You are on page 1of 20

Umschlag_Series4100_dat-sw_en_5213-9557-22_v0400.

indd 1

Data Sheet | 04.00

Secure Communications

R&SM3SR Series4100
Software Defined Radios
Specifications

13.07.2011 11:00:50

Version 04.00, July 2011

CONTENTS
Specifications.................................................................................................................................................................. 3
General data ...........................................................................................................................................................................................3
Transmitter data......................................................................................................................................................................................4
Receiver data..........................................................................................................................................................................................5
Radio data with options...........................................................................................................................................................................7

R&S FK4120/4140 digitally tuned 20 dB/40 dB RF selection (option)................................................................................................7

R&S VK4150/VK4190 500 W/1000 W power amplifier with receiver input protection (option) ..........................................................8

R&S GS4114S LINK software (option for operation with tactical data links)......................................................................................8

R&S GS4117S CE conformity mark (option) ......................................................................................................................................8

R&S GS4156S split site (option).........................................................................................................................................................9


Audio and mechanical data...................................................................................................................................................................10
Power supplies......................................................................................................................................................................................12

Ordering information .................................................................................................................................................... 14

R&S EK4100A/D receiver ....................................................................................................................................................................14

R&S XK4115A/D transceiver................................................................................................................................................................15


500 W and 1000 W transceiver systems ..............................................................................................................................................16
Auxiliary equipment...............................................................................................................................................................................17

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

Specifications
Specifications apply under the following conditions: 30 minutes warm-up time at ambient temperature, specified environmental conditions
met, calibration cycle adhered to, and all internal automatic adjustments performed.
Data without tolerance limits is not binding.
The radio systems described are hardware- and software-configurable. The system delivered has the configuration as confirmed in the
order.

General data
Frequency range
Resolution
Frequency stability (OCXO)
External reference frequency input
Preset pages
Channel memory

Test (built-in test facility)

Remote control interfaces


HF parameters
Acoustic noise

TX
RX

1.5 MHz to 29.999999 MHz


10 kHz to 29.999999 MHz
1 Hz
9
100 s
1 10
7
per year
1 10
0 dBm 3 dB, 50
1/5/10 MHz
100
user-programmable
400 half-duplex channels
fixed-programmed
1839 ITU channels
additional channels for ALE
100 half-duplex channels
failure localization down to module level
PBIT (power-on BIT)
CBIT (continuous BIT)
IBIT (initiated BIT)
RS-232-C, Ethernet (IEEE 802.3)
in line with STANAG 4203, annexes B + C
installation in operating room (distance = 1 m)

R&S EK4100A
45 dBA

R&S XK4115A/D
55 dBA
500 W/1000 W transceiver system
65 dBA

Waveforms
Classes of emission
EPM (optional)

powerful HF slow hopping wave-form with


embedded COMSEC

ALE 2G (second-generation automatic link


establishment, optional)
ALE 3G (third-generation automatic link
establishment, optional)
HF modem (optional)

in line with FED-STD-1045/1046/1049,


MIL-STD-188-141B, App. A + B
in line with STANAG 4538, FLSU (fast link
setup), CLC (circuit link control)
in line with STANAG 4285,
STANAG 4539 (incl. STANAG 4415),
MIL-STD-188-110B, section 5.3 + App. C,
STANAG 4529, STANAG 4481,
STANAG 5065, MIL-STD-188-110B
App. F
in line with STANAG 4538, LDL (low
latency data link protocol), HDL (high rate
data link protocol)
in line with STANAG 5511,
MIL-STD-188-203-1A,
STANAG 5522 (fixed frequency)

Data link protocols (ARQ, optional)

Data link capability (optional)

MTBF
Conditions

R&S EK4100A/D basic receiver

R&S XK4115A/D basic transceiver

R&S GX4100A/D basic exciter

R&S VK4150 500 W power amplifier

R&S VK4190 1000 W power amplifier

R&S IN4150 500 W power supply

R&S IN4150 500 W power supply

R&S IN4150 500 W power supply

R&S IN4190 1000 W power supply

R&S IN4190 1000 W power supply

R&S BV4190 transformer

R&S IN4000A power supply

R&S GB4000C local control panel

A1A, A3E, H3E, B8E, B7D, F1D, F1B,


F3E, J3E (LSB, USB), J2D (LSB, USB)

R&S SECOM-H

in line with MIL-HDBK-217F, +21 C, GB = ground benign, NS = naval sheltered


without options
GB 52000 h, NS 10500 h
without options
GB 50000 h, NS 9100 h
without options
GB 63000 h, NS 11000 h
6119.9002.03/.13
GB 82000 h, NS 20500 h
6120.1501.03/.13
GB 74000 h, NS 18000 h
6120.0705.02
GB 122000 h, NS 44000 h
6120.0705.03
GB 121000 h, NS 43000 h
6120.0705.12
GB 122000 h, NS 45000 h
6120.2708.02
GB 117000 h, NS 41000 h
6120.2708.03
GB 116000 h, NS 41000 h
6120.7700.08
GB 397000 h, NS 211000 h
6105.5800.02
GB 100000 h, NS 40000 h
6105.6006.03/.06
GB 696000 h, NS 126000 h

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

R&S FK4120 digitally tuned RF


selection

R&S FK4140 digitally tuned RF


selection

R&S GS4102 NMEA (DSC) interface


MTTR

6119.5007.02

GB 162000 h, NS 26000 h

6119.6003.02

GB 125000 h, NS 19600 h

6119.3504.02
all units and models

GB 248000 h, NS 44000 h
< 30 min

Transmitter data

All transmitter data refers to a load impedance of 50 ; without the R&S FK4120/FK4140 digitally tuned RF selection.
RF output power
150 W transceiver
1

500 W transceiver system


1
1000 W transceiver system
RF emergency output power
(500 W and 1000 W systems)
Duty cycle
Power step tolerance
150 W transceiver

500 W transceiver system

1000 W transceiver system

VSWR power reduction


150 W transceiver

500 W transceiver system

1000 W transceiver system

Settling time after power level changes


150 W transceiver
500 W transceiver system
1000 W transceiver system
RX/TX switching time

Third-order intermodulation (TOI)


150 W transceiver
500 W transceiver system
1000 W transceiver system
Carrier noise level

constant envelope modes


non-constant envelope modes
all modes
all modes
battery operation

continuous transmission
150 W (PEP), 100 W (PEP/CW)
50 W (PEP/CW)
20 W (PEP/CW)
10 W (PEP/CW)
10 mW (PEP/CW)
500 W
250 W
100 W
50 W
20 W
OFF/10 mW
1000 W
500 W
250 W
100 W
50 W
OFF/10 mW

+1.0/0.5 dB
1 dB
1 dB
1.5 dB
+3.7/2.7 dB
0.5 dB
1 dB
1 dB
1.5 dB
2 dB
no RF output on power amplifier
0.5 dB
0.5 dB
1 dB
1 dB
1.5 dB
no RF output on power amplifier

VSWR 1.5
VSWR 2.4
VSWR
VSWR 1.5
VSWR 2.0
VSWR
VSWR 1.5
VSWR 2.0
VSWR

100 W (PEP/CW)/150 W (PEP) 1.0 dB


100 W (PEP/CW) 1.0 dB
> 10 W (PEP/CW)
500 W (PEP/CW) 1.0 dB
400 W (PEP/CW) 1.0 dB
> 100 W (PEP/CW)
1000 W (PEP/CW) 1.0 dB
800 W (PEP/CW) 1.0 dB
> 100 W (PEP/CW)
< 50 ms
<1s
<1s

fixed frequency
RX TX
TX RX

10 ms
15 ms

32 dB below PEP
36 dB below PEP
36 dB below PEP
measured at maximum nominal output power in A1A
f0 1 kHz
110 dBc (1 Hz)
f0 30 kHz
135 dBc (1 Hz)
f0 5 %
145 dBc (1 Hz)
f0 10 %
150 dBc (1 Hz)

See section on R&SGS4117S for limitations.

100 W (CW) + 1.0/ 0.5 dB


150 W (PEP) + 1.0/ 0.5 dB
500 W 0.5 dB
1000 W 0.5 dB
100 W (CW) 1 dB

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

TX harmonics
150 W transceiver
500 W transceiver system
1000 W transceiver system
Carrier rejection
Sideband rejection
Spurious emissions

TX modulation bandwidth

Signal-to-noise ratio
Automatic level control (ALC)
Peak power to average power ratio
(PEP/PAVG)
Selective level control (option)

Voice compressor

at 100 W (CW)
at 500 W (CW)
at 1000 W (CW)
J3E
J3E
25 % of max. output power,
in line with MIL-STD-188-141B
fc 4 B to fc + 4 B
0.95 fc to fc 4 B
fc + 4 B to 1.05 fc
< 0.95 fc
> 1.05 fc
voice (J3E)
data (J2D/B7D)
J3E, H3E, in line with ITU-T (O.41/P53)

45 dBc
48 dBc
48 dBc
60 dB below PEP
60 dB below PEP
fc = center frequency of bandwidth (Hz)
B = TX modulation bandwidth (Hz)
40 dBc
60 dBc
60 dBc
80 dBc
80 dBc
passband 300 Hz to 3400 Hz
passband 300 Hz to 3050 Hz
50 dB below PEP, weighted

J2D and B7D


all other modes
available for 500 W and 1000 W power
amplifiers

adjustable in steps of 1 dB
adjusted automatically
fully digital narrowband measurement of
the forward and reflected power at the
operational frequency, recommended for
severe co-site conditions
compression ratio for voice signals:
> typ. 6 dB

J3E, A3E, H3E, F3E

Receiver data

All receiver data without the R&S FK4120/FK4140 digitally tuned RF selection and receiver input protection.
RX test signal generator source impedance: 50 . The receiver data is valid for the standalone receivers as well as for the receiving
part of the receiver/exciter and of the 150 W transceiver.
Input impedance
Antenna input level (max.)
Sensitivity (without preamplifier)
10 kHz to 15 kHz

15 kHz to 50 kHz

50 kHz to 100 kHz

100 kHz to 29.999999 MHz

Sensitivity (with preamplifier)


100 kHz to 29.999999 MHz

VSWR 3
operation, specs complied with
without damage

50
+7 dBm ( 1 V (VEMF))
+53 dBm ( 200 V (VEMF))

J3E (SSB), B = 1200 Hz


psophometric weighting filter (ITU-T),
SINAD = 10 dB
J3E (SSB), B = 1200 Hz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
J3E (SSB), B = 1200 Hz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
A1A (CW), B = 300 Hz
S/N = 10 dB
J3E (SSB), B = 2.7 kHz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
A3E (AM), B = 6.0 kHz, m = 70 %
psophometric weighting filter (ITU-T),
SINAD = 10 dB

typ. 98 V (VEMF) (73 dBm)

A1A (CW), B = 300 Hz


S/N = 10 dB
J3E (SSB), B = 2.7 kHz
psophometric weighting filter (ITU-T),
SINAD = 10 dB
A3E (AM), B = 6.0 kHz, m = 70 %
psophometric weighting filter (ITU-T),
SINAD = 10 dB

Noise figure (with/without preamplifier)

98 V (VEMF) (73 dBm)

9.8 V (VEMF) (93 dBm)

0.45 V (VEMF) (120 dBm)


0.8 V (VEMF) (115 dBm)

1.6 V (VEMF) (109 dBm)

0.2 V (VEMF) (127 dBm)


0.32 V (VEMF) (123 dBm)

0.7 V (VEMF) (116 dBm)

9 dB/18 dB

See section on R&SGS4117S for limitations.

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011


Oscillator reradiation at antenna input
Second-order intercept point (IP2)
Third-order intercept point (IP3)
Inband intermodulation

Image rejection
IF rejection
Sideband rejection (SSB)
Crossmodulation (without preamplifier)

Blocking (without preamplifier)

Desensitization (without preamplifier)

Internally generated spurious emissions

AGC range
BFO (beat frequency oscillator)
Passband tuning
Squelch
Automatic multinotch filter
Noise blanker
Mute
Receive bandwidths (3 dB)
F3E
A3E
H3E
B8E
B7D
J3E

without preamplifier, interfering signals of


2 0 dBm
without preamplifier, interfering signals of
2 0 dBm, f = 30 kHz
in line with MIL-STD-188-203-1A,
frequency of audio tones within
450 Hz to 3050 Hz,
interfering signals of 2 53 dBm

baud rates

IM3 40 dB (IP3 33 dBm)

useful signal level 1 mV (VEMF),


interfering signal level 4 V (VEMF),
interferer frequency f 30 kHz,
interferer modulation A3E,
modulation frequency 1 kHz,
modulation depth 30 %
3 dB reduction of audio level
useful signal level 2 mV (VEMF),
interfering signal level 5 V (VEMF),
interferer frequency f 30 kHz
SINAD 20 dB
psophometric weighting filter,
useful signal level 30 V (VEMF),
RX bandwidth 2700 Hz,
interfering signal level 100 mV (VEMF),
interferer frequency f = 30 kHz
in line with MIL-STD-188-141B
for 99 % of 3 kHz channels
112 dBm
for 0.8 % of 3 kHz channels
106 dBm
for 0.2 % of 3 kHz channels
> 106 dBm
no internally generated spurious outputs above 90 dBm
J3E, without preamplifier
3 dB output variation
for 1 V to 1 V (VEMF)
2 kHz in 10 Hz steps
2 kHz in 10 Hz steps
syllabic, RSSI, tone, RSSI + syllabic,
RSSI + tone
notch frequency 0 Hz to 3.4 kHz
attenuation of unwanted signals typ. 20 dB
types: FLASH, SPARK, ELECTRIC
background noise is attenuated by
FENCE, available for A3E/ H3E/ F3E/ J3E typ. > 10 dB for a predefined noise pattern
90 dB

shifts

+35 dBm

80 dB
90 dB
60 dB below PEP
10 % modulation transfer

J2D
A1A
F1D/F1B

10 V (VEMF) at 50
+60 dBm

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

6.0 kHz, 8.0 kHz


3.5 kHz to 8.0 kHz, 500 Hz steps
2.1/2.4/2.7/3.1 kHz
1.8 kHz to 3.1 kHz, 100 Hz steps
1.8 kHz to 3.1 kHz, 100 Hz steps
50 Hz to 250 Hz, 50 Hz steps
300 Hz to 3.1 kHz, 100 Hz steps
100 Hz to 3.1 kHz, 100 Hz steps
50 Hz to 250 Hz, 50 Hz steps
300 Hz to 3.1 kHz, 100 Hz steps
50 Bd, 75 Bd, 100 Bd, 150 Bd, 300 Bd,
600 Bd
42 Hz, 85 Hz, 170 Hz, 425 Hz

Version 04.00, July 2011

Radio data with options


R&SFK4120/4140 digitally tuned 20 dB/40 dB RF selection (option)
Digitally tuned RF selection
Frequency range

Stopband attenuation
At 10 % offset from operating
frequency
Input voltage protection
f 29.999999 MHz, Ri = 50 ,
without damage
Transmitter
Carrier noise level
measured at maximum nominal output
power in A1A; transmitter terminated
into 50
Receiver
Sensitivity
100 kHz to 29.999999 MHz,
SINAD = 10 dB,
psophometric weighting filter (ITU-T),
A1A: B = 300 Hz, J3E: B = 2.7 kHz
Second order intercept point (IP2)
With or without preamplifier,
measurement level 2 +10 dBm,
interfering signals: 5 % and 10 %
offset from operating frequency
Third order intercept point (IP3)
Without preamplifier, measurement
level 2 +10 dBm, interfering signals:
5 % and 10 % offset from operating
frequency
With preamplifier, measurement level
2 +10 dBm, interfering signals:
5 % and 10 % offset from operating
frequency
Without preamplifier, measurement
level 2 5 dBm, interfering signals:
f 30 kHz
Image rejection
IF rejection
Blocking
Without preamplifier,
useful signal level: 2 mV (VEMF),
interfering signal level: 10 V (VEMF),
f 5 % (f ref. to wanted signal)
Desensitization
Without preamplifier, useful signal
level 30 V (VEMF),
RX bandwidth: 2700 Hz,
interfering signal level: 315 mV or
1 V (VEMF),
f 5 % (f ref. to wanted signal)
(measurement without psophometric
weighting filter)
Max. input level (operation)

R&S FK4120
TX: 1.5 MHz to 29.999999 MHz
RX: 10 kHz to 29.999999 MHz
(lowpass filter for reception < 1.5 MHz)
20 dB

R&S FK4140
TX: 1.5 MHz to 29.999999 MHz
RX: 10 kHz to 29.999999 MHz
(lowpass filter for reception < 1.5 MHz)
40 dB

VAnt 200 V (VEMF)

VAnt 200 V (VEMF)

f0 1 kHz: 110 dBc (1 Hz)


f0 30 kHz: 135 dBc (1 Hz)
f0 10 %
< 155 dBc (1 Hz), f < 10 MHz
< 165 dBc (1 Hz), f > 10 MHz

f0 1 kHz: 110 dBc (1 Hz)


f0 30 kHz: 135 dBc (1 Hz)
f0 5 %
< 155 dBc (1 Hz), f < 10 MHz
< 165 dBc (1 Hz), f > 10 MHz

without preamplifier:
A1A < 0.8 V (VEMF) (115.0 dBm)
J3E < 1.32 V (VEMF) (110.6 dBm)
with preamplifier:
A1A < 0.48 V (VEMF) (119.4 dBm)
J3E < 0.91 V (VEMF) (113.8 dBm)

without preamplifier:
A1A < 1.0 V (VEMF) (113.0 dBm)
J3E < 1.8 V (VEMF) (107.9 dBm)
with preamplifier:
A1A < 0.68 V (VEMF) (116.4 dBm)
J3E < 1.22 V (VEMF) (111.3 dBm)

+80 dBm

+100 dBm

+50 dBm

+50 dBm

+32 dBm

+45 dBm

+27 dBm

+27 dBm

130 dB
110 dB
3 dB reduction of audio level

130 dB
130 dB
3 dB reduction of audio level

SINAD 20 dB
(interfering signal level: 315 mV)

SINAD 20 dB
(interfering signal level: 1 V)

typ. 6.3 V (VEMF)

typ. 6.3 V (VEMF)

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

R&SVK4150/VK4190 500 W/1000 W power amplifier with receiver input protection (option)
Input voltage protection (operation)
Sensitivity
100 kHz to 29.999999 MHz,
SINAD = 10 dB, psophometric
weighting filter (ITU-T)

f 29.999999 MHz, Ri = 0
VAnt 100 V (VRMS)
VAnt 10 V (VRMS)
f > 29.999999 MHz, Ri = 0
without preamplifier, without digitally tuned RF selection
A1A
< 110 dBm
J3E
< 105 dBm
H3E
< 96 dBm
A3E
< 99 dBm
with preamplifier, without digitally tuned RF selection
A1A
< 117 dBm
J3E
< 113 dBm
H3E
< 105 dBm
A3E
< 106 dBm

R&SGS4114S LINK software (option for operation with tactical data links)
Operating modes (D model only)

TX modulation bandwidth
TX group delay

RX/TX switching time

AGC attack time


Inband intermodulation

AF line input

AF line output

connection of DTS for LINK-11, LINK-Y, LINK-22


J2D
LINK-MULTI
LINK-SINGLE
LINK-Y MULTI
B7D
LINK-MULTI
LINK-SINGLE
LINK-Y MULTI
in line with MIL-STD-188-203-1A, operating mode J2D/B7D, 1.5 MHz to 29.999999 MHz
passband 300 Hz to 3050 Hz
2.75 kHz
in line with MIL-STD-188-203-1A, operating mode J2D/B7D, 1.5 MHz to 29.999999 MHz
500 Hz to 3050 Hz
< 3.5 ms
815 Hz to 3050 Hz
0.5 ms
in line with MIL-STD-188-203-1A
RX TX
7 ms
TX RX
23 ms
93 dBm to +7 dBm
13 ms
in line with MIL-STD-188-203-1A, frequency of audio tones within 450 Hz to 3050 Hz,
measurement level 2 53 dBm
IM3
40 dB
IP3
33 dBm
frequency response J2D/B7D (in line with MIL-STD-188-203-1A)
450 Hz to 3050 Hz
1 dB
300 Hz to 3050 Hz
1.5 dB
frequency response J2D/B7D (in line with MIL-STD-188-203-1A)
450 Hz to 3050 Hz
1 dB
300 Hz to 3050 Hz
1.5 dB

R&SGS4117S CE conformity mark (option)


CE conformity mark

R&S XK4115A/D basic transceiver

R&S GX4100A/D basic exciter

R&S VK4150 500 W power amplifier

R&S VK4190 1000 W power amplifier

R&S IN4150 500 W power supply


(model .02)

R&S IN4190 1000 W power supply


(model .02)

R&S EK4100A/D basic receiver

R&S IN4000A 150 W power supply

R&S GB4000C remote control unit

EN 300373-1 section 10.7 specifies


additional restrictions for the transmitters.

in line with EN 300373-1/-2/-3


with section 7.6 as restriction

For operation in line with EN61000-3-2,


see operating modes described in the
operating manual.

limitation for CE operation:


power reduction to < 400 W for
f < 4 MHz
reduction of TX bandwidth

These instruments already have the CE


conformity mark and therefore do not

require the R&S GS4117S option.

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

R&SGS4156S split site (option)


Split site system requirements for the customer IP network
Bandwidth

depending on operation mode, details


available on request
60 ms
15 ms
5
< 2 10 (4 packets/hour)

Delay
Jitter
Packet loss

Split site system specific values


Split site connection time
< 60 s
Split site specific group delay (additional
typ. 90 ms + network delay
internal radio delay)
Contact your local Rohde & Schwarz office for more details about split site specific parameters and split site design
considerations.

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

Audio and mechanical data


Audio data
AF microphone input (transceiver and exciter models only)
Level range
unbalanced, 600 , for dyn. microphones
Frequency response from line input to
3.1 kHz bandwidth selected,
antenna output
J3E modulation, 300 Hz to 3300 Hz
Harmonic distortion
1 kHz AF tone, F3E mode
1 kHz AF tone, J3E mode
AF line input (transceiver and exciter models only)
Level range
2 line input, balanced, 600
Frequency response from line input to
antenna output
Harmonic distortion
AF headset output
Output power
Frequency response from antenna
input to headset output
Harmonic distortion
AF line output
Level range
Frequency response from antenna
input to line output
Harmonic distortion
Internal loudspeaker
External loudspeaker output (rear panel)
Built-in interfaces
Front panel
Fill interface
Headset connector

Audio/PTT
TX/RX (antenna)

settable within approx. 10 dBm to


+10 dBm in 0.1 dB steps, 0 dBm (nom.)
1.5 dB

3100 Hz bandwidth selected,


J2D/J3E modulation, 300 Hz to 3300 Hz
1 kHz AF tone, F3E mode
1 kHz AF tone, J3E and J2D mode
nominal input power
nominal input power (model .02 only)
output power into 4
harmonic distortion, 1 kHz AF tone

control of external system components


RS-232-C, asynchronous,
synchronous operation prepared
RS-232-C
in line with IEEE 802.3

Fungus
Permissible altitude

Vibration (sinusoidal)
Vibration (random)

5 % at 0 dBm
1 % at 0 dBm

2 line output, balanced, 600

R&S XK4115A/D

R&S GX4100A/D

RX (antenna)
GPS (antenna)
Environmental data
Temperature ranges
Operating temperature range
Storage temperature range
Humidity

adjustable from approx. 8 dBm to


+6 dBm, 0 dBm (nom.)
1.5 dB

4 V (VRMS)
2.5 dB

Remote control and software download

5 % at 10 mV (VRMS)
1 % at 10 mV (VRMS)

into 300 load


3100 Hz bandwidth selected,
J3E modulation, 300 Hz to 3300 Hz
1 kHz AF tone into 300 load

connector for R&S GP3000 fillgun


connector 1
connector 2

Rear panel
External reference frequency
RCB serial interface (optical)
Data interface

10

3.1 kHz bandwidth selected,


J2D/J3E modulation, 300 Hz to 3300 Hz
1 kHz AF tone, F3E mode
1 kHz AF tone, J3E and J2D mode

0.3 mV to 10 mV (VRMS)
2.5 dB

5 % at 3 V (VRMS)

5 % at 0 dBm
1 % at 0 dBm
1W
0.3 W
> 1.5 W
5 % at 1 W

proprietary
NF-7
TRS 6.3 mm
BNC female
SC system
15-pin female, D-Sub
9-pin male, D-Sub
RJ-45 connector, 10BaseT
44-pin female, D-Sub
N female
BNC female
BNC female
TNC female

in line with MIL-STD-810F, method 501.4/502.4, EN 60068-2-1/2


proc. II
20 C to +55 C
proc. I
40 C to +70 C
in line with MIL-STD-810F, method 507.4
95 % relative humidity and variation of
temperature between +30 C to +55 C
in line with MIL-STD-810F, method 508.5 (in line with MIL-HDBK-454)
in line with MIL-STD-810F, method 500.4
proc. I, storage/air transport
10000 m above sea level
proc. II, operation
20 C to +55 C
1000 m above sea level
20 C to +35 C
3000 m above sea level
in line with MIL-STD-167-1, type 1
1.5 mm to 0.15 mm double amplitude and
4 Hz to 50 Hz, test period: 40 min/axis
in line with MIL-STD-810F, method 514.5
shipboard random vibration exposure:
4 Hz to 100 Hz at 0.03 g/Hz, test period:
20 min/axis

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011


Shock resistance
EMI/EMC

Electrical power system requirements


Electrical safety
International protection code

R&S EK4100A/D basic receiver

R&S XK4115A/D basic transceiver

R&S GX4100A/D basic exciter

R&S VK4150 500 W power amplifier

R&S VK4190 1000 W power amplifier

R&S IN4150 500 W power supply

R&S IN4190 1000 W power supply

R&S BV4190 transformer

R&S IN4000A 150 W power supply


Mechanical data
Dimensions

R&S EK4100A/D basic receiver

R&S XK4115A/D basic transceiver

R&S GX4100A/D basic exciter

R&S VK4150 500 W power amplifier

R&S VK4190 1000 W power amplifier


Additional space (depth)

R&S IN4150 500 W power supply

R&S IN4190 1000 W power supply

R&S BV4190 transformer

R&S IN4000A 150 W power supply


Additional space for rear cabling
Weight

R&S EK4100A/D basic receiver

R&S XK4115A/D basic transceiver

R&S GX4100A/D basic exciter

R&S VK4150 500 W power amplifier

R&S VK4190 1000 W power amplifier

R&S IN4150 500 W power supply

R&S IN4190 1000 W power supply

R&S BV4190 transformer

R&S IN4000A 150 W power supply


Color of front panel

in line with MIL-STD-810F, method 516.5,


proc. I, EN 60068-2-27
in line with MIL-STD-461E: CE102,
CS101, CS114, RE101, RE102, RS101,
RS103

for R&S IN41x0 model .03 and

R&S BV4190 only

crossover frequency 45 Hz, 40 g, 15 ms to


23 ms, 3 shocks per main axis (pos./neg.)

STANAG 1008, edition 8


MIL-STD-1399, section 300A
EN 60950-1, EN 60215-1
front panel/rest of device
IP32/IP20 in line with IEC 60529
IP32/IP20 in line with IEC 60529
IP32/IP20 in line with IEC 60529
IP20 in line with IEC 60529
IP20 in line with IEC 60529
IP20 in line with IEC 60529
IP20 in line with IEC 60529
IP20 in line with IEC 60529
IP32/IP20 in line with IEC 60529

W D H (Depth = distance between front panel and rear panel)


1 HU = 44 mm = 1.73 in
481 mm 481 mm 132 mm (3 HU),
19 in 19 in 5.19 in (3 HU)
481 mm 481 mm 132 mm (3 HU),
19 in 19 in 5.19 in (3 HU)
481 mm 481 mm 132 mm (3 HU),
19 in 19 in 5.19 in (3 HU)
481 mm 570 mm 264 mm (6 HU),
19 in 22.44 in 10.38 in (6 HU)
481 mm 570 mm 264 mm (6 HU),
19 in 22.44 in 10.38 in (6 HU)
for future power amplifier upgrade
max. 200 mm (7.87 in)
481 mm 570 mm 132 mm (3 HU),
19 in 22.44 in 5.19 in (3 HU)
481 mm 570 mm 132 mm (3 HU),
19 in 22.44 in 5.19 in (3 HU)
481 mm 570 mm 132 mm (3 HU),
19 in 22.44 in 5.19 in (3 HU)
481 mm 420 mm 44 mm (1 HU),
19 in 16.54 in 1.73 in (1 HU)
200 mm (7.87 in) recommended
without hardware options
without hardware options
without hardware options
without hardware options
without hardware options

max. 14 kg (30.86 lb)


max. 16.5 kg (36.38 lb)
max. 13 kg (28.65 lb)
max. 30 kg (66.13 lb)
max. 38 kg (83.76 lb)
max. 24 kg (52.91 lb)
max. 24 kg (52.91 lb)
max. 53 kg (116.85 lb)
max. 7.1 kg (15.65 lb)
RAL 7047

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

11

Version 04.00, July 2011

Power supplies

R&S EK4100A/D receiver


DC supply
AC supply
Input power consumption
Power protection

R&S XK4115A/D transceiver


DC supply
AC supply
Input power consumption
500 W transceiver system

R&S IN4150 power supply (model .02)

R&S IN4150 power supply (model .03)


to be used only in combination with an

R&S BV4190 transformer

R&S IN4150 power supply (model .12)

R&S IN4190 power supply (model .02)

Emergency operation of all power supply


models

R&S BV4190 transformer

specs complied with


permissible
embedded
without options
burst
surge

+28 V 1 V
+19 V to +31 V
90 V to 264 V, 50/60 Hz
max. 80 VA
in line with EN 61000-4-4
in line with EN 61000-4-5

specs complied with


permissible

with R&S IN4000A


without options, for operation with

R&S IN4000A

+28 V 1 V
+19 V to +31 V
3
90 V to 264 V, 47 to 63 Hz
max. 580 W, max. 675 VA

AC supply

230 V (1 phase + N)
208 V (, 3 phases) line-to-line
230 V (Y, 3 phases + N)
+10 %, 15 %, 47 Hz to 63 Hz

input voltage tolerance


input power consumption
1 phase
3 phases (Y)
3 phases ()
power factor correction (PFC)
1 phase
3 phases (Y)
3 phases ()
AC supply, galvanically isolated phases
input voltage tolerance
input power consumption
power factor correction (PFC)
DC supply
input voltage tolerance
input power consumption
AC supply
input voltage tolerance
input power consumption
power factor correction (PFC)
DC supply for battery operation

> 0.99
> 0.65
> 0.90

3 225 V from R&S BV4190


20 %, 47 Hz to 63 Hz
max. 2.5 kVA
0.99
220 V
10 %
max. 2.5 kVA
115 V (1 phase + N)
+10 %, 15 %, 47 Hz to 63 Hz
max. 2.5 kVA
0.99
24 V to 27.6 V

AC supply, , 3 phases
input voltage tolerance
input power consumption

440 V
20 %, 47 Hz to 63 Hz
max. 4.5 kVA

max. 2.5 kVA


max. 3.6 kVA
max. 3.0 kVA

For reduced voltage (< 100 V), ambient temperature may not exceed +50 C and output power may not exceed 700 W.

12

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

1000 W transceiver system

R&S IN4190 power supply (model .02)

R&S IN4190 power supply (model .03)


to be used only in combination with an

R&S BV4190 transformer


Emergency operation of all power supply
models

R&S BV4190 transformer

AC supply

input voltage tolerance


input power consumption
1 phase
3 phases (Y)
3 phases ()
power factor correction (PFC)
1 phase
3 phases (Y)
3 phases ()
AC supply, galvanically isolated phases
input voltage tolerance
input power consumption
power factor correction (PFC)
DC supply for battery operation
AC supply, , 3 phases
input voltage tolerance
input power consumption

230 V (1 phase + N)
208 V (, 3 phases) line-to-line
230 V (Y, 3 phases + N)
+10 %, 15 %, 47 Hz to 63 Hz
max. 4.5 kVA
max. 6.5 kVA
max. 5.0 kVA
> 0.99
> 0.65
> 0.90

3 225 V from R&S BV4190


20 %, 47 Hz to 63 Hz
max. 4.5 kVA
0.99
24 V to 27.6 V
440 V line-to-line
20 %, 47 Hz to 63 Hz
max. 4.5 kVA

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

13

Version 04.00, July 2011

Ordering information
R&SEK4100A/D receiver
Designation
Base units
VLF-HF Receiver, AC/DC, without local control panel and radio software, ruggedized model
Radio software
Software CD without export restriction
Software CD with export restriction
Hardware options
Local Control Panel (without audio, incl. software and LAN), ruggedized model
Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section
Digitally Tuned RF Selection, 40 dB, functional for transmitting and receiving section
NMEA (DSC) Interface, for connecting an external DSC controller (GMDSS)
Software options (option keys)
ALE-2G (FED-STD-1045/1046/1049)
ALE-2G (FED-STD-1045/1046/1049), STANAG 4538/ALE-3G (FLSU, LP, xDL, ALM)
LINK Software, tactical data link capability in line with STANAG 5511, STANAG 5522 (fixed
frequency), LINK-Y
HF Modem, single tone modems in line with STANAG 4285, STANAG 4539,
MIL-STD-188-110B section 5.3 + App. C, STANAG 4529, STANAG 4481, STANAG 5065,
MIL-STD-188-110B App. F
Secure Digital Voice (supported in STANAG 4538 and FF), Secure Digital Data (supported in
STANAG 4538), Last Ditch Voice (supported in STANAG 4538)
Split Site
Mating connector set

Mating Connector Set for R&S MR4100E

14

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Type

Order No.

6118.9609.22

6119.7800.xx
6119.7900.xx

6105.6006.35
6119.5007.02
6119.6003.02
6119.3504.02

6120.6003.02
6142.7560.02
6142.7619.02

6142.7519.02

6142.7719.02

6142.7760.02

6120.5007.05

R&S MR4100E
R&S DS4100A

R&S DS4100D
R&S GB4000C

R&S FK4120

R&S FK4140

R&S GS4102
R&S GS4101S

R&S GS4155S

R&S GS4114S
R&S GM4120S

R&S GM4121S
R&S GS4156S
R&S ZF4101

Version 04.00, July 2011

R&SXK4115A/D transceiver
Designation
Base units
HF Transceiver, 150 W, DC, without local control panel and radio software, ruggedized model
Radio software
Software CD without export restriction
Software CD with export restriction
Hardware options
Local Control Panel (without audio, incl. software and LAN), ruggedized model
Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section
Digitally Tuned RF Selection, 40 dB, functional for transmitting and receiving section
NMEA (DSC) Interface, for connecting an external DSC controller (GMDSS)
Software options (option keys)

EPM (ECCM) Software: R&S SECOM-H


ALE-2G (FED-STD-1045/1046/1049)
ALE-2G (FED-STD-1045/1046/1049), STANAG 4538/ALE-3G (FLSU, LP, xDL, ALM)
LINK Software, tactical data link capability in line with STANAG 5511, STANAG 5522 (fixed
frequency), LINK-Y
CE Conformity Mark
HF Modem, single tone modems in line with STANAG 4285, STANAG 4539,
MIL-STD-188-110B section 5.3 + App. C, STANAG 4529, STANAG 4481, STANAG 5065,
MIL-STD-188-110B App. F
Secure Digital Voice (supported in STANAG 4538 and FF), Secure Digital Data (supported in
STANAG 4538), Last Ditch Voice (supported in STANAG 4538)
Split Site
Power supply units
External Power Supply, AC/DC, ruggedized model
Mating connector sets

Mating Connector Set for R&S IN4000A

Mating Connector Set for R&S MR4100X


Power supply cables

Power Supply Cable, R&S XK4115 R&S IN4000A, 0.5 m length

Power Supply Cable, R&S XK4115 R&S IN4000A, 1 m length

Power Supply Cable, R&S XK4115 R&S IN4000A, 2.5 m length

Type

Order No.

6119.7251.22

6119.7800.xx
6119.7900.xx

6105.6006.35
6119.5007.02
6119.6003.02
6119.3504.02

6095.4859.02
6120.6003.02
6142.7560.02
6142.7619.02

6120.3140.02
6142.7519.02

6142.7719.02

6142.7760.02

6105.5800.02

6105.7002.02
6120.5007.02

6120.5807.05
6120.5807.10
6120.5807.25

R&S MR4100X
R&S DS4100A

R&S DS4100D
R&S GB4000C

R&S FK4120

R&S FK4140

R&S GS4102
R&S GS3001S

R&S GS4101S

R&S GS4155S

R&S GS4114S
R&S GS4117S

R&S GM4120S

R&S GM4121S
R&S GS4156S
R&S IN4000A
R&S ZF4001

R&S ZF4101
R&S GK4103

R&S GK4103

R&S GK4103

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

15

Version 04.00, July 2011

500 W and 1000 W transceiver systems


Designation
Base units
HF Receiver/Exciter, DC, without local control panel and radio software, ruggedized model
Radio software
Software CD without export restriction
Software CD with export restriction
Hardware options
Local Control Panel (without audio, incl. software and LAN), ruggedized model
Digitally Tuned RF Selection, 20 dB, functional for transmitting and receiving section
Digitally Tuned RF Selection, 40 dB, functional for transmitting and receiving section
NMEA (DSC) Interface, for connecting an external DSC controller (GMDSS)
Software options (option keys)

EPM (ECCM) Software: R&S SECOM-H


ALE-2G (FED-STD-1045/1046/1049)
ALE-2G (FED-STD-1045/1046/1049), STANAG 4538/ALE-3G (FLSU, LP, xDL, ALM)
LINK Software, tactical data link capability in line with STANAG 5511, STANAG 5522 (fixed
frequency), LINK-Y
Selective Level Control (PA)
CE Conformity Mark
HF Modem, single tone modems in line with STANAG 4285, STANAG 4539,
MIL-STD-188-110B section 5.3 + App. C, STANAG 4529, STANAG 4481, STANAG 5065,
MIL-STD-188-110B App. F
Secure Digital Voice (supported in STANAG 4538 and FF), Secure Digital Data (supported in
STANAG 4538), Last Ditch Voice (supported in STANAG 4538)
Split Site
Power amplifiers
500 W HF Power Amplifier
500 W HF Power Amplifier, with receiver input protection
1000 W HF Power Amplifier
1000 W HF Power Amplifier, with receiver input protection
Power supply units for 500 W transceiver system
Power Supply 230 V AC, 1 or 3 phases + N/208 V AC, 3-phase

Power Supply 440 V AC, 3 phases (used together with an R&S BV4190 transformer)
Power Supply 220 V DC
Transformer 440 V AC, 3-phase
Power Supply 115 V AC, 1 phase + N
Power supply units for 1000 W transceiver system
Power Supply 230 V AC, 1 or 3 phases + N/208 V AC, 3-phase

Power Supply 440 V AC, 3 phases (used together with an R&S BV4190 transformer)
Transformer 440 V AC, 3-phase
Mating connector sets

Mating Connector Set for R&S MR4100G

Mating Connector Set for R&S VK4150/VK4190

Mating Connector Set for R&S IN4150/IN4190

Mating Connector Set for R&S BV4190


Connecting cables

Fiber-Optic Connecting Cable, R&S VKx R&S GXx, 1 m length

Fiber-Optic Connecting Cable, R&S VKx R&S GXx, 3.5 m length

Fiber-Optic Connecting Cable, R&S VKx R&S GXx, 50 m length

DC Cable, R&S GXx R&S VKx, 2.5 m length

RF Cable, R&S GXx R&S VKx, 3 m length

Control Cable, R&S VKx R&S INx, 3 m length

DC Cable, R&S VKx R&S INx, 3 m length

Power Cable, R&S BVx R&S INx, 3 m length

16

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Type

Order No.

6118.9750.22

6119.7800.xx
6119.7900.xx

6105.6006.35
6119.5007.02
6119.6003.02
6119.3504.02

6095.4859.02
6120.6003.02
6142.7560.02
6142.7619.02

6120.6703.02
6120.3140.02
6142.7519.02

6142.7719.02

6142.7760.02

6119.9002.03
6119.9002.13
6120.1501.03
6120.1501.13

6120.0705.02
6120.0705.03
6120.0705.12
6120.2908.02
6120.2708.02

6120.2708.02
6120.2708.03
6120.2908.02

6120.5007.04
6120.5207.02
6120.2808.02
6120.7700.02

6120.5620.10
6120.5620.35
6120.5620.50
6120.5907.25
6120.3604.03
6120.3656.03
6120.3704.03
6120.3756.03

R&S MR4100G
R&S DS4100A

R&S DS4100D
R&S GB4000C

R&S FK4120

R&S FK4140

R&S GS4102
R&S GS3001S

R&S GS4101S

R&S GS4155S

R&S GS4114S
R&S GS4115S

R&S GS4117S

R&S GM4120S

R&S GM4121S
R&S GS4156S
R&S VK4150

R&S VK4150

R&S VK4190

R&S VK4190
R&S IN4150

R&S IN4150

R&S IN4150

R&S BV4190

R&S IN4190
R&S IN4190

R&S IN4190

R&S BV4190
R&S ZF4101

R&S ZF4103

R&S ZF4107

R&S ZF4108
R&S GK4101

R&S GK4101

R&S GK4101

R&S GK4104

R&S GK4105

R&S GK4106

R&S GK4107

R&S GK4108

Version 04.00, July 2011

Auxiliary equipment
Designation
Remote control units
Remote Control Unit, ruggedized model

Mating Connector Set for R&S GB4000C


Audio units
Headset incl. microphone (ruggedized version) with cable and NF-7 connector
Handset incl. microphone (ruggedized version) with cable and NF-7 connector
Headset, dynamic with cable and NF-7 connector
Microphone with PTT, handheld
Handset with PTT, standard
Other equipment
Morse Key with cable and connector
Fillgun
USB Cable, fillgun PC

Type

Order No.

R&S GB4000C 6105.6006.36

R&S ZF4410
6105.9011.04

0693.7664.02
0693.7712.02
0583.6012.02
6064.5001.02
6064.6008.03

6075.3763.02
6099.3805.02
6118.1750.02

R&S GA012

R&S GA013

R&S GA015

R&S GA2100

R&S GA2120
R&S GA2180

R&S GP3000

R&S GK3021

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

17

Version 04.00, July 2011

18

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

Version 04.00, July 2011

Rohde & Schwarz R&S M3SR Series4100 Software Defined Radios

19

Service you can rely on


J Worldwide
J Local

and personalized
and flexible
J Uncompromising quality
J Long-term dependability
J Customized

About Rohde&Schwarz
Rohde&Schwarz is an independent group of companies
specializing in electronics. It is a leading supplier of solutions in the fields of test and measurement, broadcasting,
radiomonitoring and radiolocation, as well as secure
communications. Established more than 75 years ago,
Rohde&Schwarz has a global presence and a dedicated
service network in over 70 countries. Company headquarters are in Munich, Germany.
Environmental commitment
Energy-efficient products
Continuous improvement in environmental sustainability
ISO14001-certified environmental management system

Certified Quality System

Certified Quality System

Certified Quality System

Certified Quality System

ISO 9001

AQAP-2110

EN 9100
EN 9110

Rohde&Schwarz GmbH&Co. KG
www.rohde-schwarz.com
Regional contact
Europe, Africa, Middle East
+4989412912345
customersupport@rohde-schwarz.com
North America
1888TESTRSA (18888378772)
customer.support@rsa.rohde-schwarz.com
Latin America
+14109107988
customersupport.la@rohde-schwarz.com
Asia/Pacific
+6565130488
customersupport.asia@rohde-schwarz.com
R&S is a registered trademark of Rohde&Schwarz GmbH&Co. KG
Trade names are trademarks of the owners | Printed in Germany (ch)
PD 5213.9557.22 | Version 04.00 | July 2011 | R&SM3SRSeries4100
Subject to change
2008 - 2011 Rohde&Schwarz GmbH&Co. KG | 81671 Mnchen, Germany

5213955722

Umschlag_Series4100_dat-sw_en_5213-9557-22_v0400.indd 2

13.07.2011 11:00:51

You might also like