Professional Documents
Culture Documents
Users Guide
Page 1
Table of Contents
Page
Description
Title Page
Table of Contents
Introduction
Safety
Specifications
7-9
Getting Started
10
Replacement Parts
11
Troubleshooting Guide
12
Warranty
Page 2
Introduction
You have selected a high quality, highly reliable BEST PCBVac system. This system is
designed specifically for picking up the remnants from the PCB rework and repair
processes including cleaning out solder from plated throughholes, cleaning off scraped
solder mask or coating or remnant flux of cleaning solvents. In addition, liquids such as
cleaning solvents and fluxes can be vacuumed off the PCB.
This users guide will help you maximize the he usefulness of the PCBVac.
Please take a few minutes to become familiar with the controls and features of the
device. Follow our recommended testing procedures. Review the helpful information we
have included which is based on a combined 150+ years of PCB rework and repair
experience.
In the USA please call us at 847-797-9250 between 7:30AM-5:30 PM CST or visit
solder.net to send us an e-mail.
Page 3
Safety
Maximum Air Pressure
Maximum air input pressure 6.9bar (100psi). Excessive input air pressure may damage
the equipment
Read Manual
Read the Userss Guide for proper use of this equipment. Follow all safety instructions.
Task and equipment specific warnings, cautions and instructions are included in the
equipment documentation when appropriate. Make sure these instructions and all other
equipment documents are accessible to persons operating or servicing the equipment.
Page 4
Specifications
Cabinet dimensions:
Weight:
Cycle initiate:
ON/OFF Switch
Vaccum output
C to 45 C (41F to 113F)
85% RH at 30C non-condensing
Installation category II
Pollution degree 2
Page 5
Page 6
Getting Started
1) Unpack Unit
2) Connect Air Supply
Page 7
Page 8
7)
Begin moving hand piece to areas on PCB to remove wet and dry particles.
Page 9
Page 10
Replacement Parts
Item#
Part #
Part Description
PCBV-CP
PCBV-QCA
PCBV-PVCT
PCBV-TN
Teflon nozzle
PCBV-FSF
PCBV-GT
6 glass handpiece
PCBV-MT
Metal trap
PCBV-FE
Filter element
PCBV-RSF
10
PCBV-BGSA
11
PCBV-PT
12
PCBV-IAF
Page 11
Troubleshooting Guide
If there is little or no vacuum pressure are the work piece check the following:
1.
2.
3.
4.
Page 12
Warranty
This BEST PCBVac is warranted to the original end user for one year from date of
purchase. Within the period of this warranty BEST will repair or replace and defective
component r the entire assembly at BESTs option on authorized return of the part or
the complete vacuum system, prepaid to the factory.
In no event shall any liability or obligation of BEST arising from this warranty exceed
the purchase price of the equipment. Before using , user shall determine the suitability
of the product for its intended use assumes all risk and liability whatsoever in the
connection therewith.
BEST makes no warranty whatsoever of merchantability of fitness for a particular
purpose. In no event shall BEST be liable for incidental or consequential damages.
Page 13