Professional Documents
Culture Documents
Building No. : 1
Length (m)
Roof Slope
Height (m) from FFL
1:10
32.300 Clear Height at Eave
Diagonal (Rods)
Diagonal (Angles)
None
Endwalls
Diagonal (Angles)
@ grid 1-A
Buildings Description B2
Building No. : 2
Area No. : 1 No. of areas in this bldg. : 2
Building Usage : Warehouse 1 & 2
BUILDING GEOMETRY-Warehouse 1
Width (m)
106.000 Out to Out of Steel line
Length (m)
49.000 Out to Out of Steel line
Roof Slope
1:10
Height (m) from FFL
10.200 Clear Height at Eave
FFL height from NGL (m)
1.20 M
BUILDING GEOMETRY-Warehouse 2
Width (m)
97.700 Out to Out of Steel line
Length (m)
30.970 Out to Out of Steel line
Roof Slope
1:10
Height (m) from FFL
17.000 Clear Height at Eave
FFL height from NGL (m)
1.20 M
SECONDARY Z MEMBERS (Produced from pre-galvanized coils)
Sidewall girts framing
: By Pass
Sag Rods Location : Roof & Wall
Endwall girts framing
: By Pass
No. of Rows
: 1&2 (as per ADM) ;
TYPE OF BRACING (Bracing is achieved by Diagonal Members, Portal Frames or Minor Axis Bending)
Roof
Diagonal (Rods)
Exterior Sidewalls
Diagonal (Angles)
Between Interior Columns None
Endwalls
Diagonal (Angles)
OPENINGS IN EXTERIOR WALLS FOR warehouse 1 & 2
Front Side Wall @ grid 2-21,2-22 Open up to FFL to 4.00 M for: Block wall by others and above sheeted
Back Side Wall @ grid 2-AC, 2- Open up to FFL to 4.00 M for: Block wall by others and above sheeted
G
Left End Wall@ grid 2-A, 2-B
Open up to FFL to 4.00 M for: Block wall by others and above sheeted
Right End Wall@ grid 2-3, 2-13 Open up to FFL to 4.00 M for: Block wall by others and above sheeted
ical Bldgs. : 1
DM) ;
ove sheeted
ove sheeted
ove sheeted
ove sheeted
ical Bldgs. : 1
DM) ;
nor Axis Bending)