Professional Documents
Culture Documents
Product name
GSM BSS
Product version
V00R01
Prepared by
Date
Reviewed by
Date
Reviewed by
Date
Granted by
Date
2015-05-09
Page 1 of 17
Revision Record
Date
Revision
version
2015-05-09
Change Description
Author
Page 2 of 17
2015-05-09
Full spelling
Page 3 of 17
Contents
1 Basic Principle................................................................5
1.1 Definition................................................................................................................................5
1.2 Theory Introduction.................................................................................................................5
1.3 Recommended Formula..........................................................................................................5
1.4 Signaling Procedure and Statistical Point...............................................................................5
2 Influencing Factors.........................................................6
3 Analysis Process and Optimization Methods.....................7
3.1 Analysis Process......................................................................................................................7
3.1.1 Procedures for RxQuality Problem Location.................................................................7
3.2 RxQuality Optimization Methods...........................................................................................8
3.2.1 Poor RxQuality on Entire Network................................................................................9
3.2.2 Passive Intermodulation...............................................................................................10
3.2.3 Intra-Network Interference..........................................................................................11
3.2.4 Inter-Network Interference..........................................................................................12
3.2.5 Hardware Fault.............................................................................................................12
3.2.6 Huawei Anti-Interference Technology.........................................................................14
3.2.7 Test Tool and Recommendations.................................................................................15
3.2.8 Recommendations for Configuration and Test............................................................15
5 Information Feedback...................................................17
5.1 TEMS Test Log of Faulty Cell..............................................................................................17
5.2 Requirements for Existing Network Configuration Data and Traffic Measurement............17
2015-05-09
Page 4 of 17
Basic Principle
1.1 Definition
The RxQuality is an informal KPI. It identifies the Bit Error Rate (BER) on
the Um interface based on the proportions of downlink RxQuality at various
levels. The RxQuality can reflect the entire network quality. When the
RxQuality is good and no major bug exists in voice processing, you can infer
that the voice quality on the network is good.
2015-05-09
Page 5 of 17
Influencing Factors
Network planning
Data configuration
Frequency planning
Coverage
Interference
Power control
UISS
ICC
2015-05-09
Page 6 of 17
2015-05-09
Page 7 of 17
Page 8 of 17
Inter-network interference
Clock fault
When the RxQuality is poor, the reasons for poor RxQuality are classified in
terms of the preceding factors. Then, the RxQuality is improved from two
perspectives. Check whether the poor RxQuality occurs on the entire network
or only in some cells or BTSs. If poor RxQuality occurs on the entire network,
causes are investigated in terms of internal network interference and external
network interference. If poor RxQuality only occurs in some cells or BTSs,
the procedures in section 3.1are taken to investigate the causes. The
RxQuality is improved by examining interference, modifying data
configuration, replacing some hardware, cleaning feeder and jumper
connectors, and replacing aged feeders.
2015-05-09
Page 9 of 17
Besides, on the network with high noise floor, the RxQuality can be greatly
improved by reducing the network noise floor and interference through the
power control.
If the preceding adjustments still cannot solve the problem, the latest R&D
results of the Performance Dept are applied. These R&D results include
synchronization network, ICC technology, and IBCA. The RxQuality is
improved without reducing the network capacity.
The maximum RxQuality is not the ultimate aim of the network optimization. The
ultimate goal is to enrich the customer experience according to different bandwidths,
capacity requirements, traffic models, and network scenarios.
2015-05-09
Page 10 of 17
2015-05-09
Page 11 of 17
2015-05-09
Page 12 of 17
GSM Interference
Analysis Guide 020429-A-1.0.zip
Page 13 of 17
Page 14 of 17
2015-05-09
Page 15 of 17
RxQuality Optimization
Cases
2015-05-09
Page 16 of 17
Information Feedback
2015-05-09
Page 17 of 17