN)
Authentication
request success ratio
AAA
performance
measurement
(specified
APN)
{100}*[Successful
authentication requests]/
[Authentication requests]
Accounting start
requests
times
AAA
performance
measurement
(specified
APN)
Accounting request
success ratio
AAA
performance
measurement
(specified
APN)
{100}*[Successful accounting
start requests]/[Accounting
start requests]
Accounting stop
requests
times
AAA
performance
measurement
(specified
APN)
Accounting stop
success ratio
AAA
performance
measurement
(specified
APN)
{100}*[Successful accounting
stop requests]/[Accounting
stop requests]
Real-time accounting
requests
times
AAA
performance
measurement
(specified
APN)
AAA
performance
measurement
(specified
APN)
{100}*[Successful real-time
accounting requests]/[Realtime accounting requests]
479
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
GGSN
Object Type
UGW and GGSN
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Basic
session
service
PDP context
activation requests
times
GGSN Basic
session
performance
measurement
GGSN Basic
session
performance
measurement
{100}*[Successful PDP
context activations]/[PDP
context activation requests]
Current activated
PDP contexts
numb
er
GGSN Basic
session
performance
measurement
GTPv1 MS-init.
activation requests
times
GTPv1
session
measurement
(specified
APN)
Apn
session
performa
nce
Issue 02 (2011-08-25)
480
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
GTPv1
session
measurement
(specified
APN)
{100}*[Successful GTPv1
MS-init. activations]/[GTPv1
MS-init. activation requests]
GTPv0 MS-init.
activation requests
times
GTPv0
session
measurement
(specified
APN)
GTPv0
session
measurement
(specified
APN)
{100}*[Successful GTPv0
MS-init. activations]/[GTPv0
MS-init. activation requests]
Current activated
PDP contexts (APN)
numb
er
Session
status
measurement
(specified
APN)
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
GGSN
Object Type
UGW and GGSN
Issue 02 (2011-08-25)
481
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
transfer
measure
ment
Gn peak throughput
in MB/s
mb/
secon
d
GGSN
Forwarding
performance
measurement
Gi peak throughput
in MB/s
mb/
secon
d
GGSN
Forwarding
performance
measurement
Gn uplink traffic in
MB
MB
GGSN
Forwarding
performance
measurement
Gn downlink traffic
in MB
MB
GGSN
Forwarding
performance
measurement
Gi uplink traffic in
MB
MB
GGSN
Forwarding
performance
measurement
Gi downlink traffic in
MB
MB
GGSN
Forwarding
performance
measurement
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
482
PRS
Performance Report Reference
NE Type
GGSN
Object Type
Board
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
System
Resource
Measure
ment
System
resources
performance
measurement
(BOARD)
System
resources
performance
measurement
(BOARD)
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
483
PRS
Performance Report Reference
12
Issue 02 (2011-08-25)
484
PRS
Performance Report Reference
NE Type
HLR
Object Type
HLR Function
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HLR
Function
2G OCSI Subscribers
entrie
s
2G CAMEL
Subscriber
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
485
PRS
Performance Report Reference
13
Issue 02 (2011-08-25)
486
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
RRC Connection
Setup Success Rate
(service)
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.Emc]
+
[L.RRC.ConnReq.Succ.HighPri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoData])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri]+
[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData])*{100}
RRC Connection
Setup Success Rate
(other)[%]
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.MoSig])/
([L.RRC.ConnReq.Att.MoSig])*{100}
E-RAB Setup
Success Rate (VoIP)
none
Measuremen
t related to ERAB
establish
([L.E-RAB.SuccEst.QCI.1])/
([L.E-RAB.AttEst.QCI.1])*
{100}
487
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
E-RAB Setup
Success Rate (All)
none
Measuremen
t related to ERAB
establish
([L.E-RAB.SuccEst.QCI.1]+
[L.E-RAB.SuccEst.QCI.2]+
[L.E-RAB.SuccEst.QCI.3]+
[L.E-RAB.SuccEst.QCI.4]+
[L.E-RAB.SuccEst.QCI.5]+
[L.E-RAB.SuccEst.QCI.6]+
[L.E-RAB.SuccEst.QCI.7]+
[L.E-RAB.SuccEst.QCI.8]+
[L.E-RAB.SuccEst.QCI.9])/
([L.E-RAB.AttEst.QCI.1]+
[L.E-RAB.AttEst.QCI.2]+
[L.E-RAB.AttEst.QCI.3]+
[L.E-RAB.AttEst.QCI.4]+
[L.E-RAB.AttEst.QCI.5]+
[L.E-RAB.AttEst.QCI.6]+
[L.E-RAB.AttEst.QCI.7]+
[L.E-RAB.AttEst.QCI.8]+
[L.E-RAB.AttEst.QCI.9])*
{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
LTE
Object Type
LTE Cell
Issue 02 (2011-08-25)
488
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Integrity
DL Average
Throughput of QCI 1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.1]/
[L.Thrp.Time.DL.QCI.1]
DL Average
Throughput of QCI 2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.2]/
[L.Thrp.Time.DL.QCI.2]
DL Average
Throughput of QCI 3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.3]/
[L.Thrp.Time.DL.QCI.3]
DL Average
Throughput of QCI 4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.4]/
[L.Thrp.Time.DL.QCI.4]
DL Average
Throughput of QCI 5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.5]/
[L.Thrp.Time.DL.QCI.5]
DL Average
Throughput of QCI 6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.6]/
[L.Thrp.Time.DL.QCI.6]
DL Average
Throughput of QCI 7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.7]/
[L.Thrp.Time.DL.QCI.7]
DL Average
Throughput of QCI 8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.8]/
[L.Thrp.Time.DL.QCI.8]
DL Average
Throughput of QCI 9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.9]/
[L.Thrp.Time.DL.QCI.9]
UL Average
Throughput of QCI 1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.1]/
[L.Thrp.Time.UL.QCI.1]
UL Average
Throughput of QCI 2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.2]/
[L.Thrp.Time.UL.QCI.2]
UL Average
Throughput of QCI 3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.3]/
[L.Thrp.Time.UL.QCI.3]
UL Average
Throughput of QCI 4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.4]/
[L.Thrp.Time.UL.QCI.4]
489
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL Average
Throughput of QCI 5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.5]/
[L.Thrp.Time.UL.QCI.5]
UL Average
Throughput of QCI 6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.6]/
[L.Thrp.Time.UL.QCI.6]
UL Average
Throughput of QCI 7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.7]/
[L.Thrp.Time.UL.QCI.7]
UL Average
Throughput of QCI 8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.8]/
[L.Thrp.Time.UL.QCI.8]
UL Average
Throughput of QCI 9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.9]/
[L.Thrp.Time.UL.QCI.9]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
LTE
Object Type
LTE Cell
Issue 02 (2011-08-25)
490
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accesaib
ility
RRC Connection
Setup Success Rate
(service)
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.Emc]
+
[L.RRC.ConnReq.Succ.HighPri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoData])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri]+
[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData])*{100}
RRC Connection
Setup Success Rate
(other)[%]
none
Measuremen
t related to
RRC setup
([L.RRC.ConnReq.Succ.MoSig])/
([L.RRC.ConnReq.Att.MoSig])*{100}
E-RAB Setup
Success Rate (VoIP)
[%]
none
Measuremen
t related to ERAB
establish
([L.E-RAB.SuccEst.QCI.1]/
[L.E-RAB.AttEst.QCI.1])*
{100}
E-RAB Setup
Success Rate (ALL)
[%]
none
Measuremen
t related to ERAB
establish
([L.E-RAB.SuccEst]/[L.ERAB.AttEst])*{100}
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighPri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoData])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri]+
[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData])*{100})*(([L.ERAB.SuccEst.QCI.1]/[L.ERAB.AttEst.QCI.1])*{100})/
{100}
491
PRS
Performance Report Reference
Subrep
ort
Name
Retainabi
lity
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Service Setup
Success Rate(ALL)
[%]
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighPri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoData])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri]+
[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData])*{100})*(([L.ERAB.SuccEst]/[L.ERAB.AttEst])*{100})/{100}
none
Measuremen
t related to ERAB release
([L.E-RAB.AbnormRel.QCI.
1]/([L.E-RAB.NormRel.QCI.
1]+[L.ERAB.AbnormRel.QCI.1]))*
{100}
none
Measuremen
t related to ERAB release
([L.E-RAB.AbnormRel]/[L.ERAB.NormRel])*{100}
Call Complete
Success Rate(VoIP)
[%]
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighPri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoData])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri]+
[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData])*{100})*(([L.ERAB.SuccEst.QCI.1]/[L.ERAB.AttEst.QCI.1])*{100})*
(([L.E-RAB.AbnormRel.QCI.
1]/([L.E-RAB.NormRel.QCI.
1]+[L.ERAB.AbnormRel.QCI.1]))*
{100})/{10000}
492
PRS
Performance Report Reference
Subrep
ort
Name
Mobility
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call Complete
Success Rate(ALL)
[%]
none
Measuremen
t related to
RRC setup
(([L.RRC.ConnReq.Succ.Emc
]+
[L.RRC.ConnReq.Succ.HighPri]+
[L.RRC.ConnReq.Succ.Mt]+
[L.RRC.ConnReq.Succ.MoData])/
([L.RRC.ConnReq.Att.Emc]+
[L.RRC.ConnReq.Att.HighPri]+
[L.RRC.ConnReq.Att.Mt]+
[L.RRC.ConnReq.Att.MoData])*{100})*(([L.ERAB.SuccEst]/[L.ERAB.AttEst])*{100})*(([L.ERAB.AbnormRel]/[L.ERAB.NormRel])*{100})/
{10000}
Intra-frequency
Handover Out
Success Rate[%]
none
Measuremen
t related to
Intra eRan
HOOUT
(([L.HHO.IntraeNB.IntraFreq.
ExecSuccOut]+
[L.HHO.IntereNB.IntraFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.IntraFreq.
ExecAttOut]+
[L.HHO.IntereNB.IntraFreq.E
xecAttOut]))*{100}
Inter-frequency
Handover Out
Success Rate[%]
none
Measuremen
t related to
Intra eRan
HOOUT
(([L.HHO.IntraeNB.InterFreq.
ExecSuccOut]+
[L.HHO.IntereNB.InterFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.InterFreq.
ExecAttOut]+
[L.HHO.IntereNB.InterFreq.E
xecAttOut]))*{100}
Inter-RAT Handover
Out Success Rate
(LTE to CDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2C.ExecSuccOut]/[L.IRATHO.E2C.PrepAttOut])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to WCDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2W.ExecSuccOut]/[L.IRATHO.E2W.PrepAttOut])*{100}
493
PRS
Performance Report Reference
Subrep
ort
Name
Service
integrity
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-RAT Handover
Out Success Rate
(LTE to GERAN)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2G.ExecSuccOut]/[L.IRATHO.E2G.PrepAttOut])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to GERAN)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2T.ExecSuccOut]/[L.IRATHO.E2T.PrepAttOut])*{100}
UL Average
Throughput(Mbps)
none
Measuremen
t related to
Thruput
([L.Thrp.bits.UL.QCI.1]+
[L.Thrp.bits.UL.QCI.2]+
[L.Thrp.bits.UL.QCI.3]+
[L.Thrp.bits.UL.QCI.4]+
[L.Thrp.bits.UL.QCI.5]+
[L.Thrp.bits.UL.QCI.6]+
[L.Thrp.bits.UL.QCI.7]+
[L.Thrp.bits.UL.QCI.8]+
[L.Thrp.bits.UL.QCI.9])/
([L.Thrp.Time.UL.QCI.1]+
[L.Thrp.Time.UL.QCI.2]+
[L.Thrp.Time.UL.QCI.3]+
[L.Thrp.Time.UL.QCI.4]+
[L.Thrp.Time.UL.QCI.5]+
[L.Thrp.Time.UL.QCI.6]+
[L.Thrp.Time.UL.QCI.7]+
[L.Thrp.Time.UL.QCI.8]+
[L.Thrp.Time.UL.QCI.9])
DL Average
Throughput(Mbps)
none
Measuremen
t related to
Thruput
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
([L.Thrp.Time.UL.QCI.1]+
[L.Thrp.Time.UL.QCI.2]+
[L.Thrp.Time.UL.QCI.3]+
[L.Thrp.Time.UL.QCI.4]+
[L.Thrp.Time.UL.QCI.5]+
[L.Thrp.Time.UL.QCI.6]+
[L.Thrp.Time.UL.QCI.7]+
[L.Thrp.Time.UL.QCI.8]+
[L.Thrp.Time.UL.QCI.9])
494
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Availabil
ity
Wireless Network
Unavailable Rate
none
Measuremen
t related to
Cell
Algorithm
([L.Cell.Unavail.Dur.Sys]+
[L.Cell.Unavail.Dur.Manual])/
{GP}*{60}
Traffic
UL Trafic Volume
(Mbps)
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.1]+
[L.Thrp.bits.UL.QCI.2]+
[L.Thrp.bits.UL.QCI.3]+
[L.Thrp.bits.UL.QCI.4]+
[L.Thrp.bits.UL.QCI.5]+
[L.Thrp.bits.UL.QCI.6]+
[L.Thrp.bits.UL.QCI.7]+
[L.Thrp.bits.UL.QCI.8]+
[L.Thrp.bits.UL.QCI.9]
DL Trafic Volume
(Mbps)
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9]
L.Traffic.User.Avg
none
Measuremen
t related to
the number of
User
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
LTE
Issue 02 (2011-08-25)
495
PRS
Performance Report Reference
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Intra-frequency
Handover Out
Success Rate
none
Measuremen
t related to
Intra eRan
HOOUT
([L.HHO.IntraeNB.IntraFreq.
ExecSuccOut]+
[L.HHO.IntereNB.IntraFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.IntraFreq.
ExecAttOut]+
[L.HHO.IntereNB.IntraFreq.E
xecAttOut])*{100}
Inter-frequency
Handover Out
Success Rate
none
Measuremen
t related to
Intra eRan
HOOUT
([L.HHO.IntraeNB.InterFreq.
ExecSuccOut]+
[L.HHO.IntereNB.InterFreq.E
xecSuccOut])/
([L.HHO.IntraeNB.InterFreq.
ExecAttOut]+
[L.HHO.IntereNB.InterFreq.E
xecAttOut])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to CDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2C.ExecSuccOut])/([L.IRATHO.E2C.ExecAttOut])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to WCDMA)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2W.ExecSuccOut])/([L.IRATHO.E2W.ExecAttOut])*{100}
Inter-RAT Handover
Out Success Rate
(LTE to GSM)
none
Measuremen
t related to
IRATHOOU
T
([L.IRATHO.E2G.ExecSuccOut])/([L.IRATHO.E2G.ExecAttOut])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
496
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
none
Measuremen
t related to ERAB release
([L.E-RAB.AbnormRel.QCI.
1])/([L.ERAB.AbnormRel.QCI.1]+
[L.E-RAB.NormRel.QCI.1])*
{100}
497
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Measuremen
t related to ERAB release
((([L.ERAB.AbnormRel.QCI.1]+
[L.E-RAB.AbnormRel.QCI.2]
+[L.E-RAB.AbnormRel.QCI.
3]+[L.ERAB.AbnormRel.QCI.4]+
[L.E-RAB.AbnormRel.QCI.5]
+[L.E-RAB.AbnormRel.QCI.
6]+[L.ERAB.AbnormRel.QCI.7]+
[L.E-RAB.AbnormRel.QCI.8]
+[L.E-RAB.AbnormRel.QCI.
9])))/((([L.ERAB.AbnormRel.QCI.1]+
[L.E-RAB.AbnormRel.QCI.2]
+[L.E-RAB.AbnormRel.QCI.
3]+[L.ERAB.AbnormRel.QCI.4]+
[L.E-RAB.AbnormRel.QCI.5]
+[L.E-RAB.AbnormRel.QCI.
6]+[L.ERAB.AbnormRel.QCI.7]+
[L.E-RAB.AbnormRel.QCI.8]
+[L.E-RAB.AbnormRel.QCI.
9]+[L.E-RAB.NormRel.QCI.
1]+[L.E-RAB.NormRel.QCI.
2]+[L.E-RAB.NormRel.QCI.
3]+[L.E-RAB.NormRel.QCI.
4]+[L.E-RAB.NormRel.QCI.
5]+[L.E-RAB.NormRel.QCI.
6]+[L.E-RAB.NormRel.QCI.
7]+[L.E-RAB.NormRel.QCI.
8]+[L.E-RAB.NormRel.QCI.
9])))*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
498
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.1]
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.2]
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.3]
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.4]
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.5]
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.6]
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.7]
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.8]
499
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
Measuremen
t related to
DRB
[L.Traffic.DRB.QCI.9]
DL Traffic Volume
of QCI 1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.1]
DL Traffic Volume
of QCI 2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.2]
DL Traffic Volume
of QCI 3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.3]
DL Traffic Volume
of QCI 4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.4]
DL Traffic Volume
of QCI 5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.5]
DL Traffic Volume
of QCI 6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.6]
DL Traffic Volume
of QCI 7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.7]
DL Traffic Volume
of QCI 8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.8]
DL Traffic Volume
of QCI 9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.DL.QCI.9]
UL Traffic Volume
of QCI 1
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.1]
UL Traffic Volume
of QCI 2
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.2]
UL Traffic Volume
of QCI 3
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.3]
500
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL Traffic Volume
of QCI 4
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.4]
UL Traffic Volume
of QCI 5
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.5]
UL Traffic Volume
of QCI 6
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.6]
UL Traffic Volume
of QCI 7
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.7]
UL Traffic Volume
of QCI 8
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.8]
UL Traffic Volume
of QCI 9
none
Measuremen
t related to
Thruput
[L.Thrp.bits.UL.QCI.9]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
LTE
Issue 02 (2011-08-25)
501
PRS
Performance Report Reference
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS
Traffic
and
Energy
Consump
tion
Report
Energy Consumption
(kwh)
none
Measuremen
t related to
eNodeB
[L.Device.eNodeB.EnergyConsume]
PS Traffic(kbit)
none
Thruput
Measuremen
t Unit
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
{1000}
Total Traffic(kbit)
none
Thruput
Measuremen
t Unit
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
{1000}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
502
PRS
Performance Report Reference
NE Type
LTE
Object Type
LTE Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Energy
Efficienc
y
Indicator
Report
EE(bit/joule)
none
Thruput
Measuremen
t Unit
([L.Thrp.bits.DL.QCI.1]+
[L.Thrp.bits.DL.QCI.2]+
[L.Thrp.bits.DL.QCI.3]+
[L.Thrp.bits.DL.QCI.4]+
[L.Thrp.bits.DL.QCI.5]+
[L.Thrp.bits.DL.QCI.6]+
[L.Thrp.bits.DL.QCI.7]+
[L.Thrp.bits.DL.QCI.8]+
[L.Thrp.bits.DL.QCI.9])/
{1000}/
[L.Device.eNodeB.EnergyConsume]/{3600}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
503
PRS
Performance Report Reference
14
Issue 02 (2011-08-25)
504
PRS
Performance Report Reference
NE Type
MGW
Object Type
MGW
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MGW
NE
Number of total
received H248 bytes
numb
er
H.248 SCTP
Signaling
Link Set
Measuremen
t of the
Whole
Equipment
Number of total
received H248
messages
numb
er
H.248 SCTP
Signaling
Link Set
Measuremen
t of the
Whole
Equipment
Failed Request
Number Because of
Busy
numb
er
Statistics of
EC
Occupation
of the Whole
Equipment
Configured Number
numb
er
Statistics of
EC
Occupation
of the Whole
Equipment
505
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
506
PRS
Performance Report Reference
15
Issue 02 (2011-08-25)
507
PRS
Performance Report Reference
NE Type
MSCe
Object Type
MSCe
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number
of
Subscrib
ers
Local Subscribers
entrie
s
VLR
Subscriber
Measuremen
t
Roaming
Subscribers
entrie
s
VLR
Subscriber
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
508
PRS
Performance Report Reference
NE Type
MSCe
Object Type
Module
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Processo
r Load
CPU Usage
Measuremen
t
CPU Usage
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCe
Object Type
MTP Signaling Link
Issue 02 (2011-08-25)
509
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Load
over
Signaling
Links
MTP
Signaling
Link Traffic
Measuremen
t
Received Seizure
Ratio
MTP
Signaling
Link Traffic
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCe
Object Type
Office Direction
Issue 02 (2011-08-25)
510
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Load
over
Trunk
Circuits
Erl
Incoming
Office
Measuremen
t Based on
Office
Direction
Erl
Outgoing
Office
Measuremen
t Based on
Office
Direction
Trunk Outgoing
Overflows
times
Outgoing
Office
Measuremen
t Based on
Office
Direction
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCe
Object Type
MSCe
Issue 02 (2011-08-25)
511
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Basic
Telecom
ServiceS
pecific
KPI
MOC TCH
Assignment
Requests
times
Assignment
Procedure
Measuremen
t
MTC TCH
Assignment
Requests
times
Assignment
Procedure
Measuremen
t
Assignment Success
Ratio(%)
Assignment
Procedure
Measuremen
t
Pagings
times
MTC
Completion
Measuremen
t
MTC
Completion
Measuremen
t
[Paging Responses]/[Pagings]
*{100}
times
Originating
Traffic
Measuremen
t
Call Attempts(IEX)
times
Incoming
Traffic
Measuremen
t
Call Completion
Ratio(%)
Originating
Traffic
Measuremen
t
([Calls Connected(ORG)]+
[Calls Connected(IEX)])/
([Call Attempts (ORG)]+[Call
Attempts(IEX)])*{100}
Calls Connected
(ORG)
times
Originating
Traffic
Measuremen
t
512
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Calls Connected
(IEX)
times
Incoming
Traffic
Measuremen
t
Originating
Traffic
Measuremen
t
([Calls Answered(ORG)]+
[Calls Answered(IEX)])/
([Calls Connected(ORG)]+
[Calls Connected(IEX)])*
{100}
Answered Traffic
(IEX)
Erl
Incoming
Traffic
Measuremen
t
Answered Traffic
(ORG)
Erl
Originating
Traffic
Measuremen
t
Answered Traffic
(erl)
Erl
Originating
Traffic
Measuremen
t
[Answered Traffic(ORG)]+
[Answered Traffic(IEX)]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCe
Issue 02 (2011-08-25)
513
PRS
Performance Report Reference
Object Type
MSCe
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
ServiceS
pecific
KPI
MO Short Message
Submission
Attempts
times
Short
Message
Service
Measuremen
t
SMS Origination
Success Ratio(%)
Short
Message
Service
Measuremen
t
MT Short Message
Submission
Attempts
times
Short
Message
Service
Measuremen
t
SMS Termination
Success Ratio(%)
Short
Message
Service
Measuremen
t
Originating Calls
times
PDSN
Traffic
Measuremen
t
PDSN Origination
Success Ratio(%)
PDSN
Traffic
Measuremen
t
Call Termination
times
PDSN
Traffic
Measuremen
t
PDSN Termination
Success Ratio(%)
PDSN
Traffic
Measuremen
t
514
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCe
Object Type
MSCe
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Manage
mentSpe
cific KPI
Location Update
Requests
times
Location
Management
Service
Measuremen
t
Location Update
Success Ratio(%)
Location
Management
Service
Measuremen
t
Authentication
Attempts
times
Authenticati
on Service
Measuremen
t
Authentication
Success Ratio(%)
Authenticati
on Service
Measuremen
t
[Successful Authentications]/
[Authentication Attempts]*
{100}
515
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Handoff Success
Ratio(%)
Handoff
Measuremen
t
Intra-MSC Hard
Handoff Requests
times
Handoff
Measuremen
t
Intra-office Handoff
Success Ratio(%)
Handoff
Measuremen
t
Successful Incoming
Handoff Back
times
Inter-Office
Handoff
Measuremen
t
Incoming Handoff
Back Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Incoming
Handoff Forward
times
Inter-Office
Handoff
Measuremen
t
Incoming Handoff
Forward Requests
times
Inter-Office
Handoff
Measuremen
t
516
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Successful Incoming
Handoff to Third
times
Inter-Office
Handoff
Measuremen
t
Incoming Handoff to
Third Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Outgoing
Handoff Back
times
Inter-Office
Handoff
Measuremen
t
Outgoing Handoff
Back Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Outgoing
Handoff Forward
times
Inter-Office
Handoff
Measuremen
t
Outgoing Handoff
Forward Requests
times
Inter-Office
Handoff
Measuremen
t
Successful Outgoing
Handoff to Third
times
Inter-Office
Handoff
Measuremen
t
Outgoing Handoff to
Third Requests
times
Inter-Office
Handoff
Measuremen
t
517
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Inter-office Handoff
Success Ratio(%)
Inter-Office
Handoff
Measuremen
t
([Successful Incoming
Handoff Back]+[Successful
Incoming Handoff Forward]+
[Successful Incoming Handoff
to Third]+[Successful
Outgoing Handoff Back]+
[Successful Outgoing Handoff
Forward]+[Successful
Outgoing Handoff to Third])/
([Incoming Handoff Back
Requests]+[Incoming Handoff
Forward Requests]+[Incoming
Handoff to Third Requests]+
[Outgoing Handoff Back
Requests]+[Outgoing Handoff
Forward Requests]+[Outgoing
Handoff to Third Requests])*
{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
518
PRS
Performance Report Reference
16
Issue 02 (2011-08-25)
519
PRS
Performance Report Reference
NE Type
MSCServer
Object Type
BICCLink
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BICC
SCTP
Link
Number of Sent
Message Packets
entrie
s
Traffic over
BICC SCTP
Links
Number of Received
Message Packets
entrie
s
Traffic over
BICC SCTP
Links
Bytes of Message
Sent(MB)
MB
Traffic over
BICC SCTP
Links
Bytes of Message
Received(MB)
MB
Traffic over
BICC SCTP
Links
Congestion Times
times
Traffic over
BICC SCTP
Links
Congestion Duration
Traffic over
BICC SCTP
Links
Unavailable Times
times
Traffic over
BICC SCTP
Links
520
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavailable
Duration
Traffic over
BICC SCTP
Links
Flow of Link(MB)
MB
Traffic over
BICC SCTP
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
BICC SCTP
Links
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
H248Link
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
H248
SCTP
Link
Number of Sent
Messages
times
Traffic over
H.248 SCTP
Links
521
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Received
Messages
times
Traffic over
H.248 SCTP
Links
Bytes of Message
Sent(MB)
MB
Traffic over
H.248 SCTP
Links
Bytes of Message
Received(MB)
MB
Traffic over
H.248 SCTP
Links
Congestion Times
times
Traffic over
H.248 SCTP
Links
Congestion Duration
Traffic over
H.248 SCTP
Links
Unavailable Times
times
Traffic over
H.248 SCTP
Links
Unavailable
Duration
Traffic over
H.248 SCTP
Links
Flow of Link(MB)
MB
Traffic over
H.248 SCTP
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
H.248 SCTP
Links
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
522
PRS
Performance Report Reference
NE Type
MSCServer
Object Type
M2UALink
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M2UA
Link
Number of Sent
MAUP Messages
entrie
s
Traffic over
M2UA
Signaling
Links
Number of Received
MAUP Messages
entrie
s
Traffic over
M2UA
Signaling
Links
Bytes of Message
Sent(MB)
MB
Traffic over
M2UA
Signaling
Links
Bytes of Message
Received(MB)
MB
Traffic over
M2UA
Signaling
Links
Congestion Times
times
Traffic over
M2UA
Signaling
Links
Congestion Duration
Traffic over
M2UA
Signaling
Links
Unavailable Times
times
Traffic over
M2UA
Signaling
Links
523
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavailable
Duration
Traffic over
M2UA
Signaling
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
M2UA
Signaling
Links
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
M3UALink
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Number of Messages
Sent
entrie
s
Traffic over
M3UA
Signaling
Links
524
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Messages
Received
entrie
s
Traffic over
M3UA
Signaling
Links
Bytes of Message
Sent(MB)
MB
Traffic over
M3UA
Signaling
Links
Bytes of Message
Received(MB)
MB
Traffic over
M3UA
Signaling
Links
Congestion Times
times
Traffic over
M3UA
Signaling
Links
Congestion Duration
Traffic over
M3UA
Signaling
Links
Unavailable Times
times
Traffic over
M3UA
Signaling
Links
Unavailable
Duration
Traffic over
M3UA
Signaling
Links
Flow of Link(MB)
MB
Traffic over
M3UA
Signaling
Links
Average Load of
Link(kbps)
kbit/s
Traffic over
M3UA
Signaling
Links
525
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
MTP3BLink
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MTP3B
Link
times
MTP3B
Signaling
Link
Measuremen
t
byte
MTP3B
Signaling
Link
Measuremen
t
times
MTP3B
Signaling
Link
Measuremen
t
Link Received
SIFSIO Octets
byte
MTP3B
Signaling
Link
Measuremen
t
526
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Link Congestion
Times
times
MTP3B
Signaling
Link
Measuremen
t
Link Congestion
Duration
MTP3B
Signaling
Link
Measuremen
t
MTP3B
Signaling
Link
Measuremen
t
MTP3B
Signaling
Link
Measuremen
t
MTP3B
Signaling
Link
Measuremen
t
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Issue 02 (2011-08-25)
527
PRS
Performance Report Reference
Object Type
MTPLink
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MTP3
Link
Signal Units of
Messages Sent
entrie
s
Traffic over
MTP
Signaling
Links
Bytes of Sent
Messages
entrie
s
Traffic over
MTP
Signaling
Links
Signal Units of
Messages Received
entrie
s
Traffic over
MTP
Signaling
Links
Bytes of Received
Messages
entrie
s
Traffic over
MTP
Signaling
Links
Congestion Times
times
Traffic over
MTP
Signaling
Links
Congestion Duration
Traffic over
MTP
Signaling
Links
Unavailable
Duration
Traffic over
MTP
Signaling
Links
Traffic over
MTP
Signaling
Links
Receive Seizure
Ratio
Traffic over
MTP
Signaling
Links
528
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
Module
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CPU
Load
Originated Call
Times
times
CPU Usage
Terminated Call
Times
times
CPU Usage
Congestion Times
times
CPU Usage
Congestion Duration
CPU Usage
Overload Times
times
CPU Usage
Overload Duration
CPU Usage
Average Seizure
Rate
CPU Usage
CPU Usage
Peak Seizure
Duration
CPU Usage
529
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BHCA
none
CPU Usage
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
MSCServer
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Device
capabilit
y
Number of VLR
Registered
Subscriber
none
Number of
VLR
Subscribers
Number of Local
Subscribers in VLR
entrie
s
Number of
VLR
Subscribers
Number of Roaming
Subscribers in VLR
entrie
s
Number of
VLR
Subscribers
530
PRS
Performance Report Reference
Subrep
ort
Name
2G MO
Call
2G MT
Call
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of VLR
Power-on Subscriber
none
Number of
VLR
Subscribers
MO Connected Rate
GSM
Subscriber
Originated
Calls
MO Answer Rate
GSM
Subscriber
Originated
Calls
[Answer Times]/[Call
Attempts]*{100}
Seizure Traffic
Erl
GSM
Subscriber
Originated
Calls
Call Completion
Traffic
Erl
GSM
Subscriber
Originated
Calls
Answer Traffic
Erl
GSM
Subscriber
Originated
Calls
Call Attempts
times
GSM
Subscriber
Originated
Calls
Call Completion
Times
times
GSM
Subscriber
Originated
Calls
Answer Times
times
GSM
Subscriber
Originated
Calls
MT Connected Rate
GSM
Subscriber
Terminated
Calls
531
PRS
Performance Report Reference
Subrep
ort
Name
3G MO
Call
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
MT Answer Rate
GSM
Subscriber
Terminated
Calls
[2G TERMINATED
ANSWER]/[2G
TERMINATED CALL
ATTEMPT]*{100}
2G TERMINATED
SEIZE USAGE
Erl
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ALERT USAGE
Erl
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ANSWER USAGE
Erl
GSM
Subscriber
Terminated
Calls
2G TERMINATED
CALL ATTEMPT
times
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ALERT
times
GSM
Subscriber
Terminated
Calls
2G TERMINATED
ANSWER
times
GSM
Subscriber
Terminated
Calls
MO Connected Rate
UTRAN
Subscriber
Originated
Calls
MO Answer Rate
UTRAN
Subscriber
Originated
Calls
[Answer Times]/[Call
Attempts]*{100}
Seizure Traffic
Erl
UTRAN
Subscriber
Originated
Calls
532
PRS
Performance Report Reference
Subrep
ort
Name
3G MT
Call
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call Completion
Traffic
Erl
UTRAN
Subscriber
Originated
Calls
Answer Traffic
Erl
UTRAN
Subscriber
Originated
Calls
Call Attempts
times
UTRAN
Subscriber
Originated
Calls
Call Completion
Times
times
UTRAN
Subscriber
Originated
Calls
Answer Times
times
UTRAN
Subscriber
Originated
Calls
MT Connected Rate
UTRAN
Subscriber
Terminated
Calls
MT Answer Rate
UTRAN
Subscriber
Terminated
Calls
[3G TERMINATED
ANSWER]/[3G
TERMINATED
CALL_ATTEMPT]*{100}
3G TERMINATED
SEIZE USAGE
Erl
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ALERT USAGE
Erl
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ANSWER USAGE
Erl
UTRAN
Subscriber
Terminated
Calls
533
PRS
Performance Report Reference
Subrep
ort
Name
Other
Call
SMS
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
3G TERMINATED
CALL_ATTEMPT
times
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ALERT
times
UTRAN
Subscriber
Terminated
Calls
3G TERMINATED
ANSWER
times
UTRAN
Subscriber
Terminated
Calls
Incoming Connected
Ratio
Incoming
Calls
Call Completion
Traffic
Erl
Incoming
Calls
Seizure Times
times
Incoming
Calls
Outgoing Connected
Ratio
Outgoing
Calls
Call Completion
Traffic
Erl
Outgoing
Calls
Seizure Attempts
times
Outgoing
Calls
ALERTING
TRAFFIC
Erl
Transit Calls
MO SMS Success
Ratio
MSC Basic
Services
MT SMS Success
Ratio
MSC Basic
Services
times
MSC Basic
Services
Receive SMMT
Times
times
MSC Basic
Services
534
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
Trunk Group
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Incoming
Seizure Times
times
Incoming
Calls through
Trunk
Groups
Call Completion
Times
times
Incoming
Calls through
Trunk
Groups
Answer Times
times
Incoming
Calls through
Trunk
Groups
Number of Installed
Circuits
piece
Incoming
Calls through
Trunk
Groups
535
PRS
Performance Report Reference
Subrep
ort
Name
Outgoing
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Number of Available
Circuits
piece
Incoming
Calls through
Trunk
Groups
Seizure Traffic
Erl
Incoming
Calls through
Trunk
Groups
Call Completion
Traffic
Erl
Incoming
Calls through
Trunk
Groups
Answer Traffic
Erl
Incoming
Calls through
Trunk
Groups
Incoming
Calls through
Trunk
Groups
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
Erl
Incoming
Calls through
Trunk
Groups
[Seizure Traffic]/[Number of
Available Circuits]
Seizure Attempts
times
Outgoing
Calls through
Trunk
Groups
Seizure Times
times
Outgoing
Calls through
Trunk
Groups
Call Completion
Times
times
Outgoing
Calls through
Trunk
Groups
Answer Times
times
Outgoing
Calls through
Trunk
Groups
536
PRS
Performance Report Reference
Subrep
ort
Name
Total
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
times
Outgoing
Calls through
Trunk
Groups
Number of Installed
Circuits
piece
Outgoing
Calls through
Trunk
Groups
Number of Available
Circuits
piece
Outgoing
Calls through
Trunk
Groups
Seizure Traffic
Erl
Outgoing
Calls through
Trunk
Groups
Call Completion
Traffic
Erl
Outgoing
Calls through
Trunk
Groups
Answer Traffic
Erl
Outgoing
Calls through
Trunk
Groups
Outgoing
Calls through
Trunk
Groups
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
Erl
Outgoing
Calls through
Trunk
Groups
[Seizure Traffic]/[Number of
Available Circuits]
Total Traffic
Erl
Incoming
Calls through
Trunk
Groups
[Seizure Traffic]+[Seizure
Traffic]
Erl
Incoming
Calls through
Trunk
Groups
[Seizure Traffic]/[Number of
Available Circuits]+[Seizure
Traffic]/[Number of Available
Circuits]
537
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
Office Direction
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Incoming
Number of Installed
Circuits
piece
Incoming
Calls in
Mobile
Office
Directions
Number of Available
Circuits
piece
Incoming
Calls in
Mobile
Office
Directions
Seizure Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
Call Completion
Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
538
PRS
Performance Report Reference
Subrep
ort
Name
Outgoing
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Answer Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
Connected Ratio
Incoming
Calls in
Mobile
Office
Directions
Answer Ratio
Incoming
Calls in
Mobile
Office
Directions
[Answer Times]/[Seizure
Times]*{100}
Seizure Times
times
Incoming
Calls in
Mobile
Office
Directions
TK Avail Ratio
Incoming
Calls in
Mobile
Office
Directions
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
Erl
Incoming
Calls in
Mobile
Office
Directions
[Seizure Traffic]/[Number of
Available Circuits]
Number of Installed
Circuits
piece
Outgoing
Calls in
Mobile
Office
Directions
Number of Available
Circuits
piece
Outgoing
Calls in
Mobile
Office
Directions
539
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Seizure Traffic
Erl
Outgoing
Calls in
Mobile
Office
Directions
Call Completion
Traffic
Erl
Outgoing
Calls in
Mobile
Office
Directions
Answer Traffic
Erl
Outgoing
Calls in
Mobile
Office
Directions
Seizure Ratio
Outgoing
Calls in
Mobile
Office
Directions
[Seizure Times]/[Seizure
Attempts]*{100}
Connected Ratio
Outgoing
Calls in
Mobile
Office
Directions
Answer Ratio
Outgoing
Calls in
Mobile
Office
Directions
[Answer Times]/[Seizure
Attempts]*{100}
Seizure Attempts
times
Outgoing
Calls in
Mobile
Office
Directions
TK Avail Ratio
Outgoing
Calls in
Mobile
Office
Directions
[Number of Available
Circuits]/[Number of Installed
Circuits]*{100}
540
PRS
Performance Report Reference
Subrep
ort
Name
Total
Counter
Coun
ter
Unit
Function
Subset
Formula
Erl
Outgoing
Calls in
Mobile
Office
Directions
[Seizure Traffic]/[Number of
Available Circuits]
Total Traffic
Erl
Incoming
Calls in
Mobile
Office
Directions
[Seizure Traffic]+[Seizure
Traffic]
Erl
Incoming
Calls in
Mobile
Office
Directions
[Seizure Traffic]/[Number of
Available Circuits]+[Seizure
Traffic]/[Number of Available
Circuits]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
MSCServer
Object Type
MSCServer
Issue 02 (2011-08-25)
541
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Handove
r
Basic Outgoing
Handover Requests
times
Local MSC
Handover
Assign
GSM
Assignment
Assign Request
Times
times
GSM
Assignment
MSC Basic
Services
Paging Times
times
MSC Basic
Services
Location Update
Success Rate
Location
Management
Service
Location Update
Requests
times
Location
Management
Service
Authentication
Success Rate
Authenticati
on
AUTH Requests
times
Authenticati
on
MSC Basic
Services
times
MSC Basic
Services
Paging
Location
Update
Authenti
cation
and
Cipher
Issue 02 (2011-08-25)
542
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
543
PRS
Performance Report Reference
17
Issue 02 (2011-08-25)
544
PRS
Performance Report Reference
NE Type
NodeB
Object Type
Local Cell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NodeB
Report
VS.HSUPA.LoadOutput.0
times
HSUPA
measurement
s per local
cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
NodeB
Issue 02 (2011-08-25)
545
PRS
Performance Report Reference
Object Type
NodeB
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
BTS
Traffic
and
Energy
Consump
tion
Report
CS Traffic(Erl)
none
Measuremen
t related to
throughput
per cell
[VS.AMR.Erlang.BestCell]
PS Traffic(kbit)
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]+
[VS.PS.Bkg.DL.16.Thruput]+
[VS.PS.Bkg.DL.32.Thruput]+
[VS.PS.Bkg.DL.64.Thruput]+
[VS.PS.Bkg.DL.128.Thruput]
+[VS.PS.Bkg.DL.
144.Thruput]+
[VS.PS.Bkg.DL.256.Thruput]
+[VS.PS.Bkg.DL.
384.Thruput]+
[VS.DcchSrbKbps.Dl.Thruput]+
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}+
[VS.CS.Conv.DL.
64.Thruput])/{1000}
546
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Total Traffic(kbit)
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]+
[VS.PS.Bkg.DL.16.Thruput]+
[VS.PS.Bkg.DL.32.Thruput]+
[VS.PS.Bkg.DL.64.Thruput]+
[VS.PS.Bkg.DL.128.Thruput]
+[VS.PS.Bkg.DL.
144.Thruput]+
[VS.PS.Bkg.DL.256.Thruput]
+[VS.PS.Bkg.DL.
384.Thruput]+
[VS.DcchSrbKbps.Dl.Thruput]+
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}+
[VS.CS.Conv.DL.
64.Thruput])/{1000}+
(([VS.AMR.Ctrl.DL12.2]*
{12.2}+[VS.RB.AMR.DL.
10.2]*{10.2}+
[VS.RB.AMR.DL.7.95]*
{7.95}+[VS.RB.AMR.DL.
7.4]*{7.4}+
[VS.RB.AMR.DL.6.7]*{6.7}
+[VS.RB.AMR.DL.5.9]*
{5.9}+[VS.RB.AMR.DL.
5.15]*{5.15}+
[VS.RB.AMR.DL.4.75]*
{4.75})*{0.5})
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
NodeB
Issue 02 (2011-08-25)
547
PRS
Performance Report Reference
Object Type
NodeB
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Network
Energy
Efficienc
y
Indicator
Report
EE(bit/joule)
none
Measuremen
t related to
throughput
per cell
(([VS.PS.Bkg.DL.8.Thruput]+
[VS.PS.Bkg.DL.16.Thruput]+
[VS.PS.Bkg.DL.32.Thruput]+
[VS.PS.Bkg.DL.64.Thruput]+
[VS.PS.Bkg.DL.128.Thruput]
+[VS.PS.Bkg.DL.
144.Thruput]+
[VS.PS.Bkg.DL.256.Thruput]
+[VS.PS.Bkg.DL.
384.Thruput]+
[VS.DcchSrbKbps.Dl.Thruput]+
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}+
[VS.CS.Conv.DL.
64.Thruput])/{1000}+
(([VS.AMR.Ctrl.DL12.2]*
{12.2}+[VS.RB.AMR.DL.
10.2]*{10.2}+
[VS.RB.AMR.DL.7.95]*
{7.95}+[VS.RB.AMR.DL.
7.4]*{7.4}+
[VS.RB.AMR.DL.6.7]*{6.7}
+[VS.RB.AMR.DL.5.9]*
{5.9}+[VS.RB.AMR.DL.
5.15]*{5.15}+
[VS.RB.AMR.DL.4.75]*
{4.75})*{0.5}))/
[VS.BTS.EnergyCons.Adding]/{3600}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
548
PRS
Performance Report Reference
18
Issue 02 (2011-08-25)
549
PRS
Performance Report Reference
NE Type
PCU
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Uplink TBF
establishmen
t/release
measurement
Downlink GPRS
TBF Drop Rate(%)
Downlink
TBF
establishmen
t/release
measurement
Uplink
EGPRS TBF
establishmen
t/release
measurement
Downlink EGPRS
TBF Drop Rate(%)
Downlink
EGPRS TBF
establishmen
t/release
measurement
550
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
PCU
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Transmis
son
Retransmission Rate
of RLC Uplink Data
Block (%)
Uplink RLC
data
transmission
measurement
551
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of RLC Downlink
Data Block (%)
Downlink
RLC data
transmission
measurement
({1}-(([Number of downlink
RLC data blocks using CS1]*
({1}-[Retransmission rate of
RLC downlink data block
using CS1(%)]/{100}))+
([Number of downlink RLC
data blocks using CS2]*({1}[Retransmission rate of RLC
downlink data block using CS2
(%)]/{100}))+([Number of
downlink RLC data blocks
using CS3]*({1}[Retransmission rate of RLC
downlink data block using CS3
(%)]/{100}))+([Number of
downlink RLC data blocks
using CS4]*({1}[Retransmission rate of RLC
downlink data block using CS4
(%)]/{100})))/[Total number
of downlink RLC data blocks])
*{100}
552
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Uplink EGPRS
RLC Data Block (%)
Uplink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
({1}-(([Number of uplink
EGPRS RLC data blocks using
MCS1]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS1(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS2]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS2(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS3]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS3(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS4]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS4(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS5]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS5(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS6]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS6(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS7]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS7(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS8]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS8(%)]/
{100}))+([Number of uplink
EGPRS RLC data blocks using
MCS9]*({1}-[Retransmission
rate of uplink EGPRS RLC data
block using MCS9(%)]/
{100})))/[Total number of
uplink EGPRS RLC data
blocks])*{100}
553
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Retransmission Rate
of Downlink EGPRS
RLC Data Block (%)
Downlink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
({1}-(([Number of downlink
EGPRS RLC data blocks using
MCS1]*({1}-[Retransmission
rate of downlink EGPRS RLC
data block using MCS1(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS2]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS2(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS4]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS4(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS4]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS4(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS5]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS5(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS6]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS6(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS7]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS7(%)]/
{100}))+([Number of
downlink EGPRS RLC data
blocks using MCS8]*({1}[Retransmission rate of
downlink EGPRS RLC data
block using MCS8(%)]/
{100}))+([Number of
554
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
PCU
Object Type
Cell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
Uplink Assignment
Success Rate(%)
Uplink TBF
establishmen
t/release
measurement
555
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Downlink
Assignment Success
Rate(%)
Downlink
TBF
establishmen
t/release
measurement
([Number of successful
downlink TBF establishment]/
[Number of downlink TBF
establishment attempts])*
{100}
Mean Inter-arrival
Time of Packet
Access Requests on
CCCH(s)
Packet access
performance
measurement
on CCCH
{GP}*{60}/[Number of packet
channel requests received on
CCCH]
Uplink TBF
establishmen
t/release
measurement
Downlink GPRS
TBF Congestion
Rate(%)
Downlink
TBF
establishmen
t/release
measurement
Uplink
EGPRS TBF
establishmen
t/release
measurement
Downlink GPRS
TBF Congestion
Rate(%)
Downlink
EGPRS TBF
establishmen
t/release
measurement
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
556
PRS
Performance Report Reference
NE Type
PCU
Object Type
PCU
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
Through
put
kilobi
ts
Uplink RLC
data
transmission
measurement
Downlink RLC
Payload( kbits )
kilobi
ts
Downlink
RLC data
transmission
measurement
557
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Uplink EDGPRS
RLC Payload( kbits )
kilobi
ts
Uplink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
Downlink EDGPRS
RLC Payload( kbits )
kilobi
ts
Downlink
GMSK
EGPRS RLC
data
retransmissio
n rate
measurement
558
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Mean Payload
(kbytes) of the
Downlink Data at the
LLC Layer
kiloby
tes
Uplink LLC
data
transmission
measurement
Mean Payload
(kbytes) of the
Uplink Data at the
LLC Layer
kiloby
tes
Downlink
LLC data
transmission
measurement
Mean Downlink
NS_PDUs
Throughput(kbits/s)
kbit/s
NS
transmission
performance
measurement
559
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Uplink RLC
data
transmission
measurement
560
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
PCU
Object Type
Cell
Issue 02 (2011-08-25)
561
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Availabil
ity
Uplink PDTCH/
PACCH Utilization
Rate(%)
Cell radio
channel
performance
measurement
Downlink PDTCH/
PACCH Utilization
Rate(%)
Cell radio
channel
performance
measurement
PDCH Occupation
Rate(%)
PDCH
resource
performance
measurement
Pre-empted Dynamic
PDCH Carrying
Packet Traffic
Reclaimed Success
Rate(%)
PDCH
resource
performance
measurement
[Number of pre-empted
PDCHs carrying packet traffic]
*{100}/[Number of dynamic
PDCHs reclaimed by BSC]
PDCH Allocation
Success Rate(%)
Uplink TBF
establishmen
t/release
measurement
kbit/s
PDCH
resource
performance
measurement
kbit/s
PDCH
resource
performance
measurement
562
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
563
PRS
Performance Report Reference
19
Issue 02 (2011-08-25)
564
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
CS Erlang
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
565
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Connection Setup
Success Rate(CS)
RRC
connection
setup
measurement
per RNC
(([VS.RRC.SuccConnEstab.O
rgConv]+
[VS.RRC.SuccConnEstab.Org
Subs]+
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Res
t]+
[VS.RRC.SuccConnEstab.Em
g]+
[VS.RRC.SuccConnEstab.Unknown])*
(([RAB.SuccEstabCSNoQueui
ng.Conv]+
[RAB.SuccEstabCSNoQueuin
g.Strm]+
[RAB.SuccEstabCSQueuing.
Conv]+
[RAB.SuccEstabCSQueuing.S
trm])))/
((([VS.RRC.AttConnEstab.Or
gConv]+
[VS.RRC.AttConnEstab.OrgSubs]+
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.Rest]
+
[VS.RRC.AttConnEstab.Emg]
+[VS.RRC.AttConnEstab.Unknown]))*
([RAB.AttEstabCS.Conv]))*
{100}
Drop Rate(CS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC])/
([RAB.SuccEstabCSNoQueui
ng.Conv]+
[RAB.SuccEstabCSNoQueuin
g.Strm]+
[RAB.SuccEstabCSQueuing.
Conv]+
[RAB.SuccEstabCSQueuing.S
trm])*{100}
566
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Erlang
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]+
[VS.PSLoad.DLThruput.RNC
]
567
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC Connection
Setup Success Rate
(PS)
RRC
connection
setup
measurement
per RNC
((([VS.RRC.SuccConnEstab.
OrgInt]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]+
[VS.RRC.SuccConnEstab.Org
HPSi]+
[VS.RRC.SuccConnEstab.Tm
HPSi])*
([VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]+
[VS.RRC.AttConnEstab.OrgH
PSig]+
[VS.RRC.AttConnEstab.TmH
PSig])))/
(([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSNoQueuin
g.Strm]+
[RAB.SuccEstabPSNoQueuin
g.Intact]+
[RAB.SuccEstabPSNoQueuin
g.Bgrd]+
[RAB.SuccEstabPSNoQueuin
g.Conv]+
[RAB.SuccEstabPSQueuing.S
trm]+
[RAB.SuccEstabPSQueuing.I
ntact]+
[RAB.SuccEstabPSQueuing.B
grd])*
([VS.RAB.AttEstabPS.Conv]
+[RAB.AttEstabPS.Strm]+
[RAB.AttEstabPS.Intact]+
[RAB.AttEstabPS.Bgrd]))*
{100}
568
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Drop Rate(PS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.PS.Abnorm.R
NC]+
[VS.RAB.Loss.PS.RF.RNC])/
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSNoQueuin
g.Strm]+
[RAB.SuccEstabPSNoQueuin
g.Intact]+
[RAB.SuccEstabPSNoQueuin
g.Bgrd]+
[RAB.SuccEstabPSQueuing.C
onv]+
[RAB.SuccEstabPSQueuing.S
trm]+
[RAB.SuccEstabPSQueuing.I
ntact]+
[RAB.SuccEstabPSQueuing.B
grd])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
569
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Cell
Performa
nce
Measure
ment
CS Erlang
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
Connection Setup
Success Rate(CS)
RRC
connection
setup
measurement
per RNC
(([VS.RRC.SuccConnEstab.O
rgConv]+
[VS.RRC.SuccConnEstab.Org
Subs]+
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Res
t]+
[VS.RRC.SuccConnEstab.Em
g]+
[VS.RRC.SuccConnEstab.Unknown])*
(([RAB.SuccEstabCSNoQueui
ng.Conv]+
[RAB.SuccEstabCSNoQueuin
g.Strm]+
[RAB.SuccEstabCSQueuing.
Conv]+
[RAB.SuccEstabCSQueuing.S
trm])))/
((([VS.RRC.AttConnEstab.Or
gConv]+
[VS.RRC.AttConnEstab.OrgSubs]+
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.Rest]
+
[VS.RRC.AttConnEstab.Emg]
+[VS.RRC.AttConnEstab.Unknown]))*
([RAB.AttEstabCS.Conv]))*
{100}
570
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Drop Rate(CS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC])/
([RAB.SuccEstabCSNoQueui
ng.Conv]+
[RAB.SuccEstabCSNoQueuin
g.Strm]+
[RAB.SuccEstabCSQueuing.
Conv]+
[RAB.SuccEstabCSQueuing.S
trm])*{100}
PS Erlang
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]+
[VS.PSLoad.DLThruput.RNC
]
571
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC Connection
Setup Success Rate
(PS)
RRC
connection
setup
measurement
per RNC
((([VS.RRC.SuccConnEstab.
OrgInt]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]+
[VS.RRC.SuccConnEstab.Org
HPSi]+
[VS.RRC.SuccConnEstab.Tm
HPSi])*
([VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]+
[VS.RRC.AttConnEstab.OrgH
PSig]+
[VS.RRC.AttConnEstab.TmH
PSig])))/
(([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSNoQueuin
g.Strm]+
[RAB.SuccEstabPSNoQueuin
g.Intact]+
[RAB.SuccEstabPSNoQueuin
g.Bgrd]+
[RAB.SuccEstabPSNoQueuin
g.Conv]+
[RAB.SuccEstabPSQueuing.S
trm]+
[RAB.SuccEstabPSQueuing.I
ntact]+
[RAB.SuccEstabPSQueuing.B
grd])*
([VS.RAB.AttEstabPS.Conv]
+[RAB.AttEstabPS.Strm]+
[RAB.AttEstabPS.Intact]+
[RAB.AttEstabPS.Bgrd]))*
{100}
572
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Drop Rate(PS)
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.PS.Abnorm.R
NC]+
[VS.RAB.Loss.PS.RF.RNC])/
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSNoQueuin
g.Strm]+
[RAB.SuccEstabPSNoQueuin
g.Intact]+
[RAB.SuccEstabPSNoQueuin
g.Bgrd]+
[RAB.SuccEstabPSQueuing.C
onv]+
[RAB.SuccEstabPSQueuing.S
trm]+
[RAB.SuccEstabPSQueuing.I
ntact]+
[RAB.SuccEstabPSQueuing.B
grd])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
573
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High Call
Drop
Rate Cell
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.RF])/
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm])*
{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
574
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
High Call
Drop
Rate Cell
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.RF])/
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm])*
{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
575
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
No
Services
Cell
RABSetupSucc
(Cell)
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])/
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])*
{100})+
(([VS.RAB.SuccEstabPS.Con
v]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100})
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
576
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
No
Services
Cell
RABSetupSucc
(Cell)
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])/
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])*
{100})+
(([VS.RAB.SuccEstabPS.Con
v]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100})
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
577
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Page
HS-DSCH to DCH
Handover Success
Rate(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100}
DCH to HS-DSCH
Handover Success
Rate(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100}
HS-DSCH Service
Cell Change Success
Rate(with Intra
HHO)(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100}
HS-DSCH Service
Cell Change Success
Rate(with Inter
HHO)(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100}
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/([VS.HSDPA.RAB.AttEstab]*[VS.HSDPA.RAB.AttEstab])*{100}
HS-DSCH Service
Cell Change Success
Rate with SHO
(HSDPA to HSDPA)
(>95%)
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
578
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Volume
Measure
ment
CS Erlang
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
PS Erlang
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]+
[VS.PSLoad.DLThruput.RNC
]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
579
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL
Interfere
nce Cell
VS.MinRTWP
Cell TX and
RX Power
Measuremen
t per cell
[VS.MinRTWP]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
UL
Interfere
nce Cell
VS.MinRTWP
Cell TX and
RX Power
Measuremen
t per cell
[VS.MinRTWP]
580
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavaila
ble Cell
VS.Cell.UnavailTim
e.OM
Measuremen
t related to
Algorithm
per cell
[VS.Cell.UnavailTime.OM]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
581
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Unavaila
ble Cell
VS.Cell.UnavailTim
e.OM
Measuremen
t related to
Algorithm
per cell
[VS.Cell.UnavailTime.OM]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
582
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
(Morning
Busy
Time)
VS Setup Success
Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100}
VS RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Norm][VS.RAB.Loss.CS.Norm.AM
R]+
[VS.RAB.Loss.CS.Conv64K])
*{100}
VS.Filter Condtion
(Worst Cell)
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100})+({4}*
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100}))
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
583
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Worst
Cell
(Night
Busy
Time)
VS Setup Success
Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100}
VS RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Norm][VS.RAB.Loss.CS.Norm.AM
R]+
[VS.RAB.Loss.CS.Conv64K])
*{100}
VS.Filter Condtion
(Worst Cell)
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100})+({4}*
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100}))
584
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
585
PRS
Performance Report Reference
20
Issue 02 (2011-08-25)
586
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
587
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
Radio Access
Success Ratio
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter-
588
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100})*
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
/
(([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])+
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
RRC Setup Success
Ratio(other)
Issue 02 (2011-08-25)
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
*{100}
589
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
590
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100}
Issue 02 (2011-08-25)
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100}
VP RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
PS RAB Setup
Success Ratio
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100}
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100}
591
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Soft Handover
Success Ratio(Cell)
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*
{100}
HS-DSCH Service
Cell Change Success
Ratio with SHO
(HSDPA to HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100}
Inter-frequency Hard
Handover Success
Ratio (HSDPA to
HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100}
CS Inter-RAT
Handover Success
Ratio (WCDMA to
GSM)(Cell)
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*{100}
592
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)(Cell)
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutPSUTRAN]/[IRATHO.AttOutPSUTRAN]*{100}
HSDPA Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.HSDPA.SuccOutPSUTRAN]/
[VS.IRATHO.HSDPA.AttOutPSUTRAN]*{100}
E-DCH Soft
Handover Success
Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100}
E-DCH to DCH
Handover Success
Ratio (with Inter
HHO)
HSUPA
Measuremen
t per cell
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]/
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Att]*{100}
HSUPA Inter-RAT
Handover Success
Ratio (UTRAN to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.HSUPA.IRATHO.SuccOutPSUTRAN]/
[VS.HSUPA.IRATHO.AttOutPSUTRAN]*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
593
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.Norm.Rel.CS.Conv.RB.
64]+
[VS.RAB.Loss.CS.Conv64K])
*{100}
PS Service Drop
Ratio
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100}
HSDPA Service
Drop Ratio
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+[VS.HSDPA.RAB.Loss.InActivity])*{100}
594
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Service
Drop Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
HSDPA Mean UE
number
numb
er
HSDPA
Measuremen
t per cell
[VS.HSDPA.UE.Mean.Cell]
byte
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]
595
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA Mean UE
number
numb
er
HSUPA
Measuremen
t per cell
[VS.HSUPA.UE.Mean.Cell]
byte
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessib
ility
IU Paging Success
Ratio
Measuremen
t related to
Paging per
RNC
[VS.RANAP.Paging.Succ.Idle
UE]/
[VS.RANAP.Paging.Att.IdleU
E]*{100}
596
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Radio Access
Success Ratio
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
597
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100})*
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
/
(([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str])+
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
RRC Setup Success
Ratio(other)
Issue 02 (2011-08-25)
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
*{100}
598
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
599
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100}
Issue 02 (2011-08-25)
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100}
VP RAB Setup
Success Ratio
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100}
PS RAB Setup
Success Ratio
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100}
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100}
600
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Coverage
Soft
Handover
Measuremen
t per RNC
(([VS.SHO.AS.1]+
([VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft])*{2}+
([VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer])*
{3})/([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]){1})*{100}
601
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Soft Handover
Success Ratio(RNC)
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100}
HS-DSCH Service
Cell Change Success
Ratio with SHO
(HSDPA to HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100}
Inter-frequency Hard
Handover Success
Ratio
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC]
*{100}
Inter-frequency Hard
Handover Success
Ratio (HSDPA to
HSDPA)
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100}
602
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Inter-RAT
Handover Success
Ratio (WCDMA to
GSM)(RNC)
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100}
PS Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)(RNC)
Measuremen
t related to PS
IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUT
RAN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100}
HSDPA Inter-RAT
Handover Success
Ratio (WCDMA to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.HSDPA.SuccOutPSUTRAN]/
[VS.IRATHO.HSDPA.AttOutPSUTRAN]*{100}
TRNC Relocation
Success Ratio
Measuremen
t of relocation
per DRNC
([VS.TRELOC.SuccExec.UEI
nv]+
[VS.TRELOC.SuccExec.UENotInv])/
([VS.TRELOC.AttPrep.UEInv
]+[VS.TRELOC.AttPrep.UENonInv])*{100}
E-DCH Soft
Handover Success
Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100}
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100}
E-DCH to DCH
Handover Success
Ratio (with Inter
HHO)
HSUPA
Measuremen
t per cell
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]/
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Att]*{100}
HSUPA Inter-RAT
Handover Success
Ratio (UTRAN to
GPRS)
InterRAT
Handover
Measuremen
t per cell
[VS.HSUPA.IRATHO.SuccOutPSUTRAN]/
[VS.HSUPA.IRATHO.AttOutPSUTRAN]*{100}
603
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Retainabi
lity
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100}
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.Norm.Rel.CS.Conv.RB.
64]+
[VS.RAB.Loss.CS.Conv64K])
*{100}
PS Service Drop
Ratio
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100}
604
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA Service
Drop Ratio
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+[VS.HSDPA.RAB.Loss.InActivity])*{100}
HSUPA Service
Drop Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
])*{100}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
605
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
CS Equivalent
Traffic
Erl
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
PS UL Throughput
kbit/s
Traffic
Measuremen
t per RNC
[VS.PSLoad.ULThruput.RNC
]
PS DL Throughput
kbit/s
Traffic
Measuremen
t per RNC
[VS.PSLoad.DLThruput.RNC
]
AMR12.2KDL_Erl
(Cell)
Erl
Measuremen
t of RB
Procedure
per cell
[VS.AMR.Ctrl.DL12.2]
CSConv64KDL_Erl
(Cell)
Erl
Measuremen
t of RB
Procedure
per cell
[VS.RB.DLConvCS.64]
HSDPA Mean UE
number
numb
er
HSDPA
Measuremen
t per cell
[VS.HSDPA.UE.Mean.Cell]
byte
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]
HSUPA Mean UE
number
numb
er
HSUPA
Measuremen
t per cell
[VS.HSUPA.UE.Mean.Cell]
byte
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
606
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
607
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Accessab
ility
RRC Connection
Establishment
Success Rate
(Service)
none
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]))/
(([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInter-
608
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Call]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]))
Issue 02 (2011-08-25)
RRC Connection
Establishment
Success Rate (Other)
none
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
RAB Establishment
Success Rate - CS
none
Measuremen
t of CS RAB
assignment
setup per
RNC
([VS.RAB.SuccEstab.AMR.S
PU]+
[VS.RAB.SuccEstCS.Conv.
64.SPU])/
([VS.RAB.AttEstab.AMR.PL
MN.RNC]+
[VS.RAB.AttEstCS.Conv.64])
RAB Establishment
Success Rate-PS
none
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])
609
PRS
Performance Report Reference
Subrep
ort
Name
Retainabi
lity
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RAB Establishment
Success RateHSDPA
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.SuccEstab])/([VS.HSDPA.RAB.AttEstab])
RAB Establishment
Success RateHSUPA
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.SuccEstab])/([VS.HSUPA.RAB.AttEstab])
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.AMR])/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.Conv64K]
)/
([VS.Norm.Rel.CS.Conv.RB.
64]+
[VS.RAB.Loss.CS.Conv64K])
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.Nor
m]+
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])
610
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
HSDPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])
611
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
RRC
connection
release
measurement
per cell
(([RRC.AttConnRelDCCH.Co
ngestion]+
[RRC.AttConnRelCCCH.Con
gestion]+
[RRC.AttConnRelDCCH.ReEstRej]+
[RRC.AttConnRelCCCH.ReEstRej]+
[RRC.AttConnRelDCCH.Unspec]+
[RRC.AttConnRelCCCH.Unspec]-[VS.RAB.Loss.CS.Abnorm][VS.RAB.Loss.CS.RF][VS.RAB.Loss.PS.RF][VS.RAB.Loss.PS.Abnorm]))/
(([RRC.AttConnRelDCCH.No
rmRel]+
[RRC.AttConnRelCCCH.Nor
mRel]+
[RRC.AttConnRelDCCH.Con
gestion]+
[RRC.AttConnRelCCCH.Con
gestion]+
[RRC.AttConnRelDCCH.Preempt]+
[RRC.AttConnRelCCCH.Preempt]+
[RRC.AttConnRelDCCH.ReEstRej]+
[RRC.AttConnRelCCCH.ReEstRej]+
[RRC.AttConnRelDCCH.SigConReEst]+
[RRC.AttConnRelCCCH.SigConReEst]+
[RRC.AttConnRelDCCH.UsrInact]+
[RRC.AttConnRelCCCH.UsrInact]+
[RRC.AttConnRelDCCH.Unspec]+
[RRC.AttConnRelCCCH.Unspec]))
612
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Mobility
Soft Handover
Success Rate
none
Soft
Handover
Measuremen
t per cell
([VS.SoHO.ASU.SuccRLAdd]+
[VS.SoHO.ASU.SuccRlDel]+
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([VS.SoHO.ASU.AttRLAdd]+
[VS.SoHO.ASU.AttRlDel]+
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])
Intra-Frequency
Hard Handover
Success Rate
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.SuccOutIntraNodeBIntraFreq]+
[VS.HHO.SuccOutInterNodeBIntraRNCIntraFreq]+
[VS.HHO.SuccOutInterRNCIntraFreqIur])/
([VS.HHO.AttOutIntraNodeBIntraFreq]+
[VS.HHO.AttOutInterNodeBIntraRNCIntraFreq]+
[VS.HHO.AttOutInterRNCIntraFreqIur])
Inter-Frequency
Hard Handover
Success Rate-CS&/
PS
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.SuccOut])/
([VS.HHO.InterFreq.AttOut])
Inter-Frequency
Hard Handover
Success Rate-intraRNC
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.SuccOutIntraNodeBInterFreq]+
[VS.HHO.SuccOutInterNodeBIntraRNCInterFreq])/
([VS.HHO.AttOutIntraNodeBInterFreq]+
[VS.HHO.AttOutInterNodeBIntraRNCInterFreq])
Inter-Frequency
Hard Handover
Success Rate-interRNC
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.SuccOutInterRNCInterFreqIur]/
[VS.HHO.AttOutInterRNCInterFreqIur]
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.SHO.CellChg.S
uccOut])/
([VS.HSDPA.SHO.CellChg.A
ttOut])
613
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.HHO.SuccOutInterFreq])/
([VS.HSDPA.HHO.AttOutInterFreq])
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.SHO.ServCellC
hg.Succ])/
([VS.HSUPA.SHO.ServCellC
hg.Att])
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.HHO.IntraFreq.
NoChR.Succ])/
([VS.HSUPA.HHO.IntraFreq.
NoChR.Att])
none
HSUPA
Measuremen
t per cell
([VS.HSUPA.HHO.InterFreq.
NoChR.Succ])/
([VS.HSUPA.HHO.InterFreq.
NoChR.Att])
Handover Success
Rate (3G to 2G)Voice
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.SuccOutCS])/
([IRATHO.AttOutCS])
Handover Success
Rate (3G to 2G)-PS
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.SuccOutPSUTRAN])/([IRATHO.AttOutPSUTRAN])
Handover Success
Rate (3G to 2G)HSDPA
none
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.HSDPA.SuccOutPSUTRAN]/
[VS.IRATHO.HSDPA.AttOutPSUTRAN]
Handover Success
Rate (3G to 2G)HSUPA
none
InterRAT
Handover
Measuremen
t per cell
[VS.HSUPA.IRATHO.SuccOutPSUTRAN]/
[VS.HSUPA.IRATHO.AttOutPSUTRAN]
614
PRS
Performance Report Reference
Subrep
ort
Name
Traffic
Availabil
ity
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Handover Success
Rate (2G to 3G)Voice
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccIncCS]/
[VS.IRATHO.PrepSuccCSIn]
Handover Success
Rate (2G to 3G)-PS
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]/
[VS.RRC.AttConnEstab.CellR
es]
CS Traffic (Erl)
none
Traffic
Measuremen
t per RNC
[VS.CSLoad.Erlang.Equiv.RN
C]
R99 PS DL
Throughput(kbit)
none
Traffic
Measuremen
t per RNC
[VS.PSLoad.kbits.DL.0.32]+
[VS.PSLoad.kbits.DL.32.64]+
[VS.PSLoad.kbits.DL.64.144]
+[VS.PSLoad.kbits.DL.
144.384]
R99 PS UL
Throughput(kbit)
none
Traffic
Measuremen
t per RNC
[VS.PSLoad.kbits.UL.0.32]+
[VS.PSLoad.kbits.UL.32.64]+
[VS.PSLoad.kbits.UL.64.144]
+[VS.PSLoad.kbits.UL.
144.384]
HSDPA Throughput
(kbit)
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]*{8}/{1000}
HSUPA Throughput
(kbit)
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]*{8}/{1000}
MBMS Throughput
(kbit)
none
Traffic
Measuremen
t per RNC
[VS.MBMSPSLoad.DLThrup
ut.RNC]*{GP}*{60}
Code Usage
none
Measuremen
t of multiRAB service
per cell
[VS.RAB.SFOccupy]/{256}
TCP Usage
none
Cell TX and
RX Power
Measuremen
t per cell
[VS.MeanTCP]
615
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
VS.RAB.Loss.CS
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm]
616
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
617
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPreempt][VS.RAB.Loss.CS.Aal2Loss]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
618
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS RAB
Fail
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
619
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.I
UB.Band
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.Unsp.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstCS.Unsp][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.Other.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
620
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS Call
Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.RAB.Loss.PS
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
621
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPreempt][VS.RAB.Loss.PS.GTPULoss]
622
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS RAB
Fail
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
623
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.I
UB.Band
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
624
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabP
S.Unsp.Other
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.FailEstPS.Unsp][VS.RAB.FailEstPs.Power.Co
ng][VS.RAB.FailEstPs.Code.Con
g][VS.RAB.FailEstPs.ULCE.Co
ng][VS.RAB.FailEstPs.DLCE.Co
ng][VS.RAB.FailEstPs.IUB.Band
]
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
625
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC Fail
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
626
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
627
PRS
Performance Report Reference
21
Issue 02 (2011-08-25)
628
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
629
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLBkgPS.64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
630
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
631
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 02 (2011-08-25)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
632
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
*{100.00}
633
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
634
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL.
Cell
none
Soft
Handover
Measuremen
t per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/{2}+
[VS.SHO.AS.3RL]/{3}+
[VS.SHO.AS.4RL]/{4}+
[VS.SHO.AS.5RL]/{5}+
[VS.SHO.AS.6RL]/{6}))-{1}
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*
{100.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
635
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.HHO.InterFreq.S
uccOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utPSUNTRAN.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutPSUTRAN]/[IRATHO.AttOutPSUTRAN]*{100.00}
IRATHO.SuccOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
636
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.AMR.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.CS.VP.Call.Dro
p.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
637
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Release.PS
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
638
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm]
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
639
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPreempt][VS.RAB.Loss.CS.Aal2Loss]
VP Call
Drops
VS.CS.VP.Call.Dro
p.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
AMR
Call
Drops
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
PS Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
640
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
641
PRS
Performance Report Reference
Subrep
ort
Name
RRC Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPreempt][VS.RAB.Loss.PS.GTPULoss]
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConEst.
Cell
none
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConEst.DCH]+
[VS.RRC.AttConEst.CCH]
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
642
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
643
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.DLIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.ULIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.Unsp.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstCS.Unsp][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
644
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS RAB
FAIL
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
645
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.DLIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.ULIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstabP
S.Unsp.Other
none
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.Unsp][VS.RAB.FailEstPs.Power.Co
ng][VS.RAB.FailEstPs.Code.Con
g][VS.RAB.FailEstPs.ULCE.Co
ng][VS.RAB.FailEstPs.DLCE.Co
ng][VS.RAB.FailEstab.PS.DLIU
BBand.Cong][VS.RAB.FailEstab.PS.ULIU
BBand.Cong]
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
646
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
FAIL
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
647
PRS
Performance Report Reference
Subrep
ort
Name
InterFRe
quest
HHO
Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
648
PRS
Performance Report Reference
Subrep
ort
Name
CS
InterRA
T HHO
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailUSR][VS.HHO.InterFreqOut.CellUpdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
VS.IRATHO.FailOutCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
649
PRS
Performance Report Reference
Subrep
ort
Name
PS
InterRA
T HHO
FAIL
HSDPA
HHO
IntraFRe
quest Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
IRATHO.FailOutCS
.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS
.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUnsupp][IRATHO.FailOutCS.PhyChFail]
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN]
IRATHO.AttOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
VS.HSDPA.ServCel
lChg.HHO.IntraFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntraFreq][VS.HSDPA.HHO.SuccOutIntraFreq]
650
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
HHO
InterFRe
quest Fail
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.HHO.InterFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInterFreq][VS.HSDPA.HHO.SuccOutInterFreq]
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
651
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Access
HSDPA
HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanC
hThroughput.TotalMBps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/({GP}*
{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100.00}
652
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.S
uccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
653
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
CDR
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
654
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
RAB Fail
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.MACDFailStpPerCell
times
HSDPA
Measuremen
t per cell
VS.HSDPA.MACDAttStpPerCell
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MACDSuccStpPerCell]+
[VS.HSDPA.MACDFailStpPerCell]
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
HSDPA
RAB
Abnorm
Rel
Issue 02 (2011-08-25)
655
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
FACHto
HSDSC
H Fail
HSDPA
HSDSC
HtoFAC
H Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
VS.HSDPA.MeanC
hThroughput.NEW
none
HSDPA
Measuremen
t per cell
({8}*
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
([VS.HSDPA.MeanChThroug
hput.Times]))
VS.HSDPA.MeanC
hThroughput.TotalBytes
byte
HSDPA
Measuremen
t per cell
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD.
Mean.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.FA
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.FACHtoHS
DSCH.Att][VS.HSDPA.ChR.FACHtoHSDSCH]
VS.HSDPA.ChR.FA
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoFACH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
FACH.Att][VS.HSDPA.ChR.HSDSCHto
FACH]
VS.HSDPA.ChR.HS
DSCHtoFACH.Att
times
HSDPA
Measuremen
t per cell
656
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
HSDSC
HtoDCH
Fail
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
HSDPA
DCHtoH
SDSCH
Fail
HSDPA
ServCell
Chg Fail
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Issue 02 (2011-08-25)
657
PRS
Performance Report Reference
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 02 (2011-08-25)
658
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
CDR
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
659
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.64
numb
er
Measuremen
t of RB
Procedure
per cell
660
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLBkgPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
661
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLBkgPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
662
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
663
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 02 (2011-08-25)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
664
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
*{100.00}
665
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
666
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL.
Cell
none
Soft
Handover
Measuremen
t per cell
(([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]+
[VS.SHO.AS.3RL]+
[VS.SHO.AS.4RL]+
[VS.SHO.AS.5RL]+
[VS.SHO.AS.6RL])/
([VS.SHO.AS.1RL]+
[VS.SHO.AS.2RL]/{2}+
[VS.SHO.AS.3RL]/{3}+
[VS.SHO.AS.4RL]/{4}+
[VS.SHO.AS.5RL]/{5}+
[VS.SHO.AS.6RL]/{6}))-{1}
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*
{100.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
667
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.HHO.InterFreq.S
uccOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.SuccO
utPSUNTRAN.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutPSUTRAN]/[IRATHO.AttOutPSUTRAN]*{100.00}
IRATHO.SuccOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.AttOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
668
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.AMR.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.CS.VP.Call.Dro
p.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
669
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Release.PS
.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
670
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Access
HSDPA
HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.MeanC
hThroughput.TotalMBps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/({GP}*
{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutInterFreq
times
HSDPA
Measuremen
t per cell
671
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
672
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
673
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 02 (2011-08-25)
674
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
CDR
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
675
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
Failed
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
RRC.FailConnEstab.
Cong
times
RRC
connection
reject
measurement
per cell
676
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
Failed
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
677
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabC
S.RNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Unsp
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
678
PRS
Performance Report Reference
Subrep
ort
Name
PS RAB
Failed
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.AttEstabPS
.Conv
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
VS.RAB.FailEstPS.
RNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Unsp
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
679
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.ULIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.DLIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
680
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
HSDPA
RAB
Failed
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
HSUPA
RAB
Failed
VS.HSUPA.RAB.Fa
ilEstab
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.AttEstab][VS.HSUPA.RAB.SuccEstab]
HSDPA
ChR
HSDSC
HtoDCH
Fail
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
HSDPA
ChR
DCHtoH
SDSCH
Fail
VS.HSDPA.ChR.D
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
681
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
VS.RAB.SuccEstab
CS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstabCS.Conv]
+[VS.RAB.SuccEstabCS.Str]
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
682
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
683
PRS
Performance Report Reference
Subrep
ort
Name
PS Call
Drop
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPreempt][VS.RAB.Loss.CS.Aal2Loss]
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
684
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Call
Drop
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPreempt][VS.RAB.Loss.PS.GTPULoss]
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
685
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
Call
Drop
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
lease
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
686
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
Failed
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
687
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
InterFRe
quest
HHO
Failed
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.DLCodeRej
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.ULAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
688
PRS
Performance Report Reference
Subrep
ort
Name
CS
InterRA
T HHO
Failed
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreqO
ut.DLAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailUSR][VS.HHO.InterFreqOut.CellUpdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
VS.IRATHO.FailOutCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS
.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS
.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUnsupp][IRATHO.FailOutCS.PhyChFail]
689
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS
InterRA
T HHO
Failed
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN]
IRATHO.AttOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
VS.HSDPA.ServCel
lChg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
IntraFRe
quest
NoChR
Fail
VS.HSDPA.ServCel
lChg.HHO.IntraFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntraFreq][VS.HSDPA.HHO.SuccOutIntraFreq]
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
InterFRe
quest
VS.HSDPA.ServCel
lChg.HHO.InterFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInterFreq][VS.HSDPA.HHO.SuccOutInterFreq]
HSDPA
ServCell
Chg SHO
Fail
Issue 02 (2011-08-25)
690
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
NoChR
Fail
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
HSUPA
EDCH
SHO Fail
VS.HSUPA.EDCH.
SHO.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Att]
[VS.HSUPA.EDCH.SHO.Suc
c]
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Att][VS.HSUPA.SHO.ServCellCh
g.Succ]
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Att][VS.HSUPA.HHO.InterFreq.
NoChR.Succ]
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
HSUPA
SHO
ServCell
Chg Fail
HSUPA
HHO
InterFRe
quest
NoChR
Fail
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
Issue 02 (2011-08-25)
691
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
KPI1
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.R99PSLoad.DL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.MBMSPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
692
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Rate.Service
RRC
connection
setup
measurement
per RNC
(([VS.RRC.SuccConnEstab.O
rgConv]+
[VS.RRC.SuccConnEstab.Org
Str]+
[VS.RRC.SuccConnEstab.OrgInt]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Org
Subs]+
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]+
[VS.RRC.SuccConnEstab.Org
HPSi]+
[VS.RRC.SuccConnEstab.Og
LPSig]+
[VS.RRC.SuccConnEstab.Tm
HPSi]+
[VS.RRC.SuccConnEstab.Tm
LPSi]+
[VS.RRC.SuccConnEstab.Res
t]))/
(([VS.RRC.AttConnEstab.Org
Conv]+
[VS.RRC.AttConnEstab.OrgS
tr]+
[VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.OrgSubs]+
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]+
[VS.RRC.AttConnEstab.OrgH
PSig]+
693
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[VS.RRC.AttConnEstab.OrgL
PSig]+
[VS.RRC.AttConnEstab.TmH
PSig]+
[VS.RRC.AttConnEstab.TmL
PSig]+
[VS.RRC.AttConnEstab.Rest]
))*{100.00}
Issue 02 (2011-08-25)
VS.RRC.SuccConn
Estab.Rate.Other
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.E
mg]+
[VS.RRC.SuccConnEstab.Cell
Res]+
[VS.RRC.SuccConnEstab.Reg
]+
[VS.RRC.SuccConnEstab.Detach]+
[VS.RRC.SuccConnEstab.Unknown])/
([VS.RRC.AttConnEstab.Emg
]+
[VS.RRC.AttConnEstab.CellR
es]+
[VS.RRC.AttConnEstab.Reg]
+[VS.RRC.AttConnEstab.Detach]+
[VS.RRC.AttConnEstab.Unknown])*{100.00}
RAB.SuccEstabCSC
onv0.32.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv0.32.
RNC]/
[VS.RAB.AttEstCSConv0.32.
RNC]*{100.00}
RAB.SuccEstabCSC
onv32.64.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv32.6
4.RNC]/
[VS.RAB.AttEstCSConv32.64
.RNC]*{100.00}
694
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstPS.
RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
(([RAB.SuccEstabPSNoQueui
ng.Bgrd]+
[RAB.SuccEstabPSQueuing.B
grd])+
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSQueuing.C
onv])+
([RAB.SuccEstabPSNoQueui
ng.Intact]+
[RAB.SuccEstabPSQueuing.I
ntact])+
([RAB.SuccEstabPSQueuing.
Strm]+
[RAB.SuccEstabPSNoQueuin
g.Strm]))/
([RAB.AttEstabPS.Bgrd]+
[RAB.AttEstabPS.Strm]+
[RAB.AttEstabPS.Intact]+
[RAB.AttEstabPS.Conv])*
{100.00}
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.3Soft2Softer]*
{3}+[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
695
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC]
*{100.00}
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to PS
IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUT
RAN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
VS.AMR.Call.Drop.
RNC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.AMR.RNC
]/
[VS.RAB.SucEstCSConv0.32.
RNC]*{100.00}
VS.VP.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.Conv64K.
RNC]/
[VS.RAB.SucEstCSConv32.6
4.RNC]*{100.00}
696
PRS
Performance Report Reference
Subrep
ort
Name
KPI2
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
(([VS.RAB.Loss.PS.RF.RNC]
+
[VS.RAB.Loss.PS.Abnorm.R
NC]))/
(([RAB.SuccEstabPSNoQueui
ng.Bgrd]+
[RAB.SuccEstabPSQueuing.B
grd])+
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSQueuing.C
onv])+
([RAB.SuccEstabPSNoQueui
ng.Intact]+
[RAB.SuccEstabPSQueuing.I
ntact])+
([RAB.SuccEstabPSQueuing.
Strm]+
[RAB.SuccEstabPSNoQueuin
g.Strm]))*{100.00}
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanC
hThroughput.TotalMBps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/({GP}*
{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.ServCel
lChg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100.00}
697
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
698
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
699
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AMR
12.2
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
700
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
701
PRS
Performance Report Reference
Subrep
ort
Name
VP
Traffic
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
702
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
703
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
704
PRS
Performance Report Reference
Subrep
ort
Name
PS384
Traffic
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
705
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
706
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
707
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Traffic
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.HSDPA.Kbps.M
eanChThroughput
none
HSDPA
Measuremen
t per cell
{8}*
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({GP}*{60}*
{1024})
VS.HSDPA.MeanC
hThroughput.TotalMBps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/({GP}*
{60})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.MACDAttStpPerCell
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MACDSuccStpPerCell]+
[VS.HSDPA.MACDFailStpPerCell]
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.ChR.FA
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.FACHtoHS
DSCH.Att][VS.HSDPA.ChR.FACHtoHSDSCH]
708
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
Traffic
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.ChR.HS
DSCHtoFACH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
FACH.Att][VS.HSDPA.ChR.HSDSCHto
FACH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.D
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.MACDSuccStpPerCell
times
HSDPA
Measuremen
t per cell
VS.HSUPA.MeanC
hThroughput.TotalMBytes
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.HSUPA.Kbps.M
eanChThroughput
none
HSUPA
Measuremen
t per cell
{8}*
[VS.HSUPA.MeanChThrough
put.TotalBytes]/({GP}*{60}*
{1024})
VS.HSUPA.UE.Mea
n.Cell
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.RAB.Fa
ilEstab
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.AttEstab][VS.HSUPA.RAB.SuccEstab]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
709
PRS
Performance Report Reference
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VIC KPI
VS.Call.Drop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm])+
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
710
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
711
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
712
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSDPA.ServCel
lChg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
713
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100.00}
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100.00}
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
714
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
VS.RAB.SuccEstab
CS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstabCS.Conv]
+[VS.RAB.SuccEstabCS.Str]
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
715
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
716
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPreempt][VS.RAB.Loss.CS.Aal2Loss]
VS.Cell.UnavailTim
e.OM
Measuremen
t related to
Algorithm
per cell
VS.Cell.UnavailTim
e.OM.Rate
Measuremen
t related to
Algorithm
per cell
[VS.Cell.UnavailTime.OM]*
{100}/({GP}*{60})*{100.00}
VP Call
Drops
VS.CS.VP.Call.Dro
p.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
AMR
Call
Drops
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
PS Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
Cell
Unavaila
ble
Issue 02 (2011-08-25)
717
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqPS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
718
PRS
Performance Report Reference
Subrep
ort
Name
RRC Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPreempt][VS.RAB.Loss.PS.GTPULoss]
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConEst.
Cell
none
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConEst.DCH]+
[VS.RRC.AttConEst.CCH]
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
719
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
720
PRS
Performance Report Reference
Subrep
ort
Name
PS RAB
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.I
UB.Band
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
721
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
722
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPs.I
UB.Band
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
723
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
(cluster)
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
PS.Inter.KByte.DL.
Throughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Int.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.128.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.384.Thruput]/
({1024}*{8}))
PS.Bkg.KByte.DL.T
hroughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.
128.Thruput]/({1024}*{8}))+
([VS.PS.Bkg.DL.
384.Thruput]/({1024}*{8}))
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.AMR.Call.Duration
none
Measuremen
t of RB
Procedure
per cell
([VS.AMR.Ctrl.DL12.2]*
{60}*{60})/
[VS.RAB.SuccEstab.AMR]
VS.HSDPA.Kbps.M
eanChThroughput
none
HSDPA
Measuremen
t per cell
{8}*
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({GP}*{60}*
{1024})
VS.PS.Throughput.
DL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.64.Thruput]/
[VS.PS.Bkg.DL.64.Times])+
([VS.PS.Int.DL.64.Thruput]/
[VS.PS.Int.DL.64.Times])
Through
put
(cluster)
Issue 02 (2011-08-25)
724
PRS
Performance Report Reference
Subrep
ort
Name
Access
(cluster)
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Throughput.
DL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
128.Thruput]/[VS.PS.Bkg.DL.
128.Times])+([VS.PS.Int.DL.
128.Thruput]/[VS.PS.Int.DL.
128.Times])
VS.PS.Throughput.
DL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
384.Thruput]/[VS.PS.Bkg.DL.
384.Times])+([VS.PS.Int.DL.
384.Thruput]/[VS.PS.Int.DL.
384.Times])
VS.PS.Throughput.
UL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.64.Thruput]/
[VS.PS.Bkg.UL.64.Times])+
([VS.PS.Int.UL.64.Thruput]/
[VS.PS.Int.UL.64.Times])
VS.PS.Throughput.
UL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
128.Thruput]/[VS.PS.Bkg.UL.
128.Times])+([VS.PS.Int.UL.
128.Thruput]/[VS.PS.Int.UL.
128.Times])
VS.PS.Throughput.
UL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
384.Thruput]/[VS.PS.Bkg.UL.
384.Times])+([VS.PS.Int.UL.
384.Thruput]/[VS.PS.Int.UL.
384.Times])
Call.Setup.Success.
Rate.AMR
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR])
Call.Setup.Success.
Rate.VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
([VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64])
725
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call.Setup.Success.
Rate.AMR_VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
(([VS.RAB.SuccEstab.AMR]
+[VS.RAB.SuccEstCS.Conv.
64])/
([VS.RAB.AttEstab.AMR]+
[VS.RAB.AttEstCS.Conv.
64]))
Call.Setup.Success.
Rate.PS
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
(([VS.RAB.SuccEstabPS.Con
v]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
RRC.Setup.Success.
Rate.Conv
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.TmCon
vCall])/
([RRC.AttConnEstab.TmCon
vCall]+
[RRC.AttConnEstab.OrgConvCall])
RRC.Setup.Success.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.TmCon
vCall]
RRC.Setup.Attempt.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.OrgConvCall]
726
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
Rate.Str
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.TmStr
Call])/
([RRC.AttConnEstab.TmStrC
all]+
[RRC.AttConnEstab.OrgStrCall])
RRC.Setup.Success.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.TmStr
Call]
RRC.Setup.Attempt.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.OrgStrCall]
RRC.Setup.Success.
Rate.BESer
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig])/
([RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.TmHhPr
Sig])
727
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig]
RRC.Setup.Attempt.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.TmHhPr
Sig]
728
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other_ORO.R
ate.Cell
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallReEst])/
([RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEst])
729
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.SuccConnEsta
b.Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallReEst]
RRC.AttConnEstab.
Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEst]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
730
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Rate.Cell.AMR_
VP
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])/
([VS.RAB.AttEstCS.Conv.64]
+[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
VS.RAB.AttEstab.A
MR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstCS.Conv.64]
+[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
731
PRS
Performance Report Reference
Subrep
ort
Name
CDR
(cluster)
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
RRC.Req.Call.Per.S
ervice
RRC
connection
setup
measurement
per cell
([VS.RRC.AttConnEstab.Cell]
)/
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RAB.SuccEstab
CSPS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstabCS.Conv
]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])
Radio.Call.Drop.Rat
e.AMR
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF.AMR]/
[VS.RAB.SuccEstab.AMR]
732
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.R
F.AMR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR])
/[VS.RAB.SuccEstCS.Conv.
64]
VS.RAB.Loss.RF.V
P
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR]
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]/
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.RAB.Loss.CS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
733
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
Radio.Call.Drop.Rat
e.PS.HSDPA
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.RF]/
[VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.Lo
ss.RF
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
734
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.Call.Drop.Ra
te.Cell.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K])
/([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.CS.Call.Drop.Ce
ll.AMR_VP
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
735
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HO
(cluster)
Radio.Link.Add.Suc
c.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]/
[SHO.AttRLAddUESide]
SHO.SuccRLAddU
ESide
times
Soft
Handover
Measuremen
t per cell
SHO.AttRLAddUESide
times
Soft
Handover
Measuremen
t per cell
Radio.Link.Del.Succ
.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLDelUESide]/
[SHO.AttRLDelUESide]
SHO.SuccRLDelUE
Side
times
Soft
Handover
Measuremen
t per cell
SHO.AttRLDelUESide
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*
{100.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
HO.3G_2G.CS.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[VS.RAB.SuccEstab.AMR]
736
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
737
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
FAIL
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
InterFRe
quest
HHO
Fail
Issue 02 (2011-08-25)
738
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.DLCodeRej
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.ULAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.DLAdmsnDeny
times
Hard
Handover
Measuremen
t per cell
739
PRS
Performance Report Reference
Subrep
ort
Name
CS
InterRA
T HHO
FAIL
PS
InterRA
T HHO
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailUSR][VS.HHO.InterFreqOut.CellUpdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
VS.IRATHO.FailOutCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS
.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS
.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUnsupp][IRATHO.FailOutCS.PhyChFail]
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN]
740
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
IRATHO.AttOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
741
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hot
Traffic
Cell
(AMR
Ctrl
DL12.2)
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
742
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
743
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.PS64.S
uccRelocOut.Cell.R
ate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS64.SuccRelocOut]/
[VS.IRATHO.PS64.ReqRelocOut]
VS.IRATHO.PS128.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS128.SuccRelocOut]/
[VS.IRATHO.PS128.ReqRelocOut]
VS.IRATHO.PS384.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS384.SuccRelocOut]/
[VS.IRATHO.PS384.ReqRelocOut]
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
744
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hot
Traffic
Cell(RB
DLInterP
S 384)
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
745
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
746
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.PS64.S
uccRelocOut.Cell.R
ate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS64.SuccRelocOut]/
[VS.IRATHO.PS64.ReqRelocOut]
VS.IRATHO.PS128.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS128.SuccRelocOut]/
[VS.IRATHO.PS128.ReqRelocOut]
VS.IRATHO.PS384.
SuccRelocOut.Cell.
Rate
InterRAT
Handover
Measuremen
t per cell
[VS.IRATHO.PS384.SuccRelocOut]/
[VS.IRATHO.PS384.ReqRelocOut]
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
747
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
RAB Fail
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
HSDPA
RAB
Abnorm
Rel
Issue 02 (2011-08-25)
748
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
HHO
IntraFRe
quest Fail
HSDPA
HHO
InterFRe
quest Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
VS.HSDPA.MeanC
hThroughput.NEW
none
HSDPA
Measuremen
t per cell
({8}*
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
([VS.HSDPA.MeanChThroug
hput.Times]))
VS.HSDPA.MeanC
hThroughput.TotalBytes
byte
HSDPA
Measuremen
t per cell
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD.
Mean.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.HHO.IntraFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntraFreq][VS.HSDPA.HHO.SuccOutIntraFreq]
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.HHO.InterFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInterFreq][VS.HSDPA.HHO.SuccOutInterFreq]
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
749
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
HSDSC
HtoDCH
Fail
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
HSDPA
DCHtoH
SDSCH
Fail
HSDPA
ServCell
Chg Fail
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Issue 02 (2011-08-25)
750
PRS
Performance Report Reference
Object Type
IUR Interface
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iur
Performa
nce
VS.Iur.SHO.Att
times
Measuremen
t related to
SRNC in Iur
interface
VS.Iur.SHO.Succ
times
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.SHO.Succ.
Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.Iur.SHO.Succ]/
[VS.Iur.SHO.Att]*{100.00}
VS.SHO.SuccRLSet
upIur.Rx
times
Measuremen
t related to
SRNC in Iur
interface
VS.SHO.AttRLSetu
pIur.Tx
times
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.RL.Setup.S
ucc.Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.SHO.SuccRLSetupIur.Rx
]/
[VS.SHO.AttRLSetupIur.Tx]*
{100.00}
VS.SHO.SuccRLAd
dIur.Rx
times
Measuremen
t related to
SRNC in Iur
interface
VS.SHO.AttRLAddI
ur.Tx
times
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.RL.Additio
n.Succ.Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.SHO.SuccRLAddIur.Rx]/
[VS.SHO.AttRLAddIur.Tx]*
{100.00}
751
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.SuccRLRe
cfgIur.Rx
numb
er
Measuremen
t related to
SRNC in Iur
interface
VS.SHO.AttRLRecf
gIur.Tx
numb
er
Measuremen
t related to
SRNC in Iur
interface
VS.IUR.RL.RECFG
.Succe.Rate
Measuremen
t related to
SRNC in Iur
interface
[VS.SHO.SuccRLRecfgIur.Rx
]/
[VS.SHO.AttRLRecfgIur.Tx]
*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
752
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
PS.Inter.KByte.DL.
Throughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Int.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.128.Thruput]/
({1024}*{8}))+
([VS.PS.Int.DL.384.Thruput]/
({1024}*{8}))
PS.Bkg.KByte.DL.T
hroughput
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.8.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.64.Thruput]/
({1024}*{8}))+
([VS.PS.Bkg.DL.
128.Thruput]/({1024}*{8}))+
([VS.PS.Bkg.DL.
384.Thruput]/({1024}*{8}))
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.AMR.Call.Duration
none
Measuremen
t of RB
Procedure
per cell
([VS.AMR.Ctrl.DL12.2]*
{60}*{60})/
[VS.RAB.SuccEstab.AMR]
VS.HSDPA.Kbps.M
eanChThroughput
none
HSDPA
Measuremen
t per cell
{8}*
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({GP}*{60}*
{1024})
VS.PS.Throughput.
DL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.64.Thruput]/
[VS.PS.Bkg.DL.64.Times])+
([VS.PS.Int.DL.64.Thruput]/
[VS.PS.Int.DL.64.Times])
Through
put
Issue 02 (2011-08-25)
753
PRS
Performance Report Reference
Subrep
ort
Name
Access
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Throughput.
DL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
128.Thruput]/[VS.PS.Bkg.DL.
128.Times])+([VS.PS.Int.DL.
128.Thruput]/[VS.PS.Int.DL.
128.Times])
VS.PS.Throughput.
DL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.DL.
384.Thruput]/[VS.PS.Bkg.DL.
384.Times])+([VS.PS.Int.DL.
384.Thruput]/[VS.PS.Int.DL.
384.Times])
VS.PS.Throughput.
UL64.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.64.Thruput]/
[VS.PS.Bkg.UL.64.Times])+
([VS.PS.Int.UL.64.Thruput]/
[VS.PS.Int.UL.64.Times])
VS.PS.Throughput.
UL128.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
128.Thruput]/[VS.PS.Bkg.UL.
128.Times])+([VS.PS.Int.UL.
128.Thruput]/[VS.PS.Int.UL.
128.Times])
VS.PS.Throughput.
UL384.bps
none
Measuremen
t related to
throughput
per cell
([VS.PS.Bkg.UL.
384.Thruput]/[VS.PS.Bkg.UL.
384.Times])+([VS.PS.Int.UL.
384.Thruput]/[VS.PS.Int.UL.
384.Times])
Call.Setup.Success.
Rate.AMR
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
([VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR])
Call.Setup.Success.
Rate.VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
([VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64])
754
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
Call.Setup.Success.
Rate.AMR_VP
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
(([VS.RAB.SuccEstab.AMR]
+[VS.RAB.SuccEstCS.Conv.
64])/
([VS.RAB.AttEstab.AMR]+
[VS.RAB.AttEstCS.Conv.
64]))
Call.Setup.Success.
Rate.PS
RRC
connection
setup
measurement
per cell
(([RRC.SuccConnEstab.sum])
/
([VS.RRC.AttConnEstab.Cell]
))*
(([VS.RAB.SuccEstabPS.Con
v]+
[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]))
RRC.Setup.Success.
Rate.Conv
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.TmCon
vCall])/
([RRC.AttConnEstab.TmCon
vCall]+
[RRC.AttConnEstab.OrgConvCall])
RRC.Setup.Success.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.TmCon
vCall]
RRC.Setup.Attempt.
Conv
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.OrgConvCall]
755
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
Rate.Str
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgStr
Call]+
[RRC.SuccConnEstab.TmStr
Call])/
([RRC.AttConnEstab.TmStrC
all]+
[RRC.AttConnEstab.OrgStrCall])
RRC.Setup.Success.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.TmStr
Call]
RRC.Setup.Attempt.
Str
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.OrgStrCall]
RRC.Setup.Success.
Rate.BESer
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig])/
([RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.TmHhPr
Sig])
756
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.Setup.Success.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.TmHhP
rSig]
RRC.Setup.Attempt.
BESer
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.TmHhPr
Sig]
757
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other_ORO.R
ate.Cell
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallReEst])/
([RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEst])
758
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC.SuccConnEsta
b.Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
+[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]+
[RRC.SuccConnEstab.CallReEst]
RRC.AttConnEstab.
Other_ORO.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.TmLwPr
Sig]+
[RRC.AttConnEstab.CallReEst]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
759
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Rate.Cell.AMR_
VP
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])/
([VS.RAB.AttEstCS.Conv.64]
+[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
VS.RAB.AttEstab.A
MR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstCS.Conv.64]
+[VS.RAB.AttEstab.AMR])
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
760
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
RRC.Req.Call.Per.S
ervice
RRC
connection
setup
measurement
per cell
([VS.RRC.AttConnEstab.Cell]
)/
(([VS.RAB.SuccEstabCS.Con
v]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
VS.RRC.AttConnEs
tab.Cell
times
RRC
connection
setup
measurement
per cell
VS.RAB.SuccEstab
CSPS.Cell
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.SuccEstabCS.Conv
]+
[VS.RAB.SuccEstabCS.Str])+
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])
Radio.Call.Drop.Rat
e.AMR
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF.AMR]/
[VS.RAB.SuccEstab.AMR]
761
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.R
F.AMR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR])
/[VS.RAB.SuccEstCS.Conv.
64]
VS.RAB.Loss.RF.V
P
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF][VS.RAB.Loss.CS.RF.AMR]
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
Radio.Call.Drop.Rat
e.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]/
([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.RAB.Loss.CS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstab.
AMR_VP
none
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR]
762
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.PS.R
F
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
Radio.Call.Drop.Rat
e.PS.HSDPA
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.RF]/
[VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.Lo
ss.RF
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
763
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.Call.Drop.Ra
te.Cell.AMR_VP
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K])
/([VS.RAB.SuccEstCS.Conv.
64]+
[VS.RAB.SuccEstab.AMR])
VS.CS.Call.Drop.Ce
ll.AMR_VP
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Conv64K]
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
764
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HO
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.3Soft2Softer]*
{3}+[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
Radio.Link.Add.Suc
c.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]/
[SHO.AttRLAddUESide]
SHO.SuccRLAddU
ESide
times
Soft
Handover
Measuremen
t per cell
SHO.AttRLAddUESide
times
Soft
Handover
Measuremen
t per cell
Radio.Link.Del.Succ
.Rate
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLDelUESide]/
[SHO.AttRLDelUESide]
SHO.SuccRLDelUE
Side
times
Soft
Handover
Measuremen
t per cell
SHO.AttRLDelUESide
times
Soft
Handover
Measuremen
t per cell
765
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.Success.Ce
ll.Rate
Soft
Handover
Measuremen
t per cell
([SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide])/
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide])*
{100.00}
VS.SHO.SuccUESid
e.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.SuccRLAddUESide]+
[SHO.SuccRLDelUESide]
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
HO.3G_2G.CS.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[VS.RAB.SuccEstab.AMR]
IRATHO.SuccOutC
S
times
InterRAT
Handover
Measuremen
t per cell
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
766
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CS Call
Drop
Cells
VS.CS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]
VS.CS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm]+
[VS.RAB.Loss.CS.Norm]
767
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqCS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.RelReqCS.
UTRANgen
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.CS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
768
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.Loss.CS.A
al2Loss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.CS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Abnorm][VS.RAB.RelReqCS.OM][VS.RAB.RelReqCS.UTRAN
gen][VS.RAB.RelReqCS.RABPreempt][VS.RAB.Loss.CS.Aal2Loss]
VP Call
Drops
VS.CS.VP.Call.Dro
p.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
AMR
Call
Drops
VS.CS.AMR.Call.D
rop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]
PS Drop
Cells
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
VS.RAB.RelReqPS.
OM
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
769
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.RelReqPS.
RABPreempt
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.RLCRst
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.ULSync
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.UuNoReply
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.R
F.Oth
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.RAB.Loss.PS.G
TPULoss
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.Call.Drop.PS.Ot
her
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.Abnorm][VS.RAB.RelReqPS.OM][VS.RAB.RelReqPS.RABPreempt][VS.RAB.Loss.PS.GTPULoss]
770
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC Fail
VS.RRC.FailConnE
stab.Cell
times
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConnEstab.Cell][RRC.SuccConnEstab.sum]
VS.RRC.AttConEst.
Cell
none
RRC
connection
setup
measurement
per cell
[VS.RRC.AttConEst.DCH]+
[VS.RRC.AttConEst.CCH]
VS.RRC.Rej.RL.Fai
l
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
771
PRS
Performance Report Reference
Subrep
ort
Name
CS RAB
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Other.
Cong
times
RRC
connection
reject
measurement
per cell
[RRC.FailConnEstab.Cong][VS.RRC.Rej.Power.Cong][VS.RRC.Rej.Code.Cong][VS.RRC.Rej.UL.CE.Cong][VS.RRC.Rej.DL.CE.Cong]
RRC.FailConnEstab.
NoReply
times
RRC
connection
reject
measurement
per cell
VS.RAB.FailEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str]
VS.RAB.AttEstabC
S.Cell
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.AttEstabCS.Conv]+
[VS.RAB.AttEstabCS.Str]
VS.RAB.FailEstabC
S.TNL
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
Relo
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCS.
RIPFail
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Power.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
ULCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
772
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstCs.
DLCE.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstCs.
Code.Cong
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.DLIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstab.
CS.ULIUBBand.Co
ng
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
VS.RAB.FailEstabC
S.Unsp.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstCS.Unsp][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.RNL.Other
numb
er
Measuremen
t of CS RAB
assignment
failure per
cell
[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstCS.Relo][VS.RAB.FailEstCS.RIPFail][VS.RAB.FailEstabCS.Cong]
VS.RAB.FailEstabC
S.other.CELL
none
Measuremen
t of CS RAB
assignment
setup per cell
([VS.RAB.AttEstabCS.Conv]
+[VS.RAB.AttEstabCS.Str][VS.RAB.SuccEstabCS.Conv]
-[VS.RAB.SuccEstabCS.Str])[VS.RAB.FailEstabCS.RNL][VS.RAB.FailEstabCS.TNL]
773
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PS RAB
FAIL
VS.RAB.FailEstabP
S.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
RIPFail
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Par
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPS.
Relo
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
774
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.DLIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstab.P
S.ULIUBBand.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstabP
S.Unsp.Other
none
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.Unsp][VS.RAB.FailEstPs.Power.Co
ng][VS.RAB.FailEstPs.Code.Con
g][VS.RAB.FailEstPs.ULCE.Co
ng][VS.RAB.FailEstPs.DLCE.Co
ng][VS.RAB.FailEstab.PS.DLIU
BBand.Cong][VS.RAB.FailEstab.PS.ULIU
BBand.Cong]
VS.RAB.FlEstPS.R
NL.Other
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.FailEstPS.RNL][VS.RAB.FailEstPS.RIPFail][VS.RAB.FailEstPS.Par][VS.RAB.FailEstPS.Relo][VS.RAB.FailEstPS.Unsp]
775
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstabP
S.Other.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
(([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg]))
-[VS.RAB.FailEstPS.TNL][VS.RAB.FailEstPS.RNL]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SHO
FAIL
VS.SHO.Fail.Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide]
776
PRS
Performance Report Reference
Subrep
ort
Name
InterFRe
quest
HHO
Fail
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.AttUESide.
Cell
none
Soft
Handover
Measuremen
t per cell
[SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide]
SHO.FailRLAddUE
Side.CfgUnsup
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.Isr
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.InvCfg
times
Soft
Handover
Measuremen
t per cell
SHO.FailRLAddUE
Side.NoReply
times
Soft
Handover
Measuremen
t per cell
VS.SHO.Fail.Other.
Cell
none
Soft
Handover
Measuremen
t per cell
([SHO.AttRLAddUESide]+
[SHO.AttRLDelUESide][SHO.SuccRLAddUESide][SHO.SuccRLDelUESide])[SHO.FailRLAddUESide.Cfg
Unsup][SHO.FailRLAddUESide.Isr][SHO.FailRLAddUESide.Inv
Cfg][SHO.FailRLAddUESide.No
Reply]
VS.HHO.InterFreq.F
ailOut
none
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut]
VS.HHO.InterFreq.
AttOut
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgUnsupp
times
Hard
Handover
Measuremen
t per cell
777
PRS
Performance Report Reference
Subrep
ort
Name
CS
InterRA
T HHO
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreqO
ut.PyhChFail
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.FailUSR
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CellUpdt
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.CfgInvalid
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreqO
ut.NoReply
times
Hard
Handover
Measuremen
t per cell
VS.HHO.InterFreq.F
ailOther
none
Hard
Handover
Measuremen
t per cell
([VS.HHO.InterFreq.AttOut][VS.HHO.InterFreq.SuccOut])[VS.HHO.InterFreqOut.CfgU
nsupp][VS.HHO.InterFreqOut.PyhC
hFail][VS.HHO.InterFreqOut.FailUSR][VS.HHO.InterFreqOut.CellUpdt][VS.HHO.InterFreqOut.CfgIn
valid][VS.HHO.InterFreqOut.NoRe
ply]
VS.IRATHO.FailOutCS
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutCS][IRATHO.SuccOutCS]
IRATHO.AttOutCS
times
InterRAT
Handover
Measuremen
t per cell
778
PRS
Performance Report Reference
Subrep
ort
Name
PS
InterRA
T HHO
FAIL
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
IRATHO.FailOutCS
.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutCS
.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tCS.Other
none
InterRAT
Handover
Measuremen
t per cell
([IRATHO.AttOutCS][IRATHO.SuccOutCS])[IRATHO.FailOutCS.CfgUnsupp][IRATHO.FailOutCS.PhyChFail]
VS.IRATHO.FailOu
tPSUTRAN.Cell
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN]
IRATHO.AttOutPSUTRAN
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.CfgUnsupp
times
InterRAT
Handover
Measuremen
t per cell
IRATHO.FailOutPS
UTRAN.PhyChFail
times
InterRAT
Handover
Measuremen
t per cell
VS.IRATHO.FailOu
tPSUTRAN.Other
none
InterRAT
Handover
Measuremen
t per cell
[IRATHO.AttOutPSUTRAN][IRATHO.SuccOutPSUTRAN][IRATHO.FailOutPSUTRAN.
CfgUnsupp][IRATHO.FailOutPSUTRAN.
PhyChFail]
779
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Hot
Traffic
Cell
(AMR
Ctrl
DL12.2)
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
780
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
781
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
782
PRS
Performance Report Reference
Subrep
ort
Name
Hot
Traffic
Cell(RB
DLInterP
S 384)
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
783
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
784
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
785
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanC
hThroughput.TotalMBps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/({GP}*
{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
HSDPA
Access
Issue 02 (2011-08-25)
786
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
HO
VS.HSDPA.ServCel
lChg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
787
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
788
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Issue 02 (2011-08-25)
789
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
RAB Fail
VS.HSDPA.RAB.Fa
ilEstab
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.AttEstab][VS.HSDPA.RAB.SuccEstab]
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
VS.HSDPA.MeanC
hThroughput.NEW
none
HSDPA
Measuremen
t per cell
({8}*
[VS.HSDPA.MeanChThrough
put.TotalBytes]/
([VS.HSDPA.MeanChThroug
hput.Times]))
VS.HSDPA.MeanC
hThroughput.TotalBytes
byte
HSDPA
Measuremen
t per cell
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MACD.
Mean.Cell
numb
er
HSDPA
Measuremen
t per cell
HSDPA
RAB
Abnorm
Rel
Issue 02 (2011-08-25)
790
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
HHO
IntraFRe
quest Fail
VS.HSDPA.ServCel
lChg.HHO.IntraFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutIntraFreq][VS.HSDPA.HHO.SuccOutIntraFreq]
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.HHO.InterFreq
.NoChR.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.AttOutInterFreq][VS.HSDPA.HHO.SuccOutInterFreq]
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH.Att][VS.HSDPA.ChR.HSDSCHto
DCH]
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att][VS.HSDPA.ChR.DCHtoHSD
SCH]
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.SHO.Fail
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.At
tOut][VS.HSDPA.SHO.CellChg.Su
ccOut]
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
HSDPA
HHO
InterFRe
quest Fail
HSDPA
HSDSC
HtoDCH
Fail
HSDPA
DCHtoH
SDSCH
Fail
HSDPA
ServCell
Chg Fail
Issue 02 (2011-08-25)
791
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 02 (2011-08-25)
792
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.SHO.Se
rvCellChg.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]
793
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
RAB
FailEstab
VS.HSUPA.RAB.Fa
ilEstab
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.AttEstab][VS.HSUPA.RAB.SuccEstab]
794
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
HSUPA
RAB
Abnorm
Release
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
HSUPA
EDCH
SHO Fail
VS.HSUPA.EDCH.
SHO.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Att]
[VS.HSUPA.EDCH.SHO.Suc
c]
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Att][VS.HSUPA.SHO.ServCellCh
g.Succ]
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Fail
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Att][VS.HSUPA.HHO.InterFreq.
NoChR.Succ]
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
HSUPA
SHO
ServCell
Chg Fail
HSUPA
HHO
InterFRe
quest
NoChR
Fail
Issue 02 (2011-08-25)
795
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.UL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSUPAPSLoad.
ULThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
796
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
797
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
798
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 02 (2011-08-25)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
799
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
*{100.00}
800
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
801
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.3Soft2Softer]*
{3}+[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
802
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC]
*{100.00}
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to PS
IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUT
RAN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
803
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
VS.Abnorm.Rel.CS.
AMR.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.AMR.Iur
Link
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.AMR.IurLink]+
[VS.Abnorm.Rel.CS.AMR.Iur
Link]
VS.RAB.Loss.CS.A
MR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.AMR.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.Abnorm.Rel.CS.
Conv.RB.64.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.VP.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.Conv.RB.
64.IurLink]+
[VS.Abnorm.Rel.CS.Conv.RB
.64.IurLink]
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
804
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.Abnorm.Rel.PS.I
urLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.IurLink]
VS.Rel.PS.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Norm.Rel.PS.CCH.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.IurLink]
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
805
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
Cong
Cell
TopN
RRC.FailConnEstab.
Cong
times
RRC
connection
reject
measurement
per cell
806
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.Rej.Power.
Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.UL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.DL.CE
.Cong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.Code.C
ong
times
RRC
connection
reject
measurement
per cell
VS.RRC.Rej.TNL.F
ail
times
RRC
connection
reject
measurement
per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
807
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.ULInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.LC.ULCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
VS.LC.DLCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
808
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RAB
Cong
Cell
TopN
VS.RAB.FailEstabP
S.Cong
none
Measuremen
t of PS RAB
assignment
failure per
cell
[VS.RAB.Block.PS.Bkg.0.32]
+[VS.RAB.Block.PS.Bkg.
144.384]+
[VS.RAB.Block.PS.Bkg.
32.64]+
[VS.RAB.Block.PS.Bkg.
64.144]+
[VS.RAB.Block.PS.Conv.
0.32]+[VS.RAB.Block.PS.Int.
0.32]+[VS.RAB.Block.PS.Int.
144.384]+
[VS.RAB.Block.PS.Int.32.64]
+[VS.RAB.Block.PS.Int.
64.144]+
[VS.RAB.Block.PS.Str.0.32]+
[VS.RAB.Block.PS.Str.
144.384]+
[VS.RAB.Block.PS.Str.32.64]
+[VS.RAB.Block.PS.Str.
64.144]+
[VS.RAB.BlockPS.BkgMor38
4]+[VS.RAB.BlockPS.ConvMor32]+
[VS.RAB.BlockPS.StrMor384
]+[VS.RAB.BlockPS.IntMor384]
VS.RAB.FailEstPs.P
ower.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
Code.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
ULCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.RAB.FailEstPs.
DLCE.Cong
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
809
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.FailEstPS.
TNL
numb
er
Measuremen
t of PS RAB
assignment
failure per
cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.ULInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
810
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.LC.ULCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
VS.LC.DLCreditUse
d.CELL
none
Measuremen
t related to
Algorithm
per cell
RRC.FailConnEstab.
Cong
times
RRC
connection
reject
measurement
per cell
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Issue 02 (2011-08-25)
811
PRS
Performance Report Reference
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
AMR
TopN
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.ULInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.ULInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.ULInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.ULInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
812
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
UCell
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VIP Cell
VS.Call.Drop.Cell
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.CS.RF]+
[VS.RAB.Loss.CS.Abnorm])+
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])
VS.RRC.SuccConn
Estab.Cell.Rate
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.sum]/
[VS.RRC.AttConnEstab.Cell]
*{100.00}
813
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HHO.InterFreq.
Out.Cell.Rate
Hard
Handover
Measuremen
t per cell
[VS.HHO.InterFreq.SuccOut]/
[VS.HHO.InterFreq.AttOut]*
{100.00}
VS.MeanTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSInt.Tx
byte
Traffic
Measuremen
t per cell
VS.MAC.SRNCIub
BytesPSBkg.Tx
byte
Traffic
Measuremen
t per cell
VS.MaxRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MinRTWP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.MaxTCP
dBm
Cell TX and
RX Power
Measuremen
t per cell
VS.AMR.Ctrl.DL12.
2
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLConvCS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
64
numb
er
Measuremen
t of RB
Procedure
per cell
814
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
128
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
144
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RB.DLInterPS.
384
numb
er
Measuremen
t of RB
Procedure
per cell
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.SuccRBSetup.Ce
ll.Rate
Measuremen
t of RB
Procedure
per cell
[VS.SuccRBSetup]/
[VS.AttRBSetup]*{100.00}
VS.IRATHO.SuccO
utCS.Cell.Rate
InterRAT
Handover
Measuremen
t per cell
[IRATHO.SuccOutCS]/
[IRATHO.AttOutCS]*
{100.00}
815
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.AMR.Call.D
rop.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]/
([VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R])*{100.00}
VS.CS.VP.Call.Dro
p.Cell.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]/
([VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64])*{100.00}
VS.PS.Call.Drop.Ce
ll.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm])/
([VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm])*
{100.00}
VS.PCH.Utilization.
Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesPC
H.Tx]/
([VS.CRNC.IUB.PCH.Bandwidth]*{GP}*{60})*{100.00}
VS.FACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesFA
CH.Tx]/
([VS.CRNC.IUB.FACH.Band
width]*{GP}*{60})*{100.00}
VS.RACH.Utilizatio
n.Cell.Rate
Traffic
Measuremen
t per cell
[VS.MAC.CRNCIubBytesRA
CH.Rx]/
([VS.CRNC.IUB.RACH.Band
width]*{GP}*{60})*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
816
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CDR
Report
VS.RAB.SucEstCS
Conv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.Loss.CS.A
MR.RNC
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
VS.AMR.Call.Drop.
RNC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.AMR.RNC
]/
[VS.RAB.SucEstCSConv0.32.
RNC]*{100.00}
VS.RAB.SucEstCS
Conv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.Loss.CS.C
onv64K.RNC
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
817
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.VP.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.Conv64K.
RNC]/
[VS.RAB.SucEstCSConv32.6
4.RNC]*{100.00}
VS.RAB.SuccEstPS.
RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
([RAB.SuccEstabPSNoQueui
ng.Bgrd]+
[RAB.SuccEstabPSQueuing.B
grd])+
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSQueuing.C
onv])+
([RAB.SuccEstabPSNoQueui
ng.Intact]+
[RAB.SuccEstabPSQueuing.I
ntact])+
([RAB.SuccEstabPSQueuing.
Strm]+
[RAB.SuccEstabPSNoQueuin
g.Strm])
VS.PS.Call.Drop.R
NC
none
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.PS.RF.RNC]+
[VS.RAB.Loss.PS.Abnorm.R
NC]
818
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
(([VS.RAB.Loss.PS.RF.RNC]
+
[VS.RAB.Loss.PS.Abnorm.R
NC]))/
(([RAB.SuccEstabPSNoQueui
ng.Bgrd]+
[RAB.SuccEstabPSQueuing.B
grd])+
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSQueuing.C
onv])+
([RAB.SuccEstabPSNoQueui
ng.Intact]+
[RAB.SuccEstabPSQueuing.I
ntact])+
([RAB.SuccEstabPSQueuing.
Strm]+
[RAB.SuccEstabPSNoQueuin
g.Strm]))*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
21.6.2 HO Report
Report Type
Simple Report
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
819
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HO
Report
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC]
*{100.00}
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
820
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SRELOC.AttPre
p.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.SRELOC.SuccPr
ep.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.SRELOC.SuccPr
ep.IRHOCS.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.SRELOC.SuccPrep.IRHOCS]/
[VS.SRELOC.AttPrep.IRHOCS]*{100.00}
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to PS
IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUT
RAN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
VS.IRATHO.EvalP
SOutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
VS.IRATHO.SuccPr
epPSOutUTRAN.Ra
te
Measuremen
t related to PS
IRA
handover per
RNC
[VS.IRATHO.AttPSOutUTR
AN.RNC]/
[VS.IRATHO.EvalPSOutUTR
AN.RNC]*{100.00}
821
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanC
hThroughput.TotalMBps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/({GP}*
{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
HSDPA
Access
Issue 02 (2011-08-25)
822
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
HO
VS.HSDPA.ServCel
lChg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
823
PRS
Performance Report Reference
Subrep
ort
Name
HSDPA
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
824
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
825
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 02 (2011-08-25)
826
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
CDR
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
827
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PAGE
Report
VS.RANAP.Paging.
Att.IdleUE
times
Measuremen
t related to
Paging per
RNC
VS.RANAP.Paging.
Succ.IdleUE
times
Measuremen
t related to
Paging per
RNC
VS.RANAP.Paging.
Succ.IdleUE.Rate
Measuremen
t related to
Paging per
RNC
[VS.RANAP.Paging.Succ.Idle
UE]/
[VS.RANAP.Paging.Att.IdleU
E]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
828
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RAB
Report
VS.RAB.AttEstCSC
onv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.SucEstCS
Conv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv0.32.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv0.32.
RNC]/
[VS.RAB.AttEstCSConv0.32.
RNC]*{100.00}
VS.RAB.AttEstCSC
onv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.SucEstCS
Conv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv32.64.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv32.6
4.RNC]/
[VS.RAB.AttEstCSConv32.64
.RNC]*{100.00}
RAB.AttEstabPS.Intact
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
829
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstPSI
nt.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC]
VS.RAB.SucEstPSI
nt.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC])/
[RAB.AttEstabPS.Intact]*
{100.00}
RAB.AttEstabPS.Bg
rd
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
VS.RAB.SucEstPSB
kg.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC]
830
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstPSB
kg.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC])/
[RAB.AttEstabPS.Bgrd]*
{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
831
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RCC
Report
VS.RRC.AttConnEs
tab.Other
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.CellR
es]+
[VS.RRC.AttConnEstab.Reg]
+[VS.RRC.AttConnEstab.Detach]
VS.RRC.SuccConn
Estab.Other
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]+
[VS.RRC.SuccConnEstab.Reg
]+
[VS.RRC.SuccConnEstab.Detach]
VS.RRC.SuccConn
Estab.Rate.Other
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.E
mg]+
[VS.RRC.SuccConnEstab.Cell
Res]+
[VS.RRC.SuccConnEstab.Reg
]+
[VS.RRC.SuccConnEstab.Detach]+
[VS.RRC.SuccConnEstab.Unknown])/
([VS.RRC.AttConnEstab.Emg
]+
[VS.RRC.AttConnEstab.CellR
es]+
[VS.RRC.AttConnEstab.Reg]
+[VS.RRC.AttConnEstab.Detach]+
[VS.RRC.AttConnEstab.Unknown])*{100.00}
VS.RRC.AttConnEs
tab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgConv]+
[VS.RRC.AttConnEstab.Trm
Conv]
VS.RRC.SuccConn
Estab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Conv]+
[VS.RRC.SuccConnEstab.Tr
mConv]
832
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Conv.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gConv]+
[VS.RRC.SuccConnEstab.Tr
mConv])/
([VS.RRC.AttConnEstab.OrgConv]+
[VS.RRC.AttConnEstab.Trm
Conv])*{100.00}
VS.RRC.AttConnEs
tab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.Trm
Bkg]
VS.RRC.SuccConn
Estab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Bkg.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gBkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Org
Bkg]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.TrmI
nt]
VS.RRC.SuccConn
Estab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.OrgInt]+
[VS.RRC.SuccConnEstab.Tr
mInt]
VS.RRC.SuccConn
Estab.Int.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gInt]+
[VS.RRC.SuccConnEstab.Tr
mInt])/
([VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.TrmI
nt])*{100.00}
833
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Org
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgConv]+
[VS.RRC.AttConnEstab.OrgS
tr]+
[VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.OrgSubs]
VS.RRC.SuccConn
Estab.Org
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Conv]+
[VS.RRC.SuccConnEstab.Org
Str]+
[VS.RRC.SuccConnEstab.OrgInt]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Org
Subs]
VS.RRC.SuccConn
Estab.Org.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gConv]+
[VS.RRC.SuccConnEstab.Org
Str]+
[VS.RRC.SuccConnEstab.OrgInt]+
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Org
Subs])/
([VS.RRC.AttConnEstab.OrgConv]+
[VS.RRC.AttConnEstab.OrgS
tr]+
[VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.OrgSubs])*{100.00}
834
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]
VS.RRC.SuccConn
Estab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Trm.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.Reg
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.Reg
times
RRC
connection
setup
measurement
per RNC
835
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Reg.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Reg
]/
[VS.RRC.AttConnEstab.Reg]
*{100.00}
VS.RRC.AttConnEs
tab.CellRes
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.CellRes
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.CellRes.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]/
[VS.RRC.AttConnEstab.CellR
es]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
836
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.UL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSUPAPSLoad.
ULThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
837
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
838
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 02 (2011-08-25)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
839
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
*{100.00}
840
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
841
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.3Soft2Softer]*
{3}+[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
842
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC]
*{100.00}
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to PS
IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUT
RAN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
843
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
VS.Abnorm.Rel.CS.
AMR.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.AMR.Iur
Link
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.AMR.IurLink]+
[VS.Abnorm.Rel.CS.AMR.Iur
Link]
VS.RAB.Loss.CS.A
MR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.AMR.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.Abnorm.Rel.CS.
Conv.RB.64.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.VP.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.Conv.RB.
64.IurLink]+
[VS.Abnorm.Rel.CS.Conv.RB
.64.IurLink]
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
844
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.Abnorm.Rel.PS.I
urLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.IurLink]
VS.Rel.PS.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Norm.Rel.PS.CCH.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.IurLink]
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
845
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Monthly
BH
Report
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
846
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
847
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Report
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLInterPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
848
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RB.DLBkgPS.
128.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
144.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.RB.DLBkgPS.
384.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Issue 02 (2011-08-25)
849
PRS
Performance Report Reference
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CDR
RAB.SuccEstabCS
none
Measuremen
t of CS RAB
assignment
setup per
RNC
([RAB.SuccEstabCSNoQueui
ng.Conv]+
[RAB.SuccEstabCSQueuing.
Conv])+
([RAB.SuccEstabCSNoQueui
ng.Strm]+
[RAB.SuccEstabCSQueuing.S
trm])
VS.CS.Call.Drop.R
NC
none
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC]
VS.CS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
([VS.RAB.Loss.CS.Abnorm.R
NC]+
[VS.RAB.Loss.CS.RF.RNC])/
(([RAB.SuccEstabCSNoQueui
ng.Conv]+
[RAB.SuccEstabCSQueuing.
Conv])+
([RAB.SuccEstabCSNoQueui
ng.Strm]+
[RAB.SuccEstabCSQueuing.S
trm]))*{100.00}
VS.RAB.SuccEstPS.
RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
([RAB.SuccEstabPSNoQueui
ng.Bgrd]+
[RAB.SuccEstabPSQueuing.B
grd])+
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSQueuing.C
onv])+
([RAB.SuccEstabPSNoQueui
ng.Intact]+
[RAB.SuccEstabPSQueuing.I
ntact])+
([RAB.SuccEstabPSQueuing.
Strm]+
[RAB.SuccEstabPSNoQueuin
g.Strm])
850
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.Call.Drop.R
NC
none
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
[VS.RAB.Loss.PS.RF.RNC]+
[VS.RAB.Loss.PS.Abnorm.R
NC]
VS.PS.Call.Drop.R
NC.Rate
Measuremen
t of RAB
release
triggered by
UTRAN per
RNC
(([VS.RAB.Loss.PS.RF.RNC]
+
[VS.RAB.Loss.PS.Abnorm.R
NC]))/
(([RAB.SuccEstabPSNoQueui
ng.Bgrd]+
[RAB.SuccEstabPSQueuing.B
grd])+
([RAB.SuccEstabPSNoQueui
ng.Conv]+
[RAB.SuccEstabPSQueuing.C
onv])+
([RAB.SuccEstabPSNoQueui
ng.Intact]+
[RAB.SuccEstabPSQueuing.I
ntact])+
([RAB.SuccEstabPSQueuing.
Strm]+
[RAB.SuccEstabPSNoQueuin
g.Strm]))*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Issue 02 (2011-08-25)
851
PRS
Performance Report Reference
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
Traffic
VS.HSDPA.MeanC
hThroughput.TotalMBytes
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.MeanChThrough
put.TotalBytes]/({1024}*
{1024})
VS.HSDPA.UE.Mea
n.Cell
numb
er
HSDPA
Measuremen
t per cell
VS.HSDPA.MeanC
hThroughput.TotalMBps
none
HSDPA
Measuremen
t per cell
([VS.HSDPA.MeanChThroug
hput.TotalBytes]*{8.0}/
({1024.0}*{1024.0}))/({GP}*
{60})
VS.HSDPA.RAB.Su
ccEstab.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.SuccEstab]/[VS.HSDPA.RAB.AttEstab]*{100.00}
VS.HSDPA.RAB.Su
ccEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.RAB.At
tEstab
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ServCel
lChg.Succ.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.SHO.CellChg.Su
ccOut]/
[VS.HSDPA.SHO.CellChg.At
tOut]*{100.00}
VS.HSDPA.SHO.Ce
llChg.SuccOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.SHO.Ce
llChg.AttOut
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
traFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutIntraFreq]/
[VS.HSDPA.HHO.AttOutIntraFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutIntraFreq
times
HSDPA
Measuremen
t per cell
HSDPA
Access
HSDPA
HO
Issue 02 (2011-08-25)
852
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPA.HHO.At
tOutIntraFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.In
terFreq.NoChR.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.HHO.SuccOutInterFreq]/
[VS.HSDPA.HHO.AttOutInterFreq]*{100.00}
VS.HSDPA.HHO.S
uccOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.HHO.At
tOutInterFreq
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Succ.
Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.HSDSCHto
DCH]/
[VS.HSDPA.ChR.HSDSCHto
DCH.Att]*{100.00}
VS.HSDPA.ChR.HS
DSCHtoDCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.HS
DSCHtoDCH.Att
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Succ
.Rate
HSDPA
Measuremen
t per cell
[VS.HSDPA.ChR.DCHtoHSD
SCH]/
[VS.HSDPA.ChR.DCHtoHSD
SCH.Att]*{100.00}
VS.HSDPA.ChR.D
CHtoHSDSCH
times
HSDPA
Measuremen
t per cell
VS.HSDPA.ChR.D
CHtoHSDSCH.Att
times
HSDPA
Measuremen
t per cell
853
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSDPA
CDR
VS.HSDPA.RAB.A
bnormRel.Rate
HSDPA
Measuremen
t per cell
([VS.HSDPA.RAB.Loss.Abn
orm.NonRF]+
[VS.HSDPA.RAB.Loss.RF])/
([VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq])*{100.00}
VS.HSDPA.RAB.A
bnormRel
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]
VS.HSDPA.RAB.Re
l
none
HSDPA
Measuremen
t per cell
[VS.HSDPA.RAB.Loss.InActivity]+
[VS.HSDPA.RAB.Loss.Abno
rm.NonRF]+
[VS.HSDPA.RAB.Loss.RF]+
[VS.HSDPA.RAB.Loss.Norm
]+
[VS.HSDPA.ChR.HSDSCHto
DCH]+
[VS.HSDPA.ChR.HSDSCHto
FACH]+
[VS.HSDPA.HHO.H2D.SuccOutIntraFreq]+
[VS.HSDPA.HHO.H2D.SuccOutInterFreq]
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
854
PRS
Performance Report Reference
NE Type
RNC
Object Type
RNC
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
HSUPA
Access
VS.HSUPA.RAB.Su
ccEstab.Rate
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.SuccEstab]/[VS.HSUPA.RAB.AttEstab]*{100.00}
VS.HSUPA.RAB.Su
ccEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.At
tEstab
numb
er
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.EDCH.SHO.Suc
c]/
[VS.HSUPA.EDCH.SHO.Att]
*{100.00}
VS.HSUPA.EDCH.
SHO.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.EDCH.
SHO.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.SHO.Se
rvCellChg.Succ.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.SHO.ServCellCh
g.Succ]/
[VS.HSUPA.SHO.ServCellCh
g.Att]*{100.00}
VS.HSUPA.SHO.Se
rvCellChg.Succ
times
HSUPA
Measuremen
t per cell
HSUPA
HO
Issue 02 (2011-08-25)
855
PRS
Performance Report Reference
Subrep
ort
Name
HSUPA
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSUPA.SHO.Se
rvCellChg.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
.Ratio
HSUPA
Measuremen
t per cell
[VS.HSUPA.HHO.InterFreq.
NoChR.Succ]/
[VS.HSUPA.HHO.InterFreq.
NoChR.Att]*{100.00}
VS.HSUPA.HHO.In
terFreq.NoChR.Succ
times
HSUPA
Measuremen
t per cell
VS.HSUPA.HHO.In
terFreq.NoChR.Att
times
HSUPA
Measuremen
t per cell
VS.HSUPA.RAB.A
bnormRel.Rate
HSUPA
Measuremen
t per cell
([VS.HSUPA.RAB.Loss.Abnorm])/
([VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ])*{100.00}
VS.HSUPA.RAB.A
bnormRel
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]
VS.HSUPA.RAB.Re
lease
none
HSUPA
Measuremen
t per cell
[VS.HSUPA.RAB.Loss.Abnorm]+
[VS.HSUPA.RAB.Loss.Norm
]+
[VS.HSUPA.ChR.IntraCell.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.IntraFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.InterFreq.E
DCHtoDCH.Succ]+
[VS.HSUPA.ChR.EDCHtoFA
CH.Succ]
856
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
InterRAT HO
Report
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.SRELOC.AttPre
p.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
857
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SRELOC.SuccPr
ep.IRHOCS
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.SRELOC.SuccPr
ep.IRHOCS.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.SRELOC.SuccPrep.IRHOCS]/
[VS.SRELOC.AttPrep.IRHOCS]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
PAGE
Report
VS.RANAP.Paging.
Att.IdleUE
times
Measuremen
t related to
Paging per
RNC
858
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RANAP.Paging.
Succ.IdleUE
times
Measuremen
t related to
Paging per
RNC
VS.RANAP.Paging.
Succ.IdleUE.Rate
Measuremen
t related to
Paging per
RNC
[VS.RANAP.Paging.Succ.Idle
UE]/
[VS.RANAP.Paging.Att.IdleU
E]*{100.00}
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RAB
Report
VS.RAB.AttEstCSC
onv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
859
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstCS
Conv0.32.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv0.32.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv0.32.
RNC]/
[VS.RAB.AttEstCSConv0.32.
RNC]*{100.00}
VS.RAB.AttEstCSC
onv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
VS.RAB.SucEstCS
Conv32.64.RNC
numb
er
Measuremen
t of CS RAB
assignment
setup per
RNC
RAB.SuccEstabCSC
onv32.64.RNC.Rate
Measuremen
t of CS RAB
assignment
setup per
RNC
[VS.RAB.SucEstCSConv32.6
4.RNC]/
[VS.RAB.AttEstCSConv32.64
.RNC]*{100.00}
RAB.AttEstabPS.Intact
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
VS.RAB.SucEstPSI
nt.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC]
860
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SucEstPSI
nt.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSInt0.32.R
NC]+
[VS.RAB.SucEstPSInt32.64.R
NC]+
[VS.RAB.SucEstPSInt64.144.
RNC]+
[VS.RAB.SucEstPSInt144384
.RNC]+
[VS.RAB.SucEstPSIntMor38
4.RNC])/
[RAB.AttEstabPS.Intact]*
{100.00}
RAB.AttEstabPS.Bg
rd
numb
er
Measuremen
t of PS RAB
assignment
setup per
RNC
VS.RAB.SucEstPSB
kg.RNC
none
Measuremen
t of PS RAB
assignment
setup per
RNC
[VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC]
VS.RAB.SucEstPSB
kg.RNC.Rate
Measuremen
t of PS RAB
assignment
setup per
RNC
([VS.RAB.SucEstPSBkg0.32.
RNC]+
[VS.RAB.SucEstPSBkg32.64.
RNC]+
[VS.RAB.SucEstPSBkg64.14
4.RNC]+
[VS.RAB.SucEstPSBkg14438
4.RNC]+
[VS.RAB.SucEstPSBkgMor3
84.RNC])/
[RAB.AttEstabPS.Bgrd]*
{100.00}
861
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
VS.AMR.RB.DL.
12.2
numb
er
Measuremen
t related to
AMR service
VS.RB.DLConvCS.
64.RNC
numb
er
Measuremen
t of RB
Procedure
per RNC
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.UL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSUPAPSLoad.
ULThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
862
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
863
PRS
Performance Report Reference
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Access
VS.RRC.SuccConn
Estab.Service.Cell.R
ate
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig])/
([RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
864
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig])*{100.00}
VS.RRC.SuccConn
Estab.Service.Cell
Issue 02 (2011-08-25)
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.OgConvCall]+
[RRC.SuccConnEstab.OrgStrCall]+
[RRC.SuccConnEstab.OrgItrCall]+
[RRC.SuccConnEstab.OrgBk
gCall]+
[RRC.SuccConnEstab.OrgSubCall]+
[RRC.SuccConnEstab.TmCon
vCall]+
[RRC.SuccConnEstab.TmStr
Call]+
[RRC.SuccConnEstab.TmItrCall]+
[RRC.SuccConnEstab.TmBkg
Call]+
[RRC.SuccConnEstab.EmgCall]+
[RRC.SuccConnEstab.Unkown]+
[RRC.SuccConnEstab.OgHhP
rSig]+
[RRC.SuccConnEstab.OgLwP
rSig]+
[RRC.SuccConnEstab.CallReEst]+
[RRC.SuccConnEstab.TmHhP
rSig]+
[RRC.SuccConnEstab.TmLw
PrSig]
865
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.AttConnEs
tab.Service.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.OrgConvCall]+
[RRC.AttConnEstab.OrgStrCall]+
[RRC.AttConnEstab.OrgInterCall]+
[RRC.AttConnEstab.OrgBkgCall]+
[RRC.AttConnEstab.OgSubCall]+
[RRC.AttConnEstab.TmConv
Call]+
[RRC.AttConnEstab.TmStrCa
ll]+
[RRC.AttConnEstab.TmInterCall]+
[RRC.AttConnEstab.TmBkgC
all]+
[RRC.AttConnEstab.EmgCall]+
[RRC.AttConnEstab.Unknown]+
[RRC.AttConnEstab.OgHhPrSig]+
[RRC.AttConnEstab.OgLwPrSig]+
[RRC.AttConnEstab.CallReEst]+
[RRC.AttConnEstab.TmHhPr
Sig]+
[RRC.AttConnEstab.TmLwPr
Sig]
VS.RRC.SuccConn
Estab.Other.Cell.Rat
e
RRC
connection
setup
measurement
per cell
([RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach])/
([RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach])
*{100.00}
866
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.SuccConnEstab.IRATCelRes]+
[RRC.SuccConnEstab.IRATC
CO]+
[RRC.SuccConnEstab.Reg]+
[RRC.SuccConnEstab.Detach]
VS.RRC.AttConnEs
tab.Other.Cell
none
RRC
connection
setup
measurement
per cell
[RRC.AttConnEstab.IRATCelRes]+
[RRC.AttConnEstab.IRATCCO]+
[RRC.AttConnEstab.Reg]+
[RRC.AttConnEstab.Detach]
VS.RAB.SuccEstab
CS.AMR.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstab.AMR]/
[VS.RAB.AttEstab.AMR]*
{100.00}
VS.RAB.SuccEstab.
AMR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstab.A
MR
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.SuccEstab
CS.Conv.
64.Cell.Rate
Measuremen
t of CS RAB
assignment
setup per cell
[VS.RAB.SuccEstCS.Conv.
64]/[VS.RAB.AttEstCS.Conv.
64]*{100.00}
VS.RAB.SuccEstCS
.Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
VS.RAB.AttEstCS.
Conv.64
numb
er
Measuremen
t of CS RAB
assignment
setup per cell
867
PRS
Performance Report Reference
Subrep
ort
Name
HO
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RAB.SuccEstab
PS.Cell.Rate
Measuremen
t of PS RAB
assignment
setup per cell
([VS.RAB.SuccEstabPS.Conv
]+[VS.RAB.SuccEstabPS.Str]
+[VS.RAB.SuccEstabPS.Inter]+
[VS.RAB.SuccEstabPS.Bkg])/
([VS.RAB.AttEstabPS.Conv]
+[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg])*
{100.00}
VS.RAB.SuccEstPS.
Cell
none
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.SuccEstabPS.Conv]
+[VS.RAB.SuccEstabPS.Str]+
[VS.RAB.SuccEstabPS.Inter]
+[VS.RAB.SuccEstabPS.Bkg]
VS.RAB.AttEstabPS
.Cell
numb
er
Measuremen
t of PS RAB
assignment
setup per cell
[VS.RAB.AttEstabPS.Conv]+
[VS.RAB.AttEstabPS.Str]+
[VS.RAB.AttEstabPS.Inter]+
[VS.RAB.AttEstabPS.Bkg]
VS.SHO.Factor.RL
none
Soft
Handover
Measuremen
t per RNC
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]*{2}+
[VS.SHO.AS.2Soft]*{2}+
[VS.SHO.AS.3Softer]*{3}+
[VS.SHO.AS.3Soft]*{3}+
[VS.SHO.AS.3Soft2Softer]*
{3}+[VS.SHO.AS.4]*{4}+
[VS.SHO.AS.5]*{5}+
[VS.SHO.AS.6]*{6})/
([VS.SHO.AS.1]+
[VS.SHO.AS.2Softer]+
[VS.SHO.AS.2Soft]+
[VS.SHO.AS.3Softer]+
[VS.SHO.AS.3Soft]+
[VS.SHO.AS.3Soft2Softer]+
[VS.SHO.AS.4]+
[VS.SHO.AS.5]+
[VS.SHO.AS.6])-{1}
VS.SHO.Succ.Rate
Soft
Handover
Measuremen
t per RNC
[VS.SHO.Succ]/
[VS.SHO.Att.RNC]*{100.00}
VS.SHO.Succ
times
Soft
Handover
Measuremen
t per RNC
868
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.SHO.Att.RNC
times
Soft
Handover
Measuremen
t per RNC
VS.InterFreq.HHO.S
ucc.RNC.Rate
Hard
Handover
Measuremen
t per RNC
[VS.HHO.InterFreq.Succ.RN
C]/
[VS.HHO.InterFreq.Att.RNC]
*{100.00}
VS.HHO.InterFreq.S
ucc.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.HHO.InterFreq.
Att.RNC
times
Hard
Handover
Measuremen
t per RNC
VS.IRATHO.SuccC
SOut.RNC.Rate
Measuremen
t related to
CS IRA
handover per
RNC
[VS.IRATHO.SuccCSOut.RN
C]/
[VS.IRATHO.AttCSOut.RNC
]*{100.00}
VS.IRATHO.SuccC
SOut.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.AttCS
Out.RNC
times
Measuremen
t related to
CS IRA
handover per
RNC
VS.IRATHO.SuccP
SOutUTRAN.RNC.
Rate
Measuremen
t related to PS
IRA
handover per
RNC
[VS.IRATHO.SuccPSOutUT
RAN.RNC]/
[VS.IRATHO.AttPSOutUTR
AN.RNC]*{100.00}
VS.IRATHO.SuccP
SOutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
869
PRS
Performance Report Reference
Subrep
ort
Name
CDR
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.IRATHO.AttPS
OutUTRAN.RNC
times
Measuremen
t related to PS
IRA
handover per
RNC
VS.Abnorm.Rel.CS.
AMR.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.AMR.Iur
Link
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.AMR.IurLink]+
[VS.Abnorm.Rel.CS.AMR.Iur
Link]
VS.RAB.Loss.CS.A
MR
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
VS.CS.AMR.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.AMR]+
[VS.RAB.Loss.CS.Norm.AM
R]
VS.Abnorm.Rel.CS.
Conv.RB.64.IurLink
times
Measuremen
t related to
SRNC in Iur
interface
VS.Rel.CS.VP.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.CS.Conv.RB.
64.IurLink]+
[VS.Abnorm.Rel.CS.Conv.RB
.64.IurLink]
VS.RAB.Loss.CS.C
onv64K
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
870
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.CS.VP.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.CS.Conv64K]
+[VS.Norm.Rel.CS.Conv.RB.
64]
VS.Abnorm.Rel.PS.I
urLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.IurLink]
VS.Rel.PS.IurLink
none
Measuremen
t related to
SRNC in Iur
interface
[VS.Norm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Norm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Norm.Rel.PS.CCH.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
0.32.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
32.64.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
64.144.IurLink]+
[VS.Abnorm.Rel.PS.BE.RB.
144.384.IurLink]+
[VS.Abnorm.Rel.PS.CCH.IurLink]
VS.PS.Call.Drop.Ce
ll
numb
er
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]
871
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.PS.RAB.Release
none
Measuremen
t of RAB
release
triggered by
UTRAN per
cell
[VS.RAB.Loss.PS.RF]+
[VS.RAB.Loss.PS.Abnorm]+
[VS.RAB.Loss.PS.Norm]
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
RRC
Report
VS.RRC.AttConnEstab
times
RRC
connection
setup
measurement
per RNC
872
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.FailConEst
.RNC
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SetupConnEstab
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConnEstab
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab]/
[VS.RRC.AttConnEstab]*
{100.00}
VS.RRC.AttConnEs
tab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgConv]+
[VS.RRC.AttConnEstab.Trm
Conv]
VS.RRC.SuccConn
Estab.Conv
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Conv]+
[VS.RRC.SuccConnEstab.Tr
mConv]
VS.RRC.SuccConn
Estab.Conv.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gConv]+
[VS.RRC.SuccConnEstab.Tr
mConv])/
([VS.RRC.AttConnEstab.OrgConv]+
[VS.RRC.AttConnEstab.Trm
Conv])*{100.00}
VS.RRC.AttConnEs
tab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgB
kg]+
[VS.RRC.AttConnEstab.Trm
Bkg]
873
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Bkg
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Org
Bkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Bkg.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gBkg]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Org
Bkg]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.TrmI
nt]
VS.RRC.SuccConn
Estab.Int
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.OrgInt]+
[VS.RRC.SuccConnEstab.Tr
mInt]
VS.RRC.SuccConn
Estab.Int.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Or
gInt]+
[VS.RRC.SuccConnEstab.Tr
mInt])/
([VS.RRC.AttConnEstab.OrgInt]+
[VS.RRC.AttConnEstab.TrmI
nt])*{100.00}
VS.RRC.AttConnEs
tab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg]
874
PRS
Performance Report Reference
Subrep
ort
Name
Issue 02 (2011-08-25)
Counter
Coun
ter
Unit
Function
Subset
Formula
VS.RRC.SuccConn
Estab.Trm
none
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg]
VS.RRC.SuccConn
Estab.Trm.Rate
RRC
connection
setup
measurement
per RNC
([VS.RRC.SuccConnEstab.Tr
mConv]+
[VS.RRC.SuccConnEstab.Tr
mStr]+
[VS.RRC.SuccConnEstab.Tr
mInt]+
[VS.RRC.SuccConnEstab.Tr
mBkg])/
([VS.RRC.AttConnEstab.Trm
Conv]+
[VS.RRC.AttConnEstab.TrmS
tr]+
[VS.RRC.AttConnEstab.TrmI
nt]+
[VS.RRC.AttConnEstab.Trm
Bkg])*{100.00}
VS.RRC.AttConnEs
tab.CellRes
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.CellRes
times
RRC
connection
setup
measurement
per RNC
VS.RRC.SuccConn
Estab.CellRes.Rate
RRC
connection
setup
measurement
per RNC
[VS.RRC.SuccConnEstab.Cell
Res]/
[VS.RRC.AttConnEstab.CellR
es]*{100.00}
875
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Weekly
BH
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.MBMSPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
876
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
RNC
Object Type
RNC
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Traffic
Weekly
VS.CSLoad.Erlang.
Equiv.RNC
none
Traffic
Measuremen
t per RNC
VS.R99PSLoad.DL
Thruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.HSDPAPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
VS.MBMSPSLoad.
DLThruput.RNC
kbit/s
Traffic
Measuremen
t per RNC
877
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
878
PRS
Performance Report Reference
22
Issue 02 (2011-08-25)
879
PRS
Performance Report Reference
NE Type
SGSN
Object Type
USN and SGSN
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Gb mode
mobility
manage
ment
Gb mode GPRS
attach request times
times
Gb mode
attach
Gb mode GPRS
attach success ratio
Gb mode
attach
Gb mode intra-SGSN
RAU request times
times
Gb mode
intra-SGSN
RAU
Gb mode intra-SGSN
RAU success ratio
Gb mode
intra-SGSN
RAU
Gb mode inter-SGSN
RAU request times
times
Gb mode
inter-SGSN
RAU
Gb mode inter-RAU
success ratio
Gb mode
inter-SGSN
RAU
Gb mode MS init
PDP context act
times
Gb mode
PDP context
activation
Gb mode MS init
PDP context act
success ratio
Gb mode
PDP context
activation
Gb mode
session
manage
ment
Issue 02 (2011-08-25)
880
PRS
Performance Report Reference
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Gb mode
resource
Gb mode average
attached users
numb
er
Gb mode
radio
resource
numb
er
Gb mode SM
resource
Gb mode packet
paging request times
times
Gb mode
paging
Gb mode packet
paging success ratio
Gb mode
paging
Gb mode
paging
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SGSN
Object Type
USN and SGSN
Issue 02 (2011-08-25)
881
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Iu mode
mobility
manage
ment
times
Iu mode
attach
Iu mode
attach
Iu mode intra-SGSN
RAU request times
times
Iu mode
intra-SGSN
RAU
Iu mode intra-RAU
success ratio
Iu mode
intra-SGSN
RAU
Iu mode inter-SGSN
RAU request times
times
Iu mode
inter-SGSN
RAU
Iu mode inter-RAU
success ratio
Iu mode
inter-SGSN
RAU
Iu mode
session
manage
ment
times
Iu mode PDP
context
activation
Iu mode PDP
context
activation
Iu mode
resource
Iu mode average
attached users
numb
er
Iu mode radio
resource
Iu mode average
active PDP context
numb
er
Iu mode SM
resource
Iu mode packet
paging request times
times
Iu mode
paging
Iu mode packet
paging success ratio
Iu mode
paging
Iu mode
paging
Issue 02 (2011-08-25)
882
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SGSN
Object Type
Board
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
CPU
resource
times
System
resource
CPU overload
duration
System
resource
CPU congestion
times
times
System
resource
CPU congestion
duration
System
resource
Average CPU
occupation ratio(%)
System
resource
883
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SGSN
Object Type
MTP3 link
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
MTP3
link
Erl
MTP3 link
Erl
MTP3 link
MTP3 link
congestion
times
MTP3 link
MTP3 link
MTP3 link
884
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SGSN
Object Type
USN and SGSN
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
Data
transfer
kiloby
tes
GTPU bearer
kiloby
tes
GTPU bearer
Downlink data
kbytes sent to
SNDCP
kiloby
tes
GTPU bearer
kiloby
tes
GTPU bearer
Downlink data
kbytes sent to RNC
kiloby
tes
GTPU bearer
kiloby
tes
GTPU bearer
885
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
886
PRS
Performance Report Reference
23
Issue 02 (2011-08-25)
887
PRS
Performance Report Reference
NE Type
SG7000
Object Type
M3UA Link
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Bytes of receieved
message in one m3ua
association
byte
M3UA LINK
Bytes of sent
message in one m3ua
association
byte
M3UA LINK
Duration of m3ua
association
availability
M3UA LINK
Duration of m3ua
association
unavailability
M3UA LINK
Number of receieved
message in one m3ua
association
times
M3UA LINK
Number of sent
message in one m3ua
association
numb
er
M3UA LINK
888
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SG7000
Object Type
M3UA Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
LinkSet
Duration of m3ua
association set
unavailability
M3UA
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
889
PRS
Performance Report Reference
NE Type
SG7000
Object Type
Link
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINK
Duration of SL
unavailability(for
any reason)
LINK
Duration of link in
the In-service state
LINK
numb
er
LINK
numb
er
LINK
numb
er
LINK
Number of message
signal units received
numb
er
LINK
Number of message
signal units
transmitted
numb
er
LINK
Number of negative
ack. Received
times
LINK
Number of signal
units received in
error
times
LINK
SL alignment or
proving failure
numb
er
LINK
890
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SG7000
Object Type
M3UA ASSOAS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
ASSOAS
Duration of adjacent
AS inaccessible
M3UA
ASSOAS
M3UA
ASSOAS
Message discarded
due to a routing data
error
numb
er
M3UA
ASSOAS
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
891
PRS
Performance Report Reference
NE Type
SG7000
Object Type
SG7000NE
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCCP
globle
Total messages
requiring global title
translation
numb
er
SCCP global
UDT messages
received
numb
er
SCCP global
numb
er
SCCP global
UDTS messages
received
numb
er
SCCP global
numb
er
SCCP global
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
892
PRS
Performance Report Reference
NE Type
SG7000
Object Type
Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINKSE
T
Duration of
unavailability of
signalling linkset
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SG7000
Object Type
DSP
Issue 02 (2011-08-25)
893
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Duration of adjacent
SP inaccessible
DSP
numb
er
DSP
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
894
PRS
Performance Report Reference
24
Issue 02 (2011-08-25)
895
PRS
Performance Report Reference
NE Type
SPS
Object Type
M3UA Link
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
Link
Bytes of receieved
message in one m3ua
association
byte
M3UA LINK
Bytes of sent
message in one m3ua
association
byte
M3UA LINK
Duration of m3ua
association
availability
M3UA LINK
Duration of m3ua
association
unavailability
M3UA LINK
Number of receieved
message in one m3ua
association
times
M3UA LINK
Number of sent
message in one m3ua
association
numb
er
M3UA LINK
896
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SPS
Object Type
SPSNE
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
SCCP
globle
Total messages
requiring global title
translation
numb
er
SCCP global
UDT messages
received
numb
er
SCCP global
numb
er
SCCP global
UDTS messages
received
numb
er
SCCP global
numb
er
SCCP global
897
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SPS
Object Type
M3UA Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
LinkSet
Duration of m3ua
association set
unavailability
M3UA
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
898
PRS
Performance Report Reference
NE Type
SPS
Object Type
Link
Subreport Information
Issue 02 (2011-08-25)
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINK
Duration of SL
unavailability(for
any reason)
LINK
Duration of link in
the In-service state
LINK
numb
er
LINK
numb
er
LINK
numb
er
LINK
Number of message
signal units received
numb
er
LINK
Number of message
signal units
transmitted
numb
er
LINK
Number of negative
ack. Received
times
LINK
Number of signal
units received in
error
times
LINK
SL alignment or
proving failure
numb
er
LINK
899
PRS
Performance Report Reference
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SPS
Object Type
M3UA ASSOAS
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
M3UA
ASSOAS
Duration of adjacent
AS inaccessible
M3UA
ASSOAS
M3UA
ASSOAS
Message discarded
due to a routing data
error
numb
er
M3UA
ASSOAS
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
900
PRS
Performance Report Reference
NE Type
SPS
Object Type
Link Set
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
LINKSE
T
Duration of
unavailability of
signalling linkset
LINKSET
NOTE
To obtain the information about the previous counters, use the following methods:
l
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
NE Type
SPS
Object Type
DSP
Issue 02 (2011-08-25)
901
PRS
Performance Report Reference
Subreport Information
Subrep
ort
Name
Counter
Coun
ter
Unit
Function
Subset
Formula
DSP
Duration of adjacent
SP inaccessible
DSP
numb
er
DSP
NOTE
To obtain the information about the previous counters, use the following methods:
Issue 02 (2011-08-25)
Checking the counter type. You can open KPI Management to check whether those counters are
system counters or custom counters.
For custom counters, you can find the corresponding expressions in the KPI Management window,
and then read thedescription of each system counter in NE Reference Information in PRS Online
Help.
902