You are on page 1of 6

Information

System

PM: KPI Requirement Specification

15.5 Inter System Handover between GSM and UMTS


15.5.1 Outgoing Inter System Handover Success Rate
Long name:

(a)
(b)
(c)
(d)

Outgoing Inter System Handover Attempts


Outgoing Inter System Handover Successes
Outgoing Inter System Handover Success Rate
Outgoing Inter System Handover Success Rate per cause

Short name:

(a)
(b)
(c)
(d)

InterSysOtgHOAtt
InterSysOtgHOSucc
InterSysOtgHOSuccRate
InterSysOtgHOSuccRateC

Description:

These indicators will give you the rate and number of successful outgoing Inter
System Handovers.
The indicators on the HO success rate are provided as an aggregation over all HO
causes and are provided in addition separated per HO cause value

Formula:

11
InterSysOt
gHOAtt[i]

ATOISHDO [c]i
(a)
c 1
(b)

(c)

(d)

11
InterSysOtgHOSucc[i] SUOISHDO [c]
i
c 1
InterSysOtgHOSucc[i]
InterSysOtgHOSuccRat e[i]
InterSysOtgHOAtt[i]
InterSysOtgHOSuccRateC[i, c]

SUOISHDO[c]i
ATOISHDO[c]i

with i for the number of the neighbourcell relation (i=0..63)


with c for the cause number:
c=1
uplink quality
c=2
downlink quality
c=3
uplink strength
c=4
downlink strength
c=5
distance
c=6
better cell
c=7
directed retry
c=8
forced handover due to pre-emption
c=9
forced handover due to O&M intervention
c=10
sufficient UMTS coverage
c=11
forced handover due to DTM
Used param.: ATOISHDO [all], SUOISHDO[all]
Elem. Object: Neighbourcell
Unit:

None

Remarks:

None

119

Information
System

PM: KPI Requirement Specification

15.5.2 Outgoing Inter System Handover Failure Rate


Long name:

(a) Outgoing Inter System Handover Failure


(b) Outgoing Inter System Handover Failure Rate
(c) Outgoing Inter System Handover Failure Rate per cause

Short name:

(a) InterSysOtgHOFail
(b) InterSysOtgFailRate
(c) InterSysOtgFailRateC

Description:

These indicators will give you the rate and number of Outgoing Inter System
Handover Failures by meaning of unsuccessful Handovers without loss of MS
connection because of reversion to old cell.
The indicators on the HO failure rate are provided as an aggregation over all HO
causes and are provided in addition separated per HO cause value

Formula:

11

(a) InterSysOtgHOFail[i] UNOISHDO [c]

c 1

InterSysOtgHOFail[i]
InterSysOtgHOAtt[i]

(b)

InterSysOtgHOFailRate[i]

(c)

InterSysOtgHOFailRateC[i, c]

UNOISHDO[ c]i
ATOISHDO[c]i

with i for the number of the neighbourcell relation (i=0..63)


with c for the cause number:
c=1
uplink quality
c=2
downlink quality
c=3
uplink strength
c=4
downlink strength
c=5
distance
c=6
better cell
c=7
directed retry
c=8
forced handover due to pre-emption
c=9
forced handover due to O&M intervention
c=10
sufficient UMTS coverage
c=11
forced handover due to DTM
Used param.: UNOISHDO[all], ATOISHDO[all], InterSysOtgHOAtt[all] (15.5.1(a))
Elem. Object: Neighbourcell
Unit:

None

Remarks:

None

120

Information
System

PM: KPI Requirement Specification

15.5.3 Outgoing Inter System Handover Drop Rate


Long name:

(a) Outgoing Inter System Handover Drops


(b) Outgoing Inter System Handover Drop Rate
(c) Outgoing Inter System Handover Drop Rate per cause

Short name:

(a) InterSysOtgHODrop
(b) InterSysOtgHODropRate
(c) InterSysOtgHODropRateC

Description:

These indicators will give you the rate and number of Outgoing Inter System
Handover Drops per neighbour cell by meaning of unsuccessful Handovers with
loss of MS connection.
The indicators on the HO drop rate are provided as an aggregation over all HO
causes and are provided in addition separated per HO cause value.

Formula:

(a) InterSysOtgHODrop InterSysOtgHOAtt - InterSysOtgHOSucc - InterSysOtgHOFail

(b)

InterSysOtgHODropRate

(c) InterSysOtgHODropRateC[nic]

InterSysOtgHODrop
InterSysOtgHOAtt
(ATOISHDO - SUOISHDO - UNOISHDO)[c]
ATOISHDO[c]

with i for the number of the neighbourcell relation (i=0..63)


with c for the cause number:
c=1
uplink quality
c=2
downlink quality
c=3
uplink strength
c=4
downlink strength
c=5
distance
c=6
better cell
c=7
directed retry
c=8
forced handover due to pre-emption
c=9
forced handover due to O&M intervention
c=10
sufficient UMTS coverage
c=11
forced Handover due to DTM
Used param.: ATOISHDO[all], SUOISHDO[all], UNOISHDO[all], InterSysOtgHOAtt[all]
(15.5.1(a)), InterSYSHOSucc[all] (15.5.1(b)), InterSYSHOFail[all] (15.5.2(a))
Elem. Object: Neighbourcell
Unit:

None

Remarks:

Systematic error: call release during HO is included in the formula

121

Information
System

PM: KPI Requirement Specification

15.5.4 Outgoing Inter System Handover Distribution


Long name:

(a) Outgoing Inter Cell Inter System Handover Distribution


(b) Outgoing Imperative Inter Cell Inter System Handover Rate

Short name:

(a) InterSysOtgHODist
(b) ImpInterSysOtgHORate

Description:

These indicators will give you the Inter Cell Inter System Handover Distribution for
analyzing the reason for started Inter Cell Inter System Handovers.
Imperative handovers are not whished but reflect possible problems in the network
topology

Formula:
(a)

InterSysOtgHODist[i, c]

ATOISHDO[c]i
InterSysOtgHOAtt[i]
5

(b)

ImpInterSysOtgHORate[i]

ATOISHDO[c]
c 1

InterSysOtgHOAtt[i]

with i for the number of the neighbourcell relation (i=0..63)


with c for the cause number:
c=1
uplink quality
c=2
downlink quality
c=3
uplink strength
c=4
downlink strength
c=5
distance
c=6
better cell
c=7
directed retry
c=8
forced handover due to pre-emption
c=9
forced handover due to O&M intervention
c=10
sufficient UMTS coverage
c=11
forced handover due to DTM
Used param.: ATOISHDO[all], InterSysOtgHOAtt[all] (15.5.1(a))
Elem. Object: Neighbourcell
Unit:
Remarks:

122

None

Information
System

PM: KPI Requirement Specification

15.5.5 Incoming Inter System Handover Success Rate


Long name:

(a) Successful Incoming Inter System HO from UMTS


(b) Attempted Incoming Inter System HO from UMTS
(c) Success Rate for Incoming Inter System HO from UMTS

Short name:

(a) InterSysIncHOSucc
(b) InterSysIncHOAtt
(c) InterSysIncHOSuccRate

Description:

These indicators will give you the rate and number of successful Incoming Inter
System HO from UMTS.

Formula:

(a)

InterSysIncHOSucc SUIISHDO [1]

(b)

InterSysIncHOAtt RQIISHDO[1]

(c)

InterSysIncHOSuccRate

Used param.:

InterSysIncHOSucc
InterSysIncHOAtt

Elem. Object:

RQIISHDO[1]: Number of requested incoming intersystem handovers


SUIISHDO[1]: Number of successful incoming intersystem handovers
BSC

Unit:

None

Remarks:

123

Information
System

PM: KPI Requirement Specification

15.6 Other Handover Performance Indicators


15.6.1 Handovers per Erlanghour
Long name:

(a) Handover per Erlanghour

Short name:

(a) HOperErlh

Description:

This indicator will give you the ratio between successful Handovers and the traffic
in Erlanghour per cell.
Aggregation over all neighbors of the observed cell and all HO causes is
performed

Formula:

(a) HOperErlh =
n

SINTHITA[1..18] SINTHINT[1..12] SUINBHDO[1..11] i


i 0

SUOISHDO[1..11]
j 0

MEBUSTCH 1..10

60
Granularit y

with n for the number of GSM neighbourcell relation (n=0..31)


with m for the number of UMTS neighbourcell relation (n=0..63)
i represents the adjacent relationship between the observed and i-th neighbour
GSM cell
j represents the adjacent relationship between the observed and j-th neighbour
UMTS cell
MEBUSTCH[1,2] are defined for standard cell, MEBUSTCH[3..6] are defined for
the concentric cell and MEBUSTCH[7..10] are defined for the extended cell
Used param.: SINTHITA[1..18], SINTHINT [1..12], SUINBHDO[1..11], SUOISHDO[1..11],
MEBUSTCH[1..10],, Granularity in minutes
Elem. Object: Cell
Unit:

None

Remarks:

SDCCH handovers are also incremented in these counters used for this
formula and that fact can lead to systematic errors.
Intersystem HO to UMTS are considered

15.6.2 Handovers per Call Rate


Long name:

(a) Handovers per Call Rate

Short name:

(a) HOperCallRatio

Description:

This indicator will give you the ratio between Handovers and successful Call
Setups per cell.
Aggregation over all neighbors of the observed cell and all HO causes is
performed

124

You might also like