Professional Documents
Culture Documents
of Questions : 8]
SEAT No. :
P1836
[4165] - 504
M.E. (Mechanical) (Heat power Engg.)
MEASUREMENT TECHNIQUES & DATA ANALYSIS
SECTION - I
Q1) a) Explain classification of measuring instruments.
b) Explain static characteristics of an instrument.
[8]
[8]
[8]
b) Find the most likely production corresponding to a rain fall 40'' from the
following data.
[8]
Rain fall
Production
Average
30''
500 kg
Standard deviation
5''
100 kg
Co - efficient of correlation = 0.8
Q3) a) What are properties of regression co - efficients?
[6]
b) Obtain the lines of regression from the data given.
[12]
X :
4
5
6
8 11
Y : 12 10 8
7
5
Verify that the co-efficient of correlation is geometric mean of two
co - efficients of regression.
P.T.O.
Q4) a) Explain the working of ultrasonic flow meter stating its merits & demerits.
[8]
b) A copper resistor at 20C is used to indicate the temperature of bearing,
of machine. What resistance should not be exceeded if maximum bearing
temp. is not to exceed 150C. The resistance temperature co-efficient of
copper is 0.00393 /C at 20C.
[8]
SECTION - II
Q5) a) Explain the principle construction and working of temperature measuring
device of a furnace.
[8]
b) A Laser Dopper anemometer employs a He - ne laser , O= 632.8 nm to
measure velocity of flow at a point in a dusty gas. A 160 mm focussing
lens having T = 12 is used to operate LDA in dual beam mode. Find the
velocity of flow if the average Doppler shift in frequency was found to
be 1.62 MHz.
[8]
Q6) a) Explain the working double beam - U - V spectrophotometer.
[8]
[8]
[4165]-504
[18]