Professional Documents
Culture Documents
Item No.
Description of items
Qty
Unit
(In figure)
Rate
(In words)
Amount
(in figure)
1.1.1
1.2
1.2.1
1.3
1.3.1
1.3.1.1
360
cum
8248
cum
635
metre
Page 1 of 45
Item No.
Description of items
Qty
Unit
(In figure)
1.4
1.5
1.5.1
1.6
2830
cum
675
cum
Supplying and filling in plinth with local fine sand under floors, including
watering, ramming, consolidating and dressing complete.
453
cum
Rate
(In words)
Amount
(in figure)
2.1.1
708
cum
10
cum
2.2
2.2.1
2.3
Page 2 of 45
Item No.
Description of items
Qty
Unit
(In figure)
2.3.1
2.4
2.5
2.6
2.6.1
2.6.1.1
50
sqm
492
sqm
429
sqm
321
sqm
5260
sqm
3437
17602
12783
12521
647
sqm
sqm
sqm
sqm
sqm
Rate
(In words)
Amount
(in figure)
Making plinth protection with red sand stone and laying therein Cement
Mortar 1:4 (cement : 4 coarse sand) 20mm thick (average) i/c pointing of
joints with Cement Mortar 1:3 (1 cement :3 coarse sand).
With red sand stone slab
40 to 50 mm thick
Page 3 of 45
Item No.
Description of items
Qty
Unit
(In figure)
3.1.7
3.1.7.1
3.2
3.2.1
3.3
3.3.1
3.4
3.4.1
3.5
3.5.1
566
metre
3067
sqm
180
sqm
580000
kg
1181610
kg
Rate
(In words)
Amount
(in figure)
Page 4 of 45
Item No.
Description of items
Qty
Unit
(In figure)
3.6
3.5.1
3.5.2
2900
5379
cum
cum
128
cum
5225
cum
Half brick masonry with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in superstructure above plinth level up to floor V
level.
Cement mortar 1:4 (1 cement :4 coarse sand)
5104
sqm
Rate
(In words)
Amount
(in figure)
4.2.1
4.3
4.3.1
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in foundation and plinth in:
Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 7.5 in superstructure above plinth level upto floor V level.
Page 5 of 45
Item No.
Description of items
Qty
Unit
(In figure)
4.4
4.4.1
4.4.2
Brick work with common burnt clay machine moulded modular bricks of
class designation 12.5 in exposed brick work including making horizontal
and vertical grooves 10mm wide 12mm deep complete in cement mortar
1:6 (1 cement : 6 coarse sand).
From ground level upto plinth level.
Above plinth level upto floor V level.
83
48
cum
cum
80
sqm
Providing and fixing 18mm thick gang saw cut mirror polished
(premoulded and prepolished) machine cut for kitchen platforms, vanity
counters, window sills , facias and similar locations of required size of
approved shade, colour and texture laid over 20mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white
cement, mixed with matching pigment, epoxy touch ups, including
rubbing, curing moulding and polishing to edge to give high gloss finish
etc. complete at all levels.
Granite of any colour and shade
Area of slab upto 0.50 sqm
767
sqm
Rate
(In words)
Amount
(in figure)
5.1.1
5.1.1.1
5.2
5.2.1
5.2.1.1
Granite work gang saw cut (polished and machine cut) of thickness 18
mm for wall lining (veneer work), backing filled with a grout of average
12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including
pointing with white cement mortar 1:2 (1 white cement : 2 marble dust)
with an admixture of pigment to match the marble shade (To be secured
to the backing by means of cramps, which shall be paid for separately).
Page 6 of 45
Item No.
Description of items
Qty
Unit
(In figure)
5.3
5.3.1
1281
metre
Providing and fixing ISI marked flush door shutters conforming to IS:
2202 (Part I) decorative type, core of block board construction with
frame of 1st class hard wood and well matched teak 3 ply veneering with
vertical grains or cross bands and face veneers on both faces of
shutters.
35 mm thick including ISI marked Stainless Steel butt hinges with
necessary screws.
2504
sqm
2500
metre
44
1288
each
each
Rate
(In words)
Amount
(in figure)
6.1.1
6.2
6.3
6.3.1
6.3.2
Providing and fixing aluminium sliding door bolts ISI marked anodised
(anodic coating not less than grade AC 10 as per IS : 1868) transparent
or dyed to required colour or shade with nuts and screws etc. complete :
300x16 mm
250x16 mm
Page 7 of 45
Item No.
Description of items
Qty
Unit
(In figure)
6.4
6.4.1
6.4.2
6.4.3
6.5
6.5.1
6.5.2
6.6
6.7
Rate
(In words)
Amount
(in figure)
Providing and fixing aluminium tower bolts ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed
to required colour or shade with necessary screws etc. complete :
2927
4144
276
each
each
each
125 mm
100 mm
356
2950
each
each
Providing and fixing factory made P.V.C. door frame of size 50x47mm
with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets
of 15x15mm M.S. square tube, the vertical door frame profiles to be
reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber
gasket weather seal to be provided through out the frame. The door
frame to be fixed to the wall using M.S. screws of 65/100mm size,
complete as per manufacturers specification and direction of Engineer-inCharge.
950
metre
250x10 mm
200x10 mm
150x10 mm
Providing and fixing aluminium handles ISI marked anodised (anodic
coating not less than grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade with necessary screws etc. complete :
Page 8 of 45
Item No.
Description of items
Qty
Unit
(In figure)
6.7.1
6.8
6.8.1
6.8.1.1
6.9
6.9.1
25 mm thick PVC flush door shutters made out of a one piece Multi
chamber extruded PVC section of the size of 762 mm X 25 mm or less
as per requirement with an average wall thickness of 1 mm ( 0.3 mm).
PVC foam end cap of size 23x10 mm are provided on both vertical
edges to ensure the overall thickness of 25 mm. M.S. tube having
dimensions 19 mm x 19 mm and 1.0 mm ( 0.1 mm) is inserted along
the hinge side of the door. Core of the door shutter should be filled with
High Density Polyurethane foam. The Top & Bottom edges of the shutter
are covered with an end-cap of the size 25 mm X 11 mm. Door shutter
shall be reinforced with special polymeric reinforcements as per
manufacturers specification and direction of Engineer-in-charge to take
up necessary hardware and fixtures. Stickers indicating the locations of
hardware will be pasted at appropriate places
270
sqm
Providing and fixing wire gauge shutters using stainless steel grade 304
wire gauge with wire of dia 0.5 mm and average width of aperture 1.4
mm in both directions for doors, windows and clerestory windows with
necessary screws:
35 mm thick shutters with ISI marked stainless steel butt hinges of
required size.
Second class teak wood.
2450
sqm
Providing and fixing fly proof stainless steel grade 304 wire gauge, to
windows and clerestory windows using wire gauge with average width of
aperture 1.4 mm in both directions with wire of dia. 0.50 mm all
complete.
With 12 mm stainless steel U beading.
700
sqm
Rate
(In words)
Amount
(in figure)
Page 9 of 45
Item No.
Description of items
Qty
Unit
(In figure)
6.10
Rate
(In words)
Amount
(in figure)
Page 10 of 45
Item No.
Description of items
Qty
Unit
(In figure)
surface and outer frame of box of block board and 55mm wide x 12mm
thick moulded beading also shall be provided alround the outer face of
cup board shutters with superior quality favicoal and nails etc. The
external un-exposed surface of box in contact with plaster/ floor shall be
treated with oil type wood preservative of approved quality before fixing.
The each shutter of cup board shall be fixed with 4Nos. stainless steel
butt hinges of size 75x47x1.80mm with stainless steel screws 30mm
including the cost of providing/fixing of 75mm powder coated aluminium
handle (one on each shutter), horizontal type magnetic catchers (one at
top and one at bottom on single leaf shutter and similarly on one shutter
of double leaf shutter; and also including the cost of providing/ fixing of
stainless steel ovel shape 25mm (wide ovel) curtain rod with stainless
steel brackets with necessary screws complete as per the direction of
the Engineer-in-Charge. Finishing the lipping/ moulding by applying two
or more coats of French spirit polish after applying a coat of wood filler
complete as per the direction of Engineer-in-charge and approved
drawings (Length and height of box shall be measured for payment).
1220.00
Rate
(In words)
Amount
(in figure)
Sqm
Page 11 of 45
Item No.
Description of items
Qty
Unit
(In figure)
6.11
Extra for fabricating and fixing 150mm high drawers in cup boards,
consisting frame of 19mm thick block board with commercial veneering
on both faces conforming to IS-1659 of approved manufacture fixed over
6mm thick ply wood with commercial veneering on both sides
conforming to IS-303 of approved manufacture with superior quality
favicoal and nails including covering the exposed visible surface inside
the drawer and front face from out side of block board/ ply wood with
0.80mm thick sunmica of superior quality of approved manufacture with
superior quality favicoal and pressing with nails/ paper tap and polishing
the outer exposed surface of drawering left out members where sunmica
is not provided with one or more coat of French spirit polish with over
coat of wood filler. The exposed edges of block board shall be covered
with teak wood matching shade French spirit polish lipping 20x5mm and
fixing the each drawer in the cup board by providing a pair of 450mm
long Telescopic drawer channels with necessary screws of approved
make for smooth opening of drawer and including the cost of providing/
fixing of stainless steel folded type handle at front of each drawer and
also providing and fixing drawer lock of superior quality on one drawer in
each cup board. (Length and breath of the drawer shall be measured for
payment).
100.00
sqm
54
kg
Rate
(In words)
Amount
(in figure)
Page 12 of 45
Item No.
Description of items
Qty
Unit
(In figure)
7.2
7.2.2
Providing and fixing 1mm thick M.S. sheet door with frame of
40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and
corners, all necessary fittings complete, including applying a priming
coat of approved steel primer.
Using flats 30x6mm for diagonal braces and central cross piece.
202
sqm
7.3
Providing and fixing factory made ISI marked steel glazed doors,
windows and ventilators side /top /centre hung with beading and all
members such as F7D, F4B, K11 B and K12 B etc. complete of standard
rolled steel sections, joints mitred and flash butt welded and sash bars
tenoned and riveted, including providing and fixing of hinges, pivots,
including priming coat of approved steel primer , but excluding the cost
of other fittings, complete all as per approved design (sectional weight of
only steel members shall be measured for payment).
7.3.1
36
kg
Providing and fixing T-iron frames for doors, windows and ventilators of
mild steel Tee-sections, joints mitred and welded, including fixing of
necessary butt hinges and screws and applying a priming coat of
approved steel primer.
Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete
block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size).
243
kg
7.4
7.4.1
7.5
Rate
(In words)
Amount
(in figure)
Page 13 of 45
Item No.
Description of items
Qty
Unit
(In figure)
7.5.1
7.6
7.7
7.7.1
15230
kg
Providing and fixing stainless steel (Grade 304) railing made of Hollow
tubes, channels, plates etc. including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitting the same with
necessary stainless steel nuts and bolts complete i/c fixing the railing
with necessary accessories & stainless steel dash fasteners, stainless
steel bolts etc., of required size, on the top of the floor or the side of
waist slab with suitable arrangement as per approval of Engineer-incharge. (for payment purpose only weight of stainless steel members
shall be considered excluding fixing accessories such as nuts, bolts,
fasteners etc.)
7590
kg
Providing and fixing hand rail of approved size by welding etc. to steel
ladder railing, balcony railing, staircase railing and similar works,
including applying a priming coat of approved steel primer.
M.S. tube.
7060
kg
139
sqm
Rate
(In words)
Amount
(in figure)
SubHead: FLOORING
8.1
Page 14 of 45
Item No.
Description of items
Qty
Unit
(In figure)
8.2
8.2.1
8.3
8.3.1
8.4
8.5
8.6
sqm
Kota stone slab flooring over 20 mm (average) thick base laid over and
jointed with grey cement slurry mixed with pigment to match the shade of
the slab including rubbing and polishing complete with base of cement
mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick.
1700
sqm
170
sqm
Providing and fixing Ist quality ceramic glazed wall tiles of size
200x300mm conforming to IS : 15622 (thickness to be specified by the
manufacturer) of approved make in all colours, shades except burgundy,
bottle green, black of any size as approved by Engineer-in-Charge in
skirting, risers of steps and dados over 12 mm thick bed of cement
Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement
slurry @ 3.3kg per sqm including pointing in white cement mixed with
pigment of matching shade complete.
4700
sqm
1650
sqm
Rate
(In words)
Amount
(in figure)
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars
laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse
sand) and jointed with grey cement slurry mixed with pigment to match
the shade of the slabs, including rubbing and polishing complete.
Page 15 of 45
Item No.
Description of items
Qty
Unit
(In figure)
8.7
8.8
8.9
8.9.1
8.9.1.1
11000
sqm
1100
sqm
Providing and fixing 18mm thick gang saw cut mirror polished granite
flooring over 25mm thick (average) base cement mortar 1:4 laid, joint
tilted with white cement mixed with matching pigment etc. complete as
per direction of Engineer-in-charge.
Granite of any colour and shade
Area of slab over 0.50 sqm.
2900
sqm
Rate
(In words)
Amount
(in figure)
Page 16 of 45
Item No.
Description of items
Qty
Unit
(In figure)
8.10
Providing and fixing glass mosaic tiles of size 20x20x4mm in square grid
pattern of approved make ACCURA/ ITALIA (Pear/ Melody seried)/ TL
series or equivalent on floors and on walls at all heights of required
random colours mix design conforming to IS: 136030 made of raw
material of glass with curved V shape adeges of mosaic for firm
adhession including fixing the tiles with adhesive @ 2.25kg. Per Sqm.
And finishing the joints readymixed grouting compound of approved
make and matching sheet shade and finally washing and cleaning the
complete as per directions of the Engineer-In-Charge.
45
Sqm
13
sqm
13
sqm
Rate
(In words)
Amount
(in figure)
SubHead: ROOFING
9.1
9.1.1
9.2
9.2.1
Page 17 of 45
Item No.
Description of items
Qty
Unit
(In figure)
9.3
9.4
9.4.1
50
each
Providing and fixing 100 mm diameter and 60 cm long rain water spout
in cement mortar 1:4 (1 cement : 4 fine sand)
Stone ware spout
each
Rate
(In words)
Amount
(in figure)
Page 18 of 45
Item No.
Description of items
Qty
Unit
(In figure)
9.5
Rate
(In words)
Amount
(in figure)
Page 19 of 45
Item No.
Description of items
Qty
Unit
(In figure)
Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of
size 25x35x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long
dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level
clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre
along main 'T', bottom exposed with 24 mm of all T-sections shall be prepainted with polyster baked paint, for all heights, as per specifications,
drawings and as directed by engineer-in-charge.
Note :- Only calcium silicate false ceiling area will be measured from wall
to wall. No deduction shall be made for exposed frames/opening (cut
outs) having area less than 0.30 sqm.The calcium silicate ceiling tile
shall have NRC value of 0.50 (Minimum), light reflection > 85%, non combustible as per B.S. 476 part IV, 100% humidity resistance and also
having thermal conductivity <0.043 w/m 0 KC.
9.6
9.7
9.7.1
1650
sqm
4700
sqm
4100
kg
Rate
(In words)
Amount
(in figure)
SubHead: FINISHING
Page 20 of 45
Item No.
Description of items
Qty
Unit
(In figure)
10.1
10.1.1
10.1.2
10.2
64
26300
sqm
sqm
676
12790
sqm
sqm
10.3
10.3.1
13935
sqm
10.4
10.4.1
14439
sqm
38205
sqm
2410
sqm
51805
sqm
10.5.1
10.6
10.6.1
10.7
Amount
(in figure)
10.2.1
10.2.2
10.5
Rate
(In words)
Page 21 of 45
Item No.
Description of items
Qty
Unit
(In figure)
11.1
11.1.1
11.2
Brick edging in full brick width and half brick depth including excavation,
refilling and disposal of surplus earth lead upto 50 metres.
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
321
metre
1050
sqm
Providing and fixing water closet squatting pan (Indian type W.C. pan)
with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.
flushing cistern, including flush pipe, with manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures
complete including cutting and making good the walls and floors
wherever required :
Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480
mm with flush pipe and integrated type foot rests.
78
each
Providing and fixing white vitreous china pedestal type water closet
(European type W.C. pan) with seat and lid, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually controlled
device (handle lever), conforming to IS : 7231, with all fittings and
fixtures complete including cutting and making good the walls and floors
wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
29
each
Rate
(In words)
Amount
(in figure)
12.1.1
12.2
12.2.1
Page 22 of 45
Item No.
Description of items
Qty
Unit
(In figure)
12.3
12.3.1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps,32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require :
White Vitreous China Angle back wash basin size 600x480 mm with
single 15 mm C.P. brass pillar tap.
each
each
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per
IS 13983 with C.I. brackets and stainless steel plug 40 mm including
painting of fittings and brackets, cutting and making good the walls
wherever required :
Kitchen sink without drain board
610x510 mm bowl depth 200 mm.
12
each
12.6.1
12.6.1.1
12.6.1.2
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
Flexible pipe
32 mm dia
40 mm dia
5
12
each
each
12.7
12.7.1
12.7.1.1
metre
12.7.2
12.7.2.2
75 mm diameter :
Centrifugally cast (spun) iron socketed pipe as per IS: 3989.
530
metre
12.4
12.5
12.5.1
12.5.1.1
12.6
Rate
(In words)
Amount
(in figure)
Providing and fixing white vitreous china pedestal for wash basin
completely recessed at the back for the reception of pipes and fittings.
Page 23 of 45
Item No.
Description of items
Qty
Unit
(In figure)
12.8
101
120
each
each
12.9.1
12.9.1.1
Providing and fixing bend of required degree with access door, insertion
rubber washer 3 mm thick, bolts and nuts complete.
75 mm dia
Sand cast iron S&S as per IS- 3989
65
each
12.10
12.10.1
12.10.1.1
12.10.2
12.10.2.1
21
each
65
each
101
each
120
each
21
each
12.8.1
12.8.2
12.9
Providing and fixing single equal plain junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete.
12.11.1 100x100x100 mm
12.11.1.1 Sand cast iron S&S as per IS - 3989
12.11.2 75x75x75 mm
12.11.2.1 Sand cast iron S&S as per IS - 3989
Rate
(In words)
Amount
(in figure)
12.11
12.12
Providing and fixing terminal guard:
12.12.1 100 mm
12.12.1.1 Sand cast iron S&S as per IS - 3989
Page 24 of 45
Item No.
Description of items
Qty
Unit
(In figure)
12.13
12.13.1
12.13.1.1
12.13.2
12.13.2.1
each
20
each
Providing lead caulked joints to sand cast iron/ centrifugally cast (spun)
iron pipes and fittings of diameter:
100 mm
75 mm
390
505
each
each
Providing and fixing M.S. stays and clamps for sand cast iron/
centrifugally cast (spun) iron pipes of diameter :
100 mm
21
each
Providing and fixing trap of self cleansing design with screwed down or
hinged grating with or without vent arm complete, including cost of
cutting and making good the walls and floors :
12.16.1 100 mm inlet and 75 mm outlet
12.16.1.1 Sand Cast iron S&S as per IS- 1729.
140
each
Providing and fixing 100mm diameter Stainless Steel (of minimum grade
304) grating (jali with frame) for gully, floor or Nahani trap of the make as
approved by the Engineer-in-Charge.
230
each
130
each
12.14
12.14.1
12.14.2
12.15
12.15.1
Rate
(In words)
Amount
(in figure)
12.16
12.17
12.18
Page 25 of 45
Item No.
Description of items
Qty
Unit
(In figure)
12.19
12.20
12.21
464
sqm
30
each
Providing and fixing 1st quality white vitreous china under counter oval
shape wash basin of parryware or equivalent of size 550x400 with C.I.
bracket i/c painting of fittings and central hole C.P. brass mixer of Jaquar
(Queen's Series Cat. No. 7167 B GA) or equivalent make, 32mm waste
coupling of Jaquar Cat. No. ALD 709 or equivalent including C.P. boottle
trap of Jaquar Cat. No. ALD 769 and pipe of Jaquar or equivalent make
to wall with CP brass flange and rubber stoper complete i/c cutting and
making good the walls wherever required as per the direction of the
Engineer-in-Charge.
183
each
Rate
(In words)
Amount
(in figure)
Page 26 of 45
Item No.
Description of items
Qty
Unit
(In figure)
12.22
Providing and fixing CP brass towel ring fixed to wooden cleats with CP
brass screws complete as per direction of Engineer-in-charge. (Jaquar
make Cat. No. AQN 7721 or equivalent)
10
each
Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.
External work :
50 mm dia. nominal bore
30
metre
each
Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
25 mm nominal bore
32 mm nominal bore.
50 mm nominal bore
6
18
1
each
each
each
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
25 mm nominal bore
10
each
Providing and fixing uplasticised PVC connection pipe with brass unions
:
45 cm length
15 mm nominal bore
249
each
Rate
(In words)
Amount
(in figure)
13.1.1
13.2
13.2.1
13.3
13.3.1
13.3.2
13.3.3
13.4
13.4.1
13.5
13.5.1
13.5.1.1
Page 27 of 45
Item No.
Description of items
Qty
Unit
(In figure)
13.6
13.6.1
13.7
13.7.1
13.8
13.8.1
13.8.2
13.9
13.9.1
13.10
each
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic
paint of approved quality :
50 mm diameter pipe
30
metre
30
340
metre
metre
Providing and fixing G.I. Union in G.I. pipe including cutting and
threading the pipe and making long screws etc. complete (New work)
50mm nominal bore
each
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
80000
per litre
Rate
(In words)
Amount
(in figure)
Page 28 of 45
Item No.
Description of items
Qty
Unit
(In figure)
13.11
Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931
15 mm nominal bore.
110
each
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 gms.
15 mm nominal bore
115
each
55
each
Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
15 mm nominal bore
300
each
Providing and fixing stainless steel grade AISI 316L/AISI 304 pipes
confirming to JISG3448, JWWA G116 complete with Press-Fit VProfile joining system (double crimping), EPDM O-ring capable to
withstand temperature upto 110 degree centigrade alongwith fittings,
such as sockets, bends, elbows, tees, reducers, unions, flanges etc.
necessary adapters for SS/GI/Cooper and CP fittings complete.
Concealed work, including cutting chases and making good the wall etc.
13.15.1 15.88mm outer dia pipe (wall thickness 0.8mm)
13.15.1.1 22.22mm outer dia pipe (wall thickness 1.00mm)
360
470
metre
metre
13.11.1
13.12
13.12.1
13.13
13.13.1
13.14
13.14.1
Rate
(In words)
Amount
(in figure)
13.15
Page 29 of 45
Item No.
Description of items
Qty
Unit
(In figure)
13.16
13.16.1
13.16.2
13.17
13.17.1
13.18
13.19
Providing and fixing stainless steel grade AISI 316L/AISI 304 pipes
confirming to JISG3448, JWWA G116 complete with Press-Fit VProfile joining system (double crimping), EPDM O-ring capable to
withstand temperature upto 110 degree centigrade alongwith fittings,
such as sockets, bends, elbows, tees, reducers, unions, flanges etc.
necessary adapters for SS/GI/Cooper and CP fittings complete.
Internal work - Exposed on wall
22.22mm outer dia pipe (wall thickness 1.00mm)
34.00mm outer dia pipe (wall thickness 1.22mm)
140
920
metre
metre
340
metre
Providing and fixing CP Brass hand shower (health fauced) with 8mm
dia -100cm. Long flexible tube & wall hook of Jaquar make category
No.573 GA or equivalent complete in all respect. 15mm nominal bore.
48
each
Providing and fixing CP Brass shower arm 190mm long light body wall
flenge of Jaquar Make category No.477 or equivalent complete in all
respect.
53
each
Rate
(In words)
Amount
(in figure)
Providing and fixing stainless steel grade AISI 316L/AISI 304 pipes
confirming to JISG3448, JWWA G116 complete with Press-Fit VProfile joining system (double crimping), EPDM O-ring capable to
withstand temperature upto 110 degree centigrade alongwith fittings,
such as sockets, bends, elbows, tees, reducers, unions, flanges etc.
necessary adapters for SS/GI/Cooper and CP fittings complete.
External work
SubHead: DRAINAGE
Page 30 of 45
Item No.
Description of items
Qty
Unit
(In figure)
14.1
14.1.1
14.1.2
14.1.3
14.2
14.2.1
14.2.2
14.2.3
14.4
14.4.1
14.4.1.1
14.5
14.5.1
14.5.2
Providing, laying and jointing glazed stoneware pipes class SP-1 with
stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine
sand) including testing of joints etc. complete :
100 mm diameter
150 mm diameter
200 mm diameter
92
65
200
metre
metre
metre
92
65
200
metre
metre
metre
Providing and fixing square-mouth S.W. gully trap class SP1 complete
with C.I. grating brick masonry chamber with water tight C.I. cover with
frame of 300 x300 mm size (inside) the weight of cover to be not less
than 4.50 kg and frame to be not less than 2.70 kg as per standard
design :
100x100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class
designation 7.5
38
each
65
30
metre
metre
Rate
(In words)
Amount
(in figure)
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture of cement mortar in the proportion of
1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
250 mm dia. R.C.C. pipe
300 mm dia. R.C.C. pipe
Page 31 of 45
Item No.
Description of items
Qty
Unit
(In figure)
14.6
14.6.1
14.6.2.1
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame
(light duty) 455x610 mm internal dimensions total weight of cover and
frame to be not less than 38 kg (weight of cover 23 kg and weight of
frame 15 kg) :
With Sewer bricks conforming to IS : 4885
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame
(medium duty) 500 mm internal diameter, total weight of cover and
frame to be not less than 116 kg (weight of cover 58 kg and weight of
frame 58 kg) :
With Sewer bricks conforming to IS : 4885
14.7
14.7.1
14.7.1.1
14.6.1.1
14.6.2
16
each
10
each
metre
Rate
(In words)
Amount
(in figure)
Page 32 of 45
Item No.
Description of items
Qty
Unit
(In figure)
14.8
22
each
30324
kg
Rate
(In words)
Amount
(in figure)
Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and
IS: 1285, fixing with dash fasteners of required dia and size, including
necessary filling up the gaps at junctions, i.e. at top, bottom and sides
with required EPDM rubber/ neoprene gasket etc. Aluminium sections
shall be smooth, rust free, straight, mitred and jointed mechanically
wherever required including cleat angle, Aluminium snap beading for
glazing / paneling, C.P. brass / stainless steel screws, all complete as
per architectural drawings and the directions of Engineer-in-charge.
(Glazing, paneling and dash fasteners to be paid for separately) :
15.1.1
15.1.1.1
Page 33 of 45
Item No.
Description of items
Qty
Unit
(In figure)
15.1.2
15.1.2.1
15.2
15.2.1
15.3
15.3.1
15.3.2
15.4
15030
kg
28
sqm
755
324
sqm
sqm
Rate
(In words)
Amount
(in figure)
Page 34 of 45
Item No.
Description of items
Qty
Unit
(In figure)
15.4.1
15.5
15.5.1
15.6
15.6.1
15.7
15.7.1
15.8
15.8.1
21
each
972
kg
Providing and fixing stainless steel (SS 304 grade) adjustable friction
windows stays of approved quality with necessary stainless steel screws
etc. to the side hung windows as per direction of Engineer-in-charge
complete.
255 X 19 mm
3716
each
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0
mm thick & 2100 mm long with SS screws etc .complete as per
direction of Engineer-in-Charge.
Powder coated minimum thickness 50 micron aluminium tubular handle
bar.
each
42
each
Rate
(In words)
Amount
(in figure)
Providing and fixing aluminium round shape handle of outer dia 100mm
with SS screws etc. Complete as per direction of Engineer-in-charge
Powder coated minimum thickness 50 micron aluminium
Page 35 of 45
Item No.
Description of items
Qty
Unit
(In figure)
15.9
2055
Rate
(In words)
Amount
(in figure)
kg
Page 36 of 45
Item No.
Description of items
Qty
Unit
(In figure)
15.10
Rate
(In words)
Amount
(in figure)
Page 37 of 45
Item No.
Description of items
Qty
Unit
(In figure)
The item includes cost of all material & labour component, the cost of all
mock ups at site, cost of all samples of the individual components for
testing in an approved laboratory, field tests on the assembled working
curtain wall with aluminium composite panel cladding, cleaning and
protection of the curtain wall with aluminium composite panel cladding till
the handing over of the building for occupation. Base frame work for
ACP cladding is payable under the relevant aluminium items. The
Contractor shall provide curtain wall with aluminium composite panel
cladding, having all the performance characteristics all complete, as per
the Architectural drawings, as per item description, as specified, as per
the approved shop drawings and as directed by the Engineer-in-Charge.
However, for the purpose of payment, only the actual area on the
external face of the curtain wall with Aluminum Composite Panel
Cladding (including width of groove) shall be measured in sqm. up to two
decimal places.
1260
sqm
91
metre
Rate
(In words)
Amount
(in figure)
16.1.1
Page 38 of 45
Item No.
Description of items
Qty
Unit
(In figure)
16.2
16.3
1650
Rate
(In words)
Amount
(in figure)
sqm
Page 39 of 45
Item No.
Description of items
Qty
Unit
(In figure)
16.3.1
4700
Rate
(In words)
Amount
(in figure)
sqm
Page 40 of 45
Item No.
Description of items
Qty
Unit
(In figure)
Rate
(In words)
Amount
(in figure)
ELECTRICAL WORK
1
a)
2
a)
b)
c)
d)
e)
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FR PVC insulated copper conductor single core cable in surface/
recessed steel conduit with modular switch, modular plate, suitable GI
box and earthing the point with 1.5 sq.mm FR PVC insulated copper
conductor single core cable etc. as required.
Group A
4297
point
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated
copper conductor single core cable in surface/ recessed steel conduit, 2
way modular switch. Modular plate, suitable GI box and earthing the
point with 1.5 sq.mm FR PVC insulated copper conductor single core
cable etc. as required.
70
point
Wiring for light/ power plug with 2 x 4 sq.mm FR PVC insulated copper
conductor single core cable in surface/ recessed steel conduit alongwith
1 No. 4 sq.mm FR PVC insulated copper conductor single core cable for
loop earthing as required.
4000
metre
Wiring for light/ power plug with 4 x 4 sq.mm FR PVC insulated copper
conductor single core cable in surface/ recessed steel conduit alongwith
2 Nos 4 sq.mm FR PVC insulated copper conductor single core cable
for loop earthing as required.
4000
metre
Wiring for circuit/ subamin wiring alongwith earth wire with the following
sizes of FR PVC insulated copper conductor, single core cable in
surface/ recessed steel conduit as required.
2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
4 x 1.5 sq.mm + 2 x 1.5 sq.mm earth wire
2 x 6 sq.mm + 1 x 6 sq.mm earth wire
4 X 10 sq. mm + 2 X 10 sq. mm earth wire
4 X 16 sq. mm + 2 X 16 sq. mm earth wire
2500
2500
200
1200
1200
metre
metre
metre
metre
metre
Page 41 of 45
Item No.
Description of items
Qty
Unit
(In figure)
a)
b)
7
a)
8
10
11
4000
5000
metre
metre
500
metre
300
metre
Supplying and drawing cat-6 UTP cable in the existing surface/ recessed
steel/ PVC conduit as required.
14000
metre
Supplying and fixing stepped type electronic fan regulator on the existing
modular plate switch box including connections but excluding modular
plate etc. as required.
818
each
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess including providing and fixing 6 pin 5/6 &
15/16 amps modular socket outlet and 15/16 amps modular switch,
connection, painting etc. as required.
796
each
Rate
(In words)
Amount
(in figure)
Page 42 of 45
Item No.
Description of items
Qty
Unit
(In figure)
12
13
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess including providing and fixing 3 pin 5/6
Amp.modular socket outlet and 5/6 Amp Modular Switch, Connection
etc. as reqd. (For light plugs to be used in Non-Residential Buildings.)
655
each
Supplying and fixing suitable size GI box with modular plate and cover in
front on surface or in recess including providing and fixing 3 Nos. 5/6
Amp. Modular Socket Outlet and 1 No. 15 Amp. Modular Switch
connection, painting etc. reqd. (For computer point).
608
each
14
a)
1 or 2 Module (75mmX75mm)
648
each
15
608
29
11
Each
each
each
Supplying and fixing following way, single pole and neutral, sheet steel,
MCB distribution board, 240 volts, on surface/recess, complete with
tinned copper bus bar, neutral bus bar, earth bar, din bar,
interconnections, power painted including earthing etc as required (But
without MCB/RCCB/Isolator).
2 + 8 Way double door.
each
a)
b)
c)
16
a)
Rate
(In words)
Amount
(in figure)
Page 43 of 45
Item No.
Description of items
Qty
Unit
(In figure)
17
a)
b)
c)
18
a)
b)
19
20
a)
b)
21
a)
b)
Supplying and fixing following way, horizontal type three pole and
neutral, sheet steel, MCB distribution board, 415 volts, on surface/
recess, complete with tinned copper bus bar, neutral bus bar, earth bar,
din bar, interconnections, powder painted including earthing etc. as
required. (But without MCB/RCCB/Isolator)
4 way, Double door
6 way, Double door
8 way, Double door
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in
the existing MCB DB complete with connections, testing and
commissioning etc. as required.
Single pole
Single pole and neutral
22
23
45
Each
Each
Each
1512
3
Each
Each
Supplying and fixing single pole blanking plate in the existing MCB DB
complete etc. as required.
270
Each
Supplying and fixing following amps rating, 240/415 volts, "C" curve,
miniature circuit breaker suitable for inductive load of following poles in
the existing MCB DB complete with connections, testing and
commissioning etc. as required.
40 Amp Triple pole
63 Amp Triple pole
40
40
Each
Each
Supplying and fixing following rating, four pole, (three phase and
neutral), 415 volts, RCBO, having a sensitivity current upto 300
milliamperes in the existing MCB DB complete with connections, testing
and commissioning etc. as required.
40 amps
63 amps
45
45
Each
Each
Rate
(In words)
Amount
(in figure)
Page 44 of 45
Item No.
Description of items
Qty
Unit
(In figure)
22
a)
b)
23
24
25
26
10
10
Each
Each
Supplying Placing and fixing of hexagonal type fan box 150 mm dia
made out of 1.6 mm thick M.S. Sheet alongwith 12mm dia M.S. hook
complete with phenolic laminated sheet covered etc. as reqd.
818
each
Set
50
metre
75
metre
Rate
(In words)
Amount
(in figure)
Page 45 of 45