Professional Documents
Culture Documents
1. Create and activate the D-Channel links for O&M and TRX
2. Create BCF
Assume that BCF number is 202, DNAME is as created in the O&M link:P202O)
#ZEFC:202,P:DNAME=P202O,::::;
Check the status of the BCF
#ZEEI:BCF=202:;
3. Create BTS
4. Create TRX
Take the D-Channel name and BTS Id from step 1 to create TRX
#ZERC:BTS=202,TRX=1:PREF=P,:FREQ=544,TSC=0,PCMTSC=361:DNAME=P2021:CH0=MBCCH,CH1=SDCCH,:;
NOTE: FREQ can be available in the lab support data, PCMTSL ET36 time slot 1
Useful commands
1. Check the software packages and active packages on the BSC
#ZWQO:CR;
2. Check the running packages on the BSC
#ZWQO:RUN;
3. To enable EGPRS on BTS (Before executing this command lock the BTS)
#ZEQV:BTS=202:EGENA=Y,;
4. Lock BTS (Assume BTS no. is 202)
#ZEQS:BTS=202:L:;
5. Modify D-Channel working status
#ZDTC:P2021:AD:;
6. Check the D-Channel signalling link status
ZDSB:NAME=P202%
NOTE:% takes any single character
7. Delete O&M link (Delete all TRX, BTS, BCF before deleting the following link)
#ZDSD:P202O:;
8. Delete BTS (Assume that BTS no. is 202, Before executing this command lock the BTS)
#ZEQD:BTS=202::;
9. Delete BCF (Assume that BCF no.202, Before executing this command delete BTS)
#ZEEI:BCF=202::;
10. Unlock TRX (Assume that BTS no. is 202)
#ZERS:BTS=202,TRX=1,:U:;
11. Unlock BTS (Assume that BTS no. is 202)
#ZEQS:BTS=202:U:;
12. Adjust Power (Assume that BTS no. is 202)
#ZEUG:BTS=202:PMIN=30,PMAX=30:;
13. BSC Network information
#ZEEL;
14. List the status of UNITS
#ZDTI;
General
ZAHO
ZEOL
ZUSI
A-Interface
ZNEL
ZNET
ZNHI
ZRCI
ZDRI
ZQWI
ZNRI
ZWGO
ZWGF
Alarms currently on
BTS alarms
Unit states
Abis-Interface
ZEEI
ZEFO
ZEQO
ZERO
ZEOL
ZDTI
ZRCI
ZDSB
ZRBI
ZEWL
ZEWO
ZEWP
Existing SW packages
SW configuration of BCF
Contents of SW packages
ZWQO:CR
ZWQH
BCF SW
BSC SW
General
ZAHO
ZUSI
A-Interface
ZNEL
ZNET
ZNHI
ZRCI
ZDRI
ZNRI
D-Channel states
Circuits / Circuits Groups
D-Channel parameters
MSC SW
ZWQO:CR
ZWQH
Alarms currently on
Unit states
HLR
ZMI_
ZMB_