You are on page 1of 136

24BL-5L,451-4,Nonhyeon-dong,

Namdong-gu,Incheon,405-849 Korea

BASE STATION ANTENNA AND TMA PRODUCTS

Ace Technologies Corp.

ACEs Products Catalogue

BASE STATION ANTENNA


AND TMA PRODUCTS

www.aceteq.co.kr

Base Station Antennas


Repeater Antenna
TMAs
RETu
Bias-T & Smart Bias-T

Ace Technologies Corp. is an ISO 9001 and ISO 14001 certied company
and fully compliant with EU directive 2002-95-EC for Reduction of Hazardous Substances (RoHS)

Contact information
Address 451-3, Nonhyun-Dong, Namdong-Gu, Incheon, Korea
Phone +82 32 458 1514
Fax +82 32 458 1522
E-mail : acetechnology@aceteq.co.kr
Web Site : http://www.aceteq.co.kr

Copyright 2011 Ace Technologies Corp.


All Rights Reserved.
The information contained in this document is for reference purpose only, and is subject to change or withdrawal without notice.
The contents of this document may not be reproduced in whole or in part in any manner without agreement of Ace Technologies Corp.

Antenna Product Features


Antenna Products
Aces product portfolio is fully in line with all major frequency bands and air interfaces in world wide.
Every product is designed for the most challenging environments, but keep the most competitive price to
reduce the expenses of customers.

Material
Reector
Weather-proof aluminum for high physical strength and resistance to corrosion.
Radome
Excellent durability in tough environment condition using polymeric material having high physical strength.
During operational lifetime, the polymeric material guarantees optimum performance for tensile strength,
stability and UV resistance when it is exposed in UV and outdoor environmental conditions.
Radiators
Most of materials of radiating elements are not special but common in antenna industries.
However, Ace achieved low loss & intermodulation design by creative design.
All screws and nuts
Stainless steel having high corrosion resistance.

Environmental Condition
Designed to operate under environmental conditions as described in ETSI EN 300 019-1-4 class 4.1 and IEC
60721-3-4 class.
Normal Operating Temperature : -40C ~ +55C
Non Destructive Temperature : -55C ~ +70C
It is satised with environmental test of ISO 21207 method B for corrosion

Environmental Test
Environmental test conditions : ETSI EN 300 019-1-4 class 4.1 and IEC 60721-3-4 class

Grounding
The metal parts of the antenna including mounting kit and inner conductors are DC grounded.

Testing Methods
Ace manufactures and tests products by using most advanced techniques and distinctive measurement
equipment to assure the performance and reliability that customers always wish.

General Information
The Catalogue is splitted into 2 parts.
Part 1. BASE STATION ANTENNAS
& ACCESSARIES
Part 2. TMAs

BASE STATION ANTENNAS

Directional Antennas (700 ~ 1000 MHz)

Type

Frequency bands

Beam() Gain(dBi) Electrical Tilt

Model name

Page

X-pol.

790 ~ 960 MHz

33

17

0 ~ 8

XDGL-17-33S-VT

65

15

0 ~ 14

XDGL-15-65-VT

10

65

16

XDGL-16-65-0T

11

65

15

XDGL-15-65-4T

12

65

15

XDGL-15-65-8T

13

65

16

0 ~ 12

XDGL-16-65-VT

14

65

18

XDGL-18-65-0T

15

65

18

XDGL-18-65-4T

16

65

18

XDGL-18-65-9T

17

65

17

0 ~ 10

XDGL-17-65-VT

18

90

16

XDGL-16-90-0T

19

90

16

XDGL-16-90-4T

20

90

16

XDGL-16-90-8T

21

90

16

0 ~ 8

XDGL-16-90-VT

22

Directional Antennas (1700 ~ 2200 MHz)

Type

Frequency bands

Beam() Gain(dBi) Electrical Tilt

Model name

X-pol.

1710 ~ 2170 MHz

33

19

XDH-19-33B-6T

24

33

19

0 ~ 8

XDH-19-33S-VT

25

65

17

XDPH-17-65S-0T

26

65

18

XDH-18-65-0T

27

65

18

XDH-18-65-2T

28

65

18

XDH-18-65-6T

29

65

17

0 ~ 10

XDH-17-65-VT-USS

30

65

19

XDH-19-65-0T

31

65

19

XDH-19-65-4T

32

65

19

XDH-19-65-8T

33

65

19

0 ~ 6

XDH-19-65-VT

34

90

15

XDH-15-90B-0T

35

90

16

0 ~ 8

XDH-16-90-VT

36

65

18

XDHH-18-65-0T

37

65

18

XDHH-18-65-2T

38

65

18

XDHH-18-65-6T

39

65

17

0 ~ 10

XDHH-18-65-VT

40

65

18

0 ~ 15

XDH-18-65-iVT

41

XX-pol.

iRET

1710 ~ 2170 MHz

1710 ~ 2170 MHz

Page

Directional Antennas (Multi band)

Type

Frequency bands

Dual band 790 ~ 960 / 1710 ~ 2170 MHz

Triple band 790 ~ 960 / 1710 ~ 2170 / 1710 ~ 2170 MHz

Beam() Gain(dBi) Electrical Tilt

Model name

Page

65

15

0 ~ 8 / 0 ~ 10

XDLH-15-65-VT

43

65

17

0 / 0

XDLH-17-65-0T

44

65

17

4 / 4

XDLH-17-65-4T

45

65

17

0 ~ 8 / 0 ~ 10

XDLH-17-65-VT

46

65

17

0 ~ 8 / 0 ~ 6

XDLH-17-19-65-VT

48

90

15

0 ~ 8 / 0-6

XDLH-15-90S-VT

50

65

16

0 ~ 10 / 0 ~ 10 / 0 ~ 10 XDLHH-16-65-VT

51

Directional Antennas (2300 ~ 2700 MHz)

Type

Frequency bands

Beam() Gain(dBi) Electrical Tilt

Model name

X-pol.

2300 ~ 2400 MHz

33

19

XDW-19-33-0T

54

33

19

XDW-19-33-2T

55

33

19

XDW-19-33-6T

56

33

19

0 ~ 8

XDW-19-33-VT

57

2500 ~ 2700 MHz

33

19

XDWM-19-33-0T

58

2300 ~ 2400 MHz

45

19

XDW-19-45S-0T

59

2500 ~ 2700 MHz

45

19

XDWM-19-45S-0T

60

2300 ~ 2400 MHz

65

14

XDWS-14-65NF-0T

61

65

15

XDW-15-65-2T

62

65

15

XDW-15-65-6T

63

65

15

0 ~ 8

XDW-15-65-VT

64

65

18

XDW-18-65-0T

65

65

16

XDWS-16-65NF-0T

66

65

16

XDWS-16-65NF-8T

67

65

17

0 ~ 8

XDW-17-65A-VT

68

2300 ~ 2700 MHz

65

17

XDW-17-65S-W-0T

69

2500 ~ 2700 MHz

65

17

0 ~ 10

XDWM-17-65-VT

70

2300 ~ 2400 MHz

90

16

0 / 2 / 6

XDW-16-90-0T

71

90

16

0 ~ 8

XDW-16-90-VT

72

2300 ~ 2400 MHz

65

17

XXDW-17-65-0T

73

2400 ~ 2700 MHz

65

17

XXDWM-17-65-0T

74

XX-pol.

Page

Directional Antennas (3400 ~ 3600 MHz)

Type

Frequency bands

Beam() Gain(dBi) Electrical Tilt

Model name

X-pol.

3400 ~ 3600 MHz

65

17

XDWMM-17-65-0T

76

3400 ~ 3650 MHz

65

17

XDWMM-17-65B-0T

77

3400 ~ 3600 MHz

65

17

0 ~ 10

XDWMM-17-65-VT

78

3400 ~ 3600 MHz

65

17

XXDWMM-17-65-0T

79

XX-pol.

Page

ETC (LP / PATCH / INDOOR OMNI)

Type

Frequency bands

Beam() Gain(dBi) Electrical Tilt

Model name

1575.42 MHz 5 MHz

GA-1575

81

1750 ~ 2400 MHz

ALP-26PW

82

1750 ~ 2400 MHz

APIWO-2400-4

83

2300 ~ 2390 MHz

APIWS-07-70-SKT

84

ADWISP-12-45-SKT

85

AWMS-11-40

86

AWMS-07-70

87

AWMO-6-0T

88

AGP-2450

89

824 ~ 894 / 1885 ~ 2170 / 2300 ~ 2400 / 2630 ~ 2655 MHz -

ALP-08QD

90

ALP-17QD

91

PAT-CPWI-MB

92

ACIWO-MB

93

Model name

Page

2300 ~ 2700 MHz

2300 ~ 2700 MHz

824 ~ 960 / 1710 ~ 2400 / 2500 ~ 2690 MHz

Page

Accessaries

Type

Frequency bands

Beam() Gain(dBi) Electrical Tilt

RETU-AISG20

95

ACS1100

96

BIAS-T

97

Smart BIAS-T

98

700 ~ 1000 MHz

BASE STATION ANTENNAS

Directional Antennas
(700 ~ 1000 MHz)
type

X-pol.
XDGL-17-33S-VT
XDGL-15-65-VT
XDGL-16-65-0T
XDGL-15-65-4T
XDGL-15-65-8T
XDGL-16-65-VT
XDGL-18-65-0T
XDGL-18-65-4T
XDGL-18-65-9T
XDGL-17-65-VT
XDGL-16-90-0T
XDGL-16-90-4T
XDGL-16-90-8T
XDGL-16-90-VT

9_
10_
11_
12_
13_
14_

page

page

page

page

page

page

15_
16_
17_
18_
19_
20_
21_
22_

page

page

page

page

page

page

page

page

700 ~ 1000 MHz

BASE STATION ANTENNAS

XDGL-17-33S-VT
ELECTRICAL SPECIFICATIONS

Coming
Soon

Frequency range

824 ~ 894 MHz

Gain

17.2 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

35 5

Vertical

13 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>14 dB

Front to back ratio

>25 dB

Polarization discremination

>20 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

www.aceteq.co.kr

600 x 1300 x 117 mm

Weight

25 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1742 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

TBD

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

0 ~ 10

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

XDGL-15-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 960 MHz

Gain

15 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

14 2

Electrical downtilt

0 ~ 14

Upper sidelobe suppression

15 dB

Front to back ratio

>25 dB

Polarization discremination

>20 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

Y]WUW

XZX_UW

700 ~ 1000 MHz

BASE STATION ANTENNAS

10

260 1318 117 mm

Weight

10 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

765 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

Horizontal

Vertical 7T

Vertical 0T

Vertical 14T

XX^UW

www.aceteq.co.kr

700 ~ 1000 MHz

BASE STATION ANTENNAS

XDGL-16-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 866 MHz

824 ~ 894 MHz

880 ~ 960 MHz

Gain

16.3 dBi

16.5 dBi

16.8 dBi

Horizontal

69

68

Vertical

10.5

10.1

Polarization
-3 dB Beam width

Dual, 45
66

Electrical tilt
Upper sidelobe suppression
Front to back ratio
Polarization discremination

9.6
0
>15 dB

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION

YWWWUW

Y]WUW

www.aceteq.co.kr

Dimensions (WxHxD)

260 2000 117 mm

Weight

9 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1161 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

XX^UW

Horizontal

Vertical

11

XDGL-16-65-4T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 866 MHz

824 ~ 894 MHz

880 ~ 960 MHz

Gain

16.3 dBi

16.5 dBi

16.8 dBi

Horizontal

69

68

Vertical

10.5

10.1

Polarization
-3 dB Beam width

Dual, 45
66

Electrical tilt
Front to back ratio
Polarization discremination

9.6
4

Upper sidelobe suppression

>15 dB
Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION

Y]WUW

YWWWUW

700 ~ 1000 MHz

BASE STATION ANTENNAS

12

Dimensions (WxHxD)

260 2000 117 mm

Weight

9 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1161 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

XX^UW

Horizontal

Vertical

www.aceteq.co.kr

700 ~ 1000 MHz

BASE STATION ANTENNAS

XDGL-16-65-8T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 866 MHz

824 ~ 894 MHz

880 ~ 960 MHz

Gain

16.3 dBi

16.5 dBi

16.7 dBi

Horizontal

69

68

Vertical

10.5

10.1

Polarization
-3 dB Beam width

Dual, 45
66

Electrical tilt
Upper sidelobe suppression
Front to back ratio
Polarization discremination

9.6
8
>15 dB

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION

YWWWUW

Y]WUW

www.aceteq.co.kr

Dimensions (WxHxD)

260 2000 117 mm

Weight

9 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1161 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

XX^UW

Horizontal

Vertical

13

XDGL-16-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 866 MHz

824 ~ 894 MHz

880 ~ 960 MHz

Gain

16.0 dBi

16.1 dBi

16.2 dBi

Horizontal

69

68

Vertical

10.5

10.1

Polarization
-3 dB Beam width

Dual, 45
66
9.6

Electrical tilt

0 ~ 12

Upper sidelobe suppression

>15 dB

Front to back ratio


Polarization discremination

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 1999.5 117 mm

Weight

10 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1161 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

Horizontal

Vertical 5T

Vertical 0T

Vertical 12T

GG[WUW
GG`WUW
Y]WUW

XWUW

XX^UW

X```U\

700 ~ 1000 MHz

BASE STATION ANTENNAS

14

www.aceteq.co.kr

700 ~ 1000 MHz

BASE STATION ANTENNAS

XDGL-18-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 960 MHz

Gain

17.8 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>17 dB

Front to back ratio

>30 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 2568 117 mm

Weight

18.5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1491 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 7

[WUW`WUW
Y]WUW

^UW

XX^UW

Vertical

Y\]_UW

Y\`_UW

Horizontal

www.aceteq.co.kr

15

XDGL-18-65-4T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 960 MHz

Gain

17.8 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>17 dB

Front to back ratio

>30 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 2568 117 mm

Weight

18.5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1491 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 7

[WUW`WUW
Y]WUW

^UW

XX^UW

16

Vertical

Y\]_UW

Horizontal
Y\`_UW

700 ~ 1000 MHz

BASE STATION ANTENNAS

www.aceteq.co.kr

700 ~ 1000 MHz

BASE STATION ANTENNAS

XDGL-18-65-9T
ELECTRICAL SPECIFICATIONS
Frequency range

890 ~ 960 MHz

Gain

17.7 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>17 dB

Front to back ratio

>28 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 2568 117 mm

Weight

18.5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1491 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 7

[WUW`WUW
Y]WUW

^UW

XX^UW

Vertical

Y\]_UW

Y\`_UW

Horizontal

www.aceteq.co.kr

17

XDGL-17-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 866 MHz

824 ~ 894 MHz

880 ~ 960 MHz

Gain

16.8 dBi

16.9 dBi

17.2 dBi

Horizontal

69

68

Vertical

7.9

7.6

Polarization
-3 dB Beam width

Dual, 45
66
7.1

Electrical tilt

0 ~ 10

Upper sidelobe suppression


Front to back ratio
Polarization discremination

>14 dB

>15 dB

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 2568 117 mm

Weight

18.5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1491 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 7

Horizontal

Vertical 5T

Vertical 0T

Vertical 10T

GG[WUW
GG`WUW

18

^UW

XX^UW

Y\]_UW

Y]WUW

Y\`_UW

700 ~ 1000 MHz

BASE STATION ANTENNAS

www.aceteq.co.kr

700 ~ 1000 MHz

BASE STATION ANTENNAS

XDGL-16-90-0T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 960 MHz

Gain

16.6 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

90 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>14 dB

Front to back ratio

>23 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 x 2600 x 117 mm

Weight

17 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1510 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 8

GG[WUW
GG`WUW
Y]WUW

_UW

XX^UW

Vertical

Y]WWUW

Y]ZWUW

Horizontal

www.aceteq.co.kr

19

XDGL-16-90-4T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 960 MHz

Gain

16.6 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

90 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>14 dB

Front to back ratio

>23 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 x 2600 x 117 mm

Weight

17 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1510 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 8

GG[WUW
GG`WUW
Y]WUW

_UW

XX^UW

20

Vertical

Y]WWUW

Horizontal
Y]ZWUW

700 ~ 1000 MHz

BASE STATION ANTENNAS

www.aceteq.co.kr

700 ~ 1000 MHz

BASE STATION ANTENNAS

XDGL-16-90-8T
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 960 MHz

Gain

16.4 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

90 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>14 dB

Front to back ratio

>23 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 x 2600 x 117 mm

Weight

17 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1510 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 8

GG[WUW
GG`WUW
Y]WUW

_UW

XX^UW

Vertical

Y]WWUW

Y]ZWUW

Horizontal

www.aceteq.co.kr

21

XDGL-16-90-VT
ELECTRICAL SPECIFICATIONS
Frequency range

824 ~ 894 MHz

Gain

16.1 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

90 5

Vertical

7 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>14 dB

Front to back ratio

>23 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 x 2600 x 117 mm

Weight

17 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

1510 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 8

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

GG[WUW
GG`WUW

22

_UW

XX^UW

Y]WWUW

Y]WUW

Y]ZWUW

700 ~ 1000 MHz

BASE STATION ANTENNAS

www.aceteq.co.kr

Directional Antennas
(1700 ~ 2200 MHz)
type

XDH-19-33B-6T
XDH-19-33S-VT
XDPH-17-65S-0T
XDH-18-65-0T

X-pol.
24_
25_
26_
page

page

page

27_
28_
29_

page

XDH-18-65-2T
XDH-18-65-6T
XDH-17-65-VT-USS

page

XDH-19-65-0T
XDH-19-65-4T
XDH-19-65-8T
XDH-19-65-VT
XDH-15-90B-0T
XDH-16-90-VT

page

30_
31_
32_
33_
34_
35_
36_

page

page

page

page

page

page

type

XDHH-18-65-0T
XDHH-18-65-2T
XDHH-18-65-6T
XDHH-18-65-VT

page

XX-pol.
37_
38_
39_
40_
page

page

page

page

type

XDH-18-65-iVT

iRET
41_

page

1700 ~ 2200 MHz

BASE STATION ANTENNAS

BASE STATION ANTENNAS

XDH-19-33B-6T
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 2170 MHz

Gain

19.3 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

33 5

Vertical

8 2

Electrical downtilt

Upper sidelobe suppression

>13 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)
Weight

10.5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

737 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 20

[WUW`WUW

YW

ZWWUW

300 1100 70 mm

^WUW

Vertical

XXWWUW

Horizontal

24

www.aceteq.co.kr

BASE STATION ANTENNAS

XDH-19-33S-VT
Frequency range

1710 ~ 2170 MHz

Gain

19.3 dBi

Polarization
-3 dB Beam width

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

Dual, 45
Horizontal

33 5

Vertical

7 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>14 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

PIMD (@243 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

www.aceteq.co.kr

323 1300 82 mm

Weight

10 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

938 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 20

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

25

BASE STATION ANTENNAS

XDPH-17-65S-0T
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 2170 MHz

Gain

17.8 dBi

Polarization
-3 dB Beam width

Dual 45
Horizontal

63 6

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 1350 78 mm

Weight

6 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

360 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

GG[WUW
GG^WUW
X\_UW

YWUW

^_UW

Vertical

XZ\WUW

Horizontal

26

www.aceteq.co.kr

BASE STATION ANTENNAS

XDH-18-65-0T
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.9 dBi

18.1 dBi

Horizontal

66

65

Vertical

7.1

6.6

Polarization
-3 dB Beam width

Dual, 45

Electrical tilt

Polarization discremination

62
6.1
0

Upper sidelobe suppression


Front to back ratio

18.3 dBi

>15 dB
Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>18 dB
10 dB

Tracking (60)

<3 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions(WxHxD)

158 x 1285.2 x 78 mm

Weight

7.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

343 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

GG[WUW
GG^WUW
X\_UW

XWUW

^_UW

Vertical

XY_\UY

Horizontal

www.aceteq.co.kr

27

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

BASE STATION ANTENNAS

XDH-18-65-2T
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain(0-5T)

17.9 dBi

18.1 dBi

Horizontal

66

65

Vertical

7.1

6.6

Polarization
-3 dB Beam width

Dual, 45

Electrical tilt

Polarization discremination

62
6.1
2

Upper sidelobe suppression


Front to back ratio

18.3 dBi

>15 dB
Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>18 dB
10 dB

Tracking (60)

<3 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 x 1285.2 x 78 mm

Weight

7.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

343 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

[WUW
^WUW
X\_UW

XWUW

^_UW

Vertical

XY_\UY

Horizontal

28

www.aceteq.co.kr

BASE STATION ANTENNAS

XDH-18-65-6T
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.7 dBi

17.9 dBi

Horizontal

66

65

Vertical

7.1

6.6

Polarization
-3 dB Beam width

Dual, 45

Electrical tilt

Polarization discremination

62
6.1
6

Upper sidelobe suppression


Front to back ratio

18.1 dBi

>15 dB
Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>18 dB
10 dB

Tracking (60)

< 3 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 x 1285.2 x 78 mm

Weight

7.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

343 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

GG[WUW
GG^WUW
X\_UW

XWUW

^_UW

Vertical

XY_\UY

Horizontal

www.aceteq.co.kr

29

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

BASE STATION ANTENNAS

XDH-17-65-VT-USS
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.7 dBi

17.9 dBi

Horizontal

66

65

Vertical

7.7

7.5

Polarization
-3 dB Beam width

Dual, 45

Electrical tilt

Polarization discremination

62
7.1
0 ~ 10

Upper sidelobe suppression


Front to back ratio

18 dBi

>15 dB

>20 dB (@2-5T)

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>18 dB
10 dB

Tracking (60)

< 3 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION

XY_\UY

X\_UW

30

XW

Dimensions (WxHxD)

158 x 1285.2 x 78 mm

Weight

7.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

343 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

Horizontal

Vertical 5T

Vertical 0T

Vertical 10T

^_UW [WUW^WUW

www.aceteq.co.kr

BASE STATION ANTENNAS

XDH-19-65-0T
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain(0-6T)

19 dBi

19.2 dBi

Horizontal

65

62

Vertical

4.7

4.4

Polarization
-3 dB Beam width

Dual, 45
60
4.2

Electrical tilt

Upper sidelobe suppression


Front to back ratio
Polarization discremination

19.5 dBi

>14 dB

>15 dB

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

Tracking (60)

>14 dB

<2.5 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION

X\_UW

XW

Dimensions (WxHxD)

158 x 1946 x 78 mm

Weight

10.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

520 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

^_UW [WUW^WUW

Vertical

X`[]UW

Horizontal

www.aceteq.co.kr

31

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

BASE STATION ANTENNAS

XDH-19-65-4T
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~1880 MHz

1850 ~1990 MHz

1920 ~ 2170 MHz

Gain(0-6T)

19 dBi

19.2 dBi

19.5 dBi

Horizontal

65

62

Vertical

4.7

4.4

Polarization
-3 dB Beam width

Dual, 45
60
4.2

Electrical tilt

Upper sidelobe suppression


Front to back ratio
Polarization discremination

>14 dB

>15 dB

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

Tracking (60)

>14 dB

<2.5 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION

X\_UW

XW

Dimensions (WxHxD)

158 x 1946 x 78 mm

Weight

10.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

520 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

^_UW [WUW^WUW

Vertical

X`[]UW

Horizontal

32

www.aceteq.co.kr

BASE STATION ANTENNAS

XDH-19-65-8T
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain(0-6T)

18.8 dBi

19.0 dBi

Horizontal

65

62

Vertical

4.7

4.4

Polarization
-3 dB Beam width

Dual, 45
60
4.2

Electrical tilt

Upper sidelobe suppression


Front to back ratio
Polarization discremination

19.3 dBi

>14 dB

>15 dB

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

Tracking (60)

>14 dB

<2.5 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION

X\_UW

XW

Dimensions (WxHxD)

158 x 1946 x 78 mm

Weight

10.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

520 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

^_UW [WUW^WUW

Vertical

X`[]UW

Horizontal

www.aceteq.co.kr

33

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

BASE STATION ANTENNAS

XDH-19-65-VT
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

18.7 dBi

18.8 dBi

Horizontal

65

62

Vertical

4.7

4.4

Polarization
-3 dB Beam width

Dual, 45

Electrical tilt

Polarization discremination

60
4.2
0 ~ 6

Upper sidelobe suppression


Front to back ratio

19.1 dBi

>14 dB

>15 dB

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

Tracking (60)

>14 dB

<2.5 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 x 1946 x 78 mm

Weight

10.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

520 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70mm)

Mechanical downtilt

0 ~ 10

Horizontal

Vertical 3T

Vertical 0T

Vertical 6T

GG[WUW
GG^WUW

XWUW

^_UW

X`[]UW

X\_UW

34

www.aceteq.co.kr

BASE STATION ANTENNAS

XDH-15-90B-0T
Frequency range

1710 ~ 2170 MHz

Gain

16.5 dBi

Polarization
-3 dB Beam width

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

Dual 45
Horizontal

90 5

Vertical

6 2

Electrical downtilt

Upper sidelobe suppression

>13 dB

Front to back ratio

>25 dB

Polarization discremination

>13 dB

Impedance

50

VSWR

<1.3

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

150 1300 70 mm

Weight

7 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

330 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 18

[WUWGG^WUW
X\WUW

X_

^WUW

Vertical

XZWWUW

Horizontal

www.aceteq.co.kr

35

BASE STATION ANTENNAS

XDH-16-90S-VT
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 2170 MHz

Gain

16.5 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

90 5

Vertical

8 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>14 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

PIMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 1380 78 mm

Weight

6 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

369 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

GG[WUW
GG^WUW

YWUW

^_UW

XZ_WUW

X\_UW

36

www.aceteq.co.kr

BASE STATION ANTENNAS

XDHH-18-65-0T
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.7 dBi

Polarization
-3 dB Beam width

17.9 dBi

Dual, 45 / Dual, 45
Horizontal

66

65

Vertical

7.1

6.6

Electrical tilt

Polarization discremination

62
6.1
0

Upper sidelobe suppression


Front to back ratio

18.0 dBi

>15 dB
Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

323 x 1295.2 x 82 mm

Weight

11.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

934 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

Horizontal

www.aceteq.co.kr

Vertical

37

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

BASE STATION ANTENNAS

XDHH-18-65-2T
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.7 dBi

Polarization
-3 dB Beam width

17.9 dBi

Dual, 45 / Dual, 45
Horizontal

66

65

Vertical

7.1

6.6

Electrical tilt

Polarization discremination

62
6.1
2

Upper sidelobe suppression


Front to back ratio

18.0 dBi

>15 dB
Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

323 x 1295.2 x 82 mm

Weight

11.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

934 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

Horizontal

38

Vertical

www.aceteq.co.kr

BASE STATION ANTENNAS

XDHH-18-65-6T
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.5 dBi

Polarization
-3 dB Beam width

17.7 dBi

Dual, 45 / Dual, 45
Horizontal

66

65

Vertical

7.1

6.6

Electrical tilt

Polarization discremination

62
6.1
6

Upper sidelobe suppression


Front to back ratio

17.8 dBi

>15 dB
Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

323 x 1295.2 x 82 mm

Weight

11.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

934 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

Horizontal

www.aceteq.co.kr

Vertical

39

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

BASE STATION ANTENNAS

XDHH-18-65-VT
1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.5 dBi

Polarization
-3 dB Beam width

17.7 dBi

Dual, 45 / Dual, 45
Horizontal

66

65

Vertical

7.1

6.6

62
6.1

Electrical tilt

0~10

Upper sidelobe suppression

>15 dB

Front to back ratio


Polarization discremination

17.8 dBi

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

>10 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION

40

Dimensions (WxHxD)

323 x 1295.2 x 82 mm

Weight

11.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

934 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 10

Horizontal

Vertical 5T

Vertical 0T

Vertical 10T

www.aceteq.co.kr

BASE STATION ANTENNAS

XDH-18-65-iVT
Frequency range

1710 ~ 1880 MHz 1850 ~ 1990 MHz 1920 ~ 2170 MHz

Gain

17.5 dBi

17.6 dBi

Polarization
-3 dB Beam width

Horizontal

66

65

Vertical

7.0

6.7

62
6.3

Electrical tilt

0 ~ 15

Upper sidelobe suppression (0-10T)

>17 dB

Upper sidelobe suppression (10-15T)

>15 dB

Front to back ratio


Polarization discremination

17.7 dBi

Dual, 45

Horizontal

>25 dB

Vertical

>25 dB

>20 dB

60

>10 dB

> 8 dB

Tracking (60)

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 x 1295.2 x 78 mm

Weight

7.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

346 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 10

Horizontal

Vertical 10T

Vertical 0T

Vertical 15T

GG[WUW
GG^WUW

XY`\UYG

X\_UW

www.aceteq.co.kr

XWUW

^_UW

41

1700 ~ 2200 MHz

ELECTRICAL SPECIFICATIONS

BASE STATION ANTENNAS

Directional Antennas
(Multi band)

Multi band

type

Dual band
XDLH-15-65-VT
XDLH-17-65-0T
XDLH-17-65-4T
XDLH-17-65-VT
XDLH-17-19-65-VT
XDLH-15-90S-VT

43_
44_
45_
46_
48_
50_

page

page

page

page

page

page

type

Triple band
XDLHH-16-65-VT

51_

page

BASE STATION ANTENNAS

XDLH-15-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790~866 MHz

824~894 MHz

880~960 MHz

1710~1880 MHz 1850~1990 MHz 1920~2170 MHz

Gain

15.3 dBi

15.5 dBi

15.8 dBi

17.5 dBi

17.9 dBi

18.1 dBi
58

Dual, 45

-3 dB Beam width

Horizontal 67

66

64

62

62

Vertical

8.4

8.1

8.2

8.0

8.6

Electrical tilt
Upper sidelobe suppression
Front to back ratio
Polarization
discremination

7.8

0 ~ 8

0 ~ 10

>15 dB (0 ~ 4), >14 dB (5 ~ 7), >13 dB (8)

>13 dB

>24 dB

>21 dB

Horizontal
Vertical

>25 dB

>18 dB

60

>10 dB

Tracking (60)

Multi band

Polarization

>24 dB
>7 dB

>12 dB

>15 dB

>14 dB

>10 dB

>7 dB

> 6 dB

< 3 dB

< 2 dB

Impedance

50

VSWR

<1.5

Isolation between ports (In band)

>30 dB

Isolation between ports (Inter band)

>40 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

400 W

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)
Weight

19.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

1161 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

LOW BAND

HIGH BAND

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

www.aceteq.co.kr

260 2000 140 mm

Vertical 5T

Vertical 0T

43

BASE STATION ANTENNAS

XDLH-17-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

790~866 MHz

824~894 MHz

880~960 MHz

1710~1880 MHz 1850~1990 MHz 1920~2170 MHz

Gain

16.5 dBi

16.8 dBi

17 dBi

16.5 dBi

Polarization
-3 dB Beam width

Dual, 45
66

64

62

62

58

Vertical

7.4

7.1

6.7

6.2

5.8

7.6

Multi band

Upper sidelobe suppression

Polarization
discremination

16.8 dBi

Dual, 45

Horizontal 67

Electrical tilt
Front to back ratio

17.1 dBi

>15 dB

Horizontal

>24 dB

Vertical

>25 dB

>18 dB

60

>10 dB

Tracking (60)

>24 dB
>12 dB

>14 dB

>10 dB

< 3 dB

< 2 dB

Impedance

50

VSWR

<1.5

Isolation between ports (In band)

>30 dB

Isolation between ports (Inter band)

>40 dB

IMD (@2x43 dBm)

>15 dB

>150 dBc

Maximum input power

400 W

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

44

260 2578.4 140 mm

Weight

19.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

1497 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

LOW BAND

HIGH BAND

Horizontal

Horizontal

Vertical

Vertical

www.aceteq.co.kr

BASE STATION ANTENNAS

XDLH-17-65-4T
ELECTRICAL SPECIFICATIONS
Frequency range

790~866 MHz

824~894 MHz

880~960 MHz

1710~1880 MHz 1850~1990 MHz 1920~2170 MHz

Gain

16.5 dBi

16.8 dBi

17 dBi

16.5 dBi

Polarization

66

64

62

62

58

Vertical

7.4

7.1

6.7

6.2

5.8

7.6

Upper sidelobe suppression

Polarization
discremination

16.8 dBi

Dual, 45

Horizontal 67

Electrical tilt
Front to back ratio

17.1 dBi

>15 dB

Horizontal

Multi band

-3 dB Beam width

Dual, 45

>24 dB

Vertical

>25 dB

>18 dB

60

>10 dB

Tracking (60)

>24 dB
>12 dB

>14 dB

>10 dB

< 3 dB

< 2 dB

Impedance

50

VSWR

<1.5

Isolation between ports (In band)

>30 dB

Isolation between ports (Inter band)

>40 dB

IMD (@2x43 dBm)

>15 dB

>150 dBc

Maximum input power

400 W

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

www.aceteq.co.kr

260 2578.4 140 mm

Weight

19.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

1497 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

LOW BAND

HIGH BAND

Horizontal

Horizontal

Vertical

Vertical

45

BASE STATION ANTENNAS

XDLH-17-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790~866 MHz

824~894 MHz

880~960 MHz

1710~1880 MHz 1850~1990 MHz 1920~2170 MHz

Gain

16.5 dBi

16.7 dBi

17 dBi

17.5 dBi

Polarization
-3 dB Beam width

Multi band

58

66

64

62

62

Vertical

7.4

7.1

6.7

6.2

7.6

Upper sidelobe suppression

Polarization
discremination

18.1 dBi

Horizontal 67

Electrical tilt
Front to back ratio

17.8 dBi

Dual, 45
5.8

0 ~ 8

0 ~ 10

>15 dB (0 ~ 4), >14 dB (5 ~ 7), >13 dB (8)

>13 dB

>24 dB

>21 dB

Horizontal
Vertical

>25 dB

>18 dB

60

>10 dB

Tracking (60)

>24 dB
>7 dB

>12 dB

>15 dB

>14 dB

>10 dB

>7 dB

>6 dB

<3 dB

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports (In band)

>30 dB

Isolation between ports (Inter band)

>40 dB

IMD (@2x43 dBm)

>150 dBc

Maximum input power

400 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

46

Weight

19.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

1497 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

X[WUW

Y\^_U[

Y]W_U[

Y^W`U\

Y]WUW

260 2578.4 140 mm

www.aceteq.co.kr

HIGH BAND

www.aceteq.co.kr

Horizontal

Vertical 5T

Vertical 0T

Vertical 8T

Horizontal

Vertical 5T

Vertical 0T

Vertical 8T

Multi band

LOW BAND

47

BASE STATION ANTENNAS

XDLH-17-19-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790~866 MHz

824~894 MHz

880~960 MHz

1710~1880 MHz 1850~1990 MHz 1920~2170 MHz

Gain

16.7 dBi

16.8 dBi

17.1 dBi

18.7 dBi

Polarization
-3 dB Beam width

Multi band

58

66

64

60

61

Vertical

7.4

7.1

4.8

4.6

7.6

0 ~ 8
15 dB

Horizontal

25 dB

Vertical

>25 dB

0
60

4.2
0 ~ 6

Upper sidelobe suppression

Polarization
discremination

19.1 dBi

Horizontal 67

Electrical tilt
Front to back ratio

19.0 dBi

Dual, 45

>18 dB
>8 dB

>10 dB

Tracking (60)

>15 dB
>8 dB

>8 dB

<3dB

>8 dB

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports (In band)

>30 dB

Isolation between ports (Inter band)

>40 dB

IMD (@2x43 dBm)

>10 dB

>150 dBc

Maximum input power

400 W

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)
Weight

19.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

1497 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

X[WUW

Y\^_U[

Y]WUW

260 2578.4 140 mm

48

www.aceteq.co.kr

HIGH BAND

www.aceteq.co.kr

Horizontal

Vertical 5T

Vertical 0T

Vertical 8T

Horizontal

Vertical 3T

Vertical 0T

Vertical 6T

Multi band

LOW BAND

49

BASE STATION ANTENNAS

XDLH-15-90S-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790~866 MHz

824~894 MHz

880~960 MHz

1710~1880 MHz 1850~1990 MHz 1920~2170 MHz

Gain

16.1 dBi

16.3 dBi

16.5 dBi

17.8 dBi

Polarization
-3 dB Beam width

Dual, 45
86

85

87

86

Vertical

7.4

7.1

4.8

4.6

7.6

Multi band

0 ~ 8

85
4.2
0 ~ 6

Upper sidelobe suppression

15 dB

Front to back ratio

25 dB

Horizontal
Vertical

>25 dB

>25 dB

>18 dB

>15 dB

60

>8 dB

>10dB

Tracking (60)

>8 dB

>8 dB

<3 dB

>10 dB

>8 dB

<2 dB

Impedance

50

VSWR

<1.5

Isolation between ports (In band)

>30 dB

Isolation between ports (Inter band)

>40 dB

IMD (@2x43 dBm)

17.9 dBi

Dual, 45

Horizontal 87

Electrical tilt

Polarization
discremination

18.0 dBi

>150 dBc

Maximum input power

400 W

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)
Weight

19.0 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

1497 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

X[WUW

Y\^_U[

Y]WUW

260 2578.4 140 mm

50

www.aceteq.co.kr

HIGH BAND

www.aceteq.co.kr

Horizontal

Vertical 5T

Vertical 0T

Vertical 10T

Horizontal

Vertical 3T

Vertical 0T

Vertical 6T

Multi band

LOW BAND

51

BASE STATION ANTENNAS

XDLHH-16-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

790 ~ 960 MHz (LB)

1710~2170 MHz (HB1) 1710~2170 MHz (HB2)

Gain (nominal)

16.1 dBi

15.8 dBi

Polarization

Dual 45

-3 dB Beam width Horizontal

65 5

Vertical

Multi band

15.8 dBi

10 1.5

Electrical downtilt range

0~ 10

Upper side lobe suppression

>15 dB

Front to back ratio

>25 dB

IMD (@2x43 dBm)

>150 dBc

Cross polar ratio (60)

>10 dB

VSWR

<1.5

Isolation between ports

> 30 dB

Maximum power per input

400 W

300 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

260 x 2300 x 140 mm

Weight

20 kg (without clamp)

Connector type

7/16 DIN Female x 6

Wind load

1387 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (50 ~ 115 mm)

Mechanical downtilt

GG\WUW
GGXX\UW
X[WUW WUZ

YZWWUW YUW

Y]WUW WU\

52

www.aceteq.co.kr

BASE STATION ANTENNAS

Directional Antennas
(2300 ~ 2700 MHz)
type

X-pol.
XDW-19-33-0T
54_
XDW-19-33-2T
55_
56_
XDW-19-33-6T
XDW-19-33-VT
57_
58_
XDWM-19-33-0T
XDW-19-45S-0T
59_
XDWM-19-45S-0T
60_
XDWS-14-65NF-0T
61_
XDW-15-65-2T
62_
XDW-15-65-6T
63_
XDW-15-65-VT
64_
XDW-18-65-0T
65_
XDWS-16-65NF-0T
66_
XDWS-16-65NF-8T
67_
XDW-17-65A-VT
68_
XDW-17-65S-W-0T
69_
XDWM-17-65-VT
70_
XDW-16-90-0T/2T/6T
71_
XDW-16-90-VT
72_
page

page

page

page

page

page

page

page

page

page

page

page

page

page

page

page

page

page

type

XXDW-17-65-0T
XXDWM-17-65-0T

XX-pol.
73_
74_
page

page

2300 ~ 2700 MHz

page

BASE STATION ANTENNAS

XDW-19-33-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>19 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

33 3

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

220 990.4 70 mm

Weight

6.2 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

486 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 25

[WUW^WUW
YYWUW

Y\

^WUW

Vertical

``WU[

Horizontal

54

www.aceteq.co.kr

BASE STATION ANTENNAS

XDW-19-33-2T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>19 dBi

-3 dB Beam width

Dual, 45
Horizontal

33 3

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

220 990.4 70 mm

Weight

6.2 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

486 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 25

[WUW^WUW
YYWUW

Y\

^WUW

Vertical

``WU[

Horizontal

www.aceteq.co.kr

55

BASE STATION ANTENNAS

XDW-19-33-6T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>19 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

33 3

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

First null-ll

N/A

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

220 990.4 70 mm

Weight

6.2 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

486 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 25

[WUW^WUW
YYWUW

Y\

^WUW

Vertical

``WU[

Horizontal

56

www.aceteq.co.kr

BASE STATION ANTENNAS

XDW-19-33-VT
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>19 dBi

-3 dB Beam width

Dual, 45
Horizontal

33 5

Vertical

7 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

220 1217 70 mm

Weight

7.5 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

598 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

[W^W
YW

^WUW

XYX^UW

YYWUW

www.aceteq.co.kr

57

BASE STATION ANTENNAS

XDWM-19-33-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2500 ~ 2700 MHz

Gain

>19 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

33 3

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

220 917.4 70 mm

Weight

6.2 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

452 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 25

Horizontal

58

Vertical

www.aceteq.co.kr

BASE STATION ANTENNAS

XDW-19-45S-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2400 MHz

Gain

>19 dBi

-3 dB Beam width

Dual, 45
Horizontal

45 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION

X\_UW

YWUW

Dimensions (WxHxD)

158 x 1379.8 x 78 mm

Weight

6 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

369 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA +PC

Mounting interface

Pole mounting (70 ~ 100 mm)

Mechanical downtilt

0 ~ 20

^_UW ^WUWGGXWWUW

Vertical

XZ^`U_

Horizontal

www.aceteq.co.kr

59

BASE STATION ANTENNAS

XDWM-19-45S-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2500 ~ 2700 MHz

Gain

>19 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

45 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 1380 78 mm

Weight

6 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

369 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

[WUW
^WUW
X\_UW

YWUW

^_UW

Vertical

XZ_WUW

Horizontal

60

www.aceteq.co.kr

BASE STATION ANTENNAS

XDWS-14-65NF-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>14.0 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

13 2

Electrical tilt

Upper sidelobe suppression

>18 dB (0~+30)

Polarization discremination

Horizontal

>23 dB (-180 30)

Vertical

>23 dB (-180 60)

>18 dB

60

> 8 dB

2300 ~ 2700 MHz

Front to back ratio

Tracking (60)

< 3 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>25 dB

IMD (@2x43 dBm)

>150 dBc

Null-Fill

<5 dB (0~-30)

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 720 78 mm

Weight

5.5 kg (without clamp)

Connector type

7/16 DIN Female 2

Wind load

192 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

[WUW^WUW
X\_UW

YWUW

^_UW

Vertical

^YWUW

^\\UZ

Horizontal

www.aceteq.co.kr

61

BASE STATION ANTENNAS

XDW-15-65-2T
ELECTRICAL SPECIFICATIONS
Frequency range

2300~2390 MHz

Gain

>15.5 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

13 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

150 680 70 mm

Weight

3.9 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

173 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 30

[WUWGG^WUW
X\WUW

ZW
^WUW

Vertical

]_WUW

Horizontal

62

www.aceteq.co.kr

BASE STATION ANTENNAS

XDW-15-65-6T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>15.5 dBi

-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

13 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

150 680 70mm

Weight

3.9 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

173 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 30

[WUWGG^WUW
X\WUW

ZW
^WUW

Vertical

]_WUW

Horizontal

www.aceteq.co.kr

63

BASE STATION ANTENNAS

XDW-15-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>15 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

13 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

X\WUW

Weight

5.0 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

174 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 30

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

[WUWGG
^WUW
^WUW

]_ZUW

ZW

150 683 70 mm

64

www.aceteq.co.kr

BASE STATION ANTENNAS

XDW-18-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2400 MHz

Gain

>18 dBi

-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

6.5 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.4

Isolation between ports

>30 dB

IMD (@243 dBm)

>140 dBc

Maximum input power

200 W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

120 1258 55 mm

Weight

5 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

255 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

F.R.P

Mounting interface

Pole mounting (40 ~ 70 mm or 70 ~ 100 mm (option))

Mechanical downtilt

0 ~ 20

[WUW^WUW

XY\_UW

XYWUW

www.aceteq.co.kr

Y\UW

\\UW

Horizontal

Vertical

65

BASE STATION ANTENNAS

XDWS-16-65NF-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>16.0 dBi

Polarization
-3 dB Beam width

65 5

Vertical

7 2

Electrical tilt

Upper sidelobe suppression

>18 dB(0~+30)

Front to back ratio


Polarization discremination
2300 ~ 2700 MHz

Dual, 45
Horizontal

Horizontal

>25 dB (-180 30)

Vertical

>25 dB (-180 60)

>18 dB

60

>8 dB

Tracking (60)

<3 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>25 dB

IMD (@2x43 dBm)

>150 dBc

Null-Fill

<15 dB(0~ -25)

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 1361.8 78 mm

Weight

7.2 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

364 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

[WUW^WUW

XZ]XU_

X\_UW

66

Y Z

^_UW

Horizontal

Vertical

www.aceteq.co.kr

BASE STATION ANTENNAS

XDWS-16-65NF-8T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>16.5 dBi

Polarization

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical tilt

Upper sidelobe suppression

>13 dB

Front to back ratio


Polarization discremination

Horizontal

>25 dB (-180 30)

Vertical

>25 dB (-180 60)

>18 dB

60

>8 dB

Tracking (60)

<3 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@2x43 dBm)

>140 dBc

First null-ll

<13 dB

Maximum input power

200 W

2300 ~ 2700 MHz

-3 dB Beam width

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

120 1257 55 mm

Weight

4.8 kg (without clamp)

Connector type

7/16 DIN Female 2

Wind load

255 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

F.R.P

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 18

[WUW^WUW

XYWUW

\\UW

X_UW

X\

XW

\
XW

XY\^UW

X\

www.aceteq.co.kr

Horizontal

Vertical

67

BASE STATION ANTENNAS

XDW-17-65A-VT
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>17 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 1299.1 78 mm

Weight

6.5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

317 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

GG[WUW
GG^WUW

YWUW

^_UW

XY``UX

X\_UW

68

www.aceteq.co.kr

BASE STATION ANTENNAS

XDW-17-65S-W-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2700 MHz

Gain

>17 dBi

-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

400W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

158 1115.4 78 mm

Weight

3.7 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

327 N (@60 m/s)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

[WUW^WUW
X\_UW

YW

^_UW

Vertical

XXX\U[

Horizontal

www.aceteq.co.kr

69

BASE STATION ANTENNAS

XDWM-17-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

2500 ~ 2700 MHz

Gain

>17 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

0 ~10

Upper sidelobe suppression

>14 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

MECHANICAL SPECIFICATION

XYY\UW

XZWYUW

70

158 1225 78 mm

Weight

5.8 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

327 N (@60 m/s)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

Horizontal

Vertical 5T

Vertical 0T

Vertical 10T

[WUW^WUW

YWUW

X\_UW

Dimensions (WxHxD)

^_UW

www.aceteq.co.kr

BASE STATION ANTENNAS

XDW-16-90-0T/2T/6T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>16 dBi

-3 dB Beam width

Dual, 45
Horizontal

90 5

Vertical

7 2

Electrical downtilt

0/2/6

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

150 1300 70 mm

Weight

6.0 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

330 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 18

XDW-16-90-0T

Horizontal

Vertical

XDW-16-90-2T

Horizontal

Vertical

XDW-16-90-6T

Horizontal

Vertical

[WUW^WUW
X_UW

^WUW

XZZ\UZ
XZWWUW

X\WUW

www.aceteq.co.kr

71

BASE STATION ANTENNAS

XDW-16-90-VT
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>16 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45
Horizontal

90 5

Vertical

7 2

Electrical downtilt

0 ~ 8

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>18 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

IMD (@243 dBm)

>150 dBc

Maximum input power

200 W

MECHANICAL SPECIFICATION
Dimensions (WxHxD)
Weight

5.5 kg (with clamp)

Connector type

7/16 DIN Female x 2

Wind load

354 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 18

Horizontal

Vertical 4T

Vertical 0T

Vertical 8T

[W^W

YWUW

X\WUW

150 x 1308 x 70 mm

XZW_UW

^WUW

72

www.aceteq.co.kr

BASE STATION ANTENNAS

XXDW-17-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300~2400 MHz

Gain

>17 dBi

-3 dB Beam width

Dual, 45 / Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>10 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

2300 ~ 2700 MHz

Polarization

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

323 1258 82 mm

Weight

10 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

907 N (@42 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 20

Horizontal

www.aceteq.co.kr

Vertical

73

BASE STATION ANTENNAS

XXDWM-17-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2700 MHz

Gain

>17 dBi

Polarization

2300 ~ 2700 MHz

-3 dB Beam width

Dual, 45 / Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

0 1

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>10 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

MECHANICAL SPECIFICATION

ZYZUW

YWUW

Dimensions (WxHxD)

323 998.4 82 mm

Weight

7.1 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

720 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 20

_YUW

Vertical

``_U[

Horizontal

74

www.aceteq.co.kr

BASE STATION ANTENNAS

Directional Antennas
(3400 ~ 3600 MHz)
type

X-pol.
76_
XDWMM-17-65-0T
XDWMM-17-65B-0T 77_
XDWMM-17-65-VT
78_
page

page

page

type

XX-pol.
XXDWMM-17-65-0T 79_

3400 ~ 3600 MHz

page

BASE STATION ANTENNAS

XDWMM-17-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

3400 ~ 3600 MHz

Gain

>17 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

3400 ~ 3600 MHz

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

150 816 70 mm

Weight

4.5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

207 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (70 ~ 100 mm)

Mechanical downtilt

0 ~ 30

^WUWXWWUW
^WUW

ZWUW

X\

YW Y\
ZW

W \
XW

X\WUW

W \ XW
X\
YW Y\

ZW

Vertical

_X]UW

Horizontal

76

www.aceteq.co.kr

BASE STATION ANTENNAS

XDWMM-17-65B-0T
ELECTRICAL SPECIFICATIONS
Frequency range

3500 ~ 3650 MHz

Gain

>17 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

Dimensions (WxHxD)

150 816 70 mm

Weight

2.9 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

207 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 30

3400 ~ 3600 MHz

MECHANICAL SPECIFICATION

[WUW^WUW
^WUW

ZWUW

X\

YW Y\
ZW

W \
XW

X\WUW

W \ XW
X\
YW Y\

ZW

Vertical

_X]UW

Horizontal

www.aceteq.co.kr

77

BASE STATION ANTENNAS

XDWMM-17-65-VT
ELECTRICAL SPECIFICATIONS
Frequency range

3400 ~ 3600 MHz

Gain

>17 dBi

Polarization
-3 dB Beam width

Dual, 45
Horizontal

65 5

Vertical

7 2

Electrical downtilt

0 ~ 10

Upper sidelobe suppression

>13 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB (@ 0 deg)

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

3400 ~ 3600 MHz

MECHANICAL SPECIFICATION
150 850 70 mm

Weight

5 kg (without clamp)

Connector type

7/16 DIN Female x 2

Wind load

216 N (@42 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 70 mm)

Mechanical downtilt

0 ~ 20

Horizontal

Vertical 5T

Vertical 0T

Vertical 10T

^WUW

__\UZ
_\WUW

X\WUW

Dimensions (WxHxD)

78

www.aceteq.co.kr

BASE STATION ANTENNAS

XXDWMM-17-65-0T
ELECTRICAL SPECIFICATIONS
Frequency range

3400 ~ 3600 MHz

Gain

>17 dBi

Polarization
-3 dB Beam width

Dual, 45/ Dual, 45


Horizontal

65 5

Vertical

7 2

Electrical downtilt

Upper sidelobe suppression

>15 dB

Front to back ratio

>25 dB

Polarization discremination

>15 dB (@ 0)

Impedance

50

VSWR

<1.5

Isolation between ports

>30 dB

Maximum input power

200 W

Dimensions (WxHxD)

323 X 1000 X 82 mm

Weight

10 kg (without clamp)

Connector type

7/16 DIN Female x 4

Wind load

587 N (@42 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

ASA + PC

Mounting interface

Pole mounting (40 ~ 70 mm (or 70 ~ 100 mm))

Mechanical downtilt

0 ~ 20

Horizontal

www.aceteq.co.kr

3400 ~ 3600 MHz

MECHANICAL SPECIFICATION

Vertical

79

REPEATER ANTENNAS

ETC
(LP / Patch / INDOOR)

ETC
(LP / PATCH / INDOOR OMNI)
81_
82_
83_
84_

ALP-08QD
ALP-17QD
ALP-26PW
APIWS-07-70-SKT
ADWISP-12-45-SKT

page

PAT-CPWI-MB
ACIWO-MB
APIWO-2400-4

page

AWMS-11-40
AWMS-07-70
AWMO-6-0T
GA-1575
AGP-2450

page

page

page

page

85_
86_
87_

page

page

88_
89_
90_
91_
92_
93_

page

page

page

page

page

REPEATER ANTENNAS

ALP-08QD
ELECTRICAL SPECIFICATIONS
Frequency range

824 ~ 894 MHz

1885 ~ 2170 MHz 2300 ~ 2400 MHz 2630 ~ 2655 MHz

Gain

>6.0 dBi

Polarization
-3 dB Beam
width

Vertical
Horizontal

60 ~ 110

Vertical

40 ~ 80

Impedance

50

VSWR

<1.5

IMD (@2x30 dBm)

>140 dBc

Maximum input power

200 W

MECHANICAL SPECIFICATION
187 450 34 mm

Weight

1.1 kg (without clamp)

Connector type

N Female 1

Wind load

47 N (@30 m/s, Frontal)

Maximum wind speed

30 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 90 mm)

Z[UW

ETC
(LP / Patch / INDOOR)

Dimensions (WxHxD)

[WUW`WUW

CDMA

WIBRO

WCDMA

SDMB

[\WUW

X_^UW

uGjvuuU
OmP

www.aceteq.co.kr

81

REPEATER ANTENNAS

ALP-17QD
ELECTRICAL SPECIFICATIONS
Frequency range

824 ~ 894 MHz

1885 ~ 2170 MHz 2300 ~ 2400 MHz 2630 ~ 2655 MHz

Gain

>10.0 dBi

Polarization
-3 dB Beam
width

Vertical
Horizontal

30 ~ 70

Vertical

30 ~ 70

Impedance

50

VSWR

<1.5

IMD (@2x30 dBm)

>140 dBc

Maximum input power

200 W

MECHANICAL SPECIFICATION
187 844 34 mm

Weight

1.3 kg (without clamp)

Connector type

N-Female 1

Wind load

88 N (@30 m/s, Frontal)

Maximum wind speed

30 m/s

Radome material

ASA

Mounting interface

Pole mounting (40 ~ 90 mm)

Z[UW

ETC
(LP / Patch / INDOOR)

Dimensions (WxHxD)

[WUW`WUW

CDMA

WIBRO

WCDMA

SDMB

_[[UW

X_^UW

uGjvuuU
OmP

82

www.aceteq.co.kr

REPEATER ANTENNAS

ALP-26PW
ELECTRICAL SPECIFICATIONS
Frequency range

1750 ~ 2400 MHz

Gain

>12 dBi

Polarization
-3 dB Beam width

Vertical
Horizontal

>28

Vertical

>28

Electrical downtilt

Front to back ratio

>15 dB

Impedance

50

VSWR

<1.4

IMD (@240 dBm)

>140 dBc

Maximum input power

100 W

Dimensions (WxHxD)

109 x 580 x 40.3 mm

Weight

1.3 kg (without clamp)

Connector type

N Female x 1

Wind load

62.7 N (@40 m/s, Frontal)

Maximum wind speed

40 m/s

Radome material

ASA

Mounting interface

Pole mounting (20.0 ~ 60.0 mm)

Mechanical downtilt

Up/Down : 30, Swing : 90

ETC
(LP / Patch / INDOOR)

MECHANICAL SPECIFICATION

[WUZ

`W
U

PCS

ZWUW

UW
`W

YWUW]WUW

WCDMA

WIBRO

XW`UW

\_WUW

ZWUW

uGjvuuU
OmP

www.aceteq.co.kr

83

REPEATER ANTENNAS

APIWS-07-70-SKT
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>7.0 dBi

Polarization
-3 dB Beam width

Vertical
Horizontal

>60

Vertical

>50

Front to back ratio

>15 dB (-180 30)

Impedance

50

VSWR
IMD (@2x40 dBm)

<1.4
3rd

>140 dBc

rd

>160 dBc

5
Maximum input power

50 W

MECHANICAL SPECIFICATION
115 x 140 x 39.8 mm

Weight

0.25 kg (without clamp)

Connector type

N Female x 1

Wind load

11 N (@30 m/s, Frontal)

Maximum wind speed

30 m/s

Radome material

ASA

Mechanical downtilt

Up/Down : -50~ 0, Swing : 50

ETC
(LP / Patch / INDOOR)

Dimensions (WxHxD)

XX\UW

Z`U_

X[WUW

W
\WU

\WU

\WU

84

Vertical

Horizontal

www.aceteq.co.kr

REPEATER ANTENNAS

ADWISP-12-45-SKT
ELECTRICAL SPECIFICATIONS
Frequency range

2300 ~ 2390 MHz

Gain

>11.5 dBi

Polarization
-3 dB Beam width

45
Horizontal

45 5

Vertical

45 5

Electrical tilt

Upper sidelobe suppression

>30 dB

Front to back ratio

Horizontal

>30 dB (-18080)

Vertical

>30 dB (-18080)

Isolation between ports

>25 dB

Impedance

50

VSWR

<1.5

IMD (@2x43 dBm)

>140 dBc

Maximum input power

100 W

MECHANICAL SPECIFICATION

YWUW

Weight

2.2 kg (without clamp)

Connector type

7/16 DIN Female Right Angle x 2

Wind load

155 N (@60 m/s, Frontal)

Maximum wind speed

60 m/s

Radome material

F.R.P

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

0 ~ 20

Y[[UW

Y[[UW

244 244 83 mm

ETC
(LP / Patch / INDOOR)

Dimensions (WxHxD)

Vertical

_ZUW

Horizontal

^VX]GkpuGjvuuU
OmGyGhP

www.aceteq.co.kr

85

REPEATER ANTENNAS | MULTI PATCH

PAT-CPWI-MB
ELECTRICAL SPECIFICATIONS
Frequency range

824 ~ 960 MHz

1710~2400/2500~2690 MHz

Gain

>5 dBi

>6.5 dBi

Horizontal

60~130

40 ~ 80

Vertical

50~110

40 ~ 80

Polarization

Vertical

Vertical

Front to back ratio

>7dB

>10 dB

Impedance

50

50

VSWR

<1.8:1

<1.6:1

Maximum input power

10 W

10 W

-3 dB Beam width

MECHANICAL SPECIFICATION
150.8 150.8 44.2 mm

Weight

0.7 kg (without clamp)

Connector type

N Female x 1

Wind load

15 N (@30 m/s, Frontal)

Maximum wind speed

30 m/s

Radome material

ASA

Mechanical downtilt

Up/Down : -50 ~ +30, Swing : 30

ETC
(LP / Patch / INDOOR)

Dimensions (WxHxD)

WIBRO

WCDMA

SDMB

X`UW

ZWUW

[[UY

ZWUW

ZWUW

86

X\WU_

X\WU_

CDMA

www.aceteq.co.kr

REPEATER ANTENNAS

ACIWO-MB
ELECTRICAL SPECIFICATIONS
Frequency range

824 ~ 960 MHz

1750 ~ 2400/2500 ~ 2690 MHz

Gain

>2 dBi

>3 dBi

Polarization
-3 dB Beam width

Vertical
Horizontal

360

Vertical

30 ~ 140

360
30 ~ 80

Impedance
VSWR

50
<1.7

<1.6

Isolation between ports

IMD (@2x37 dBm)

>140 dBc

Maximum input power

5W

MECHANICAL SPECIFICATION
Dimensions (xH)

205 x 111.7 mm
500 g

Connector type

N- Female x 1

Radome material

ASA

Mounting interface

Ceiling

ETC
(LP / Patch / INDOOR)

Weight

CDMA

WIBRO

WCDMA

SDMB

XXXU^

YW\UW

www.aceteq.co.kr

87

REPEATER ANTENNAS

APIWO-2400-4
ELECTRICAL SPECIFICATIONS
Frequency range

1750 ~ 2400 MHz

Gain

>4 dBi

Polarization
-3 dB Beam width

Vertical
Horizontal

OMNI

Vertical

>30

Electrical downtilt

Impedance

50

VSWR

<1.4

IMD (@240 dBm)

>140 dBc

Maximum input power

100 W

MECHANICAL SPECIFICATION
Dimensions(xH)

205 x 67 mm
0.5 kg (without clamp)

Connector type

N Female x 1

Radome material

ASA

Mounting interface

Ceiling

ETC
(LP / Patch / INDOOR)

Weight

]^UW

YW\UW

Vertical

88

www.aceteq.co.kr

REPEATER ANTENNAS

AWMS-11-40
ELECTRICAL SPECIFICATIONS
Frequency range

2500 ~ 2700 MHz

Gain

>11.0 dBi

Polarization
-3 dB Beam width

Vertical
Horizontal

>35

Vertical

>30

Front to back ratio

>15 dB

Impedance

50

VSWR

<1.5

Maximum input power

50 W

MECHANICAL SPECIFICATION
220 x 220 x 32 mm

Weight

1 kg (without clamp)

Connector type

SMA Female

Radome material

ASA

Mounting interface

Wall type

Mechanical downtilt

0 ~ 15

ETC
(LP / Patch / INDOOR)

Dimensions (WxHxD)

ZYUW

YWUW

YWUW

X\UW

Horizontal

Vertical

YYWUW

YYWUW

www.aceteq.co.kr

89

REPEATER ANTENNAS

AWMS-07-70
ELECTRICAL SPECIFICATIONS
Frequency range

2500 ~ 2700 MHz

Gain

>7 dBi

Polarization
-3 dB Beam width

Vertical
Horizontal

>55

Vertical

>50

Front to back ratio

>13 dB

Impedance

50

VSWR

<1.5

Maximum input power

10 W

MECHANICAL SPECIFICATION
86.4 110.3 34.5 mm

Weight

0.3 kg (without clamp)

Connector type

SMA Female (Pig Tail)

Radome material

ASA

Mounting interface

Wall Type

ETC
(LP / Patch / INDOOR)

Dimensions (WxHxD)

_]U[

Z[U\

_XU_XW^U]

XXWUZ

W
\WU

W
[\U

90

Vertical

[\U
W

Horizontal

www.aceteq.co.kr

REPEATER ANTENNAS

AWMO-6-0T
ELECTRICAL SPECIFICATIONS

Coming
Soon

Frequency range

2500 ~ 2700 MHz

Gain

>5.5 dBi

Polarization
-3 dB Beam width

Vertical
Horizontal

360

Vertical

24 3

Electrical tilt

Front to back ratio


Impedance

50

VSWR

<1.5

IMD (@2x37 dBm)

>140 dBc

Maximum input power

50 W

MECHANICAL SPECIFICATION
20 x 320 mm

Weight

0.15 kg (without clamp)

Connector type

N Female x 1

Radome material

F.R.P

Mounting interface

Wall type

ETC
(LP / Patch / INDOOR)

Dimensions (xH)

www.aceteq.co.kr

ZWWUW

ZYWUW

YWUW

Vertical

91

SPECIAL ANTENNAS

GA-1575
ELECTRICAL SPECIFICATIONS
Frequency range

1575.42 MHz 5 MHz

Gain

>38 dBic

Polarization

RHCP

DC Power

5.0 0.5 V

Current

45 mA (Max)

Noise Figure (LNA Part)

<1.5 dB

Impedance

50 (Nominal)

VSWR

<2.0

MECHANICAL SPECIFICATION
Housing - RF Connector

TNC Female x 1 or N Female x 1

Housing - Diameter

90.6 0.1 mm

Housing - Main Element Height

31.5 0.1 mm
Hexagon (Inner diameter : 25.2 0.1 mm)

Support

4 Hole (Inner diameter :12 0.1 mm)

Operating Temperature

-40C ~ +80C

ETC
(LP / Patch / INDOOR)

Support Pipe

_ZU\

ZXU\

`WU]

Horizontal

92

Vertical

www.aceteq.co.kr

BASE STATION ANTENNAS

AGP-2450
ELECTRICAL SPECIFICATIONS
Frequency range

2400 ~ 2500 MHz

Gain

>24.0 dBi

Polarization
-3 dB Beam width

Vertical or Horizontal
Horizontal

6.5 1

Vertical

9.5 1

Front to back ratio

>25 dB

Impedance

50

VSWR

<1.5

Maximum input power

100 W

MECHANICAL SPECIFICATION
1100 10 mm

Weight

10 kg (without clamp)

Connector type

N Female x 1

Maximum wind speed

60 m/s

Radome material

N/A

Mounting interface

Pole mounting (40 ~ 90 mm)

Mechanical downtilt

-20 ~ 20

_^WUW

XXWWUW

YWUW

^_UW

Y_WUW

[Z`UW

ETC
(LP / Patch / INDOOR)

Dimensions ()

[WUW`WUW

Horizontal

Vertical

TYW
TX\
TXW
T\
W
R\
RXW
RX\
RYW

YWUW

uGjvuuU
OmP

www.aceteq.co.kr

93

ACCESSARIES

ETC

RETU-AISG20
ACS1100
BIAS-T
Smart BIAS-T

95_
96_
97_
98_

page

page

page

page

ETC

RETU-AISG20
SPECIFICATIONS
Input voltage range

10 30 V (pin 6)

Power consumption

<1.5 W (stand by); <8.0 W (motor activated)

Connectors

2 x 8 pin connector according to IEC 60130-9; according to AISG


Daisy chain in: male; Daisy chain out: female

Hardware interfaces

RS 485A/B (pin 5, pin 3);


power supply (pin 6); DC return (pin 7);
according to AISG

Logical interface

HEX coded commands


based on HDLC protocol, according to 3GPP/AISG 2.0

AISG data rate

9.6 kbps

Adjustment time (full range)

60 sec (typically, depending on antenna type)

Adjustment cycles

>20,000

Temperature range

-40C ~ + 70C

Protection class

IP55

Dimensions (WxHxD)

59 x 250 mm

Weight

<700 g (without daisy chain termination)

Housing material

Aluminum; varnished housing (Gray)

ACCESSARIES

* With adjustable antennas


* To easy chaining

www.aceteq.co.kr

95

ETC

ACS1100
SYSTEM COMMUNICATION STANDARD
Network Interface
Protocol to ALD

RS-232

System console 8 Data bits, 1 Stop, Parity None, 115200bps

ETHERNET

HTTP/HTML, ICMP/PING, DHCP

Coaxial cable HDLC protocol according to AISG. OOK Carrier at 2.176 MHz

ELECTRICAL SPECIFICATIONS
Power supply from BTS

AC100~240V 1.6A / DC -48V 1.7A


(It depends on ACS model or User Requirements.)

Power supply to ALD

DC 15V max. 3.3A / DC 28V max. 1.76A


(Selectable DC output is optional.)

ALD Interface

OOK modulated carrier (2.176 MHz)

Total Output Power

Max. 50 W

CONNECTOR STANDARD
Connector of AC

C14 inlet: IEC 60320

Connector of ALD Interface

3 Port SMB (Female) IEC 169-10

Connector of System Console Interface

DB-9 Pin DSUB (Male)

Connector of BTS Interface

RJ45 (Ethernet UTP)

ENVIROMENTAL & MECHANICAL SPECIFICATION


-25C ~ +55C Ambient temperature

Safety

UL1950

Dimensions:(WxDxH)

19" 1U (483 x 250 x 43.6 mm)

ACCESSARIES

Temperature Range

96

www.aceteq.co.kr

ETC

BIAS-T
ELECTRICAL SPECIFICATIONS OF SMART BIAS-T
Operating Freq.
698 MHz~2,690 MHz
698 MHz~2,690 MHz

Isolation

698 ~ 2,690 MHz


Insertion loss

0.2 dB Max.

Return loss

20.0 dB Min.

ANT to DC/RET port


BTS to DC/RET port

60.0 dB Min.

PIM (2tone CW, +43 dBm)

-117 dBm Max.

Operating power

Average 500 W / Peak 5,000 W

DC POWER SPECIFICATIONS
DC power supply

Voltage range

+10 V ~ +30 V

Maximum current

2.0 A

DC voltage reduction protection

1.0 V Max.

Power consumption protection

0.6 W Max.

ENVIRONMENTAL SPECIFICATION
Lightning protection

at ANT. Port , BTS Port

5 kA@10/350 pulse

Reliability and Environmental Requirements

Operation Temperature

-40C to +65C

Enclosure ingress protection

IP 66 (with mated connector)

MECHANICAL SPECIFICATION

Weight

<0.5 kg

Material

Aluminum

Interface

www.aceteq.co.kr

95.7 x 55.1 x 38.2 mm

BTS

7/16 male

ANT

7/16 female

DC/OOK

TNC female

Protection GND

M8 screw

ACCESSARIES

Dimensions (WxHxD)

97

ETC

Smart BIAS-T
ELECTRICAL SPECIFICATIONS OF SMART BIAS-T
Operating Freq.
698 MHz~2,690 MHz
698 MHz~2,690 MHz

698 ~ 2,690 MHz

Insertion loss

0.2 dB Max.

Return loss

20.0 dB Min.

ANT to DC/RET port


BTS to DC/RET port

Isolation

Carrier power

2.176 MHz 100 KHz


(AISG signal)

60.0 dB Min.
3 dBm2 dB

Return loss

10 dB Min.

PIM(2tone CW, +43dBm)

-117 dBm Max.

Operating power

Average 500 W / Peak 5,000 W

DC POWER SPECIFICATIONS
DC power supply

Voltage range

+10 V ~ +30 V

Maximum current

2.0 A

DC voltage reduction protection

1.0 V Max.

Power consumption protection

0.6 W Max.

ENVIRONMENTAL SPECIFICATION
Lightning protection
Reliability and Environmental
Requirements

at ANT. Port, BTS Port

5 kA@10/350 pulse

at DC/RET port

3 kA@10/350 pulse (all pins are shorted)

Operation Temperature

-40C to +65C

Enclosure ingress protection

IP 66 (with mated connector)

MECHANICAL SPECIFICATION
Dimensions (WxHxD)

145.6 x 75.6 x 50.0 mm

Weight

< 0.85 kg

ACCESSARIES

Material
Interface

98

Aluminum
BTS

7/16 female

ANT

7/16 male

RET

RET 8pin female

Protection GND

M8 screw

www.aceteq.co.kr

Installation Guide for Base Station Antenna


Antenna

25Nm
ANT A

7~16
connechors

ANT B

RETU

Jumers
ANT A

ANT B

MA
20Nm

TMA

TMA
RSS B

RSS A

Jumers

Feeders

Jumers

TXIRXA TXRXB
RSS

Attaching Base Station Antenna on Poles Using Brackets


1

3/8 Plain washer


3/8 Spring washer
3/8 Hex. bolt

40~90mm (Mast pipe)

Attaching Antenna with Down-Tilt


kits using 3/8 Bolts and Washers
Set the tilt angle for 0 on the DownTilt kits by manually.

Guide clamp

Loosen both Hex Nuts


for antenna installation
with mast pipe.

To set the mechanical


tilt angle after xed with
antenna and mast pipe.

YW
X\
XW
\
W
YW
X\
XW
\
W

Take out the Guide clamp into the box and fold it.

www.aceteq.co.kr

Tilt clamp

99

Adjusting Electrical Tilt Angle


1

4
10
9
8
7
6
5
4
3
2
1
0
-1

10
9
8
7
6
5
4
3
2
1
0
-1

1. turn and dismount the protection cap.


2. Push up the knob for unlock.
3. Turn the knob for adjusting and pull down the knob for
lock.
4. Turn and mount the protection cap.

10
9
8
7
6
5
4
3
2
1
0

Desired value
Start value

Always move the indicator from


a higher value to the desired value.

41mm

17.7 - 19.7 Nm

Connecting from
ASC/RIU/RRU/AISG TMA

100

Sealing Connectors

www.aceteq.co.kr

Connecting AISG RETUs in Daisy-Chain

From ASC/RIU/RRU/AISGz TMA*


*Software support of daisy-chain in RBS required

Mounting the TMA on Flat Surface


Use the footprint of the TMA to mark
the positions of the pillot holes for screws.

Drill the pillot holles and drive in the screws


leaving spaces between the screw heads and wall.

Hook the TMA on the screws and tighten them.

Space

Mounting the TMA on a Pole Using Pole Clamps

www.aceteq.co.kr

101

TMA

ACES TMAs without AISG

Type

Model name

P/N

Frequency Range (MHz)

Gain (dB)

Page

SINGLE TYPE

850 w/o AISG Single TMA

TG08A0R0

UL : 824 ~ 849 / DL : 869 ~ 894

12 1.0

104

900(PGSM) w/o AISG Single TMA

TG09A0R0

UL : 890 ~ 915 / DL : 935~960

12 1.0

105

900(EGSM) w/o AISG Single TMA

TG09A1R0

UL : 880 ~ 915 / DL : 925 ~ 960

12 1.0

106

1800 w/o AISG Double TMA

TG18D0R0

UL : 1710 ~ 1785 / DL : 1805 ~ 1880

12 1.0

107

1900 w/o AISG Double TMA

TG19D0R0

UL : 1850 ~ 1910 / DL : 1930 ~ 1990

12 1.0

108

2100 w/o AISG Double TMA

TG21D1R0

UL : 1920 ~ 1980 / DL : 2110 ~ 2170

12 1.0

109

DOUBLE TYPE

ACES DTMAs with AISG

Type

Model name

P/N

Frequency Range (MHz)

Gain (dB)

Page

AISG 1.1

800 AISG 1.1 Double TMA

TG08C0R0

UL : 824 ~ 849 / DL : 869 ~ 894

12 1.0

111

900(PGSM) AISG 1.1 Double TMA

TG09C0R0

UL : 890 ~ 915 / DL : 935 ~ 960

12 1.0

112

900(EGSM) AISG 1.1 Double TMA

TG09C1R0

UL : 880 ~ 915 / DL : 925 ~ 960

12 1.0

113

1800 AISG 1.1 Double TMA

TG18C0R0

UL : 1710 ~ 1785 / DL : 1805 ~ 1880

12 1.0

114

1900 AISG 1.1 Double TMA

TG19C0R0

UL : 1850 ~ 1910 / DL : 1930 ~ 1990

12 1.0

115

2100 AISG 1.1 Double TMA

TG21D0R0

UL : 1920 ~ 1980 / DL : 2110 ~ 2170

12 1.0

116

700(LTE) AISG 2.0 Double TMA

TG07C0R0

UL : 776 ~ 787 / DL : 746 ~ 757

12 1.0

117

800 AISG 2.0 Double TMA

TG08C0R1

UL : 824 ~ 849 / DL : 869 ~ 894

12 1.0

118

900(PGSM) AISG 2.0 Double TMA

TG09C0R1

UL : 890 ~ 915 / DL : 935 ~ 960

12 1.0

119

900(EGSM) AISG 2.0 Double TMA

TG09C2R0

UL : 880 ~ 915 / DL : 925 ~ 960

12 1.0

120

1800 AISG 2.0 Double TMA

TG18C0R1

UL : 1710 ~ 1785 / DL : 1805 ~ 1880

12 1.0

121

1900 AISG 2.0 Double TMA

TG19C0R1

UL : 1850 ~ 1910 / DL : 1930 ~ 1990

12 1.0

122

2100 AISG 2.0 Double TMA

TG21D2R0

UL : 1920 ~ 1980 /DL : 2110 ~ 2170

12 1.0

123

1700/2100 AISG 2.0 Double TMA

TG21D3R0

UL : 1710 ~ 1755 / DL : 2110 ~ 2155

12 1.0

124

2600(LTE) AISG 2.0 Double TMA

TG26C0R0

UL : 2500 ~ 2570 / DL : 2620 ~ 2690

12 1.0

125

2600(LTE) AISG 2.0 Double TMA

TG26C1R0

UL : 2500 ~ 2570 / DL : 2620 ~ 2690

24 1.0

126

AISG 2.0

ACE'S Client-specied TMAs

Type

Model name

P/N

Frequency Range (MHz)

Gain (dB)

Page

AISG 2.0 DTMA

800 AISG 2.0 Double TMA

TR08C0R0

UL : 791 ~ 821 / DL : 832 ~ 862

24 1.0

128

800 AISG 2.0 Double TMA

TR08C1R0

UL : 824 ~ 849 / DL : 869 ~ 894

32 1.0

129

900 AISG 2.0 Double TMA

TR09C1R0

UL : 880 ~ 915 / DL : 925 ~ 960

32 1.0

130

1800 AISG 2.0 Double TMA

TR18C0R1

UL : 1710 ~ 1785 / DL : 1805 ~ 1880

High : 33 1.0
Low : 12 1.0

131

1900 AISG 2.0 Double TMA

TR19D0R1

UL : 1850 ~ 1910 / DL : 1930 ~ 1990

High : 33 1.0
Low : 12 1.0

132

2100 AISG 2.0 Double TMA

TR21C0R1

UL : 1920 ~ 1980 / DL : 2110 ~ 2170

12 1.0

133

CWA

2600 AISG 2.0 Double TMA

TR26C0R0

UL : 2500 ~ 2570 / DL : 2620 ~ 2690

13 1.0

134

1800 CWA Double TMA

TR18C3R0

UL : 1710 ~ 1785 / DL : 1805 ~ 1880

33 1.0

135

2100 CWA Double TMA

TR21C0R2

UL : 1920 ~ 1980 / DL: 2110 ~ 2170

32 1.0

136

TMA Products list

ACES TMAs without AISG


SINGLE TYPE
850 w/o AISG Single TMA
104_
900(PGSM) w/o AISG Single TMA
105_
900(EGSM) w/o AISG Single TMA
106_
page

page

page

DOUBLE TYPE
1800 w/o AISG Double TMA
107_
1900 w/o AISG Double TMA
108_
2100 w/o AISG Double TMA
109_
page

page

ACES TMAs
without AISG

page

TG08C0R0

850 w/o AISG Single TMA

Outline

Block Diagram

ACES TMAs
without AISG

UP LINK
Pass band Frequency range
Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

DC POWER (TMA DC supply feed via BTS)


824 ~ 849 MHz
25 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.0 dB
12 dBm
24 dBm
18 dB
12 dB
2.8 dB
70 dB
90 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

DOWN LINK
Pass band Frequency range
Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

104

869 ~ 894 MHz


25 MHz
45 dB
60 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

Supply Voltage
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)

9.5 ~ 30 V
12 V
120 mA
500 mA

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF
By-Pass switching time

EN55022/55024, FCC
CB, ETL
>700,000 hours
10 msec

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

126.0 x 243.0 x 105.6 mm


<4.7 Kg
Aluminum
7/16 female

www.aceteq.co.kr

TG09A0R0

900(PGSM) w/o AISG Single TMA

Outline

Block Diagram

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temp.
Noise Figure @normal temp.
Noise Figure @extreme temp.
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)

DC POWER (TMA DC supply feed via BTS)


890 ~ 915 MHz
25 MHz
12 dB 1.0 dB
1.0 dB
1.9 dB
2.3 dB
11 dBm
24 dBm
16 dB
12 dB
2.5 dB
70 dB
90 nsec / 5 MHz

DOWN LINK
Pass band Frequency range
Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating Power
RF signal Peak Power
Passive Inter-modulation @ ANT port

www.aceteq.co.kr

935 ~ 960 MHz


25 MHz
45 dB
60 nsec / 5 MHz
0.7 dB
18 dB
0.5 dB
51 dBm
62 dBm
-115 dBc (43 dBm 2 tone)

Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)

12 V
120 mA
500 mA

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF
By-Pass switching time

EN55022/55024, FCC
CB, ETL
>700,000 hours
10 msec

ACES TMAs
without AISG

UP LINK

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

126.0 x 243.0 x 105.6 mm


<4.7 Kg
Aluminum
7/16 female

105

TG09A1R0

900(EGSM) w/o AISG Single TMA

Outline

Block Diagram

UP LINK

ACES TMAs
without AISG

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temp.
Noise Figure @normal temp.
Noise Figure @extreme temp.
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)

DC POWER (TMA DC supply feed via BTS)


880 ~ 915 MHz
35 MHz
12 dB 1.0 dB
1.0 dB
1.9 dB
2.3 dB
11 dBm
24 dBm
16 dB
12 dB
2.5 dB
70 dB
90 nsec / 5 MHz

DOWN LINK
Pass band Frequency range
Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating Power
RF signal Peak Power
Passive Inter-modulation @ ANT port

925 ~ 960 MHz


35M Hz
45 dB
60 nsec / 5 MHz
0.7 dB
18 dB
0.5 dB
51 dBm
62 dBm
-115 dBc (43 dBm 2 tone)

Supply Voltage
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF
By-Pass switching time

EN55022/55024, FCC
CB, ETL
>700,000 hours
10 msec

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

106

9.5 ~ 30 V
12 V
120 mA
500 mA

135.2 x 350.0 x 112.1 mm


<6.5 Kg
Aluminum
7/16 female

www.aceteq.co.kr

TG18D0R0

1800 w/o AISG Double TMA


ANT0

ANT1

RX 1

RX 1

TX

RX 2

RX 2

Ligntning
Protection
&
Bias-T

BTS 0

Ligntning
Protection
&
Bias-T

DC 9.5~30V

Outline

DC 9.5~30V

BTS 1

Block Diagram

UP LINK
Pass band Frequency range
Bandwidth
Gain over temperature
Gain variation over temp.
Noise Figure @normal temp.
Noise Figure @extreme temp.
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection(Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)

TX

LNA2

LNA1

DC POWER (TMA DC supply feed via BTS)


1710 ~ 1785 MHz
75 MHz
12 dB 1.0 dB
1.0 dB
1.8 dB
2.3 dB
11 dBm
24 dBm
18 dB
15 dB
3.0 dB
70 dB
90 nsec / 5 MHz

Supply Voltage
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

9.5~30 V
12 V
100 mA
330 mA
BTS0 and BTS1

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating Power
RF signal Peak Power
Passive Inter-modulation @ ANT port

1805 ~ 1880 MHz


75 MHz
45 dB
60 nsec / 5 MHz
0.6 dB
18 dB
0.5 dB
51 dBm
62 dBm
-115 dBc (43 dBm 2 tone)

EMC
Safety
MTBF
By-Pass switching time

EN55022/55024, FCC
CB, ETL
>700,000 hours
10 msec

ACES TMAs
without AISG

DOWN LINK

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

www.aceteq.co.kr

159 x 280 x 109 mm


<7 Kg
Aluminum
7/16 female

107

TG19D0R0

1900 w/o AISG Double TMA


ANT0

ANT1

RX 1

RX 1

TX

RX 2

RX 2

Ligntning
Protection
&
Bias-T

Ligntning
Protection
&
Bias-T

BTS 0 DC 9.5~30V

Outline

108

ACES TMAs
without AISG

BTS 1

DC POWER
1850 ~ 1910 MHz
60 MHz
121.0 dB
1.0 dB
1.8 dB
2.3 dB
11 dBm
24 dBm
18 dB
15 dB
3.0 dB
40 dB
70 dB
90 nsec / 5 MHz
-104 dBm (43 dBm 2 tone)
10 dBm

DOWN LINK
Pass band Frequency range
Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

DC 9.5~30V

Block Diagram

UP LINK
Pass band Frequency range
Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1dB Compression
Output IP3 @ 0 dBm(output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Attenuation : DC~1815 MHz
Rx-Tx rejection
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

TX

LNA2

LNA1

1930 ~ 1990 MHz


60 MHz
45 dB
60 nsec / 5 MHz
0.6 dB
18 dB
0.5 dB
51 dBm
62 dBm
-115 dBm (43 dBm 2 tone)

Supply Voltage
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

9.5 ~ 30 V
12 V
100 mA
330 mA
BTS0 and BTS1

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF
By-Pass switching time

EN55022/55024, FCC
CB, ETL
>700,000 hours
10 msec

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

159 x 280 x 109 mm


<7 Kg
Aluminum
7/16 female

www.aceteq.co.kr

TG21D1R0

2100 w/o AISG Double TMA


ANT 0

ANT 1

RX 1

RX 1

TX

RX 2

RX 2

Ligntning
Protection
&
Bias-T

Ligntning
Protection
&
Bias-T

NodeB 0 DC 7~15V

Outline

www.aceteq.co.kr

NodeB 1

DC POWER

2110 ~ 2170 MHz


60 MHz
45 dB
10 nsec / 5 MHz
0.5 dB
18 dB
0.4 dB
51 dBm
62 dBm
-116 dBc (43 dBm 2 tone)

Supply Voltage
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

7 ~ 15 V
12 V
90 mA
500 mA
NodeB 0 and NodeB 1

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF
By-Pass switching time

EN55022/55024, FCC
CB, ETL
>700,000 hours
200 nsec

ACES TMAs
without AISG

1920 ~ 1980 MHz


60 MHz
121.0 dB
1.0 dB
1.7 dB
1.9 dB
11 dBm
24 dBm
16 dB
12 dB
2.7 dB
70 dB
20 nsec / 5 MHz
<-116 dBm (43 dBm 2t one)
10 dBm

DOWN LINK
Pass band Frequency range
Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating Power
RF signal Peak Power
Passive Inter-modulation @ ANT port

DC 7~15V

Block Diagram

UP LINK
Pass band Frequency range
Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1dB Compression
Output IP3 @ 0dBm(output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection(Rx1 Path)
Group Delay Distortion (ns)=(Over any 5MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

TX

LNA2

LNA1

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

174 x 187 x 82 mm
<4.5 Kg
Aluminum
7/16 female

109

TMA Products list

ACES DTMAs with AISG


AISG 1.1
800 ACEs TMAs (AISG 1.1) Double TMA
900(PGSM) ACEs TMAs (AISG 1.1) Double TMA
900(EGSM) ACEs TMAs (AISG 1.1) Double TMA
1800 ACEs TMAs (AISG 1.1) Double TMA
1900 ACEs TMAs (AISG 1.1) Double TMA
2100 ACEs TMAs (AISG 1.1) Double TMA

ACES DTMAs
with AISG

AISG 2.0
700(LTE) ACE's TMAs (AISG 2.0) Double TMA
800 ACE's TMAs (AISG 2.0) Double TMA
900(PGSM) ACE's TMAs (AISG 2.0) Double TMA
900(EGSM) ACE's TMAs (AISG 2.0) Double TMA
1800 ACE's TMAs (AISG 2.0) Double TMA
1900 ACE's TMAs (AISG 2.0) Double TMA
2100 ACE's TMAs (AISG 2.0) Double TMA
1700/2100 ACE's TMAs (AISG 2.0) Double TMA
2600(LTE) ACE's TMAs (AISG 2.0) Double TMA
2600(LTE) ACE's TMAs (AISG 2.0) Double TMA

111_
112_
113_
114_

page

page

page

page

115_
116_

page

page

117_
118_
119_
120_
121_
122_
123_
124_
125_
126_

page

page

page

page

page

page

page

page

page

page

TG08C0R0

800 AISG 1.1 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power

Modem

j
s

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

BTS1

AISG INTERFACE

869 ~ 894 MHz


25 MHz
45dB
60 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


9.5 ~ 30 V
230 mA ~ 290 mA
12 V
170 mA
<500 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

3dBm2dB
<-40dBm
2A ~ 2.3A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 NOT USED
7 DC ground
8 NOT USED

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024, FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

ACES DTMAs
with AISG

824 ~ 849 MHz


25 MHz
121.0 dB
1.0 dB
1.8 dB
2.0 dB
12 dBm
24 dBm
18 dB
12 dB
2.8 dB
70 dB
90 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

RS 485

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1dB Compression
Output IP3 @ 0 dBm(output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

255 x 250 x 106 mm


<9.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

9.5 ~ 30 V
9W
BTS 0 or BTS1 &BTS 0 and
BTS1

111

TG09C0R0

900(PGSM) AISG 1.1 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power

Modem

j
s

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

890 ~ 915 MHz


25 MHz
121.0 dB
1.0 dB
1.8 dB
2.0 dB
12 dBm
24 dBm
18 dB
12 dB
2.8 dB
70 dB
90 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

935 ~ 960 MHz


25 MHz
45 dB
60 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


ACES DTMAs
with AISG

RS 485
BTS1

AISG INTERFACE

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1dB Compression
Output IP3 @ 0 dBm(output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

9.5 ~ 30 V
230 mA ~ 290 mA
12 V
170 mA
<500 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 NOT USED
7 DC ground
8 NOT USED

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024, FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

255 x 250 x 106 mm


<9.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

112

9.5 ~ 30 V
9W
BTS 0 or BTS1 &BTS 0 and
BTS1
www.aceteq.co.kr

TG09C1R0

900(EGSM) AISG 1.1 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

RS 485
BTS1

AISG INTERFACE

925 ~ 960 MHz


35 MHz
45 dB
60 nsec / 5 MHz
0.7 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


9.5 ~ 30 V
230 mA ~ 290 mA
12 V
170 mA
<500 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 NOT USED
7 DC ground
8 NOT USED

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024, FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

ACES DTMAs
with AISG

880 ~ 915 MHz


35 MHz
121.0 dB
1.0 dB
1.8 dB
2.0 dB
12 dBm
24 dBm
18 dB
12 dB
2.8 dB
70 dB
90 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1dB Compression
Output IP3 @ 0 dBm(output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

255 x 250 x 106 mm


<9.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

9.5 ~ 30 V
9W
BTS 0 or BTS1 &BTS 0 and
BTS1

113

TG18C0R0

1800 AISG 1.1 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

1710 ~ 1785 MHz


75 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.2 dB
12 dBm
24 dBm
18 dB
15 dB
2.8 dB
40 dB
70 dB
50 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

1805 ~ 1880 MHz


75 MHz
45dB
45 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

MISCELLANEOUS

POWER CONSUMPTION IN CURRENT ALARM MODE


ACES DTMAs
with AISG

BTS1

AISG INTERFACE

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

RS 485

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

z
w

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Attenuation : DC~1675 MHz
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

9.5 ~ 30 V
230 mA ~ 290 mA
12 V
130 mA
<330 mA
BTS 0 and BTS 1

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 NOT USED
7 DC ground
8 NOT USED

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

EMC
Safety
MTBF

EN55022/55024, FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

159 x 280 x 109 mm


<7 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

114

9.5 ~ 30 V
6.5 W
BTS 0 or BTS1 &BTS 0 and
BTS1
www.aceteq.co.kr

TG19C0R0

1900 AISG 1.1 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

BTS1

AISG INTERFACE
1850 ~ 1910 MHz
60 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.2 dB
12 dBm
24 dBm
18 dB
15 dB
2.8 dB
40 dB
70 dB
50 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

1930 ~ 1990 MHz


60 MHz
45 dB
45 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

MISCELLANEOUS

POWER CONSUMPTION IN CURRENT ALARM MODE


9.5 ~ 30 V
230 mA ~ 290 mA
12 V
130 mA
<330 mA
BTS 0 and BTS 1

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 NOT USED
7 DC ground
8 NOT USED

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

EMC
Safety
MTBF

EN55022/55024, FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

159 x 280 x 109 mm


<7 Kg
Aluminum
7/16 female

ACES DTMAs
with AISG

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

RS 485

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

z
w

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Attenuation : DC ~ 1815 MHz
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

9.5 ~ 30 V
6.5 W
BTS 0 or BTS1 &BTS 0 and
BTS1

115

TG21D0R0

2100 AISG 1.1 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm

Regulator

Regulator

CPU

Power

Power
Communication
Logic

Modem

SPDT

Inrush
current

Inrush
current

Current
Limiter &
Switch &
Thermal
Sensor
ASK Signal

ASK Signal
Lightning
Protection
Circuit

Surge
Protection

DC OUT
BTS0

1920 ~ 1980 MHz


60 MHz
121.0 dB
1.0 dB
1.7 dB
1.9 dB
11 dBm
24 dBm
16 dB
12 dB
2.7 dB
70 dB
20 nsec / 5 MHz
<-116 dBm (43 dBm 2 tone)
10 dBm

2110 ~ 2170 MHz


60 MHz
45 dB
10 nsec / 5 MHz
0.5 dB
18 dB
0.4 dB
51 dBm
62 dBm
-116 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE

ACES DTMAs
with AISG

BTS1

AISG INTERFACE

DOWN LINK

Operational voltage range


Operational current range
Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

RS 485

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

Surge
Protection

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

7 ~ 15 V
50 mA ~ 190 mA
230 mA ~ 290 mA
12 V
140 mA
<285 mA
NodeB 0 and NodeB 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 NOT USED
7 DC ground
8 NOT USED

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF
By-Pass switching time

EN55022/55024 ,FCC
CB, ETL
>700,000 hours
200 nsec

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

174 x 187 x 82 mm
<4.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

116

10 ~ 30 V
4.5 W
NodeB 0 or NodeB1 &NodeB
0 and NodeB1
www.aceteq.co.kr

TG07C0R0

700(LTE) AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

Coming
Soon

LNA

LNA Alarm

LNA Alarm

CPU

j
s

Modem

SPDT

OOK Signal

OOK Signal

s
w
j

z
w

DC OUT
BTS0

RS 485
BTS1

AISG INTERFACE

746 ~ 757 MHz


11 MHz
40 dB
20 nsec / 5 MHz
0.5 dB
18 dB
0.3 dB
50 dBm
58.6 dBm / 0.545 atm / 800 C
-160 dBc (43dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


9 ~ 13 V
230 mA ~ 290 mA
12 V
190 mA
<300 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET connector pin denition

3 dBm 2 dB
<-40 dBm
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>500,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

ACES DTMAs
with AISG

776 ~ 787 MHz


11 MHz
12 1.0 dB
1.0 dB
1.7 dB
1.9 dB
10 dBm
25 dBm
18 dB
12 dB
2.8 dB
65 dB
20 nsec / 5 MHz

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
5th Passive Inter-modulation @ ANT port @
776 ~ 787 MHz

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain Ripple
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)

225 x 194 x 95 mm
<6.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

10 ~ 30 V
5.5 W
BTS 0 or BTS1 &BTS 0 and
BTS1

117

TG08C0R1

800 AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

824 ~ 849 MHz


25 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.0 dB
12 dBm
24 dBm
18 dB
12 dB
2.8 dB
70 dB
90 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

869 ~ 894 MHz


25 MHz
45 dB
60 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


ACES DTMAs
with AISG

RS 485
BTS1

AISG INTERFACE

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

9.5 ~ 30 V
230 mA ~ 290 mA
12 V
50 mA~170 mA
<500 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
2.0 Ver

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

255 x 250 x 106 mm


<9.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

118

9.5 ~ 30 V
9W
BTS 0 or BTS1 &BTS 0 and
BTS1
www.aceteq.co.kr

TG09C0R1

900(PGSM) AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

RS 485
BTS1

AISG INTERFACE

935 ~ 960 MHz


25 MHz
45 dB
60 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


9.5 ~ 30 V
230 mA ~ 290 mA
12 V
50 mA ~170 mA
<500 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
2.0 Ver

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed
ACES DTMAs
with AISG

890 ~ 915 MHz


25 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.0 dB
12 dBm
24 dBm
18 dB
12 dB
2.8 dB
70 dB
90 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10dBm

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

255 x 250 x 106 mm


<9.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

9.5 ~ 30 V
9W
BTS 0 or BTS1 &BTS 0 and
BTS1

119

TG09C2R0

900(EGSM) AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

880 ~ 915 MHz


35 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.0 dB
12 dBm
24 dBm
18 dB
12 dB
2.8 dB
70 dB
90 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

925 ~ 960 MHz


35 MHz
45 dB
60 nsec / 5 MHz
0.7 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.54 5atm / 650 C
-115 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


ACES DTMAs
with AISG

RS 485
BTS1

AISG INTERFACE

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm(output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

9.5 ~ 30 V
230 mA ~ 290 mA
12 V
50 mA~170 mA
<500 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
2.0 Ver

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

255 x 250 x 106 mm


<9.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

120

9.5 ~ 30 V
9W
BTS 0 or BTS1 &BTS 0 and
BTS1
www.aceteq.co.kr

TG18C0R1

1800 AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

BTS1

AISG INTERFACE

1805 ~ 1880 MHz


75 MHz
45 dB
45 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


9.5 ~ 30 V
230 mA ~ 290 mA
12 V
50 mA ~ 130 mA
<330 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
2.0 Ver

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

ACES DTMAs
with AISG

1710 ~ 1785 MHz


75 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.2 dB
12 dBm
24 dBm
18 dB
15 dB
2.8 dB
40 dB
70 dB
50 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

RS 485

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

z
w

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Attenuation : DC ~ 1675 MHz
Rx-Tx rejection(Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

159 x 280 x 109 mm


<7 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

9.5 ~ 30 V
6.5 W
BTS 0 or BTS1 &BTS 0 and
BTS1

121

TG19C0R1

1900 AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm
y

CPU

Power

Power
j
s

Modem

SPDT
p

jG
sG MG
zG M
{G
z
ASK Signal

ASK Signal
s
w
j

z
w

DC OUT
BTS0

1850 ~ 1910 MHz


60 MHz
12 1.0 dB
1.0 dB
1.8 dB
2.2 dB
12 dBm
24 dBm
18 dB
15 dB
2.8 dB
40 dB
70 dB
50 nsec / 5 MHz
<-104 dBm (43 dBm 2 tone)
10 dBm

1930 ~ 1990 MHz


60 MHz
45 dB
45 nsec / 5 MHz
0.6 dB
18 dB
0.4 dB
51 dBm
60.6 dBm / 0.545 atm / 650 C
-115 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


ACES DTMAs
with AISG

BTS1

AISG INTERFACE

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

RS 485

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

z
w

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Attenuation : DC ~ 1815 MHz
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

9.5 ~ 30 V
230 mA ~ 290 mA
12 V
50 mA ~ 130 mA
<330 mA
BTS 0 and BTS 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
2.0 Ver

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

159 x 280 x 109 mm


<7 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

122

9.5 ~ 30 V
6.5 W
BTS 0 or BTS1 &BTS 0 and
BTS1
www.aceteq.co.kr

TG21D2R0

2100 AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm

CPU

Power

Power
j
s

Modem

SPDT

p

j G
s GMG
z GM
{ G
z
ASK Signal

ASK Signal

s
w
j

z
w

DC OUT
BTS0

RS 485
BTS1

AISG INTERFACE

2110 ~ 2170 MHz


60 MHz
45 dB
10 nsec / 5 MHz
0.5 dB
18 dB
0.4 dB
51 dBm
62 dBm
-116 dBm (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


7 ~ 15 V
50 mA ~ 190 mA
230 mA ~ 290 mA
12 V
50 mA ~ 140 mA
<285 mA
NodeB 0 and NodeB 1

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
2 A ~ 2.3 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
2.0 Ver

ENVIRONMENTAL SPECIFICATION
Operating Temperature Range
Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF
By-Pass switching time

EN55022/55024,FCC
CB, ETL
>700,000 hours
200 nsec

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed
ACES DTMAs
with AISG

1920 ~ 1980 MHz


60 MHz
12 1.0 dB
1.0 dB
1.7 dB
1.9 dB
11 dBm
24 dBm
16 dB
12 dB
2.7 dB
70 dB
20 nsec / 5 MHz
<-116 dBm (43 dBm 2 tone)
10 dBm

DOWN LINK

Operational voltage range


Operational current range
Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

z
w

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
Passive Inter-modulation @ ANT port

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain variation over temperature
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)
Passive Inter-modulation @ BTS port
Max pass band input power

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

174 x 187 x 82 mm
<4.5 Kg
Aluminum
7/16 female

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

10 ~ 30 V
4.5 W
NodeB 0 or NodeB1 &NodeB
0 and NodeB1

123

TG21D3R0

1700/2100 AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

Coming
Soon

ON/OFF control

ON/OFF control

LNA

LNA Alarm

Regulator

Regulator

CPU

Power

Power
Communication
Logic

Modem

SPDT

Inrush
current

Inrush
current

Current
Limiter &
Switch &
Thermal
Sensor
ASK Signal

ASK Signal
Lightning
Protection
Circuit

Surge
Protection

DC OUT
BTS0

ACES DTMAs
with AISG

BTS1

Operational voltage range


Maximum operational power
DC injected port name

10 ~ 30 V
5W
BTS 0 or BTS1 &BTS 0 and
BTS1

AISG INTERFACE
Modem carrier power
Spurious Emission on the unused BTS port
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
Ver 2.0

ENVIRONMENTAL SPECIFICATION
2110 ~ 2155 MHz
45 MHz
50 dB
20 nsec / 5 MHz
0.3 dB
18 dB
50 dBm
58.6 dBm / 0.545 atm / 650 C
-165 dBc (43 dBm 2 tone)
-90 dBc (43 dBm 2 tone)

Operating Temperature Range


Humidity
Storage Temperature Range
Enclosure Protection

EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>700,000 hours

LIGHTNING PROTECTION
Test port

9 ~ 13 V
230 mA ~ 290 mA
12 V
190 mA
<300 mA
BTS 0 and BTS 1

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS

POWER CONSUMPTION IN CURRENT ALARM MODE

124

RS 485

POWER CONSUMPTION IN AISG ALARM MODE


1710 ~ 1755 MHz
45 MHz
12 1.0 dB
0.6 dB
1.6 dB
1.8 dB
10 dBm
25 dBm
18 dB
12 dB
2.8 dB
30 dB
30 dB
30 dB
75 dB
50 dB
20 nsec / 5 MHz

DOWN LINK

Operational voltage range


Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

Surge
Protection

Block Diagram

UP LINK

Pass band Frequency range


Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
RF Average Operating power
RF signal Peak Power
Inter-modulation @ ANT port @
1710 ~ 1755 MHz -122 dBm @ 43 dBm 2 tone
3th Passive Inter-modulation @ ANT port @
2110 ~ 2155 MHz -47 dBm @ 43 dBm 2 tone

RET

Outline

Pass band Frequency range


Bandwidth
Gain over temperature
Gain Ripple
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rejection @DC ~ 1690 MHz
@1775 ~ 1815 MHz
@1815 ~ 1990 MHz
@2110 ~ 2170 MHz / Only Rx Filter
@2170 ~ 4000 MHz / Only Rx Filter
Group Delay Distortion (ns) = (Over any 5 MHz)

LNA

LNA Alarm

BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

180.0 x 150.0 x 79.8 mm


<5 Kg
Aluminum
7/16 female
www.aceteq.co.kr

TG26C0R0

2600(LTE) AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm

Regulator

Regulator

CPU

Power

Power
Communication
Logic

Modem

SPDT

Inrush
current

Inrush
current

Current
Limiter &
Switch &
Thermal
Sensor
ASK Signal

ASK Signal
Lightning
Protection
Circuit

Surge
Protection

DC OUT
BTS0

Surge
Protection

RS 485
BTS1

RET

Outline

Block Diagram

UP LINK
Pass band Frequency range
Bandwidth
Gain over temperature
Gain Ripple
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)

AISG INTERFACE
2500 ~ 2570 MHz
70 MHz
12 1.0 dB
1.0 dB
1.7 dB
1.9 dB
14 dBm
25 dBm
18 dB
12 dB
3.0 dB
65 dB
20 nsec / 5 MHz

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
1.8 A ~ 2.4 A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
Ver 2.0

ENVIRONMENTAL SPECIFICATION
Pass band Frequency range
Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
3rd Passive Inter-modulation @ ANT port
5th Passive Inter-modulation @ ANT port

2620 ~ 2690 MHz


70 MHz
40 dB
20 nsec / 5 MHz
0.5 dB
18 dB
0.3 dB
50 dBm
58.6 dBm / 0.545 atm / 800 C
-153 dBc (43 dBm 2 tone)
-160 dBc (43 dBm 2 tone)

POWER CONSUMPTION IN CURRENT ALARM MODE


Operational voltage range
Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

9 ~ 13 V
230 mA ~ 290 mA
12 V
190 mA
<300 mA
BTS 0 and BTS 1

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

www.aceteq.co.kr

Operating Temperature Range


Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>500,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

ACES DTMAs
with AISG

DOWN LINK

270 x 189 x 80 mm
<5.5 Kg
Aluminum
7/16 female

10 ~ 30 V
5W
BTS 0 or BTS1 &BTS 0 and
BTS1

125

TG26C1R0

2600(LTE) AISG 2.0 Double TMA


ANT0

ANT1

Bypass Signal

Bypass Signal

ON/OFF control

ON/OFF control

LNA

LNA

LNA Alarm

LNA Alarm

Regulator

Regulator

CPU

Power

Power
Communication
Logic

Modem

SPDT

Inrush
current

Inrush
current

Current
Limiter &
Switch &
Thermal
Sensor
ASK Signal

ASK Signal
Lightning
Protection
Circuit

Surge
Protection

DC OUT
BTS0

Surge
Protection

RS 485
BTS1

RET

Outline

Block Diagram

UP LINK
Pass band Frequency range
Bandwidth
Gain over temperature
Gain Ripple
Noise Figure @ normal temperature
Noise Figure @ extreme temperature
Output 1 dB Compression
Output IP3 @ 0 dBm (output power ref.)
Return loss
Return loss By-Pass mode
Insertion loss in By-Pass mode
Rx-Tx rejection (Rx1 Path)
Group Delay Distortion (ns) = (Over any 5 MHz)

AISG INTERFACE
2500 ~ 2570 MHz
70 MHz
24 1.0 dB
1.0 dB
1.7 dB
2.0 dB
18 dBm
27 dBm
18 dB
12 dB
3.0 dB
74 dB
20 nsec / 5 MHz

Modem carrier power


Spurious Emission on the unused BTS port
RET current Limit
RET connector pin denition

AISG

3 dBm 2 dB
<-40 dBm
1.8A ~ 2.4A @ 3 seconds
1 10 to 30 VDC
2 NOT USED
3 RS485 B Data Line
4 NOT USED
5 RS485 A Data Line
6 10 to 30 VDC
7 DC ground
8 NOT USED
Ver 2.0

ENVIRONMENTAL SPECIFICATION
DOWN LINK
Pass band Frequency range
Bandwidth
Tx-Rx rejection
Group Delay Distortion = (Over any 5 MHz)
Insertion loss
Return loss
Ripple
RF Average Operating power
RF signal Peak Power
3rd Passive Inter-modulation @ ANT port
5th Passive Inter-modulation @ ANT port

2620 ~ 2690 MHz


70 MHz
40 dB
20 nsec / 5 MHz
0.5 dB
18 dB
0.3 dB
50 dBm
58.6 dBm / 0.545 atm / 800 C
-153 dBc (43 dBm 2 tone)
-160 dBc (43 dBm 2 tone)

ACES DTMAs
with AISG

POWER CONSUMPTION IN CURRENT ALARM MODE


Operational voltage range
Alarm current set range
Nominal Voltage
Current Consumption (Typical value of current)
Current surge at start (Maximum)
DC injected port name

9 ~ 13 V
250 mA ~ 310 mA
12 V
230 mA
<400 mA
BTS 0 and BTS 1

POWER CONSUMPTION IN AISG ALARM MODE


Operational voltage range
Maximum operational power
DC injected port name

126

Operating Temperature Range


Humidity
Storage Temperature Range
Enclosure Protection

-40 ~ +65 C
5 ~ 100%
-40 ~ +70 C
IP67

MISCELLANEOUS
EMC
Safety
MTBF

EN55022/55024,FCC
CB, ETL
>500,000 hours

LIGHTNING PROTECTION
Test port
BTS
ANT

Waveform
requirement
8/20 us
8/20 us

Impulse
current
8KA
8KA

Test result
The electrical function is not changed
The electrical function is not changed

MECHANICAL SPECIFICATION
Dimensions (WxHxD) (except for connectors)
Weight
Material
RF Connector

270 x 189 x 80 mm
<5.5 Kg
Aluminum
7/16 female

10 ~ 30 V
5.5 W
BTS 0 or BTS1 &BTS 0 and
BTS1

www.aceteq.co.kr

TMA Products list

ACE'S Client-specied TMAs


DTMA
128_
129_
130_
131_

800 ACE's TMAs (AISG 2.0) Double TMA


800 ACE's TMAs (AISG 2.0) Double TMA
900 ACE's TMAs (AISG 2.0) Double TMA
1800 ACE's TMAs (AISG 2.0) Double TMA
1900 ACE's TMAs (AISG 2.0) Double TMA

page

2100 ACE's TMAs (AISG 2.0) Double TMA


2600 ACE's TMAs (AISG 2.0) Double TMA

page

page

page

page

132_
133_
134_

page

page

CWA
page

2100 CWA Double TMA

page

ACE'S
Client-specied TMAs

135_
136_

1800 CWA Double TMA

TR08C0R0

800 AISG 2.0 Double TMA

Outline

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

791 ~ 821 MHz

Pass band Frequency range

832 ~ 862 MHz

Bandwidth

30 MHz

Bandwidth

30 MHz

Gain over temperature

24 1.0 dB

Group Delay Distortion = (Over any 5 MHz)

Typ. 22 nsec / 5 MHz

Gain variation over temp.

1.0 dB

Insertion loss

0.5 dB

Noise Figure @over temp.

2.0 dB

Return loss

18 dB

Input 1dB Compression

-5 dBm

Passive Inter-modulation @ ANT port

-116 dBm (IM3) (43 dBm 2 tone)

Input IP3 @0 dBm (output power ref.)

6 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

3.0 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) Typ. 80 nsec / 5 MHz

128

www.aceteq.co.kr

TR08C1R0

800 AISG 2.0 Double TMA

Outline

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

824 ~ 849 MHz

Pass band Frequency range

869 ~ 894 MHz

Bandwidth

25 MHz

Bandwidth

25 MHz

Gain over temperature

32 1.0 dB

Group Delay Distortion = (Over any 5 MHz) 30 nsec / 5MHz

Gain variation over temp.

1.0 dB

Insertion loss

Noise Figure @over temp.

2.2 dB (Ave 1.8)

Return loss

18 dB

Input 1 dB Compression

-7 dBm

Passive Inter-modulation @ ANT port

-116 dBm (IM3) (43 dBm 2 tone)

Input IP3 @ 0 dBm (output power ref.)

5.2 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

4.0 dB

0.8 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 50 nsec / 5 MHz

www.aceteq.co.kr

129

TR09C1R0

900 AISG 2.0 Double TMA

Outline

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

880 ~ 915 MHz

Pass band Frequency range

925 ~ 960 MHz

Bandwidth

35 MHz

Bandwidth

35 MHz

Gain over temperature

32 1.0 dB

Group Delay Distortion = (Over any 5 MHz) 60 nsec / 5 MHz

Gain variation over temp.

1.0 dB

Return loss

18 dB

Noise Figure @over temp.

2.2 dB (Ave 1.8)

Passive Inter-modulation @ ANT port

-116 dBm (IM3) (43 dBm 2 tone)

Input 1 dB Compression

-7 dBm

Input IP3 @ 0 dBm (output power ref.)

5.2 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

4.0 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 90 nsec / 5 MHz

130

www.aceteq.co.kr

TR18C0R1

1800 AISG 2.0 Double TMA


ANT Port 1

ANT Port 2

Lightning and
Surge protection

DC Injection &
Short Circuit
Detector

MHA

MHA

Bypass
Switch

Bypass
Switch

2.176 MHz AISG


filter & converter

DC
OUT
DC
IN 2

DC
IN 1
DC
OUT

BTS Port 1

Outline

Rem ote Downtilt Port

BTS Port 2

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

1710 ~ 1785 MHz

Pass band Frequency range

1805 ~ 1880 MHz

Bandwidth

75 MHz

Bandwidth

75 MHz

Gain over temperature

High : 33 1.0 dB

Group Delay Distortion = (Over any 5 MHz)

20 nsec / 5 MHz

Low : 12 1.0 dB

Insertion loss

0.8 dB

Gain variation over temp.

1.0 dB

Return loss

18 dB

Noise Figure @over temp.

2.2 dB (Ave 1.8)

Passive Inter-modulation @ ANT port

-82 dBc (43 dBm 2 tone)

Input 1 dB Compression

-10 dBm

Input IP3 @ 0 dBm (output power ref.)

3 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

40 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 50 nsec / 5 MHz

www.aceteq.co.kr

131

TR19D0R1

1900 AISG 2.0 Double TMA


ANT Port 1

ANT Port 2

Lightning and
Surge protection

DC Injection &
Short Circuit
Detector

MHA

MHA

Bypass
Switch

Bypass
Switch

2.176 MHz AISG


filter & converter

DC
OUT
DC
IN 2

DC
IN 1
DC
OUT

BTS Port 1

Outline

Rem ote Downtilt Port

BTS Port 2

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

1850 ~ 1910 MHz

Pass band Frequency range

1930 ~ 1990 MHz

Bandwidth

60 MHz

Bandwidth

60 MHz

Gain over temperature

High : 33 1.0 dB

Group Delay Distortion = (Over any 5 MHz)

20 nsec / 5 MHz

Low : 12 1.0 dB

Insertion loss

0.8 dB

Gain variation over temp.

1.0 dB

Return loss

18 dB

Noise Figure @over temp.

2.2 dB (Ave 1.8)

Passive Inter-modulation @ ANT port

-82 dBc (43 dBm 2 tone)

Input IP3 @ 0 dBm (output power ref.)

3 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

4.0 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 50 nsec / 5 MHz

132

www.aceteq.co.kr

TR21C0R1

2100 AISG 2.0 Double TMA


ANT Port 1

ANT Port 2
Lightning and
Surge protection

DC OUT

Overloa d
Protec tion
2.176 Mhz
LOC2
(optional)

12dB
LNA
1

Bypass

Bypass

12dB
LNA
2

C PU
2.176 Mhz
LOC
2.176 Mhz AISG
Split to ANT1 is
optional if LOC2 is
used

Dua l input
DC supply

DC
IN 1

DC
OUT

Outline

RS485

AISG
RET port

BTS Port 1

DC
IN 2

BTS Port 2

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

1920 ~ 1980 MHz

Pass band Frequency range

2110 ~ 2170 MHz

Bandwidth

60 MHz

Bandwidth

60 MHz

Gain over temperature

12 1.0 dB

Group Delay Distortion = (Over any 5 MHz)

9 nsec / 5 MHz

Gain variation over temp.

1.0 dB

Insertion loss

0.4 dB

Noise Figure @over temp.

1.9 dB

Return loss

18 dB

Input 1 dB Compression

-8 dBm

Passive Inter-modulation @ ANT port

-117 dBc (43 dBm 2 tone)

Input IP3 @ 0 dBm (output power ref.)

3 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

2.7 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 20 nsec / 5 MHz

www.aceteq.co.kr

133

TR26C0R0

2600 AISG 2.0 Double TMA


DC and
control

ANT 1

ANT 2

T-bias
&
Modem

Overload
protection

LNA

LNA

13 dB

13 dB

bypass

bypass

Controller

DC
supply
T-bias
&
Modem
Overload
protection

RS485

BTS 1

Outline

DC
out

BTS 2

AISG
RET

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

2500 ~ 2570 MHz

Pass band Frequency range

2620 ~ 2690 MHz

Bandwidth

70 MHz

Bandwidth

70 MHz

Gain over temperature

13 1.0 dB

Insertion loss

0.55 dB

Gain variation over temp.

1.25 dB

Return loss

18 dB

Noise Figure @over temp.

2.2 dB

Passive Inter-modulation @ ANT port

-103 dBc (43 dBm 2 tone)

Input 1 dB Compression

-8 dBm

Input IP3 @ 0 dBm (output power ref.)

3 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

3.0 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 30 nsec / 20 MHz

134

www.aceteq.co.kr

TR18C3R0

1800 CWA Double TMA

Outline

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

1710 ~ 1785 MHz

Pass band Frequency range

1805 ~ 1880 MHz

Bandwidth

75 MHz

Bandwidth

75 MHz

Gain over temperature

33 1.0 dB

Group Delay Distortion = (Over any 5 MHz)

20 nsec / 5 MHz

Gain variation over temp.

1.0 dB

Insertion loss

0.8 dB

Noise Figure @over temp.

2.3 dB (Ave 1.9)

Return loss

18 dB

Input 1 dB Compression

-10 dBm

Passive Inter-modulation @ ANT port

-82 dBc (43 dBm 2 tone)

Input IP3 @ 0 dBm (output power ref.)

3 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

4.0 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 50 nsec / 5 MHz

www.aceteq.co.kr

135

TR21C0R2

2100 CWA Double TMA


ANT 1

ANT 2

RX1

RX1

Logic 1

Logic 2
TX

TX
LNA1

LNA2
Current Alarm
Generator

RX2

RX2
Linear
Regulator

Lightning
Protection
Circuit

Lightning
Protection
Circuit

BTS1

Outline

BTS2

Block Diagram

UP LINK

DOWN LINK

Pass band Frequency range

1920 ~ 1980 MHz

Pass band Frequency range

2110 ~ 2170 MHz

Bandwidth

60 MHz

Bandwidth

60 MHz

Gain over temperature

12 1.0 dB

Group Delay Distortion = (Over any 5 MHz) 10 nsec / 5 MHz

Gain variation over temp.

1.0 dB

Insertion loss

Noise Figure @over temp.

1.9 dB

Return loss

18 dB

Input 1 dB Compression

-8 dBm

Passive Inter-modulation @ ANT port

-116 dBm (IM3) (43 dBm 2 tone)

Input IP3 @ 0 dBm (output power ref.)

3 dBm

Return loss

16 dB

Return loss By-Pass mode

12 dB

Insertion loss in By-Pass mode

2.7 dB

0.5 dB

ACE'S
Client-specied TMAs

Group Delay Distortion (ns) = (Over any 5 MHz) 20 nsec / 5 MHz

136

www.aceteq.co.kr

You might also like