Professional Documents
Culture Documents
Copyright
Copyright 2006-2013 Intergraph Corporation. All Rights Reserved. Intergraph is part of Hexagon.
Including software, file formats, and audiovisual displays; may be used pursuant to applicable software license agreement; contains
confidential and proprietary information of Intergraph and/or third parties which is protected by copyright law, trade secret law, and
international treaty, and may not be provided or otherwise made available without proper authorization from Intergraph Corporation.
Portions of this software are owned by Spatial Corp. 1986-2013. All Rights Reserved.
Portions of the user interface copyright 2012-2013 Telerik AD.
Documentation
Documentation shall mean, whether in electronic or printed form, User's Guides, Installation Guides, Reference Guides,
Administrator's Guides, Customization Guides, Programmer's Guides, Configuration Guides and Help Guides delivered with a
particular software product.
Other Documentation
Other Documentation shall mean, whether in electronic or printed form and delivered with software or on eCustomer, SharePoint, or
box.net, any documentation related to work processes, workflows, and best practices that is provided by Intergraph as guidance for
using a software product.
Terms of Use
a.
Use of a software product and Documentation is subject to the End User License Agreement ("EULA") delivered with the
software product unless the Licensee has a valid signed license for this software product with Intergraph Corporation. If the
Licensee has a valid signed license for this software product with Intergraph Corporation, the valid signed license shall take
precedence and govern the use of this software product and Documentation. Subject to the terms contained within the
applicable license agreement, Intergraph Corporation gives Licensee permission to print a reasonable number of copies of the
Documentation as defined in the applicable license agreement and delivered with the software product for Licensee's internal,
non-commercial use. The Documentation may not be printed for resale or redistribution.
b.
For use of Documentation or Other Documentation where end user does not receive a EULA or does not have a valid license
agreement with Intergraph, Intergraph grants the Licensee a non-exclusive license to use the Documentation or Other
Documentation for Licensees internal non-commercial use. Intergraph Corporation gives Licensee permission to print a
reasonable number of copies of Other Documentation for Licensees internal, non-commercial. The Other Documentation may
not be printed for resale or redistribution. This license contained in this subsection b) may be terminated at any time and for any
reason by Intergraph Corporation by giving written notice to Licensee.
Disclaimer of Warranties
Except for any express warranties as may be stated in the EULA or separate license or separate terms and conditions, Intergraph
Corporation disclaims any and all express or implied warranties including, but not limited to the implied warranties of merchantability
and fitness for a particular purpose and nothing stated in, or implied by, this document or its contents shall be considered or deemed
a modification or amendment of such disclaimer. Intergraph believes the information in this publication is accurate as of its
publication date.
The information and the software discussed in this document are subject to change without notice and are subject to applicable
technical product descriptions. Intergraph Corporation is not responsible for any error that may appear in this document.
The software, Documentation and Other Documentation discussed in this document are furnished under a license and may be used
or copied only in accordance with the terms of this license. THE USER OF THE SOFTWARE IS EXPECTED TO MAKE THE FINAL
EVALUATION AS TO THE USEFULNESS OF THE SOFTWARE IN HIS OWN ENVIRONMENT.
Intergraph is not responsible for the accuracy of delivered data including, but not limited to, catalog, reference and symbol data.
Users should verify for themselves that the data is accurate and suitable for their project work.
Limitation of Damages
IN NO EVENT WILL INTERGRAPH CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL INCIDENTAL,
SPECIAL, OR PUNITIVE DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF USE OR PRODUCTION, LOSS OF
REVENUE OR PROFIT, LOSS OF DATA, OR CLAIMS OF THIRD PARTIES, EVEN IF INTERGRAPH CORPORATION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
UNDER NO CIRCUMSTANCES SHALL INTERGRAPH CORPORATIONS LIABILITY EXCEED THE AMOUNT THAT
INTERGRAPH CORPORATION HAS BEEN PAID BY LICENSEE UNDER THIS AGREEMENT AT THE TIME THE CLAIM IS
MADE. EXCEPT WHERE PROHIBITED BY APPLICABLE LAW, NO CLAIM, REGARDLESS OF FORM, ARISING OUT OF OR IN
CONNECTION WITH THE SUBJECT MATTER OF THIS DOCUMENT MAY BE BROUGHT BY LICENSEE MORE THAN TWO (2)
YEARS AFTER THE EVENT GIVING RISE TO THE CAUSE OF ACTION HAS OCCURRED.
IF UNDER THE LAW RULED APPLICABLE ANY PART OF THIS SECTION IS INVALID, THEN INTERGRAPH LIMITS ITS
LIABILITY TO THE MAXIMUM EXTENT ALLOWED BY SAID LAW.
Export Controls
Intergraph Corporations software products and any third-party Software Products obtained from Intergraph Corporation, its
subsidiaries, or distributors (including any Documentation, Other Documentation or technical data related to these products) are
subject to the export control laws and regulations of the United States. Diversion contrary to U.S. law is prohibited. These Software
Products, and the direct product thereof, must not be exported or re-exported, directly or indirectly (including via remote access)
under the following circumstances:
a.
To Cuba, Iran, North Korea, Sudan, or Syria, or any national of these countries.
b.
To any person or entity listed on any U.S. government denial list, including but not limited to, the U.S. Department of Commerce
Denied Persons, Entities, and Unverified Lists, http://www,bis.doc.gov/complianceandenforcement/liststocheck.htm, the U.S.
Department of Treasury Specially Designated Nationals List,
www.treas.gov/offices/enforcement/ofac/http://www.pmddtc.state.gov/compliance/debar.html, and the U.S. Department of State
Debarred List.
c.
To any entity when Licensee knows, or has reason to know, the end use of the Software Product is related to the design,
development, production, or use of missiles, chemical, biological, or nuclear weapons, or other un-safeguarded or sensitive
nuclear uses.
d.
To any entity when Licensee knows, or has reason to know, that an illegal reshipment will take place.
Any questions regarding export or re-export of these Software Products should be addressed to Intergraph Corporations Export
Compliance Department, Huntsville, Alabama 35894, USA.
Trademarks
Intergraph, the Intergraph logo, PDS, SmartPlant, FrameWorks, I-Convert, I-Export, I-Sketch, SmartMarine, IntelliShip, INtools,
ISOGEN, MARIAN, SmartSketch, SPOOLGEN, SupportManager, SupportModeler, and Intergraph Smart are trademarks or
registered trademarks of Intergraph Corporation or its subsidiaries in the United States and other countries. Microsoft and Windows
are registered trademarks of Microsoft Corporation. ACIS is a registered trademark of SPATIAL TECHNOLOGY, INC. Infragistics,
Presentation Layer Framework, ActiveTreeView Ctrl, ProtoViewCtl, ActiveThreed Ctrl, ActiveListBar Ctrl, ActiveSplitter,
ActiveToolbars Ctrl, ActiveToolbars Plus Ctrl, and ProtoView are trademarks of Infragistics, Inc. Incorporates portions of 2D DCM,
3D DCM, and HLM by Siemens Product Lifecycle Management Software III (GB) Ltd. All rights reserved. Gigasoft is a registered
trademark, and ProEssentials a trademark of Gigasoft, Inc. VideoSoft and VXFlexGrid are either registered trademarks or
trademarks of ComponentOne LLC 1991-2013, All rights reserved. Oracle, JD Edwards, PeopleSoft, and Retek are registered
trademarks of Oracle Corporation and/or its affiliates. Tribon is a trademark of AVEVA Group plc. Alma and act/cut are trademarks of
the Alma company. Other brands and product names are trademarks of their respective owners.
Contents
Preface .......................................................................................................................................................... 7
Documentation Set ................................................................................................................................. 7
Documentation Comments ................................................................................................................... 10
What's New in 2D Symbols Reference Data ........................................................................................... 10
2D Symbols Reference Data ..................................................................................................................... 11
Member Cross Sections............................................................................................................................ 13
Cross Section Symbol 2L ...................................................................................................................... 14
Cross Section Symbol C (MC) .............................................................................................................. 15
Cross Section Symbol CS ..................................................................................................................... 17
Cross Section Symbol HP ..................................................................................................................... 18
Cross Section Symbol HSSC (Pipe) ..................................................................................................... 19
Cross Section Symbol HSSR................................................................................................................ 20
Cross Section Symbol HW .................................................................................................................... 21
Cross Section Symbol HWWF .............................................................................................................. 22
Cross Section Symbol L ........................................................................................................................ 23
Cross Section Symbol M ....................................................................................................................... 25
Cross Section Symbol MC .................................................................................................................... 26
Cross Section Symbol MT .................................................................................................................... 27
Cross Section Symbol Pipe .................................................................................................................. 28
Cross Section Symbol Rect .................................................................................................................. 29
Cross Section Symbol RectC................................................................................................................ 30
Cross Section Symbol RectCWF .......................................................................................................... 32
Cross Section Symbol RectWF............................................................................................................. 33
Cross Section Symbol RS ..................................................................................................................... 34
Cross Section Symbol S ....................................................................................................................... 35
Cross Section Symbol ST ..................................................................................................................... 36
Cross Section Symbol T (MT) ............................................................................................................... 37
Cross Section Symbol W (M) ................................................................................................................ 38
Cross Section Symbol Wedge .............................................................................................................. 40
Cross Section Symbol WedgeWF......................................................................................................... 41
Cross Section Symbol WT .................................................................................................................... 42
Wall Cross Sections .................................................................................................................................. 45
Cross Section Symbol HW .................................................................................................................... 46
Cross Section Symbol HWWF .............................................................................................................. 47
Cross Section Symbol Rect .................................................................................................................. 48
Cross Section Symbol RectC................................................................................................................ 50
Cross Section Symbol RectCWF .......................................................................................................... 51
Cross Section Symbol RectWF............................................................................................................. 53
Cross Section Symbol Wedge .............................................................................................................. 54
Cross Section Symbol WedgeWF......................................................................................................... 55
Contents
Index ........................................................................................................................................................... 57
Preface
TM
This document is a reference data guide for the Intergraph Smart 3D 2D Symbols task. The
purpose of this document is to describe the reference data delivered with the software for this
task.
Reference data includes both catalog data and specification data. Catalog data includes the
parts that you place in the model, such as piping components and equipment. Specification data
includes the rules that govern how those parts are placed and connected.
Documentation Set
TM
Intergraph Smart 3D documentation is available as Adobe PDF files. The content is the same
as the online Help. To access these PDF documents, click Help > Printable Guides in the
software.
The documentation set is divided into four categories:
Administrative guides contain information about installing, configuring, customizing, and
troubleshooting.
User's guides provide command reference and how-to information for working in each task.
Reference data guides define the reference data workbooks. Not all tasks have reference
data.
ISOGEN guides.
Administrative Guides
TM
Intergraph Smart 3D Installation Guide - Provides instructions on installing and configuring the
software.
Project Management User's Guide - Provides instructions for setting up the databases, creating
permission groups, backing up and restoring project data, assigning access permissions to the
model, defining and managing locations for Global Workshare, and version upgrade.
Global Workshare Guide - Provides instructions for setting up the software and the databases to
work in a workshare environment.
Interference Checking Guide - Provides information on installing, configuring, and using the
interference detection service.
Integration Reference Guide - Provides information about installing, configuring, and using
Smart 3D in an integrated environment.
Interpreting Human Piping Specifications - Provides information about how to interpret human
piping specifications so that you can create the corresponding piping specification in the
software.
Export to PDMS - Provides information about how to export model data from Smart 3D to
PDMS. Specific guidelines relating to best practices and known limitations of the export
functionality are also included.
Point Cloud Reference - Provides information for referencing point cloud files provided by point
cloud vendors in Smart 3D.
Troubleshooting Reference Guide - Provides information on how to resolve errors that you might
encounter in the software by documenting troubleshooting tips, error messages, and To Do List
messages.
Preface
Plant Design System (PDS) Guide - Provides all information needed to use PDS with Smart 3D.
Topics include referencing active PDS projects in Smart 3D, exporting PDS data and importing
that data into Smart 3D, and converting PDS reference data to Smart 3D reference data.
TM
Intergraph Smart 3D Programmer's Guide - Provides information about custom commands,
naming rules, and symbol programming. If you install the Programming Resources, this
document is delivered to the [Product Folder]\Programming\Help folder.
User's Guides
Catalog User's Guide - Provides information about viewing, editing, and creating reference data
and select lists (codelists).
Common User's Guide - Provides information about defining workspaces, manipulating views,
and running reports.
Compartmentation User's Guide - Provides instruction for placing volume objects such as
compartments and zones in the model.
Electrical User's Guide - Provides information about routing electrical cable, cableway, cable
tray, and conduit.
Equipment and Furnishings User's Guide - Provides information about placing equipment.
Geometry Analysis and Repair User's Guide - Provides instructions for importing and exporting
model data, checking the data against a defined set of requirements, and repairing the data.
Grids User's Guide - Provides instructions for creating coordinate systems, elevation grid
planes, vertical grid planes, radial cylinders, radial planes, grid arcs, and grid lines.
Hangers and Supports User's Guide - Provides instructions on placing piping, duct, and
cableway supports in the model.
Hole Management User's Guide - Provides instructions for placing, reviewing, and approving
holes in a structure.
HVAC User's Guide - Provides instructions for routing HVAC duct.
Molded Forms User's Guide - Provides instructions for placing hull, bulkheads, major openings,
stiffeners, and other major structural components in the model.
Orthographic Drawings User's Guide - Provides information about creating and managing
orthographic drawings.
Piping Isometric Drawings User's Guide - Provides information about creating and managing
piping isometric drawings.
Piping User's Guide - Provides instructions for routing pipe and placing valves, taps, and pipe
joints.
Planning User's Guide - Provides instructions about defining the assembly hierarchy (production
bill of material) by creating blocks and assemblies and by specifying the assembly sequence.
Reports User's Guide - Provides information about creating and managing spreadsheet reports.
Space Management User's Guide - Provides instructions for placing space objects such as
areas, zones, interference volumes, and drawing volumes in the model.
Structural Analysis User's Guide - Provides instructions for defining loads, load cases, load
combinations, and the importing and exporting of analytical data.
Structural Detailing User's Guide - Provides instructions for creating, detailing, and maintaining
the structural members of a model.
Structural Manufacturing User's Guide - Provides instructions for creating and maintaining
manufacturing objects such as templates, jigs, and margins.
Structure User's Guide - Provides instructions for placing structural members, such as beams,
columns, slabs, openings, stairs, ladders, equipment foundations, and handrails.
Preface
Systems and Specifications User's Guide - Provides instructions for creating systems and
selecting the available specifications for each system type.
Preface
ISOGEN Guides
Symbol Keys Reference Guide - Provides information about the symbol keys for isometric
drawings. This guide is from Alias, the makers of ISOGEN.
Documentation Comments
We welcome comments or suggestions about this documentation. You can send us an email at:
PPMdoc@intergraph.com.
Documentation updates for supported software versions are available from eCustomer
https://crmweb.intergraph.com.
10
SECTION 1
11
12
SECTION 2
In This Section
13
14
15
16
17
18
19
20
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
kdesign - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on the welded section.
kdetail - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on welded section.
CentroidY - Type the vertical distance from designated member edge to the centroidal axis.
Ixx - Type the moment of inertia for the section's local x-axis.
Zxx - Type the plastic section modulus for the section's local x-axis.
Sxx - Type the section modulus for the section's local x-axis.
Rxx - Type the radius of gyration for the section's local x-axis.
21
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Flange Right Width - Define the flange width on the right side.
Flange Left Width - Define the flange width on the left side.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
22
23
24
25
26
27
28
29
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Setback - Define the setback. This value is defined in meters.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
30
31
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Setback - Define the setback. This value is defined in meters.
Flange Right Width - Define the flange width on the right side. This valve is defined in meters.
Flange Left Width - Define the flange width on the left side. This valve is defined in meters.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
kdesign - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on the welded section.
kdetail - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on welded section.
CentroidX - Type the horizontal distance from the designated member edge to the centroidal
axis.
CentroidY - Type the vertical distance from the designated member edge to the centroidal axis.
32
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Flange Right Width - Define the flange width on the right side. This valve is defined in meters.
Flange Left Width - Define the flange width on the left side. This valve is defined in meters.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
33
34
35
36
37
38
39
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle Right - Define the angle on the right side of the web.
Angle Left - Define the angle on the left side of the web.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
kdesign - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on the welded section.
kdetail - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on welded section.
CentroidX - Type the horizontal distance from the designated member edge to the centroidal
axis.
CentroidY - Type the vertical distance from the designated member edge to the centroidal axis.
Ixx - Type the moment of inertia for the section's local x-axis.
Zxx - Type the plastic section modulus for the section's local x-axis.
40
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle Right - Define the angle on the right side of the web.
Angle Left - Define the angle on the left side of the web.
Flange Right Width - Define the flange width on the right side.
Flange Left Width - Define the flange width on the left side.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
41
42
43
44
SECTION 3
In This Section
45
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
kdesign - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on the welded section.
kdetail - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on welded section.
CentroidY - Type the vertical distance from designated member edge to the centroidal axis.
Ixx - Type the moment of inertia for the section's local x-axis.
Zxx - Type the plastic section modulus for the section's local x-axis.
Sxx - Type the section modulus for the section's local x-axis.
Rxx - Type the radius of gyration for the section's local x-axis.
46
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Flange Right Width - Define the flange width on the right side.
Flange Left Width - Define the flange width on the left side.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
47
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
48
49
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Setback - Define the setback. This value is defined in meters.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
kdesign - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on the welded section.
kdetail - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on welded section.
CentroidX - Type the horizontal distance from the designated member edge to the centroidal
axis.
CentroidY - Type the vertical distance from the designated member edge to the centroidal axis.
Ixx - Type the moment of inertia for the section's local x-axis.
50
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle - Define the angle.
Setback - Define the setback. This value is defined in meters.
Flange Right Width - Define the flange width on the right side. This valve is defined in meters.
Flange Left Width - Define the flange width on the left side. This valve is defined in meters.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
51
52
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Flange Right Width - Define the flange width on the right side. This valve is defined in meters.
Flange Left Width - Define the flange width on the left side. This valve is defined in meters.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
kdesign - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on the welded section.
kdetail - Type the distance from the outer face of the flange to the web toe of the fillet of the
rolled shape or the equivalent distance on welded section.
CentroidY - Type the vertical distance from designated member edge to the centroidal axis.
Ixx - Type the moment of inertia for the section's local x-axis.
Zxx - Type the plastic section modulus for the section's local x-axis.
Sxx - Type the section modulus for the section's local x-axis.
Rxx - Type the radius of gyration for the section's local x-axis.
53
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
Angle Right - Define the angle on the right side of the web.
Angle Left - Define the angle on the left side of the web.
Unit Weight - Type the weight of the section. The unit weight is defined in mass per length
pound per foot (lbm/ft).
Area - Type the cross-section area for the section.
Depth - Type the depth for the section. The depth is defined in meters
Width - Type the width for the section. The width is defined in meters.
Perimeter - The outside perimeter distance for the section.
d - Type the depth for the section.
bf - Type the width for the section.
tw - Type the web thickness for the section. The thickness is defined in meters.
tf - Type the flange thickness for the section. The thickness is defined in meters.
54
Section Name - Type the section name. The section name must be unique within the section
standard.
Short Name - Type the short name for the section.
EDI Name - Type the Electronic Data Interchange name for the section. This name is used
when translating sections through CIMsteel. This property is currently not used.
Group Id - Type the material group identification for the section.
55
56
Index
2
2D Symbols Reference Data 11
C
Cross Section Symbol 2L 14
Cross Section Symbol C (MC) 15
Cross Section Symbol CS 17
Cross Section Symbol HP 18
Cross Section Symbol HSSC (Pipe) 19
Cross Section Symbol HSSR 20
Cross Section Symbol HW 21, 46
Cross Section Symbol HWWF 22, 47
Cross Section Symbol L 23
Cross Section Symbol M 25
Cross Section Symbol MC 26
Cross Section Symbol MT 27
Cross Section Symbol Pipe 28
Cross Section Symbol Rect 29, 48
Cross Section Symbol RectC 30, 50
Cross Section Symbol RectCWF 32, 51
Cross Section Symbol RectWF 33, 53
Cross Section Symbol RS 34
Cross Section Symbol S 35
Cross Section Symbol ST 36
Cross Section Symbol T (MT) 37
Cross Section Symbol W (M) 38
Cross Section Symbol Wedge 40, 54
Cross Section Symbol WedgeWF 41, 55
Cross Section Symbol WT 42
D
Documentation Comments 10
Documentation Set 7
M
Member Cross Sections 13
P
Preface 7
W
Wall Cross Sections 45
What's New in 2D Symbols Reference Data
10
57