Professional Documents
Culture Documents
OneBase Diplexer
The Andrew Solutions Diplexer features extremely low insertion loss and high power handling
capability.
These diplexers use high performance bandpass filters to provide extremely low insertion loss, high
isolation, and high power handling capability in a compact, rugged, weatherproof housing. Sealing
gaskets provide protection from moisture ingress at all interfaces.
Provision has been made to allow dc bypass on all ports. Alternative bypass versions are also available.
The diplexer also allows the passthrough of AISG signals to enable its deployment in systems utilizing
remote electrical tilt (RET).
l
l
l
l
l
l
l
l
2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 1 of 4
June 27, 2013
Product Specifications
E11F05P82
OneBaseTwinDiplexer,DCS1800/UMTS2100,AISGcompatible,dcpassonallports
Electrical Specifications
dcPassthrough
Band1
3rdOrderIMDTestMethod
Two+43dBmcarriers
Band2
3rdOrderIMD,maximum
110dBm
3rdOrderIMD,typical
117dBm
IsolationBetweenPaths,minimum
50.0dB
LightningSurgeCurrent
3kA
LightningSurgeCurrentWaveform
10/350waveform
DCS1800
OperatingFrequencyBand
17101880MHz
InsertionLoss,maximum
0.30dB
InsertionLoss,typical
0.15dB
OutputPower,maximumcomposite
250W
ReturnLossatFrequencyBand,minimum 18dB@17101880MHz
ReturnLossatFrequencyBand,typical
20dB@17101880MHz
UMTS
OperatingFrequencyBand
19202170MHz
InsertionLoss,maximum
0.30dB
InsertionLoss,typical
0.15dB
OutputPower,maximumcomposite
250W
ReturnLossatFrequencyBand,minimum 18dB@19202170MHz
ReturnLossatFrequencyBand,typical
20dB@19202170MHz
2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 2 of 4
June 27, 2013
Product Specifications
E11F05P82
Block Diagram
General Specifications
ProductType
Diplexer
Application
Indoor
Includes
Mountinghardware
Outdoor
Mechanical Specifications
Color
Gray
ConnectorInterface
716DINFemale
ConnectorInterfaceStyle
Longneck
MountingPipeDiameter
40160mm
MountingPipeHardware
Bandclamps
Environmental Specifications
IngressProtectionTestMethod
IEC60529:2001,IP67
OperatingTemperature
40Cto+60C(40Fto+140F)
Dimensions
Depth
117.0mm | 4.6in
Height
149.0mm | 5.9in
Volume
2.5L
Width
145.0mm | 5.7in
Weight,withoutmountinghardware
3.5kg
7.7lb
Regulatory Compliance/Certifications
Agency
Classification
2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 3 of 4
June 27, 2013
Product Specifications
E11F05P82
ISO9001:2008
Designed,manufacturedand/ordistributedunderthisqualitymanagementsystem
2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 17, 2013
Page 4 of 4
June 27, 2013