Professional Documents
Culture Documents
Question
Machine-1 has vibration at 12 mm/s at 25 Hz speed, and overall vibration 18 mm/s
Machine-2 has vibration at 3 mm/s at 12,5 Hz speed, and overall vibration 18 mm/s
Machine-3 has vibration at 10 mm/s at 50 Hz speed, and overall vibration 18 mm/s
Power/size all the same. Vibration in RMS value
Case-1, Broadband frequency 2-15000 Hz
Case-2, Broadband frequency 10-1000 Hz
Case-1 Which machine is the best condition ?
Case-2 Which machine is the shortest MTTF ?
Which machine would give the highest MTTF ?
Agenda
1
Background,
vibration severity chart ISO guidelines
B
Understand ISO-10816-1
Conclusion
1. Background
And many vibration
Severity charts e.g.
Crest engineering
GD engineering
IRD, Etc.
1. Background
Table-3
Class-3
Class-2
4. Understand ISO-10816-1
4. Understand ISO-10816-1
4. Understand ISO-10816-1
Question
Machine-1 has vibration at 12 mm/s rms at 25 Hz speed, and overall vibration 18 mm/s rms
Machine-2 has vibration at 3 mm/s rms at 12,5 Hz speed, and overall vibration 18 mm/s rms
Machine-3 has vibration at 10 mm/s rms at 50 Hz speed, and overall vibration 18 mm/s rms
Power/size all the same.
Case-1, Broadband frequency 2-15000 Hz
Case-2, Broadband frequency 10-1000 Hz
Case-1 Which machine is the best condition ?
Case-2 Which machine is the shortest MTTF ?
Which machine would give the highest MTTF ?
Answer
Machine-1 has vibration at 12 mm/s at 25 Hz speed, and overall vibration 18 mm/s
Machine-2 has vibration at 3 mm/s at 12,5 Hz speed, and overall vibration 18 mm/s
Machine-3 has vibration at 10 mm/s at 50 Hz speed, and overall vibration 18 mm/s
Power/size all the same. Vibration in RMS value
Case-1, Broadband frequency 2-15000 Hz
Case-2, Broadband frequency 10-1000 Hz
Case-1 Which machine is the best condition ? Cant point 1 or 2
Case-2 Which machine is the poorest condition ? Cant point 2or 3
Which machine would give the highest MTTF ? Machine-2
5. Conclusion
High vibration does not mean bad
Low vibration does not mean good
Low vibration amplitude at high frequency is more dangerous than low frequency
Low vibration at high damping is more dangerous than high vibration at low damping
ISO-18016 is based on 3600 rpm at 1,7 factor of inertial mass. That indicates
unacceptable condition, but when dismantle, it is still good condition.