unit cannot boot into OS or F9 cannot recovery, please try to update this firmware,L3/L4:when you have changed u3001 chipset, please update firmware, SOP please refer to Update SanDisk EMMC firmware to CS2.4 SOP)If didt
show Firmware version, please dont update this FW ,the EMMC maybe is Hynix ,please search from GSM to confirm.
WinPE please download from this way:
Public Folder
Bulletin
Notebook Technical Info.
FTP
Driver
Win PE
FWDL_CS2.4.zip
3.9 Axis Sensor Calibration (for L2/L3/L4, L3/L4: when you
have changed U4401(Gyro + G-Sensor) and U4402(ECompass), please update this firmware, SOP please refer to Calibration_sop) G-sensor, Gyros Sensor Galibration English version.rar
4. Light Sensor (for L2/L3/L4, L3/L4: when you have
changed Light Sensor, please update this firmware, SOP please refer to als_SOP ) ALS.rar
5.Touch panel Config /PID update(for L2/L3/L4, L2: if have
replaced LCD module/mainboard , you should use this tool to update firmware,L3/L4:when you have changed Atmel IC, please update this firmware, SOP please refer to ReadMe) M P_ASUS_T100TA.zip
6.Active 8G Flash (for L2/L3/L4,L2: when cannot F9
recovery os or build HDI cannot detect 8G flash, please try to use this tool to update.L3/L4:when you have changed 8G Flash, please update this firmware, SOP please refer to Activate 8G Flash) M PALL.zip
7.WIFI NVRAM update (for L3/L4 when you have changed
wifi/BT BCM43241,please update this firmware, SOP please refer to Readme) wlan_nvram_20130904.zip
8.WIFI/BT MAC update (for L3/L4 when you have changed
wifi/BT BCM43241,please update this firmware, SOP please refer to Readme) WIFI_M AC.zip
9. MCU FW Update (for L2/L3/L4,L2:when keyboard
cannot use, please try to update this firmware,L3/L4: when you have changed PU8201, PQ8201,PU9102, please update this firmware, SOP please refer to Readme) M CU_LoadFW-1.0.1.zip
10. Close manufactory mode (for L4,when you have
changed CPU/SOC, please try to update this firmware, SOP please refer to T100 Bootloader and Update firmware_SOP_0902) CLOSEM NF.rar
11. On board memory (for L3/L4,when you have changed
on board memory , SOP:TEST BIOS Disable Channel 1,USE ONLY CH0 to boot) T100TAF1217.rar