Professional Documents
Culture Documents
Entry-level solution
The 2D Basic system is a low priced entry-level solution to face profiling. High measurement accuracy and
ease of use make it an ideal tool for every blaster!
Upgradable
2D Basic system can be upgraded to a full manual 3D
system. All components like software, handheld laser
and ultra-rugged handheld device can further be
used - save your investments!
3d fastscan profiler
automatic 3D system
The 3D FastScan Profiler is a fully automated laser
scanner. The laser-class 1M eyesafe laser creates a
very accurate and dense 3D model of the rock face.
Fast and accurate
Up to 200 points per second - with an accuracy of
better than 2,5cm! This system gives you the accuracy you need and even more!
Easy to use
The modular design allows for various upgrade
possibilities. The data logger can also be used with
the hole deviation measurement probe or a GPS/
GNSS system.
GNSS Survey
Fast and accurate
Performing a stake-out of the hole positions with a
GNSS system gives you maximum accuracy: every
hole is placed at the correct location and the collected information can be used to update the design
model.
Additional possibilities
By using GNSS sytems you can collect more information which may be useful for quarry/mine
management, e.g. update your mine maps, setup
permanent reference stations, survey vibration measurement systems,...
Hole Probes
easy to use
high accuracy
cheap
modular design
easy to use
GNSS Survey
3D Fastscan Profiler
very accurate
robust
integrated workflow
fast
modular design
easy to use
3D Fastscan Profiler
Dieter Duda,
Wager-Fischer Schotterwerke in Bhmenkirch is
successfully using the 2D system.
Dipl.-Ing. Ulrich Mann, SSE Deutschland GmbH in Ehrenfriedersdorf, is using the 3D Fastscan Profiler since
2007. His decision: Functions and benefits are right
and the blasting result speaks for itself.