Professional Documents
Culture Documents
Piston Pump
280
290
Models
SPECIFICATIONS
U.S. Measure
Metric Measure
Flow..................................................................3.0 GPM
Pressure Range....................................100 to 1000 PSI
RPM ..............................................................1330 RPM
Stroke...................................................................0.394"
Weight...............................................................11.7 lbs.
(11.4 L/M)
(7 to 70 Bar)
(1330 RPM)
(10 mm)
(5.3 kg)
MODEL
FEATURES
Superior Design
280
Mechanically actuated inlet valves give strong lift and easy prime.
Flow..................................................................3.5 GPM
Pressure Range....................................100 to 1200 PSI
RPM ..............................................................1200 RPM
Stroke...................................................................0.472"
Weight...............................................................12.1 lbs.
COMMON SPECIFICATIONS
100% wetted seal design allows pumped liquid to cool and lubricate
for longer life.
Quality Materials
Cylinder and sleeve wear surfaces are hard chrome plated 304
stainless steel for maximum durability and abrasion resistance.
Easy Maintenance
MODEL 290
All wet-end wear parts are easily serviced without entering crankcase,
requiring less time and effort.
WARNING
(1/2" NPTF)
(1/4" NPTF)
(3/8" NPTF)
(1/2" NPTF)
(Either side)
(16.5 mm)
(270 x 223x 134.5 mm)
(275 x 223x 134.5 mm)
290
FLOW
PRESSURE
MOTOR PULLEY SIZE
PSI PSI PSI Using 1725 Nom.RPM Motor
800 1000 1200
& 5.0" Pump Pulley O.D.
U.S.
BAR BAR BAR
RPM
Pulley
GPM L/M
55
70
85
O.D.
3.0 11.4 1.6
2.1
N/A
1330
3.9
2.5
9.5
1.4
1.7
N/A
1108
3.2
2.0
7.6
1.1
1.4
N/A
887
2.8
3.5 13.2 1.9
2.4
2.9
1200
3.5
3.0 11.4 1.6
2.1
2.5
1029
3.0
2.5
9.5
1.4
1.7
2.1
858
2.5
DETERMINING
THE PUMP R.P.M.
All systems require both a primary pressure regulating device (i.e., regulator, unloader) and
a secondary pressure safety relief device (i.e., pop-off valve, safety valve). Failure to
install such relief devices could result in personal injury or damage to the pump or to
system components. CAT PUMPS does not assume any liability or responsibility for the
operation of a customers high pressure system.
Above 130F call CAT PUMPS for inlet conditions and elastomer recommendations.
280
(13.2 L/M)
(7 to 85 BAR)
(1200 RPM)
(12 mm)
(5.5 kg)
DETERMINING
THE REQUIRED H.P.
DETERMINING
MOTOR PULLEY SIZE
Rated G.P. M.
Rated R.P. M.
Desired G.P. M.
Desired R.P. M.
GPM x PSI
1460
Electric Brake
H. P. Required
See complete Drive Packages [Inclds: Pulleys, Belts, Hubs, Key] Tech Bulletin 003.
Refer to pump Service Manual for repair procedure, additional technical information and pump warranty.
PARTS LIST
ITEM
2
5
8
10
11
15
20
25
31
32
33
37
38
40
48
49
50
51
53
55
64
65
69
70
71
75
77
80
81
100
106
109
110
117
118
119
130
131
133
133
133
135
136
137
138
139
143
150
153
164
166
167
168
184
185
186
187
188
189
190
191
192
PART NUMBER
280 MATL
290 MATL
30047
92519
125824
27950
26536
24159
14487
122041
26239
828710
43211
14177
92241
44428
92520
126541
25625
23170
43339
43340
44658
126546
16948
29612
126259
25301
126189
25327
25392
28771
29614
29743
28597
30315
30325
22177
25128
25635
22160
27004
22021
43172
29089
27003
27002
27006
27000
14158
23172
11377
26961
26112
28774
43434
29487
43723
22842
43360
22031
43442
22841
24459
25634
15845
126232
26245
126565
126813
126576
43258
126590
43425
126591
26676
STL
STZP
STCP R
AL
NBR
NBR
STL R
TNM
FCM
ABS
NBR
NBR
STZP
STCP R
STCP
NBR
AL
NBR
AL
STCP R
CM
SZZ
STCP R
NBR
STCP R
S
NBR
FPM
SCP
S
PVDF
NBR
FPM
BBCP
BBCP
SS
BBCP
S
S
FPM
SNG
S
S
S
S
S
NBR
FPM
PTFE
SCP
S
S
S
S
S
S
S
S
S
BBCP
SS
STZP
STCP R
STZP
STCP R
STCP R
STCP R
STZP
STCP R
STZP
STCP R
S
30047
92519
125824
27950
26536
24159
14487
48867
43804
828710
43211
14177
92241
44428
92520
126541
25625
23170
43339
43340
44658
16948
101800
126259
25301
126189
25327
25392
28771
29614
29743
29003
28597
30315
30325
22177
25128
25635
85680
22160
27004
30543
30544
43172
43474
29089
27983
27002
27006
27000
14158
23172
11377
26961
101802
43834
21985
43434
29487
43723
22842
43360
22031
43442
22841
81109
126521
24459
25634
STL
STZP
STCP R
AL
NBR
NBR
STL R
TNM
FCM
ABS
NBR
NBR
STZP
STCP R
STCP
NBR
AL
NBR
AL
CM
SZZ
STCP R
NBR
STCP R
S
NBR
FPM
SCP
S
PTFE
PVDF
NBR
FPM
BBCP
BBCP
SS
STZP
BBCP
S
S
PTFE
FPM
FPM
SNG
S
S
S
S
S
NBR
FPM
PTFE
SCP
S
PTFE
S
S
S
S
S
S
S
S
STZP
STCP R
BBCP
SS
DESCRIPTION
Key (M5x5x24)
Screw, HHC Sems (M6x16)
Screw, HHC Sems (M6x16)
Cover, Bearing
O-Ring, Bearing Cover - 70D
Seal, Oil, Crankshaft
Bearing, Ball
Rod, Assy Connecting [280-8/02, 290-9/02]
Crankshaft
Protector, Oil Cap w/Foam Gasket
Cap, Oil Filler
O-Ring, Oil Filler Cap - 70D
Gauge, Oil Bubble w/Gasket - 80D
Gasket, Flat, Oil Gauge - 80D
Screw, HHC Sems (M6x20)
Screw, HHC Sems (M6x20)
Plug, Drain (1/4"x19BSP)
O-Ring, Drain Plug - 70D
Cover, Rear
O-Ring, Rear Cover
Crankcase, 4 Screws
Stud (M8x41.4)
Pin, Crosshead
Rod, Piston
Washer, Oil Seal
Seal, Oil - 80D
Washer, Oil Seal
Slinger, Barrier
O-Ring, Sleeve
O-Ring, Sleeve
Sleeve
Sleeve (Unchromed)
Back-up-Ring, Sleeve
Retainer, Seal
Seal, LPS, Prrrrrm-A-Lube
Seal, LPS, Prrrrrm-A-Lube
Plug HH (I/4" NPT)
Manifold, Inlet
Manifold, Inlet
Stud (M8x99.5)
Elbow (1/2" NPT)
Valve, Inlet
Piston
Bac-Cup Ring
Cup, Piston
Assy, Bac-Cup (Inclds: 130, 131, 133) (290 Only)
Cup, V-Hot
Spacer, Piston
Retainer, Piston
Washer, Conical (M6)
Nut (M6)
Cotterpin (M1.6x10)
O-Ring, Cylinder -70D
O-Ring, Cylinder -80D
O-Ring, Cylinder
Cylinder
Cylinder (Unchromed)
Back-Up-Ring, Cylinder
Seat, Q.V.
Seat, F.V.
Valve, Q.V.
Valve, F.V.
Spring, Q.V.
Spring, F.V.
Retainer, Spring, Q.V.
Retainer, Spring, F.V.
Nut, Hex (M8)
Nut, Hex (M8)
Manifold, Discharge
Manifold, Discharge
Lockwasher (M8)
Lockwasher (M8)
Bolt, Cylinder (M8x62.5)
Bolt, Cylinder (M8x62.5)
Shim (M8x13x1.0)
Shim (M8x13x0.5)
Shim (M8x13x0.3)
Shim (M8x13x0.3)
Shim (M8x13x2.0)
Shim (M8x13x2.0)
Lockwasher (M8)
QTY
1
8
8
2
2
2
2
3
1
1
1
1
1
1
4
4
1
1
1
1
1
2
3
3
3
3
3
3
6
6
3
3
3
3
3
3
1
1
1
2
1
3
3
3
3
3
3
3
3
3
3
3
6
6
3
3
3
3
3
3
3
3
3
3
3
3
2
2
1
1
2
2
2
2
2-4
2-4
2-4
2-4
2-4
2-4
2
EXPLODED VIEW
Models
Standard - 280, 290
Stainless Steel - 281, 291
February 2008
280 MATL
194
196
250
260
270
275
283
298
300
302
304
305
306
310
355
126201
22187
25130
30612
30246
30942
34334
34961
34964
30023
30202
30272
30431
30305
30686
30024
22130
6107
STCP R
BBCP
STCP
STZP
STL
STL
STZP
STZP
FPM
NBR
NBR
NBR
NBR
NBR
NBR
NY
290 MATL
126201
22187
25130
30612
30246
30942
34334
34961
34964
76023
30860
30272
30431
30305
30686
30024
22130
6107
STCP R
BBCP
STCP
STZP
STL
STL
STZP
STZP
FPM
NBR
NBR
NBR
NBR
NBR
NBR
NY
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Bold print part numbers are unique to a particular pump model. Italics are optional items. [ ] Date of latest production change. R Components comply with RoHS Directive.
See Tech Bulletins 002, 003, 012, 016, 017, 020, 024, 026, 030, 033, 034, 036, 074, 077 and 083 for additional information.
All Q.V. parts are necessary for conversions, Q.V. and F.V. parts cannot be mixed.
MATERIAL CODES (Not Part of Part Number): ABS=ABS Plastic AL=Aluminum BBCP=Brass/Chrome Plated CM=Chrome-moly FCM=Forged Chrome-moly
FPM=Fluorocarbon NBR=Medium Nitrile (Buna-N) NY=Nylon PTFE=Pure Polytetrafluoroethylene PVDF=Polyvinylidene Fluoride S=304SS SCP=304SS/Chrome Plated
SNG=Special Blend (Buna) SS=316SS STCP=Steel/Chrome Plated STL=Steel STZP=Steel/Zinc Plated SZZ=304SS/Zamak TNM=Special High Strength
8.79 (223)
2.28 (58)
2.66 (67.50)
6.00 (152.50)
5.04 (128.00)
.94 (24)
1.10 (28)
.650 (16.50)
5.30
(134.50)
2.32 (58.88)
2.95
(75)
1.30 (33)
5.968 (152)
3.94 (100)
1.57
(40)
1.97 (50)
4 - 09
.312 (8)
1.063
(27)
1.375
(35)
1.375
(35)
2.562
(65)
.79 (20)
.31 (8)
1.375
(35)
.79 (20)
3.94 (100.00)
4.98 (126.50)
4-M6 x 30
RAIL 26246
12
9
11
2
10
13
The stainless steel slinger provides backup protection for the crankcase seal, keeping pumped liquids out of the crankcase.
Products described hereon are covered by one or more of the following U.S. patents 3558244, 3652188, 3809508, 3920356, 3930756 and 5035580
World Headquarters
CAT PUMPS
1681 - 94th Lane N.E. Minneapolis, MN 55449 - 4324
Phone (763) 780-5440 FAX (763) 780-2958
e-mail: techsupport@catpumps.com
www.catpumps.com
International Inquiries