Professional Documents
Culture Documents
PUSH
Remote control
AM loop antenna
Indoor FM antenna
YPAO microphone
within 6 m
(20 ft)
Ex.
Front speaker
Ex.
Ex.
Ex.
Center speaker
Surround speaker
Active subwoofer
Cable
External components
(for subwoofer)
TV
-1-
Connect and install as follows the first time you use this unit.
See the following explanations for the connections for each number.
TV
3
2
BD/DVD player
(recorder)
4
This unit
Front
speaker R
Front
speaker L
Subwoofer
Surround
speaker R
Center speaker
Surround
speaker L
-2-
Surround speaker
R
L
Caution:
Remove the AC power cord of this unit from the power outlet
before connecting the speakers.
Generally speaker cables consist of two parallel insulated
cables. One of these cables is a different color, or has a
line running along it, to indicate different polarity. Insert the
different colored (or lined) cable into the + (positive, red)
terminal on this unit and the speakers, and the other cable into
the - (minus, black) terminal.
Be careful that the core of the speaker cable does not touch
anything or come into contact with the metal areas of this
unit. This may damage this unit or the speakers. If the speaker
cables short circuit, CHECK SP WIRES! will appear on the
front panel display when this unit is switched on.
(U.S.A. and Canada models only) When connecting 6
speakers, set the speaker impedance to 6 on this unit before
making connections. Refer to Owners Manual for information
on settings.
SPEAKERS
HDMI 3
HDMI 4
FRONT
CENTER
SURROUND
SINGLE
SURROUND BACK
AUDIO
OUT
SUBWOOFER
PRE OUT
Center speaker
Subwoofer
FR
ON
1
4
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
MAX
Subwoofer examples
FR
ON
T
Banana plug
-3-
2 Connect a TV
Video input to this unit is output to a TV using output jacks of the
same kind.
Input
Output
HDMI
HDMI
COMPONENT
VIDEO
COMPONENT
VIDEO
VIDEO
VIDEO
HDMI input
Component
video input
Video input
If your TV has multiple inputs, connect with the following priority (A to C).
HDMI
HDMI
COMPONENT
VIDEO
PR
HDMI
PB
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
HDMI 2
VIDEO
HD
COMPONENT
VIDEO
COMPONENT
VIDEO
FM
GND AM
PR
PR
PR
PR
PB
75
PB
COMPONENT
VIDEO
PR
PB
PB
VIDEO
VIDEO
PB
Y
MONITOR OUT
VIDEO
VIDEO
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
( TV )
A 1
AV
AV
A 2
AV
A 3
AV
A 4
AV
A 5
A
AV
OUT
AV 6
A
V
AUDIO 1
AUDIO 2
Listening to TV audio
To playback TV audio on this unit, connect the TV audio output to this
unit.
Connect the following input jacks, matching the audio output jacks on
your TV. When viewing your TV, select the appropriate input source on
this unit.
OPTICAL
DOCK
COMPONENT
VIDEO
PR
Audio
output
PB
VIDEO
Y
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
( TV )
AV 1
AV 2
AV 3
AV 4
AV 5
AV1 or AV4
AV2 or AV3
Analog output
HDMI OUT
-4-
HDMI
HDMI
COMPONENT
VIDEO
PR
PB
(BD/DVD)
HDMI OUT
DOCK
HDMI 1
ANTENNA
FM
OPTICAL
PR
PR
PR
PB
PB
PB
HDMI 2
GND AM
PR
O
75
PB
VIDEO
VIDEO
HDMI 3
COMPONENT
VIDEO
COMPONENT
VIDEO
COMPONENT
VIDEO
MONITOR OUT
PR
PB
COAXIAL
C
OPTICAL
COAXIAL
COAXIAL
OPTICAL
(CD)
( TV )
AV 1
AV 2
AV 3
A
A 4
AV
AV 5
A 6
AV
A
AV
OUT
AUDIO 1
AUDIO 2
VIDEO
V
AUDIO
L
R
When playback, select the corresponding input source the jack is connected.
Connecting to HDMI1 allows you to select the HDMI input just by pressing the BD/DVD under SCENE key.
Connecting to AV3 allows you to select the AV3 input just by pressing the CD under SCENE key.
If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from
component video output jacks and audio from analog output jacks. Refer to Owners Manual for details.
VOLTAGE SELECTOR
To the power
outlet
VOLTAGE
SELECTOR
(Asia model)
Voltages are AC 220/230-240 V, 50/60 Hz.
AC power cable
Caution
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local voltage BEFORE plugging the
power cable into the AC wall outlet. Improper setting of
the VOLTAGE SELECTOR may cause damage to this
unit and create a potential fire hazard.
-5-
This unit
The headphones are removed.
Subwoofer
The power is turned on.
Volume is set to approximately half, and the cross-over frequency (if present) is set to maximum.
CROSSOVER/
HIGH CUT
VOLUME
MIN
MIN
MAX
MAX
Subwoofer examples
Place the supplied YPAO microphone at ear height in your listening position.
YPAO microphone
When positioning the microphone, we recommend that you use equipment that allows you to adjust the height (such as a tripod) as a
microphone stand. When using a tripod, use the tripod screws to fix the microphone in place.
Continues to
the next page
-6-
Connect the YPAO microphone to the YPAO MIC jack on the front panel.
CODE SET
TRANSMIT
SOURCE
RECEIVER
SLEEP
YPAO MIC
RECEIVER A
HDMI
V-AUX
V
VAUX
[ A ]
[ B ]
DOCK
PRESET
TUNING
INFO
A
AV
AUDIO
YPAO microphone
TUNER
MIC ON. YPAO START appears on the front panel display, and then changes to display the following.
YPAO
AM
MEMORY
MOVIE
MUSIC
VOL.
SW
C
R
L
SL
SR
SBL
SBR
bPressb[SETUP]
DIRECT
SCENE
BD
DVD
TV
CD
SETUP
This completes preparations. To achieve more accurate results, be careful of the following when
measuring.
Measuring will take approximately 3 minutes. Keep the room as quiet as possible during
measurement.
Wait in the corner of the listening room during measurement or leave it entirely, to avoid
becoming an obstruction between the speakers and the YPAO microphone.
FM
INFO
RADIO
SETUP
VOLUME
ENTER
OPTION
ENTER
RETURN
DISPLAY
A
POP-UP
MENU
TOP
MENU
MUTE
REC
10
ENT
TV
INPUT
Progress
YPAO
TV VOL
TV CH
MUTE
VOL.
Progress
SW
C
R
L
SL
SR
SBL
SBR
02%
YPAO
VOL.
YPAO Complete
L
SL
SW
C
R
SR
Note
When a problem occurs, an error message or a warning
message appears either during or after measurement. Refer
to Set up the speaker parameters automatically (YPAO) in
Owners Manual to solve the problem, and carry out YPAO again.
YPAO
VOL.
Disconnect MIC
L
SL
SW
C
R
SR
FM/AM tuner
- Simple preset tuning
- (U.K. and Europe models) Radio Data System tuning
- (U.K. and Europe models)
Automatic traffic information reception
- (Asia and General models only)
Changing FM/AM frequency steps initializing various
settings for this unit
YPAO MIC
INFO
etc.
-7-
Operation guide
YPAO MIC
DIRECT
INFO
MEMORY
PRESET
FM
AM
TUNING
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TV
TONE CONTROL
CD
PROGRAM
RADIO
VIDEO AUX
STRAIGHT
SILENT CINEMA
PORTABLE
VIDEO
AUDIO
TRANSMIT
SOURCE
RECEIVER
The name of the selected input source appears on the front panel display.
SLEEP
VOL.
HDMI1
HDMI
L
SL
SW
C
R
SR
AV
AUDIO
Remote
control
Description
[ B ]
DOCK
PRESET
TUNING
FM
AM
INFO
MEMORY
MOVIE
MUSIC
MUSIC
PROGRAM
STEREO
SUR. DECODE
TV
CD
SETUP
RETURN
RADIO
VOLUME
MUTE
DISPLAY
POP-UP
MENU
TOP
MENU
OPTION
ENTER
DIRECT
DIRECT
SCENE
BD
DVD
STRAIGHT
STEREO
STRAIGHT
STRAIGHT
ENHANCER
DIRECT
[ A ]
TUNER
MOVIE
V-AUX
REC
VOL.
Volume -18.5dB
L
SL
SW
C
R
SR
10
ENT
TV
INPUT
TV VOL
TV CH
MUTE
You can switch input sources and sound field programs with a single key.
SCENE
BD/DVD
TV
CD
RADIO
Input
HDMI 1
AV4
AV3
TUNER
- Pressing and holding this key allows you to store input sources/sound field programs.
- Press this key when this unit is in standby mode to switch on the unit.
Treble
VOL.
0.0dB
L
SL
SW
C
R
SR
- You can set the tone control for speakers and headphones separately. Connect the
headphones when adjusting the headphone tone control.
- If you set an extreme tone balance, sounds may not match those from other channels.
2010 Yamaha Corporation
-8-
YC504B0/QREN